Initial import

1 files changed, 1632 insertions, 0 deletions

diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
new file mode 100644
index 000000000..bc14dc874
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -0,0 +1,1632 @@
+/*
+ * TI Bandgap temperature sensor driver
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: J Keerthy <j-keerthy@ti.com>
+ * Author: Moiz Sonasath <m-sonasath@ti.com>
+ * Couple of fixes, DT and MFD adaptation:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/reboot.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+
+#include "ti-bandgap.h"
+
+/***   Helper functions to access registers and their bitfields   ***/
+
+/**
+ * ti_bandgap_readl() - simple read helper function
+ * @bgp: pointer to ti_bandgap structure
+ * @reg: desired register (offset) to be read
+ *
+ * Helper function to read bandgap registers. It uses the io remapped area.
+ * Return: the register value.
+ */
+static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
+{
+	return readl(bgp->base + reg);
+}
+
+/**
+ * ti_bandgap_writel() - simple write helper function
+ * @bgp: pointer to ti_bandgap structure
+ * @val: desired register value to be written
+ * @reg: desired register (offset) to be written
+ *
+ * Helper function to write bandgap registers. It uses the io remapped area.
+ */
+static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
+{
+	writel(val, bgp->base + reg);
+}
+
+/**
+ * DOC: macro to update bits.
+ *
+ * RMW_BITS() - used to read, modify and update bandgap bitfields.
+ *            The value passed will be shifted.
+ */
+#define RMW_BITS(bgp, id, reg, mask, val)			\
+do {								\
+	struct temp_sensor_registers *t;			\
+	u32 r;							\
+								\
+	t = bgp->conf->sensors[(id)].registers;		\
+	r = ti_bandgap_readl(bgp, t->reg);			\
+	r &= ~t->mask;						\
+	r |= (val) << __ffs(t->mask);				\
+	ti_bandgap_writel(bgp, r, t->reg);			\
+} while (0)
+
+/***   Basic helper functions   ***/
+
+/**
+ * ti_bandgap_power() - controls the power state of a bandgap device
+ * @bgp: pointer to ti_bandgap structure
+ * @on: desired power state (1 - on, 0 - off)
+ *
+ * Used to power on/off a bandgap device instance. Only used on those
+ * that features tempsoff bit.
+ *
+ * Return: 0 on success, -ENOTSUPP if tempsoff is not supported.
+ */
+static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
+{
+	int i, ret = 0;
+
+	if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	for (i = 0; i < bgp->conf->sensor_count; i++)
+		/* active on 0 */
+		RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
+
+exit:
+	return ret;
+}
+
+/**
+ * ti_errata814_bandgap_read_temp() - helper function to read dra7 sensor temperature
+ * @bgp: pointer to ti_bandgap structure
+ * @reg: desired register (offset) to be read
+ *
+ * Function to read dra7 bandgap sensor temperature. This is done separately
+ * so as to workaround the errata "Bandgap Temperature read Dtemp can be
+ * corrupted" - Errata ID: i814".
+ * Read accesses to registers listed below can be corrupted due to incorrect
+ * resynchronization between clock domains.
+ * Read access to registers below can be corrupted :
+ * CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4)
+ * CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n
+ *
+ * Return: the register value.
+ */
+static u32 ti_errata814_bandgap_read_temp(struct ti_bandgap *bgp,  u32 reg)
+{
+	u32 val1, val2;
+
+	val1 = ti_bandgap_readl(bgp, reg);
+	val2 = ti_bandgap_readl(bgp, reg);
+
+	/* If both times we read the same value then that is right */
+	if (val1 == val2)
+		return val1;
+
+	/* if val1 and val2 are different read it third time */
+	return ti_bandgap_readl(bgp, reg);
+}
+
+/**
+ * ti_bandgap_read_temp() - helper function to read sensor temperature
+ * @bgp: pointer to ti_bandgap structure
+ * @id: bandgap sensor id
+ *
+ * Function to concentrate the steps to read sensor temperature register.
+ * This function is desired because, depending on bandgap device version,
+ * it might be needed to freeze the bandgap state machine, before fetching
+ * the register value.
+ *
+ * Return: temperature in ADC values.
+ */
+static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp, reg;
+
+	tsr = bgp->conf->sensors[id].registers;
+	reg = tsr->temp_sensor_ctrl;
+
+	if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+		RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+		/*
+		 * In case we cannot read from cur_dtemp / dtemp_0,
+		 * then we read from the last valid temp read
+		 */
+		reg = tsr->ctrl_dtemp_1;
+	}
+
+	/* read temperature */
+	if (TI_BANDGAP_HAS(bgp, ERRATA_814))
+		temp = ti_errata814_bandgap_read_temp(bgp, reg);
+	else
+		temp = ti_bandgap_readl(bgp, reg);
+
+	temp &= tsr->bgap_dtemp_mask;
+
+	if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
+		RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+
+	return temp;
+}
+
+/***   IRQ handlers   ***/
+
+/**
+ * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
+ * @irq: IRQ number
+ * @data: private data (struct ti_bandgap *)
+ *
+ * This is the Talert handler. Use it only if bandgap device features
+ * HAS(TALERT). This handler goes over all sensors and checks their
+ * conditions and acts accordingly. In case there are events pending,
+ * it will reset the event mask to wait for the opposite event (next event).
