Linux-libre 4.5-gnu

1 files changed, 221 insertions, 120 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 899a77187..c0da0ccbb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -60,6 +60,8 @@
 #include <linux/io.h>
 #include <linux/acpi.h>
 
+#include "amba-pl011.h"
+
 #define UART_NR			14
 
 #define SERIAL_AMBA_MAJOR	204
@@ -71,11 +73,27 @@
 #define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
 #define UART_DUMMY_DR_RX	(1 << 16)
 
+static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
+	[REG_DR] = UART01x_DR,
+	[REG_FR] = UART01x_FR,
+	[REG_LCRH_RX] = UART011_LCRH,
+	[REG_LCRH_TX] = UART011_LCRH,
+	[REG_IBRD] = UART011_IBRD,
+	[REG_FBRD] = UART011_FBRD,
+	[REG_CR] = UART011_CR,
+	[REG_IFLS] = UART011_IFLS,
+	[REG_IMSC] = UART011_IMSC,
+	[REG_RIS] = UART011_RIS,
+	[REG_MIS] = UART011_MIS,
+	[REG_ICR] = UART011_ICR,
+	[REG_DMACR] = UART011_DMACR,
+};
+
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
+	const u16		*reg_offset;
 	unsigned int		ifls;
-	unsigned int		lcrh_tx;
-	unsigned int		lcrh_rx;
+	bool			access_32b;
 	bool			oversampling;
 	bool			dma_threshold;
 	bool			cts_event_workaround;
@@ -91,9 +109,8 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
 }
 
 static struct vendor_data vendor_arm = {
+	.reg_offset		= pl011_std_offsets,
 	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
-	.lcrh_tx		= UART011_LCRH,
-	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
 	.dma_threshold		= false,
 	.cts_event_workaround	= false,
@@ -103,6 +120,7 @@ static struct vendor_data vendor_arm = {
 };
 
 static struct vendor_data vendor_sbsa = {
+	.reg_offset		= pl011_std_offsets,
 	.oversampling		= false,
 	.dma_threshold		= false,
 	.cts_event_workaround	= false,
@@ -110,15 +128,41 @@ static struct vendor_data vendor_sbsa = {
 	.fixed_options		= true,
 };
 
+static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
+	[REG_DR] = UART01x_DR,
+	[REG_ST_DMAWM] = ST_UART011_DMAWM,
+	[REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
+	[REG_FR] = UART01x_FR,
+	[REG_LCRH_RX] = ST_UART011_LCRH_RX,
+	[REG_LCRH_TX] = ST_UART011_LCRH_TX,
+	[REG_IBRD] = UART011_IBRD,
+	[REG_FBRD] = UART011_FBRD,
+	[REG_CR] = UART011_CR,
+	[REG_IFLS] = UART011_IFLS,
+	[REG_IMSC] = UART011_IMSC,
+	[REG_RIS] = UART011_RIS,
+	[REG_MIS] = UART011_MIS,
+	[REG_ICR] = UART011_ICR,
+	[REG_DMACR] = UART011_DMACR,
+	[REG_ST_XFCR] = ST_UART011_XFCR,
+	[REG_ST_XON1] = ST_UART011_XON1,
+	[REG_ST_XON2] = ST_UART011_XON2,
+	[REG_ST_XOFF1] = ST_UART011_XOFF1,
+	[REG_ST_XOFF2] = ST_UART011_XOFF2,
+	[REG_ST_ITCR] = ST_UART011_ITCR,
+	[REG_ST_ITIP] = ST_UART011_ITIP,
+	[REG_ST_ABCR] = ST_UART011_ABCR,
+	[REG_ST_ABIMSC] = ST_UART011_ABIMSC,
+};
+
 static unsigned int get_fifosize_st(struct amba_device *dev)
 {
 	return 64;
 }
 
 static struct vendor_data vendor_st = {
+	.reg_offset		= pl011_st_offsets,
 	.ifls			= UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
-	.lcrh_tx		= ST_UART011_LCRH_TX,
-	.lcrh_rx		= ST_UART011_LCRH_RX,
 	.oversampling		= true,
 	.dma_threshold		= true,
 	.cts_event_workaround	= true,
@@ -127,6 +171,29 @@ static struct vendor_data vendor_st = {
 	.get_fifosize		= get_fifosize_st,
 };
 
