Initial import

24 files changed, 22766 insertions, 0 deletions

diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
new file mode 100644
index 000000000..cc0ced08b
--- /dev/null
+++ b/drivers/usb/core/Kconfig
@@ -0,0 +1,86 @@
+#
+# USB Core configuration
+#
+config USB_ANNOUNCE_NEW_DEVICES
+	bool "USB announce new devices"
+	help
+	  Say Y here if you want the USB core to always announce the
+	  idVendor, idProduct, Manufacturer, Product, and SerialNumber
+	  strings for every new USB device to the syslog.  This option is
+	  usually used by distro vendors to help with debugging and to
+	  let users know what specific device was added to the machine
+	  in what location.
+
+	  If you do not want this kind of information sent to the system
+	  log, or have any doubts about this, say N here.
+
+comment "Miscellaneous USB options"
+
+config USB_DEFAULT_PERSIST
+	bool "Enable USB persist by default"
+	default y
+	help
+	  Say N here if you don't want USB power session persistence
+	  enabled by default.  If you say N it will make suspended USB
+	  devices that lose power get reenumerated as if they had been
+	  unplugged, causing any mounted filesystems to be lost.  The
+	  persist feature can still be enabled for individual devices
+	  through the power/persist sysfs node. See
+	  Documentation/usb/persist.txt for more info.
+
+	  If you have any questions about this, say Y here, only say N
+	  if you know exactly what you are doing.
+
+config USB_DYNAMIC_MINORS
+	bool "Dynamic USB minor allocation"
+	help
+	  If you say Y here, the USB subsystem will use dynamic minor
+	  allocation for any device that uses the USB major number.
+	  This means that you can have more than 16 of a single type
+	  of device (like USB printers).
+
+	  If you are unsure about this, say N here.
+
+config USB_OTG
+	bool "OTG support"
+	depends on PM
+	default n
+	help
+	  The most notable feature of USB OTG is support for a
+	  "Dual-Role" device, which can act as either a device
+	  or a host. The initial role is decided by the type of
+	  plug inserted and can be changed later when two dual
+	  role devices talk to each other.
+
+	  Select this only if your board has Mini-AB/Micro-AB
+	  connector.
+
+config USB_OTG_WHITELIST
+	bool "Rely on OTG and EH Targeted Peripherals List"
+	depends on USB
+	help
+	  If you say Y here, the "otg_whitelist.h" file will be used as a
+	  product whitelist, so USB peripherals not listed there will be
+	  rejected during enumeration.  This behavior is required by the
+	  USB OTG and EH specification for all devices not on your product's
+	  "Targeted Peripherals List".  "Embedded Hosts" are likewise
+	  allowed to support only a limited number of peripherals.
+
+config USB_OTG_BLACKLIST_HUB
+	bool "Disable external hubs"
+	depends on USB_OTG || EXPERT
+	help
+	  If you say Y here, then Linux will refuse to enumerate
+	  external hubs.  OTG hosts are allowed to reduce hardware
+	  and software costs by not supporting external hubs.  So
+	  are "Embedded Hosts" that don't offer OTG support.
+
+config USB_OTG_FSM
+	tristate "USB 2.0 OTG FSM implementation"
+	depends on USB
+	select USB_OTG
+	select USB_PHY
+	help
+	  Implements OTG Finite State Machine as specified in On-The-Go
+	  and Embedded Host Supplement to the USB Revision 2.0 Specification.
+
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
new file mode 100644
index 000000000..2f6f93220
--- /dev/null
+++ b/drivers/usb/core/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for USB Core files and filesystem
+#
+
+usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
+usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
+usbcore-y += devio.o notify.o generic.o quirks.o devices.o
+usbcore-y += port.o
+
+usbcore-$(CONFIG_PCI)		+= hcd-pci.o
+usbcore-$(CONFIG_ACPI)		+= usb-acpi.o
+
+obj-$(CONFIG_USB)		+= usbcore.o
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
new file mode 100644
index 000000000..506b969ea
--- /dev/null
+++ b/drivers/usb/core/buffer.c
@@ -0,0 +1,160 @@
+/*
+ * DMA memory management for framework level HCD code (hc_driver)
+ *
+ * This implementation plugs in through generic "usb_bus" level methods,
+ * and should work with all USB controllers, regardless of bus type.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+
+/*
+ * DMA-Coherent Buffers
+ */
+
+/* FIXME tune these based on pool statistics ... */
+static size_t pool_max[HCD_BUFFER_POOLS] = {
+	32, 128, 512, 2048,
+};
+
+void __init usb_init_pool_max(void)
+{
+	/*
+	 * The pool_max values must never be smaller than
+	 * ARCH_KMALLOC_MINALIGN.
+	 */
+	if (ARCH_KMALLOC_MINALIGN <= 32)
+		;			/* Original value is okay */
+	else if (ARCH_KMALLOC_MINALIGN <= 64)
+		pool_max[0] = 64;
+	else if (ARCH_KMALLOC_MINALIGN <= 128)
+		pool_max[0] = 0;	/* Don't use this pool */
+	else
+		BUILD_BUG();		/* We don't allow this */
+}
+
+/* SETUP primitives */
+
+/**
+ * hcd_buffer_create - initialize buffer pools
+ * @hcd: the bus whose buffer pools are to be initialized
+ * Context: !in_interrupt()
+ *
+ * Call this as part of initializing a host controller that uses the dma
+ * memory allocators.  It initializes some pools of dma-coherent memory that
+ * will be shared by all drivers using that controller.
+ *
+ * Call hcd_buffer_destroy() to clean up after using those pools.
+ *
+ * Return: 0 if successful. A negative errno value otherwise.
+ */
+int hcd_buffer_create(struct usb_hcd *hcd)
+{
+	char		name[16];
+	int		i, size;
+
+	if (!hcd->self.controller->dma_mask &&
+	    !(hcd->driver->flags & HCD_LOCAL_MEM))
+		return 0;
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		size = pool_max[i];
+		if (!size)
+			continue;
+		snprintf(name, sizeof name, "buffer-%d", size);
+		hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
+				size, size, 0);
+		if (!hcd->pool[i]) {
+			hcd_buffer_destroy(hcd);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+
+/**
+ * hcd_buffer_destroy - deallocate buffer pools
+ * @hcd: the bus whose buffer pools are to be destroyed
+ * Context: !in_interrupt()
+ *
+ * This frees the buffer pools created by hcd_buffer_create().
+ */
+void hcd_buffer_destroy(struct usb_hcd *hcd)
+{
+	int i;
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		struct dma_pool *pool = hcd->pool[i];
+		if (pool) {
+			dma_pool_destroy(pool);
+			hcd->pool[i] = NULL;
+		}
+	}
+}
+
+
+/* sometimes alloc/free could use kmalloc with GFP_DMA, for
+ * better sharing and to leverage mm/slab.c intelligence.
+ */
+
+void *hcd_buffer_alloc(
+	struct usb_bus		*bus,
+	size_t			size,
+	gfp_t			mem_flags,
+	dma_addr_t		*dma
+)
+{
+	struct usb_hcd		*hcd = bus_to_hcd(bus);
+	int			i;
+
+	/* some USB hosts just use PIO */
+	if (!bus->controller->dma_mask &&
+	    !(hcd->driver->flags & HCD_LOCAL_MEM)) {
+		*dma = ~(dma_addr_t) 0;
+		return kmalloc(size, mem_flags);
+	}
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		if (size <= pool_max[i])
+			return dma_pool_alloc(hcd->pool[i], mem_flags, dma);
+	}
+	return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
+}
+
+void hcd_buffer_free(
+	struct usb_bus		*bus,
+	size_t			size,
+	void			*addr,
+	dma_addr_t		dma
+)
+{
+	struct usb_hcd		*hcd = bus_to_hcd(bus);
+	int			i;
+
+	if (!addr)
+		return;
+
+	if (!bus->controller->dma_mask &&
+	    !(hcd->driver->flags & HCD_LOCAL_MEM)) {
+		kfree(addr);
+		return;
+	}
+
+	for (i = 0; i < HCD_BUFFER_POOLS; i++) {
+		if (size <= pool_max[i]) {
+			dma_pool_free(hcd->pool[i], addr, dma);
+			return;
+		}
+	}
+	dma_free_coherent(hcd->self.controller, size, addr, dma);
+}
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
new file mode 100644
index 000000000..b2a540b43
--- /dev/null
+++ b/drivers/usb/core/config.c
@@ -0,0 +1,869 @@
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <asm/byteorder.h>
+#include "usb.h"
+
+
+#define USB_MAXALTSETTING		128	/* Hard limit */
+
+#define USB_MAXCONFIG			8	/* Arbitrary limit */
+
+
+static inline const char *plural(int n)
+{
+	return (n == 1 ? "" : "s");
+}
+
+static int find_next_descriptor(unsigned char *buffer, int size,
+    int dt1, int dt2, int *num_skipped)
+{
+	struct usb_descriptor_header *h;
+	int n = 0;
+	unsigned char *buffer0 = buffer;
+
+	/* Find the next descriptor of type dt1 or dt2 */
+	while (size > 0) {
+		h = (struct usb_descriptor_header *) buffer;
+		if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2)
+			break;
+		buffer += h->bLength;
+		size -= h->bLength;
+		++n;
+	}
+
+	/* Store the number of descriptors skipped and return the
+	 * number of bytes skipped */
+	if (num_skipped)
+		*num_skipped = n;
+	return buffer - buffer0;
+}
+
+static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+		int inum, int asnum, struct usb_host_endpoint *ep,
+		unsigned char *buffer, int size)
+{
+	struct usb_ss_ep_comp_descriptor *desc;
+	int max_tx;
+
+	/* The SuperSpeed endpoint companion descriptor is supposed to
+	 * be the first thing immediately following the endpoint descriptor.
+	 */
+	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
+	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP ||
+			size < USB_DT_SS_EP_COMP_SIZE) {
+		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
+				" interface %d altsetting %d ep %d: "
+				"using minimum values\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+
+		/* Fill in some default values.
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
+		 */
+		ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE;
+		ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		if (usb_endpoint_xfer_isoc(&ep->desc) ||
+				usb_endpoint_xfer_int(&ep->desc))
+			ep->ss_ep_comp.wBytesPerInterval =
+					ep->desc.wMaxPacketSize;
+		return;
+	}
+
+	memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE);
+
+	/* Check the various values */
+	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
+		dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bMaxBurst = 0;
+	} else if (desc->bMaxBurst > 15) {
+		dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 15\n", desc->bMaxBurst,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bMaxBurst = 15;
+	}
+
+	if ((usb_endpoint_xfer_control(&ep->desc) ||
+			usb_endpoint_xfer_int(&ep->desc)) &&
+				desc->bmAttributes != 0) {
+		dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to zero\n",
+				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
+				desc->bmAttributes,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 0;
+	} else if (usb_endpoint_xfer_bulk(&ep->desc) &&
+			desc->bmAttributes > 16) {
+		dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to max\n",
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 16;
+	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
+			desc->bmAttributes > 2) {
+		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to 3\n", desc->bmAttributes + 1,
+				cfgno, inum, asnum, ep->desc.bEndpointAddress);
+		ep->ss_ep_comp.bmAttributes = 2;
+	}
+
+	if (usb_endpoint_xfer_isoc(&ep->desc))
+		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+			usb_endpoint_maxp(&ep->desc);
+	else if (usb_endpoint_xfer_int(&ep->desc))
+		max_tx = usb_endpoint_maxp(&ep->desc) *
+			(desc->bMaxBurst + 1);
+	else
+		max_tx = 999999;
+	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
+		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
+				"config %d interface %d altsetting %d ep %d: "
+				"setting to %d\n",
+				usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
+				le16_to_cpu(desc->wBytesPerInterval),
+				cfgno, inum, asnum, ep->desc.bEndpointAddress,
+				max_tx);
+		ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx);
+	}
+}
+
+static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
+    int asnum, struct usb_host_interface *ifp, int num_ep,
+    unsigned char *buffer, int size)
+{
+	unsigned char *buffer0 = buffer;
+	struct usb_endpoint_descriptor *d;
+	struct usb_host_endpoint *endpoint;
+	int n, i, j, retval;
+
+	d = (struct usb_endpoint_descriptor *) buffer;
+	buffer += d->bLength;
+	size -= d->bLength;
+
+	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
+		n = USB_DT_ENDPOINT_AUDIO_SIZE;
+	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
+		n = USB_DT_ENDPOINT_SIZE;
+	else {
+		dev_warn(ddev, "config %d interface %d altsetting %d has an "
+		    "invalid endpoint descriptor of length %d, skipping\n",
+		    cfgno, inum, asnum, d->bLength);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
+
+	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
+	if (i >= 16 || i == 0) {
+		dev_warn(ddev, "config %d interface %d altsetting %d has an "
+		    "invalid endpoint with address 0x%X, skipping\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+		goto skip_to_next_endpoint_or_interface_descriptor;
+	}
+
+	/* Only store as many endpoints as we have room for */
+	if (ifp->desc.bNumEndpoints >= num_ep)
+		goto skip_to_next_endpoint_or_interface_descriptor;
+
+	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
+	++ifp->desc.bNumEndpoints;
+
+	memcpy(&endpoint->desc, d, n);
+	INIT_LIST_HEAD(&endpoint->urb_list);
+
+	/* Fix up bInterval values outside the legal range. Use 32 ms if no
+	 * proper value can be guessed. */
+	i = 0;		/* i = min, j = max, n = default */
+	j = 255;
+	if (usb_endpoint_xfer_int(d)) {
+		i = 1;
+		switch (to_usb_device(ddev)->speed) {
+		case USB_SPEED_SUPER:
+		case USB_SPEED_HIGH:
+			/* Many device manufacturers are using full-speed
+			 * bInterval values in high-speed interrupt endpoint
+			 * descriptors. Try to fix those and fall back to a
+			 * 32 ms default value otherwise. */
+			n = fls(d->bInterval*8);
+			if (n == 0)
+				n = 9;	/* 32 ms = 2^(9-1) uframes */
+			j = 16;
+
+			/*
+			 * Adjust bInterval for quirked devices.
+			 * This quirk fixes bIntervals reported in
+			 * linear microframes.
+			 */
+			if (to_usb_device(ddev)->quirks &
+				USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+				n = clamp(fls(d->bInterval), i, j);
+				i = j = n;
+			}
+			break;
+		default:		/* USB_SPEED_FULL or _LOW */
+			/* For low-speed, 10 ms is the official minimum.
+			 * But some "overclocked" devices might want faster
+			 * polling so we'll allow it. */
+			n = 32;
+			break;
+		}
+	} else if (usb_endpoint_xfer_isoc(d)) {
+		i = 1;
+		j = 16;
+		switch (to_usb_device(ddev)->speed) {
+		case USB_SPEED_HIGH:
+			n = 9;		/* 32 ms = 2^(9-1) uframes */
+			break;
+		default:		/* USB_SPEED_FULL */
+			n = 6;		/* 32 ms = 2^(6-1) frames */
+			break;
+		}
+	}
+	if (d->bInterval < i || d->bInterval > j) {
+		dev_warn(ddev, "config %d interface %d altsetting %d "
+		    "endpoint 0x%X has an invalid bInterval %d, "
+		    "changing to %d\n",
+		    cfgno, inum, asnum,
+		    d->bEndpointAddress, d->bInterval, n);
+		endpoint->desc.bInterval = n;
+	}
+
+	/* Some buggy low-speed devices have Bulk endpoints, which is
+	 * explicitly forbidden by the USB spec.  In an attempt to make
+	 * them usable, we will try treating them as Interrupt endpoints.
+	 */
+	if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
+			usb_endpoint_xfer_bulk(d)) {
+		dev_warn(ddev, "config %d interface %d altsetting %d "
+		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
+		    cfgno, inum, asnum, d->bEndpointAddress);
+		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
+		endpoint->desc.bInterval = 1;
+		if (usb_endpoint_maxp(&endpoint->desc) > 8)
+			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
+	}
+
+	/*
+	 * Some buggy high speed devices have bulk endpoints using
+	 * maxpacket sizes other than 512.  High speed HCDs may not
+	 * be able to handle that particular bug, so let's warn...
+	 */
+	if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
+			&& usb_endpoint_xfer_bulk(d)) {
+		unsigned maxp;
+
+		maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
+		if (maxp != 512)
+			dev_warn(ddev, "config %d interface %d altsetting %d "
+				"bulk endpoint 0x%X has invalid maxpacket %d\n",
+				cfgno, inum, asnum, d->bEndpointAddress,
+				maxp);
+	}
+
+	/* Parse a possible SuperSpeed endpoint companion descriptor */
+	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER)
+		usb_parse_ss_endpoint_companion(ddev, cfgno,
+				inum, asnum, endpoint, buffer, size);
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the next endpoint or interface descriptor */
+	endpoint->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+			USB_DT_INTERFACE, &n);
+	endpoint->extralen = i;
+	retval = buffer - buffer0 + i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "endpoint");
+	return retval;
+
+skip_to_next_endpoint_or_interface_descriptor:
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+	    USB_DT_INTERFACE, NULL);
+	return buffer - buffer0 + i;
+}
+
+void usb_release_interface_cache(struct kref *ref)
+{
+	struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
+	int j;
+
+	for (j = 0; j < intfc->num_altsetting; j++) {
+		struct usb_host_interface *alt = &intfc->altsetting[j];
+
+		kfree(alt->endpoint);
+		kfree(alt->string);
+	}
+	kfree(intfc);
+}
+
+static int usb_parse_interface(struct device *ddev, int cfgno,
+    struct usb_host_config *config, unsigned char *buffer, int size,
+    u8 inums[], u8 nalts[])
+{
+	unsigned char *buffer0 = buffer;
+	struct usb_interface_descriptor	*d;
+	int inum, asnum;
+	struct usb_interface_cache *intfc;
+	struct usb_host_interface *alt;
+	int i, n;
+	int len, retval;
+	int num_ep, num_ep_orig;
+
+	d = (struct usb_interface_descriptor *) buffer;
+	buffer += d->bLength;
+	size -= d->bLength;
+
+	if (d->bLength < USB_DT_INTERFACE_SIZE)
+		goto skip_to_next_interface_descriptor;
+
+	/* Which interface entry is this? */
+	intfc = NULL;
+	inum = d->bInterfaceNumber;
+	for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+		if (inums[i] == inum) {
+			intfc = config->intf_cache[i];
+			break;
+		}
+	}
+	if (!intfc || intfc->num_altsetting >= nalts[i])
+		goto skip_to_next_interface_descriptor;
+
+	/* Check for duplicate altsetting entries */
+	asnum = d->bAlternateSetting;
+	for ((i = 0, alt = &intfc->altsetting[0]);
+	      i < intfc->num_altsetting;
+	     (++i, ++alt)) {
+		if (alt->desc.bAlternateSetting == asnum) {
+			dev_warn(ddev, "Duplicate descriptor for config %d "
+			    "interface %d altsetting %d, skipping\n",
+			    cfgno, inum, asnum);
+			goto skip_to_next_interface_descriptor;
+		}
+	}
+
+	++intfc->num_altsetting;
+	memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the first endpoint or interface descriptor */
+	alt->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+	    USB_DT_INTERFACE, &n);
+	alt->extralen = i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "interface");
+	buffer += i;
+	size -= i;
+
+	/* Allocate space for the right(?) number of endpoints */
+	num_ep = num_ep_orig = alt->desc.bNumEndpoints;
+	alt->desc.bNumEndpoints = 0;		/* Use as a counter */
+	if (num_ep > USB_MAXENDPOINTS) {
+		dev_warn(ddev, "too many endpoints for config %d interface %d "
+		    "altsetting %d: %d, using maximum allowed: %d\n",
+		    cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
+		num_ep = USB_MAXENDPOINTS;
+	}
+
+	if (num_ep > 0) {
+		/* Can't allocate 0 bytes */
+		len = sizeof(struct usb_host_endpoint) * num_ep;
+		alt->endpoint = kzalloc(len, GFP_KERNEL);
+		if (!alt->endpoint)
+			return -ENOMEM;
+	}
+
+	/* Parse all the endpoint descriptors */
+	n = 0;
+	while (size > 0) {
+		if (((struct usb_descriptor_header *) buffer)->bDescriptorType
+		     == USB_DT_INTERFACE)
+			break;
+		retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
+		    num_ep, buffer, size);
+		if (retval < 0)
+			return retval;
+		++n;
+
+		buffer += retval;
+		size -= retval;
+	}
+
+	if (n != num_ep_orig)
+		dev_warn(ddev, "config %d interface %d altsetting %d has %d "
+		    "endpoint descriptor%s, different from the interface "
+		    "descriptor's value: %d\n",
+		    cfgno, inum, asnum, n, plural(n), num_ep_orig);
+	return buffer - buffer0;
+
+skip_to_next_interface_descriptor:
+	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
+	    USB_DT_INTERFACE, NULL);
+	return buffer - buffer0 + i;
+}
+
+static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
+    struct usb_host_config *config, unsigned char *buffer, int size)
+{
+	struct device *ddev = &dev->dev;
+	unsigned char *buffer0 = buffer;
+	int cfgno;
+	int nintf, nintf_orig;
+	int i, j, n;
+	struct usb_interface_cache *intfc;
+	unsigned char *buffer2;
+	int size2;
+	struct usb_descriptor_header *header;
+	int len, retval;
+	u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
+	unsigned iad_num = 0;
+
+	memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
+	if (config->desc.bDescriptorType != USB_DT_CONFIG ||
+	    config->desc.bLength < USB_DT_CONFIG_SIZE ||
+	    config->desc.bLength > size) {
+		dev_err(ddev, "invalid descriptor for config index %d: "
+		    "type = 0x%X, length = %d\n", cfgidx,
+		    config->desc.bDescriptorType, config->desc.bLength);
+		return -EINVAL;
+	}
+	cfgno = config->desc.bConfigurationValue;
+
+	buffer += config->desc.bLength;
+	size -= config->desc.bLength;
+
+	nintf = nintf_orig = config->desc.bNumInterfaces;
+	if (nintf > USB_MAXINTERFACES) {
+		dev_warn(ddev, "config %d has too many interfaces: %d, "
+		    "using maximum allowed: %d\n",
+		    cfgno, nintf, USB_MAXINTERFACES);
+		nintf = USB_MAXINTERFACES;
+	}
+
+	/* Go through the descriptors, checking their length and counting the
+	 * number of altsettings for each interface */
+	n = 0;
+	for ((buffer2 = buffer, size2 = size);
+	      size2 > 0;
+	     (buffer2 += header->bLength, size2 -= header->bLength)) {
+
+		if (size2 < sizeof(struct usb_descriptor_header)) {
+			dev_warn(ddev, "config %d descriptor has %d excess "
+			    "byte%s, ignoring\n",
+			    cfgno, size2, plural(size2));
+			break;
+		}
+
+		header = (struct usb_descriptor_header *) buffer2;
+		if ((header->bLength > size2) || (header->bLength < 2)) {
+			dev_warn(ddev, "config %d has an invalid descriptor "
+			    "of length %d, skipping remainder of the config\n",
+			    cfgno, header->bLength);
+			break;
+		}
+
+		if (header->bDescriptorType == USB_DT_INTERFACE) {
+			struct usb_interface_descriptor *d;
+			int inum;
+
+			d = (struct usb_interface_descriptor *) header;
+			if (d->bLength < USB_DT_INTERFACE_SIZE) {
+				dev_warn(ddev, "config %d has an invalid "
+				    "interface descriptor of length %d, "
+				    "skipping\n", cfgno, d->bLength);
+				continue;
+			}
+
+			inum = d->bInterfaceNumber;
+
+			if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) &&
+			    n >= nintf_orig) {
+				dev_warn(ddev, "config %d has more interface "
+				    "descriptors, than it declares in "
+				    "bNumInterfaces, ignoring interface "
+				    "number: %d\n", cfgno, inum);
+				continue;
+			}
+
+			if (inum >= nintf_orig)
+				dev_warn(ddev, "config %d has an invalid "
+				    "interface number: %d but max is %d\n",
+				    cfgno, inum, nintf_orig - 1);
+
+			/* Have we already encountered this interface?
+			 * Count its altsettings */
+			for (i = 0; i < n; ++i) {
+				if (inums[i] == inum)
+					break;
+			}
+			if (i < n) {
+				if (nalts[i] < 255)
+					++nalts[i];
+			} else if (n < USB_MAXINTERFACES) {
+				inums[n] = inum;
+				nalts[n] = 1;
+				++n;
+			}
+
+		} else if (header->bDescriptorType ==
+				USB_DT_INTERFACE_ASSOCIATION) {
+			if (iad_num == USB_MAXIADS) {
+				dev_warn(ddev, "found more Interface "
+					       "Association Descriptors "
+					       "than allocated for in "
+					       "configuration %d\n", cfgno);
+			} else {
+				config->intf_assoc[iad_num] =
+					(struct usb_interface_assoc_descriptor
+					*)header;
+				iad_num++;
+			}
+
+		} else if (header->bDescriptorType == USB_DT_DEVICE ||
+			    header->bDescriptorType == USB_DT_CONFIG)
+			dev_warn(ddev, "config %d contains an unexpected "
+			    "descriptor of type 0x%X, skipping\n",
+			    cfgno, header->bDescriptorType);
+
+	}	/* for ((buffer2 = buffer, size2 = size); ...) */
+	size = buffer2 - buffer;
+	config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
+
+	if (n != nintf)
+		dev_warn(ddev, "config %d has %d interface%s, different from "
+		    "the descriptor's value: %d\n",
+		    cfgno, n, plural(n), nintf_orig);
+	else if (n == 0)
+		dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
+	config->desc.bNumInterfaces = nintf = n;
+
+	/* Check for missing interface numbers */
+	for (i = 0; i < nintf; ++i) {
+		for (j = 0; j < nintf; ++j) {
+			if (inums[j] == i)
+				break;
+		}
+		if (j >= nintf)
+			dev_warn(ddev, "config %d has no interface number "
+			    "%d\n", cfgno, i);
+	}
+
+	/* Allocate the usb_interface_caches and altsetting arrays */
+	for (i = 0; i < nintf; ++i) {
+		j = nalts[i];
+		if (j > USB_MAXALTSETTING) {
+			dev_warn(ddev, "too many alternate settings for "
+			    "config %d interface %d: %d, "
+			    "using maximum allowed: %d\n",
+			    cfgno, inums[i], j, USB_MAXALTSETTING);
+			nalts[i] = j = USB_MAXALTSETTING;
+		}
+
+		len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
+		config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
+		if (!intfc)
+			return -ENOMEM;
+		kref_init(&intfc->ref);
+	}
+
+	/* FIXME: parse the BOS descriptor */
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the first interface descriptor */
+	config->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
+	    USB_DT_INTERFACE, &n);
+	config->extralen = i;
+	if (n > 0)
+		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
+		    n, plural(n), "configuration");
+	buffer += i;
+	size -= i;
+
+	/* Parse all the interface/altsetting descriptors */
+	while (size > 0) {
+		retval = usb_parse_interface(ddev, cfgno, config,
+		    buffer, size, inums, nalts);
+		if (retval < 0)
+			return retval;
+
+		buffer += retval;
+		size -= retval;
+	}
+
+	/* Check for missing altsettings */
+	for (i = 0; i < nintf; ++i) {
+		intfc = config->intf_cache[i];
+		for (j = 0; j < intfc->num_altsetting; ++j) {
+			for (n = 0; n < intfc->num_altsetting; ++n) {
+				if (intfc->altsetting[n].desc.
+				    bAlternateSetting == j)
+					break;
+			}
+			if (n >= intfc->num_altsetting)
+				dev_warn(ddev, "config %d interface %d has no "
+				    "altsetting %d\n", cfgno, inums[i], j);
+		}
+	}
+
+	return 0;
+}
+
+/* hub-only!! ... and only exported for reset/reinit path.
+ * otherwise used internally on disconnect/destroy path
+ */
+void usb_destroy_configuration(struct usb_device *dev)
+{
+	int c, i;
+
+	if (!dev->config)
+		return;
+
+	if (dev->rawdescriptors) {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++)
+			kfree(dev->rawdescriptors[i]);
+
+		kfree(dev->rawdescriptors);
+		dev->rawdescriptors = NULL;
+	}
+
+	for (c = 0; c < dev->descriptor.bNumConfigurations; c++) {
+		struct usb_host_config *cf = &dev->config[c];
+
+		kfree(cf->string);
+		for (i = 0; i < cf->desc.bNumInterfaces; i++) {
+			if (cf->intf_cache[i])
+				kref_put(&cf->intf_cache[i]->ref,
+					  usb_release_interface_cache);
+		}
+	}
+	kfree(dev->config);
+	dev->config = NULL;
+}
+
+
+/*
+ * Get the USB config descriptors, cache and parse'em
+ *
+ * hub-only!! ... and only in reset path, or usb_new_device()
+ * (used by real hubs and virtual root hubs)
+ */
+int usb_get_configuration(struct usb_device *dev)
+{
+	struct device *ddev = &dev->dev;
+	int ncfg = dev->descriptor.bNumConfigurations;
+	int result = 0;
+	unsigned int cfgno, length;
+	unsigned char *bigbuffer;
+	struct usb_config_descriptor *desc;
+
+	cfgno = 0;
+	result = -ENOMEM;
+	if (ncfg > USB_MAXCONFIG) {
+		dev_warn(ddev, "too many configurations: %d, "
+		    "using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
+		dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
+	}
+
+	if (ncfg < 1) {
+		dev_err(ddev, "no configurations\n");
+		return -EINVAL;
+	}
+
+	length = ncfg * sizeof(struct usb_host_config);
+	dev->config = kzalloc(length, GFP_KERNEL);
+	if (!dev->config)
+		goto err2;
+
+	length = ncfg * sizeof(char *);
+	dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
+	if (!dev->rawdescriptors)
+		goto err2;
+
+	desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
+	if (!desc)
+		goto err2;
+
+	result = 0;
+	for (; cfgno < ncfg; cfgno++) {
+		/* We grab just the first descriptor so we know how long
+		 * the whole configuration is */
+		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
+		    desc, USB_DT_CONFIG_SIZE);
+		if (result < 0) {
+			dev_err(ddev, "unable to read config index %d "
+			    "descriptor/%s: %d\n", cfgno, "start", result);
+			if (result != -EPIPE)
+				goto err;
+			dev_err(ddev, "chopping to %d config(s)\n", cfgno);
+			dev->descriptor.bNumConfigurations = cfgno;
+			break;
+		} else if (result < 4) {
+			dev_err(ddev, "config index %d descriptor too short "
+			    "(expected %i, got %i)\n", cfgno,
+			    USB_DT_CONFIG_SIZE, result);
+			result = -EINVAL;
+			goto err;
+		}
+		length = max((int) le16_to_cpu(desc->wTotalLength),
+		    USB_DT_CONFIG_SIZE);
+
+		/* Now that we know the length, get the whole thing */
+		bigbuffer = kmalloc(length, GFP_KERNEL);
+		if (!bigbuffer) {
+			result = -ENOMEM;
+			goto err;
+		}
+
+		if (dev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(100);
+
+		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
+		    bigbuffer, length);
+		if (result < 0) {
+			dev_err(ddev, "unable to read config index %d "
+			    "descriptor/%s\n", cfgno, "all");
+			kfree(bigbuffer);
+			goto err;
+		}
+		if (result < length) {
+			dev_warn(ddev, "config index %d descriptor too short "
+			    "(expected %i, got %i)\n", cfgno, length, result);
+			length = result;
+		}
+
+		dev->rawdescriptors[cfgno] = bigbuffer;
+
+		result = usb_parse_configuration(dev, cfgno,
+		    &dev->config[cfgno], bigbuffer, length);
+		if (result < 0) {
+			++cfgno;
+			goto err;
+		}
+	}
+	result = 0;
+
+err:
+	kfree(desc);
+	dev->descriptor.bNumConfigurations = cfgno;
+err2:
+	if (result == -ENOMEM)
+		dev_err(ddev, "out of memory\n");
+	return result;
+}
+
+void usb_release_bos_descriptor(struct usb_device *dev)
+{
+	if (dev->bos) {
+		kfree(dev->bos->desc);
+		kfree(dev->bos);
+		dev->bos = NULL;
+	}
+}
+
+/* Get BOS descriptor set */
+int usb_get_bos_descriptor(struct usb_device *dev)
+{
+	struct device *ddev = &dev->dev;
+	struct usb_bos_descriptor *bos;
+	struct usb_dev_cap_header *cap;
+	unsigned char *buffer;
+	int length, total_len, num, i;
+	int ret;
+
+	bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
+	if (!bos)
+		return -ENOMEM;
+
+	/* Get BOS descriptor */
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
+	if (ret < USB_DT_BOS_SIZE) {
+		dev_err(ddev, "unable to get BOS descriptor\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		kfree(bos);
+		return ret;
+	}
+
+	length = bos->bLength;
+	total_len = le16_to_cpu(bos->wTotalLength);
+	num = bos->bNumDeviceCaps;
+	kfree(bos);
+	if (total_len < length)
+		return -EINVAL;
+
+	dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL);
+	if (!dev->bos)
+		return -ENOMEM;
+
+	/* Now let's get the whole BOS descriptor set */
+	buffer = kzalloc(total_len, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	dev->bos->desc = (struct usb_bos_descriptor *)buffer;
+
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
+	if (ret < total_len) {
+		dev_err(ddev, "unable to get BOS descriptor set\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		goto err;
+	}
+	total_len -= length;
+
+	for (i = 0; i < num; i++) {
+		buffer += length;
+		cap = (struct usb_dev_cap_header *)buffer;
+		length = cap->bLength;
+
+		if (total_len < length)
+			break;
+		total_len -= length;
+
+		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
+			dev_warn(ddev, "descriptor type invalid, skip\n");
+			continue;
+		}
+
+		switch (cap->bDevCapabilityType) {
+		case USB_CAP_TYPE_WIRELESS_USB:
+			/* Wireless USB cap descriptor is handled by wusb */
+			break;
+		case USB_CAP_TYPE_EXT:
+			dev->bos->ext_cap =
+				(struct usb_ext_cap_descriptor *)buffer;
+			break;
+		case USB_SS_CAP_TYPE:
+			dev->bos->ss_cap =
+				(struct usb_ss_cap_descriptor *)buffer;
+			break;
+		case CONTAINER_ID_TYPE:
+			dev->bos->ss_id =
+				(struct usb_ss_container_id_descriptor *)buffer;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+
+err:
+	usb_release_bos_descriptor(dev);
+	return ret;
+}
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
new file mode 100644
index 000000000..2a3bbdf7e
--- /dev/null
+++ b/drivers/usb/core/devices.c
@@ -0,0 +1,692 @@
+/*
+ * devices.c
+ * (C) Copyright 1999 Randy Dunlap.
+ * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>.
+ *     (proc file per device)
+ * (C) Copyright 1999 Deti Fliegl (new USB architecture)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *************************************************************
+ *
+ * <mountpoint>/devices contains USB topology, device, config, class,
+ * interface, & endpoint data.
+ *
+ * I considered using /proc/bus/usb/devices/device# for each device
+ * as it is attached or detached, but I didn't like this for some
+ * reason -- maybe it's just too deep of a directory structure.
+ * I also don't like looking in multiple places to gather and view
+ * the data.  Having only one file for ./devices also prevents race
+ * conditions that could arise if a program was reading device info
+ * for devices that are being removed (unplugged).  (That is, the
+ * program may find a directory for devnum_12 then try to open it,
+ * but it was just unplugged, so the directory is now deleted.
+ * But programs would just have to be prepared for situations like
+ * this in any plug-and-play environment.)
+ *
+ * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Converted the whole proc stuff to real
+ *   read methods. Now not the whole device list needs to fit
+ *   into one page, only the device list for one bus.
+ *   Added a poll method to /proc/bus/usb/devices, to wake
+ *   up an eventual usbd
+ * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch>
+ *   Turned into its own filesystem
+ * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
+ *   Converted file reading routine to dump to buffer once
+ *   per device, not per bus
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "usb.h"
+
+/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
+#define ALLOW_SERIAL_NUMBER
+
+static const char format_topo[] =
+/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */
+"\nT:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n";
+
+static const char format_string_manufacturer[] =
+/* S:  Manufacturer=xxxx */
+  "S:  Manufacturer=%.100s\n";
+
+static const char format_string_product[] =
+/* S:  Product=xxxx */
+  "S:  Product=%.100s\n";
+
+#ifdef ALLOW_SERIAL_NUMBER
+static const char format_string_serialnumber[] =
+/* S:  SerialNumber=xxxx */
+  "S:  SerialNumber=%.100s\n";
+#endif
+
+static const char format_bandwidth[] =
+/* B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */
+  "B:  Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";
+
+static const char format_device1[] =
+/* D:  Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */
+  "D:  Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";
+
+static const char format_device2[] =
+/* P:  Vendor=xxxx ProdID=xxxx Rev=xx.xx */
+  "P:  Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";
+
+static const char format_config[] =
+/* C:  #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */
+  "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";
+
+static const char format_iad[] =
+/* A:  FirstIf#=dd IfCount=dd Cls=xx(sssss) Sub=xx Prot=xx */
+  "A:  FirstIf#=%2d IfCount=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x\n";
+
+static const char format_iface[] =
+/* I:  If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
+  "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
+
+static const char format_endpt[] =
+/* E:  Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */
+  "E:  Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n";
+
+
+/*
+ * Need access to the driver and USB bus lists.
+ * extern struct list_head usb_bus_list;
+ * However, these will come from functions that return ptrs to each of them.
+ */
+
+/*
+ * Wait for an connect/disconnect event to happen. We initialize
+ * the event counter with an odd number, and each event will increment
+ * the event counter by two, so it will always _stay_ odd. That means
+ * that it will never be zero, so "event 0" will never match a current
+ * event, and thus 'poll' will always trigger as readable for the first
+ * time it gets called.
+ */
+static struct device_connect_event {
+	atomic_t count;
+	wait_queue_head_t wait;
+} device_event = {
+	.count = ATOMIC_INIT(1),
+	.wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait)
+};
+
+struct class_info {
+	int class;
+	char *class_name;
+};
+
+static const struct class_info clas_info[] = {
+	/* max. 5 chars. per name string */
+	{USB_CLASS_PER_INTERFACE,	">ifc"},
+	{USB_CLASS_AUDIO,		"audio"},
+	{USB_CLASS_COMM,		"comm."},
+	{USB_CLASS_HID,			"HID"},
+	{USB_CLASS_PHYSICAL,		"PID"},
+	{USB_CLASS_STILL_IMAGE,		"still"},
+	{USB_CLASS_PRINTER,		"print"},
+	{USB_CLASS_MASS_STORAGE,	"stor."},
+	{USB_CLASS_HUB,			"hub"},
+	{USB_CLASS_CDC_DATA,		"data"},
+	{USB_CLASS_CSCID,		"scard"},
+	{USB_CLASS_CONTENT_SEC,		"c-sec"},
+	{USB_CLASS_VIDEO,		"video"},
+	{USB_CLASS_WIRELESS_CONTROLLER,	"wlcon"},
+	{USB_CLASS_MISC,		"misc"},
+	{USB_CLASS_APP_SPEC,		"app."},
+	{USB_CLASS_VENDOR_SPEC,		"vend."},
+	{-1,				"unk."}		/* leave as last */
+};
+
+/*****************************************************************/
+
+void usbfs_conn_disc_event(void)
+{
+	atomic_add(2, &device_event.count);
+	wake_up(&device_event.wait);
+}
+
+static const char *class_decode(const int class)
+{
+	int ix;
+
+	for (ix = 0; clas_info[ix].class != -1; ix++)
+		if (clas_info[ix].class == class)
+			break;
+	return clas_info[ix].class_name;
+}
+
+static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
+				const struct usb_endpoint_descriptor *desc)
+{
+	char dir, unit, *type;
+	unsigned interval, bandwidth = 1;
+
+	if (start > end)
+		return start;
+
+	dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
+
+	if (speed == USB_SPEED_HIGH) {
+		switch (usb_endpoint_maxp(desc) & (0x03 << 11)) {
+		case 1 << 11:
+			bandwidth = 2; break;
+		case 2 << 11:
+			bandwidth = 3; break;
+		}
+	}
+
+	/* this isn't checking for illegal values */
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		type = "Ctrl";
+		if (speed == USB_SPEED_HIGH)	/* uframes per NAK */
+			interval = desc->bInterval;
+		else
+			interval = 0;
+		dir = 'B';			/* ctrl is bidirectional */
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		type = "Isoc";
+		interval = 1 << (desc->bInterval - 1);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = "Bulk";
+		if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
+			interval = desc->bInterval;
+		else
+			interval = 0;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = "Int.";
+		if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
+			interval = 1 << (desc->bInterval - 1);
+		else
+			interval = desc->bInterval;
+		break;
+	default:	/* "can't happen" */
+		return start;
+	}
+	interval *= (speed == USB_SPEED_HIGH ||
+		     speed == USB_SPEED_SUPER) ? 125 : 1000;
+	if (interval % 1000)
+		unit = 'u';
+	else {
+		unit = 'm';
+		interval /= 1000;
+	}
+
+	start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,
+			 desc->bmAttributes, type,
+			 (usb_endpoint_maxp(desc) & 0x07ff) *
+			 bandwidth,
+			 interval, unit);
+	return start;
+}
+
+static char *usb_dump_interface_descriptor(char *start, char *end,
+					const struct usb_interface_cache *intfc,
+					const struct usb_interface *iface,
+					int setno)
+{
+	const struct usb_interface_descriptor *desc;
+	const char *driver_name = "";
+	int active = 0;
+
+	if (start > end)
+		return start;
+	desc = &intfc->altsetting[setno].desc;
+	if (iface) {
+		driver_name = (iface->dev.driver
+				? iface->dev.driver->name
+				: "(none)");
+		active = (desc == &iface->cur_altsetting->desc);
+	}
+	start += sprintf(start, format_iface,
+			 active ? '*' : ' ',	/* mark active altsetting */
+			 desc->bInterfaceNumber,
+			 desc->bAlternateSetting,
+			 desc->bNumEndpoints,
+			 desc->bInterfaceClass,
+			 class_decode(desc->bInterfaceClass),
+			 desc->bInterfaceSubClass,
+			 desc->bInterfaceProtocol,
+			 driver_name);
+	return start;
+}
+
+static char *usb_dump_interface(int speed, char *start, char *end,
+				const struct usb_interface_cache *intfc,
+				const struct usb_interface *iface, int setno)
+{
+	const struct usb_host_interface *desc = &intfc->altsetting[setno];
+	int i;
+
+	start = usb_dump_interface_descriptor(start, end, intfc, iface, setno);
+	for (i = 0; i < desc->desc.bNumEndpoints; i++) {
+		if (start > end)
+			return start;
+		start = usb_dump_endpoint_descriptor(speed,
+				start, end, &desc->endpoint[i].desc);
+	}
+	return start;
+}
+
+static char *usb_dump_iad_descriptor(char *start, char *end,
+			const struct usb_interface_assoc_descriptor *iad)
+{
+	if (start > end)
+		return start;
+	start += sprintf(start, format_iad,
+			 iad->bFirstInterface,
+			 iad->bInterfaceCount,
+			 iad->bFunctionClass,
+			 class_decode(iad->bFunctionClass),
+			 iad->bFunctionSubClass,
+			 iad->bFunctionProtocol);
+	return start;
+}
+
+/* TBD:
+ * 0. TBDs
+ * 1. marking active interface altsettings (code lists all, but should mark
+ *    which ones are active, if any)
+ */
+static char *usb_dump_config_descriptor(char *start, char *end,
+				const struct usb_config_descriptor *desc,
+				int active, int speed)
+{
+	int mul;
+
+	if (start > end)
+		return start;
+	if (speed == USB_SPEED_SUPER)
+		mul = 8;
+	else
+		mul = 2;
+	start += sprintf(start, format_config,
+			 /* mark active/actual/current cfg. */
+			 active ? '*' : ' ',
+			 desc->bNumInterfaces,
+			 desc->bConfigurationValue,
+			 desc->bmAttributes,
+			 desc->bMaxPower * mul);
+	return start;
+}
+
+static char *usb_dump_config(int speed, char *start, char *end,
+			     const struct usb_host_config *config, int active)
+{
+	int i, j;
+	struct usb_interface_cache *intfc;
+	struct usb_interface *interface;
+
+	if (start > end)
+		return start;
+	if (!config)
+		/* getting these some in 2.3.7; none in 2.3.6 */
+		return start + sprintf(start, "(null Cfg. desc.)\n");
+	start = usb_dump_config_descriptor(start, end, &config->desc, active,
+			speed);
+	for (i = 0; i < USB_MAXIADS; i++) {
+		if (config->intf_assoc[i] == NULL)
+			break;
+		start = usb_dump_iad_descriptor(start, end,
+					config->intf_assoc[i]);
+	}
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		intfc = config->intf_cache[i];
+		interface = config->interface[i];
+		for (j = 0; j < intfc->num_altsetting; j++) {
+			if (start > end)
+				return start;
+			start = usb_dump_interface(speed,
+				start, end, intfc, interface, j);
+		}
+	}
+	return start;
+}
+
+/*
+ * Dump the different USB descriptors.
+ */
+static char *usb_dump_device_descriptor(char *start, char *end,
+				const struct usb_device_descriptor *desc)
+{
+	u16 bcdUSB = le16_to_cpu(desc->bcdUSB);
+	u16 bcdDevice = le16_to_cpu(desc->bcdDevice);
+
+	if (start > end)
+		return start;
+	start += sprintf(start, format_device1,
+			  bcdUSB >> 8, bcdUSB & 0xff,
+			  desc->bDeviceClass,
+			  class_decode(desc->bDeviceClass),
+			  desc->bDeviceSubClass,
+			  desc->bDeviceProtocol,
+			  desc->bMaxPacketSize0,
+			  desc->bNumConfigurations);
+	if (start > end)
+		return start;
+	start += sprintf(start, format_device2,
+			 le16_to_cpu(desc->idVendor),
+			 le16_to_cpu(desc->idProduct),
+			 bcdDevice >> 8, bcdDevice & 0xff);
+	return start;
+}
+
+/*
+ * Dump the different strings that this device holds.
+ */
+static char *usb_dump_device_strings(char *start, char *end,
+				     struct usb_device *dev)
+{
+	if (start > end)
+		return start;
+	if (dev->manufacturer)
+		start += sprintf(start, format_string_manufacturer,
+				 dev->manufacturer);
+	if (start > end)
+		goto out;
+	if (dev->product)
+		start += sprintf(start, format_string_product, dev->product);
+	if (start > end)
+		goto out;
+#ifdef ALLOW_SERIAL_NUMBER
+	if (dev->serial)
+		start += sprintf(start, format_string_serialnumber,
+				 dev->serial);
+#endif
+ out:
+	return start;
+}
+
+static char *usb_dump_desc(char *start, char *end, struct usb_device *dev)
+{
+	int i;
+
+	if (start > end)
+		return start;
+
+	start = usb_dump_device_descriptor(start, end, &dev->descriptor);
+
+	if (start > end)
+		return start;
+
+	start = usb_dump_device_strings(start, end, dev);
+
+	for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+		if (start > end)
+			return start;
+		start = usb_dump_config(dev->speed,
+				start, end, dev->config + i,
+				/* active ? */
+				(dev->config + i) == dev->actconfig);
+	}
+	return start;
+}
+
+
+#ifdef PROC_EXTRA /* TBD: may want to add this code later */
+
+static char *usb_dump_hub_descriptor(char *start, char *end,
+				     const struct usb_hub_descriptor *desc)
+{
+	int leng = USB_DT_HUB_NONVAR_SIZE;
+	unsigned char *ptr = (unsigned char *)desc;
+
+	if (start > end)
+		return start;
+	start += sprintf(start, "Interface:");
+	while (leng && start <= end) {
+		start += sprintf(start, " %02x", *ptr);
+		ptr++; leng--;
+	}
+	*start++ = '\n';
+	return start;
+}
+
+static char *usb_dump_string(char *start, char *end,
+			     const struct usb_device *dev, char *id, int index)
+{
+	if (start > end)
+		return start;
+	start += sprintf(start, "Interface:");
+	if (index <= dev->maxstring && dev->stringindex &&
+	    dev->stringindex[index])
+		start += sprintf(start, "%s: %.100s ", id,
+				 dev->stringindex[index]);
+	return start;
+}
+
+#endif /* PROC_EXTRA */
+
+/*****************************************************************/
+
+/* This is a recursive function. Parameters:
+ * buffer - the user-space buffer to write data into
+ * nbytes - the maximum number of bytes to write
+ * skip_bytes - the number of bytes to skip before writing anything
+ * file_offset - the offset into the devices file on completion
+ * The caller must own the device lock.
+ */
+static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
+			       loff_t *skip_bytes, loff_t *file_offset,
+			       struct usb_device *usbdev, struct usb_bus *bus,
+			       int level, int index, int count)
+{
+	int chix;
+	int ret, cnt = 0;
+	int parent_devnum = 0;
+	char *pages_start, *data_end, *speed;
+	unsigned int length;
+	ssize_t total_written = 0;
+	struct usb_device *childdev = NULL;
+
+	/* don't bother with anything else if we're not writing any data */
+	if (*nbytes <= 0)
+		return 0;
+
+	if (level > MAX_TOPO_LEVEL)
+		return 0;
+	/* allocate 2^1 pages = 8K (on i386);
+	 * should be more than enough for one device */
+	pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
+	if (!pages_start)
+		return -ENOMEM;
+
+	if (usbdev->parent && usbdev->parent->devnum != -1)
+		parent_devnum = usbdev->parent->devnum;
+	/*
+	 * So the root hub's parent is 0 and any device that is
+	 * plugged into the root hub has a parent of 0.
+	 */
+	switch (usbdev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5"; break;
+	case USB_SPEED_UNKNOWN:		/* usb 1.1 root hub code */
+	case USB_SPEED_FULL:
+		speed = "12"; break;
+	case USB_SPEED_WIRELESS:	/* Wireless has no real fixed speed */
+	case USB_SPEED_HIGH:
+		speed = "480"; break;
+	case USB_SPEED_SUPER:
+		speed = "5000"; break;
+	default:
+		speed = "??";
+	}
+	data_end = pages_start + sprintf(pages_start, format_topo,
+			bus->busnum, level, parent_devnum,
+			index, count, usbdev->devnum,
+			speed, usbdev->maxchild);
+	/*
+	 * level = topology-tier level;
+	 * parent_devnum = parent device number;
+	 * index = parent's connector number;
+	 * count = device count at this level
+	 */
+	/* If this is the root hub, display the bandwidth information */
+	if (level == 0) {
+		int	max;
+
+		/* super/high speed reserves 80%, full/low reserves 90% */
+		if (usbdev->speed == USB_SPEED_HIGH ||
+		    usbdev->speed == USB_SPEED_SUPER)
+			max = 800;
+		else
+			max = FRAME_TIME_MAX_USECS_ALLOC;
+
+		/* report "average" periodic allocation over a microsecond.
+		 * the schedules are actually bursty, HCDs need to deal with
+		 * that and just compute/report this average.
+		 */
+		data_end += sprintf(data_end, format_bandwidth,
+				bus->bandwidth_allocated, max,
+				(100 * bus->bandwidth_allocated + max / 2)
+					/ max,
+				bus->bandwidth_int_reqs,
+				bus->bandwidth_isoc_reqs);
+
+	}
+	data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256,
+				 usbdev);
+
+	if (data_end > (pages_start + (2 * PAGE_SIZE) - 256))
+		data_end += sprintf(data_end, "(truncated)\n");
+
+	length = data_end - pages_start;
+	/* if we can start copying some data to the user */
+	if (length > *skip_bytes) {
+		length -= *skip_bytes;
+		if (length > *nbytes)
+			length = *nbytes;
+		if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) {
+			free_pages((unsigned long)pages_start, 1);
+			return -EFAULT;
+		}
+		*nbytes -= length;
+		*file_offset += length;
+		total_written += length;
+		*buffer += length;
+		*skip_bytes = 0;
+	} else
+		*skip_bytes -= length;
+
+	free_pages((unsigned long)pages_start, 1);
+
+	/* Now look at all of this device's children. */
+	usb_hub_for_each_child(usbdev, chix, childdev) {
+		usb_lock_device(childdev);
+		ret = usb_device_dump(buffer, nbytes, skip_bytes,
+				      file_offset, childdev, bus,
+				      level + 1, chix - 1, ++cnt);
+		usb_unlock_device(childdev);
+		if (ret == -EFAULT)
+			return total_written;
+		total_written += ret;
+	}
+	return total_written;
+}
+
+static ssize_t usb_device_read(struct file *file, char __user *buf,
+			       size_t nbytes, loff_t *ppos)
+{
+	struct usb_bus *bus;
+	ssize_t ret, total_written = 0;
+	loff_t skip_bytes = *ppos;
+
+	if (*ppos < 0)
+		return -EINVAL;
+	if (nbytes <= 0)
+		return 0;
+	if (!access_ok(VERIFY_WRITE, buf, nbytes))
+		return -EFAULT;
+
+	mutex_lock(&usb_bus_list_lock);
+	/* print devices for all busses */
+	list_for_each_entry(bus, &usb_bus_list, bus_list) {
+		/* recurse through all children of the root hub */
+		if (!bus_to_hcd(bus)->rh_registered)
+			continue;
+		usb_lock_device(bus->root_hub);
+		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,
+				      bus->root_hub, bus, 0, 0, 0);
+		usb_unlock_device(bus->root_hub);
+		if (ret < 0) {
+			mutex_unlock(&usb_bus_list_lock);
+			return ret;
+		}
+		total_written += ret;
+	}
+	mutex_unlock(&usb_bus_list_lock);
+	return total_written;
+}
+
+/* Kernel lock for "lastev" protection */
+static unsigned int usb_device_poll(struct file *file,
+				    struct poll_table_struct *wait)
+{
+	unsigned int event_count;
+
+	poll_wait(file, &device_event.wait, wait);
+
+	event_count = atomic_read(&device_event.count);
+	if (file->f_version != event_count) {
+		file->f_version = event_count;
+		return POLLIN | POLLRDNORM;
+	}
+
+	return 0;
+}
+
+static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret;
+
+	mutex_lock(&file_inode(file)->i_mutex);
+
+	switch (orig) {
+	case 0:
+		file->f_pos = offset;
+		ret = file->f_pos;
+		break;
+	case 1:
+		file->f_pos += offset;
+		ret = file->f_pos;
+		break;
+	case 2:
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&file_inode(file)->i_mutex);
+	return ret;
+}
+
+const struct file_operations usbfs_devices_fops = {
+	.llseek =	usb_device_lseek,
+	.read =		usb_device_read,
+	.poll =		usb_device_poll,
+};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
new file mode 100644
index 000000000..986abde07
--- /dev/null
+++ b/drivers/usb/core/devio.c
@@ -0,0 +1,2447 @@
+/*****************************************************************************/
+
+/*
+ *      devio.c  --  User space communication with USB devices.
+ *
+ *      Copyright (C) 1999-2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  This file implements the usbfs/x/y files, where
+ *  x is the bus number and y the device number.
+ *
+ *  It allows user space programs/"drivers" to communicate directly
+ *  with USB devices without intervening kernel driver.
+ *
+ *  Revision history
+ *    22.12.1999   0.1   Initial release (split from proc_usb.c)
+ *    04.01.2000   0.2   Turned into its own filesystem
+ *    30.09.2005   0.3   Fix user-triggerable oops in async URB delivery
+ *    			 (CAN-2005-3055)
+ */
+
+/*****************************************************************************/
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/signal.h>
+#include <linux/poll.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
+#include <linux/cdev.h>
+#include <linux/notifier.h>
+#include <linux/security.h>
+#include <linux/user_namespace.h>
+#include <linux/scatterlist.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+#include <linux/moduleparam.h>
+
+#include "usb.h"
+
+#define USB_MAXBUS			64
+#define USB_DEVICE_MAX			(USB_MAXBUS * 128)
+#define USB_SG_SIZE			16384 /* split-size for large txs */
+
+/* Mutual exclusion for removal, open, and release */
+DEFINE_MUTEX(usbfs_mutex);
+
+struct usb_dev_state {
+	struct list_head list;      /* state list */
+	struct usb_device *dev;
+	struct file *file;
+	spinlock_t lock;            /* protects the async urb lists */
+	struct list_head async_pending;
+	struct list_head async_completed;
+	wait_queue_head_t wait;     /* wake up if a request completed */
+	unsigned int discsignr;
+	struct pid *disc_pid;
+	const struct cred *cred;
+	void __user *disccontext;
+	unsigned long ifclaimed;
+	u32 secid;
+	u32 disabled_bulk_eps;
+};
+
+struct async {
+	struct list_head asynclist;
+	struct usb_dev_state *ps;
+	struct pid *pid;
+	const struct cred *cred;
+	unsigned int signr;
+	unsigned int ifnum;
+	void __user *userbuffer;
+	void __user *userurb;
+	struct urb *urb;
+	unsigned int mem_usage;
+	int status;
+	u32 secid;
+	u8 bulk_addr;
+	u8 bulk_status;
+};
+
+static bool usbfs_snoop;
+module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
+
+#define snoop(dev, format, arg...)				\
+	do {							\
+		if (usbfs_snoop)				\
+			dev_info(dev , format , ## arg);	\
+	} while (0)
+
+enum snoop_when {
+	SUBMIT, COMPLETE
+};
+
+#define USB_DEVICE_DEV		MKDEV(USB_DEVICE_MAJOR, 0)
+
+/* Limit on the total amount of memory we can allocate for transfers */
+static unsigned usbfs_memory_mb = 16;
+module_param(usbfs_memory_mb, uint, 0644);
+MODULE_PARM_DESC(usbfs_memory_mb,
+		"maximum MB allowed for usbfs buffers (0 = no limit)");
+
+/* Hard limit, necessary to avoid arithmetic overflow */
+#define USBFS_XFER_MAX		(UINT_MAX / 2 - 1000000)
+
+static atomic_t usbfs_memory_usage;	/* Total memory currently allocated */
+
+/* Check whether it's okay to allocate more memory for a transfer */
+static int usbfs_increase_memory_usage(unsigned amount)
+{
+	unsigned lim;
+
+	/*
+	 * Convert usbfs_memory_mb to bytes, avoiding overflows.
+	 * 0 means use the hard limit (effectively unlimited).
+	 */
+	lim = ACCESS_ONCE(usbfs_memory_mb);
+	if (lim == 0 || lim > (USBFS_XFER_MAX >> 20))
+		lim = USBFS_XFER_MAX;
+	else
+		lim <<= 20;
+
+	atomic_add(amount, &usbfs_memory_usage);
+	if (atomic_read(&usbfs_memory_usage) <= lim)
+		return 0;
+	atomic_sub(amount, &usbfs_memory_usage);
+	return -ENOMEM;
+}
+
+/* Memory for a transfer is being deallocated */
+static void usbfs_decrease_memory_usage(unsigned amount)
+{
+	atomic_sub(amount, &usbfs_memory_usage);
+}
+
+static int connected(struct usb_dev_state *ps)
+{
+	return (!list_empty(&ps->list) &&
+			ps->dev->state != USB_STATE_NOTATTACHED);
+}
+
+static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig)
+{
+	loff_t ret;
+
+	mutex_lock(&file_inode(file)->i_mutex);
+
+	switch (orig) {
+	case 0:
+		file->f_pos = offset;
+		ret = file->f_pos;
+		break;
+	case 1:
+		file->f_pos += offset;
+		ret = file->f_pos;
+		break;
+	case 2:
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&file_inode(file)->i_mutex);
+	return ret;
+}
+
+static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes,
+			   loff_t *ppos)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct usb_device *dev = ps->dev;
+	ssize_t ret = 0;
+	unsigned len;
+	loff_t pos;
+	int i;
+
+	pos = *ppos;
+	usb_lock_device(dev);
+	if (!connected(ps)) {
+		ret = -ENODEV;
+		goto err;
+	} else if (pos < 0) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (pos < sizeof(struct usb_device_descriptor)) {
+		/* 18 bytes - fits on the stack */
+		struct usb_device_descriptor temp_desc;
+
+		memcpy(&temp_desc, &dev->descriptor, sizeof(dev->descriptor));
+		le16_to_cpus(&temp_desc.bcdUSB);
+		le16_to_cpus(&temp_desc.idVendor);
+		le16_to_cpus(&temp_desc.idProduct);
+		le16_to_cpus(&temp_desc.bcdDevice);
+
+		len = sizeof(struct usb_device_descriptor) - pos;
+		if (len > nbytes)
+			len = nbytes;
+		if (copy_to_user(buf, ((char *)&temp_desc) + pos, len)) {
+			ret = -EFAULT;
+			goto err;
+		}
+
+		*ppos += len;
+		buf += len;
+		nbytes -= len;
+		ret += len;
+	}
+
+	pos = sizeof(struct usb_device_descriptor);
+	for (i = 0; nbytes && i < dev->descriptor.bNumConfigurations; i++) {
+		struct usb_config_descriptor *config =
+			(struct usb_config_descriptor *)dev->rawdescriptors[i];
+		unsigned int length = le16_to_cpu(config->wTotalLength);
+
+		if (*ppos < pos + length) {
+
+			/* The descriptor may claim to be longer than it
+			 * really is.  Here is the actual allocated length. */
+			unsigned alloclen =
+				le16_to_cpu(dev->config[i].desc.wTotalLength);
+
+			len = length - (*ppos - pos);
+			if (len > nbytes)
+				len = nbytes;
+
+			/* Simply don't write (skip over) unallocated parts */
+			if (alloclen > (*ppos - pos)) {
+				alloclen -= (*ppos - pos);
+				if (copy_to_user(buf,
+				    dev->rawdescriptors[i] + (*ppos - pos),
+				    min(len, alloclen))) {
+					ret = -EFAULT;
+					goto err;
+				}
+			}
+
+			*ppos += len;
+			buf += len;
+			nbytes -= len;
+			ret += len;
+		}
+
+		pos += length;
+	}
+
+err:
+	usb_unlock_device(dev);
+	return ret;
+}
+
+/*
+ * async list handling
+ */
+
+static struct async *alloc_async(unsigned int numisoframes)
+{
+	struct async *as;
+
+	as = kzalloc(sizeof(struct async), GFP_KERNEL);
+	if (!as)
+		return NULL;
+	as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL);
+	if (!as->urb) {
+		kfree(as);
+		return NULL;
+	}
+	return as;
+}
+
+static void free_async(struct async *as)
+{
+	int i;
+
+	put_pid(as->pid);
+	if (as->cred)
+		put_cred(as->cred);
+	for (i = 0; i < as->urb->num_sgs; i++) {
+		if (sg_page(&as->urb->sg[i]))
+			kfree(sg_virt(&as->urb->sg[i]));
+	}
+	kfree(as->urb->sg);
+	kfree(as->urb->transfer_buffer);
+	kfree(as->urb->setup_packet);
+	usb_free_urb(as->urb);
+	usbfs_decrease_memory_usage(as->mem_usage);
+	kfree(as);
+}
+
+static void async_newpending(struct async *as)
+{
+	struct usb_dev_state *ps = as->ps;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_add_tail(&as->asynclist, &ps->async_pending);
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static void async_removepending(struct async *as)
+{
+	struct usb_dev_state *ps = as->ps;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	list_del_init(&as->asynclist);
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static struct async *async_getcompleted(struct usb_dev_state *ps)
+{
+	unsigned long flags;
+	struct async *as = NULL;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	if (!list_empty(&ps->async_completed)) {
+		as = list_entry(ps->async_completed.next, struct async,
+				asynclist);
+		list_del_init(&as->asynclist);
+	}
+	spin_unlock_irqrestore(&ps->lock, flags);
+	return as;
+}
+
+static struct async *async_getpending(struct usb_dev_state *ps,
+					     void __user *userurb)
+{
+	struct async *as;
+
+	list_for_each_entry(as, &ps->async_pending, asynclist)
+		if (as->userurb == userurb) {
+			list_del_init(&as->asynclist);
+			return as;
+		}
+
+	return NULL;
+}
+
+static void snoop_urb(struct usb_device *udev,
+		void __user *userurb, int pipe, unsigned length,
+		int timeout_or_status, enum snoop_when when,
+		unsigned char *data, unsigned data_len)
+{
+	static const char *types[] = {"isoc", "int", "ctrl", "bulk"};
+	static const char *dirs[] = {"out", "in"};
+	int ep;
+	const char *t, *d;
+
+	if (!usbfs_snoop)
+		return;
+
+	ep = usb_pipeendpoint(pipe);
+	t = types[usb_pipetype(pipe)];
+	d = dirs[!!usb_pipein(pipe)];
+
+	if (userurb) {		/* Async */
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+					"length %u\n",
+					userurb, ep, t, d, length);
+		else
+			dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+					"actual_length %u status %d\n",
+					userurb, ep, t, d, length,
+					timeout_or_status);
+	} else {
+		if (when == SUBMIT)
+			dev_info(&udev->dev, "ep%d %s-%s, length %u, "
+					"timeout %d\n",
+					ep, t, d, length, timeout_or_status);
+		else
+			dev_info(&udev->dev, "ep%d %s-%s, actual_length %u, "
+					"status %d\n",
+					ep, t, d, length, timeout_or_status);
+	}
+
+	if (data && data_len > 0) {
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			data, data_len, 1);
+	}
+}
+
+static void snoop_urb_data(struct urb *urb, unsigned len)
+{
+	int i, size;
+
+	if (!usbfs_snoop)
+		return;
+
+	if (urb->num_sgs == 0) {
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			urb->transfer_buffer, len, 1);
+		return;
+	}
+
+	for (i = 0; i < urb->num_sgs && len; i++) {
+		size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len;
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
+			sg_virt(&urb->sg[i]), size, 1);
+		len -= size;
+	}
+}
+
+static int copy_urb_data_to_user(u8 __user *userbuffer, struct urb *urb)
+{
+	unsigned i, len, size;
+
+	if (urb->number_of_packets > 0)		/* Isochronous */
+		len = urb->transfer_buffer_length;
+	else					/* Non-Isoc */
+		len = urb->actual_length;
+
+	if (urb->num_sgs == 0) {
+		if (copy_to_user(userbuffer, urb->transfer_buffer, len))
+			return -EFAULT;
+		return 0;
+	}
+
+	for (i = 0; i < urb->num_sgs && len; i++) {
+		size = (len > USB_SG_SIZE) ? USB_SG_SIZE : len;
+		if (copy_to_user(userbuffer, sg_virt(&urb->sg[i]), size))
+			return -EFAULT;
+		userbuffer += size;
+		len -= size;
+	}
+
+	return 0;
+}
+
+#define AS_CONTINUATION	1
+#define AS_UNLINK	2
+
+static void cancel_bulk_urbs(struct usb_dev_state *ps, unsigned bulk_addr)
+__releases(ps->lock)
+__acquires(ps->lock)
+{
+	struct urb *urb;
+	struct async *as;
+
+	/* Mark all the pending URBs that match bulk_addr, up to but not
+	 * including the first one without AS_CONTINUATION.  If such an
+	 * URB is encountered then a new transfer has already started so
+	 * the endpoint doesn't need to be disabled; otherwise it does.
+	 */
+	list_for_each_entry(as, &ps->async_pending, asynclist) {
+		if (as->bulk_addr == bulk_addr) {
+			if (as->bulk_status != AS_CONTINUATION)
+				goto rescan;
+			as->bulk_status = AS_UNLINK;
+			as->bulk_addr = 0;
+		}
+	}
+	ps->disabled_bulk_eps |= (1 << bulk_addr);
+
+	/* Now carefully unlink all the marked pending URBs */
+ rescan:
+	list_for_each_entry(as, &ps->async_pending, asynclist) {
+		if (as->bulk_status == AS_UNLINK) {
+			as->bulk_status = 0;		/* Only once */
+			urb = as->urb;
+			usb_get_urb(urb);
+			spin_unlock(&ps->lock);		/* Allow completions */
+			usb_unlink_urb(urb);
+			usb_put_urb(urb);
+			spin_lock(&ps->lock);
+			goto rescan;
+		}
+	}
+}
+
+static void async_completed(struct urb *urb)
+{
+	struct async *as = urb->context;
+	struct usb_dev_state *ps = as->ps;
+	struct siginfo sinfo;
+	struct pid *pid = NULL;
+	u32 secid = 0;
+	const struct cred *cred = NULL;
+	int signr;
+
+	spin_lock(&ps->lock);
+	list_move_tail(&as->asynclist, &ps->async_completed);
+	as->status = urb->status;
+	signr = as->signr;
+	if (signr) {
+		memset(&sinfo, 0, sizeof(sinfo));
+		sinfo.si_signo = as->signr;
+		sinfo.si_errno = as->status;
+		sinfo.si_code = SI_ASYNCIO;
+		sinfo.si_addr = as->userurb;
+		pid = get_pid(as->pid);
+		cred = get_cred(as->cred);
+		secid = as->secid;
+	}
+	snoop(&urb->dev->dev, "urb complete\n");
+	snoop_urb(urb->dev, as->userurb, urb->pipe, urb->actual_length,
+			as->status, COMPLETE, NULL, 0);
+	if ((urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN)
+		snoop_urb_data(urb, urb->actual_length);
+
+	if (as->status < 0 && as->bulk_addr && as->status != -ECONNRESET &&
+			as->status != -ENOENT)
+		cancel_bulk_urbs(ps, as->bulk_addr);
+	spin_unlock(&ps->lock);
+
+	if (signr) {
+		kill_pid_info_as_cred(sinfo.si_signo, &sinfo, pid, cred, secid);
+		put_pid(pid);
+		put_cred(cred);
+	}
+
+	wake_up(&ps->wait);
+}
+
+static void destroy_async(struct usb_dev_state *ps, struct list_head *list)
+{
+	struct urb *urb;
+	struct async *as;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	while (!list_empty(list)) {
+		as = list_entry(list->next, struct async, asynclist);
+		list_del_init(&as->asynclist);
+		urb = as->urb;
+		usb_get_urb(urb);
+
+		/* drop the spinlock so the completion handler can run */
+		spin_unlock_irqrestore(&ps->lock, flags);
+		usb_kill_urb(urb);
+		usb_put_urb(urb);
+		spin_lock_irqsave(&ps->lock, flags);
+	}
+	spin_unlock_irqrestore(&ps->lock, flags);
+}
+
+static void destroy_async_on_interface(struct usb_dev_state *ps,
+				       unsigned int ifnum)
+{
+	struct list_head *p, *q, hitlist;
+	unsigned long flags;
+
+	INIT_LIST_HEAD(&hitlist);
+	spin_lock_irqsave(&ps->lock, flags);
+	list_for_each_safe(p, q, &ps->async_pending)
+		if (ifnum == list_entry(p, struct async, asynclist)->ifnum)
+			list_move_tail(p, &hitlist);
+	spin_unlock_irqrestore(&ps->lock, flags);
+	destroy_async(ps, &hitlist);
+}
+
+static void destroy_all_async(struct usb_dev_state *ps)
+{
+	destroy_async(ps, &ps->async_pending);
+}
+
+/*
+ * interface claims are made only at the request of user level code,
+ * which can also release them (explicitly or by closing files).
+ * they're also undone when devices disconnect.
+ */
+
+static int driver_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return -ENODEV;
+}
+
+static void driver_disconnect(struct usb_interface *intf)
+{
+	struct usb_dev_state *ps = usb_get_intfdata(intf);
+	unsigned int ifnum = intf->altsetting->desc.bInterfaceNumber;
+
+	if (!ps)
+		return;
+
+	/* NOTE:  this relies on usbcore having canceled and completed
+	 * all pending I/O requests; 2.6 does that.
+	 */
+
+	if (likely(ifnum < 8*sizeof(ps->ifclaimed)))
+		clear_bit(ifnum, &ps->ifclaimed);
+	else
+		dev_warn(&intf->dev, "interface number %u out of range\n",
+			 ifnum);
+
+	usb_set_intfdata(intf, NULL);
+
+	/* force async requests to complete */
+	destroy_async_on_interface(ps, ifnum);
+}
+
+/* The following routines are merely placeholders.  There is no way
+ * to inform a user task about suspend or resumes.
+ */
+static int driver_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+	return 0;
+}
+
+static int driver_resume(struct usb_interface *intf)
+{
+	return 0;
+}
+
+struct usb_driver usbfs_driver = {
+	.name =		"usbfs",
+	.probe =	driver_probe,
+	.disconnect =	driver_disconnect,
+	.suspend =	driver_suspend,
+	.resume =	driver_resume,
+};
+
+static int claimintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	struct usb_device *dev = ps->dev;
+	struct usb_interface *intf;
+	int err;
+
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return -EINVAL;
+	/* already claimed */
+	if (test_bit(ifnum, &ps->ifclaimed))
+		return 0;
+
+	intf = usb_ifnum_to_if(dev, ifnum);
+	if (!intf)
+		err = -ENOENT;
+	else
+		err = usb_driver_claim_interface(&usbfs_driver, intf, ps);
+	if (err == 0)
+		set_bit(ifnum, &ps->ifclaimed);
+	return err;
+}
+
+static int releaseintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	struct usb_device *dev;
+	struct usb_interface *intf;
+	int err;
+
+	err = -EINVAL;
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return err;
+	dev = ps->dev;
+	intf = usb_ifnum_to_if(dev, ifnum);
+	if (!intf)
+		err = -ENOENT;
+	else if (test_and_clear_bit(ifnum, &ps->ifclaimed)) {
+		usb_driver_release_interface(&usbfs_driver, intf);
+		err = 0;
+	}
+	return err;
+}
+
+static int checkintf(struct usb_dev_state *ps, unsigned int ifnum)
+{
+	if (ps->dev->state != USB_STATE_CONFIGURED)
+		return -EHOSTUNREACH;
+	if (ifnum >= 8*sizeof(ps->ifclaimed))
+		return -EINVAL;
+	if (test_bit(ifnum, &ps->ifclaimed))
+		return 0;
+	/* if not yet claimed, claim it for the driver */
+	dev_warn(&ps->dev->dev, "usbfs: process %d (%s) did not claim "
+		 "interface %u before use\n", task_pid_nr(current),
+		 current->comm, ifnum);
+	return claimintf(ps, ifnum);
+}
+
+static int findintfep(struct usb_device *dev, unsigned int ep)
+{
+	unsigned int i, j, e;
+	struct usb_interface *intf;
+	struct usb_host_interface *alts;
+	struct usb_endpoint_descriptor *endpt;
+
+	if (ep & ~(USB_DIR_IN|0xf))
+		return -EINVAL;
+	if (!dev->actconfig)
+		return -ESRCH;
+	for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+		intf = dev->actconfig->interface[i];
+		for (j = 0; j < intf->num_altsetting; j++) {
+			alts = &intf->altsetting[j];
+			for (e = 0; e < alts->desc.bNumEndpoints; e++) {
+				endpt = &alts->endpoint[e].desc;
+				if (endpt->bEndpointAddress == ep)
+					return alts->desc.bInterfaceNumber;
+			}
+		}
+	}
+	return -ENOENT;
+}
+
+static int check_ctrlrecip(struct usb_dev_state *ps, unsigned int requesttype,
+			   unsigned int request, unsigned int index)
+{
+	int ret = 0;
+	struct usb_host_interface *alt_setting;
+
+	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
+	 && ps->dev->state != USB_STATE_ADDRESS
+	 && ps->dev->state != USB_STATE_CONFIGURED)
+		return -EHOSTUNREACH;
+	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
+		return 0;
+
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, which we always want to allow as it is used
+	 * to query things like ink level, etc.
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			return 0;
+	}
+
+	index &= 0xff;
+	switch (requesttype & USB_RECIP_MASK) {
+	case USB_RECIP_ENDPOINT:
+		if ((index & ~USB_DIR_IN) == 0)
+			return 0;
+		ret = findintfep(ps->dev, index);
+		if (ret < 0) {
+			/*
+			 * Some not fully compliant Win apps seem to get
+			 * index wrong and have the endpoint number here
+			 * rather than the endpoint address (with the
+			 * correct direction). Win does let this through,
+			 * so we'll not reject it here but leave it to
+			 * the device to not break KVM. But we warn.
