summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/mpc52xx_uart.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/tty/serial/mpc52xx_uart.c
Initial import
Diffstat (limited to 'drivers/tty/serial/mpc52xx_uart.c')
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c1958
1 files changed, 1958 insertions, 0 deletions
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
new file mode 100644
index 000000000..1589f17c1
--- /dev/null
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -0,0 +1,1958 @@
+/*
+ * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
+ *
+ * FIXME According to the usermanual the status bits in the status register
+ * are only updated when the peripherals access the FIFO and not when the
+ * CPU access them. So since we use this bits to know when we stop writing
+ * and reading, they may not be updated in-time and a race condition may
+ * exists. But I haven't be able to prove this and I don't care. But if
+ * any problem arises, it might worth checking. The TX/RX FIFO Stats
+ * registers should be used in addition.
+ * Update: Actually, they seem updated ... At least the bits we use.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Some of the code has been inspired/copied from the 2.4 code written
+ * by Dale Farnsworth <dfarnsworth@mvista.com>.
+ *
+ * Copyright (C) 2008 Freescale Semiconductor Inc.
+ * John Rigby <jrigby@gmail.com>
+ * Added support for MPC5121
+ * Copyright (C) 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#undef DEBUG
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+
+#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_PSC_MAJOR 204
+#define SERIAL_PSC_MINOR 148
+
+
+#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
+
+
+static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
+ /* Rem: - We use the read_status_mask as a shadow of
+ * psc->mpc52xx_psc_imr
+ * - It's important that is array is all zero on start as we
+ * use it to know if it's initialized or not ! If it's not sure
+ * it's cleared, then a memset(...,0,...) should be added to
+ * the console_init
+ */
+
+/* lookup table for matching device nodes to index numbers */
+static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
+
+static void mpc52xx_uart_of_enumerate(void);
+
+
+#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+
+
+/* Forward declaration of the interruption handling routine */
+static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
+static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
+
+/* ======================================================================== */
+/* PSC fifo operations for isolating differences between 52xx and 512x */
+/* ======================================================================== */
+
+struct psc_ops {
+ void (*fifo_init)(struct uart_port *port);
+ int (*raw_rx_rdy)(struct uart_port *port);
+ int (*raw_tx_rdy)(struct uart_port *port);
+ int (*rx_rdy)(struct uart_port *port);
+ int (*tx_rdy)(struct uart_port *port);
+ int (*tx_empty)(struct uart_port *port);
+ void (*stop_rx)(struct uart_port *port);
+ void (*start_tx)(struct uart_port *port);
+ void (*stop_tx)(struct uart_port *port);
+ void (*rx_clr_irq)(struct uart_port *port);
+ void (*tx_clr_irq)(struct uart_port *port);
+ void (*write_char)(struct uart_port *port, unsigned char c);
+ unsigned char (*read_char)(struct uart_port *port);
+ void (*cw_disable_ints)(struct uart_port *port);
+ void (*cw_restore_ints)(struct uart_port *port);
+ unsigned int (*set_baudrate)(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old);
+ int (*clock_alloc)(struct uart_port *port);
+ void (*clock_relse)(struct uart_port *port);
+ int (*clock)(struct uart_port *port, int enable);
+ int (*fifoc_init)(void);
+ void (*fifoc_uninit)(void);
+ void (*get_irq)(struct uart_port *, struct device_node *);
+ irqreturn_t (*handle_irq)(struct uart_port *port);
+ u16 (*get_status)(struct uart_port *port);
+ u8 (*get_ipcr)(struct uart_port *port);
+ void (*command)(struct uart_port *port, u8 cmd);
+ void (*set_mode)(struct uart_port *port, u8 mr1, u8 mr2);
+ void (*set_rts)(struct uart_port *port, int state);
+ void (*enable_ms)(struct uart_port *port);
+ void (*set_sicr)(struct uart_port *port, u32 val);
+ void (*set_imr)(struct uart_port *port, u16 val);
+ u8 (*get_mr1)(struct uart_port *port);
+};
+
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+ u16 prescaler, unsigned int divisor)
+{
+ /* select prescaler */
+ out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+ out_8(&psc->ctur, divisor >> 8);
+ out_8(&psc->ctlr, divisor & 0xff);
+}
+
+static u16 mpc52xx_psc_get_status(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status);
+}
+
+static u8 mpc52xx_psc_get_ipcr(struct uart_port *port)
+{
+ return in_8(&PSC(port)->mpc52xx_psc_ipcr);
+}
+
+static void mpc52xx_psc_command(struct uart_port *port, u8 cmd)
+{
+ out_8(&PSC(port)->command, cmd);
+}
+
+static void mpc52xx_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2)
+{
+ out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&PSC(port)->mode, mr1);
+ out_8(&PSC(port)->mode, mr2);
+}
+
+static void mpc52xx_psc_set_rts(struct uart_port *port, int state)
+{
+ if (state)
+ out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+ else
+ out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
+}
+
+static void mpc52xx_psc_enable_ms(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+
+ /* clear D_*-bits by reading them */
+ in_8(&psc->mpc52xx_psc_ipcr);
+ /* enable CTS and DCD as IPC interrupts */
+ out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_set_sicr(struct uart_port *port, u32 val)
+{
+ out_be32(&PSC(port)->sicr, val);
+}
+
+static void mpc52xx_psc_set_imr(struct uart_port *port, u16 val)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, val);
+}
+
+static u8 mpc52xx_psc_get_mr1(struct uart_port *port)
+{
+ out_8(&PSC(port)->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ return in_8(&PSC(port)->mode);
+}
+
+#ifdef CONFIG_PPC_MPC52xx
+#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
+static void mpc52xx_psc_fifo_init(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
+
+ out_8(&fifo->rfcntl, 0x00);
+ out_be16(&fifo->rfalarm, 0x1ff);
+ out_8(&fifo->tfcntl, 0x07);
+ out_be16(&fifo->tfalarm, 0x80);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_RXRDY;
+}
+
+static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_TXRDY;
+}
+
+
+static int mpc52xx_psc_rx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_isr)
+ & port->read_status_mask
+ & MPC52xx_PSC_IMR_RXRDY;
+}
+
+static int mpc52xx_psc_tx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_isr)
+ & port->read_status_mask
+ & MPC52xx_PSC_IMR_TXRDY;
+}
+
+static int mpc52xx_psc_tx_empty(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_TXEMP;
+}
+
+static void mpc52xx_psc_start_tx(struct uart_port *port)