+static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
+	[REG_DR] = ZX_UART011_DR,
+	[REG_FR] = ZX_UART011_FR,
+	[REG_LCRH_RX] = ZX_UART011_LCRH,
+	[REG_LCRH_TX] = ZX_UART011_LCRH,
+	[REG_IBRD] = ZX_UART011_IBRD,
+	[REG_FBRD] = ZX_UART011_FBRD,
+	[REG_CR] = ZX_UART011_CR,
+	[REG_IFLS] = ZX_UART011_IFLS,
+	[REG_IMSC] = ZX_UART011_IMSC,
+	[REG_RIS] = ZX_UART011_RIS,
+	[REG_MIS] = ZX_UART011_MIS,
+	[REG_ICR] = ZX_UART011_ICR,
+	[REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static struct vendor_data vendor_zte = {
+	.reg_offset		= pl011_zte_offsets,
+	.access_32b		= true,
+	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+	.get_fifosize		= get_fifosize_arm,
+};
+
 /* Deals with DMA transactions */
 
 struct pl011_sgbuf {
@@ -162,14 +229,13 @@ struct pl011_dmatx_data {
  */
 struct uart_amba_port {
 	struct uart_port	port;
+	const u16		*reg_offset;
 	struct clk		*clk;
 	const struct vendor_data *vendor;
 	unsigned int		dmacr;		/* dma control reg */
 	unsigned int		im;		/* interrupt mask */
 	unsigned int		old_status;
 	unsigned int		fifosize;	/* vendor-specific */
-	unsigned int		lcrh_tx;	/* vendor-specific */
-	unsigned int		lcrh_rx;	/* vendor-specific */
 	unsigned int		old_cr;		/* state during shutdown */
 	bool			autorts;
 	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
@@ -184,6 +250,32 @@ struct uart_amba_port {
 #endif
 };
 
+static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
+	unsigned int reg)
+{
+	return uap->reg_offset[reg];
+}
+
+static unsigned int pl011_read(const struct uart_amba_port *uap,
+	unsigned int reg)
+{
+	void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
+
+	return (uap->port.iotype == UPIO_MEM32) ?
+		readl_relaxed(addr) : readw_relaxed(addr);
+}
+
+static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+	unsigned int reg)
+{
+	void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg);
+
+	if (uap->port.iotype == UPIO_MEM32)
+		writel_relaxed(val, addr);
+	else
+		writew_relaxed(val, addr);
+}
+
 /*
  * Reads up to 256 characters from the FIFO or until it's empty and
  * inserts them into the TTY layer. Returns the number of characters
@@ -196,13 +288,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 	int fifotaken = 0;
 
 	while (max_count--) {
-		status = readw(uap->port.membase + UART01x_FR);
+		status = pl011_read(uap, REG_FR);
 		if (status & UART01x_FR_RXFE)
 			break;
 
 		/* Take chars from the FIFO and update status */
-		ch = readw(uap->port.membase + UART01x_DR) |
-			UART_DUMMY_DR_RX;
+		ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX;
 		flag = TTY_NORMAL;
 		uap->port.icount.rx++;
 		fifotaken++;
@@ -284,7 +375,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 	struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev);
 	struct device *dev = uap->port.dev;
 	struct dma_slave_config tx_conf = {
-		.dst_addr = uap->port.mapbase + UART01x_DR,
+		.dst_addr = uap->port.mapbase +
+				 pl011_reg_to_offset(uap, REG_DR),
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 		.direction = DMA_MEM_TO_DEV,
 		.dst_maxburst = uap->fifosize >> 1,
@@ -339,7 +431,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 
 	if (chan) {
 		struct dma_slave_config rx_conf = {
-			.src_addr = uap->port.mapbase + UART01x_DR,
+			.src_addr = uap->port.mapbase +
+				pl011_reg_to_offset(uap, REG_DR),
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 			.direction = DMA_DEV_TO_MEM,
 			.src_maxburst = uap->fifosize >> 2,
@@ -438,7 +531,7 @@ static void pl011_dma_tx_callback(void *data)
 