+ * Every time there is a new event, it will be reported to thermal layer.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
+{
+	struct ti_bandgap *bgp = data;
+	struct temp_sensor_registers *tsr;
+	u32 t_hot = 0, t_cold = 0, ctrl;
+	int i;
+
+	spin_lock(&bgp->lock);
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		tsr = bgp->conf->sensors[i].registers;
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);
+
+		/* Read the status of t_hot */
+		t_hot = ctrl & tsr->status_hot_mask;
+
+		/* Read the status of t_cold */
+		t_cold = ctrl & tsr->status_cold_mask;
+
+		if (!t_cold && !t_hot)
+			continue;
+
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+		/*
+		 * One TALERT interrupt: Two sources
+		 * If the interrupt is due to t_hot then mask t_hot and
+		 * and unmask t_cold else mask t_cold and unmask t_hot
+		 */
+		if (t_hot) {
+			ctrl &= ~tsr->mask_hot_mask;
+			ctrl |= tsr->mask_cold_mask;
+		} else if (t_cold) {
+			ctrl &= ~tsr->mask_cold_mask;
+			ctrl |= tsr->mask_hot_mask;
+		}
+
+		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+
+		dev_dbg(bgp->dev,
+			"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
+			__func__, bgp->conf->sensors[i].domain,
+			t_hot, t_cold);
+
+		/* report temperature to whom may concern */
+		if (bgp->conf->report_temperature)
+			bgp->conf->report_temperature(bgp, i);
+	}
+	spin_unlock(&bgp->lock);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
+ * @irq: IRQ number
+ * @data: private data (unused)
+ *
+ * This is the Tshut handler. Use it only if bandgap device features
+ * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
+ * the system.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
+{
+	pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
+		 __func__);
+
+	orderly_poweroff(true);
+
+	return IRQ_HANDLED;
+}
+
+/***   Helper functions which manipulate conversion ADC <-> mi Celsius   ***/
+
+/**
+ * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
+ * @bgp: struct ti_bandgap pointer
+ * @adc_val: value in ADC representation
+ * @t: address where to write the resulting temperature in mCelsius
+ *
+ * Simple conversion from ADC representation to mCelsius. In case the ADC value
+ * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
+ * The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if conversion was successful, else -ERANGE in case the @adc_val
+ * argument is out of the ADC conv table range.
+ */
+static
+int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
+{
+	const struct ti_bandgap_data *conf = bgp->conf;
+	int ret = 0;
+
+	/* look up for temperature in the table and return the temperature */
+	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
+		ret = -ERANGE;
+		goto exit;
+	}
+
+	*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
+
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
+ * @bgp: struct ti_bandgap pointer
+ * @temp: value in mCelsius
+ * @adc: address where to write the resulting temperature in ADC representation
+ *
+ * Simple conversion from mCelsius to ADC values. In case the temp value
+ * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
+ * The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if conversion was successful, else -ERANGE in case the @temp
+ * argument is out of the ADC conv table range.
+ */
+static
+int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
+{
+	const struct ti_bandgap_data *conf = bgp->conf;
+	const int *conv_table = bgp->conf->conv_table;
+	int high, low, mid, ret = 0;
+
+	low = 0;
+	high = conf->adc_end_val - conf->adc_start_val;
+	mid = (high + low) / 2;
+
+	if (temp < conv_table[low] || temp > conv_table[high]) {
+		ret = -ERANGE;
+		goto exit;
+	}
+
+	while (low < high) {
+		if (temp < conv_table[mid])
+			high = mid - 1;
+		else
+			low = mid + 1;
+		mid = (low + high) / 2;
+	}
+
+	*adc = conf->adc_start_val + low;
+
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
+ * @bgp: struct ti_bandgap pointer
+ * @adc_val: temperature value in ADC representation
+ * @hyst_val: hysteresis value in mCelsius
+ * @sum: address where to write the resulting temperature (in ADC scale)
+ *
+ * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
+ *
+ * Return: 0 on success, -ERANGE otherwise.
+ */
+static
+int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
+			u32 *sum)
+{
+	int temp, ret;
+
+	/*
+	 * Need to add in the mcelsius domain, so we have a temperature
+	 * the conv_table range
+	 */
+	ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
+	if (ret < 0)
+		goto exit;
+
+	temp += hyst_val;
+
+	ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
+
+exit:
+	return ret;
+}
+
+/***   Helper functions handling device Alert/Shutdown signals   ***/
+
+/**
+ * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ * @t_hot: hot temperature value to trigger alert signal
+ * @t_cold: cold temperature value to trigger alert signal
+ *
+ * Checks the requested t_hot and t_cold values and configures the IRQ event
+ * masks accordingly. Call this function only if bandgap features HAS(TALERT).
