summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/68328serial.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
commitd635711daa98be86d4c7fd01499c34f566b54ccb (patch)
treeaa5cc3760a27c3d57146498cb82fa549547de06c /drivers/tty/serial/68328serial.c
parentc91265cd0efb83778f015b4d4b1129bd2cfd075e (diff)
Linux-libre 4.6.2-gnu
Diffstat (limited to 'drivers/tty/serial/68328serial.c')
-rw-r--r--drivers/tty/serial/68328serial.c1322
1 files changed, 0 insertions, 1322 deletions
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
deleted file mode 100644
index 0982c1a44..000000000
--- a/drivers/tty/serial/68328serial.c
+++ /dev/null
@@ -1,1322 +0,0 @@
-/* 68328serial.c: Serial port driver for 68328 microcontroller
- *
- * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com>
- *
- * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
- * Multiple UART support Daniel Potts <danielp@cse.unsw.edu.au>
- * Power management support Daniel Potts <danielp@cse.unsw.edu.au>
- * VZ Second Serial Port enable Phil Wilshire
- * 2.4/2.5 port David McCullough
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/serial.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/reboot.h>
-#include <linux/keyboard.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-
-/* (es) */
-/* note: perhaps we can murge these files, so that you can just
- * define 1 of them, and they can sort that out for themselves
- */
-#if defined(CONFIG_M68EZ328)
-#include <asm/MC68EZ328.h>
-#else
-#if defined(CONFIG_M68VZ328)
-#include <asm/MC68VZ328.h>
-#else
-#include <asm/MC68328.h>
-#endif /* CONFIG_M68VZ328 */
-#endif /* CONFIG_M68EZ328 */
-
-/* Turn off usage of real serial interrupt code, to "support" Copilot */
-#ifdef CONFIG_XCOPILOT_BUGS
-#undef USE_INTS
-#else
-#define USE_INTS
-#endif
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- * -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real 328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- * -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- */
-struct m68k_serial {
- struct tty_port tport;
- char is_cons; /* Is this our console. */
- int magic;
- int baud_base;
- int port;
- int irq;
- int type; /* UART type */
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int line;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
-};
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-
-static struct m68k_serial m68k_soft[NR_PORTS];
-
-static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };
-
-/* multiple ports are contiguous in memory */
-m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
-
-struct tty_driver *serial_driver;
-
-static void change_speed(struct m68k_serial *info, struct tty_struct *tty);
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
-#ifdef CONFIG_M68VZ328
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-
-static int m68328_console_initted;
-static int m68328_console_baud = CONSOLE_BAUD_RATE;
-static int m68328_console_cbaud = DEFAULT_CBAUD;
-
-
-static inline int serial_paranoia_check(struct m68k_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char *badmagic =
- "Warning: bad magic number for serial struct %s in %s\n";
- static const char *badinfo =
- "Warning: null m68k_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts
- */
-static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 0 };
-
-/* Utility routines */
-static inline int get_baud(struct m68k_serial *ss)
-{
- unsigned long result = 115200;
- unsigned short int baud = uart_addr[ss->line].ubaud;
- if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400;
- result >>= GET_FIELD(baud, UBAUD_DIVIDE);
-
- return result;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_stop"))
- return;
-
- local_irq_save(flags);
- uart->ustcnt &= ~USTCNT_TXEN;
- local_irq_restore(flags);
-}
-
-static int rs_put_char(char ch)
-{
- unsigned long flags;
- int loops = 0;
-
- local_irq_save(flags);
-
- while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
- loops++;
- udelay(5);
- }
-
- UTX_TXDATA = ch;
- udelay(5);
- local_irq_restore(flags);
- return 1;
-}
-