 	dmacr = uap->dmacr;
 	uap->dmacr = dmacr & ~UART011_TXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 
 	/*
 	 * If TX DMA was disabled, it means that we've stopped the DMA for
@@ -552,7 +645,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 	dma_dev->device_issue_pending(chan);
 
 	uap->dmacr |= UART011_TXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 	uap->dmatx.queued = true;
 
 	/*
@@ -588,9 +681,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
 	 */
 	if (uap->dmatx.queued) {
 		uap->dmacr |= UART011_TXDMAE;
-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+		pl011_write(uap->dmacr, uap, REG_DMACR);
 		uap->im &= ~UART011_TXIM;
-		writew(uap->im, uap->port.membase + UART011_IMSC);
+		pl011_write(uap->im, uap, REG_IMSC);
 		return true;
 	}
 
@@ -600,7 +693,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
 	 */
 	if (pl011_dma_tx_refill(uap) > 0) {
 		uap->im &= ~UART011_TXIM;
-		writew(uap->im, uap->port.membase + UART011_IMSC);
+		pl011_write(uap->im, uap, REG_IMSC);
 		return true;
 	}
 	return false;
@@ -614,7 +707,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
 {
 	if (uap->dmatx.queued) {
 		uap->dmacr &= ~UART011_TXDMAE;
-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+		pl011_write(uap->dmacr, uap, REG_DMACR);
 	}
 }
 
@@ -640,14 +733,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
 		if (!uap->dmatx.queued) {
 			if (pl011_dma_tx_refill(uap) > 0) {
 				uap->im &= ~UART011_TXIM;
-				writew(uap->im, uap->port.membase +
-				       UART011_IMSC);
+				pl011_write(uap->im, uap, REG_IMSC);
 			} else
 				ret = false;
 		} else if (!(uap->dmacr & UART011_TXDMAE)) {
 			uap->dmacr |= UART011_TXDMAE;
-			writew(uap->dmacr,
-				       uap->port.membase + UART011_DMACR);
+			pl011_write(uap->dmacr, uap, REG_DMACR);
 		}
 		return ret;
 	}
@@ -658,9 +749,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
 	 */
 	dmacr = uap->dmacr;
 	uap->dmacr &= ~UART011_TXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 
-	if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) {
+	if (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) {
 		/*
 		 * No space in the FIFO, so enable the transmit interrupt
 		 * so we know when there is space.  Note that once we've
@@ -669,13 +760,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
 		return false;
 	}
 
-	writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+	pl011_write(uap->port.x_char, uap, REG_DR);
 	uap->port.icount.tx++;
 	uap->port.x_char = 0;
 
 	/* Success - restore the DMA state */
 	uap->dmacr = dmacr;
-	writew(dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(dmacr, uap, REG_DMACR);
 
 	return true;
 }
@@ -703,7 +794,7 @@ __acquires(&uap->port.lock)
 			     DMA_TO_DEVICE);
 		uap->dmatx.queued = false;
 		uap->dmacr &= ~UART011_TXDMAE;
-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+		pl011_write(uap->dmacr, uap, REG_DMACR);
 	}
 }
 
@@ -743,11 +834,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
 	dma_async_issue_pending(rxchan);
 
 	uap->dmacr |= UART011_RXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 	uap->dmarx.running = true;
 
 	uap->im &= ~UART011_RXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 
 	return 0;
 }
@@ -805,8 +896,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
 	 */
 	if (dma_count == pending && readfifo) {
 		/* Clear any error flags */
-		writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
-		       uap->port.membase + UART011_ICR);
+		pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+			    UART011_FEIS, uap, REG_ICR);
 
 		/*
 		 * If we read all the DMA'd characters, and we had an
@@ -854,7 +945,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
 
