Initial import

1 files changed, 4127 insertions, 0 deletions

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
new file mode 100644
index 000000000..6a3088708
--- /dev/null
+++ b/drivers/usb/dwc2/gadget.c
@@ -0,0 +1,4127 @@
+/**
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/mutex.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
+#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/uaccess.h>
+
+#include "core.h"
+#include "hw.h"
+
+/* conversion functions */
+static inline struct s3c_hsotg_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct s3c_hsotg_req, req);
+}
+
+static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct s3c_hsotg_ep, ep);
+}
+
+static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct dwc2_hsotg, gadget);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) | val, ptr);
+}
+
+static inline void __bic32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) & ~val, ptr);
+}
+
+static inline struct s3c_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg,
+						u32 ep_index, u32 dir_in)
+{
+	if (dir_in)
+		return hsotg->eps_in[ep_index];
+	else
+		return hsotg->eps_out[ep_index];
+}
+
+/* forward declaration of functions */
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg);
+
+/**
+ * using_dma - return the DMA status of the driver.
+ * @hsotg: The driver state.
+ *
+ * Return true if we're using DMA.
+ *
+ * Currently, we have the DMA support code worked into everywhere
+ * that needs it, but the AMBA DMA implementation in the hardware can
+ * only DMA from 32bit aligned addresses. This means that gadgets such
+ * as the CDC Ethernet cannot work as they often pass packets which are
+ * not 32bit aligned.
+ *
+ * Unfortunately the choice to use DMA or not is global to the controller
+ * and seems to be only settable when the controller is being put through
+ * a core reset. This means we either need to fix the gadgets to take
+ * account of DMA alignment, or add bounce buffers (yuerk).
+ *
+ * g_using_dma is set depending on dts flag.
+ */
+static inline bool using_dma(struct dwc2_hsotg *hsotg)
+{
+	return hsotg->g_using_dma;
+}
+
+/**
+ * s3c_hsotg_en_gsint - enable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk | ints;
+
+	if (new_gsintmsk != gsintmsk) {
+		dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
+		writel(new_gsintmsk, hsotg->regs + GINTMSK);
+	}
+}
+
+/**
+ * s3c_hsotg_disable_gsint - disable one or more of the general interrupt
+ * @hsotg: The device state
+ * @ints: A bitmask of the interrupts to enable
+ */
+static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
+{
+	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
+	u32 new_gsintmsk;
+
+	new_gsintmsk = gsintmsk & ~ints;
+
+	if (new_gsintmsk != gsintmsk)
+		writel(new_gsintmsk, hsotg->regs + GINTMSK);
+}
+
+/**
+ * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq
+ * @hsotg: The device state
+ * @ep: The endpoint index
+ * @dir_in: True if direction is in.
+ * @en: The enable value, true to enable
+ *
+ * Set or clear the mask for an individual endpoint's interrupt
+ * request.
+ */
+static void s3c_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
+				 unsigned int ep, unsigned int dir_in,
+				 unsigned int en)
+{
+	unsigned long flags;
+	u32 bit = 1 << ep;
+	u32 daint;
+
+	if (!dir_in)
+		bit <<= 16;
+
+	local_irq_save(flags);
+	daint = readl(hsotg->regs + DAINTMSK);
+	if (en)
+		daint |= bit;
+	else
+		daint &= ~bit;
+	writel(daint, hsotg->regs + DAINTMSK);
+	local_irq_restore(flags);
+}
+
+/**
+ * s3c_hsotg_init_fifo - initialise non-periodic FIFOs
+ * @hsotg: The device instance.
+ */
+static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
+{
+	unsigned int ep;
+	unsigned int addr;
+	int timeout;
+	u32 val;
+
+	/* Reset fifo map if not correctly cleared during previous session */
+	WARN_ON(hsotg->fifo_map);
+	hsotg->fifo_map = 0;
+
+	/* set RX/NPTX FIFO sizes */
+	writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ);
+	writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) |
+		(hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT),
+		hsotg->regs + GNPTXFSIZ);
+
+	/*
+	 * arange all the rest of the TX FIFOs, as some versions of this
+	 * block have overlapping default addresses. This also ensures
+	 * that if the settings have been changed, then they are set to
+	 * known values.
+	 */
+
+	/* start at the end of the GNPTXFSIZ, rounded up */
+	addr = hsotg->g_rx_fifo_sz + hsotg->g_np_g_tx_fifo_sz;
+
+	/*
+	 * Configure fifos sizes from provided configuration and assign
+	 * them to endpoints dynamically according to maxpacket size value of
+	 * given endpoint.
+	 */
+	for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+		if (!hsotg->g_tx_fifo_sz[ep])
+			continue;
+		val = addr;
+		val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
+			  "insufficient fifo memory");
+		addr += hsotg->g_tx_fifo_sz[ep];
+
+		writel(val, hsotg->regs + DPTXFSIZN(ep));
+	}
+
+	/*
+	 * according to p428 of the design guide, we need to ensure that
+	 * all fifos are flushed before continuing
+	 */
+
+	writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
+	       GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL);
+
+	/* wait until the fifos are both flushed */
+	timeout = 100;
+	while (1) {
+		val = readl(hsotg->regs + GRSTCTL);
+
+		if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0)
+			break;
+
+		if (--timeout == 0) {
+			dev_err(hsotg->dev,
+				"%s: timeout flushing fifos (GRSTCTL=%08x)\n",
+				__func__, val);
+			break;
+		}
+
+		udelay(1);
+	}
+
+	dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
+}
+
+/**
+ * @ep: USB endpoint to allocate request for.
+ * @flags: Allocation flags
+ *
+ * Allocate a new USB request structure appropriate for the specified endpoint
+ */
+static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep,
+						      gfp_t flags)
+{
+	struct s3c_hsotg_req *req;
+
+	req = kzalloc(sizeof(struct s3c_hsotg_req), flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+/**
+ * is_ep_periodic - return true if the endpoint is in periodic mode.
+ * @hs_ep: The endpoint to query.
+ *
+ * Returns true if the endpoint is in periodic mode, meaning it is being
+ * used for an Interrupt or ISO transfer.
+ */
+static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
+{
+	return hs_ep->periodic;
+}
+
+/**
+ * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint for the request
+ * @hs_req: The request being processed.
+ *
+ * This is the reverse of s3c_hsotg_map_dma(), called for the completion
+ * of a request to ensure the buffer is ready for access by the caller.
+ */
+static void s3c_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req)
+{
+	struct usb_request *req = &hs_req->req;
+
+	/* ignore this if we're not moving any data */
+	if (hs_req->req.length == 0)
+		return;
+
+	usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
+}
+
+/**
+ * s3c_hsotg_write_fifo - write packet Data to the TxFIFO
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint we're going to write for.
+ * @hs_req: The request to write data for.
+ *
+ * This is called when the TxFIFO has some space in it to hold a new
+ * transmission and we have something to give it. The actual setup of
+ * the data size is done elsewhere, so all we have to do is to actually
+ * write the data.
+ *
+ * The return value is zero if there is more space (or nothing was done)
+ * otherwise -ENOSPC is returned if the FIFO space was used up.
+ *
+ * This routine is only needed for PIO
+ */
+static int s3c_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req)
+{
+	bool periodic = is_ep_periodic(hs_ep);
+	u32 gnptxsts = readl(hsotg->regs + GNPTXSTS);
+	int buf_pos = hs_req->req.actual;
+	int to_write = hs_ep->size_loaded;
+	void *data;
+	int can_write;
+	int pkt_round;
+	int max_transfer;
+
+	to_write -= (buf_pos - hs_ep->last_load);
+
+	/* if there's nothing to write, get out early */
+	if (to_write == 0)
+		return 0;
+
+	if (periodic && !hsotg->dedicated_fifos) {
+		u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
+		int size_left;
+		int size_done;
+
+		/*
+		 * work out how much data was loaded so we can calculate
+		 * how much data is left in the fifo.
+		 */
+
+		size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+
+		/*
+		 * if shared fifo, we cannot write anything until the
+		 * previous data has been completely sent.
+		 */
+		if (hs_ep->fifo_load != 0) {
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
+			return -ENOSPC;
+		}
+
+		dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
+			__func__, size_left,
+			hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
+
+		/* how much of the data has moved */
+		size_done = hs_ep->size_loaded - size_left;
+
+		/* how much data is left in the fifo */
+		can_write = hs_ep->fifo_load - size_done;
+		dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
+			__func__, can_write);
+
+		can_write = hs_ep->fifo_size - can_write;
+		dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
+			__func__, can_write);
+
+		if (can_write <= 0) {
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
+			return -ENOSPC;
+		}
+	} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
+		can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index));
+
+		can_write &= 0xffff;
+		can_write *= 4;
+	} else {
+		if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) {
+			dev_dbg(hsotg->dev,
+				"%s: no queue slots available (0x%08x)\n",
+				__func__, gnptxsts);
+
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP);
+			return -ENOSPC;
+		}
+
+		can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts);
+		can_write *= 4;	/* fifo size is in 32bit quantities. */
+	}
+
+	max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
+
+	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
+		 __func__, gnptxsts, can_write, to_write, max_transfer);
+
+	/*
+	 * limit to 512 bytes of data, it seems at least on the non-periodic
+	 * FIFO, requests of >512 cause the endpoint to get stuck with a
+	 * fragment of the end of the transfer in it.
+	 */
+	if (can_write > 512 && !periodic)
+		can_write = 512;
+
+	/*
+	 * limit the write to one max-packet size worth of data, but allow
+	 * the transfer to return that it did not run out of fifo space
+	 * doing it.
+	 */
+	if (to_write > max_transfer) {
+		to_write = max_transfer;
+
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTXFEMP :
+					   GINTSTS_NPTXFEMP);
+	}
+
+	/* see if we can write data */
+
+	if (to_write > can_write) {
+		to_write = can_write;
+		pkt_round = to_write % max_transfer;
+
+		/*
+		 * Round the write down to an
+		 * exact number of packets.
+		 *
+		 * Note, we do not currently check to see if we can ever
+		 * write a full packet or not to the FIFO.
+		 */
+
+		if (pkt_round)
+			to_write -= pkt_round;
+
+		/*
+		 * enable correct FIFO interrupt to alert us when there
+		 * is more room left.
+		 */
+
+		/* it's needed only when we do not use dedicated fifos */
+		if (!hsotg->dedicated_fifos)
+			s3c_hsotg_en_gsint(hsotg,
+					   periodic ? GINTSTS_PTXFEMP :
+					   GINTSTS_NPTXFEMP);
+	}
+
+	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
+		 to_write, hs_req->req.length, can_write, buf_pos);
+
+	if (to_write <= 0)
+		return -ENOSPC;
+
+	hs_req->req.actual = buf_pos + to_write;
+	hs_ep->total_data += to_write;
+
+	if (periodic)
+		hs_ep->fifo_load += to_write;
+
+	to_write = DIV_ROUND_UP(to_write, 4);
+	data = hs_req->req.buf + buf_pos;
+
+	iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write);
+
+	return (to_write >= can_write) ? -ENOSPC : 0;
+}
+
+/**
+ * get_ep_limit - get the maximum data legnth for this endpoint
+ * @hs_ep: The endpoint
+ *
+ * Return the maximum data that can be queued in one go on a given endpoint
+ * so that transfers that are too long can be split.
+ */
+static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
+{
+	int index = hs_ep->index;
+	unsigned maxsize;
+	unsigned maxpkt;
+
+	if (index != 0) {
+		maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1;
+		maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1;
+	} else {
+		maxsize = 64+64;
+		if (hs_ep->dir_in)
+			maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1;
+		else
+			maxpkt = 2;
+	}
+
+	/* we made the constant loading easier above by using +1 */
+	maxpkt--;
+	maxsize--;
+
+	/*
+	 * constrain by packet count if maxpkts*pktsize is greater
+	 * than the length register size.
+	 */
+
+	if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
+		maxsize = maxpkt * hs_ep->ep.maxpacket;
+
+	return maxsize;
+}
+
+/**
+ * s3c_hsotg_start_req - start a USB request from an endpoint's queue
+ * @hsotg: The controller state.
+ * @hs_ep: The endpoint to process a request for
+ * @hs_req: The request to start.
+ * @continuing: True if we are doing more for the current request.
+ *
+ * Start the given request running by setting the endpoint registers
+ * appropriately, and writing any data to the FIFOs.