+			 */
+			ret = findintfep(ps->dev, index ^ 0x80);
+			if (ret >= 0)
+				dev_info(&ps->dev->dev,
+					"%s: process %i (%s) requesting ep %02x but needs %02x\n",
+					__func__, task_pid_nr(current),
+					current->comm, index, index ^ 0x80);
+		}
+		if (ret >= 0)
+			ret = checkintf(ps, ret);
+		break;
+
+	case USB_RECIP_INTERFACE:
+		ret = checkintf(ps, index);
+		break;
+	}
+	return ret;
+}
+
+static struct usb_host_endpoint *ep_to_host_endpoint(struct usb_device *dev,
+						     unsigned char ep)
+{
+	if (ep & USB_ENDPOINT_DIR_MASK)
+		return dev->ep_in[ep & USB_ENDPOINT_NUMBER_MASK];
+	else
+		return dev->ep_out[ep & USB_ENDPOINT_NUMBER_MASK];
+}
+
+static int parse_usbdevfs_streams(struct usb_dev_state *ps,
+				  struct usbdevfs_streams __user *streams,
+				  unsigned int *num_streams_ret,
+				  unsigned int *num_eps_ret,
+				  struct usb_host_endpoint ***eps_ret,
+				  struct usb_interface **intf_ret)
+{
+	unsigned int i, num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf = NULL;
+	unsigned char ep;
+	int ifnum, ret;
+
+	if (get_user(num_streams, &streams->num_streams) ||
+	    get_user(num_eps, &streams->num_eps))
+		return -EFAULT;
+
+	if (num_eps < 1 || num_eps > USB_MAXENDPOINTS)
+		return -EINVAL;
+
+	/* The XHCI controller allows max 2 ^ 16 streams */
+	if (num_streams_ret && (num_streams < 2 || num_streams > 65536))
+		return -EINVAL;
+
+	eps = kmalloc(num_eps * sizeof(*eps), GFP_KERNEL);
+	if (!eps)
+		return -ENOMEM;
+
+	for (i = 0; i < num_eps; i++) {
+		if (get_user(ep, &streams->eps[i])) {
+			ret = -EFAULT;
+			goto error;
+		}
+		eps[i] = ep_to_host_endpoint(ps->dev, ep);
+		if (!eps[i]) {
+			ret = -EINVAL;
+			goto error;
+		}
+
+		/* usb_alloc/free_streams operate on an usb_interface */
+		ifnum = findintfep(ps->dev, ep);
+		if (ifnum < 0) {
+			ret = ifnum;
+			goto error;
+		}
+
+		if (i == 0) {
+			ret = checkintf(ps, ifnum);
+			if (ret < 0)
+				goto error;
+			intf = usb_ifnum_to_if(ps->dev, ifnum);
+		} else {
+			/* Verify all eps belong to the same interface */
+			if (ifnum != intf->altsetting->desc.bInterfaceNumber) {
+				ret = -EINVAL;
+				goto error;
+			}
+		}
+	}
+
+	if (num_streams_ret)
+		*num_streams_ret = num_streams;
+	*num_eps_ret = num_eps;
+	*eps_ret = eps;
+	*intf_ret = intf;
+
+	return 0;
+
+error:
+	kfree(eps);
+	return ret;
+}
+
+static int match_devt(struct device *dev, void *data)
+{
+	return dev->devt == (dev_t) (unsigned long) data;
+}
+
+static struct usb_device *usbdev_lookup_by_devt(dev_t devt)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&usb_bus_type, NULL,
+			      (void *) (unsigned long) devt, match_devt);
+	if (!dev)
+		return NULL;
+	return container_of(dev, struct usb_device, dev);
+}
+
+/*
+ * file operations
+ */
+static int usbdev_open(struct inode *inode, struct file *file)
+{
+	struct usb_device *dev = NULL;
+	struct usb_dev_state *ps;
+	int ret;
+
+	ret = -ENOMEM;
+	ps = kmalloc(sizeof(struct usb_dev_state), GFP_KERNEL);
+	if (!ps)
+		goto out_free_ps;
+
+	ret = -ENODEV;
+
+	/* Protect against simultaneous removal or release */
+	mutex_lock(&usbfs_mutex);
+
+	/* usbdev device-node */
+	if (imajor(inode) == USB_DEVICE_MAJOR)
+		dev = usbdev_lookup_by_devt(inode->i_rdev);
+
+	mutex_unlock(&usbfs_mutex);
+
+	if (!dev)
+		goto out_free_ps;
+
+	usb_lock_device(dev);
+	if (dev->state == USB_STATE_NOTATTACHED)
+		goto out_unlock_device;
+
+	ret = usb_autoresume_device(dev);
+	if (ret)
+		goto out_unlock_device;
+
+	ps->dev = dev;
+	ps->file = file;
+	spin_lock_init(&ps->lock);
+	INIT_LIST_HEAD(&ps->list);
+	INIT_LIST_HEAD(&ps->async_pending);
+	INIT_LIST_HEAD(&ps->async_completed);
+	init_waitqueue_head(&ps->wait);
+	ps->discsignr = 0;
+	ps->disc_pid = get_pid(task_pid(current));
+	ps->cred = get_current_cred();
+	ps->disccontext = NULL;
+	ps->ifclaimed = 0;
+	security_task_getsecid(current, &ps->secid);
+	smp_wmb();
+	list_add_tail(&ps->list, &dev->filelist);
+	file->private_data = ps;
+	usb_unlock_device(dev);
+	snoop(&dev->dev, "opened by process %d: %s\n", task_pid_nr(current),
+			current->comm);
+	return ret;
+
+ out_unlock_device:
+	usb_unlock_device(dev);
+	usb_put_dev(dev);
+ out_free_ps:
+	kfree(ps);
+	return ret;
+}
+
+static int usbdev_release(struct inode *inode, struct file *file)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct usb_device *dev = ps->dev;
+	unsigned int ifnum;
+	struct async *as;
+
+	usb_lock_device(dev);
+	usb_hub_release_all_ports(dev, ps);
+
+	list_del_init(&ps->list);
+
+	for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed);
+			ifnum++) {
+		if (test_bit(ifnum, &ps->ifclaimed))
+			releaseintf(ps, ifnum);
+	}
+	destroy_all_async(ps);
+	usb_autosuspend_device(dev);
+	usb_unlock_device(dev);
+	usb_put_dev(dev);
+	put_pid(ps->disc_pid);
+	put_cred(ps->cred);
+
+	as = async_getcompleted(ps);
+	while (as) {
+		free_async(as);
+		as = async_getcompleted(ps);
+	}
+	kfree(ps);
+	return 0;
+}
+
+static int proc_control(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usb_device *dev = ps->dev;
+	struct usbdevfs_ctrltransfer ctrl;
+	unsigned int tmo;
+	unsigned char *tbuf;
+	unsigned wLength;
+	int i, pipe, ret;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+			      ctrl.wIndex);
+	if (ret)
+		return ret;
+	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */
+	if (wLength > PAGE_SIZE)
+		return -EINVAL;
+	ret = usbfs_increase_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	if (ret)
+		return ret;
+	tbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!tbuf) {
+		ret = -ENOMEM;
+		goto done;
+	}
+	tmo = ctrl.timeout;
+	snoop(&dev->dev, "control urb: bRequestType=%02x "
+		"bRequest=%02x wValue=%04x "
+		"wIndex=%04x wLength=%04x\n",
+		ctrl.bRequestType, ctrl.bRequest, ctrl.wValue,
+		ctrl.wIndex, ctrl.wLength);
+	if (ctrl.bRequestType & 0x80) {
+		if (ctrl.wLength && !access_ok(VERIFY_WRITE, ctrl.data,
+					       ctrl.wLength)) {
+			ret = -EINVAL;
+			goto done;
+		}
+		pipe = usb_rcvctrlpipe(dev, 0);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT, NULL, 0);
+
+		usb_unlock_device(dev);
+		i = usb_control_msg(dev, pipe, ctrl.bRequest,
+				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
+				    tbuf, ctrl.wLength, tmo);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE,
+			  tbuf, max(i, 0));
+		if ((i > 0) && ctrl.wLength) {
+			if (copy_to_user(ctrl.data, tbuf, i)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	} else {
+		if (ctrl.wLength) {
+			if (copy_from_user(tbuf, ctrl.data, ctrl.wLength)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+		pipe = usb_sndctrlpipe(dev, 0);
+		snoop_urb(dev, NULL, pipe, ctrl.wLength, tmo, SUBMIT,
+			tbuf, ctrl.wLength);
+
+		usb_unlock_device(dev);
+		i = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ctrl.bRequest,
+				    ctrl.bRequestType, ctrl.wValue, ctrl.wIndex,
+				    tbuf, ctrl.wLength, tmo);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, max(i, 0), min(i, 0), COMPLETE, NULL, 0);
+	}
+	if (i < 0 && i != -EPIPE) {
+		dev_printk(KERN_DEBUG, &dev->dev, "usbfs: USBDEVFS_CONTROL "
+			   "failed cmd %s rqt %u rq %u len %u ret %d\n",
+			   current->comm, ctrl.bRequestType, ctrl.bRequest,
+			   ctrl.wLength, i);
+	}
+	ret = i;
+ done:
+	free_page((unsigned long) tbuf);
+	usbfs_decrease_memory_usage(PAGE_SIZE + sizeof(struct urb) +
+			sizeof(struct usb_ctrlrequest));
+	return ret;
+}
+
+static int proc_bulk(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usb_device *dev = ps->dev;
+	struct usbdevfs_bulktransfer bulk;
+	unsigned int tmo, len1, pipe;
+	int len2;
+	unsigned char *tbuf;
+	int i, ret;
+
+	if (copy_from_user(&bulk, arg, sizeof(bulk)))
+		return -EFAULT;
+	ret = findintfep(ps->dev, bulk.ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+	if (bulk.ep & USB_DIR_IN)
+		pipe = usb_rcvbulkpipe(dev, bulk.ep & 0x7f);
+	else
+		pipe = usb_sndbulkpipe(dev, bulk.ep & 0x7f);
+	if (!usb_maxpacket(dev, pipe, !(bulk.ep & USB_DIR_IN)))
+		return -EINVAL;
+	len1 = bulk.len;
+	if (len1 >= USBFS_XFER_MAX)
+		return -EINVAL;
+	ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
+	if (ret)
+		return ret;
+	if (!(tbuf = kmalloc(len1, GFP_KERNEL))) {
+		ret = -ENOMEM;
+		goto done;
+	}
+	tmo = bulk.timeout;
+	if (bulk.ep & 0x80) {
+		if (len1 && !access_ok(VERIFY_WRITE, bulk.data, len1)) {
+			ret = -EINVAL;
+			goto done;
+		}
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, NULL, 0);
+
+		usb_unlock_device(dev);
+		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, tbuf, len2);
+
+		if (!i && len2) {
+			if (copy_to_user(bulk.data, tbuf, len2)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	} else {
+		if (len1) {
+			if (copy_from_user(tbuf, bulk.data, len1)) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+		snoop_urb(dev, NULL, pipe, len1, tmo, SUBMIT, tbuf, len1);
+
+		usb_unlock_device(dev);
+		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
+		usb_lock_device(dev);
+		snoop_urb(dev, NULL, pipe, len2, i, COMPLETE, NULL, 0);
+	}
+	ret = (i < 0 ? i : len2);
+ done:
+	kfree(tbuf);
+	usbfs_decrease_memory_usage(len1 + sizeof(struct urb));
+	return ret;
+}
+
+static void check_reset_of_active_ep(struct usb_device *udev,
+		unsigned int epnum, char *ioctl_name)
+{
+	struct usb_host_endpoint **eps;
+	struct usb_host_endpoint *ep;
+
+	eps = (epnum & USB_DIR_IN) ? udev->ep_in : udev->ep_out;
+	ep = eps[epnum & 0x0f];
+	if (ep && !list_empty(&ep->urb_list))
+		dev_warn(&udev->dev, "Process %d (%s) called USBDEVFS_%s for active endpoint 0x%02x\n",
+				task_pid_nr(current), current->comm,
+				ioctl_name, epnum);
+}
+
+static int proc_resetep(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ep;
+	int ret;
+
+	if (get_user(ep, (unsigned int __user *)arg))
+		return -EFAULT;
+	ret = findintfep(ps->dev, ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "RESETEP");
+	usb_reset_endpoint(ps->dev, ep);
+	return 0;
+}
+
+static int proc_clearhalt(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ep;
+	int pipe;
+	int ret;
+
+	if (get_user(ep, (unsigned int __user *)arg))
+		return -EFAULT;
+	ret = findintfep(ps->dev, ep);
+	if (ret < 0)
+		return ret;
+	ret = checkintf(ps, ret);
+	if (ret)
+		return ret;
+	check_reset_of_active_ep(ps->dev, ep, "CLEAR_HALT");
+	if (ep & USB_DIR_IN)
+		pipe = usb_rcvbulkpipe(ps->dev, ep & 0x7f);
+	else
+		pipe = usb_sndbulkpipe(ps->dev, ep & 0x7f);
+
+	return usb_clear_halt(ps->dev, pipe);
+}
+
+static int proc_getdriver(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_getdriver gd;
+	struct usb_interface *intf;
+	int ret;
+
+	if (copy_from_user(&gd, arg, sizeof(gd)))
+		return -EFAULT;
+	intf = usb_ifnum_to_if(ps->dev, gd.interface);
+	if (!intf || !intf->dev.driver)
+		ret = -ENODATA;
+	else {
+		strlcpy(gd.driver, intf->dev.driver->name,
+				sizeof(gd.driver));
+		ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0);
+	}
+	return ret;
+}
+
+static int proc_connectinfo(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_connectinfo ci = {
+		.devnum = ps->dev->devnum,
+		.slow = ps->dev->speed == USB_SPEED_LOW
+	};
+
+	if (copy_to_user(arg, &ci, sizeof(ci)))
+		return -EFAULT;
+	return 0;
+}
+
+static int proc_resetdevice(struct usb_dev_state *ps)
+{
+	return usb_reset_device(ps->dev);
+}
+
+static int proc_setintf(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_setinterface setintf;
+	int ret;
+
+	if (copy_from_user(&setintf, arg, sizeof(setintf)))
+		return -EFAULT;
+	if ((ret = checkintf(ps, setintf.interface)))
+		return ret;
+
+	destroy_async_on_interface(ps, setintf.interface);
+
+	return usb_set_interface(ps->dev, setintf.interface,
+			setintf.altsetting);
+}
+
+static int proc_setconfig(struct usb_dev_state *ps, void __user *arg)
+{
+	int u;
+	int status = 0;
+	struct usb_host_config *actconfig;
+
+	if (get_user(u, (int __user *)arg))
+		return -EFAULT;
+
+	actconfig = ps->dev->actconfig;
+
+	/* Don't touch the device if any interfaces are claimed.
+	 * It could interfere with other drivers' operations, and if
+	 * an interface is claimed by usbfs it could easily deadlock.
+	 */
+	if (actconfig) {
+		int i;
+
+		for (i = 0; i < actconfig->desc.bNumInterfaces; ++i) {
+			if (usb_interface_claimed(actconfig->interface[i])) {
+				dev_warn(&ps->dev->dev,
+					"usbfs: interface %d claimed by %s "
+					"while '%s' sets config #%d\n",
+					actconfig->interface[i]
+						->cur_altsetting
+						->desc.bInterfaceNumber,
+					actconfig->interface[i]
+						->dev.driver->name,
+					current->comm, u);
+				status = -EBUSY;
+				break;
+			}
+		}
+	}
+
+	/* SET_CONFIGURATION is often abused as a "cheap" driver reset,
+	 * so avoid usb_set_configuration()'s kick to sysfs
+	 */
+	if (status == 0) {
+		if (actconfig && actconfig->desc.bConfigurationValue == u)
+			status = usb_reset_configuration(ps->dev);
+		else
+			status = usb_set_configuration(ps->dev, u);
+	}
+
+	return status;
+}
+
+static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb,
+			struct usbdevfs_iso_packet_desc __user *iso_frame_desc,
+			void __user *arg)
+{
+	struct usbdevfs_iso_packet_desc *isopkt = NULL;
+	struct usb_host_endpoint *ep;
+	struct async *as = NULL;
+	struct usb_ctrlrequest *dr = NULL;
+	unsigned int u, totlen, isofrmlen;
+	int i, ret, is_in, num_sgs = 0, ifnum = -1;
+	int number_of_packets = 0;
+	unsigned int stream_id = 0;
+	void *buf;
+
+	if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP |
+				USBDEVFS_URB_SHORT_NOT_OK |
+				USBDEVFS_URB_BULK_CONTINUATION |
+				USBDEVFS_URB_NO_FSBR |
+				USBDEVFS_URB_ZERO_PACKET |
+				USBDEVFS_URB_NO_INTERRUPT))
+		return -EINVAL;
+	if (uurb->buffer_length > 0 && !uurb->buffer)
+		return -EINVAL;
+	if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
+	    (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
+		ifnum = findintfep(ps->dev, uurb->endpoint);
+		if (ifnum < 0)
+			return ifnum;
+		ret = checkintf(ps, ifnum);
+		if (ret)
+			return ret;
+	}
+	ep = ep_to_host_endpoint(ps->dev, uurb->endpoint);
+	if (!ep)
+		return -ENOENT;
+	is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0;
+
+	u = 0;
+	switch(uurb->type) {
+	case USBDEVFS_URB_TYPE_CONTROL:
+		if (!usb_endpoint_xfer_control(&ep->desc))
+			return -EINVAL;
+		/* min 8 byte setup packet */
+		if (uurb->buffer_length < 8)
+			return -EINVAL;
+		dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+		if (!dr)
+			return -ENOMEM;
+		if (copy_from_user(dr, uurb->buffer, 8)) {
+			ret = -EFAULT;
+			goto error;
+		}
+		if (uurb->buffer_length < (le16_to_cpup(&dr->wLength) + 8)) {
+			ret = -EINVAL;
+			goto error;
+		}
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
+				      le16_to_cpup(&dr->wIndex));
+		if (ret)
+			goto error;
+		uurb->buffer_length = le16_to_cpup(&dr->wLength);
+		uurb->buffer += 8;
+		if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) {
+			is_in = 1;
+			uurb->endpoint |= USB_DIR_IN;
+		} else {
+			is_in = 0;
+			uurb->endpoint &= ~USB_DIR_IN;
+		}
+		snoop(&ps->dev->dev, "control urb: bRequestType=%02x "
+			"bRequest=%02x wValue=%04x "
+			"wIndex=%04x wLength=%04x\n",
+			dr->bRequestType, dr->bRequest,
+			__le16_to_cpup(&dr->wValue),
+			__le16_to_cpup(&dr->wIndex),
+			__le16_to_cpup(&dr->wLength));
+		u = sizeof(struct usb_ctrlrequest);
+		break;
+
+	case USBDEVFS_URB_TYPE_BULK:
+		switch (usb_endpoint_type(&ep->desc)) {
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_ISOC:
+			return -EINVAL;
+		case USB_ENDPOINT_XFER_INT:
+			/* allow single-shot interrupt transfers */
+			uurb->type = USBDEVFS_URB_TYPE_INTERRUPT;
+			goto interrupt_urb;
+		}
+		num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);
+		if (num_sgs == 1 || num_sgs > ps->dev->bus->sg_tablesize)
+			num_sgs = 0;
+		if (ep->streams)
+			stream_id = uurb->stream_id;
+		break;
+
+	case USBDEVFS_URB_TYPE_INTERRUPT:
+		if (!usb_endpoint_xfer_int(&ep->desc))
+			return -EINVAL;
+ interrupt_urb:
+		break;
+
+	case USBDEVFS_URB_TYPE_ISO:
+		/* arbitrary limit */
+		if (uurb->number_of_packets < 1 ||
+		    uurb->number_of_packets > 128)
+			return -EINVAL;
+		if (!usb_endpoint_xfer_isoc(&ep->desc))
+			return -EINVAL;
+		number_of_packets = uurb->number_of_packets;
+		isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) *
+				   number_of_packets;
+		if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
+			return -ENOMEM;
+		if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) {
+			ret = -EFAULT;
+			goto error;
+		}
+		for (totlen = u = 0; u < number_of_packets; u++) {
+			/*
+			 * arbitrary limit need for USB 3.0
+			 * bMaxBurst (0~15 allowed, 1~16 packets)
+			 * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
+			 * sizemax: 1024 * 16 * 3 = 49152
+			 */
+			if (isopkt[u].length > 49152) {
+				ret = -EINVAL;
+				goto error;
+			}
+			totlen += isopkt[u].length;
+		}
+		u *= sizeof(struct usb_iso_packet_descriptor);
+		uurb->buffer_length = totlen;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (uurb->buffer_length >= USBFS_XFER_MAX) {
+		ret = -EINVAL;
+		goto error;
+	}
+	if (uurb->buffer_length > 0 &&
+			!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+				uurb->buffer, uurb->buffer_length)) {
+		ret = -EFAULT;
+		goto error;
+	}
+	as = alloc_async(number_of_packets);
+	if (!as) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	u += sizeof(struct async) + sizeof(struct urb) + uurb->buffer_length +
+	     num_sgs * sizeof(struct scatterlist);
+	ret = usbfs_increase_memory_usage(u);
+	if (ret)
+		goto error;
+	as->mem_usage = u;
+
+	if (num_sgs) {
+		as->urb->sg = kmalloc(num_sgs * sizeof(struct scatterlist),
+				      GFP_KERNEL);
+		if (!as->urb->sg) {
+			ret = -ENOMEM;
+			goto error;
+		}
+		as->urb->num_sgs = num_sgs;
+		sg_init_table(as->urb->sg, as->urb->num_sgs);
+
+		totlen = uurb->buffer_length;
+		for (i = 0; i < as->urb->num_sgs; i++) {
+			u = (totlen > USB_SG_SIZE) ? USB_SG_SIZE : totlen;
+			buf = kmalloc(u, GFP_KERNEL);
+			if (!buf) {
+				ret = -ENOMEM;
+				goto error;
+			}
+			sg_set_buf(&as->urb->sg[i], buf, u);
+
+			if (!is_in) {
+				if (copy_from_user(buf, uurb->buffer, u)) {
+					ret = -EFAULT;
+					goto error;
+				}
+				uurb->buffer += u;
+			}
+			totlen -= u;
+		}
+	} else if (uurb->buffer_length > 0) {
+		as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+				GFP_KERNEL);
+		if (!as->urb->transfer_buffer) {
+			ret = -ENOMEM;
+			goto error;
+		}
+
+		if (!is_in) {
+			if (copy_from_user(as->urb->transfer_buffer,
+					   uurb->buffer,
+					   uurb->buffer_length)) {
+				ret = -EFAULT;
+				goto error;
+			}
+		} else if (uurb->type == USBDEVFS_URB_TYPE_ISO) {
+			/*
+			 * Isochronous input data may end up being
+			 * discontiguous if some of the packets are short.
+			 * Clear the buffer so that the gaps don't leak
+			 * kernel data to userspace.
+			 */
+			memset(as->urb->transfer_buffer, 0,
+					uurb->buffer_length);
+		}
+	}
+	as->urb->dev = ps->dev;
+	as->urb->pipe = (uurb->type << 30) |
+			__create_pipe(ps->dev, uurb->endpoint & 0xf) |
+			(uurb->endpoint & USB_DIR_IN);
+
+	/* This tedious sequence is necessary because the URB_* flags
+	 * are internal to the kernel and subject to change, whereas
+	 * the USBDEVFS_URB_* flags are a user API and must not be changed.
+	 */
+	u = (is_in ? URB_DIR_IN : URB_DIR_OUT);
+	if (uurb->flags & USBDEVFS_URB_ISO_ASAP)
+		u |= URB_ISO_ASAP;
+	if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK && is_in)
+		u |= URB_SHORT_NOT_OK;
+	if (uurb->flags & USBDEVFS_URB_NO_FSBR)
+		u |= URB_NO_FSBR;
+	if (uurb->flags & USBDEVFS_URB_ZERO_PACKET)
+		u |= URB_ZERO_PACKET;
+	if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT)
+		u |= URB_NO_INTERRUPT;
+	as->urb->transfer_flags = u;
+
+	as->urb->transfer_buffer_length = uurb->buffer_length;
+	as->urb->setup_packet = (unsigned char *)dr;
+	dr = NULL;
+	as->urb->start_frame = uurb->start_frame;
+	as->urb->number_of_packets = number_of_packets;
+	as->urb->stream_id = stream_id;
+	if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+			ps->dev->speed == USB_SPEED_HIGH)
+		as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
+	else
+		as->urb->interval = ep->desc.bInterval;
+	as->urb->context = as;
+	as->urb->complete = async_completed;
+	for (totlen = u = 0; u < number_of_packets; u++) {
+		as->urb->iso_frame_desc[u].offset = totlen;
+		as->urb->iso_frame_desc[u].length = isopkt[u].length;
+		totlen += isopkt[u].length;
+	}
+	kfree(isopkt);
+	isopkt = NULL;
+	as->ps = ps;
+	as->userurb = arg;
+	if (is_in && uurb->buffer_length > 0)
+		as->userbuffer = uurb->buffer;
+	else
+		as->userbuffer = NULL;
+	as->signr = uurb->signr;
+	as->ifnum = ifnum;
+	as->pid = get_pid(task_pid(current));
+	as->cred = get_current_cred();
+	security_task_getsecid(current, &as->secid);
+	snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+			as->urb->transfer_buffer_length, 0, SUBMIT,
+			NULL, 0);
+	if (!is_in)
+		snoop_urb_data(as->urb, as->urb->transfer_buffer_length);
+
+	async_newpending(as);
+
+	if (usb_endpoint_xfer_bulk(&ep->desc)) {
+		spin_lock_irq(&ps->lock);
+
+		/* Not exactly the endpoint address; the direction bit is
+		 * shifted to the 0x10 position so that the value will be
+		 * between 0 and 31.
+		 */
+		as->bulk_addr = usb_endpoint_num(&ep->desc) |
+			((ep->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+				>> 3);
+
+		/* If this bulk URB is the start of a new transfer, re-enable
+		 * the endpoint.  Otherwise mark it as a continuation URB.
+		 */
+		if (uurb->flags & USBDEVFS_URB_BULK_CONTINUATION)
+			as->bulk_status = AS_CONTINUATION;
+		else
+			ps->disabled_bulk_eps &= ~(1 << as->bulk_addr);
+
+		/* Don't accept continuation URBs if the endpoint is
+		 * disabled because of an earlier error.
+		 */
+		if (ps->disabled_bulk_eps & (1 << as->bulk_addr))
+			ret = -EREMOTEIO;
+		else
+			ret = usb_submit_urb(as->urb, GFP_ATOMIC);
+		spin_unlock_irq(&ps->lock);
+	} else {
+		ret = usb_submit_urb(as->urb, GFP_KERNEL);
+	}
+
+	if (ret) {
+		dev_printk(KERN_DEBUG, &ps->dev->dev,
+			   "usbfs: usb_submit_urb returned %d\n", ret);
+		snoop_urb(ps->dev, as->userurb, as->urb->pipe,
+				0, ret, COMPLETE, NULL, 0);
+		async_removepending(as);
+		goto error;
+	}
+	return 0;
+
+ error:
+	kfree(isopkt);
+	kfree(dr);
+	if (as)
+		free_async(as);
+	return ret;
+}
+
+static int proc_submiturb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_urb uurb;
+
+	if (copy_from_user(&uurb, arg, sizeof(uurb)))
+		return -EFAULT;
+
+	return proc_do_submiturb(ps, &uurb,
+			(((struct usbdevfs_urb __user *)arg)->iso_frame_desc),
+			arg);
+}
+
+static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct urb *urb;
+	struct async *as;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ps->lock, flags);
+	as = async_getpending(ps, arg);
+	if (!as) {
+		spin_unlock_irqrestore(&ps->lock, flags);
+		return -EINVAL;
+	}
+
+	urb = as->urb;
+	usb_get_urb(urb);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	usb_kill_urb(urb);
+	usb_put_urb(urb);
+
+	return 0;
+}
+
+static int processcompl(struct async *as, void __user * __user *arg)
+{
+	struct urb *urb = as->urb;
+	struct usbdevfs_urb __user *userurb = as->userurb;
+	void __user *addr = as->userurb;
+	unsigned int i;
+
+	if (as->userbuffer && urb->actual_length) {
+		if (copy_urb_data_to_user(as->userbuffer, urb))
+			goto err_out;
+	}
+	if (put_user(as->status, &userurb->status))
+		goto err_out;
+	if (put_user(urb->actual_length, &userurb->actual_length))
+		goto err_out;
+	if (put_user(urb->error_count, &userurb->error_count))
+		goto err_out;
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			if (put_user(urb->iso_frame_desc[i].actual_length,
+				     &userurb->iso_frame_desc[i].actual_length))
+				goto err_out;
+			if (put_user(urb->iso_frame_desc[i].status,
+				     &userurb->iso_frame_desc[i].status))
+				goto err_out;
+		}
+	}
+
+	if (put_user(addr, (void __user * __user *)arg))
+		return -EFAULT;
+	return 0;
+
+err_out:
+	return -EFAULT;
+}
+
+static struct async *reap_as(struct usb_dev_state *ps)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct async *as = NULL;
+	struct usb_device *dev = ps->dev;
+
+	add_wait_queue(&ps->wait, &wait);
+	for (;;) {
+		__set_current_state(TASK_INTERRUPTIBLE);
+		as = async_getcompleted(ps);
+		if (as || !connected(ps))
+			break;
+		if (signal_pending(current))
+			break;
+		usb_unlock_device(dev);
+		schedule();
+		usb_lock_device(dev);
+	}
+	remove_wait_queue(&ps->wait, &wait);
+	set_current_state(TASK_RUNNING);
+	return as;
+}
+
+static int proc_reapurb(struct usb_dev_state *ps, void __user *arg)
+{
+	struct async *as = reap_as(ps);
+	if (as) {
+		int retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
+	if (signal_pending(current))
+		return -EINTR;
+	return -ENODEV;
+}
+
+static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg)
+{
+	int retval;
+	struct async *as;
+
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	} else {
+		retval = (connected(ps) ? -EAGAIN : -ENODEV);
+	}
+	return retval;
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_control_compat(struct usb_dev_state *ps,
+				struct usbdevfs_ctrltransfer32 __user *p32)
+{
+	struct usbdevfs_ctrltransfer __user *p;
+	__u32 udata;
+	p = compat_alloc_user_space(sizeof(*p));
+	if (copy_in_user(p, p32, (sizeof(*p32) - sizeof(compat_caddr_t))) ||
+	    get_user(udata, &p32->data) ||
+	    put_user(compat_ptr(udata), &p->data))
+		return -EFAULT;
+	return proc_control(ps, p);
+}
+
+static int proc_bulk_compat(struct usb_dev_state *ps,
+			struct usbdevfs_bulktransfer32 __user *p32)
+{
+	struct usbdevfs_bulktransfer __user *p;
+	compat_uint_t n;
+	compat_caddr_t addr;
+
+	p = compat_alloc_user_space(sizeof(*p));
+
+	if (get_user(n, &p32->ep) || put_user(n, &p->ep) ||
+	    get_user(n, &p32->len) || put_user(n, &p->len) ||
+	    get_user(n, &p32->timeout) || put_user(n, &p->timeout) ||
+	    get_user(addr, &p32->data) || put_user(compat_ptr(addr), &p->data))
+		return -EFAULT;
+
+	return proc_bulk(ps, p);
+}
+static int proc_disconnectsignal_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnectsignal32 ds;
+
+	if (copy_from_user(&ds, arg, sizeof(ds)))
+		return -EFAULT;
+	ps->discsignr = ds.signr;
+	ps->disccontext = compat_ptr(ds.context);
+	return 0;
+}
+
+static int get_urb32(struct usbdevfs_urb *kurb,
+		     struct usbdevfs_urb32 __user *uurb)
+{
+	__u32  uptr;
+	if (!access_ok(VERIFY_READ, uurb, sizeof(*uurb)) ||
+	    __get_user(kurb->type, &uurb->type) ||
+	    __get_user(kurb->endpoint, &uurb->endpoint) ||
+	    __get_user(kurb->status, &uurb->status) ||
+	    __get_user(kurb->flags, &uurb->flags) ||
+	    __get_user(kurb->buffer_length, &uurb->buffer_length) ||
+	    __get_user(kurb->actual_length, &uurb->actual_length) ||
+	    __get_user(kurb->start_frame, &uurb->start_frame) ||
+	    __get_user(kurb->number_of_packets, &uurb->number_of_packets) ||
+	    __get_user(kurb->error_count, &uurb->error_count) ||
+	    __get_user(kurb->signr, &uurb->signr))
+		return -EFAULT;
+
+	if (__get_user(uptr, &uurb->buffer))
+		return -EFAULT;
+	kurb->buffer = compat_ptr(uptr);
+	if (__get_user(uptr, &uurb->usercontext))
+		return -EFAULT;
+	kurb->usercontext = compat_ptr(uptr);
+
+	return 0;
+}
+
+static int proc_submiturb_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_urb uurb;
+
+	if (get_urb32(&uurb, (struct usbdevfs_urb32 __user *)arg))
+		return -EFAULT;
+
+	return proc_do_submiturb(ps, &uurb,
+			((struct usbdevfs_urb32 __user *)arg)->iso_frame_desc,
+			arg);
+}
+
+static int processcompl_compat(struct async *as, void __user * __user *arg)
+{
+	struct urb *urb = as->urb;
+	struct usbdevfs_urb32 __user *userurb = as->userurb;
+	void __user *addr = as->userurb;
+	unsigned int i;
+
+	if (as->userbuffer && urb->actual_length) {
+		if (copy_urb_data_to_user(as->userbuffer, urb))
+			return -EFAULT;
+	}
+	if (put_user(as->status, &userurb->status))
+		return -EFAULT;
+	if (put_user(urb->actual_length, &userurb->actual_length))
+		return -EFAULT;
+	if (put_user(urb->error_count, &userurb->error_count))
+		return -EFAULT;
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			if (put_user(urb->iso_frame_desc[i].actual_length,
+				     &userurb->iso_frame_desc[i].actual_length))
+				return -EFAULT;
+			if (put_user(urb->iso_frame_desc[i].status,
+				     &userurb->iso_frame_desc[i].status))
+				return -EFAULT;
+		}
+	}
+
+	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
+		return -EFAULT;
+	return 0;
+}
+
+static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	struct async *as = reap_as(ps);
+	if (as) {
+		int retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
+	if (signal_pending(current))
+		return -EINTR;
+	return -ENODEV;
+}
+
+static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *arg)
+{
+	int retval;
+	struct async *as;
+
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	} else {
+		retval = (connected(ps) ? -EAGAIN : -ENODEV);
+	}
+	return retval;
+}
+
+
+#endif
+
+static int proc_disconnectsignal(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnectsignal ds;
+
+	if (copy_from_user(&ds, arg, sizeof(ds)))
+		return -EFAULT;
+	ps->discsignr = ds.signr;
+	ps->disccontext = ds.context;
+	return 0;
+}
+
+static int proc_claiminterface(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ifnum;
+
+	if (get_user(ifnum, (unsigned int __user *)arg))
+		return -EFAULT;
+	return claimintf(ps, ifnum);
+}
+
+static int proc_releaseinterface(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned int ifnum;
+	int ret;
+
+	if (get_user(ifnum, (unsigned int __user *)arg))
+		return -EFAULT;
+	if ((ret = releaseintf(ps, ifnum)) < 0)
+		return ret;
+	destroy_async_on_interface (ps, ifnum);
+	return 0;
+}
+
+static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl)
+{
+	int			size;
+	void			*buf = NULL;
+	int			retval = 0;
+	struct usb_interface    *intf = NULL;
+	struct usb_driver       *driver = NULL;
+
+	/* alloc buffer */
+	if ((size = _IOC_SIZE(ctl->ioctl_code)) > 0) {
+		buf = kmalloc(size, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+		if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
+			if (copy_from_user(buf, ctl->data, size)) {
+				kfree(buf);
+				return -EFAULT;
+			}
+		} else {
+			memset(buf, 0, size);
+		}
+	}
+
+	if (!connected(ps)) {
+		kfree(buf);
+		return -ENODEV;
+	}
+
+	if (ps->dev->state != USB_STATE_CONFIGURED)
+		retval = -EHOSTUNREACH;
+	else if (!(intf = usb_ifnum_to_if(ps->dev, ctl->ifno)))
+		retval = -EINVAL;
+	else switch (ctl->ioctl_code) {
+
+	/* disconnect kernel driver from interface */
+	case USBDEVFS_DISCONNECT:
+		if (intf->dev.driver) {
+			driver = to_usb_driver(intf->dev.driver);
+			dev_dbg(&intf->dev, "disconnect by usbfs\n");
+			usb_driver_release_interface(driver, intf);
+		} else
+			retval = -ENODATA;
+		break;
+
+	/* let kernel drivers try to (re)bind to the interface */
+	case USBDEVFS_CONNECT:
+		if (!intf->dev.driver)
+			retval = device_attach(&intf->dev);
+		else
+			retval = -EBUSY;
+		break;
+
+	/* talk directly to the interface's driver */
+	default:
+		if (intf->dev.driver)
+			driver = to_usb_driver(intf->dev.driver);
+		if (driver == NULL || driver->unlocked_ioctl == NULL) {
+			retval = -ENOTTY;
+		} else {
+			retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf);
+			if (retval == -ENOIOCTLCMD)
+				retval = -ENOTTY;
+		}
+	}
+
+	/* cleanup and return */
+	if (retval >= 0
+			&& (_IOC_DIR(ctl->ioctl_code) & _IOC_READ) != 0
+			&& size > 0
+			&& copy_to_user(ctl->data, buf, size) != 0)
+		retval = -EFAULT;
+
+	kfree(buf);
+	return retval;
+}
+
+static int proc_ioctl_default(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_ioctl	ctrl;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+	return proc_ioctl(ps, &ctrl);
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_ioctl_compat(struct usb_dev_state *ps, compat_uptr_t arg)
+{
+	struct usbdevfs_ioctl32 __user *uioc;
+	struct usbdevfs_ioctl ctrl;
+	u32 udata;
+
+	uioc = compat_ptr((long)arg);
+	if (!access_ok(VERIFY_READ, uioc, sizeof(*uioc)) ||
+	    __get_user(ctrl.ifno, &uioc->ifno) ||
+	    __get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+	    __get_user(udata, &uioc->data))
+		return -EFAULT;
+	ctrl.data = compat_ptr(udata);
+
+	return proc_ioctl(ps, &ctrl);
+}
+#endif
+
+static int proc_claim_port(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+	int rc;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	rc = usb_hub_claim_port(ps->dev, portnum, ps);
+	if (rc == 0)
+		snoop(&ps->dev->dev, "port %d claimed by process %d: %s\n",
+			portnum, task_pid_nr(current), current->comm);
+	return rc;
+}
+
+static int proc_release_port(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned portnum;
+
+	if (get_user(portnum, (unsigned __user *) arg))
+		return -EFAULT;
+	return usb_hub_release_port(ps->dev, portnum, ps);
+}
+
+static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg)
+{
+	__u32 caps;
+
+	caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM |
+			USBDEVFS_CAP_REAP_AFTER_DISCONNECT;
+	if (!ps->dev->bus->no_stop_on_short)
+		caps |= USBDEVFS_CAP_BULK_CONTINUATION;
+	if (ps->dev->bus->sg_tablesize)
+		caps |= USBDEVFS_CAP_BULK_SCATTER_GATHER;
+
+	if (put_user(caps, (__u32 __user *)arg))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int proc_disconnect_claim(struct usb_dev_state *ps, void __user *arg)
+{
+	struct usbdevfs_disconnect_claim dc;
+	struct usb_interface *intf;
+
+	if (copy_from_user(&dc, arg, sizeof(dc)))
+		return -EFAULT;
+
+	intf = usb_ifnum_to_if(ps->dev, dc.interface);
+	if (!intf)
+		return -EINVAL;
+
+	if (intf->dev.driver) {
+		struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+
+		if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER) &&
+				strncmp(dc.driver, intf->dev.driver->name,
+					sizeof(dc.driver)) != 0)
+			return -EBUSY;
+
+		if ((dc.flags & USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER) &&
+				strncmp(dc.driver, intf->dev.driver->name,
+					sizeof(dc.driver)) == 0)
+			return -EBUSY;
+
+		dev_dbg(&intf->dev, "disconnect by usbfs\n");
+		usb_driver_release_interface(driver, intf);
+	}
+
+	return claimintf(ps, dc.interface);
+}
+
+static int proc_alloc_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_streams, num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, &num_streams, &num_eps,
+				   &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_alloc_streams(intf, eps, num_eps, num_streams, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
+static int proc_free_streams(struct usb_dev_state *ps, void __user *arg)
+{
+	unsigned num_eps;
+	struct usb_host_endpoint **eps;
+	struct usb_interface *intf;
+	int r;
+
+	r = parse_usbdevfs_streams(ps, arg, NULL, &num_eps, &eps, &intf);
+	if (r)
+		return r;
+
+	destroy_async_on_interface(ps,
+				   intf->altsetting[0].desc.bInterfaceNumber);
+
+	r = usb_free_streams(intf, eps, num_eps, GFP_KERNEL);
+	kfree(eps);
+	return r;
+}
+
+/*
+ * NOTE:  All requests here that have interface numbers as parameters
+ * are assuming that somehow the configuration has been prevented from
+ * changing.  But there's no mechanism to ensure that...
+ */
+static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
+				void __user *p)
+{
+	struct usb_dev_state *ps = file->private_data;
+	struct inode *inode = file_inode(file);
+	struct usb_device *dev = ps->dev;
+	int ret = -ENOTTY;
+
+	if (!(file->f_mode & FMODE_WRITE))
+		return -EPERM;
+
+	usb_lock_device(dev);
+
+	/* Reap operations are allowed even after disconnection */
+	switch (cmd) {
+	case USBDEVFS_REAPURB:
+		snoop(&dev->dev, "%s: REAPURB\n", __func__);
+		ret = proc_reapurb(ps, p);
+		goto done;
+
+	case USBDEVFS_REAPURBNDELAY:
+		snoop(&dev->dev, "%s: REAPURBNDELAY\n", __func__);
+		ret = proc_reapurbnonblock(ps, p);
+		goto done;
+
+#ifdef CONFIG_COMPAT
+	case USBDEVFS_REAPURB32:
+		snoop(&dev->dev, "%s: REAPURB32\n", __func__);
+		ret = proc_reapurb_compat(ps, p);
+		goto done;
+
+	case USBDEVFS_REAPURBNDELAY32:
+		snoop(&dev->dev, "%s: REAPURBNDELAY32\n", __func__);
+		ret = proc_reapurbnonblock_compat(ps, p);
+		goto done;
+#endif
+	}
+
+	if (!connected(ps)) {
+		usb_unlock_device(dev);
+		return -ENODEV;
+	}
+
+	switch (cmd) {
+	case USBDEVFS_CONTROL:
+		snoop(&dev->dev, "%s: CONTROL\n", __func__);
+		ret = proc_control(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_BULK:
+		snoop(&dev->dev, "%s: BULK\n", __func__);
+		ret = proc_bulk(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_RESETEP:
+		snoop(&dev->dev, "%s: RESETEP\n", __func__);
+		ret = proc_resetep(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_RESET:
+		snoop(&dev->dev, "%s: RESET\n", __func__);
+		ret = proc_resetdevice(ps);
+		break;
+
+	case USBDEVFS_CLEAR_HALT:
+		snoop(&dev->dev, "%s: CLEAR_HALT\n", __func__);
+		ret = proc_clearhalt(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_GETDRIVER:
+		snoop(&dev->dev, "%s: GETDRIVER\n", __func__);
+		ret = proc_getdriver(ps, p);
+		break;
+
+	case USBDEVFS_CONNECTINFO:
+		snoop(&dev->dev, "%s: CONNECTINFO\n", __func__);
+		ret = proc_connectinfo(ps, p);
+		break;
+
+	case USBDEVFS_SETINTERFACE:
+		snoop(&dev->dev, "%s: SETINTERFACE\n", __func__);
+		ret = proc_setintf(ps, p);
+		break;
+
+	case USBDEVFS_SETCONFIGURATION:
+		snoop(&dev->dev, "%s: SETCONFIGURATION\n", __func__);
+		ret = proc_setconfig(ps, p);
+		break;
+
+	case USBDEVFS_SUBMITURB:
+		snoop(&dev->dev, "%s: SUBMITURB\n", __func__);
+		ret = proc_submiturb(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+#ifdef CONFIG_COMPAT
+	case USBDEVFS_CONTROL32:
+		snoop(&dev->dev, "%s: CONTROL32\n", __func__);
+		ret = proc_control_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_BULK32:
+		snoop(&dev->dev, "%s: BULK32\n", __func__);
+		ret = proc_bulk_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_DISCSIGNAL32:
+		snoop(&dev->dev, "%s: DISCSIGNAL32\n", __func__);
+		ret = proc_disconnectsignal_compat(ps, p);
+		break;
+
+	case USBDEVFS_SUBMITURB32:
+		snoop(&dev->dev, "%s: SUBMITURB32\n", __func__);
+		ret = proc_submiturb_compat(ps, p);
+		if (ret >= 0)
+			inode->i_mtime = CURRENT_TIME;
+		break;
+
+	case USBDEVFS_IOCTL32:
+		snoop(&dev->dev, "%s: IOCTL32\n", __func__);
+		ret = proc_ioctl_compat(ps, ptr_to_compat(p));
+		break;
+#endif
+
+	case USBDEVFS_DISCARDURB:
+		snoop(&dev->dev, "%s: DISCARDURB\n", __func__);
+		ret = proc_unlinkurb(ps, p);
+		break;
+
+	case USBDEVFS_DISCSIGNAL:
+		snoop(&dev->dev, "%s: DISCSIGNAL\n", __func__);
+		ret = proc_disconnectsignal(ps, p);
+		break;
+
+	case USBDEVFS_CLAIMINTERFACE:
+		snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __func__);
+		ret = proc_claiminterface(ps, p);
+		break;
+
+	case USBDEVFS_RELEASEINTERFACE:
+		snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __func__);
+		ret = proc_releaseinterface(ps, p);
+		break;
+
+	case USBDEVFS_IOCTL:
+		snoop(&dev->dev, "%s: IOCTL\n", __func__);
+		ret = proc_ioctl_default(ps, p);
+		break;
+
+	case USBDEVFS_CLAIM_PORT:
+		snoop(&dev->dev, "%s: CLAIM_PORT\n", __func__);
+		ret = proc_claim_port(ps, p);
+		break;
+
+	case USBDEVFS_RELEASE_PORT:
+		snoop(&dev->dev, "%s: RELEASE_PORT\n", __func__);
+		ret = proc_release_port(ps, p);
+		break;
+	case USBDEVFS_GET_CAPABILITIES:
+		ret = proc_get_capabilities(ps, p);
+		break;
+	case USBDEVFS_DISCONNECT_CLAIM:
+		ret = proc_disconnect_claim(ps, p);
+		break;
+	case USBDEVFS_ALLOC_STREAMS:
+		ret = proc_alloc_streams(ps, p);
+		break;
+	case USBDEVFS_FREE_STREAMS:
+		ret = proc_free_streams(ps, p);
+		break;
+	}
+
+ done:
+	usb_unlock_device(dev);
+	if (ret >= 0)
+		inode->i_atime = CURRENT_TIME;
+	return ret;
+}
+
+static long usbdev_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	int ret;
+
+	ret = usbdev_do_ioctl(file, cmd, (void __user *)arg);
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static long usbdev_compat_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	int ret;
+
+	ret = usbdev_do_ioctl(file, cmd, compat_ptr(arg));
+
+	return ret;
+}
+#endif
+
+/* No kernel lock - fine */
+static unsigned int usbdev_poll(struct file *file,
+				struct poll_table_struct *wait)
+{
+	struct usb_dev_state *ps = file->private_data;
+	unsigned int mask = 0;
+
+	poll_wait(file, &ps->wait, wait);
+	if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed))
+		mask |= POLLOUT | POLLWRNORM;
+	if (!connected(ps))
+		mask |= POLLERR | POLLHUP;
+	return mask;
+}
+
+const struct file_operations usbdev_file_operations = {
+	.owner =	  THIS_MODULE,
+	.llseek =	  usbdev_lseek,
+	.read =		  usbdev_read,
+	.poll =		  usbdev_poll,
+	.unlocked_ioctl = usbdev_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =   usbdev_compat_ioctl,
+#endif
+	.open =		  usbdev_open,
+	.release =	  usbdev_release,
+};
+
+static void usbdev_remove(struct usb_device *udev)
+{
+	struct usb_dev_state *ps;
+	struct siginfo sinfo;
+
+	while (!list_empty(&udev->filelist)) {
+		ps = list_entry(udev->filelist.next, struct usb_dev_state, list);
+		destroy_all_async(ps);
+		wake_up_all(&ps->wait);
+		list_del_init(&ps->list);
+		if (ps->discsignr) {
+			memset(&sinfo, 0, sizeof(sinfo));
+			sinfo.si_signo = ps->discsignr;
+			sinfo.si_errno = EPIPE;
+			sinfo.si_code = SI_ASYNCIO;
+			sinfo.si_addr = ps->disccontext;
+			kill_pid_info_as_cred(ps->discsignr, &sinfo,
+					ps->disc_pid, ps->cred, ps->secid);
+		}
+	}
+}
+
+static int usbdev_notify(struct notifier_block *self,
+			       unsigned long action, void *dev)
+{
+	switch (action) {
+	case USB_DEVICE_ADD:
+		break;
+	case USB_DEVICE_REMOVE:
+		usbdev_remove(dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block usbdev_nb = {
+	.notifier_call =	usbdev_notify,
+};
+
+static struct cdev usb_device_cdev;
+
+int __init usb_devio_init(void)
+{
+	int retval;
+
+	retval = register_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX,
+					"usb_device");
+	if (retval) {
+		printk(KERN_ERR "Unable to register minors for usb_device\n");
+		goto out;
+	}
+	cdev_init(&usb_device_cdev, &usbdev_file_operations);
+	retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
+	if (retval) {
+		printk(KERN_ERR "Unable to get usb_device major %d\n",
+		       USB_DEVICE_MAJOR);
+		goto error_cdev;
+	}
+	usb_register_notify(&usbdev_nb);
+out:
+	return retval;
+
+error_cdev:
+	unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+	goto out;
+}
+
+void usb_devio_cleanup(void)
+{
+	usb_unregister_notify(&usbdev_nb);
+	cdev_del(&usb_device_cdev);
+	unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
new file mode 100644
index 000000000..818369aff
--- /dev/null
+++ b/drivers/usb/core/driver.c
@@ -0,0 +1,1876 @@
+/*
+ * drivers/usb/driver.c - most of the driver model stuff for usb
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * based on drivers/usb/usb.c which had the following copyrights:
+ *	(C) Copyright Linus Torvalds 1999
+ *	(C) Copyright Johannes Erdfelt 1999-2001
+ *	(C) Copyright Andreas Gal 1999
+ *	(C) Copyright Gregory P. Smith 1999
+ *	(C) Copyright Deti Fliegl 1999 (new USB architecture)
+ *	(C) Copyright Randy Dunlap 2000
+ *	(C) Copyright David Brownell 2000-2004
+ *	(C) Copyright Yggdrasil Computing, Inc. 2000
+ *		(usb_device_id matching changes by Adam J. Richter)
+ *	(C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * NOTE! This is not actually a driver at all, rather this is
+ * just a collection of helper routines that implement the
+ * matching, probing, releasing, suspending and resuming for
+ * real drivers.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
+
+#include "usb.h"
+
+
+/*
+ * Adds a new dynamic USBdevice ID to this driver,
+ * and cause the driver to probe for all devices again.
+ */
+ssize_t usb_store_new_id(struct usb_dynids *dynids,
+			 const struct usb_device_id *id_table,
+			 struct device_driver *driver,
+			 const char *buf, size_t count)
+{
+	struct usb_dynid *dynid;
+	u32 idVendor = 0;
+	u32 idProduct = 0;
+	unsigned int bInterfaceClass = 0;
+	u32 refVendor, refProduct;
+	int fields = 0;
+	int retval = 0;
+
+	fields = sscanf(buf, "%x %x %x %x %x", &idVendor, &idProduct,
+			&bInterfaceClass, &refVendor, &refProduct);
+	if (fields < 2)
+		return -EINVAL;
+
+	dynid = kzalloc(sizeof(*dynid), GFP_KERNEL);
+	if (!dynid)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&dynid->node);
+	dynid->id.idVendor = idVendor;
+	dynid->id.idProduct = idProduct;
+	dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+	if (fields > 2 && bInterfaceClass) {
+		if (bInterfaceClass > 255) {
+			retval = -EINVAL;
+			goto fail;
+		}
+
+		dynid->id.bInterfaceClass = (u8)bInterfaceClass;
+		dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
+	}
+
+	if (fields > 4) {
+		const struct usb_device_id *id = id_table;
+
+		if (!id) {
+			retval = -ENODEV;
+			goto fail;
+		}
+
+		for (; id->match_flags; id++)
+			if (id->idVendor == refVendor && id->idProduct == refProduct)
+				break;
+
+		if (id->match_flags) {
+			dynid->id.driver_info = id->driver_info;
+		} else {
+			retval = -ENODEV;
+			goto fail;
+		}
+	}
+
+	spin_lock(&dynids->lock);
+	list_add_tail(&dynid->node, &dynids->list);
+	spin_unlock(&dynids->lock);
+
+	retval = driver_attach(driver);
+
+	if (retval)
+		return retval;
+	return count;
+
+fail:
+	kfree(dynid);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_store_new_id);
+
+ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf)
+{
+	struct usb_dynid *dynid;
+	size_t count = 0;
+
+	list_for_each_entry(dynid, &dynids->list, node)
+		if (dynid->id.bInterfaceClass != 0)
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n",
+					   dynid->id.idVendor, dynid->id.idProduct,
+					   dynid->id.bInterfaceClass);
+		else
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x\n",
+					   dynid->id.idVendor, dynid->id.idProduct);
+	return count;
+}
+EXPORT_SYMBOL_GPL(usb_show_dynids);
+
+static ssize_t new_id_show(struct device_driver *driver, char *buf)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_show_dynids(&usb_drv->dynids, buf);
+}
+
+static ssize_t new_id_store(struct device_driver *driver,
+			    const char *buf, size_t count)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, driver, buf, count);
+}
+static DRIVER_ATTR_RW(new_id);
+
+/*
+ * Remove a USB device ID from this driver
+ */
+static ssize_t remove_id_store(struct device_driver *driver, const char *buf,
+			       size_t count)
+{
+	struct usb_dynid *dynid, *n;
+	struct usb_driver *usb_driver = to_usb_driver(driver);
+	u32 idVendor;
+	u32 idProduct;
+	int fields;
+
+	fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
+	if (fields < 2)
+		return -EINVAL;
+
+	spin_lock(&usb_driver->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) {
+		struct usb_device_id *id = &dynid->id;
+		if ((id->idVendor == idVendor) &&
+		    (id->idProduct == idProduct)) {
+			list_del(&dynid->node);
+			kfree(dynid);
+			break;
+		}
+	}
+	spin_unlock(&usb_driver->dynids.lock);
+	return count;
+}
+
+static ssize_t remove_id_show(struct device_driver *driver, char *buf)
+{
+	return new_id_show(driver, buf);
+}
+static DRIVER_ATTR_RW(remove_id);
+
+static int usb_create_newid_files(struct usb_driver *usb_drv)
+{
+	int error = 0;
+
+	if (usb_drv->no_dynamic_id)
+		goto exit;
+
+	if (usb_drv->probe != NULL) {
+		error = driver_create_file(&usb_drv->drvwrap.driver,
+					   &driver_attr_new_id);
+		if (error == 0) {
+			error = driver_create_file(&usb_drv->drvwrap.driver,
+					&driver_attr_remove_id);
+			if (error)
+				driver_remove_file(&usb_drv->drvwrap.driver,
+						&driver_attr_new_id);
+		}
+	}
+exit:
+	return error;
+}
+
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
+{
+	if (usb_drv->no_dynamic_id)
+		return;
+
+	if (usb_drv->probe != NULL) {
+		driver_remove_file(&usb_drv->drvwrap.driver,
+				&driver_attr_remove_id);
+		driver_remove_file(&usb_drv->drvwrap.driver,
+				   &driver_attr_new_id);
+	}
+}
+
+static void usb_free_dynids(struct usb_driver *usb_drv)
+{
+	struct usb_dynid *dynid, *n;
+
+	spin_lock(&usb_drv->dynids.lock);
+	list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) {
+		list_del(&dynid->node);
+		kfree(dynid);
+	}
+	spin_unlock(&usb_drv->dynids.lock);
+}
+
+static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
+							struct usb_driver *drv)
+{
+	struct usb_dynid *dynid;
+
+	spin_lock(&drv->dynids.lock);
+	list_for_each_entry(dynid, &drv->dynids.list, node) {
+		if (usb_match_one_id(intf, &dynid->id)) {
+			spin_unlock(&drv->dynids.lock);
+			return &dynid->id;
+		}
+	}
+	spin_unlock(&drv->dynids.lock);
+	return NULL;
+}
+
+
+/* called from driver core with dev locked */
+static int usb_probe_device(struct device *dev)
+{
+	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+	struct usb_device *udev = to_usb_device(dev);
+	int error = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/* TODO: Add real matching code */
+
+	/* The device should always appear to be in use
+	 * unless the driver supports autosuspend.
+	 */
+	if (!udriver->supports_autosuspend)
+		error = usb_autoresume_device(udev);
+
+	if (!error)
+		error = udriver->probe(udev);
+	return error;
+}
+
+/* called from driver core with dev locked */
+static int usb_unbind_device(struct device *dev)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+
+	udriver->disconnect(udev);
+	if (!udriver->supports_autosuspend)
+		usb_autosuspend_device(udev);
+	return 0;
+}
+
+/* called from driver core with dev locked */
+static int usb_probe_interface(struct device *dev)
+{
+	struct usb_driver *driver = to_usb_driver(dev->driver);
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	const struct usb_device_id *id;
+	int error = -ENODEV;
+	int lpm_disable_error;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	intf->needs_binding = 0;
+
+	if (usb_device_is_owned(udev))
+		return error;
+
+	if (udev->authorized == 0) {
+		dev_err(&intf->dev, "Device is not authorized for usage\n");
+		return error;
+	}
+
+	id = usb_match_dynamic_id(intf, driver);
+	if (!id)
+		id = usb_match_id(intf, driver->id_table);
+	if (!id)
+		return error;
+
+	dev_dbg(dev, "%s - got id\n", __func__);
+
+	error = usb_autoresume_device(udev);
+	if (error)
+		return error;
+
+	intf->condition = USB_INTERFACE_BINDING;
+
+	/* Probed interfaces are initially active.  They are
+	 * runtime-PM-enabled only if the driver has autosuspend support.
+	 * They are sensitive to their children's power states.
+	 */
+	pm_runtime_set_active(dev);
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
+
+	/* If the new driver doesn't allow hub-initiated LPM, and we can't
+	 * disable hub-initiated LPM, then fail the probe.
+	 *
+	 * Otherwise, leaving LPM enabled should be harmless, because the
+	 * endpoint intervals should remain the same, and the U1/U2 timeouts
+	 * should remain the same.
+	 *
+	 * If we need to install alt setting 0 before probe, or another alt
+	 * setting during probe, that should also be fine.  usb_set_interface()
+	 * will attempt to disable LPM, and fail if it can't disable it.
+	 */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+		dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+				__func__, driver->name);
+		error = lpm_disable_error;
+		goto err;
+	}
+
+	/* Carry out a deferred switch to altsetting 0 */
+	if (intf->needs_altsetting0) {
+		error = usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+		if (error < 0)
+			goto err;
+		intf->needs_altsetting0 = 0;
+	}
+
+	error = driver->probe(intf, id);
+	if (error)
+		goto err;
+
+	intf->condition = USB_INTERFACE_BOUND;
+
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	usb_autosuspend_device(udev);
+	return error;
+
+ err:
+	usb_set_intfdata(intf, NULL);
+	intf->needs_remote_wakeup = 0;
+	intf->condition = USB_INTERFACE_UNBOUND;
+
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	usb_autosuspend_device(udev);
+	return error;
+}
+
+/* called from driver core with dev locked */
+static int usb_unbind_interface(struct device *dev)
+{
+	struct usb_driver *driver = to_usb_driver(dev->driver);
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_host_endpoint *ep, **eps = NULL;
+	struct usb_device *udev;
+	int i, j, error, r, lpm_disable_error;
+
+	intf->condition = USB_INTERFACE_UNBINDING;
+
+	/* Autoresume for set_interface call below */
+	udev = interface_to_usbdev(intf);
+	error = usb_autoresume_device(udev);
+
+	/* Hub-initiated LPM policy may change, so attempt to disable LPM until
+	 * the driver is unbound.  If LPM isn't disabled, that's fine because it
+	 * wouldn't be enabled unless all the bound interfaces supported
+	 * hub-initiated LPM.
+	 */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+
+	/*
+	 * Terminate all URBs for this interface unless the driver
+	 * supports "soft" unbinding and the device is still present.
+	 */
+	if (!driver->soft_unbind || udev->state == USB_STATE_NOTATTACHED)
+		usb_disable_interface(udev, intf, false);
+
+	driver->disconnect(intf);
+
+	/* Free streams */
+	for (i = 0, j = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep = &intf->cur_altsetting->endpoint[i];
+		if (ep->streams == 0)
+			continue;
+		if (j == 0) {
+			eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *),
+				      GFP_KERNEL);
+			if (!eps) {
+				dev_warn(dev, "oom, leaking streams\n");
+				break;
+			}
+		}
+		eps[j++] = ep;
+	}
+	if (j) {
+		usb_free_streams(intf, eps, j, GFP_KERNEL);
+		kfree(eps);
+	}
+
+	/* Reset other interface state.
+	 * We cannot do a Set-Interface if the device is suspended or
+	 * if it is prepared for a system sleep (since installing a new
+	 * altsetting means creating new endpoint device entries).
+	 * When either of these happens, defer the Set-Interface.
+	 */
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0) {
+		/* Already in altsetting 0 so skip Set-Interface.
+		 * Just re-enable it without affecting the endpoint toggles.
+		 */
+		usb_enable_interface(udev, intf, false);
+	} else if (!error && !intf->dev.power.is_prepared) {
+		r = usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+		if (r < 0)
+			intf->needs_altsetting0 = 1;
+	} else {
+		intf->needs_altsetting0 = 1;
+	}
+	usb_set_intfdata(intf, NULL);
+
+	intf->condition = USB_INTERFACE_UNBOUND;
+	intf->needs_remote_wakeup = 0;
+
+	/* Attempt to re-enable USB3 LPM, if the disable succeeded. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	/* Undo any residual pm_autopm_get_interface_* calls */
+	for (r = atomic_read(&intf->pm_usage_cnt); r > 0; --r)
+		usb_autopm_put_interface_no_suspend(intf);
+	atomic_set(&intf->pm_usage_cnt, 0);
+
+	if (!error)
+		usb_autosuspend_device(udev);
+
+	return 0;
+}
+
+/**
+ * usb_driver_claim_interface - bind a driver to an interface
+ * @driver: the driver to be bound
+ * @iface: the interface to which it will be bound; must be in the
+ *	usb device's active configuration
+ * @priv: driver data associated with that interface
+ *
+ * This is used by usb device drivers that need to claim more than one
+ * interface on a device when probing (audio and acm are current examples).
+ * No device driver should directly modify internal usb_interface or
+ * usb_device structure members.
+ *
+ * Few drivers should need to use this routine, since the most natural
+ * way to bind to an interface is to return the private data from
+ * the driver's probe() method.
+ *
+ * Callers must own the device lock, so driver probe() entries don't need
+ * extra locking, but other call contexts may need to explicitly claim that
+ * lock.
+ *
+ * Return: 0 on success.
+ */
+int usb_driver_claim_interface(struct usb_driver *driver,
+				struct usb_interface *iface, void *priv)
+{
+	struct device *dev = &iface->dev;
+	struct usb_device *udev;
+	int retval = 0;
+	int lpm_disable_error;
+
+	if (dev->driver)
+		return -EBUSY;
+
+	udev = interface_to_usbdev(iface);
+
+	dev->driver = &driver->drvwrap.driver;
+	usb_set_intfdata(iface, priv);
+	iface->needs_binding = 0;
+
+	iface->condition = USB_INTERFACE_BOUND;
+
+	/* Disable LPM until this driver is bound. */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+		dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+				__func__, driver->name);
+		return -ENOMEM;
+	}
+
+	/* Claimed interfaces are initially inactive (suspended) and
+	 * runtime-PM-enabled, but only if the driver has autosuspend
+	 * support.  Otherwise they are marked active, to prevent the
+	 * device from being autosuspended, but left disabled.  In either
+	 * case they are sensitive to their children's power states.
+	 */
+	pm_suspend_ignore_children(dev, false);
+	if (driver->supports_autosuspend)
+		pm_runtime_enable(dev);
+	else
+		pm_runtime_set_active(dev);
+
+	/* if interface was already added, bind now; else let
+	 * the future device_add() bind it, bypassing probe()
+	 */
+	if (device_is_registered(dev))
+		retval = device_bind_driver(dev);
+
+	/* Attempt to re-enable USB3 LPM, if the disable was successful. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_driver_claim_interface);
+
+/**
+ * usb_driver_release_interface - unbind a driver from an interface
+ * @driver: the driver to be unbound
+ * @iface: the interface from which it will be unbound
+ *
+ * This can be used by drivers to release an interface without waiting
+ * for their disconnect() methods to be called.  In typical cases this
+ * also causes the driver disconnect() method to be called.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ * Callers must own the device lock, so driver disconnect() entries don't
+ * need extra locking, but other call contexts may need to explicitly claim
+ * that lock.
+ */
+void usb_driver_release_interface(struct usb_driver *driver,
+					struct usb_interface *iface)
+{
+	struct device *dev = &iface->dev;
+
+	/* this should never happen, don't release something that's not ours */
+	if (!dev->driver || dev->driver != &driver->drvwrap.driver)
+		return;
+
+	/* don't release from within disconnect() */
+	if (iface->condition != USB_INTERFACE_BOUND)
+		return;
+	iface->condition = USB_INTERFACE_UNBINDING;
+
+	/* Release via the driver core only if the interface
+	 * has already been registered
+	 */
+	if (device_is_registered(dev)) {
+		device_release_driver(dev);
+	} else {
+		device_lock(dev);
+		usb_unbind_interface(dev);
+		dev->driver = NULL;
+		device_unlock(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_driver_release_interface);
+
+/* returns 0 if no match, 1 if match */
+int usb_match_device(struct usb_device *dev, const struct usb_device_id *id)
+{
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+	    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+	    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+		return 0;
+
+	/* No need to test id->bcdDevice_lo != 0, since 0 is never
+	   greater than any unsigned number. */
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+	    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+	    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+	    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+	    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+	    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+		return 0;
+
+	return 1;
+}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id_intf(struct usb_device *dev,
+			  struct usb_host_interface *intf,
+			  const struct usb_device_id *id)
+{
+	/* The interface class, subclass, protocol and number should never be
+	 * checked for a match if the device class is Vendor Specific,
+	 * unless the match record specifies the Vendor ID. */
+	if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC &&
+			!(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+			(id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
+				USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+				USB_DEVICE_ID_MATCH_INT_PROTOCOL |
+				USB_DEVICE_ID_MATCH_INT_NUMBER)))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
+	    (id->bInterfaceClass != intf->desc.bInterfaceClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
+	    (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
+	    (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol))
+		return 0;
+
+	if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER) &&
+	    (id->bInterfaceNumber != intf->desc.bInterfaceNumber))
+		return 0;
+
+	return 1;
+}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	struct usb_host_interface *intf;
+	struct usb_device *dev;
+
+	/* proc_connectinfo in devio.c may call us with id == NULL. */
+	if (id == NULL)
+		return 0;
+
+	intf = interface->cur_altsetting;
+	dev = interface_to_usbdev(interface);
+
+	if (!usb_match_device(dev, id))
+		return 0;
+
+	return usb_match_one_id_intf(dev, intf, id);
+}
+EXPORT_SYMBOL_GPL(usb_match_one_id);
+
+/**
+ * usb_match_id - find first usb_device_id matching device or interface
+ * @interface: the interface of interest
+ * @id: array of usb_device_id structures, terminated by zero entry
+ *
+ * usb_match_id searches an array of usb_device_id's and returns
+ * the first one matching the device or interface, or null.
+ * This is used when binding (or rebinding) a driver to an interface.
+ * Most USB device drivers will use this indirectly, through the usb core,
+ * but some layered driver frameworks use it directly.
+ * These device tables are exported with MODULE_DEVICE_TABLE, through
+ * modutils, to support the driver loading functionality of USB hotplugging.
+ *
+ * Return: The first matching usb_device_id, or %NULL.
+ *
+ * What Matches:
+ *
+ * The "match_flags" element in a usb_device_id controls which
+ * members are used.  If the corresponding bit is set, the
+ * value in the device_id must match its corresponding member
+ * in the device or interface descriptor, or else the device_id
+ * does not match.
+ *
+ * "driver_info" is normally used only by device drivers,
+ * but you can create a wildcard "matches anything" usb_device_id
+ * as a driver's "modules.usbmap" entry if you provide an id with
+ * only a nonzero "driver_info" field.  If you do this, the USB device
+ * driver's probe() routine should use additional intelligence to
+ * decide whether to bind to the specified interface.
+ *
+ * What Makes Good usb_device_id Tables:
+ *
+ * The match algorithm is very simple, so that intelligence in
+ * driver selection must come from smart driver id records.
+ * Unless you have good reasons to use another selection policy,
+ * provide match elements only in related groups, and order match
+ * specifiers from specific to general.  Use the macros provided
+ * for that purpose if you can.
+ *
+ * The most specific match specifiers use device descriptor
+ * data.  These are commonly used with product-specific matches;
+ * the USB_DEVICE macro lets you provide vendor and product IDs,
+ * and you can also match against ranges of product revisions.
+ * These are widely used for devices with application or vendor
+ * specific bDeviceClass values.
+ *
+ * Matches based on device class/subclass/protocol specifications
+ * are slightly more general; use the USB_DEVICE_INFO macro, or
+ * its siblings.  These are used with single-function devices
+ * where bDeviceClass doesn't specify that each interface has
+ * its own class.
+ *
+ * Matches based on interface class/subclass/protocol are the
+ * most general; they let drivers bind to any interface on a
+ * multiple-function device.  Use the USB_INTERFACE_INFO
+ * macro, or its siblings, to match class-per-interface style
+ * devices (as recorded in bInterfaceClass).
+ *
+ * Note that an entry created by USB_INTERFACE_INFO won't match
+ * any interface if the device class is set to Vendor-Specific.
+ * This is deliberate; according to the USB spec the meanings of
+ * the interface class/subclass/protocol for these devices are also
+ * vendor-specific, and hence matching against a standard product
+ * class wouldn't work anyway.  If you really want to use an
+ * interface-based match for such a device, create a match record
+ * that also specifies the vendor ID.  (Unforunately there isn't a
+ * standard macro for creating records like this.)
+ *
+ * Within those groups, remember that not all combinations are
+ * meaningful.  For example, don't give a product version range
+ * without vendor and product IDs; or specify a protocol without
+ * its associated class and subclass.
+ */
+const struct usb_device_id *usb_match_id(struct usb_interface *interface,
+					 const struct usb_device_id *id)
+{
+	/* proc_connectinfo in devio.c may call us with id == NULL. */
+	if (id == NULL)
+		return NULL;
+
+	/* It is important to check that id->driver_info is nonzero,
+	   since an entry that is all zeroes except for a nonzero
+	   id->driver_info is the way to create an entry that
+	   indicates that the driver want to examine every
+	   device and interface. */
+	for (; id->idVendor || id->idProduct || id->bDeviceClass ||
+	       id->bInterfaceClass || id->driver_info; id++) {
+		if (usb_match_one_id(interface, id))
+			return id;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_match_id);
+
+static int usb_device_match(struct device *dev, struct device_driver *drv)
+{
+	/* devices and interfaces are handled separately */
+	if (is_usb_device(dev)) {
+
+		/* interface drivers never match devices */
+		if (!is_usb_device_driver(drv))
+			return 0;
+
+		/* TODO: Add real matching code */
+		return 1;
+
+	} else if (is_usb_interface(dev)) {
+		struct usb_interface *intf;
+		struct usb_driver *usb_drv;
+		const struct usb_device_id *id;
+
+		/* device drivers never match interfaces */
+		if (is_usb_device_driver(drv))
+			return 0;
+
+		intf = to_usb_interface(dev);
+		usb_drv = to_usb_driver(drv);
+
+		id = usb_match_id(intf, usb_drv->id_table);
+		if (id)
+			return 1;
+
+		id = usb_match_dynamic_id(intf, usb_drv);
+		if (id)
+			return 1;
+	}
+
+	return 0;
+}
+
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+
+	if (is_usb_device(dev)) {
+		usb_dev = to_usb_device(dev);
+	} else if (is_usb_interface(dev)) {
+		struct usb_interface *intf = to_usb_interface(dev);
+
+		usb_dev = interface_to_usbdev(intf);
+	} else {
+		return 0;
+	}
+
+	if (usb_dev->devnum < 0) {
+		/* driver is often null here; dev_dbg() would oops */
+		pr_debug("usb %s: already deleted?\n", dev_name(dev));
+		return -ENODEV;
+	}
+	if (!usb_dev->bus) {
+		pr_debug("usb %s: bus removed?\n", dev_name(dev));
+		return -ENODEV;
+	}
+
+	/* per-device configurations are common */
+	if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
+			   le16_to_cpu(usb_dev->descriptor.idVendor),
+			   le16_to_cpu(usb_dev->descriptor.idProduct),
+			   le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+		return -ENOMEM;
+
+	/* class-based driver binding models */
+	if (add_uevent_var(env, "TYPE=%d/%d/%d",
+			   usb_dev->descriptor.bDeviceClass,
+			   usb_dev->descriptor.bDeviceSubClass,
+			   usb_dev->descriptor.bDeviceProtocol))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * usb_register_device_driver - register a USB device (not interface) driver
+ * @new_udriver: USB operations for the device driver
+ * @owner: module owner of this driver.
+ *
+ * Registers a USB device driver with the USB core.  The list of
+ * unattached devices will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized devices.
+ *
+ * Return: A negative error code on failure and 0 on success.
+ */
+int usb_register_device_driver(struct usb_device_driver *new_udriver,
+		struct module *owner)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	new_udriver->drvwrap.for_devices = 1;
+	new_udriver->drvwrap.driver.name = new_udriver->name;
+	new_udriver->drvwrap.driver.bus = &usb_bus_type;
+	new_udriver->drvwrap.driver.probe = usb_probe_device;
+	new_udriver->drvwrap.driver.remove = usb_unbind_device;
+	new_udriver->drvwrap.driver.owner = owner;
+
+	retval = driver_register(&new_udriver->drvwrap.driver);
+
+	if (!retval)
+		pr_info("%s: registered new device driver %s\n",
+			usbcore_name, new_udriver->name);
+	else
+		printk(KERN_ERR "%s: error %d registering device "
+			"	driver %s\n",
+			usbcore_name, retval, new_udriver->name);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_register_device_driver);
+
+/**
+ * usb_deregister_device_driver - unregister a USB device (not interface) driver
+ * @udriver: USB operations of the device driver to unregister
+ * Context: must be able to sleep
+ *
+ * Unlinks the specified driver from the internal USB driver list.
+ */
+void usb_deregister_device_driver(struct usb_device_driver *udriver)
+{
+	pr_info("%s: deregistering device driver %s\n",
+			usbcore_name, udriver->name);
+
+	driver_unregister(&udriver->drvwrap.driver);
+}
+EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
+
+/**
+ * usb_register_driver - register a USB interface driver
+ * @new_driver: USB operations for the interface driver
+ * @owner: module owner of this driver.
+ * @mod_name: module name string
+ *
+ * Registers a USB interface driver with the USB core.  The list of
+ * unattached interfaces will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized interfaces.
+ *
+ * Return: A negative error code on failure and 0 on success.
+ *
+ * NOTE: if you want your driver to use the USB major number, you must call
+ * usb_register_dev() to enable that functionality.  This function no longer
+ * takes care of that.
+ */
+int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
+			const char *mod_name)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	new_driver->drvwrap.for_devices = 0;
+	new_driver->drvwrap.driver.name = new_driver->name;
+	new_driver->drvwrap.driver.bus = &usb_bus_type;
+	new_driver->drvwrap.driver.probe = usb_probe_interface;
+	new_driver->drvwrap.driver.remove = usb_unbind_interface;
+	new_driver->drvwrap.driver.owner = owner;
+	new_driver->drvwrap.driver.mod_name = mod_name;
+	spin_lock_init(&new_driver->dynids.lock);
+	INIT_LIST_HEAD(&new_driver->dynids.list);
+
+	retval = driver_register(&new_driver->drvwrap.driver);
+	if (retval)
+		goto out;
+
+	retval = usb_create_newid_files(new_driver);
+	if (retval)
+		goto out_newid;
+
+	pr_info("%s: registered new interface driver %s\n",
+			usbcore_name, new_driver->name);
+
+out:
+	return retval;
+
+out_newid:
+	driver_unregister(&new_driver->drvwrap.driver);
+
+	printk(KERN_ERR "%s: error %d registering interface "
+			"	driver %s\n",
+			usbcore_name, retval, new_driver->name);
+	goto out;
+}
+EXPORT_SYMBOL_GPL(usb_register_driver);
+
+/**
+ * usb_deregister - unregister a USB interface driver
+ * @driver: USB operations of the interface driver to unregister
+ * Context: must be able to sleep
+ *
+ * Unlinks the specified driver from the internal USB driver list.
+ *
+ * NOTE: If you called usb_register_dev(), you still need to call
+ * usb_deregister_dev() to clean up your driver's allocated minor numbers,
+ * this * call will no longer do it for you.
+ */
+void usb_deregister(struct usb_driver *driver)
+{
+	pr_info("%s: deregistering interface driver %s\n",
+			usbcore_name, driver->name);
+
+	usb_remove_newid_files(driver);
+	driver_unregister(&driver->drvwrap.driver);
+	usb_free_dynids(driver);
+}
+EXPORT_SYMBOL_GPL(usb_deregister);
+
+/* Forced unbinding of a USB interface driver, either because
+ * it doesn't support pre_reset/post_reset/reset_resume or
+ * because it doesn't support suspend/resume.
+ *
+ * The caller must hold @intf's device's lock, but not @intf's lock.
+ */
+void usb_forced_unbind_intf(struct usb_interface *intf)
+{
+	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+
+	dev_dbg(&intf->dev, "forced unbind\n");
+	usb_driver_release_interface(driver, intf);
+
+	/* Mark the interface for later rebinding */
+	intf->needs_binding = 1;
+}
+
+/*
+ * Unbind drivers for @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set, for example by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->dev.driver && intf->needs_binding)
+				usb_forced_unbind_intf(intf);
+		}
+	}
+}
+
+/* Delayed forced unbinding of a USB interface driver and scan
+ * for rebinding.
+ *
+ * The caller must hold @intf's device's lock, but not @intf's lock.
+ *
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
+ */
+static void usb_rebind_intf(struct usb_interface *intf)
+{
+	int rc;
+
+	/* Delayed unbind of an existing driver */
+	if (intf->dev.driver)
+		usb_forced_unbind_intf(intf);
+
+	/* Try to rebind the interface */
+	if (!intf->dev.power.is_prepared) {
+		intf->needs_binding = 0;
+		rc = device_attach(&intf->dev);
+		if (rc < 0)
+			dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	}
+}
+
+/*
+ * Rebind drivers to @udev's marked interfaces.  These interfaces have
+ * the needs_binding flag set.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void rebind_marked_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->needs_binding)
+				usb_rebind_intf(intf);
+		}
+	}
+}
+
+/*
+ * Unbind all of @udev's marked interfaces and then rebind all of them.
+ * This ordering is necessary because some drivers claim several interfaces
+ * when they are first probed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev)
+{
+	unbind_marked_interfaces(udev);
+	rebind_marked_interfaces(udev);
+}
+
+#ifdef CONFIG_PM
+
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+	struct usb_driver	*drv;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+
+			if (intf->dev.driver) {
+				drv = to_usb_driver(intf->dev.driver);
+				if (!drv->suspend || !drv->resume)
+					usb_forced_unbind_intf(intf);
+			}
+		}
+	}
+}
+
+static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_device_driver	*udriver;
+	int				status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED)
+		goto done;
+
+	/* For devices that don't have a driver, we do a generic suspend. */
+	if (udev->dev.driver)
+		udriver = to_usb_device_driver(udev->dev.driver);
+	else {
+		udev->do_remote_wakeup = 0;
+		udriver = &usb_generic_driver;
+	}
+	status = udriver->suspend(udev, msg);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_resume_device(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_device_driver	*udriver;
+	int				status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		goto done;
+
+	/* Can't resume it if it doesn't have a driver. */
+	if (udev->dev.driver == NULL) {
+		status = -ENOTCONN;
+		goto done;
+	}
+
+	/* Non-root devices on a full/low-speed bus must wait for their
+	 * companion high-speed root hub, in case a handoff is needed.