 	/* Disable RX DMA - incoming data will wait in the FIFO */
 	uap->dmacr &= ~UART011_RXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 	uap->dmarx.running = false;
 
 	pending = sgbuf->sg.length - state.residue;
@@ -874,7 +965,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
 			"fall back to interrupt mode\n");
 		uap->im |= UART011_RXIM;
-		writew(uap->im, uap->port.membase + UART011_IMSC);
+		pl011_write(uap->im, uap, REG_IMSC);
 	}
 }
 
@@ -922,7 +1013,7 @@ static void pl011_dma_rx_callback(void *data)
 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
 			"fall back to interrupt mode\n");
 		uap->im |= UART011_RXIM;
-		writew(uap->im, uap->port.membase + UART011_IMSC);
+		pl011_write(uap->im, uap, REG_IMSC);
 	}
 }
 
@@ -935,7 +1026,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
 {
 	/* FIXME.  Just disable the DMA enable */
 	uap->dmacr &= ~UART011_RXDMAE;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 }
 
 /*
@@ -979,7 +1070,7 @@ static void pl011_dma_rx_poll(unsigned long args)
 		spin_lock_irqsave(&uap->port.lock, flags);
 		pl011_dma_rx_stop(uap);
 		uap->im |= UART011_RXIM;
-		writew(uap->im, uap->port.membase + UART011_IMSC);
+		pl011_write(uap->im, uap, REG_IMSC);
 		spin_unlock_irqrestore(&uap->port.lock, flags);
 
 		uap->dmarx.running = false;
@@ -1041,7 +1132,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 skip_rx:
 	/* Turn on DMA error (RX/TX will be enabled on demand) */
 	uap->dmacr |= UART011_DMAONERR;
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 
 	/*
 	 * ST Micro variants has some specific dma burst threshold
@@ -1049,8 +1140,8 @@ skip_rx:
 	 * be issued above/below 16 bytes.
 	 */
 	if (uap->vendor->dma_threshold)
-		writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
-			       uap->port.membase + ST_UART011_DMAWM);
+		pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+			    uap, REG_ST_DMAWM);
 
 	if (uap->using_rx_dma) {
 		if (pl011_dma_rx_trigger_dma(uap))
@@ -1075,12 +1166,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 		return;
 
 	/* Disable RX and TX DMA */
-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+	while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
 		barrier();
 
 	spin_lock_irq(&uap->port.lock);
 	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	pl011_write(uap->dmacr, uap, REG_DMACR);
 	spin_unlock_irq(&uap->port.lock);
 
 	if (uap->using_tx_dma) {
@@ -1181,7 +1272,7 @@ static void pl011_stop_tx(struct uart_port *port)
 	    container_of(port, struct uart_amba_port, port);
 
 	uap->im &= ~UART011_TXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 	pl011_dma_tx_stop(uap);
 }
 
@@ -1191,7 +1282,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
 static void pl011_start_tx_pio(struct uart_amba_port *uap)
 {
 	uap->im |= UART011_TXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 	pl011_tx_chars(uap, false);
 }
 
@@ -1211,7 +1302,7 @@ static void pl011_stop_rx(struct uart_port *port)
 
 	uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
 		     UART011_PEIM|UART011_BEIM|UART011_OEIM);
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 
 	pl011_dma_rx_stop(uap);
 }
@@ -1222,7 +1313,7 @@ static void pl011_enable_ms(struct uart_port *port)
 	    container_of(port, struct uart_amba_port, port);
 
 	uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 }
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
@@ -1242,7 +1333,7 @@ __acquires(&uap->port.lock)
 			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
 				"fall back to interrupt mode again\n");
 			uap->im |= UART011_RXIM;
-			writew(uap->im, uap->port.membase + UART011_IMSC);
+			pl011_write(uap->im, uap, REG_IMSC);
 		} else {
 #ifdef CONFIG_DMA_ENGINE
 			/* Start Rx DMA poll */
@@ -1263,10 +1354,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
 			  bool from_irq)
 {
 	if (unlikely(!from_irq) &&
-	    readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+	    pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
 		return false; /* unable to transmit character */
 
