Initial import

1 files changed, 114 insertions, 0 deletions

diff --git a/drivers/staging/comedi/drivers/amplc_pci263.c b/drivers/staging/comedi/drivers/amplc_pci263.c
new file mode 100644
index 000000000..b6768aa90
--- /dev/null
+++ b/drivers/staging/comedi/drivers/amplc_pci263.c
@@ -0,0 +1,114 @@
+/*
+    comedi/drivers/amplc_pci263.c
+    Driver for Amplicon PCI263 relay board.
+
+    Copyright (C) 2002 MEV Ltd. <http://www.mev.co.uk/>
+
+    COMEDI - Linux Control and Measurement Device Interface
+    Copyright (C) 2000 David A. Schleef <ds@schleef.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*/
+/*
+Driver: amplc_pci263
+Description: Amplicon PCI263
+Author: Ian Abbott <abbotti@mev.co.uk>
+Devices: [Amplicon] PCI263 (amplc_pci263)
+Updated: Fri, 12 Apr 2013 15:19:36 +0100
+Status: works
+
+Configuration options: not applicable, uses PCI auto config
+
+The board appears as one subdevice, with 16 digital outputs, each
+connected to a reed-relay. Relay contacts are closed when output is 1.
+The state of the outputs can be read.
+*/
+
+#include <linux/module.h>
+
+#include "../comedi_pci.h"
+
+static int pci263_do_insn_bits(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn,
+			       unsigned int *data)
+{
+	if (comedi_dio_update_state(s, data)) {
+		outb(s->state & 0xff, dev->iobase);
+		outb((s->state >> 8) & 0xff, dev->iobase + 1);
+	}
+
+	data[1] = s->state;
+
+	return insn->n;
+}
+
+static int pci263_auto_attach(struct comedi_device *dev,
+			      unsigned long context_unused)
+{
+	struct pci_dev *pci_dev = comedi_to_pci_dev(dev);
+	struct comedi_subdevice *s;
+	int ret;
+
+	ret = comedi_pci_enable(dev);
+	if (ret)
+		return ret;
+
+	dev->iobase = pci_resource_start(pci_dev, 2);
+	ret = comedi_alloc_subdevices(dev, 1);
+	if (ret)
+		return ret;
+
+	s = &dev->subdevices[0];
+	/* digital output subdevice */
+	s->type = COMEDI_SUBD_DO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = 16;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = pci263_do_insn_bits;
+	/* read initial relay state */
+	s->state = inb(dev->iobase) | (inb(dev->iobase + 1) << 8);
+
+	return 0;
+}
+
+static struct comedi_driver amplc_pci263_driver = {
+	.driver_name	= "amplc_pci263",
+	.module		= THIS_MODULE,
+	.auto_attach	= pci263_auto_attach,
+	.detach		= comedi_pci_detach,
+};
+
+static const struct pci_device_id pci263_pci_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, 0x000c) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, pci263_pci_table);
+
+static int amplc_pci263_pci_probe(struct pci_dev *dev,
+				  const struct pci_device_id *id)
+{
+	return comedi_pci_auto_config(dev, &amplc_pci263_driver,
+				      id->driver_data);
+}
+
+static struct pci_driver amplc_pci263_pci_driver = {
+	.name		= "amplc_pci263",
+	.id_table	= pci263_pci_table,
+	.probe		= &amplc_pci263_pci_probe,
+	.remove		= comedi_pci_auto_unconfig,
+};
+module_comedi_pci_driver(amplc_pci263_driver, amplc_pci263_pci_driver);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi driver for Amplicon PCI263 relay board");
+MODULE_LICENSE("GPL");