+ */
+static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
+					 u32 t_hot, u32 t_cold)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp, reg_val;
+
+	/* Read the current on die temperature */
+	temp = ti_bandgap_read_temp(bgp, id);
+
+	tsr = bgp->conf->sensors[id].registers;
+	reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+
+	if (temp < t_hot)
+		reg_val |= tsr->mask_hot_mask;
+	else
+		reg_val &= ~tsr->mask_hot_mask;
+
+	if (t_cold < temp)
+		reg_val |= tsr->mask_cold_mask;
+	else
+		reg_val &= ~tsr->mask_cold_mask;
+	ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
+}
+
+/**
+ * ti_bandgap_update_alert_threshold() - sequence to update thresholds
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ * @val: value (ADC) of a new threshold
+ * @hot: desired threshold to be updated. true if threshold hot, false if
+ *       threshold cold
+ *
+ * It will program the required thresholds (hot and cold) for TALERT signal.
+ * This function can be used to update t_hot or t_cold, depending on @hot value.
+ * It checks the resulting t_hot and t_cold values, based on the new passed @val
+ * and configures the thresholds so that t_hot is always greater than t_cold.
+ * Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error
+ */
+static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
+					     int val, bool hot)
+{
+	struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
+	struct temp_sensor_registers *tsr;
+	u32 thresh_val, reg_val, t_hot, t_cold, ctrl;
+	int err = 0;
+
+	tsr = bgp->conf->sensors[id].registers;
+
+	/* obtain the current value */
+	thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
+	t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
+		__ffs(tsr->threshold_tcold_mask);
+	t_hot = (thresh_val & tsr->threshold_thot_mask) >>
+		__ffs(tsr->threshold_thot_mask);
+	if (hot)
+		t_hot = val;
+	else
+		t_cold = val;
+
+	if (t_cold > t_hot) {
+		if (hot)
+			err = ti_bandgap_add_hyst(bgp, t_hot,
+						  -ts_data->hyst_val,
+						  &t_cold);
+		else
+			err = ti_bandgap_add_hyst(bgp, t_cold,
+						  ts_data->hyst_val,
+						  &t_hot);
+	}
+
+	/* write the new threshold values */
+	reg_val = thresh_val &
+		  ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
+	reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
+		   (t_cold << __ffs(tsr->threshold_tcold_mask));
+
+	/**
+	 * Errata i813:
+	 * Spurious Thermal Alert: Talert can happen randomly while the device
+	 * remains under the temperature limit defined for this event to trig.
+	 * This spurious event is caused by a incorrect re-synchronization
+	 * between clock domains. The comparison between configured threshold
+	 * and current temperature value can happen while the value is
+	 * transitioning (metastable), thus causing inappropriate event
+	 * generation. No spurious event occurs as long as the threshold value
+	 * stays unchanged. Spurious event can be generated while a thermal
+	 * alert threshold is modified in
+	 * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n.
+	 */
+
+	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
+		/* Mask t_hot and t_cold events at the IP Level */
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+
+		if (hot)
+			ctrl &= ~tsr->mask_hot_mask;
+		else
+			ctrl &= ~tsr->mask_cold_mask;
+
+		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+	}
+
+	/* Write the threshold value */
+	ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
+
+	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
+		/* Unmask t_hot and t_cold events at the IP Level */
+		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+		if (hot)
+			ctrl |= tsr->mask_hot_mask;
+		else
+			ctrl |= tsr->mask_cold_mask;
+
+		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+	}
+
+	if (err) {
+		dev_err(bgp->dev, "failed to reprogram thot threshold\n");
+		err = -EIO;
+		goto exit;
+	}
+
+	ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
+exit:
+	return err;
+}
+
+/**
+ * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ *
+ * Checks if the bandgap pointer is valid and if the sensor id is also
+ * applicable.
+ *
+ * Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if
+ * @id cannot index @bgp sensors.
+ */
+static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
+{
+	int ret = 0;
+
+	if (!bgp || IS_ERR(bgp)) {
+		pr_err("%s: invalid bandgap pointer\n", __func__);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	if ((id < 0) || (id >= bgp->conf->sensor_count)) {
+		dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
+			__func__, id);
+		ret = -ERANGE;
+	}
+
+exit:
+	return ret;
+}
+
+/**
+ * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ * @val: value (mCelsius) of a new threshold
+ * @hot: desired threshold to be updated. true if threshold hot, false if
+ *       threshold cold
+ *
+ * It will update the required thresholds (hot and cold) for TALERT signal.
+ * This function can be used to update t_hot or t_cold, depending on @hot value.
+ * Validates the mCelsius range and update the requested threshold.
+ * Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error value.
