Linux-libre 4.2.4-gnupck-4.2.4-gnu

14 files changed, 259 insertions, 133 deletions

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 389f0e034..fa774323e 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -56,7 +56,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
 	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
 	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
-	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 764f668d4..6e53c24fa 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
 	return 0;
 }
 
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	if (value && hwep->dir == TX && check_transfer &&
+		!list_empty(&hwep->qh.queue) &&
+			!usb_endpoint_xfer_control(hwep->ep.desc)) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EAGAIN;
+	}
+
+	direction = hwep->dir;
+	do {
+		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+		if (!value)
+			hwep->wedge = 0;
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+
 /**
  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
  * @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
 				num += ci->hw_ep_max / 2;
 
 			spin_unlock(&ci->lock);
-			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+			err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
 			spin_lock(&ci->lock);
 			if (!err)
 				isr_setup_status_phase(ci);
@@ -1110,8 +1148,8 @@ delegate:
 
 	if (err < 0) {
 		spin_unlock(&ci->lock);
-		if (usb_ep_set_halt(&hwep->ep))
-			dev_err(ci->dev, "error: ep_set_halt\n");
+		if (_ep_set_halt(&hwep->ep, 1, false))
+			dev_err(ci->dev, "error: _ep_set_halt\n");
 		spin_lock(&ci->lock);
 	}
 }
@@ -1142,9 +1180,9 @@ __acquires(ci->lock)
 					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					spin_unlock(&ci->lock);
-					if (usb_ep_set_halt(&hwep->ep))
+					if (_ep_set_halt(&hwep->ep, 1, false))
 						dev_err(ci->dev,
-							"error: ep_set_halt\n");
+						"error: _ep_set_halt\n");
 					spin_lock(&ci->lock);
 				}
 			}
@@ -1390,41 +1428,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
  */
 static int ep_set_halt(struct usb_ep *ep, int value)
 {
-	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	if (ep == NULL || hwep->ep.desc == NULL)
-		return -EINVAL;
-
-	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
-	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
-	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
-	    !list_empty(&hwep->qh.queue)) {
-		spin_unlock_irqrestore(hwep->lock, flags);
-		return -EAGAIN;
-	}
-#endif
-
-	direction = hwep->dir;
-	do {
-		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
-		if (!value)
-			hwep->wedge = 0;
-
-		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
-			hwep->dir = (hwep->dir == TX) ? RX : TX;
-
-	} while (hwep->dir != direction);
-
-	spin_unlock_irqrestore(hwep->lock, flags);
-	return retval;
+	return _ep_set_halt(ep, value, true);
 }
 
 /**
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b2a540b43..b9ddf0c1f 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 16;
 	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
-			desc->bmAttributes > 2) {
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 3\n", desc->bmAttributes + 1,
@@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	}
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
-		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
 			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = usb_endpoint_maxp(&ep->desc) *
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d85abfed8..f5a381945 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -54,6 +54,13 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
 	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Logitech ConferenceCam CC3000e */
+	{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
+
+	/* Logitech PTZ Pro Camera */
+	{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -78,6 +85,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Plantronic Audio 655 DSP */
+	{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Plantronic Audio 648 USB */
+	{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Artisman Watchdog Dongle */
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936cd..41f841fa6 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 * use Event Data TRBs, and we don't chain in a link TRB on short
 	 * transfers, we're basically dividing by 1.
 	 *
-	 * xHCI 1.0 specification indicates that the Average TRB Length should
-	 * be set to 8 for control endpoints.
+	 * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+	 * should be set to 8 for control endpoints.
 	 */
-	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+	if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
 		ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
 	else
 		ep_ctx->tx_info |=
@@ -1792,8 +1792,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int size;
 	int i, j, num_ports;
 
-	if (timer_pending(&xhci->cmd_timer))
-		del_timer_sync(&xhci->cmd_timer);
+	del_timer_sync(&xhci->cmd_timer);
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -2321,6 +2320,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->cmd_list);
 
+	/* init command timeout timer */
+	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+		    (unsigned long)xhci);
+
 	page_size = readl(&xhci->op_regs->page_size);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Supported page size register = 0x%x", page_size);
@@ -2505,10 +2508,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			"Wrote ERST address to ir_set 0.");
 	xhci_print_ir_set(xhci, 0);
 
-	/* init command timeout timer */
-	setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
-		    (unsigned long)xhci);
-
 	/*
 	 * XXX: Might need to set the Interrupter Moderation Register to
 	 * something other than the default (~1ms minimum between interrupts).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5590eac2b..c79d33676 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -180,51 +180,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 				"QUIRK: Resetting on resume");
 }
 
