Linux-libre 4.5-gnu

2 files changed, 150 insertions, 99 deletions

diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 306d6852e..8efbabacc 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2825,21 +2825,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig)
 		return -ENODEV;
 	}
 
-	switch (orig) {
-		case 0:
-			file->f_pos = offset;
-			ret = file->f_pos;
-			/* never negative, no force_successful_syscall needed */
-			break;
-		case 1:
-			file->f_pos += offset;
-			ret = file->f_pos;
-			/* never negative, no force_successful_syscall needed */
-			break;
-		default:
-			/* seeking relative to "end of file" is not supported */
-			ret = -EINVAL;
-	}
+	ret = no_seek_end_llseek(file, offset, orig);
 
 	mutex_unlock(&sisusb->lock);
 	return ret;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 637f3f7cf..92fdb6e9f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -22,18 +22,42 @@ static void complicated_callback(struct urb *urb);
 /*-------------------------------------------------------------------------*/
 
 /* FIXME make these public somewhere; usbdevfs.h? */
-struct usbtest_param {
+
+/* Parameter for usbtest driver. */
+struct usbtest_param_32 {
 	/* inputs */
-	unsigned		test_num;	/* 0..(TEST_CASES-1) */
-	unsigned		iterations;
-	unsigned		length;
-	unsigned		vary;
-	unsigned		sglen;
+	__u32		test_num;	/* 0..(TEST_CASES-1) */
+	__u32		iterations;
+	__u32		length;
+	__u32		vary;
+	__u32		sglen;
 
 	/* outputs */
-	struct timeval		duration;
+	__s32		duration_sec;
+	__s32		duration_usec;
 };
-#define USBTEST_REQUEST	_IOWR('U', 100, struct usbtest_param)
+
+/*
+ * Compat parameter to the usbtest driver.
+ * This supports older user space binaries compiled with 64 bit compiler.
+ */
+struct usbtest_param_64 {
+	/* inputs */
+	__u32		test_num;	/* 0..(TEST_CASES-1) */
+	__u32		iterations;
+	__u32		length;
+	__u32		vary;
+	__u32		sglen;
+
+	/* outputs */
+	__s64		duration_sec;
+	__s64		duration_usec;
+};
+
+/* IOCTL interface to the driver. */
+#define USBTEST_REQUEST_32    _IOWR('U', 100, struct usbtest_param_32)
+/* COMPAT IOCTL interface to the driver. */
+#define USBTEST_REQUEST_64    _IOWR('U', 100, struct usbtest_param_64)
 
 /*-------------------------------------------------------------------------*/
 
@@ -1030,7 +1054,7 @@ struct ctrl_ctx {
 	unsigned		pending;
 	int			status;
 	struct urb		**urb;
-	struct usbtest_param	*param;
+	struct usbtest_param_32	*param;
 	int			last;
 };
 
@@ -1155,7 +1179,7 @@ error:
 }
 
 static int
-test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
+test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param)
 {
 	struct usb_device	*udev = testdev_to_usbdev(dev);
 	struct urb		**urb;
@@ -1849,7 +1873,7 @@ static void complicated_callback(struct urb *urb)
 			goto done;
 		default:
 			dev_err(&ctx->dev->intf->dev,
-					"iso resubmit err %d\n",
+					"resubmit err %d\n",
 					status);
 			/* FALLTHROUGH */
 		case -ENODEV:			/* disconnected */
@@ -1863,7 +1887,7 @@ static void complicated_callback(struct urb *urb)
 	if (ctx->pending == 0) {
 		if (ctx->errors)
 			dev_err(&ctx->dev->intf->dev,
-				"iso test, %lu errors out of %lu\n",
+				"during the test, %lu errors out of %lu\n",
 				ctx->errors, ctx->packet_count);
 		complete(&ctx->done);
 	}
@@ -1930,7 +1954,7 @@ static struct urb *iso_alloc_urb(
 }
 
 static int
-test_queue(struct usbtest_dev *dev, struct usbtest_param *param,
+test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param,
 		int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
 {
 	struct transfer_context	context;
@@ -2049,81 +2073,20 @@ static int test_unaligned_bulk(
 	return retval;
 }
 
-/*-------------------------------------------------------------------------*/
-
-/* We only have this one interface to user space, through usbfs.
- * User mode code can scan usbfs to find N different devices (maybe on
- * different busses) to use when testing, and allocate one thread per
- * test.  So discovery is simplified, and we have no device naming issues.
- *
- * Don't use these only as stress/load tests.  Use them along with with
- * other USB bus activity:  plugging, unplugging, mousing, mp3 playback,
- * video capture, and so on.  Run different tests at different times, in
- * different sequences.  Nothing here should interact with other devices,
- * except indirectly by consuming USB bandwidth and CPU resources for test
- * threads and request completion.  But the only way to know that for sure
- * is to test when HC queues are in use by many devices.
- *
- * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
- * it locks out usbcore in certain code paths.  Notably, if you disconnect
- * the device-under-test, hub_wq will wait block forever waiting for the
- * ioctl to complete ... so that usb_disconnect() can abort the pending
- * urbs and then call usbtest_disconnect().  To abort a test, you're best
- * off just killing the userspace task and waiting for it to exit.
- */
-
+/* Run tests. */
 static int
-usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
+usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param)
 {
 	struct usbtest_dev	*dev = usb_get_intfdata(intf);
 	struct usb_device	*udev = testdev_to_usbdev(dev);
-	struct usbtest_param	*param = buf;
-	int			retval = -EOPNOTSUPP;
 	struct urb		*urb;
 	struct scatterlist	*sg;
 	struct usb_sg_request	req;
-	struct timeval		start;
 	unsigned		i;
-
-	/* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
-
-	pattern = mod_pattern;
-
-	if (code != USBTEST_REQUEST)
-		return -EOPNOTSUPP;
+	int	retval = -EOPNOTSUPP;
 