+{
+ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_stop_tx(struct uart_port *port)
+{
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_stop_rx(struct uart_port *port)
+{
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_rx_clr_irq(struct uart_port *port)
+{
+}
+
+static void mpc52xx_psc_tx_clr_irq(struct uart_port *port)
+{
+}
+
+static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c)
+{
+ out_8(&PSC(port)->mpc52xx_psc_buffer_8, c);
+}
+
+static unsigned char mpc52xx_psc_read_char(struct uart_port *port)
+{
+ return in_8(&PSC(port)->mpc52xx_psc_buffer_8);
+}
+
+static void mpc52xx_psc_cw_disable_ints(struct uart_port *port)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, 0);
+}
+
+static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+
+ /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 32);
+ divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+ /* enable the /32 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+ u16 prescaler;
+
+ /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+ * ipb freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (32 * 0xffff) + 1,
+ port->uartclk / 4);
+ divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+ /* select the proper prescaler and set the divisor
+ * prefer high prescaler for more tolerance on low baudrates */
+ if (divisor > 0xffff || baud <= 115200) {
+ divisor = (divisor + 4) / 8;
+ prescaler = 0xdd00; /* /32 */
+ } else
+ prescaler = 0xff00; /* /4 */
+ mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+ return baud;
+}
+
+static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+ port->irqflags = 0;
+ port->irq = irq_of_parse_and_map(np, 0);
+}
+
+/* 52xx specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port)
+{
+ return mpc5xxx_uart_process_int(port);
+}
+
+static struct psc_ops mpc52xx_psc_ops = {
+ .fifo_init = mpc52xx_psc_fifo_init,
+ .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+ .rx_rdy = mpc52xx_psc_rx_rdy,
+ .tx_rdy = mpc52xx_psc_tx_rdy,
+ .tx_empty = mpc52xx_psc_tx_empty,
+ .stop_rx = mpc52xx_psc_stop_rx,
+ .start_tx = mpc52xx_psc_start_tx,
+ .stop_tx = mpc52xx_psc_stop_tx,
+ .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+ .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+ .write_char = mpc52xx_psc_write_char,
+ .read_char = mpc52xx_psc_read_char,
+ .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+ .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+ .set_baudrate = mpc5200_psc_set_baudrate,
+ .get_irq = mpc52xx_psc_get_irq,
+ .handle_irq = mpc52xx_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+ .fifo_init = mpc52xx_psc_fifo_init,
+ .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+ .rx_rdy = mpc52xx_psc_rx_rdy,
+ .tx_rdy = mpc52xx_psc_tx_rdy,
+ .tx_empty = mpc52xx_psc_tx_empty,
+ .stop_rx = mpc52xx_psc_stop_rx,
+ .start_tx = mpc52xx_psc_start_tx,
+ .stop_tx = mpc52xx_psc_stop_tx,
+ .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+ .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+ .write_char = mpc52xx_psc_write_char,
+ .read_char = mpc52xx_psc_read_char,
+ .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+ .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+ .set_baudrate = mpc5200b_psc_set_baudrate,
+ .get_irq = mpc52xx_psc_get_irq,
+ .handle_irq = mpc52xx_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
+};
+
+#endif /* CONFIG_MPC52xx */
+
+#ifdef CONFIG_PPC_MPC512x
+#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
+
+/* PSC FIFO Controller for mpc512x */
+struct psc_fifoc {
+ u32 fifoc_cmd;
+ u32 fifoc_int;
+ u32 fifoc_dma;
+ u32 fifoc_axe;
+ u32 fifoc_debug;
+};
+
+static struct psc_fifoc __iomem *psc_fifoc;
+static unsigned int psc_fifoc_irq;
+static struct clk *psc_fifoc_clk;
+
+static void mpc512x_psc_fifo_init(struct uart_port *port)
+{
+ /* /32 prescaler */
+ out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00);
+
+ out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_512x(port)->txalarm, 1);
+ out_be32(&FIFO_512x(port)->tximr, 0);
+
+ out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_512x(port)->rxalarm, 1);
+ out_be32(&FIFO_512x(port)->rximr, 0);
+
+ out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM);
+ out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM);
+}
+
+static int mpc512x_psc_raw_rx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
+}
+
+static int mpc512x_psc_raw_tx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL);
+}
+
+static int mpc512x_psc_rx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->rxsr)
+ & in_be32(&FIFO_512x(port)->rximr)
+ & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc512x_psc_tx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->txsr)
+ & in_be32(&FIFO_512x(port)->tximr)
+ & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc512x_psc_tx_empty(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->txsr)
+ & MPC512x_PSC_FIFO_EMPTY;
+}
+
+static void mpc512x_psc_stop_rx(struct uart_port *port)
+{
+ unsigned long rx_fifo_imr;
+
+ rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr);
+ rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr);
+}
+
+static void mpc512x_psc_start_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
+ tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc512x_psc_stop_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
+ tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc512x_psc_rx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr));
+}
+
+static void mpc512x_psc_tx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr));
+}
+
+static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c)
+{
+ out_8(&FIFO_512x(port)->txdata_8, c);
+}
+
+static unsigned char mpc512x_psc_read_char(struct uart_port *port)
+{
+ return in_8(&FIFO_512x(port)->rxdata_8);
+}
+
+static void mpc512x_psc_cw_disable_ints(struct uart_port *port)
+{
+ port->read_status_mask =
+ in_be32(&FIFO_512x(port)->tximr) << 16 |
+ in_be32(&FIFO_512x(port)->rximr);
+ out_be32(&FIFO_512x(port)->tximr, 0);
+ out_be32(&FIFO_512x(port)->rximr, 0);
+}
+
+static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->tximr,
+ (port->read_status_mask >> 16) & 0x7f);
+ out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
+}
+
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+
+ /*
+ * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+ * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+ * Furthermore, it states that "After reset, the prescaler by 10
+ * for the UART mode is selected", but the reset register value is
+ * 0x0000 which means a /32 prescaler. This is wrong.
+ *
+ * In reality using /32 prescaler doesn't work, as it is not supported!
+ * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+ * Chapter 4.1 PSC in UART Mode.
+ * Calculate with a /16 prescaler here.