-	writew(c, uap->port.membase + UART01x_DR);
+	pl011_write(c, uap, REG_DR);
 	uap->port.icount.tx++;
 
 	return true;
@@ -1313,7 +1404,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 {
 	unsigned int status, delta;
 
-	status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+	status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY;
 
 	delta = status ^ uap->old_status;
 	uap->old_status = status;
@@ -1341,15 +1432,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 		return;
 
 	/* workaround to make sure that all bits are unlocked.. */
-	writew(0x00, uap->port.membase + UART011_ICR);
+	pl011_write(0x00, uap, REG_ICR);
 
 	/*
 	 * WA: introduce 26ns(1 uart clk) delay before W1C;
 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
 	 * so add 2 dummy reads
 	 */
-	dummy_read = readw(uap->port.membase + UART011_ICR);
-	dummy_read = readw(uap->port.membase + UART011_ICR);
+	dummy_read = pl011_read(uap, REG_ICR);
+	dummy_read = pl011_read(uap, REG_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1361,15 +1452,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	int handled = 0;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	imsc = readw(uap->port.membase + UART011_IMSC);
-	status = readw(uap->port.membase + UART011_RIS) & imsc;
+	imsc = pl011_read(uap, REG_IMSC);
+	status = pl011_read(uap, REG_RIS) & imsc;
 	if (status) {
 		do {
 			check_apply_cts_event_workaround(uap);
 
-			writew(status & ~(UART011_TXIS|UART011_RTIS|
-					  UART011_RXIS),
-			       uap->port.membase + UART011_ICR);
+			pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
+					       UART011_RXIS),
+				    uap, REG_ICR);
 
 			if (status & (UART011_RTIS|UART011_RXIS)) {
 				if (pl011_dma_rx_running(uap))
@@ -1386,7 +1477,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (pass_counter-- == 0)
 				break;
 
-			status = readw(uap->port.membase + UART011_RIS) & imsc;
+			status = pl011_read(uap, REG_RIS) & imsc;
 		} while (status != 0);
 		handled = 1;
 	}
@@ -1400,7 +1491,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
-	unsigned int status = readw(uap->port.membase + UART01x_FR);
+	unsigned int status = pl011_read(uap, REG_FR);
 	return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
 }
 
@@ -1409,7 +1500,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 	unsigned int result = 0;
-	unsigned int status = readw(uap->port.membase + UART01x_FR);
+	unsigned int status = pl011_read(uap, REG_FR);
 
 #define TIOCMBIT(uartbit, tiocmbit)	\
 	if (status & uartbit)		\
@@ -1429,7 +1520,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	    container_of(port, struct uart_amba_port, port);
 	unsigned int cr;
 
-	cr = readw(uap->port.membase + UART011_CR);
+	cr = pl011_read(uap, REG_CR);
 
 #define	TIOCMBIT(tiocmbit, uartbit)		\
 	if (mctrl & tiocmbit)		\
@@ -1449,7 +1540,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	}
 #undef TIOCMBIT
 
-	writew(cr, uap->port.membase + UART011_CR);
+	pl011_write(cr, uap, REG_CR);
 }
 
 static void pl011_break_ctl(struct uart_port *port, int break_state)
@@ -1460,12 +1551,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
 	unsigned int lcr_h;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+	lcr_h = pl011_read(uap, REG_LCRH_TX);
 	if (break_state == -1)
 		lcr_h |= UART01x_LCRH_BRK;
 	else
 		lcr_h &= ~UART01x_LCRH_BRK;
-	writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+	pl011_write(lcr_h, uap, REG_LCRH_TX);
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
@@ -1475,9 +1566,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
 {
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
-	unsigned char __iomem *regs = uap->port.membase;
 
