Initial import

1 files changed, 1357 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
new file mode 100644
index 000000000..85a712a03
--- /dev/null
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -0,0 +1,1357 @@
+/* linux/drivers/usb/gadget/s3c-hsudc.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/prefetch.h>
+#include <linux/platform_data/s3c-hsudc.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#define S3C_HSUDC_REG(x)	(x)
+
+/* Non-Indexed Registers */
+#define S3C_IR				S3C_HSUDC_REG(0x00) /* Index Register */
+#define S3C_EIR				S3C_HSUDC_REG(0x04) /* EP Intr Status */
+#define S3C_EIR_EP0			(1<<0)
+#define S3C_EIER			S3C_HSUDC_REG(0x08) /* EP Intr Enable */
+#define S3C_FAR				S3C_HSUDC_REG(0x0c) /* Gadget Address */
+#define S3C_FNR				S3C_HSUDC_REG(0x10) /* Frame Number */
+#define S3C_EDR				S3C_HSUDC_REG(0x14) /* EP Direction */
+#define S3C_TR				S3C_HSUDC_REG(0x18) /* Test Register */
+#define S3C_SSR				S3C_HSUDC_REG(0x1c) /* System Status */
+#define S3C_SSR_DTZIEN_EN		(0xff8f)
+#define S3C_SSR_ERR			(0xff80)
+#define S3C_SSR_VBUSON			(1 << 8)
+#define S3C_SSR_HSP			(1 << 4)
+#define S3C_SSR_SDE			(1 << 3)
+#define S3C_SSR_RESUME			(1 << 2)
+#define S3C_SSR_SUSPEND			(1 << 1)
+#define S3C_SSR_RESET			(1 << 0)
+#define S3C_SCR				S3C_HSUDC_REG(0x20) /* System Control */
+#define S3C_SCR_DTZIEN_EN		(1 << 14)
+#define S3C_SCR_RRD_EN			(1 << 5)
+#define S3C_SCR_SUS_EN			(1 << 1)
+#define S3C_SCR_RST_EN			(1 << 0)
+#define S3C_EP0SR			S3C_HSUDC_REG(0x24) /* EP0 Status */
+#define S3C_EP0SR_EP0_LWO		(1 << 6)
+#define S3C_EP0SR_STALL			(1 << 4)
+#define S3C_EP0SR_TX_SUCCESS		(1 << 1)
+#define S3C_EP0SR_RX_SUCCESS		(1 << 0)
+#define S3C_EP0CR			S3C_HSUDC_REG(0x28) /* EP0 Control */
+#define S3C_BR(_x)			S3C_HSUDC_REG(0x60 + (_x * 4))
+
+/* Indexed Registers */
+#define S3C_ESR				S3C_HSUDC_REG(0x2c) /* EPn Status */
+#define S3C_ESR_FLUSH			(1 << 6)
+#define S3C_ESR_STALL			(1 << 5)
+#define S3C_ESR_LWO			(1 << 4)
+#define S3C_ESR_PSIF_ONE		(1 << 2)
+#define S3C_ESR_PSIF_TWO		(2 << 2)
+#define S3C_ESR_TX_SUCCESS		(1 << 1)
+#define S3C_ESR_RX_SUCCESS		(1 << 0)
+#define S3C_ECR				S3C_HSUDC_REG(0x30) /* EPn Control */
+#define S3C_ECR_DUEN			(1 << 7)
+#define S3C_ECR_FLUSH			(1 << 6)
+#define S3C_ECR_STALL			(1 << 1)
+#define S3C_ECR_IEMS			(1 << 0)
+#define S3C_BRCR			S3C_HSUDC_REG(0x34) /* Read Count */
+#define S3C_BWCR			S3C_HSUDC_REG(0x38) /* Write Count */
+#define S3C_MPR				S3C_HSUDC_REG(0x3c) /* Max Pkt Size */
+
+#define WAIT_FOR_SETUP			(0)
+#define DATA_STATE_XMIT			(1)
+#define DATA_STATE_RECV			(2)
+
+static const char * const s3c_hsudc_supply_names[] = {
+	"vdda",		/* analog phy supply, 3.3V */
+	"vddi",		/* digital phy supply, 1.2V */
+	"vddosc",	/* oscillator supply, 1.8V - 3.3V */
+};
+
+/**
+ * struct s3c_hsudc_ep - Endpoint representation used by driver.
+ * @ep: USB gadget layer representation of device endpoint.
+ * @name: Endpoint name (as required by ep autoconfiguration).
+ * @dev: Reference to the device controller to which this EP belongs.
+ * @desc: Endpoint descriptor obtained from the gadget driver.
+ * @queue: Transfer request queue for the endpoint.
+ * @stopped: Maintains state of endpoint, set if EP is halted.
+ * @bEndpointAddress: EP address (including direction bit).
+ * @fifo: Base address of EP FIFO.
+ */
+struct s3c_hsudc_ep {
+	struct usb_ep ep;
+	char name[20];
+	struct s3c_hsudc *dev;
+	struct list_head queue;
+	u8 stopped;
+	u8 wedge;
+	u8 bEndpointAddress;
+	void __iomem *fifo;
+};
+
+/**
+ * struct s3c_hsudc_req - Driver encapsulation of USB gadget transfer request.
+ * @req: Reference to USB gadget transfer request.
+ * @queue: Used for inserting this request to the endpoint request queue.
+ */
+struct s3c_hsudc_req {
+	struct usb_request req;
+	struct list_head queue;
+};
+
+/**
+ * struct s3c_hsudc - Driver's abstraction of the device controller.