+ */
+
+ /* uartclk contains the ips freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (16 * 0xffff) + 1,
+ port->uartclk / 16);
+ divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+ /* enable the /16 prescaler and set the divisor */
+ mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+ return baud;
+}
+
+/* Init PSC FIFO Controller */
+static int __init mpc512x_psc_fifoc_init(void)
+{
+ int err;
+ struct device_node *np;
+ struct clk *clk;
+
+ /* default error code, potentially overwritten by clock calls */
+ err = -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-psc-fifo");
+ if (!np) {
+ pr_err("%s: Can't find FIFOC node\n", __func__);
+ goto out_err;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ /* backwards compat with device trees that lack clock specs */
+ clk = clk_get_sys(np->name, "ipg");
+ }
+ if (IS_ERR(clk)) {
+ pr_err("%s: Can't lookup FIFO clock\n", __func__);
+ err = PTR_ERR(clk);
+ goto out_ofnode_put;
+ }
+ if (clk_prepare_enable(clk)) {
+ pr_err("%s: Can't enable FIFO clock\n", __func__);
+ clk_put(clk);
+ goto out_ofnode_put;
+ }
+ psc_fifoc_clk = clk;
+
+ psc_fifoc = of_iomap(np, 0);
+ if (!psc_fifoc) {
+ pr_err("%s: Can't map FIFOC\n", __func__);
+ goto out_clk_disable;
+ }
+
+ psc_fifoc_irq = irq_of_parse_and_map(np, 0);
+ if (psc_fifoc_irq == 0) {
+ pr_err("%s: Can't get FIFOC irq\n", __func__);
+ goto out_unmap;
+ }
+
+ of_node_put(np);
+ return 0;
+
+out_unmap:
+ iounmap(psc_fifoc);
+out_clk_disable:
+ clk_disable_unprepare(psc_fifoc_clk);
+ clk_put(psc_fifoc_clk);
+out_ofnode_put:
+ of_node_put(np);
+out_err:
+ return err;
+}
+
+static void __exit mpc512x_psc_fifoc_uninit(void)
+{
+ iounmap(psc_fifoc);
+
+ /* disable the clock, errors are not fatal */
+ if (psc_fifoc_clk) {
+ clk_disable_unprepare(psc_fifoc_clk);
+ clk_put(psc_fifoc_clk);
+ psc_fifoc_clk = NULL;
+ }
+}
+
+/* 512x specific interrupt handler. The caller holds the port lock */
+static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port)
+{
+ unsigned long fifoc_int;
+ int psc_num;
+
+ /* Read pending PSC FIFOC interrupts */
+ fifoc_int = in_be32(&psc_fifoc->fifoc_int);
+
+ /* Check if it is an interrupt for this port */
+ psc_num = (port->mapbase & 0xf00) >> 8;
+ if (test_bit(psc_num, &fifoc_int) ||
+ test_bit(psc_num + 16, &fifoc_int))
+ return mpc5xxx_uart_process_int(port);
+
+ return IRQ_NONE;
+}
+
+static struct clk *psc_mclk_clk[MPC52xx_PSC_MAXNUM];
+static struct clk *psc_ipg_clk[MPC52xx_PSC_MAXNUM];
+
+/* called from within the .request_port() callback (allocation) */
+static int mpc512x_psc_alloc_clock(struct uart_port *port)
+{
+ int psc_num;
+ struct clk *clk;
+ int err;
+
+ psc_num = (port->mapbase & 0xf00) >> 8;
+
+ clk = devm_clk_get(port->dev, "mclk");
+ if (IS_ERR(clk)) {
+ dev_err(port->dev, "Failed to get MCLK!\n");
+ err = PTR_ERR(clk);
+ goto out_err;
+ }
+ err = clk_prepare_enable(clk);
+ if (err) {
+ dev_err(port->dev, "Failed to enable MCLK!\n");
+ goto out_err;
+ }
+ psc_mclk_clk[psc_num] = clk;
+
+ clk = devm_clk_get(port->dev, "ipg");
+ if (IS_ERR(clk)) {
+ dev_err(port->dev, "Failed to get IPG clock!\n");
+ err = PTR_ERR(clk);
+ goto out_err;
+ }
+ err = clk_prepare_enable(clk);
+ if (err) {
+ dev_err(port->dev, "Failed to enable IPG clock!\n");
+ goto out_err;
+ }
+ psc_ipg_clk[psc_num] = clk;
+
+ return 0;
+
+out_err:
+ if (psc_mclk_clk[psc_num]) {
+ clk_disable_unprepare(psc_mclk_clk[psc_num]);
+ psc_mclk_clk[psc_num] = NULL;
+ }
+ if (psc_ipg_clk[psc_num]) {
+ clk_disable_unprepare(psc_ipg_clk[psc_num]);
+ psc_ipg_clk[psc_num] = NULL;
+ }
+ return err;
+}
+
+/* called from within the .release_port() callback (release) */
+static void mpc512x_psc_relse_clock(struct uart_port *port)
+{
+ int psc_num;
+ struct clk *clk;
+
+ psc_num = (port->mapbase & 0xf00) >> 8;
+ clk = psc_mclk_clk[psc_num];
+ if (clk) {
+ clk_disable_unprepare(clk);
+ psc_mclk_clk[psc_num] = NULL;
+ }
+ if (psc_ipg_clk[psc_num]) {
+ clk_disable_unprepare(psc_ipg_clk[psc_num]);
+ psc_ipg_clk[psc_num] = NULL;
+ }
+}
+
+/* implementation of the .clock() callback (enable/disable) */
+static int mpc512x_psc_endis_clock(struct uart_port *port, int enable)
+{
+ int psc_num;
+ struct clk *psc_clk;
+ int ret;
+
+ if (uart_console(port))
+ return 0;
+
+ psc_num = (port->mapbase & 0xf00) >> 8;
+ psc_clk = psc_mclk_clk[psc_num];
+ if (!psc_clk) {
+ dev_err(port->dev, "Failed to get PSC clock entry!\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(port->dev, "mclk %sable\n", enable ? "en" : "dis");
+ if (enable) {
+ ret = clk_enable(psc_clk);
+ if (ret)
+ dev_err(port->dev, "Failed to enable MCLK!\n");
+ return ret;
+ } else {
+ clk_disable(psc_clk);
+ return 0;
+ }
+}
+
+static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np)
+{
+ port->irqflags = IRQF_SHARED;
+ port->irq = psc_fifoc_irq;
+}
+#endif
+
+#ifdef CONFIG_PPC_MPC512x
+
+#define PSC_5125(port) ((struct mpc5125_psc __iomem *)((port)->membase))
+#define FIFO_5125(port) ((struct mpc512x_psc_fifo __iomem *)(PSC_5125(port)+1))
+
+static void mpc5125_psc_fifo_init(struct uart_port *port)
+{
+ /* /32 prescaler */
+ out_8(&PSC_5125(port)->mpc52xx_psc_clock_select, 0xdd);
+
+ out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_5125(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_5125(port)->txalarm, 1);
+ out_be32(&FIFO_5125(port)->tximr, 0);
+
