diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-03-25 03:53:42 -0300 |
commit | 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch) | |
tree | fa581f6dc1c0596391690d1f67eceef3af8246dc /drivers/staging/iio/iio_simple_dummy.c | |
parent | d4e493caf788ef44982e131ff9c786546904d934 (diff) |
Linux-libre 4.5-gnu
Diffstat (limited to 'drivers/staging/iio/iio_simple_dummy.c')
-rw-r--r-- | drivers/staging/iio/iio_simple_dummy.c | 747 |
1 files changed, 0 insertions, 747 deletions
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c deleted file mode 100644 index 43fe4ba7d..000000000 --- a/drivers/staging/iio/iio_simple_dummy.c +++ /dev/null @@ -1,747 +0,0 @@ -/** - * Copyright (c) 2011 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * A reference industrial I/O driver to illustrate the functionality available. - * - * There are numerous real drivers to illustrate the finer points. - * The purpose of this driver is to provide a driver with far more comments - * and explanatory notes than any 'real' driver would have. - * Anyone starting out writing an IIO driver should first make sure they - * understand all of this driver except those bits specifically marked - * as being present to allow us to 'fake' the presence of hardware. - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/events.h> -#include <linux/iio/buffer.h> -#include "iio_simple_dummy.h" - -/* - * A few elements needed to fake a bus for this driver - * Note instances parameter controls how many of these - * dummy devices are registered. - */ -static unsigned instances = 1; -module_param(instances, uint, 0); - -/* Pointer array used to fake bus elements */ -static struct iio_dev **iio_dummy_devs; - -/* Fake a name for the part number, usually obtained from the id table */ -static const char *iio_dummy_part_number = "iio_dummy_part_no"; - -/** - * struct iio_dummy_accel_calibscale - realworld to register mapping - * @val: first value in read_raw - here integer part. - * @val2: second value in read_raw etc - here micro part. - * @regval: register value - magic device specific numbers. - */ -struct iio_dummy_accel_calibscale { - int val; - int val2; - int regval; /* what would be written to hardware */ -}; - -static const struct iio_dummy_accel_calibscale dummy_scales[] = { - { 0, 100, 0x8 }, /* 0.000100 */ - { 0, 133, 0x7 }, /* 0.000133 */ - { 733, 13, 0x9 }, /* 733.000013 */ -}; - -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - -/* - * simple event - triggered when value rises above - * a threshold - */ -static const struct iio_event_spec iio_dummy_event = { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), -}; - -/* - * simple step detect event - triggered when a step is detected - */ -static const struct iio_event_spec step_detect_event = { - .type = IIO_EV_TYPE_CHANGE, - .dir = IIO_EV_DIR_NONE, - .mask_separate = BIT(IIO_EV_INFO_ENABLE), -}; - -/* - * simple transition event - triggered when the reported running confidence - * value rises above a threshold value - */ -static const struct iio_event_spec iio_running_event = { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), -}; - -/* - * simple transition event - triggered when the reported walking confidence - * value falls under a threshold value - */ -static const struct iio_event_spec iio_walking_event = { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_FALLING, - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), -}; -#endif - -/* - * iio_dummy_channels - Description of available channels - * - * This array of structures tells the IIO core about what the device - * actually provides for a given channel. - */ -static const struct iio_chan_spec iio_dummy_channels[] = { - /* indexed ADC channel in_voltage0_raw etc */ - { - .type = IIO_VOLTAGE, - /* Channel has a numeric index of 0 */ - .indexed = 1, - .channel = 0, - /* What other information is