+	 */
+	if (!PMSG_IS_AUTO(msg) && udev->parent && udev->bus->hs_companion)
+		device_pm_wait_for_dev(&udev->dev,
+				&udev->bus->hs_companion->root_hub->dev);
+
+	if (udev->quirks & USB_QUIRK_RESET_RESUME)
+		udev->reset_resume = 1;
+
+	udriver = to_usb_device_driver(udev->dev.driver);
+	status = udriver->resume(udev, msg);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_suspend_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg)
+{
+	struct usb_driver	*driver;
+	int			status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			intf->condition == USB_INTERFACE_UNBOUND)
+		goto done;
+	driver = to_usb_driver(intf->dev.driver);
+
+	/* at this time we know the driver supports suspend */
+	status = driver->suspend(intf, msg);
+	if (status && !PMSG_IS_AUTO(msg))
+		dev_err(&intf->dev, "suspend error %d\n", status);
+
+ done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+static int usb_resume_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg, int reset_resume)
+{
+	struct usb_driver	*driver;
+	int			status = 0;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		goto done;
+
+	/* Don't let autoresume interfere with unbinding */
+	if (intf->condition == USB_INTERFACE_UNBINDING)
+		goto done;
+
+	/* Can't resume it if it doesn't have a driver. */
+	if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
+		goto done;
+	}
+
+	/* Don't resume if the interface is marked for rebinding */
+	if (intf->needs_binding)
+		goto done;
+	driver = to_usb_driver(intf->dev.driver);
+
+	if (reset_resume) {
+		if (driver->reset_resume) {
+			status = driver->reset_resume(intf);
+			if (status)
+				dev_err(&intf->dev, "%s error %d\n",
+						"reset_resume", status);
+		} else {
+			intf->needs_binding = 1;
+			dev_dbg(&intf->dev, "no reset_resume for driver %s?\n",
+					driver->name);
+		}
+	} else {
+		status = driver->resume(intf);
+		if (status)
+			dev_err(&intf->dev, "resume error %d\n", status);
+	}
+
+done:
+	dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
+
+	/* Later we will unbind the driver and/or reprobe, if necessary */
+	return status;
+}
+
+/**
+ * usb_suspend_both - suspend a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for suspending USB devices.  It calls the
+ * suspend methods for all the interface drivers in @udev and then calls
+ * the suspend method for @udev itself.  When the routine is called in
+ * autosuspend, if an error occurs at any stage, all the interfaces
+ * which were suspended are resumed so that they remain in the same
+ * state as the device, but when called from system sleep, all error
+ * from suspend methods of interfaces and the non-root-hub device itself
+ * are simply ignored, so all suspended interfaces are only resumed
+ * to the device's state when @udev is root-hub and its suspend method
+ * returns failure.
+ *
+ * Autosuspend requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other suspend calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle suspend calls arriving at
+ * unpredictable times.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 if the suspend succeeded.
+ */
+static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+{
+	int			status = 0;
+	int			i = 0, n = 0;
+	struct usb_interface	*intf;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED)
+		goto done;
+
+	/* Suspend all the interfaces and then udev itself */
+	if (udev->actconfig) {
+		n = udev->actconfig->desc.bNumInterfaces;
+		for (i = n - 1; i >= 0; --i) {
+			intf = udev->actconfig->interface[i];
+			status = usb_suspend_interface(udev, intf, msg);
+
+			/* Ignore errors during system sleep transitions */
+			if (!PMSG_IS_AUTO(msg))
+				status = 0;
+			if (status != 0)
+				break;
+		}
+	}
+	if (status == 0) {
+		status = usb_suspend_device(udev, msg);
+
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
+			status = 0;
+	}
+
+	/* If the suspend failed, resume interfaces that did get suspended */
+	if (status != 0) {
+		if (udev->actconfig) {
+			msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
+			while (++i < n) {
+				intf = udev->actconfig->interface[i];
+				usb_resume_interface(udev, intf, msg, 0);
+			}
+		}
+
+	/* If the suspend succeeded then prevent any more URB submissions
+	 * and flush any outstanding URBs.
+	 */
+	} else {
+		udev->can_submit = 0;
+		for (i = 0; i < 16; ++i) {
+			usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+			usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
+		}
+	}
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	return status;
+}
+
+/**
+ * usb_resume_both - resume a USB device and its interfaces
+ * @udev: the usb_device to resume
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for resuming USB devices.  It calls the
+ * the resume method for @udev and then calls the resume methods for all
+ * the interface drivers in @udev.
+ *
+ * Autoresume requests originating from a child device or an interface
+ * driver may be made without the protection of @udev's device lock, but
+ * all other resume calls will hold the lock.  Usbcore will insure that
+ * method calls do not arrive during bind, unbind, or reset operations.
+ * However drivers must be prepared to handle resume calls arriving at
+ * unpredictable times.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success.
+ */
+static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
+{
+	int			status = 0;
+	int			i;
+	struct usb_interface	*intf;
+
+	if (udev->state == USB_STATE_NOTATTACHED) {
+		status = -ENODEV;
+		goto done;
+	}
+	udev->can_submit = 1;
+
+	/* Resume the device */
+	if (udev->state == USB_STATE_SUSPENDED || udev->reset_resume)
+		status = usb_resume_device(udev, msg);
+
+	/* Resume the interfaces */
+	if (status == 0 && udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
+			usb_resume_interface(udev, intf, msg,
+					udev->reset_resume);
+		}
+	}
+	usb_mark_last_busy(udev);
+
+ done:
+	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
+	if (!status)
+		udev->reset_resume = 0;
+	return status;
+}
+
+static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
+{
+	int	w;
+
+	/* Remote wakeup is needed only when we actually go to sleep.
+	 * For things like FREEZE and QUIESCE, if the device is already
+	 * autosuspended then its current wakeup setting is okay.
+	 */
+	if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) {
+		if (udev->state != USB_STATE_SUSPENDED)
+			udev->do_remote_wakeup = 0;
+		return;
+	}
+
+	/* Enable remote wakeup if it is allowed, even if no interface drivers
+	 * actually want it.
+	 */
+	w = device_may_wakeup(&udev->dev);
+
+	/* If the device is autosuspended with the wrong wakeup setting,
+	 * autoresume now so the setting can be changed.
+	 */
+	if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
+		pm_runtime_resume(&udev->dev);
+	udev->do_remote_wakeup = w;
+}
+
+/* The device lock is held by the PM core */
+int usb_suspend(struct device *dev, pm_message_t msg)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+
+	unbind_no_pm_drivers_interfaces(udev);
+
+	/* From now on we are sure all drivers support suspend/resume
+	 * but not necessarily reset_resume()
+	 * so we may still need to unbind and rebind upon resume
+	 */
+	choose_wakeup(udev, msg);
+	return usb_suspend_both(udev, msg);
+}
+
+/* The device lock is held by the PM core */
+int usb_resume_complete(struct device *dev)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	/* For PM complete calls, all we do is rebind interfaces
+	 * whose needs_binding flag is set
+	 */
+	if (udev->state != USB_STATE_NOTATTACHED)
+		rebind_marked_interfaces(udev);
+	return 0;
+}
+
+/* The device lock is held by the PM core */
+int usb_resume(struct device *dev, pm_message_t msg)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* For all calls, take the device back to full power and
+	 * tell the PM core in case it was autosuspended previously.
+	 * Unbind the interfaces that will need rebinding later,
+	 * because they fail to support reset_resume.
+	 * (This can't be done in usb_resume_interface()
+	 * above because it doesn't own the right set of locks.)
+	 */
+	status = usb_resume_both(udev, msg);
+	if (status == 0) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+		unbind_marked_interfaces(udev);
+	}
+
+	/* Avoid PM error messages for devices disconnected while suspended
+	 * as we'll display regular disconnect messages just a bit later.
+	 */
+	if (status == -ENODEV || status == -ESHUTDOWN)
+		status = 0;
+	return status;
+}
+
+/**
+ * usb_enable_autosuspend - allow a USB device to be autosuspended
+ * @udev: the USB device which may be autosuspended
+ *
+ * This routine allows @udev to be autosuspended.  An autosuspend won't
+ * take place until the autosuspend_delay has elapsed and all the other
+ * necessary conditions are satisfied.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_enable_autosuspend(struct usb_device *udev)
+{
+	pm_runtime_allow(&udev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_enable_autosuspend);
+
+/**
+ * usb_disable_autosuspend - prevent a USB device from being autosuspended
+ * @udev: the USB device which may not be autosuspended
+ *
+ * This routine prevents @udev from being autosuspended and wakes it up
+ * if it is already autosuspended.
+ *
+ * The caller must hold @udev's device lock.
+ */
+void usb_disable_autosuspend(struct usb_device *udev)
+{
+	pm_runtime_forbid(&udev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_disable_autosuspend);
+
+/**
+ * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
+ * @udev: the usb_device to autosuspend
+ *
+ * This routine should be called when a core subsystem is finished using
+ * @udev and wants to allow it to autosuspend.  Examples would be when
+ * @udev's device file in usbfs is closed or after a configuration change.
+ *
+ * @udev's usage counter is decremented; if it drops to 0 and all the
+ * interfaces are inactive then a delayed autosuspend will be attempted.
+ * The attempt may fail (see autosuspend_check()).
+ *
+ * The caller must hold @udev's device lock.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autosuspend_device(struct usb_device *udev)
+{
+	int	status;
+
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put_sync_autosuspend(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
+}
+
+/**
+ * usb_autoresume_device - immediately autoresume a USB device and its interfaces
+ * @udev: the usb_device to autoresume
+ *
+ * This routine should be called when a core subsystem wants to use @udev
+ * and needs to guarantee that it is not suspended.  No autosuspend will
+ * occur until usb_autosuspend_device() is called.  (Note that this will
+ * not prevent suspend events originating in the PM core.)  Examples would
+ * be when @udev's device file in usbfs is opened or when a remote-wakeup
+ * request is received.
+ *
+ * @udev's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the usage counter is re-decremented.
+ *
+ * The caller must hold @udev's device lock.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success. A negative error code otherwise.
+ */
+int usb_autoresume_device(struct usb_device *udev)
+{
+	int	status;
+
+	status = pm_runtime_get_sync(&udev->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&udev->dev);
+	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&udev->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
+	return status;
+}
+
+/**
+ * usb_autopm_put_interface - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine should be called by an interface driver when it is
+ * finished using @intf and wants to allow it to autosuspend.  A typical
+ * example would be a character-device driver when its device file is
+ * closed.
+ *
+ * The routine decrements @intf's usage counter.  When the counter reaches
+ * 0, a delayed autosuspend request for @intf's device is attempted.  The
+ * attempt may fail (see autosuspend_check()).
+ *
+ * This routine can run only in process context.
+ */
+void usb_autopm_put_interface(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+	int			status;
+
+	usb_mark_last_busy(udev);
+	atomic_dec(&intf->pm_usage_cnt);
+	status = pm_runtime_put_sync(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
+
+/**
+ * usb_autopm_put_interface_async - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine does much the same thing as usb_autopm_put_interface():
+ * It decrements @intf's usage counter and schedules a delayed
+ * autosuspend request if the counter is <= 0.  The difference is that it
+ * does not perform any synchronization; callers should hold a private
+ * lock and handle all synchronization issues themselves.
+ *
+ * Typically a driver would call this routine during an URB's completion
+ * handler, if no more URBs were pending.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_async(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+	int			status;
+
+	usb_mark_last_busy(udev);
+	atomic_dec(&intf->pm_usage_cnt);
+	status = pm_runtime_put(&intf->dev);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_async);
+
+/**
+ * usb_autopm_put_interface_no_suspend - decrement a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be decremented
+ *
+ * This routine decrements @intf's usage counter but does not carry out an
+ * autosuspend.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_put_interface_no_suspend(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+
+	usb_mark_last_busy(udev);
+	atomic_dec(&intf->pm_usage_cnt);
+	pm_runtime_put_noidle(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface_no_suspend);
+
+/**
+ * usb_autopm_get_interface - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine should be called by an interface driver when it wants to
+ * use @intf and needs to guarantee that it is not suspended.  In addition,
+ * the routine prevents @intf from being autosuspended subsequently.  (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * This prevention will persist until usb_autopm_put_interface() is called
+ * or @intf is unbound.  A typical example would be a character-device
+ * driver when its device file is opened.
+ *
+ * @intf's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the counter is re-decremented.
+ *
+ * This routine can run only in process context.
+ *
+ * Return: 0 on success.
+ */
+int usb_autopm_get_interface(struct usb_interface *intf)
+{
+	int	status;
+
+	status = pm_runtime_get_sync(&intf->dev);
+	if (status < 0)
+		pm_runtime_put_sync(&intf->dev);
+	else
+		atomic_inc(&intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0)
+		status = 0;
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
+
+/**
+ * usb_autopm_get_interface_async - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine does much the same thing as
+ * usb_autopm_get_interface(): It increments @intf's usage counter and
+ * queues an autoresume request if the device is suspended.  The
+ * differences are that it does not perform any synchronization (callers
+ * should hold a private lock and handle all synchronization issues
+ * themselves), and it does not autoresume the device directly (it only
+ * queues a request).  After a successful call, the device may not yet be
+ * resumed.
+ *
+ * This routine can run in atomic context.
+ *
+ * Return: 0 on success. A negative error code otherwise.
+ */
+int usb_autopm_get_interface_async(struct usb_interface *intf)
+{
+	int	status;
+
+	status = pm_runtime_get(&intf->dev);
+	if (status < 0 && status != -EINPROGRESS)
+		pm_runtime_put_noidle(&intf->dev);
+	else
+		atomic_inc(&intf->pm_usage_cnt);
+	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
+			__func__, atomic_read(&intf->dev.power.usage_count),
+			status);
+	if (status > 0 || status == -EINPROGRESS)
+		status = 0;
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_async);
+
+/**
+ * usb_autopm_get_interface_no_resume - increment a USB interface's PM-usage counter
+ * @intf: the usb_interface whose counter should be incremented
+ *
+ * This routine increments @intf's usage counter but does not carry out an
+ * autoresume.
+ *
+ * This routine can run in atomic context.
+ */
+void usb_autopm_get_interface_no_resume(struct usb_interface *intf)
+{
+	struct usb_device	*udev = interface_to_usbdev(intf);
+
+	usb_mark_last_busy(udev);
+	atomic_inc(&intf->pm_usage_cnt);
+	pm_runtime_get_noresume(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
+
+/* Internal routine to check whether we may autosuspend a device. */
+static int autosuspend_check(struct usb_device *udev)
+{
+	int			w, i;
+	struct usb_interface	*intf;
+
+	/* Fail if autosuspend is disabled, or any interfaces are in use, or
+	 * any interface drivers require remote wakeup but it isn't available.
+	 */
+	w = 0;
+	if (udev->actconfig) {
+		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+			intf = udev->actconfig->interface[i];
+
+			/* We don't need to check interfaces that are
+			 * disabled for runtime PM.  Either they are unbound
+			 * or else their drivers don't support autosuspend
+			 * and so they are permanently active.
+			 */
+			if (intf->dev.power.disable_depth)
+				continue;
+			if (atomic_read(&intf->dev.power.usage_count) > 0)
+				return -EBUSY;
+			w |= intf->needs_remote_wakeup;
+
+			/* Don't allow autosuspend if the device will need
+			 * a reset-resume and any of its interface drivers
+			 * doesn't include support or needs remote wakeup.
+			 */
+			if (udev->quirks & USB_QUIRK_RESET_RESUME) {
+				struct usb_driver *driver;
+
+				driver = to_usb_driver(intf->dev.driver);
+				if (!driver->reset_resume ||
+						intf->needs_remote_wakeup)
+					return -EOPNOTSUPP;
+			}
+		}
+	}
+	if (w && !device_can_wakeup(&udev->dev)) {
+		dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n");
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * If the device is a direct child of the root hub and the HCD
+	 * doesn't handle wakeup requests, don't allow autosuspend when
+	 * wakeup is needed.
+	 */
+	if (w && udev->parent == udev->bus->root_hub &&
+			bus_to_hcd(udev->bus)->cant_recv_wakeups) {
+		dev_dbg(&udev->dev, "HCD doesn't handle wakeup requests\n");
+		return -EOPNOTSUPP;
+	}
+
+	udev->do_remote_wakeup = w;
+	return 0;
+}
+
+int usb_runtime_suspend(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* A USB device can be suspended if it passes the various autosuspend
+	 * checks.  Runtime suspend for a USB device means suspending all the
+	 * interfaces and then the device itself.
+	 */
+	if (autosuspend_check(udev) != 0)
+		return -EAGAIN;
+
+	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
+
+	/* Allow a retry if autosuspend failed temporarily */
+	if (status == -EAGAIN || status == -EBUSY)
+		usb_mark_last_busy(udev);
+
+	/*
+	 * The PM core reacts badly unless the return code is 0,
+	 * -EAGAIN, or -EBUSY, so always return -EBUSY on an error
+	 * (except for root hubs, because they don't suspend through
+	 * an upstream port like other USB devices).
+	 */
+	if (status != 0 && udev->parent)
+		return -EBUSY;
+	return status;
+}
+
+int usb_runtime_resume(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
+	/* Runtime resume for a USB device means resuming both the device
+	 * and all its interfaces.
+	 */
+	status = usb_resume_both(udev, PMSG_AUTO_RESUME);
+	return status;
+}
+
+int usb_runtime_idle(struct device *dev)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+
+	/* An idle USB device can be suspended if it passes the various
+	 * autosuspend checks.
+	 */
+	if (autosuspend_check(udev) == 0)
+		pm_runtime_autosuspend(dev);
+	/* Tell the core not to suspend it, though. */
+	return -EBUSY;
+}
+
+int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret = -EPERM;
+
+	if (enable && !udev->usb2_hw_lpm_allowed)
+		return 0;
+
+	if (hcd->driver->set_usb2_hw_lpm) {
+		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
+		if (!ret)
+			udev->usb2_hw_lpm_enabled = enable;
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_PM */
+
+struct bus_type usb_bus_type = {
+	.name =		"usb",
+	.match =	usb_device_match,
+	.uevent =	usb_uevent,
+};
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
new file mode 100644
index 000000000..39a24021f
--- /dev/null
+++ b/drivers/usb/core/endpoint.c
@@ -0,0 +1,217 @@
+/*
+ * drivers/usb/core/endpoint.c
+ *
+ * (C) Copyright 2002,2004,2006 Greg Kroah-Hartman
+ * (C) Copyright 2002,2004 IBM Corp.
+ * (C) Copyright 2006 Novell Inc.
+ *
+ * Endpoint sysfs stuff
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include "usb.h"
+
+struct ep_device {
+	struct usb_endpoint_descriptor *desc;
+	struct usb_device *udev;
+	struct device dev;
+};
+#define to_ep_device(_dev) \
+	container_of(_dev, struct ep_device, dev)
+
+struct ep_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct usb_device *,
+			struct usb_endpoint_descriptor *, char *);
+};
+#define to_ep_attribute(_attr) \
+	container_of(_attr, struct ep_attribute, attr)
+
+#define usb_ep_attr(field, format_string)			\
+static ssize_t field##_show(struct device *dev,			\
+			       struct device_attribute *attr,	\
+			       char *buf)			\
+{								\
+	struct ep_device *ep = to_ep_device(dev);		\
+	return sprintf(buf, format_string, ep->desc->field);	\
+}								\
+static DEVICE_ATTR_RO(field)
+
+usb_ep_attr(bLength, "%02x\n");
+usb_ep_attr(bEndpointAddress, "%02x\n");
+usb_ep_attr(bmAttributes, "%02x\n");
+usb_ep_attr(bInterval, "%02x\n");
+
+static ssize_t wMaxPacketSize_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	return sprintf(buf, "%04x\n",
+		        usb_endpoint_maxp(ep->desc) & 0x07ff);
+}
+static DEVICE_ATTR_RO(wMaxPacketSize);
+
+static ssize_t type_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	char *type = "unknown";
+
+	switch (usb_endpoint_type(ep->desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		type = "Control";
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		type = "Isoc";
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		type = "Bulk";
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		type = "Interrupt";
+		break;
+	}
+	return sprintf(buf, "%s\n", type);
+}
+static DEVICE_ATTR_RO(type);
+
+static ssize_t interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	char unit;
+	unsigned interval = 0;
+	unsigned in;
+
+	in = (ep->desc->bEndpointAddress & USB_DIR_IN);
+
+	switch (usb_endpoint_type(ep->desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		if (ep->udev->speed == USB_SPEED_HIGH)
+			/* uframes per NAK */
+			interval = ep->desc->bInterval;
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		interval = 1 << (ep->desc->bInterval - 1);
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		if (ep->udev->speed == USB_SPEED_HIGH && !in)
+			/* uframes per NAK */
+			interval = ep->desc->bInterval;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (ep->udev->speed == USB_SPEED_HIGH)
+			interval = 1 << (ep->desc->bInterval - 1);
+		else
+			interval = ep->desc->bInterval;
+		break;
+	}
+	interval *= (ep->udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
+	if (interval % 1000)
+		unit = 'u';
+	else {
+		unit = 'm';
+		interval /= 1000;
+	}
+
+	return sprintf(buf, "%d%cs\n", interval, unit);
+}
+static DEVICE_ATTR_RO(interval);
+
+static ssize_t direction_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct ep_device *ep = to_ep_device(dev);
+	char *direction;
+
+	if (usb_endpoint_xfer_control(ep->desc))
+		direction = "both";
+	else if (usb_endpoint_dir_in(ep->desc))
+		direction = "in";
+	else
+		direction = "out";
+	return sprintf(buf, "%s\n", direction);
+}
+static DEVICE_ATTR_RO(direction);
+
+static struct attribute *ep_dev_attrs[] = {
+	&dev_attr_bLength.attr,
+	&dev_attr_bEndpointAddress.attr,
+	&dev_attr_bmAttributes.attr,
+	&dev_attr_bInterval.attr,
+	&dev_attr_wMaxPacketSize.attr,
+	&dev_attr_interval.attr,
+	&dev_attr_type.attr,
+	&dev_attr_direction.attr,
+	NULL,
+};
+static struct attribute_group ep_dev_attr_grp = {
+	.attrs = ep_dev_attrs,
+};
+static const struct attribute_group *ep_dev_groups[] = {
+	&ep_dev_attr_grp,
+	NULL
+};
+
+static void ep_device_release(struct device *dev)
+{
+	struct ep_device *ep_dev = to_ep_device(dev);
+
+	kfree(ep_dev);
+}
+
+struct device_type usb_ep_device_type = {
+	.name =		"usb_endpoint",
+	.release = ep_device_release,
+};
+
+int usb_create_ep_devs(struct device *parent,
+			struct usb_host_endpoint *endpoint,
+			struct usb_device *udev)
+{
+	struct ep_device *ep_dev;
+	int retval;
+
+	ep_dev = kzalloc(sizeof(*ep_dev), GFP_KERNEL);
+	if (!ep_dev) {
+		retval = -ENOMEM;
+		goto exit;
+	}
+
+	ep_dev->desc = &endpoint->desc;
+	ep_dev->udev = udev;
+	ep_dev->dev.groups = ep_dev_groups;
+	ep_dev->dev.type = &usb_ep_device_type;
+	ep_dev->dev.parent = parent;
+	dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress);
+
+	retval = device_register(&ep_dev->dev);
+	if (retval)
+		goto error_register;
+
+	device_enable_async_suspend(&ep_dev->dev);
+	endpoint->ep_dev = ep_dev;
+	return retval;
+
+error_register:
+	put_device(&ep_dev->dev);
+exit:
+	return retval;
+}
+
+void usb_remove_ep_devs(struct usb_host_endpoint *endpoint)
+{
+	struct ep_device *ep_dev = endpoint->ep_dev;
+
+	if (ep_dev) {
+		device_unregister(&ep_dev->dev);
+		endpoint->ep_dev = NULL;
+	}
+}
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
new file mode 100644
index 000000000..ea337a718
--- /dev/null
+++ b/drivers/usb/core/file.c
@@ -0,0 +1,245 @@
+/*
+ * drivers/usb/core/file.c
+ *
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999 (new USB architecture)
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
+ *	more docs, etc)
+ * (C) Copyright Yggdrasil Computing, Inc. 2000
+ *     (usb_device_id matching changes by Adam J. Richter)
+ * (C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+
+#define MAX_USB_MINORS	256
+static const struct file_operations *usb_minors[MAX_USB_MINORS];
+static DECLARE_RWSEM(minor_rwsem);
+
+static int usb_open(struct inode *inode, struct file *file)
+{
+	int err = -ENODEV;
+	const struct file_operations *new_fops;
+
+	down_read(&minor_rwsem);
+	new_fops = fops_get(usb_minors[iminor(inode)]);
+
+	if (!new_fops)
+		goto done;
+
+	replace_fops(file, new_fops);
+	/* Curiouser and curiouser... NULL ->open() as "no device" ? */
+	if (file->f_op->open)
+		err = file->f_op->open(inode, file);
+ done:
+	up_read(&minor_rwsem);
+	return err;
+}
+
+static const struct file_operations usb_fops = {
+	.owner =	THIS_MODULE,
+	.open =		usb_open,
+	.llseek =	noop_llseek,
+};
+
+static struct usb_class {
+	struct kref kref;
+	struct class *class;
+} *usb_class;
+
+static char *usb_devnode(struct device *dev, umode_t *mode)
+{
+	struct usb_class_driver *drv;
+
+	drv = dev_get_drvdata(dev);
+	if (!drv || !drv->devnode)
+		return NULL;
+	return drv->devnode(dev, mode);
+}
+
+static int init_usb_class(void)
+{
+	int result = 0;
+
+	if (usb_class != NULL) {
+		kref_get(&usb_class->kref);
+		goto exit;
+	}
+
+	usb_class = kmalloc(sizeof(*usb_class), GFP_KERNEL);
+	if (!usb_class) {
+		result = -ENOMEM;
+		goto exit;
+	}
+
+	kref_init(&usb_class->kref);
+	usb_class->class = class_create(THIS_MODULE, "usbmisc");
+	if (IS_ERR(usb_class->class)) {
+		result = PTR_ERR(usb_class->class);
+		printk(KERN_ERR "class_create failed for usb devices\n");
+		kfree(usb_class);
+		usb_class = NULL;
+		goto exit;
+	}
+	usb_class->class->devnode = usb_devnode;
+
+exit:
+	return result;
+}
+
+static void release_usb_class(struct kref *kref)
+{
+	/* Ok, we cheat as we know we only have one usb_class */
+	class_destroy(usb_class->class);
+	kfree(usb_class);
+	usb_class = NULL;
+}
+
+static void destroy_usb_class(void)
+{
+	if (usb_class)
+		kref_put(&usb_class->kref, release_usb_class);
+}
+
+int usb_major_init(void)
+{
+	int error;
+
+	error = register_chrdev(USB_MAJOR, "usb", &usb_fops);
+	if (error)
+		printk(KERN_ERR "Unable to get major %d for usb devices\n",
+		       USB_MAJOR);
+
+	return error;
+}
+
+void usb_major_cleanup(void)
+{
+	unregister_chrdev(USB_MAJOR, "usb");
+}
+
+/**
+ * usb_register_dev - register a USB device, and ask for a minor number
+ * @intf: pointer to the usb_interface that is being registered
+ * @class_driver: pointer to the usb_class_driver for this device
+ *
+ * This should be called by all USB drivers that use the USB major number.
+ * If CONFIG_USB_DYNAMIC_MINORS is enabled, the minor number will be
+ * dynamically allocated out of the list of available ones.  If it is not
+ * enabled, the minor number will be based on the next available free minor,
+ * starting at the class_driver->minor_base.
+ *
+ * This function also creates a usb class device in the sysfs tree.
+ *
+ * usb_deregister_dev() must be called when the driver is done with
+ * the minor numbers given out by this function.
+ *
+ * Return: -EINVAL if something bad happens with trying to register a
+ * device, and 0 on success.
+ */
+int usb_register_dev(struct usb_interface *intf,
+		     struct usb_class_driver *class_driver)
+{
+	int retval;
+	int minor_base = class_driver->minor_base;
+	int minor;
+	char name[20];
+	char *temp;
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+	/*
+	 * We don't care what the device tries to start at, we want to start
+	 * at zero to pack the devices into the smallest available space with
+	 * no holes in the minor range.
+	 */
+	minor_base = 0;
+#endif
+
+	if (class_driver->fops == NULL)
+		return -EINVAL;
+	if (intf->minor >= 0)
+		return -EADDRINUSE;
+
+	retval = init_usb_class();
+	if (retval)
+		return retval;
+
+	dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base);
+
+	down_write(&minor_rwsem);
+	for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
+		if (usb_minors[minor])
+			continue;
+
+		usb_minors[minor] = class_driver->fops;
+		intf->minor = minor;
+		break;
+	}
+	up_write(&minor_rwsem);
+	if (intf->minor < 0)
+		return -EXFULL;
+
+	/* create a usb class device for this usb interface */
+	snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
+	temp = strrchr(name, '/');
+	if (temp && (temp[1] != '\0'))
+		++temp;
+	else
+		temp = name;
+	intf->usb_dev = device_create(usb_class->class, &intf->dev,
+				      MKDEV(USB_MAJOR, minor), class_driver,
+				      "%s", temp);
+	if (IS_ERR(intf->usb_dev)) {
+		down_write(&minor_rwsem);
+		usb_minors[minor] = NULL;
+		intf->minor = -1;
+		up_write(&minor_rwsem);
+		retval = PTR_ERR(intf->usb_dev);
+	}
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_register_dev);
+
+/**
+ * usb_deregister_dev - deregister a USB device's dynamic minor.
+ * @intf: pointer to the usb_interface that is being deregistered
+ * @class_driver: pointer to the usb_class_driver for this device
+ *
+ * Used in conjunction with usb_register_dev().  This function is called
+ * when the USB driver is finished with the minor numbers gotten from a
+ * call to usb_register_dev() (usually when the device is disconnected
+ * from the system.)
+ *
+ * This function also removes the usb class device from the sysfs tree.
+ *
+ * This should be called by all drivers that use the USB major number.
+ */
+void usb_deregister_dev(struct usb_interface *intf,
+			struct usb_class_driver *class_driver)
+{
+	if (intf->minor == -1)
+		return;
+
+	dev_dbg(&intf->dev, "removing %d minor\n", intf->minor);
+
+	down_write(&minor_rwsem);
+	usb_minors[intf->minor] = NULL;
+	up_write(&minor_rwsem);
+
+	device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+	intf->usb_dev = NULL;
+	intf->minor = -1;
+	destroy_usb_class();
+}
+EXPORT_SYMBOL_GPL(usb_deregister_dev);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
new file mode 100644
index 000000000..358ca8dd7
--- /dev/null
+++ b/drivers/usb/core/generic.c
@@ -0,0 +1,247 @@
+/*
+ * drivers/usb/generic.c - generic driver for USB devices (not interfaces)
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * based on drivers/usb/usb.c which had the following copyrights:
+ *	(C) Copyright Linus Torvalds 1999
+ *	(C) Copyright Johannes Erdfelt 1999-2001
+ *	(C) Copyright Andreas Gal 1999
+ *	(C) Copyright Gregory P. Smith 1999
+ *	(C) Copyright Deti Fliegl 1999 (new USB architecture)
+ *	(C) Copyright Randy Dunlap 2000
+ *	(C) Copyright David Brownell 2000-2004
+ *	(C) Copyright Yggdrasil Computing, Inc. 2000
+ *		(usb_device_id matching changes by Adam J. Richter)
+ *	(C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+static inline const char *plural(int n)
+{
+	return (n == 1 ? "" : "s");
+}
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_COMM
+		&& desc->bInterfaceSubClass == 2
+		&& desc->bInterfaceProtocol == 0xff;
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+	return desc->bInterfaceClass == USB_CLASS_MISC
+		&& desc->bInterfaceSubClass == 1
+		&& desc->bInterfaceProtocol == 1;
+}
+
+int usb_choose_configuration(struct usb_device *udev)
+{
+	int i;
+	int num_configs;
+	int insufficient_power = 0;
+	struct usb_host_config *c, *best;
+
+	if (usb_device_is_owned(udev))
+		return 0;
+
+	best = NULL;
+	c = udev->config;
+	num_configs = udev->descriptor.bNumConfigurations;
+	for (i = 0; i < num_configs; (i++, c++)) {
+		struct usb_interface_descriptor	*desc = NULL;
+
+		/* It's possible that a config has no interfaces! */
+		if (c->desc.bNumInterfaces > 0)
+			desc = &c->intf_cache[0]->altsetting->desc;
+
+		/*
+		 * HP's USB bus-powered keyboard has only one configuration
+		 * and it claims to be self-powered; other devices may have
+		 * similar errors in their descriptors.  If the next test
+		 * were allowed to execute, such configurations would always
+		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
+		 */
+#if 0
+		/* Rule out self-powered configs for a bus-powered device */
+		if (bus_powered && (c->desc.bmAttributes &
+					USB_CONFIG_ATT_SELFPOWER))
+			continue;
+#endif
+
+		/*
+		 * The next test may not be as effective as it should be.
+		 * Some hubs have errors in their descriptor, claiming
+		 * to be self-powered when they are really bus-powered.
+		 * We will overestimate the amount of current such hubs
+		 * make available for each port.
+		 *
+		 * This is a fairly benign sort of failure.  It won't
+		 * cause us to reject configurations that we should have
+		 * accepted.
+		 */
+
+		/* Rule out configs that draw too much bus current */
+		if (usb_get_max_power(udev, c) > udev->bus_mA) {
+			insufficient_power++;
+			continue;
+		}
+
+		/* When the first config's first interface is one of Microsoft's
+		 * pet nonstandard Ethernet-over-USB protocols, ignore it unless
+		 * this kernel has enabled the necessary host side driver.
+		 * But: Don't ignore it if it's the only config.
+		 */
+		if (i == 0 && num_configs > 1 && desc &&
+				(is_rndis(desc) || is_activesync(desc))) {
+#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
+			continue;
+#else
+			best = c;
+#endif
+		}
+
+		/* From the remaining configs, choose the first one whose
+		 * first interface is for a non-vendor-specific class.
+		 * Reason: Linux is more likely to have a class driver
+		 * than a vendor-specific driver. */
+		else if (udev->descriptor.bDeviceClass !=
+						USB_CLASS_VENDOR_SPEC &&
+				(desc && desc->bInterfaceClass !=
+						USB_CLASS_VENDOR_SPEC)) {
+			best = c;
+			break;
+		}
+
+		/* If all the remaining configs are vendor-specific,
+		 * choose the first one. */
+		else if (!best)
+			best = c;
+	}
+
+	if (insufficient_power > 0)
+		dev_info(&udev->dev, "rejected %d configuration%s "
+			"due to insufficient available bus power\n",
+			insufficient_power, plural(insufficient_power));
+
+	if (best) {
+		i = best->desc.bConfigurationValue;
+		dev_dbg(&udev->dev,
+			"configuration #%d chosen from %d choice%s\n",
+			i, num_configs, plural(num_configs));
+	} else {
+		i = -1;
+		dev_warn(&udev->dev,
+			"no configuration chosen from %d choice%s\n",
+			num_configs, plural(num_configs));
+	}
+	return i;
+}
+EXPORT_SYMBOL_GPL(usb_choose_configuration);
+
+static int generic_probe(struct usb_device *udev)
+{
+	int err, c;
+
+	/* Choose and set the configuration.  This registers the interfaces
+	 * with the driver core and lets interface drivers bind to them.
+	 */
+	if (udev->authorized == 0)
+		dev_err(&udev->dev, "Device is not authorized for usage\n");
+	else {
+		c = usb_choose_configuration(udev);
+		if (c >= 0) {
+			err = usb_set_configuration(udev, c);
+			if (err && err != -ENODEV) {
+				dev_err(&udev->dev, "can't set config #%d, error %d\n",
+					c, err);
+				/* This need not be fatal.  The user can try to
+				 * set other configurations. */
+			}
+		}
+	}
+	/* USB device state == configured ... usable */
+	usb_notify_add_device(udev);
+
+	return 0;
+}
+
+static void generic_disconnect(struct usb_device *udev)
+{
+	usb_notify_remove_device(udev);
+
+	/* if this is only an unbind, not a physical disconnect, then
+	 * unconfigure the device */
+	if (udev->actconfig)
+		usb_set_configuration(udev, -1);
+}
+
+#ifdef	CONFIG_PM
+
+static int generic_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	int rc;
+
+	/* Normal USB devices suspend through their upstream port.
+	 * Root hubs don't have upstream ports to suspend,
+	 * so we have to shut down their downstream HC-to-USB
+	 * interfaces manually by doing a bus (or "global") suspend.
+	 */
+	if (!udev->parent)
+		rc = hcd_bus_suspend(udev, msg);
+
+	/* Non-root devices don't need to do anything for FREEZE or PRETHAW */
+	else if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW)
+		rc = 0;
+	else
+		rc = usb_port_suspend(udev, msg);
+
+	return rc;
+}
+
+static int generic_resume(struct usb_device *udev, pm_message_t msg)
+{
+	int rc;
+
+	/* Normal USB devices resume/reset through their upstream port.
+	 * Root hubs don't have upstream ports to resume or reset,
+	 * so we have to start up their downstream HC-to-USB
+	 * interfaces manually by doing a bus (or "global") resume.
+	 */
+	if (!udev->parent)
+		rc = hcd_bus_resume(udev, msg);
+	else
+		rc = usb_port_resume(udev, msg);
+	return rc;
+}
+
+#endif	/* CONFIG_PM */
+
+struct usb_device_driver usb_generic_driver = {
+	.name =	"usb",
+	.probe = generic_probe,
+	.disconnect = generic_disconnect,
+#ifdef	CONFIG_PM
+	.suspend = generic_suspend,
+	.resume = generic_resume,
+#endif
+	.supports_autosuspend = 1,
+};
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
new file mode 100644
index 000000000..9eb1cff28
--- /dev/null
+++ b/drivers/usb/core/hcd-pci.c
@@ -0,0 +1,647 @@
+/*
+ * (C) Copyright David Brownell 2000-2002
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#endif
+
+#include "usb.h"
+
+
+/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
+
+/*
+ * Coordinate handoffs between EHCI and companion controllers
+ * during EHCI probing and system resume.
+ */
+
+static DECLARE_RWSEM(companions_rwsem);
+
+#define CL_UHCI		PCI_CLASS_SERIAL_USB_UHCI
+#define CL_OHCI		PCI_CLASS_SERIAL_USB_OHCI
+#define CL_EHCI		PCI_CLASS_SERIAL_USB_EHCI
+
+static inline int is_ohci_or_uhci(struct pci_dev *pdev)
+{
+	return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
+}
+
+typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd);
+
+/* Iterate over PCI devices in the same slot as pdev and call fn for each */
+static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
+		companion_fn fn)
+{
+	struct pci_dev		*companion;
+	struct usb_hcd		*companion_hcd;
+	unsigned int		slot = PCI_SLOT(pdev->devfn);
+
+	/*
+	 * Iterate through other PCI functions in the same slot.
+	 * If the function's drvdata isn't set then it isn't bound to
+	 * a USB host controller driver, so skip it.
+	 */
+	companion = NULL;
+	for_each_pci_dev(companion) {
+		if (companion->bus != pdev->bus ||
+				PCI_SLOT(companion->devfn) != slot)
+			continue;
+		companion_hcd = pci_get_drvdata(companion);
+		if (!companion_hcd || !companion_hcd->self.root_hub)
+			continue;
+		fn(pdev, hcd, companion, companion_hcd);
+	}
+}
+
+/*
+ * We're about to add an EHCI controller, which will unceremoniously grab
+ * all the port connections away from its companions.  To prevent annoying
+ * error messages, lock the companion's root hub and gracefully unconfigure
+ * it beforehand.  Leave it locked until the EHCI controller is all set.
+ */
+static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	struct usb_device *udev;
+
+	if (is_ohci_or_uhci(companion)) {
+		udev = companion_hcd->self.root_hub;
+		usb_lock_device(udev);
+		usb_set_configuration(udev, 0);
+	}
+}
+
+/*
+ * Adding the EHCI controller has either succeeded or failed.  Set the
+ * companion pointer accordingly, and in either case, reconfigure and
+ * unlock the root hub.
+ */
+static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	struct usb_device *udev;
+
+	if (is_ohci_or_uhci(companion)) {
+		if (dev_get_drvdata(&pdev->dev)) {	/* Succeeded */
+			dev_dbg(&pdev->dev, "HS companion for %s\n",
+					dev_name(&companion->dev));
+			companion_hcd->self.hs_companion = &hcd->self;
+		}
+		udev = companion_hcd->self.root_hub;
+		usb_set_configuration(udev, 1);
+		usb_unlock_device(udev);
+	}
+}
+
+/*
+ * We just added a non-EHCI controller.  Find the EHCI controller to
+ * which it is a companion, and store a pointer to the bus structure.
+ */
+static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
+		dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
+				dev_name(&companion->dev));
+		hcd->self.hs_companion = &companion_hcd->self;
+	}
+}
+
+/* We are removing an EHCI controller.  Clear the companions' pointers. */
+static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(companion))
+		companion_hcd->self.hs_companion = NULL;
+}
+
+#ifdef	CONFIG_PM
+
+/* An EHCI controller must wait for its companions before resuming. */
+static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
+		struct pci_dev *companion, struct usb_hcd *companion_hcd)
+{
+	if (is_ohci_or_uhci(companion))
+		device_pm_wait_for_dev(&pdev->dev, &companion->dev);
+}
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/**
+ * usb_hcd_pci_probe - initialize PCI-based HCDs
+ * @dev: USB Host Controller being probed
+ * @id: pci hotplug id connecting controller to HCD framework
+ * Context: !in_interrupt()
+ *
+ * Allocates basic PCI resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ * Store this function in the HCD's struct pci_driver as probe().
+ *
+ * Return: 0 if successful.
+ */
+int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct hc_driver	*driver;
+	struct usb_hcd		*hcd;
+	int			retval;
+	int			hcd_irq = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (!id)
+		return -EINVAL;
+	driver = (struct hc_driver *)id->driver_data;
+	if (!driver)
+		return -EINVAL;
+
+	if (pci_enable_device(dev) < 0)
+		return -ENODEV;
+
+	/*
+	 * The xHCI driver has its own irq management
+	 * make sure irq setup is not touched for xhci in generic hcd code
+	 */
+	if ((driver->flags & HCD_MASK) != HCD_USB3) {
+		if (!dev->irq) {
+			dev_err(&dev->dev,
+			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+				pci_name(dev));
+			retval = -ENODEV;
+			goto disable_pci;
+		}
+		hcd_irq = dev->irq;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto disable_pci;
+	}
+
+	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
+			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+
+	if (driver->flags & HCD_MEMORY) {
+		/* EHCI, OHCI */
+		hcd->rsrc_start = pci_resource_start(dev, 0);
+		hcd->rsrc_len = pci_resource_len(dev, 0);
+		if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+			dev_dbg(&dev->dev, "controller already in use\n");
+			retval = -EBUSY;
+			goto put_hcd;
+		}
+		hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+		if (hcd->regs == NULL) {
+			dev_dbg(&dev->dev, "error mapping memory\n");
+			retval = -EFAULT;
+			goto release_mem_region;
+		}
+
+	} else {
+		/* UHCI */
+		int	region;
+
+		for (region = 0; region < PCI_ROM_RESOURCE; region++) {
+			if (!(pci_resource_flags(dev, region) &
+					IORESOURCE_IO))
+				continue;
+
+			hcd->rsrc_start = pci_resource_start(dev, region);
+			hcd->rsrc_len = pci_resource_len(dev, region);
+			if (request_region(hcd->rsrc_start, hcd->rsrc_len,
+					driver->description))
+				break;
+		}
+		if (region == PCI_ROM_RESOURCE) {
+			dev_dbg(&dev->dev, "no i/o regions available\n");
+			retval = -EBUSY;
+			goto put_hcd;
+		}
+	}
+
+	pci_set_master(dev);
+
+	/* Note: dev_set_drvdata must be called while holding the rwsem */
+	if (dev->class == CL_EHCI) {
+		down_write(&companions_rwsem);
+		dev_set_drvdata(&dev->dev, hcd);
+		for_each_companion(dev, hcd, ehci_pre_add);
+		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
+		if (retval != 0)
+			dev_set_drvdata(&dev->dev, NULL);
+		for_each_companion(dev, hcd, ehci_post_add);
+		up_write(&companions_rwsem);
+	} else {
+		down_read(&companions_rwsem);
+		dev_set_drvdata(&dev->dev, hcd);
+		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
+		if (retval != 0)
+			dev_set_drvdata(&dev->dev, NULL);
+		else
+			for_each_companion(dev, hcd, non_ehci_add);
+		up_read(&companions_rwsem);
+	}
+
+	if (retval != 0)
+		goto unmap_registers;
+	device_wakeup_enable(hcd->self.controller);
+
+	if (pci_dev_run_wake(dev))
+		pm_runtime_put_noidle(&dev->dev);
+	return retval;
+
+unmap_registers:
+	if (driver->flags & HCD_MEMORY) {
+		iounmap(hcd->regs);
+release_mem_region:
+		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	} else
+		release_region(hcd->rsrc_start, hcd->rsrc_len);
+put_hcd:
+	usb_put_hcd(hcd);
+disable_pci:
+	pci_disable_device(dev);
+	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_pci_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ * Store this function in the HCD's struct pci_driver as remove().
+ */
+void usb_hcd_pci_remove(struct pci_dev *dev)
+{
+	struct usb_hcd		*hcd;
+
+	hcd = pci_get_drvdata(dev);
+	if (!hcd)
+		return;
+
+	if (pci_dev_run_wake(dev))
+		pm_runtime_get_noresume(&dev->dev);
+
+	/* Fake an interrupt request in order to give the driver a chance
+	 * to test whether the controller hardware has been removed (e.g.,
+	 * cardbus physical eject).
+	 */
+	local_irq_disable();
+	usb_hcd_irq(0, hcd);
+	local_irq_enable();
+
+	/* Note: dev_set_drvdata must be called while holding the rwsem */
+	if (dev->class == CL_EHCI) {
+		down_write(&companions_rwsem);
+		for_each_companion(dev, hcd, ehci_remove);
+		usb_remove_hcd(hcd);
+		dev_set_drvdata(&dev->dev, NULL);
+		up_write(&companions_rwsem);
+	} else {
+		/* Not EHCI; just clear the companion pointer */
+		down_read(&companions_rwsem);
+		hcd->self.hs_companion = NULL;
+		usb_remove_hcd(hcd);
+		dev_set_drvdata(&dev->dev, NULL);
+		up_read(&companions_rwsem);
+	}
+
+	if (hcd->driver->flags & HCD_MEMORY) {
+		iounmap(hcd->regs);
+		release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	} else {
+		release_region(hcd->rsrc_start, hcd->rsrc_len);
+	}
+
+	usb_put_hcd(hcd);
+	pci_disable_device(dev);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
+
+/**
+ * usb_hcd_pci_shutdown - shutdown host controller
+ * @dev: USB Host Controller being shutdown
+ */
+void usb_hcd_pci_shutdown(struct pci_dev *dev)
+{
+	struct usb_hcd		*hcd;
+
+	hcd = pci_get_drvdata(dev);
+	if (!hcd)
+		return;
+
+	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
+			hcd->driver->shutdown) {
+		hcd->driver->shutdown(hcd);
+		if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
+			free_irq(hcd->irq, hcd);
+		pci_disable_device(dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
+
+#ifdef	CONFIG_PM
+
+#ifdef	CONFIG_PPC_PMAC
+static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{
+	/* Enanble or disable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node	*of_node;
+
+		of_node = pci_device_to_OF_node(pci_dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+					of_node, 0, enable);
+	}
+}
+
+#else
+
+static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
+{}
+
+#endif	/* CONFIG_PPC_PMAC */
+
+static int check_root_hub_suspended(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+
+	if (HCD_RH_RUNNING(hcd)) {
+		dev_warn(dev, "Root hub is not suspended\n");
+		return -EBUSY;
+	}
+	if (hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		if (HCD_RH_RUNNING(hcd)) {
+			dev_warn(dev, "Secondary root hub is not suspended\n");
+			return -EBUSY;
+		}
+	}
+	return 0;
+}
+
+static int suspend_common(struct device *dev, bool do_wakeup)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	/* Root hub suspend should have stopped all downstream traffic,
+	 * and all bus master traffic.  And done so for both the interface
+	 * and the stub usb_device (which we check here).  But maybe it
+	 * didn't; writing sysfs power/state files ignores such rules...
+	 */
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
+
+	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
+		/* Optimization: Don't suspend if a root-hub wakeup is
+		 * pending and it would cause the HCD to wake up anyway.
+		 */
+		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
+			return -EBUSY;
+		if (do_wakeup && hcd->shared_hcd &&
+				HCD_WAKEUP_PENDING(hcd->shared_hcd))
+			return -EBUSY;
+		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
+		suspend_report_result(hcd->driver->pci_suspend, retval);
+
+		/* Check again in case wakeup raced with pci_suspend */
+		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
+				(retval == 0 && do_wakeup && hcd->shared_hcd &&
+				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
+			if (hcd->driver->pci_resume)
+				hcd->driver->pci_resume(hcd, false);
+			retval = -EBUSY;
+		}
+		if (retval)
+			return retval;
+	}
+
+	/* If MSI-X is enabled, the driver will have synchronized all vectors
+	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
+	 * synchronized here.
+	 */
+	if (!hcd->msix_enabled)
+		synchronize_irq(pci_dev->irq);
+
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling).  We'll enter a
+	 * low power state during suspend_noirq, if the hardware allows.
+	 */
+	pci_disable_device(pci_dev);
+	return retval;
+}
+
+static int resume_common(struct device *dev, int event)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	if (HCD_RH_RUNNING(hcd) ||
+			(hcd->shared_hcd &&
+			 HCD_RH_RUNNING(hcd->shared_hcd))) {
+		dev_dbg(dev, "can't resume, not suspended!\n");
+		return 0;
+	}
+
+	retval = pci_enable_device(pci_dev);
+	if (retval < 0) {
+		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
+		return retval;
+	}
+
+	pci_set_master(pci_dev);
+
+	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
+
+		/*
+		 * Only EHCI controllers have to wait for their companions.
+		 * No locking is needed because PCI controller drivers do not
+		 * get unbound during system resume.
+		 */
+		if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
+			for_each_companion(pci_dev, hcd,
+					ehci_wait_for_companions);
+
+		retval = hcd->driver->pci_resume(hcd,
+				event == PM_EVENT_RESTORE);
+		if (retval) {
+			dev_err(dev, "PCI post-resume error %d!\n", retval);
+			if (hcd->shared_hcd)
+				usb_hc_died(hcd->shared_hcd);
+			usb_hc_died(hcd);
+		}
+	}
+	return retval;
+}
+
+#ifdef	CONFIG_PM_SLEEP
+
+static int hcd_pci_suspend(struct device *dev)
+{
+	return suspend_common(dev, device_may_wakeup(dev));
+}
+
+static int hcd_pci_suspend_noirq(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+	int			retval;
+
+	retval = check_root_hub_suspended(dev);
+	if (retval)
+		return retval;
+
+	pci_save_state(pci_dev);
+
+	/* If the root hub is dead rather than suspended, disallow remote
+	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
+	 * dying, so we only need to check the primary roothub.
+	 */
+	if (HCD_DEAD(hcd))
+		device_set_wakeup_enable(dev, 0);
+	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
+
+	/* Possibly enable remote wakeup,
+	 * choose the appropriate low-power state, and go to that state.
+	 */
+	retval = pci_prepare_to_sleep(pci_dev);
+	if (retval == -EIO) {		/* Low-power not supported */
+		dev_dbg(dev, "--> PCI D0 legacy\n");
+		retval = 0;
+	} else if (retval == 0) {
+		dev_dbg(dev, "--> PCI %s\n",
+				pci_power_name(pci_dev->current_state));
+	} else {
+		suspend_report_result(pci_prepare_to_sleep, retval);
+		return retval;
+	}
+
+	powermac_set_asic(pci_dev, 0);
+	return retval;
+}
+
+static int hcd_pci_resume_noirq(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+
+	powermac_set_asic(pci_dev, 1);
+
+	/* Go back to D0 and disable remote wakeup */
+	pci_back_from_sleep(pci_dev);
+	return 0;
+}
+
+static int hcd_pci_resume(struct device *dev)
+{
+	return resume_common(dev, PM_EVENT_RESUME);
+}
+
+static int hcd_pci_restore(struct device *dev)
+{
+	return resume_common(dev, PM_EVENT_RESTORE);
+}
+
+#else
+
+#define hcd_pci_suspend		NULL
+#define hcd_pci_suspend_noirq	NULL
+#define hcd_pci_resume_noirq	NULL
+#define hcd_pci_resume		NULL
+#define hcd_pci_restore		NULL
+
+#endif	/* CONFIG_PM_SLEEP */
+
+static int hcd_pci_runtime_suspend(struct device *dev)
+{
+	int	retval;
+
+	retval = suspend_common(dev, true);
+	if (retval == 0)
+		powermac_set_asic(to_pci_dev(dev), 0);
+	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
+	return retval;
+}
+
+static int hcd_pci_runtime_resume(struct device *dev)
+{
+	int	retval;
+
+	powermac_set_asic(to_pci_dev(dev), 1);
+	retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
+	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
+	return retval;
+}
+
+const struct dev_pm_ops usb_hcd_pci_pm_ops = {
+	.suspend	= hcd_pci_suspend,
+	.suspend_noirq	= hcd_pci_suspend_noirq,
+	.resume_noirq	= hcd_pci_resume_noirq,
+	.resume		= hcd_pci_resume,
+	.freeze		= check_root_hub_suspended,
+	.freeze_noirq	= check_root_hub_suspended,
+	.thaw_noirq	= NULL,
+	.thaw		= NULL,
+	.poweroff	= hcd_pci_suspend,
+	.poweroff_noirq	= hcd_pci_suspend_noirq,
+	.restore_noirq	= hcd_pci_resume_noirq,
+	.restore	= hcd_pci_restore,
+	.runtime_suspend = hcd_pci_runtime_suspend,
+	.runtime_resume	= hcd_pci_runtime_resume,
+};
+EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
+
+#endif	/* CONFIG_PM */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
new file mode 100644
index 000000000..1c1385e3a
--- /dev/null
+++ b/drivers/usb/core/hcd.c
@@ -0,0 +1,2967 @@
+/*
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2002
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bcd.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/utsname.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
+#include <linux/types.h>
+
+#include <linux/phy/phy.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
+
+#include "usb.h"
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver framework
+ *
+ * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
+ * HCD-specific behaviors/bugs.
+ *
+ * This does error checks, tracks devices and urbs, and delegates to a
+ * "hc_driver" only for code (and data) that really needs to know about
+ * hardware differences.  That includes root hub registers, i/o queues,
+ * and so on ... but as little else as possible.
+ *
+ * Shared code includes most of the "root hub" code (these are emulated,
+ * though each HC's hardware works differently) and PCI glue, plus request
+ * tracking overhead.  The HCD code should only block on spinlocks or on
+ * hardware handshaking; blocking on software events (such as other kernel
+ * threads releasing resources, or completing actions) is all generic.
+ *
+ * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
+ * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
+ * only by the hub driver ... and that neither should be seen or used by
+ * usb client device drivers.
+ *
+ * Contributors of ideas or unattributed patches include: David Brownell,
+ * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
+ *
+ * HISTORY:
+ * 2002-02-21	Pull in most of the usb_bus support from usb.c; some
+ *		associated cleanup.  "usb_hcd" still != "usb_bus".
+ * 2001-12-12	Initial patch version for Linux 2.5.1 kernel.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* Keep track of which host controller drivers are loaded */
+unsigned long usb_hcds_loaded;
+EXPORT_SYMBOL_GPL(usb_hcds_loaded);
+
+/* host controllers we manage */
+LIST_HEAD (usb_bus_list);
+EXPORT_SYMBOL_GPL (usb_bus_list);
+
+/* used when allocating bus numbers */
+#define USB_MAXBUS		64
+static DECLARE_BITMAP(busmap, USB_MAXBUS);
+
+/* used when updating list of hcds */
+DEFINE_MUTEX(usb_bus_list_lock);	/* exported only for usbfs */
+EXPORT_SYMBOL_GPL (usb_bus_list_lock);
+
+/* used for controlling access to virtual root hubs */
+static DEFINE_SPINLOCK(hcd_root_hub_lock);
+
+/* used when updating an endpoint's URB list */
+static DEFINE_SPINLOCK(hcd_urb_list_lock);
+
+/* used to protect against unlinking URBs after the device is gone */
+static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
+
+/* wait queue for synchronous unlinks */
+DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
+
+static inline int is_root_hub(struct usb_device *udev)
+{
+	return (udev->parent == NULL);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Sharable chunks of root hub code.
+ */
+
+/*-------------------------------------------------------------------------*/
+#define KERNEL_REL	bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
+#define KERNEL_VER	bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
+
+/* usb 3.0 root hub device descriptor */
+static const u8 usb3_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
+	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
+static const u8 usb25_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
+	0xFF,       /*  __u8  bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* usb 2.0 root hub device descriptor */
+static const u8 usb2_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x00, 0x02, /*  __le16 bcdUSB; v2.0 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
+	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
+
+/* usb 1.1 root hub device descriptor */
+static const u8 usb11_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x10, 0x01, /*  __le16 bcdUSB; v1.1 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ low/full speeds only ] */
+	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x01, 0x00, /*  __le16 idProduct; device 0x0001 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Configuration descriptors for our root hubs */
+
+static const u8 fs_rh_config_descriptor[] = {
+
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	0x02,       /*  __u8  bDescriptorType; Configuration */
+	0x19, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* USB 1.1:
+	 * USB 2.0, single TT organization (mandatory):
+	 *	one interface, protocol 0
+	 *
+	 * USB 2.0, multiple TT organization (optional):
+	 *	two interfaces, protocols 1 (like single TT)
+	 *	and 2 (multiple TT mode) ... config is
+	 *	sometimes settable
+	 *	NOT IMPLEMENTED
+	 */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+	0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+	0xff        /*  __u8  ep_bInterval; (255ms -- usb 2.0 spec) */
+};
+
+static const u8 hs_rh_config_descriptor[] = {
+
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	0x02,       /*  __u8  bDescriptorType; Configuration */
+	0x19, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* USB 1.1:
+	 * USB 2.0, single TT organization (mandatory):
+	 *	one interface, protocol 0
+	 *
+	 * USB 2.0, multiple TT organization (optional):
+	 *	two interfaces, protocols 1 (like single TT)
+	 *	and 2 (multiple TT mode) ... config is
+	 *	sometimes settable
+	 *	NOT IMPLEMENTED
+	 */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+		     * see hub.c:hub_configure() for details. */
+	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+	0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+};
+
+static const u8 ss_rh_config_descriptor[] = {
+	/* one configuration */
+	0x09,       /*  __u8  bLength; */
+	0x02,       /*  __u8  bDescriptorType; Configuration */
+	0x1f, 0x00, /*  __le16 wTotalLength; */
+	0x01,       /*  __u8  bNumInterfaces; (1) */
+	0x01,       /*  __u8  bConfigurationValue; */
+	0x00,       /*  __u8  iConfiguration; */
+	0xc0,       /*  __u8  bmAttributes;
+				 Bit 7: must be set,
+				     6: Self-powered,
+				     5: Remote wakeup,
+				     4..0: resvd */
+	0x00,       /*  __u8  MaxPower; */
+
+	/* one interface */
+	0x09,       /*  __u8  if_bLength; */
+	0x04,       /*  __u8  if_bDescriptorType; Interface */
+	0x00,       /*  __u8  if_bInterfaceNumber; */
+	0x00,       /*  __u8  if_bAlternateSetting; */
+	0x01,       /*  __u8  if_bNumEndpoints; */
+	0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,       /*  __u8  if_bInterfaceSubClass; */
+	0x00,       /*  __u8  if_bInterfaceProtocol; */
+	0x00,       /*  __u8  if_iInterface; */
+
+	/* one endpoint (status change endpoint) */
+	0x07,       /*  __u8  ep_bLength; */
+	0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,       /*  __u8  ep_bmAttributes; Interrupt */
+		    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+		     * see hub.c:hub_configure() for details. */
+	(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
+	0x0c,       /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
+
+	/* one SuperSpeed endpoint companion descriptor */
+	0x06,        /* __u8 ss_bLength */
+	0x30,        /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
+	0x00,        /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
+	0x00,        /* __u8 ss_bmAttributes; 1 packet per service interval */
+	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
+};
+
+/* authorized_default behaviour:
+ * -1 is authorized for all devices except wireless (old behaviour)
+ * 0 is unauthorized for all devices
+ * 1 is authorized for all devices
+ */
+static int authorized_default = -1;
+module_param(authorized_default, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(authorized_default,
+		"Default USB device authorization: 0 is not authorized, 1 is "
+		"authorized, -1 is authorized except for wireless USB (default, "
+		"old behaviour");
+/*-------------------------------------------------------------------------*/
+
+/**
+ * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
+ * @s: Null-terminated ASCII (actually ISO-8859-1) string
+ * @buf: Buffer for USB string descriptor (header + UTF-16LE)
+ * @len: Length (in bytes; may be odd) of descriptor buffer.
+ *
+ * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
+ * whichever is less.
+ *
+ * Note:
+ * USB String descriptors can contain at most 126 characters; input
+ * strings longer than that are truncated.
+ */
+static unsigned
+ascii2desc(char const *s, u8 *buf, unsigned len)
+{
+	unsigned n, t = 2 + 2*strlen(s);
+
+	if (t > 254)
+		t = 254;	/* Longest possible UTF string descriptor */
+	if (len > t)
+		len = t;
+
+	t += USB_DT_STRING << 8;	/* Now t is first 16 bits to store */
+
+	n = len;
+	while (n--) {
+		*buf++ = t;
+		if (!n--)
+			break;
+		*buf++ = t >> 8;
+		t = (unsigned char)*s++;
+	}
+	return len;
+}
+
+/**
+ * rh_string() - provides string descriptors for root hub
+ * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
+ * @hcd: the host controller for this root hub
+ * @data: buffer for output packet
+ * @len: length of the provided buffer
+ *
+ * Produces either a manufacturer, product or serial number string for the
+ * virtual root hub device.
+ *
+ * Return: The number of bytes filled in: the length of the descriptor or
+ * of the provided buffer, whichever is less.
+ */
+static unsigned
+rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
+{
+	char buf[100];
+	char const *s;
+	static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
+
+	/* language ids */
+	switch (id) {
+	case 0:
+		/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
+		/* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
+		if (len > 4)
+			len = 4;
+		memcpy(data, langids, len);
+		return len;
+	case 1:
+		/* Serial number */
+		s = hcd->self.bus_name;
+		break;
+	case 2:
+		/* Product name */
+		s = hcd->product_desc;
+		break;
+	case 3:
+		/* Manufacturer */
+		snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
+			init_utsname()->release, hcd->driver->description);
+		s = buf;
+		break;
+	default:
+		/* Can't happen; caller guarantees it */
+		return 0;
+	}
+
+	return ascii2desc(s, data, len);
+}
+
+
+/* Root hub control transfers execute synchronously */
+static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
+{
+	struct usb_ctrlrequest *cmd;
+	u16		typeReq, wValue, wIndex, wLength;
+	u8		*ubuf = urb->transfer_buffer;
+	unsigned	len = 0;
+	int		status;
+	u8		patch_wakeup = 0;
+	u8		patch_protocol = 0;
+	u16		tbuf_size;
+	u8		*tbuf = NULL;
+	const u8	*bufp;
+
+	might_sleep();
+
+	spin_lock_irq(&hcd_root_hub_lock);
+	status = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irq(&hcd_root_hub_lock);
+	if (status)
+		return status;
+	urb->hcpriv = hcd;	/* Indicate it's queued */
+
+	cmd = (struct usb_ctrlrequest *) urb->setup_packet;
+	typeReq  = (cmd->bRequestType << 8) | cmd->bRequest;
+	wValue   = le16_to_cpu (cmd->wValue);
+	wIndex   = le16_to_cpu (cmd->wIndex);
+	wLength  = le16_to_cpu (cmd->wLength);
+
+	if (wLength > urb->transfer_buffer_length)
+		goto error;
+
+	/*
+	 * tbuf should be at least as big as the
+	 * USB hub descriptor.
+	 */
+	tbuf_size =  max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
+	tbuf = kzalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	bufp = tbuf;
+
+
+	urb->actual_length = 0;
+	switch (typeReq) {
+
+	/* DEVICE REQUESTS */
+
+	/* The root hub's remote wakeup enable bit is implemented using
+	 * driver model wakeup flags.  If this system supports wakeup
+	 * through USB, userspace may change the default "allow wakeup"
+	 * policy through sysfs or these calls.
+	 *
+	 * Most root hubs support wakeup from downstream devices, for
+	 * runtime power management (disabling USB clocks and reducing
+	 * VBUS power usage).  However, not all of them do so; silicon,
+	 * board, and BIOS bugs here are not uncommon, so these can't
+	 * be treated quite like external hubs.
+	 *
+	 * Likewise, not all root hubs will pass wakeup events upstream,
+	 * to wake up the whole system.  So don't assume root hub and
+	 * controller capabilities are identical.
+	 */
+
+	case DeviceRequest | USB_REQ_GET_STATUS:
+		tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+					<< USB_DEVICE_REMOTE_WAKEUP)
+				| (1 << USB_DEVICE_SELF_POWERED);
+		tbuf[1] = 0;
+		len = 2;
+		break;
+	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+		if (wValue == USB_DEVICE_REMOTE_WAKEUP)
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
+		else
+			goto error;
+		break;
+	case DeviceOutRequest | USB_REQ_SET_FEATURE:
+		if (device_can_wakeup(&hcd->self.root_hub->dev)
+				&& wValue == USB_DEVICE_REMOTE_WAKEUP)
+			device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
+		else
+			goto error;
+		break;
+	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+		tbuf[0] = 1;
+		len = 1;
+			/* FALLTHROUGH */
+	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		switch (wValue & 0xff00) {
+		case USB_DT_DEVICE << 8:
+			switch (hcd->speed) {
+			case HCD_USB3:
+				bufp = usb3_rh_dev_descriptor;
+				break;
+			case HCD_USB25:
+				bufp = usb25_rh_dev_descriptor;
+				break;
+			case HCD_USB2:
+				bufp = usb2_rh_dev_descriptor;
+				break;
+			case HCD_USB11:
+				bufp = usb11_rh_dev_descriptor;
+				break;
+			default:
+				goto error;
+			}
+			len = 18;
+			if (hcd->has_tt)
+				patch_protocol = 1;
+			break;
+		case USB_DT_CONFIG << 8:
+			switch (hcd->speed) {
+			case HCD_USB3:
+				bufp = ss_rh_config_descriptor;
+				len = sizeof ss_rh_config_descriptor;
+				break;
+			case HCD_USB25:
+			case HCD_USB2:
+				bufp = hs_rh_config_descriptor;
+				len = sizeof hs_rh_config_descriptor;
+				break;
+			case HCD_USB11:
+				bufp = fs_rh_config_descriptor;
+				len = sizeof fs_rh_config_descriptor;
+				break;
+			default:
+				goto error;
+			}
+			if (device_can_wakeup(&hcd->self.root_hub->dev))
+				patch_wakeup = 1;
+			break;
+		case USB_DT_STRING << 8:
+			if ((wValue & 0xff) < 4)
+				urb->actual_length = rh_string(wValue & 0xff,
+						hcd, ubuf, wLength);
+			else /* unsupported IDs --> "protocol stall" */
+				goto error;
+			break;
+		case USB_DT_BOS << 8:
+			goto nongeneric;
+		default:
+			goto error;
+		}
+		break;
+	case DeviceRequest | USB_REQ_GET_INTERFACE:
+		tbuf[0] = 0;
+		len = 1;
+			/* FALLTHROUGH */
+	case DeviceOutRequest | USB_REQ_SET_INTERFACE:
+		break;
+	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+		/* wValue == urb->dev->devaddr */
+		dev_dbg (hcd->self.controller, "root hub device address %d\n",
+			wValue);
+		break;
+
+	/* INTERFACE REQUESTS (no defined feature/status flags) */
+
+	/* ENDPOINT REQUESTS */
+
+	case EndpointRequest | USB_REQ_GET_STATUS:
+		/* ENDPOINT_HALT flag */
+		tbuf[0] = 0;
+		tbuf[1] = 0;
+		len = 2;
+			/* FALLTHROUGH */
+	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+	case EndpointOutRequest | USB_REQ_SET_FEATURE:
+		dev_dbg (hcd->self.controller, "no endpoint features yet\n");
+		break;
+
+	/* CLASS REQUESTS (and errors) */
+
+	default:
+nongeneric:
+		/* non-generic request */
+		switch (typeReq) {
+		case GetHubStatus:
+		case GetPortStatus:
+			len = 4;
+			break;
+		case GetHubDescriptor:
+			len = sizeof (struct usb_hub_descriptor);
+			break;
+		case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+			/* len is returned by hub_control */
+			break;
+		}
+		status = hcd->driver->hub_control (hcd,
+			typeReq, wValue, wIndex,
+			tbuf, wLength);
+
+		if (typeReq == GetHubDescriptor)
+			usb_hub_adjust_deviceremovable(hcd->self.root_hub,
+				(struct usb_hub_descriptor *)tbuf);
+		break;
+error:
+		/* "protocol stall" on error */
+		status = -EPIPE;
+	}
+
+	if (status < 0) {
+		len = 0;
+		if (status != -EPIPE) {
+			dev_dbg (hcd->self.controller,
+				"CTRL: TypeReq=0x%x val=0x%x "
+				"idx=0x%x len=%d ==> %d\n",
+				typeReq, wValue, wIndex,
+				wLength, status);
+		}
+	} else if (status > 0) {
+		/* hub_control may return the length of data copied. */
+		len = status;
+		status = 0;
+	}
+	if (len) {
+		if (urb->transfer_buffer_length < len)
+			len = urb->transfer_buffer_length;
+		urb->actual_length = len;
+		/* always USB_DIR_IN, toward host */
+		memcpy (ubuf, bufp, len);
+
+		/* report whether RH hardware supports remote wakeup */
+		if (patch_wakeup &&
+				len > offsetof (struct usb_config_descriptor,
+						bmAttributes))
+			((struct usb_config_descriptor *)ubuf)->bmAttributes
+				|= USB_CONFIG_ATT_WAKEUP;
+
+		/* report whether RH hardware has an integrated TT */
+		if (patch_protocol &&
+				len > offsetof(struct usb_device_descriptor,
+						bDeviceProtocol))
+			((struct usb_device_descriptor *) ubuf)->
+				bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
+	}
+
+	kfree(tbuf);
+
+	/* any errors get returned through the urb completion */
+	spin_lock_irq(&hcd_root_hub_lock);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	usb_hcd_giveback_urb(hcd, urb, status);
+	spin_unlock_irq(&hcd_root_hub_lock);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Root Hub interrupt transfers are polled using a timer if the
+ * driver requests it; otherwise the driver is responsible for
+ * calling usb_hcd_poll_rh_status() when an event occurs.
+ *
+ * Completions are called in_interrupt(), but they may or may not
+ * be in_irq().
+ */
+void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
+{
+	struct urb	*urb;
+	int		length;
+	unsigned long	flags;
+	char		buffer[6];	/* Any root hubs with > 31 ports? */
+
+	if (unlikely(!hcd->rh_pollable))
+		return;
+	if (!hcd->uses_new_polling && !hcd->status_urb)
+		return;
+
+	length = hcd->driver->hub_status_data(hcd, buffer);
+	if (length > 0) {
+
+		/* try to complete the status urb */
+		spin_lock_irqsave(&hcd_root_hub_lock, flags);
+		urb = hcd->status_urb;
+		if (urb) {
+			clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
+			hcd->status_urb = NULL;
+			urb->actual_length = length;
+			memcpy(urb->transfer_buffer, buffer, length);
+
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			usb_hcd_giveback_urb(hcd, urb, 0);
+		} else {
+			length = 0;
+			set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
+		}
+		spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+	}
+
+	/* The USB 2.0 spec says 256 ms.  This is close enough and won't
+	 * exceed that limit if HZ is 100. The math is more clunky than
+	 * maybe expected, this is to make sure that all timers for USB devices
+	 * fire at the same time to give the CPU a break in between */
+	if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
+			(length == 0 && hcd->status_urb != NULL))
+		mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+}
+EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
+
+/* timer callback */
+static void rh_timer_func (unsigned long _hcd)
+{
+	usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
+{
+	int		retval;
+	unsigned long	flags;
+	unsigned	len = 1 + (urb->dev->maxchild / 8);
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	if (hcd->status_urb || urb->transfer_buffer_length < len) {
+		dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
+		retval = -EINVAL;
+		goto done;
+	}
+
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto done;
+
+	hcd->status_urb = urb;
+	urb->hcpriv = hcd;	/* indicate it's queued */
+	if (!hcd->uses_new_polling)
+		mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+	/* If a status change has already occurred, report it ASAP */
+	else if (HCD_POLL_PENDING(hcd))
+		mod_timer(&hcd->rh_timer, jiffies);
+	retval = 0;
+ done:
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+	return retval;
+}
+
+static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
+{
+	if (usb_endpoint_xfer_int(&urb->ep->desc))
+		return rh_queue_status (hcd, urb);
+	if (usb_endpoint_xfer_control(&urb->ep->desc))
+		return rh_call_control (hcd, urb);
+	return -EINVAL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Unlinks of root-hub control URBs are legal, but they don't do anything
+ * since these URBs always execute synchronously.
+ */
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	unsigned long	flags;
+	int		rc;
+
+	spin_lock_irqsave(&hcd_root_hub_lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	if (usb_endpoint_num(&urb->ep->desc) == 0) {	/* Control URB */
+		;	/* Do nothing */
+
+	} else {				/* Status URB */
+		if (!hcd->uses_new_polling)
+			del_timer (&hcd->rh_timer);
+		if (urb == hcd->status_urb) {
+			hcd->status_urb = NULL;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			usb_hcd_giveback_urb(hcd, urb, status);
+		}
+	}
+ done:
+	spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+	return rc;
+}
+
+
+
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t authorized_default_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *rh_usb_dev = to_usb_device(dev);
+	struct usb_bus *usb_bus = rh_usb_dev->bus;
+	struct usb_hcd *usb_hcd;
+
+	usb_hcd = bus_to_hcd(usb_bus);
+	return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+}
+
+static ssize_t authorized_default_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t size)
+{
+	ssize_t result;
+	unsigned val;
+	struct usb_device *rh_usb_dev = to_usb_device(dev);
+	struct usb_bus *usb_bus = rh_usb_dev->bus;
+	struct usb_hcd *usb_hcd;
+
+	usb_hcd = bus_to_hcd(usb_bus);
+	result = sscanf(buf, "%u\n", &val);
+	if (result == 1) {
+		usb_hcd->authorized_default = val ? 1 : 0;
+		result = size;
+	} else {
+		result = -EINVAL;
+	}
+	return result;
+}
+static DEVICE_ATTR_RW(authorized_default);
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+		&dev_attr_authorized_default.attr,
+		NULL,
+};
+
+static struct attribute_group usb_bus_attr_group = {
+	.name = NULL,	/* we want them in the same directory */
+	.attrs = usb_bus_attrs,
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_bus_init - shared initialization code
+ * @bus: the bus structure being initialized
+ *
+ * This code is used to initialize a usb_bus structure, memory for which is
+ * separately managed.
+ */
+static void usb_bus_init (struct usb_bus *bus)
+{
+	memset (&bus->devmap, 0, sizeof(struct usb_devmap));
+
+	bus->devnum_next = 1;
+
+	bus->root_hub = NULL;
+	bus->busnum = -1;
+	bus->bandwidth_allocated = 0;
+	bus->bandwidth_int_reqs  = 0;
+	bus->bandwidth_isoc_reqs = 0;
+	mutex_init(&bus->usb_address0_mutex);
+
+	INIT_LIST_HEAD (&bus->bus_list);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_register_bus - registers the USB host controller with the usb core
+ * @bus: pointer to the bus to register
+ * Context: !in_interrupt()
+ *
+ * Assigns a bus number, and links the controller into usbcore data
+ * structures so that it can be seen by scanning the bus list.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_register_bus(struct usb_bus *bus)
+{
+	int result = -E2BIG;
+	int busnum;
+
+	mutex_lock(&usb_bus_list_lock);
+	busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1);
+	if (busnum >= USB_MAXBUS) {
+		printk (KERN_ERR "%s: too many buses\n", usbcore_name);
+		goto error_find_busnum;
+	}
+	set_bit(busnum, busmap);
+	bus->busnum = busnum;
+
+	/* Add it to the local list of buses */
+	list_add (&bus->bus_list, &usb_bus_list);
+	mutex_unlock(&usb_bus_list_lock);
+
+	usb_notify_add_bus(bus);
+
+	dev_info (bus->controller, "new USB bus registered, assigned bus "
+		  "number %d\n", bus->busnum);
+	return 0;
+
+error_find_busnum:
+	mutex_unlock(&usb_bus_list_lock);
+	return result;
+}
+
+/**
+ * usb_deregister_bus - deregisters the USB host controller
+ * @bus: pointer to the bus to deregister
+ * Context: !in_interrupt()
+ *
+ * Recycles the bus number, and unlinks the controller from usbcore data
+ * structures so that it won't be seen by scanning the bus list.
+ */
+static void usb_deregister_bus (struct usb_bus *bus)
+{
+	dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
+
+	/*
+	 * NOTE: make sure that all the devices are removed by the
+	 * controller code, as well as having it call this when cleaning
+	 * itself up
+	 */
+	mutex_lock(&usb_bus_list_lock);
+	list_del (&bus->bus_list);
+	mutex_unlock(&usb_bus_list_lock);
+
+	usb_notify_remove_bus(bus);
+
+	clear_bit(bus->busnum, busmap);
+}
+
+/**
+ * register_root_hub - called by usb_add_hcd() to register a root hub
+ * @hcd: host controller for this root hub
+ *
+ * This function registers the root hub with the USB subsystem.  It sets up
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device.  It also assigns the root hub's USB address
+ * (always 1).
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int register_root_hub(struct usb_hcd *hcd)
+{
+	struct device *parent_dev = hcd->self.controller;
+	struct usb_device *usb_dev = hcd->self.root_hub;
+	const int devnum = 1;
+	int retval;
+
+	usb_dev->devnum = devnum;
+	usb_dev->bus->devnum_next = devnum + 1;
+	memset (&usb_dev->bus->devmap.devicemap, 0,
+			sizeof usb_dev->bus->devmap.devicemap);
+	set_bit (devnum, usb_dev->bus->devmap.devicemap);
+	usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
+
+	mutex_lock(&usb_bus_list_lock);
+
+	usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+	retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
+	if (retval != sizeof usb_dev->descriptor) {
+		mutex_unlock(&usb_bus_list_lock);
+		dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
+				dev_name(&usb_dev->dev), retval);
+		return (retval < 0) ? retval : -EMSGSIZE;
+	}
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(usb_dev);
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed == USB_SPEED_SUPER) {
+			mutex_unlock(&usb_bus_list_lock);
+			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
+					dev_name(&usb_dev->dev), retval);
+			return retval;
+		}
+	}
+
+	retval = usb_new_device (usb_dev);
+	if (retval) {
+		dev_err (parent_dev, "can't register root hub for %s, %d\n",
+				dev_name(&usb_dev->dev), retval);
+	} else {
+		spin_lock_irq (&hcd_root_hub_lock);
+		hcd->rh_registered = 1;
+		spin_unlock_irq (&hcd_root_hub_lock);
+
+		/* Did the HC die before the root hub was registered? */
+		if (HCD_DEAD(hcd))
+			usb_hc_died (hcd);	/* This time clean up */
+	}
+	mutex_unlock(&usb_bus_list_lock);
+
+	return retval;
+}
+
+/*
+ * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal is
+ * being sent to a root-hub port.  The root hub will be prevented from
+ * going into autosuspend until usb_hcd_end_port_resume() is called.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (!(bus->resuming_ports & bit)) {
+		bus->resuming_ports |= bit;
+		pm_runtime_get_noresume(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
+
+/*
+ * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal has
+ * stopped being sent to a root-hub port.  The root hub will be allowed to
+ * autosuspend again.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
+{
+	unsigned bit = 1 << portnum;
+
+	if (bus->resuming_ports & bit) {
+		bus->resuming_ports &= ~bit;
+		pm_runtime_put_noidle(&bus->root_hub->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
+ * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
+ * @is_input: true iff the transaction sends data to the host
+ * @isoc: true for isochronous transactions, false for interrupt ones
+ * @bytecount: how many bytes in the transaction.