-static void rs_start(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt |= USTCNT_TXEN;
-#endif
- }
- local_irq_restore(flags);
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned char ch, flag;
-
- /*
- * This do { } while() loop will get ALL chars out of Rx FIFO
- */
-#ifndef CONFIG_XCOPILOT_BUGS
- do {
-#endif
- ch = GET_FIELD(rx, URX_RXDATA);
-
- if (info->is_cons) {
- if (URX_BREAK & rx) { /* whee, break received */
- return;
-#ifdef CONFIG_MAGIC_SYSRQ
- } else if (ch == 0x10) { /* ^P */
- show_state();
- show_free_areas(0);
- show_buffers();
-/* show_net_buffers(); */
- return;
- } else if (ch == 0x12) { /* ^R */
- emergency_restart();
- return;
-#endif /* CONFIG_MAGIC_SYSRQ */
- }
- }
-
- flag = TTY_NORMAL;
-
- if (rx & URX_PARITY_ERROR)
- flag = TTY_PARITY;
- else if (rx & URX_OVRUN)
- flag = TTY_OVERRUN;
- else if (rx & URX_FRAME_ERROR)
- flag = TTY_FRAME;
-
- tty_insert_flip_char(&info->tport, ch, flag);
-#ifndef CONFIG_XCOPILOT_BUGS
- } while ((rx = uart->urx.w) & URX_DATA_READY);
-#endif
-
- tty_schedule_flip(&info->tport);
-}
-
-static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
-
- if (info->x_char) {
- /* Send next char */
- uart->utx.b.txdata = info->x_char;
- info->x_char = 0;
- goto clear_and_return;
- }
-
- if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
- /* That's peculiar... TX ints off */
- uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
- goto clear_and_return;
- }
-
- /* Send char */
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
-
- if (info->xmit_cnt <= 0) {
- /* All done for now... TX ints off */
- uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
- goto clear_and_return;
- }
-
-clear_and_return:
- /* Clear interrupt (should be auto)*/
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t rs_interrupt(int irq, void *dev_id)
-{
- struct m68k_serial *info = dev_id;
- struct tty_struct *tty = tty_port_tty_get(&info->tport);
- m68328_uart *uart;
- unsigned short rx;
- unsigned short tx;
-
- uart = &uart_addr[info->line];
- rx = uart->urx.w;
-
-#ifdef USE_INTS
- tx = uart->utx.w;
-
- if (rx & URX_DATA_READY)
- receive_chars(info, rx);
- if (tx & UTX_TX_AVAIL)
- transmit_chars(info, tty);
-#else
- receive_chars(info, rx);
-#endif
- tty_kref_put(tty);
-
- return IRQ_HANDLED;
-}
-
-static int startup(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (info->tport.flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
- /*
- * Clear the FIFO buffers and disable them
- * (they will be reenabled in change_speed())
- */
-
- uart->ustcnt = USTCNT_UEN;
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
- (void)uart->urx.w;
-
- /*
- * Finally, enable sequencing and interrupts
- */
-#ifdef USE_INTS
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
- USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
-#endif
-
- if (tty)
- clear_bit(TTY_IO_ERROR, &tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
-
- change_speed(info, tty);
-
- info->tport.flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- uart->ustcnt = 0; /* All off! */
- if (!(info->tport.flags & ASYNC_INITIALIZED))
- return;
-
- local_irq_save(flags);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
-
- info->tport.flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-struct {
- int divisor, prescale;
-}
-#ifndef CONFIG_M68VZ328
- hw_baud_table[18] = {
- {0, 0}, /* 0 */
- {0, 0}, /* 50 */
- {0, 0}, /* 75 */
- {0, 0}, /* 110 */
- {0, 0}, /* 134 */
- {0, 0}, /* 150 */
- {0, 0}, /* 200 */
- {7, 0x26}, /* 300 */
- {6, 0x26}, /* 600 */
- {5, 0x26}, /* 1200 */
- {0, 0}, /* 1800 */
- {4, 0x26}, /* 2400 */
- {3, 0x26}, /* 4800 */
- {2, 0x26}, /* 9600 */
- {1, 0x26}, /* 19200 */
- {0, 0x26}, /* 38400 */
- {1, 0x38}, /* 57600 */
- {0, 0x38}, /* 115200 */
-};
-#else
- hw_baud_table[18] = {
- {0, 0}, /* 0 */
- {0, 0}, /* 50 */
- {0, 0}, /* 75 */
- {0, 0}, /* 110 */
- {0, 0}, /* 134 */
- {0, 0}, /* 150 */
- {0, 0}, /* 200 */
- {0, 0}, /* 300 */
- {7, 0x26}, /* 600 */
- {6, 0x26}, /* 1200 */
- {0, 0}, /* 1800 */
- {5, 0x26}, /* 2400 */
- {4, 0x26}, /* 4800 */
- {3, 0x26}, /* 9600 */
- {2, 0x26}, /* 19200 */