available? */ - .info_mask_separate = - /* - * in_voltage0_raw - * Raw (unscaled no bias removal etc) measurement - * from the device. - */ - BIT(IIO_CHAN_INFO_RAW) | - /* - * in_voltage0_offset - * Offset for userspace to apply prior to scale - * when converting to standard units (microvolts) - */ - BIT(IIO_CHAN_INFO_OFFSET) | - /* - * in_voltage0_scale - * Multipler for userspace to apply post offset - * when converting to standard units (microvolts) - */ - BIT(IIO_CHAN_INFO_SCALE), - /* - * sampling_frequency - * The frequency in Hz at which the channels are sampled - */ - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), - /* The ordering of elements in the buffer via an enum */ - .scan_index = DUMMY_INDEX_VOLTAGE_0, - .scan_type = { /* Description of storage in buffer */ - .sign = 'u', /* unsigned */ - .realbits = 13, /* 13 bits */ - .storagebits = 16, /* 16 bits used for storage */ - .shift = 0, /* zero shift */ - }, -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - .event_spec = &iio_dummy_event, - .num_event_specs = 1, -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ - }, - /* Differential ADC channel in_voltage1-voltage2_raw etc*/ - { - .type = IIO_VOLTAGE, - .differential = 1, - /* - * Indexing for differential channels uses channel - * for the positive part, channel2 for the negative. - */ - .indexed = 1, - .channel = 1, - .channel2 = 2, - /* - * in_voltage1-voltage2_raw - * Raw (unscaled no bias removal etc) measurement - * from the device. - */ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - /* - * in_voltage-voltage_scale - * Shared version of scale - shared by differential - * input channels of type IIO_VOLTAGE. - */ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - /* - * sampling_frequency - * The frequency in Hz at which the channels are sampled - */ - .scan_index = DUMMY_INDEX_DIFFVOLTAGE_1M2, - .scan_type = { /* Description of storage in buffer */ - .sign = 's', /* signed */ - .realbits = 12, /* 12 bits */ - .storagebits = 16, /* 16 bits used for storage */ - .shift = 0, /* zero shift */ - }, - }, - /* Differential ADC channel in_voltage3-voltage4_raw etc*/ - { - .type = IIO_VOLTAGE, - .differential = 1, - .indexed = 1, - .channel = 3, - .channel2 = 4, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), - .scan_index = DUMMY_INDEX_DIFFVOLTAGE_3M4, - .scan_type = { - .sign = 's', - .realbits = 11, - .storagebits = 16, - .shift = 0, - }, - }, - /* - * 'modified' (i.e. axis specified) acceleration channel - * in_accel_z_raw - */ - { - .type = IIO_ACCEL, - .modified = 1, - /* Channel 2 is use for modifiers */ - .channel2 = IIO_MOD_X, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - /* - * Internal bias and gain correction values. Applied - * by the hardware or driver prior to userspace - * seeing the readings. Typically part of hardware - * calibration. - */ - BIT(IIO_CHAN_INFO_CALIBSCALE) | - BIT(IIO_CHAN_INFO_CALIBBIAS), - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), - .scan_index = DUMMY_INDEX_ACCELX, - .scan_type = { /* Description of storage in buffer */ - .sign = 's', /* signed */ - .realbits = 16, /* 16 bits */ - .storagebits = 16, /* 16 bits used for storage */ - .shift = 0, /* zero shift */ - }, - }, - /* - * Convenience macro for timestamps. 4 is the index in - * the buffer. - */ - IIO_CHAN_SOFT_TIMESTAMP(4), - /* DAC channel out_voltage0_raw */ - { - .type = IIO_VOLTAGE, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .scan_index = -1, /* No buffer support */ - .output = 1, - .indexed = 1, - .channel = 0, - }, - { - .type = IIO_STEPS, - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_ENABLE) | - BIT(IIO_CHAN_INFO_CALIBHEIGHT), - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .scan_index = -1, /* No buffer support */ -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - .event_spec = &step_detect_event, - .num_event_specs = 1, -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ - }, - { - .type = IIO_ACTIVITY, - .modified = 1, - .channel2 = IIO_MOD_RUNNING, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .scan_index = -1, /* No buffer support */ -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - .event_spec = &iio_running_event, - .num_event_specs = 1, -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ - }, - { - .type = IIO_ACTIVITY, - .modified = 1, - .channel2 = IIO_MOD_WALKING, - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), - .scan_index = -1, /* No buffer support */ -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - .event_spec = &iio_walking_event, - .num_event_specs = 1, -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ - }, -}; - -/** - * iio_dummy_read_raw() - data read function. - * @indio_dev: the struct iio_dev associated with this device instance - * @chan: the channel whose data is to be read - * @val: first element of returned value (typically INT) - * @val2: second element of returned value (typically MICRO) - * @mask: what we actually want to read as per the info_mask_* - * in iio_chan_spec. - */ -static int iio_dummy_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - struct iio_dummy_state *st = iio_priv(indio_dev); - int ret = -EINVAL; - - mutex_lock(&st->lock); - switch (mask) { - case IIO_CHAN_INFO_RAW: /* magic value - channel value read */ - switch (chan->type) { - case IIO_VOLTAGE: - if (chan->output) { - /* Set integer part to cached value */ - *val = st->dac_val; - ret = IIO_VAL_INT; - } else if (chan->differential) { - if (chan->channel == 1) - *val = st->differential_adc_val[0]; - else - *val = st->differential_adc_val[1]; - ret = IIO_VAL_INT; - } else { - *val = st->single_ended_adc_val; - ret = IIO_VAL_INT; - } - break; - case IIO_ACCEL: - *val = st->accel_val; - ret = IIO_VAL_INT; - break; - default: - break; - } - break; - case IIO_CHAN_INFO_PROCESSED: - switch (chan->type) { - case IIO_STEPS: - *val = st->steps; - ret = IIO_VAL_INT; - break; - case IIO_ACTIVITY: - switch (chan->channel2) { - case IIO_MOD_RUNNING: - *val = st->activity_running; - ret = IIO_VAL_INT; - break; - case IIO_MOD_WALKING: - *val = st->activity_walking; - ret = IIO_VAL_INT; - break; - default: - break; - } - break; - default: - break; - } - break; - case IIO_CHAN_INFO_OFFSET: - /* only single ended adc -> 7 */ - *val = 7; - ret = IIO_VAL_INT; - break; - case IIO_CHAN_INFO_SCALE: - switch (chan->type) { - case IIO_VOLTAGE: - switch (chan->differential) { - case 0: - /* only single ended adc -> 0.001333 */ - *val = 0; - *val2 = 1333; - ret = IIO_VAL_INT_PLUS_MICRO; - break; - case 1: - /* all differential adc -> 0.000001344 */ - *val = 0; - *val2 = 1344; - ret = IIO_VAL_INT_PLUS_NANO; - } - break; - default: - break; - } - break; - case IIO_CHAN_INFO_CALIBBIAS: - /* only the acceleration axis - read from cache */ - *val = st->accel_calibbias; - ret = IIO_VAL_INT; - break; - case IIO_CHAN_INFO_CALIBSCALE: - *val = st->accel_calibscale->val; - *val2 = st->accel_calibscale->val2; - ret = IIO_VAL_INT_PLUS_MICRO; - break; - case IIO_CHAN_INFO_SAMP_FREQ: - *val = 3; - *val2 = 33; - ret = IIO_VAL_INT_PLUS_NANO; - break; - case IIO_CHAN_INFO_ENABLE: - switch (chan->type) { - case IIO_STEPS: - *val = st->steps_enabled; - ret = IIO_VAL_INT; - break; - default: - break; - } - break; - case IIO_CHAN_INFO_CALIBHEIGHT: - switch (chan->type) { - case IIO_STEPS: - *val = st->height; - ret = IIO_VAL_INT; - break; - default: - break; - } - break; - - default: - break; - } - mutex_unlock(&st->lock); - return ret; -} - -/** - * iio_dummy_write_raw() - data write function. - * @indio_dev: the struct iio_dev associated with this device instance - * @chan: the channel whose data is to be written - * @val: first element of value to set (typically INT) - * @val2: second element of value to set (typically