+ */
+static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg,
+				struct s3c_hsotg_ep *hs_ep,
+				struct s3c_hsotg_req *hs_req,
+				bool continuing)
+{
+	struct usb_request *ureq = &hs_req->req;
+	int index = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctrl_reg;
+	u32 epsize_reg;
+	u32 epsize;
+	u32 ctrl;
+	unsigned length;
+	unsigned packets;
+	unsigned maxreq;
+
+	if (index != 0) {
+		if (hs_ep->req && !continuing) {
+			dev_err(hsotg->dev, "%s: active request\n", __func__);
+			WARN_ON(1);
+			return;
+		} else if (hs_ep->req != hs_req && continuing) {
+			dev_err(hsotg->dev,
+				"%s: continue different req\n", __func__);
+			WARN_ON(1);
+			return;
+		}
+	}
+
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
+		__func__, readl(hsotg->regs + epctrl_reg), index,
+		hs_ep->dir_in ? "in" : "out");
+
+	/* If endpoint is stalled, we will restart request later */
+	ctrl = readl(hsotg->regs + epctrl_reg);
+
+	if (ctrl & DXEPCTL_STALL) {
+		dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
+		return;
+	}
+
+	length = ureq->length - ureq->actual;
+	dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n",
+		ureq->length, ureq->actual);
+
+	maxreq = get_ep_limit(hs_ep);
+	if (length > maxreq) {
+		int round = maxreq % hs_ep->ep.maxpacket;
+
+		dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
+			__func__, length, maxreq, round);
+
+		/* round down to multiple of packets */
+		if (round)
+			maxreq -= round;
+
+		length = maxreq;
+	}
+
+	if (length)
+		packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
+	else
+		packets = 1;	/* send one packet if length is zero. */
+
+	if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
+		dev_err(hsotg->dev, "req length > maxpacket*mc\n");
+		return;
+	}
+
+	if (dir_in && index != 0)
+		if (hs_ep->isochronous)
+			epsize = DXEPTSIZ_MC(packets);
+		else
+			epsize = DXEPTSIZ_MC(1);
+	else
+		epsize = 0;
+
+	/*
+	 * zero length packet should be programmed on its own and should not
+	 * be counted in DIEPTSIZ.PktCnt with other packets.
+	 */
+	if (dir_in && ureq->zero && !continuing) {
+		/* Test if zlp is actually required. */
+		if ((ureq->length >= hs_ep->ep.maxpacket) &&
+					!(ureq->length % hs_ep->ep.maxpacket))
+			hs_ep->send_zlp = 1;
+	}
+
+	epsize |= DXEPTSIZ_PKTCNT(packets);
+	epsize |= DXEPTSIZ_XFERSIZE(length);
+
+	dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
+		__func__, packets, length, ureq->length, epsize, epsize_reg);
+
+	/* store the request as the current one we're doing */
+	hs_ep->req = hs_req;
+
+	/* write size / packets */
+	writel(epsize, hsotg->regs + epsize_reg);
+
+	if (using_dma(hsotg) && !continuing) {
+		unsigned int dma_reg;
+
+		/*
+		 * write DMA address to control register, buffer already
+		 * synced by s3c_hsotg_ep_queue().
+		 */
+
+		dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
+		writel(ureq->dma, hsotg->regs + dma_reg);
+
+		dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n",
+			__func__, &ureq->dma, dma_reg);
+	}
+
+	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
+	ctrl |= DXEPCTL_USBACTEP;
+
+	dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state);
+
+	/* For Setup request do not clear NAK */
+	if (!(index == 0 && hsotg->ep0_state == DWC2_EP0_SETUP))
+		ctrl |= DXEPCTL_CNAK;	/* clear NAK set by core */
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	writel(ctrl, hsotg->regs + epctrl_reg);
+
+	/*
+	 * set these, it seems that DMA support increments past the end
+	 * of the packet buffer so we need to calculate the length from
+	 * this information.
+	 */
+	hs_ep->size_loaded = length;
+	hs_ep->last_load = ureq->actual;
+
+	if (dir_in && !using_dma(hsotg)) {
+		/* set these anyway, we may need them for non-periodic in */
+		hs_ep->fifo_load = 0;
+
+		s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	/*
+	 * clear the INTknTXFEmpMsk when we start request, more as a aide
+	 * to debugging to see what is going on.
+	 */
+	if (dir_in)
+		writel(DIEPMSK_INTKNTXFEMPMSK,
+		       hsotg->regs + DIEPINT(index));
+
+	/*
+	 * Note, trying to clear the NAK here causes problems with transmit
+	 * on the S3C6400 ending up with the TXFIFO becoming full.
+	 */
+
+	/* check ep is enabled */
+	if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
+		dev_dbg(hsotg->dev,
+			 "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n",
+			 index, readl(hsotg->regs + epctrl_reg));
+
+	dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n",
+		__func__, readl(hsotg->regs + epctrl_reg));
+
+	/* enable ep interrupts */
+	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
+}
+
+/**
+ * s3c_hsotg_map_dma - map the DMA memory being used for the request
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request is on.
+ * @req: The request being processed.
+ *
+ * We've been asked to queue a request, so ensure that the memory buffer
+ * is correctly setup for DMA. If we've been passed an extant DMA address
+ * then ensure the buffer has been synced to memory. If our buffer has no
+ * DMA memory, then we map the memory and mark our request to allow us to
+ * cleanup on completion.
+ */
+static int s3c_hsotg_map_dma(struct dwc2_hsotg *hsotg,
+			     struct s3c_hsotg_ep *hs_ep,
+			     struct usb_request *req)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	int ret;
+
+	/* if the length is zero, ignore the DMA data */
+	if (hs_req->req.length == 0)
+		return 0;
+
+	ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
+	if (ret)
+		goto dma_error;
+
+	return 0;
+
+dma_error:
+	dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
+		__func__, req->buf, req->length);
+
+	return -EIO;
+}
+
+static int s3c_hsotg_handle_unaligned_buf_start(struct dwc2_hsotg *hsotg,
+	struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req)
+{
+	void *req_buf = hs_req->req.buf;
+
+	/* If dma is not being used or buffer is aligned */
+	if (!using_dma(hsotg) || !((long)req_buf & 3))
+		return 0;
+
+	WARN_ON(hs_req->saved_req_buf);
+
+	dev_dbg(hsotg->dev, "%s: %s: buf=%p length=%d\n", __func__,
+			hs_ep->ep.name, req_buf, hs_req->req.length);
+
+	hs_req->req.buf = kmalloc(hs_req->req.length, GFP_ATOMIC);
+	if (!hs_req->req.buf) {
+		hs_req->req.buf = req_buf;
+		dev_err(hsotg->dev,
+			"%s: unable to allocate memory for bounce buffer\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Save actual buffer */
+	hs_req->saved_req_buf = req_buf;
+
+	if (hs_ep->dir_in)
+		memcpy(hs_req->req.buf, req_buf, hs_req->req.length);
+	return 0;
+}
+
+static void s3c_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg,
+	struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req)
+{
+	/* If dma is not being used or buffer was aligned */
+	if (!using_dma(hsotg) || !hs_req->saved_req_buf)
+		return;
+
+	dev_dbg(hsotg->dev, "%s: %s: status=%d actual-length=%d\n", __func__,
+		hs_ep->ep.name, hs_req->req.status, hs_req->req.actual);
+
+	/* Copy data from bounce buffer on successful out transfer */
+	if (!hs_ep->dir_in && !hs_req->req.status)
+		memcpy(hs_req->saved_req_buf, hs_req->req.buf,
+							hs_req->req.actual);
+
+	/* Free bounce buffer */
+	kfree(hs_req->req.buf);
+
+	hs_req->req.buf = hs_req->saved_req_buf;
+	hs_req->saved_req_buf = NULL;
+}
+
+static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
+			      gfp_t gfp_flags)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	bool first;
+	int ret;
+
+	dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
+		ep->name, req, req->length, req->buf, req->no_interrupt,
+		req->zero, req->short_not_ok);
+
+	/* initialise status of the request */
+	INIT_LIST_HEAD(&hs_req->queue);
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+
+	ret = s3c_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req);
+	if (ret)
+		return ret;
+
+	/* if we're using DMA, sync the buffers as necessary */
+	if (using_dma(hs)) {
+		ret = s3c_hsotg_map_dma(hs, hs_ep, req);
+		if (ret)
+			return ret;
+	}
+
+	first = list_empty(&hs_ep->queue);
+	list_add_tail(&hs_req->queue, &hs_ep->queue);
+
+	if (first)
+		s3c_hsotg_start_req(hs, hs_ep, hs_req, false);
+
+	return 0;
+}
+
+static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
+			      gfp_t gfp_flags)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_queue(ep, req, gfp_flags);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
+static void s3c_hsotg_ep_free_request(struct usb_ep *ep,
+				      struct usb_request *req)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+
+	kfree(hs_req);
+}
+
+/**
+ * s3c_hsotg_complete_oursetup - setup completion callback
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself
+ * submitted that need cleaning up.
+ */
+static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
+					struct usb_request *req)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+
+	dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
+
+	s3c_hsotg_ep_free_request(ep, req);
+}
+
+/**
+ * ep_from_windex - convert control wIndex value to endpoint
+ * @hsotg: The driver state.
+ * @windex: The control request wIndex field (in host order).
+ *
+ * Convert the given wIndex into a pointer to an driver endpoint
+ * structure, or return NULL if it is not a valid endpoint.
+ */
+static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
+					   u32 windex)
+{
+	struct s3c_hsotg_ep *ep;
+	int dir = (windex & USB_DIR_IN) ? 1 : 0;
+	int idx = windex & 0x7F;
+
+	if (windex >= 0x100)
+		return NULL;
+
+	if (idx > hsotg->num_of_eps)
+		return NULL;
+
+	ep = index_to_ep(hsotg, idx, dir);
+
+	if (idx && ep->dir_in != dir)
+		return NULL;
+
+	return ep;
+}
+
+/**
+ * s3c_hsotg_set_test_mode - Enable usb Test Modes
+ * @hsotg: The driver state.
+ * @testmode: requested usb test mode
+ * Enable usb Test Mode requested by the Host.
+ */
+static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
+{
+	int dctl = readl(hsotg->regs + DCTL);
+
+	dctl &= ~DCTL_TSTCTL_MASK;
+	switch (testmode) {
+	case TEST_J:
+	case TEST_K:
+	case TEST_SE0_NAK:
+	case TEST_PACKET:
+	case TEST_FORCE_EN:
+		dctl |= testmode << DCTL_TSTCTL_SHIFT;
+		break;
+	default:
+		return -EINVAL;
+	}
+	writel(dctl, hsotg->regs + DCTL);
+	return 0;
+}
+
+/**
+ * s3c_hsotg_send_reply - send reply to control request
+ * @hsotg: The device state
+ * @ep: Endpoint 0
+ * @buff: Buffer for request
+ * @length: Length of reply.
+ *
+ * Create a request and queue it on the given endpoint. This is useful as
+ * an internal method of sending replies to certain control requests, etc.
+ */
+static int s3c_hsotg_send_reply(struct dwc2_hsotg *hsotg,
+				struct s3c_hsotg_ep *ep,
+				void *buff,
+				int length)
+{
+	struct usb_request *req;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
+
+	req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
+	hsotg->ep0_reply = req;
+	if (!req) {
+		dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
+		return -ENOMEM;
+	}
+
+	req->buf = hsotg->ep0_buff;
+	req->length = length;
+	/*
+	 * zero flag is for sending zlp in DATA IN stage. It has no impact on
+	 * STATUS stage.
+	 */
+	req->zero = 0;
+	req->complete = s3c_hsotg_complete_oursetup;
+
+	if (length)
+		memcpy(req->buf, buff, length);
+
+	ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
+	if (ret) {
+		dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_process_req_status - process request GET_STATUS
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0];
+	struct s3c_hsotg_ep *ep;
+	__le16 reply;
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
+
+	if (!ep0->dir_in) {
+		dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		reply = cpu_to_le16(0); /* bit 0 => self powered,
+					 * bit 1 => remote wakeup */
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/* currently, the data result should be zero */
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
+		if (!ep)
+			return -ENOENT;
+
+		reply = cpu_to_le16(ep->halted ? 1 : 0);
+		break;
+
+	default:
+		return 0;
+	}
+
+	if (le16_to_cpu(ctrl->wLength) != 2)
+		return -EINVAL;
+
+	ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2);
+	if (ret) {
+		dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
+		return ret;
+	}
+
+	return 1;
+}
+
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value);
+
+/**
+ * get_ep_head - return the first request on the endpoint
+ * @hs_ep: The controller endpoint to get
+ *
+ * Get the first request on the endpoint.