+ */
+static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
+				       bool hot)
+{
+	struct temp_sensor_data *ts_data;
+	struct temp_sensor_registers *tsr;
+	u32 adc_val;
+	int ret;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	ts_data = bgp->conf->sensors[id].ts_data;
+	tsr = bgp->conf->sensors[id].registers;
+	if (hot) {
+		if (val < ts_data->min_temp + ts_data->hyst_val)
+			ret = -EINVAL;
+	} else {
+		if (val > ts_data->max_temp + ts_data->hyst_val)
+			ret = -EINVAL;
+	}
+
+	if (ret)
+		goto exit;
+
+	ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
+	if (ret < 0)
+		goto exit;
+
+	spin_lock(&bgp->lock);
+	ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+	spin_unlock(&bgp->lock);
+
+exit:
+	return ret;
+}
+
+/**
+ * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
+ * @val: value (mCelsius) of a threshold
+ * @hot: desired threshold to be read. true if threshold hot, false if
+ *       threshold cold
+ *
+ * It will fetch the required thresholds (hot and cold) for TALERT signal.
+ * This function can be used to read t_hot or t_cold, depending on @hot value.
+ * Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the
+ * corresponding error value if some operation fails.
+ */
+static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
+				      int *val, bool hot)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp, mask;
+	int ret = 0;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	tsr = bgp->conf->sensors[id].registers;
+	if (hot)
+		mask = tsr->threshold_thot_mask;
+	else
+		mask = tsr->threshold_tcold_mask;
+
+	temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
+	temp = (temp & mask) >> __ffs(mask);
+	ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+	if (ret) {
+		dev_err(bgp->dev, "failed to read thot\n");
+		ret = -EIO;
+		goto exit;
+	}
+
+	*val = temp;
+
+exit:
+	return ret;
+}
+
+/***   Exposed APIs   ***/
+
+/**
+ * ti_bandgap_read_thot() - reads sensor current thot
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @thot: resulting current thot value
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
+{
+	return _ti_bandgap_read_threshold(bgp, id, thot, true);
+}
+
+/**
+ * ti_bandgap_write_thot() - sets sensor current thot
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired thot value
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
+{
+	return _ti_bandgap_write_threshold(bgp, id, val, true);
+}
+
+/**
+ * ti_bandgap_read_tcold() - reads sensor current tcold
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @tcold: resulting current tcold value
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
+{
+	return _ti_bandgap_read_threshold(bgp, id, tcold, false);
+}
+
+/**
+ * ti_bandgap_write_tcold() - sets the sensor tcold
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired tcold value
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
+{
+	return _ti_bandgap_write_threshold(bgp, id, val, false);
+}
+
+/**
+ * ti_bandgap_read_counter() - read the sensor counter
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ */
+static void ti_bandgap_read_counter(struct ti_bandgap *bgp, int id,
+				    int *interval)
+{
+	struct temp_sensor_registers *tsr;
+	int time;
+
+	tsr = bgp->conf->sensors[id].registers;
+	time = ti_bandgap_readl(bgp, tsr->bgap_counter);
+	time = (time & tsr->counter_mask) >>
+					__ffs(tsr->counter_mask);
+	time = time * 1000 / bgp->clk_rate;
+	*interval = time;
+}
+
+/**
+ * ti_bandgap_read_counter_delay() - read the sensor counter delay
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ */
+static void ti_bandgap_read_counter_delay(struct ti_bandgap *bgp, int id,
+					  int *interval)
+{
+	struct temp_sensor_registers *tsr;
+	int reg_val;
+
+	tsr = bgp->conf->sensors[id].registers;
+
+	reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+	reg_val = (reg_val & tsr->mask_counter_delay_mask) >>
+				__ffs(tsr->mask_counter_delay_mask);
+	switch (reg_val) {
+	case 0:
+		*interval = 0;
+		break;
+	case 1:
+		*interval = 1;
+		break;
+	case 2:
+		*interval = 10;
+		break;
+	case 3:
+		*interval = 100;
+		break;
+	case 4:
+		*interval = 250;
+		break;
+	case 5:
+		*interval = 500;
+		break;
+	default:
+		dev_warn(bgp->dev, "Wrong counter delay value read from register %X",
+			 reg_val);
+	}
+}
+
+/**
+ * ti_bandgap_read_update_interval() - read the sensor update interval
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+				    int *interval)
+{
+	int ret = 0;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
+	    !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	if (TI_BANDGAP_HAS(bgp, COUNTER)) {
+		ti_bandgap_read_counter(bgp, id, interval);
+		goto exit;
+	}
+
+	ti_bandgap_read_counter_delay(bgp, id, interval);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_write_counter_delay() - set the counter_delay
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+static int ti_bandgap_write_counter_delay(struct ti_bandgap *bgp, int id,
+					  u32 interval)
+{
+	int rval;
+
+	switch (interval) {
+	case 0: /* Immediate conversion */
+		rval = 0x0;
+		break;
+	case 1: /* Conversion after ever 1ms */
+		rval = 0x1;
+		break;
+	case 10: /* Conversion after ever 10ms */
+		rval = 0x2;
+		break;
+	case 100: /* Conversion after ever 100ms */
+		rval = 0x3;
+		break;
+	case 250: /* Conversion after ever 250ms */
+		rval = 0x4;
+		break;
+	case 500: /* Conversion after ever 500ms */
+		rval = 0x5;
+		break;
+	default:
+		dev_warn(bgp->dev, "Delay %d ms is not supported\n", interval);
+		return -EINVAL;
+	}
+
+	spin_lock(&bgp->lock);
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_counter_delay_mask, rval);
+	spin_unlock(&bgp->lock);
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_write_counter() - set the bandgap sensor counter
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ */
+static void ti_bandgap_write_counter(struct ti_bandgap *bgp, int id,
+				     u32 interval)
+{
+	interval = interval * bgp->clk_rate / 1000;
