Linux-libre 4.2-gnu

7 files changed, 251 insertions, 25 deletions

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 827c4f803..dede32e80 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -11,6 +11,13 @@ config USB_DWC3
 
 if USB_DWC3
 
+config USB_DWC3_ULPI
+	bool "Register ULPI PHY Interface"
+	depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
+	help
+	  Select this if you have ULPI type PHY attached to your DWC3
+	  controller.
+
 choice
 	bool "DWC3 Mode Selection"
 	default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 46172f47f..c7076e37c 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -15,6 +15,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
 	dwc3-y				+= gadget.o ep0.o
 endif
 
+ifneq ($(CONFIG_USB_DWC3_ULPI),)
+	dwc3-y				+= ulpi.o
+endif
+
 ifneq ($(CONFIG_DEBUG_FS),)
 	dwc3-y				+= debugfs.o
 endif
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2bbab3d86..ff5773c66 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -117,6 +117,33 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
 }
 
 /**
+ * dwc3_soft_reset - Issue soft reset
+ * @dwc: Pointer to our controller context structure
+ */
+static int dwc3_soft_reset(struct dwc3 *dwc)
+{
+	unsigned long timeout;
+	u32 reg;
+
+	timeout = jiffies + msecs_to_jiffies(500);
+	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		if (!(reg & DWC3_DCTL_CSFTRST))
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(dwc->dev, "Reset Timed Out\n");
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+	} while (true);
+
+	return 0;
+}
+
+/**
  * dwc3_free_one_event_buffer - Frees one event buffer
  * @dwc: Pointer to our controller context structure
  * @evt: Pointer to event buffer to be freed
@@ -367,10 +394,15 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 /**
  * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
  * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
  */
-static void dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_phy_setup(struct dwc3 *dwc)
 {
 	u32 reg;
+	int ret;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
@@ -409,10 +441,43 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 
-	mdelay(100);
-
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 
+	/* Select the HS PHY interface */
+	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+	case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+		if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "utmi", 4)) {
+			reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+			break;
+		} else if (dwc->hsphy_interface &&
+				!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		} else {
+			dev_warn(dwc->dev, "HSPHY Interface not defined\n");
+
+			/* Relying on default value. */
+			if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
+				break;
+		}
+		/* FALLTHROUGH */
+	case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
+		/* Making sure the interface and PHY are operational */
+		ret = dwc3_soft_reset(dwc);
+		if (ret)
+			return ret;
+
+		udelay(1);
+
+		ret = dwc3_ulpi_init(dwc);
+		if (ret)
+			return ret;
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
 	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
 	 * '0' during coreConsultant configuration. So default value will
@@ -427,7 +492,7 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
-	mdelay(100);
+	return 0;
 }
 
 /**
@@ -438,7 +503,6 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
  */
 static int dwc3_core_init(struct dwc3 *dwc)
 {
-	unsigned long		timeout;
 	u32			hwparams4 = dwc->hwparams.hwparams4;
 	u32			reg;
 	int			ret;
@@ -466,21 +530,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	}
 
 	/* issue device SoftReset too */
-	timeout = jiffies + msecs_to_jiffies(500);
-	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
-	do {
-		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
-		if (!(reg & DWC3_DCTL_CSFTRST))
-			break;
-
-		if (time_after(jiffies, timeout)) {
-			dev_err(dwc->dev, "Reset Timed Out\n");
-			ret = -ETIMEDOUT;
-			goto err0;
-		}
-
-		cpu_relax();
-	} while (true);
+	ret = dwc3_soft_reset(dwc);
+	if (ret)
+		goto err0;
 