+ */
+static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep)
+{
+	if (list_empty(&hs_ep->queue))
+		return NULL;
+
+	return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue);
+}
+
+/**
+ * s3c_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE
+ * @hsotg: The device state
+ * @ctrl: USB control request
+ */
+static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
+					 struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0];
+	struct s3c_hsotg_req *hs_req;
+	bool restart;
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	struct s3c_hsotg_ep *ep;
+	int ret;
+	bool halted;
+	u32 recip;
+	u32 wValue;
+	u32 wIndex;
+
+	dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
+		__func__, set ? "SET" : "CLEAR");
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		switch (wValue) {
+		case USB_DEVICE_TEST_MODE:
+			if ((wIndex & 0xff) != 0)
+				return -EINVAL;
+			if (!set)
+				return -EINVAL;
+
+			hsotg->test_mode = wIndex >> 8;
+			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			if (ret) {
+				dev_err(hsotg->dev,
+					"%s: failed to send reply\n", __func__);
+				return ret;
+			}
+			break;
+		default:
+			return -ENOENT;
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ep = ep_from_windex(hsotg, wIndex);
+		if (!ep) {
+			dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
+				__func__, wIndex);
+			return -ENOENT;
+		}
+
+		switch (wValue) {
+		case USB_ENDPOINT_HALT:
+			halted = ep->halted;
+
+			s3c_hsotg_ep_sethalt(&ep->ep, set);
+
+			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			if (ret) {
+				dev_err(hsotg->dev,
+					"%s: failed to send reply\n", __func__);
+				return ret;
+			}
+
+			/*
+			 * we have to complete all requests for ep if it was
+			 * halted, and the halt was cleared by CLEAR_FEATURE
+			 */
+
+			if (!set && halted) {
+				/*
+				 * If we have request in progress,
+				 * then complete it
+				 */
+				if (ep->req) {
+					hs_req = ep->req;
+					ep->req = NULL;
+					list_del_init(&hs_req->queue);
+					if (hs_req->req.complete) {
+						spin_unlock(&hsotg->lock);
+						usb_gadget_giveback_request(
+							&ep->ep, &hs_req->req);
+						spin_lock(&hsotg->lock);
+					}
+				}
+
+				/* If we have pending request, then start it */
+				if (!ep->req) {
+					restart = !list_empty(&ep->queue);
+					if (restart) {
+						hs_req = get_ep_head(ep);
+						s3c_hsotg_start_req(hsotg, ep,
+								hs_req, false);
+					}
+				}
+			}
+
+			break;
+
+		default:
+			return -ENOENT;
+		}
+		break;
+	default:
+		return -ENOENT;
+	}
+	return 1;
+}
+
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg);
+
+/**
+ * s3c_hsotg_stall_ep0 - stall ep0
+ * @hsotg: The device state
+ *
+ * Set stall for ep0 as response for setup request.
+ */
+static void s3c_hsotg_stall_ep0(struct dwc2_hsotg *hsotg)
+{
+	struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0];
+	u32 reg;
+	u32 ctrl;
+
+	dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
+	reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
+
+	/*
+	 * DxEPCTL_Stall will be cleared by EP once it has
+	 * taken effect, so no need to clear later.
+	 */
+
+	ctrl = readl(hsotg->regs + reg);
+	ctrl |= DXEPCTL_STALL;
+	ctrl |= DXEPCTL_CNAK;
+	writel(ctrl, hsotg->regs + reg);
+
+	dev_dbg(hsotg->dev,
+		"written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n",
+		ctrl, reg, readl(hsotg->regs + reg));
+
+	 /*
+	  * complete won't be called, so we enqueue
+	  * setup request here
+	  */
+	 s3c_hsotg_enqueue_setup(hsotg);
+}
+
+/**
+ * s3c_hsotg_process_control - process a control request
+ * @hsotg: The device state
+ * @ctrl: The control request received
+ *
+ * The controller has received the SETUP phase of a control request, and
+ * needs to work out what to do next (and whether to pass it on to the
+ * gadget driver).
+ */
+static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg,
+				      struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0];
+	int ret = 0;
+	u32 dcfg;
+
+	dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n",
+		 ctrl->bRequest, ctrl->bRequestType,
+		 ctrl->wValue, ctrl->wLength);
+
+	if (ctrl->wLength == 0) {
+		ep0->dir_in = 1;
+		hsotg->ep0_state = DWC2_EP0_STATUS_IN;
+	} else if (ctrl->bRequestType & USB_DIR_IN) {
+		ep0->dir_in = 1;
+		hsotg->ep0_state = DWC2_EP0_DATA_IN;
+	} else {
+		ep0->dir_in = 0;
+		hsotg->ep0_state = DWC2_EP0_DATA_OUT;
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			hsotg->connected = 1;
+			dcfg = readl(hsotg->regs + DCFG);
+			dcfg &= ~DCFG_DEVADDR_MASK;
+			dcfg |= (le16_to_cpu(ctrl->wValue) <<
+				 DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK;
+			writel(dcfg, hsotg->regs + DCFG);
+
+			dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
+
+			ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0);
+			return;
+
+		case USB_REQ_GET_STATUS:
+			ret = s3c_hsotg_process_req_status(hsotg, ctrl);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+			ret = s3c_hsotg_process_req_feature(hsotg, ctrl);
+			break;
+		}
+	}
+
+	/* as a fallback, try delivering it to the driver to deal with */
+
+	if (ret == 0 && hsotg->driver) {
+		spin_unlock(&hsotg->lock);
+		ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
+		spin_lock(&hsotg->lock);
+		if (ret < 0)
+			dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
+	}
+
+	/*
+	 * the request is either unhandlable, or is not formatted correctly
+	 * so respond with a STALL for the status stage to indicate failure.
+	 */
+
+	if (ret < 0)
+		s3c_hsotg_stall_ep0(hsotg);
+}
+
+/**
+ * s3c_hsotg_complete_setup - completion of a setup transfer
+ * @ep: The endpoint the request was on.
+ * @req: The request completed.
+ *
+ * Called on completion of any requests the driver itself submitted for
+ * EP0 setup packets
+ */
+static void s3c_hsotg_complete_setup(struct usb_ep *ep,
+				     struct usb_request *req)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+
+	if (req->status < 0) {
+		dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
+		return;
+	}
+
+	spin_lock(&hsotg->lock);
+	if (req->actual == 0)
+		s3c_hsotg_enqueue_setup(hsotg);
+	else
+		s3c_hsotg_process_control(hsotg, req->buf);
+	spin_unlock(&hsotg->lock);
+}
+
+/**
+ * s3c_hsotg_enqueue_setup - start a request for EP0 packets
+ * @hsotg: The device state.
+ *
+ * Enqueue a request on EP0 if necessary to received any SETUP packets
+ * received from the host.
+ */
+static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
+{
+	struct usb_request *req = hsotg->ctrl_req;
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	int ret;
+
+	dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
+
+	req->zero = 0;
+	req->length = 8;
+	req->buf = hsotg->ctrl_buff;
+	req->complete = s3c_hsotg_complete_setup;
+
+	if (!list_empty(&hs_req->queue)) {
+		dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
+		return;
+	}
+
+	hsotg->eps_out[0]->dir_in = 0;
+	hsotg->eps_out[0]->send_zlp = 0;
+	hsotg->ep0_state = DWC2_EP0_SETUP;
+
+	ret = s3c_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC);
+	if (ret < 0) {
+		dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
+		/*
+		 * Don't think there's much we can do other than watch the
+		 * driver fail.
+		 */
+	}
+}
+
+static void s3c_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
+					struct s3c_hsotg_ep *hs_ep)
+{
+	u32 ctrl;
+	u8 index = hs_ep->index;
+	u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
+
+	if (hs_ep->dir_in)
+		dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n",
+									index);
+	else
+		dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
+									index);
+
+	writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
+			DXEPTSIZ_XFERSIZE(0), hsotg->regs +
+			epsiz_reg);
+
+	ctrl = readl(hsotg->regs + epctl_reg);
+	ctrl |= DXEPCTL_CNAK;  /* clear NAK set by core */
+	ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
+	ctrl |= DXEPCTL_USBACTEP;
+	writel(ctrl, hsotg->regs + epctl_reg);
+}
+
+/**
+ * s3c_hsotg_complete_request - complete a request given to us
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint the request was on.
+ * @hs_req: The request to complete.
+ * @result: The result code (0 => Ok, otherwise errno)
+ *
+ * The given request has finished, so call the necessary completion
+ * if it has one and then look to see if we can start a new request
+ * on the endpoint.
+ *
+ * Note, expects the ep to already be locked as appropriate.
+ */
+static void s3c_hsotg_complete_request(struct dwc2_hsotg *hsotg,
+				       struct s3c_hsotg_ep *hs_ep,
+				       struct s3c_hsotg_req *hs_req,
+				       int result)
+{
+	bool restart;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
+		return;
+	}
+
+	dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
+		hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
+
+	/*
+	 * only replace the status if we've not already set an error
+	 * from a previous transaction
+	 */
+
+	if (hs_req->req.status == -EINPROGRESS)
+		hs_req->req.status = result;
+
+	s3c_hsotg_handle_unaligned_buf_complete(hsotg, hs_ep, hs_req);
+
+	hs_ep->req = NULL;
+	list_del_init(&hs_req->queue);
+
+	if (using_dma(hsotg))
+		s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
+
+	/*
+	 * call the complete request with the locks off, just in case the
+	 * request tries to queue more work for this endpoint.
+	 */
+
+	if (hs_req->req.complete) {
+		spin_unlock(&hsotg->lock);
+		usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req);
+		spin_lock(&hsotg->lock);
+	}
+
+	/*
+	 * Look to see if there is anything else to do. Note, the completion
+	 * of the previous request may have caused a new request to be started
+	 * so be careful when doing this.
+	 */
+
+	if (!hs_ep->req && result >= 0) {
+		restart = !list_empty(&hs_ep->queue);
+		if (restart) {
+			hs_req = get_ep_head(hs_ep);
+			s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+		}
+	}
+}
+
+/**
+ * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint
+ * @hsotg: The device state.
+ * @ep_idx: The endpoint index for the data
+ * @size: The size of data in the fifo, in bytes
+ *
+ * The FIFO status shows there is data to read from the FIFO for a given
+ * endpoint, so sort out whether we need to read the data into a request
+ * that has been made for that endpoint.
+ */
+static void s3c_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size)
+{
+	struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[ep_idx];
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx);
+	int to_read;
+	int max_req;
+	int read_ptr;
+
+
+	if (!hs_req) {
+		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
+		int ptr;
+
+		dev_dbg(hsotg->dev,
+			 "%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n",
+			 __func__, size, ep_idx, epctl);
+
+		/* dump the data from the FIFO, we've nothing we can do */
+		for (ptr = 0; ptr < size; ptr += 4)
+			(void)readl(fifo);
+
+		return;
+	}
+
+	to_read = size;
+	read_ptr = hs_req->req.actual;
+	max_req = hs_req->req.length - read_ptr;
+
+	dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
+		__func__, to_read, max_req, read_ptr, hs_req->req.length);
+
+	if (to_read > max_req) {
+		/*
+		 * more data appeared than we where willing
+		 * to deal with in this request.
+		 */
+
+		/* currently we don't deal this */
+		WARN_ON_ONCE(1);
+	}
+
+	hs_ep->total_data += to_read;
+	hs_req->req.actual += to_read;
+	to_read = DIV_ROUND_UP(to_read, 4);
+
+	/*
+	 * note, we might over-write the buffer end by 3 bytes depending on
+	 * alignment of the data.
+	 */
+	ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read);
+}
+
+/**
+ * s3c_hsotg_ep0_zlp - send/receive zero-length packet on control endpoint
+ * @hsotg: The device instance
+ * @dir_in: If IN zlp
+ *
+ * Generate a zero-length IN packet request for terminating a SETUP
+ * transaction.
+ *
+ * Note, since we don't write any data to the TxFIFO, then it is
+ * currently believed that we do not need to wait for any space in
+ * the TxFIFO.
+ */
+static void s3c_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in)
+{
+	/* eps_out[0] is used in both directions */
+	hsotg->eps_out[0]->dir_in = dir_in;
+	hsotg->ep0_state = dir_in ? DWC2_EP0_STATUS_IN : DWC2_EP0_STATUS_OUT;
+
+	s3c_hsotg_program_zlp(hsotg, hsotg->eps_out[0]);
+}
+
+/**
+ * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
+ * @hsotg: The device instance
+ * @epnum: The endpoint received from
+ *
+ * The RXFIFO has delivered an OutDone event, which means that the data
+ * transfer for an OUT endpoint has been completed, either by a short
+ * packet or by the finish of a transfer.
+ */
+static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
+{
+	u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
+	struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[epnum];
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	struct usb_request *req = &hs_req->req;
+	unsigned size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+	int result = 0;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
+		return;
+	}
+
+	if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_OUT) {
+		dev_dbg(hsotg->dev, "zlp packet received\n");
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+		s3c_hsotg_enqueue_setup(hsotg);
+		return;
+	}
+
+	if (using_dma(hsotg)) {
+		unsigned size_done;
+
+		/*
+		 * Calculate the size of the transfer by checking how much
+		 * is left in the endpoint size register and then working it
+		 * out from the amount we loaded for the transfer.
+		 *
+		 * We need to do this as DMA pointers are always 32bit aligned
+		 * so may overshoot/undershoot the transfer.
+		 */
+
+		size_done = hs_ep->size_loaded - size_left;
+		size_done += hs_ep->last_load;
+
+		req->actual = size_done;
+	}
+
+	/* if there is more request to do, schedule new transfer */
+	if (req->actual < req->length && size_left == 0) {
+		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+		return;
+	}
+
+	if (req->actual < req->length && req->short_not_ok) {
+		dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
+			__func__, req->actual, req->length);
+
+		/*
+		 * todo - what should we return here? there's no one else
+		 * even bothering to check the status.
+		 */
+	}
+
+	if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
+		/* Move to STATUS IN */
+		s3c_hsotg_ep0_zlp(hsotg, true);
+		return;
+	}
+
+	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
+}
+
+/**
+ * s3c_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+ */
+static u32 s3c_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+
+	dsts = readl(hsotg->regs + DSTS);
+	dsts &= DSTS_SOFFN_MASK;
+	dsts >>= DSTS_SOFFN_SHIFT;
+
+	return dsts;
+}
+
+/**
+ * s3c_hsotg_handle_rx - RX FIFO has data
+ * @hsotg: The device instance
+ *
+ * The IRQ handler has detected that the RX FIFO has some data in it
+ * that requires processing, so find out what is in there and do the
+ * appropriate read.
