diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/staging/rtl8712/rtl871x_cmd.h |
Initial import
Diffstat (limited to 'drivers/staging/rtl8712/rtl871x_cmd.h')
-rw-r--r-- | drivers/staging/rtl8712/rtl871x_cmd.h | 790 |
1 files changed, 790 insertions, 0 deletions
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h new file mode 100644 index 000000000..cb8225b94 --- /dev/null +++ b/drivers/staging/rtl8712/rtl871x_cmd.h @@ -0,0 +1,790 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * Modifications for inclusion into the Linux staging tree are + * Copyright(c) 2010 Larry Finger. All rights reserved. + * + * Contact information: + * WLAN FAE <wlanfae@realtek.com> + * Larry Finger <Larry.Finger@lwfinger.net> + * + ******************************************************************************/ +#ifndef __RTL871X_CMD_H_ +#define __RTL871X_CMD_H_ + +#include "wlan_bssdef.h" +#include "rtl871x_rf.h" +#define C2H_MEM_SZ (16*1024) + +#include "osdep_service.h" +#include "ieee80211.h" + +#define FREE_CMDOBJ_SZ 128 +#define MAX_CMDSZ 512 +#define MAX_RSPSZ 512 +#define MAX_EVTSZ 1024 +#define CMDBUFF_ALIGN_SZ 512 + +struct cmd_obj { + u16 cmdcode; + u8 res; + u8 *parmbuf; + u32 cmdsz; + u8 *rsp; + u32 rspsz; + struct list_head list; +}; + +struct cmd_priv { + struct semaphore cmd_queue_sema; + struct semaphore terminate_cmdthread_sema; + struct __queue cmd_queue; + u8 cmd_seq; + u8 *cmd_buf; /*shall be non-paged, and 4 bytes aligned*/ + u8 *cmd_allocated_buf; + u8 *rsp_buf; /*shall be non-paged, and 4 bytes aligned*/ + u8 *rsp_allocated_buf; + u32 cmd_issued_cnt; + u32 cmd_done_cnt; + u32 rsp_cnt; + struct _adapter *padapter; +}; + +struct evt_obj { + u16 evtcode; + u8 res; + u8 *parmbuf; + u32 evtsz; + struct list_head list; +}; + +struct evt_priv { + struct __queue evt_queue; + u8 event_seq; + u8 *evt_buf; /*shall be non-paged, and 4 bytes aligned*/ + u8 *evt_allocated_buf; + u32 evt_done_cnt; + struct tasklet_struct event_tasklet; +}; + +#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \ +do {\ + INIT_LIST_HEAD(&pcmd->list);\ + pcmd->cmdcode = code;\ + pcmd->parmbuf = (u8 *)(pparm);\ + pcmd->cmdsz = sizeof(*pparm);\ + pcmd->rsp = NULL;\ + pcmd->rspsz = 0;\ +} while (0) + +u32 r8712_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); +u32 r8712_enqueue_cmd_ex(struct cmd_priv *pcmdpriv, struct cmd_obj *obj); +struct cmd_obj *r8712_dequeue_cmd(struct __queue *queue); +void r8712_free_cmd_obj(struct cmd_obj *pcmd); +int r8712_cmd_thread(void *context); +u32 r8712_init_cmd_priv(struct cmd_priv *pcmdpriv); +void r8712_free_cmd_priv(struct cmd_priv *pcmdpriv); +u32 r8712_init_evt_priv(struct evt_priv *pevtpriv); +void r8712_free_evt_priv(struct evt_priv *pevtpriv); + +enum rtl871x_drvint_cid { + NONE_WK_CID, + WDG_WK_CID, + MAX_WK_CID +}; + +enum RFINTFS { + SWSI, + HWSI, + HWPI, +}; + +/* + * Caller Mode: Infra, Ad-HoC(C) + * Notes: To enter USB suspend mode + * Command Mode + */ +struct usb_suspend_parm { + u32 action; /* 1: sleep, 0:resume */ +}; + +/* + * Caller Mode: Infra, Ad-Hoc + * Notes: To join the specified bss + * Command Event Mode + */ +struct joinbss_parm { + struct ndis_wlan_bssid_ex network; +}; + +/* + * Caller Mode: Infra, Ad-HoC(C) + * Notes: To disconnect the current associated BSS + * Command Mode + */ +struct disconnect_parm { + u32 rsvd; +}; + +/* + * Caller Mode: AP, Ad-HoC(M) + * Notes: To create a BSS + * Command Mode + */ +struct createbss_parm { + struct ndis_wlan_bssid_ex network; +}; + +/* + * Caller Mode: AP, Ad-HoC, Infra + * Notes: To set the NIC mode of RTL8711 + * Command Mode + * The definition of mode: + * + * #define IW_MODE_AUTO 0 // Let the driver decides which AP to join + * #define IW_MODE_ADHOC 1 // Single cell network (Ad-Hoc Clients) + * #define IW_MODE_INFRA 2 // Multi cell network, roaming, .. + * #define IW_MODE_MASTER 3 // Synchronisation master or AP + * #define IW_MODE_REPEAT 4 // Wireless Repeater (forwarder) + * #define IW_MODE_SECOND 5 // Secondary master/repeater (backup) + * #define IW_MODE_MONITOR 6 // Passive monitor (listen only) +*/ +struct setopmode_parm { + u8 mode; + u8 rsvd[3]; +}; + +/* + * Caller Mode: AP, Ad-HoC, Infra + * Notes: To ask RTL8711 performing site-survey + * Command-Event Mode + */ +struct sitesurvey_parm { + sint passive_mode; /*active: 1, passive: 0 */ + sint bsslimit; /* 1 ~ 48 */ + sint ss_ssidlen; + u8 ss_ssid[IW_ESSID_MAX_SIZE + 1]; +}; + +/* + * Caller Mode: Any + * Notes: To set the auth type of RTL8711. open/shared/802.1x + * Command Mode + */ +struct setauth_parm { + u8 mode; /*0: legacy open, 1: legacy shared 2: 802.1x*/ + u8 _1x; /*0: PSK, 1: TLS*/ + u8 rsvd[2]; +}; + +/* + * Caller Mode: Infra + * a. algorithm: wep40, wep104, tkip & aes + * b. keytype: grp key/unicast key + * c. key contents + * + * when shared key ==> keyid is the camid + * when 802.1x ==> keyid [0:1] ==> grp key + * when 802.1x ==> keyid > 2 ==> unicast key + */ +struct setkey_parm { + u8 algorithm; /* encryption algorithm, could be none, wep40, + * TKIP, CCMP, wep104 */ + u8 keyid; + u8 grpkey; /* 1: this is the grpkey for 802.1x. + * 0: this is the unicast key for 802.1x */ + u8 key[16]; /* this could be 40 or 104 */ +}; + +/* + * When in AP or Ad-Hoc mode, this is used to + * allocate an sw/hw entry for a newly associated sta. + * Command + * when shared key ==> algorithm/keyid + */ +struct set_stakey_parm { + u8 addr[ETH_ALEN]; + u8 algorithm; + u8 key[16]; +}; + +struct set_stakey_rsp { + u8 addr[ETH_ALEN]; + u8 keyid; + u8 rsvd; +}; + +struct SetMacAddr_param { + u8 MacAddr[ETH_ALEN]; +}; + +/* +Caller Ad-Hoc/AP + +Command -Rsp(AID == CAMID) mode + +This is to force fw to add an sta_data entry per driver's request. + +FW will write an cam entry associated with it. + +*/ +struct set_assocsta_parm { + u8 addr[ETH_ALEN]; +}; + +struct set_assocsta_rsp { + u8 cam_id; + u8 rsvd[3]; +}; + +/* + Caller Ad-Hoc/AP + + Command mode + + This is to force fw to del an sta_data entry per driver's request + + FW will invalidate the cam entry associated with it. + +*/ +struct del_assocsta_parm { + u8 addr[ETH_ALEN]; +}; + +/* +Caller Mode: AP/Ad-HoC(M) + +Notes: To notify fw that given staid has changed its power state + +Command Mode + +*/ +struct setstapwrstate_parm { + u8 staid; + u8 status; + u8 hwaddr[6]; +}; + +/* +Caller Mode: Any + +Notes: To setup the basic rate of RTL8711 + +Command Mode + +*/ +struct setbasicrate_parm { + u8 basicrates[NumRates]; +}; + +/* +Caller Mode: Any + +Notes: To read the current basic rate + +Command-Rsp Mode + +*/ +struct getbasicrate_parm { + u32 rsvd; +}; + +struct getbasicrate_rsp { + u8 basicrates[NumRates]; +}; + +/* +Caller Mode: Any + +Notes: To setup the data rate of RTL8711 + +Command Mode + +*/ +struct setdatarate_parm { + u8 mac_id; + u8 datarates[NumRates]; +}; + +enum _RT_CHANNEL_DOMAIN { + RT_CHANNEL_DOMAIN_FCC = 0, + RT_CHANNEL_DOMAIN_IC = 1, + RT_CHANNEL_DOMAIN_ETSI = 2, + RT_CHANNEL_DOMAIN_SPAIN = 3, + RT_CHANNEL_DOMAIN_FRANCE = 4, + RT_CHANNEL_DOMAIN_MKK = 5, + RT_CHANNEL_DOMAIN_MKK1 = 6, + RT_CHANNEL_DOMAIN_ISRAEL = 7, + RT_CHANNEL_DOMAIN_TELEC = 8, + + /* Be compatible with old channel plan. No good! */ + RT_CHANNEL_DOMAIN_MIC = 9, + RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 10, + RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 11, + RT_CHANNEL_DOMAIN_TELEC_NETGEAR = 12, + + RT_CHANNEL_DOMAIN_NCC = 13, + RT_CHANNEL_DOMAIN_5G = 14, + RT_CHANNEL_DOMAIN_5G_40M = 15, + /*===== Add new channel plan above this line===============*/ + RT_CHANNEL_DOMAIN_MAX, +}; + + +struct SetChannelPlan_param { + enum _RT_CHANNEL_DOMAIN ChannelPlan; +}; + +/* +Caller Mode: Any + +Notes: To read the current data rate + +Command-Rsp Mode + +*/ +struct getdatarate_parm { + u32 rsvd; + +}; +struct getdatarate_rsp { + u8 datarates[NumRates]; +}; + + +/* +Caller Mode: Any +AP: AP can use the info for the contents of beacon frame +Infra: STA can use the info when sitesurveying +Ad-HoC(M): Like AP +Ad-HoC(C): Like STA + + +Notes: To set the phy capability of the NIC + +Command Mode + +*/ + +/* +Caller Mode: Any + +Notes: To set the channel/modem/band +This command will be used when channel/modem/band is changed. + +Command Mode + +*/ +/* +Caller Mode: Any + +Notes: To get the current setting of channel/modem/band + +Command-Rsp Mode + +*/ +struct getphy_rsp { + u8 rfchannel; + u8 modem; +}; + +struct readBB_parm { + u8 offset; +}; +struct readBB_rsp { + u8 value; +}; + +struct readTSSI_parm { + u8 offset; +}; +struct readTSSI_rsp { + u8 value; +}; + +struct writeBB_parm { + u8 offset; + u8 value; +}; + +struct writePTM_parm { + u8 type; +}; + +struct readRF_parm { + u8 offset; +}; +struct readRF_rsp { + u32 value; +}; + +struct writeRF_parm { + u32 offset; + u32 value; +}; + +struct setrfintfs_parm { + u8 rfintfs; +}; + +struct getrfintfs_parm { + u8 rfintfs; +}; + +/* + Notes: This command is used for H2C/C2H loopback testing + + mac[0] == 0 + ==> CMD mode, return H2C_SUCCESS. + The following condition must be ture under CMD mode + mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; + s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; + s2 == (b1 << 8 | b0); + + mac[0] == 1 + ==> CMD_RSP mode, return H2C_SUCCESS_RSP + + The rsp layout shall be: + rsp: parm: + mac[0] = mac[5]; + mac[1] = mac[4]; + mac[2] = mac[3]; + mac[3] = mac[2]; + mac[4] = mac[1]; + mac[5] = mac[0]; + s0 = s1; + s1 = swap16(s0); + w0 = swap32(w1); + b0 = b1 + s2 = s0 + s1 + b1 = b0 + w1 = w0 + + mac[0] == 2 + ==> CMD_EVENT mode, return H2C_SUCCESS + The event layout shall be: + event: parm: + mac[0] = mac[5]; + mac[1] = mac[4]; + mac[2] = event's sequence number, starting from 1 to parm's marc[3] + mac[3] = mac[2]; + mac[4] = mac[1]; + mac[5] = mac[0]; + s0 = swap16(s0) - event.mac[2]; + s1 = s1 + event.mac[2]; + w0 = swap32(w0); + b0 = b1 + s2 = s0 + event.mac[2] + b1 = b0 + w1 = swap32(w1) - event.mac[2]; + + parm->mac[3] is the total event counts that host requested. + + + event will be the same with the cmd's param. + +*/ + +/* CMD param Formart for DRV INTERNAL CMD HDL*/ +struct