Linux-libre 4.2.1-gnupck-4.2.1-gnu

4 files changed, 86 insertions, 22 deletions

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index d75a66c72..b470df122 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -100,6 +100,7 @@ struct omap8250_priv {
 	struct work_struct qos_work;
 	struct uart_8250_dma omap8250_dma;
 	spinlock_t rx_dma_lock;
+	bool rx_dma_broken;
 };
 
 static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -754,6 +755,7 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 	struct omap8250_priv	*priv = p->port.private_data;
 	struct uart_8250_dma	*dma = p->dma;
 	unsigned long		flags;
+	int ret;
 
 	spin_lock_irqsave(&priv->rx_dma_lock, flags);
 
@@ -762,7 +764,9 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 		return;
 	}
 
-	dmaengine_pause(dma->rxchan);
+	ret = dmaengine_pause(dma->rxchan);
+	if (WARN_ON_ONCE(ret))
+		priv->rx_dma_broken = true;
 
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
 
@@ -806,6 +810,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
 		break;
 	}
 
+	if (priv->rx_dma_broken)
+		return -EINVAL;
+
 	spin_lock_irqsave(&priv->rx_dma_lock, flags);
 
 	if (dma->rx_running)
@@ -1180,6 +1187,11 @@ static int omap8250_probe(struct platform_device *pdev)
 
 			if (of_machine_is_compatible("ti,am33xx"))
 				priv->habit |= OMAP_DMA_TX_KICK;
+			/*
+			 * pause is currently not supported atleast on omap-sdma
+			 * and edma on most earlier kernels.
+			 */
+			priv->rx_dma_broken = true;
 		}
 	}
 #endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e55f18b93..46ddce479 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2017,6 +2017,12 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 
+#define PCI_VENDOR_ID_PERICOM			0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -2331,27 +2337,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	 * Pericom
 	 */
 	{
-		.vendor		= 0x12d8,
-		.device		= 0x7952,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7954,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
-	},
-	{
-		.vendor		= 0x12d8,
-		.device		= 0x7958,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_pericom_setup,
+		.vendor         = PCI_VENDOR_ID_PERICOM,
+		.device         = PCI_ANY_ID,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_pericom_setup,
 	},
-
 	/*
 	 * PLX
 	 */
@@ -3056,6 +3047,10 @@ enum pci_board_num_t {
 	pbn_fintek_8,
 	pbn_fintek_12,
 	pbn_wch384_4,
+	pbn_pericom_PI7C9X7951,
+	pbn_pericom_PI7C9X7952,
+	pbn_pericom_PI7C9X7954,
+	pbn_pericom_PI7C9X7958,
 };
 
 /*
@@ -3881,7 +3876,6 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
-
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -3889,6 +3883,33 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset    = 8,
 		.first_offset   = 0xC0,
 	},
+	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	[pbn_pericom_PI7C9X7951] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7952] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7954] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_pericom_PI7C9X7958] = {
+		.flags          = FL_BASE0,
+		.num_ports      = 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -5154,6 +5175,25 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		0, pbn_exar_XR17V8358 },
 	/*
+	 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+	 */
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7951 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7952 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7954 },
+	{   PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0,
+		0, pbn_pericom_PI7C9X7958 },
+	/*
 	 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
 	 */
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 50a09cd76..658b392d1 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -41,6 +41,12 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"AEI1240",		0	},
 	/* Rockwell 56K ACF II Fax+Data+Voice Modem */
 	{	"AKY1021",		0 /*SPCI_FL_NO_SHIRQ*/	},
+	/*
+	 * ALi Fast Infrared Controller
+	 * Native driver (ali-ircc) is broken so at least
+	 * it can be used with irtty-sir.
+	 */
+	{	"ALI5123",		0	},
 	/* AZT3005 PnP SOUND DEVICE */
 	{	"AZT4001",		0	},
 	/* Best Data Products Inc. Smart One 336F PnP Modem */
@@ -364,6 +370,11 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* Winbond CIR port, should not be probed. We should keep track
 	   of it to prevent the legacy serial driver from probing it */
 	{	"WEC1022",		CIR_PORT	},
+	/*
+	 * SMSC IrCC SIR/FIR port, should not be probed by serial driver
+	 * as well so its own driver can bind to it.
+	 */
+	{	"SMCF010",		CIR_PORT	},
 	{	"",			0	}
 };
 
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 7d79425c2..d11621e2c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -218,6 +218,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	ret = serial8250_register_8250_port(&up);
 	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
+		clk_disable_unprepare(priv->clk);
 		return ret;
 	}