+ out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_5125(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_5125(port)->rxalarm, 1);
+ out_be32(&FIFO_5125(port)->rximr, 0);
+
+ out_be32(&FIFO_5125(port)->tximr, MPC512x_PSC_FIFO_ALARM);
+ out_be32(&FIFO_5125(port)->rximr, MPC512x_PSC_FIFO_ALARM);
+}
+
+static int mpc5125_psc_raw_rx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_5125(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
+}
+
+static int mpc5125_psc_raw_tx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_FULL);
+}
+
+static int mpc5125_psc_rx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_5125(port)->rxsr) &
+ in_be32(&FIFO_5125(port)->rximr) & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc5125_psc_tx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_5125(port)->txsr) &
+ in_be32(&FIFO_5125(port)->tximr) & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc5125_psc_tx_empty(struct uart_port *port)
+{
+ return in_be32(&FIFO_5125(port)->txsr) & MPC512x_PSC_FIFO_EMPTY;
+}
+
+static void mpc5125_psc_stop_rx(struct uart_port *port)
+{
+ unsigned long rx_fifo_imr;
+
+ rx_fifo_imr = in_be32(&FIFO_5125(port)->rximr);
+ rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_5125(port)->rximr, rx_fifo_imr);
+}
+
+static void mpc5125_psc_start_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr);
+ tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc5125_psc_stop_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_5125(port)->tximr);
+ tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_5125(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc5125_psc_rx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_5125(port)->rxisr, in_be32(&FIFO_5125(port)->rxisr));
+}
+
+static void mpc5125_psc_tx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_5125(port)->txisr, in_be32(&FIFO_5125(port)->txisr));
+}
+
+static void mpc5125_psc_write_char(struct uart_port *port, unsigned char c)
+{
+ out_8(&FIFO_5125(port)->txdata_8, c);
+}
+
+static unsigned char mpc5125_psc_read_char(struct uart_port *port)
+{
+ return in_8(&FIFO_5125(port)->rxdata_8);
+}
+
+static void mpc5125_psc_cw_disable_ints(struct uart_port *port)
+{
+ port->read_status_mask =
+ in_be32(&FIFO_5125(port)->tximr) << 16 |
+ in_be32(&FIFO_5125(port)->rximr);
+ out_be32(&FIFO_5125(port)->tximr, 0);
+ out_be32(&FIFO_5125(port)->rximr, 0);
+}
+
+static void mpc5125_psc_cw_restore_ints(struct uart_port *port)
+{
+ out_be32(&FIFO_5125(port)->tximr,
+ (port->read_status_mask >> 16) & 0x7f);
+ out_be32(&FIFO_5125(port)->rximr, port->read_status_mask & 0x7f);
+}
+
+static inline void mpc5125_set_divisor(struct mpc5125_psc __iomem *psc,
+ u8 prescaler, unsigned int divisor)
+{
+ /* select prescaler */
+ out_8(&psc->mpc52xx_psc_clock_select, prescaler);
+ out_8(&psc->ctur, divisor >> 8);
+ out_8(&psc->ctlr, divisor & 0xff);
+}
+
+static unsigned int mpc5125_psc_set_baudrate(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ unsigned int divisor;
+
+ /*
+ * Calculate with a /16 prescaler here.
+ */
+
+ /* uartclk contains the ips freq */
+ baud = uart_get_baud_rate(port, new, old,
+ port->uartclk / (16 * 0xffff) + 1,
+ port->uartclk / 16);
+ divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+ /* enable the /16 prescaler and set the divisor */
+ mpc5125_set_divisor(PSC_5125(port), 0xdd, divisor);
+ return baud;
+}
+
+/*
+ * MPC5125 have compatible PSC FIFO Controller.
+ * Special init not needed.
+ */
+static u16 mpc5125_psc_get_status(struct uart_port *port)
+{
+ return in_be16(&PSC_5125(port)->mpc52xx_psc_status);
+}
+
+static u8 mpc5125_psc_get_ipcr(struct uart_port *port)
+{
+ return in_8(&PSC_5125(port)->mpc52xx_psc_ipcr);
+}
+
+static void mpc5125_psc_command(struct uart_port *port, u8 cmd)
+{
+ out_8(&PSC_5125(port)->command, cmd);
+}
+
+static void mpc5125_psc_set_mode(struct uart_port *port, u8 mr1, u8 mr2)
+{
+ out_8(&PSC_5125(port)->mr1, mr1);
+ out_8(&PSC_5125(port)->mr2, mr2);
+}
+
+static void mpc5125_psc_set_rts(struct uart_port *port, int state)
+{
+ if (state & TIOCM_RTS)
+ out_8(&PSC_5125(port)->op1, MPC52xx_PSC_OP_RTS);
+ else
+ out_8(&PSC_5125(port)->op0, MPC52xx_PSC_OP_RTS);
+}
+
+static void mpc5125_psc_enable_ms(struct uart_port *port)
+{
+ struct mpc5125_psc __iomem *psc = PSC_5125(port);
+
+ /* clear D_*-bits by reading them */
+ in_8(&psc->mpc52xx_psc_ipcr);
+ /* enable CTS and DCD as IPC interrupts */
+ out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc5125_psc_set_sicr(struct uart_port *port, u32 val)
+{
+ out_be32(&PSC_5125(port)->sicr, val);
+}
+
+static void mpc5125_psc_set_imr(struct uart_port *port, u16 val)
+{
+ out_be16(&PSC_5125(port)->mpc52xx_psc_imr, val);
+}
+
+static u8 mpc5125_psc_get_mr1(struct uart_port *port)
+{
+ return in_8(&PSC_5125(port)->mr1);
+}
+
+static struct psc_ops mpc5125_psc_ops = {
+ .fifo_init = mpc5125_psc_fifo_init,
+ .raw_rx_rdy = mpc5125_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc5125_psc_raw_tx_rdy,
+ .rx_rdy = mpc5125_psc_rx_rdy,
+ .tx_rdy = mpc5125_psc_tx_rdy,
+ .tx_empty = mpc5125_psc_tx_empty,
+ .stop_rx = mpc5125_psc_stop_rx,
+ .start_tx = mpc5125_psc_start_tx,
+ .stop_tx = mpc5125_psc_stop_tx,
+ .rx_clr_irq = mpc5125_psc_rx_clr_irq,
+ .tx_clr_irq = mpc5125_psc_tx_clr_irq,
+ .write_char = mpc5125_psc_write_char,
+ .read_char = mpc5125_psc_read_char,