drvint_cmd_parm { + int i_cid; /*internal cmd id*/ + int sz; /* buf sz*/ + unsigned char *pbuf; +}; + +/*------------------- Below are used for RF/BB tunning ---------------------*/ + +struct setantenna_parm { + u8 tx_antset; + u8 rx_antset; + u8 tx_antenna; + u8 rx_antenna; +}; + +struct enrateadaptive_parm { + u32 en; +}; + +struct settxagctbl_parm { + u32 txagc[MAX_RATES_LENGTH]; +}; + +struct gettxagctbl_parm { + u32 rsvd; +}; +struct gettxagctbl_rsp { + u32 txagc[MAX_RATES_LENGTH]; +}; + +struct setagcctrl_parm { + u32 agcctrl; /* 0: pure hw, 1: fw */ +}; + +struct setssup_parm { + u32 ss_ForceUp[MAX_RATES_LENGTH]; +}; + +struct getssup_parm { + u32 rsvd; +}; +struct getssup_rsp { + u8 ss_ForceUp[MAX_RATES_LENGTH]; +}; + +struct setssdlevel_parm { + u8 ss_DLevel[MAX_RATES_LENGTH]; +}; + +struct getssdlevel_parm { + u32 rsvd; +}; +struct getssdlevel_rsp { + u8 ss_DLevel[MAX_RATES_LENGTH]; +}; + +struct setssulevel_parm { + u8 ss_ULevel[MAX_RATES_LENGTH]; +}; + +struct getssulevel_parm { + u32 rsvd; +}; +struct getssulevel_rsp { + u8 ss_ULevel[MAX_RATES_LENGTH]; +}; + +struct setcountjudge_parm { + u8 count_judge[MAX_RATES_LENGTH]; +}; + +struct getcountjudge_parm { + u32 rsvd; +}; + +struct getcountjudge_rsp { + u8 count_judge[MAX_RATES_LENGTH]; +}; + +struct setpwrmode_parm { + u8 mode; + u8 flag_low_traffic_en; + u8 flag_lpnav_en; + u8 flag_rf_low_snr_en; + u8 flag_dps_en; /* 1: dps, 0: 32k */ + u8 bcn_rx_en; + u8 bcn_pass_cnt; /* fw report one beacon information to + * driver when it receives bcn_pass_cnt + * beacons. */ + u8 bcn_to; /* beacon TO (ms). ¡§=0¡¨ no limit.*/ + u16 bcn_itv; + u8 app_itv; /* only for VOIP mode. */ + u8 awake_bcn_itv; + u8 smart_ps; + u8 bcn_pass_time; /* unit: 100ms */ +}; + +struct setatim_parm { + u8 op; /*0: add, 1:del*/ + u8 txid; /* id of dest station.*/ +}; + +struct setratable_parm { + u8 ss_ForceUp[NumRates]; + u8 ss_ULevel[NumRates]; + u8 ss_DLevel[NumRates]; + u8 count_judge[NumRates]; +}; + +struct getratable_parm { + uint rsvd; +}; +struct getratable_rsp { + u8 ss_ForceUp[NumRates]; + u8 ss_ULevel[NumRates]; + u8 ss_DLevel[NumRates]; + u8 count_judge[NumRates]; +}; + +/*to get TX,RX retry count*/ +struct gettxretrycnt_parm { + unsigned int rsvd; +}; + +struct gettxretrycnt_rsp { + unsigned long tx_retrycnt; +}; + +struct getrxretrycnt_parm { + unsigned int rsvd; +}; + +struct getrxretrycnt_rsp { + unsigned long rx_retrycnt; +}; + +/*to get BCNOK,BCNERR count*/ +struct getbcnokcnt_parm { + unsigned int rsvd; +}; + +struct getbcnokcnt_rsp { + unsigned long bcnokcnt; +}; + +struct getbcnerrcnt_parm { + unsigned int rsvd; +}; +struct getbcnerrcnt_rsp { + unsigned long bcnerrcnt; +}; + +/* to get current TX power level*/ +struct getcurtxpwrlevel_parm { + unsigned int rsvd; +}; + +struct getcurtxpwrlevel_rsp { + unsigned short tx_power; +}; + +/*dynamic on/off DIG*/ +struct setdig_parm { + unsigned char dig_on; /* 1:on , 0:off */ +}; + +/*dynamic on/off RA*/ +struct setra_parm { + unsigned char ra_on; /* 1:on , 0:off */ +}; + +struct setprobereqextraie_parm { + unsigned char e_id; + unsigned char ie_len; + unsigned char ie[0]; +}; + +struct setassocreqextraie_parm { + unsigned char e_id; + unsigned char ie_len; + unsigned char ie[0]; +}; + +struct setproberspextraie_parm { + unsigned char e_id; + unsigned char ie_len; + unsigned char ie[0]; +}; + +struct