+	spin_lock(&bgp->lock);
+	RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
+	spin_unlock(&bgp->lock);
+}
+
+/**
+ * ti_bandgap_write_update_interval() - set the update interval
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
+				     int id, u32 interval)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, COUNTER) &&
+	    !TI_BANDGAP_HAS(bgp, COUNTER_DELAY)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	if (TI_BANDGAP_HAS(bgp, COUNTER)) {
+		ti_bandgap_write_counter(bgp, id, interval);
+		goto exit;
+	}
+
+	ret = ti_bandgap_write_counter_delay(bgp, id, interval);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_read_temperature() - report current temperature
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @temperature: resulting temperature
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+				int *temperature)
+{
+	u32 temp;
+	int ret;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ret;
+
+	spin_lock(&bgp->lock);
+	temp = ti_bandgap_read_temp(bgp, id);
+	spin_unlock(&bgp->lock);
+
+	ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+	if (ret)
+		return -EIO;
+
+	*temperature = temp;
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_set_sensor_data() - helper function to store thermal
+ * framework related data.
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @data: thermal framework related data to be stored
+ *
+ * Return: 0 on success or the proper error code
+ */
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ret;
+
+	bgp->regval[id].data = data;
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_get_sensor_data() - helper function to get thermal
+ * framework related data.
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ *
+ * Return: data stored by set function with sensor id on success or NULL
+ */
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
+{
+	int ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return bgp->regval[id].data;
+}
+
+/***   Helper functions used during device initialization   ***/
+
+/**
+ * ti_bandgap_force_single_read() - executes 1 single ADC conversion
+ * @bgp: pointer to struct ti_bandgap
+ * @id: sensor id which it is desired to read 1 temperature
+ *
+ * Used to initialize the conversion state machine and set it to a valid
+ * state. Called during device initialization and context restore events.
+ *
+ * Return: 0
+ */
+static int
+ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
+{
+	u32 temp = 0, counter = 1000;
+
+	/* Select single conversion mode */
+	if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+		RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+
+	/* Start of Conversion = 1 */
+	RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
+	/* Wait until DTEMP is updated */
+	temp = ti_bandgap_read_temp(bgp, id);
+
+	while ((temp == 0) && --counter)
+		temp = ti_bandgap_read_temp(bgp, id);
+	/* REVISIT: Check correct condition for end of conversion */
+
+	/* Start of Conversion = 0 */
+	RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * @bgp: pointer to struct ti_bandgap
+ *
+ * Call this function only if HAS(MODE_CONFIG) is set. As this driver may
+ * be used for junction temperature monitoring, it is desirable that the
+ * sensors are operational all the time, so that alerts are generated
+ * properly.
+ *
+ * Return: 0
+ */
+static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		/* Perform a single read just before enabling continuous */
+		ti_bandgap_force_single_read(bgp, i);
+		RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
+	}
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_get_trend() - To fetch the temperature trend of a sensor
+ * @bgp: pointer to struct ti_bandgap
+ * @id: id of the individual sensor
+ * @trend: Pointer to trend.
+ *
+ * This function needs to be called to fetch the temperature trend of a
+ * Particular sensor. The function computes the difference in temperature
+ * w.r.t time. For the bandgaps with built in history buffer the temperatures
+ * are read from the buffer and for those without the Buffer -ENOTSUPP is
+ * returned.
+ *
+ * Return: 0 if no error, else return corresponding error. If no
+ *		error then the trend value is passed on to trend parameter
+ */
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend)
+{
+	struct temp_sensor_registers *tsr;
+	u32 temp1, temp2, reg1, reg2;
+	int t1, t2, interval, ret = 0;
+
+	ret = ti_bandgap_validate(bgp, id);
+	if (ret)
+		goto exit;
+
+	if (!TI_BANDGAP_HAS(bgp, HISTORY_BUFFER) ||
+	    !TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+		ret = -ENOTSUPP;
+		goto exit;
+	}
+
+	spin_lock(&bgp->lock);
+
+	tsr = bgp->conf->sensors[id].registers;
+
+	/* Freeze and read the last 2 valid readings */
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+	reg1 = tsr->ctrl_dtemp_1;
+	reg2 = tsr->ctrl_dtemp_2;
+
+	/* read temperature from history buffer */
+	temp1 = ti_bandgap_readl(bgp, reg1);
+	temp1 &= tsr->bgap_dtemp_mask;
+
+	temp2 = ti_bandgap_readl(bgp, reg2);
+	temp2 &= tsr->bgap_dtemp_mask;
+
+	/* Convert from adc values to mCelsius temperature */
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1);
+	if (ret)
+		goto unfreeze;
+
+	ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2);
+	if (ret)
+		goto unfreeze;
+
+	/* Fetch the update interval */
+	ret = ti_bandgap_read_update_interval(bgp, id, &interval);
+	if (ret)
+		goto unfreeze;
+
+	/* Set the interval to 1 ms if bandgap counter delay is not set */
+	if (interval == 0)
+		interval = 1;
+
+	*trend = (t1 - t2) / interval;
+
+	dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
+		t1, t2, *trend);
+
+unfreeze:
+	RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+	spin_unlock(&bgp->lock);
+exit:
+	return ret;
+}
+
+/**
+ * ti_bandgap_tshut_init() - setup and initialize tshut handling
+ * @bgp: pointer to struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Call this function only in case the bandgap features HAS(TSHUT).