+ *
+ * Return: Approximate bus time in nanoseconds for a periodic transaction.
+ *
+ * Note:
+ * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
+ * scheduled in software, this function is only used for such scheduling.
+ */
+long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
+{
+	unsigned long	tmp;
+
+	switch (speed) {
+	case USB_SPEED_LOW: 	/* INTR only */
+		if (is_input) {
+			tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+		} else {
+			tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
+		}
+	case USB_SPEED_FULL:	/* ISOC or INTR */
+		if (isoc) {
+			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
+		} else {
+			tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
+			return 9107L + BW_HOST_DELAY + tmp;
+		}
+	case USB_SPEED_HIGH:	/* ISOC or INTR */
+		/* FIXME adjust for input vs output */
+		if (isoc)
+			tmp = HS_NSECS_ISO (bytecount);
+		else
+			tmp = HS_NSECS (bytecount);
+		return tmp;
+	default:
+		pr_debug ("%s: bogus device speed!\n", usbcore_name);
+		return -1;
+	}
+}
+EXPORT_SYMBOL_GPL(usb_calc_bus_time);
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Generic HC operations.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
+ *
+ * Host controller drivers should call this routine in their enqueue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
+ *
+ * Return: 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail).  If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
+ */
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+	int		rc = 0;
+
+	spin_lock(&hcd_urb_list_lock);
+
+	/* Check that the URB isn't being killed */
+	if (unlikely(atomic_read(&urb->reject))) {
+		rc = -EPERM;
+		goto done;
+	}
+
+	if (unlikely(!urb->ep->enabled)) {
+		rc = -ENOENT;
+		goto done;
+	}
+
+	if (unlikely(!urb->dev->can_submit)) {
+		rc = -EHOSTUNREACH;
+		goto done;
+	}
+
+	/*
+	 * Check the host controller's state and add the URB to the
+	 * endpoint's queue.
+	 */
+	if (HCD_RH_RUNNING(hcd)) {
+		urb->unlinked = 0;
+		list_add_tail(&urb->urb_list, &urb->ep->urb_list);
+	} else {
+		rc = -ESHUTDOWN;
+		goto done;
+	}
+ done:
+	spin_unlock(&hcd_urb_list_lock);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
+
+/**
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method.  The HCD's private spinlock must be held and interrupts must
+ * be disabled.  The actions carried out here are required for making
+ * sure than an unlink is valid.
+ *
+ * Return: 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail).  The possible error codes are:
+ *
+ *	-EIDRM: @urb was not submitted or has already completed.
+ *		The completion function may not have been called yet.
+ *
+ *	-EBUSY: @urb has already been unlinked.
+ */
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status)
+{
+	struct list_head	*tmp;
+
+	/* insist the urb is still queued */
+	list_for_each(tmp, &urb->ep->urb_list) {
+		if (tmp == &urb->urb_list)
+			break;
+	}
+	if (tmp != &urb->urb_list)
+		return -EIDRM;
+
+	/* Any status except -EINPROGRESS means something already started to
+	 * unlink this URB from the hardware.  So there's no more work to do.
+	 */
+	if (urb->unlinked)
+		return -EBUSY;
+	urb->unlinked = status;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
+
+/**
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
+ *
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb().  The HCD's private spinlock must be held and
+ * interrupts must be disabled.  The actions carried out here are required
+ * for URB completion.
+ */
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+	/* clear all state linking urb to this dev (and hcd) */
+	spin_lock(&hcd_urb_list_lock);
+	list_del_init(&urb->urb_list);
+	spin_unlock(&hcd_urb_list_lock);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
+
+/*
+ * Some usb host controllers can only perform dma using a small SRAM area.
+ * The usb core itself is however optimized for host controllers that can dma
+ * using regular system memory - like pci devices doing bus mastering.
+ *
+ * To support host controllers with limited dma capabilities we provide dma
+ * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
+ * For this to work properly the host controller code must first use the
+ * function dma_declare_coherent_memory() to point out which memory area
+ * that should be used for dma allocations.
+ *
+ * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
+ * dma using dma_alloc_coherent() which in turn allocates from the memory
+ * area pointed out with dma_declare_coherent_memory().
+ *
+ * So, to summarize...
+ *
+ * - We need "local" memory, canonical example being
+ *   a small SRAM on a discrete controller being the
+ *   only memory that the controller can read ...
+ *   (a) "normal" kernel memory is no good, and
+ *   (b) there's not enough to share
+ *
+ * - The only *portable* hook for such stuff in the
+ *   DMA framework is dma_declare_coherent_memory()
+ *
+ * - So we use that, even though the primary requirement
+ *   is that the memory be "local" (hence addressable
+ *   by that device), not "coherent".
+ *
+ */
+
+static int hcd_alloc_coherent(struct usb_bus *bus,
+			      gfp_t mem_flags, dma_addr_t *dma_handle,
+			      void **vaddr_handle, size_t size,
+			      enum dma_data_direction dir)
+{
+	unsigned char *vaddr;
+
+	if (*vaddr_handle == NULL) {
+		WARN_ON_ONCE(1);
+		return -EFAULT;
+	}
+
+	vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
+				 mem_flags, dma_handle);
+	if (!vaddr)
+		return -ENOMEM;
+
+	/*
+	 * Store the virtual address of the buffer at the end
+	 * of the allocated dma buffer. The size of the buffer
+	 * may be uneven so use unaligned functions instead
+	 * of just rounding up. It makes sense to optimize for
+	 * memory footprint over access speed since the amount
+	 * of memory available for dma may be limited.
+	 */
+	put_unaligned((unsigned long)*vaddr_handle,
+		      (unsigned long *)(vaddr + size));
+
+	if (dir == DMA_TO_DEVICE)
+		memcpy(vaddr, *vaddr_handle, size);
+
+	*vaddr_handle = vaddr;
+	return 0;
+}
+
+static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
+			      void **vaddr_handle, size_t size,
+			      enum dma_data_direction dir)
+{
+	unsigned char *vaddr = *vaddr_handle;
+
+	vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
+
+	if (dir == DMA_FROM_DEVICE)
+		memcpy(vaddr, *vaddr_handle, size);
+
+	hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
+
+	*vaddr_handle = vaddr;
+	*dma_handle = 0;
+}
+
+void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
+		dma_unmap_single(hcd->self.controller,
+				urb->setup_dma,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+	else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->setup_dma,
+				(void **) &urb->setup_packet,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+
+	/* Make it safe to call this routine more than once */
+	urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
+
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	if (hcd->driver->unmap_urb_for_dma)
+		hcd->driver->unmap_urb_for_dma(hcd, urb);
+	else
+		usb_hcd_unmap_urb_for_dma(hcd, urb);
+}
+
+void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	enum dma_data_direction dir;
+
+	usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	if (urb->transfer_flags & URB_DMA_MAP_SG)
+		dma_unmap_sg(hcd->self.controller,
+				urb->sg,
+				urb->num_sgs,
+				dir);
+	else if (urb->transfer_flags & URB_DMA_MAP_PAGE)
+		dma_unmap_page(hcd->self.controller,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (urb->transfer_flags & URB_DMA_MAP_SINGLE)
+		dma_unmap_single(hcd->self.controller,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (urb->transfer_flags & URB_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->transfer_dma,
+				&urb->transfer_buffer,
+				urb->transfer_buffer_length,
+				dir);
+
+	/* Make it safe to call this routine more than once */
+	urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
+			URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
+
+static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+			   gfp_t mem_flags)
+{
+	if (hcd->driver->map_urb_for_dma)
+		return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
+	else
+		return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	int ret = 0;
+
+	/* Map the URB's buffers for DMA access.
+	 * Lower level HCD code should use *_dma exclusively,
+	 * unless it uses pio or talks to another transport,
+	 * or uses the provided scatter gather list for bulk.
+	 */
+
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
+		if (hcd->self.uses_dma) {
+			urb->setup_dma = dma_map_single(
+					hcd->self.controller,
+					urb->setup_packet,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+			if (dma_mapping_error(hcd->self.controller,
+						urb->setup_dma))
+				return -EAGAIN;
+			urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
+		} else if (hcd->driver->flags & HCD_LOCAL_MEM) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->setup_dma,
+					(void **)&urb->setup_packet,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+			urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+		}
+	}
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	if (urb->transfer_buffer_length != 0
+	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+		if (hcd->self.uses_dma) {
+			if (urb->num_sgs) {
+				int n;
+
+				/* We don't support sg for isoc transfers ! */
+				if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+					WARN_ON(1);
+					return -EINVAL;
+				}
+
+				n = dma_map_sg(
+						hcd->self.controller,
+						urb->sg,
+						urb->num_sgs,
+						dir);
+				if (n <= 0)
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SG;
+				urb->num_mapped_sgs = n;
+				if (n != urb->num_sgs)
+					urb->transfer_flags |=
+							URB_DMA_SG_COMBINED;
+			} else if (urb->sg) {
+				struct scatterlist *sg = urb->sg;
+				urb->transfer_dma = dma_map_page(
+						hcd->self.controller,
+						sg_page(sg),
+						sg->offset,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.controller,
+						urb->transfer_dma))
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_PAGE;
+			} else if (is_vmalloc_addr(urb->transfer_buffer)) {
+				WARN_ONCE(1, "transfer buffer not dma capable\n");
+				ret = -EAGAIN;
+			} else {
+				urb->transfer_dma = dma_map_single(
+						hcd->self.controller,
+						urb->transfer_buffer,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.controller,
+						urb->transfer_dma))
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SINGLE;
+			}
+		} else if (hcd->driver->flags & HCD_LOCAL_MEM) {
+			ret = hcd_alloc_coherent(
+					urb->dev->bus, mem_flags,
+					&urb->transfer_dma,
+					&urb->transfer_buffer,
+					urb->transfer_buffer_length,
+					dir);
+			if (ret == 0)
+				urb->transfer_flags |= URB_MAP_LOCAL;
+		}
+		if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
+				URB_SETUP_MAP_LOCAL)))
+			usb_hcd_unmap_urb_for_dma(hcd, urb);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
+
+/*-------------------------------------------------------------------------*/
+
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+{
+	int			status;
+	struct usb_hcd		*hcd = bus_to_hcd(urb->dev->bus);
+
+	/* increment urb's reference count as part of giving it to the HCD
+	 * (which will control it).  HCD guarantees that it either returns
+	 * an error or calls giveback(), but not both.
+	 */
+	usb_get_urb(urb);
+	atomic_inc(&urb->use_count);
+	atomic_inc(&urb->dev->urbnum);
+	usbmon_urb_submit(&hcd->self, urb);
+
+	/* NOTE requirements on root-hub callers (usbfs and the hub
+	 * driver, for now):  URBs' urb->transfer_buffer must be
+	 * valid and usb_buffer_{sync,unmap}() not be needed, since
+	 * they could clobber root hub response data.  Also, control
+	 * URBs must be submitted in process context with interrupts
+	 * enabled.
+	 */
+
+	if (is_root_hub(urb->dev)) {
+		status = rh_urb_enqueue(hcd, urb);
+	} else {
+		status = map_urb_for_dma(hcd, urb, mem_flags);
+		if (likely(status == 0)) {
+			status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+			if (unlikely(status))
+				unmap_urb_for_dma(hcd, urb);
+		}
+	}
+
+	if (unlikely(status)) {
+		usbmon_urb_submit_error(&hcd->self, urb, status);
+		urb->hcpriv = NULL;
+		INIT_LIST_HEAD(&urb->urb_list);
+		atomic_dec(&urb->use_count);
+		atomic_dec(&urb->dev->urbnum);
+		if (atomic_read(&urb->reject))
+			wake_up(&usb_kill_urb_queue);
+		usb_put_urb(urb);
+	}
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* this makes the hcd giveback() the urb more quickly, by kicking it
+ * off hardware queues (which may take a while) and returning it as
+ * soon as practical.  we've already set up the urb's return status,
+ * but we can't know if the callback completed already.
+ */
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	int		value;
+
+	if (is_root_hub(urb->dev))
+		value = usb_rh_urb_dequeue(hcd, urb, status);
+	else {
+
+		/* The only reason an HCD might fail this call is if
+		 * it has not yet fully queued the urb to begin with.
+		 * Such failures should be harmless. */
+		value = hcd->driver->urb_dequeue(hcd, urb, status);
+	}
+	return value;
+}
+
+/*
+ * called in any context
+ *
+ * caller guarantees urb won't be recycled till both unlink()
+ * and the urb's completion function return
+ */
+int usb_hcd_unlink_urb (struct urb *urb, int status)
+{
+	struct usb_hcd		*hcd;
+	struct usb_device	*udev = urb->dev;
+	int			retval = -EIDRM;
+	unsigned long		flags;
+
+	/* Prevent the device and bus from going away while
+	 * the unlink is carried out.  If they are already gone
+	 * then urb->use_count must be 0, since disconnected
+	 * devices can't have any active URBs.
+	 */
+	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
+	if (atomic_read(&urb->use_count) > 0) {
+		retval = 0;
+		usb_get_dev(udev);
+	}
+	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
+	if (retval == 0) {
+		hcd = bus_to_hcd(urb->dev->bus);
+		retval = unlink1(hcd, urb, status);
+		if (retval == 0)
+			retval = -EINPROGRESS;
+		else if (retval != -EIDRM && retval != -EBUSY)
+			dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+					urb, retval);
+		usb_put_dev(udev);
+	}
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void __usb_hcd_giveback_urb(struct urb *urb)
+{
+	struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+	struct usb_anchor *anchor = urb->anchor;
+	int status = urb->unlinked;
+	unsigned long flags;
+
+	urb->hcpriv = NULL;
+	if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+	    urb->actual_length < urb->transfer_buffer_length &&
+	    !status))
+		status = -EREMOTEIO;
+
+	unmap_urb_for_dma(hcd, urb);
+	usbmon_urb_complete(&hcd->self, urb, status);
+	usb_anchor_suspend_wakeups(anchor);
+	usb_unanchor_urb(urb);
+	if (likely(status == 0))
+		usb_led_activity(USB_LED_EVENT_HOST);
+
+	/* pass ownership to the completion handler */
+	urb->status = status;
+
+	/*
+	 * We disable local IRQs here avoid possible deadlock because
+	 * drivers may call spin_lock() to hold lock which might be
+	 * acquired in one hard interrupt handler.
+	 *
+	 * The local_irq_save()/local_irq_restore() around complete()
+	 * will be removed if current USB drivers have been cleaned up
+	 * and no one may trigger the above deadlock situation when
+	 * running complete() in tasklet.
+	 */
+	local_irq_save(flags);
+	urb->complete(urb);
+	local_irq_restore(flags);
+
+	usb_anchor_resume_wakeups(anchor);
+	atomic_dec(&urb->use_count);
+	if (unlikely(atomic_read(&urb->reject)))
+		wake_up(&usb_kill_urb_queue);
+	usb_put_urb(urb);
+}
+
+static void usb_giveback_urb_bh(unsigned long param)
+{
+	struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
+	struct list_head local_list;
+
+	spin_lock_irq(&bh->lock);
+	bh->running = true;
+ restart:
+	list_replace_init(&bh->head, &local_list);
+	spin_unlock_irq(&bh->lock);
+
+	while (!list_empty(&local_list)) {
+		struct urb *urb;
+
+		urb = list_entry(local_list.next, struct urb, urb_list);
+		list_del_init(&urb->urb_list);
+		bh->completing_ep = urb->ep;
+		__usb_hcd_giveback_urb(urb);
+		bh->completing_ep = NULL;
+	}
+
+	/* check if there are new URBs to giveback */
+	spin_lock_irq(&bh->lock);
+	if (!list_empty(&bh->head))
+		goto restart;
+	bh->running = false;
+	spin_unlock_irq(&bh->lock);
+}
+
+/**
+ * usb_hcd_giveback_urb - return URB from HCD to device driver
+ * @hcd: host controller returning the URB
+ * @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
+ * Context: in_interrupt()
+ *
+ * This hands the URB from HCD to its USB device driver, using its
+ * completion function.  The HCD has freed all per-urb resources
+ * (and is done using urb->hcpriv).  It also released all HCD locks;
+ * the device driver won't cause problems if it frees, modifies,
+ * or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked.  Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
+ */
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct giveback_urb_bh *bh;
+	bool running, high_prio_bh;
+
+	/* pass status to tasklet via unlinked */
+	if (likely(!urb->unlinked))
+		urb->unlinked = status;
+
+	if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
+		__usb_hcd_giveback_urb(urb);
+		return;
+	}
+
+	if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
+		bh = &hcd->high_prio_bh;
+		high_prio_bh = true;
+	} else {
+		bh = &hcd->low_prio_bh;
+		high_prio_bh = false;
+	}
+
+	spin_lock(&bh->lock);
+	list_add_tail(&urb->urb_list, &bh->head);
+	running = bh->running;
+	spin_unlock(&bh->lock);
+
+	if (running)
+		;
+	else if (high_prio_bh)
+		tasklet_hi_schedule(&bh->bh);
+	else
+		tasklet_schedule(&bh->bh);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
+
+/*-------------------------------------------------------------------------*/
+
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely.  The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
+ */
+void usb_hcd_flush_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct usb_hcd		*hcd;
+	struct urb		*urb;
+
+	if (!ep)
+		return;
+	might_sleep();
+	hcd = bus_to_hcd(udev->bus);
+
+	/* No more submits can occur */
+	spin_lock_irq(&hcd_urb_list_lock);
+rescan:
+	list_for_each_entry (urb, &ep->urb_list, urb_list) {
+		int	is_in;
+
+		if (urb->unlinked)
+			continue;
+		usb_get_urb (urb);
+		is_in = usb_urb_dir_in(urb);
+		spin_unlock(&hcd_urb_list_lock);
+
+		/* kick hcd */
+		unlink1(hcd, urb, -ESHUTDOWN);
+		dev_dbg (hcd->self.controller,
+			"shutdown urb %p ep%d%s%s\n",
+			urb, usb_endpoint_num(&ep->desc),
+			is_in ? "in" : "out",
+			({	char *s;
+
+				 switch (usb_endpoint_type(&ep->desc)) {
+				 case USB_ENDPOINT_XFER_CONTROL:
+					s = ""; break;
+				 case USB_ENDPOINT_XFER_BULK:
+					s = "-bulk"; break;
+				 case USB_ENDPOINT_XFER_INT:
+					s = "-intr"; break;
+				 default:
+					s = "-iso"; break;
+				};
+				s;
+			}));
+		usb_put_urb (urb);
+
+		/* list contents may have changed */
+		spin_lock(&hcd_urb_list_lock);
+		goto rescan;
+	}
+	spin_unlock_irq(&hcd_urb_list_lock);
+
+	/* Wait until the endpoint queue is completely empty */
+	while (!list_empty (&ep->urb_list)) {
+		spin_lock_irq(&hcd_urb_list_lock);
+
+		/* The list may have changed while we acquired the spinlock */
+		urb = NULL;
+		if (!list_empty (&ep->urb_list)) {
+			urb = list_entry (ep->urb_list.prev, struct urb,
+					urb_list);
+			usb_get_urb (urb);
+		}
+		spin_unlock_irq(&hcd_urb_list_lock);
+
+		if (urb) {
+			usb_kill_urb (urb);
+			usb_put_urb (urb);
+		}
+	}
+}
+
+/**
+ * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
+ *				the bus bandwidth
+ * @udev: target &usb_device
+ * @new_config: new configuration to install
+ * @cur_alt: the current alternate interface setting
+ * @new_alt: alternate interface setting that is being installed
+ *
+ * To change configurations, pass in the new configuration in new_config,
+ * and pass NULL for cur_alt and new_alt.
+ *
+ * To reset a device's configuration (put the device in the ADDRESSED state),
+ * pass in NULL for new_config, cur_alt, and new_alt.
+ *
+ * To change alternate interface settings, pass in NULL for new_config,
+ * pass in the current alternate interface setting in cur_alt,
+ * and pass in the new alternate interface setting in new_alt.
+ *
+ * Return: An error if the requested bandwidth change exceeds the
+ * bus bandwidth or host controller internal resources.
+ */
+int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_host_interface *cur_alt,
+		struct usb_host_interface *new_alt)
+{
+	int num_intfs, i, j;
+	struct usb_host_interface *alt = NULL;
+	int ret = 0;
+	struct usb_hcd *hcd;
+	struct usb_host_endpoint *ep;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd->driver->check_bandwidth)
+		return 0;
+
+	/* Configuration is being removed - set configuration 0 */
+	if (!new_config && !cur_alt) {
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+			ep = udev->ep_in[i];
+			if (ep)
+				hcd->driver->drop_endpoint(hcd, udev, ep);
+		}
+		hcd->driver->check_bandwidth(hcd, udev);
+		return 0;
+	}
+	/* Check if the HCD says there's enough bandwidth.  Enable all endpoints
+	 * each interface's alt setting 0 and ask the HCD to check the bandwidth
+	 * of the bus.  There will always be bandwidth for endpoint 0, so it's
+	 * ok to exclude it.
+	 */
+	if (new_config) {
+		num_intfs = new_config->desc.bNumInterfaces;
+		/* Remove endpoints (except endpoint 0, which is always on the
+		 * schedule) from the old config from the schedule
+		 */
+		for (i = 1; i < 16; ++i) {
+			ep = udev->ep_out[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+			ep = udev->ep_in[i];
+			if (ep) {
+				ret = hcd->driver->drop_endpoint(hcd, udev, ep);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+		for (i = 0; i < num_intfs; ++i) {
+			struct usb_host_interface *first_alt;
+			int iface_num;
+
+			first_alt = &new_config->intf_cache[i]->altsetting[0];
+			iface_num = first_alt->desc.bInterfaceNumber;
+			/* Set up endpoints for alternate interface setting 0 */
+			alt = usb_find_alt_setting(new_config, iface_num, 0);
+			if (!alt)
+				/* No alt setting 0? Pick the first setting. */
+				alt = first_alt;
+
+			for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+				ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
+				if (ret < 0)
+					goto reset;
+			}
+		}
+	}
+	if (cur_alt && new_alt) {
+		struct usb_interface *iface = usb_ifnum_to_if(udev,
+				cur_alt->desc.bInterfaceNumber);
+
+		if (!iface)
+			return -EINVAL;
+		if (iface->resetting_device) {
+			/*
+			 * The USB core just reset the device, so the xHCI host
+			 * and the device will think alt setting 0 is installed.
+			 * However, the USB core will pass in the alternate
+			 * setting installed before the reset as cur_alt.  Dig
+			 * out the alternate setting 0 structure, or the first
+			 * alternate setting if a broken device doesn't have alt
+			 * setting 0.
+			 */
+			cur_alt = usb_altnum_to_altsetting(iface, 0);
+			if (!cur_alt)
+				cur_alt = &iface->altsetting[0];
+		}
+
+		/* Drop all the endpoints in the current alt setting */
+		for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
+			ret = hcd->driver->drop_endpoint(hcd, udev,
+					&cur_alt->endpoint[i]);
+			if (ret < 0)
+				goto reset;
+		}
+		/* Add all the endpoints in the new alt setting */
+		for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
+			ret = hcd->driver->add_endpoint(hcd, udev,
+					&new_alt->endpoint[i]);
+			if (ret < 0)
+				goto reset;
+		}
+	}
+	ret = hcd->driver->check_bandwidth(hcd, udev);
+reset:
+	if (ret < 0)
+		hcd->driver->reset_bandwidth(hcd, udev);
+	return ret;
+}
+
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
+ * have been called previously.  Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example:  a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct usb_hcd		*hcd;
+
+	might_sleep();
+	hcd = bus_to_hcd(udev->bus);
+	if (hcd->driver->endpoint_disable)
+		hcd->driver->endpoint_disable(hcd, ep);
+}
+
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep:   the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+			    struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (hcd->driver->endpoint_reset)
+		hcd->driver->endpoint_reset(hcd, ep);
+	else {
+		int epnum = usb_endpoint_num(&ep->desc);
+		int is_out = usb_endpoint_dir_out(&ep->desc);
+		int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+		usb_settoggle(udev, epnum, is_out, 0);
+		if (is_control)
+			usb_settoggle(udev, epnum, !is_out, 0);
+	}
+}
+
+/**
+ * usb_alloc_streams - allocate bulk endpoint stream IDs.
+ * @interface:		alternate setting that includes all endpoints.
+ * @eps:		array of endpoints that need streams.
+ * @num_eps:		number of endpoints in the array.
+ * @num_streams:	number of streams to allocate.
+ * @mem_flags:		flags hcd should use to allocate memory.
+ *
+ * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
+ * Drivers may queue multiple transfers to different stream IDs, which may
+ * complete in a different order than they were queued.
+ *
+ * Return: On success, the number of allocated streams. On failure, a negative
+ * error code.
+ */
+int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i, ret;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
+		return -EINVAL;
+	if (dev->speed != USB_SPEED_SUPER)
+		return -EINVAL;
+	if (dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
+
+	for (i = 0; i < num_eps; i++) {
+		/* Streams only apply to bulk endpoints. */
+		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+			return -EINVAL;
+		/* Re-alloc is not allowed */
+		if (eps[i]->streams)
+			return -EINVAL;
+	}
+
+	ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
+			num_streams, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = ret;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_streams);
+
+/**
+ * usb_free_streams - free bulk endpoint stream IDs.
+ * @interface:	alternate setting that includes all endpoints.
+ * @eps:	array of endpoints to remove streams from.
+ * @num_eps:	number of endpoints in the array.
+ * @mem_flags:	flags hcd should use to allocate memory.
+ *
+ * Reverts a group of bulk endpoints back to not using stream IDs.
+ * Can fail if we are given bad arguments, or HCD is broken.
+ *
+ * Return: 0 on success. On failure, a negative error code.
+ */
+int usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i, ret;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (dev->speed != USB_SPEED_SUPER)
+		return -EINVAL;
+
+	/* Double-free is not allowed */
+	for (i = 0; i < num_eps; i++)
+		if (!eps[i] || !eps[i]->streams)
+			return -EINVAL;
+
+	ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_eps; i++)
+		eps[i]->streams = 0;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_free_streams);
+
+/* Protect against drivers that try to unlink URBs after the device
+ * is gone, by waiting until all unlinks for @udev are finished.
+ * Since we don't currently track URBs by device, simply wait until
+ * nothing is running in the locked region of usb_hcd_unlink_urb().
+ */
+void usb_hcd_synchronize_unlinks(struct usb_device *udev)
+{
+	spin_lock_irq(&hcd_urb_unlink_lock);
+	spin_unlock_irq(&hcd_urb_unlink_lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* called in any context */
+int usb_hcd_get_frame_number (struct usb_device *udev)
+{
+	struct usb_hcd	*hcd = bus_to_hcd(udev->bus);
+
+	if (!HCD_RH_RUNNING(hcd))
+		return -ESHUTDOWN;
+	return hcd->driver->get_frame_number (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
+{
+	struct usb_hcd	*hcd = container_of(rhdev->bus, struct usb_hcd, self);
+	int		status;
+	int		old_state = hcd->state;
+
+	dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
+			(PMSG_IS_AUTO(msg) ? "auto-" : ""),
+			rhdev->do_remote_wakeup);
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
+		return 0;
+	}
+
+	if (!hcd->driver->bus_suspend) {
+		status = -ENOENT;
+	} else {
+		clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+		hcd->state = HC_STATE_QUIESCING;
+		status = hcd->driver->bus_suspend(hcd);
+	}
+	if (status == 0) {
+		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
+		hcd->state = HC_STATE_SUSPENDED;
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
+	} else {
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = old_state;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
+		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+				"suspend", status);
+	}
+	return status;
+}
+
+int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
+{
+	struct usb_hcd	*hcd = container_of(rhdev->bus, struct usb_hcd, self);
+	int		status;
+	int		old_state = hcd->state;
+
+	dev_dbg(&rhdev->dev, "usb %sresume\n",
+			(PMSG_IS_AUTO(msg) ? "auto-" : ""));
+	if (HCD_DEAD(hcd)) {
+		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
+		return 0;
+	}
+	if (!hcd->driver->bus_resume)
+		return -ENOENT;
+	if (HCD_RH_RUNNING(hcd))
+		return 0;
+
+	hcd->state = HC_STATE_RESUMING;
+	status = hcd->driver->bus_resume(hcd);
+	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+	if (status == 0) {
+		struct usb_device *udev;
+		int port1;
+
+		spin_lock_irq(&hcd_root_hub_lock);
+		if (!HCD_DEAD(hcd)) {
+			usb_set_device_state(rhdev, rhdev->actconfig
+					? USB_STATE_CONFIGURED
+					: USB_STATE_ADDRESS);
+			set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+			hcd->state = HC_STATE_RUNNING;
+		}
+		spin_unlock_irq(&hcd_root_hub_lock);
+
+		/*
+		 * Check whether any of the enabled ports on the root hub are
+		 * unsuspended.  If they are then a TRSMRCY delay is needed
+		 * (this is what the USB-2 spec calls a "global resume").
+		 * Otherwise we can skip the delay.
+		 */
+		usb_hub_for_each_child(rhdev, port1, udev) {
+			if (udev->state != USB_STATE_NOTATTACHED &&
+					!udev->port_is_suspended) {
+				usleep_range(10000, 11000);	/* TRSMRCY */
+				break;
+			}
+		}
+	} else {
+		hcd->state = old_state;
+		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+				"resume", status);
+		if (status != -ESHUTDOWN)
+			usb_hc_died(hcd);
+	}
+	return status;
+}
+
+/* Workqueue routine for root-hub remote wakeup */
+static void hcd_resume_work(struct work_struct *work)
+{
+	struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
+	struct usb_device *udev = hcd->self.root_hub;
+
+	usb_remote_wakeup(udev);
+}
+
+/**
+ * usb_hcd_resume_root_hub - called by HCD to resume its root hub
+ * @hcd: host controller for this root hub
+ *
+ * The USB host controller calls this function when its root hub is
+ * suspended (with the remote wakeup feature enabled) and a remote
+ * wakeup request is received.  The routine submits a workqueue request
+ * to resume the root hub (that is, manage its downstream ports again).
+ */
+void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	if (hcd->rh_registered) {
+		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+		queue_work(pm_wq, &hcd->wakeup_work);
+	}
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
+
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_USB_OTG
+
+/**
+ * usb_bus_start_enum - start immediate enumeration (for OTG)
+ * @bus: the bus (must use hcd framework)
+ * @port_num: 1-based number of port; usually bus->otg_port
+ * Context: in_interrupt()
+ *
+ * Starts enumeration, with an immediate reset followed later by
+ * hub_wq identifying and possibly configuring the device.
+ * This is needed by OTG controller drivers, where it helps meet
+ * HNP protocol timing requirements for starting a port reset.
+ *
+ * Return: 0 if successful.
+ */
+int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
+{
+	struct usb_hcd		*hcd;
+	int			status = -EOPNOTSUPP;
+
+	/* NOTE: since HNP can't start by grabbing the bus's address0_sem,
+	 * boards with root hubs hooked up to internal devices (instead of
+	 * just the OTG port) may need more attention to resetting...
+	 */
+	hcd = container_of (bus, struct usb_hcd, self);
+	if (port_num && hcd->driver->start_port_reset)
+		status = hcd->driver->start_port_reset(hcd, port_num);
+
+	/* allocate hub_wq shortly after (first) root port reset finishes;
+	 * it may issue others, until at least 50 msecs have passed.
+	 */
+	if (status == 0)
+		mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
+	return status;
+}
+EXPORT_SYMBOL_GPL(usb_bus_start_enum);
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
+ * @irq: the IRQ being raised
+ * @__hcd: pointer to the HCD whose IRQ is being signaled
+ *
+ * If the controller isn't HALTed, calls the driver's irq handler.
+ * Checks whether the controller is now dead.
+ *
+ * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
+ */
+irqreturn_t usb_hcd_irq (int irq, void *__hcd)
+{
+	struct usb_hcd		*hcd = __hcd;
+	irqreturn_t		rc;
+
+	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
+		rc = IRQ_NONE;
+	else if (hcd->driver->irq(hcd) == IRQ_NONE)
+		rc = IRQ_NONE;
+	else
+		rc = IRQ_HANDLED;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_irq);
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
+ * @hcd: pointer to the HCD representing the controller
+ *
+ * This is called by bus glue to report a USB host controller that died
+ * while operations may still have been pending.  It's called automatically
+ * by the PCI glue, so only glue for non-PCI busses should need to call it.
+ *
+ * Only call this function with the primary HCD.
+ */
+void usb_hc_died (struct usb_hcd *hcd)
+{
+	unsigned long flags;
+
+	dev_err (hcd->self.controller, "HC died; cleaning up\n");
+
+	spin_lock_irqsave (&hcd_root_hub_lock, flags);
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	set_bit(HCD_FLAG_DEAD, &hcd->flags);
+	if (hcd->rh_registered) {
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+		/* make hub_wq clean up old urbs and devices */
+		usb_set_device_state (hcd->self.root_hub,
+				USB_STATE_NOTATTACHED);
+		usb_kick_hub_wq(hcd->self.root_hub);
+	}
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
+		hcd = hcd->shared_hcd;
+		if (hcd->rh_registered) {
+			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+			/* make hub_wq clean up old urbs and devices */
+			usb_set_device_state(hcd->self.root_hub,
+					USB_STATE_NOTATTACHED);
+			usb_kick_hub_wq(hcd->self.root_hub);
+		}
+	}
+	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
+	/* Make sure that the other roothub is also deallocated. */
+}
+EXPORT_SYMBOL_GPL (usb_hc_died);
+
+/*-------------------------------------------------------------------------*/
+
+static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
+{
+
+	spin_lock_init(&bh->lock);
+	INIT_LIST_HEAD(&bh->head);
+	tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
+}
+
+/**
+ * usb_create_shared_hcd - create and initialize an HCD structure
+ * @driver: HC driver that will use this hcd
+ * @dev: device for this HC, stored in hcd->self.controller
+ * @bus_name: value to store in hcd->self.bus_name
+ * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
+ *              PCI device.  Only allocate certain resources for the primary HCD
+ * Context: !in_interrupt()
+ *
+ * Allocate a struct usb_hcd, with extra space at the end for the
+ * HC driver's private data.  Initialize the generic members of the
+ * hcd structure.
+ *
+ * Return: On success, a pointer to the created and initialized HCD structure.
+ * On failure (e.g. if memory is unavailable), %NULL.
+ */
+struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *primary_hcd)
+{
+	struct usb_hcd *hcd;
+
+	hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
+	if (!hcd) {
+		dev_dbg (dev, "hcd alloc failed\n");
+		return NULL;
+	}
+	if (primary_hcd == NULL) {
+		hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
+				GFP_KERNEL);
+		if (!hcd->bandwidth_mutex) {
+			kfree(hcd);
+			dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
+			return NULL;
+		}
+		mutex_init(hcd->bandwidth_mutex);
+		dev_set_drvdata(dev, hcd);
+	} else {
+		mutex_lock(&usb_port_peer_mutex);
+		hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
+		hcd->primary_hcd = primary_hcd;
+		primary_hcd->primary_hcd = primary_hcd;
+		hcd->shared_hcd = primary_hcd;
+		primary_hcd->shared_hcd = hcd;
+		mutex_unlock(&usb_port_peer_mutex);
+	}
+
+	kref_init(&hcd->kref);
+
+	usb_bus_init(&hcd->self);
+	hcd->self.controller = dev;
+	hcd->self.bus_name = bus_name;
+	hcd->self.uses_dma = (dev->dma_mask != NULL);
+
+	init_timer(&hcd->rh_timer);
+	hcd->rh_timer.function = rh_timer_func;
+	hcd->rh_timer.data = (unsigned long) hcd;
+#ifdef CONFIG_PM
+	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
+#endif
+
+	hcd->driver = driver;
+	hcd->speed = driver->flags & HCD_MASK;
+	hcd->product_desc = (driver->product_desc) ? driver->product_desc :
+			"USB Host Controller";
+	return hcd;
+}
+EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
+
+/**
+ * usb_create_hcd - create and initialize an HCD structure
+ * @driver: HC driver that will use this hcd
+ * @dev: device for this HC, stored in hcd->self.controller
+ * @bus_name: value to store in hcd->self.bus_name
+ * Context: !in_interrupt()
+ *
+ * Allocate a struct usb_hcd, with extra space at the end for the
+ * HC driver's private data.  Initialize the generic members of the
+ * hcd structure.
+ *
+ * Return: On success, a pointer to the created and initialized HCD
+ * structure. On failure (e.g. if memory is unavailable), %NULL.
+ */
+struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name)
+{
+	return usb_create_shared_hcd(driver, dev, bus_name, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_create_hcd);
+
+/*
+ * Roothubs that share one PCI device must also share the bandwidth mutex.
+ * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
+ * deallocated.
+ *
+ * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
+ * freed.  When hcd_release() is called for either hcd in a peer set
+ * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to
+ * block new peering attempts
+ */
+static void hcd_release(struct kref *kref)
+{
+	struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
+
+	mutex_lock(&usb_port_peer_mutex);
+	if (usb_hcd_is_primary_hcd(hcd))
+		kfree(hcd->bandwidth_mutex);
+	if (hcd->shared_hcd) {
+		struct usb_hcd *peer = hcd->shared_hcd;
+
+		peer->shared_hcd = NULL;
+		if (peer->primary_hcd == hcd)
+			peer->primary_hcd = NULL;
+	}
+	mutex_unlock(&usb_port_peer_mutex);
+	kfree(hcd);
+}
+
+struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
+{
+	if (hcd)
+		kref_get (&hcd->kref);
+	return hcd;
+}
+EXPORT_SYMBOL_GPL(usb_get_hcd);
+
+void usb_put_hcd (struct usb_hcd *hcd)
+{
+	if (hcd)
+		kref_put (&hcd->kref, hcd_release);
+}
+EXPORT_SYMBOL_GPL(usb_put_hcd);
+
+int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
+{
+	if (!hcd->primary_hcd)
+		return 1;
+	return hcd == hcd->primary_hcd;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+	if (!hcd->driver->find_raw_port_number)
+		return port1;
+
+	return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
+static int usb_hcd_request_irqs(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags)
+{
+	int retval;
+
+	if (hcd->driver->irq) {
+
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+				hcd->driver->description, hcd->self.busnum);
+		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
+				hcd->irq_descr, hcd);
+		if (retval != 0) {
+			dev_err(hcd->self.controller,
+					"request interrupt %d failed\n",
+					irqnum);
+			return retval;
+		}
+		hcd->irq = irqnum;
+		dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
+				(hcd->driver->flags & HCD_MEMORY) ?
+					"io mem" : "io base",
+					(unsigned long long)hcd->rsrc_start);
+	} else {
+		hcd->irq = 0;
+		if (hcd->rsrc_start)
+			dev_info(hcd->self.controller, "%s 0x%08llx\n",
+					(hcd->driver->flags & HCD_MEMORY) ?
+					"io mem" : "io base",
+					(unsigned long long)hcd->rsrc_start);
+	}
+	return 0;
+}
+
+/*
+ * Before we free this root hub, flush in-flight peering attempts
+ * and disable peer lookups
+ */
+static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
+{
+	struct usb_device *rhdev;
+
+	mutex_lock(&usb_port_peer_mutex);
+	rhdev = hcd->self.root_hub;
+	hcd->self.root_hub = NULL;
+	mutex_unlock(&usb_port_peer_mutex);
+	usb_put_dev(rhdev);
+}
+
+/**
+ * usb_add_hcd - finish generic HCD structure initialization and register
+ * @hcd: the usb_hcd structure to initialize
+ * @irqnum: Interrupt line to allocate
+ * @irqflags: Interrupt type flags
+ *
+ * Finish the remaining parts of generic HCD initialization: allocate the
+ * buffers of consistent memory, register the bus, request the IRQ line,
+ * and call the driver's reset() and start() routines.
+ */
+int usb_add_hcd(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags)
+{
+	int retval;
+	struct usb_device *rhdev;
+
+	if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
+		struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
+
+		if (IS_ERR(phy)) {
+			retval = PTR_ERR(phy);
+			if (retval == -EPROBE_DEFER)
+				return retval;
+		} else {
+			retval = usb_phy_init(phy);
+			if (retval) {
+				usb_put_phy(phy);
+				return retval;
+			}
+			hcd->usb_phy = phy;
+			hcd->remove_phy = 1;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
+		struct phy *phy = phy_get(hcd->self.controller, "usb");
+
+		if (IS_ERR(phy)) {
+			retval = PTR_ERR(phy);
+			if (retval == -EPROBE_DEFER)
+				goto err_phy;
+		} else {
+			retval = phy_init(phy);
+			if (retval) {
+				phy_put(phy);
+				goto err_phy;
+			}
+			retval = phy_power_on(phy);
+			if (retval) {
+				phy_exit(phy);
+				phy_put(phy);
+				goto err_phy;
+			}
+			hcd->phy = phy;
+			hcd->remove_phy = 1;
+		}
+	}
+
+	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+
+	/* Keep old behaviour if authorized_default is not in [0, 1]. */
+	if (authorized_default < 0 || authorized_default > 1)
+		hcd->authorized_default = hcd->wireless ? 0 : 1;
+	else
+		hcd->authorized_default = authorized_default;
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* HC is in reset state, but accessible.  Now do the one-time init,
+	 * bottom up so that hcds can customize the root hubs before hub_wq
+	 * starts talking to them.  (Note, bus id is assigned early too.)
+	 */
+	if ((retval = hcd_buffer_create(hcd)) != 0) {
+		dev_dbg(hcd->self.controller, "pool alloc failed\n");
+		goto err_create_buf;
+	}
+
+	if ((retval = usb_register_bus(&hcd->self)) < 0)
+		goto err_register_bus;
+
+	if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+		dev_err(hcd->self.controller, "unable to allocate root hub\n");
+		retval = -ENOMEM;
+		goto err_allocate_root_hub;
+	}
+	mutex_lock(&usb_port_peer_mutex);
+	hcd->self.root_hub = rhdev;
+	mutex_unlock(&usb_port_peer_mutex);
+
+	switch (hcd->speed) {
+	case HCD_USB11:
+		rhdev->speed = USB_SPEED_FULL;
+		break;
+	case HCD_USB2:
+		rhdev->speed = USB_SPEED_HIGH;
+		break;
+	case HCD_USB25:
+		rhdev->speed = USB_SPEED_WIRELESS;
+		break;
+	case HCD_USB3:
+		rhdev->speed = USB_SPEED_SUPER;
+		break;
+	default:
+		retval = -EINVAL;
+		goto err_set_rh_speed;
+	}
+
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_set_wakeup_capable(&rhdev->dev, 1);
+
+	/* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
+	 * registered.  But since the controller can die at any time,
+	 * let's initialize the flag before touching the hardware.
+	 */
+	set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+
+	/* "reset" is misnamed; its role is now one-time init. the controller
+	 * should already have been reset (and boot firmware kicked off etc).
+	 */
+	if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
+		dev_err(hcd->self.controller, "can't setup: %d\n", retval);
+		goto err_hcd_driver_setup;
+	}
+	hcd->rh_pollable = 1;
+
+	/* NOTE: root hub and controller capabilities may not be the same */
+	if (device_can_wakeup(hcd->self.controller)
+			&& device_can_wakeup(&hcd->self.root_hub->dev))
+		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+
+	/* initialize tasklets */
+	init_giveback_urb_bh(&hcd->high_prio_bh);
+	init_giveback_urb_bh(&hcd->low_prio_bh);
+
+	/* enable irqs just before we start the controller,
+	 * if the BIOS provides legacy PCI irqs.
+	 */
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
+		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
+		if (retval)
+			goto err_request_irq;
+	}
+
+	hcd->state = HC_STATE_RUNNING;
+	retval = hcd->driver->start(hcd);
+	if (retval < 0) {
+		dev_err(hcd->self.controller, "startup error %d\n", retval);
+		goto err_hcd_driver_start;
+	}
+
+	/* starting here, usbcore will pay attention to this root hub */
+	if ((retval = register_root_hub(hcd)) != 0)
+		goto err_register_root_hub;
+
+	retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+	if (retval < 0) {
+		printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
+		       retval);
+		goto error_create_attr_group;
+	}
+	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
+		usb_hcd_poll_rh_status(hcd);
+
+	return retval;
+
+error_create_attr_group:
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	if (HC_IS_RUNNING(hcd->state))
+		hcd->state = HC_STATE_QUIESCING;
+	spin_lock_irq(&hcd_root_hub_lock);
+	hcd->rh_registered = 0;
+	spin_unlock_irq(&hcd_root_hub_lock);
+
+#ifdef CONFIG_PM
+	cancel_work_sync(&hcd->wakeup_work);
+#endif
+	mutex_lock(&usb_bus_list_lock);
+	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
+	mutex_unlock(&usb_bus_list_lock);
+err_register_root_hub:
+	hcd->rh_pollable = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+	hcd->driver->stop(hcd);
+	hcd->state = HC_STATE_HALT;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+err_hcd_driver_start:
+	if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
+		free_irq(irqnum, hcd);
+err_request_irq:
+err_hcd_driver_setup:
+err_set_rh_speed:
+	usb_put_invalidate_rhdev(hcd);
+err_allocate_root_hub:
+	usb_deregister_bus(&hcd->self);
+err_register_bus:
+	hcd_buffer_destroy(hcd);
+err_create_buf:
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
+		phy_power_off(hcd->phy);
+		phy_exit(hcd->phy);
+		phy_put(hcd->phy);
+		hcd->phy = NULL;
+	}
+err_phy:
+	if (hcd->remove_phy && hcd->usb_phy) {
+		usb_phy_shutdown(hcd->usb_phy);
+		usb_put_phy(hcd->usb_phy);
+		hcd->usb_phy = NULL;
+	}
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usb_add_hcd);
+
+/**
+ * usb_remove_hcd - shutdown processing for generic HCDs
+ * @hcd: the usb_hcd structure to remove
+ * Context: !in_interrupt()
+ *
+ * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
+ * invoking the HCD's stop() method.
+ */
+void usb_remove_hcd(struct usb_hcd *hcd)
+{
+	struct usb_device *rhdev = hcd->self.root_hub;
+
+	dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
+
+	usb_get_dev(rhdev);
+	sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+
+	clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+	if (HC_IS_RUNNING (hcd->state))
+		hcd->state = HC_STATE_QUIESCING;
+
+	dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
+	spin_lock_irq (&hcd_root_hub_lock);
+	hcd->rh_registered = 0;
+	spin_unlock_irq (&hcd_root_hub_lock);
+
+#ifdef CONFIG_PM
+	cancel_work_sync(&hcd->wakeup_work);
+#endif
+
+	mutex_lock(&usb_bus_list_lock);
+	usb_disconnect(&rhdev);		/* Sets rhdev to NULL */
+	mutex_unlock(&usb_bus_list_lock);
+
+	/*
+	 * tasklet_kill() isn't needed here because:
+	 * - driver's disconnect() called from usb_disconnect() should
+	 *   make sure its URBs are completed during the disconnect()
+	 *   callback
+	 *
+	 * - it is too late to run complete() here since driver may have
+	 *   been removed already now
+	 */
+
+	/* Prevent any more root-hub status calls from the timer.
+	 * The HCD might still restart the timer (if a port status change
+	 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
+	 * the hub_status_data() callback.
+	 */
+	hcd->rh_pollable = 0;
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	hcd->driver->stop(hcd);
+	hcd->state = HC_STATE_HALT;
+
+	/* In case the HCD restarted the timer, stop it again. */
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		if (hcd->irq > 0)
+			free_irq(hcd->irq, hcd);
+	}
+
+	usb_deregister_bus(&hcd->self);
+	hcd_buffer_destroy(hcd);
+
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
+		phy_power_off(hcd->phy);
+		phy_exit(hcd->phy);
+		phy_put(hcd->phy);
+		hcd->phy = NULL;
+	}
+	if (hcd->remove_phy && hcd->usb_phy) {
+		usb_phy_shutdown(hcd->usb_phy);
+		usb_put_phy(hcd->usb_phy);
+		hcd->usb_phy = NULL;
+	}
+
+	usb_put_invalidate_rhdev(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_remove_hcd);
+
+void
+usb_hcd_platform_shutdown(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations *mon_ops;
+
+/*
+ * The registration is unlocked.
+ * We do it this way because we do not want to lock in hot paths.
+ *
+ * Notice that the code is minimally error-proof. Because usbmon needs
+ * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
+ */
+
+int usb_mon_register (struct usb_mon_operations *ops)
+{
+
+	if (mon_ops)
+		return -EBUSY;
+
+	mon_ops = ops;
+	mb();
+	return 0;
+}
+EXPORT_SYMBOL_GPL (usb_mon_register);
+
+void usb_mon_deregister (void)
+{
+
+	if (mon_ops == NULL) {
+		printk(KERN_ERR "USB: monitor was not registered\n");
+		return;
+	}
+	mon_ops = NULL;
+	mb();
+}
+EXPORT_SYMBOL_GPL (usb_mon_deregister);
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
new file mode 100644
index 000000000..8f9ff4d4c
--- /dev/null
+++ b/drivers/usb/core/hub.c
@@ -0,0 +1,5670 @@
+/*
+ * USB hub driver.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999 Johannes Erdfelt
+ * (C) Copyright 1999 Gregory P. Smith
+ * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au)
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/usb.h>
+#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/quirks.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/random.h>
+#include <linux/pm_qos.h>
+
+#include <asm/uaccess.h>
+#include <asm/byteorder.h>
+
+#include "hub.h"
+#include "otg_whitelist.h"
+
+#define USB_VENDOR_GENESYS_LOGIC		0x05e3
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
+
+/* Protect struct usb_device->state and ->children members
+ * Note: Both are also protected by ->dev.sem, except that ->state can
+ * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
+static DEFINE_SPINLOCK(device_state_lock);
+
+/* workqueue to process hub events */
+static struct workqueue_struct *hub_wq;
+static void hub_event(struct work_struct *work);
+
+/* synchronize hub-port add/remove and peering operations */
+DEFINE_MUTEX(usb_port_peer_mutex);
+
+/* cycle leds on hubs that aren't blinking for attention */
+static bool blinkenlights = 0;
+module_param (blinkenlights, bool, S_IRUGO);
+MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
+
+/*
+ * Device SATA8000 FW1.0 from DATAST0R Technology Corp requires about
+ * 10 seconds to send reply for the initial 64-byte descriptor request.
+ */
+/* define initial 64-byte descriptor request timeout in milliseconds */
+static int initial_descriptor_timeout = USB_CTRL_GET_TIMEOUT;
+module_param(initial_descriptor_timeout, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(initial_descriptor_timeout,
+		"initial 64-byte descriptor request timeout in milliseconds "
+		"(default 5000 - 5.0 seconds)");
+
+/*
+ * As of 2.6.10 we introduce a new USB device initialization scheme which
+ * closely resembles the way Windows works.  Hopefully it will be compatible
+ * with a wider range of devices than the old scheme.  However some previously
+ * working devices may start giving rise to "device not accepting address"
+ * errors; if that happens the user can try the old scheme by adjusting the
+ * following module parameters.
+ *
+ * For maximum flexibility there are two boolean parameters to control the
+ * hub driver's behavior.  On the first initialization attempt, if the
+ * "old_scheme_first" parameter is set then the old scheme will be used,
+ * otherwise the new scheme is used.  If that fails and "use_both_schemes"
+ * is set, then the driver will make another attempt, using the other scheme.
+ */
+static bool old_scheme_first = 0;
+module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(old_scheme_first,
+		 "start with the old device initialization scheme");
+
+static bool use_both_schemes = 1;
+module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(use_both_schemes,
+		"try the other device initialization scheme if the "
+		"first one fails");
+
+/* Mutual exclusion for EHCI CF initialization.  This interferes with
+ * port reset on some companion controllers.
+ */
+DECLARE_RWSEM(ehci_cf_port_reset_rwsem);
+EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
+
+#define HUB_DEBOUNCE_TIMEOUT	2000
+#define HUB_DEBOUNCE_STEP	  25
+#define HUB_DEBOUNCE_STABLE	 100
+
+static void hub_release(struct kref *kref);
+static int usb_reset_and_verify_device(struct usb_device *udev);
+
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
+{
+	if (hub_is_superspeed(hub->hdev))
+		return "5.0 Gb/s";
+	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+		return "480 Mb/s";
+	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+		return "1.5 Mb/s";
+	else
+		return "12 Mb/s";
+}
+
+/* Note that hdev or one of its children must be locked! */
+struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
+{
+	if (!hdev || !hdev->actconfig || !hdev->maxchild)
+		return NULL;
+	return usb_get_intfdata(hdev->actconfig->interface[0]);
+}
+
+int usb_device_supports_lpm(struct usb_device *udev)
+{
+	/* USB 2.1 (and greater) devices indicate LPM support through
+	 * their USB 2.0 Extended Capabilities BOS descriptor.
+	 */
+	if (udev->speed == USB_SPEED_HIGH) {
+		if (udev->bos->ext_cap &&
+			(USB_LPM_SUPPORT &
+			 le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
+			return 1;
+		return 0;
+	}
+
+	/*
+	 * According to the USB 3.0 spec, all USB 3.0 devices must support LPM.
+	 * However, there are some that don't, and they set the U1/U2 exit
+	 * latencies to zero.
+	 */
+	if (!udev->bos->ss_cap) {
+		dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n");
+		return 0;
+	}
+
+	if (udev->bos->ss_cap->bU1devExitLat == 0 &&
+			udev->bos->ss_cap->bU2DevExitLat == 0) {
+		if (udev->parent)
+			dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n");
+		else
+			dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n");
+		return 0;
+	}
+
+	if (!udev->parent || udev->parent->lpm_capable)
+		return 1;
+	return 0;
+}
+
+/*
+ * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
+ * either U1 or U2.
+ */
+static void usb_set_lpm_mel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency)
+{
+	unsigned int total_mel;
+	unsigned int device_mel;
+	unsigned int hub_mel;
+
+	/*
+	 * Calculate the time it takes to transition all links from the roothub
+	 * to the parent hub into U0.  The parent hub must then decode the
+	 * packet (hub header decode latency) to figure out which port it was
+	 * bound for.
+	 *
+	 * The Hub Header decode latency is expressed in 0.1us intervals (0x1
+	 * means 0.1us).  Multiply that by 100 to get nanoseconds.
+	 */
+	total_mel = hub_lpm_params->mel +
+		(hub->descriptor->u.ss.bHubHdrDecLat * 100);
+
+	/*
+	 * How long will it take to transition the downstream hub's port into
+	 * U0?  The greater of either the hub exit latency or the device exit
+	 * latency.
+	 *
+	 * The BOS U1/U2 exit latencies are expressed in 1us intervals.
+	 * Multiply that by 1000 to get nanoseconds.
+	 */
+	device_mel = udev_exit_latency * 1000;
+	hub_mel = hub_exit_latency * 1000;
+	if (device_mel > hub_mel)
+		total_mel += device_mel;
+	else
+		total_mel += hub_mel;
+
+	udev_lpm_params->mel = total_mel;
+}
+
+/*
+ * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate
+ * a transition from either U1 or U2.
+ */
+static void usb_set_lpm_pel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency,
+		unsigned int port_to_port_exit_latency)
+{
+	unsigned int first_link_pel;
+	unsigned int hub_pel;
+
+	/*
+	 * First, the device sends an LFPS to transition the link between the
+	 * device and the parent hub into U0.  The exit latency is the bigger of
+	 * the device exit latency or the hub exit latency.
+	 */
+	if (udev_exit_latency > hub_exit_latency)
+		first_link_pel = udev_exit_latency * 1000;
+	else
+		first_link_pel = hub_exit_latency * 1000;
+
+	/*
+	 * When the hub starts to receive the LFPS, there is a slight delay for
+	 * it to figure out that one of the ports is sending an LFPS.  Then it
+	 * will forward the LFPS to its upstream link.  The exit latency is the
+	 * delay, plus the PEL that we calculated for this hub.
+	 */
+	hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel;
+
+	/*
+	 * According to figure C-7 in the USB 3.0 spec, the PEL for this device
+	 * is the greater of the two exit latencies.
+	 */
+	if (first_link_pel > hub_pel)
+		udev_lpm_params->pel = first_link_pel;
+	else
+		udev_lpm_params->pel = hub_pel;
+}
+
+/*
+ * Set the System Exit Latency (SEL) to indicate the total worst-case time from
+ * when a device initiates a transition to U0, until when it will receive the
+ * first packet from the host controller.
+ *
+ * Section C.1.5.1 describes the four components to this:
+ *  - t1: device PEL
+ *  - t2: time for the ERDY to make it from the device to the host.
+ *  - t3: a host-specific delay to process the ERDY.
+ *  - t4: time for the packet to make it from the host to the device.
+ *
+ * t3 is specific to both the xHCI host and the platform the host is integrated
+ * into.  The Intel HW folks have said it's negligible, FIXME if a different
+ * vendor says otherwise.
+ */
+static void usb_set_lpm_sel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+	unsigned int total_sel;
+
+	/* t1 = device PEL */
+	total_sel = udev_lpm_params->pel;
+	/* How many external hubs are in between the device & the root port. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+	/* t2 = 2.1us + 250ns * (num_hubs - 1) */
+	if (num_hubs > 0)
+		total_sel += 2100 + 250 * (num_hubs - 1);
+
+	/* t4 = 250ns * num_hubs */
+	total_sel += 250 * num_hubs;
+
+	udev_lpm_params->sel = total_sel;
+}
+
+static void usb_set_lpm_parameters(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+	unsigned int port_to_port_delay;
+	unsigned int udev_u1_del;
+	unsigned int udev_u2_del;
+	unsigned int hub_u1_del;
+	unsigned int hub_u2_del;
+
+	if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER)
+		return;
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+	/* It doesn't take time to transition the roothub into U0, since it
+	 * doesn't have an upstream link.
+	 */
+	if (!hub)
+		return;
+
+	udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
+	udev_u2_del = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat);
+	hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
+	hub_u2_del = le16_to_cpu(udev->parent->bos->ss_cap->bU2DevExitLat);
+
+	usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del);
+
+	usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del);
+
+	/*
+	 * Appendix C, section C.2.2.2, says that there is a slight delay from
+	 * when the parent hub notices the downstream port is trying to
+	 * transition to U0 to when the hub initiates a U0 transition on its
+	 * upstream port.  The section says the delays are tPort2PortU1EL and
+	 * tPort2PortU2EL, but it doesn't define what they are.
+	 *
+	 * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking
+	 * about the same delays.  Use the maximum delay calculations from those
+	 * sections.  For U1, it's tHubPort2PortExitLat, which is 1us max.  For
+	 * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat.  I
+	 * assume the device exit latencies they are talking about are the hub
+	 * exit latencies.
+	 *
+	 * What do we do if the U2 exit latency is less than the U1 exit
+	 * latency?  It's possible, although not likely...
+	 */
+	port_to_port_delay = 1;
+
+	usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del,
+			port_to_port_delay);
+
+	if (hub_u2_del > hub_u1_del)
+		port_to_port_delay = 1 + hub_u2_del - hub_u1_del;
+	else
+		port_to_port_delay = 1 + hub_u1_del;
+
+	usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del,
+			port_to_port_delay);
+
+	/* Now that we've got PEL, calculate SEL. */
+	usb_set_lpm_sel(udev, &udev->u1_params);
+	usb_set_lpm_sel(udev, &udev->u2_params);
+}
+
+/* USB 2.0 spec Section 11.24.4.5 */
+static int get_hub_descriptor(struct usb_device *hdev, void *data)
+{
+	int i, ret, size;
+	unsigned dtype;
+
+	if (hub_is_superspeed(hdev)) {
+		dtype = USB_DT_SS_HUB;
+		size = USB_DT_SS_HUB_SIZE;
+	} else {
+		dtype = USB_DT_HUB;
+		size = sizeof(struct usb_hub_descriptor);
+	}
+
+	for (i = 0; i < 3; i++) {
+		ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
+			dtype << 8, 0, data, size,
+			USB_CTRL_GET_TIMEOUT);
+		if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
+			return ret;
+	}
+	return -EINVAL;
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.1
+ */
+static int clear_hub_feature(struct usb_device *hdev, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.2
+ */
+int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.13
+ */
+static int set_port_feature(struct usb_device *hdev, int port1, int feature)
+{
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
+		NULL, 0, 1000);
+}
+
+static char *to_led_name(int selector)
+{
+	switch (selector) {
+	case HUB_LED_AMBER:
+		return "amber";
+	case HUB_LED_GREEN:
+		return "green";
+	case HUB_LED_OFF:
+		return "off";
+	case HUB_LED_AUTO:
+		return "auto";
+	default:
+		return "??";
+	}
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
+ * for info about using port indicators
+ */
+static void set_port_led(struct usb_hub *hub, int port1, int selector)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int status;
+
+	status = set_port_feature(hub->hdev, (selector << 8) | port1,
+			USB_PORT_FEAT_INDICATOR);
+	dev_dbg(&port_dev->dev, "indicator %s status %d\n",
+		to_led_name(selector), status);
+}
+
+#define	LED_CYCLE_PERIOD	((2*HZ)/3)
+
+static void led_work (struct work_struct *work)
+{
+	struct usb_hub		*hub =
+		container_of(work, struct usb_hub, leds.work);
+	struct usb_device	*hdev = hub->hdev;
+	unsigned		i;
+	unsigned		changed = 0;
+	int			cursor = -1;
+
+	if (hdev->state != USB_STATE_CONFIGURED || hub->quiescing)
+		return;
+
+	for (i = 0; i < hdev->maxchild; i++) {
+		unsigned	selector, mode;
+
+		/* 30%-50% duty cycle */
+
+		switch (hub->indicator[i]) {
+		/* cycle marker */
+		case INDICATOR_CYCLE:
+			cursor = i;
+			selector = HUB_LED_AUTO;
+			mode = INDICATOR_AUTO;
+			break;
+		/* blinking green = sw attention */
+		case INDICATOR_GREEN_BLINK:
+			selector = HUB_LED_GREEN;
+			mode = INDICATOR_GREEN_BLINK_OFF;
+			break;
+		case INDICATOR_GREEN_BLINK_OFF:
+			selector = HUB_LED_OFF;
+			mode = INDICATOR_GREEN_BLINK;
+			break;
+		/* blinking amber = hw attention */
+		case INDICATOR_AMBER_BLINK:
+			selector = HUB_LED_AMBER;
+			mode = INDICATOR_AMBER_BLINK_OFF;
+			break;
+		case INDICATOR_AMBER_BLINK_OFF:
+			selector = HUB_LED_OFF;
+			mode = INDICATOR_AMBER_BLINK;
+			break;
+		/* blink green/amber = reserved */
+		case INDICATOR_ALT_BLINK:
+			selector = HUB_LED_GREEN;
+			mode = INDICATOR_ALT_BLINK_OFF;
+			break;
+		case INDICATOR_ALT_BLINK_OFF:
+			selector = HUB_LED_AMBER;
+			mode = INDICATOR_ALT_BLINK;
+			break;
+		default:
+			continue;
+		}
+		if (selector != HUB_LED_AUTO)
+			changed = 1;
+		set_port_led(hub, i + 1, selector);
+		hub->indicator[i] = mode;
+	}
+	if (!changed && blinkenlights) {
+		cursor++;
+		cursor %= hdev->maxchild;
+		set_port_led(hub, cursor + 1, HUB_LED_GREEN);
+		hub->indicator[cursor] = INDICATOR_CYCLE;
+		changed++;
+	}
+	if (changed)
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
+}
+
+/* use a short timeout for hub/port status fetches */
+#define	USB_STS_TIMEOUT		1000
+#define	USB_STS_RETRIES		5
+
+/*
+ * USB 2.0 spec Section 11.24.2.6
+ */
+static int get_hub_status(struct usb_device *hdev,
+		struct usb_hub_status *data)
+{
+	int i, status = -ETIMEDOUT;
+
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
+		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
+			data, sizeof(*data), USB_STS_TIMEOUT);
+	}
+	return status;
+}
+
+/*
+ * USB 2.0 spec Section 11.24.2.7
+ */
+static int get_port_status(struct usb_device *hdev, int port1,
+		struct usb_port_status *data)
+{
+	int i, status = -ETIMEDOUT;
+
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
+		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
+			data, sizeof(*data), USB_STS_TIMEOUT);
+	}
+	return status;
+}
+
+static int hub_port_status(struct usb_hub *hub, int port1,
+		u16 *status, u16 *change)
+{
+	int ret;
+
+	mutex_lock(&hub->status_mutex);
+	ret = get_port_status(hub->hdev, port1, &hub->status->port);
+	if (ret < 4) {
+		if (ret != -ENODEV)
+			dev_err(hub->intfdev,
+				"%s failed (err = %d)\n", __func__, ret);
+		if (ret >= 0)
+			ret = -EIO;
+	} else {
+		*status = le16_to_cpu(hub->status->port.wPortStatus);
+		*change = le16_to_cpu(hub->status->port.wPortChange);
+
+		ret = 0;
+	}
+	mutex_unlock(&hub->status_mutex);
+	return ret;
+}
+
+static void kick_hub_wq(struct usb_hub *hub)
+{
+	struct usb_interface *intf;
+
+	if (hub->disconnected || work_pending(&hub->events))
+		return;
+
+	/*
+	 * Suppress autosuspend until the event is proceed.
+	 *
+	 * Be careful and make sure that the symmetric operation is
+	 * always called. We are here only when there is no pending
+	 * work for this hub. Therefore put the interface either when
+	 * the new work is called or when it is canceled.
+	 */
+	intf = to_usb_interface(hub->intfdev);
+	usb_autopm_get_interface_no_resume(intf);
+	kref_get(&hub->kref);
+
+	if (queue_work(hub_wq, &hub->events))
+		return;
+
+	/* the work has already been scheduled */
+	usb_autopm_put_interface_async(intf);
+	kref_put(&hub->kref, hub_release);
+}
+
+void usb_kick_hub_wq(struct usb_device *hdev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (hub)
+		kick_hub_wq(hub);
+}
+
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum)
+{
+	struct usb_hub *hub;
+
+	if (!hdev)
+		return;
+
+	hub = usb_hub_to_struct_hub(hdev);
+	if (hub) {
+		set_bit(portnum, hub->wakeup_bits);
+		kick_hub_wq(hub);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
+
+/* completion function, fires on port status changes and various faults */
+static void hub_irq(struct urb *urb)
+{
+	struct usb_hub *hub = urb->context;
+	int status = urb->status;
+	unsigned i;
+	unsigned long bits;
+
+	switch (status) {
+	case -ENOENT:		/* synchronous unlink */
+	case -ECONNRESET:	/* async unlink */
+	case -ESHUTDOWN:	/* hardware going away */
+		return;
+
+	default:		/* presumably an error */
+		/* Cause a hub reset after 10 consecutive errors */
+		dev_dbg (hub->intfdev, "transfer --> %d\n", status);
+		if ((++hub->nerrors < 10) || hub->error)
+			goto resubmit;
+		hub->error = status;
+		/* FALL THROUGH */
+
+	/* let hub_wq handle things */
+	case 0:			/* we got data:  port status changed */
+		bits = 0;
+		for (i = 0; i < urb->actual_length; ++i)
+			bits |= ((unsigned long) ((*hub->buffer)[i]))
+					<< (i*8);
+		hub->event_bits[0] = bits;
+		break;
+	}
+
+	hub->nerrors = 0;
+
+	/* Something happened, let hub_wq figure it out */
+	kick_hub_wq(hub);
+
+resubmit:
+	if (hub->quiescing)
+		return;
+
+	if ((status = usb_submit_urb (hub->urb, GFP_ATOMIC)) != 0
+			&& status != -ENODEV && status != -EPERM)
+		dev_err (hub->intfdev, "resubmit --> %d\n", status);
+}
+
+/* USB 2.0 spec Section 11.24.2.3 */
+static inline int
+hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
+{
+	/* Need to clear both directions for control ep */
+	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_CONTROL) {
+		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		if (status)
+			return status;
+	}
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
+			       tt, NULL, 0, 1000);
+}
+
+/*
+ * enumeration blocks hub_wq for a long time. we use keventd instead, since
+ * long blocking there is the exception, not the rule.  accordingly, HCDs
+ * talking to TTs must queue control transfers (not just bulk and iso), so
+ * both can talk to the same hub concurrently.
+ */
+static void hub_tt_work(struct work_struct *work)
+{
+	struct usb_hub		*hub =
+		container_of(work, struct usb_hub, tt.clear_work);
+	unsigned long		flags;
+
+	spin_lock_irqsave (&hub->tt.lock, flags);
+	while (!list_empty(&hub->tt.clear_list)) {
+		struct list_head	*next;
+		struct usb_tt_clear	*clear;
+		struct usb_device	*hdev = hub->hdev;
+		const struct hc_driver	*drv;
+		int			status;
+
+		next = hub->tt.clear_list.next;
+		clear = list_entry (next, struct usb_tt_clear, clear_list);
+		list_del (&clear->clear_list);
+
+		/* drop lock so HCD can concurrently report other TT errors */
+		spin_unlock_irqrestore (&hub->tt.lock, flags);
+		status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
+		if (status && status != -ENODEV)
+			dev_err (&hdev->dev,
+				"clear tt %d (%04x) error %d\n",
+				clear->tt, clear->devinfo, status);
+
+		/* Tell the HCD, even if the operation failed */
+		drv = clear->hcd->driver;
+		if (drv->clear_tt_buffer_complete)
+			(drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
+		kfree(clear);
+		spin_lock_irqsave(&hub->tt.lock, flags);
+	}
+	spin_unlock_irqrestore (&hub->tt.lock, flags);
+}
+
+/**
+ * usb_hub_set_port_power - control hub port's power state
+ * @hdev: USB device belonging to the usb hub
+ * @hub: target hub
+ * @port1: port index
+ * @set: expected status
+ *
+ * call this function to control port's power via setting or
+ * clearing the port's PORT_POWER feature.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
+			   int port1, bool set)
+{
+	int ret;
+
+	if (set)
+		ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+	else
+		ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+
+	if (ret)
+		return ret;
+
+	if (set)
+		set_bit(port1, hub->power_bits);
+	else
+		clear_bit(port1, hub->power_bits);
+	return 0;
+}
+
+/**
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
+ *
+ * High speed HCDs use this to tell the hub driver that some split control or
+ * bulk transaction failed in a way that requires clearing internal state of
+ * a transaction translator.  This is normally detected (and reported) from
+ * interrupt context.
+ *
+ * It may not be possible for that hub to handle additional full (or low)
+ * speed transactions until that state is fully cleared out.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_hub_clear_tt_buffer(struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	int			pipe = urb->pipe;
+	struct usb_tt		*tt = udev->tt;
+	unsigned long		flags;
+	struct usb_tt_clear	*clear;
+
+	/* we've got to cope with an arbitrary number of pending TT clears,
+	 * since each TT has "at least two" buffers that can need it (and
+	 * there can be many TTs per hub).  even if they're uncommon.
+	 */
+	if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
+		dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
+		/* FIXME recover somehow ... RESET_TT? */
+		return -ENOMEM;
+	}
+
+	/* info that CLEAR_TT_BUFFER needs */
+	clear->tt = tt->multi ? udev->ttport : 1;
+	clear->devinfo = usb_pipeendpoint (pipe);
+	clear->devinfo |= udev->devnum << 4;
+	clear->devinfo |= usb_pipecontrol (pipe)
+			? (USB_ENDPOINT_XFER_CONTROL << 11)
+			: (USB_ENDPOINT_XFER_BULK << 11);
+	if (usb_pipein (pipe))
+		clear->devinfo |= 1 << 15;
+
+	/* info for completion callback */
+	clear->hcd = bus_to_hcd(udev->bus);
+	clear->ep = urb->ep;
+
+	/* tell keventd to clear state for this TT */
+	spin_lock_irqsave (&tt->lock, flags);
+	list_add_tail (&clear->clear_list, &tt->clear_list);
+	schedule_work(&tt->clear_work);
+	spin_unlock_irqrestore (&tt->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
+
+static void hub_power_on(struct usb_hub *hub, bool do_delay)
+{
+	int port1;
+
+	/* Enable power on each port.  Some hubs have reserved values
+	 * of LPSM (> 2) in their descriptors, even though they are
+	 * USB 2.0 hubs.  Some hubs do not implement port-power switching
+	 * but only emulate it.  In all cases, the ports won't work
+	 * unless we send these messages to the hub.
+	 */
+	if (hub_is_port_power_switchable(hub))
+		dev_dbg(hub->intfdev, "enabling power on all ports\n");
+	else
+		dev_dbg(hub->intfdev, "trying to enable port power on "
+				"non-switchable hub\n");
+	for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
+		if (test_bit(port1, hub->power_bits))
+			set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
+		else
+			usb_clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_POWER);
+	if (do_delay)
+		msleep(hub_power_on_good_delay(hub));
+}
+
+static int hub_hub_status(struct usb_hub *hub,
+		u16 *status, u16 *change)
+{
+	int ret;
+
+	mutex_lock(&hub->status_mutex);
+	ret = get_hub_status(hub->hdev, &hub->status->hub);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			dev_err(hub->intfdev,
+				"%s failed (err = %d)\n", __func__, ret);
+	} else {
+		*status = le16_to_cpu(hub->status->hub.wHubStatus);
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
+		ret = 0;
+	}
+	mutex_unlock(&hub->status_mutex);
+	return ret;
+}
+
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+			unsigned int link_status)
+{
+	return set_port_feature(hub->hdev,
+			port1 | (link_status << 3),
+			USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+	int ret;
+	int total_time;
+	u16 portchange, portstatus;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return -EINVAL;
+
+	ret = hub_port_status(hub, port1, &portstatus, &portchange);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
+	 * Controller [1022:7814] will have spurious result making the following
+	 * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
+	 * as high-speed device if we set the usb 3.0 port link state to
+	 * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
+	 * check the state here to avoid the bug.
+	 */
+	if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_RX_DETECT) {
+		dev_dbg(&hub->ports[port1 - 1]->dev,
+			 "Not disabling port; link state is RxDetect\n");
+		return ret;
+	}
+
+	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+	if (ret)
+		return ret;
+
+	/* Wait for the link to enter the disabled state. */
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_SS_DISABLED)
+			break;
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+	if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+		dev_warn(&hub->ports[port1 - 1]->dev,
+				"Could not disable after %d ms\n", total_time);
+
+	return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+	int ret = 0;
+
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev))
+			ret = hub_usb3_port_disable(hub, port1);
+		else
+			ret = usb_clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+	}
+	if (ret && ret != -ENODEV)
+		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+	return ret;
+}
+
+/*
+ * Disable a port and mark a logical connect-change event, so that some
+ * time later hub_wq will disconnect() any existing usb_device on the port
+ * and will re-enumerate if there actually is a device attached.
+ */
+static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
+{
+	dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n");
+	hub_port_disable(hub, port1, 1);
+
+	/* FIXME let caller ask to power down the port:
+	 *  - some devices won't enumerate without a VBUS power cycle
+	 *  - SRP saves power that way
+	 *  - ... new call, TBD ...
+	 * That's easy if this hub can switch power per-port, and
+	 * hub_wq reactivates the port later (timer, SRP, etc).
+	 * Powerdown must be optional, because of reset/DFU.
+	 */
+
+	set_bit(port1, hub->change_bits);
+	kick_hub_wq(hub);
+}
+
+/**
+ * usb_remove_device - disable a device's port on its parent hub
+ * @udev: device to be disabled and removed
+ * Context: @udev locked, must be able to sleep.
+ *
+ * After @udev's port has been disabled, hub_wq is notified and it will
+ * see that the device has been disconnected.  When the device is
+ * physically unplugged and something is plugged in, the events will
+ * be received and processed normally.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+int usb_remove_device(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+	struct usb_interface *intf;
+
+	if (!udev->parent)	/* Can't remove a root hub */
+		return -EINVAL;
+	hub = usb_hub_to_struct_hub(udev->parent);
+	intf = to_usb_interface(hub->intfdev);
+
+	usb_autopm_get_interface(intf);
+	set_bit(udev->portnum, hub->removed_bits);
+	hub_port_logical_disconnect(hub, udev->portnum);
+	usb_autopm_put_interface(intf);
+	return 0;
+}
+
+enum hub_activation_type {
+	HUB_INIT, HUB_INIT2, HUB_INIT3,		/* INITs must come first */
+	HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME,
+};
+
+static void hub_init_func2(struct work_struct *ws);
+static void hub_init_func3(struct work_struct *ws);
+
+static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
+{
+	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
+	int port1;
+	int status;
+	bool need_debounce_delay = false;
+	unsigned delay;
+
+	/* Continue a partial initialization */
+	if (type == HUB_INIT2)
+		goto init2;
+	if (type == HUB_INIT3)
+		goto init3;
+
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
+	 * For any other type of activation, turn it on.
+	 */
+	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
+
+		/* Speed up system boot by using a delayed_work for the
+		 * hub's initial power-up delays.  This is pretty awkward
+		 * and the implementation looks like a home-brewed sort of
+		 * setjmp/longjmp, but it saves at least 100 ms for each
+		 * root hub (assuming usbcore is compiled into the kernel
+		 * rather than as a module).  It adds up.
+		 *
+		 * This can't be done for HUB_RESUME or HUB_RESET_RESUME
+		 * because for those activation types the ports have to be
+		 * operational when we return.  In theory this could be done
+		 * for HUB_POST_RESET, but it's easier not to.
+		 */
+		if (type == HUB_INIT) {
+			unsigned delay = hub_power_on_good_delay(hub);
+
+			hub_power_on(hub, false);
+			INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
+					msecs_to_jiffies(delay));
+
+			/* Suppress autosuspend until init is done */
+			usb_autopm_get_interface_no_resume(
+					to_usb_interface(hub->intfdev));
+			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
+		} else {
+			hub_power_on(hub, true);
+		}
+	}
+ init2:
+
+	/*
+	 * Check each port and set hub->change_bits to let hub_wq know
+	 * which ports need attention.
+	 */
+	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+		u16 portstatus, portchange;
+
+		portstatus = portchange = 0;
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			dev_dbg(&port_dev->dev, "status %04x change %04x\n",
+					portstatus, portchange);
+
+		/*
+		 * After anything other than HUB_RESUME (i.e., initialization
+		 * or any sort of reset), every port should be disabled.
