Initial import

1 files changed, 398 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 000000000..2af32e26f
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,398 @@
+/*
+ * xHCI host controller driver PCI Bus Glue.
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+
+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
+
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_EJ168		0x7023
+
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
+
+static const char hcd_name[] = "xhci_hcd";
+
+static struct hc_driver __read_mostly xhci_pci_hc_driver;
+
+/* called after powerup, by probe or system-pm "wakeup" */
+static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
+{
+	/*
+	 * TODO: Implement finding debug ports later.
+	 * TODO: see if there are any quirks that need to be added to handle
+	 * new extended capabilities.
+	 */
+
+	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
+	if (!pci_set_mwi(pdev))
+		xhci_dbg(xhci, "MWI active\n");
+
+	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
+	return 0;
+}
+
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+	struct pci_dev		*pdev = to_pci_dev(dev);
+
+	/* Look for vendor-specific quirks */
+	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
+			xhci->quirks |= XHCI_RESET_EP_QUIRK;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic xHC needs configure"
+				" endpoint cmd after reset endpoint");
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x4) {
+			xhci->quirks |= XHCI_SLOW_SUSPEND;
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic xHC revision %u"
+				"must be suspended extra slowly",
+				pdev->revision);
+		}
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
+			xhci->quirks |= XHCI_BROKEN_STREAMS;
+		/* Fresco Logic confirms: all revisions of this chip do not
+		 * support MSI, even though some of them claim to in their PCI
+		 * capabilities.
+		 */
+		xhci->quirks |= XHCI_BROKEN_MSI;
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Fresco Logic revision %u "
+				"has broken MSI implementation",
+				pdev->revision);
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+	}
+
+	if (pdev->vendor == PCI_VENDOR_ID_NEC)
+		xhci->quirks |= XHCI_NEC_HOST;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_INTEL_HOST;
+		xhci->quirks |= XHCI_AVOID_BEI;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+		xhci->limit_active_eps = 64;
+		xhci->quirks |= XHCI_SW_BW_CHECKING;
+		/*
+		 * PPT desktop boards DH77EB and DH77DF will power back on after
+		 * a few seconds of being shutdown.  The fix for this is to
+		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
+		 * DMI information to find those particular boards (since each
+		 * vendor will change the board name), so we have to key off all
+		 * PPT chipsets.
+		 */
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
+		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_EJ168) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+	}
+	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+			pdev->device == 0x0015)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
+			pdev->device == 0x3432)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+			pdev->device == 0x1042)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
+
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Resetting on resume");
+}
+
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci;
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
+
+	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
+	if (retval)
+		return retval;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return 0;
+
+	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
+	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
+
+	/* Find any debug ports */
+	retval = xhci_pci_reinit(xhci, pdev);
+	if (!retval)
+		return retval;
+
+	kfree(xhci);
+	return retval;
+}
+
+/*
+ * We need to register our own PCI probe function (instead of the USB core's
+ * function) in order to create a second roothub under xHCI.
+ */
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int retval;
+	struct xhci_hcd *xhci;
+	struct hc_driver *driver;
+	struct usb_hcd *hcd;
+
+	driver = (struct hc_driver *)id->driver_data;
+
+	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
+	pm_runtime_get_noresume(&dev->dev);
+
+	/* Register the USB 2.0 roothub.
+	 * FIXME: USB core must know to register the USB 2.0 roothub first.
+	 * This is sort of silly, because we could just set the HCD driver flags
+	 * to say USB 2.0, but I'm not sure what the implications would be in
+	 * the other parts of the HCD code.
+	 */
+	retval = usb_hcd_pci_probe(dev, id);
+
+	if (retval)
+		goto put_runtime_pm;
+
+	/* USB 2.0 roothub is stored in the PCI device now. */
+	hcd = dev_get_drvdata(&dev->dev);
+	xhci = hcd_to_xhci(hcd);
+	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
+				pci_name(dev), hcd);
+	if (!xhci->shared_hcd) {
+		retval = -ENOMEM;
+		goto dealloc_usb2_hcd;
+	}
+
+	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
+	 * is called by usb_add_hcd().
+	 */
+	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
+
+	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
+			IRQF_SHARED);
+	if (retval)
+		goto put_usb3_hcd;
+	/* Roothub already marked as USB 3.0 speed */
+
+	if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
+			HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
+	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
+	pm_runtime_put_noidle(&dev->dev);
+
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(xhci->shared_hcd);
+dealloc_usb2_hcd:
+	usb_hcd_pci_remove(dev);
+put_runtime_pm:
+	pm_runtime_put_noidle(&dev->dev);
+	return retval;
+}
+
+static void xhci_pci_remove(struct pci_dev *dev)
+{
+	struct xhci_hcd *xhci;
+
+	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+	if (xhci->shared_hcd) {
+		usb_remove_hcd(xhci->shared_hcd);
+		usb_put_hcd(xhci->shared_hcd);
+	}
+	usb_hcd_pci_remove(dev);
+
+	/* Workaround for spurious wakeups at shutdown with HSW */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+		pci_set_power_state(dev, PCI_D3hot);
+
+	kfree(xhci);
+}
+
+#ifdef CONFIG_PM
+static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+		pdev->no_d3cold = true;
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
+	return xhci_suspend(xhci, do_wakeup);
+}
+
+static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval = 0;
+
+	/* The BIOS on systems with the Intel Panther Point chipset may or may
+	 * not support xHCI natively.  That means that during system resume, it
+	 * may switch the ports back to EHCI so that users can use their
+	 * keyboard to select a kernel from GRUB after resume from hibernate.
+	 *
+	 * The BIOS is supposed to remember whether the OS had xHCI ports
+	 * enabled before resume, and switch the ports back to xHCI when the
+	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+	 * writers.
+	 *
+	 * Unconditionally switch the ports back to xHCI after a system resume.
+	 * It should not matter whether the EHCI or xHCI controller is
+	 * resumed first. It's enough to do the switchover in xHCI because
+	 * USB core won't notice anything as the hub driver doesn't start
+	 * running again until after all the devices (including both EHCI and
+	 * xHCI host controllers) have been resumed.
+	 */
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
+
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
+	retval = xhci_resume(xhci, hibernated);
+	return retval;
+}
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids[] = { {
+	/* handle any USB 3.0 xHCI controller */
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
+	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
+	},
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver xhci_pci_driver = {
+	.name =		(char *) hcd_name,
+	.id_table =	pci_ids,
+
+	.probe =	xhci_pci_probe,
+	.remove =	xhci_pci_remove,
+	/* suspend and resume implemented later */
+
+	.shutdown = 	usb_hcd_pci_shutdown,
+#ifdef CONFIG_PM
+	.driver = {
+		.pm = &usb_hcd_pci_pm_ops
+	},
+#endif
+};
+
+static int __init xhci_pci_init(void)
+{
+	xhci_init_driver(&xhci_pci_hc_driver, xhci_pci_setup);
+#ifdef CONFIG_PM
+	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
+	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+#endif
+	return pci_register_driver(&xhci_pci_driver);
+}
+module_init(xhci_pci_init);
+
+static void __exit xhci_pci_exit(void)
+{
+	pci_unregister_driver(&xhci_pci_driver);
+}
+module_exit(xhci_pci_exit);
+
+MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
+MODULE_LICENSE("GPL");