Linux-libre 4.2-gnu

3 files changed, 187 insertions, 6 deletions

diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
index c8e35c1a4..e0da3865e 100644
--- a/drivers/thermal/samsung/Kconfig
+++ b/drivers/thermal/samsung/Kconfig
@@ -1,6 +1,6 @@
 config EXYNOS_THERMAL
 	tristate "Exynos thermal management unit driver"
-	depends on OF
+	depends on THERMAL_OF
 	help
 	  If you say yes here you get support for the TMU (Thermal Management
 	  Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 67098a8a7..c96ff10b8 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -97,6 +97,32 @@
 #define EXYNOS4412_MUX_ADDR_VALUE          6
 #define EXYNOS4412_MUX_ADDR_SHIFT          20
 
+/* Exynos5433 specific registers */
+#define EXYNOS5433_TMU_REG_CONTROL1		0x024
+#define EXYNOS5433_TMU_SAMPLING_INTERVAL	0x02c
+#define EXYNOS5433_TMU_COUNTER_VALUE0		0x030
+#define EXYNOS5433_TMU_COUNTER_VALUE1		0x034
+#define EXYNOS5433_TMU_REG_CURRENT_TEMP1	0x044
+#define EXYNOS5433_THD_TEMP_RISE3_0		0x050
+#define EXYNOS5433_THD_TEMP_RISE7_4		0x054
+#define EXYNOS5433_THD_TEMP_FALL3_0		0x060
+#define EXYNOS5433_THD_TEMP_FALL7_4		0x064
+#define EXYNOS5433_TMU_REG_INTEN		0x0c0
+#define EXYNOS5433_TMU_REG_INTPEND		0x0c8
+#define EXYNOS5433_TMU_EMUL_CON			0x110
+#define EXYNOS5433_TMU_PD_DET_EN		0x130
+
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT	16
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT	23
+#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK	\
+			(0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
+#define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK	BIT(23)
+
+#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING	0
+#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING	1
+
+#define EXYNOS5433_PD_DET_EN			1
+
 /*exynos5440 specific registers*/
 #define EXYNOS5440_TMU_S0_7_TRIM		0x000
 #define EXYNOS5440_TMU_S0_7_CTRL		0x020
@@ -484,6 +510,101 @@ out:
 	return ret;
 }
 
+static int exynos5433_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	struct thermal_zone_device *tz = data->tzd;
+	unsigned int status, trim_info;
+	unsigned int rising_threshold = 0, falling_threshold = 0;
+	unsigned long temp, temp_hist;
+	int ret = 0, threshold_code, i, sensor_id, cal_type;
+
+	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+	if (!status) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+	sanitize_temp_error(data, trim_info);
+
+	/* Read the temperature sensor id */
+	sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
+				>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
+	dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
+
+	/* Read the calibration mode */
+	writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
+	cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
+				>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
+
+	switch (cal_type) {
+	case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
+		pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
+		break;
+	case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
+		pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
+		break;
+	default:
+		pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
+		break;
+	};
+
+	dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
+			cal_type ?  2 : 1);
+
+	/* Write temperature code for rising and falling threshold */
+	for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
+		int rising_reg_offset, falling_reg_offset;
+		int j = 0;
+
+		switch (i) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+			rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
+			falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
+			j = i;
+			break;
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
+			falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
+			j = i - 4;
+			break;
+		default:
+			continue;
+		}
+
+		/* Write temperature code for rising threshold */
+		tz->ops->get_trip_temp(tz, i, &temp);
+		temp /= MCELSIUS;
+		threshold_code = temp_to_code(data, temp);
+
+		rising_threshold = readl(data->base + rising_reg_offset);
+		rising_threshold |= (threshold_code << j * 8);
+		writel(rising_threshold, data->base + rising_reg_offset);
+
+		/* Write temperature code for falling threshold */
+		tz->ops->get_trip_hyst(tz, i, &temp_hist);
+		temp_hist = temp - (temp_hist / MCELSIUS);
+		threshold_code = temp_to_code(data, temp_hist);
+
+		falling_threshold = readl(data->base + falling_reg_offset);
+		falling_threshold &= ~(0xff << j * 8);
+		falling_threshold |= (threshold_code << j * 8);
+		writel(falling_threshold, data->base + falling_reg_offset);
+	}
+
+	data->tmu_clear_irqs(data);
+out:
+	return ret;
+}
+
 static int exynos5440_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -643,6 +764,48 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
 	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 }
 