- {1, 0x26}, /* 38400 */
- {0, 0x26}, /* 57600 */
- {1, 0x38}, /* 115200 */
-};
-#endif
-/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned short port;
- unsigned short ustcnt;
- unsigned cflag;
- int i;
-
- cflag = tty->termios.c_cflag;
- port = info->port;
- if (!port)
- return;
-
- ustcnt = uart->ustcnt;
- uart->ustcnt = ustcnt & ~USTCNT_TXEN;
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i = (i & ~CBAUDEX) + B38400;
- }
-
- uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
- PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
-
- ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
-
- if ((cflag & CSIZE) == CS8)
- ustcnt |= USTCNT_8_7;
-
- if (cflag & CSTOPB)
- ustcnt |= USTCNT_STOP;
-
- if (cflag & PARENB)
- ustcnt |= USTCNT_PARITYEN;
- if (cflag & PARODD)
- ustcnt |= USTCNT_ODD_EVEN;
-
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- if (cflag & CRTSCTS) {
- uart->utx.w &= ~UTX_NOCTS;
- } else {
- uart->utx.w |= UTX_NOCTS;
- }
-#endif
-
- ustcnt |= USTCNT_TXEN;
-
- uart->ustcnt = ustcnt;
- return;
-}
-
-/*
- * Fair output driver allows a process to speak.
- */
-static void rs_fair_output(void)
-{
- int left; /* Output no more than that */
- unsigned long flags;
- struct m68k_serial *info = &m68k_soft[0];
- char c;
-
- if (info == NULL) return;
- if (info->xmit_buf == NULL) return;
-
- local_irq_save(flags);
- left = info->xmit_cnt;
- while (left != 0) {
- c = info->xmit_buf[info->xmit_tail];
- info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- local_irq_restore(flags);
-
- rs_put_char(c);
-
- local_irq_save(flags);
- left = min(info->xmit_cnt, left-1);
- }
-
- /* Last character is being transmitted now (hopefully). */
- udelay(5);
-
- local_irq_restore(flags);
- return;
-}
-
-/*
- * m68k_console_print is registered for printk.
- */
-void console_print_68328(const char *p)
-{
- char c;
-
- while ((c = *(p++)) != 0) {
- if (c == '\n')
- rs_put_char('\r');
- rs_put_char(c);
- }
-
- /* Comment this if you want to have a strict interrupt-driven output */
- rs_fair_output();
-
- return;
-}
-
-static void rs_set_ldisc(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
- return;
-
- info->is_cons = (tty->termios.c_line == N_TTY);
-
- printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
- return;
-#ifndef USE_INTS
- for (;;) {
-#endif
-
- /* Enable transmitter */
- local_irq_save(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt |= USTCNT_TXEN;
-#endif
-
-#ifdef USE_INTS
- if (uart->utx.w & UTX_TX_AVAIL) {
-#else
- if (1) {
-#endif
- /* Send char */
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- }
-
-#ifndef USE_INTS
- while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
- }
-#endif
- local_irq_restore(flags);
-}
-
-extern void console_printn(const char *b, int count);
-
-static int rs_write(struct tty_struct *tty,
- const unsigned char *buf, int count)
-{
- int c, total = 0;
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
- buf += c;
- count -= c;
- total += c;
- }
-
- if (info->xmit_cnt && !tty->stopped) {
- /* Enable transmitter */
- local_irq_disable();
-#ifndef USE_INTS
- while (info->xmit_cnt) {
-#endif
-
- uart->ustcnt |= USTCNT_TXEN;
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TX_INTR_MASK;
-#else
- while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
-#endif
- if (uart->utx.w & UTX_TX_AVAIL) {
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- }
-
-#ifndef USE_INTS
- }
-#endif
- local_irq_restore(flags);
- }
-
- return total;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "rs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
- return;
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void rs_unthrottle(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct m68k_serial *info,
- struct serial_struct *retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = info->port;
- tmp.irq = info->irq;
- tmp.flags = info->tport.flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->tport.close_delay;
- tmp.closing_wait = info->tport.closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
-
- return 0;
-}
-