 	ret = dwc3_core_soft_reset(dwc);
 	if (ret)
@@ -555,8 +607,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
-	dwc3_phy_setup(dwc);
-
 	ret = dwc3_alloc_scratch_buffers(dwc);
 	if (ret)
 		goto err1;
@@ -836,6 +886,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,tx_de_emphasis_quirk");
 		of_property_read_u8(node, "snps,tx_de_emphasis",
 				&tx_de_emphasis);
+		of_property_read_string(node, "snps,hsphy_interface",
+					&dwc->hsphy_interface);
 	} else if (pdata) {
 		dwc->maximum_speed = pdata->maximum_speed;
 		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -863,6 +915,8 @@ static int dwc3_probe(struct platform_device *pdev)
 		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
 		if (pdata->tx_de_emphasis)
 			tx_de_emphasis = pdata->tx_de_emphasis;
+
+		dwc->hsphy_interface = pdata->hsphy_interface;
 	}
 
 	/* default to superspeed if no maximum_speed passed */
@@ -875,12 +929,18 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc->hird_threshold = hird_threshold
 		| (dwc->is_utmi_l1_suspend << 4);
 
+	platform_set_drvdata(pdev, dwc);
+	dwc3_cache_hwparams(dwc);
+
+	ret = dwc3_phy_setup(dwc);
+	if (ret)
+		goto err0;
+
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
 		goto err0;
 
 	spin_lock_init(&dwc->lock);
-	platform_set_drvdata(pdev, dwc);
 
 	if (!dev->dma_mask) {
 		dev->dma_mask = dev->parent->dma_mask;
@@ -892,8 +952,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);
 	pm_runtime_forbid(dev);
 
-	dwc3_cache_hwparams(dwc);
-
 	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
@@ -964,6 +1022,7 @@ err2:
 
 err1:
 	dwc3_free_event_buffers(dwc);
+	dwc3_ulpi_exit(dwc);
 
 err0:
 	/*
@@ -999,6 +1058,7 @@ static int dwc3_remove(struct platform_device *pdev)
 	phy_power_off(dwc->usb3_generic_phy);
 
 	dwc3_core_exit(dwc);
+	dwc3_ulpi_exit(dwc);
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c0eafa6fd..044778884 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -30,6 +30,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
 
@@ -173,6 +174,15 @@
 /* Global USB2 PHY Configuration Register */
 #define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
 #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI	(1 << 4)
+
+/* Global USB2 PHY Vendor Control Register */
+#define DWC3_GUSB2PHYACC_NEWREGREQ	(1 << 25)
+#define DWC3_GUSB2PHYACC_BUSY		(1 << 23)
+#define DWC3_GUSB2PHYACC_WRITE		(1 << 22)
+#define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
+#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n)	(n << 8)
+#define DWC3_GUSB2PHYACC_DATA(n)	(n & 0xff)
 
 /* Global USB3 PIPE Control Register */
 #define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
@@ -652,6 +662,7 @@ struct dwc3_scratchpad_array {
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
+ * @ulpi: pointer to ulpi interface
  * @dcfg: saved contents of DCFG register
  * @gctl: saved contents of GCTL register
  * @isoch_delay: wValue from Set Isochronous Delay request;
@@ -673,6 +684,7 @@ struct dwc3_scratchpad_array {
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
+ * @hsphy_interface: "utmi" or "ulpi"
  * @delayed_status: true when gadget driver asks for delayed status
  * @ep0_bounced: true when we used bounce buffer
  * @ep0_expect_in: true when we expect a DATA IN transfer
@@ -739,6 +751,8 @@ struct dwc3 {
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;
 
+	struct ulpi		*ulpi;
+
 	void __iomem		*regs;
 	size_t			regs_size;
 
@@ -800,6 +814,8 @@ struct dwc3 {
 	u8			lpm_nyet_threshold;
 	u8			hird_threshold;
 
+	const char		*hsphy_interface;
+
 	unsigned		delayed_status:1;
 	unsigned		ep0_bounced:1;
 	unsigned		ep0_expect_in:1;
@@ -1035,4 +1051,14 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
 }
 #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
 