+static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct thermal_zone_device *tz = data->tzd;
+	unsigned int con, interrupt_en, pd_det_en;
+
+	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
+
+	if (on) {
+		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		interrupt_en =
+			(of_thermal_is_trip_valid(tz, 7)
+			<< EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 6)
+			<< EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 5)
+			<< EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 4)
+			<< EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 3)
+			<< EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 2)
+			<< EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 1)
+			<< EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
+			(of_thermal_is_trip_valid(tz, 0)
+			<< EXYNOS7_TMU_INTEN_RISE0_SHIFT);
+
+		interrupt_en |=
+			interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+	} else {
+		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+		interrupt_en = 0; /* Disable all interrupts */
+	}
+
+	pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
+
+	writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
+	writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
 static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
@@ -770,6 +933,8 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 
 	if (data->soc == SOC_ARCH_EXYNOS5260)
 		emul_con = EXYNOS5260_EMUL_CON;
+	if (data->soc == SOC_ARCH_EXYNOS5433)
+		emul_con = EXYNOS5433_TMU_EMUL_CON;
 	else if (data->soc == SOC_ARCH_EXYNOS7)
 		emul_con = EXYNOS7_TMU_REG_EMUL_CON;
 	else
@@ -882,6 +1047,9 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
 	} else if (data->soc == SOC_ARCH_EXYNOS7) {
 		tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
 		tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
+	} else if (data->soc == SOC_ARCH_EXYNOS5433) {
+		tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
+		tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
 	} else {
 		tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
 		tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
@@ -926,6 +1094,7 @@ static const struct of_device_id exynos_tmu_match[] = {
 	{ .compatible = "samsung,exynos5260-tmu", },
 	{ .compatible = "samsung,exynos5420-tmu", },
 	{ .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
+	{ .compatible = "samsung,exynos5433-tmu", },
 	{ .compatible = "samsung,exynos5440-tmu", },
 	{ .compatible = "samsung,exynos7-tmu", },
 	{ /* sentinel */ },
@@ -949,6 +1118,8 @@ static int exynos_of_get_soc_type(struct device_node *np)
 	else if (of_device_is_compatible(np,
 					 "samsung,exynos5420-tmu-ext-triminfo"))
 		return SOC_ARCH_EXYNOS5420_TRIMINFO;
+	else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
+		return SOC_ARCH_EXYNOS5433;
 	else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
 		return SOC_ARCH_EXYNOS5440;
 	else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
@@ -1069,6 +1240,13 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
 		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
 		break;
+	case SOC_ARCH_EXYNOS5433:
+		data->tmu_initialize = exynos5433_tmu_initialize;
+		data->tmu_control = exynos5433_tmu_control;
+		data->tmu_read = exynos4412_tmu_read;
+		data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+		data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+		break;
 	case SOC_ARCH_EXYNOS5440:
 		data->tmu_initialize = exynos5440_tmu_initialize;
 		data->tmu_control = exynos5440_tmu_control;
@@ -1118,7 +1296,6 @@ static struct thermal_zone_of_device_ops exynos_sensor_ops = {
 
 static int exynos_tmu_probe(struct platform_device *pdev)
 {
-	struct exynos_tmu_platform_data *pdata;
 	struct exynos_tmu_data *data;
 	int ret;
 
@@ -1140,8 +1317,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_sensor;
 
-	pdata = data->pdata;
-
 	INIT_WORK(&data->irq_work, exynos_tmu_work);
 
 	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
@@ -1172,7 +1347,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		goto err_clk_sec;
 	}
 
-	if (data->soc == SOC_ARCH_EXYNOS7) {
+	switch (data->soc) {
+	case SOC_ARCH_EXYNOS5433:
+	case SOC_ARCH_EXYNOS7:
 		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
 		if (IS_ERR(data->sclk)) {
 			dev_err(&pdev->dev, "Failed to get sclk\n");
@@ -1184,7 +1361,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 				goto err_clk;
 			}
 		}
-	}
+		break;
+	default:
+		break;
+	};
 
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 4d71ec6c9..440c7140b 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -33,6 +33,7 @@ enum soc_type {
 	SOC_ARCH_EXYNOS5260,
 	SOC_ARCH_EXYNOS5420,
 	SOC_ARCH_EXYNOS5420_TRIMINFO,
+	SOC_ARCH_EXYNOS5433,
 	SOC_ARCH_EXYNOS5440,
 	SOC_ARCH_EXYNOS7,
 };