Linux-libre 4.2.1-gnupck-4.2.1-gnu

10 files changed, 196 insertions, 36 deletions

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 59705ab23..c9357bb39 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -553,13 +553,11 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
 	spi_used_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536);
 	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
 
-	/* handle all the modes */
+	/* handle all the 3-wire mode */
 	if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
 		cs |= BCM2835_SPI_CS_REN;
-	if (spi->mode & SPI_CPOL)
-		cs |= BCM2835_SPI_CS_CPOL;
-	if (spi->mode & SPI_CPHA)
-		cs |= BCM2835_SPI_CS_CPHA;
+	else
+		cs &= ~BCM2835_SPI_CS_REN;
 
 	/* for gpio_cs set dummy CS so that no HW-CS get changed
 	 * we can not run this in bcm2835_spi_set_cs, as it does
@@ -592,6 +590,25 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
 	return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs);
 }
 
+static int bcm2835_spi_prepare_message(struct spi_master *master,
+				       struct spi_message *msg)
+{
+	struct spi_device *spi = msg->spi;
+	struct bcm2835_spi *bs = spi_master_get_devdata(master);
+	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+
+	cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA);
+
+	if (spi->mode & SPI_CPOL)
+		cs |= BCM2835_SPI_CS_CPOL;
+	if (spi->mode & SPI_CPHA)
+		cs |= BCM2835_SPI_CS_CPHA;
+
+	bcm2835_wr(bs, BCM2835_SPI_CS, cs);
+
+	return 0;
+}
+
 static void bcm2835_spi_handle_err(struct spi_master *master,
 				   struct spi_message *msg)
 {
@@ -739,6 +756,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
 	master->set_cs = bcm2835_spi_set_cs;
 	master->transfer_one = bcm2835_spi_transfer_one;
 	master->handle_err = bcm2835_spi_handle_err;
+	master->prepare_message = bcm2835_spi_prepare_message;
 	master->dev.of_node = pdev->dev.of_node;
 
 	bs = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h
index 06b34e5bc..47bb9b898 100644
--- a/drivers/spi/spi-bitbang-txrx.h
+++ b/drivers/spi/spi-bitbang-txrx.h
@@ -49,7 +49,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
 
-	bool oldbit = !(word & 1);
+	u32 oldbit = (!(word & (1<<(bits-1)))) << 31;
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
@@ -81,7 +81,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
 
-	bool oldbit = !(word & (1 << 31));
+	u32 oldbit = (!(word & (1<<(bits-1)))) << 31;
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index eb03e1215..7edede6e0 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -74,6 +74,9 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
 
+	of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+			     &dws->reg_io_width);
+
 	num_cs = 4;
 
 	if (pdev->dev.of_node)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 8d67d03c7..4fbfcdc5c 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -194,7 +194,7 @@ static void dw_writer(struct dw_spi *dws)
 			else
 				txw = *(u16 *)(dws->tx);
 		}
-		dw_writel(dws, DW_SPI_DR, txw);
+		dw_write_io_reg(dws, DW_SPI_DR, txw);
 		dws->tx += dws->n_bytes;
 	}
 }
@@ -205,7 +205,7 @@ static void dw_reader(struct dw_spi *dws)
 	u16 rxw;
 
 	while (max--) {
-		rxw = dw_readl(dws, DW_SPI_DR);
+		rxw = dw_read_io_reg(dws, DW_SPI_DR);
 		/* Care rx only if the transfer's original "rx" is not null */
 		if (dws->rx_end - dws->len) {
 			if (dws->n_bytes == 1)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 6c91391c1..b75ed327d 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -109,6 +109,7 @@ struct dw_spi {
 	u32			fifo_len;	/* depth of the FIFO buffer */
 	u32			max_freq;	/* max bus freq supported */
 
+	u32			reg_io_width;	/* DR I/O width in bytes */
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 
@@ -145,11 +146,45 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
 	return __raw_readl(dws->regs + offset);
 }
 
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+	return __raw_readw(dws->regs + offset);
+}
+
 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 {
 	__raw_writel(val, dws->regs + offset);
 }
 
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+	__raw_writew(val, dws->regs + offset);
+}
+
+static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		return dw_readw(dws, offset);
+	case 4:
+	default:
+		return dw_readl(dws, offset);
+	}
+}
+
+static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		dw_writew(dws, offset, val);
+		break;
+	case 4:
+	default:
+		dw_writel(dws, offset, val);
+		break;
+	}
+}
+
 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
 {
 	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index acce90ac7..bb916c8d4 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -105,6 +105,10 @@ struct img_spfi {
 	bool rx_dma_busy;
 };
 
+struct img_spfi_device_data {
+	bool gpio_requested;
+};
+
 static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
 {
 	return readl(spfi->regs + reg);
@@ -267,15 +271,15 @@ static int img_spfi_start_pio(struct spi_master *master,
 		cpu_relax();
 	}
 