-/*
- * In some Intel xHCI controllers, in order to get D3 working,
- * through a vendor specific SSIC CONFIG register at offset 0x883c,
- * SSIC PORT need to be marked as "unused" before putting xHCI
- * into D3. After D3 exit, the SSIC port need to be marked as "used".
- * Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
- */
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u32 val;
-	void __iomem *reg;
-
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
-		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
-
-		/* Notify SSIC that SSIC profile programming is not done */
-		val = readl(reg) & ~PROG_DONE;
-		writel(val, reg);
-
-		/* Mark SSIC port as unused(suspend) or used(resume) */
-		val = readl(reg);
-		if (suspend)
-			val |= SSIC_PORT_UNUSED;
-		else
-			val &= ~SSIC_PORT_UNUSED;
-		writel(val, reg);
-
-		/* Notify SSIC that SSIC profile programming is done */
-		val = readl(reg) | PROG_DONE;
-		writel(val, reg);
-		readl(reg);
-	}
-
-	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
-	val = readl(reg);
-	writel(val | BIT(28), reg);
-	readl(reg);
-}
-
 #ifdef CONFIG_ACPI
 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
 {
@@ -345,6 +300,51 @@ static void xhci_pci_remove(struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	u32 val;
+	void __iomem *reg;
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+		/* Notify SSIC that SSIC profile programming is not done */
+		val = readl(reg) & ~PROG_DONE;
+		writel(val, reg);
+
+		/* Mark SSIC port as unused(suspend) or used(resume) */
+		val = readl(reg);
+		if (suspend)
+			val |= SSIC_PORT_UNUSED;
+		else
+			val &= ~SSIC_PORT_UNUSED;
+		writel(val, reg);
+
+		/* Notify SSIC that SSIC profile programming is done */
+		val = readl(reg) | PROG_DONE;
+		writel(val, reg);
+		readl(reg);
+	}
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 32f4d5644..8aadf3def 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -302,6 +302,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
 	ret = xhci_handshake(&xhci->op_regs->cmd_ring,
 			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
 	if (ret < 0) {
+		/* we are about to kill xhci, give it one more chance */
+		xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+			      &xhci->op_regs->cmd_ring);
+		udelay(1000);
+		ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+				     CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
+		if (ret == 0)
+			return 0;
+
 		xhci_err(xhci, "Stopped the command ring failed, "
 				"maybe the host is dead\n");
 		xhci->xhc_state |= XHCI_STATE_DYING;
@@ -3041,9 +3050,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_td *td;
 	struct scatterlist *sg;
 	int num_sgs;
-	int trb_buff_len, this_sg_len, running_total;
+	int trb_buff_len, this_sg_len, running_total, ret;
 	unsigned int total_packet_count;
+	bool zero_length_needed;
 	bool first_trb;
+	int last_trb_num;
 	u64 addr;
 	bool more_trbs_coming;
 
@@ -3059,13 +3070,27 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	total_packet_count = DIV_ROUND_UP(urb->transfer_buffer_length,
 			usb_endpoint_maxp(&urb->ep->desc));
 
-	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
 			num_trbs, urb, 0, mem_flags);
-	if (trb_buff_len < 0)
-		return trb_buff_len;
+	if (ret < 0)
+		return ret;
 
 	urb_priv = urb->hcpriv;
+
+	/* Deal with URB_ZERO_PACKET - need one more td/trb */
+	zero_length_needed = urb->transfer_flags & URB_ZERO_PACKET &&
+		urb_priv->length == 2;
+	if (zero_length_needed) {
+		num_trbs++;
+		xhci_dbg(xhci, "Creating zero length td.\n");
+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
+				ep_index, urb->stream_id,
+				1, urb, 1, mem_flags);
+		if (ret < 0)
+			return ret;
+	}
+
 	td = urb_priv->td[0];
 
 	/*
@@ -3095,6 +3120,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		trb_buff_len = urb->transfer_buffer_length;
 
 	first_trb = true;
+	last_trb_num = zero_length_needed ? 2 : 1;
 	/* Queue the first TRB, even if it's zero-length */
 	do {
 		u32 field = 0;
@@ -3112,12 +3138,15 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		/* Chain all the TRBs together; clear the chain bit in the last
 		 * TRB to indicate it's the last TRB in the chain.
 		 */
-		if (num_trbs > 1) {
+		if (num_trbs > last_trb_num) {
 			field |= TRB_CHAIN;
-		} else {
-			/* FIXME - add check for ZERO_PACKET flag before this */
+		} else if (num_trbs == last_trb_num) {
 			td->last_trb = ep_ring->enqueue;
 			field |= TRB_IOC;
+		} else if (zero_length_needed && num_trbs == 1) {
+			trb_buff_len = 0;
+			urb_priv->td[1]->last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
 		}
 