+ * In this case, the driver needs to handle the TSHUT signal as an IRQ.
+ * The IRQ is wired as a GPIO, and for this purpose, it is required
+ * to specify which GPIO line is used. TSHUT IRQ is fired anytime
+ * one of the bandgap sensors violates the TSHUT high/hot threshold.
+ * And in that case, the system must go off.
+ *
+ * Return: 0 if no error, else error status
+ */
+static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
+				 struct platform_device *pdev)
+{
+	int gpio_nr = bgp->tshut_gpio;
+	int status;
+
+	/* Request for gpio_86 line */
+	status = gpio_request(gpio_nr, "tshut");
+	if (status < 0) {
+		dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86);
+		return status;
+	}
+	status = gpio_direction_input(gpio_nr);
+	if (status) {
+		dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr);
+		return status;
+	}
+
+	status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler,
+			     IRQF_TRIGGER_RISING, "tshut", NULL);
+	if (status) {
+		gpio_free(gpio_nr);
+		dev_err(bgp->dev, "request irq failed for TSHUT");
+	}
+
+	return 0;
+}
+
+/**
+ * ti_bandgap_alert_init() - setup and initialize talert handling
+ * @bgp: pointer to struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Call this function only in case the bandgap features HAS(TALERT).
+ * In this case, the driver needs to handle the TALERT signals as an IRQs.
+ * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
+ * are violated. In these situation, the driver must reprogram the thresholds,
+ * accordingly to specified policy.
+ *
+ * Return: 0 if no error, else return corresponding error.
+ */
+static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
+				  struct platform_device *pdev)
+{
+	int ret;
+
+	bgp->irq = platform_get_irq(pdev, 0);
+	if (bgp->irq < 0) {
+		dev_err(&pdev->dev, "get_irq failed\n");
+		return bgp->irq;
+	}
+	ret = request_threaded_irq(bgp->irq, NULL,
+				   ti_bandgap_talert_irq_handler,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   "talert", bgp);
+	if (ret) {
+		dev_err(&pdev->dev, "Request threaded irq failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_ti_bandgap_match[];
+/**
+ * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
+ * @pdev: pointer to device struct platform_device
+ *
+ * Used to read the device tree properties accordingly to the bandgap
+ * matching version. Based on bandgap version and its capabilities it
+ * will build a struct ti_bandgap out of the required DT entries.
+ *
+ * Return: valid bandgap structure if successful, else returns ERR_PTR
+ * return value must be verified with IS_ERR.
+ */
+static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	struct ti_bandgap *bgp;
+	struct resource *res;
+	int i;
+
+	/* just for the sake */
+	if (!node) {
+		dev_err(&pdev->dev, "no platform information available\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
+	if (!bgp) {
+		dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
+	if (of_id)
+		bgp->conf = of_id->data;
+
+	/* register shadow for context save and restore */
+	bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
+				   bgp->conf->sensor_count, GFP_KERNEL);
+	if (!bgp->regval) {
+		dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	i = 0;
+	do {
+		void __iomem *chunk;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			break;
+		chunk = devm_ioremap_resource(&pdev->dev, res);
+		if (i == 0)
+			bgp->base = chunk;
+		if (IS_ERR(chunk))
+			return ERR_CAST(chunk);
+
+		i++;
+	} while (res);
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		bgp->tshut_gpio = of_get_gpio(node, 0);
+		if (!gpio_is_valid(bgp->tshut_gpio)) {
+			dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
+				bgp->tshut_gpio);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	return bgp;
+}
+
+/***   Device driver call backs   ***/
+
+static
+int ti_bandgap_probe(struct platform_device *pdev)
+{