+ .cw_disable_ints = mpc5125_psc_cw_disable_ints,
+ .cw_restore_ints = mpc5125_psc_cw_restore_ints,
+ .set_baudrate = mpc5125_psc_set_baudrate,
+ .clock_alloc = mpc512x_psc_alloc_clock,
+ .clock_relse = mpc512x_psc_relse_clock,
+ .clock = mpc512x_psc_endis_clock,
+ .fifoc_init = mpc512x_psc_fifoc_init,
+ .fifoc_uninit = mpc512x_psc_fifoc_uninit,
+ .get_irq = mpc512x_psc_get_irq,
+ .handle_irq = mpc512x_psc_handle_irq,
+ .get_status = mpc5125_psc_get_status,
+ .get_ipcr = mpc5125_psc_get_ipcr,
+ .command = mpc5125_psc_command,
+ .set_mode = mpc5125_psc_set_mode,
+ .set_rts = mpc5125_psc_set_rts,
+ .enable_ms = mpc5125_psc_enable_ms,
+ .set_sicr = mpc5125_psc_set_sicr,
+ .set_imr = mpc5125_psc_set_imr,
+ .get_mr1 = mpc5125_psc_get_mr1,
+};
+
+static struct psc_ops mpc512x_psc_ops = {
+ .fifo_init = mpc512x_psc_fifo_init,
+ .raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
+ .rx_rdy = mpc512x_psc_rx_rdy,
+ .tx_rdy = mpc512x_psc_tx_rdy,
+ .tx_empty = mpc512x_psc_tx_empty,
+ .stop_rx = mpc512x_psc_stop_rx,
+ .start_tx = mpc512x_psc_start_tx,
+ .stop_tx = mpc512x_psc_stop_tx,
+ .rx_clr_irq = mpc512x_psc_rx_clr_irq,
+ .tx_clr_irq = mpc512x_psc_tx_clr_irq,
+ .write_char = mpc512x_psc_write_char,
+ .read_char = mpc512x_psc_read_char,
+ .cw_disable_ints = mpc512x_psc_cw_disable_ints,
+ .cw_restore_ints = mpc512x_psc_cw_restore_ints,
+ .set_baudrate = mpc512x_psc_set_baudrate,
+ .clock_alloc = mpc512x_psc_alloc_clock,
+ .clock_relse = mpc512x_psc_relse_clock,
+ .clock = mpc512x_psc_endis_clock,
+ .fifoc_init = mpc512x_psc_fifoc_init,
+ .fifoc_uninit = mpc512x_psc_fifoc_uninit,
+ .get_irq = mpc512x_psc_get_irq,
+ .handle_irq = mpc512x_psc_handle_irq,
+ .get_status = mpc52xx_psc_get_status,
+ .get_ipcr = mpc52xx_psc_get_ipcr,
+ .command = mpc52xx_psc_command,
+ .set_mode = mpc52xx_psc_set_mode,
+ .set_rts = mpc52xx_psc_set_rts,
+ .enable_ms = mpc52xx_psc_enable_ms,
+ .set_sicr = mpc52xx_psc_set_sicr,
+ .set_imr = mpc52xx_psc_set_imr,
+ .get_mr1 = mpc52xx_psc_get_mr1,
+};
+#endif /* CONFIG_PPC_MPC512x */
+
+
+static const struct psc_ops *psc_ops;
+
+/* ======================================================================== */
+/* UART operations */
+/* ======================================================================== */
+
+static unsigned int
+mpc52xx_uart_tx_empty(struct uart_port *port)
+{
+ return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0;
+}
+
+static void
+mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ psc_ops->set_rts(port, mctrl & TIOCM_RTS);
+}
+
+static unsigned int
+mpc52xx_uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int ret = TIOCM_DSR;
+ u8 status = psc_ops->get_ipcr(port);
+
+ if (!(status & MPC52xx_PSC_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & MPC52xx_PSC_DCD))
+ ret |= TIOCM_CAR;
+
+ return ret;
+}
+
+static void
+mpc52xx_uart_stop_tx(struct uart_port *port)
+{
+ /* port->lock taken by caller */
+ psc_ops->stop_tx(port);
+}
+
+static void
+mpc52xx_uart_start_tx(struct uart_port *port)
+{
+ /* port->lock taken by caller */
+ psc_ops->start_tx(port);
+}
+
+static void
+mpc52xx_uart_stop_rx(struct uart_port *port)
+{
+ /* port->lock taken by caller */
+ psc_ops->stop_rx(port);
+}
+
+static void
+mpc52xx_uart_enable_ms(struct uart_port *port)
+{
+ psc_ops->enable_ms(port);
+}
+
+static void
+mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (ctl == -1)
+ psc_ops->command(port, MPC52xx_PSC_START_BRK);
+ else
+ psc_ops->command(port, MPC52xx_PSC_STOP_BRK);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int
+mpc52xx_uart_startup(struct uart_port *port)
+{
+ int ret;
+
+ if (psc_ops->clock) {
+ ret = psc_ops->clock(port, 1);
+ if (ret)
+ return ret;
+ }
+
+ /* Request IRQ */
+ ret = request_irq(port->irq, mpc52xx_uart_int,
+ port->irqflags, "mpc52xx_psc_uart", port);
+ if (ret)
+ return ret;
+
+ /* Reset/activate the port, clear and enable interrupts */
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
+
+ psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */
+
+ psc_ops->fifo_init(port);
+
+ psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
+
+ return 0;
+}
+
+static void
+mpc52xx_uart_shutdown(struct uart_port *port)
+{
+ /* Shut down the port. Leave TX active if on a console port */
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
+ if (!uart_console(port))
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
+
+ port->read_status_mask = 0;
+ psc_ops->set_imr(port, port->read_status_mask);
+
+ if (psc_ops->clock)
+ psc_ops->clock(port, 0);
+
+ /* Disable interrupt */
+ psc_ops->cw_disable_ints(port);
+
+ /* Release interrupt */
+ free_irq(port->irq, port);
+}
+
+static void
+mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned char mr1, mr2;
+ unsigned int j;
+ unsigned int baud;
+
+ /* Prepare what we're gonna write */
+ mr1 = 0;
+
+ switch (new->c_cflag & CSIZE) {
+ case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
+ break;
+ case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
+ break;
+ case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
+ break;
+ case CS8:
+ default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
+ }
+
+ if (new->c_cflag & PARENB) {
+ if (new->c_cflag & CMSPAR)
+ mr1 |= MPC52xx_PSC_MODE_PARFORCE;
+
+ /* With CMSPAR, PARODD also means high parity (same as termios) */
+ mr1 |= (new->c_cflag & PARODD) ?
+ MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
+ } else {
+ mr1 |= MPC52xx_PSC_MODE_PARNONE;
+ }
+
+ mr2 = 0;
+
+ if (new->c_cflag & CSTOPB)
+ mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
+ else
+ mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
+ MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
+ MPC52xx_PSC_MODE_ONE_STOP;
+
+ if (new->c_cflag & CRTSCTS) {
+ mr1 |= MPC52xx_PSC_MODE_RXRTS;
+ mr2 |= MPC52xx_PSC_MODE_TXCTS;
+ }
+
+ /* Get the lock */
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Do our best to flush TX & RX, so we don't lose anything */
+ /* But we don't wait indefinitely ! */
+ j = 5000000; /* Maximum wait */
+ /* FIXME Can't receive chars since set_termios might be called at early
+ * boot for the console, all stuff is not yet ready to receive at that
+ * time and that just makes the kernel oops */
+ /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
+ while (!mpc52xx_uart_tx_empty(port) && --j)
+ udelay(1);
+
+ if (!j)
+ printk(KERN_ERR "mpc52xx_uart.c: "
+ "Unable to flush RX & TX fifos in-time in set_termios."
+ "Some chars may have been lost.\n");
+
+ /* Reset the TX & RX */
+ psc_ops->command(port, MPC52xx_PSC_RST_RX);
+ psc_ops->command(port, MPC52xx_PSC_RST_TX);
+
+ /* Send new mode settings */
+ psc_ops->set_mode(port, mr1, mr2);
+ baud = psc_ops->set_baudrate(port, new, old);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ if (UART_ENABLE_MS(port, new->c_cflag))
+ mpc52xx_uart_enable_ms(port);
+
+ /* Reenable TX & RX */
+ psc_ops->command(port, MPC52xx_PSC_TX_ENABLE);
+ psc_ops->command(port, MPC52xx_PSC_RX_ENABLE);
+
+ /* We're all set, release the lock */
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *
+mpc52xx_uart_type(struct uart_port *port)
+{
+ /*
+ * We keep using PORT_MPC52xx for historic reasons although it applies
+ * for MPC512x, too, but print "MPC5xxx" to not irritate users
+ */
+ return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL;
+}
+
+static void
+mpc52xx_uart_release_port(struct uart_port *port)
+{
+ if (psc_ops->clock_relse)
+ psc_ops->clock_relse(port);
+
+ /* remapped by us ? */
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
+}
+
+static int
+mpc52xx_uart_request_port(struct uart_port *port)
+{
+ int err;
+
+ if (port->flags & UPF_IOREMAP) /* Need to remap ? */
+ port->membase = ioremap(port->mapbase,
+ sizeof(struct mpc52xx_psc));
+
+ if (!port->membase)
+ return -EINVAL;
+
+ err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
+ "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
+
+ if (err)
+ goto out_membase;
+
+ if (psc_ops->clock_alloc) {
+ err = psc_ops->clock_alloc(port);
+ if (err)
+ goto out_mapregion;
+ }
+
+ return 0;
+
+out_mapregion:
+ release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
+out_membase:
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+ return err;
+}
+
+static void
+mpc52xx_uart_config_port(struct uart_port *port, int flags)
+{
+ if ((flags & UART_CONFIG_TYPE)
+ && (mpc52xx_uart_request_port(port) == 0))
+ port->type = PORT_MPC52xx;
+}
+
+static int
+mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
+ return -EINVAL;
+
+ if ((ser->irq != port->irq) ||
+ (ser->io_type != UPIO_MEM) ||
+ (ser->baud_base != port->uartclk) ||
+ (ser->iomem_base != (void *)port->mapbase) ||
+ (ser->hub6 != 0))
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static struct uart_ops mpc52xx_uart_ops = {
+ .tx_empty = mpc52xx_uart_tx_empty,
+ .set_mctrl = mpc52xx_uart_set_mctrl,
+ .get_mctrl = mpc52xx_uart_get_mctrl,
+ .stop_tx = mpc52xx_uart_stop_tx,
+ .start_tx = mpc52xx_uart_start_tx,
+ .stop_rx = mpc52xx_uart_stop_rx,
+ .enable_ms = mpc52xx_uart_enable_ms,
+ .break_ctl = mpc52xx_uart_break_ctl,
+ .startup = mpc52xx_uart_startup,
+ .shutdown = mpc52xx_uart_shutdown,
+ .set_termios = mpc52xx_uart_set_termios,
+/* .pm = mpc52xx_uart_pm, Not supported yet */
+ .type = mpc52xx_uart_type,
+ .release_port = mpc52xx_uart_release_port,
+ .request_port = mpc52xx_uart_request_port,
+ .config_port = mpc52xx_uart_config_port,
+ .verify_port = mpc52xx_uart_verify_port
+};
+
+
+/* ======================================================================== */
+/* Interrupt handling */
+/* ======================================================================== */
+
+static inline int
+mpc52xx_uart_int_rx_chars(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch, flag;
+ unsigned short status;
+
+ /* While we can read, do so ! */
+ while (psc_ops->raw_rx_rdy(port)) {
+ /* Get the char */
+ ch = psc_ops->read_char(port);
+
+ /* Handle sysreq char */
+#ifdef SUPPORT_SYSRQ
+ if (uart_handle_sysrq_char(port, ch)) {
+ port->sysrq = 0;
+ continue;
+ }
+#endif
+
+ /* Store it */
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ status = psc_ops->get_status(port);
+
+ if (status & (MPC52xx_PSC_SR_PE |
+ MPC52xx_PSC_SR_FE |
+ MPC52xx_PSC_SR_RB)) {
+
+ if (status & MPC52xx_PSC_SR_RB) {
+ flag = TTY_BREAK;
+ uart_handle_break(port);
+ port->icount.brk++;
+ } else if (status & MPC52xx_PSC_SR_PE) {
+ flag = TTY_PARITY;
+ port->icount.parity++;
+ }
+ else if (status & MPC52xx_PSC_SR_FE) {
+ flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ /* Clear error condition */
+ psc_ops->command(port, MPC52xx_PSC_RST_ERR_STAT);
+
+ }
+ tty_insert_flip_char(tport, ch, flag);
+ if (status & MPC52xx_PSC_SR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ port->icount.overrun++;
+ }
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+
+ return psc_ops->raw_rx_rdy(port);
+}
+
+static inline int
+mpc52xx_uart_int_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ /* Process out of band chars */
+ if (port->x_char) {
+ psc_ops->write_char(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return 1;
+ }
+
+ /* Nothing to do ? */