+ * @gadget: Instance of usb_gadget which is referenced by gadget driver.
+ * @driver: Reference to currenty active gadget driver.
+ * @dev: The device reference used by probe function.
+ * @lock: Lock to synchronize the usage of Endpoints (EP's are indexed).
+ * @regs: Remapped base address of controller's register space.
+ * irq: IRQ number used by the controller.
+ * uclk: Reference to the controller clock.
+ * ep0state: Current state of EP0.
+ * ep: List of endpoints supported by the controller.
+ */
+struct s3c_hsudc {
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+	struct device *dev;
+	struct s3c24xx_hsudc_platdata *pd;
+	struct usb_phy *transceiver;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsudc_supply_names)];
+	spinlock_t lock;
+	void __iomem *regs;
+	int irq;
+	struct clk *uclk;
+	int ep0state;
+	struct s3c_hsudc_ep ep[];
+};
+
+#define ep_maxpacket(_ep)	((_ep)->ep.maxpacket)
+#define ep_is_in(_ep)		((_ep)->bEndpointAddress & USB_DIR_IN)
+#define ep_index(_ep)		((_ep)->bEndpointAddress & \
+					USB_ENDPOINT_NUMBER_MASK)
+
+static const char driver_name[] = "s3c-udc";
+static const char ep0name[] = "ep0-control";
+
+static inline struct s3c_hsudc_req *our_req(struct usb_request *req)
+{
+	return container_of(req, struct s3c_hsudc_req, req);
+}
+
+static inline struct s3c_hsudc_ep *our_ep(struct usb_ep *ep)
+{
+	return container_of(ep, struct s3c_hsudc_ep, ep);
+}
+
+static inline struct s3c_hsudc *to_hsudc(struct usb_gadget *gadget)
+{
+	return container_of(gadget, struct s3c_hsudc, gadget);
+}
+
+static inline void set_index(struct s3c_hsudc *hsudc, int ep_addr)
+{
+	ep_addr &= USB_ENDPOINT_NUMBER_MASK;
+	writel(ep_addr, hsudc->regs + S3C_IR);
+}
+
+static inline void __orr32(void __iomem *ptr, u32 val)
+{
+	writel(readl(ptr) | val, ptr);
+}
+
+static void s3c_hsudc_init_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+	mdelay(1);
+
+	cfg = readl(S3C2443_URSTCON);
+	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+	writel(cfg, S3C2443_URSTCON);
+
+	cfg = readl(S3C2443_PHYCTRL);
+	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+	writel(cfg, S3C2443_PHYCTRL);
+
+	cfg = readl(S3C2443_PHYPWR);
+	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+		S3C2443_PHYPWR_ANALOG_PD);
+	cfg |= S3C2443_PHYPWR_COMMON_ON;
+	writel(cfg, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON);
+	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+		S3C2443_UCLKCON_TCLKEN);
+	writel(cfg, S3C2443_UCLKCON);
+}
+
+static void s3c_hsudc_uninit_phy(void)
+{
+	u32 cfg;
+
+	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+	writel(cfg, S3C2443_PWRCFG);
+
+	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+	writel(cfg, S3C2443_UCLKCON);
+}
+
+/**
+ * s3c_hsudc_complete_request - Complete a transfer request.
+ * @hsep: Endpoint to which the request belongs.
+ * @hsreq: Transfer request to be completed.
+ * @status: Transfer completion status for the transfer request.
+ */
+static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq, int status)
+{
+	unsigned int stopped = hsep->stopped;
+	struct s3c_hsudc *hsudc = hsep->dev;
+
+	list_del_init(&hsreq->queue);
+	hsreq->req.status = status;
+
+	if (!ep_index(hsep)) {
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+	}
+
+	hsep->stopped = 1;
+	spin_unlock(&hsudc->lock);
+	usb_gadget_giveback_request(&hsep->ep, &hsreq->req);
+	spin_lock(&hsudc->lock);
+	hsep->stopped = stopped;
+}
+
+/**
+ * s3c_hsudc_nuke_ep - Terminate all requests queued for a endpoint.
+ * @hsep: Endpoint for which queued requests have to be terminated.
+ * @status: Transfer completion status for the transfer request.
+ */
+static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	while (!list_empty(&hsep->queue)) {
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		s3c_hsudc_complete_request(hsep, hsreq, status);
+	}
+}
+
+/**
+ * s3c_hsudc_stop_activity - Stop activity on all endpoints.
+ * @hsudc: Device controller for which EP activity is to be stopped.
+ *
+ * All the endpoints are stopped and any pending transfer requests if any on
+ * the endpoint are terminated.
+ */
+static void s3c_hsudc_stop_activity(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep;
+	int epnum;
+
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	for (epnum = 0; epnum < hsudc->pd->epnum; epnum++) {
+		hsep = &hsudc->ep[epnum];
+		hsep->stopped = 1;
+		s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
+	}
+}
+
+/**
+ * s3c_hsudc_read_setup_pkt - Read the received setup packet from EP0 fifo.
+ * @hsudc: Device controller from which setup packet is to be read.
+ * @buf: The buffer into which the setup packet is read.
+ *
+ * The setup packet received in the EP0 fifo is read and stored into a
+ * given buffer address.