+#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
+int dwc3_ulpi_init(struct dwc3 *dwc);
+void dwc3_ulpi_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_ulpi_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
+{ }
+#endif
+
 #endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index b773fb53d..27e4fc896 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -21,6 +21,8 @@
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
 
 #include "platform_data.h"
 
@@ -31,6 +33,15 @@
 #define PCI_DEVICE_ID_INTEL_SPTLP	0x9d30
 #define PCI_DEVICE_ID_INTEL_SPTH	0xa130
 
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{ "cs-gpios", &cs_gpios, 1 },
+	{ },
+};
+
 static int dwc3_pci_quirks(struct pci_dev *pdev)
 {
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
@@ -65,6 +76,30 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
 						sizeof(pdata));
 	}
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+		struct gpio_desc *gpio;
+
+		acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+					  acpi_dwc3_byt_gpios);
+
+		/* These GPIOs will turn on the USB2 PHY */
+		gpio = gpiod_get(&pdev->dev, "cs");
+		if (!IS_ERR(gpio)) {
+			gpiod_direction_output(gpio, 0);
+			gpiod_set_value_cansleep(gpio, 1);
+			gpiod_put(gpio);
+		}
+
+		gpio = gpiod_get(&pdev->dev, "reset");
+		if (!IS_ERR(gpio)) {
+			gpiod_direction_output(gpio, 0);
+			gpiod_set_value_cansleep(gpio, 1);
+			gpiod_put(gpio);
+			usleep_range(10000, 11000);
+		}
+	}
+
 	return 0;
 }
 
@@ -128,6 +163,7 @@ err:
 
 static void dwc3_pci_remove(struct pci_dev *pci)
 {
+	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
 	platform_device_unregister(pci_get_drvdata(pci));
 }
 
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a2bd464be..d3614ecbb 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -45,4 +45,6 @@ struct dwc3_platform_data {
 
 	unsigned tx_de_emphasis_quirk:1;
 	unsigned tx_de_emphasis:2;
+
+	const char *hsphy_interface;
 };
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
new file mode 100644
index 000000000..ec004c6d7
--- /dev/null
+++ b/drivers/usb/dwc3/ulpi.c
@@ -0,0 +1,91 @@
+/**
+ * ulpi.c - DesignWare USB3 Controller's ULPI PHY interface
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ulpi/regs.h>
+
+#include "core.h"
+#include "io.h"
+
+#define DWC3_ULPI_ADDR(a) \
+		((a >= ULPI_EXT_VENDOR_SPECIFIC) ? \
+		DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
+		DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+{
+	unsigned count = 1000;
+	u32 reg;
+
+	while (count--) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+		if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+			return 0;
+		cpu_relax();
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr)
+{
+	struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+	u32 reg;
+	int ret;
+
+	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+	ret = dwc3_ulpi_busyloop(dwc);
+	if (ret)
+		return ret;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+
+	return DWC3_GUSB2PHYACC_DATA(reg);
+}
+
+static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val)
+{
+	struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+	u32 reg;
+
+	reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+	reg |= DWC3_GUSB2PHYACC_WRITE | val;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+	return dwc3_ulpi_busyloop(dwc);
+}
+
+static struct ulpi_ops dwc3_ulpi_ops = {
+	.read = dwc3_ulpi_read,
+	.write = dwc3_ulpi_write,
+};
+
+int dwc3_ulpi_init(struct dwc3 *dwc)
+{
+	/* Register the interface */
+	dwc->ulpi = ulpi_register_interface(dwc->dev, &dwc3_ulpi_ops);
+	if (IS_ERR(dwc->ulpi)) {
+		dev_err(dwc->dev, "failed to register ULPI interface");
+		return PTR_ERR(dwc->ulpi);
+	}
+
+	return 0;
+}
+
+void dwc3_ulpi_exit(struct dwc3 *dwc)
+{
+	if (dwc->ulpi) {
+		ulpi_unregister_interface(dwc->ulpi);
+		dwc->ulpi = NULL;
+	}
+}