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ mpc52xx_uart_stop_tx(port);
+ return 0;
+ }
+
+ /* Send chars */
+ while (psc_ops->raw_tx_rdy(port)) {
+ psc_ops->write_char(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Wake up */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /* Maybe we're done after all */
+ if (uart_circ_empty(xmit)) {
+ mpc52xx_uart_stop_tx(port);
+ return 0;
+ }
+
+ return 1;
+}
+
+static irqreturn_t
+mpc5xxx_uart_process_int(struct uart_port *port)
+{
+ unsigned long pass = ISR_PASS_LIMIT;
+ unsigned int keepgoing;
+ u8 status;
+
+ /* While we have stuff to do, we continue */
+ do {
+ /* If we don't find anything to do, we stop */
+ keepgoing = 0;
+
+ psc_ops->rx_clr_irq(port);
+ if (psc_ops->rx_rdy(port))
+ keepgoing |= mpc52xx_uart_int_rx_chars(port);
+
+ psc_ops->tx_clr_irq(port);
+ if (psc_ops->tx_rdy(port))
+ keepgoing |= mpc52xx_uart_int_tx_chars(port);
+
+ status = psc_ops->get_ipcr(port);
+ if (status & MPC52xx_PSC_D_DCD)
+ uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
+
+ if (status & MPC52xx_PSC_D_CTS)
+ uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
+
+ /* Limit number of iteration */
+ if (!(--pass))
+ keepgoing = 0;
+
+ } while (keepgoing);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+mpc52xx_uart_int(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ irqreturn_t ret;
+
+ spin_lock(&port->lock);
+
+ ret = psc_ops->handle_irq(port);
+
+ spin_unlock(&port->lock);
+
+ return ret;
+}
+
+/* ======================================================================== */
+/* Console ( if applicable ) */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
+
+static void __init
+mpc52xx_console_get_options(struct uart_port *port,
+ int *baud, int *parity, int *bits, int *flow)
+{
+ unsigned char mr1;
+
+ pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
+
+ /* Read the mode registers */
+ mr1 = psc_ops->get_mr1(port);
+
+ /* CT{U,L}R are write-only ! */
+ *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+
+ /* Parse them */
+ switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
+ case MPC52xx_PSC_MODE_5_BITS:
+ *bits = 5;
+ break;
+ case MPC52xx_PSC_MODE_6_BITS:
+ *bits = 6;
+ break;
+ case MPC52xx_PSC_MODE_7_BITS:
+ *bits = 7;
+ break;
+ case MPC52xx_PSC_MODE_8_BITS:
+ default:
+ *bits = 8;
+ }
+
+ if (mr1 & MPC52xx_PSC_MODE_PARNONE)
+ *parity = 'n';
+ else
+ *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
+}
+
+static void
+mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &mpc52xx_uart_ports[co->index];
+ unsigned int i, j;
+
+ /* Disable interrupts */
+ psc_ops->cw_disable_ints(port);
+
+ /* Wait the TX buffer to be empty */
+ j = 5000000; /* Maximum wait */
+ while (!mpc52xx_uart_tx_empty(port) && --j)
+ udelay(1);
+
+ /* Write all the chars */
+ for (i = 0; i < count; i++, s++) {
+ /* Line return handling */
+ if (*s == '\n')
+ psc_ops->write_char(port, '\r');
+
+ /* Send the char */
+ psc_ops->write_char(port, *s);
+
+ /* Wait the TX buffer to be empty */
+ j = 20000; /* Maximum wait */
+ while (!mpc52xx_uart_tx_empty(port) && --j)
+ udelay(1);
+ }
+
+ /* Restore interrupt state */
+ psc_ops->cw_restore_ints(port);
+}
+
+
+static int __init
+mpc52xx_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &mpc52xx_uart_ports[co->index];
+ struct device_node *np = mpc52xx_uart_nodes[co->index];
+ unsigned int uartclk;
+ struct resource res;
+ int ret;
+
+ int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
+ co, co->index, options);
+
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
+ pr_debug("PSC%x out of range\n", co->index);
+ return -EINVAL;
+ }
+
+ if (!np) {
+ pr_debug("PSC%x not found in device tree\n", co->index);
+ return -EINVAL;
+ }
+
+ pr_debug("Console on ttyPSC%x is %s\n",
+ co->index, mpc52xx_uart_nodes[co->index]->full_name);
+
+ /* Fetch register locations */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ pr_debug("Could not get resources for PSC%x\n", co->index);
+ return ret;
+ }
+
+ uartclk = mpc5xxx_get_bus_frequency(np);
+ if (uartclk == 0) {
+ pr_debug("Could not find uart clock frequency!\n");
+ return -EINVAL;
+ }
+
+ /* Basic port init. Needed since we use some uart_??? func before
+ * real init for early access */
+ spin_lock_init(&port->lock);
+ port->uartclk = uartclk;
+ port->ops = &mpc52xx_uart_ops;
+ port->mapbase = res.start;
+ port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
+ port->irq = irq_of_parse_and_map(np, 0);
+
+ if (port->membase == NULL)
+ return -EINVAL;
+
+ pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
+ (void *)port->mapbase, port->membase,
+ port->irq, port->uartclk);
+
+ /* Setup the port parameters accoding to options */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
+
+ pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
+ baud, bits, parity, flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+
+static struct uart_driver mpc52xx_uart_driver;
+
+static struct console mpc52xx_console = {
+ .name = "ttyPSC",
+ .write = mpc52xx_console_write,
+ .device = uart_console_device,
+ .setup = mpc52xx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */
+ .data = &mpc52xx_uart_driver,
+};
+
+
+static int __init
+mpc52xx_console_init(void)
+{
+ mpc52xx_uart_of_enumerate();
+ register_console(&mpc52xx_console);
+ return 0;
+}
+
+console_initcall(mpc52xx_console_init);
+
+#define MPC52xx_PSC_CONSOLE &mpc52xx_console
+#else
+#define MPC52xx_PSC_CONSOLE NULL
+#endif
+
+
+/* ======================================================================== */
+/* UART Driver */
+/* ======================================================================== */
+
+static struct uart_driver mpc52xx_uart_driver = {
+ .driver_name = "mpc52xx_psc_uart",
+ .dev_name = "ttyPSC",
+ .major = SERIAL_PSC_MAJOR,
+ .minor = SERIAL_PSC_MINOR,