-	ret = spfi_wait_all_done(spfi);
-	if (ret < 0)
-		return ret;
-
 	if (rx_bytes > 0 || tx_bytes > 0) {
 		dev_err(spfi->dev, "PIO transfer timed out\n");
 		return -ETIMEDOUT;
 	}
 
+	ret = spfi_wait_all_done(spfi);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -440,21 +444,50 @@ static int img_spfi_unprepare(struct spi_master *master,
 
 static int img_spfi_setup(struct spi_device *spi)
 {
-	int ret;
-
-	ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ?
-			       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
-			       dev_name(&spi->dev));
-	if (ret)
-		dev_err(&spi->dev, "can't request chipselect gpio %d\n",
+	int ret = -EINVAL;
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (!spfi_data) {
+		spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL);
+		if (!spfi_data)
+			return -ENOMEM;
+		spfi_data->gpio_requested = false;
+		spi_set_ctldata(spi, spfi_data);
+	}
+	if (!spfi_data->gpio_requested) {
+		ret = gpio_request_one(spi->cs_gpio,
+				       (spi->mode & SPI_CS_HIGH) ?
+				       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+				       dev_name(&spi->dev));
+		if (ret)
+			dev_err(&spi->dev, "can't request chipselect gpio %d\n",
 				spi->cs_gpio);
-
+		else
+			spfi_data->gpio_requested = true;
+	} else {
+		if (gpio_is_valid(spi->cs_gpio)) {
+			int mode = ((spi->mode & SPI_CS_HIGH) ?
+				    GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
+
+			ret = gpio_direction_output(spi->cs_gpio, mode);
+			if (ret)
+				dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
+					spi->cs_gpio, ret);
+		}
+	}
 	return ret;
 }
 
 static void img_spfi_cleanup(struct spi_device *spi)
 {
-	gpio_free(spi->cs_gpio);
+	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
+
+	if (spfi_data) {
+		if (spfi_data->gpio_requested)
+			gpio_free(spi->cs_gpio);
+		kfree(spfi_data);
+		spi_set_ctldata(spi, NULL);
+	}
 }
 
 static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 586738412..3d09e0b69 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -245,6 +245,7 @@ static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
 
 static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 {
+	struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
 	u32 l;
 
 	/* The controller handles the inverted chip selects
@@ -255,6 +256,12 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 		enable = !enable;
 
 	if (spi->controller_state) {
+		int err = pm_runtime_get_sync(mcspi->dev);
+		if (err < 0) {
+			dev_err(mcspi->dev, "failed to get sync: %d\n", err);
+			return;
+		}
+
 		l = mcspi_cached_chconf0(spi);
 
 		if (enable)
@@ -263,6 +270,9 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 			l |= OMAP2_MCSPI_CHCONF_FORCE;
 
 		mcspi_write_chconf0(spi, l);
+
+		pm_runtime_mark_last_busy(mcspi->dev);
+		pm_runtime_put_autosuspend(mcspi->dev);
 	}
 }
 
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 8cad107a5..a87cfd4ba 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -41,6 +41,11 @@
 #define ORION_SPI_DATA_OUT_REG		0x08
 #define ORION_SPI_DATA_IN_REG		0x0c
 #define ORION_SPI_INT_CAUSE_REG		0x10
+#define ORION_SPI_TIMING_PARAMS_REG	0x18
+
+#define ORION_SPI_TMISO_SAMPLE_MASK	(0x3 << 6)
+#define ORION_SPI_TMISO_SAMPLE_1	(1 << 6)
+#define ORION_SPI_TMISO_SAMPLE_2	(2 << 6)
 
 #define ORION_SPI_MODE_CPOL		(1 << 11)
 #define ORION_SPI_MODE_CPHA		(1 << 12)
@@ -70,6 +75,7 @@ struct orion_spi_dev {
 	unsigned int		min_divisor;
 	unsigned int		max_divisor;
 	u32			prescale_mask;
+	bool			is_errata_50mhz_ac;
 };
 
 struct orion_spi {
@@ -195,6 +201,41 @@ orion_spi_mode_set(struct spi_device *spi)
 	writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
 }
 
+static void
+orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed)
+{
+	u32 reg;
+	struct orion_spi *orion_spi;
+
+	orion_spi = spi_master_get_devdata(spi->master);
+
+	/*
+	 * Erratum description: (Erratum NO. FE-9144572) The device
+	 * SPI interface supports frequencies of up to 50 MHz.
+	 * However, due to this erratum, when the device core clock is
+	 * 250 MHz and the SPI interfaces is configured for 50MHz SPI
+	 * clock and CPOL=CPHA=1 there might occur data corruption on
+	 * reads from the SPI device.
+	 * Erratum Workaround:
+	 * Work in one of the following configurations:
+	 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration
+	 * Register".
+	 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1
+	 * Register" before setting the interface.
+	 */
+	reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+	reg &= ~ORION_SPI_TMISO_SAMPLE_MASK;
+
+	if (clk_get_rate(orion_spi->clk) == 250000000 &&
+			speed == 50000000 && spi->mode & SPI_CPOL &&
+			spi->mode & SPI_CPHA)
+		reg |= ORION_SPI_TMISO_SAMPLE_2;
+	else
+		reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */
+
+	writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG));
+}
+
 /*
  * called only when no transfer is active on the bus
  */
@@ -216,6 +257,9 @@ orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	orion_spi_mode_set(spi);
 