+ */
+
+static void s3c_hsudc_read_setup_pkt(struct s3c_hsudc *hsudc, u16 *buf)
+{
+	int count;
+
+	count = readl(hsudc->regs + S3C_BRCR);
+	while (count--)
+		*buf++ = (u16)readl(hsudc->regs + S3C_BR(0));
+
+	writel(S3C_EP0SR_RX_SUCCESS, hsudc->regs + S3C_EP0SR);
+}
+
+/**
+ * s3c_hsudc_write_fifo - Write next chunk of transfer data to EP fifo.
+ * @hsep: Endpoint to which the data is to be written.
+ * @hsreq: Transfer request from which the next chunk of data is written.
+ *
+ * Write the next chunk of data from a transfer request to the endpoint FIFO.
+ * If the transfer request completes, 1 is returned, otherwise 0 is returned.
+ */
+static int s3c_hsudc_write_fifo(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq)
+{
+	u16 *buf;
+	u32 max = ep_maxpacket(hsep);
+	u32 count, length;
+	bool is_last;
+	void __iomem *fifo = hsep->fifo;
+
+	buf = hsreq->req.buf + hsreq->req.actual;
+	prefetch(buf);
+
+	length = hsreq->req.length - hsreq->req.actual;
+	length = min(length, max);
+	hsreq->req.actual += length;
+
+	writel(length, hsep->dev->regs + S3C_BWCR);
+	for (count = 0; count < length; count += 2)
+		writel(*buf++, fifo);
+
+	if (count != max) {
+		is_last = true;
+	} else {
+		if (hsreq->req.length != hsreq->req.actual || hsreq->req.zero)
+			is_last = false;
+		else
+			is_last = true;
+	}
+
+	if (is_last) {
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsudc_read_fifo - Read the next chunk of data from EP fifo.
+ * @hsep: Endpoint from which the data is to be read.
+ * @hsreq: Transfer request to which the next chunk of data read is written.
+ *
+ * Read the next chunk of data from the endpoint FIFO and a write it to the
+ * transfer request buffer. If the transfer request completes, 1 is returned,
+ * otherwise 0 is returned.
+ */
+static int s3c_hsudc_read_fifo(struct s3c_hsudc_ep *hsep,
+				struct s3c_hsudc_req *hsreq)
+{
+	struct s3c_hsudc *hsudc = hsep->dev;
+	u32 csr, offset;
+	u16 *buf, word;
+	u32 buflen, rcnt, rlen;
+	void __iomem *fifo = hsep->fifo;
+	u32 is_short = 0;
+
+	offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
+	csr = readl(hsudc->regs + offset);
+	if (!(csr & S3C_ESR_RX_SUCCESS))
+		return -EINVAL;
+
+	buf = hsreq->req.buf + hsreq->req.actual;
+	prefetchw(buf);
+	buflen = hsreq->req.length - hsreq->req.actual;
+
+	rcnt = readl(hsudc->regs + S3C_BRCR);
+	rlen = (csr & S3C_ESR_LWO) ? (rcnt * 2 - 1) : (rcnt * 2);
+
+	hsreq->req.actual += min(rlen, buflen);
+	is_short = (rlen < hsep->ep.maxpacket);
+
+	while (rcnt-- != 0) {
+		word = (u16)readl(fifo);
+		if (buflen) {
+			*buf++ = word;
+			buflen--;
+		} else {
+			hsreq->req.status = -EOVERFLOW;
+		}
+	}
+
+	writel(S3C_ESR_RX_SUCCESS, hsudc->regs + offset);
+
+	if (is_short || hsreq->req.actual == hsreq->req.length) {
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * s3c_hsudc_epin_intr - Handle in-endpoint interrupt.
+ * @hsudc - Device controller for which the interrupt is to be handled.
+ * @ep_idx - Endpoint number on which an interrupt is pending.
+ *
+ * Handles interrupt for a in-endpoint. The interrupts that are handled are
+ * stall and data transmit complete interrupt.
+ */
+static void s3c_hsudc_epin_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr;
+
+	csr = readl(hsudc->regs + S3C_ESR);
+	if (csr & S3C_ESR_STALL) {
+		writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
+		return;
+	}
+
+	if (csr & S3C_ESR_TX_SUCCESS) {
+		writel(S3C_ESR_TX_SUCCESS, hsudc->regs + S3C_ESR);
+		if (list_empty(&hsep->queue))
+			return;
+
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		if ((s3c_hsudc_write_fifo(hsep, hsreq) == 0) &&
+				(csr & S3C_ESR_PSIF_TWO))
+			s3c_hsudc_write_fifo(hsep, hsreq);
+	}
+}
+
+/**
+ * s3c_hsudc_epout_intr - Handle out-endpoint interrupt.
+ * @hsudc - Device controller for which the interrupt is to be handled.
+ * @ep_idx - Endpoint number on which an interrupt is pending.
+ *
+ * Handles interrupt for a out-endpoint. The interrupts that are handled are
+ * stall, flush and data ready interrupt.
+ */
+static void s3c_hsudc_epout_intr(struct s3c_hsudc *hsudc, u32 ep_idx)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[ep_idx];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr;
+
+	csr = readl(hsudc->regs + S3C_ESR);
+	if (csr & S3C_ESR_STALL) {
+		writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
+		return;
+	}
+
+	if (csr & S3C_ESR_FLUSH) {
+		__orr32(hsudc->regs + S3C_ECR, S3C_ECR_FLUSH);
+		return;
+	}
+
+	if (csr & S3C_ESR_RX_SUCCESS) {
+		if (list_empty(&hsep->queue))
+			return;
+
+		hsreq = list_entry(hsep->queue.next,
+				struct s3c_hsudc_req, queue);
+		if (((s3c_hsudc_read_fifo(hsep, hsreq)) == 0) &&
+				(csr & S3C_ESR_PSIF_TWO))
+			s3c_hsudc_read_fifo(hsep, hsreq);
+	}
+}
+
+/** s3c_hsudc_set_halt - Set or clear a endpoint halt.