-static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
- struct serial_struct *new_info)
-{
- struct tty_port *port = &info->tport;
- struct serial_struct new_serial;
- struct m68k_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != port->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (port->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- port->close_delay = new_serial.close_delay;
- port->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info, tty);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct m68k_serial *info, unsigned int *value)
-{
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- m68328_uart *uart = &uart_addr[info->line];
-#endif
- unsigned char status;
- unsigned long flags;
-
- local_irq_save(flags);
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
-#else
- status = 0;
-#endif
- local_irq_restore(flags);
- return put_user(status, value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(struct m68k_serial *info, unsigned int duration)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
- if (!info->port)
- return;
- local_irq_save(flags);
-#ifdef USE_INTS
- uart->utx.w |= UTX_SEND_BREAK;
- msleep_interruptible(duration);
- uart->utx.w &= ~UTX_SEND_BREAK;
-#endif
- local_irq_restore(flags);
-}
-
-static int rs_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- int retval;
-
- if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, 250); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(100) : 250);
- return 0;
- case TIOCGSERIAL:
- return get_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSSERIAL:
- return set_serial_info(info, tty,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, (unsigned int *) arg);
- case TIOCSERGSTRUCT:
- if (copy_to_user((struct m68k_serial *) arg,
- info, sizeof(struct m68k_serial)))
- return -EFAULT;
- return 0;
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- change_speed(info, tty);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS))
- rs_start(tty);
-
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_close(struct tty_struct *tty, struct file *filp)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- struct tty_port *port = &info->tport;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
- if ((tty->count == 1) && (port->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("rs_close: bad serial port count; tty->count is 1, "
- "port->count is %d\n", port->count);
- port->count = 1;
- }
- if (--port->count < 0) {
- printk("rs_close: bad serial port count for ttyS%d: %d\n",
- info->line, port->count);
- port->count = 0;
- }
- if (port->count) {
- local_irq_restore(flags);
- return;
- }
- port->flags |= ASYNC_CLOSING;
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
-
- uart->ustcnt &= ~USTCNT_RXEN;
- uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
-
- shutdown(info, tty);
- rs_flush_buffer(tty);
-
- tty_ldisc_flush(tty);
- tty->closing = 0;
- tty_port_tty_set(&info->tport, NULL);
-#warning "This is not and has never been valid so fix it"
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios.c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (port->blocked_open) {
- if (port->close_delay)
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
- wake_up_interruptible(&port->open_wait);
- }
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- local_irq_restore(flags);
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void rs_hangup(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_hangup"))
- return;
-
- rs_flush_buffer(tty);
- shutdown(info, tty);
- info->tport.count = 0;
- info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
- tty_port_tty_set(&info->tport, NULL);
- wake_up_interruptible(&info->tport.open_wait);
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its S structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int rs_open(struct tty_struct *tty, struct file *filp)
-{
- struct m68k_serial *info;
- int retval;
-
- info = &m68k_soft[tty->index];
-
- if (serial_paranoia_check(info, tty->name, "rs_open"))
- return -ENODEV;
-
- info->tport.count++;
- tty->driver_data = info;