 	if (param->iterations <= 0)
 		return -EINVAL;
-
-	if (param->sglen > MAX_SGLEN)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&dev->lock))
-		return -ERESTARTSYS;
-
-	/* FIXME: What if a system sleep starts while a test is running? */
-
-	/* some devices, like ez-usb default devices, need a non-default
-	 * altsetting to have any active endpoints.  some tests change
-	 * altsettings; force a default so most tests don't need to check.
-	 */
-	if (dev->info->alt >= 0) {
-		int	res;
-
-		if (intf->altsetting->desc.bInterfaceNumber) {
-			mutex_unlock(&dev->lock);
-			return -ENODEV;
-		}
-		res = set_altsetting(dev, dev->info->alt);
-		if (res) {
-			dev_err(&intf->dev,
-					"set altsetting to %d failed, %d\n",
-					dev->info->alt, res);
-			mutex_unlock(&dev->lock);
-			return res;
-		}
-	}
-
 	/*
 	 * Just a bunch of test cases that every HCD is expected to handle.
 	 *
@@ -2133,7 +2096,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 	 * FIXME add more tests!  cancel requests, verify the data, control
 	 * queueing, concurrent read+write threads, and so on.
 	 */
-	do_gettimeofday(&start);
 	switch (param->test_num) {
 
 	case 0:
@@ -2548,13 +2510,116 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 				dev->in_pipe, NULL, 0);
 		break;
 	}
-	do_gettimeofday(&param->duration);
-	param->duration.tv_sec -= start.tv_sec;
-	param->duration.tv_usec -= start.tv_usec;
-	if (param->duration.tv_usec < 0) {
-		param->duration.tv_usec += 1000 * 1000;
-		param->duration.tv_sec -= 1;
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We only have this one interface to user space, through usbfs.
+ * User mode code can scan usbfs to find N different devices (maybe on
+ * different busses) to use when testing, and allocate one thread per
+ * test.  So discovery is simplified, and we have no device naming issues.
+ *
+ * Don't use these only as stress/load tests.  Use them along with with
+ * other USB bus activity:  plugging, unplugging, mousing, mp3 playback,
+ * video capture, and so on.  Run different tests at different times, in
+ * different sequences.  Nothing here should interact with other devices,
+ * except indirectly by consuming USB bandwidth and CPU resources for test
+ * threads and request completion.  But the only way to know that for sure
+ * is to test when HC queues are in use by many devices.
+ *
+ * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths.  Notably, if you disconnect
+ * the device-under-test, hub_wq will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect().  To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
+ */
+
+static int
+usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
+{
+
+	struct usbtest_dev	*dev = usb_get_intfdata(intf);
+	struct usbtest_param_64 *param_64 = buf;
+	struct usbtest_param_32 temp;
+	struct usbtest_param_32 *param_32 = buf;
+	struct timespec64 start;
+	struct timespec64 end;
+	struct timespec64 duration;
+	int retval = -EOPNOTSUPP;
+
+	/* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
+
+	pattern = mod_pattern;
+
+	if (mutex_lock_interruptible(&dev->lock))
+		return -ERESTARTSYS;
+
+	/* FIXME: What if a system sleep starts while a test is running? */
+
+	/* some devices, like ez-usb default devices, need a non-default
+	 * altsetting to have any active endpoints.  some tests change
+	 * altsettings; force a default so most tests don't need to check.
+	 */
+	if (dev->info->alt >= 0) {
+		if (intf->altsetting->desc.bInterfaceNumber) {
+			retval = -ENODEV;
+			goto free_mutex;
+		}
+		retval = set_altsetting(dev, dev->info->alt);
+		if (retval) {
+			dev_err(&intf->dev,
+					"set altsetting to %d failed, %d\n",
+					dev->info->alt, retval);
+			goto free_mutex;
+		}
+	}
+
+	switch (code) {
+	case USBTEST_REQUEST_64:
+		temp.test_num = param_64->test_num;
+		temp.iterations = param_64->iterations;
+		temp.length = param_64->length;
+		temp.sglen = param_64->sglen;
+		temp.vary = param_64->vary;
+		param_32 = &temp;
+		break;
+
+	case USBTEST_REQUEST_32:
+		break;
+
+	default:
+		retval = -EOPNOTSUPP;
+		goto free_mutex;
+	}
+
+	ktime_get_ts64(&start);
+
+	retval = usbtest_do_ioctl(intf, param_32);
+	if (retval)
+		goto free_mutex;
+
+	ktime_get_ts64(&end);
+
+	duration = timespec64_sub(end, start);
+
+	temp.duration_sec = duration.tv_sec;
+	temp.duration_usec = duration.tv_nsec/NSEC_PER_USEC;
+
+	switch (code) {
+	case USBTEST_REQUEST_32:
+		param_32->duration_sec = temp.duration_sec;
+		param_32->duration_usec = temp.duration_usec;
+		break;
+
+	case USBTEST_REQUEST_64:
+		param_64->duration_sec = temp.duration_sec;
+		param_64->duration_usec = temp.duration_usec;
+		break;
 	}
+
+free_mutex:
 	mutex_unlock(&dev->lock);
 	return retval;
 }