-	writew(readw(regs + UART011_MIS), regs + UART011_ICR);
+	pl011_write(pl011_read(uap, REG_MIS), uap, REG_ICR);
 	/*
 	 * There is no way to clear TXIM as this is "ready to transmit IRQ", so
 	 * we simply mask it. start_tx() will unmask it.
@@ -1491,7 +1581,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
 	 * (including tx queue), so we're also fine with start_tx()'s caller
 	 * side.
 	 */
-	writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC);
+	pl011_write(pl011_read(uap, REG_IMSC) & ~UART011_TXIM, uap,
+		    REG_IMSC);
 }
 
 static int pl011_get_poll_char(struct uart_port *port)
@@ -1506,11 +1597,11 @@ static int pl011_get_poll_char(struct uart_port *port)
 	 */
 	pl011_quiesce_irqs(port);
 
-	status = readw(uap->port.membase + UART01x_FR);
+	status = pl011_read(uap, REG_FR);
 	if (status & UART01x_FR_RXFE)
 		return NO_POLL_CHAR;
 
-	return readw(uap->port.membase + UART01x_DR);
+	return pl011_read(uap, REG_DR);
 }
 
 static void pl011_put_poll_char(struct uart_port *port,
@@ -1519,10 +1610,10 @@ static void pl011_put_poll_char(struct uart_port *port,
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+	while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
 		barrier();
 
-	writew(ch, uap->port.membase + UART01x_DR);
+	pl011_write(ch, uap, REG_DR);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -1546,15 +1637,16 @@ static int pl011_hwinit(struct uart_port *port)
 	uap->port.uartclk = clk_get_rate(uap->clk);
 
 	/* Clear pending error and receive interrupts */
-	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
-	       UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+		    UART011_FEIS | UART011_RTIS | UART011_RXIS,
+		    uap, REG_ICR);
 
 	/*
 	 * Save interrupts enable mask, and enable RX interrupts in case if
 	 * the interrupt is used for NMI entry.
 	 */
-	uap->im = readw(uap->port.membase + UART011_IMSC);
-	writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
+	uap->im = pl011_read(uap, REG_IMSC);
+	pl011_write(UART011_RTIM | UART011_RXIM, uap, REG_IMSC);
 
 	if (dev_get_platdata(uap->port.dev)) {
 		struct amba_pl011_data *plat;
@@ -1566,24 +1658,30 @@ static int pl011_hwinit(struct uart_port *port)
 	return 0;
 }
 
+static bool pl011_split_lcrh(const struct uart_amba_port *uap)
+{
+	return pl011_reg_to_offset(uap, REG_LCRH_RX) !=
+	       pl011_reg_to_offset(uap, REG_LCRH_TX);
+}
+
 static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
 {
-	writew(lcr_h, uap->port.membase + uap->lcrh_rx);
-	if (uap->lcrh_rx != uap->lcrh_tx) {
+	pl011_write(lcr_h, uap, REG_LCRH_RX);
+	if (pl011_split_lcrh(uap)) {
 		int i;
 		/*
 		 * Wait 10 PCLKs before writing LCRH_TX register,
 		 * to get this delay write read only register 10 times
 		 */
 		for (i = 0; i < 10; ++i)
-			writew(0xff, uap->port.membase + UART011_MIS);
-		writew(lcr_h, uap->port.membase + uap->lcrh_tx);
+			pl011_write(0xff, uap, REG_MIS);
+		pl011_write(lcr_h, uap, REG_LCRH_TX);
 	}
 }
 
 static int pl011_allocate_irq(struct uart_amba_port *uap)
 {
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 
 	return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
 }
@@ -1598,12 +1696,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
 	spin_lock_irq(&uap->port.lock);
 
 	/* Clear out any spuriously appearing RX interrupts */
-	writew(UART011_RTIS | UART011_RXIS,
-	       uap->port.membase + UART011_ICR);
+	pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
 	uap->im = UART011_RTIM;
 	if (!pl011_dma_rx_running(uap))
 		uap->im |= UART011_RXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_write(uap->im, uap, REG_IMSC);
 	spin_unlock_irq(&uap->port.lock);
 }
 