+		 * Unconnected ports should likewise be disabled (paranoia),
+		 * and so should ports for which we have no usb_device.
+		 */
+		if ((portstatus & USB_PORT_STAT_ENABLE) && (
+				type != HUB_RESUME ||
+				!(portstatus & USB_PORT_STAT_CONNECTION) ||
+				!udev ||
+				udev->state == USB_STATE_NOTATTACHED)) {
+			/*
+			 * USB3 protocol ports will automatically transition
+			 * to Enabled state when detect an USB3.0 device attach.
+			 * Do not disable USB3 protocol ports, just pretend
+			 * power was lost
+			 */
+			portstatus &= ~USB_PORT_STAT_ENABLE;
+			if (!hub_is_superspeed(hdev))
+				usb_clear_port_feature(hdev, port1,
+						   USB_PORT_FEAT_ENABLE);
+		}
+
+		/* Clear status-change flags; we'll debounce later */
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		}
+		if (portchange & USB_PORT_STAT_C_ENABLE) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+		}
+		if (portchange & USB_PORT_STAT_C_RESET) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+		}
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
+		/* We can forget about a "removed" device when there's a
+		 * physical disconnect or the connect status changes.
+		 */
+		if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+				(portchange & USB_PORT_STAT_C_CONNECTION))
+			clear_bit(port1, hub->removed_bits);
+
+		if (!udev || udev->state == USB_STATE_NOTATTACHED) {
+			/* Tell hub_wq to disconnect the device or
+			 * check for a new connection
+			 */
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT))
+				set_bit(port1, hub->change_bits);
+
+		} else if (portstatus & USB_PORT_STAT_ENABLE) {
+			bool port_resumed = (portstatus &
+					USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_U0;
+			/* The power session apparently survived the resume.
+			 * If there was an overcurrent or suspend change
+			 * (i.e., remote wakeup request), have hub_wq
+			 * take care of it.  Look at the port link state
+			 * for USB 3.0 hubs, since they don't have a suspend
+			 * change bit, and they don't set the port link change
+			 * bit on device-initiated resume.
+			 */
+			if (portchange || (hub_is_superspeed(hub->hdev) &&
+						port_resumed))
+				set_bit(port1, hub->change_bits);
+
+		} else if (udev->persist_enabled) {
+#ifdef CONFIG_PM
+			udev->reset_resume = 1;
+#endif
+			/* Don't set the change_bits when the device
+			 * was powered off.
+			 */
+			if (test_bit(port1, hub->power_bits))
+				set_bit(port1, hub->change_bits);
+
+		} else {
+			/* The power session is gone; tell hub_wq */
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+			set_bit(port1, hub->change_bits);
+		}
+	}
+
+	/* If no port-status-change flags were set, we don't need any
+	 * debouncing.  If flags were set we can try to debounce the
+	 * ports all at once right now, instead of letting hub_wq do them
+	 * one at a time later on.
+	 *
+	 * If any port-status changes do occur during this delay, hub_wq
+	 * will see them later and handle them normally.
+	 */
+	if (need_debounce_delay) {
+		delay = HUB_DEBOUNCE_STABLE;
+
+		/* Don't do a long sleep inside a workqueue routine */
+		if (type == HUB_INIT2) {
+			INIT_DELAYED_WORK(&hub->init_work, hub_init_func3);
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->init_work,
+					msecs_to_jiffies(delay));
+			return;		/* Continues at init3: below */
+		} else {
+			msleep(delay);
+		}
+	}
+ init3:
+	hub->quiescing = 0;
+
+	status = usb_submit_urb(hub->urb, GFP_NOIO);
+	if (status < 0)
+		dev_err(hub->intfdev, "activate --> %d\n", status);
+	if (hub->has_indicators && blinkenlights)
+		queue_delayed_work(system_power_efficient_wq,
+				&hub->leds, LED_CYCLE_PERIOD);
+
+	/* Scan all ports that need attention */
+	kick_hub_wq(hub);
+
+	/* Allow autosuspend if it was suppressed */
+	if (type <= HUB_INIT3)
+		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+}
+
+/* Implement the continuations for the delays above */
+static void hub_init_func2(struct work_struct *ws)
+{
+	struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
+
+	hub_activate(hub, HUB_INIT2);
+}
+
+static void hub_init_func3(struct work_struct *ws)
+{
+	struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
+
+	hub_activate(hub, HUB_INIT3);
+}
+
+enum hub_quiescing_type {
+	HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND
+};
+
+static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+{
+	struct usb_device *hdev = hub->hdev;
+	int i;
+
+	cancel_delayed_work_sync(&hub->init_work);
+
+	/* hub_wq and related activity won't re-trigger */
+	hub->quiescing = 1;
+
+	if (type != HUB_SUSPEND) {
+		/* Disconnect all the children */
+		for (i = 0; i < hdev->maxchild; ++i) {
+			if (hub->ports[i]->child)
+				usb_disconnect(&hub->ports[i]->child);
+		}
+	}
+
+	/* Stop hub_wq and related activity */
+	usb_kill_urb(hub->urb);
+	if (hub->has_indicators)
+		cancel_delayed_work_sync(&hub->leds);
+	if (hub->tt.hub)
+		flush_work(&hub->tt.clear_work);
+}
+
+static void hub_pm_barrier_for_all_ports(struct usb_hub *hub)
+{
+	int i;
+
+	for (i = 0; i < hub->hdev->maxchild; ++i)
+		pm_runtime_barrier(&hub->ports[i]->dev);
+}
+
+/* caller has locked the hub device */
+static int hub_pre_reset(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	hub_quiesce(hub, HUB_PRE_RESET);
+	hub->in_reset = 1;
+	hub_pm_barrier_for_all_ports(hub);
+	return 0;
+}
+
+/* caller has locked the hub device */
+static int hub_post_reset(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	hub->in_reset = 0;
+	hub_pm_barrier_for_all_ports(hub);
+	hub_activate(hub, HUB_POST_RESET);
+	return 0;
+}
+
+static int hub_configure(struct usb_hub *hub,
+	struct usb_endpoint_descriptor *endpoint)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *hdev = hub->hdev;
+	struct device *hub_dev = hub->intfdev;
+	u16 hubstatus, hubchange;
+	u16 wHubCharacteristics;
+	unsigned int pipe;
+	int maxp, ret, i;
+	char *message = "out of memory";
+	unsigned unit_load;
+	unsigned full_load;
+	unsigned maxchild;
+
+	hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
+	if (!hub->buffer) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
+	if (!hub->status) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	mutex_init(&hub->status_mutex);
+
+	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
+	if (!hub->descriptor) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* Request the entire hub descriptor.
+	 * hub->descriptor can handle USB_MAXCHILDREN ports,
+	 * but the hub can/will return fewer bytes here.
+	 */
+	ret = get_hub_descriptor(hdev, hub->descriptor);
+	if (ret < 0) {
+		message = "can't read hub descriptor";
+		goto fail;
+	} else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) {
+		message = "hub has too many ports!";
+		ret = -ENODEV;
+		goto fail;
+	} else if (hub->descriptor->bNbrPorts == 0) {
+		message = "hub doesn't have any ports!";
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	maxchild = hub->descriptor->bNbrPorts;
+	dev_info(hub_dev, "%d port%s detected\n", maxchild,
+			(maxchild == 1) ? "" : "s");
+
+	hub->ports = kzalloc(maxchild * sizeof(struct usb_port *), GFP_KERNEL);
+	if (!hub->ports) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+	if (hub_is_superspeed(hdev)) {
+		unit_load = 150;
+		full_load = 900;
+	} else {
+		unit_load = 100;
+		full_load = 500;
+	}
+
+	/* FIXME for USB 3.0, skip for now */
+	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
+			!(hub_is_superspeed(hdev))) {
+		int	i;
+		char	portstr[USB_MAXCHILDREN + 1];
+
+		for (i = 0; i < maxchild; i++)
+			portstr[i] = hub->descriptor->u.hs.DeviceRemovable
+				    [((i + 1) / 8)] & (1 << ((i + 1) % 8))
+				? 'F' : 'R';
+		portstr[maxchild] = 0;
+		dev_dbg(hub_dev, "compound device; port removable status: %s\n", portstr);
+	} else
+		dev_dbg(hub_dev, "standalone hub\n");
+
+	switch (wHubCharacteristics & HUB_CHAR_LPSM) {
+	case HUB_CHAR_COMMON_LPSM:
+		dev_dbg(hub_dev, "ganged power switching\n");
+		break;
+	case HUB_CHAR_INDV_PORT_LPSM:
+		dev_dbg(hub_dev, "individual port power switching\n");
+		break;
+	case HUB_CHAR_NO_LPSM:
+	case HUB_CHAR_LPSM:
+		dev_dbg(hub_dev, "no power switching (usb 1.0)\n");
+		break;
+	}
+
+	switch (wHubCharacteristics & HUB_CHAR_OCPM) {
+	case HUB_CHAR_COMMON_OCPM:
+		dev_dbg(hub_dev, "global over-current protection\n");
+		break;
+	case HUB_CHAR_INDV_PORT_OCPM:
+		dev_dbg(hub_dev, "individual port over-current protection\n");
+		break;
+	case HUB_CHAR_NO_OCPM:
+	case HUB_CHAR_OCPM:
+		dev_dbg(hub_dev, "no over-current protection\n");
+		break;
+	}
+
+	spin_lock_init (&hub->tt.lock);
+	INIT_LIST_HEAD (&hub->tt.clear_list);
+	INIT_WORK(&hub->tt.clear_work, hub_tt_work);
+	switch (hdev->descriptor.bDeviceProtocol) {
+	case USB_HUB_PR_FS:
+		break;
+	case USB_HUB_PR_HS_SINGLE_TT:
+		dev_dbg(hub_dev, "Single TT\n");
+		hub->tt.hub = hdev;
+		break;
+	case USB_HUB_PR_HS_MULTI_TT:
+		ret = usb_set_interface(hdev, 0, 1);
+		if (ret == 0) {
+			dev_dbg(hub_dev, "TT per port\n");
+			hub->tt.multi = 1;
+		} else
+			dev_err(hub_dev, "Using single TT (err %d)\n",
+				ret);
+		hub->tt.hub = hdev;
+		break;
+	case USB_HUB_PR_SS:
+		/* USB 3.0 hubs don't have a TT */
+		break;
+	default:
+		dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
+			hdev->descriptor.bDeviceProtocol);
+		break;
+	}
+
+	/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
+	switch (wHubCharacteristics & HUB_CHAR_TTTT) {
+	case HUB_TTTT_8_BITS:
+		if (hdev->descriptor.bDeviceProtocol != 0) {
+			hub->tt.think_time = 666;
+			dev_dbg(hub_dev, "TT requires at most %d "
+					"FS bit times (%d ns)\n",
+				8, hub->tt.think_time);
+		}
+		break;
+	case HUB_TTTT_16_BITS:
+		hub->tt.think_time = 666 * 2;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			16, hub->tt.think_time);
+		break;
+	case HUB_TTTT_24_BITS:
+		hub->tt.think_time = 666 * 3;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			24, hub->tt.think_time);
+		break;
+	case HUB_TTTT_32_BITS:
+		hub->tt.think_time = 666 * 4;
+		dev_dbg(hub_dev, "TT requires at most %d "
+				"FS bit times (%d ns)\n",
+			32, hub->tt.think_time);
+		break;
+	}
+
+	/* probe() zeroes hub->indicator[] */
+	if (wHubCharacteristics & HUB_CHAR_PORTIND) {
+		hub->has_indicators = 1;
+		dev_dbg(hub_dev, "Port indicators are supported\n");
+	}
+
+	dev_dbg(hub_dev, "power on to power good time: %dms\n",
+		hub->descriptor->bPwrOn2PwrGood * 2);
+
+	/* power budgeting mostly matters with bus-powered hubs,
+	 * and battery-powered root hubs (may provide just 8 mA).
+	 */
+	ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
+	if (ret) {
+		message = "can't get hub status";
+		goto fail;
+	}
+	hcd = bus_to_hcd(hdev->bus);
+	if (hdev == hdev->bus->root_hub) {
+		if (hcd->power_budget > 0)
+			hdev->bus_mA = hcd->power_budget;
+		else
+			hdev->bus_mA = full_load * maxchild;
+		if (hdev->bus_mA >= full_load)
+			hub->mA_per_port = full_load;
+		else {
+			hub->mA_per_port = hdev->bus_mA;
+			hub->limited_power = 1;
+		}
+	} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+		int remaining = hdev->bus_mA -
+			hub->descriptor->bHubContrCurrent;
+
+		dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
+			hub->descriptor->bHubContrCurrent);
+		hub->limited_power = 1;
+
+		if (remaining < maxchild * unit_load)
+			dev_warn(hub_dev,
+					"insufficient power available "
+					"to use all downstream ports\n");
+		hub->mA_per_port = unit_load;	/* 7.2.1 */
+
+	} else {	/* Self-powered external hub */
+		/* FIXME: What about battery-powered external hubs that
+		 * provide less current per port? */
+		hub->mA_per_port = full_load;
+	}
+	if (hub->mA_per_port < full_load)
+		dev_dbg(hub_dev, "%umA bus power budget for each child\n",
+				hub->mA_per_port);
+
+	ret = hub_hub_status(hub, &hubstatus, &hubchange);
+	if (ret < 0) {
+		message = "can't get hub status";
+		goto fail;
+	}
+
+	/* local power status reports aren't always correct */
+	if (hdev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_SELFPOWER)
+		dev_dbg(hub_dev, "local power source is %s\n",
+			(hubstatus & HUB_STATUS_LOCAL_POWER)
+			? "lost (inactive)" : "good");
+
+	if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+		dev_dbg(hub_dev, "%sover-current condition exists\n",
+			(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
+
+	/* set up the interrupt endpoint
+	 * We use the EP's maxpacket size instead of (PORTS+1+7)/8
+	 * bytes as USB2.0[11.12.3] says because some hubs are known
+	 * to send more data (and thus cause overflow). For root hubs,
+	 * maxpktsize is defined in hcd.c's fake endpoint descriptors
+	 * to be big enough for at least USB_MAXCHILDREN ports. */
+	pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
+
+	if (maxp > sizeof(*hub->buffer))
+		maxp = sizeof(*hub->buffer);
+
+	hub->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!hub->urb) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq,
+		hub, endpoint->bInterval);
+
+	/* maybe cycle the hub leds */
+	if (hub->has_indicators && blinkenlights)
+		hub->indicator[0] = INDICATOR_CYCLE;
+
+	mutex_lock(&usb_port_peer_mutex);
+	for (i = 0; i < maxchild; i++) {
+		ret = usb_hub_create_port_device(hub, i + 1);
+		if (ret < 0) {
+			dev_err(hub->intfdev,
+				"couldn't create port%d device.\n", i + 1);
+			break;
+		}
+	}
+	hdev->maxchild = i;
+	for (i = 0; i < hdev->maxchild; i++) {
+		struct usb_port *port_dev = hub->ports[i];
+
+		pm_runtime_put(&port_dev->dev);
+	}
+
+	mutex_unlock(&usb_port_peer_mutex);
+	if (ret < 0)
+		goto fail;
+
+	/* Update the HCD's internal representation of this hub before hub_wq
+	 * starts getting port status changes for devices under the hub.
+	 */
+	if (hcd->driver->update_hub_device) {
+		ret = hcd->driver->update_hub_device(hcd, hdev,
+				&hub->tt, GFP_KERNEL);
+		if (ret < 0) {
+			message = "can't update HCD hub info";
+			goto fail;
+		}
+	}
+
+	usb_hub_adjust_deviceremovable(hdev, hub->descriptor);
+
+	hub_activate(hub, HUB_INIT);
+	return 0;
+
+fail:
+	dev_err (hub_dev, "config failed, %s (err %d)\n",
+			message, ret);
+	/* hub_disconnect() frees urb and descriptor */
+	return ret;
+}
+
+static void hub_release(struct kref *kref)
+{
+	struct usb_hub *hub = container_of(kref, struct usb_hub, kref);
+
+	usb_put_dev(hub->hdev);
+	usb_put_intf(to_usb_interface(hub->intfdev));
+	kfree(hub);
+}
+
+static unsigned highspeed_hubs;
+
+static void hub_disconnect(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+	struct usb_device *hdev = interface_to_usbdev(intf);
+	int port1;
+
+	/*
+	 * Stop adding new hub events. We do not want to block here and thus
+	 * will not try to remove any pending work item.
+	 */
+	hub->disconnected = 1;
+
+	/* Disconnect all children and quiesce the hub */
+	hub->error = 0;
+	hub_quiesce(hub, HUB_DISCONNECT);
+
+	mutex_lock(&usb_port_peer_mutex);
+
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	port1 = hdev->maxchild;
+	hdev->maxchild = 0;
+	usb_set_intfdata(intf, NULL);
+	spin_unlock_irq(&device_state_lock);
+
+	for (; port1 > 0; --port1)
+		usb_hub_remove_port_device(hub, port1);
+
+	mutex_unlock(&usb_port_peer_mutex);
+
+	if (hub->hdev->speed == USB_SPEED_HIGH)
+		highspeed_hubs--;
+
+	usb_free_urb(hub->urb);
+	kfree(hub->ports);
+	kfree(hub->descriptor);
+	kfree(hub->status);
+	kfree(hub->buffer);
+
+	pm_suspend_ignore_children(&intf->dev, false);
+	kref_put(&hub->kref, hub_release);
+}
+
+static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_host_interface *desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *hdev;
+	struct usb_hub *hub;
+
+	desc = intf->cur_altsetting;
+	hdev = interface_to_usbdev(intf);
+
+	/*
+	 * Set default autosuspend delay as 0 to speedup bus suspend,
+	 * based on the below considerations:
+	 *
+	 * - Unlike other drivers, the hub driver does not rely on the
+	 *   autosuspend delay to provide enough time to handle a wakeup
+	 *   event, and the submitted status URB is just to check future
+	 *   change on hub downstream ports, so it is safe to do it.
+	 *
+	 * - The patch might cause one or more auto supend/resume for
+	 *   below very rare devices when they are plugged into hub
+	 *   first time:
+	 *
+	 *   	devices having trouble initializing, and disconnect
+	 *   	themselves from the bus and then reconnect a second
+	 *   	or so later
+	 *
+	 *   	devices just for downloading firmware, and disconnects
+	 *   	themselves after completing it
+	 *
+	 *   For these quite rare devices, their drivers may change the
+	 *   autosuspend delay of their parent hub in the probe() to one
+	 *   appropriate value to avoid the subtle problem if someone
+	 *   does care it.
+	 *
+	 * - The patch may cause one or more auto suspend/resume on
+	 *   hub during running 'lsusb', but it is probably too
+	 *   infrequent to worry about.
+	 *
+	 * - Change autosuspend delay of hub can avoid unnecessary auto
+	 *   suspend timer for hub, also may decrease power consumption
+	 *   of USB bus.
+	 *
+	 * - If user has indicated to prevent autosuspend by passing
+	 *   usbcore.autosuspend = -1 then keep autosuspend disabled.
+	 */
+#ifdef CONFIG_PM
+	if (hdev->dev.power.autosuspend_delay >= 0)
+		pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+#endif
+
+	/*
+	 * Hubs have proper suspend/resume support, except for root hubs
+	 * where the controller driver doesn't have bus_suspend and
+	 * bus_resume methods.
+	 */
+	if (hdev->parent) {		/* normal device */
+		usb_enable_autosuspend(hdev);
+	} else {			/* root hub */
+		const struct hc_driver *drv = bus_to_hcd(hdev->bus)->driver;
+
+		if (drv->bus_suspend && drv->bus_resume)
+			usb_enable_autosuspend(hdev);
+	}
+
+	if (hdev->level == MAX_TOPO_LEVEL) {
+		dev_err(&intf->dev,
+			"Unsupported bus topology: hub nested too deep\n");
+		return -E2BIG;
+	}
+
+#ifdef	CONFIG_USB_OTG_BLACKLIST_HUB
+	if (hdev->parent) {
+		dev_warn(&intf->dev, "ignoring external hub\n");
+		return -ENODEV;
+	}
+#endif
+
+	/* Some hubs have a subclass of 1, which AFAICT according to the */
+	/*  specs is not defined, but it works */
+	if ((desc->desc.bInterfaceSubClass != 0) &&
+	    (desc->desc.bInterfaceSubClass != 1)) {
+descriptor_error:
+		dev_err (&intf->dev, "bad descriptor, ignoring hub\n");
+		return -EIO;
+	}
+
+	/* Multiple endpoints? What kind of mutant ninja-hub is this? */
+	if (desc->desc.bNumEndpoints != 1)
+		goto descriptor_error;
+
+	endpoint = &desc->endpoint[0].desc;
+
+	/* If it's not an interrupt in endpoint, we'd better punt! */
+	if (!usb_endpoint_is_int_in(endpoint))
+		goto descriptor_error;
+
+	/* We found a hub */
+	dev_info (&intf->dev, "USB hub found\n");
+
+	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
+	if (!hub) {
+		dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
+		return -ENOMEM;
+	}
+
+	kref_init(&hub->kref);
+	hub->intfdev = &intf->dev;
+	hub->hdev = hdev;
+	INIT_DELAYED_WORK(&hub->leds, led_work);
+	INIT_DELAYED_WORK(&hub->init_work, NULL);
+	INIT_WORK(&hub->events, hub_event);
+	usb_get_intf(intf);
+	usb_get_dev(hdev);
+
+	usb_set_intfdata (intf, hub);
+	intf->needs_remote_wakeup = 1;
+	pm_suspend_ignore_children(&intf->dev, true);
+
+	if (hdev->speed == USB_SPEED_HIGH)
+		highspeed_hubs++;
+
+	if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+		hub->quirk_check_port_auto_suspend = 1;
+
+	if (hub_configure(hub, endpoint) >= 0)
+		return 0;
+
+	hub_disconnect (intf);
+	return -ENODEV;
+}
+
+static int
+hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data)
+{
+	struct usb_device *hdev = interface_to_usbdev (intf);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	/* assert ifno == 0 (part of hub spec) */
+	switch (code) {
+	case USBDEVFS_HUB_PORTINFO: {
+		struct usbdevfs_hub_portinfo *info = user_data;
+		int i;
+
+		spin_lock_irq(&device_state_lock);
+		if (hdev->devnum <= 0)
+			info->nports = 0;
+		else {
+			info->nports = hdev->maxchild;
+			for (i = 0; i < info->nports; i++) {
+				if (hub->ports[i]->child == NULL)
+					info->port[i] = 0;
+				else
+					info->port[i] =
+						hub->ports[i]->child->devnum;
+			}
+		}
+		spin_unlock_irq(&device_state_lock);
+
+		return info->nports + 1;
+		}
+
+	default:
+		return -ENOSYS;
+	}
+}
+
+/*
+ * Allow user programs to claim ports on a hub.  When a device is attached
+ * to one of these "claimed" ports, the program will "own" the device.
+ */
+static int find_port_owner(struct usb_device *hdev, unsigned port1,
+		struct usb_dev_state ***ppowner)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (hdev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+	if (port1 == 0 || port1 > hdev->maxchild)
+		return -EINVAL;
+
+	/* Devices not managed by the hub driver
+	 * will always have maxchild equal to 0.
+	 */
+	*ppowner = &(hub->ports[port1 - 1]->port_owner);
+	return 0;
+}
+
+/* In the following three functions, the caller must hold hdev's lock */
+int usb_hub_claim_port(struct usb_device *hdev, unsigned port1,
+		       struct usb_dev_state *owner)
+{
+	int rc;
+	struct usb_dev_state **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner)
+		return -EBUSY;
+	*powner = owner;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hub_claim_port);
+
+int usb_hub_release_port(struct usb_device *hdev, unsigned port1,
+			 struct usb_dev_state *owner)
+{
+	int rc;
+	struct usb_dev_state **powner;
+
+	rc = find_port_owner(hdev, port1, &powner);
+	if (rc)
+		return rc;
+	if (*powner != owner)
+		return -ENOENT;
+	*powner = NULL;
+	return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hub_release_port);
+
+void usb_hub_release_all_ports(struct usb_device *hdev, struct usb_dev_state *owner)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	int n;
+
+	for (n = 0; n < hdev->maxchild; n++) {
+		if (hub->ports[n]->port_owner == owner)
+			hub->ports[n]->port_owner = NULL;
+	}
+
+}
+
+/* The caller must hold udev's lock */
+bool usb_device_is_owned(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+
+	if (udev->state == USB_STATE_NOTATTACHED || !udev->parent)
+		return false;
+	hub = usb_hub_to_struct_hub(udev->parent);
+	return !!hub->ports[udev->portnum - 1]->port_owner;
+}
+
+static void recursively_mark_NOTATTACHED(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+	int i;
+
+	for (i = 0; i < udev->maxchild; ++i) {
+		if (hub->ports[i]->child)
+			recursively_mark_NOTATTACHED(hub->ports[i]->child);
+	}
+	if (udev->state == USB_STATE_SUSPENDED)
+		udev->active_duration -= jiffies;
+	udev->state = USB_STATE_NOTATTACHED;
+}
+
+/**
+ * usb_set_device_state - change a device's current state (usbcore, hcds)
+ * @udev: pointer to device whose state should be changed
+ * @new_state: new state value to be stored
+ *
+ * udev->state is _not_ fully protected by the device lock.  Although
+ * most transitions are made only while holding the lock, the state can
+ * can change to USB_STATE_NOTATTACHED at almost any time.  This
+ * is so that devices can be marked as disconnected as soon as possible,
+ * without having to wait for any semaphores to be released.  As a result,
+ * all changes to any device's state must be protected by the
+ * device_state_lock spinlock.
+ *
+ * Once a device has been added to the device tree, all changes to its state
+ * should be made using this routine.  The state should _not_ be set directly.
+ *
+ * If udev->state is already USB_STATE_NOTATTACHED then no change is made.
+ * Otherwise udev->state is set to new_state, and if new_state is
+ * USB_STATE_NOTATTACHED then all of udev's descendants' states are also set
+ * to USB_STATE_NOTATTACHED.
+ */
+void usb_set_device_state(struct usb_device *udev,
+		enum usb_device_state new_state)
+{
+	unsigned long flags;
+	int wakeup = -1;
+
+	spin_lock_irqsave(&device_state_lock, flags);
+	if (udev->state == USB_STATE_NOTATTACHED)
+		;	/* do nothing */
+	else if (new_state != USB_STATE_NOTATTACHED) {
+
+		/* root hub wakeup capabilities are managed out-of-band
+		 * and may involve silicon errata ... ignore them here.
+		 */
+		if (udev->parent) {
+			if (udev->state == USB_STATE_SUSPENDED
+					|| new_state == USB_STATE_SUSPENDED)
+				;	/* No change to wakeup settings */
+			else if (new_state == USB_STATE_CONFIGURED)
+				wakeup = (udev->quirks &
+					USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+					udev->actconfig->desc.bmAttributes &
+					USB_CONFIG_ATT_WAKEUP;
+			else
+				wakeup = 0;
+		}
+		if (udev->state == USB_STATE_SUSPENDED &&
+			new_state != USB_STATE_SUSPENDED)
+			udev->active_duration -= jiffies;
+		else if (new_state == USB_STATE_SUSPENDED &&
+				udev->state != USB_STATE_SUSPENDED)
+			udev->active_duration += jiffies;
+		udev->state = new_state;
+	} else
+		recursively_mark_NOTATTACHED(udev);
+	spin_unlock_irqrestore(&device_state_lock, flags);
+	if (wakeup >= 0)
+		device_set_wakeup_capable(&udev->dev, wakeup);
+}
+EXPORT_SYMBOL_GPL(usb_set_device_state);
+
+/*
+ * Choose a device number.
+ *
+ * Device numbers are used as filenames in usbfs.  On USB-1.1 and
+ * USB-2.0 buses they are also used as device addresses, however on
+ * USB-3.0 buses the address is assigned by the controller hardware
+ * and it usually is not the same as the device number.
+ *
+ * WUSB devices are simple: they have no hubs behind, so the mapping
+ * device <-> virtual port number becomes 1:1. Why? to simplify the
+ * life of the device connection logic in
+ * drivers/usb/wusbcore/devconnect.c. When we do the initial secret
+ * handshake we need to assign a temporary address in the unauthorized
+ * space. For simplicity we use the first virtual port number found to
+ * be free [drivers/usb/wusbcore/devconnect.c:wusbhc_devconnect_ack()]
+ * and that becomes it's address [X < 128] or its unauthorized address
+ * [X | 0x80].
+ *
+ * We add 1 as an offset to the one-based USB-stack port number
+ * (zero-based wusb virtual port index) for two reasons: (a) dev addr
+ * 0 is reserved by USB for default address; (b) Linux's USB stack
+ * uses always #1 for the root hub of the controller. So USB stack's
+ * port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple.  The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
+ */
+static void choose_devnum(struct usb_device *udev)
+{
+	int		devnum;
+	struct usb_bus	*bus = udev->bus;
+
+	/* be safe when more hub events are proceed in parallel */
+	mutex_lock(&bus->usb_address0_mutex);
+	if (udev->wusb) {
+		devnum = udev->portnum + 1;
+		BUG_ON(test_bit(devnum, bus->devmap.devicemap));
+	} else {
+		/* Try to allocate the next devnum beginning at
+		 * bus->devnum_next. */
+		devnum = find_next_zero_bit(bus->devmap.devicemap, 128,
+					    bus->devnum_next);
+		if (devnum >= 128)
+			devnum = find_next_zero_bit(bus->devmap.devicemap,
+						    128, 1);
+		bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
+	}
+	if (devnum < 128) {
+		set_bit(devnum, bus->devmap.devicemap);
+		udev->devnum = devnum;
+	}
+	mutex_unlock(&bus->usb_address0_mutex);
+}
+
+static void release_devnum(struct usb_device *udev)
+{
+	if (udev->devnum > 0) {
+		clear_bit(udev->devnum, udev->bus->devmap.devicemap);
+		udev->devnum = -1;
+	}
+}
+
+static void update_devnum(struct usb_device *udev, int devnum)
+{
+	/* The address for a WUSB device is managed by wusbcore. */
+	if (!udev->wusb)
+		udev->devnum = devnum;
+}
+
+static void hub_free_dev(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Root hubs aren't real devices, so don't free HCD resources */
+	if (hcd->driver->free_dev && udev->parent)
+		hcd->driver->free_dev(hcd, udev);
+}
+
+static void hub_disconnect_children(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+	int i;
+
+	/* Free up all the children before we remove this device */
+	for (i = 0; i < udev->maxchild; i++) {
+		if (hub->ports[i]->child)
+			usb_disconnect(&hub->ports[i]->child);
+	}
+}
+
+/**
+ * usb_disconnect - disconnect a device (usbcore-internal)
+ * @pdev: pointer to device being disconnected
+ * Context: !in_interrupt ()
+ *
+ * Something got disconnected. Get rid of it and all of its children.
+ *
+ * If *pdev is a normal device then the parent hub must already be locked.
+ * If *pdev is a root hub then the caller must hold the usb_bus_list_lock,
+ * which protects the set of root hubs as well as the list of buses.
+ *
+ * Only hub drivers (including virtual root hub drivers for host
+ * controllers) should ever call this.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ */
+void usb_disconnect(struct usb_device **pdev)
+{
+	struct usb_port *port_dev = NULL;
+	struct usb_device *udev = *pdev;
+	struct usb_hub *hub = NULL;
+	int port1 = 1;
+
+	/* mark the device as inactive, so any further urb submissions for
+	 * this device (and any of its children) will fail immediately.
+	 * this quiesces everything except pending urbs.
+	 */
+	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	dev_info(&udev->dev, "USB disconnect, device number %d\n",
+			udev->devnum);
+
+	usb_lock_device(udev);
+
+	hub_disconnect_children(udev);
+
+	/* deallocate hcd/hardware state ... nuking all pending urbs and
+	 * cleaning up all state associated with the current configuration
+	 * so that the hardware is now fully quiesced.
+	 */
+	dev_dbg (&udev->dev, "unregistering device\n");
+	usb_disable_device(udev, 0);
+	usb_hcd_synchronize_unlinks(udev);
+
+	if (udev->parent) {
+		port1 = udev->portnum;
+		hub = usb_hub_to_struct_hub(udev->parent);
+		port_dev = hub->ports[port1 - 1];
+
+		sysfs_remove_link(&udev->dev.kobj, "port");
+		sysfs_remove_link(&port_dev->dev.kobj, "device");
+
+		/*
+		 * As usb_port_runtime_resume() de-references udev, make
+		 * sure no resumes occur during removal
+		 */
+		if (!test_and_set_bit(port1, hub->child_usage_bits))
+			pm_runtime_get_sync(&port_dev->dev);
+	}
+
+	usb_remove_ep_devs(&udev->ep0);
+	usb_unlock_device(udev);
+
+	/* Unregister the device.  The device driver is responsible
+	 * for de-configuring the device and invoking the remove-device
+	 * notifier chain (used by usbfs and possibly others).
+	 */
+	device_del(&udev->dev);
+
+	/* Free the device number and delete the parent's children[]
+	 * (or root_hub) pointer.
+	 */
+	release_devnum(udev);
+
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	*pdev = NULL;
+	spin_unlock_irq(&device_state_lock);
+
+	if (port_dev && test_and_clear_bit(port1, hub->child_usage_bits))
+		pm_runtime_put(&port_dev->dev);
+
+	hub_free_dev(udev);
+
+	put_device(&udev->dev);
+}
+
+#ifdef CONFIG_USB_ANNOUNCE_NEW_DEVICES
+static void show_string(struct usb_device *udev, char *id, char *string)
+{
+	if (!string)
+		return;
+	dev_info(&udev->dev, "%s: %s\n", id, string);
+}
+
+static void announce_device(struct usb_device *udev)
+{
+	dev_info(&udev->dev, "New USB device found, idVendor=%04x, idProduct=%04x\n",
+		le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct));
+	dev_info(&udev->dev,
+		"New USB device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
+		udev->descriptor.iManufacturer,
+		udev->descriptor.iProduct,
+		udev->descriptor.iSerialNumber);
+	show_string(udev, "Product", udev->product);
+	show_string(udev, "Manufacturer", udev->manufacturer);
+	show_string(udev, "SerialNumber", udev->serial);
+}
+#else
+static inline void announce_device(struct usb_device *udev) { }
+#endif
+
+
+/**
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * Finish enumeration for On-The-Go devices
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_enumerate_device_otg(struct usb_device *udev)
+{
+	int err = 0;
+
+#ifdef	CONFIG_USB_OTG
+	/*
+	 * OTG-aware devices on OTG-capable root hubs may be able to use SRP,
+	 * to wake us after we've powered off VBUS; and HNP, switching roles
+	 * "host" to "peripheral".  The OTG descriptor helps figure this out.
+	 */
+	if (!udev->bus->is_b_host
+			&& udev->config
+			&& udev->parent == udev->bus->root_hub) {
+		struct usb_otg_descriptor	*desc = NULL;
+		struct usb_bus			*bus = udev->bus;
+
+		/* descriptor may appear anywhere in config */
+		if (__usb_get_extra_descriptor (udev->rawdescriptors[0],
+					le16_to_cpu(udev->config[0].desc.wTotalLength),
+					USB_DT_OTG, (void **) &desc) == 0) {
+			if (desc->bmAttributes & USB_OTG_HNP) {
+				unsigned		port1 = udev->portnum;
+
+				dev_info(&udev->dev,
+					"Dual-Role OTG device on %sHNP port\n",
+					(port1 == bus->otg_port)
+						? "" : "non-");
+
+				/* enable HNP before suspend, it's simpler */
+				if (port1 == bus->otg_port)
+					bus->b_hnp_enable = 1;
+				err = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, 0,
+					bus->b_hnp_enable
+						? USB_DEVICE_B_HNP_ENABLE
+						: USB_DEVICE_A_ALT_HNP_SUPPORT,
+					0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+				if (err < 0) {
+					/* OTG MESSAGE: report errors here,
+					 * customize to match your product.
+					 */
+					dev_info(&udev->dev,
+						"can't set HNP mode: %d\n",
+						err);
+					bus->b_hnp_enable = 0;
+				}
+			}
+		}
+	}
+#endif
+	return err;
+}
+
+
+/**
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is only called by usb_new_device() and usb_authorize_device()
+ * and FIXME -- all comments that apply to them apply here wrt to
+ * environment.
+ *
+ * If the device is WUSB and not authorized, we don't attempt to read
+ * the string descriptors, as they will be errored out by the device
+ * until it has been authorized.
+ *
+ * Return: 0 if successful. A negative error code otherwise.
+ */
+static int usb_enumerate_device(struct usb_device *udev)
+{
+	int err;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (udev->config == NULL) {
+		err = usb_get_configuration(udev);
+		if (err < 0) {
+			if (err != -ENODEV)
+				dev_err(&udev->dev, "can't read configurations, error %d\n",
+						err);
+			return err;
+		}
+	}
+
+	/* read the standard strings and cache them if present */
+	udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+	udev->manufacturer = usb_cache_string(udev,
+					      udev->descriptor.iManufacturer);
+	udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
+	err = usb_enumerate_device_otg(udev);
+	if (err < 0)
+		return err;
+
+	if (IS_ENABLED(CONFIG_USB_OTG_WHITELIST) && hcd->tpl_support &&
+		!is_targeted(udev)) {
+		/* Maybe it can talk to us, though we can't talk to it.
+		 * (Includes HNP test device.)
+		 */
+		if (IS_ENABLED(CONFIG_USB_OTG) && (udev->bus->b_hnp_enable
+			|| udev->bus->is_b_host)) {
+			err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND);
+			if (err < 0)
+				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+		}
+		return -ENOTSUPP;
+	}
+
+	usb_detect_interface_quirks(udev);
+
+	return 0;
+}
+
+static void set_usb_port_removable(struct usb_device *udev)
+{
+	struct usb_device *hdev = udev->parent;
+	struct usb_hub *hub;
+	u8 port = udev->portnum;
+	u16 wHubCharacteristics;
+	bool removable = true;
+
+	if (!hdev)
+		return;
+
+	hub = usb_hub_to_struct_hub(udev->parent);
+
+	/*
+	 * If the platform firmware has provided information about a port,
+	 * use that to determine whether it's removable.
+	 */
+	switch (hub->ports[udev->portnum - 1]->connect_type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		udev->removable = USB_DEVICE_REMOVABLE;
+		return;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+	case USB_PORT_NOT_USED:
+		udev->removable = USB_DEVICE_FIXED;
+		return;
+	default:
+		break;
+	}
+
+	/*
+	 * Otherwise, check whether the hub knows whether a port is removable
+	 * or not
+	 */
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+	if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+		return;
+
+	if (hub_is_superspeed(hdev)) {
+		if (le16_to_cpu(hub->descriptor->u.ss.DeviceRemovable)
+				& (1 << port))
+			removable = false;
+	} else {
+		if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+			removable = false;
+	}
+
+	if (removable)
+		udev->removable = USB_DEVICE_REMOVABLE;
+	else
+		udev->removable = USB_DEVICE_FIXED;
+
+}
+
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been detected but not fully
+ * enumerated.  The device descriptor is available, but not descriptors
+ * for any device configuration.  The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ *
+ * Return: Whether the device is configured properly or not. Zero if the
+ * interface was registered with the driver core; else a negative errno
+ * value.
+ *
+ */
+int usb_new_device(struct usb_device *udev)
+{
+	int err;
+
+	if (udev->parent) {
+		/* Initialize non-root-hub device wakeup to disabled;
+		 * device (un)configuration controls wakeup capable
+		 * sysfs power/wakeup controls wakeup enabled/disabled
+		 */
+		device_init_wakeup(&udev->dev, 0);
+	}
+
+	/* Tell the runtime-PM framework the device is active */
+	pm_runtime_set_active(&udev->dev);
+	pm_runtime_get_noresume(&udev->dev);
+	pm_runtime_use_autosuspend(&udev->dev);
+	pm_runtime_enable(&udev->dev);
+
+	/* By default, forbid autosuspend for all devices.  It will be
+	 * allowed for hubs during binding.
+	 */
+	usb_disable_autosuspend(udev);
+
+	err = usb_enumerate_device(udev);	/* Read descriptors */
+	if (err < 0)
+		goto fail;
+	dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+			udev->devnum, udev->bus->busnum,
+			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+	/* export the usbdev device-node for libusb */
+	udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
+			(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+
+	/* Tell the world! */
+	announce_device(udev);
+
+	if (udev->serial)
+		add_device_randomness(udev->serial, strlen(udev->serial));
+	if (udev->product)
+		add_device_randomness(udev->product, strlen(udev->product));
+	if (udev->manufacturer)
+		add_device_randomness(udev->manufacturer,
+				      strlen(udev->manufacturer));
+
+	device_enable_async_suspend(&udev->dev);
+
+	/* check whether the hub or firmware marks this port as non-removable */
+	if (udev->parent)
+		set_usb_port_removable(udev);
+
+	/* Register the device.  The device driver is responsible
+	 * for configuring the device and invoking the add-device
+	 * notifier chain (used by usbfs and possibly others).
+	 */
+	err = device_add(&udev->dev);
+	if (err) {
+		dev_err(&udev->dev, "can't device_add, error %d\n", err);
+		goto fail;
+	}
+
+	/* Create link files between child device and usb port device. */
+	if (udev->parent) {
+		struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+		int port1 = udev->portnum;
+		struct usb_port	*port_dev = hub->ports[port1 - 1];
+
+		err = sysfs_create_link(&udev->dev.kobj,
+				&port_dev->dev.kobj, "port");
+		if (err)
+			goto fail;
+
+		err = sysfs_create_link(&port_dev->dev.kobj,
+				&udev->dev.kobj, "device");
+		if (err) {
+			sysfs_remove_link(&udev->dev.kobj, "port");
+			goto fail;
+		}
+
+		if (!test_and_set_bit(port1, hub->child_usage_bits))
+			pm_runtime_get_sync(&port_dev->dev);
+	}
+
+	(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
+	usb_mark_last_busy(udev);
+	pm_runtime_put_sync_autosuspend(&udev->dev);
+	return err;
+
+fail:
+	usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	pm_runtime_disable(&udev->dev);
+	pm_runtime_set_suspended(&udev->dev);
+	return err;
+}
+
+
+/**
+ * usb_deauthorize_device - deauthorize a device (usbcore-internal)
+ * @usb_dev: USB device
+ *
+ * Move the USB device to a very basic state where interfaces are disabled
+ * and the device is in fact unconfigured and unusable.
+ *
+ * We share a lock (that we have) with device_del(), so we need to
+ * defer its call.
+ *
+ * Return: 0.
+ */
+int usb_deauthorize_device(struct usb_device *usb_dev)
+{
+	usb_lock_device(usb_dev);
+	if (usb_dev->authorized == 0)
+		goto out_unauthorized;
+
+	usb_dev->authorized = 0;
+	usb_set_configuration(usb_dev, -1);
+
+out_unauthorized:
+	usb_unlock_device(usb_dev);
+	return 0;
+}
+
+
+int usb_authorize_device(struct usb_device *usb_dev)
+{
+	int result = 0, c;
+
+	usb_lock_device(usb_dev);
+	if (usb_dev->authorized == 1)
+		goto out_authorized;
+
+	result = usb_autoresume_device(usb_dev);
+	if (result < 0) {
+		dev_err(&usb_dev->dev,
+			"can't autoresume for authorization: %d\n", result);
+		goto error_autoresume;
+	}
+
+	if (usb_dev->wusb) {
+		result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor));
+		if (result < 0) {
+			dev_err(&usb_dev->dev, "can't re-read device descriptor for "
+				"authorization: %d\n", result);
+			goto error_device_descriptor;
+		}
+	}
+
+	usb_dev->authorized = 1;
+	/* Choose and set the configuration.  This registers the interfaces
+	 * with the driver core and lets interface drivers bind to them.
+	 */
+	c = usb_choose_configuration(usb_dev);
+	if (c >= 0) {
+		result = usb_set_configuration(usb_dev, c);
+		if (result) {
+			dev_err(&usb_dev->dev,
+				"can't set config #%d, error %d\n", c, result);
+			/* This need not be fatal.  The user can try to
+			 * set other configurations. */
+		}
+	}
+	dev_info(&usb_dev->dev, "authorized to connect\n");
+
+error_device_descriptor:
+	usb_autosuspend_device(usb_dev);
+error_autoresume:
+out_authorized:
+	usb_unlock_device(usb_dev);	/* complements locktree */
+	return result;
+}
+
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+	struct usb_hcd *hcd;
+	if (hub->hdev->parent != NULL)  /* not a root hub? */
+		return 0;
+	hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
+	return hcd->wireless;
+}
+
+
+#define PORT_RESET_TRIES	5
+#define SET_ADDRESS_TRIES	2
+#define GET_DESCRIPTOR_TRIES	2
+#define SET_CONFIG_TRIES	(2 * (use_both_schemes + 1))
+#define USE_NEW_SCHEME(i)	((i) / 2 == (int)old_scheme_first)
+
+#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_BH_RESET_TIME	50
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	800
+
+/*
+ * "New scheme" enumeration causes an extra state transition to be
+ * exposed to an xhci host and causes USB3 devices to receive control
+ * commands in the default state.  This has been seen to cause
+ * enumeration failures, so disable this enumeration scheme for USB3
+ * devices.
+ */
+static bool use_new_scheme(struct usb_device *udev, int retry)
+{
+	if (udev->speed == USB_SPEED_SUPER)
+		return false;
+
+	return USE_NEW_SCHEME(retry);
+}
+
+/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
+		u16 portstatus)
+{
+	u16 link_state;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return false;
+
+	if (test_bit(port1, hub->warm_reset_bits))
+		return true;
+
+	link_state = portstatus & USB_PORT_STAT_LINK_STATE;
+	return link_state == USB_SS_PORT_LS_SS_INACTIVE
+		|| link_state == USB_SS_PORT_LS_COMP_MOD;
+}
+
+static int hub_port_wait_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, unsigned int delay, bool warm)
+{
+	int delay_time, ret;
+	u16 portstatus;
+	u16 portchange;
+
+	for (delay_time = 0;
+			delay_time < HUB_RESET_TIMEOUT;
+			delay_time += delay) {
+		/* wait to give the device a chance to reset */
+		msleep(delay);
+
+		/* read and decode port status */
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		/* The port state is unknown until the reset completes. */
+		if (!(portstatus & USB_PORT_STAT_RESET))
+			break;
+
+		/* switch to the long delay after two short delay failures */
+		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
+			delay = HUB_LONG_RESET_TIME;
+
+		dev_dbg(&hub->ports[port1 - 1]->dev,
+				"not %sreset yet, waiting %dms\n",
+				warm ? "warm " : "", delay);
+	}
+
+	if ((portstatus & USB_PORT_STAT_RESET))
+		return -EBUSY;
+
+	if (hub_port_warm_reset_required(hub, port1, portstatus))
+		return -ENOTCONN;
+
+	/* Device went away? */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION))
+		return -ENOTCONN;
+
+	/* bomb out completely if the connection bounced.  A USB 3.0
+	 * connection may bounce if multiple warm resets were issued,
+	 * but the device may have successfully re-connected. Ignore it.
+	 */
+	if (!hub_is_superspeed(hub->hdev) &&
+			(portchange & USB_PORT_STAT_C_CONNECTION))
+		return -ENOTCONN;
+
+	if (!(portstatus & USB_PORT_STAT_ENABLE))
+		return -EBUSY;
+
+	if (!udev)
+		return 0;
+
+	if (hub_is_wusb(hub))
+		udev->speed = USB_SPEED_WIRELESS;
+	else if (hub_is_superspeed(hub->hdev))
+		udev->speed = USB_SPEED_SUPER;
+	else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+		udev->speed = USB_SPEED_HIGH;
+	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+		udev->speed = USB_SPEED_LOW;
+	else
+		udev->speed = USB_SPEED_FULL;
+	return 0;
+}
+
+/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
+static int hub_port_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, unsigned int delay, bool warm)
+{
+	int i, status;
+	u16 portchange, portstatus;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+
+	if (!hub_is_superspeed(hub->hdev)) {
+		if (warm) {
+			dev_err(hub->intfdev, "only USB3 hub support "
+						"warm reset\n");
+			return -EINVAL;
+		}
+		/* Block EHCI CF initialization during the port reset.
+		 * Some companion controllers don't like it when they mix.
+		 */
+		down_read(&ehci_cf_port_reset_rwsem);
+	} else if (!warm) {
+		/*
+		 * If the caller hasn't explicitly requested a warm reset,
+		 * double check and see if one is needed.
+		 */
+		if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
+			if (hub_port_warm_reset_required(hub, port1,
+							portstatus))
+				warm = true;
+	}
+	clear_bit(port1, hub->warm_reset_bits);
+
+	/* Reset the port */
+	for (i = 0; i < PORT_RESET_TRIES; i++) {
+		status = set_port_feature(hub->hdev, port1, (warm ?
+					USB_PORT_FEAT_BH_PORT_RESET :
+					USB_PORT_FEAT_RESET));
+		if (status == -ENODEV) {
+			;	/* The hub is gone */
+		} else if (status) {
+			dev_err(&port_dev->dev,
+					"cannot %sreset (err = %d)\n",
+					warm ? "warm " : "", status);
+		} else {
+			status = hub_port_wait_reset(hub, port1, udev, delay,
+								warm);
+			if (status && status != -ENOTCONN && status != -ENODEV)
+				dev_dbg(hub->intfdev,
+						"port_wait_reset: err = %d\n",
+						status);
+		}
+
+		/* Check for disconnect or reset */
+		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+
+			if (!hub_is_superspeed(hub->hdev))
+				goto done;
+
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+
+			/*
+			 * If a USB 3.0 device migrates from reset to an error
+			 * state, re-issue the warm reset.
+			 */
+			if (hub_port_status(hub, port1,
+					&portstatus, &portchange) < 0)
+				goto done;
+
+			if (!hub_port_warm_reset_required(hub, port1,
+					portstatus))
+				goto done;
+
+			/*
+			 * If the port is in SS.Inactive or Compliance Mode, the
+			 * hot or warm reset failed.  Try another warm reset.
+			 */
+			if (!warm) {
+				dev_dbg(&port_dev->dev,
+						"hot reset failed, warm reset\n");
+				warm = true;
+			}
+		}
+
+		dev_dbg(&port_dev->dev,
+				"not enabled, trying %sreset again...\n",
+				warm ? "warm " : "");
+		delay = HUB_LONG_RESET_TIME;
+	}
+
+	dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
+
+done:
+	if (status == 0) {
+		/* TRSTRCY = 10 ms; plus some extra */
+		msleep(10 + 40);
+		if (udev) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+			update_devnum(udev, 0);
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
+
+			usb_set_device_state(udev, USB_STATE_DEFAULT);
+		}
+	} else {
+		if (udev)
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	}
+
+	if (!hub_is_superspeed(hub->hdev))
+		up_read(&ehci_cf_port_reset_rwsem);
+
+	return status;
+}
+
+/* Check if a port is power on */
+static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if (portstatus & USB_SS_PORT_STAT_POWER)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_POWER)
+			ret = 1;
+	}
+
+	return ret;
+}
+
+static void usb_lock_port(struct usb_port *port_dev)
+		__acquires(&port_dev->status_lock)
+{
+	mutex_lock(&port_dev->status_lock);
+	__acquire(&port_dev->status_lock);
+}
+
+static void usb_unlock_port(struct usb_port *port_dev)
+		__releases(&port_dev->status_lock)
+{
+	mutex_unlock(&port_dev->status_lock);
+	__release(&port_dev->status_lock);
+}
+
+#ifdef	CONFIG_PM
+
+/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
+static int port_is_suspended(struct usb_hub *hub, unsigned portstatus)
+{
+	int ret = 0;
+
+	if (hub_is_superspeed(hub->hdev)) {
+		if ((portstatus & USB_PORT_STAT_LINK_STATE)
+				== USB_SS_PORT_LS_U3)
+			ret = 1;
+	} else {
+		if (portstatus & USB_PORT_STAT_SUSPEND)
+			ret = 1;
+	}
+
+	return ret;
+}
+
+/* Determine whether the device on a port is ready for a normal resume,
+ * is ready for a reset-resume, or should be disconnected.
+ */
+static int check_port_resume_type(struct usb_device *udev,
+		struct usb_hub *hub, int port1,
+		int status, u16 portchange, u16 portstatus)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	int retries = 3;
+
+ retry:
+	/* Is a warm reset needed to recover the connection? */
+	if (status == 0 && udev->reset_resume
+		&& hub_port_warm_reset_required(hub, port1, portstatus)) {
+		/* pass */;
+	}
+	/* Is the device still present? */
+	else if (status || port_is_suspended(hub, portstatus) ||
+			!port_is_power_on(hub, portstatus)) {
+		if (status >= 0)
+			status = -ENODEV;
+	} else if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
+		if (retries--) {
+			usleep_range(200, 300);
+			status = hub_port_status(hub, port1, &portstatus,
+							     &portchange);
+			goto retry;
+		}
+		status = -ENODEV;
+	}
+
+	/* Can't do a normal resume if the port isn't enabled,
+	 * so try a reset-resume instead.
+	 */
+	else if (!(portstatus & USB_PORT_STAT_ENABLE) && !udev->reset_resume) {
+		if (udev->persist_enabled)
+			udev->reset_resume = 1;
+		else
+			status = -ENODEV;
+	}
+
+	if (status) {
+		dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n",
+				portchange, portstatus, status);
+	} else if (udev->reset_resume) {
+
+		/* Late port handoff can set status-change bits */
+		if (portchange & USB_PORT_STAT_C_CONNECTION)
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		if (portchange & USB_PORT_STAT_C_ENABLE)
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_ENABLE);
+	}
+
+	return status;
+}
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return 0;
+
+	/* Clear Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return 0;
+
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/* Check if the roothub and device supports LTM. */
+	if (!usb_device_supports_ltm(hcd->self.root_hub) ||
+			!usb_device_supports_ltm(udev))
+		return;
+
+	/* Set Feature LTM Enable can only be sent if the device is
+	 * configured.
+	 */
+	if (!udev->actconfig)
+		return;
+
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
+			USB_CTRL_SET_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
+/*
+ * usb_enable_remote_wakeup - enable remote wakeup for a device
+ * @udev: target device
+ *
+ * For USB-2 devices: Set the device's remote wakeup feature.
+ *
+ * For USB-3 devices: Assume there's only one function on the device and
+ * enable remote wake for the first interface.  FIXME if the interface
+ * association descriptor shows there's more than one function.
+ */
+static int usb_enable_remote_wakeup(struct usb_device *udev)
+{
+	if (udev->speed < USB_SPEED_SUPER)
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	else
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+				USB_INTRF_FUNC_SUSPEND,
+				USB_INTRF_FUNC_SUSPEND_RW |
+					USB_INTRF_FUNC_SUSPEND_LP,
+				NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+/*
+ * usb_disable_remote_wakeup - disable remote wakeup for a device
+ * @udev: target device
+ *
+ * For USB-2 devices: Clear the device's remote wakeup feature.
+ *
+ * For USB-3 devices: Assume there's only one function on the device and
+ * disable remote wake for the first interface.  FIXME if the interface
+ * association descriptor shows there's more than one function.
+ */
+static int usb_disable_remote_wakeup(struct usb_device *udev)
+{
+	if (udev->speed < USB_SPEED_SUPER)
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	else
+		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+				USB_INTRF_FUNC_SUSPEND,	0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+}
+
+/* Count of wakeup-enabled devices at or below udev */
+static unsigned wakeup_enabled_descendants(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+
+	return udev->do_remote_wakeup +
+			(hub ? hub->wakeup_enabled_descendants : 0);
+}
+
+/*
+ * usb_port_suspend - suspend a usb device's upstream port
+ * @udev: device that's no longer in active use, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism.  They may also be taken out of
+ * suspend by the host, using usb_port_resume().  It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
+ * Selective port suspend reduces power; most suspended devices draw
+ * less than 500 uA.  It's also used in OTG, along with remote wakeup.
+ * All devices below the suspended port are also suspended.
+ *
+ * Devices leave suspend state when the host wakes them up.  Some devices
+ * also support "remote wakeup", where the device can activate the USB
+ * tree above them to deliver data, such as a keypress or packet.  In
+ * some cases, this wakes the USB host.
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices.  That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
+ * Devices on USB hub ports have only one "suspend" state, corresponding
+ * to ACPI D2, "may cause the device to lose some context".
+ * State transitions include:
+ *
+ *   - suspend, resume ... when the VBUS power link stays live
+ *   - suspend, disconnect ... VBUS lost
+ *
+ * Once VBUS drop breaks the circuit, the port it's using has to go through
+ * normal re-enumeration procedures, starting with enabling VBUS power.
+ * Other than re-initializing the hub (plug/unplug, except for root hubs),
+ * Linux (2.6) currently has NO mechanisms to initiate that:  no hub_wq
+ * timer, no SRP, no requests through sysfs.
+ *
+ * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
+ * suspended until their bus goes into global suspend (i.e., the root
+ * hub is suspended).  Nevertheless, we change @udev->state to
+ * USB_STATE_SUSPENDED as this is the device's "logical" state.  The actual
+ * upstream port setting is stored in @udev->port_is_suspended.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_hub	*hub = usb_hub_to_struct_hub(udev->parent);
+	struct usb_port *port_dev = hub->ports[udev->portnum - 1];
+	int		port1 = udev->portnum;
+	int		status;
+	bool		really_suspend = true;
+
+	usb_lock_port(port_dev);
+
+	/* enable remote wakeup when appropriate; this lets the device
+	 * wake up the upstream hub (including maybe the root hub).
+	 *
+	 * NOTE:  OTG devices may issue remote wakeup (or SRP) even when
+	 * we don't explicitly enable it here.
+	 */
+	if (udev->do_remote_wakeup) {
+		status = usb_enable_remote_wakeup(udev);
+		if (status) {
+			dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
+					status);
+			/* bail if autosuspend is requested */
+			if (PMSG_IS_AUTO(msg))
+				goto err_wakeup;
+		}
+	}
+
+	/* disable USB2 hardware LPM */
+	if (udev->usb2_hw_lpm_enabled == 1)
+		usb_set_usb2_hardware_lpm(udev, 0);
+
+	if (usb_disable_ltm(udev)) {
+		dev_err(&udev->dev, "Failed to disable LTM before suspend\n.");
+		status = -ENOMEM;
+		if (PMSG_IS_AUTO(msg))
+			goto err_ltm;
+	}
+	if (usb_unlocked_disable_lpm(udev)) {
+		dev_err(&udev->dev, "Failed to disable LPM before suspend\n.");
+		status = -ENOMEM;
+		if (PMSG_IS_AUTO(msg))
+			goto err_lpm3;
+	}
+
+	/* see 7.1.7.6 */
+	if (hub_is_superspeed(hub->hdev))
+		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
+
+	/*
+	 * For system suspend, we do not need to enable the suspend feature
+	 * on individual USB-2 ports.  The devices will automatically go
+	 * into suspend a few ms after the root hub stops sending packets.
+	 * The USB 2.0 spec calls this "global suspend".
+	 *
+	 * However, many USB hubs have a bug: They don't relay wakeup requests
+	 * from a downstream port if the port's suspend feature isn't on.
+	 * Therefore we will turn on the suspend feature if udev or any of its
+	 * descendants is enabled for remote wakeup.
+	 */
+	else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
+		status = set_port_feature(hub->hdev, port1,
+				USB_PORT_FEAT_SUSPEND);
+	else {
+		really_suspend = false;
+		status = 0;
+	}
+	if (status) {
+		dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
+
+		/* Try to enable USB3 LPM and LTM again */
+		usb_unlocked_enable_lpm(udev);
+ err_lpm3:
+		usb_enable_ltm(udev);
+ err_ltm:
+		/* Try to enable USB2 hardware LPM again */
+		if (udev->usb2_hw_lpm_capable == 1)
+			usb_set_usb2_hardware_lpm(udev, 1);
+
+		if (udev->do_remote_wakeup)
+			(void) usb_disable_remote_wakeup(udev);
+ err_wakeup:
+
+		/* System sleep transitions should never fail */
+		if (!PMSG_IS_AUTO(msg))
+			status = 0;
+	} else {
+		dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
+				(PMSG_IS_AUTO(msg) ? "auto-" : ""),
+				udev->do_remote_wakeup);
+		if (really_suspend) {
+			udev->port_is_suspended = 1;
+
+			/* device has up to 10 msec to fully suspend */
+			msleep(10);
+		}
+		usb_set_device_state(udev, USB_STATE_SUSPENDED);
+	}
+
+	if (status == 0 && !udev->do_remote_wakeup && udev->persist_enabled
+			&& test_and_clear_bit(port1, hub->child_usage_bits))
+		pm_runtime_put_sync(&port_dev->dev);
+
+	usb_mark_last_busy(hub->hdev);
+
+	usb_unlock_port(port_dev);
+	return status;
+}
+
+/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special "resume" signaling.  This routine kicks in shortly after
+ * hardware resume signaling is finished, either because of selective
+ * resume (by host) or remote wakeup (by device) ... now see what changed
+ * in the tree that's rooted at this device.
+ *
+ * If @udev->reset_resume is set then the device is reset before the
+ * status check is done.
+ */
+static int finish_port_resume(struct usb_device *udev)
+{
+	int	status = 0;
+	u16	devstatus = 0;
+
+	/* caller owns the udev device lock */
+	dev_dbg(&udev->dev, "%s\n",
+		udev->reset_resume ? "finish reset-resume" : "finish resume");
+
+	/* usb ch9 identifies four variants of SUSPENDED, based on what
+	 * state the device resumes to.  Linux currently won't see the
+	 * first two on the host side; they'd be inside hub_port_init()
+	 * during many timeouts, but hub_wq can't suspend until later.
+	 */
+	usb_set_device_state(udev, udev->actconfig
+			? USB_STATE_CONFIGURED
+			: USB_STATE_ADDRESS);
+
+	/* 10.5.4.5 says not to reset a suspended port if the attached
+	 * device is enabled for remote wakeup.  Hence the reset
+	 * operation is carried out here, after the port has been
+	 * resumed.
+	 */
+	if (udev->reset_resume) {
+		/*
+		 * If the device morphs or switches modes when it is reset,
+		 * we don't want to perform a reset-resume.  We'll fail the
+		 * resume, which will cause a logical disconnect, and then
+		 * the device will be rediscovered.
+		 */
+ retry_reset_resume:
+		if (udev->quirks & USB_QUIRK_RESET)
+			status = -ENODEV;
+		else
+			status = usb_reset_and_verify_device(udev);
+	}
+
+	/* 10.5.4.5 says be sure devices in the tree are still there.
+	 * For now let's assume the device didn't go crazy on resume,
+	 * and device drivers will know about any resume quirks.
+	 */
+	if (status == 0) {
+		devstatus = 0;
+		status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+
+		/* If a normal resume failed, try doing a reset-resume */
+		if (status && !udev->reset_resume && udev->persist_enabled) {
+			dev_dbg(&udev->dev, "retry with reset-resume\n");
+			udev->reset_resume = 1;
+			goto retry_reset_resume;
+		}
+	}
+
+	if (status) {
+		dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
+				status);
+	/*
+	 * There are a few quirky devices which violate the standard
+	 * by claiming to have remote wakeup enabled after a reset,
+	 * which crash if the feature is cleared, hence check for
+	 * udev->reset_resume
+	 */
+	} else if (udev->actconfig && !udev->reset_resume) {
+		if (udev->speed < USB_SPEED_SUPER) {
+			if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+				status = usb_disable_remote_wakeup(udev);
+		} else {
+			status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+					&devstatus);
+			if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+					| USB_INTRF_STAT_FUNC_RW))
+				status = usb_disable_remote_wakeup(udev);
+		}
+
+		if (status)
+			dev_dbg(&udev->dev,
+				"disable remote wakeup, status %d\n",
+				status);
+		status = 0;
+	}
+	return status;
+}
+
+/*
+ * There are some SS USB devices which take longer time for link training.
+ * XHCI specs 4.19.4 says that when Link training is successful, port
+ * sets CSC bit to 1. So if SW reads port status before successful link
+ * training, then it will not find device to be present.
+ * USB Analyzer log with such buggy devices show that in some cases
+ * device switch on the RX termination after long delay of host enabling
+ * the VBUS. In few other cases it has been seen that device fails to
+ * negotiate link training in first attempt. It has been
+ * reported till now that few devices take as long as 2000 ms to train
+ * the link after host enabling its VBUS and termination. Following
+ * routine implements a 2000 ms timeout for link training. If in a case
+ * link trains before timeout, loop will exit earlier.
+ *
+ * FIXME: If a device was connected before suspend, but was removed
+ * while system was asleep, then the loop in the following routine will
+ * only exit at timeout.
+ *
+ * This routine should only be called when persist is enabled for a SS
+ * device.
+ */
+static int wait_for_ss_port_enable(struct usb_device *udev,
+		struct usb_hub *hub, int *port1,
+		u16 *portchange, u16 *portstatus)
+{
+	int status = 0, delay_ms = 0;
+
+	while (delay_ms < 2000) {
+		if (status || *portstatus & USB_PORT_STAT_CONNECTION)
+			break;
+		msleep(20);
+		delay_ms += 20;
+		status = hub_port_status(hub, *port1, portstatus, portchange);
+	}
+	return status;
+}
+
+/*
+ * usb_port_resume - re-activate a suspended usb device's upstream port
+ * @udev: device to re-activate, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * If @udev->reset_resume is set then this routine won't check that the
+ * port is still enabled.  Furthermore, finish_port_resume() above will
+ * reset @udev.  The end result is that a broken power session can be
+ * recovered and @udev will appear to persist across a loss of VBUS power.
+ *
+ * For example, if a host controller doesn't maintain VBUS suspend current
+ * during a system sleep or is reset when the system wakes up, all the USB
+ * power sessions below it will be broken.  This is especially troublesome
+ * for mass-storage devices containing mounted filesystems, since the
+ * device will appear to have disconnected and all the memory mappings
+ * to it will be lost.  Using the USB_PERSIST facility, the device can be
+ * made to appear as if it had not disconnected.
+ *
+ * This facility can be dangerous.  Although usb_reset_and_verify_device() makes
+ * every effort to insure that the same device is present after the
+ * reset as before, it cannot provide a 100% guarantee.  Furthermore it's
+ * quite possible for a device to remain unaltered but its media to be
+ * changed.  If the user replaces a flash memory card while the system is
+ * asleep, he will have only himself to blame when the filesystem on the
+ * new card is corrupted and the system crashes.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_port_resume(struct usb_device *udev, pm_message_t msg)
+{
+	struct usb_hub	*hub = usb_hub_to_struct_hub(udev->parent);
+	struct usb_port *port_dev = hub->ports[udev->portnum  - 1];
+	int		port1 = udev->portnum;
+	int		status;
+	u16		portchange, portstatus;
+
+	if (!test_and_set_bit(port1, hub->child_usage_bits)) {
+		status = pm_runtime_get_sync(&port_dev->dev);
+		if (status < 0) {
+			dev_dbg(&udev->dev, "can't resume usb port, status %d\n",
+					status);
+			return status;
+		}
+	}
+
+	usb_lock_port(port_dev);
+
+	/* Skip the initial Clear-Suspend step for a remote wakeup */
+	status = hub_port_status(hub, port1, &portstatus, &portchange);
+	if (status == 0 && !port_is_suspended(hub, portstatus))
+		goto SuspendCleared;
+
+	/* see 7.1.7.7; affects power usage, but not budgeting */
+	if (hub_is_superspeed(hub->hdev))
+		status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
+	else
+		status = usb_clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_SUSPEND);
+	if (status) {
+		dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
+	} else {
+		/* drive resume for USB_RESUME_TIMEOUT msec */
+		dev_dbg(&udev->dev, "usb %sresume\n",
+				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
+		msleep(USB_RESUME_TIMEOUT);
+
+		/* Virtual root hubs can trigger on GET_PORT_STATUS to
+		 * stop resume signaling.  Then finish the resume
+		 * sequence.
+		 */
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
+
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+	}
+
+ SuspendCleared:
+	if (status == 0) {
+		udev->port_is_suspended = 0;
+		if (hub_is_superspeed(hub->hdev)) {
+			if (portchange & USB_PORT_STAT_C_LINK_STATE)
+				usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			if (portchange & USB_PORT_STAT_C_SUSPEND)
+				usb_clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_C_SUSPEND);
+		}
+	}
+
+	if (udev->persist_enabled && hub_is_superspeed(hub->hdev))
+		status = wait_for_ss_port_enable(udev, hub, &port1, &portchange,
+				&portstatus);
+
+	status = check_port_resume_type(udev,
+			hub, port1, status, portchange, portstatus);
+	if (status == 0)
+		status = finish_port_resume(udev);
+	if (status < 0) {
+		dev_dbg(&udev->dev, "can't resume, status %d\n", status);
+		hub_port_logical_disconnect(hub, port1);
+	} else  {
+		/* Try to enable USB2 hardware LPM */
+		if (udev->usb2_hw_lpm_capable == 1)
+			usb_set_usb2_hardware_lpm(udev, 1);
+
+		/* Try to enable USB3 LTM and LPM */
+		usb_enable_ltm(udev);
+		usb_unlocked_enable_lpm(udev);
+	}
+
+	usb_unlock_port(port_dev);
+
+	return status;
+}
+
+int usb_remote_wakeup(struct usb_device *udev)
+{
+	int	status = 0;
+
+	usb_lock_device(udev);
+	if (udev->state == USB_STATE_SUSPENDED) {
+		dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
+		status = usb_autoresume_device(udev);
+		if (status == 0) {
+			/* Let the drivers do their thing, then... */
+			usb_autosuspend_device(udev);
+		}
+	}
+	usb_unlock_device(udev);
+	return status;
+}
+
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+		__must_hold(&port_dev->status_lock)
+{
+	struct usb_port *port_dev = hub->ports[port - 1];
+	struct usb_device *hdev;
+	struct usb_device *udev;
+	int connect_change = 0;
+	int ret;
+
+	hdev = hub->hdev;
+	udev = port_dev->child;
+	if (!hub_is_superspeed(hdev)) {
+		if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+			return 0;
+		usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+	} else {
+		if (!udev || udev->state != USB_STATE_SUSPENDED ||
+				 (portstatus & USB_PORT_STAT_LINK_STATE) !=
+				 USB_SS_PORT_LS_U0)
+			return 0;
+	}
+
+	if (udev) {
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+
+		usb_unlock_port(port_dev);
+		ret = usb_remote_wakeup(udev);
+		usb_lock_port(port_dev);
+		if (ret < 0)
+			connect_change = 1;
+	} else {
+		ret = -ENODEV;
+		hub_port_disable(hub, port, 1);
+	}
+	dev_dbg(&port_dev->dev, "resume, status %d\n", ret);
+	return connect_change;
+}
+
+static int check_ports_changed(struct usb_hub *hub)
+{
+	int port1;
+
+	for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+		u16 portstatus, portchange;
+		int status;
+
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (!status && portchange)
+			return 1;
+	}
+	return 0;
+}
+
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
+{
+	struct usb_hub		*hub = usb_get_intfdata (intf);
+	struct usb_device	*hdev = hub->hdev;
+	unsigned		port1;
+	int			status;
+
+	/*
+	 * Warn if children aren't already suspended.
+	 * Also, add up the number of wakeup-enabled descendants.
+	 */
+	hub->wakeup_enabled_descendants = 0;
+	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+
+		if (udev && udev->can_submit) {
+			dev_warn(&port_dev->dev, "device %s not suspended yet\n",
+					dev_name(&udev->dev));
+			if (PMSG_IS_AUTO(msg))
+				return -EBUSY;
+		}
+		if (udev)
+			hub->wakeup_enabled_descendants +=
+					wakeup_enabled_descendants(udev);
+	}
+
+	if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+		/* check if there are changes pending on hub ports */
+		if (check_ports_changed(hub)) {
+			if (PMSG_IS_AUTO(msg))
+				return -EBUSY;
+			pm_wakeup_event(&hdev->dev, 2000);
+		}
+	}
+
+	if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+		/* Enable hub to send remote wakeup for all ports. */
+		for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+			status = set_port_feature(hdev,
+					port1 |
+					USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+					USB_PORT_FEAT_REMOTE_WAKE_MASK);
+		}
+	}
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+
+	/* stop hub_wq and related activity */
+	hub_quiesce(hub, HUB_SUSPEND);
+	return 0;
+}
+
+static int hub_resume(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+	hub_activate(hub, HUB_RESUME);
+	return 0;
+}
+
+static int hub_reset_resume(struct usb_interface *intf)
+{
+	struct usb_hub *hub = usb_get_intfdata(intf);
+
+	dev_dbg(&intf->dev, "%s\n", __func__);
+	hub_activate(hub, HUB_RESET_RESUME);
+	return 0;
+}
+
+/**
+ * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
+ * @rhdev: struct usb_device for the root hub
+ *
+ * The USB host controller driver calls this function when its root hub
+ * is resumed and Vbus power has been interrupted or the controller
+ * has been reset.  The routine marks @rhdev as having lost power.
+ * When the hub driver is resumed it will take notice and carry out
+ * power-session recovery for all the "USB-PERSIST"-enabled child devices;
+ * the others will be disconnected.
+ */
+void usb_root_hub_lost_power(struct usb_device *rhdev)
+{
+	dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+	rhdev->reset_resume = 1;
+}
+EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
+
+static const char * const usb3_lpm_names[]  = {
+	"U0",
+	"U1",
+	"U2",
+	"U3",
+};
+
+/*
+ * Send a Set SEL control transfer to the device, prior to enabling
+ * device-initiated U1 or U2.  This lets the device know the exit latencies from
+ * the time the device initiates a U1 or U2 exit, to the time it will receive a
+ * packet from the host.
+ *
+ * This function will fail if the SEL or PEL values for udev are greater than
+ * the maximum allowed values for the link state to be enabled.
+ */
+static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
+{
+	struct usb_set_sel_req *sel_values;
+	unsigned long long u1_sel;
+	unsigned long long u1_pel;
+	unsigned long long u2_sel;
+	unsigned long long u2_pel;
+	int ret;
+
+	if (udev->state != USB_STATE_CONFIGURED)
+		return 0;
+
+	/* Convert SEL and PEL stored in ns to us */
+	u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+	u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+	u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+	u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+
+	/*
+	 * Make sure that the calculated SEL and PEL values for the link
+	 * state we're enabling aren't bigger than the max SEL/PEL
+	 * value that will fit in the SET SEL control transfer.
+	 * Otherwise the device would get an incorrect idea of the exit
+	 * latency for the link state, and could start a device-initiated
+	 * U1/U2 when the exit latencies are too high.
+	 */
+	if ((state == USB3_LPM_U1 &&
+				(u1_sel > USB3_LPM_MAX_U1_SEL_PEL ||
+				 u1_pel > USB3_LPM_MAX_U1_SEL_PEL)) ||
+			(state == USB3_LPM_U2 &&
+			 (u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
+			  u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
+		dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n",
+				usb3_lpm_names[state], u1_sel, u1_pel);
+		return -EINVAL;
+	}
+
+	/*
+	 * If we're enabling device-initiated LPM for one link state,
+	 * but the other link state has a too high SEL or PEL value,
+	 * just set those values to the max in the Set SEL request.
+	 */
+	if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL)
+		u1_sel = USB3_LPM_MAX_U1_SEL_PEL;
+
+	if (u1_pel > USB3_LPM_MAX_U1_SEL_PEL)
+		u1_pel = USB3_LPM_MAX_U1_SEL_PEL;
+
+	if (u2_sel > USB3_LPM_MAX_U2_SEL_PEL)
+		u2_sel = USB3_LPM_MAX_U2_SEL_PEL;
+
+	if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
+		u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
+
+	/*
+	 * usb_enable_lpm() can be called as part of a failed device reset,
+	 * which may be initiated by an error path of a mass storage driver.
+	 * Therefore, use GFP_NOIO.
+	 */
+	sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
+	if (!sel_values)
+		return -ENOMEM;
+
+	sel_values->u1_sel = u1_sel;
+	sel_values->u1_pel = u1_pel;
+	sel_values->u2_sel = cpu_to_le16(u2_sel);
+	sel_values->u2_pel = cpu_to_le16(u2_pel);
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_SEL,
+			USB_RECIP_DEVICE,
+			0, 0,
+			sel_values, sizeof *(sel_values),
+			USB_CTRL_SET_TIMEOUT);
+	kfree(sel_values);
+	return ret;
+}
+
+/*
+ * Enable or disable device-initiated U1 or U2 transitions.
+ */
+static int usb_set_device_initiated_lpm(struct usb_device *udev,
+		enum usb3_link_state state, bool enable)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_DEVICE_U1_ENABLE;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_DEVICE_U2_ENABLE;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n",
+				__func__, enable ? "enable" : "disable");
+		return -EINVAL;
+	}
+
+	if (udev->state != USB_STATE_CONFIGURED) {
+		dev_dbg(&udev->dev, "%s: Can't %s %s state "
+				"for unconfigured device.\n",
+				__func__, enable ? "enable" : "disable",
+				usb3_lpm_names[state]);
+		return 0;
+	}
+
+	if (enable) {
+		/*
+		 * Now send the control transfer to enable device-initiated LPM
+		 * for either U1 or U2.
+		 */
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	} else {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	}
+	if (ret < 0) {
+		dev_warn(&udev->dev, "%s of device-initiated %s failed.\n",
+				enable ? "Enable" : "Disable",
+				usb3_lpm_names[state]);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int usb_set_lpm_timeout(struct usb_device *udev,
+		enum usb3_link_state state, int timeout)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_PORT_FEAT_U1_TIMEOUT;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_PORT_FEAT_U2_TIMEOUT;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT &&
+			timeout != USB3_LPM_DEVICE_INITIATED) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, "
+				"which is a reserved value.\n",
+				usb3_lpm_names[state], timeout);
+		return -EINVAL;
+	}
+
+	ret = set_port_feature(udev->parent,
+			USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
+			feature);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x,"
+				"error code %i\n", usb3_lpm_names[state],
+				timeout, ret);
+		return -EBUSY;
+	}
+	if (state == USB3_LPM_U1)
+		udev->u1_params.timeout = timeout;
+	else
+		udev->u2_params.timeout = timeout;
+	return 0;
+}
+
+/*
+ * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
+ * U1/U2 entry.
+ *
+ * We will attempt to enable U1 or U2, but there are no guarantees that the
+ * control transfers to set the hub timeout or enable device-initiated U1/U2
+ * will be successful.
+ *
+ * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
+ * driver know about it.  If that call fails, it should be harmless, and just
+ * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
+ */
+static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	int timeout, ret;
+	__u8 u1_mel = udev->bos->ss_cap->bU1devExitLat;
+	__le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat;
+
+	/* If the device says it doesn't have *any* exit latency to come out of
+	 * U1 or U2, it's probably lying.  Assume it doesn't implement that link
+	 * state.
+	 */
+	if ((state == USB3_LPM_U1 && u1_mel == 0) ||
+			(state == USB3_LPM_U2 && u2_mel == 0))
+		return;
+
+	/*
+	 * First, let the device know about the exit latencies
+	 * associated with the link state we're about to enable.