+ *
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
+ * chunks, so if you have x packets received on an endpoint you'll get x
+ * FIFO events delivered, each with a packet's worth of data in it.
+ *
+ * When using DMA, we should not be processing events from the RXFIFO
+ * as the actual data should be sent to the memory directly and we turn
+ * on the completion interrupts to get notifications of transfer completion.
+ */
+static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
+{
+	u32 grxstsr = readl(hsotg->regs + GRXSTSP);
+	u32 epnum, status, size;
+
+	WARN_ON(using_dma(hsotg));
+
+	epnum = grxstsr & GRXSTS_EPNUM_MASK;
+	status = grxstsr & GRXSTS_PKTSTS_MASK;
+
+	size = grxstsr & GRXSTS_BYTECNT_MASK;
+	size >>= GRXSTS_BYTECNT_SHIFT;
+
+	dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
+			__func__, grxstsr, size, epnum);
+
+	switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) {
+	case GRXSTS_PKTSTS_GLOBALOUTNAK:
+		dev_dbg(hsotg->dev, "GLOBALOUTNAK\n");
+		break;
+
+	case GRXSTS_PKTSTS_OUTDONE:
+		dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg));
+
+		if (!using_dma(hsotg))
+			s3c_hsotg_handle_outdone(hsotg, epnum);
+		break;
+
+	case GRXSTS_PKTSTS_SETUPDONE:
+		dev_dbg(hsotg->dev,
+			"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg),
+			readl(hsotg->regs + DOEPCTL(0)));
+		/*
+		 * Call s3c_hsotg_handle_outdone here if it was not called from
+		 * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't
+		 * generate GRXSTS_PKTSTS_OUTDONE for setup packet.
+		 */
+		if (hsotg->ep0_state == DWC2_EP0_SETUP)
+			s3c_hsotg_handle_outdone(hsotg, epnum);
+		break;
+
+	case GRXSTS_PKTSTS_OUTRX:
+		s3c_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	case GRXSTS_PKTSTS_SETUPRX:
+		dev_dbg(hsotg->dev,
+			"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
+			s3c_hsotg_read_frameno(hsotg),
+			readl(hsotg->regs + DOEPCTL(0)));
+
+		WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP);
+
+		s3c_hsotg_rx_data(hsotg, epnum, size);
+		break;
+
+	default:
+		dev_warn(hsotg->dev, "%s: unknown status %08x\n",
+			 __func__, grxstsr);
+
+		s3c_hsotg_dump(hsotg);
+		break;
+	}
+}
+
+/**
+ * s3c_hsotg_ep0_mps - turn max packet size into register setting
+ * @mps: The maximum packet size in bytes.
+ */
+static u32 s3c_hsotg_ep0_mps(unsigned int mps)
+{
+	switch (mps) {
+	case 64:
+		return D0EPCTL_MPS_64;
+	case 32:
+		return D0EPCTL_MPS_32;
+	case 16:
+		return D0EPCTL_MPS_16;
+	case 8:
+		return D0EPCTL_MPS_8;
+	}
+
+	/* bad max packet size, warn and return invalid result */
+	WARN_ON(1);
+	return (u32)-1;
+}
+
+/**
+ * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field
+ * @hsotg: The driver state.
+ * @ep: The index number of the endpoint
+ * @mps: The maximum packet size in bytes
+ *
+ * Configure the maximum packet size for the given endpoint, updating
+ * the hardware control registers to reflect this.
+ */
+static void s3c_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg,
+			unsigned int ep, unsigned int mps, unsigned int dir_in)
+{
+	struct s3c_hsotg_ep *hs_ep;
+	void __iomem *regs = hsotg->regs;
+	u32 mpsval;
+	u32 mcval;
+	u32 reg;
+
+	hs_ep = index_to_ep(hsotg, ep, dir_in);
+	if (!hs_ep)
+		return;
+
+	if (ep == 0) {
+		/* EP0 is a special case */
+		mpsval = s3c_hsotg_ep0_mps(mps);
+		if (mpsval > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mps;
+		hs_ep->mc = 1;
+	} else {
+		mpsval = mps & DXEPCTL_MPS_MASK;
+		if (mpsval > 1024)
+			goto bad_mps;
+		mcval = ((mps >> 11) & 0x3) + 1;
+		hs_ep->mc = mcval;
+		if (mcval > 3)
+			goto bad_mps;
+		hs_ep->ep.maxpacket = mpsval;
+	}
+
+	if (dir_in) {
+		reg = readl(regs + DIEPCTL(ep));
+		reg &= ~DXEPCTL_MPS_MASK;
+		reg |= mpsval;
+		writel(reg, regs + DIEPCTL(ep));
+	} else {
+		reg = readl(regs + DOEPCTL(ep));
+		reg &= ~DXEPCTL_MPS_MASK;
+		reg |= mpsval;
+		writel(reg, regs + DOEPCTL(ep));
+	}
+
+	return;
+
+bad_mps:
+	dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
+}
+
+/**
+ * s3c_hsotg_txfifo_flush - flush Tx FIFO
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ */
+static void s3c_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx)
+{
+	int timeout;
+	int val;
+
+	writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
+		hsotg->regs + GRSTCTL);
+
+	/* wait until the fifo is flushed */
+	timeout = 100;
+
+	while (1) {
+		val = readl(hsotg->regs + GRSTCTL);
+
+		if ((val & (GRSTCTL_TXFFLSH)) == 0)
+			break;
+
+		if (--timeout == 0) {
+			dev_err(hsotg->dev,
+				"%s: timeout flushing fifo (GRSTCTL=%08x)\n",
+				__func__, val);
+			break;
+		}
+
+		udelay(1);
+	}
+}
+
+/**
+ * s3c_hsotg_trytx - check to see if anything needs transmitting
+ * @hsotg: The driver state
+ * @hs_ep: The driver endpoint to check.
+ *
+ * Check to see if there is a request that has data to send, and if so
+ * make an attempt to write data into the FIFO.
+ */
+static int s3c_hsotg_trytx(struct dwc2_hsotg *hsotg,
+			   struct s3c_hsotg_ep *hs_ep)
+{
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+
+	if (!hs_ep->dir_in || !hs_req) {
+		/**
+		 * if request is not enqueued, we disable interrupts
+		 * for endpoints, excepting ep0
+		 */
+		if (hs_ep->index != 0)
+			s3c_hsotg_ctrl_epint(hsotg, hs_ep->index,
+					     hs_ep->dir_in, 0);
+		return 0;
+	}
+
+	if (hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
+			hs_ep->index);
+		return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_complete_in - complete IN transfer
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint that has just completed.
+ *
+ * An IN transfer has been completed, update the transfer's state and then
+ * call the relevant completion routines.
+ */
+static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
+				  struct s3c_hsotg_ep *hs_ep)
+{
+	struct s3c_hsotg_req *hs_req = hs_ep->req;
+	u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
+	int size_left, size_done;
+
+	if (!hs_req) {
+		dev_dbg(hsotg->dev, "XferCompl but no req\n");
+		return;
+	}
+
+	/* Finish ZLP handling for IN EP0 transactions */
+	if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) {
+		dev_dbg(hsotg->dev, "zlp packet sent\n");
+		s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+		if (hsotg->test_mode) {
+			int ret;
+
+			ret = s3c_hsotg_set_test_mode(hsotg, hsotg->test_mode);
+			if (ret < 0) {
+				dev_dbg(hsotg->dev, "Invalid Test #%d\n",
+						hsotg->test_mode);
+				s3c_hsotg_stall_ep0(hsotg);
+				return;
+			}
+		}
+		s3c_hsotg_enqueue_setup(hsotg);
+		return;
+	}
+
+	/*
+	 * Calculate the size of the transfer by checking how much is left
+	 * in the endpoint size register and then working it out from
+	 * the amount we loaded for the transfer.
+	 *
+	 * We do this even for DMA, as the transfer may have incremented
+	 * past the end of the buffer (DMA transfers are always 32bit
+	 * aligned).
+	 */
+
+	size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
+
+	size_done = hs_ep->size_loaded - size_left;
+	size_done += hs_ep->last_load;
+
+	if (hs_req->req.actual != size_done)
+		dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
+			__func__, hs_req->req.actual, size_done);
+
+	hs_req->req.actual = size_done;
+	dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n",
+		hs_req->req.length, hs_req->req.actual, hs_req->req.zero);
+
+	if (!size_left && hs_req->req.actual < hs_req->req.length) {
+		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
+		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
+		return;
+	}
+
+	/* Zlp for all endpoints, for ep0 only in DATA IN stage */
+	if (hs_ep->send_zlp) {
+		s3c_hsotg_program_zlp(hsotg, hs_ep);
+		hs_ep->send_zlp = 0;
+		/* transfer will be completed on next complete interrupt */
+		return;
+	}
+
+	if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {
+		/* Move to STATUS OUT */
+		s3c_hsotg_ep0_zlp(hsotg, false);
+		return;
+	}
+
+	s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
+}
+
+/**
+ * s3c_hsotg_epint - handle an in/out endpoint interrupt
+ * @hsotg: The driver state
+ * @idx: The index for the endpoint (0..15)
+ * @dir_in: Set if this is an IN endpoint
+ *
+ * Process and clear any interrupt pending for an individual endpoint
+ */
+static void s3c_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
+			    int dir_in)
+{
+	struct s3c_hsotg_ep *hs_ep = index_to_ep(hsotg, idx, dir_in);
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
+	u32 ints;
+	u32 ctrl;
+
+	ints = readl(hsotg->regs + epint_reg);
+	ctrl = readl(hsotg->regs + epctl_reg);
+
+	/* Clear endpoint interrupts */
+	writel(ints, hsotg->regs + epint_reg);
+
+	if (!hs_ep) {
+		dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n",
+					__func__, idx, dir_in ? "in" : "out");
+		return;
+	}
+
+	dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
+		__func__, idx, dir_in ? "in" : "out", ints);
+
+	/* Don't process XferCompl interrupt if it is a setup packet */
+	if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
+		ints &= ~DXEPINT_XFERCOMPL;
+
+	if (ints & DXEPINT_XFERCOMPL) {
+		if (hs_ep->isochronous && hs_ep->interval == 1) {
+			if (ctrl & DXEPCTL_EOFRNUM)
+				ctrl |= DXEPCTL_SETEVENFR;
+			else
+				ctrl |= DXEPCTL_SETODDFR;
+			writel(ctrl, hsotg->regs + epctl_reg);
+		}
+
+		dev_dbg(hsotg->dev,
+			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
+			__func__, readl(hsotg->regs + epctl_reg),
+			readl(hsotg->regs + epsiz_reg));
+
+		/*
+		 * we get OutDone from the FIFO, so we only need to look
+		 * at completing IN requests here
+		 */
+		if (dir_in) {
+			s3c_hsotg_complete_in(hsotg, hs_ep);
+
+			if (idx == 0 && !hs_ep->req)
+				s3c_hsotg_enqueue_setup(hsotg);
+		} else if (using_dma(hsotg)) {
+			/*
+			 * We're using DMA, we need to fire an OutDone here
+			 * as we ignore the RXFIFO.
+			 */
+
+			s3c_hsotg_handle_outdone(hsotg, idx);
+		}
+	}
+
+	if (ints & DXEPINT_EPDISBLD) {
+		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+
+		if (dir_in) {
+			int epctl = readl(hsotg->regs + epctl_reg);
+
+			s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+			if ((epctl & DXEPCTL_STALL) &&
+				(epctl & DXEPCTL_EPTYPE_BULK)) {
+				int dctl = readl(hsotg->regs + DCTL);
+
+				dctl |= DCTL_CGNPINNAK;
+				writel(dctl, hsotg->regs + DCTL);
+			}
+		}
+	}
+
+	if (ints & DXEPINT_AHBERR)
+		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
+
+	if (ints & DXEPINT_SETUP) {  /* Setup or Timeout */
+		dev_dbg(hsotg->dev, "%s: Setup/Timeout\n",  __func__);
+
+		if (using_dma(hsotg) && idx == 0) {
+			/*
+			 * this is the notification we've received a
+			 * setup packet. In non-DMA mode we'd get this
+			 * from the RXFIFO, instead we need to process
+			 * the setup here.
+			 */
+
+			if (dir_in)
+				WARN_ON_ONCE(1);
+			else
+				s3c_hsotg_handle_outdone(hsotg, 0);
+		}
+	}
+
+	if (ints & DXEPINT_BACK2BACKSETUP)
+		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
+
+	if (dir_in && !hs_ep->isochronous) {
+		/* not sure if this is important, but we'll clear it anyway */
+		if (ints & DIEPMSK_INTKNTXFEMPMSK) {
+			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
+				__func__, idx);
+		}
+
+		/* this probably means something bad is happening */
+		if (ints & DIEPMSK_INTKNEPMISMSK) {
+			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
+				 __func__, idx);
+		}
+
+		/* FIFO has space or is empty (see GAHBCFG) */
+		if (hsotg->dedicated_fifos &&
+		    ints & DIEPMSK_TXFIFOEMPTY) {
+			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
+				__func__, idx);
+			if (!using_dma(hsotg))
+				s3c_hsotg_trytx(hsotg, hs_ep);
+		}
+	}
+}
+
+/**
+ * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
+ * @hsotg: The device state.