@@ -1622,21 +1719,21 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
+	pl011_write(uap->vendor->ifls, uap, REG_IFLS);
 
 	spin_lock_irq(&uap->port.lock);
 
 	/* restore RTS and DTR */
 	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
-	writew(cr, uap->port.membase + UART011_CR);
+	pl011_write(cr, uap, REG_CR);
 
 	spin_unlock_irq(&uap->port.lock);
 
 	/*
 	 * initialise the old status of the modem signals
 	 */
-	uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+	uap->old_status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY;
 
 	/* Startup DMA */
 	pl011_dma_startup(uap);
@@ -1677,9 +1774,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
 {
       unsigned long val;
 
-      val = readw(uap->port.membase + lcrh);
+      val = pl011_read(uap, lcrh);
       val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
-      writew(val, uap->port.membase + lcrh);
+      pl011_write(val, uap, lcrh);
 }
 
 /*
@@ -1693,19 +1790,19 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
 
 	uap->autorts = false;
 	spin_lock_irq(&uap->port.lock);
-	cr = readw(uap->port.membase + UART011_CR);
+	cr = pl011_read(uap, REG_CR);
 	uap->old_cr = cr;
 	cr &= UART011_CR_RTS | UART011_CR_DTR;
 	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
-	writew(cr, uap->port.membase + UART011_CR);
+	pl011_write(cr, uap, REG_CR);
 	spin_unlock_irq(&uap->port.lock);
 
 	/*
 	 * disable break condition and fifos
 	 */
-	pl011_shutdown_channel(uap, uap->lcrh_rx);
-	if (uap->lcrh_rx != uap->lcrh_tx)
-		pl011_shutdown_channel(uap, uap->lcrh_tx);
+	pl011_shutdown_channel(uap, REG_LCRH_RX);
+	if (pl011_split_lcrh(uap))
+		pl011_shutdown_channel(uap, REG_LCRH_TX);
 }
 
 static void pl011_disable_interrupts(struct uart_amba_port *uap)
@@ -1714,8 +1811,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
 
 	/* mask all interrupts and clear all pending ones */
 	uap->im = 0;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
-	writew(0xffff, uap->port.membase + UART011_ICR);
+	pl011_write(uap->im, uap, REG_IMSC);
+	pl011_write(0xffff, uap, REG_ICR);
 
 	spin_unlock_irq(&uap->port.lock);
 }
@@ -1867,8 +1964,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		pl011_enable_ms(port);
 
 	/* first, disable everything */
-	old_cr = readw(port->membase + UART011_CR);
-	writew(0, port->membase + UART011_CR);
+	old_cr = pl011_read(uap, REG_CR);
+	pl011_write(0, uap, REG_CR);
 
 	if (termios->c_cflag & CRTSCTS) {
 		if (old_cr & UART011_CR_RTS)
@@ -1901,17 +1998,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 			quot -= 2;
 	}
 	/* Set baud rate */
-	writew(quot & 0x3f, port->membase + UART011_FBRD);
-	writew(quot >> 6, port->membase + UART011_IBRD);
+	pl011_write(quot & 0x3f, uap, REG_FBRD);
+	pl011_write(quot >> 6, uap, REG_IBRD);
 
 	/*
 	 * ----------v----------v----------v----------v-----
-	 * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
-	 * UART011_FBRD & UART011_IBRD.
+	 * NOTE: REG_LCRH_TX and REG_LCRH_RX MUST BE WRITTEN AFTER
+	 * REG_FBRD & REG_IBRD.
 	 * ----------^----------^----------^----------^-----
 	 */
 	pl011_write_lcr_h(uap, lcr_h);
-	writew(old_cr, port->membase + UART011_CR);
+	pl011_write(old_cr, uap, REG_CR);
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -2052,9 +2149,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+	while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
 		barrier();
-	writew(ch, uap->port.membase + UART01x_DR);
+	pl011_write(ch, uap, REG_DR);
 }
 