+	if (orion_spi->devdata->is_errata_50mhz_ac)
+		orion_spi_50mhz_ac_timing_erratum(spi, speed);
+
 	rc = orion_spi_baudrate_set(spi, speed);
 	if (rc)
 		return rc;
@@ -413,6 +457,14 @@ static const struct orion_spi_dev armada_375_spi_dev_data = {
 	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
 };
 
+static const struct orion_spi_dev armada_380_spi_dev_data = {
+	.typ = ARMADA_SPI,
+	.max_hz = 50000000,
+	.max_divisor = 1920,
+	.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
+	.is_errata_50mhz_ac = true,
+};
+
 static const struct of_device_id orion_spi_of_match_table[] = {
 	{
 		.compatible = "marvell,orion-spi",
@@ -428,7 +480,7 @@ static const struct of_device_id orion_spi_of_match_table[] = {
 	},
 	{
 		.compatible = "marvell,armada-380-spi",
-		.data = &armada_xp_spi_dev_data,
+		.data = &armada_380_spi_dev_data,
 	},
 	{
 		.compatible = "marvell,armada-390-spi",
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index d3370a612..a7629f8ed 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -48,8 +48,8 @@ struct sh_msiof_spi_priv {
 	const struct sh_msiof_chipdata *chipdata;
 	struct sh_msiof_spi_info *info;
 	struct completion done;
-	int tx_fifo_size;
-	int rx_fifo_size;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
 	void *tx_dma_page;
 	void *rx_dma_page;
 	dma_addr_t tx_dma_addr;
@@ -95,8 +95,6 @@ struct sh_msiof_spi_priv {
 #define MDR2_WDLEN1(i)	(((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */
 #define MDR2_GRPMASK1	0x00000001 /* Group Output Mask 1 (SH, A1) */
 
-#define MAX_WDLEN	256U
-
 /* TSCR and RSCR */
 #define SCR_BRPS_MASK	    0x1f00 /* Prescaler Setting (1-32) */
 #define SCR_BRPS(i)	(((i) - 1) << 8)
@@ -850,7 +848,12 @@ static int sh_msiof_transfer_one(struct spi_master *master,
 		 *  DMA supports 32-bit words only, hence pack 8-bit and 16-bit
 		 *  words, with byte resp. word swapping.
 		 */
-		unsigned int l = min(len, MAX_WDLEN * 4);
+		unsigned int l = 0;
+
+		if (tx_buf)
+			l = min(len, p->tx_fifo_size * 4);
+		if (rx_buf)
+			l = min(len, p->rx_fifo_size * 4);
 
 		if (bits <= 8) {
 			if (l & 3)
@@ -963,7 +966,7 @@ static const struct sh_msiof_chipdata sh_data = {
 
 static const struct sh_msiof_chipdata r8a779x_data = {
 	.tx_fifo_size = 64,
-	.rx_fifo_size = 256,
+	.rx_fifo_size = 64,
 	.master_flags = SPI_MASTER_MUST_TX,
 };
 
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index 133f53a9c..a339c1e99 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -249,19 +249,23 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 	xspi->tx_ptr = t->tx_buf;
 	xspi->rx_ptr = t->rx_buf;
 	remaining_words = t->len / xspi->bytes_per_word;
-	reinit_completion(&xspi->done);
 
 	if (xspi->irq >= 0 &&  remaining_words > xspi->buffer_size) {
+		u32 isr;
 		use_irq = true;
-		xspi->write_fn(XSPI_INTR_TX_EMPTY,
-				xspi->regs + XIPIF_V123B_IISR_OFFSET);
-		/* Enable the global IPIF interrupt */
-		xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
-				xspi->regs + XIPIF_V123B_DGIER_OFFSET);
 		/* Inhibit irq to avoid spurious irqs on tx_empty*/
 		cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
 		xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
 			       xspi->regs + XSPI_CR_OFFSET);
+		/* ACK old irqs (if any) */
+		isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
+		if (isr)
+			xspi->write_fn(isr,
+				       xspi->regs + XIPIF_V123B_IISR_OFFSET);
+		/* Enable the global IPIF interrupt */
+		xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
+				xspi->regs + XIPIF_V123B_DGIER_OFFSET);
+		reinit_completion(&xspi->done);
 	}
 
 	while (remaining_words) {
@@ -302,8 +306,10 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 		remaining_words -= n_words;
 	}
 
-	if (use_irq)
+	if (use_irq) {
 		xspi->write_fn(0, xspi->regs + XIPIF_V123B_DGIER_OFFSET);
+		xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
+	}
 
 	return t->len;
 }