MICRO) - * @mask: what we actually want to write as per the info_mask_* - * in iio_chan_spec. - * - * Note that all raw writes are assumed IIO_VAL_INT and info mask elements - * are assumed to be IIO_INT_PLUS_MICRO unless the callback write_raw_get_fmt - * in struct iio_info is provided by the driver. - */ -static int iio_dummy_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - int i; - int ret = 0; - struct iio_dummy_state *st = iio_priv(indio_dev); - - switch (mask) { - case IIO_CHAN_INFO_RAW: - switch (chan->type) { - case IIO_VOLTAGE: - if (chan->output == 0) - return -EINVAL; - - /* Locking not required as writing single value */ - mutex_lock(&st->lock); - st->dac_val = val; - mutex_unlock(&st->lock); - return 0; - default: - return -EINVAL; - } - case IIO_CHAN_INFO_PROCESSED: - switch (chan->type) { - case IIO_STEPS: - mutex_lock(&st->lock); - st->steps = val; - mutex_unlock(&st->lock); - return 0; - case IIO_ACTIVITY: - if (val < 0) - val = 0; - if (val > 100) - val = 100; - switch (chan->channel2) { - case IIO_MOD_RUNNING: - st->activity_running = val; - return 0; - case IIO_MOD_WALKING: - st->activity_walking = val; - return 0; - default: - return -EINVAL; - } - break; - default: - return -EINVAL; - } - case IIO_CHAN_INFO_CALIBSCALE: - mutex_lock(&st->lock); - /* Compare against table - hard matching here */ - for (i = 0; i < ARRAY_SIZE(dummy_scales); i++) - if (val == dummy_scales[i].val && - val2 == dummy_scales[i].val2) - break; - if (i == ARRAY_SIZE(dummy_scales)) - ret = -EINVAL; - else - st->accel_calibscale = &dummy_scales[i]; - mutex_unlock(&st->lock); - return ret; - case IIO_CHAN_INFO_CALIBBIAS: - mutex_lock(&st->lock); - st->accel_calibbias = val; - mutex_unlock(&st->lock); - return 0; - case IIO_CHAN_INFO_ENABLE: - switch (chan->type) { - case IIO_STEPS: - mutex_lock(&st->lock); - st->steps_enabled = val; - mutex_unlock(&st->lock); - return 0; - default: - return -EINVAL; - } - case IIO_CHAN_INFO_CALIBHEIGHT: - switch (chan->type) { - case IIO_STEPS: - st->height = val; - return 0; - default: - return -EINVAL; - } - - default: - return -EINVAL; - } -} - -/* - * Device type specific information. - */ -static const struct iio_info iio_dummy_info = { - .driver_module = THIS_MODULE, - .read_raw = &iio_dummy_read_raw, - .write_raw = &iio_dummy_write_raw, -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS - .read_event_config = &iio_simple_dummy_read_event_config, - .write_event_config = &iio_simple_dummy_write_event_config, - .read_event_value = &iio_simple_dummy_read_event_value, - .write_event_value = &iio_simple_dummy_write_event_value, -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ -}; - -/** - * iio_dummy_init_device() - device instance specific init - * @indio_dev: the iio device structure - * - * Most drivers have one of these to set up default values, - * reset the device to known state etc. - */ -static int iio_dummy_init_device(struct iio_dev *indio_dev) -{ - struct iio_dummy_state *st = iio_priv(indio_dev); - - st->dac_val = 0; - st->single_ended_adc_val = 73; - st->differential_adc_val[0] = 33; - st->differential_adc_val[1] = -34; - st->accel_val = 34; - st->accel_calibbias = -7; - st->accel_calibscale = &dummy_scales[0]; - st->steps = 47; - st->activity_running = 98; - st->activity_walking = 4; - - return 0; -} - -/** - * iio_dummy_probe() - device instance probe - * @index: an id number for this instance. - * - * Arguments are bus type specific. - * I2C: iio_dummy_probe(struct i2c_client *client, - * const struct i2c_device_id *id) - * SPI: iio_dummy_probe(struct spi_device *spi) - */ -static int iio_dummy_probe(int index) -{ - int ret; - struct iio_dev *indio_dev; - struct iio_dummy_state *st; - - /* - * Allocate an IIO device. - * - * This structure contains all generic state - * information about the device instance. - * It also has a region (accessed