+	 */
+	ret = usb_req_set_sel(udev, state);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n",
+				usb3_lpm_names[state]);
+		return;
+	}
+
+	/* We allow the host controller to set the U1/U2 timeout internally
+	 * first, so that it can change its schedule to account for the
+	 * additional latency to send data to a device in a lower power
+	 * link state.
+	 */
+	timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state);
+
+	/* xHCI host controller doesn't want to enable this LPM state. */
+	if (timeout == 0)
+		return;
+
+	if (timeout < 0) {
+		dev_warn(&udev->dev, "Could not enable %s link state, "
+				"xHCI error %i.\n", usb3_lpm_names[state],
+				timeout);
+		return;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, timeout))
+		/* If we can't set the parent hub U1/U2 timeout,
+		 * device-initiated LPM won't be allowed either, so let the xHCI
+		 * host know that this link state won't be enabled.
+		 */
+		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+
+	/* Only a configured device will accept the Set Feature U1/U2_ENABLE */
+	else if (udev->actconfig)
+		usb_set_device_initiated_lpm(udev, state, true);
+
+}
+
+/*
+ * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
+ * U1/U2 entry.
+ *
+ * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry.
+ * If zero is returned, the parent will not allow the link to go into U1/U2.
+ *
+ * If zero is returned, device-initiated U1/U2 entry may still be enabled, but
+ * it won't have an effect on the bus link state because the parent hub will
+ * still disallow device-initiated U1/U2 entry.
+ *
+ * If zero is returned, the xHCI host controller may still think U1/U2 entry is
+ * possible.  The result will be slightly more bus bandwidth will be taken up
+ * (to account for U1/U2 exit latency), but it should be harmless.
+ */
+static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	switch (state) {
+	case USB3_LPM_U1:
+	case USB3_LPM_U2:
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, 0))
+		return -EBUSY;
+
+	usb_set_device_initiated_lpm(udev, state, false);
+
+	if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state))
+		dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
+				"bus schedule bandwidth may be impacted.\n",
+				usb3_lpm_names[state]);
+	return 0;
+}
+
+/*
+ * Disable hub-initiated and device-initiated U1 and U2 entry.
+ * Caller must own the bandwidth_mutex.
+ *
+ * This will call usb_enable_lpm() on failure, which will decrement
+ * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero.
+ */
+int usb_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	if (!udev || !udev->parent ||
+			udev->speed != USB_SPEED_SUPER ||
+			!udev->lpm_capable ||
+			udev->state < USB_STATE_DEFAULT)
+		return 0;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd || !hcd->driver->disable_usb3_lpm_timeout)
+		return 0;
+
+	udev->lpm_disable_count++;
+	if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
+		return 0;
+
+	/* If LPM is enabled, attempt to disable it. */
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U1))
+		goto enable_lpm;
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
+		goto enable_lpm;
+
+	return 0;
+
+enable_lpm:
+	usb_enable_lpm(udev);
+	return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_disable_lpm() */
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret;
+
+	if (!hcd)
+		return -EINVAL;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	ret = usb_disable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+/*
+ * Attempt to enable device-initiated and hub-initiated U1 and U2 entry.  The
+ * xHCI host policy may prevent U1 or U2 from being enabled.
+ *
+ * Other callers may have disabled link PM, so U1 and U2 entry will be disabled
+ * until the lpm_disable_count drops to zero.  Caller must own the
+ * bandwidth_mutex.
+ */
+void usb_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	if (!udev || !udev->parent ||
+			udev->speed != USB_SPEED_SUPER ||
+			!udev->lpm_capable ||
+			udev->state < USB_STATE_DEFAULT)
+		return;
+
+	udev->lpm_disable_count--;
+	hcd = bus_to_hcd(udev->bus);
+	/* Double check that we can both enable and disable LPM.
+	 * Device must be configured to accept set feature U1/U2 timeout.
+	 */
+	if (!hcd || !hcd->driver->enable_usb3_lpm_timeout ||
+			!hcd->driver->disable_usb3_lpm_timeout)
+		return;
+
+	if (udev->lpm_disable_count > 0)
+		return;
+
+	usb_enable_link_state(hcd, udev, USB3_LPM_U1);
+	usb_enable_link_state(hcd, udev, USB3_LPM_U2);
+}
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_enable_lpm() */
+void usb_unlocked_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd)
+		return;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	usb_enable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+
+#else	/* CONFIG_PM */
+
+#define hub_suspend		NULL
+#define hub_resume		NULL
+#define hub_reset_resume	NULL
+
+int usb_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+void usb_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+void usb_unlocked_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+int usb_disable_ltm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_ltm);
+
+void usb_enable_ltm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_ltm);
+
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+{
+	return 0;
+}
+
+#endif	/* CONFIG_PM */
+
+
+/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
+ *
+ * Between connect detection and reset signaling there must be a delay
+ * of 100ms at least for debounce and power-settling.  The corresponding
+ * timer shall restart whenever the downstream port detects a disconnect.
+ *
+ * Apparently there are some bluetooth and irda-dongles and a number of
+ * low-speed devices for which this debounce period may last over a second.
+ * Not covered by the spec - but easy to deal with.
+ *
+ * This implementation uses a 1500ms total debounce timeout; if the
+ * connection isn't stable by then it returns -ETIMEDOUT.  It checks
+ * every 25ms for transient disconnects.  When the port status has been
+ * unchanged for 100ms it returns the port status.
+ */
+int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected)
+{
+	int ret;
+	u16 portchange, portstatus;
+	unsigned connection = 0xffff;
+	int total_time, stable_time = 0;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if (!(portchange & USB_PORT_STAT_C_CONNECTION) &&
+		     (portstatus & USB_PORT_STAT_CONNECTION) == connection) {
+			if (!must_be_connected ||
+			     (connection == USB_PORT_STAT_CONNECTION))
+				stable_time += HUB_DEBOUNCE_STEP;
+			if (stable_time >= HUB_DEBOUNCE_STABLE)
+				break;
+		} else {
+			stable_time = 0;
+			connection = portstatus & USB_PORT_STAT_CONNECTION;
+		}
+
+		if (portchange & USB_PORT_STAT_C_CONNECTION) {
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+		}
+
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+
+	dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n",
+			total_time, stable_time, portstatus);
+
+	if (stable_time < HUB_DEBOUNCE_STABLE)
+		return -ETIMEDOUT;
+	return portstatus;
+}
+
+void usb_ep0_reinit(struct usb_device *udev)
+{
+	usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+	usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
+	usb_enable_endpoint(udev, &udev->ep0, true);
+}
+EXPORT_SYMBOL_GPL(usb_ep0_reinit);
+
+#define usb_sndaddr0pipe()	(PIPE_CONTROL << 30)
+#define usb_rcvaddr0pipe()	((PIPE_CONTROL << 30) | USB_DIR_IN)
+
+static int hub_set_address(struct usb_device *udev, int devnum)
+{
+	int retval;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	/*
+	 * The host controller will choose the device address,
+	 * instead of the core having chosen it earlier
+	 */
+	if (!hcd->driver->address_device && devnum <= 1)
+		return -EINVAL;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+	if (hcd->driver->address_device)
+		retval = hcd->driver->address_device(hcd, udev);
+	else
+		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+				USB_REQ_SET_ADDRESS, 0, devnum, 0,
+				NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (retval == 0) {
+		update_devnum(udev, devnum);
+		/* Device now using proper address. */
+		usb_set_device_state(udev, USB_STATE_ADDRESS);
+		usb_ep0_reinit(udev);
+	}
+	return retval;
+}
+
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+	int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
+
+	if (!udev->usb2_hw_lpm_capable)
+		return;
+
+	if (hub)
+		connect_type = hub->ports[udev->portnum - 1]->connect_type;
+
+	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
+			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+		udev->usb2_hw_lpm_allowed = 1;
+		usb_set_usb2_hardware_lpm(udev, 1);
+	}
+}
+
+static int hub_enable_device(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd->driver->enable_device)
+		return 0;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	return hcd->driver->enable_device(hcd, udev);
+}
+
+/* Reset device, (re)assign address, get device descriptor.
+ * Device connection must be stable, no more debouncing needed.
+ * Returns device in USB_STATE_ADDRESS, except on error.
+ *
+ * If this is called for an already-existing device (as part of
+ * usb_reset_and_verify_device), the caller must own the device lock and
+ * the port lock.  For a newly detected device that is not accessible
+ * through any global pointers, it's not necessary to lock the device,
+ * but it is still necessary to lock the port.
+ */
+static int
+hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+		int retry_counter)
+{
+	struct usb_device	*hdev = hub->hdev;
+	struct usb_hcd		*hcd = bus_to_hcd(hdev->bus);
+	int			i, j, retval;
+	unsigned		delay = HUB_SHORT_RESET_TIME;
+	enum usb_device_speed	oldspeed = udev->speed;
+	const char		*speed;
+	int			devnum = udev->devnum;
+
+	/* root hub ports have a slightly longer reset period
+	 * (from USB 2.0 spec, section 7.1.7.5)
+	 */
+	if (!hdev->parent) {
+		delay = HUB_ROOT_RESET_TIME;
+		if (port1 == hdev->bus->otg_port)
+			hdev->bus->b_hnp_enable = 0;
+	}
+
+	/* Some low speed devices have problems with the quick delay, so */
+	/*  be a bit pessimistic with those devices. RHbug #23670 */
+	if (oldspeed == USB_SPEED_LOW)
+		delay = HUB_LONG_RESET_TIME;
+
+	mutex_lock(&hdev->bus->usb_address0_mutex);
+
+	/* Reset the device; full speed may morph to high speed */
+	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+	retval = hub_port_reset(hub, port1, udev, delay, false);
+	if (retval < 0)		/* error or disconnect */
+		goto fail;
+	/* success, speed is known */
+
+	retval = -ENODEV;
+
+	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
+		dev_dbg(&udev->dev, "device reset changed speed!\n");
+		goto fail;
+	}
+	oldspeed = udev->speed;
+
+	/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
+	 * it's fixed size except for full speed devices.
+	 * For Wireless USB devices, ep0 max packet is always 512 (tho
+	 * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
+	 */
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
+	case USB_SPEED_WIRELESS:	/* fixed at 512 */
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
+		break;
+	case USB_SPEED_HIGH:		/* fixed at 64 */
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+		break;
+	case USB_SPEED_FULL:		/* 8, 16, 32, or 64 */
+		/* to determine the ep0 maxpacket size, try to read
+		 * the device descriptor to get bMaxPacketSize0 and
+		 * then correct our initial guess.
+		 */
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
+		break;
+	case USB_SPEED_LOW:		/* fixed at 8 */
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
+		break;
+	default:
+		goto fail;
+	}
+
+	if (udev->speed == USB_SPEED_WIRELESS)
+		speed = "variable speed Wireless";
+	else
+		speed = usb_speed_string(udev->speed);
+
+	if (udev->speed != USB_SPEED_SUPER)
+		dev_info(&udev->dev,
+				"%s %s USB device number %d using %s\n",
+				(udev->config) ? "reset" : "new", speed,
+				devnum, udev->bus->controller->driver->name);
+
+	/* Set up TT records, if needed  */
+	if (hdev->tt) {
+		udev->tt = hdev->tt;
+		udev->ttport = hdev->ttport;
+	} else if (udev->speed != USB_SPEED_HIGH
+			&& hdev->speed == USB_SPEED_HIGH) {
+		if (!hub->tt.hub) {
+			dev_err(&udev->dev, "parent hub has no TT\n");
+			retval = -EINVAL;
+			goto fail;
+		}
+		udev->tt = &hub->tt;
+		udev->ttport = port1;
+	}
+
+	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
+	 * Because device hardware and firmware is sometimes buggy in
+	 * this area, and this is how Linux has done it for ages.
+	 * Change it cautiously.
+	 *
+	 * NOTE:  If use_new_scheme() is true we will start by issuing
+	 * a 64-byte GET_DESCRIPTOR request.  This is what Windows does,
+	 * so it may help with some non-standards-compliant devices.
+	 * Otherwise we start with SET_ADDRESS and then try to read the
+	 * first 8 bytes of the device descriptor to get the ep0 maxpacket
+	 * value.
+	 */
+	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+		bool did_new_scheme = false;
+
+		if (use_new_scheme(udev, retry_counter)) {
+			struct usb_device_descriptor *buf;
+			int r = 0;
+
+			did_new_scheme = true;
+			retval = hub_enable_device(udev);
+			if (retval < 0) {
+				dev_err(&udev->dev,
+					"hub failed to enable device, error %d\n",
+					retval);
+				goto fail;
+			}
+
+#define GET_DESCRIPTOR_BUFSIZE	64
+			buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
+			if (!buf) {
+				retval = -ENOMEM;
+				continue;
+			}
+
+			/* Retry on all errors; some devices are flakey.
+			 * 255 is for WUSB devices, we actually need to use
+			 * 512 (WUSB1.0[4.8.1]).
+			 */
+			for (j = 0; j < 3; ++j) {
+				buf->bMaxPacketSize0 = 0;
+				r = usb_control_msg(udev, usb_rcvaddr0pipe(),
+					USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+					USB_DT_DEVICE << 8, 0,
+					buf, GET_DESCRIPTOR_BUFSIZE,
+					initial_descriptor_timeout);
+				switch (buf->bMaxPacketSize0) {
+				case 8: case 16: case 32: case 64: case 255:
+					if (buf->bDescriptorType ==
+							USB_DT_DEVICE) {
+						r = 0;
+						break;
+					}
+					/* FALL THROUGH */
+				default:
+					if (r == 0)
+						r = -EPROTO;
+					break;
+				}
+				if (r == 0)
+					break;
+			}
+			udev->descriptor.bMaxPacketSize0 =
+					buf->bMaxPacketSize0;
+			kfree(buf);
+
+			retval = hub_port_reset(hub, port1, udev, delay, false);
+			if (retval < 0)		/* error or disconnect */
+				goto fail;
+			if (oldspeed != udev->speed) {
+				dev_dbg(&udev->dev,
+					"device reset changed speed!\n");
+				retval = -ENODEV;
+				goto fail;
+			}
+			if (r) {
+				if (r != -ENODEV)
+					dev_err(&udev->dev, "device descriptor read/64, error %d\n",
+							r);
+				retval = -EMSGSIZE;
+				continue;
+			}
+#undef GET_DESCRIPTOR_BUFSIZE
+		}
+
+		/*
+		 * If device is WUSB, we already assigned an
+		 * unauthorized address in the Connect Ack sequence;
+		 * authorization will assign the final address.
+		 */
+		if (udev->wusb == 0) {
+			for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
+				retval = hub_set_address(udev, devnum);
+				if (retval >= 0)
+					break;
+				msleep(200);
+			}
+			if (retval < 0) {
+				if (retval != -ENODEV)
+					dev_err(&udev->dev, "device not accepting address %d, error %d\n",
+							devnum, retval);
+				goto fail;
+			}
+			if (udev->speed == USB_SPEED_SUPER) {
+				devnum = udev->devnum;
+				dev_info(&udev->dev,
+						"%s SuperSpeed USB device number %d using %s\n",
+						(udev->config) ? "reset" : "new",
+						devnum, udev->bus->controller->driver->name);
+			}
+
+			/* cope with hardware quirkiness:
+			 *  - let SET_ADDRESS settle, some device hardware wants it
+			 *  - read ep0 maxpacket even for high and low speed,
+			 */
+			msleep(10);
+			/* use_new_scheme() checks the speed which may have
+			 * changed since the initial look so we cache the result
+			 * in did_new_scheme
+			 */
+			if (did_new_scheme)
+				break;
+		}
+
+		retval = usb_get_device_descriptor(udev, 8);
+		if (retval < 8) {
+			if (retval != -ENODEV)
+				dev_err(&udev->dev,
+					"device descriptor read/8, error %d\n",
+					retval);
+			if (retval >= 0)
+				retval = -EMSGSIZE;
+		} else {
+			retval = 0;
+			break;
+		}
+	}
+	if (retval)
+		goto fail;
+
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed == USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, "
+				"warm reset device\n");
+		hub_port_reset(hub, port1, udev,
+				HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
+			udev->speed == USB_SPEED_SUPER)
+		i = 512;
+	else
+		i = udev->descriptor.bMaxPacketSize0;
+	if (usb_endpoint_maxp(&udev->ep0.desc) != i) {
+		if (udev->speed == USB_SPEED_LOW ||
+				!(i == 8 || i == 16 || i == 32 || i == 64)) {
+			dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
+			retval = -EMSGSIZE;
+			goto fail;
+		}
+		if (udev->speed == USB_SPEED_FULL)
+			dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
+		else
+			dev_warn(&udev->dev, "Using ep0 maxpacket: %d\n", i);
+		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
+		usb_ep0_reinit(udev);
+	}
+
+	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
+	if (retval < (signed)sizeof(udev->descriptor)) {
+		if (retval != -ENODEV)
+			dev_err(&udev->dev, "device descriptor read/all, error %d\n",
+					retval);
+		if (retval >= 0)
+			retval = -ENOMSG;
+		goto fail;
+	}
+
+	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(udev);
+		if (!retval) {
+			udev->lpm_capable = usb_device_supports_lpm(udev);
+			usb_set_lpm_parameters(udev);
+		}
+	}
+
+	retval = 0;
+	/* notify HCD that we have a device connected and addressed */
+	if (hcd->driver->update_device)
+		hcd->driver->update_device(hcd, udev);
+	hub_set_initial_usb2_lpm_policy(udev);
+fail:
+	if (retval) {
+		hub_port_disable(hub, port1, 0);
+		update_devnum(udev, devnum);	/* for disconnect processing */
+	}
+	mutex_unlock(&hdev->bus->usb_address0_mutex);
+	return retval;
+}
+
+static void
+check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
+{
+	struct usb_qualifier_descriptor	*qual;
+	int				status;
+
+	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
+		return;
+
+	qual = kmalloc (sizeof *qual, GFP_KERNEL);
+	if (qual == NULL)
+		return;
+
+	status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
+			qual, sizeof *qual);
+	if (status == sizeof *qual) {
+		dev_info(&udev->dev, "not running at top speed; "
+			"connect to a high speed hub\n");
+		/* hub LEDs are probably harder to miss than syslog */
+		if (hub->has_indicators) {
+			hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
+			queue_delayed_work(system_power_efficient_wq,
+					&hub->leds, 0);
+		}
+	}
+	kfree(qual);
+}
+
+static unsigned
+hub_power_remaining (struct usb_hub *hub)
+{
+	struct usb_device *hdev = hub->hdev;
+	int remaining;
+	int port1;
+
+	if (!hub->limited_power)
+		return 0;
+
+	remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
+	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+		struct usb_port *port_dev = hub->ports[port1 - 1];
+		struct usb_device *udev = port_dev->child;
+		unsigned unit_load;
+		int delta;
+
+		if (!udev)
+			continue;
+		if (hub_is_superspeed(udev))
+			unit_load = 150;
+		else
+			unit_load = 100;
+
+		/*
+		 * Unconfigured devices may not use more than one unit load,
+		 * or 8mA for OTG ports
+		 */
+		if (udev->actconfig)
+			delta = usb_get_max_power(udev, udev->actconfig);
+		else if (port1 != udev->bus->otg_port || hdev->parent)
+			delta = unit_load;
+		else
+			delta = 8;
+		if (delta > hub->mA_per_port)
+			dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n",
+					delta, hub->mA_per_port);
+		remaining -= delta;
+	}
+	if (remaining < 0) {
+		dev_warn(hub->intfdev, "%dmA over power budget!\n",
+			-remaining);
+		remaining = 0;
+	}
+	return remaining;
+}
+
+static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
+		u16 portchange)
+{
+	int status, i;
+	unsigned unit_load;
+	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	static int unreliable_port = -1;
+
+	/* Disconnect any existing devices under this port */
+	if (udev) {
+		if (hcd->usb_phy && !hdev->parent)
+			usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
+		usb_disconnect(&port_dev->child);
+	}
+
+	/* We can forget about a "removed" device when there's a physical
+	 * disconnect or the connect status changes.
+	 */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+			(portchange & USB_PORT_STAT_C_CONNECTION))
+		clear_bit(port1, hub->removed_bits);
+
+	if (portchange & (USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE)) {
+		status = hub_port_debounce_be_stable(hub, port1);
+		if (status < 0) {
+			if (status != -ENODEV &&
+				port1 != unreliable_port &&
+				printk_ratelimit())
+				dev_err(&port_dev->dev, "connect-debounce failed\n");
+			portstatus &= ~USB_PORT_STAT_CONNECTION;
+			unreliable_port = port1;
+		} else {
+			portstatus = status;
+		}
+	}
+
+	/* Return now if debouncing failed or nothing is connected or
+	 * the device was "removed".
+	 */
+	if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+			test_bit(port1, hub->removed_bits)) {
+
+		/*
+		 * maybe switch power back on (e.g. root hub was reset)
+		 * but only if the port isn't owned by someone else.
+		 */
+		if (hub_is_port_power_switchable(hub)
+				&& !port_is_power_on(hub, portstatus)
+				&& !port_dev->port_owner)
+			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+
+		if (portstatus & USB_PORT_STAT_ENABLE)
+			goto done;
+		return;
+	}
+	if (hub_is_superspeed(hub->hdev))
+		unit_load = 150;
+	else
+		unit_load = 100;
+
+	status = 0;
+	for (i = 0; i < SET_CONFIG_TRIES; i++) {
+
+		/* reallocate for each attempt, since references
+		 * to the previous one can escape in various ways
+		 */
+		udev = usb_alloc_dev(hdev, hdev->bus, port1);
+		if (!udev) {
+			dev_err(&port_dev->dev,
+					"couldn't allocate usb_device\n");
+			goto done;
+		}
+
+		usb_set_device_state(udev, USB_STATE_POWERED);
+		udev->bus_mA = hub->mA_per_port;
+		udev->level = hdev->level + 1;
+		udev->wusb = hub_is_wusb(hub);
+
+		/* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+		if (hub_is_superspeed(hub->hdev))
+			udev->speed = USB_SPEED_SUPER;
+		else
+			udev->speed = USB_SPEED_UNKNOWN;
+
+		choose_devnum(udev);
+		if (udev->devnum <= 0) {
+			status = -ENOTCONN;	/* Don't retry */
+			goto loop;
+		}
+
+		/* reset (non-USB 3.0 devices) and get descriptor */
+		usb_lock_port(port_dev);
+		status = hub_port_init(hub, udev, port1, i);
+		usb_unlock_port(port_dev);
+		if (status < 0)
+			goto loop;
+
+		usb_detect_quirks(udev);
+		if (udev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(1000);
+
+		/* consecutive bus-powered hubs aren't reliable; they can
+		 * violate the voltage drop budget.  if the new child has
+		 * a "powered" LED, users should notice we didn't enable it
+		 * (without reading syslog), even without per-port LEDs
+		 * on the parent.
+		 */
+		if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
+				&& udev->bus_mA <= unit_load) {
+			u16	devstat;
+
+			status = usb_get_status(udev, USB_RECIP_DEVICE, 0,
+					&devstat);
+			if (status) {
+				dev_dbg(&udev->dev, "get status %d ?\n", status);
+				goto loop_disable;
+			}
+			if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+				dev_err(&udev->dev,
+					"can't connect bus-powered hub "
+					"to this port\n");
+				if (hub->has_indicators) {
+					hub->indicator[port1-1] =
+						INDICATOR_AMBER_BLINK;
+					queue_delayed_work(
+						system_power_efficient_wq,
+						&hub->leds, 0);
+				}
+				status = -ENOTCONN;	/* Don't retry */
+				goto loop_disable;
+			}
+		}
+
+		/* check for devices running slower than they could */
+		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
+				&& udev->speed == USB_SPEED_FULL
+				&& highspeed_hubs != 0)
+			check_highspeed (hub, udev, port1);
+
+		/* Store the parent's children[] pointer.  At this point
+		 * udev becomes globally accessible, although presumably
+		 * no one will look at it until hdev is unlocked.
+		 */
+		status = 0;
+
+		mutex_lock(&usb_port_peer_mutex);
+
+		/* We mustn't add new devices if the parent hub has
+		 * been disconnected; we would race with the
+		 * recursively_mark_NOTATTACHED() routine.
+		 */
+		spin_lock_irq(&device_state_lock);
+		if (hdev->state == USB_STATE_NOTATTACHED)
+			status = -ENOTCONN;
+		else
+			port_dev->child = udev;
+		spin_unlock_irq(&device_state_lock);
+		mutex_unlock(&usb_port_peer_mutex);
+
+		/* Run it through the hoops (find a driver, etc) */
+		if (!status) {
+			status = usb_new_device(udev);
+			if (status) {
+				mutex_lock(&usb_port_peer_mutex);
+				spin_lock_irq(&device_state_lock);
+				port_dev->child = NULL;
+				spin_unlock_irq(&device_state_lock);
+				mutex_unlock(&usb_port_peer_mutex);
+			} else {
+				if (hcd->usb_phy && !hdev->parent)
+					usb_phy_notify_connect(hcd->usb_phy,
+							udev->speed);
+			}
+		}
+
+		if (status)
+			goto loop_disable;
+
+		status = hub_power_remaining(hub);
+		if (status)
+			dev_dbg(hub->intfdev, "%dmA power budget left\n", status);
+
+		return;
+
+loop_disable:
+		hub_port_disable(hub, port1, 1);
+loop:
+		usb_ep0_reinit(udev);
+		release_devnum(udev);
+		hub_free_dev(udev);
+		usb_put_dev(udev);
+		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
+			break;
+	}
+	if (hub->hdev->parent ||
+			!hcd->driver->port_handed_over ||
+			!(hcd->driver->port_handed_over)(hcd, port1)) {
+		if (status != -ENOTCONN && status != -ENODEV)
+			dev_err(&port_dev->dev,
+					"unable to enumerate USB device\n");
+	}
+
+done:
+	hub_port_disable(hub, port1, 1);
+	if (hcd->driver->relinquish_port && !hub->hdev->parent)
+		hcd->driver->relinquish_port(hcd, port1);
+
+}
+
+/* Handle physical or logical connection change events.
+ * This routine is called when:
+ *	a port connection-change occurs;
+ *	a port enable-change occurs (often caused by EMI);
+ *	usb_reset_and_verify_device() encounters changed descriptors (as from
+ *		a firmware download)
+ * caller already locked the hub
+ */
+static void hub_port_connect_change(struct usb_hub *hub, int port1,
+					u16 portstatus, u16 portchange)
+		__must_hold(&port_dev->status_lock)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	int status = -ENODEV;
+
+	dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus,
+			portchange, portspeed(hub, portstatus));
+
+	if (hub->has_indicators) {
+		set_port_led(hub, port1, HUB_LED_AUTO);
+		hub->indicator[port1-1] = INDICATOR_AUTO;
+	}
+
+#ifdef	CONFIG_USB_OTG
+	/* during HNP, don't repeat the debounce */
+	if (hub->hdev->bus->is_b_host)
+		portchange &= ~(USB_PORT_STAT_C_CONNECTION |
+				USB_PORT_STAT_C_ENABLE);
+#endif
+
+	/* Try to resuscitate an existing device */
+	if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
+			udev->state != USB_STATE_NOTATTACHED) {
+		if (portstatus & USB_PORT_STAT_ENABLE) {
+			status = 0;		/* Nothing to do */
+#ifdef CONFIG_PM
+		} else if (udev->state == USB_STATE_SUSPENDED &&
+				udev->persist_enabled) {
+			/* For a suspended device, treat this as a
+			 * remote wakeup event.
+			 */
+			usb_unlock_port(port_dev);
+			status = usb_remote_wakeup(udev);
+			usb_lock_port(port_dev);
+#endif
+		} else {
+			/* Don't resuscitate */;
+		}
+	}
+	clear_bit(port1, hub->change_bits);
+
+	/* successfully revalidated the connection */
+	if (status == 0)
+		return;
+
+	usb_unlock_port(port_dev);
+	hub_port_connect(hub, port1, portstatus, portchange);
+	usb_lock_port(port_dev);
+}
+
+static void port_event(struct usb_hub *hub, int port1)
+		__must_hold(&port_dev->status_lock)
+{
+	int connect_change;
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *udev = port_dev->child;
+	struct usb_device *hdev = hub->hdev;
+	u16 portstatus, portchange;
+
+	connect_change = test_bit(port1, hub->change_bits);
+	clear_bit(port1, hub->event_bits);
+	clear_bit(port1, hub->wakeup_bits);
+
+	if (hub_port_status(hub, port1, &portstatus, &portchange) < 0)
+		return;
+
+	if (portchange & USB_PORT_STAT_C_CONNECTION) {
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+		connect_change = 1;
+	}
+
+	if (portchange & USB_PORT_STAT_C_ENABLE) {
+		if (!connect_change)
+			dev_dbg(&port_dev->dev, "enable change, status %08x\n",
+					portstatus);
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+
+		/*
+		 * EM interference sometimes causes badly shielded USB devices
+		 * to be shutdown by the hub, this hack enables them again.
+		 * Works at least with mouse driver.
+		 */
+		if (!(portstatus & USB_PORT_STAT_ENABLE)
+		    && !connect_change && udev) {
+			dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n");
+			connect_change = 1;
+		}
+	}
+
+	if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+		u16 status = 0, unused;
+
+		dev_dbg(&port_dev->dev, "over-current change\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_OVER_CURRENT);
+		msleep(100);	/* Cool down */
+		hub_power_on(hub, true);
+		hub_port_status(hub, port1, &status, &unused);
+		if (status & USB_PORT_STAT_OVERCURRENT)
+			dev_err(&port_dev->dev, "over-current condition\n");
+	}
+
+	if (portchange & USB_PORT_STAT_C_RESET) {
+		dev_dbg(&port_dev->dev, "reset change\n");
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET);
+	}
+	if ((portchange & USB_PORT_STAT_C_BH_RESET)
+	    && hub_is_superspeed(hdev)) {
+		dev_dbg(&port_dev->dev, "warm reset change\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_BH_PORT_RESET);
+	}
+	if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+		dev_dbg(&port_dev->dev, "link state change\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_PORT_LINK_STATE);
+	}
+	if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
+		dev_warn(&port_dev->dev, "config error\n");
+		usb_clear_port_feature(hdev, port1,
+				USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
+	}
+
+	/* skip port actions that require the port to be powered on */
+	if (!pm_runtime_active(&port_dev->dev))
+		return;
+
+	if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange))
+		connect_change = 1;
+
+	/*
+	 * Warm reset a USB3 protocol port if it's in
+	 * SS.Inactive state.
+	 */
+	if (hub_port_warm_reset_required(hub, port1, portstatus)) {
+		dev_dbg(&port_dev->dev, "do warm reset\n");
+		if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION)
+				|| udev->state == USB_STATE_NOTATTACHED) {
+			if (hub_port_reset(hub, port1, NULL,
+					HUB_BH_RESET_TIME, true) < 0)
+				hub_port_disable(hub, port1, 1);
+		} else {
+			usb_unlock_port(port_dev);
+			usb_lock_device(udev);
+			usb_reset_device(udev);
+			usb_unlock_device(udev);
+			usb_lock_port(port_dev);
+			connect_change = 0;
+		}
+	}
+
+	if (connect_change)
+		hub_port_connect_change(hub, port1, portstatus, portchange);
+}
+
+static void hub_event(struct work_struct *work)
+{
+	struct usb_device *hdev;
+	struct usb_interface *intf;
+	struct usb_hub *hub;
+	struct device *hub_dev;
+	u16 hubstatus;
+	u16 hubchange;
+	int i, ret;
+
+	hub = container_of(work, struct usb_hub, events);
+	hdev = hub->hdev;
+	hub_dev = hub->intfdev;
+	intf = to_usb_interface(hub_dev);
+
+	dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+			hdev->state, hdev->maxchild,
+			/* NOTE: expects max 15 ports... */
+			(u16) hub->change_bits[0],
+			(u16) hub->event_bits[0]);
+
+	/* Lock the device, then check to see if we were
+	 * disconnected while waiting for the lock to succeed. */
+	usb_lock_device(hdev);
+	if (unlikely(hub->disconnected))
+		goto out_hdev_lock;
+
+	/* If the hub has died, clean up after it */
+	if (hdev->state == USB_STATE_NOTATTACHED) {
+		hub->error = -ENODEV;
+		hub_quiesce(hub, HUB_DISCONNECT);
+		goto out_hdev_lock;
+	}
+
+	/* Autoresume */
+	ret = usb_autopm_get_interface(intf);
+	if (ret) {
+		dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
+		goto out_hdev_lock;
+	}
+
+	/* If this is an inactive hub, do nothing */
+	if (hub->quiescing)
+		goto out_autopm;
+
+	if (hub->error) {
+		dev_dbg(hub_dev, "resetting for error %d\n", hub->error);
+
+		ret = usb_reset_device(hdev);
+		if (ret) {
+			dev_dbg(hub_dev, "error resetting hub: %d\n", ret);
+			goto out_autopm;
+		}
+
+		hub->nerrors = 0;
+		hub->error = 0;
+	}
+
+	/* deal with port status changes */
+	for (i = 1; i <= hdev->maxchild; i++) {
+		struct usb_port *port_dev = hub->ports[i - 1];
+
+		if (test_bit(i, hub->event_bits)
+				|| test_bit(i, hub->change_bits)
+				|| test_bit(i, hub->wakeup_bits)) {
+			/*
+			 * The get_noresume and barrier ensure that if
+			 * the port was in the process of resuming, we
+			 * flush that work and keep the port active for
+			 * the duration of the port_event().  However,
+			 * if the port is runtime pm suspended
+			 * (powered-off), we leave it in that state, run
+			 * an abbreviated port_event(), and move on.
+			 */
+			pm_runtime_get_noresume(&port_dev->dev);
+			pm_runtime_barrier(&port_dev->dev);
+			usb_lock_port(port_dev);
+			port_event(hub, i);
+			usb_unlock_port(port_dev);
+			pm_runtime_put_sync(&port_dev->dev);
+		}
+	}
+
+	/* deal with hub status changes */
+	if (test_and_clear_bit(0, hub->event_bits) == 0)
+		;	/* do nothing */
+	else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
+		dev_err(hub_dev, "get_hub_status failed\n");
+	else {
+		if (hubchange & HUB_CHANGE_LOCAL_POWER) {
+			dev_dbg(hub_dev, "power change\n");
+			clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
+			if (hubstatus & HUB_STATUS_LOCAL_POWER)
+				/* FIXME: Is this always true? */
+				hub->limited_power = 1;
+			else
+				hub->limited_power = 0;
+		}
+		if (hubchange & HUB_CHANGE_OVERCURRENT) {
+			u16 status = 0;
+			u16 unused;
+
+			dev_dbg(hub_dev, "over-current change\n");
+			clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+			msleep(500);	/* Cool down */
+			hub_power_on(hub, true);
+			hub_hub_status(hub, &status, &unused);
+			if (status & HUB_STATUS_OVERCURRENT)
+				dev_err(hub_dev, "over-current condition\n");
+		}
+	}
+
+out_autopm:
+	/* Balance the usb_autopm_get_interface() above */
+	usb_autopm_put_interface_no_suspend(intf);
+out_hdev_lock:
+	usb_unlock_device(hdev);
+
+	/* Balance the stuff in kick_hub_wq() and allow autosuspend */
+	usb_autopm_put_interface(intf);
+	kref_put(&hub->kref, hub_release);
+}
+
+static const struct usb_device_id hub_id_table[] = {
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_GENESYS_LOGIC,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
+      .bDeviceClass = USB_CLASS_HUB},
+    { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
+      .bInterfaceClass = USB_CLASS_HUB},
+    { }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, hub_id_table);
+
+static struct usb_driver hub_driver = {
+	.name =		"hub",
+	.probe =	hub_probe,
+	.disconnect =	hub_disconnect,
+	.suspend =	hub_suspend,
+	.resume =	hub_resume,
+	.reset_resume =	hub_reset_resume,
+	.pre_reset =	hub_pre_reset,
+	.post_reset =	hub_post_reset,
+	.unlocked_ioctl = hub_ioctl,
+	.id_table =	hub_id_table,
+	.supports_autosuspend =	1,
+};
+
+int usb_hub_init(void)
+{
+	if (usb_register(&hub_driver) < 0) {
+		printk(KERN_ERR "%s: can't register hub driver\n",
+			usbcore_name);
+		return -1;
+	}
+
+	/*
+	 * The workqueue needs to be freezable to avoid interfering with
+	 * USB-PERSIST port handover. Otherwise it might see that a full-speed
+	 * device was gone before the EHCI controller had handed its port
+	 * over to the companion full-speed controller.
+	 */
+	hub_wq = alloc_workqueue("usb_hub_wq", WQ_FREEZABLE, 0);
+	if (hub_wq)
+		return 0;
+
+	/* Fall through if kernel_thread failed */
+	usb_deregister(&hub_driver);
+	pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name);
+
+	return -1;
+}
+
+void usb_hub_cleanup(void)
+{
+	destroy_workqueue(hub_wq);
+
+	/*
+	 * Hub resources are freed for us by usb_deregister. It calls
+	 * usb_driver_purge on every device which in turn calls that
+	 * devices disconnect function if it is using this driver.
+	 * The hub_disconnect function takes care of releasing the
+	 * individual hub resources. -greg
+	 */
+	usb_deregister(&hub_driver);
+} /* usb_hub_cleanup() */
+
+static int descriptors_changed(struct usb_device *udev,
+		struct usb_device_descriptor *old_device_descriptor,
+		struct usb_host_bos *old_bos)
+{
+	int		changed = 0;
+	unsigned	index;
+	unsigned	serial_len = 0;
+	unsigned	len;
+	unsigned	old_length;
+	int		length;
+	char		*buf;
+
+	if (memcmp(&udev->descriptor, old_device_descriptor,
+			sizeof(*old_device_descriptor)) != 0)
+		return 1;
+
+	if ((old_bos && !udev->bos) || (!old_bos && udev->bos))
+		return 1;
+	if (udev->bos) {
+		len = le16_to_cpu(udev->bos->desc->wTotalLength);
+		if (len != le16_to_cpu(old_bos->desc->wTotalLength))
+			return 1;
+		if (memcmp(udev->bos->desc, old_bos->desc, len))
+			return 1;
+	}
+
+	/* Since the idVendor, idProduct, and bcdDevice values in the
+	 * device descriptor haven't changed, we will assume the
+	 * Manufacturer and Product strings haven't changed either.
+	 * But the SerialNumber string could be different (e.g., a
+	 * different flash card of the same brand).
+	 */
+	if (udev->serial)
+		serial_len = strlen(udev->serial) + 1;
+
+	len = serial_len;
+	for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
+		old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
+		len = max(len, old_length);
+	}
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL) {
+		dev_err(&udev->dev, "no mem to re-read configs after reset\n");
+		/* assume the worst */
+		return 1;
+	}
+	for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
+		old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
+		length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
+				old_length);
+		if (length != old_length) {
+			dev_dbg(&udev->dev, "config index %d, error %d\n",
+					index, length);
+			changed = 1;
+			break;
+		}
+		if (memcmp (buf, udev->rawdescriptors[index], old_length)
+				!= 0) {
+			dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
+				index,
+				((struct usb_config_descriptor *) buf)->
+					bConfigurationValue);
+			changed = 1;
+			break;
+		}
+	}
+
+	if (!changed && serial_len) {
+		length = usb_string(udev, udev->descriptor.iSerialNumber,
+				buf, serial_len);
+		if (length + 1 != serial_len) {
+			dev_dbg(&udev->dev, "serial string error %d\n",
+					length);
+			changed = 1;
+		} else if (memcmp(buf, udev->serial, length) != 0) {
+			dev_dbg(&udev->dev, "serial string changed\n");
+			changed = 1;
+		}
+	}
+
+	kfree(buf);
+	return changed;
+}
+
+/**
+ * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device
+ * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
+ *
+ * WARNING - don't use this routine to reset a composite device
+ * (one with multiple interfaces owned by separate drivers)!
+ * Use usb_reset_device() instead.
+ *
+ * Do a port reset, reassign the device's address, and establish its
+ * former operating configuration.  If the reset fails, or the device's
+ * descriptors change from their values before the reset, or the original
+ * configuration and altsettings cannot be restored, a flag will be set
+ * telling hub_wq to pretend the device has been disconnected and then
+ * re-connected.  All drivers will be unbound, and the device will be
+ * re-enumerated and probed all over again.
+ *
+ * Return: 0 if the reset succeeded, -ENODEV if the device has been
+ * flagged for logical disconnection, or some other negative error code
+ * if the reset wasn't even attempted.
+ *
+ * Note:
+ * The caller must own the device lock and the port lock, the latter is
+ * taken by usb_reset_device().  For example, it's safe to use
+ * usb_reset_device() from a driver probe() routine after downloading
+ * new firmware.  For calls that might not occur during probe(), drivers
+ * should lock the device using usb_lock_device_for_reset().
+ *
+ * Locking exception: This routine may also be called from within an
+ * autoresume handler.  Such usage won't conflict with other tasks
+ * holding the device lock because these tasks should always call
+ * usb_autopm_resume_device(), thereby preventing any unwanted
+ * autoresume.  The autoresume handler is expected to have already
+ * acquired the port lock before calling this routine.
+ */
+static int usb_reset_and_verify_device(struct usb_device *udev)
+{
+	struct usb_device		*parent_hdev = udev->parent;
+	struct usb_hub			*parent_hub;
+	struct usb_hcd			*hcd = bus_to_hcd(udev->bus);
+	struct usb_device_descriptor	descriptor = udev->descriptor;
+	struct usb_host_bos		*bos;
+	int				i, j, ret = 0;
+	int				port1 = udev->portnum;
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED) {
+		dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+				udev->state);
+		return -EINVAL;
+	}
+
+	if (!parent_hdev)
+		return -EISDIR;
+
+	parent_hub = usb_hub_to_struct_hub(parent_hdev);
+
+	/* Disable USB2 hardware LPM.
+	 * It will be re-enabled by the enumeration process.
+	 */
+	if (udev->usb2_hw_lpm_enabled == 1)
+		usb_set_usb2_hardware_lpm(udev, 0);
+
+	bos = udev->bos;
+	udev->bos = NULL;
+
+	/* Disable LPM and LTM while we reset the device and reinstall the alt
+	 * settings.  Device-initiated LPM settings, and system exit latency
+	 * settings are cleared when the device is reset, so we have to set
+	 * them up again.
+	 */
+	ret = usb_unlocked_disable_lpm(udev);
+	if (ret) {
+		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
+		goto re_enumerate;
+	}
+	ret = usb_disable_ltm(udev);
+	if (ret) {
+		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
+				__func__);
+		goto re_enumerate;
+	}
+
+	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
+
+		/* ep0 maxpacket size may change; let the HCD know about it.
+		 * Other endpoints will be handled by re-enumeration. */
+		usb_ep0_reinit(udev);
+		ret = hub_port_init(parent_hub, udev, port1, i);
+		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
+			break;
+	}
+
+	if (ret < 0)
+		goto re_enumerate;
+
+	/* Device might have changed firmware (DFU or similar) */
+	if (descriptors_changed(udev, &descriptor, bos)) {
+		dev_info(&udev->dev, "device firmware changed\n");
+		udev->descriptor = descriptor;	/* for disconnect() calls */
+		goto re_enumerate;
+	}
+
+	/* Restore the device's previous configuration */
+	if (!udev->actconfig)
+		goto done;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
+	if (ret < 0) {
+		dev_warn(&udev->dev,
+				"Busted HC?  Not enough HCD resources for "
+				"old configuration.\n");
+		mutex_unlock(hcd->bandwidth_mutex);
+		goto re_enumerate;
+	}
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_CONFIGURATION, 0,
+			udev->actconfig->desc.bConfigurationValue, 0,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&udev->dev,
+			"can't restore configuration #%d (error=%d)\n",
+			udev->actconfig->desc.bConfigurationValue, ret);
+		mutex_unlock(hcd->bandwidth_mutex);
+		goto re_enumerate;
+	}
+	mutex_unlock(hcd->bandwidth_mutex);
+	usb_set_device_state(udev, USB_STATE_CONFIGURED);
+
+	/* Put interfaces back into the same altsettings as before.
+	 * Don't bother to send the Set-Interface request for interfaces
+	 * that were already in altsetting 0; besides being unnecessary,
+	 * many devices can't handle it.  Instead just reset the host-side
+	 * endpoint state.
+	 */
+	for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+		struct usb_host_config *config = udev->actconfig;
+		struct usb_interface *intf = config->interface[i];
+		struct usb_interface_descriptor *desc;
+
+		desc = &intf->cur_altsetting->desc;
+		if (desc->bAlternateSetting == 0) {
+			usb_disable_interface(udev, intf, true);
+			usb_enable_interface(udev, intf, true);
+			ret = 0;
+		} else {
+			/* Let the bandwidth allocation function know that this
+			 * device has been reset, and it will have to use
+			 * alternate setting 0 as the current alternate setting.
+			 */
+			intf->resetting_device = 1;
+			ret = usb_set_interface(udev, desc->bInterfaceNumber,
+					desc->bAlternateSetting);
+			intf->resetting_device = 0;
+		}
+		if (ret < 0) {
+			dev_err(&udev->dev, "failed to restore interface %d "
+				"altsetting %d (error=%d)\n",
+				desc->bInterfaceNumber,
+				desc->bAlternateSetting,
+				ret);
+			goto re_enumerate;
+		}
+		/* Resetting also frees any allocated streams */
+		for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++)
+			intf->cur_altsetting->endpoint[j].streams = 0;
+	}
+
+done:
+	/* Now that the alt settings are re-installed, enable LTM and LPM. */
+	usb_set_usb2_hardware_lpm(udev, 1);
+	usb_unlocked_enable_lpm(udev);
+	usb_enable_ltm(udev);
+	usb_release_bos_descriptor(udev);
+	udev->bos = bos;
+	return 0;
+
+re_enumerate:
+	/* LPM state doesn't matter when we're about to destroy the device. */
+	hub_port_logical_disconnect(parent_hub, port1);
+	usb_release_bos_descriptor(udev);
+	udev->bos = bos;
+	return -ENODEV;
+}
+
+/**
+ * usb_reset_device - warn interface drivers and perform a USB port reset
+ * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
+ *
+ * Warns all drivers bound to registered interfaces (using their pre_reset
+ * method), performs the port reset, and then lets the drivers know that
+ * the reset is over (using their post_reset method).
+ *
+ * Return: The same as for usb_reset_and_verify_device().
+ *
+ * Note:
+ * The caller must own the device lock.  For example, it's safe to use
+ * this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
+ *
+ * If an interface is currently being probed or disconnected, we assume
+ * its driver knows how to handle resets.  For all other interfaces,
+ * if the driver doesn't have pre_reset and post_reset methods then
+ * we attempt to unbind it and rebind afterward.
+ */
+int usb_reset_device(struct usb_device *udev)
+{
+	int ret;
+	int i;
+	unsigned int noio_flag;
+	struct usb_port *port_dev;
+	struct usb_host_config *config = udev->actconfig;
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+	if (udev->state == USB_STATE_NOTATTACHED ||
+			udev->state == USB_STATE_SUSPENDED) {
+		dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+				udev->state);
+		return -EINVAL;
+	}
+
+	if (!udev->parent) {
+		/* this requires hcd-specific logic; see ohci_restart() */
+		dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
+		return -EISDIR;
+	}
+
+	port_dev = hub->ports[udev->portnum - 1];
+
+	/*
+	 * Don't allocate memory with GFP_KERNEL in current
+	 * context to avoid possible deadlock if usb mass
+	 * storage interface or usbnet interface(iSCSI case)
+	 * is included in current configuration. The easist
+	 * approach is to do it for every device reset,
+	 * because the device 'memalloc_noio' flag may have
+	 * not been set before reseting the usb device.
+	 */
+	noio_flag = memalloc_noio_save();
+
+	/* Prevent autosuspend during the reset */
+	usb_autoresume_device(udev);
+
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			struct usb_interface *cintf = config->interface[i];
+			struct usb_driver *drv;
+			int unbind = 0;
+
+			if (cintf->dev.driver) {
+				drv = to_usb_driver(cintf->dev.driver);
+				if (drv->pre_reset && drv->post_reset)
+					unbind = (drv->pre_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					unbind = 1;
+				if (unbind)
+					usb_forced_unbind_intf(cintf);
+			}
+		}
+	}
+
+	usb_lock_port(port_dev);
+	ret = usb_reset_and_verify_device(udev);
+	usb_unlock_port(port_dev);
+
+	if (config) {
+		for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
+			struct usb_interface *cintf = config->interface[i];
+			struct usb_driver *drv;
+			int rebind = cintf->needs_binding;
+
+			if (!rebind && cintf->dev.driver) {
+				drv = to_usb_driver(cintf->dev.driver);
+				if (drv->post_reset)
+					rebind = (drv->post_reset)(cintf);
+				else if (cintf->condition ==
+						USB_INTERFACE_BOUND)
+					rebind = 1;
+				if (rebind)
+					cintf->needs_binding = 1;
+			}
+		}
+		usb_unbind_and_rebind_marked_interfaces(udev);
+	}
+
+	usb_autosuspend_device(udev);
+	memalloc_noio_restore(noio_flag);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_reset_device);
+
+
+/**
+ * usb_queue_reset_device - Reset a USB device from an atomic context
+ * @iface: USB interface belonging to the device to reset
+ *
+ * This function can be used to reset a USB device from an atomic
+ * context, where usb_reset_device() won't work (as it blocks).
+ *
+ * Doing a reset via this method is functionally equivalent to calling
+ * usb_reset_device(), except for the fact that it is delayed to a
+ * workqueue. This means that any drivers bound to other interfaces
+ * might be unbound, as well as users from usbfs in user space.
+ *
+ * Corner cases:
+ *
+ * - Scheduling two resets at the same time from two different drivers
+ *   attached to two different interfaces of the same device is
+ *   possible; depending on how the driver attached to each interface
+ *   handles ->pre_reset(), the second reset might happen or not.
+ *
+ * - If the reset is delayed so long that the interface is unbound from
+ *   its driver, the reset will be skipped.
+ *
+ * - This function can be called during .probe().  It can also be called
+ *   during .disconnect(), but doing so is pointless because the reset
+ *   will not occur.  If you really want to reset the device during
+ *   .disconnect(), call usb_reset_device() directly -- but watch out
+ *   for nested unbinding issues!
+ */
+void usb_queue_reset_device(struct usb_interface *iface)
+{
+	if (schedule_work(&iface->reset_ws))
+		usb_get_intf(iface);
+}
+EXPORT_SYMBOL_GPL(usb_queue_reset_device);
+
+/**
+ * usb_hub_find_child - Get the pointer of child device
+ * attached to the port which is specified by @port1.
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num to indicate which port the child device
+ *	is attached to.
+ *
+ * USB drivers call this function to get hub's child device
+ * pointer.
+ *
+ * Return: %NULL if input param is invalid and
+ * child's usb_device pointer if non-NULL.
+ */
+struct usb_device *usb_hub_find_child(struct usb_device *hdev,
+		int port1)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (port1 < 1 || port1 > hdev->maxchild)
+		return NULL;
+	return hub->ports[port1 - 1]->child;
+}
+EXPORT_SYMBOL_GPL(usb_hub_find_child);
+
+void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	enum usb_port_connect_type connect_type;
+	int i;
+
+	if (!hub)
+		return;
+
+	if (!hub_is_superspeed(hdev)) {
+		for (i = 1; i <= hdev->maxchild; i++) {
+			struct usb_port *port_dev = hub->ports[i - 1];
+
+			connect_type = port_dev->connect_type;
+			if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+				u8 mask = 1 << (i%8);
+
+				if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) {
+					dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
+					desc->u.hs.DeviceRemovable[i/8]	|= mask;
+				}
+			}
+		}
+	} else {
+		u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable);
+
+		for (i = 1; i <= hdev->maxchild; i++) {
+			struct usb_port *port_dev = hub->ports[i - 1];
+
+			connect_type = port_dev->connect_type;
+			if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+				u16 mask = 1 << i;
+
+				if (!(port_removable & mask)) {
+					dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
+					port_removable |= mask;
+				}
+			}
+		}
+
+		desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
+	}
+}
+
+#ifdef CONFIG_ACPI
+/**
+ * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ *
+ * Return: Port's acpi handle if successful, %NULL if params are
+ * invalid.
+ */
+acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+
+	if (!hub)
+		return NULL;
+
+	return ACPI_HANDLE(&hub->ports[port1 - 1]->dev);
+}
+#endif
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
new file mode 100644
index 000000000..688817fb3
--- /dev/null
+++ b/drivers/usb/core/hub.h
@@ -0,0 +1,158 @@
+/*
+ * usb hub driver head file
+ *
+ * Copyright (C) 1999 Linus Torvalds
+ * Copyright (C) 1999 Johannes Erdfelt
+ * Copyright (C) 1999 Gregory P. Smith
+ * Copyright (C) 2001 Brad Hards (bhards@bigpond.net.au)
+ * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com)
+ *
+ *  move struct usb_hub to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/ch11.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+struct usb_hub {
+	struct device		*intfdev;	/* the "interface" device */
+	struct usb_device	*hdev;
+	struct kref		kref;
+	struct urb		*urb;		/* for interrupt polling pipe */
+
+	/* buffer for urb ... with extra space in case of babble */
+	u8			(*buffer)[8];
+	union {
+		struct usb_hub_status	hub;
+		struct usb_port_status	port;
+	}			*status;	/* buffer for status reports */
+	struct mutex		status_mutex;	/* for the status buffer */
+
+	int			error;		/* last reported error */
+	int			nerrors;	/* track consecutive errors */
+
+	unsigned long		event_bits[1];	/* status change bitmask */
+	unsigned long		change_bits[1];	/* ports with logical connect
+							status change */
+	unsigned long		removed_bits[1]; /* ports with a "removed"
+							device present */
+	unsigned long		wakeup_bits[1];	/* ports that have signaled
+							remote wakeup */
+	unsigned long		power_bits[1]; /* ports that are powered */
+	unsigned long		child_usage_bits[1]; /* ports powered on for
+							children */
+	unsigned long		warm_reset_bits[1]; /* ports requesting warm
+							reset recovery */
+#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
+#error event_bits[] is too short!
+#endif
+
+	struct usb_hub_descriptor *descriptor;	/* class descriptor */
+	struct usb_tt		tt;		/* Transaction Translator */
+
+	unsigned		mA_per_port;	/* current for each child */
+#ifdef	CONFIG_PM
+	unsigned		wakeup_enabled_descendants;
+#endif
+
+	unsigned		limited_power:1;
+	unsigned		quiescing:1;
+	unsigned		disconnected:1;
+	unsigned		in_reset:1;
+
+	unsigned		quirk_check_port_auto_suspend:1;
+
+	unsigned		has_indicators:1;
+	u8			indicator[USB_MAXCHILDREN];
+	struct delayed_work	leds;
+	struct delayed_work	init_work;
+	struct work_struct      events;
+	struct usb_port		**ports;
+};
+
+/**
+ * struct usb port - kernel's representation of a usb port
+ * @child: usb device attached to the port
+ * @dev: generic device interface
+ * @port_owner: port's owner
+ * @peer: related usb2 and usb3 ports (share the same connector)
+ * @req: default pm qos request for hubs without port power control
+ * @connect_type: port's connect type
+ * @location: opaque representation of platform connector location
+ * @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
+ * @portnum: port index num based one
+ * @is_superspeed cache super-speed status
+ */
+struct usb_port {
+	struct usb_device *child;
+	struct device dev;
+	struct usb_dev_state *port_owner;
+	struct usb_port *peer;
+	struct dev_pm_qos_request *req;
+	enum usb_port_connect_type connect_type;
+	usb_port_location_t location;
+	struct mutex status_lock;
+	u8 portnum;
+	unsigned int is_superspeed:1;
+};
+
+#define to_usb_port(_dev) \
+	container_of(_dev, struct usb_port, dev)
+
+extern int usb_hub_create_port_device(struct usb_hub *hub,
+		int port1);
+extern void usb_hub_remove_port_device(struct usb_hub *hub,
+		int port1);
+extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
+		int port1, bool set);
+extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
+extern int hub_port_debounce(struct usb_hub *hub, int port1,
+		bool must_be_connected);
+extern int usb_clear_port_feature(struct usb_device *hdev,
+		int port1, int feature);
+
+static inline bool hub_is_port_power_switchable(struct usb_hub *hub)
+{
+	__le16 hcs;
+
+	if (!hub)
+		return false;
+	hcs = hub->descriptor->wHubCharacteristics;
+	return (le16_to_cpu(hcs) & HUB_CHAR_LPSM) < HUB_CHAR_NO_LPSM;
+}
+
+static inline int hub_is_superspeed(struct usb_device *hdev)
+{
+	return hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS;
+}
+
+static inline unsigned hub_power_on_good_delay(struct usb_hub *hub)
+{
+	unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
+
+	/* Wait at least 100 msec for power to become stable */
+	return max(delay, 100U);
+}
+
+static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
+		int port1)
+{
+	return hub_port_debounce(hub, port1, true);
+}
+
+static inline int hub_port_debounce_be_stable(struct usb_hub *hub,
+		int port1)
+{
+	return hub_port_debounce(hub, port1, false);
+}
+
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
new file mode 100644
index 000000000..f368d2053
--- /dev/null
+++ b/drivers/usb/core/message.c
@@ -0,0 +1,1992 @@
+/*
+ * message.c - synchronous message handling
+ */
+
+#include <linux/pci.h>	/* for scatterlist macros */
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/nls.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
+#include <asm/byteorder.h>
+
+#include "usb.h"
+
+static void cancel_async_set_config(struct usb_device *udev);
+
+struct api_context {
+	struct completion	done;
+	int			status;
+};
+
+static void usb_api_blocking_completion(struct urb *urb)
+{
+	struct api_context *ctx = urb->context;
+
+	ctx->status = urb->status;
+	complete(&ctx->done);
+}
+
+
+/*
+ * Starts urb and waits for completion or timeout. Note that this call
+ * is NOT interruptible. Many device driver i/o requests should be
+ * interruptible and therefore these drivers should implement their
+ * own interruptible routines.
+ */
+static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
+{
+	struct api_context ctx;
+	unsigned long expire;
+	int retval;
+
+	init_completion(&ctx.done);
+	urb->context = &ctx;
+	urb->actual_length = 0;
+	retval = usb_submit_urb(urb, GFP_NOIO);
+	if (unlikely(retval))
+		goto out;
+
+	expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT;
+	if (!wait_for_completion_timeout(&ctx.done, expire)) {
+		usb_kill_urb(urb);
+		retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status);
+
+		dev_dbg(&urb->dev->dev,
+			"%s timed out on ep%d%s len=%u/%u\n",
+			current->comm,
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
+			urb->actual_length,
+			urb->transfer_buffer_length);
+	} else
+		retval = ctx.status;
+out:
+	if (actual_length)
+		*actual_length = urb->actual_length;
+
+	usb_free_urb(urb);
+	return retval;
+}
+
+/*-------------------------------------------------------------------*/
+/* returns status (negative) or length (positive) */
+static int usb_internal_control_msg(struct usb_device *usb_dev,
+				    unsigned int pipe,
+				    struct usb_ctrlrequest *cmd,
+				    void *data, int len, int timeout)
+{
+	struct urb *urb;
+	int retv;
+	int length;
+
+	urb = usb_alloc_urb(0, GFP_NOIO);
+	if (!urb)
+		return -ENOMEM;
+
+	usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data,
+			     len, usb_api_blocking_completion, NULL);
+
+	retv = usb_start_wait_urb(urb, timeout, &length);
+	if (retv < 0)
+		return retv;
+	else
+		return length;
+}
+
+/**
+ * usb_control_msg - Builds a control urb, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ *	out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple control message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler.  If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb().
+ * If a thread in your driver uses this call, make sure your disconnect()
+ * method can wait for it to complete.  Since you don't have a handle on the
+ * URB used, you can't cancel the request.
+ *
+ * Return: If successful, the number of bytes transferred. Otherwise, a negative
+ * error number.
+ */
+int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
+		    __u8 requesttype, __u16 value, __u16 index, void *data,
+		    __u16 size, int timeout)
+{
+	struct usb_ctrlrequest *dr;
+	int ret;
+
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	if (!dr)
+		return -ENOMEM;
+
+	dr->bRequestType = requesttype;
+	dr->bRequest = request;
+	dr->wValue = cpu_to_le16(value);
+	dr->wIndex = cpu_to_le16(index);
+	dr->wLength = cpu_to_le16(size);
+
+	ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout);
+
+	kfree(dr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg);
+
+/**
+ * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ *	in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ *	timing out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple interrupt message to a specified endpoint and
+ * waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler.  If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb() If a thread in your
+ * driver uses this call, make sure your disconnect() method can wait for it to
+ * complete.  Since you don't have a handle on the URB used, you can't cancel
+ * the request.
+ *
+ * Return:
+ * If successful, 0. Otherwise a negative error number. The number of actual
+ * bytes transferred will be stored in the @actual_length parameter.
+ */
+int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+		      void *data, int len, int *actual_length, int timeout)
+{
+	return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout);
+}
+EXPORT_SYMBOL_GPL(usb_interrupt_msg);
+
+/**
+ * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion
+ * @usb_dev: pointer to the usb device to send the message to
+ * @pipe: endpoint "pipe" to send the message to
+ * @data: pointer to the data to send
+ * @len: length in bytes of the data to send
+ * @actual_length: pointer to a location to put the actual length transferred
+ *	in bytes
+ * @timeout: time in msecs to wait for the message to complete before
+ *	timing out (if 0 the wait is forever)
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a simple bulk message to a specified endpoint
+ * and waits for the message to complete, or timeout.
+ *
+ * Don't use this function from within an interrupt context, like a bottom half
+ * handler.  If you need an asynchronous message, or need to send a message
+ * from within interrupt context, use usb_submit_urb() If a thread in your
+ * driver uses this call, make sure your disconnect() method can wait for it to
+ * complete.  Since you don't have a handle on the URB used, you can't cancel
+ * the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl,
+ * users are forced to abuse this routine by using it to submit URBs for
+ * interrupt endpoints.  We will take the liberty of creating an interrupt URB
+ * (with the default interval) if the target is an interrupt endpoint.
+ *
+ * Return:
+ * If successful, 0. Otherwise a negative error number. The number of actual
+ * bytes transferred will be stored in the @actual_length parameter.
+ *
+ */
+int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+		 void *data, int len, int *actual_length, int timeout)
+{
+	struct urb *urb;
+	struct usb_host_endpoint *ep;
+
+	ep = usb_pipe_endpoint(usb_dev, pipe);
+	if (!ep || len < 0)
+		return -EINVAL;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+			USB_ENDPOINT_XFER_INT) {
+		pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+		usb_fill_int_urb(urb, usb_dev, pipe, data, len,
+				usb_api_blocking_completion, NULL,
+				ep->desc.bInterval);
+	} else
+		usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
+				usb_api_blocking_completion, NULL);
+
+	return usb_start_wait_urb(urb, timeout, actual_length);
+}
+EXPORT_SYMBOL_GPL(usb_bulk_msg);
+
+/*-------------------------------------------------------------------*/
+
+static void sg_clean(struct usb_sg_request *io)
+{
+	if (io->urbs) {
+		while (io->entries--)
+			usb_free_urb(io->urbs[io->entries]);
+		kfree(io->urbs);
+		io->urbs = NULL;
+	}
+	io->dev = NULL;
+}
+
+static void sg_complete(struct urb *urb)
+{
+	struct usb_sg_request *io = urb->context;
+	int status = urb->status;
+
+	spin_lock(&io->lock);
+
+	/* In 2.5 we require hcds' endpoint queues not to progress after fault
+	 * reports, until the completion callback (this!) returns.  That lets
+	 * device driver code (like this routine) unlink queued urbs first,
+	 * if it needs to, since the HC won't work on them at all.  So it's
+	 * not possible for page N+1 to overwrite page N, and so on.
+	 *
+	 * That's only for "hard" faults; "soft" faults (unlinks) sometimes
+	 * complete before the HCD can get requests away from hardware,
+	 * though never during cleanup after a hard fault.
+	 */
+	if (io->status
+			&& (io->status != -ECONNRESET
+				|| status != -ECONNRESET)
+			&& urb->actual_length) {
+		dev_err(io->dev->bus->controller,
+			"dev %s ep%d%s scatterlist error %d/%d\n",
+			io->dev->devpath,
+			usb_endpoint_num(&urb->ep->desc),
+			usb_urb_dir_in(urb) ? "in" : "out",
+			status, io->status);
+		/* BUG (); */
+	}
+
+	if (io->status == 0 && status && status != -ECONNRESET) {
+		int i, found, retval;
+
+		io->status = status;
+
+		/* the previous urbs, and this one, completed already.
+		 * unlink pending urbs so they won't rx/tx bad data.
+		 * careful: unlink can sometimes be synchronous...
+		 */
+		spin_unlock(&io->lock);
+		for (i = 0, found = 0; i < io->entries; i++) {
+			if (!io->urbs[i] || !io->urbs[i]->dev)
+				continue;
+			if (found) {
+				retval = usb_unlink_urb(io->urbs[i]);
+				if (retval != -EINPROGRESS &&
+				    retval != -ENODEV &&
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
+					dev_err(&io->dev->dev,
+						"%s, unlink --> %d\n",
+						__func__, retval);
+			} else if (urb == io->urbs[i])
+				found = 1;
+		}
+		spin_lock(&io->lock);
+	}
+
+	/* on the last completion, signal usb_sg_wait() */
+	io->bytes += urb->actual_length;
+	io->count--;
+	if (!io->count)
+		complete(&io->complete);
+
+	spin_unlock(&io->lock);
+}
+
+
+/**
+ * usb_sg_init - initializes scatterlist-based bulk/interrupt I/O request
+ * @io: request block being initialized.  until usb_sg_wait() returns,
+ *	treat this as a pointer to an opaque block of memory,
+ * @dev: the usb device that will send or receive the data
+ * @pipe: endpoint "pipe" used to transfer the data
+ * @period: polling rate for interrupt endpoints, in frames or
+ * 	(for high speed endpoints) microframes; ignored for bulk
+ * @sg: scatterlist entries
+ * @nents: how many entries in the scatterlist
+ * @length: how many bytes to send from the scatterlist, or zero to
+ * 	send every byte identified in the list.
+ * @mem_flags: SLAB_* flags affecting memory allocations in this call
+ *
+ * This initializes a scatter/gather request, allocating resources such as
+ * I/O mappings and urb memory (except maybe memory used by USB controller
+ * drivers).
+ *
+ * The request must be issued using usb_sg_wait(), which waits for the I/O to
+ * complete (or to be canceled) and then cleans up all resources allocated by
+ * usb_sg_init().
+ *
+ * The request may be canceled with usb_sg_cancel(), either before or after
+ * usb_sg_wait() is called.
+ *
+ * Return: Zero for success, else a negative errno value.
+ */
+int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
+		unsigned pipe, unsigned	period, struct scatterlist *sg,
+		int nents, size_t length, gfp_t mem_flags)
+{
+	int i;
+	int urb_flags;
+	int use_sg;
+
+	if (!io || !dev || !sg
+			|| usb_pipecontrol(pipe)
+			|| usb_pipeisoc(pipe)
+			|| nents <= 0)
+		return -EINVAL;
+
+	spin_lock_init(&io->lock);
+	io->dev = dev;
+	io->pipe = pipe;
+
+	if (dev->bus->sg_tablesize > 0) {
+		use_sg = true;
+		io->entries = 1;
+	} else {
+		use_sg = false;
+		io->entries = nents;
+	}
+
+	/* initialize all the urbs we'll use */
+	io->urbs = kmalloc(io->entries * sizeof(*io->urbs), mem_flags);
+	if (!io->urbs)
+		goto nomem;
+
+	urb_flags = URB_NO_INTERRUPT;
+	if (usb_pipein(pipe))
+		urb_flags |= URB_SHORT_NOT_OK;
+
+	for_each_sg(sg, sg, io->entries, i) {
+		struct urb *urb;
+		unsigned len;
+
+		urb = usb_alloc_urb(0, mem_flags);
+		if (!urb) {
+			io->entries = i;
+			goto nomem;
+		}
+		io->urbs[i] = urb;
+
+		urb->dev = NULL;
+		urb->pipe = pipe;
+		urb->interval = period;
+		urb->transfer_flags = urb_flags;
+		urb->complete = sg_complete;
+		urb->context = io;
+		urb->sg = sg;
+
+		if (use_sg) {
+			/* There is no single transfer buffer */
+			urb->transfer_buffer = NULL;
+			urb->num_sgs = nents;
+
+			/* A length of zero means transfer the whole sg list */
+			len = length;
+			if (len == 0) {
+				struct scatterlist	*sg2;
+				int			j;
+
+				for_each_sg(sg, sg2, nents, j)
+					len += sg2->length;
+			}
+		} else {
+			/*
+			 * Some systems can't use DMA; they use PIO instead.
+			 * For their sakes, transfer_buffer is set whenever
+			 * possible.
+			 */
+			if (!PageHighMem(sg_page(sg)))
+				urb->transfer_buffer = sg_virt(sg);
+			else
+				urb->transfer_buffer = NULL;
+
+			len = sg->length;
+			if (length) {
+				len = min_t(size_t, len, length);
+				length -= len;
+				if (length == 0)
+					io->entries = i + 1;
+			}
+		}
+		urb->transfer_buffer_length = len;
+	}
+	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
+
+	/* transaction state */
+	io->count = io->entries;
+	io->status = 0;
+	io->bytes = 0;
+	init_completion(&io->complete);
+	return 0;
+
+nomem:
+	sg_clean(io);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_sg_init);
+
+/**
+ * usb_sg_wait - synchronously execute scatter/gather request
+ * @io: request block handle, as initialized with usb_sg_init().
+ * 	some fields become accessible when this call returns.
+ * Context: !in_interrupt ()
+ *
+ * This function blocks until the specified I/O operation completes.  It
+ * leverages the grouping of the related I/O requests to get good transfer
+ * rates, by queueing the requests.  At higher speeds, such queuing can
+ * significantly improve USB throughput.
+ *
+ * There are three kinds of completion for this function.
+ * (1) success, where io->status is zero.  The number of io->bytes
+ *     transferred is as requested.
+ * (2) error, where io->status is a negative errno value.  The number
+ *     of io->bytes transferred before the error is usually less
+ *     than requested, and can be nonzero.
+ * (3) cancellation, a type of error with status -ECONNRESET that
+ *     is initiated by usb_sg_cancel().
+ *
+ * When this function returns, all memory allocated through usb_sg_init() or
+ * this call will have been freed.  The request block parameter may still be
+ * passed to usb_sg_cancel(), or it may be freed.  It could also be
+ * reinitialized and then reused.
+ *
+ * Data Transfer Rates:
+ *
+ * Bulk transfers are valid for full or high speed endpoints.
+ * The best full speed data rate is 19 packets of 64 bytes each
+ * per frame, or 1216 bytes per millisecond.
+ * The best high speed data rate is 13 packets of 512 bytes each
+ * per microframe, or 52 KBytes per millisecond.
+ *
+ * The reason to use interrupt transfers through this API would most likely
+ * be to reserve high speed bandwidth, where up to 24 KBytes per millisecond
+ * could be transferred.  That capability is less useful for low or full
+ * speed interrupt endpoints, which allow at most one packet per millisecond,
+ * of at most 8 or 64 bytes (respectively).
+ *
+ * It is not necessary to call this function to reserve bandwidth for devices
+ * under an xHCI host controller, as the bandwidth is reserved when the
+ * configuration or interface alt setting is selected.
+ */
+void usb_sg_wait(struct usb_sg_request *io)
+{
+	int i;
+	int entries = io->entries;
+
+	/* queue the urbs.  */
+	spin_lock_irq(&io->lock);
+	i = 0;
+	while (i < entries && !io->status) {
+		int retval;
+
+		io->urbs[i]->dev = io->dev;
+		retval = usb_submit_urb(io->urbs[i], GFP_ATOMIC);
+
+		/* after we submit, let completions or cancellations fire;
+		 * we handshake using io->status.
+		 */
+		spin_unlock_irq(&io->lock);
+		switch (retval) {
+			/* maybe we retrying will recover */
+		case -ENXIO:	/* hc didn't queue this one */
+		case -EAGAIN:
+		case -ENOMEM:
+			retval = 0;
+			yield();
+			break;
+
+			/* no error? continue immediately.
+			 *
+			 * NOTE: to work better with UHCI (4K I/O buffer may
+			 * need 3K of TDs) it may be good to limit how many
+			 * URBs are queued at once; N milliseconds?
+			 */
+		case 0:
+			++i;
+			cpu_relax();
+			break;
+
+			/* fail any uncompleted urbs */
+		default:
+			io->urbs[i]->status = retval;
+			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
+				__func__, retval);
+			usb_sg_cancel(io);
+		}
+		spin_lock_irq(&io->lock);
+		if (retval && (io->status == 0 || io->status == -ECONNRESET))
+			io->status = retval;
+	}
+	io->count -= entries - i;
+	if (io->count == 0)
+		complete(&io->complete);
+	spin_unlock_irq(&io->lock);
+
+	/* OK, yes, this could be packaged as non-blocking.
+	 * So could the submit loop above ... but it's easier to
+	 * solve neither problem than to solve both!
+	 */
+	wait_for_completion(&io->complete);
+
+	sg_clean(io);
+}
+EXPORT_SYMBOL_GPL(usb_sg_wait);
+
+/**
+ * usb_sg_cancel - stop scatter/gather i/o issued by usb_sg_wait()
+ * @io: request block, initialized with usb_sg_init()
+ *
+ * This stops a request after it has been started by usb_sg_wait().
+ * It can also prevents one initialized by usb_sg_init() from starting,
+ * so that call just frees resources allocated to the request.
+ */
+void usb_sg_cancel(struct usb_sg_request *io)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&io->lock, flags);
+
+	/* shut everything down, if it didn't already */
+	if (!io->status) {
+		int i;
+
+		io->status = -ECONNRESET;
+		spin_unlock(&io->lock);
+		for (i = 0; i < io->entries; i++) {
+			int retval;
+
+			if (!io->urbs[i]->dev)
+				continue;
+			retval = usb_unlink_urb(io->urbs[i]);
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
+				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
+					__func__, retval);
+		}
+		spin_lock(&io->lock);
+	}
+	spin_unlock_irqrestore(&io->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_sg_cancel);
+
+/*-------------------------------------------------------------------*/
+
+/**
+ * usb_get_descriptor - issues a generic GET_DESCRIPTOR request
+ * @dev: the device whose descriptor is being retrieved
+ * @type: the descriptor type (USB_DT_*)
+ * @index: the number of the descriptor
+ * @buf: where to put the descriptor
+ * @size: how big is "buf"?
+ * Context: !in_interrupt ()
+ *
+ * Gets a USB descriptor.  Convenience functions exist to simplify
+ * getting some types of descriptors.  Use
+ * usb_get_string() or usb_string() for USB_DT_STRING.
+ * Device (USB_DT_DEVICE) and configuration descriptors (USB_DT_CONFIG)
+ * are part of the device structure.
+ * In addition to a number of USB-standard descriptors, some
+ * devices also use class-specific or vendor-specific descriptors.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: The number of bytes received on success, or else the status code
+ * returned by the underlying usb_control_msg() call.
+ */
+int usb_get_descriptor(struct usb_device *dev, unsigned char type,
+		       unsigned char index, void *buf, int size)
+{
+	int i;
+	int result;
+
+	memset(buf, 0, size);	/* Make sure we parse really received data */
+
+	for (i = 0; i < 3; ++i) {
+		/* retry on length 0 or error; some devices are flakey */
+		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+				(type << 8) + index, 0, buf, size,
+				USB_CTRL_GET_TIMEOUT);
+		if (result <= 0 && result != -ETIMEDOUT)
+			continue;
+		if (result > 1 && ((u8 *)buf)[1] != type) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(usb_get_descriptor);
+
+/**
+ * usb_get_string - gets a string descriptor
+ * @dev: the device whose string descriptor is being retrieved
+ * @langid: code for language chosen (from string descriptor zero)
+ * @index: the number of the descriptor
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ * Context: !in_interrupt ()
+ *
+ * Retrieves a string, encoded using UTF-16LE (Unicode, 16 bits per character,
+ * in little-endian byte order).
+ * The usb_string() function will often be a convenient way to turn
+ * these strings into kernel-printable form.
+ *
+ * Strings may be referenced in device, configuration, interface, or other
+ * descriptors, and could also be used in vendor-specific ways.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: The number of bytes received on success, or else the status code
+ * returned by the underlying usb_control_msg() call.
+ */
+static int usb_get_string(struct usb_device *dev, unsigned short langid,
+			  unsigned char index, void *buf, int size)
+{
+	int i;
+	int result;
+
+	for (i = 0; i < 3; ++i) {
+		/* retry on length 0 or stall; some devices are flakey */
+		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
+			(USB_DT_STRING << 8) + index, langid, buf, size,
+			USB_CTRL_GET_TIMEOUT);
+		if (result == 0 || result == -EPIPE)
+			continue;
+		if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
+	}
+	return result;
+}
+
+static void usb_try_string_workarounds(unsigned char *buf, int *length)
+{
+	int newlength, oldlength = *length;
+
+	for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
+		if (!isprint(buf[newlength]) || buf[newlength + 1])
+			break;
+
+	if (newlength > 2) {
+		buf[0] = newlength;
+		*length = newlength;
+	}
+}
+
+static int usb_string_sub(struct usb_device *dev, unsigned int langid,
+			  unsigned int index, unsigned char *buf)
+{
+	int rc;
+
+	/* Try to read the string descriptor by asking for the maximum
+	 * possible number of bytes */
+	if (dev->quirks & USB_QUIRK_STRING_FETCH_255)
+		rc = -EIO;
+	else
+		rc = usb_get_string(dev, langid, index, buf, 255);
+
+	/* If that failed try to read the descriptor length, then
+	 * ask for just that many bytes */
+	if (rc < 2) {
+		rc = usb_get_string(dev, langid, index, buf, 2);
+		if (rc == 2)
+			rc = usb_get_string(dev, langid, index, buf, buf[0]);
+	}
+
+	if (rc >= 2) {
+		if (!buf[0] && !buf[1])
+			usb_try_string_workarounds(buf, &rc);
+
+		/* There might be extra junk at the end of the descriptor */
+		if (buf[0] < rc)
+			rc = buf[0];
+
+		rc = rc - (rc & 1); /* force a multiple of two */
+	}
+
+	if (rc < 2)
+		rc = (rc < 0 ? rc : -EINVAL);
+
+	return rc;
+}
+
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+	int err;
+
+	if (dev->have_langid)
+		return 0;
+
+	if (dev->string_langid < 0)
+		return -EPIPE;
+
+	err = usb_string_sub(dev, 0, 0, tbuf);
+
+	/* If the string was reported but is malformed, default to english
+	 * (0x0409) */
+	if (err == -ENODATA || (err > 0 && err < 4)) {
+		dev->string_langid = 0x0409;
+		dev->have_langid = 1;
+		dev_err(&dev->dev,
+			"language id specifier not provided by device, defaulting to English\n");
+		return 0;
+	}
+
+	/* In case of all other errors, we assume the device is not able to
+	 * deal with strings at all. Set string_langid to -1 in order to
+	 * prevent any string to be retrieved from the device */
+	if (err < 0) {
+		dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+					err);
+		dev->string_langid = -1;
+		return -EPIPE;
+	}
+
+	/* always use the first langid listed */
+	dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+	dev->have_langid = 1;
+	dev_dbg(&dev->dev, "default language 0x%04x\n",
+				dev->string_langid);
+	return 0;
+}
+
+/**
+ * usb_string - returns UTF-8 version of a string descriptor
+ * @dev: the device whose string descriptor is being retrieved
+ * @index: the number of the descriptor
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ * Context: !in_interrupt ()
+ *
+ * This converts the UTF-16LE encoded strings returned by devices, from
+ * usb_get_string_descriptor(), to null-terminated UTF-8 encoded ones
+ * that are more usable in most kernel contexts.  Note that this function
+ * chooses strings in the first language supported by the device.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: length of the string (>= 0) or usb_control_msg status (< 0).