+	struct ti_bandgap *bgp;
+	int clk_rate, ret = 0, i;
+
+	bgp = ti_bandgap_build(pdev);
+	if (IS_ERR(bgp)) {
+		dev_err(&pdev->dev, "failed to fetch platform data\n");
+		return PTR_ERR(bgp);
+	}
+	bgp->dev = &pdev->dev;
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		ret = ti_bandgap_tshut_init(bgp, pdev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to initialize system tshut IRQ\n");
+			return ret;
+		}
+	}
+
+	bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
+	ret = IS_ERR(bgp->fclock);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request fclock reference\n");
+		ret = PTR_ERR(bgp->fclock);
+		goto free_irqs;
+	}
+
+	bgp->div_clk = clk_get(NULL,  bgp->conf->div_ck_name);
+	ret = IS_ERR(bgp->div_clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to request div_ts_ck clock ref\n");
+		ret = PTR_ERR(bgp->div_clk);
+		goto free_irqs;
+	}
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		u32 val;
+
+		tsr = bgp->conf->sensors[i].registers;
+		/*
+		 * check if the efuse has a non-zero value if not
+		 * it is an untrimmed sample and the temperatures
+		 * may not be accurate
+		 */
+		val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
+		if (ret || !val)
+			dev_info(&pdev->dev,
+				 "Non-trimmed BGAP, Temp not accurate\n");
+	}
+
+	clk_rate = clk_round_rate(bgp->div_clk,
+				  bgp->conf->sensors[0].ts_data->max_freq);
+	if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
+	    clk_rate <= 0) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
+		goto put_clks;
+	}
+
+	ret = clk_set_rate(bgp->div_clk, clk_rate);
+	if (ret)
+		dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
+
+	bgp->clk_rate = clk_rate;
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_prepare_enable(bgp->fclock);
+
+
+	spin_lock_init(&bgp->lock);
+	bgp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, bgp);
+
+	ti_bandgap_power(bgp, true);
+
+	/* Set default counter to 1 for now */
+	if (TI_BANDGAP_HAS(bgp, COUNTER))
+		for (i = 0; i < bgp->conf->sensor_count; i++)
+			RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
+
+	/* Set default thresholds for alert and shutdown */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_data *ts_data;
+
+		ts_data = bgp->conf->sensors[i].ts_data;
+
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			/* Set initial Talert thresholds */
+			RMW_BITS(bgp, i, bgap_threshold,
+				 threshold_tcold_mask, ts_data->t_cold);
+			RMW_BITS(bgp, i, bgap_threshold,
+				 threshold_thot_mask, ts_data->t_hot);
+			/* Enable the alert events */
+			RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
+			RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
+		}
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
+			/* Set initial Tshut thresholds */
+			RMW_BITS(bgp, i, tshut_threshold,
+				 tshut_hot_mask, ts_data->tshut_hot);
+			RMW_BITS(bgp, i, tshut_threshold,
+				 tshut_cold_mask, ts_data->tshut_cold);
+		}
+	}
+
+	if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+		ti_bandgap_set_continuous_mode(bgp);
+
+	/* Set .250 seconds time as default counter */
+	if (TI_BANDGAP_HAS(bgp, COUNTER))
+		for (i = 0; i < bgp->conf->sensor_count; i++)
+			RMW_BITS(bgp, i, bgap_counter, counter_mask,
+				 bgp->clk_rate / 4);
+
+	/* Every thing is good? Then expose the sensors */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		char *domain;
+
+		if (bgp->conf->sensors[i].register_cooling) {
+			ret = bgp->conf->sensors[i].register_cooling(bgp, i);
+			if (ret)
+				goto remove_sensors;
+		}
+
+		if (bgp->conf->expose_sensor) {
+			domain = bgp->conf->sensors[i].domain;
+			ret = bgp->conf->expose_sensor(bgp, i, domain);
+			if (ret)
+				goto remove_last_cooling;
+		}
+	}
+
+	/*
+	 * Enable the Interrupts once everything is set. Otherwise irq handler
+	 * might be called as soon as it is enabled where as rest of framework
+	 * is still getting initialised.