by iio_priv() - * for chip specific state information. - */ - indio_dev = iio_device_alloc(sizeof(*st)); - if (!indio_dev) { - ret = -ENOMEM; - goto error_ret; - } - - st = iio_priv(indio_dev); - mutex_init(&st->lock); - - iio_dummy_init_device(indio_dev); - /* - * With hardware: Set the parent device. - * indio_dev->dev.parent = &spi->dev; - * indio_dev->dev.parent = &client->dev; - */ - - /* - * Make the iio_dev struct available to remove function. - * Bus equivalents - * i2c_set_clientdata(client, indio_dev); - * spi_set_drvdata(spi, indio_dev); - */ - iio_dummy_devs[index] = indio_dev; - - /* - * Set the device name. - * - * This is typically a part number and obtained from the module - * id table. - * e.g. for i2c and spi: - * indio_dev->name = id->name; - * indio_dev->name = spi_get_device_id(spi)->name; - */ - indio_dev->name = iio_dummy_part_number; - - /* Provide description of available channels */ - indio_dev->channels = iio_dummy_channels; - indio_dev->num_channels = ARRAY_SIZE(iio_dummy_channels); - - /* - * Provide device type specific interface functions and - * constant data. - */ - indio_dev->info = &iio_dummy_info; - - /* Specify that device provides sysfs type interfaces */ - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = iio_simple_dummy_events_register(indio_dev); - if (ret < 0) - goto error_free_device; - - ret = iio_simple_dummy_configure_buffer(indio_dev); - if (ret < 0) - goto error_unregister_events; - - ret = iio_device_register(indio_dev); - if (ret < 0) - goto error_unconfigure_buffer; - - return 0; -error_unconfigure_buffer: - iio_simple_dummy_unconfigure_buffer(indio_dev); -error_unregister_events: - iio_simple_dummy_events_unregister(indio_dev); -error_free_device: - iio_device_free(indio_dev); -error_ret: - return ret; -} - -/** - * iio_dummy_remove() - device instance removal function - * @index: device index. - * - * Parameters follow those of iio_dummy_probe for buses. - */ -static void iio_dummy_remove(int index) -{ - /* - * Get a pointer to the device instance iio_dev structure - * from the bus subsystem. E.g. - * struct iio_dev *indio_dev = i2c_get_clientdata(client); - * struct iio_dev *indio_dev = spi_get_drvdata(spi); - */ - struct iio_dev *indio_dev = iio_dummy_devs[index]; - - /* Unregister the device */ - iio_device_unregister(indio_dev); - - /* Device specific code to power down etc */ - - /* Buffered capture related cleanup */ - iio_simple_dummy_unconfigure_buffer(indio_dev); - - iio_simple_dummy_events_unregister(indio_dev); - - /* Free all structures */ - iio_device_free(indio_dev); -} - -/** - * iio_dummy_init() - device driver registration - * - * Varies depending on bus type of the device. As there is no device - * here, call probe directly. For information on device registration - * i2c: - * Documentation/i2c/writing-clients - * spi: - * Documentation/spi/spi-summary - */ -static __init int iio_dummy_init(void) -{ - int i, ret; - - if (instances > 10) { - instances = 1; - return -EINVAL; - } - - /* Fake a bus */ - iio_dummy_devs = kcalloc(instances, sizeof(*iio_dummy_devs), - GFP_KERNEL); - /* Here we have no actual device so call probe */ - for (i = 0; i < instances; i++) { - ret = iio_dummy_probe(i); - if (ret < 0) - goto error_remove_devs; - } - return 0; - -error_remove_devs: - while (i--) - iio_dummy_remove(i); - - kfree(iio_dummy_devs); - return ret; -} -module_init(iio_dummy_init); - -/** - * iio_dummy_exit() - device driver removal - * - * Varies depending on bus type of the device. - * As there is no device here, call remove directly. - */ -static __exit void iio_dummy_exit(void) -{ - int i; - - for (i = 0; i < instances; i++) - iio_dummy_remove(i); - kfree(iio_dummy_devs); -} -module_exit(iio_dummy_exit); - -MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); -MODULE_DESCRIPTION("IIO dummy driver"); -MODULE_LICENSE("GPL v2"); |