+ *
+ * Handle updating the device settings after the enumeration phase has
+ * been completed.
+ */
+static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts = readl(hsotg->regs + DSTS);
+	int ep0_mps = 0, ep_mps = 8;
+
+	/*
+	 * This should signal the finish of the enumeration phase
+	 * of the USB handshaking, so we should now know what rate
+	 * we connected at.
+	 */
+
+	dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
+
+	/*
+	 * note, since we're limited by the size of transfer on EP0, and
+	 * it seems IN transfers must be a even number of packets we do
+	 * not advertise a 64byte MPS on EP0.
+	 */
+
+	/* catch both EnumSpd_FS and EnumSpd_FS48 */
+	switch (dsts & DSTS_ENUMSPD_MASK) {
+	case DSTS_ENUMSPD_FS:
+	case DSTS_ENUMSPD_FS48:
+		hsotg->gadget.speed = USB_SPEED_FULL;
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 1023;
+		break;
+
+	case DSTS_ENUMSPD_HS:
+		hsotg->gadget.speed = USB_SPEED_HIGH;
+		ep0_mps = EP0_MPS_LIMIT;
+		ep_mps = 1024;
+		break;
+
+	case DSTS_ENUMSPD_LS:
+		hsotg->gadget.speed = USB_SPEED_LOW;
+		/*
+		 * note, we don't actually support LS in this driver at the
+		 * moment, and the documentation seems to imply that it isn't
+		 * supported by the PHYs on some of the devices.
+		 */
+		break;
+	}
+	dev_info(hsotg->dev, "new device is %s\n",
+		 usb_speed_string(hsotg->gadget.speed));
+
+	/*
+	 * we should now know the maximum packet size for an
+	 * endpoint, so set the endpoints to a default value.
+	 */
+
+	if (ep0_mps) {
+		int i;
+		/* Initialize ep0 for both in and out directions */
+		s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 1);
+		s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0);
+		for (i = 1; i < hsotg->num_of_eps; i++) {
+			if (hsotg->eps_in[i])
+				s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 1);
+			if (hsotg->eps_out[i])
+				s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 0);
+		}
+	}
+
+	/* ensure after enumeration our EP0 is active */
+
+	s3c_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
+}
+
+/**
+ * kill_all_requests - remove all requests from the endpoint's queue
+ * @hsotg: The device state.
+ * @ep: The endpoint the requests may be on.
+ * @result: The result code to use.
+ *
+ * Go through the requests on the given endpoint and mark them
+ * completed with the given result code.
+ */
+static void kill_all_requests(struct dwc2_hsotg *hsotg,
+			      struct s3c_hsotg_ep *ep,
+			      int result)
+{
+	struct s3c_hsotg_req *req, *treq;
+	unsigned size;
+
+	ep->req = NULL;
+
+	list_for_each_entry_safe(req, treq, &ep->queue, queue)
+		s3c_hsotg_complete_request(hsotg, ep, req,
+					   result);
+
+	if (!hsotg->dedicated_fifos)
+		return;
+	size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
+	if (size < ep->fifo_size)
+		s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index);
+}
+
+/**
+ * s3c_hsotg_disconnect - disconnect service
+ * @hsotg: The device state.
+ *
+ * The device has been disconnected. Remove all current
+ * transactions and signal the gadget driver that this
+ * has happened.
+ */
+void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg)
+{
+	unsigned ep;
+
+	if (!hsotg->connected)
+		return;
+
+	hsotg->connected = 0;
+	hsotg->test_mode = 0;
+
+	for (ep = 0; ep < hsotg->num_of_eps; ep++) {
+		if (hsotg->eps_in[ep])
+			kill_all_requests(hsotg, hsotg->eps_in[ep],
+								-ESHUTDOWN);
+		if (hsotg->eps_out[ep])
+			kill_all_requests(hsotg, hsotg->eps_out[ep],
+								-ESHUTDOWN);
+	}
+
+	call_gadget(hsotg, disconnect);
+}
+EXPORT_SYMBOL_GPL(s3c_hsotg_disconnect);
+
+/**
+ * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
+ * @hsotg: The device state:
+ * @periodic: True if this is a periodic FIFO interrupt
+ */
+static void s3c_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
+{
+	struct s3c_hsotg_ep *ep;
+	int epno, ret;
+
+	/* look through for any more data to transmit */
+	for (epno = 0; epno < hsotg->num_of_eps; epno++) {
+		ep = index_to_ep(hsotg, epno, 1);
+
+		if (!ep)
+			continue;
+
+		if (!ep->dir_in)
+			continue;
+
+		if ((periodic && !ep->periodic) ||
+		    (!periodic && ep->periodic))
+			continue;
+
+		ret = s3c_hsotg_trytx(hsotg, ep);
+		if (ret < 0)
+			break;
+	}
+}
+
+/* IRQ flags which will trigger a retry around the IRQ loop */
+#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \
+			GINTSTS_PTXFEMP |  \
+			GINTSTS_RXFLVL)
+
+/**
+ * s3c_hsotg_corereset - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
+static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg)
+{
+	int timeout;
+	u32 grstctl;
+
+	dev_dbg(hsotg->dev, "resetting core\n");
+
+	/* issue soft reset */
+	writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
+
+	timeout = 10000;
+	do {
+		grstctl = readl(hsotg->regs + GRSTCTL);
+	} while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0);
+
+	if (grstctl & GRSTCTL_CSFTRST) {
+		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
+		return -EINVAL;
+	}
+
+	timeout = 10000;
+
+	while (1) {
+		u32 grstctl = readl(hsotg->regs + GRSTCTL);
+
+		if (timeout-- < 0) {
+			dev_info(hsotg->dev,
+				 "%s: reset failed, GRSTCTL=%08x\n",
+				 __func__, grstctl);
+			return -ETIMEDOUT;
+		}
+
+		if (!(grstctl & GRSTCTL_AHBIDLE))
+			continue;
+
+		break;		/* reset done */
+	}
+
+	dev_dbg(hsotg->dev, "reset successful\n");
+	return 0;
+}
+
+/**
+ * s3c_hsotg_core_init - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
+void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
+						bool is_usb_reset)
+{
+	u32 val;
+
+	if (!is_usb_reset)
+		s3c_hsotg_corereset(hsotg);
+
+	/*
+	 * we must now enable ep0 ready for host detection and then
+	 * set configuration.
+	 */
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
+	writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
+	       (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
+
+	s3c_hsotg_init_fifo(hsotg);
+
+	if (!is_usb_reset)
+		__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
+
+	writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS,  hsotg->regs + DCFG);
+
+	/* Clear any pending OTG interrupts */
+	writel(0xffffffff, hsotg->regs + GOTGINT);
+
+	/* Clear any pending interrupts */
+	writel(0xffffffff, hsotg->regs + GINTSTS);
+
+	writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
+		GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
+		GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST |
+		GINTSTS_ENUMDONE | GINTSTS_OTGINT |
+		GINTSTS_USBSUSP | GINTSTS_WKUPINT,
+		hsotg->regs + GINTMSK);
+
+	if (using_dma(hsotg))
+		writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
+		       (GAHBCFG_HBSTLEN_INCR4 << GAHBCFG_HBSTLEN_SHIFT),
+		       hsotg->regs + GAHBCFG);
+	else
+		writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL |
+						    GAHBCFG_P_TXF_EMP_LVL) : 0) |
+		       GAHBCFG_GLBL_INTR_EN,
+		       hsotg->regs + GAHBCFG);
+
+	/*
+	 * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
+	 * when we have no data to transfer. Otherwise we get being flooded by
+	 * interrupts.
+	 */
+
+	writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
+		DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
+		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
+		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
+		DIEPMSK_INTKNEPMISMSK,
+		hsotg->regs + DIEPMSK);
+
+	/*
+	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
+	 * DMA mode we may need this.
+	 */
+	writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
+				    DIEPMSK_TIMEOUTMSK) : 0) |
+		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
+		DOEPMSK_SETUPMSK,
+		hsotg->regs + DOEPMSK);
+
+	writel(0, hsotg->regs + DAINTMSK);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
+
+	/* enable in and out endpoint interrupts */
+	s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT);
+
+	/*
+	 * Enable the RXFIFO when in slave mode, as this is how we collect
+	 * the data. In DMA mode, we get events from the FIFO but also
+	 * things we cannot process, so do not use it.
+	 */
+	if (!using_dma(hsotg))
+		s3c_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL);
+
+	/* Enable interrupts for EP0 in and out */
+	s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+	s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+	if (!is_usb_reset) {
+		__orr32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
+		udelay(10);  /* see openiboot */
+		__bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
+	}
+
+	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL));
+
+	/*
+	 * DxEPCTL_USBActEp says RO in manual, but seems to be set by
+	 * writing to the EPCTL register..
+	 */
+
+	/* set to read 1 8byte packet */
+	writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
+	       DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0);
+
+	writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
+	       DXEPCTL_CNAK | DXEPCTL_EPENA |
+	       DXEPCTL_USBACTEP,
+	       hsotg->regs + DOEPCTL0);
+
+	/* enable, but don't activate EP0in */
+	writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
+	       DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
+
+	s3c_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
+
+	/* clear global NAKs */
+	val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
+	if (!is_usb_reset)
+		val |= DCTL_SFTDISCON;
+	__orr32(hsotg->regs + DCTL, val);
+
+	/* must be at-least 3ms to allow bus to see disconnect */
+	mdelay(3);
+
+	hsotg->last_rst = jiffies;
+}
+
+static void s3c_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
+{
+	/* set the soft-disconnect bit */
+	__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
+}
+
+void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg)
+{
+	/* remove the soft-disconnect and let's go */
+	__bic32(hsotg->regs + DCTL, DCTL_SFTDISCON);
+}
+
+/**
+ * s3c_hsotg_irq - handle device interrupt
+ * @irq: The IRQ number triggered
+ * @pw: The pw value when registered the handler.
+ */
+static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
+{
+	struct dwc2_hsotg *hsotg = pw;
+	int retry_count = 8;
+	u32 gintsts;
+	u32 gintmsk;
+
+	spin_lock(&hsotg->lock);
+irq_retry:
+	gintsts = readl(hsotg->regs + GINTSTS);
+	gintmsk = readl(hsotg->regs + GINTMSK);
+
+	dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
+		__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
+
+	gintsts &= gintmsk;
+
+	if (gintsts & GINTSTS_ENUMDONE) {
+		writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
+
+		s3c_hsotg_irq_enumdone(hsotg);
+	}
+
+	if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
+		u32 daint = readl(hsotg->regs + DAINT);
+		u32 daintmsk = readl(hsotg->regs + DAINTMSK);
+		u32 daint_out, daint_in;
+		int ep;
+
+		daint &= daintmsk;
+		daint_out = daint >> DAINT_OUTEP_SHIFT;
+		daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT);
+
+		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
+
+		for (ep = 0; ep < hsotg->num_of_eps && daint_out;
+						ep++, daint_out >>= 1) {
+			if (daint_out & 1)
+				s3c_hsotg_epint(hsotg, ep, 0);
+		}
+
+		for (ep = 0; ep < hsotg->num_of_eps  && daint_in;
+						ep++, daint_in >>= 1) {
+			if (daint_in & 1)
+				s3c_hsotg_epint(hsotg, ep, 1);
+		}
+	}
+
+	if (gintsts & GINTSTS_USBRST) {
+
+		u32 usb_status = readl(hsotg->regs + GOTGCTL);
+
+		dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
+		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
+			readl(hsotg->regs + GNPTXSTS));
+
+		writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
+
+		/* Report disconnection if it is not already done. */
+		s3c_hsotg_disconnect(hsotg);
+
+		if (usb_status & GOTGCTL_BSESVLD) {
+			if (time_after(jiffies, hsotg->last_rst +
+				       msecs_to_jiffies(200))) {
+
+				kill_all_requests(hsotg, hsotg->eps_out[0],
+							  -ECONNRESET);
+
+				s3c_hsotg_core_init_disconnected(hsotg, true);
+			}
+		}
+	}
+
+	/* check both FIFOs */
+
+	if (gintsts & GINTSTS_NPTXFEMP) {
+		dev_dbg(hsotg->dev, "NPTxFEmp\n");
+
+		/*
+		 * Disable the interrupt to stop it happening again
+		 * unless one of these endpoint routines decides that
+		 * it needs re-enabling
+		 */
+
+		s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP);
+		s3c_hsotg_irq_fifoempty(hsotg, false);
+	}
+
+	if (gintsts & GINTSTS_PTXFEMP) {
+		dev_dbg(hsotg->dev, "PTxFEmp\n");
+
+		/* See note in GINTSTS_NPTxFEmp */
+
+		s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP);
+		s3c_hsotg_irq_fifoempty(hsotg, true);
+	}
+
+	if (gintsts & GINTSTS_RXFLVL) {
+		/*
+		 * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+		 * we need to retry s3c_hsotg_handle_rx if this is still
+		 * set.