 static void
@@ -2079,10 +2176,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	 *	First save the CR then disable the interrupts
 	 */
 	if (!uap->vendor->always_enabled) {
-		old_cr = readw(uap->port.membase + UART011_CR);
+		old_cr = pl011_read(uap, REG_CR);
 		new_cr = old_cr & ~UART011_CR_CTSEN;
 		new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
-		writew(new_cr, uap->port.membase + UART011_CR);
+		pl011_write(new_cr, uap, REG_CR);
 	}
 
 	uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2092,10 +2189,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the TCR
 	 */
 	do {
-		status = readw(uap->port.membase + UART01x_FR);
+		status = pl011_read(uap, REG_FR);
 	} while (status & UART01x_FR_BUSY);
 	if (!uap->vendor->always_enabled)
-		writew(old_cr, uap->port.membase + UART011_CR);
+		pl011_write(old_cr, uap, REG_CR);
 
 	if (locked)
 		spin_unlock(&uap->port.lock);
@@ -2108,10 +2205,10 @@ static void __init
 pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 			     int *parity, int *bits)
 {
-	if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
+	if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
 		unsigned int lcr_h, ibrd, fbrd;
 
-		lcr_h = readw(uap->port.membase + uap->lcrh_tx);
+		lcr_h = pl011_read(uap, REG_LCRH_TX);
 
 		*parity = 'n';
 		if (lcr_h & UART01x_LCRH_PEN) {
@@ -2126,13 +2223,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 		else
 			*bits = 8;
 
-		ibrd = readw(uap->port.membase + UART011_IBRD);
-		fbrd = readw(uap->port.membase + UART011_FBRD);
+		ibrd = pl011_read(uap, REG_IBRD);
+		fbrd = pl011_read(uap, REG_FBRD);
 
 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
 
 		if (uap->vendor->oversampling) {
-			if (readw(uap->port.membase + UART011_CR)
+			if (pl011_read(uap, REG_CR)
 				  & ST_UART011_CR_OVSFACT)
 				*baud *= 2;
 		}
@@ -2206,7 +2303,10 @@ static void pl011_putc(struct uart_port *port, int c)
 {
 	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
 		;
-	writeb(c, port->membase + UART01x_DR);
+	if (port->iotype == UPIO_MEM32)
+		writel(c, port->membase + UART01x_DR);
+	else
+		writeb(c, port->membase + UART01x_DR);
 	while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
 		;
 }
@@ -2319,7 +2419,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	uap->port.dev = dev;
 	uap->port.mapbase = mmiobase->start;
 	uap->port.membase = base;
-	uap->port.iotype = UPIO_MEM;
 	uap->port.fifosize = uap->fifosize;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = index;
@@ -2334,8 +2433,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
 	int ret;
 
 	/* Ensure interrupts from this UART are masked and cleared */
-	writew(0, uap->port.membase + UART011_IMSC);
-	writew(0xffff, uap->port.membase + UART011_ICR);
+	pl011_write(0, uap, REG_IMSC);
+	pl011_write(0xffff, uap, REG_ICR);
 
 	if (!amba_reg.state) {
 		ret = uart_register_driver(&amba_reg);
@@ -2372,10 +2471,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (IS_ERR(uap->clk))
 		return PTR_ERR(uap->clk);
 
+	uap->reg_offset = vendor->reg_offset;
 	uap->vendor = vendor;
-	uap->lcrh_rx = vendor->lcrh_rx;
-	uap->lcrh_tx = vendor->lcrh_tx;
 	uap->fifosize = vendor->get_fifosize(dev);
+	uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
 	uap->port.irq = dev->irq[0];
 	uap->port.ops = &amba_pl011_pops;
 
@@ -2453,8 +2552,10 @@ static int sbsa_uart_probe(struct platform_device *pdev)
 	if (!uap)
 		return -ENOMEM;
 
+	uap->reg_offset	= vendor_sbsa.reg_offset;
 	uap->vendor	= &vendor_sbsa;
 	uap->fifosize	= 32;
+	uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
 	uap->port.irq	= platform_get_irq(pdev, 0);
 	uap->port.ops	= &sbsa_uart_pops;
 	uap->fixed_baud = baudrate;