+ * @_ep: Endpoint on which halt has to be set or cleared.
+ * @value: 1 for setting halt on endpoint, 0 to clear halt.
+ *
+ * Set or clear endpoint halt. If halt is set, the endpoint is stopped.
+ * If halt is cleared, for in-endpoints, if there are any pending
+ * transfer requests, transfers are started.
+ */
+static int s3c_hsudc_set_halt(struct usb_ep *_ep, int value)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	struct s3c_hsudc_req *hsreq;
+	unsigned long irqflags;
+	u32 ecr;
+	u32 offset;
+
+	if (value && ep_is_in(hsep) && !list_empty(&hsep->queue))
+		return -EAGAIN;
+
+	spin_lock_irqsave(&hsudc->lock, irqflags);
+	set_index(hsudc, ep_index(hsep));
+	offset = (ep_index(hsep)) ? S3C_ECR : S3C_EP0CR;
+	ecr = readl(hsudc->regs + offset);
+
+	if (value) {
+		ecr |= S3C_ECR_STALL;
+		if (ep_index(hsep))
+			ecr |= S3C_ECR_FLUSH;
+		hsep->stopped = 1;
+	} else {
+		ecr &= ~S3C_ECR_STALL;
+		hsep->stopped = hsep->wedge = 0;
+	}
+	writel(ecr, hsudc->regs + offset);
+
+	if (ep_is_in(hsep) && !list_empty(&hsep->queue) && !value) {
+		hsreq = list_entry(hsep->queue.next,
+			struct s3c_hsudc_req, queue);
+		if (hsreq)
+			s3c_hsudc_write_fifo(hsep, hsreq);
+	}
+
+	spin_unlock_irqrestore(&hsudc->lock, irqflags);
+	return 0;
+}
+
+/** s3c_hsudc_set_wedge - Sets the halt feature with the clear requests ignored
+ * @_ep: Endpoint on which wedge has to be set.
+ *
+ * Sets the halt feature with the clear requests ignored.
+ */
+static int s3c_hsudc_set_wedge(struct usb_ep *_ep)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+
+	if (!hsep)
+		return -EINVAL;
+
+	hsep->wedge = 1;
+	return usb_ep_set_halt(_ep);
+}
+
+/** s3c_hsudc_handle_reqfeat - Handle set feature or clear feature requests.
+ * @_ep: Device controller on which the set/clear feature needs to be handled.
+ * @ctrl: Control request as received on the endpoint 0.
+ *
+ * Handle set feature or clear feature control requests on the control endpoint.
+ */
+static int s3c_hsudc_handle_reqfeat(struct s3c_hsudc *hsudc,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsudc_ep *hsep;
+	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
+	u8 ep_num = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
+
+	if (ctrl->bRequestType == USB_RECIP_ENDPOINT) {
+		hsep = &hsudc->ep[ep_num];
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_ENDPOINT_HALT:
+			if (set || (!set && !hsep->wedge))
+				s3c_hsudc_set_halt(&hsep->ep, set);
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * s3c_hsudc_process_req_status - Handle get status control request.
+ * @hsudc: Device controller on which get status request has be handled.
+ * @ctrl: Control request as received on the endpoint 0.
+ *
+ * Handle get status control request received on control endpoint.
+ */
+static void s3c_hsudc_process_req_status(struct s3c_hsudc *hsudc,
+					struct usb_ctrlrequest *ctrl)
+{
+	struct s3c_hsudc_ep *hsep0 = &hsudc->ep[0];
+	struct s3c_hsudc_req hsreq;
+	struct s3c_hsudc_ep *hsep;
+	__le16 reply;
+	u8 epnum;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_INTERFACE:
+		reply = cpu_to_le16(0);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		epnum = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		hsep = &hsudc->ep[epnum];
+		reply = cpu_to_le16(hsep->stopped ? 1 : 0);
+		break;
+	}
+
+	INIT_LIST_HEAD(&hsreq.queue);
+	hsreq.req.length = 2;
+	hsreq.req.buf = &reply;
+	hsreq.req.actual = 0;
+	hsreq.req.complete = NULL;
+	s3c_hsudc_write_fifo(hsep0, &hsreq);
+}
+
+/**
+ * s3c_hsudc_process_setup - Process control request received on endpoint 0.
+ * @hsudc: Device controller on which control request has been received.
+ *
+ * Read the control request received on endpoint 0, decode it and handle
+ * the request.