+		 */
+
+		s3c_hsotg_handle_rx(hsotg);
+	}
+
+	if (gintsts & GINTSTS_ERLYSUSP) {
+		dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
+		writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
+	}
+
+	/*
+	 * these next two seem to crop-up occasionally causing the core
+	 * to shutdown the USB transfer, so try clearing them and logging
+	 * the occurrence.
+	 */
+
+	if (gintsts & GINTSTS_GOUTNAKEFF) {
+		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+
+		writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
+
+		s3c_hsotg_dump(hsotg);
+	}
+
+	if (gintsts & GINTSTS_GINNAKEFF) {
+		dev_info(hsotg->dev, "GINNakEff triggered\n");
+
+		writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
+
+		s3c_hsotg_dump(hsotg);
+	}
+
+	/*
+	 * if we've had fifo events, we should try and go around the
+	 * loop again to see if there's any point in returning yet.
+	 */
+
+	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
+			goto irq_retry;
+
+	spin_unlock(&hsotg->lock);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * s3c_hsotg_ep_enable - enable the given endpoint
+ * @ep: The USB endpint to configure
+ * @desc: The USB endpoint descriptor to configure with.
+ *
+ * This is called from the USB gadget code's usb_ep_enable().
+ */
+static int s3c_hsotg_ep_enable(struct usb_ep *ep,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	unsigned int index = hs_ep->index;
+	u32 epctrl_reg;
+	u32 epctrl;
+	u32 mps;
+	unsigned int dir_in;
+	unsigned int i, val, size;
+	int ret = 0;
+
+	dev_dbg(hsotg->dev,
+		"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
+		__func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
+		desc->wMaxPacketSize, desc->bInterval);
+
+	/* not to be called for EP0 */
+	WARN_ON(index == 0);
+
+	dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	if (dir_in != hs_ep->dir_in) {
+		dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
+		return -EINVAL;
+	}
+
+	mps = usb_endpoint_maxp(desc);
+
+	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
+
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	epctrl = readl(hsotg->regs + epctrl_reg);
+
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
+		__func__, epctrl, epctrl_reg);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK);
+	epctrl |= DXEPCTL_MPS(mps);
+
+	/*
+	 * mark the endpoint as active, otherwise the core may ignore
+	 * transactions entirely for this endpoint
+	 */
+	epctrl |= DXEPCTL_USBACTEP;
+
+	/*
+	 * set the NAK status on the endpoint, otherwise we might try and
+	 * do something with data that we've yet got a request to process
+	 * since the RXFIFO will take data for an endpoint even if the
+	 * size register hasn't been set.
+	 */
+
+	epctrl |= DXEPCTL_SNAK;
+
+	/* update the endpoint state */
+	s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, dir_in);
+
+	/* default, set to non-periodic */
+	hs_ep->isochronous = 0;
+	hs_ep->periodic = 0;
+	hs_ep->halted = 0;
+	hs_ep->interval = desc->bInterval;
+
+	if (hs_ep->interval > 1 && hs_ep->mc > 1)
+		dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_ISOC:
+		epctrl |= DXEPCTL_EPTYPE_ISO;
+		epctrl |= DXEPCTL_SETEVENFR;
+		hs_ep->isochronous = 1;
+		if (dir_in)
+			hs_ep->periodic = 1;
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		epctrl |= DXEPCTL_EPTYPE_BULK;
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (dir_in)
+			hs_ep->periodic = 1;
+
+		epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
+		break;
+
+	case USB_ENDPOINT_XFER_CONTROL:
+		epctrl |= DXEPCTL_EPTYPE_CONTROL;
+		break;
+	}
+
+	/* If fifo is already allocated for this ep */
+	if (hs_ep->fifo_index) {
+		size =  hs_ep->ep.maxpacket * hs_ep->mc;
+		/* If bigger fifo is required deallocate current one */
+		if (size > hs_ep->fifo_size) {
+			hsotg->fifo_map &= ~(1 << hs_ep->fifo_index);
+			hs_ep->fifo_index = 0;
+			hs_ep->fifo_size = 0;
+		}
+	}
+
+	/*
+	 * if the hardware has dedicated fifos, we must give each IN EP
+	 * a unique tx-fifo even if it is non-periodic.
+	 */
+	if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) {
+		u32 fifo_index = 0;
+		u32 fifo_size = UINT_MAX;
+		size = hs_ep->ep.maxpacket*hs_ep->mc;
+		for (i = 1; i < hsotg->num_of_eps; ++i) {
+			if (hsotg->fifo_map & (1<<i))
+				continue;
+			val = readl(hsotg->regs + DPTXFSIZN(i));
+			val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
+			if (val < size)
+				continue;
+			/* Search for smallest acceptable fifo */
+			if (val < fifo_size) {
+				fifo_size = val;
+				fifo_index = i;
+			}
+		}
+		if (!fifo_index) {
+			dev_err(hsotg->dev,
+				"%s: No suitable fifo found\n", __func__);
+			ret = -ENOMEM;
+			goto error;
+		}
+		hsotg->fifo_map |= 1 << fifo_index;
+		epctrl |= DXEPCTL_TXFNUM(fifo_index);
+		hs_ep->fifo_index = fifo_index;
+		hs_ep->fifo_size = fifo_size;
+	}
+
+	/* for non control endpoints, set PID to D0 */
+	if (index)
+		epctrl |= DXEPCTL_SETD0PID;
+
+	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
+		__func__, epctrl);
+
+	writel(epctrl, hsotg->regs + epctrl_reg);
+	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
+		__func__, readl(hsotg->regs + epctrl_reg));
+
+	/* enable the endpoint interrupt */
+	s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+
+error:
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
+/**
+ * s3c_hsotg_ep_disable - disable given endpoint
+ * @ep: The endpoint to disable.
+ */
+static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	int index = hs_ep->index;
+	unsigned long flags;
+	u32 epctrl_reg;
+	u32 ctrl;
+
+	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+
+	if (ep == &hsotg->eps_out[0]->ep) {
+		dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
+		return -EINVAL;
+	}
+
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
+	hs_ep->fifo_index = 0;
+	hs_ep->fifo_size = 0;
+
+	ctrl = readl(hsotg->regs + epctrl_reg);
+	ctrl &= ~DXEPCTL_EPENA;
+	ctrl &= ~DXEPCTL_USBACTEP;
+	ctrl |= DXEPCTL_SNAK;
+
+	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
+	writel(ctrl, hsotg->regs + epctrl_reg);
+
+	/* disable endpoint interrupts */
+	s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
+
+	/* terminate all requests with shutdown */
+	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return 0;
+}
+
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+	return s3c_hsotg_ep_disable_force(ep, false);
+}
+/**
+ * on_list - check request is on the given endpoint
+ * @ep: The endpoint to check.
+ * @test: The request to test if it is on the endpoint.
+ */
+static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
+{
+	struct s3c_hsotg_req *req, *treq;
+
+	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
+		if (req == test)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * s3c_hsotg_ep_dequeue - dequeue given endpoint
+ * @ep: The endpoint to dequeue.
+ * @req: The request to be removed from a queue.
+ */
+static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct s3c_hsotg_req *hs_req = our_req(req);
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags;
+
+	dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+
+	spin_lock_irqsave(&hs->lock, flags);
+
+	if (!on_list(hs_ep, hs_req)) {
+		spin_unlock_irqrestore(&hs->lock, flags);
+		return -EINVAL;
+	}
+
+	s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_ep_sethalt - set halt on a given endpoint
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	int index = hs_ep->index;
+	u32 epreg;
+	u32 epctl;
+	u32 xfertype;
+
+	dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
+
+	if (index == 0) {
+		if (value)
+			s3c_hsotg_stall_ep0(hs);
+		else
+			dev_warn(hs->dev,
+				 "%s: can't clear halt on ep0\n", __func__);
+		return 0;
+	}
+
+	if (hs_ep->dir_in) {
+		epreg = DIEPCTL(index);
+		epctl = readl(hs->regs + epreg);
+
+		if (value) {
+			epctl |= DXEPCTL_STALL + DXEPCTL_SNAK;
+			if (epctl & DXEPCTL_EPENA)
+				epctl |= DXEPCTL_EPDIS;
+		} else {
+			epctl &= ~DXEPCTL_STALL;
+			xfertype = epctl & DXEPCTL_EPTYPE_MASK;
+			if (xfertype == DXEPCTL_EPTYPE_BULK ||
+				xfertype == DXEPCTL_EPTYPE_INTERRUPT)
+					epctl |= DXEPCTL_SETD0PID;
+		}
+		writel(epctl, hs->regs + epreg);
+	} else {
+
+		epreg = DOEPCTL(index);
+		epctl = readl(hs->regs + epreg);
+
+		if (value)
+			epctl |= DXEPCTL_STALL;
+		else {
+			epctl &= ~DXEPCTL_STALL;
+			xfertype = epctl & DXEPCTL_EPTYPE_MASK;
+			if (xfertype == DXEPCTL_EPTYPE_BULK ||
+				xfertype == DXEPCTL_EPTYPE_INTERRUPT)
+					epctl |= DXEPCTL_SETD0PID;
+		}
+		writel(epctl, hs->regs + epreg);
+	}
+
+	hs_ep->halted = value;
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
+static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
+{
+	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hs = hs_ep->parent;
+	unsigned long flags = 0;
+	int ret = 0;
+
+	spin_lock_irqsave(&hs->lock, flags);
+	ret = s3c_hsotg_ep_sethalt(ep, value);
+	spin_unlock_irqrestore(&hs->lock, flags);
+
+	return ret;
+}
+
+static struct usb_ep_ops s3c_hsotg_ep_ops = {
+	.enable		= s3c_hsotg_ep_enable,
+	.disable	= s3c_hsotg_ep_disable,
+	.alloc_request	= s3c_hsotg_ep_alloc_request,
+	.free_request	= s3c_hsotg_ep_free_request,
+	.queue		= s3c_hsotg_ep_queue_lock,
+	.dequeue	= s3c_hsotg_ep_dequeue,
+	.set_halt	= s3c_hsotg_ep_sethalt_lock,
+	/* note, don't believe we have any call for the fifo routines */
+};
+
+/**
+ * s3c_hsotg_phy_enable - enable platform phy dev
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB code
+ */
+static void s3c_hsotg_phy_enable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+
+	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
+
+	if (hsotg->uphy)
+		usb_phy_init(hsotg->uphy);
+	else if (hsotg->plat && hsotg->plat->phy_init)
+		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+	else {
+		phy_init(hsotg->phy);
+		phy_power_on(hsotg->phy);
+	}
+}
+
+/**
+ * s3c_hsotg_phy_disable - disable platform phy dev
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB code
+ */
+static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
+
+	if (hsotg->uphy)
+		usb_phy_shutdown(hsotg->uphy);
+	else if (hsotg->plat && hsotg->plat->phy_exit)
+		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+	else {
+		phy_power_off(hsotg->phy);
+		phy_exit(hsotg->phy);
+	}
+}
+
+/**
+ * s3c_hsotg_init - initalize the usb core
+ * @hsotg: The driver state
+ */
+static void s3c_hsotg_init(struct dwc2_hsotg *hsotg)
+{
+	u32 trdtim;
+	/* unmask subset of endpoint interrupts */
+
+	writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
+		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK,
+		hsotg->regs + DIEPMSK);
+
+	writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
+		DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK,
+		hsotg->regs + DOEPMSK);
+
+	writel(0, hsotg->regs + DAINTMSK);
+
+	/* Be in disconnected state until gadget is registered */
+	__orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
+
+	/* setup fifos */
+
+	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		readl(hsotg->regs + GRXFSIZ),
+		readl(hsotg->regs + GNPTXFSIZ));
+
+	s3c_hsotg_init_fifo(hsotg);
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
+	writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
+		(trdtim << GUSBCFG_USBTRDTIM_SHIFT),
+		hsotg->regs + GUSBCFG);
+
+	if (using_dma(hsotg))
+		__orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
+}
+
+/**
+ * s3c_hsotg_udc_start - prepare the udc for work
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Perform initialization to prepare udc device and driver
+ * to work.