- tty_port_tty_set(&info->tport, tty);
-
- /*
- * Start up serial port
- */
- retval = startup(info, tty);
- if (retval)
- return retval;
-
- return tty_port_block_til_ready(&info->tport, tty, filp);
-}
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk("MC68328 serial driver version 1.00\n");
-}
-
-static const struct tty_operations rs_ops = {
- .open = rs_open,
- .close = rs_close,
- .write = rs_write,
- .flush_chars = rs_flush_chars,
- .write_room = rs_write_room,
- .chars_in_buffer = rs_chars_in_buffer,
- .flush_buffer = rs_flush_buffer,
- .ioctl = rs_ioctl,
- .throttle = rs_throttle,
- .unthrottle = rs_unthrottle,
- .set_termios = rs_set_termios,
- .stop = rs_stop,
- .start = rs_start,
- .hangup = rs_hangup,
- .set_ldisc = rs_set_ldisc,
-};
-
-static const struct tty_port_operations rs_port_ops = {
-};
-
-/* rs_init inits the driver */
-static int __init
-rs68328_init(void)
-{
- unsigned long flags;
- int i;
- struct m68k_serial *info;
-
- serial_driver = alloc_tty_driver(NR_PORTS);
- if (!serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- /* SPARC: Not all of this is exactly right for us. */
-
- serial_driver->name = "ttyS";
- serial_driver->major = TTY_MAJOR;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &rs_ops);
-
- local_irq_save(flags);
-
- for (i = 0; i < NR_PORTS; i++) {
-
- info = &m68k_soft[i];
- tty_port_init(&info->tport);
- info->tport.ops = &rs_port_ops;
- info->magic = SERIAL_MAGIC;
- info->port = (int) &uart_addr[i];
- info->irq = uart_irqs[i];
- info->custom_divisor = 16;
- info->x_char = 0;
- info->line = i;
- info->is_cons = 1; /* Means shortcuts work */
-
- printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line,
- info->port, info->irq);
- printk(" is a builtin MC68328 UART\n");
-
-#ifdef CONFIG_M68VZ328
- if (i > 0)
- PJSEL &= 0xCF; /* PSW enable second port output */
-#endif
-
- if (request_irq(uart_irqs[i],
- rs_interrupt,
- 0,
- "M68328_UART", info))
- panic("Unable to attach 68328 serial interrupt\n");
-
- tty_port_link_device(&info->tport, serial_driver, i);
- }
- local_irq_restore(flags);
-
- if (tty_register_driver(serial_driver)) {
- put_tty_driver(serial_driver);
- for (i = 0; i < NR_PORTS; i++)
- tty_port_destroy(&m68k_soft[i].tport);
- printk(KERN_ERR "Couldn't register serial driver\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-module_init(rs68328_init);
-
-
-
-static void m68328_set_baud(void)
-{
- unsigned short ustcnt;
- int i;
-
- ustcnt = USTCNT;
- USTCNT = ustcnt & ~USTCNT_TXEN;
-
-again:
- for (i = 0; i < ARRAY_SIZE(baud_table); i++)
- if (baud_table[i] == m68328_console_baud)
- break;
- if (i >= ARRAY_SIZE(baud_table)) {
- m68328_console_baud = 9600;
- goto again;
- }
-
- UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
- PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
- ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
- ustcnt |= USTCNT_8_7;
- ustcnt |= USTCNT_TXEN;
- USTCNT = ustcnt;
- m68328_console_initted = 1;
- return;
-}
-
-
-int m68328_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg, NULL, 0);
-
- for (i = 0; i < ARRAY_SIZE(baud_table); i++)
- if (baud_table[i] == n)
- break;
- if (i < ARRAY_SIZE(baud_table)) {
- m68328_console_baud = n;
- m68328_console_cbaud = 0;
- if (i > 15) {
- m68328_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- m68328_console_cbaud |= i;
- }
-
- m68328_set_baud(); /* make sure baud rate changes */
- return 0;
-}
-
-
-static struct tty_driver *m68328_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return serial_driver;
-}
-
-
-void m68328_console_write (struct console *co, const char *str,
- unsigned int count)
-{
- if (!m68328_console_initted)
- m68328_set_baud();
- while (count--) {
- if (*str == '\n')
- rs_put_char('\r');
- rs_put_char(*str++);
- }
-}
-
-
-static struct console m68328_driver = {
- .name = "ttyS",
- .write = m68328_console_write,
- .device = m68328_console_device,
- .setup = m68328_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-
-static int __init m68328_console_init(void)
-{
- register_console(&m68328_driver);
- return 0;
-}
-
-console_initcall(m68328_console_init);