+ */
+static void s3c_hsudc_process_setup(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
+	struct usb_ctrlrequest ctrl = {0};
+	int ret;
+
+	s3c_hsudc_nuke_ep(hsep, -EPROTO);
+	s3c_hsudc_read_setup_pkt(hsudc, (u16 *)&ctrl);
+
+	if (ctrl.bRequestType & USB_DIR_IN) {
+		hsep->bEndpointAddress |= USB_DIR_IN;
+		hsudc->ep0state = DATA_STATE_XMIT;
+	} else {
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+		hsudc->ep0state = DATA_STATE_RECV;
+	}
+
+	switch (ctrl.bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+			break;
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		return;
+
+	case USB_REQ_GET_STATUS:
+		if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			break;
+		s3c_hsudc_process_req_status(hsudc, &ctrl);
+		return;
+
+	case USB_REQ_SET_FEATURE:
+	case USB_REQ_CLEAR_FEATURE:
+		if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			break;
+		s3c_hsudc_handle_reqfeat(hsudc, &ctrl);
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	if (hsudc->driver) {
+		spin_unlock(&hsudc->lock);
+		ret = hsudc->driver->setup(&hsudc->gadget, &ctrl);
+		spin_lock(&hsudc->lock);
+
+		if (ctrl.bRequest == USB_REQ_SET_CONFIGURATION) {
+			hsep->bEndpointAddress &= ~USB_DIR_IN;
+			hsudc->ep0state = WAIT_FOR_SETUP;
+		}
+
+		if (ret < 0) {
+			dev_err(hsudc->dev, "setup failed, returned %d\n",
+						ret);
+			s3c_hsudc_set_halt(&hsep->ep, 1);
+			hsudc->ep0state = WAIT_FOR_SETUP;
+			hsep->bEndpointAddress &= ~USB_DIR_IN;
+		}
+	}
+}
+
+/** s3c_hsudc_handle_ep0_intr - Handle endpoint 0 interrupt.
+ * @hsudc: Device controller on which endpoint 0 interrupt has occured.
+ *
+ * Handle endpoint 0 interrupt when it occurs. EP0 interrupt could occur
+ * when a stall handshake is sent to host or data is sent/received on
+ * endpoint 0.
+ */
+static void s3c_hsudc_handle_ep0_intr(struct s3c_hsudc *hsudc)
+{
+	struct s3c_hsudc_ep *hsep = &hsudc->ep[0];
+	struct s3c_hsudc_req *hsreq;
+	u32 csr = readl(hsudc->regs + S3C_EP0SR);
+	u32 ecr;
+
+	if (csr & S3C_EP0SR_STALL) {
+		ecr = readl(hsudc->regs + S3C_EP0CR);
+		ecr &= ~(S3C_ECR_STALL | S3C_ECR_FLUSH);
+		writel(ecr, hsudc->regs + S3C_EP0CR);
+
+		writel(S3C_EP0SR_STALL, hsudc->regs + S3C_EP0SR);
+		hsep->stopped = 0;
+
+		s3c_hsudc_nuke_ep(hsep, -ECONNABORTED);
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		hsep->bEndpointAddress &= ~USB_DIR_IN;
+		return;
+	}
+
+	if (csr & S3C_EP0SR_TX_SUCCESS) {
+		writel(S3C_EP0SR_TX_SUCCESS, hsudc->regs + S3C_EP0SR);
+		if (ep_is_in(hsep)) {
+			if (list_empty(&hsep->queue))
+				return;
+
+			hsreq = list_entry(hsep->queue.next,
+					struct s3c_hsudc_req, queue);
+			s3c_hsudc_write_fifo(hsep, hsreq);
+		}
+	}
+
+	if (csr & S3C_EP0SR_RX_SUCCESS) {
+		if (hsudc->ep0state == WAIT_FOR_SETUP)
+			s3c_hsudc_process_setup(hsudc);
+		else {
+			if (!ep_is_in(hsep)) {
+				if (list_empty(&hsep->queue))
+					return;
+				hsreq = list_entry(hsep->queue.next,
+					struct s3c_hsudc_req, queue);
+				s3c_hsudc_read_fifo(hsep, hsreq);
+			}
+		}
+	}
+}
+
+/**
+ * s3c_hsudc_ep_enable - Enable a endpoint.
+ * @_ep: The endpoint to be enabled.
+ * @desc: Endpoint descriptor.
+ *
+ * Enables a endpoint when called from the gadget driver. Endpoint stall if
+ * any is cleared, transfer type is configured and endpoint interrupt is
+ * enabled.
+ */
+static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	struct s3c_hsudc_ep *hsep;
+	struct s3c_hsudc *hsudc;
+	unsigned long flags;
+	u32 ecr = 0;
+
+	hsep = our_ep(_ep);
+	if (!_ep || !desc || _ep->name == ep0name
+		|| desc->bDescriptorType != USB_DT_ENDPOINT
+		|| hsep->bEndpointAddress != desc->bEndpointAddress
+		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
+		return -EINVAL;
+
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+		&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
+		|| !desc->wMaxPacketSize)
+		return -ERANGE;
+
+	hsudc = hsep->dev;
+	if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	ecr |= ((usb_endpoint_xfer_int(desc)) ? S3C_ECR_IEMS : S3C_ECR_DUEN);
+	writel(ecr, hsudc->regs + S3C_ECR);
+
+	hsep->stopped = hsep->wedge = 0;
+	hsep->ep.desc = desc;
+	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
+
+	s3c_hsudc_set_halt(_ep, 0);
+	__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_ep_disable - Disable a endpoint.
+ * @_ep: The endpoint to be disabled.
+ * @desc: Endpoint descriptor.
+ *
+ * Disables a endpoint when called from the gadget driver.
+ */
+static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	unsigned long flags;
+
+	if (!_ep || !hsep->ep.desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	__clear_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
+
+	s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
+
+	hsep->ep.desc = NULL;
+	hsep->stopped = 1;
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_alloc_request - Allocate a new request.
+ * @_ep: Endpoint for which request is allocated (not used).
+ * @gfp_flags: Flags used for the allocation.
+ *
+ * Allocates a single transfer request structure when called from gadget driver.