+ */
+static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
+			   struct usb_gadget_driver *driver)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+	int ret;
+
+	if (!hsotg) {
+		pr_err("%s: called with no device\n", __func__);
+		return -ENODEV;
+	}
+
+	if (!driver) {
+		dev_err(hsotg->dev, "%s: no driver\n", __func__);
+		return -EINVAL;
+	}
+
+	if (driver->max_speed < USB_SPEED_FULL)
+		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
+
+	if (!driver->setup) {
+		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&hsotg->init_mutex);
+	WARN_ON(hsotg->driver);
+
+	driver->driver.bus = NULL;
+	hsotg->driver = driver;
+	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+
+	clk_enable(hsotg->clk);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret) {
+		dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
+		goto err;
+	}
+
+	s3c_hsotg_phy_enable(hsotg);
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	s3c_hsotg_init(hsotg);
+	s3c_hsotg_core_init_disconnected(hsotg, false);
+	hsotg->enabled = 0;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
+
+	mutex_unlock(&hsotg->init_mutex);
+
+	return 0;
+
+err:
+	mutex_unlock(&hsotg->init_mutex);
+	hsotg->driver = NULL;
+	return ret;
+}
+
+/**
+ * s3c_hsotg_udc_stop - stop the udc
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Stop udc hw block and stay tunned for future transmissions
+ */
+static int s3c_hsotg_udc_stop(struct usb_gadget *gadget)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
+	int ep;
+
+	if (!hsotg)
+		return -ENODEV;
+
+	mutex_lock(&hsotg->init_mutex);
+
+	/* all endpoints should be shutdown */
+	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
+		if (hsotg->eps_in[ep])
+			s3c_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+		if (hsotg->eps_out[ep])
+			s3c_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+	}
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	hsotg->driver = NULL;
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	hsotg->enabled = 0;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	if (!IS_ERR_OR_NULL(hsotg->uphy))
+		otg_set_peripheral(hsotg->uphy->otg, NULL);
+	s3c_hsotg_phy_disable(hsotg);
+
+	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+
+	clk_disable(hsotg->clk);
+
+	mutex_unlock(&hsotg->init_mutex);
+
+	return 0;
+}
+
+/**
+ * s3c_hsotg_gadget_getframe - read the frame number
+ * @gadget: The usb gadget state
+ *
+ * Read the {micro} frame number
+ */
+static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
+{
+	return s3c_hsotg_read_frameno(to_hsotg(gadget));
+}
+
+/**
+ * s3c_hsotg_pullup - connect/disconnect the USB PHY
+ * @gadget: The usb gadget state
+ * @is_on: Current state of the USB PHY
+ *
+ * Connect/Disconnect the USB PHY pullup
+ */
+static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags = 0;
+
+	dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on);
+
+	mutex_lock(&hsotg->init_mutex);
+	spin_lock_irqsave(&hsotg->lock, flags);
+	if (is_on) {
+		clk_enable(hsotg->clk);
+		hsotg->enabled = 1;
+		s3c_hsotg_core_init_disconnected(hsotg, false);
+		s3c_hsotg_core_connect(hsotg);
+	} else {
+		s3c_hsotg_core_disconnect(hsotg);
+		s3c_hsotg_disconnect(hsotg);
+		hsotg->enabled = 0;
+		clk_disable(hsotg->clk);
+	}
+
+	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	mutex_unlock(&hsotg->init_mutex);
+
+	return 0;
+}
+
+static int s3c_hsotg_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+	unsigned long flags;
+
+	dev_dbg(hsotg->dev, "%s: is_active: %d\n", __func__, is_active);
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	if (is_active) {
+		/* Kill any ep0 requests as controller will be reinitialized */
+		kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
+		s3c_hsotg_core_init_disconnected(hsotg, false);
+		if (hsotg->enabled)
+			s3c_hsotg_core_connect(hsotg);
+	} else {
+		s3c_hsotg_core_disconnect(hsotg);
+		s3c_hsotg_disconnect(hsotg);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsotg_vbus_draw - report bMaxPower field
+ * @gadget: The usb gadget state
+ * @mA: Amount of current
+ *
+ * Report how much power the device may consume to the phy.
+ */
+static int s3c_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct dwc2_hsotg *hsotg = to_hsotg(gadget);
+
+	if (IS_ERR_OR_NULL(hsotg->uphy))
+		return -ENOTSUPP;
+	return usb_phy_set_power(hsotg->uphy, mA);
+}
+
+static const struct usb_gadget_ops s3c_hsotg_gadget_ops = {
+	.get_frame	= s3c_hsotg_gadget_getframe,
+	.udc_start		= s3c_hsotg_udc_start,
+	.udc_stop		= s3c_hsotg_udc_stop,
+	.pullup                 = s3c_hsotg_pullup,
+	.vbus_session		= s3c_hsotg_vbus_session,
+	.vbus_draw		= s3c_hsotg_vbus_draw,
+};
+
+/**
+ * s3c_hsotg_initep - initialise a single endpoint
+ * @hsotg: The device state.
+ * @hs_ep: The endpoint to be initialised.
+ * @epnum: The endpoint number
+ *
+ * Initialise the given endpoint (as part of the probe and device state
+ * creation) to give to the gadget driver. Setup the endpoint name, any
+ * direction information and other state that may be required.
+ */
+static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg,
+				       struct s3c_hsotg_ep *hs_ep,
+				       int epnum,
+				       bool dir_in)
+{
+	char *dir;
+
+	if (epnum == 0)
+		dir = "";
+	else if (dir_in)
+		dir = "in";
+	else
+		dir = "out";
+
+	hs_ep->dir_in = dir_in;
+	hs_ep->index = epnum;
+
+	snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
+
+	INIT_LIST_HEAD(&hs_ep->queue);
+	INIT_LIST_HEAD(&hs_ep->ep.ep_list);
+
+	/* add to the list of endpoints known by the gadget driver */
+	if (epnum)
+		list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
+
+	hs_ep->parent = hsotg;
+	hs_ep->ep.name = hs_ep->name;
+	usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
+	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
+
+	/*
+	 * if we're using dma, we need to set the next-endpoint pointer
+	 * to be something valid.
+	 */
+
+	if (using_dma(hsotg)) {
+		u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15);
+		if (dir_in)
+			writel(next, hsotg->regs + DIEPCTL(epnum));
+		else
+			writel(next, hsotg->regs + DOEPCTL(epnum));
+	}
+}
+
+/**
+ * s3c_hsotg_hw_cfg - read HW configuration registers
+ * @param: The device state
+ *
+ * Read the USB core HW configuration registers
+ */
+static int s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
+{
+	u32 cfg;
+	u32 ep_type;
+	u32 i;
+
+	/* check hardware configuration */
+
+	cfg = readl(hsotg->regs + GHWCFG2);
+	hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF;
+	/* Add ep0 */
+	hsotg->num_of_eps++;
+
+	hsotg->eps_in[0] = devm_kzalloc(hsotg->dev, sizeof(struct s3c_hsotg_ep),
+								GFP_KERNEL);
+	if (!hsotg->eps_in[0])
+		return -ENOMEM;
+	/* Same s3c_hsotg_ep is used in both directions for ep0 */
+	hsotg->eps_out[0] = hsotg->eps_in[0];
+
+	cfg = readl(hsotg->regs + GHWCFG1);
+	for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
+		ep_type = cfg & 3;
+		/* Direction in or both */
+		if (!(ep_type & 2)) {
+			hsotg->eps_in[i] = devm_kzalloc(hsotg->dev,
+				sizeof(struct s3c_hsotg_ep), GFP_KERNEL);
+			if (!hsotg->eps_in[i])
+				return -ENOMEM;
+		}
+		/* Direction out or both */
+		if (!(ep_type & 1)) {
+			hsotg->eps_out[i] = devm_kzalloc(hsotg->dev,
+				sizeof(struct s3c_hsotg_ep), GFP_KERNEL);
+			if (!hsotg->eps_out[i])
+				return -ENOMEM;
+		}
+	}
+
+	cfg = readl(hsotg->regs + GHWCFG3);
+	hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT);
+
+	cfg = readl(hsotg->regs + GHWCFG4);
+	hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1;
+
+	dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
+		 hsotg->num_of_eps,
+		 hsotg->dedicated_fifos ? "dedicated" : "shared",
+		 hsotg->fifo_mem);
+	return 0;
+}
+
+/**
+ * s3c_hsotg_dump - dump state of the udc
+ * @param: The device state
+ */
+static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg)
+{
+#ifdef DEBUG
+	struct device *dev = hsotg->dev;
+	void __iomem *regs = hsotg->regs;
+	u32 val;
+	int idx;
+
+	dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
+		 readl(regs + DCFG), readl(regs + DCTL),
+		 readl(regs + DIEPMSK));
+
+	dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n",
+		 readl(regs + GAHBCFG), readl(regs + GHWCFG1));
+
+	dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		 readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ));
+
+	/* show periodic fifo settings */
+
+	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+		val = readl(regs + DPTXFSIZN(idx));
+		dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
+			 val >> FIFOSIZE_DEPTH_SHIFT,
+			 val & FIFOSIZE_STARTADDR_MASK);
+	}
+
+	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+		dev_info(dev,
+			 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
+			 readl(regs + DIEPCTL(idx)),
+			 readl(regs + DIEPTSIZ(idx)),
+			 readl(regs + DIEPDMA(idx)));
+
+		val = readl(regs + DOEPCTL(idx));
+		dev_info(dev,
+			 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
+			 idx, readl(regs + DOEPCTL(idx)),
+			 readl(regs + DOEPTSIZ(idx)),
+			 readl(regs + DOEPDMA(idx)));
+
+	}
+
+	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
+		 readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE));
+#endif
+}
+
+/**
+ * testmode_write - debugfs: change usb test mode
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry modify the current usb test mode.
+ */
+static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
+		count, loff_t *ppos)
+{
+	struct seq_file		*s = file->private_data;
+	struct dwc2_hsotg	*hsotg = s->private;
+	unsigned long		flags;
+	u32			testmode = 0;
+	char			buf[32];
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "test_j", 6))
+		testmode = TEST_J;
+	else if (!strncmp(buf, "test_k", 6))
+		testmode = TEST_K;
+	else if (!strncmp(buf, "test_se0_nak", 12))
+		testmode = TEST_SE0_NAK;
+	else if (!strncmp(buf, "test_packet", 11))
+		testmode = TEST_PACKET;
+	else if (!strncmp(buf, "test_force_enable", 17))
+		testmode = TEST_FORCE_EN;
+	else
+		testmode = 0;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	s3c_hsotg_set_test_mode(hsotg, testmode);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return count;
+}
+
+/**
+ * testmode_show - debugfs: show usb test mode state
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows which usb test mode is currently enabled.
+ */
+static int testmode_show(struct seq_file *s, void *unused)
+{
+	struct dwc2_hsotg *hsotg = s->private;
+	unsigned long flags;
+	int dctl;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	dctl = readl(hsotg->regs + DCTL);
+	dctl &= DCTL_TSTCTL_MASK;
+	dctl >>= DCTL_TSTCTL_SHIFT;
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	switch (dctl) {
+	case 0:
+		seq_puts(s, "no test\n");
+		break;
+	case TEST_J:
+		seq_puts(s, "test_j\n");
+		break;
+	case TEST_K:
+		seq_puts(s, "test_k\n");
+		break;
+	case TEST_SE0_NAK:
+		seq_puts(s, "test_se0_nak\n");
+		break;
+	case TEST_PACKET:
+		seq_puts(s, "test_packet\n");
+		break;
+	case TEST_FORCE_EN:
+		seq_puts(s, "test_force_enable\n");
+		break;
+	default:
+		seq_printf(s, "UNKNOWN %d\n", dctl);
+	}
+
+	return 0;
+}
+
+static int testmode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, testmode_show, inode->i_private);
+}
+
+static const struct file_operations testmode_fops = {
+	.owner		= THIS_MODULE,
+	.open		= testmode_open,
+	.write		= testmode_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	void __iomem *regs = hsotg->regs;
+	int idx;
+
+	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+		 readl(regs + DCFG),
+		 readl(regs + DCTL),
+		 readl(regs + DSTS));
+
+	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+		   readl(regs + DIEPMSK), readl(regs + DOEPMSK));
+
+	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+		   readl(regs + GINTMSK),
+		   readl(regs + GINTSTS));
+
+	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+		   readl(regs + DAINTMSK),
+		   readl(regs + DAINT));
+
+	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+		   readl(regs + GNPTXSTS),
+		   readl(regs + GRXSTSR));
+
+	seq_puts(seq, "\nEndpoint status:\n");
+
+	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+		u32 in, out;
+
+		in = readl(regs + DIEPCTL(idx));
+		out = readl(regs + DOEPCTL(idx));
+
+		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+			   idx, in, out);
+
+		in = readl(regs + DIEPTSIZ(idx));
+		out = readl(regs + DOEPTSIZ(idx));
+
+		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+			   in, out);
+
+		seq_puts(seq, "\n");
+	}
+
+	return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+	.owner		= THIS_MODULE,
+	.open		= state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+ */
+static int fifo_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	void __iomem *regs = hsotg->regs;
+	u32 val;
+	int idx;
+
+	seq_puts(seq, "Non-periodic FIFOs:\n");
+	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
+
+	val = readl(regs + GNPTXFSIZ);
+	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+		   val >> FIFOSIZE_DEPTH_SHIFT,
+		   val & FIFOSIZE_DEPTH_MASK);
+
+	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
+
+	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+		val = readl(regs + DPTXFSIZN(idx));
+
+		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+			   val >> FIFOSIZE_DEPTH_SHIFT,
+			   val & FIFOSIZE_STARTADDR_MASK);
+	}
+
+	return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+	.owner		= THIS_MODULE,
+	.open		= fifo_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+
+static const char *decode_direction(int is_in)
+{
+	return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+ */
+static int ep_show(struct seq_file *seq, void *v)
+{
+	struct s3c_hsotg_ep *ep = seq->private;
+	struct dwc2_hsotg *hsotg = ep->parent;
+	struct s3c_hsotg_req *req;
+	void __iomem *regs = hsotg->regs;
+	int index = ep->index;
+	int show_limit = 15;
+	unsigned long flags;
+
+	seq_printf(seq, "Endpoint index %d, named %s,  dir %s:\n",
+		   ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+	/* first show the register state */
+
+	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+		   readl(regs + DIEPCTL(index)),
+		   readl(regs + DOEPCTL(index)));
+
+	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+		   readl(regs + DIEPDMA(index)),
+		   readl(regs + DOEPDMA(index)));
+
+	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+		   readl(regs + DIEPINT(index)),
+		   readl(regs + DOEPINT(index)));
+
+	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+		   readl(regs + DIEPTSIZ(index)),
+		   readl(regs + DOEPTSIZ(index)));
+
+	seq_puts(seq, "\n");
+	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+	seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+	seq_printf(seq, "request list (%p,%p):\n",
+		   ep->queue.next, ep->queue.prev);
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (--show_limit < 0) {
+			seq_puts(seq, "not showing more requests...\n");
+			break;
+		}
+
+		seq_printf(seq, "%c req %p: %d bytes @%p, ",
+			   req == ep->req ? '*' : ' ',
+			   req, req->req.length, req->req.buf);
+		seq_printf(seq, "%d done, res %d\n",
+			   req->req.actual, req->req.status);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+
+	return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ep_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+ */
+static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+{
+	struct dentry *root;
+	unsigned epidx;
+
+	root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+	hsotg->debug_root = root;
+	if (IS_ERR(root)) {
+		dev_err(hsotg->dev, "cannot create debug root\n");
+		return;
+	}
+
+	/* create general state file */
+
+	hsotg->debug_file = debugfs_create_file("state", S_IRUGO, root,
+						hsotg, &state_fops);
+
+	if (IS_ERR(hsotg->debug_file))
+		dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+	hsotg->debug_testmode = debugfs_create_file("testmode",
+					S_IRUGO | S_IWUSR, root,
+					hsotg, &testmode_fops);
+
+	if (IS_ERR(hsotg->debug_testmode))
+		dev_err(hsotg->dev, "%s: failed to create testmode\n",
+				__func__);
+
+	hsotg->debug_fifo = debugfs_create_file("fifo", S_IRUGO, root,
+						hsotg, &fifo_fops);
+
+	if (IS_ERR(hsotg->debug_fifo))
+		dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+	/* Create one file for each out endpoint */
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+		struct s3c_hsotg_ep *ep;
+
+		ep = hsotg->eps_out[epidx];
+		if (ep) {
+			ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
+							  root, ep, &ep_fops);
+
+			if (IS_ERR(ep->debugfs))
+				dev_err(hsotg->dev, "failed to create %s debug file\n",
+					ep->name);
+		}
+	}
+	/* Create one file for each in endpoint. EP0 is handled with out eps */
+	for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
+		struct s3c_hsotg_ep *ep;
+
+		ep = hsotg->eps_in[epidx];
+		if (ep) {
+			ep->debugfs = debugfs_create_file(ep->name, S_IRUGO,
+							  root, ep, &ep_fops);
+
+			if (IS_ERR(ep->debugfs))
+				dev_err(hsotg->dev, "failed to create %s debug file\n",
+					ep->name);
+		}
+	}
+}
+
+/**
+ * s3c_hsotg_delete_debug - cleanup debugfs entries
+ * @hsotg: The driver state
+ *
+ * Cleanup (remove) the debugfs files for use on module exit.