 		/* Only set interrupt on short packet for IN endpoints */
@@ -3179,7 +3208,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		if (running_total + trb_buff_len > urb->transfer_buffer_length)
 			trb_buff_len =
 				urb->transfer_buffer_length - running_total;
-	} while (running_total < urb->transfer_buffer_length);
+	} while (num_trbs > 0);
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
@@ -3197,7 +3226,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int num_trbs;
 	struct xhci_generic_trb *start_trb;
 	bool first_trb;
+	int last_trb_num;
 	bool more_trbs_coming;
+	bool zero_length_needed;
 	int start_cycle;
 	u32 field, length_field;
 
@@ -3228,7 +3259,6 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		num_trbs++;
 		running_total += TRB_MAX_BUFF_SIZE;
 	}
-	/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
 
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
@@ -3237,6 +3267,20 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		return ret;
 
 	urb_priv = urb->hcpriv;
+
+	/* Deal with URB_ZERO_PACKET - need one more td/trb */
+	zero_length_needed = urb->transfer_flags & URB_ZERO_PACKET &&
+		urb_priv->length == 2;
+	if (zero_length_needed) {
+		num_trbs++;
+		xhci_dbg(xhci, "Creating zero length td.\n");
+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
+				ep_index, urb->stream_id,
+				1, urb, 1, mem_flags);
+		if (ret < 0)
+			return ret;
+	}
+
 	td = urb_priv->td[0];
 
 	/*
@@ -3258,7 +3302,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		trb_buff_len = urb->transfer_buffer_length;
 
 	first_trb = true;
-
+	last_trb_num = zero_length_needed ? 2 : 1;
 	/* Queue the first TRB, even if it's zero-length */
 	do {
 		u32 remainder = 0;
@@ -3275,12 +3319,15 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		/* Chain all the TRBs together; clear the chain bit in the last
 		 * TRB to indicate it's the last TRB in the chain.
 		 */
-		if (num_trbs > 1) {
+		if (num_trbs > last_trb_num) {
 			field |= TRB_CHAIN;
-		} else {
-			/* FIXME - add check for ZERO_PACKET flag before this */
+		} else if (num_trbs == last_trb_num) {
 			td->last_trb = ep_ring->enqueue;
 			field |= TRB_IOC;
+		} else if (zero_length_needed && num_trbs == 1) {
+			trb_buff_len = 0;
+			urb_priv->td[1]->last_trb = ep_ring->enqueue;
+			field |= TRB_IOC;
 		}
 
 		/* Only set interrupt on short packet for IN endpoints */
@@ -3318,7 +3365,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		trb_buff_len = urb->transfer_buffer_length - running_total;
 		if (trb_buff_len > TRB_MAX_BUFF_SIZE)
 			trb_buff_len = TRB_MAX_BUFF_SIZE;
-	} while (running_total < urb->transfer_buffer_length);
+	} while (num_trbs > 0);
 
 	check_trb_math(urb, num_trbs, running_total);
 	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
@@ -3385,8 +3432,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (start_cycle == 0)
 		field |= 0x1;
 
-	/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-	if (xhci->hci_version == 0x100) {
+	/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+	if (xhci->hci_version >= 0x100) {
 		if (urb->transfer_buffer_length > 0) {
 			if (setup->bRequestType & USB_DIR_IN)
 				field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 526ebc0c7..d7b9f484d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~XHCI_STATE_HALTED;
+		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+
 	return ret;
 }
 
@@ -654,15 +655,6 @@ int xhci_run(struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(xhci_run);
 
-static void xhci_only_stop_hcd(struct usb_hcd *hcd)
-{
-	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
-	spin_lock_irq(&xhci->lock);
-	xhci_halt(xhci);
-	spin_unlock_irq(&xhci->lock);
-}
-
 /*
  * Stop xHCI driver.
  *
@@ -677,12 +669,14 @@ void xhci_stop(struct usb_hcd *hcd)
 	u32 temp;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 
-	if (!usb_hcd_is_primary_hcd(hcd)) {
-		xhci_only_stop_hcd(xhci->shared_hcd);
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
 		return;
-	}
 
+	mutex_lock(&xhci->mutex);
 	spin_lock_irq(&xhci->lock);
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
 	/* Make sure the xHC is halted for a USB3 roothub
 	 * (xhci_stop() could be called as part of failed init).
 	 */
@@ -717,6 +711,7 @@ void xhci_stop(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"xhci_stop completed - status = %x",
 			readl(&xhci->op_regs->status));
+	mutex_unlock(&xhci->mutex);
 }
 