+ */
+int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
+{
+	unsigned char *tbuf;
+	int err;
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+	if (size <= 0 || !buf || !index)
+		return -EINVAL;
+	buf[0] = 0;
+	tbuf = kmalloc(256, GFP_NOIO);
+	if (!tbuf)
+		return -ENOMEM;
+
+	err = usb_get_langid(dev, tbuf);
+	if (err < 0)
+		goto errout;
+
+	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
+	if (err < 0)
+		goto errout;
+
+	size--;		/* leave room for trailing NULL char in output buffer */
+	err = utf16s_to_utf8s((wchar_t *) &tbuf[2], (err - 2) / 2,
+			UTF16_LITTLE_ENDIAN, buf, size);
+	buf[err] = 0;
+
+	if (tbuf[1] != USB_DT_STRING)
+		dev_dbg(&dev->dev,
+			"wrong descriptor type %02x for string %d (\"%s\")\n",
+			tbuf[1], index, buf);
+
+ errout:
+	kfree(tbuf);
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_string);
+
+/* one UTF-8-encoded 16-bit character has at most three bytes */
+#define MAX_USB_STRING_SIZE (127 * 3 + 1)
+
+/**
+ * usb_cache_string - read a string descriptor and cache it for later use
+ * @udev: the device whose string descriptor is being read
+ * @index: the descriptor index
+ *
+ * Return: A pointer to a kmalloc'ed buffer containing the descriptor string,
+ * or %NULL if the index is 0 or the string could not be read.
+ */
+char *usb_cache_string(struct usb_device *udev, int index)
+{
+	char *buf;
+	char *smallbuf = NULL;
+	int len;
+
+	if (index <= 0)
+		return NULL;
+
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
+	if (buf) {
+		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
+		if (len > 0) {
+			smallbuf = kmalloc(++len, GFP_NOIO);
+			if (!smallbuf)
+				return buf;
+			memcpy(smallbuf, buf, len);
+		}
+		kfree(buf);
+	}
+	return smallbuf;
+}
+
+/*
+ * usb_get_device_descriptor - (re)reads the device descriptor (usbcore)
+ * @dev: the device whose device descriptor is being updated
+ * @size: how much of the descriptor to read
+ * Context: !in_interrupt ()
+ *
+ * Updates the copy of the device descriptor stored in the device structure,
+ * which dedicates space for this purpose.
+ *
+ * Not exported, only for use by the core.  If drivers really want to read
+ * the device descriptor directly, they can call usb_get_descriptor() with
+ * type = USB_DT_DEVICE and index = 0.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: The number of bytes received on success, or else the status code
+ * returned by the underlying usb_control_msg() call.
+ */
+int usb_get_device_descriptor(struct usb_device *dev, unsigned int size)
+{
+	struct usb_device_descriptor *desc;
+	int ret;
+
+	if (size > sizeof(*desc))
+		return -EINVAL;
+	desc = kmalloc(sizeof(*desc), GFP_NOIO);
+	if (!desc)
+		return -ENOMEM;
+
+	ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, size);
+	if (ret >= 0)
+		memcpy(&dev->descriptor, desc, size);
+	kfree(desc);
+	return ret;
+}
+
+/**
+ * usb_get_status - issues a GET_STATUS call
+ * @dev: the device whose status is being checked
+ * @type: USB_RECIP_*; for device, interface, or endpoint
+ * @target: zero (for device), else interface or endpoint number
+ * @data: pointer to two bytes of bitmap data
+ * Context: !in_interrupt ()
+ *
+ * Returns device, interface, or endpoint status.  Normally only of
+ * interest to see if the device is self powered, or has enabled the
+ * remote wakeup facility; or whether a bulk or interrupt endpoint
+ * is halted ("stalled").
+ *
+ * Bits in these status bitmaps are set using the SET_FEATURE request,
+ * and cleared using the CLEAR_FEATURE request.  The usb_clear_halt()
+ * function should be used to clear halt ("stall") status.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Returns 0 and the status value in *@data (in host byte order) on success,
+ * or else the status code from the underlying usb_control_msg() call.
+ */
+int usb_get_status(struct usb_device *dev, int type, int target, void *data)
+{
+	int ret;
+	__le16 *status = kmalloc(sizeof(*status), GFP_KERNEL);
+
+	if (!status)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+		USB_REQ_GET_STATUS, USB_DIR_IN | type, 0, target, status,
+		sizeof(*status), USB_CTRL_GET_TIMEOUT);
+
+	if (ret == 2) {
+		*(u16 *) data = le16_to_cpu(*status);
+		ret = 0;
+	} else if (ret >= 0) {
+		ret = -EIO;
+	}
+	kfree(status);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_get_status);
+
+/**
+ * usb_clear_halt - tells device to clear endpoint halt/stall condition
+ * @dev: device whose endpoint is halted
+ * @pipe: endpoint "pipe" being cleared
+ * Context: !in_interrupt ()
+ *
+ * This is used to clear halt conditions for bulk and interrupt endpoints,
+ * as reported by URB completion status.  Endpoints that are halted are
+ * sometimes referred to as being "stalled".  Such endpoints are unable
+ * to transmit or receive data until the halt status is cleared.  Any URBs
+ * queued for such an endpoint should normally be unlinked by the driver
+ * before clearing the halt condition, as described in sections 5.7.5
+ * and 5.8.5 of the USB 2.0 spec.
+ *
+ * Note that control and isochronous endpoints don't halt, although control
+ * endpoints report "protocol stall" (for unsupported requests) using the
+ * same status code used to report a true stall.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Return: Zero on success, or else the status code returned by the
+ * underlying usb_control_msg() call.
+ */
+int usb_clear_halt(struct usb_device *dev, int pipe)
+{
+	int result;
+	int endp = usb_pipeendpoint(pipe);
+
+	if (usb_pipein(pipe))
+		endp |= USB_DIR_IN;
+
+	/* we don't care if it wasn't halted first. in fact some devices
+	 * (like some ibmcam model 1 units) seem to expect hosts to make
+	 * this request for iso endpoints, which can't halt!
+	 */
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+		USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+		USB_ENDPOINT_HALT, endp, NULL, 0,
+		USB_CTRL_SET_TIMEOUT);
+
+	/* don't un-halt or force to DATA0 except on success */
+	if (result < 0)
+		return result;
+
+	/* NOTE:  seems like Microsoft and Apple don't bother verifying
+	 * the clear "took", so some devices could lock up if you check...
+	 * such as the Hagiwara FlashGate DUAL.  So we won't bother.
+	 *
+	 * NOTE:  make sure the logic here doesn't diverge much from
+	 * the copy in usb-storage, for as long as we need two copies.
+	 */
+
+	usb_reset_endpoint(dev, endp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_clear_halt);
+
+static int create_intf_ep_devs(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	if (intf->ep_devs_created || intf->unregistering)
+		return 0;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		(void) usb_create_ep_devs(&intf->dev, &alt->endpoint[i], udev);
+	intf->ep_devs_created = 1;
+	return 0;
+}
+
+static void remove_intf_ep_devs(struct usb_interface *intf)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	if (!intf->ep_devs_created)
+		return;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		usb_remove_ep_devs(&alt->endpoint[i]);
+	intf->ep_devs_created = 0;
+}
+
+/**
+ * usb_disable_endpoint -- Disable an endpoint by address
+ * @dev: the device whose endpoint is being disabled
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
+ *
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
+ */
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (!dev)
+		return;
+
+	if (usb_endpoint_out(epaddr)) {
+		ep = dev->ep_out[epnum];
+		if (reset_hardware)
+			dev->ep_out[epnum] = NULL;
+	} else {
+		ep = dev->ep_in[epnum];
+		if (reset_hardware)
+			dev->ep_in[epnum] = NULL;
+	}
+	if (ep) {
+		ep->enabled = 0;
+		usb_hcd_flush_endpoint(dev, ep);
+		if (reset_hardware)
+			usb_hcd_disable_endpoint(dev, ep);
+	}
+}
+
+/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (usb_endpoint_out(epaddr))
+		ep = dev->ep_out[epnum];
+	else
+		ep = dev->ep_in[epnum];
+	if (ep)
+		usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
+ * usb_disable_interface -- Disable all endpoints for an interface
+ * @dev: the device whose interface is being disabled
+ * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
+ *
+ * Disables all the endpoints for the interface's current altsetting.
+ */
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+		bool reset_hardware)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+		usb_disable_endpoint(dev,
+				alt->endpoint[i].desc.bEndpointAddress,
+				reset_hardware);
+	}
+}
+
+/**
+ * usb_disable_device - Disable all the endpoints for a USB device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ *
+ * Disables all the device's endpoints, potentially including endpoint 0.
+ * Deallocates hcd/hardware state for the endpoints (nuking all or most
+ * pending urbs) and usbcore state for the interfaces, so that usbcore
+ * must usb_set_configuration() before any interfaces could be used.
+ */
+void usb_disable_device(struct usb_device *dev, int skip_ep0)
+{
+	int i;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+
+	/* getting rid of interfaces will disconnect
+	 * any drivers bound to them (a key side effect)
+	 */
+	if (dev->actconfig) {
+		/*
+		 * FIXME: In order to avoid self-deadlock involving the
+		 * bandwidth_mutex, we have to mark all the interfaces
+		 * before unregistering any of them.
+		 */
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++)
+			dev->actconfig->interface[i]->unregistering = 1;
+
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+			struct usb_interface	*interface;
+
+			/* remove this interface if it has been registered */
+			interface = dev->actconfig->interface[i];
+			if (!device_is_registered(&interface->dev))
+				continue;
+			dev_dbg(&dev->dev, "unregistering interface %s\n",
+				dev_name(&interface->dev));
+			remove_intf_ep_devs(interface);
+			device_del(&interface->dev);
+		}
+
+		/* Now that the interfaces are unbound, nobody should
+		 * try to access them.
+		 */
+		for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
+			put_device(&dev->actconfig->interface[i]->dev);
+			dev->actconfig->interface[i] = NULL;
+		}
+
+		if (dev->usb2_hw_lpm_enabled == 1)
+			usb_set_usb2_hardware_lpm(dev, 0);
+		usb_unlocked_disable_lpm(dev);
+		usb_disable_ltm(dev);
+
+		dev->actconfig = NULL;
+		if (dev->state == USB_STATE_CONFIGURED)
+			usb_set_device_state(dev, USB_STATE_ADDRESS);
+	}
+
+	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
+		skip_ep0 ? "non-ep0" : "all");
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+		/* Second pass: remove endpoint pointers */
+	}
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
+/**
+ * usb_enable_endpoint - Enable an endpoint for USB communications
+ * @dev: the device whose interface is being enabled
+ * @ep: the endpoint
+ * @reset_ep: flag to reset the endpoint state
+ *
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
+ * For control endpoints, both the input and output sides are handled.
+ */
+void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
+		bool reset_ep)
+{
+	int epnum = usb_endpoint_num(&ep->desc);
+	int is_out = usb_endpoint_dir_out(&ep->desc);
+	int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+	if (reset_ep)
+		usb_hcd_reset_endpoint(dev, ep);
+	if (is_out || is_control)
+		dev->ep_out[epnum] = ep;
+	if (!is_out || is_control)
+		dev->ep_in[epnum] = ep;
+	ep->enabled = 1;
+}
+
+/**
+ * usb_enable_interface - Enable all the endpoints for an interface
+ * @dev: the device whose interface is being enabled
+ * @intf: pointer to the interface descriptor
+ * @reset_eps: flag to reset the endpoints' state
+ *
+ * Enables all the endpoints for the interface's current altsetting.
+ */
+void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_eps)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	int i;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
+}
+
+/**
+ * usb_set_interface - Makes a particular alternate setting be current
+ * @dev: the device whose interface is being updated
+ * @interface: the interface being updated
+ * @alternate: the setting being chosen.
+ * Context: !in_interrupt ()
+ *
+ * This is used to enable data transfers on interfaces that may not
+ * be enabled by default.  Not all devices support such configurability.
+ * Only the driver bound to an interface may change its setting.
+ *
+ * Within any given configuration, each interface may have several
+ * alternative settings.  These are often used to control levels of
+ * bandwidth consumption.  For example, the default setting for a high
+ * speed interrupt endpoint may not send more than 64 bytes per microframe,
+ * while interrupt transfers of up to 3KBytes per microframe are legal.
+ * Also, isochronous endpoints may never be part of an
+ * interface's default setting.  To access such bandwidth, alternate
+ * interface settings must be made current.
+ *
+ * Note that in the Linux USB subsystem, bandwidth associated with
+ * an endpoint in a given alternate setting is not reserved until an URB
+ * is submitted that needs that bandwidth.  Some other operating systems
+ * allocate bandwidth early, when a configuration is chosen.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ * Also, drivers must not change altsettings while urbs are scheduled for
+ * endpoints in that interface; all such urbs must first be completed
+ * (perhaps forced by unlinking).
+ *
+ * Return: Zero on success, or else the status code returned by the
+ * underlying usb_control_msg() call.
+ */
+int usb_set_interface(struct usb_device *dev, int interface, int alternate)
+{
+	struct usb_interface *iface;
+	struct usb_host_interface *alt;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i, ret, manual = 0;
+	unsigned int epaddr;
+	unsigned int pipe;
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+
+	iface = usb_ifnum_to_if(dev, interface);
+	if (!iface) {
+		dev_dbg(&dev->dev, "selecting invalid interface %d\n",
+			interface);
+		return -EINVAL;
+	}
+	if (iface->unregistering)
+		return -ENODEV;
+
+	alt = usb_altnum_to_altsetting(iface, alternate);
+	if (!alt) {
+		dev_warn(&dev->dev, "selecting invalid altsetting %d\n",
+			 alternate);
+		return -EINVAL;
+	}
+
+	/* Make sure we have enough bandwidth for this alternate interface.
+	 * Remove the current alt setting and add the new alt setting.
+	 */
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new alt setting is installed,
+	 * so that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&iface->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
+	/* Changing alt-setting also frees any allocated streams */
+	for (i = 0; i < iface->cur_altsetting->desc.bNumEndpoints; i++)
+		iface->cur_altsetting->endpoint[i].streams = 0;
+
+	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
+	if (ret < 0) {
+		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
+				alternate);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return ret;
+	}
+
+	if (dev->quirks & USB_QUIRK_NO_SET_INTF)
+		ret = -EPIPE;
+	else
+		ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				   USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
+				   alternate, interface, NULL, 0, 5000);
+
+	/* 9.4.10 says devices don't need this and are free to STALL the
+	 * request if the interface only has one alternate setting.
+	 */
+	if (ret == -EPIPE && iface->num_altsetting == 1) {
+		dev_dbg(&dev->dev,
+			"manual set_interface for iface %d, alt %d\n",
+			interface, alternate);
+		manual = 1;
+	} else if (ret < 0) {
+		/* Re-instate the old alt setting */
+		usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return ret;
+	}
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	/* FIXME drivers shouldn't need to replicate/bugfix the logic here
+	 * when they implement async or easily-killable versions of this or
+	 * other "should-be-internal" functions (like clear_halt).
+	 * should hcd+usbcore postprocess control requests?
+	 */
+
+	/* prevent submissions using previous endpoint settings */
+	if (iface->cur_altsetting != alt) {
+		remove_intf_ep_devs(iface);
+		usb_remove_sysfs_intf_files(iface);
+	}
+	usb_disable_interface(dev, iface, true);
+
+	iface->cur_altsetting = alt;
+
+	/* Now that the interface is installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+
+	/* If the interface only has one altsetting and the device didn't
+	 * accept the request, we attempt to carry out the equivalent action
+	 * by manually clearing the HALT feature for each endpoint in the
+	 * new altsetting.
+	 */
+	if (manual) {
+		int i;
+
+		for (i = 0; i < alt->desc.bNumEndpoints; i++) {
+			epaddr = alt->endpoint[i].desc.bEndpointAddress;
+			pipe = __create_pipe(dev,
+					USB_ENDPOINT_NUMBER_MASK & epaddr) |
+					(usb_endpoint_out(epaddr) ?
+					USB_DIR_OUT : USB_DIR_IN);
+
+			usb_clear_halt(dev, pipe);
+		}
+	}
+
+	/* 9.1.1.5: reset toggles for all endpoints in the new altsetting
+	 *
+	 * Note:
+	 * Despite EP0 is always present in all interfaces/AS, the list of
+	 * endpoints from the descriptor does not contain EP0. Due to its
+	 * omnipresence one might expect EP0 being considered "affected" by
+	 * any SetInterface request and hence assume toggles need to be reset.
+	 * However, EP0 toggles are re-synced for every individual transfer
+	 * during the SETUP stage - hence EP0 toggles are "don't care" here.
+	 * (Likewise, EP0 never "halts" on well designed devices.)
+	 */
+	usb_enable_interface(dev, iface, true);
+	if (device_is_registered(&iface->dev)) {
+		usb_create_sysfs_intf_files(iface);
+		create_intf_ep_devs(iface);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_set_interface);
+
+/**
+ * usb_reset_configuration - lightweight device reset
+ * @dev: the device whose configuration is being reset
+ *
+ * This issues a standard SET_CONFIGURATION request to the device using
+ * the current configuration.  The effect is to reset most USB-related
+ * state in the device, including interface altsettings (reset to zero),
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
+ * endpoints).  Other usbcore state is unchanged, including bindings of
+ * usb device drivers to interfaces.
+ *
+ * Because this affects multiple interfaces, avoid using this with composite
+ * (multi-interface) devices.  Instead, the driver for each interface may
+ * use usb_set_interface() on the interfaces it claims.  Be careful though;
+ * some devices don't support the SET_INTERFACE request, and others won't
+ * reset all the interface state (notably endpoint state).  Resetting the whole
+ * configuration would affect other drivers' interfaces.
+ *
+ * The caller must own the device lock.
+ *
+ * Return: Zero on success, else a negative error code.
+ */
+int usb_reset_configuration(struct usb_device *dev)
+{
+	int			i, retval;
+	struct usb_host_config	*config;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+
+	if (dev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+
+	/* caller must have locked the device and must own
+	 * the usb bus readlock (so driver bindings are stable);
+	 * calls during probe() are fine
+	 */
+
+	for (i = 1; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+
+	config = dev->actconfig;
+	retval = 0;
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the configuration is reset, so
+	 * that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
+	/* Make sure we have enough bandwidth for each alternate setting 0 */
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		struct usb_interface *intf = config->interface[i];
+		struct usb_host_interface *alt;
+
+		alt = usb_altnum_to_altsetting(intf, 0);
+		if (!alt)
+			alt = &intf->altsetting[0];
+		if (alt != intf->cur_altsetting)
+			retval = usb_hcd_alloc_bandwidth(dev, NULL,
+					intf->cur_altsetting, alt);
+		if (retval < 0)
+			break;
+	}
+	/* If not, reinstate the old alternate settings */
+	if (retval < 0) {
+reset_old_alts:
+		for (i--; i >= 0; i--) {
+			struct usb_interface *intf = config->interface[i];
+			struct usb_host_interface *alt;
+
+			alt = usb_altnum_to_altsetting(intf, 0);
+			if (!alt)
+				alt = &intf->altsetting[0];
+			if (alt != intf->cur_altsetting)
+				usb_hcd_alloc_bandwidth(dev, NULL,
+						alt, intf->cur_altsetting);
+		}
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			USB_REQ_SET_CONFIGURATION, 0,
+			config->desc.bConfigurationValue, 0,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (retval < 0)
+		goto reset_old_alts;
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	/* re-init hc/hcd interface/endpoint state */
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		struct usb_interface *intf = config->interface[i];
+		struct usb_host_interface *alt;
+
+		alt = usb_altnum_to_altsetting(intf, 0);
+
+		/* No altsetting 0?  We'll assume the first altsetting.
+		 * We could use a GetInterface call, but if a device is
+		 * so non-compliant that it doesn't have altsetting 0
+		 * then I wouldn't trust its reply anyway.
+		 */
+		if (!alt)
+			alt = &intf->altsetting[0];
+
+		if (alt != intf->cur_altsetting) {
+			remove_intf_ep_devs(intf);
+			usb_remove_sysfs_intf_files(intf);
+		}
+		intf->cur_altsetting = alt;
+		usb_enable_interface(dev, intf, true);
+		if (device_is_registered(&intf->dev)) {
+			usb_create_sysfs_intf_files(intf);
+			create_intf_ep_devs(intf);
+		}
+	}
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_reset_configuration);
+
+static void usb_release_interface(struct device *dev)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_interface_cache *intfc =
+			altsetting_to_usb_interface_cache(intf->altsetting);
+
+	kref_put(&intfc->ref, usb_release_interface_cache);
+	usb_put_dev(interface_to_usbdev(intf));
+	kfree(intf);
+}
+
+static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+	struct usb_interface *intf;
+	struct usb_host_interface *alt;
+
+	intf = to_usb_interface(dev);
+	usb_dev = interface_to_usbdev(intf);
+	alt = intf->cur_altsetting;
+
+	if (add_uevent_var(env, "INTERFACE=%d/%d/%d",
+		   alt->desc.bInterfaceClass,
+		   alt->desc.bInterfaceSubClass,
+		   alt->desc.bInterfaceProtocol))
+		return -ENOMEM;
+
+	if (add_uevent_var(env,
+		   "MODALIAS=usb:"
+		   "v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02Xin%02X",
+		   le16_to_cpu(usb_dev->descriptor.idVendor),
+		   le16_to_cpu(usb_dev->descriptor.idProduct),
+		   le16_to_cpu(usb_dev->descriptor.bcdDevice),
+		   usb_dev->descriptor.bDeviceClass,
+		   usb_dev->descriptor.bDeviceSubClass,
+		   usb_dev->descriptor.bDeviceProtocol,
+		   alt->desc.bInterfaceClass,
+		   alt->desc.bInterfaceSubClass,
+		   alt->desc.bInterfaceProtocol,
+		   alt->desc.bInterfaceNumber))
+		return -ENOMEM;
+
+	return 0;
+}
+
+struct device_type usb_if_device_type = {
+	.name =		"usb_interface",
+	.release =	usb_release_interface,
+	.uevent =	usb_if_uevent,
+};
+
+static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
+						struct usb_host_config *config,
+						u8 inum)
+{
+	struct usb_interface_assoc_descriptor *retval = NULL;
+	struct usb_interface_assoc_descriptor *intf_assoc;
+	int first_intf;
+	int last_intf;
+	int i;
+
+	for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) {
+		intf_assoc = config->intf_assoc[i];
+		if (intf_assoc->bInterfaceCount == 0)
+			continue;
+
+		first_intf = intf_assoc->bFirstInterface;
+		last_intf = first_intf + (intf_assoc->bInterfaceCount - 1);
+		if (inum >= first_intf && inum <= last_intf) {
+			if (!retval)
+				retval = intf_assoc;
+			else
+				dev_err(&dev->dev, "Interface #%d referenced"
+					" by multiple IADs\n", inum);
+		}
+	}
+
+	return retval;
+}
+
+
+/*
+ * Internal function to queue a device reset
+ * See usb_queue_reset_device() for more details
+ */
+static void __usb_queue_reset_device(struct work_struct *ws)
+{
+	int rc;
+	struct usb_interface *iface =
+		container_of(ws, struct usb_interface, reset_ws);
+	struct usb_device *udev = interface_to_usbdev(iface);
+
+	rc = usb_lock_device_for_reset(udev, iface);
+	if (rc >= 0) {
+		usb_reset_device(udev);
+		usb_unlock_device(udev);
+	}
+	usb_put_intf(iface);	/* Undo _get_ in usb_queue_reset_device() */
+}
+
+
+/*
+ * usb_set_configuration - Makes a particular device setting be current
+ * @dev: the device whose configuration is being updated
+ * @configuration: the configuration being chosen.
+ * Context: !in_interrupt(), caller owns the device lock
+ *
+ * This is used to enable non-default device modes.  Not all devices
+ * use this kind of configurability; many devices only have one
+ * configuration.
+ *
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured.  However some devices erroneously use 0 as one of their
+ * configuration values.  To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
+ * USB device configurations may affect Linux interoperability,
+ * power consumption and the functionality available.  For example,
+ * the default configuration is limited to using 100mA of bus power,
+ * so that when certain device functionality requires more power,
+ * and the device is bus powered, that functionality should be in some
+ * non-default device configuration.  Other device modes may also be
+ * reflected as configuration options, such as whether two ISDN
+ * channels are available independently; and choosing between open
+ * standard device protocols (like CDC) or proprietary ones.
+ *
+ * Note that a non-authorized device (dev->authorized == 0) will only
+ * be put in unconfigured mode.
+ *
+ * Note that USB has an additional level of device configurability,
+ * associated with interfaces.  That configurability is accessed using
+ * usb_set_interface().
+ *
+ * This call is synchronous. The calling context must be able to sleep,
+ * must own the device lock, and must not hold the driver model's USB
+ * bus mutex; usb interface driver probe() methods cannot use this routine.
+ *
+ * Returns zero on success, or else the status code returned by the
+ * underlying call that failed.  On successful completion, each interface
+ * in the original device configuration has been destroyed, and each one
+ * in the new configuration has been probed by all relevant usb device
+ * drivers currently known to the kernel.
+ */
+int usb_set_configuration(struct usb_device *dev, int configuration)
+{
+	int i, ret;
+	struct usb_host_config *cp = NULL;
+	struct usb_interface **new_interfaces = NULL;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int n, nintf;
+
+	if (dev->authorized == 0 || configuration == -1)
+		configuration = 0;
+	else {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			if (dev->config[i].desc.bConfigurationValue ==
+					configuration) {
+				cp = &dev->config[i];
+				break;
+			}
+		}
+	}
+	if ((!cp && configuration != 0))
+		return -EINVAL;
+
+	/* The USB spec says configuration 0 means unconfigured.
+	 * But if a device includes a configuration numbered 0,
+	 * we will accept it as a correctly configured state.
+	 * Use -1 if you really want to unconfigure the device.
+	 */
+	if (cp && configuration == 0)
+		dev_warn(&dev->dev, "config 0 descriptor??\n");
+
+	/* Allocate memory for new interfaces before doing anything else,
+	 * so that if we run out then nothing will have changed. */
+	n = nintf = 0;
+	if (cp) {
+		nintf = cp->desc.bNumInterfaces;
+		new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
+				GFP_NOIO);
+		if (!new_interfaces) {
+			dev_err(&dev->dev, "Out of memory\n");
+			return -ENOMEM;
+		}
+
+		for (; n < nintf; ++n) {
+			new_interfaces[n] = kzalloc(
+					sizeof(struct usb_interface),
+					GFP_NOIO);
+			if (!new_interfaces[n]) {
+				dev_err(&dev->dev, "Out of memory\n");
+				ret = -ENOMEM;
+free_interfaces:
+				while (--n >= 0)
+					kfree(new_interfaces[n]);
+				kfree(new_interfaces);
+				return ret;
+			}
+		}
+
+		i = dev->bus_mA - usb_get_max_power(dev, cp);
+		if (i < 0)
+			dev_warn(&dev->dev, "new config #%d exceeds power "
+					"limit by %dmA\n",
+					configuration, -i);
+	}
+
+	/* Wake up the device so we can send it the Set-Config request */
+	ret = usb_autoresume_device(dev);
+	if (ret)
+		goto free_interfaces;
+
+	/* if it's already configured, clear out old state first.
+	 * getting rid of old interfaces means unbinding their drivers.
+	 */
+	if (dev->state != USB_STATE_ADDRESS)
+		usb_disable_device(dev, 1);	/* Skip ep0 */
+
+	/* Get rid of pending async Set-Config requests for this device */
+	cancel_async_set_config(dev);
+
+	/* Make sure we have bandwidth (and available HCD resources) for this
+	 * configuration.  Remove endpoints from the schedule if we're dropping
+	 * this configuration to set configuration 0.  After this point, the
+	 * host controller will not allow submissions to dropped endpoints.  If
+	 * this call fails, the device state is unchanged.
+	 */
+	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new configuration is
+	 * installed, so that the xHCI driver can recalculate the U1/U2
+	 * timeouts.
+	 */
+	if (dev->actconfig && usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		ret = -ENOMEM;
+		goto free_interfaces;
+	}
+	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
+	if (ret < 0) {
+		if (dev->actconfig)
+			usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		usb_autosuspend_device(dev);
+		goto free_interfaces;
+	}
+
+	/*
+	 * Initialize the new interface structures and the
+	 * hc/hcd/usbcore interface/endpoint state.
+	 */
+	for (i = 0; i < nintf; ++i) {
+		struct usb_interface_cache *intfc;
+		struct usb_interface *intf;
+		struct usb_host_interface *alt;
+
+		cp->interface[i] = intf = new_interfaces[i];
+		intfc = cp->intf_cache[i];
+		intf->altsetting = intfc->altsetting;
+		intf->num_altsetting = intfc->num_altsetting;
+		kref_get(&intfc->ref);
+
+		alt = usb_altnum_to_altsetting(intf, 0);
+
+		/* No altsetting 0?  We'll assume the first altsetting.
+		 * We could use a GetInterface call, but if a device is
+		 * so non-compliant that it doesn't have altsetting 0
+		 * then I wouldn't trust its reply anyway.
+		 */
+		if (!alt)
+			alt = &intf->altsetting[0];
+
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
+		intf->cur_altsetting = alt;
+		usb_enable_interface(dev, intf, true);
+		intf->dev.parent = &dev->dev;
+		intf->dev.driver = NULL;
+		intf->dev.bus = &usb_bus_type;
+		intf->dev.type = &usb_if_device_type;
+		intf->dev.groups = usb_interface_groups;
+		intf->dev.dma_mask = dev->dev.dma_mask;
+		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+		intf->minor = -1;
+		device_initialize(&intf->dev);
+		pm_runtime_no_callbacks(&intf->dev);
+		dev_set_name(&intf->dev, "%d-%s:%d.%d",
+			dev->bus->busnum, dev->devpath,
+			configuration, alt->desc.bInterfaceNumber);
+		usb_get_dev(dev);
+	}
+	kfree(new_interfaces);
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+			      NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0 && cp) {
+		/*
+		 * All the old state is gone, so what else can we do?
+		 * The device is probably useless now anyway.
+		 */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		for (i = 0; i < nintf; ++i) {
+			usb_disable_interface(dev, cp->interface[i], true);
+			put_device(&cp->interface[i]->dev);
+			cp->interface[i] = NULL;
+		}
+		cp = NULL;
+	}
+
+	dev->actconfig = cp;
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	if (!cp) {
+		usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+		/* Leave LPM disabled while the device is unconfigured. */
+		usb_autosuspend_device(dev);
+		return ret;
+	}
+	usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
+	if (cp->string == NULL &&
+			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+	/* Enable LTM if it was turned off by usb_disable_device. */
+	usb_enable_ltm(dev);
+
+	/* Now that all the interfaces are set up, register them
+	 * to trigger binding of drivers to interfaces.  probe()
+	 * routines may install different altsettings and may
+	 * claim() any interfaces not yet bound.  Many class drivers
+	 * need that: CDC, audio, video, etc.
+	 */
+	for (i = 0; i < nintf; ++i) {
+		struct usb_interface *intf = cp->interface[i];
+
+		dev_dbg(&dev->dev,
+			"adding %s (config #%d, interface %d)\n",
+			dev_name(&intf->dev), configuration,
+			intf->cur_altsetting->desc.bInterfaceNumber);
+		device_enable_async_suspend(&intf->dev);
+		ret = device_add(&intf->dev);
+		if (ret != 0) {
+			dev_err(&dev->dev, "device_add(%s) --> %d\n",
+				dev_name(&intf->dev), ret);
+			continue;
+		}
+		create_intf_ep_devs(intf);
+	}
+
+	usb_autosuspend_device(dev);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_set_configuration);
+
+static LIST_HEAD(set_config_list);
+static DEFINE_SPINLOCK(set_config_lock);
+
+struct set_config_request {
+	struct usb_device	*udev;
+	int			config;
+	struct work_struct	work;
+	struct list_head	node;
+};
+
+/* Worker routine for usb_driver_set_configuration() */
+static void driver_set_config_work(struct work_struct *work)
+{
+	struct set_config_request *req =
+		container_of(work, struct set_config_request, work);
+	struct usb_device *udev = req->udev;
+
+	usb_lock_device(udev);
+	spin_lock(&set_config_lock);
+	list_del(&req->node);
+	spin_unlock(&set_config_lock);
+
+	if (req->config >= -1)		/* Is req still valid? */
+		usb_set_configuration(udev, req->config);
+	usb_unlock_device(udev);
+	usb_put_dev(udev);
+	kfree(req);
+}
+
+/* Cancel pending Set-Config requests for a device whose configuration
+ * was just changed
+ */
+static void cancel_async_set_config(struct usb_device *udev)
+{
+	struct set_config_request *req;
+
+	spin_lock(&set_config_lock);
+	list_for_each_entry(req, &set_config_list, node) {
+		if (req->udev == udev)
+			req->config = -999;	/* Mark as cancelled */
+	}
+	spin_unlock(&set_config_lock);
+}
+
+/**
+ * usb_driver_set_configuration - Provide a way for drivers to change device configurations
+ * @udev: the device whose configuration is being updated
+ * @config: the configuration being chosen.
+ * Context: In process context, must be able to sleep
+ *
+ * Device interface drivers are not allowed to change device configurations.
+ * This is because changing configurations will destroy the interface the
+ * driver is bound to and create new ones; it would be like a floppy-disk
+ * driver telling the computer to replace the floppy-disk drive with a
+ * tape drive!
+ *
+ * Still, in certain specialized circumstances the need may arise.  This
+ * routine gets around the normal restrictions by using a work thread to
+ * submit the change-config request.
+ *
+ * Return: 0 if the request was successfully queued, error code otherwise.
+ * The caller has no way to know whether the queued request will eventually
+ * succeed.
+ */
+int usb_driver_set_configuration(struct usb_device *udev, int config)
+{
+	struct set_config_request *req;
+
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+	req->udev = udev;
+	req->config = config;
+	INIT_WORK(&req->work, driver_set_config_work);
+
+	spin_lock(&set_config_lock);
+	list_add(&req->node, &set_config_list);
+	spin_unlock(&set_config_lock);
+
+	usb_get_dev(udev);
+	schedule_work(&req->work);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
new file mode 100644
index 000000000..7728c91df
--- /dev/null
+++ b/drivers/usb/core/notify.c
@@ -0,0 +1,69 @@
+/*
+ * All the USB notify logic
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * notifier functions originally based on those in kernel/sys.c
+ * but fixed up to not be so broken.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/notifier.h>
+#include <linux/usb.h>
+#include <linux/mutex.h>
+#include "usb.h"
+
+static BLOCKING_NOTIFIER_HEAD(usb_notifier_list);
+
+/**
+ * usb_register_notify - register a notifier callback whenever a usb change happens
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * These changes are either USB devices or busses being added or removed.
+ */
+void usb_register_notify(struct notifier_block *nb)
+{
+	blocking_notifier_chain_register(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_register_notify);
+
+/**
+ * usb_unregister_notify - unregister a notifier callback
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * usb_register_notify() must have been previously called for this function
+ * to work properly.
+ */
+void usb_unregister_notify(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_unregister_notify);
+
+
+void usb_notify_add_device(struct usb_device *udev)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev);
+}
+
+void usb_notify_remove_device(struct usb_device *udev)
+{
+	/* Protect against simultaneous usbfs open */
+	mutex_lock(&usbfs_mutex);
+	blocking_notifier_call_chain(&usb_notifier_list,
+			USB_DEVICE_REMOVE, udev);
+	mutex_unlock(&usbfs_mutex);
+}
+
+void usb_notify_add_bus(struct usb_bus *ubus)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus);
+}
+
+void usb_notify_remove_bus(struct usb_bus *ubus)
+{
+	blocking_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus);
+}
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
new file mode 100644
index 000000000..a6315abe7
--- /dev/null
+++ b/drivers/usb/core/otg_whitelist.h
@@ -0,0 +1,110 @@
+/*
+ * drivers/usb/core/otg_whitelist.h
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * This OTG and Embedded Host Whitelist is "Targeted Peripheral List".
+ * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ *
+ * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
+ */
+
+static struct usb_device_id whitelist_table [] = {
+
+/* hubs are optional in OTG, but very handy ... */
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
+
+#ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+/* FIXME actually, printers are NOT supposed to use device classes;
+ * they're supposed to use interface classes...
+ */
+{ USB_DEVICE_INFO(7, 1, 1) },
+{ USB_DEVICE_INFO(7, 1, 2) },
+{ USB_DEVICE_INFO(7, 1, 3) },
+#endif
+
+#ifdef	CONFIG_USB_NET_CDCETHER
+/* Linux-USB CDC Ethernet gadget */
+{ USB_DEVICE(0x0525, 0xa4a1), },
+/* Linux-USB CDC Ethernet + RNDIS gadget */
+{ USB_DEVICE(0x0525, 0xa4a2), },
+#endif
+
+#if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+/* gadget zero, for testing */
+{ USB_DEVICE(0x0525, 0xa4a0), },
+#endif
+
+{ }	/* Terminating entry */
+};
+
+static int is_targeted(struct usb_device *dev)
+{
+	struct usb_device_id	*id = whitelist_table;
+
+	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+		return 0;
+
+	/* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+	     le16_to_cpu(dev->descriptor.idProduct) == 0x0200))
+		return 1;
+
+	/* NOTE: can't use usb_match_id() since interface caches
+	 * aren't set up yet. this is cut/paste from that code.
+	 */
+	for (id = whitelist_table; id->match_flags; id++) {
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+			continue;
+
+		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+		   greater than any unsigned number. */
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+		    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+			continue;
+
+		return 1;
+	}
+
+	/* add other match criteria here ... */
+
+
+	/* OTG MESSAGE: report errors here, customize to match your product */
+	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+		le16_to_cpu(dev->descriptor.idVendor),
+		le16_to_cpu(dev->descriptor.idProduct));
+
+	return 0;
+}
+
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
new file mode 100644
index 000000000..210618319
--- /dev/null
+++ b/drivers/usb/core/port.c
@@ -0,0 +1,487 @@
+/*
+ * usb port device code
+ *
+ * Copyright (C) 2012 Intel Corp
+ *
+ * Author: Lan Tianyu <tianyu.lan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/pm_qos.h>
+
+#include "hub.h"
+
+static int usb_port_block_power_off;
+
+static const struct attribute_group *port_dev_group[];
+
+static ssize_t connect_type_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	char *result;
+
+	switch (port_dev->connect_type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		result = "hotplug";
+		break;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+		result = "hardwired";
+		break;
+	case USB_PORT_NOT_USED:
+		result = "not used";
+		break;
+	default:
+		result = "unknown";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", result);
+}
+static DEVICE_ATTR_RO(connect_type);
+
+static struct attribute *port_dev_attrs[] = {
+	&dev_attr_connect_type.attr,
+	NULL,
+};
+
+static struct attribute_group port_dev_attr_grp = {
+	.attrs = port_dev_attrs,
+};
+
+static const struct attribute_group *port_dev_group[] = {
+	&port_dev_attr_grp,
+	NULL,
+};
+
+static void usb_port_device_release(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+
+	kfree(port_dev->req);
+	kfree(port_dev);
+}
+
+#ifdef CONFIG_PM
+static int usb_port_runtime_resume(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_interface *intf = to_usb_interface(dev->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_device *udev = port_dev->child;
+	struct usb_port *peer = port_dev->peer;
+	int port1 = port_dev->portnum;
+	int retval;
+
+	if (!hub)
+		return -EINVAL;
+	if (hub->in_reset) {
+		set_bit(port1, hub->power_bits);
+		return 0;
+	}
+
+	/*
+	 * Power on our usb3 peer before this usb2 port to prevent a usb3
+	 * device from degrading to its usb2 connection
+	 */
+	if (!port_dev->is_superspeed && peer)
+		pm_runtime_get_sync(&peer->dev);
+
+	usb_autopm_get_interface(intf);
+	retval = usb_hub_set_port_power(hdev, hub, port1, true);
+	msleep(hub_power_on_good_delay(hub));
+	if (udev && !retval) {
+		/*
+		 * Our preference is to simply wait for the port to reconnect,
+		 * as that is the lowest latency method to restart the port.
+		 * However, there are cases where toggling port power results in
+		 * the host port and the device port getting out of sync causing
+		 * a link training live lock.  Upon timeout, flag the port as
+		 * needing warm reset recovery (to be performed later by
+		 * usb_port_resume() as requested via usb_wakeup_notification())
+		 */
+		if (hub_port_debounce_be_connected(hub, port1) < 0) {
+			dev_dbg(&port_dev->dev, "reconnect timeout\n");
+			if (hub_is_superspeed(hdev))
+				set_bit(port1, hub->warm_reset_bits);
+		}
+
+		/* Force the child awake to revalidate after the power loss. */
+		if (!test_and_set_bit(port1, hub->child_usage_bits)) {
+			pm_runtime_get_noresume(&port_dev->dev);
+			pm_request_resume(&udev->dev);
+		}
+	}
+
+	usb_autopm_put_interface(intf);
+
+	return retval;
+}
+
+static int usb_port_runtime_suspend(struct device *dev)
+{
+	struct usb_port *port_dev = to_usb_port(dev);
+	struct usb_device *hdev = to_usb_device(dev->parent->parent);
+	struct usb_interface *intf = to_usb_interface(dev->parent);
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_port *peer = port_dev->peer;
+	int port1 = port_dev->portnum;
+	int retval;
+
+	if (!hub)
+		return -EINVAL;
+	if (hub->in_reset)
+		return -EBUSY;
+
+	if (dev_pm_qos_flags(&port_dev->dev, PM_QOS_FLAG_NO_POWER_OFF)
+			== PM_QOS_FLAGS_ALL)
+		return -EAGAIN;
+
+	if (usb_port_block_power_off)
+		return -EBUSY;
+
+	usb_autopm_get_interface(intf);
+	retval = usb_hub_set_port_power(hdev, hub, port1, false);
+	usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+	if (!port_dev->is_superspeed)
+		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+	usb_autopm_put_interface(intf);
+
+	/*
+	 * Our peer usb3 port may now be able to suspend, so
+	 * asynchronously queue a suspend request to observe that this
+	 * usb2 port is now off.
+	 */
+	if (!port_dev->is_superspeed && peer)
+		pm_runtime_put(&peer->dev);
+
+	return retval;
+}
+#endif
+
+static const struct dev_pm_ops usb_port_pm_ops = {
+#ifdef CONFIG_PM
+	.runtime_suspend =	usb_port_runtime_suspend,
+	.runtime_resume =	usb_port_runtime_resume,
+#endif
+};
+
+struct device_type usb_port_device_type = {
+	.name =		"usb_port",
+	.release =	usb_port_device_release,
+	.pm =		&usb_port_pm_ops,
+};
+
+static struct device_driver usb_port_driver = {
+	.name = "usb",
+	.owner = THIS_MODULE,
+};
+
+static int link_peers(struct usb_port *left, struct usb_port *right)
+{
+	struct usb_port *ss_port, *hs_port;
+	int rc;
+
+	if (left->peer == right && right->peer == left)
+		return 0;
+
+	if (left->peer || right->peer) {
+		struct usb_port *lpeer = left->peer;
+		struct usb_port *rpeer = right->peer;
+		char *method;
+
+		if (left->location && left->location == right->location)
+			method = "location";
+		else
+			method = "default";
+
+		pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n",
+			dev_name(&left->dev), dev_name(&right->dev), method,
+			dev_name(&left->dev),
+			lpeer ? dev_name(&lpeer->dev) : "none",
+			dev_name(&right->dev),
+			rpeer ? dev_name(&rpeer->dev) : "none");
+		return -EBUSY;
+	}
+
+	rc = sysfs_create_link(&left->dev.kobj, &right->dev.kobj, "peer");
+	if (rc)
+		return rc;
+	rc = sysfs_create_link(&right->dev.kobj, &left->dev.kobj, "peer");
+	if (rc) {
+		sysfs_remove_link(&left->dev.kobj, "peer");
+		return rc;
+	}
+
+	/*
+	 * We need to wake the HiSpeed port to make sure we don't race
+	 * setting ->peer with usb_port_runtime_suspend().  Otherwise we
+	 * may miss a suspend event for the SuperSpeed port.
+	 */
+	if (left->is_superspeed) {
+		ss_port = left;
+		WARN_ON(right->is_superspeed);
+		hs_port = right;
+	} else {
+		ss_port = right;
+		WARN_ON(!right->is_superspeed);
+		hs_port = left;
+	}
+	pm_runtime_get_sync(&hs_port->dev);
+
+	left->peer = right;
+	right->peer = left;
+
+	/*
+	 * The SuperSpeed reference is dropped when the HiSpeed port in
+	 * this relationship suspends, i.e. when it is safe to allow a
+	 * SuperSpeed connection to drop since there is no risk of a
+	 * device degrading to its powered-off HiSpeed connection.
+	 *
+	 * Also, drop the HiSpeed ref taken above.
+	 */
+	pm_runtime_get_sync(&ss_port->dev);
+	pm_runtime_put(&hs_port->dev);
+
+	return 0;
+}
+
+static void link_peers_report(struct usb_port *left, struct usb_port *right)
+{
+	int rc;
+
+	rc = link_peers(left, right);
+	if (rc == 0) {
+		dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev));
+	} else {
+		dev_warn(&left->dev, "failed to peer to %s (%d)\n",
+				dev_name(&right->dev), rc);
+		pr_warn_once("usb: port power management may be unreliable\n");
+		usb_port_block_power_off = 1;
+	}
+}
+
+static void unlink_peers(struct usb_port *left, struct usb_port *right)
+{
+	struct usb_port *ss_port, *hs_port;
+
+	WARN(right->peer != left || left->peer != right,
+			"%s and %s are not peers?\n",
+			dev_name(&left->dev), dev_name(&right->dev));
+
+	/*
+	 * We wake the HiSpeed port to make sure we don't race its
+	 * usb_port_runtime_resume() event which takes a SuperSpeed ref
+	 * when ->peer is !NULL.
+	 */
+	if (left->is_superspeed) {
+		ss_port = left;
+		hs_port = right;
+	} else {
+		ss_port = right;
+		hs_port = left;
+	}
+
+	pm_runtime_get_sync(&hs_port->dev);
+
+	sysfs_remove_link(&left->dev.kobj, "peer");
+	right->peer = NULL;
+	sysfs_remove_link(&right->dev.kobj, "peer");
+	left->peer = NULL;
+
+	/* Drop the SuperSpeed ref held on behalf of the active HiSpeed port */
+	pm_runtime_put(&ss_port->dev);
+
+	/* Drop the ref taken above */
+	pm_runtime_put(&hs_port->dev);
+}
+
+/*
+ * For each usb hub device in the system check to see if it is in the
+ * peer domain of the given port_dev, and if it is check to see if it
+ * has a port that matches the given port by location
+ */
+static int match_location(struct usb_device *peer_hdev, void *p)
+{
+	int port1;
+	struct usb_hcd *hcd, *peer_hcd;
+	struct usb_port *port_dev = p, *peer;
+	struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev);
+	struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent);
+
+	if (!peer_hub)
+		return 0;
+
+	hcd = bus_to_hcd(hdev->bus);
+	peer_hcd = bus_to_hcd(peer_hdev->bus);
+	/* peer_hcd is provisional until we verify it against the known peer */
+	if (peer_hcd != hcd->shared_hcd)
+		return 0;
+
+	for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) {
+		peer = peer_hub->ports[port1 - 1];
+		if (peer && peer->location == port_dev->location) {
+			link_peers_report(port_dev, peer);
+			return 1; /* done */
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Find the peer port either via explicit platform firmware "location"
+ * data, the peer hcd for root hubs, or the upstream peer relationship
+ * for all other hubs.
+ */
+static void find_and_link_peer(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1], *peer;
+	struct usb_device *hdev = hub->hdev;
+	struct usb_device *peer_hdev;
+	struct usb_hub *peer_hub;
+
+	/*
+	 * If location data is available then we can only peer this port
+	 * by a location match, not the default peer (lest we create a
+	 * situation where we need to go back and undo a default peering
+	 * when the port is later peered by location data)
+	 */
+	if (port_dev->location) {
+		/* we link the peer in match_location() if found */
+		usb_for_each_dev(port_dev, match_location);
+		return;
+	} else if (!hdev->parent) {
+		struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+		struct usb_hcd *peer_hcd = hcd->shared_hcd;
+
+		if (!peer_hcd)
+			return;
+
+		peer_hdev = peer_hcd->self.root_hub;
+	} else {
+		struct usb_port *upstream;
+		struct usb_device *parent = hdev->parent;
+		struct usb_hub *parent_hub = usb_hub_to_struct_hub(parent);
+
+		if (!parent_hub)
+			return;
+
+		upstream = parent_hub->ports[hdev->portnum - 1];
+		if (!upstream || !upstream->peer)
+			return;
+
+		peer_hdev = upstream->peer->child;
+	}
+
+	peer_hub = usb_hub_to_struct_hub(peer_hdev);
+	if (!peer_hub || port1 > peer_hdev->maxchild)
+		return;
+
+	/*
+	 * we found a valid default peer, last check is to make sure it
+	 * does not have location data
+	 */
+	peer = peer_hub->ports[port1 - 1];
+	if (peer && peer->location == 0)
+		link_peers_report(port_dev, peer);
+}
+
+int usb_hub_create_port_device(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev;
+	int retval;
+
+	port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL);
+	if (!port_dev)
+		return -ENOMEM;
+
+	port_dev->req = kzalloc(sizeof(*(port_dev->req)), GFP_KERNEL);
+	if (!port_dev->req) {
+		kfree(port_dev);
+		return -ENOMEM;
+	}
+
+	hub->ports[port1 - 1] = port_dev;
+	port_dev->portnum = port1;
+	set_bit(port1, hub->power_bits);
+	port_dev->dev.parent = hub->intfdev;
+	port_dev->dev.groups = port_dev_group;
+	port_dev->dev.type = &usb_port_device_type;
+	port_dev->dev.driver = &usb_port_driver;
+	if (hub_is_superspeed(hub->hdev))
+		port_dev->is_superspeed = 1;
+	dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev),
+			port1);
+	mutex_init(&port_dev->status_lock);
+	retval = device_register(&port_dev->dev);
+	if (retval) {
+		put_device(&port_dev->dev);
+		return retval;
+	}
+
+	/* Set default policy of port-poweroff disabled. */
+	retval = dev_pm_qos_add_request(&port_dev->dev, port_dev->req,
+			DEV_PM_QOS_FLAGS, PM_QOS_FLAG_NO_POWER_OFF);
+	if (retval < 0) {
+		device_unregister(&port_dev->dev);
+		return retval;
+	}
+
+	find_and_link_peer(hub, port1);
+
+	/*
+	 * Enable runtime pm and hold a refernce that hub_configure()
+	 * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
+	 * and the hub has been fully registered (hdev->maxchild set).
+	 */
+	pm_runtime_set_active(&port_dev->dev);
+	pm_runtime_get_noresume(&port_dev->dev);
+	pm_runtime_enable(&port_dev->dev);
+	device_enable_async_suspend(&port_dev->dev);
+
+	/*
+	 * Keep hidden the ability to enable port-poweroff if the hub
+	 * does not support power switching.
+	 */
+	if (!hub_is_port_power_switchable(hub))
+		return 0;
+
+	/* Attempt to let userspace take over the policy. */
+	retval = dev_pm_qos_expose_flags(&port_dev->dev,
+			PM_QOS_FLAG_NO_POWER_OFF);
+	if (retval < 0) {
+		dev_warn(&port_dev->dev, "failed to expose pm_qos_no_poweroff\n");
+		return 0;
+	}
+
+	/* Userspace owns the policy, drop the kernel 'no_poweroff' request. */
+	retval = dev_pm_qos_remove_request(port_dev->req);
+	if (retval >= 0) {
+		kfree(port_dev->req);
+		port_dev->req = NULL;
+	}
+	return 0;
+}
+
+void usb_hub_remove_port_device(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_port *peer;
+
+	peer = port_dev->peer;
+	if (peer)
+		unlink_peers(port_dev, peer);
+	device_unregister(&port_dev->dev);
+}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
new file mode 100644
index 000000000..d85abfed8
--- /dev/null
+++ b/drivers/usb/core/quirks.c
@@ -0,0 +1,312 @@
+/*
+ * USB device quirk handling logic and table
+ *
+ * Copyright (c) 2007 Oliver Neukum
+ * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ *
+ */
+
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
+#include "usb.h"
+
+/* Lists of quirky USB devices, split in device quirks and interface quirks.
+ * Device quirks are applied at the very beginning of the enumeration process,
+ * right after reading the device descriptor. They can thus only match on device
+ * information.
+ *
+ * Interface quirks are applied after reading all the configuration descriptors.
+ * They can match on both device and interface information.
+ *
+ * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
+ * interface quirks, as they only influence the enumeration process which is run
+ * before processing the interface quirks.
+ *
+ * Please keep the lists ordered by:
+ * 	1) Vendor ID
+ * 	2) Product ID
+ * 	3) Class ID
+ */
+static const struct usb_device_id usb_quirk_list[] = {
+	/* CBM - Flash disk */
+	{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* HP 5300/5370C scanner */
+	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
+			USB_QUIRK_STRING_FETCH_255 },
+
+	/* Creative SB Audigy 2 NX */
+	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Microsoft Wireless Laser Mouse 6000 Receiver */
+	{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Microsoft LifeCam-VX700 v2.0 */
+	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech HD Pro Webcams C920 and C930e */
+	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech Quickcam Fusion */
+	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Orbit MP */
+	{ USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Pro for Notebook */
+	{ USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Pro 5000 */
+	{ USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam OEM Dell Notebook */
+	{ USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam OEM Cisco VT Camera II */
+	{ USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Harmony 700-series */
+	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Philips PSC805 audio device */
+	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Artisman Watchdog Dongle */
+	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Microchip Joss Optical infrared touchboard device */
+	{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* CarrolTouch 4000U */
+	{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* CarrolTouch 4500U */
+	{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Samsung Android phone modem - ID conflict with SPH-I500 */
+	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Elan Touchscreen */
+	{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x010c), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x0125), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
+	/* Roland SC-8820 */
+	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Edirol SD-20 */
+	{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Alcor Micro Corp. Hub */
+	{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* appletouch */
+	{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Avision AV600U */
+	{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
+	  USB_QUIRK_STRING_FETCH_255 },
+
+	/* Saitek Cyborg Gold Joystick */
+	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
+	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Midiman M-Audio Keystation 88es */
+	{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* M-Systems Flash Disk Pioneers */
+	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Keytouch QWERTY Panel keyboard */
+	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
+	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
+	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+
+	/* Broadcom BCM92035DGROM BT dongle */
+	{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* MAYA44USB sound device */
+	{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Action Semiconductor flash disk */
+	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
+			USB_QUIRK_STRING_FETCH_255 },
+
+	/* SKYMEDI USB_DRIVE */
+	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Razer - Razer Blade Keyboard */
+	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
+			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+
+	/* BUILDWIN Photo Frame */
+	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
+			USB_QUIRK_HONOR_BNUMINTERFACES },
+
+	/* INTEL VALUE SSD */
+	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* USB3503 */
+	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
+	/* Protocol and OTG Electrical Test Device */
+	{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
+			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+
+	{ }  /* terminating entry must be last */
+};
+
+static const struct usb_device_id usb_interface_quirk_list[] = {
+	/* Logitech UVC Cameras */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
+	  .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
+static const struct usb_device_id usb_amd_resume_quirk_list[] = {
+	/* Lenovo Mouse with Pixart controller */
+	{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Pixart Mouse */
+	{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
+	{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Optical Mouse M90/M100 */
+	{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	{ }  /* terminating entry must be last */
+};
+
+static bool usb_match_any_interface(struct usb_device *udev,
+				    const struct usb_device_id *id)
+{
+	unsigned int i;
+
+	for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
+		struct usb_host_config *cfg = &udev->config[i];
+		unsigned int j;
+
+		for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
+			struct usb_interface_cache *cache;
+			struct usb_host_interface *intf;
+
+			cache = cfg->intf_cache[j];
+			if (cache->num_altsetting == 0)
+				continue;
+
+			intf = &cache->altsetting[0];
+			if (usb_match_one_id_intf(udev, intf, id))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static int usb_amd_resume_quirk(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	hcd = bus_to_hcd(udev->bus);
+	/* The device should be attached directly to root hub */
+	if (udev->level == 1 && hcd->amd_resume_bug == 1)
+		return 1;
+
+	return 0;
+}
+
+static u32 __usb_detect_quirks(struct usb_device *udev,
+			       const struct usb_device_id *id)
+{
+	u32 quirks = 0;
+
+	for (; id->match_flags; id++) {
+		if (!usb_match_device(udev, id))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
+		    !usb_match_any_interface(udev, id))
+			continue;
+
+		quirks |= (u32)(id->driver_info);
+	}
+
+	return quirks;
+}
+
+/*
+ * Detect any quirks the device has, and do any housekeeping for it if needed.
+ */
+void usb_detect_quirks(struct usb_device *udev)
+{
+	udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
+
+	/*
+	 * Pixart-based mice would trigger remote wakeup issue on AMD
+	 * Yangtze chipset, so set them as RESET_RESUME flag.
+	 */
+	if (usb_amd_resume_quirk(udev))
+		udev->quirks |= __usb_detect_quirks(udev,
+				usb_amd_resume_quirk_list);
+
+	if (udev->quirks)
+		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
+			udev->quirks);
+
+#ifdef CONFIG_USB_DEFAULT_PERSIST
+	if (!(udev->quirks & USB_QUIRK_RESET))
+		udev->persist_enabled = 1;
+#else
+	/* Hubs are automatically enabled for USB-PERSIST */
+	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		udev->persist_enabled = 1;
+#endif	/* CONFIG_USB_DEFAULT_PERSIST */
+}
+
+void usb_detect_interface_quirks(struct usb_device *udev)
+{
+	u32 quirks;
+
+	quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+	if (quirks == 0)
+		return;
+
+	dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
+		quirks);
+	udev->quirks |= quirks;
+}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
new file mode 100644
index 000000000..d26973844
--- /dev/null
+++ b/drivers/usb/core/sysfs.c
@@ -0,0 +1,997 @@
+/*
+ * drivers/usb/core/sysfs.c
+ *
+ * (C) Copyright 2002 David Brownell
+ * (C) Copyright 2002,2004 Greg Kroah-Hartman
+ * (C) Copyright 2002,2004 IBM Corp.
+ *
+ * All of the sysfs file attributes for usb devices and interfaces.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include "usb.h"
+
+/* Active configuration fields */
+#define usb_actconfig_show(field, format_string)			\
+static ssize_t field##_show(struct device *dev,				\
+			    struct device_attribute *attr, char *buf)	\
+{									\
+	struct usb_device *udev;					\
+	struct usb_host_config *actconfig;				\
+	ssize_t rc = 0;							\
+									\
+	udev = to_usb_device(dev);					\
+	usb_lock_device(udev);						\
+	actconfig = udev->actconfig;					\
+	if (actconfig)							\
+		rc = sprintf(buf, format_string,			\
+				actconfig->desc.field);			\
+	usb_unlock_device(udev);					\
+	return rc;							\
+}									\
+
+#define usb_actconfig_attr(field, format_string)		\
+	usb_actconfig_show(field, format_string)		\
+	static DEVICE_ATTR_RO(field)
+
+usb_actconfig_attr(bNumInterfaces, "%2d\n");
+usb_actconfig_attr(bmAttributes, "%2x\n");
+
+static ssize_t bMaxPower_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+	struct usb_host_config *actconfig;
+	ssize_t rc = 0;
+
+	udev = to_usb_device(dev);
+	usb_lock_device(udev);
+	actconfig = udev->actconfig;
+	if (actconfig)
+		rc = sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RO(bMaxPower);
+
+static ssize_t configuration_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+	struct usb_host_config *actconfig;
+	ssize_t rc = 0;
+
+	udev = to_usb_device(dev);
+	usb_lock_device(udev);
+	actconfig = udev->actconfig;
+	if (actconfig && actconfig->string)
+		rc = sprintf(buf, "%s\n", actconfig->string);
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RO(configuration);
+
+/* configuration value is always present, and r/w */
+usb_actconfig_show(bConfigurationValue, "%u\n");
+
+static ssize_t bConfigurationValue_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			config, value;
+
+	if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255)
+		return -EINVAL;
+	usb_lock_device(udev);
+	value = usb_set_configuration(udev, config);
+	usb_unlock_device(udev);
+	return (value < 0) ? value : count;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
+		bConfigurationValue_show, bConfigurationValue_store);
+
+/* String fields */
+#define usb_string_attr(name)						\
+static ssize_t  name##_show(struct device *dev,				\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_device *udev;					\
+	int retval;							\
+									\
+	udev = to_usb_device(dev);					\
+	usb_lock_device(udev);						\
+	retval = sprintf(buf, "%s\n", udev->name);			\
+	usb_unlock_device(udev);					\
+	return retval;							\
+}									\
+static DEVICE_ATTR_RO(name)
+
+usb_string_attr(product);
+usb_string_attr(manufacturer);
+usb_string_attr(serial);
+
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev;
+	char *speed;
+
+	udev = to_usb_device(dev);
+
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		speed = "1.5";
+		break;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_FULL:
+		speed = "12";
+		break;
+	case USB_SPEED_HIGH:
+		speed = "480";
+		break;
+	case USB_SPEED_WIRELESS:
+		speed = "480";
+		break;
+	case USB_SPEED_SUPER:
+		speed = "5000";
+		break;
+	default:
+		speed = "unknown";
+	}
+	return sprintf(buf, "%s\n", speed);
+}
+static DEVICE_ATTR_RO(speed);
+
+static ssize_t busnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", udev->bus->busnum);
+}
+static DEVICE_ATTR_RO(busnum);
+
+static ssize_t devnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", udev->devnum);
+}
+static DEVICE_ATTR_RO(devnum);
+
+static ssize_t devpath_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%s\n", udev->devpath);
+}
+static DEVICE_ATTR_RO(devpath);
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev;
+	u16 bcdUSB;
+
+	udev = to_usb_device(dev);
+	bcdUSB = le16_to_cpu(udev->descriptor.bcdUSB);
+	return sprintf(buf, "%2x.%02x\n", bcdUSB >> 8, bcdUSB & 0xff);
+}
+static DEVICE_ATTR_RO(version);
+
+static ssize_t maxchild_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", udev->maxchild);
+}
+static DEVICE_ATTR_RO(maxchild);
+
+static ssize_t quirks_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "0x%x\n", udev->quirks);
+}
+static DEVICE_ATTR_RO(quirks);
+
+static ssize_t avoid_reset_quirk_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", !!(udev->quirks & USB_QUIRK_RESET));
+}
+
+static ssize_t avoid_reset_quirk_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct usb_device	*udev = to_usb_device(dev);
+	int			val;
+
+	if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1)
+		return -EINVAL;
+	usb_lock_device(udev);
+	if (val)
+		udev->quirks |= USB_QUIRK_RESET;
+	else
+		udev->quirks &= ~USB_QUIRK_RESET;
+	usb_unlock_device(udev);
+	return count;
+}
+static DEVICE_ATTR_RW(avoid_reset_quirk);
+
+static ssize_t urbnum_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct usb_device *udev;
+
+	udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", atomic_read(&udev->urbnum));
+}
+static DEVICE_ATTR_RO(urbnum);
+
+static ssize_t removable_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_device *udev;
+	char *state;
+
+	udev = to_usb_device(dev);
+
+	switch (udev->removable) {
+	case USB_DEVICE_REMOVABLE:
+		state = "removable";
+		break;
+	case USB_DEVICE_FIXED:
+		state = "fixed";
+		break;
+	default:
+		state = "unknown";
+	}
+
+	return sprintf(buf, "%s\n", state);
+}
+static DEVICE_ATTR_RO(removable);
+
+static ssize_t ltm_capable_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	if (usb_device_supports_ltm(to_usb_device(dev)))
+		return sprintf(buf, "%s\n", "yes");
+	return sprintf(buf, "%s\n", "no");
+}
+static DEVICE_ATTR_RO(ltm_capable);
+
+#ifdef	CONFIG_PM
+
+static ssize_t persist_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	return sprintf(buf, "%d\n", udev->persist_enabled);
+}
+
+static ssize_t persist_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int value;
+
+	/* Hubs are always enabled for USB_PERSIST */
+	if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (sscanf(buf, "%d", &value) != 1)
+		return -EINVAL;
+
+	usb_lock_device(udev);
+	udev->persist_enabled = !!value;
+	usb_unlock_device(udev);
+	return count;
+}
+static DEVICE_ATTR_RW(persist);
+
+static int add_persist_attributes(struct device *dev)
+{
+	int rc = 0;
+
+	if (is_usb_device(dev)) {
+		struct usb_device *udev = to_usb_device(dev);
+
+		/* Hubs are automatically enabled for USB_PERSIST,
+		 * no point in creating the attribute file.
+		 */
+		if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
+			rc = sysfs_add_file_to_group(&dev->kobj,
+					&dev_attr_persist.attr,
+					power_group_name);
+	}
+	return rc;
+}
+
+static void remove_persist_attributes(struct device *dev)
+{
+	sysfs_remove_file_from_group(&dev->kobj,
+			&dev_attr_persist.attr,
+			power_group_name);
+}
+
+static ssize_t connected_duration_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	return sprintf(buf, "%u\n",
+			jiffies_to_msecs(jiffies - udev->connect_time));
+}
+static DEVICE_ATTR_RO(connected_duration);
+
+/*
+ * If the device is resumed, the last time the device was suspended has
+ * been pre-subtracted from active_duration.  We add the current time to
+ * get the duration that the device was actually active.
+ *
+ * If the device is suspended, the active_duration is up-to-date.
+ */
+static ssize_t active_duration_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int duration;
+
+	if (udev->state != USB_STATE_SUSPENDED)
+		duration = jiffies_to_msecs(jiffies + udev->active_duration);
+	else
+		duration = jiffies_to_msecs(udev->active_duration);
+	return sprintf(buf, "%u\n", duration);
+}
+static DEVICE_ATTR_RO(active_duration);
+
+static ssize_t autosuspend_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", dev->power.autosuspend_delay / 1000);
+}
+
+static ssize_t autosuspend_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	int value;
+
+	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/1000 ||
+			value <= -INT_MAX/1000)
+		return -EINVAL;
+
+	pm_runtime_set_autosuspend_delay(dev, value * 1000);
+	return count;
+}
+static DEVICE_ATTR_RW(autosuspend);
+
+static const char on_string[] = "on";
+static const char auto_string[] = "auto";
+
+static void warn_level(void)
+{
+	static int level_warned;
+
+	if (!level_warned) {
+		level_warned = 1;
+		printk(KERN_WARNING "WARNING! power/level is deprecated; "
+				"use power/control instead\n");
+	}
+}
+
+static ssize_t level_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p = auto_string;
+
+	warn_level();
+	if (udev->state != USB_STATE_SUSPENDED && !udev->dev.power.runtime_auto)
+		p = on_string;
+	return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t level_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int len = count;
+	char *cp;
+	int rc = count;
+
+	warn_level();
+	cp = memchr(buf, '\n', count);
+	if (cp)
+		len = cp - buf;
+
+	usb_lock_device(udev);
+
+	if (len == sizeof on_string - 1 &&
+			strncmp(buf, on_string, len) == 0)
+		usb_disable_autosuspend(udev);
+
+	else if (len == sizeof auto_string - 1 &&
+			strncmp(buf, auto_string, len) == 0)
+		usb_enable_autosuspend(udev);
+
+	else
+		rc = -EINVAL;
+
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_RW(level);
+
+static ssize_t usb2_hardware_lpm_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+
+	if (udev->usb2_hw_lpm_allowed == 1)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t usb2_hardware_lpm_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	bool value;
+	int ret;
+
+	usb_lock_device(udev);
+
+	ret = strtobool(buf, &value);
+
+	if (!ret) {
+		udev->usb2_hw_lpm_allowed = value;
+		ret = usb_set_usb2_hardware_lpm(udev, value);
+	}
+
+	usb_unlock_device(udev);
+
+	if (!ret)
+		return count;
+
+	return ret;
+}
+static DEVICE_ATTR_RW(usb2_hardware_lpm);
+
+static ssize_t usb2_lpm_l1_timeout_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", udev->l1_params.timeout);
+}
+
+static ssize_t usb2_lpm_l1_timeout_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	u16 timeout;
+
+	if (kstrtou16(buf, 0, &timeout))
+		return -EINVAL;
+
+	udev->l1_params.timeout = timeout;
+
+	return count;
+}
+static DEVICE_ATTR_RW(usb2_lpm_l1_timeout);
+
+static ssize_t usb2_lpm_besl_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	return sprintf(buf, "%d\n", udev->l1_params.besl);
+}
+
+static ssize_t usb2_lpm_besl_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	u8 besl;
+
+	if (kstrtou8(buf, 0, &besl) || besl > 15)
+		return -EINVAL;
+
+	udev->l1_params.besl = besl;
+
+	return count;
+}
+static DEVICE_ATTR_RW(usb2_lpm_besl);
+
+static struct attribute *usb2_hardware_lpm_attr[] = {
+	&dev_attr_usb2_hardware_lpm.attr,
+	&dev_attr_usb2_lpm_l1_timeout.attr,
+	&dev_attr_usb2_lpm_besl.attr,
+	NULL,
+};
+static struct attribute_group usb2_hardware_lpm_attr_group = {
+	.name	= power_group_name,
+	.attrs	= usb2_hardware_lpm_attr,
+};
+
+static struct attribute *power_attrs[] = {
+	&dev_attr_autosuspend.attr,
+	&dev_attr_level.attr,
+	&dev_attr_connected_duration.attr,
+	&dev_attr_active_duration.attr,
+	NULL,
+};
+static struct attribute_group power_attr_group = {
+	.name	= power_group_name,
+	.attrs	= power_attrs,
+};
+
+static int add_power_attributes(struct device *dev)
+{
+	int rc = 0;
+
+	if (is_usb_device(dev)) {
+		struct usb_device *udev = to_usb_device(dev);
+		rc = sysfs_merge_group(&dev->kobj, &power_attr_group);
+		if (udev->usb2_hw_lpm_capable == 1)
+			rc = sysfs_merge_group(&dev->kobj,
+					&usb2_hardware_lpm_attr_group);
+	}
+
+	return rc;
+}
+
+static void remove_power_attributes(struct device *dev)
+{
+	sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group);
+	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
+}
+
+#else
+
+#define add_persist_attributes(dev)	0
+#define remove_persist_attributes(dev)	do {} while (0)
+
+#define add_power_attributes(dev)	0
+#define remove_power_attributes(dev)	do {} while (0)
+
+#endif	/* CONFIG_PM */
+
+
+/* Descriptor fields */
+#define usb_descriptor_attr_le16(field, format_string)			\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_device *udev;					\
+									\
+	udev = to_usb_device(dev);					\
+	return sprintf(buf, format_string, 				\
+			le16_to_cpu(udev->descriptor.field));		\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_descriptor_attr_le16(idVendor, "%04x\n");
+usb_descriptor_attr_le16(idProduct, "%04x\n");
+usb_descriptor_attr_le16(bcdDevice, "%04x\n");
+
+#define usb_descriptor_attr(field, format_string)			\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_device *udev;					\
+									\
+	udev = to_usb_device(dev);					\
+	return sprintf(buf, format_string, udev->descriptor.field);	\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_descriptor_attr(bDeviceClass, "%02x\n");
+usb_descriptor_attr(bDeviceSubClass, "%02x\n");
+usb_descriptor_attr(bDeviceProtocol, "%02x\n");
+usb_descriptor_attr(bNumConfigurations, "%d\n");
+usb_descriptor_attr(bMaxPacketSize0, "%d\n");
+
+
+/* show if the device is authorized (1) or not (0) */
+static ssize_t authorized_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct usb_device *usb_dev = to_usb_device(dev);
+	return snprintf(buf, PAGE_SIZE, "%u\n", usb_dev->authorized);
+}
+
+/*
+ * Authorize a device to be used in the system
+ *
+ * Writing a 0 deauthorizes the device, writing a 1 authorizes it.
+ */
+static ssize_t authorized_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t size)
+{
+	ssize_t result;
+	struct usb_device *usb_dev = to_usb_device(dev);
+	unsigned val;
+	result = sscanf(buf, "%u\n", &val);
+	if (result != 1)
+		result = -EINVAL;
+	else if (val == 0)
+		result = usb_deauthorize_device(usb_dev);
+	else
+		result = usb_authorize_device(usb_dev);
+	return result < 0 ? result : size;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
+				  authorized_show, authorized_store);
+
+/* "Safely remove a device" */
+static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	int rc = 0;
+
+	usb_lock_device(udev);
+	if (udev->state != USB_STATE_NOTATTACHED) {
+
+		/* To avoid races, first unconfigure and then remove */
+		usb_set_configuration(udev, -1);
+		rc = usb_remove_device(udev);
+	}
+	if (rc == 0)
+		rc = count;
+	usb_unlock_device(udev);
+	return rc;
+}
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, S_IWUSR, NULL, remove_store);
+
+
+static struct attribute *dev_attrs[] = {
+	/* current configuration's attributes */
+	&dev_attr_configuration.attr,
+	&dev_attr_bNumInterfaces.attr,
+	&dev_attr_bConfigurationValue.attr,
+	&dev_attr_bmAttributes.attr,
+	&dev_attr_bMaxPower.attr,
+	/* device attributes */
+	&dev_attr_urbnum.attr,
+	&dev_attr_idVendor.attr,
+	&dev_attr_idProduct.attr,
+	&dev_attr_bcdDevice.attr,
+	&dev_attr_bDeviceClass.attr,
+	&dev_attr_bDeviceSubClass.attr,
+	&dev_attr_bDeviceProtocol.attr,
+	&dev_attr_bNumConfigurations.attr,
+	&dev_attr_bMaxPacketSize0.attr,
+	&dev_attr_speed.attr,
+	&dev_attr_busnum.attr,
+	&dev_attr_devnum.attr,
+	&dev_attr_devpath.attr,
+	&dev_attr_version.attr,
+	&dev_attr_maxchild.attr,
+	&dev_attr_quirks.attr,
+	&dev_attr_avoid_reset_quirk.attr,
+	&dev_attr_authorized.attr,
+	&dev_attr_remove.attr,
+	&dev_attr_removable.attr,
+	&dev_attr_ltm_capable.attr,
+	NULL,
+};
+static struct attribute_group dev_attr_grp = {
+	.attrs = dev_attrs,
+};
+
+/* When modifying this list, be sure to modify dev_string_attrs_are_visible()
+ * accordingly.
+ */
+static struct attribute *dev_string_attrs[] = {
+	&dev_attr_manufacturer.attr,
+	&dev_attr_product.attr,
+	&dev_attr_serial.attr,
+	NULL
+};
+
+static umode_t dev_string_attrs_are_visible(struct kobject *kobj,
+		struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_device *udev = to_usb_device(dev);
+
+	if (a == &dev_attr_manufacturer.attr) {
+		if (udev->manufacturer == NULL)
+			return 0;
+	} else if (a == &dev_attr_product.attr) {
+		if (udev->product == NULL)
+			return 0;
+	} else if (a == &dev_attr_serial.attr) {
+		if (udev->serial == NULL)
+			return 0;
+	}
+	return a->mode;
+}
+
+static struct attribute_group dev_string_attr_grp = {
+	.attrs =	dev_string_attrs,
+	.is_visible =	dev_string_attrs_are_visible,
+};
+
+const struct attribute_group *usb_device_groups[] = {
+	&dev_attr_grp,
+	&dev_string_attr_grp,
+	NULL
+};
+
+/* Binary descriptors */
+
+static ssize_t
+read_descriptors(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t off, size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_device *udev = to_usb_device(dev);
+	size_t nleft = count;
+	size_t srclen, n;
+	int cfgno;
+	void *src;
+
+	/* The binary attribute begins with the device descriptor.
+	 * Following that are the raw descriptor entries for all the
+	 * configurations (config plus subsidiary descriptors).
+	 */
+	usb_lock_device(udev);
+	for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+			nleft > 0; ++cfgno) {
+		if (cfgno < 0) {
+			src = &udev->descriptor;
+			srclen = sizeof(struct usb_device_descriptor);
+		} else {
+			src = udev->rawdescriptors[cfgno];
+			srclen = __le16_to_cpu(udev->config[cfgno].desc.