+ */
+static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg)
+{
+	unsigned epidx;
+
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+		if (hsotg->eps_in[epidx])
+			debugfs_remove(hsotg->eps_in[epidx]->debugfs);
+		if (hsotg->eps_out[epidx])
+			debugfs_remove(hsotg->eps_out[epidx]->debugfs);
+	}
+
+	debugfs_remove(hsotg->debug_file);
+	debugfs_remove(hsotg->debug_testmode);
+	debugfs_remove(hsotg->debug_fifo);
+	debugfs_remove(hsotg->debug_root);
+}
+
+#ifdef CONFIG_OF
+static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg)
+{
+	struct device_node *np = hsotg->dev->of_node;
+	u32 len = 0;
+	u32 i = 0;
+
+	/* Enable dma if requested in device tree */
+	hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
+
+	/*
+	* Register TX periodic fifo size per endpoint.
+	* EP0 is excluded since it has no fifo configuration.
+	*/
+	if (!of_find_property(np, "g-tx-fifo-size", &len))
+		goto rx_fifo;
+
+	len /= sizeof(u32);
+
+	/* Read tx fifo sizes other than ep0 */
+	if (of_property_read_u32_array(np, "g-tx-fifo-size",
+						&hsotg->g_tx_fifo_sz[1], len))
+		goto rx_fifo;
+
+	/* Add ep0 */
+	len++;
+
+	/* Make remaining TX fifos unavailable */
+	if (len < MAX_EPS_CHANNELS) {
+		for (i = len; i < MAX_EPS_CHANNELS; i++)
+			hsotg->g_tx_fifo_sz[i] = 0;
+	}
+
+rx_fifo:
+	/* Register RX fifo size */
+	of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
+
+	/* Register NPTX fifo size */
+	of_property_read_u32(np, "g-np-tx-fifo-size",
+						&hsotg->g_np_g_tx_fifo_sz);
+}
+#else
+static inline void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) { }
+#endif
+
+/**
+ * dwc2_gadget_init - init function for gadget
+ * @dwc2: The data structure for the DWC2 driver.
+ * @irq: The IRQ number for the controller.
+ */
+int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
+{
+	struct device *dev = hsotg->dev;
+	struct s3c_hsotg_plat *plat = dev->platform_data;
+	int epnum;
+	int ret;
+	int i;
+	u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
+
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIF16;
+
+	s3c_hsotg_of_probe(hsotg);
+
+	/* Initialize to legacy fifo configuration values */
+	hsotg->g_rx_fifo_sz = 2048;
+	hsotg->g_np_g_tx_fifo_sz = 1024;
+	memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
+	/* Device tree specific probe */
+	s3c_hsotg_of_probe(hsotg);
+	/* Dump fifo information */
+	dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
+						hsotg->g_np_g_tx_fifo_sz);
+	dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
+	for (i = 0; i < MAX_EPS_CHANNELS; i++)
+		dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
+						hsotg->g_tx_fifo_sz[i]);
+	/*
+	 * If platform probe couldn't find a generic PHY or an old style
+	 * USB PHY, fall back to pdata
+	 */
+	if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
+		plat = dev_get_platdata(dev);
+		if (!plat) {
+			dev_err(dev,
+			"no platform data or transceiver defined\n");
+			return -EPROBE_DEFER;
+		}
+		hsotg->plat = plat;
+	} else if (hsotg->phy) {
+		/*
+		 * If using the generic PHY framework, check if the PHY bus
+		 * width is 8-bit and set the phyif appropriately.
+		 */
+		if (phy_get_bus_width(hsotg->phy) == 8)
+			hsotg->phyif = GUSBCFG_PHYIF8;
+	}
+
+	hsotg->clk = devm_clk_get(dev, "otg");
+	if (IS_ERR(hsotg->clk)) {
+		hsotg->clk = NULL;
+		dev_dbg(dev, "cannot get otg clock\n");
+	}
+
+	hsotg->gadget.max_speed = USB_SPEED_HIGH;
+	hsotg->gadget.ops = &s3c_hsotg_gadget_ops;
+	hsotg->gadget.name = dev_name(dev);
+
+	/* reset the system */
+
+	ret = clk_prepare_enable(hsotg->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable otg clk\n");
+		goto err_clk;
+	}
+
+
+	/* regulators */
+
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = s3c_hsotg_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
+				 hsotg->supplies);
+	if (ret) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_clk;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+
+	if (ret) {
+		dev_err(dev, "failed to enable supplies: %d\n", ret);
+		goto err_clk;
+	}
+
+	/* usb phy enable */
+	s3c_hsotg_phy_enable(hsotg);
+
+	/*
+	 * Force Device mode before initialization.
+	 * This allows correctly configuring fifo for device mode.
+	 */
+	__bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEHOSTMODE);
+	__orr32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
+
+	/*
+	 * According to Synopsys databook, this sleep is needed for the force
+	 * device mode to take effect.
+	 */
+	msleep(25);
+
+	s3c_hsotg_corereset(hsotg);
+	ret = s3c_hsotg_hw_cfg(hsotg);
+	if (ret) {
+		dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret);
+		goto err_clk;
+	}
+
+	s3c_hsotg_init(hsotg);
+
+	/* Switch back to default configuration */
+	__bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
+
+	hsotg->ctrl_buff = devm_kzalloc(hsotg->dev,
+			DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
+	if (!hsotg->ctrl_buff) {
+		dev_err(dev, "failed to allocate ctrl request buff\n");
+		ret = -ENOMEM;
+		goto err_supplies;
+	}
+
+	hsotg->ep0_buff = devm_kzalloc(hsotg->dev,
+			DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
+	if (!hsotg->ep0_buff) {
+		dev_err(dev, "failed to allocate ctrl reply buff\n");
+		ret = -ENOMEM;
+		goto err_supplies;
+	}
+
+	ret = devm_request_irq(hsotg->dev, irq, s3c_hsotg_irq, IRQF_SHARED,
+				dev_name(hsotg->dev), hsotg);
+	if (ret < 0) {
+		s3c_hsotg_phy_disable(hsotg);
+		clk_disable_unprepare(hsotg->clk);
+		regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+				       hsotg->supplies);
+		dev_err(dev, "cannot claim IRQ for gadget\n");
+		goto err_supplies;
+	}
+
+	/* hsotg->num_of_eps holds number of EPs other than ep0 */
+
+	if (hsotg->num_of_eps == 0) {
+		dev_err(dev, "wrong number of EPs (zero)\n");
+		ret = -EINVAL;
+		goto err_supplies;
+	}
+
+	/* setup endpoint information */
+
+	INIT_LIST_HEAD(&hsotg->gadget.ep_list);
+	hsotg->gadget.ep0 = &hsotg->eps_out[0]->ep;
+
+	/* allocate EP0 request */
+
+	hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps_out[0]->ep,
+						     GFP_KERNEL);
+	if (!hsotg->ctrl_req) {
+		dev_err(dev, "failed to allocate ctrl req\n");
+		ret = -ENOMEM;
+		goto err_supplies;
+	}
+
+	/* initialise the endpoints now the core has been initialised */
+	for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) {
+		if (hsotg->eps_in[epnum])
+			s3c_hsotg_initep(hsotg, hsotg->eps_in[epnum],
+								epnum, 1);
+		if (hsotg->eps_out[epnum])
+			s3c_hsotg_initep(hsotg, hsotg->eps_out[epnum],
+								epnum, 0);
+	}
+
+	/* disable power and clock */
+	s3c_hsotg_phy_disable(hsotg);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret) {
+		dev_err(dev, "failed to disable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	ret = usb_add_gadget_udc(dev, &hsotg->gadget);
+	if (ret)
+		goto err_supplies;
+
+	s3c_hsotg_create_debug(hsotg);
+
+	s3c_hsotg_dump(hsotg);
+
+	return 0;
+
+err_supplies:
+	s3c_hsotg_phy_disable(hsotg);
+err_clk:
+	clk_disable_unprepare(hsotg->clk);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dwc2_gadget_init);
+
+/**
+ * s3c_hsotg_remove - remove function for hsotg driver
+ * @pdev: The platform information for the driver
+ */
+int s3c_hsotg_remove(struct dwc2_hsotg *hsotg)
+{
+	usb_del_gadget_udc(&hsotg->gadget);
+	s3c_hsotg_delete_debug(hsotg);
+	clk_disable_unprepare(hsotg->clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_hsotg_remove);
+
+int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	mutex_lock(&hsotg->init_mutex);
+
+	if (hsotg->driver) {
+		int ep;
+
+		dev_info(hsotg->dev, "suspending usb gadget %s\n",
+			 hsotg->driver->driver.name);
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		if (hsotg->enabled)
+			s3c_hsotg_core_disconnect(hsotg);
+		s3c_hsotg_disconnect(hsotg);
+		hsotg->gadget.speed = USB_SPEED_UNKNOWN;
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		s3c_hsotg_phy_disable(hsotg);
+
+		for (ep = 0; ep < hsotg->num_of_eps; ep++) {
+			if (hsotg->eps_in[ep])
+				s3c_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			if (hsotg->eps_out[ep])
+				s3c_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+		}
+
+		ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+					     hsotg->supplies);
+		clk_disable(hsotg->clk);
+	}
+
+	mutex_unlock(&hsotg->init_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_hsotg_suspend);
+
+int s3c_hsotg_resume(struct dwc2_hsotg *hsotg)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	mutex_lock(&hsotg->init_mutex);
+
+	if (hsotg->driver) {
+		dev_info(hsotg->dev, "resuming usb gadget %s\n",
+			 hsotg->driver->driver.name);
+
+		clk_enable(hsotg->clk);
+		ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+					    hsotg->supplies);
+
+		s3c_hsotg_phy_enable(hsotg);
+
+		spin_lock_irqsave(&hsotg->lock, flags);
+		s3c_hsotg_core_init_disconnected(hsotg, false);
+		if (hsotg->enabled)
+			s3c_hsotg_core_connect(hsotg);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+	}
+	mutex_unlock(&hsotg->init_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_hsotg_resume);