Linux-libre 4.6.2-gnu

4 files changed, 20 insertions, 66 deletions

diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 39b424f7f..a262a4343 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -5,7 +5,6 @@
 #include <linux/usb/usb_phy_generic.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
-#include <linux/regulator/consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/usb/of.h>
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 5320cb864..980c9dee0 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -118,7 +118,8 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
 		status = USB_EVENT_VBUS;
 		otg->state = OTG_STATE_B_PERIPHERAL;
 		nop->phy.last_event = status;
-		usb_gadget_vbus_connect(otg->gadget);
+		if (otg->gadget)
+			usb_gadget_vbus_connect(otg->gadget);
 
 		/* drawing a "unit load" is *always* OK, except for OTG */
 		nop_set_vbus_draw(nop, 100);
@@ -128,7 +129,8 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
 	} else {
 		nop_set_vbus_draw(nop, 0);
 
-		usb_gadget_vbus_disconnect(otg->gadget);
+		if (otg->gadget)
+			usb_gadget_vbus_disconnect(otg->gadget);
 		status = USB_EVENT_NONE;
 		otg->state = OTG_STATE_B_IDLE;
 		nop->phy.last_event = status;
@@ -184,7 +186,10 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
 	}
 
 	otg->gadget = gadget;
-	otg->state = OTG_STATE_B_IDLE;
+	if (otg->state == OTG_STATE_B_PERIPHERAL)
+		usb_gadget_vbus_connect(gadget);
+	else
+		otg->state = OTG_STATE_B_IDLE;
 	return 0;
 }
 
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 3af263cc0..8d111ec65 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -258,7 +258,7 @@ static void power_down(struct isp1301 *isp)
 	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
 }
 
-static void power_up(struct isp1301 *isp)
+static void __maybe_unused power_up(struct isp1301 *isp)
 {
 	// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
 	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index 579587d97..3d7af85ae 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -65,9 +65,7 @@ struct phy_8x16 {
 	void __iomem			*regs;
 	struct clk			*core_clk;
 	struct clk			*iface_clk;
-	struct regulator		*v3p3;
-	struct regulator		*v1p8;
-	struct regulator		*vdd;
+	struct regulator_bulk_data	regulator[3];
 
 	struct reset_control		*phy_reset;
 
@@ -78,51 +76,6 @@ struct phy_8x16 {
 	struct notifier_block		reboot_notify;
 };
 
-static int phy_8x16_regulators_enable(struct phy_8x16 *qphy)
-{
-	int ret;
-
-	ret = regulator_set_voltage(qphy->vdd, HSPHY_VDD_MIN, HSPHY_VDD_MAX);
-	if (ret)
-		return ret;
-
-	ret = regulator_enable(qphy->vdd);
-	if (ret)
-		return ret;
-
-	ret = regulator_set_voltage(qphy->v3p3, HSPHY_3P3_MIN, HSPHY_3P3_MAX);
-	if (ret)
-		goto off_vdd;
-
-	ret = regulator_enable(qphy->v3p3);
-	if (ret)
-		goto off_vdd;
-
-	ret = regulator_set_voltage(qphy->v1p8, HSPHY_1P8_MIN, HSPHY_1P8_MAX);
-	if (ret)
-		goto off_3p3;
-
-	ret = regulator_enable(qphy->v1p8);
-	if (ret)
-		goto off_3p3;
-
-	return 0;
-
-off_3p3:
-	regulator_disable(qphy->v3p3);
-off_vdd:
-	regulator_disable(qphy->vdd);
-
-	return ret;
-}
-
-static void phy_8x16_regulators_disable(struct phy_8x16 *qphy)
-{
-	regulator_disable(qphy->v1p8);
-	regulator_disable(qphy->v3p3);
-	regulator_disable(qphy->vdd);
-}
-
 static int phy_8x16_notify_connect(struct usb_phy *phy,
 				   enum usb_device_speed speed)
 {
@@ -261,7 +214,6 @@ static void phy_8x16_shutdown(struct usb_phy *phy)
 
 static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
 {
-	struct regulator_bulk_data regs[3];
 	struct device *dev = qphy->phy.dev;
 	int ret;
 
@@ -273,18 +225,15 @@ static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
 	if (IS_ERR(qphy->iface_clk))
 		return PTR_ERR(qphy->iface_clk);
 
-	regs[0].supply = "v3p3";
-	regs[1].supply = "v1p8";
-	regs[2].supply = "vddcx";
+	qphy->regulator[0].supply = "v3p3";
+	qphy->regulator[1].supply = "v1p8";
+	qphy->regulator[2].supply = "vddcx";
 
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(regs), regs);
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator),
+				      qphy->regulator);
 	if (ret)
 		return ret;
 
-	qphy->v3p3 = regs[0].consumer;
-	qphy->v1p8 = regs[1].consumer;
-	qphy->vdd  = regs[2].consumer;
-
 	qphy->phy_reset = devm_reset_control_get(dev, "phy");
 	if (IS_ERR(qphy->phy_reset))
 		return PTR_ERR(qphy->phy_reset);
@@ -364,8 +313,9 @@ static int phy_8x16_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto off_core;
 
-	ret = phy_8x16_regulators_enable(qphy);
-	if (0 && ret)
+	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator),
+				    qphy->regulator);
+	if (WARN_ON(ret))
 		goto off_clks;
 
 	qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
@@ -387,7 +337,7 @@ off_extcon:
 	extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
 				   &qphy->vbus_notify);
 off_power:
-	phy_8x16_regulators_disable(qphy);
+	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
 off_clks:
 	clk_disable_unprepare(qphy->iface_clk);
 off_core:
@@ -413,7 +363,7 @@ static int phy_8x16_remove(struct platform_device *pdev)
 
 	clk_disable_unprepare(qphy->iface_clk);
 	clk_disable_unprepare(qphy->core_clk);
-	phy_8x16_regulators_disable(qphy);
+	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
 	return 0;
 }