+ */
+static struct usb_request *s3c_hsudc_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	hsreq = kzalloc(sizeof(*hsreq), gfp_flags);
+	if (!hsreq)
+		return NULL;
+
+	INIT_LIST_HEAD(&hsreq->queue);
+	return &hsreq->req;
+}
+
+/**
+ * s3c_hsudc_free_request - Deallocate a request.
+ * @ep: Endpoint for which request is deallocated (not used).
+ * @_req: Request to be deallocated.
+ *
+ * Allocates a single transfer request structure when called from gadget driver.
+ */
+static void s3c_hsudc_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct s3c_hsudc_req *hsreq;
+
+	hsreq = our_req(_req);
+	WARN_ON(!list_empty(&hsreq->queue));
+	kfree(hsreq);
+}
+
+/**
+ * s3c_hsudc_queue - Queue a transfer request for the endpoint.
+ * @_ep: Endpoint for which the request is queued.
+ * @_req: Request to be queued.
+ * @gfp_flags: Not used.
+ *
+ * Start or enqueue a request for a endpoint when called from gadget driver.
+ */
+static int s3c_hsudc_queue(struct usb_ep *_ep, struct usb_request *_req,
+			gfp_t gfp_flags)
+{
+	struct s3c_hsudc_req *hsreq;
+	struct s3c_hsudc_ep *hsep;
+	struct s3c_hsudc *hsudc;
+	unsigned long flags;
+	u32 offset;
+	u32 csr;
+
+	hsreq = our_req(_req);
+	if ((!_req || !_req->complete || !_req->buf ||
+		!list_empty(&hsreq->queue)))
+		return -EINVAL;
+
+	hsep = our_ep(_ep);
+	hsudc = hsep->dev;
+	if (!hsudc->driver || hsudc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+	set_index(hsudc, hsep->bEndpointAddress);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (!ep_index(hsep) && _req->length == 0) {
+		hsudc->ep0state = WAIT_FOR_SETUP;
+		s3c_hsudc_complete_request(hsep, hsreq, 0);
+		spin_unlock_irqrestore(&hsudc->lock, flags);
+		return 0;
+	}
+
+	if (list_empty(&hsep->queue) && !hsep->stopped) {
+		offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
+		if (ep_is_in(hsep)) {
+			csr = readl(hsudc->regs + offset);
+			if (!(csr & S3C_ESR_TX_SUCCESS) &&
+				(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
+				hsreq = NULL;
+		} else {
+			csr = readl(hsudc->regs + offset);
+			if ((csr & S3C_ESR_RX_SUCCESS)
+				   && (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
+				hsreq = NULL;
+		}
+	}
+
+	if (hsreq)
+		list_add_tail(&hsreq->queue, &hsep->queue);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+/**
+ * s3c_hsudc_dequeue - Dequeue a transfer request from an endpoint.
+ * @_ep: Endpoint from which the request is dequeued.
+ * @_req: Request to be dequeued.
+ *
+ * Dequeue a request from a endpoint when called from gadget driver.
+ */
+static int s3c_hsudc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct s3c_hsudc_ep *hsep = our_ep(_ep);
+	struct s3c_hsudc *hsudc = hsep->dev;
+	struct s3c_hsudc_req *hsreq;
+	unsigned long flags;
+
+	hsep = our_ep(_ep);
+	if (!_ep || hsep->ep.name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+
+	list_for_each_entry(hsreq, &hsep->queue, queue) {
+		if (&hsreq->req == _req)
+			break;
+	}
+	if (&hsreq->req != _req) {
+		spin_unlock_irqrestore(&hsudc->lock, flags);
+		return -EINVAL;
+	}
+
+	set_index(hsudc, hsep->bEndpointAddress);
+	s3c_hsudc_complete_request(hsep, hsreq, -ECONNRESET);
+
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+	return 0;
+}
+
+static struct usb_ep_ops s3c_hsudc_ep_ops = {
+	.enable = s3c_hsudc_ep_enable,
+	.disable = s3c_hsudc_ep_disable,
+	.alloc_request = s3c_hsudc_alloc_request,
+	.free_request = s3c_hsudc_free_request,
+	.queue = s3c_hsudc_queue,
+	.dequeue = s3c_hsudc_dequeue,
+	.set_halt = s3c_hsudc_set_halt,
+	.set_wedge = s3c_hsudc_set_wedge,
+};
+
+/**
+ * s3c_hsudc_initep - Initialize a endpoint to default state.
+ * @hsudc - Reference to the device controller.
+ * @hsep - Endpoint to be initialized.
+ * @epnum - Address to be assigned to the endpoint.
+ *
+ * Initialize a endpoint with default configuration.
+ */
+static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
+				struct s3c_hsudc_ep *hsep, int epnum)
+{
+	char *dir;
+
+	if ((epnum % 2) == 0) {
+		dir = "out";
+	} else {
+		dir = "in";
+		hsep->bEndpointAddress = USB_DIR_IN;
+	}
+
+	hsep->bEndpointAddress |= epnum;
+	if (epnum)
+		snprintf(hsep->name, sizeof(hsep->name), "ep%d%s", epnum, dir);
+	else
+		snprintf(hsep->name, sizeof(hsep->name), "%s", ep0name);
+
+	INIT_LIST_HEAD(&hsep->queue);
+	INIT_LIST_HEAD(&hsep->ep.ep_list);
+	if (epnum)
+		list_add_tail(&hsep->ep.ep_list, &hsudc->gadget.ep_list);
+
+	hsep->dev = hsudc;
+	hsep->ep.name = hsep->name;
+	usb_ep_set_maxpacket_limit(&hsep->ep, epnum ? 512 : 64);
+	hsep->ep.ops = &s3c_hsudc_ep_ops;
+	hsep->fifo = hsudc->regs + S3C_BR(epnum);
+	hsep->ep.desc = NULL;
+	hsep->stopped = 0;
+	hsep->wedge = 0;
+
+	set_index(hsudc, epnum);
+	writel(hsep->ep.maxpacket, hsudc->regs + S3C_MPR);
+}
+
+/**
+ * s3c_hsudc_setup_ep - Configure all endpoints to default state.