+ .nr = MPC52xx_PSC_MAXNUM,
+ .cons = MPC52xx_PSC_CONSOLE,
+};
+
+/* ======================================================================== */
+/* OF Platform Driver */
+/* ======================================================================== */
+
+static const struct of_device_id mpc52xx_uart_of_match[] = {
+#ifdef CONFIG_PPC_MPC52xx
+ { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
+ { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
+ /* binding used by old lite5200 device trees: */
+ { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
+ /* binding used by efika: */
+ { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, },
+#endif
+#ifdef CONFIG_PPC_MPC512x
+ { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, },
+ { .compatible = "fsl,mpc5125-psc-uart", .data = &mpc5125_psc_ops, },
+#endif
+ {},
+};
+
+static int mpc52xx_uart_of_probe(struct platform_device *op)
+{
+ int idx = -1;
+ unsigned int uartclk;
+ struct uart_port *port = NULL;
+ struct resource res;
+ int ret;
+
+ /* Check validity & presence */
+ for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
+ if (mpc52xx_uart_nodes[idx] == op->dev.of_node)
+ break;
+ if (idx >= MPC52xx_PSC_MAXNUM)
+ return -EINVAL;
+ pr_debug("Found %s assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[idx]->full_name, idx);
+
+ /* set the uart clock to the input clock of the psc, the different
+ * prescalers are taken into account in the set_baudrate() methods
+ * of the respective chip */
+ uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
+ if (uartclk == 0) {
+ dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
+ return -EINVAL;
+ }
+
+ /* Init the port structure */
+ port = &mpc52xx_uart_ports[idx];
+
+ spin_lock_init(&port->lock);
+ port->uartclk = uartclk;
+ port->fifosize = 512;
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF |
+ (uart_console(port) ? 0 : UPF_IOREMAP);
+ port->line = idx;
+ port->ops = &mpc52xx_uart_ops;
+ port->dev = &op->dev;
+
+ /* Search for IRQ and mapbase */
+ ret = of_address_to_resource(op->dev.of_node, 0, &res);
+ if (ret)
+ return ret;
+
+ port->mapbase = res.start;
+ if (!port->mapbase) {
+ dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
+ return -EINVAL;
+ }
+
+ psc_ops->get_irq(port, op->dev.of_node);
+ if (port->irq == 0) {
+ dev_dbg(&op->dev, "Could not get irq\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
+ (void *)port->mapbase, port->irq, port->uartclk);
+
+ /* Add the port to the uart sub-system */
+ ret = uart_add_one_port(&mpc52xx_uart_driver, port);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(op, (void *)port);
+ return 0;
+}
+
+static int
+mpc52xx_uart_of_remove(struct platform_device *op)
+{
+ struct uart_port *port = platform_get_drvdata(op);
+
+ if (port)
+ uart_remove_one_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state)
+{
+ struct uart_port *port = platform_get_drvdata(op);
+
+ if (port)
+ uart_suspend_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+static int
+mpc52xx_uart_of_resume(struct platform_device *op)
+{
+ struct uart_port *port = platform_get_drvdata(op);
+
+ if (port)
+ uart_resume_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+#endif
+
+static void
+mpc52xx_uart_of_assign(struct device_node *np)
+{
+ int i;
+
+ /* Find the first free PSC number */
+ for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
+ if (mpc52xx_uart_nodes[i] == NULL) {
+ of_node_get(np);
+ mpc52xx_uart_nodes[i] = np;
+ return;
+ }
+ }
+}
+
+static void
+mpc52xx_uart_of_enumerate(void)
+{
+ static int enum_done;
+ struct device_node *np;
+ const struct of_device_id *match;
+ int i;
+
+ if (enum_done)
+ return;
+
+ /* Assign index to each PSC in device tree */
+ for_each_matching_node(np, mpc52xx_uart_of_match) {
+ match = of_match_node(mpc52xx_uart_of_match, np);
+ psc_ops = match->data;
+ mpc52xx_uart_of_assign(np);
+ }
+
+ enum_done = 1;
+
+ for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
+ if (mpc52xx_uart_nodes[i])
+ pr_debug("%s assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[i]->full_name, i);
+ }
+}
+
+MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
+
+static struct platform_driver mpc52xx_uart_of_driver = {
+ .probe = mpc52xx_uart_of_probe,
+ .remove = mpc52xx_uart_of_remove,
+#ifdef CONFIG_PM
+ .suspend = mpc52xx_uart_of_suspend,
+ .resume = mpc52xx_uart_of_resume,
+#endif
+ .driver = {
+ .name = "mpc52xx-psc-uart",
+ .of_match_table = mpc52xx_uart_of_match,
+ },
+};
+
+
+/* ======================================================================== */
+/* Module */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_uart_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
+
+ ret = uart_register_driver(&mpc52xx_uart_driver);
+ if (ret) {
+ printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+ __FILE__, ret);
+ return ret;
+ }
+
+ mpc52xx_uart_of_enumerate();
+
+ /*
+ * Map the PSC FIFO Controller and init if on MPC512x.
+ */
+ if (psc_ops && psc_ops->fifoc_init) {
+ ret = psc_ops->fifoc_init();
+ if (ret)
+ goto err_init;
+ }
+
+ ret = platform_driver_register(&mpc52xx_uart_of_driver);
+ if (ret) {
+ printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
+ __FILE__, ret);
+ goto err_reg;
+ }
+
+ return 0;
+err_reg:
+ if (psc_ops && psc_ops->fifoc_uninit)
+ psc_ops->fifoc_uninit();
+err_init:
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ return ret;
+}
+
+static void __exit
+mpc52xx_uart_exit(void)
+{
+ if (psc_ops->fifoc_uninit)
+ psc_ops->fifoc_uninit();
+
+ platform_driver_unregister(&mpc52xx_uart_of_driver);
+ uart_unregister_driver(&mpc52xx_uart_driver);
+}
+
+
+module_init(mpc52xx_uart_init);
+module_exit(mpc52xx_uart_exit);
+
+MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
+MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
+MODULE_LICENSE("GPL");