setassocrspextraie_parm { + unsigned char e_id; + unsigned char ie_len; + unsigned char ie[0]; +}; + +struct addBaReq_parm { + unsigned int tid; +}; + +/*H2C Handler index: 46 */ +struct SetChannel_parm { + u32 curr_ch; +}; + +/*H2C Handler index: 61 */ +struct DisconnectCtrlEx_param { + /* MAXTIME = (2 * FirstStageTO) + (TryPktCnt * TryPktInterval) */ + unsigned char EnableDrvCtrl; + unsigned char TryPktCnt; + unsigned char TryPktInterval; /* Unit: ms */ + unsigned char rsvd; + unsigned int FirstStageTO; /* Unit: ms */ +}; + +#define GEN_CMD_CODE(cmd) cmd ## _CMD_ + +/* + * Result: + * 0x00: success + * 0x01: success, and check Response. + * 0x02: cmd ignored due to duplicated sequence number + * 0x03: cmd dropped due to invalid cmd code + * 0x04: reserved. + */ + +#define H2C_RSP_OFFSET 512 +#define H2C_SUCCESS 0x00 +#define H2C_SUCCESS_RSP 0x01 +#define H2C_DUPLICATED 0x02 +#define H2C_DROPPED 0x03 +#define H2C_PARAMETERS_ERROR 0x04 +#define H2C_REJECTED 0x05 +#define H2C_CMD_OVERFLOW 0x06 +#define H2C_RESERVED 0x07 + +u8 r8712_setMacAddr_cmd(struct _adapter *padapter, u8 *mac_addr); +u8 r8712_setassocsta_cmd(struct _adapter *padapter, u8 *mac_addr); +u8 r8712_sitesurvey_cmd(struct _adapter *padapter, + struct ndis_802_11_ssid *pssid); +u8 r8712_createbss_cmd(struct _adapter *padapter); +u8 r8712_setstakey_cmd(struct _adapter *padapter, u8 *psta, u8 unicast_key); +u8 r8712_joinbss_cmd(struct _adapter *padapter, + struct wlan_network *pnetwork); +u8 r8712_disassoc_cmd(struct _adapter *padapter); +u8 r8712_setopmode_cmd(struct _adapter *padapter, + enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype); +u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset); +u8 r8712_set_chplan_cmd(struct _adapter *padapter, int chplan); +u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset); +u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 *pval); +u8 r8712_setrfintfs_cmd(struct _adapter *padapter, u8 mode); +u8 r8712_setrfreg_cmd(struct _adapter *padapter, u8 offset, u32 val); +u8 r8712_setrttbl_cmd(struct _adapter *padapter, + struct setratable_parm *prate_table); +u8 r8712_gettssi_cmd(struct _adapter *padapter, u8 offset, u8 *pval); +u8 r8712_setptm_cmd(struct _adapter *padapter, u8 type); +u8 r8712_setfwdig_cmd(struct _adapter *padapter, u8 type); +u8 r8712_setfwra_cmd(struct _adapter *padapter, u8 type); +u8 r8712_addbareq_cmd(struct _adapter *padapter, u8 tid); +u8 r8712_wdg_wk_cmd(struct _adapter *padapter); +void r8712_survey_cmd_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_disassoc_cmd_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_joinbss_cmd_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_createbss_cmd_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_getbbrfreg_cmdrsp_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_readtssi_cmdrsp_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_setstaKey_cmdrsp_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +void r8712_setassocsta_cmdrsp_callback(struct _adapter *padapter, + struct cmd_obj *pcmd); +u8 r8712_disconnectCtrlEx_cmd(struct _adapter *adapter, u32 enableDrvCtrl, + u32 tryPktCnt, u32 tryPktInterval, u32 firstStageTO); + +struct _cmd_callback { + u32 cmd_code; + void (*callback)(struct _adapter *padapter, struct cmd_obj *cmd); +}; + +#include "rtl8712_cmd.h" + +#endif /* _CMD_H_ */ + |