+	 */
+	if (TI_BANDGAP_HAS(bgp, TALERT)) {
+		ret = ti_bandgap_talert_init(bgp, pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
+			i = bgp->conf->sensor_count;
+			goto disable_clk;
+		}
+	}
+
+	return 0;
+
+remove_last_cooling:
+	if (bgp->conf->sensors[i].unregister_cooling)
+		bgp->conf->sensors[i].unregister_cooling(bgp, i);
+remove_sensors:
+	for (i--; i >= 0; i--) {
+		if (bgp->conf->sensors[i].unregister_cooling)
+			bgp->conf->sensors[i].unregister_cooling(bgp, i);
+		if (bgp->conf->remove_sensor)
+			bgp->conf->remove_sensor(bgp, i);
+	}
+	ti_bandgap_power(bgp, false);
+disable_clk:
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+put_clks:
+	clk_put(bgp->fclock);
+	clk_put(bgp->div_clk);
+free_irqs:
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+		gpio_free(bgp->tshut_gpio);
+	}
+
+	return ret;
+}
+
+static
+int ti_bandgap_remove(struct platform_device *pdev)
+{
+	struct ti_bandgap *bgp = platform_get_drvdata(pdev);
+	int i;
+
+	/* First thing is to remove sensor interfaces */
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		if (bgp->conf->sensors[i].unregister_cooling)
+			bgp->conf->sensors[i].unregister_cooling(bgp, i);
+
+		if (bgp->conf->remove_sensor)
+			bgp->conf->remove_sensor(bgp, i);
+	}
+
+	ti_bandgap_power(bgp, false);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+	clk_put(bgp->fclock);
+	clk_put(bgp->div_clk);
+
+	if (TI_BANDGAP_HAS(bgp, TALERT))
+		free_irq(bgp->irq, bgp);
+
+	if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+		free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+		gpio_free(bgp->tshut_gpio);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		struct temp_sensor_regval *rval;
+
+		rval = &bgp->regval[i];
+		tsr = bgp->conf->sensors[i].registers;
+
+		if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+			rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
+							tsr->bgap_mode_ctrl);
+		if (TI_BANDGAP_HAS(bgp, COUNTER))
+			rval->bg_counter = ti_bandgap_readl(bgp,
+							tsr->bgap_counter);
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			rval->bg_threshold = ti_bandgap_readl(bgp,
+							tsr->bgap_threshold);
+			rval->bg_ctrl = ti_bandgap_readl(bgp,
+						   tsr->bgap_mask_ctrl);
+		}
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+			rval->tshut_threshold = ti_bandgap_readl(bgp,
+						   tsr->tshut_threshold);
+	}
+
+	return 0;
+}
+
+static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
+{
+	int i;
+
+	for (i = 0; i < bgp->conf->sensor_count; i++) {
+		struct temp_sensor_registers *tsr;
+		struct temp_sensor_regval *rval;
+		u32 val = 0;
+
+		rval = &bgp->regval[i];
+		tsr = bgp->conf->sensors[i].registers;
+
+		if (TI_BANDGAP_HAS(bgp, COUNTER))
+			val = ti_bandgap_readl(bgp, tsr->bgap_counter);
+
+		if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+			ti_bandgap_writel(bgp, rval->tshut_threshold,
+					  tsr->tshut_threshold);
+		/* Force immediate temperature measurement and update
+		 * of the DTEMP field
+		 */
+		ti_bandgap_force_single_read(bgp, i);
+
+		if (TI_BANDGAP_HAS(bgp, COUNTER))
+			ti_bandgap_writel(bgp, rval->bg_counter,
+					  tsr->bgap_counter);
+		if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+			ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
+					  tsr->bgap_mode_ctrl);
+		if (TI_BANDGAP_HAS(bgp, TALERT)) {
+			ti_bandgap_writel(bgp, rval->bg_threshold,
+					  tsr->bgap_threshold);
+			ti_bandgap_writel(bgp, rval->bg_ctrl,
+					  tsr->bgap_mask_ctrl);
+		}
+	}
+
+	return 0;
+}
+
+static int ti_bandgap_suspend(struct device *dev)
+{
+	struct ti_bandgap *bgp = dev_get_drvdata(dev);
+	int err;
+
+	err = ti_bandgap_save_ctxt(bgp);
+	ti_bandgap_power(bgp, false);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_disable_unprepare(bgp->fclock);
+
+	return err;
+}
+
+static int ti_bandgap_resume(struct device *dev)
+{
+	struct ti_bandgap *bgp = dev_get_drvdata(dev);
+
+	if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
+		clk_prepare_enable(bgp->fclock);
+
+	ti_bandgap_power(bgp, true);
+
+	return ti_bandgap_restore_ctxt(bgp);
+}
+static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
+			 ti_bandgap_resume);
+
+#define DEV_PM_OPS	(&ti_bandgap_dev_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static const struct of_device_id of_ti_bandgap_match[] = {
+#ifdef CONFIG_OMAP4_THERMAL
+	{
+		.compatible = "ti,omap4430-bandgap",
+		.data = (void *)&omap4430_data,
+	},
+	{
+		.compatible = "ti,omap4460-bandgap",
+		.data = (void *)&omap4460_data,
+	},
+	{
+		.compatible = "ti,omap4470-bandgap",
+		.data = (void *)&omap4470_data,
+	},
+#endif
+#ifdef CONFIG_OMAP5_THERMAL
+	{
+		.compatible = "ti,omap5430-bandgap",
+		.data = (void *)&omap5430_data,
+	},
+#endif
+#ifdef CONFIG_DRA752_THERMAL
+	{
+		.compatible = "ti,dra752-bandgap",
+		.data = (void *)&dra752_data,
+	},
+#endif
+	/* Sentinel */
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
+
+static struct platform_driver ti_bandgap_sensor_driver = {
+	.probe = ti_bandgap_probe,
+	.remove = ti_bandgap_remove,
+	.driver = {
+			.name = "ti-soc-thermal",
+			.pm = DEV_PM_OPS,
+			.of_match_table	= of_ti_bandgap_match,
+	},
+};
+
+module_platform_driver(ti_bandgap_sensor_driver);
+
+MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ti-soc-thermal");
+MODULE_AUTHOR("Texas Instrument Inc.");