 /*
@@ -1340,6 +1335,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
 		size = urb->number_of_packets;
+	else if (usb_endpoint_is_bulk_out(&urb->ep->desc) &&
+	    urb->transfer_buffer_length > 0 &&
+	    urb->transfer_flags & URB_ZERO_PACKET &&
+	    !(urb->transfer_buffer_length % usb_endpoint_maxp(&urb->ep->desc)))
+		size = 2;
 	else
 		size = 1;
 
@@ -3788,6 +3788,9 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
+	if (xhci->xhc_state)	/* dying or halted */
+		goto out;
+
 	if (!udev->slot_id) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
 				"Bad Slot ID %d", udev->slot_id);
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index 3ad5d19e4..23c794813 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -472,7 +472,7 @@ static int chaoskey_rng_read(struct hwrng *rng, void *data,
 	if (this_time > max)
 		this_time = max;
 
-	memcpy(data, dev->buf, this_time);
+	memcpy(data, dev->buf + dev->used, this_time);
 
 	dev->used += this_time;
 
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 4d1b44c23..d07cafb7d 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -614,7 +614,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 {
 	struct musb *musb = controller->musb;
 	struct device *dev = musb->controller;
-	struct device_node *np = dev->of_node;
+	struct device_node *np = dev->parent->of_node;
 	struct cppi41_dma_channel *cppi41_channel;
 	int count;
 	int i;
@@ -664,7 +664,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
 		musb_dma->status = MUSB_DMA_STATUS_FREE;
 		musb_dma->max_len = SZ_4M;
 
-		dc = dma_request_slave_channel(dev, str);
+		dc = dma_request_slave_channel(dev->parent, str);
 		if (!dc) {
 			dev_err(dev, "Failed to request %s.\n", str);
 			ret = -EPROBE_DEFER;
@@ -695,7 +695,7 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base)
 	struct cppi41_dma_controller *controller;
 	int ret = 0;
 
-	if (!musb->controller->of_node) {
+	if (!musb->controller->parent->of_node) {
 		dev_err(musb->controller, "Need DT for the DMA engine.\n");
 		return NULL;
 	}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 1334a3de3..67325ec94 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,8 +225,11 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* start polling for ID change. */
-	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
+	/* start polling for ID change in dual-role idle mode */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index deee68eaf..0cd85f2cc 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -230,7 +230,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
 		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+			err = devm_gpio_request_one(dev, pdata->gpio_reset,
+						    GPIOF_ACTIVE_LOW,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 876423b88..7c8eb4c4c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -278,6 +278,10 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
+#define ZTE_PRODUCT_ZM8620_X			0x0396
+#define ZTE_PRODUCT_ME3620_MBIM			0x0426
+#define ZTE_PRODUCT_ME3620_X			0x1432
+#define ZTE_PRODUCT_ME3620_L			0x1433
 #define ZTE_PRODUCT_AC2726			0xfff1
 #define ZTE_PRODUCT_MG880			0xfffd
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
@@ -544,6 +548,18 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3),
 };
 
+static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
+	.reserved = BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_me3620_xl_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
+static const struct option_blacklist_info zte_zm8620_x_blacklist = {
+	.reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -1591,6 +1607,14 @@ static const struct usb_device_id option_ids[] = {
 	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+	 .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+	 .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b93131d8c..59cb91b2e 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -80,6 +80,8 @@ static int  whiteheat_firmware_download(struct usb_serial *serial,
 static int  whiteheat_firmware_attach(struct usb_serial *serial);
 
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_port_probe(struct usb_serial_port *port);
@@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = {
 	.description =		"Connect Tech - WhiteHEAT",
 	.id_table =		id_table_std,
 	.num_ports =		4,
+	.probe =		whiteheat_probe,
 	.attach =		whiteheat_attach,
 	.release =		whiteheat_release,
 	.port_probe =		whiteheat_port_probe,
@@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial)
 /*****************************************************************************
  * Connect Tech's White Heat serial driver functions
  *****************************************************************************/
+
+static int whiteheat_probe(struct usb_serial *serial,
+				const struct usb_device_id *id)
+{
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	size_t num_bulk_in = 0;
+	size_t num_bulk_out = 0;
+	size_t min_num_bulk;
+	unsigned int i;
+
+	iface_desc = serial->interface->cur_altsetting;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+		endpoint = &iface_desc->endpoint[i].desc;
+		if (usb_endpoint_is_bulk_in(endpoint))
+			++num_bulk_in;
+		if (usb_endpoint_is_bulk_out(endpoint))
+			++num_bulk_out;
+	}
+
+	min_num_bulk = COMMAND_PORT + 1;
+	if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int whiteheat_attach(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;