+ * @hsudc: Reference to device controller.
+ *
+ * Configures all endpoints to default state.
+ */
+static void s3c_hsudc_setup_ep(struct s3c_hsudc *hsudc)
+{
+	int epnum;
+
+	hsudc->ep0state = WAIT_FOR_SETUP;
+	INIT_LIST_HEAD(&hsudc->gadget.ep_list);
+	for (epnum = 0; epnum < hsudc->pd->epnum; epnum++)
+		s3c_hsudc_initep(hsudc, &hsudc->ep[epnum], epnum);
+}
+
+/**
+ * s3c_hsudc_reconfig - Reconfigure the device controller to default state.
+ * @hsudc: Reference to device controller.
+ *
+ * Reconfigures the device controller registers to a default state.
+ */
+static void s3c_hsudc_reconfig(struct s3c_hsudc *hsudc)
+{
+	writel(0xAA, hsudc->regs + S3C_EDR);
+	writel(1, hsudc->regs + S3C_EIER);
+	writel(0, hsudc->regs + S3C_TR);
+	writel(S3C_SCR_DTZIEN_EN | S3C_SCR_RRD_EN | S3C_SCR_SUS_EN |
+			S3C_SCR_RST_EN, hsudc->regs + S3C_SCR);
+	writel(0, hsudc->regs + S3C_EP0CR);
+
+	s3c_hsudc_setup_ep(hsudc);
+}
+
+/**
+ * s3c_hsudc_irq - Interrupt handler for device controller.
+ * @irq: Not used.
+ * @_dev: Reference to the device controller.
+ *
+ * Interrupt handler for the device controller. This handler handles controller
+ * interrupts and endpoint interrupts.
+ */
+static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
+{
+	struct s3c_hsudc *hsudc = _dev;
+	struct s3c_hsudc_ep *hsep;
+	u32 ep_intr;
+	u32 sys_status;
+	u32 ep_idx;
+
+	spin_lock(&hsudc->lock);
+
+	sys_status = readl(hsudc->regs + S3C_SSR);
+	ep_intr = readl(hsudc->regs + S3C_EIR) & 0x3FF;
+
+	if (!ep_intr && !(sys_status & S3C_SSR_DTZIEN_EN)) {
+		spin_unlock(&hsudc->lock);
+		return IRQ_HANDLED;
+	}
+
+	if (sys_status) {
+		if (sys_status & S3C_SSR_VBUSON)
+			writel(S3C_SSR_VBUSON, hsudc->regs + S3C_SSR);
+
+		if (sys_status & S3C_SSR_ERR)
+			writel(S3C_SSR_ERR, hsudc->regs + S3C_SSR);
+
+		if (sys_status & S3C_SSR_SDE) {
+			writel(S3C_SSR_SDE, hsudc->regs + S3C_SSR);
+			hsudc->gadget.speed = (sys_status & S3C_SSR_HSP) ?
+				USB_SPEED_HIGH : USB_SPEED_FULL;
+		}
+
+		if (sys_status & S3C_SSR_SUSPEND) {
+			writel(S3C_SSR_SUSPEND, hsudc->regs + S3C_SSR);
+			if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
+				&& hsudc->driver && hsudc->driver->suspend)
+				hsudc->driver->suspend(&hsudc->gadget);
+		}
+
+		if (sys_status & S3C_SSR_RESUME) {
+			writel(S3C_SSR_RESUME, hsudc->regs + S3C_SSR);
+			if (hsudc->gadget.speed != USB_SPEED_UNKNOWN
+				&& hsudc->driver && hsudc->driver->resume)
+				hsudc->driver->resume(&hsudc->gadget);
+		}
+
+		if (sys_status & S3C_SSR_RESET) {
+			writel(S3C_SSR_RESET, hsudc->regs + S3C_SSR);
+			for (ep_idx = 0; ep_idx < hsudc->pd->epnum; ep_idx++) {
+				hsep = &hsudc->ep[ep_idx];
+				hsep->stopped = 1;
+				s3c_hsudc_nuke_ep(hsep, -ECONNRESET);
+			}
+			s3c_hsudc_reconfig(hsudc);
+			hsudc->ep0state = WAIT_FOR_SETUP;
+		}
+	}
+
+	if (ep_intr & S3C_EIR_EP0) {
+		writel(S3C_EIR_EP0, hsudc->regs + S3C_EIR);
+		set_index(hsudc, 0);
+		s3c_hsudc_handle_ep0_intr(hsudc);
+	}
+
+	ep_intr >>= 1;
+	ep_idx = 1;
+	while (ep_intr) {
+		if (ep_intr & 1)  {
+			hsep = &hsudc->ep[ep_idx];
+			set_index(hsudc, ep_idx);
+			writel(1 << ep_idx, hsudc->regs + S3C_EIR);
+			if (ep_is_in(hsep))
+				s3c_hsudc_epin_intr(hsudc, ep_idx);
+			else
+				s3c_hsudc_epout_intr(hsudc, ep_idx);
+		}
+		ep_intr >>= 1;
+		ep_idx++;
+	}
+
+	spin_unlock(&hsudc->lock);
+	return IRQ_HANDLED;
+}
+
+static int s3c_hsudc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+	int ret;
+
+	if (!driver
+		|| driver->max_speed < USB_SPEED_FULL
+		|| !driver->setup)
+		return -EINVAL;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (hsudc->driver)
+		return -EBUSY;
+
+	hsudc->driver = driver;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies),
+				    hsudc->supplies);
+	if (ret != 0) {
+		dev_err(hsudc->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	/* connect to bus through transceiver */
+	if (!IS_ERR_OR_NULL(hsudc->transceiver)) {
+		ret = otg_set_peripheral(hsudc->transceiver->otg,
+					&hsudc->gadget);
+		if (ret) {
+			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
