Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 30 insertions, 21 deletions

diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 39afd7045..fba4005dd 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1,4 +1,5 @@
-/* Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
+/*
+ * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
  *
  * Current development and maintenance:
  *   (C) 2001-2002 Björn Stenberg (bjorn@haxx.se)
@@ -628,7 +629,8 @@ static void isd200_invoke_transport( struct us_data *us,
 	srb->cmd_len = sizeof(ataCdb->generic);
 	transferStatus = usb_stor_Bulk_transport(srb, us);
 
-	/* if the command gets aborted by the higher layers, we need to
+	/*
+	 * if the command gets aborted by the higher layers, we need to
 	 * short-circuit all other processing
 	 */
 	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
@@ -695,15 +697,18 @@ static void isd200_invoke_transport( struct us_data *us,
 		}
 	}
 
-	/* Regardless of auto-sense, if we _know_ we have an error
+	/*
+	 * Regardless of auto-sense, if we _know_ we have an error
 	 * condition, show that in the result code
 	 */
 	if (transferStatus == USB_STOR_TRANSPORT_FAILED)
 		srb->result = SAM_STAT_CHECK_CONDITION;
 	return;
 
-	/* abort processing: the bulk-only transport requires a reset
-	 * following an abort */
+	/*
+	 * abort processing: the bulk-only transport requires a reset
+	 * following an abort
+	 */
 	Handle_Abort:
 	srb->result = DID_ABORT << 16;
 
@@ -965,20 +970,22 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave,
 			info->DeviceHead = master_slave;
 			break;
 		} 
-		/* check Cylinder High/Low to
-		   determine if it is an ATAPI device
-		*/
+		/*
+		 * check Cylinder High/Low to
+		 * determine if it is an ATAPI device
+		 */
 		else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
 			 regs[ATA_REG_LCYL_OFFSET] == 0x14) {
-			/* It seems that the RICOH 
-			   MP6200A CD/RW drive will 
-			   report itself okay as a
-			   slave when it is really a
-			   master. So this check again
-			   as a master device just to
-			   make sure it doesn't report
-			   itself okay as a master also
-			*/
+			/*
+			 * It seems that the RICOH
+			 * MP6200A CD/RW drive will
+			 * report itself okay as a
+			 * slave when it is really a
+			 * master. So this check again
+			 * as a master device just to
+			 * make sure it doesn't report
+			 * itself okay as a master also
+			 */
 			if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) &&
 			    !recheckAsMaster) {
 				usb_stor_dbg(us, "   Identified ATAPI device as slave.  Rechecking again as master\n");
@@ -1176,9 +1183,11 @@ static int isd200_get_inquiry_data( struct us_data *us )
 				if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) {
 					usb_stor_dbg(us, "   Device supports Media Status Notification\n");
 
-					/* Indicate that it is enabled, even though it is not
-					 * This allows the lock/unlock of the media to work
-					 * correctly.
+					/*
+					 * Indicate that it is enabled, even
+					 * though it is not.
+					 * This allows the lock/unlock of the
+					 * media to work correctly.
 					 */
 					info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED;
 				}
@@ -1197,7 +1206,7 @@ static int isd200_get_inquiry_data( struct us_data *us )
 			usb_stor_dbg(us, "Protocol changed to: %s\n",
 				     us->protocol_name);
 	    
-			/* Free driver structure */	    
+			/* Free driver structure */
 			us->extra_destructor(info);
 			kfree(info);
 			us->extra = NULL;