+					wTotalLength);
+		}
+		if (off < srclen) {
+			n = min(nleft, srclen - (size_t) off);
+			memcpy(buf, src + off, n);
+			nleft -= n;
+			buf += n;
+			off = 0;
+		} else {
+			off -= srclen;
+		}
+	}
+	usb_unlock_device(udev);
+	return count - nleft;
+}
+
+static struct bin_attribute dev_bin_attr_descriptors = {
+	.attr = {.name = "descriptors", .mode = 0444},
+	.read = read_descriptors,
+	.size = 18 + 65535,	/* dev descr + max-size raw descriptor */
+};
+
+int usb_create_sysfs_dev_files(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+	int retval;
+
+	retval = device_create_bin_file(dev, &dev_bin_attr_descriptors);
+	if (retval)
+		goto error;
+
+	retval = add_persist_attributes(dev);
+	if (retval)
+		goto error;
+
+	retval = add_power_attributes(dev);
+	if (retval)
+		goto error;
+	return retval;
+error:
+	usb_remove_sysfs_dev_files(udev);
+	return retval;
+}
+
+void usb_remove_sysfs_dev_files(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+
+	remove_power_attributes(dev);
+	remove_persist_attributes(dev);
+	device_remove_bin_file(dev, &dev_bin_attr_descriptors);
+}
+
+/* Interface Association Descriptor fields */
+#define usb_intf_assoc_attr(field, format_string)			\
+static ssize_t								\
+iad_##field##_show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	struct usb_interface *intf = to_usb_interface(dev);		\
+									\
+	return sprintf(buf, format_string,				\
+			intf->intf_assoc->field); 			\
+}									\
+static DEVICE_ATTR_RO(iad_##field)
+
+usb_intf_assoc_attr(bFirstInterface, "%02x\n");
+usb_intf_assoc_attr(bInterfaceCount, "%02d\n");
+usb_intf_assoc_attr(bFunctionClass, "%02x\n");
+usb_intf_assoc_attr(bFunctionSubClass, "%02x\n");
+usb_intf_assoc_attr(bFunctionProtocol, "%02x\n");
+
+/* Interface fields */
+#define usb_intf_attr(field, format_string)				\
+static ssize_t								\
+field##_show(struct device *dev, struct device_attribute *attr,		\
+		char *buf)						\
+{									\
+	struct usb_interface *intf = to_usb_interface(dev);		\
+									\
+	return sprintf(buf, format_string,				\
+			intf->cur_altsetting->desc.field); 		\
+}									\
+static DEVICE_ATTR_RO(field)
+
+usb_intf_attr(bInterfaceNumber, "%02x\n");
+usb_intf_attr(bAlternateSetting, "%2d\n");
+usb_intf_attr(bNumEndpoints, "%02x\n");
+usb_intf_attr(bInterfaceClass, "%02x\n");
+usb_intf_attr(bInterfaceSubClass, "%02x\n");
+usb_intf_attr(bInterfaceProtocol, "%02x\n");
+
+static ssize_t interface_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct usb_interface *intf;
+	char *string;
+
+	intf = to_usb_interface(dev);
+	string = ACCESS_ONCE(intf->cur_altsetting->string);
+	if (!string)
+		return 0;
+	return sprintf(buf, "%s\n", string);
+}
+static DEVICE_ATTR_RO(interface);
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	struct usb_host_interface *alt;
+
+	intf = to_usb_interface(dev);
+	udev = interface_to_usbdev(intf);
+	alt = ACCESS_ONCE(intf->cur_altsetting);
+
+	return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
+			"ic%02Xisc%02Xip%02Xin%02X\n",
+			le16_to_cpu(udev->descriptor.idVendor),
+			le16_to_cpu(udev->descriptor.idProduct),
+			le16_to_cpu(udev->descriptor.bcdDevice),
+			udev->descriptor.bDeviceClass,
+			udev->descriptor.bDeviceSubClass,
+			udev->descriptor.bDeviceProtocol,
+			alt->desc.bInterfaceClass,
+			alt->desc.bInterfaceSubClass,
+			alt->desc.bInterfaceProtocol,
+			alt->desc.bInterfaceNumber);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static ssize_t supports_autosuspend_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	int s;
+
+	device_lock(dev);
+	/* Devices will be autosuspended even when an interface isn't claimed */
+	s = (!dev->driver || to_usb_driver(dev->driver)->supports_autosuspend);
+	device_unlock(dev);
+
+	return sprintf(buf, "%u\n", s);
+}
+static DEVICE_ATTR_RO(supports_autosuspend);
+
+static struct attribute *intf_attrs[] = {
+	&dev_attr_bInterfaceNumber.attr,
+	&dev_attr_bAlternateSetting.attr,
+	&dev_attr_bNumEndpoints.attr,
+	&dev_attr_bInterfaceClass.attr,
+	&dev_attr_bInterfaceSubClass.attr,
+	&dev_attr_bInterfaceProtocol.attr,
+	&dev_attr_modalias.attr,
+	&dev_attr_supports_autosuspend.attr,
+	NULL,
+};
+static struct attribute_group intf_attr_grp = {
+	.attrs = intf_attrs,
+};
+
+static struct attribute *intf_assoc_attrs[] = {
+	&dev_attr_iad_bFirstInterface.attr,
+	&dev_attr_iad_bInterfaceCount.attr,
+	&dev_attr_iad_bFunctionClass.attr,
+	&dev_attr_iad_bFunctionSubClass.attr,
+	&dev_attr_iad_bFunctionProtocol.attr,
+	NULL,
+};
+
+static umode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
+		struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	if (intf->intf_assoc == NULL)
+		return 0;
+	return a->mode;
+}
+
+static struct attribute_group intf_assoc_attr_grp = {
+	.attrs =	intf_assoc_attrs,
+	.is_visible =	intf_assoc_attrs_are_visible,
+};
+
+const struct attribute_group *usb_interface_groups[] = {
+	&intf_attr_grp,
+	&intf_assoc_attr_grp,
+	NULL
+};
+
+void usb_create_sysfs_intf_files(struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *alt = intf->cur_altsetting;
+
+	if (intf->sysfs_files_created || intf->unregistering)
+		return;
+
+	if (!alt->string && !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+		alt->string = usb_cache_string(udev, alt->desc.iInterface);
+	if (alt->string && device_create_file(&intf->dev, &dev_attr_interface))
+		;	/* We don't actually care if the function fails. */
+	intf->sysfs_files_created = 1;
+}
+
+void usb_remove_sysfs_intf_files(struct usb_interface *intf)
+{
+	if (!intf->sysfs_files_created)
+		return;
+
+	device_remove_file(&intf->dev, &dev_attr_interface);
+	intf->sysfs_files_created = 0;
+}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
new file mode 100644
index 000000000..c9e8ee81b
--- /dev/null
+++ b/drivers/usb/core/urb.c
@@ -0,0 +1,969 @@
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
+
+#define to_urb(d) container_of(d, struct urb, kref)
+
+
+static void urb_destroy(struct kref *kref)
+{
+	struct urb *urb = to_urb(kref);
+
+	if (urb->transfer_flags & URB_FREE_BUFFER)
+		kfree(urb->transfer_buffer);
+
+	kfree(urb);
+}
+
+/**
+ * usb_init_urb - initializes a urb so that it can be used by a USB driver
+ * @urb: pointer to the urb to initialize
+ *
+ * Initializes a urb so that the USB subsystem can use it properly.
+ *
+ * If a urb is created with a call to usb_alloc_urb() it is not
+ * necessary to call this function.  Only use this if you allocate the
+ * space for a struct urb on your own.  If you call this function, be
+ * careful when freeing the memory for your urb that it is no longer in
+ * use by the USB core.
+ *
+ * Only use this function if you _really_ understand what you are doing.
+ */
+void usb_init_urb(struct urb *urb)
+{
+	if (urb) {
+		memset(urb, 0, sizeof(*urb));
+		kref_init(&urb->kref);
+		INIT_LIST_HEAD(&urb->anchor_list);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_init_urb);
+
+/**
+ * usb_alloc_urb - creates a new urb for a USB driver to use
+ * @iso_packets: number of iso packets for this urb
+ * @mem_flags: the type of memory to allocate, see kmalloc() for a list of
+ *	valid options for this.
+ *
+ * Creates an urb for the USB driver to use, initializes a few internal
+ * structures, increments the usage counter, and returns a pointer to it.
+ *
+ * If the driver want to use this urb for interrupt, control, or bulk
+ * endpoints, pass '0' as the number of iso packets.
+ *
+ * The driver must call usb_free_urb() when it is finished with the urb.
+ *
+ * Return: A pointer to the new urb, or %NULL if no memory is available.
+ */
+struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
+{
+	struct urb *urb;
+
+	urb = kmalloc(sizeof(struct urb) +
+		iso_packets * sizeof(struct usb_iso_packet_descriptor),
+		mem_flags);
+	if (!urb) {
+		printk(KERN_ERR "alloc_urb: kmalloc failed\n");
+		return NULL;
+	}
+	usb_init_urb(urb);
+	return urb;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_urb);
+
+/**
+ * usb_free_urb - frees the memory used by a urb when all users of it are finished
+ * @urb: pointer to the urb to free, may be NULL
+ *
+ * Must be called when a user of a urb is finished with it.  When the last user
+ * of the urb calls this function, the memory of the urb is freed.
+ *
+ * Note: The transfer buffer associated with the urb is not freed unless the
+ * URB_FREE_BUFFER transfer flag is set.
+ */
+void usb_free_urb(struct urb *urb)
+{
+	if (urb)
+		kref_put(&urb->kref, urb_destroy);
+}
+EXPORT_SYMBOL_GPL(usb_free_urb);
+
+/**
+ * usb_get_urb - increments the reference count of the urb
+ * @urb: pointer to the urb to modify, may be NULL
+ *
+ * This must be  called whenever a urb is transferred from a device driver to a
+ * host controller driver.  This allows proper reference counting to happen
+ * for urbs.
+ *
+ * Return: A pointer to the urb with the incremented reference counter.
+ */
+struct urb *usb_get_urb(struct urb *urb)
+{
+	if (urb)
+		kref_get(&urb->kref);
+	return urb;
+}
+EXPORT_SYMBOL_GPL(usb_get_urb);
+
+/**
+ * usb_anchor_urb - anchors an URB while it is processed
+ * @urb: pointer to the urb to anchor
+ * @anchor: pointer to the anchor
+ *
+ * This can be called to have access to URBs which are to be executed
+ * without bothering to track them
+ */
+void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	usb_get_urb(urb);
+	list_add_tail(&urb->anchor_list, &anchor->urb_list);
+	urb->anchor = anchor;
+
+	if (unlikely(anchor->poisoned)) {
+		atomic_inc(&urb->reject);
+	}
+
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_urb);
+
+static int usb_anchor_check_wakeup(struct usb_anchor *anchor)
+{
+	return atomic_read(&anchor->suspend_wakeups) == 0 &&
+		list_empty(&anchor->urb_list);
+}
+
+/* Callers must hold anchor->lock */
+static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor)
+{
+	urb->anchor = NULL;
+	list_del(&urb->anchor_list);
+	usb_put_urb(urb);
+	if (usb_anchor_check_wakeup(anchor))
+		wake_up(&anchor->wait);
+}
+
+/**
+ * usb_unanchor_urb - unanchors an URB
+ * @urb: pointer to the urb to anchor
+ *
+ * Call this to stop the system keeping track of this URB
+ */
+void usb_unanchor_urb(struct urb *urb)
+{
+	unsigned long flags;
+	struct usb_anchor *anchor;
+
+	if (!urb)
+		return;
+
+	anchor = urb->anchor;
+	if (!anchor)
+		return;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	/*
+	 * At this point, we could be competing with another thread which
+	 * has the same intention. To protect the urb from being unanchored
+	 * twice, only the winner of the race gets the job.
+	 */
+	if (likely(anchor == urb->anchor))
+		__usb_unanchor_urb(urb, anchor);
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_unanchor_urb);
+
+/*-------------------------------------------------------------------*/
+
+/**
+ * usb_submit_urb - issue an asynchronous transfer request for an endpoint
+ * @urb: pointer to the urb describing the request
+ * @mem_flags: the type of memory to allocate, see kmalloc() for a list
+ *	of valid options for this.
+ *
+ * This submits a transfer request, and transfers control of the URB
+ * describing that request to the USB subsystem.  Request completion will
+ * be indicated later, asynchronously, by calling the completion handler.
+ * The three types of completion are success, error, and unlink
+ * (a software-induced fault, also called "request cancellation").
+ *
+ * URBs may be submitted in interrupt context.
+ *
+ * The caller must have correctly initialized the URB before submitting
+ * it.  Functions such as usb_fill_bulk_urb() and usb_fill_control_urb() are
+ * available to ensure that most fields are correctly initialized, for
+ * the particular kind of transfer, although they will not initialize
+ * any transfer flags.
+ *
+ * If the submission is successful, the complete() callback from the URB
+ * will be called exactly once, when the USB core and Host Controller Driver
+ * (HCD) are finished with the URB.  When the completion function is called,
+ * control of the URB is returned to the device driver which issued the
+ * request.  The completion handler may then immediately free or reuse that
+ * URB.
+ *
+ * With few exceptions, USB device drivers should never access URB fields
+ * provided by usbcore or the HCD until its complete() is called.
+ * The exceptions relate to periodic transfer scheduling.  For both
+ * interrupt and isochronous urbs, as part of successful URB submission
+ * urb->interval is modified to reflect the actual transfer period used
+ * (normally some power of two units).  And for isochronous urbs,
+ * urb->start_frame is modified to reflect when the URB's transfers were
+ * scheduled to start.
+ *
+ * Not all isochronous transfer scheduling policies will work, but most
+ * host controller drivers should easily handle ISO queues going from now
+ * until 10-200 msec into the future.  Drivers should try to keep at
+ * least one or two msec of data in the queue; many controllers require
+ * that new transfers start at least 1 msec in the future when they are
+ * added.  If the driver is unable to keep up and the queue empties out,
+ * the behavior for new submissions is governed by the URB_ISO_ASAP flag.
+ * If the flag is set, or if the queue is idle, then the URB is always
+ * assigned to the first available (and not yet expired) slot in the
+ * endpoint's schedule.  If the flag is not set and the queue is active
+ * then the URB is always assigned to the next slot in the schedule
+ * following the end of the endpoint's previous URB, even if that slot is
+ * in the past.  When a packet is assigned in this way to a slot that has
+ * already expired, the packet is not transmitted and the corresponding
+ * usb_iso_packet_descriptor's status field will return -EXDEV.  If this
+ * would happen to all the packets in the URB, submission fails with a
+ * -EXDEV error code.
+ *
+ * For control endpoints, the synchronous usb_control_msg() call is
+ * often used (in non-interrupt context) instead of this call.
+ * That is often used through convenience wrappers, for the requests
+ * that are standardized in the USB 2.0 specification.  For bulk
+ * endpoints, a synchronous usb_bulk_msg() call is available.
+ *
+ * Return:
+ * 0 on successful submissions. A negative error number otherwise.
+ *
+ * Request Queuing:
+ *
+ * URBs may be submitted to endpoints before previous ones complete, to
+ * minimize the impact of interrupt latencies and system overhead on data
+ * throughput.  With that queuing policy, an endpoint's queue would never
+ * be empty.  This is required for continuous isochronous data streams,
+ * and may also be required for some kinds of interrupt transfers. Such
+ * queuing also maximizes bandwidth utilization by letting USB controllers
+ * start work on later requests before driver software has finished the
+ * completion processing for earlier (successful) requests.
+ *
+ * As of Linux 2.6, all USB endpoint transfer queues support depths greater
+ * than one.  This was previously a HCD-specific behavior, except for ISO
+ * transfers.  Non-isochronous endpoint queues are inactive during cleanup
+ * after faults (transfer errors or cancellation).
+ *
+ * Reserved Bandwidth Transfers:
+ *
+ * Periodic transfers (interrupt or isochronous) are performed repeatedly,
+ * using the interval specified in the urb.  Submitting the first urb to
+ * the endpoint reserves the bandwidth necessary to make those transfers.
+ * If the USB subsystem can't allocate sufficient bandwidth to perform
+ * the periodic request, submitting such a periodic request should fail.
+ *
+ * For devices under xHCI, the bandwidth is reserved at configuration time, or
+ * when the alt setting is selected.  If there is not enough bus bandwidth, the
+ * configuration/alt setting request will fail.  Therefore, submissions to
+ * periodic endpoints on devices under xHCI should never fail due to bandwidth
+ * constraints.
+ *
+ * Device drivers must explicitly request that repetition, by ensuring that
+ * some URB is always on the endpoint's queue (except possibly for short
+ * periods during completion callbacks).  When there is no longer an urb
+ * queued, the endpoint's bandwidth reservation is canceled.  This means
+ * drivers can use their completion handlers to ensure they keep bandwidth
+ * they need, by reinitializing and resubmitting the just-completed urb
+ * until the driver longer needs that periodic bandwidth.
+ *
+ * Memory Flags:
+ *
+ * The general rules for how to decide which mem_flags to use
+ * are the same as for kmalloc.  There are four
+ * different possible values; GFP_KERNEL, GFP_NOFS, GFP_NOIO and
+ * GFP_ATOMIC.
+ *
+ * GFP_NOFS is not ever used, as it has not been implemented yet.
+ *
+ * GFP_ATOMIC is used when
+ *   (a) you are inside a completion handler, an interrupt, bottom half,
+ *       tasklet or timer, or
+ *   (b) you are holding a spinlock or rwlock (does not apply to
+ *       semaphores), or
+ *   (c) current->state != TASK_RUNNING, this is the case only after
+ *       you've changed it.
+ *
+ * GFP_NOIO is used in the block io path and error handling of storage
+ * devices.
+ *
+ * All other situations use GFP_KERNEL.
+ *
+ * Some more specific rules for mem_flags can be inferred, such as
+ *  (1) start_xmit, timeout, and receive methods of network drivers must
+ *      use GFP_ATOMIC (they are called with a spinlock held);
+ *  (2) queuecommand methods of scsi drivers must use GFP_ATOMIC (also
+ *      called with a spinlock held);
+ *  (3) If you use a kernel thread with a network driver you must use
+ *      GFP_NOIO, unless (b) or (c) apply;
+ *  (4) after you have done a down() you can use GFP_KERNEL, unless (b) or (c)
+ *      apply or your are in a storage driver's block io path;
+ *  (5) USB probe and disconnect can use GFP_KERNEL unless (b) or (c) apply; and
+ *  (6) changing firmware on a running storage or net device uses
+ *      GFP_NOIO, unless b) or c) apply
+ *
+ */
+int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
+{
+	static int			pipetypes[4] = {
+		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
+	};
+	int				xfertype, max;
+	struct usb_device		*dev;
+	struct usb_host_endpoint	*ep;
+	int				is_out;
+	unsigned int			allowed;
+
+	if (!urb || !urb->complete)
+		return -EINVAL;
+	if (urb->hcpriv) {
+		WARN_ONCE(1, "URB %p submitted while active\n", urb);
+		return -EBUSY;
+	}
+
+	dev = urb->dev;
+	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
+		return -ENODEV;
+
+	/* For now, get the endpoint from the pipe.  Eventually drivers
+	 * will be required to set urb->ep directly and we will eliminate
+	 * urb->pipe.
+	 */
+	ep = usb_pipe_endpoint(dev, urb->pipe);
+	if (!ep)
+		return -ENOENT;
+
+	urb->ep = ep;
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+
+	/* Lots of sanity checks, so HCDs can rely on clean data
+	 * and don't need to duplicate tests
+	 */
+	xfertype = usb_endpoint_type(&ep->desc);
+	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+		struct usb_ctrlrequest *setup =
+				(struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!setup)
+			return -ENOEXEC;
+		is_out = !(setup->bRequestType & USB_DIR_IN) ||
+				!setup->wLength;
+	} else {
+		is_out = usb_endpoint_dir_out(&ep->desc);
+	}
+
+	/* Clear the internal flags and cache the direction for later use */
+	urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE |
+			URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL |
+			URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
+			URB_DMA_SG_COMBINED);
+	urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN);
+
+	if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
+			dev->state < USB_STATE_CONFIGURED)
+		return -ENODEV;
+
+	max = usb_endpoint_maxp(&ep->desc);
+	if (max <= 0) {
+		dev_dbg(&dev->dev,
+			"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
+			usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
+			__func__, max);
+		return -EMSGSIZE;
+	}
+
+	/* periodic transfers limit size per frame/uframe,
+	 * but drivers only control those sizes for ISO.
+	 * while we're checking, initialize return status.
+	 */
+	if (xfertype == USB_ENDPOINT_XFER_ISOC) {
+		int	n, len;
+
+		/* SuperSpeed isoc endpoints have up to 16 bursts of up to
+		 * 3 packets each
+		 */
+		if (dev->speed == USB_SPEED_SUPER) {
+			int     burst = 1 + ep->ss_ep_comp.bMaxBurst;
+			int     mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
+			max *= burst;
+			max *= mult;
+		}
+
+		/* "high bandwidth" mode, 1-3 packets/uframe? */
+		if (dev->speed == USB_SPEED_HIGH) {
+			int	mult = 1 + ((max >> 11) & 0x03);
+			max &= 0x07ff;
+			max *= mult;
+		}
+
+		if (urb->number_of_packets <= 0)
+			return -EINVAL;
+		for (n = 0; n < urb->number_of_packets; n++) {
+			len = urb->iso_frame_desc[n].length;
+			if (len < 0 || len > max)
+				return -EMSGSIZE;
+			urb->iso_frame_desc[n].status = -EXDEV;
+			urb->iso_frame_desc[n].actual_length = 0;
+		}
+	} else if (urb->num_sgs && !urb->dev->bus->no_sg_constraint &&
+			dev->speed != USB_SPEED_WIRELESS) {
+		struct scatterlist *sg;
+		int i;
+
+		for_each_sg(urb->sg, sg, urb->num_sgs - 1, i)
+			if (sg->length % max)
+				return -EINVAL;
+	}
+
+	/* the I/O buffer must be mapped/unmapped, except when length=0 */
+	if (urb->transfer_buffer_length > INT_MAX)
+		return -EMSGSIZE;
+
+	/*
+	 * stuff that drivers shouldn't do, but which shouldn't
+	 * cause problems in HCDs if they get it wrong.
+	 */
+
+	/* Check that the pipe's type matches the endpoint's type */
+	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+		dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
+			usb_pipetype(urb->pipe), pipetypes[xfertype]);
+
+	/* Check against a simple/standard policy */
+	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
+			URB_FREE_BUFFER);
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		if (is_out)
+			allowed |= URB_ZERO_PACKET;
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_CONTROL:
+		allowed |= URB_NO_FSBR;	/* only affects UHCI */
+		/* FALLTHROUGH */
+	default:			/* all non-iso endpoints */
+		if (!is_out)
+			allowed |= URB_SHORT_NOT_OK;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		allowed |= URB_ISO_ASAP;
+		break;
+	}
+	allowed &= urb->transfer_flags;
+
+	/* warn if submitter gave bogus flags */
+	if (allowed != urb->transfer_flags)
+		dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n",
+			urb->transfer_flags, allowed);
+
+	/*
+	 * Force periodic transfer intervals to be legal values that are
+	 * a power of two (so HCDs don't need to).
+	 *
+	 * FIXME want bus->{intr,iso}_sched_horizon values here.  Each HC
+	 * supports different values... this uses EHCI/UHCI defaults (and
+	 * EHCI can use smaller non-default values).
+	 */
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		/* too small? */
+		switch (dev->speed) {
+		case USB_SPEED_WIRELESS:
+			if ((urb->interval < 6)
+				&& (xfertype == USB_ENDPOINT_XFER_INT))
+				return -EINVAL;
+		default:
+			if (urb->interval <= 0)
+				return -EINVAL;
+			break;
+		}
+		/* too big? */
+		switch (dev->speed) {
+		case USB_SPEED_SUPER:	/* units are 125us */
+			/* Handle up to 2^(16-1) microframes */
+			if (urb->interval > (1 << 15))
+				return -EINVAL;
+			max = 1 << 15;
+			break;
+		case USB_SPEED_WIRELESS:
+			if (urb->interval > 16)
+				return -EINVAL;
+			break;
+		case USB_SPEED_HIGH:	/* units are microframes */
+			/* NOTE usb handles 2^15 */
+			if (urb->interval > (1024 * 8))
+				urb->interval = 1024 * 8;
+			max = 1024 * 8;
+			break;
+		case USB_SPEED_FULL:	/* units are frames/msec */
+		case USB_SPEED_LOW:
+			if (xfertype == USB_ENDPOINT_XFER_INT) {
+				if (urb->interval > 255)
+					return -EINVAL;
+				/* NOTE ohci only handles up to 32 */
+				max = 128;
+			} else {
+				if (urb->interval > 1024)
+					urb->interval = 1024;
+				/* NOTE usb and ohci handle up to 2^15 */
+				max = 1024;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+		if (dev->speed != USB_SPEED_WIRELESS) {
+			/* Round down to a power of 2, no more than max */
+			urb->interval = min(max, 1 << ilog2(urb->interval));
+		}
+	}
+
+	return usb_hcd_submit_urb(urb, mem_flags);
+}
+EXPORT_SYMBOL_GPL(usb_submit_urb);
+
+/*-------------------------------------------------------------------*/
+
+/**
+ * usb_unlink_urb - abort/cancel a transfer request for an endpoint
+ * @urb: pointer to urb describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  URBs complete only once
+ * per submission, and may be canceled only once per submission.
+ * Successful cancellation means termination of @urb will be expedited
+ * and the completion handler will be called with a status code
+ * indicating that the request has been canceled (rather than any other
+ * code).
+ *
+ * Drivers should not call this routine or related routines, such as
+ * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect
+ * method has returned.  The disconnect function should synchronize with
+ * a driver's I/O routines to insure that all URB-related activity has
+ * completed before it returns.
+ *
+ * This request is asynchronous, however the HCD might call the ->complete()
+ * callback during unlink. Therefore when drivers call usb_unlink_urb(), they
+ * must not hold any locks that may be taken by the completion function.
+ * Success is indicated by returning -EINPROGRESS, at which time the URB will
+ * probably not yet have been given back to the device driver. When it is
+ * eventually called, the completion function will see @urb->status ==
+ * -ECONNRESET.
+ * Failure is indicated by usb_unlink_urb() returning any other value.
+ * Unlinking will fail when @urb is not currently "linked" (i.e., it was
+ * never submitted, or it was unlinked before, or the hardware is already
+ * finished with it), even if the completion handler has not yet run.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * Return: -EINPROGRESS on success. See description for other values on
+ * failure.
+ *
+ * Unlinking and Endpoint Queues:
+ *
+ * [The behaviors and guarantees described below do not apply to virtual
+ * root hubs but only to endpoint queues for physical USB devices.]
+ *
+ * Host Controller Drivers (HCDs) place all the URBs for a particular
+ * endpoint in a queue.  Normally the queue advances as the controller
+ * hardware processes each request.  But when an URB terminates with an
+ * error its queue generally stops (see below), at least until that URB's
+ * completion routine returns.  It is guaranteed that a stopped queue
+ * will not restart until all its unlinked URBs have been fully retired,
+ * with their completion routines run, even if that's not until some time
+ * after the original completion handler returns.  The same behavior and
+ * guarantee apply when an URB terminates because it was unlinked.
+ *
+ * Bulk and interrupt endpoint queues are guaranteed to stop whenever an
+ * URB terminates with any sort of error, including -ECONNRESET, -ENOENT,
+ * and -EREMOTEIO.  Control endpoint queues behave the same way except
+ * that they are not guaranteed to stop for -EREMOTEIO errors.  Queues
+ * for isochronous endpoints are treated differently, because they must
+ * advance at fixed rates.  Such queues do not stop when an URB
+ * encounters an error or is unlinked.  An unlinked isochronous URB may
+ * leave a gap in the stream of packets; it is undefined whether such
+ * gaps can be filled in.
+ *
+ * Note that early termination of an URB because a short packet was
+ * received will generate a -EREMOTEIO error if and only if the
+ * URB_SHORT_NOT_OK flag is set.  By setting this flag, USB device
+ * drivers can build deep queues for large or complex bulk transfers
+ * and clean them up reliably after any sort of aborted transfer by
+ * unlinking all pending URBs at the first fault.
+ *
+ * When a control URB terminates with an error other than -EREMOTEIO, it
+ * is quite likely that the status stage of the transfer will not take
+ * place.
+ */
+int usb_unlink_urb(struct urb *urb)
+{
+	if (!urb)
+		return -EINVAL;
+	if (!urb->dev)
+		return -ENODEV;
+	if (!urb->ep)
+		return -EIDRM;
+	return usb_hcd_unlink_urb(urb, -ECONNRESET);
+}
+EXPORT_SYMBOL_GPL(usb_unlink_urb);
+
+/**
+ * usb_kill_urb - cancel a transfer request and wait for it to finish
+ * @urb: pointer to URB describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  It is guaranteed that
+ * upon return all completion handlers will have finished and the URB
+ * will be totally idle and available for reuse.  These features make
+ * this an ideal way to stop I/O in a disconnect() callback or close()
+ * function.  If the request has not already finished or been unlinked
+ * the completion handler will see urb->status == -ENOENT.
+ *
+ * While the routine is running, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * This routine may not be used in an interrupt context (such as a bottom
+ * half or a completion handler), or when holding a spinlock, or in other
+ * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_kill_urb(struct urb *urb)
+{
+	might_sleep();
+	if (!(urb && urb->dev && urb->ep))
+		return;
+	atomic_inc(&urb->reject);
+
+	usb_hcd_unlink_urb(urb, -ENOENT);
+	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
+
+	atomic_dec(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_kill_urb);
+
+/**
+ * usb_poison_urb - reliably kill a transfer and prevent further use of an URB
+ * @urb: pointer to URB describing a previously submitted request,
+ *	may be NULL
+ *
+ * This routine cancels an in-progress request.  It is guaranteed that
+ * upon return all completion handlers will have finished and the URB
+ * will be totally idle and cannot be reused.  These features make
+ * this an ideal way to stop I/O in a disconnect() callback.
+ * If the request has not already finished or been unlinked
+ * the completion handler will see urb->status == -ENOENT.
+ *
+ * After and while the routine runs, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
+ * This routine may not be used in an interrupt context (such as a bottom
+ * half or a completion handler), or when holding a spinlock, or in other
+ * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_poison_urb(struct urb *urb)
+{
+	might_sleep();
+	if (!urb)
+		return;
+	atomic_inc(&urb->reject);
+
+	if (!urb->dev || !urb->ep)
+		return;
+
+	usb_hcd_unlink_urb(urb, -ENOENT);
+	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
+}
+EXPORT_SYMBOL_GPL(usb_poison_urb);
+
+void usb_unpoison_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_dec(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_unpoison_urb);
+
+/**
+ * usb_block_urb - reliably prevent further use of an URB
+ * @urb: pointer to URB to be blocked, may be NULL
+ *
+ * After the routine has run, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ */
+void usb_block_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_inc(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_block_urb);
+
+/**
+ * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * @anchor: anchor the requests are bound to
+ *
+ * this allows all outstanding URBs to be killed starting
+ * from the back of the queue
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_kill_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+
+	spin_lock_irq(&anchor->lock);
+	while (!list_empty(&anchor->urb_list)) {
+		victim = list_entry(anchor->urb_list.prev, struct urb,
+				    anchor_list);
+		/* we must make sure the URB isn't freed before we kill it*/
+		usb_get_urb(victim);
+		spin_unlock_irq(&anchor->lock);
+		/* this will unanchor the URB */
+		usb_kill_urb(victim);
+		usb_put_urb(victim);
+		spin_lock_irq(&anchor->lock);
+	}
+	spin_unlock_irq(&anchor->lock);
+}
+EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
+
+
+/**
+ * usb_poison_anchored_urbs - cease all traffic from an anchor
+ * @anchor: anchor the requests are bound to
+ *
+ * this allows all outstanding URBs to be poisoned starting
+ * from the back of the queue. Newly added URBs will also be
+ * poisoned
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_poison_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+
+	spin_lock_irq(&anchor->lock);
+	anchor->poisoned = 1;
+	while (!list_empty(&anchor->urb_list)) {
+		victim = list_entry(anchor->urb_list.prev, struct urb,
+				    anchor_list);
+		/* we must make sure the URB isn't freed before we kill it*/
+		usb_get_urb(victim);
+		spin_unlock_irq(&anchor->lock);
+		/* this will unanchor the URB */
+		usb_poison_urb(victim);
+		usb_put_urb(victim);
+		spin_lock_irq(&anchor->lock);
+	}
+	spin_unlock_irq(&anchor->lock);
+}
+EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
+
+/**
+ * usb_unpoison_anchored_urbs - let an anchor be used successfully again
+ * @anchor: anchor the requests are bound to
+ *
+ * Reverses the effect of usb_poison_anchored_urbs
+ * the anchor can be used normally after it returns
+ */
+void usb_unpoison_anchored_urbs(struct usb_anchor *anchor)
+{
+	unsigned long flags;
+	struct urb *lazarus;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	list_for_each_entry(lazarus, &anchor->urb_list, anchor_list) {
+		usb_unpoison_urb(lazarus);
+	}
+	anchor->poisoned = 0;
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
+/**
+ * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse
+ * @anchor: anchor the requests are bound to
+ *
+ * this allows all outstanding URBs to be unlinked starting
+ * from the back of the queue. This function is asynchronous.
+ * The unlinking is just triggered. It may happen after this
+ * function has returned.
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
+ */
+void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+
+	while ((victim = usb_get_from_anchor(anchor)) != NULL) {
+		usb_unlink_urb(victim);
+		usb_put_urb(victim);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
+
+/**
+ * usb_anchor_suspend_wakeups
+ * @anchor: the anchor you want to suspend wakeups on
+ *
+ * Call this to stop the last urb being unanchored from waking up any
+ * usb_wait_anchor_empty_timeout waiters. This is used in the hcd urb give-
+ * back path to delay waking up until after the completion handler has run.
+ */
+void usb_anchor_suspend_wakeups(struct usb_anchor *anchor)
+{
+	if (anchor)
+		atomic_inc(&anchor->suspend_wakeups);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_suspend_wakeups);
+
+/**
+ * usb_anchor_resume_wakeups
+ * @anchor: the anchor you want to resume wakeups on
+ *
+ * Allow usb_wait_anchor_empty_timeout waiters to be woken up again, and
+ * wake up any current waiters if the anchor is empty.
+ */
+void usb_anchor_resume_wakeups(struct usb_anchor *anchor)
+{
+	if (!anchor)
+		return;
+
+	atomic_dec(&anchor->suspend_wakeups);
+	if (usb_anchor_check_wakeup(anchor))
+		wake_up(&anchor->wait);
+}
+EXPORT_SYMBOL_GPL(usb_anchor_resume_wakeups);
+
+/**
+ * usb_wait_anchor_empty_timeout - wait for an anchor to be unused
+ * @anchor: the anchor you want to become unused
+ * @timeout: how long you are willing to wait in milliseconds
+ *
+ * Call this is you want to be sure all an anchor's
+ * URBs have finished
+ *
+ * Return: Non-zero if the anchor became unused. Zero on timeout.
+ */
+int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
+				  unsigned int timeout)
+{
+	return wait_event_timeout(anchor->wait,
+				  usb_anchor_check_wakeup(anchor),
+				  msecs_to_jiffies(timeout));
+}
+EXPORT_SYMBOL_GPL(usb_wait_anchor_empty_timeout);
+
+/**
+ * usb_get_from_anchor - get an anchor's oldest urb
+ * @anchor: the anchor whose urb you want
+ *
+ * This will take the oldest urb from an anchor,
+ * unanchor and return it
+ *
+ * Return: The oldest urb from @anchor, or %NULL if @anchor has no
+ * urbs associated with it.
+ */
+struct urb *usb_get_from_anchor(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	unsigned long flags;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	if (!list_empty(&anchor->urb_list)) {
+		victim = list_entry(anchor->urb_list.next, struct urb,
+				    anchor_list);
+		usb_get_urb(victim);
+		__usb_unanchor_urb(victim, anchor);
+	} else {
+		victim = NULL;
+	}
+	spin_unlock_irqrestore(&anchor->lock, flags);
+
+	return victim;
+}
+
+EXPORT_SYMBOL_GPL(usb_get_from_anchor);
+
+/**
+ * usb_scuttle_anchored_urbs - unanchor all an anchor's urbs
+ * @anchor: the anchor whose urbs you want to unanchor
+ *
+ * use this to get rid of all an anchor's urbs
+ */
+void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
+{
+	struct urb *victim;
+	unsigned long flags;
+
+	spin_lock_irqsave(&anchor->lock, flags);
+	while (!list_empty(&anchor->urb_list)) {
+		victim = list_entry(anchor->urb_list.prev, struct urb,
+				    anchor_list);
+		__usb_unanchor_urb(victim, anchor);
+	}
+	spin_unlock_irqrestore(&anchor->lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
+
+/**
+ * usb_anchor_empty - is an anchor empty
+ * @anchor: the anchor you want to query
+ *
+ * Return: 1 if the anchor has no urbs associated with it.
+ */
+int usb_anchor_empty(struct usb_anchor *anchor)
+{
+	return list_empty(&anchor->urb_list);
+}
+
+EXPORT_SYMBOL_GPL(usb_anchor_empty);
+
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
new file mode 100644
index 000000000..2776cfe64
--- /dev/null
+++ b/drivers/usb/core/usb-acpi.c
@@ -0,0 +1,228 @@
+/*
+ * USB-ACPI glue code
+ *
+ * Copyright 2012 Red Hat <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/usb/hcd.h>
+
+#include "hub.h"
+
+/**
+ * usb_acpi_power_manageable - check whether usb port has
+ * acpi power resource.
+ * @hdev: USB device belonging to the usb hub
+ * @index: port index based zero
+ *
+ * Return true if the port has acpi power resource and false if no.
+ */
+bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
+{
+	acpi_handle port_handle;
+	int port1 = index + 1;
+
+	port_handle = usb_get_hub_port_acpi_handle(hdev,
+		port1);
+	if (port_handle)
+		return acpi_bus_power_manageable(port_handle);
+	else
+		return false;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_power_manageable);
+
+/**
+ * usb_acpi_set_power_state - control usb port's power via acpi power
+ * resource
+ * @hdev: USB device belonging to the usb hub
+ * @index: port index based zero
+ * @enable: power state expected to be set
+ *
+ * Notice to use usb_acpi_power_manageable() to check whether the usb port
+ * has acpi power resource before invoking this function.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
+	struct usb_port *port_dev;
+	acpi_handle port_handle;
+	unsigned char state;
+	int port1 = index + 1;
+	int error = -EINVAL;
+
+	if (!hub)
+		return -ENODEV;
+	port_dev = hub->ports[port1 - 1];
+
+	port_handle = (acpi_handle) usb_get_hub_port_acpi_handle(hdev, port1);
+	if (!port_handle)
+		return error;
+
+	if (enable)
+		state = ACPI_STATE_D0;
+	else
+		state = ACPI_STATE_D3_COLD;
+
+	error = acpi_bus_set_power(port_handle, state);
+	if (!error)
+		dev_dbg(&port_dev->dev, "acpi: power was set to %d\n", enable);
+	else
+		dev_dbg(&port_dev->dev, "acpi: power failed to be set\n");
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_set_power_state);
+
+static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
+		struct acpi_pld_info *pld)
+{
+	enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *upc;
+	acpi_status status;
+
+	/*
+	 * According to ACPI Spec 9.13. PLD indicates whether usb port is
+	 * user visible and _UPC indicates whether it is connectable. If
+	 * the port was visible and connectable, it could be freely connected
+	 * and disconnected with USB devices. If no visible and connectable,
+	 * a usb device is directly hard-wired to the port. If no visible and
+	 * no connectable, the port would be not used.
+	 */
+	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
+	upc = buffer.pointer;
+	if (!upc || (upc->type != ACPI_TYPE_PACKAGE)
+		|| upc->package.count != 4) {
+		goto out;
+	}
+
+	if (upc->package.elements[0].integer.value)
+		if (pld->user_visible)
+			connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG;
+		else
+			connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED;
+	else if (!pld->user_visible)
+		connect_type = USB_PORT_NOT_USED;
+out:
+	kfree(upc);
+	return connect_type;
+}
+
+
+/*
+ * Private to usb-acpi, all the core needs to know is that
+ * port_dev->location is non-zero when it has been set by the firmware.
+ */
+#define USB_ACPI_LOCATION_VALID (1 << 31)
+
+static struct acpi_device *usb_acpi_find_companion(struct device *dev)
+{
+	struct usb_device *udev;
+	struct acpi_device *adev;
+	acpi_handle *parent_handle;
+
+	/*
+	 * In the ACPI DSDT table, only usb root hub and usb ports are
+	 * acpi device nodes. The hierarchy like following.
+	 * Device (EHC1)
+	 *	Device (HUBN)
+	 *		Device (PR01)
+	 *			Device (PR11)
+	 *			Device (PR12)
+	 *			Device (PR13)
+	 *			...
+	 * So all binding process is divided into two parts. binding
+	 * root hub and usb ports.
+	 */
+	if (is_usb_device(dev)) {
+		udev = to_usb_device(dev);
+		if (udev->parent)
+			return NULL;
+
+		/* root hub is only child (_ADR=0) under its parent, the HC */
+		adev = ACPI_COMPANION(dev->parent);
+		return acpi_find_child_device(adev, 0, false);
+	} else if (is_usb_port(dev)) {
+		struct usb_port *port_dev = to_usb_port(dev);
+		int port1 = port_dev->portnum;
+		struct acpi_pld_info *pld;
+		acpi_handle *handle;
+		acpi_status status;
+
+		/* Get the struct usb_device point of port's hub */
+		udev = to_usb_device(dev->parent->parent);
+
+		/*
+		 * The root hub ports' parent is the root hub. The non-root-hub
+		 * ports' parent is the parent hub port which the hub is
+		 * connected to.
+		 */
+		if (!udev->parent) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+			int raw;
+
+			raw = usb_hcd_find_raw_port_number(hcd, port1);
+			adev = acpi_find_child_device(ACPI_COMPANION(&udev->dev),
+					raw, false);
+			if (!adev)
+				return NULL;
+		} else {
+			parent_handle =
+				usb_get_hub_port_acpi_handle(udev->parent,
+				udev->portnum);
+			if (!parent_handle)
+				return NULL;
+
+			acpi_bus_get_device(parent_handle, &adev);
+			adev = acpi_find_child_device(adev, port1, false);
+			if (!adev)
+				return NULL;
+		}
+		handle = adev->handle;
+		status = acpi_get_physical_device_location(handle, &pld);
+		if (ACPI_FAILURE(status) || !pld)
+			return adev;
+
+		port_dev->location = USB_ACPI_LOCATION_VALID
+			| pld->group_token << 8 | pld->group_position;
+		port_dev->connect_type = usb_acpi_get_connect_type(handle, pld);
+		ACPI_FREE(pld);
+
+		return adev;
+	}
+
+	return NULL;
+}
+
+static bool usb_acpi_bus_match(struct device *dev)
+{
+	return is_usb_device(dev) || is_usb_port(dev);
+}
+
+static struct acpi_bus_type usb_acpi_bus = {
+	.name = "USB",
+	.match = usb_acpi_bus_match,
+	.find_companion = usb_acpi_find_companion,
+};
+
+int usb_acpi_register(void)
+{
+	return register_acpi_bus_type(&usb_acpi_bus);
+}
+
+void usb_acpi_unregister(void)
+{
+	unregister_acpi_bus_type(&usb_acpi_bus);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
new file mode 100644
index 000000000..8d5b2f411
--- /dev/null
+++ b/drivers/usb/core/usb.c
@@ -0,0 +1,1121 @@
+/*
+ * drivers/usb/core/usb.c
+ *
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999 (new USB architecture)
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2004
+ * (C) Copyright Yggdrasil Computing, Inc. 2000
+ *     (usb_device_id matching changes by Adam J. Richter)
+ * (C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ * NOTE! This is not actually a driver at all, rather this is
+ * just a collection of helper routines that implement the
+ * generic USB things that the real drivers can use..
+ *
+ * Think of this as a "USB library" rather than anything else.
+ * It should be considered a slave, with no callbacks. Callbacks
+ * are evil.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>  /* for in_interrupt() */
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+
+#include <asm/io.h>
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+
+#include "usb.h"
+
+
+const char *usbcore_name = "usbcore";
+
+static bool nousb;	/* Disable USB when built into kernel image */
+
+/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
+#ifdef MODULE
+module_param(nousb, bool, 0444);
+#else
+core_param(nousb, nousb, bool, 0444);
+#endif
+
+/*
+ * for external read access to <nousb>
+ */
+int usb_disabled(void)
+{
+	return nousb;
+}
+EXPORT_SYMBOL_GPL(usb_disabled);
+
+#ifdef	CONFIG_PM
+static int usb_autosuspend_delay = 2;		/* Default delay value,
+						 * in seconds */
+module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
+MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
+
+#else
+#define usb_autosuspend_delay		0
+#endif
+
+
+/**
+ * usb_find_alt_setting() - Given a configuration, find the alternate setting
+ * for the given interface.
+ * @config: the configuration to search (not necessarily the current config).
+ * @iface_num: interface number to search in
+ * @alt_num: alternate interface setting number to search for.
+ *
+ * Search the configuration's interface cache for the given alt setting.
+ *
+ * Return: The alternate setting, if found. %NULL otherwise.
+ */
+struct usb_host_interface *usb_find_alt_setting(
+		struct usb_host_config *config,
+		unsigned int iface_num,
+		unsigned int alt_num)
+{
+	struct usb_interface_cache *intf_cache = NULL;
+	int i;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber
+				== iface_num) {
+			intf_cache = config->intf_cache[i];
+			break;
+		}
+	}
+	if (!intf_cache)
+		return NULL;
+	for (i = 0; i < intf_cache->num_altsetting; i++)
+		if (intf_cache->altsetting[i].desc.bAlternateSetting == alt_num)
+			return &intf_cache->altsetting[i];
+
+	printk(KERN_DEBUG "Did not find alt setting %u for intf %u, "
+			"config %u\n", alt_num, iface_num,
+			config->desc.bConfigurationValue);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_find_alt_setting);
+
+/**
+ * usb_ifnum_to_if - get the interface object with a given interface number
+ * @dev: the device whose current configuration is considered
+ * @ifnum: the desired interface
+ *
+ * This walks the device descriptor for the currently active configuration
+ * to find the interface object with the particular interface number.
+ *
+ * Note that configuration descriptors are not required to assign interface
+ * numbers sequentially, so that it would be incorrect to assume that
+ * the first interface in that descriptor corresponds to interface zero.
+ * This routine helps device drivers avoid such mistakes.
+ * However, you should make sure that you do the right thing with any
+ * alternate settings available for this interfaces.
+ *
+ * Don't call this function unless you are bound to one of the interfaces
+ * on this device or you have locked the device!
+ *
+ * Return: A pointer to the interface that has @ifnum as interface number,
+ * if found. %NULL otherwise.
+ */
+struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
+				      unsigned ifnum)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int i;
+
+	if (!config)
+		return NULL;
+	for (i = 0; i < config->desc.bNumInterfaces; i++)
+		if (config->interface[i]->altsetting[0]
+				.desc.bInterfaceNumber == ifnum)
+			return config->interface[i];
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
+
+/**
+ * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
+ * @intf: the interface containing the altsetting in question
+ * @altnum: the desired alternate setting number
+ *
+ * This searches the altsetting array of the specified interface for
+ * an entry with the correct bAlternateSetting value.
+ *
+ * Note that altsettings need not be stored sequentially by number, so
+ * it would be incorrect to assume that the first altsetting entry in
+ * the array corresponds to altsetting zero.  This routine helps device
+ * drivers avoid such mistakes.
+ *
+ * Don't call this function unless you are bound to the intf interface
+ * or you have locked the device!
+ *
+ * Return: A pointer to the entry of the altsetting array of @intf that
+ * has @altnum as the alternate setting number. %NULL if not found.
+ */
+struct usb_host_interface *usb_altnum_to_altsetting(
+					const struct usb_interface *intf,
+					unsigned int altnum)
+{
+	int i;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		if (intf->altsetting[i].desc.bAlternateSetting == altnum)
+			return &intf->altsetting[i];
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(usb_altnum_to_altsetting);
+
+struct find_interface_arg {
+	int minor;
+	struct device_driver *drv;
+};
+
+static int __find_interface(struct device *dev, void *data)
+{
+	struct find_interface_arg *arg = data;
+	struct usb_interface *intf;
+
+	if (!is_usb_interface(dev))
+		return 0;
+
+	if (dev->driver != arg->drv)
+		return 0;
+	intf = to_usb_interface(dev);
+	return intf->minor == arg->minor;
+}
+
+/**
+ * usb_find_interface - find usb_interface pointer for driver and device
+ * @drv: the driver whose current configuration is considered
+ * @minor: the minor number of the desired device
+ *
+ * This walks the bus device list and returns a pointer to the interface
+ * with the matching minor and driver.  Note, this only works for devices
+ * that share the USB major number.
+ *
+ * Return: A pointer to the interface with the matching major and @minor.
+ */
+struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
+{
+	struct find_interface_arg argb;
+	struct device *dev;
+
+	argb.minor = minor;
+	argb.drv = &drv->drvwrap.driver;
+
+	dev = bus_find_device(&usb_bus_type, NULL, &argb, __find_interface);
+
+	/* Drop reference count from bus_find_device */
+	put_device(dev);
+
+	return dev ? to_usb_interface(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(usb_find_interface);
+
+struct each_dev_arg {
+	void *data;
+	int (*fn)(struct usb_device *, void *);
+};
+
+static int __each_dev(struct device *dev, void *data)
+{
+	struct each_dev_arg *arg = (struct each_dev_arg *)data;
+
+	/* There are struct usb_interface on the same bus, filter them out */
+	if (!is_usb_device(dev))
+		return 0;
+
+	return arg->fn(container_of(dev, struct usb_device, dev), arg->data);
+}
+
+/**
+ * usb_for_each_dev - iterate over all USB devices in the system
+ * @data: data pointer that will be handed to the callback function
+ * @fn: callback function to be called for each USB device
+ *
+ * Iterate over all USB devices and call @fn for each, passing it @data. If it
+ * returns anything other than 0, we break the iteration prematurely and return
+ * that value.
+ */
+int usb_for_each_dev(void *data, int (*fn)(struct usb_device *, void *))
+{
+	struct each_dev_arg arg = {data, fn};
+
+	return bus_for_each_dev(&usb_bus_type, NULL, &arg, __each_dev);
+}
+EXPORT_SYMBOL_GPL(usb_for_each_dev);
+
+/**
+ * usb_release_dev - free a usb device structure when all users of it are finished.
+ * @dev: device that's been disconnected
+ *
+ * Will be called only by the device core when all users of this usb device are
+ * done.
+ */
+static void usb_release_dev(struct device *dev)
+{
+	struct usb_device *udev;
+	struct usb_hcd *hcd;
+
+	udev = to_usb_device(dev);
+	hcd = bus_to_hcd(udev->bus);
+
+	usb_destroy_configuration(udev);
+	usb_release_bos_descriptor(udev);
+	usb_put_hcd(hcd);
+	kfree(udev->product);
+	kfree(udev->manufacturer);
+	kfree(udev->serial);
+	kfree(udev);
+}
+
+static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_device *usb_dev;
+
+	usb_dev = to_usb_device(dev);
+
+	if (add_uevent_var(env, "BUSNUM=%03d", usb_dev->bus->busnum))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "DEVNUM=%03d", usb_dev->devnum))
+		return -ENOMEM;
+
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce.  And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+	return 0;		/* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+	/* Currently used only for rebinding interfaces */
+	usb_resume_complete(dev);
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+	return usb_resume(dev, PMSG_RESUME);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+	return usb_resume(dev, PMSG_THAW);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+	return usb_resume(dev, PMSG_RESTORE);
+}
+
+static const struct dev_pm_ops usb_device_pm_ops = {
+	.prepare =	usb_dev_prepare,
+	.complete =	usb_dev_complete,
+	.suspend =	usb_dev_suspend,
+	.resume =	usb_dev_resume,
+	.freeze =	usb_dev_freeze,
+	.thaw =		usb_dev_thaw,
+	.poweroff =	usb_dev_poweroff,
+	.restore =	usb_dev_restore,
+	.runtime_suspend =	usb_runtime_suspend,
+	.runtime_resume =	usb_runtime_resume,
+	.runtime_idle =		usb_runtime_idle,
+};
+
+#endif	/* CONFIG_PM */
+
+
+static char *usb_devnode(struct device *dev,
+			 umode_t *mode, kuid_t *uid, kgid_t *gid)
+{
+	struct usb_device *usb_dev;
+
+	usb_dev = to_usb_device(dev);
+	return kasprintf(GFP_KERNEL, "bus/usb/%03d/%03d",
+			 usb_dev->bus->busnum, usb_dev->devnum);
+}
+
+struct device_type usb_device_type = {
+	.name =		"usb_device",
+	.release =	usb_release_dev,
+	.uevent =	usb_dev_uevent,
+	.devnode = 	usb_devnode,
+#ifdef CONFIG_PM
+	.pm =		&usb_device_pm_ops,
+#endif
+};
+
+
+/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
+static unsigned usb_bus_is_wusb(struct usb_bus *bus)
+{
+	struct usb_hcd *hcd = container_of(bus, struct usb_hcd, self);
+	return hcd->wireless;
+}
+
+
+/**
+ * usb_alloc_dev - usb device constructor (usbcore-internal)
+ * @parent: hub to which device is connected; null to allocate a root hub
+ * @bus: bus used to access the device
+ * @port1: one-based index of port; ignored for root hubs
+ * Context: !in_interrupt()
+ *
+ * Only hub drivers (including virtual root hub drivers for host
+ * controllers) should ever call this.
+ *
+ * This call may not be used in a non-sleeping context.
+ *
+ * Return: On success, a pointer to the allocated usb device. %NULL on
+ * failure.
+ */
+struct usb_device *usb_alloc_dev(struct usb_device *parent,
+				 struct usb_bus *bus, unsigned port1)
+{
+	struct usb_device *dev;
+	struct usb_hcd *usb_hcd = bus_to_hcd(bus);
+	unsigned root_hub = 0;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	if (!usb_get_hcd(usb_hcd)) {
+		kfree(dev);
+		return NULL;
+	}
+	/* Root hubs aren't true devices, so don't allocate HCD resources */
+	if (usb_hcd->driver->alloc_dev && parent &&
+		!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
+		usb_put_hcd(bus_to_hcd(bus));
+		kfree(dev);
+		return NULL;
+	}
+
+	device_initialize(&dev->dev);
+	dev->dev.bus = &usb_bus_type;
+	dev->dev.type = &usb_device_type;
+	dev->dev.groups = usb_device_groups;
+	dev->dev.dma_mask = bus->controller->dma_mask;
+	set_dev_node(&dev->dev, dev_to_node(bus->controller));
+	dev->state = USB_STATE_ATTACHED;
+	dev->lpm_disable_count = 1;
+	atomic_set(&dev->urbnum, 0);
+
+	INIT_LIST_HEAD(&dev->ep0.urb_list);
+	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
+	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
+	/* ep0 maxpacket comes later, from device descriptor */
+	usb_enable_endpoint(dev, &dev->ep0, false);
+	dev->can_submit = 1;
+
+	/* Save readable and stable topology id, distinguishing devices
+	 * by location for diagnostics, tools, driver model, etc.  The
+	 * string is a path along hub ports, from the root.  Each device's
+	 * dev->devpath will be stable until USB is re-cabled, and hubs
+	 * are often labeled with these port numbers.  The name isn't
+	 * as stable:  bus->busnum changes easily from modprobe order,
+	 * cardbus or pci hotplugging, and so on.
+	 */
+	if (unlikely(!parent)) {
+		dev->devpath[0] = '0';
+		dev->route = 0;
+
+		dev->dev.parent = bus->controller;
+		dev_set_name(&dev->dev, "usb%d", bus->busnum);
+		root_hub = 1;
+	} else {
+		/* match any labeling on the hubs; it's one-based */
+		if (parent->devpath[0] == '0') {
+			snprintf(dev->devpath, sizeof dev->devpath,
+				"%d", port1);
+			/* Root ports are not counted in route string */
+			dev->route = 0;
+		} else {
+			snprintf(dev->devpath, sizeof dev->devpath,
+				"%s.%d", parent->devpath, port1);
+			/* Route string assumes hubs have less than 16 ports */
+			if (port1 < 15)
+				dev->route = parent->route +
+					(port1 << ((parent->level - 1)*4));
+			else
+				dev->route = parent->route +
+					(15 << ((parent->level - 1)*4));
+		}
+
+		dev->dev.parent = &parent->dev;
+		dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
+
+		/* hub driver sets up TT records */
+	}
+
+	dev->portnum = port1;
+	dev->bus = bus;
+	dev->parent = parent;
+	INIT_LIST_HEAD(&dev->filelist);
+
+#ifdef	CONFIG_PM
+	pm_runtime_set_autosuspend_delay(&dev->dev,
+			usb_autosuspend_delay * 1000);
+	dev->connect_time = jiffies;
+	dev->active_duration = -jiffies;
+#endif
+	if (root_hub)	/* Root hub always ok [and always wired] */
+		dev->authorized = 1;
+	else {
+		dev->authorized = usb_hcd->authorized_default;
+		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
+	}
+	return dev;
+}
+EXPORT_SYMBOL_GPL(usb_alloc_dev);
+
+/**
+ * usb_get_dev - increments the reference count of the usb device structure
+ * @dev: the device being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for USB interfaces should normally record such references in
+ * their probe() methods, when they bind to an interface, and release
+ * them by calling usb_put_dev(), in their disconnect() methods.
+ *
+ * Return: A pointer to the device with the incremented reference counter.
+ */
+struct usb_device *usb_get_dev(struct usb_device *dev)
+{
+	if (dev)
+		get_device(&dev->dev);
+	return dev;
+}
+EXPORT_SYMBOL_GPL(usb_get_dev);
+
+/**
+ * usb_put_dev - release a use of the usb device structure
+ * @dev: device that's been disconnected
+ *
+ * Must be called when a user of a device is finished with it.  When the last
+ * user of the device calls this function, the memory of the device is freed.
+ */
+void usb_put_dev(struct usb_device *dev)
+{
+	if (dev)
+		put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(usb_put_dev);
+
+/**
+ * usb_get_intf - increments the reference count of the usb interface structure
+ * @intf: the interface being referenced
+ *
+ * Each live reference to a interface must be refcounted.
+ *
+ * Drivers for USB interfaces should normally record such references in
+ * their probe() methods, when they bind to an interface, and release
+ * them by calling usb_put_intf(), in their disconnect() methods.
+ *
+ * Return: A pointer to the interface with the incremented reference counter.
+ */
+struct usb_interface *usb_get_intf(struct usb_interface *intf)
+{
+	if (intf)
+		get_device(&intf->dev);
+	return intf;
+}
+EXPORT_SYMBOL_GPL(usb_get_intf);
+
+/**
+ * usb_put_intf - release a use of the usb interface structure
+ * @intf: interface that's been decremented
+ *
+ * Must be called when a user of an interface is finished with it.  When the
+ * last user of the interface calls this function, the memory of the interface
+ * is freed.
+ */
+void usb_put_intf(struct usb_interface *intf)
+{
+	if (intf)
+		put_device(&intf->dev);
+}
+EXPORT_SYMBOL_GPL(usb_put_intf);
+
+/*			USB device locking
+ *
+ * USB devices and interfaces are locked using the semaphore in their
+ * embedded struct device.  The hub driver guarantees that whenever a
+ * device is connected or disconnected, drivers are called with the
+ * USB device locked as well as their particular interface.
+ *
+ * Complications arise when several devices are to be locked at the same
+ * time.  Only hub-aware drivers that are part of usbcore ever have to
+ * do this; nobody else needs to worry about it.  The rule for locking
+ * is simple:
+ *
+ *	When locking both a device and its parent, always lock the
+ *	the parent first.
+ */
+
+/**
+ * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
+ * @udev: device that's being locked
+ * @iface: interface bound to the driver making the request (optional)
+ *
+ * Attempts to acquire the device lock, but fails if the device is
+ * NOTATTACHED or SUSPENDED, or if iface is specified and the interface
+ * is neither BINDING nor BOUND.  Rather than sleeping to wait for the
+ * lock, the routine polls repeatedly.  This is to prevent deadlock with
+ * disconnect; in some drivers (such as usb-storage) the disconnect()
+ * or suspend() method will block waiting for a device reset to complete.
+ *
+ * Return: A negative error code for failure, otherwise 0.
+ */
+int usb_lock_device_for_reset(struct usb_device *udev,
+			      const struct usb_interface *iface)
+{
+	unsigned long jiffies_expire = jiffies + HZ;
+
+	if (udev->state == USB_STATE_NOTATTACHED)
+		return -ENODEV;
+	if (udev->state == USB_STATE_SUSPENDED)
+		return -EHOSTUNREACH;
+	if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+			iface->condition == USB_INTERFACE_UNBOUND))
+		return -EINTR;
+
+	while (!usb_trylock_device(udev)) {
+
+		/* If we can't acquire the lock after waiting one second,
+		 * we're probably deadlocked */
+		if (time_after(jiffies, jiffies_expire))
+			return -EBUSY;
+
+		msleep(15);
+		if (udev->state == USB_STATE_NOTATTACHED)
+			return -ENODEV;
+		if (udev->state == USB_STATE_SUSPENDED)
+			return -EHOSTUNREACH;
+		if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+				iface->condition == USB_INTERFACE_UNBOUND))
+			return -EINTR;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
+
+/**
+ * usb_get_current_frame_number - return current bus frame number
+ * @dev: the device whose bus is being queried
+ *
+ * Return: The current frame number for the USB host controller used
+ * with the given USB device. This can be used when scheduling
+ * isochronous requests.
+ *
+ * Note: Different kinds of host controller have different "scheduling
+ * horizons". While one type might support scheduling only 32 frames
+ * into the future, others could support scheduling up to 1024 frames
+ * into the future.
+ *
+ */
+int usb_get_current_frame_number(struct usb_device *dev)
+{
+	return usb_hcd_get_frame_number(dev);
+}
+EXPORT_SYMBOL_GPL(usb_get_current_frame_number);
+
+/*-------------------------------------------------------------------*/
+/*
+ * __usb_get_extra_descriptor() finds a descriptor of specific type in the
+ * extra field of the interface and endpoint descriptor structs.
+ */
+
+int __usb_get_extra_descriptor(char *buffer, unsigned size,
+			       unsigned char type, void **ptr)
+{
+	struct usb_descriptor_header *header;
+
+	while (size >= sizeof(struct usb_descriptor_header)) {
+		header = (struct usb_descriptor_header *)buffer;
+
+		if (header->bLength < 2) {
+			printk(KERN_ERR
+				"%s: bogus descriptor, type %d length %d\n",
+				usbcore_name,
+				header->bDescriptorType,
+				header->bLength);
+			return -1;
+		}
+
+		if (header->bDescriptorType == type) {
+			*ptr = header;
+			return 0;
+		}
+
+		buffer += header->bLength;
+		size -= header->bLength;
+	}
+	return -1;
+}
+EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
+
+/**
+ * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+ * @dev: device the buffer will be used with
+ * @size: requested buffer size
+ * @mem_flags: affect whether allocation may block
+ * @dma: used to return DMA address of buffer
+ *
+ * Return: Either null (indicating no buffer could be allocated), or the
+ * cpu-space pointer to a buffer that may be used to perform DMA to the
+ * specified device.  Such cpu-space buffers are returned along with the DMA
+ * address (through the pointer provided).
+ *
+ * Note:
+ * These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags
+ * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU
+ * hardware during URB completion/resubmit.  The implementation varies between
+ * platforms, depending on details of how DMA will work to this device.
+ * Using these buffers also eliminates cacheline sharing problems on
+ * architectures where CPU caches are not DMA-coherent.  On systems without
+ * bus-snooping caches, these buffers are uncached.
+ *
+ * When the buffer is no longer used, free it with usb_free_coherent().
+ */
+void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
+			 dma_addr_t *dma)
+{
+	if (!dev || !dev->bus)
+		return NULL;
+	return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
+}
+EXPORT_SYMBOL_GPL(usb_alloc_coherent);
+
+/**
+ * usb_free_coherent - free memory allocated with usb_alloc_coherent()
+ * @dev: device the buffer was used with
+ * @size: requested buffer size
+ * @addr: CPU address of buffer
+ * @dma: DMA address of buffer
+ *
+ * This reclaims an I/O buffer, letting it be reused.  The memory must have
+ * been allocated using usb_alloc_coherent(), and the parameters must match
+ * those provided in that allocation request.
+ */
+void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
+		       dma_addr_t dma)
+{
+	if (!dev || !dev->bus)
+		return;
+	if (!addr)
+		return;
+	hcd_buffer_free(dev->bus, size, addr, dma);
+}
+EXPORT_SYMBOL_GPL(usb_free_coherent);
+
+/**
+ * usb_buffer_map - create DMA mapping(s) for an urb
+ * @urb: urb whose transfer_buffer/setup_packet will be mapped
+ *
+ * URB_NO_TRANSFER_DMA_MAP is added to urb->transfer_flags if the operation
+ * succeeds. If the device is connected to this system through a non-DMA
+ * controller, this operation always succeeds.
+ *
+ * This call would normally be used for an urb which is reused, perhaps
+ * as the target of a large periodic transfer, with usb_buffer_dmasync()
+ * calls to synchronize memory and dma state.
+ *
+ * Reverse the effect of this call with usb_buffer_unmap().
+ *
+ * Return: Either %NULL (indicating no buffer could be mapped), or @urb.
+ *
+ */
+#if 0
+struct urb *usb_buffer_map(struct urb *urb)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!urb
+			|| !urb->dev
+			|| !(bus = urb->dev->bus)
+			|| !(controller = bus->controller))
+		return NULL;
+
+	if (controller->dma_mask) {
+		urb->transfer_dma = dma_map_single(controller,
+			urb->transfer_buffer, urb->transfer_buffer_length,
+			usb_pipein(urb->pipe)
+				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	/* FIXME generic api broken like pci, can't report errors */
+	/* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
+	} else
+		urb->transfer_dma = ~0;
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	return urb;
+}
+EXPORT_SYMBOL_GPL(usb_buffer_map);
+#endif  /*  0  */
+
+/* XXX DISABLED, no users currently.  If you wish to re-enable this
+ * XXX please determine whether the sync is to transfer ownership of
+ * XXX the buffer from device to cpu or vice verse, and thusly use the
+ * XXX appropriate _for_{cpu,device}() method.  -DaveM
+ */
+#if 0
+
+/**
+ * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
+ * @urb: urb whose transfer_buffer/setup_packet will be synchronized
+ */
+void usb_buffer_dmasync(struct urb *urb)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!urb
+			|| !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+			|| !urb->dev
+			|| !(bus = urb->dev->bus)
+			|| !(controller = bus->controller))
+		return;
+
+	if (controller->dma_mask) {
+		dma_sync_single_for_cpu(controller,
+			urb->transfer_dma, urb->transfer_buffer_length,
+			usb_pipein(urb->pipe)
+				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		if (usb_pipecontrol(urb->pipe))
+			dma_sync_single_for_cpu(controller,
+					urb->setup_dma,
+					sizeof(struct usb_ctrlrequest),
+					DMA_TO_DEVICE);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_buffer_dmasync);
+#endif
+
+/**
+ * usb_buffer_unmap - free DMA mapping(s) for an urb
+ * @urb: urb whose transfer_buffer will be unmapped
+ *
+ * Reverses the effect of usb_buffer_map().
+ */
+#if 0
+void usb_buffer_unmap(struct urb *urb)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!urb
+			|| !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+			|| !urb->dev
+			|| !(bus = urb->dev->bus)
+			|| !(controller = bus->controller))
+		return;
+
+	if (controller->dma_mask) {
+		dma_unmap_single(controller,
+			urb->transfer_dma, urb->transfer_buffer_length,
+			usb_pipein(urb->pipe)
+				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+	}
+	urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
+}
+EXPORT_SYMBOL_GPL(usb_buffer_unmap);
+#endif  /*  0  */
+
+#if 0
+/**
+ * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
+ * @dev: device to which the scatterlist will be mapped
+ * @is_in: mapping transfer direction
+ * @sg: the scatterlist to map
+ * @nents: the number of entries in the scatterlist
+ *
+ * Return: Either < 0 (indicating no buffers could be mapped), or the
+ * number of DMA mapping array entries in the scatterlist.
+ *
+ * Note:
+ * The caller is responsible for placing the resulting DMA addresses from
+ * the scatterlist into URB transfer buffer pointers, and for setting the
+ * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
+ *
+ * Top I/O rates come from queuing URBs, instead of waiting for each one
+ * to complete before starting the next I/O.   This is particularly easy
+ * to do with scatterlists.  Just allocate and submit one URB for each DMA
+ * mapping entry returned, stopping on the first error or when all succeed.
+ * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
+ *
+ * This call would normally be used when translating scatterlist requests,
+ * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
+ * may be able to coalesce mappings for improved I/O efficiency.
+ *
+ * Reverse the effect of this call with usb_buffer_unmap_sg().
+ */
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
+		      struct scatterlist *sg, int nents)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!dev
+			|| !(bus = dev->bus)
+			|| !(controller = bus->controller)
+			|| !controller->dma_mask)
+		return -EINVAL;
+
+	/* FIXME generic api broken like pci, can't report errors */
+	return dma_map_sg(controller, sg, nents,
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
+#endif
+
+/* XXX DISABLED, no users currently.  If you wish to re-enable this
+ * XXX please determine whether the sync is to transfer ownership of
+ * XXX the buffer from device to cpu or vice verse, and thusly use the
+ * XXX appropriate _for_{cpu,device}() method.  -DaveM
+ */
+#if 0
+
+/**
+ * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
+ * @dev: device to which the scatterlist will be mapped
+ * @is_in: mapping transfer direction
+ * @sg: the scatterlist to synchronize
+ * @n_hw_ents: the positive return value from usb_buffer_map_sg
+ *
+ * Use this when you are re-using a scatterlist's data buffers for
+ * another USB request.
+ */
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
+			   struct scatterlist *sg, int n_hw_ents)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!dev
+			|| !(bus = dev->bus)
+			|| !(controller = bus->controller)
+			|| !controller->dma_mask)
+		return;
+
+	dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
+			    is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
+#endif
+
+#if 0
+/**
+ * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
+ * @dev: device to which the scatterlist will be mapped
+ * @is_in: mapping transfer direction
+ * @sg: the scatterlist to unmap
+ * @n_hw_ents: the positive return value from usb_buffer_map_sg
+ *
+ * Reverses the effect of usb_buffer_map_sg().
+ */
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
+			 struct scatterlist *sg, int n_hw_ents)
+{
+	struct usb_bus		*bus;
+	struct device		*controller;
+
+	if (!dev
+			|| !(bus = dev->bus)
+			|| !(controller = bus->controller)
+			|| !controller->dma_mask)
+		return;
+
+	dma_unmap_sg(controller, sg, n_hw_ents,
+			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
+#endif
+
+/*
+ * Notifications of device and interface registration
+ */
+static int usb_bus_notify(struct notifier_block *nb, unsigned long action,
+		void *data)
+{
+	struct device *dev = data;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->type == &usb_device_type)
+			(void) usb_create_sysfs_dev_files(to_usb_device(dev));
+		else if (dev->type == &usb_if_device_type)
+			usb_create_sysfs_intf_files(to_usb_interface(dev));
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->type == &usb_device_type)
+			usb_remove_sysfs_dev_files(to_usb_device(dev));
+		else if (dev->type == &usb_if_device_type)
+			usb_remove_sysfs_intf_files(to_usb_interface(dev));
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block usb_bus_nb = {
+	.notifier_call = usb_bus_notify,
+};
+
+struct dentry *usb_debug_root;
+EXPORT_SYMBOL_GPL(usb_debug_root);
+
+static struct dentry *usb_debug_devices;
+
+static int usb_debugfs_init(void)
+{
+	usb_debug_root = debugfs_create_dir("usb", NULL);
+	if (!usb_debug_root)
+		return -ENOENT;
+
+	usb_debug_devices = debugfs_create_file("devices", 0444,
+						usb_debug_root, NULL,
+						&usbfs_devices_fops);
+	if (!usb_debug_devices) {
+		debugfs_remove(usb_debug_root);
+		usb_debug_root = NULL;
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static void usb_debugfs_cleanup(void)
+{
+	debugfs_remove(usb_debug_devices);
+	debugfs_remove(usb_debug_root);
+}
+
+/*
+ * Init
+ */
+static int __init usb_init(void)
+{
+	int retval;
+	if (usb_disabled()) {
+		pr_info("%s: USB support disabled\n", usbcore_name);
+		return 0;
+	}
+	usb_init_pool_max();
+
+	retval = usb_debugfs_init();
+	if (retval)
+		goto out;
+
+	usb_acpi_register();
+	retval = bus_register(&usb_bus_type);
+	if (retval)
+		goto bus_register_failed;
+	retval = bus_register_notifier(&usb_bus_type, &usb_bus_nb);
+	if (retval)
+		goto bus_notifier_failed;
+	retval = usb_major_init();
+	if (retval)
+		goto major_init_failed;
+	retval = usb_register(&usbfs_driver);
+	if (retval)
+		goto driver_register_failed;
+	retval = usb_devio_init();
+	if (retval)
+		goto usb_devio_init_failed;
+	retval = usb_hub_init();
+	if (retval)
+		goto hub_init_failed;
+	retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
+	if (!retval)
+		goto out;
+
+	usb_hub_cleanup();
+hub_init_failed:
+	usb_devio_cleanup();
+usb_devio_init_failed:
+	usb_deregister(&usbfs_driver);
+driver_register_failed:
+	usb_major_cleanup();
+major_init_failed:
+	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
+bus_notifier_failed:
+	bus_unregister(&usb_bus_type);
+bus_register_failed:
+	usb_acpi_unregister();
+	usb_debugfs_cleanup();
+out:
+	return retval;
+}
+
+/*
+ * Cleanup
+ */
+static void __exit usb_exit(void)
+{
+	/* This will matter if shutdown/reboot does exitcalls. */
+	if (usb_disabled())
+		return;
+
+	usb_deregister_device_driver(&usb_generic_driver);
+	usb_major_cleanup();
+	usb_deregister(&usbfs_driver);
+	usb_devio_cleanup();
+	usb_hub_cleanup();
+	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
+	bus_unregister(&usb_bus_type);
+	usb_acpi_unregister();
+	usb_debugfs_cleanup();
+}
+
+subsys_initcall(usb_init);
+module_exit(usb_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
new file mode 100644
index 000000000..457255a33
--- /dev/null
+++ b/drivers/usb/core/usb.h
@@ -0,0 +1,187 @@
+#include <linux/pm.h>
+#include <linux/acpi.h>
+
+struct usb_hub_descriptor;
+struct usb_dev_state;
+
+/* Functions local to drivers/usb/core/ */
+
+extern int usb_create_sysfs_dev_files(struct usb_device *dev);
+extern void usb_remove_sysfs_dev_files(struct usb_device *dev);
+extern void usb_create_sysfs_intf_files(struct usb_interface *intf);
+extern void usb_remove_sysfs_intf_files(struct usb_interface *intf);
+extern int usb_create_ep_devs(struct device *parent,
+				struct usb_host_endpoint *endpoint,
+				struct usb_device *udev);
+extern void usb_remove_ep_devs(struct usb_host_endpoint *endpoint);
+
+extern void usb_enable_endpoint(struct usb_device *dev,
+		struct usb_host_endpoint *ep, bool reset_toggle);
+extern void usb_enable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_toggles);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware);
+extern void usb_disable_interface(struct usb_device *dev,
+		struct usb_interface *intf, bool reset_hardware);
+extern void usb_release_interface_cache(struct kref *ref);
+extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
+extern int usb_deauthorize_device(struct usb_device *);
+extern int usb_authorize_device(struct usb_device *);
+extern void usb_detect_quirks(struct usb_device *udev);
+extern void usb_detect_interface_quirks(struct usb_device *udev);
+extern int usb_remove_device(struct usb_device *udev);
+
+extern int usb_get_device_descriptor(struct usb_device *dev,
+		unsigned int size);
+extern int usb_get_bos_descriptor(struct usb_device *dev);
+extern void usb_release_bos_descriptor(struct usb_device *dev);
+extern char *usb_cache_string(struct usb_device *udev, int index);
+extern int usb_set_configuration(struct usb_device *dev, int configuration);
+extern int usb_choose_configuration(struct usb_device *udev);
+
+static inline unsigned usb_get_max_power(struct usb_device *udev,
+		struct usb_host_config *c)
+{
+	/* SuperSpeed power is in 8 mA units; others are in 2 mA units */
+	unsigned mul = (udev->speed == USB_SPEED_SUPER ? 8 : 2);
+
+	return c->desc.bMaxPower * mul;
+}
+
+extern void usb_kick_hub_wq(struct usb_device *dev);
+extern int usb_match_one_id_intf(struct usb_device *dev,
+				 struct usb_host_interface *intf,
+				 const struct usb_device_id *id);
+extern int usb_match_device(struct usb_device *dev,
+			    const struct usb_device_id *id);
+extern void usb_forced_unbind_intf(struct usb_interface *intf);
+extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev);
+
+extern void usb_hub_release_all_ports(struct usb_device *hdev,
+		struct usb_dev_state *owner);
+extern bool usb_device_is_owned(struct usb_device *udev);
+
+extern int  usb_hub_init(void);
+extern void usb_hub_cleanup(void);
+extern int usb_major_init(void);
+extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
+
+#ifdef	CONFIG_PM
+
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev, pm_message_t msg);
+extern int usb_resume_complete(struct device *dev);
+
+extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
+extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
+
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
+extern int usb_remote_wakeup(struct usb_device *dev);
+extern int usb_runtime_suspend(struct device *dev);
+extern int usb_runtime_resume(struct device *dev);
+extern int usb_runtime_idle(struct device *dev);
+extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
+
+#else
+
+static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
+{
+	return 0;
+}
+
+static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
+{
+	return 0;
+}
+
+#define usb_autosuspend_device(udev)		do {} while (0)
+static inline int usb_autoresume_device(struct usb_device *udev)
+{
+	return 0;
+}
+
+static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+#endif
+
+extern struct bus_type usb_bus_type;
+extern struct mutex usb_port_peer_mutex;
+extern struct device_type usb_device_type;
+extern struct device_type usb_if_device_type;
+extern struct device_type usb_ep_device_type;
+extern struct device_type usb_port_device_type;
+extern struct usb_device_driver usb_generic_driver;
+
+static inline int is_usb_device(const struct device *dev)
+{
+	return dev->type == &usb_device_type;
+}
+
+static inline int is_usb_interface(const struct device *dev)
+{
+	return dev->type == &usb_if_device_type;
+}
+
+static inline int is_usb_endpoint(const struct device *dev)
+{
+	return dev->type == &usb_ep_device_type;
+}
+
+static inline int is_usb_port(const struct device *dev)
+{
+	return dev->type == &usb_port_device_type;
+}
+
+/* Do the same for device drivers and interface drivers. */
+
+static inline int is_usb_device_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct usbdrv_wrap, driver)->
+			for_devices;
+}
+
+/* for labeling diagnostics */
+extern const char *usbcore_name;
+
+/* sysfs stuff */
+extern const struct attribute_group *usb_device_groups[];
+extern const struct attribute_group *usb_interface_groups[];
+
+/* usbfs stuff */
+extern struct mutex usbfs_mutex;
+extern struct usb_driver usbfs_driver;
+extern const struct file_operations usbfs_devices_fops;
+extern const struct file_operations usbdev_file_operations;
+extern void usbfs_conn_disc_event(void);
+
+extern int usb_devio_init(void);
+extern void usb_devio_cleanup(void);
+
+/*
+ * Firmware specific cookie identifying a port's location. '0' == no location
+ * data available
+ */
+typedef u32 usb_port_location_t;
+
+/* internal notify stuff */
+extern void usb_notify_add_device(struct usb_device *udev);
+extern void usb_notify_remove_device(struct usb_device *udev);
+extern void usb_notify_add_bus(struct usb_bus *ubus);
+extern void usb_notify_remove_bus(struct usb_bus *ubus);
+extern void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
+		struct usb_hub_descriptor *desc);
+
+#ifdef CONFIG_ACPI
+extern int usb_acpi_register(void);
+extern void usb_acpi_unregister(void);
+extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1);
+#else
+static inline int usb_acpi_register(void) { return 0; };
+static inline void usb_acpi_unregister(void) { };
+#endif