+					hsudc->gadget.name);
+			goto err_otg;
+		}
+	}
+
+	enable_irq(hsudc->irq);
+	s3c_hsudc_reconfig(hsudc);
+
+	pm_runtime_get_sync(hsudc->dev);
+
+	s3c_hsudc_init_phy();
+	if (hsudc->pd->gpio_init)
+		hsudc->pd->gpio_init();
+
+	return 0;
+err_otg:
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+err_supplies:
+	hsudc->driver = NULL;
+	return ret;
+}
+
+static int s3c_hsudc_stop(struct usb_gadget *gadget)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+	unsigned long flags;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	spin_lock_irqsave(&hsudc->lock, flags);
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+	s3c_hsudc_uninit_phy();
+
+	pm_runtime_put(hsudc->dev);
+
+	if (hsudc->pd->gpio_uninit)
+		hsudc->pd->gpio_uninit();
+	s3c_hsudc_stop_activity(hsudc);
+	spin_unlock_irqrestore(&hsudc->lock, flags);
+
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		(void) otg_set_peripheral(hsudc->transceiver->otg, NULL);
+
+	disable_irq(hsudc->irq);
+
+	regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
+	hsudc->driver = NULL;
+
+	return 0;
+}
+
+static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc)
+{
+	return readl(hsudc->regs + S3C_FNR) & 0x3FF;
+}
+
+static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
+{
+	return s3c_hsudc_read_frameno(to_hsudc(gadget));
+}
+
+static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct s3c_hsudc *hsudc = to_hsudc(gadget);
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		return usb_phy_set_power(hsudc->transceiver, mA);
+
+	return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops s3c_hsudc_gadget_ops = {
+	.get_frame	= s3c_hsudc_gadget_getframe,
+	.udc_start	= s3c_hsudc_start,
+	.udc_stop	= s3c_hsudc_stop,
+	.vbus_draw	= s3c_hsudc_vbus_draw,
+};
+
+static int s3c_hsudc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct s3c_hsudc *hsudc;
+	struct s3c24xx_hsudc_platdata *pd = dev_get_platdata(&pdev->dev);
+	int ret, i;
+
+	hsudc = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsudc) +
+			sizeof(struct s3c_hsudc_ep) * pd->epnum,
+			GFP_KERNEL);
+	if (!hsudc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	hsudc->dev = dev;
+	hsudc->pd = dev_get_platdata(&pdev->dev);
+
+	hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
+		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+				 hsudc->supplies);
+	if (ret != 0) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	hsudc->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(hsudc->regs)) {
+		ret = PTR_ERR(hsudc->regs);
+		goto err_res;
+	}
+
+	spin_lock_init(&hsudc->lock);
+
+	hsudc->gadget.max_speed = USB_SPEED_HIGH;
+	hsudc->gadget.ops = &s3c_hsudc_gadget_ops;
+	hsudc->gadget.name = dev_name(dev);
+	hsudc->gadget.ep0 = &hsudc->ep[0].ep;
+	hsudc->gadget.is_otg = 0;
+	hsudc->gadget.is_a_peripheral = 0;
+	hsudc->gadget.speed = USB_SPEED_UNKNOWN;
+
+	s3c_hsudc_setup_ep(hsudc);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "unable to obtain IRQ number\n");
+		goto err_res;
+	}
+	hsudc->irq = ret;
+
+	ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0,
+				driver_name, hsudc);
+	if (ret < 0) {
+		dev_err(dev, "irq request failed\n");
+		goto err_res;
+	}
+
+	hsudc->uclk = devm_clk_get(&pdev->dev, "usb-device");
+	if (IS_ERR(hsudc->uclk)) {
+		dev_err(dev, "failed to find usb-device clock source\n");
+		ret = PTR_ERR(hsudc->uclk);
+		goto err_res;
+	}
+	clk_enable(hsudc->uclk);
+
+	local_irq_disable();
+
+	disable_irq(hsudc->irq);
+	local_irq_enable();
+
+	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	pm_runtime_enable(dev);
+
+	return 0;
+err_add_udc:
+	clk_disable(hsudc->uclk);
+err_res:
+	if (!IS_ERR_OR_NULL(hsudc->transceiver))
+		usb_put_phy(hsudc->transceiver);
+
+err_supplies:
+	return ret;
+}
+
+static struct platform_driver s3c_hsudc_driver = {
+	.driver		= {
+		.name	= "s3c-hsudc",
+	},
+	.probe		= s3c_hsudc_probe,
+};
+
+module_platform_driver(s3c_hsudc_driver);
+
+MODULE_DESCRIPTION("Samsung S3C24XX USB high-speed controller driver");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c-hsudc");