Initial import

1 files changed, 2240 insertions, 0 deletions

diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c
new file mode 100644
index 000000000..d0a4e2f79
--- /dev/null
+++ b/drivers/video/fbdev/sm501fb.c
@@ -0,0 +1,2240 @@
+/* linux/drivers/video/sm501fb.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Framebuffer driver for the Silicon Motion SM501
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include "edid.h"
+
+static char *fb_mode = "640x480-16@60";
+static unsigned long default_bpp = 16;
+
+static struct fb_videomode sm501_default_mode = {
+	.refresh	= 60,
+	.xres		= 640,
+	.yres		= 480,
+	.pixclock	= 20833,
+	.left_margin	= 142,
+	.right_margin	= 13,
+	.upper_margin	= 21,
+	.lower_margin	= 1,
+	.hsync_len	= 69,
+	.vsync_len	= 3,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+#define NR_PALETTE	256
+
+enum sm501_controller {
+	HEAD_CRT	= 0,
+	HEAD_PANEL	= 1,
+};
+
+/* SM501 memory address.
+ *
+ * This structure is used to track memory usage within the SM501 framebuffer
+ * allocation. The sm_addr field is stored as an offset as it is often used
+ * against both the physical and mapped addresses.
+ */
+struct sm501_mem {
+	unsigned long	 size;
+	unsigned long	 sm_addr;	/* offset from base of sm501 fb. */
+	void __iomem	*k_addr;
+};
+
+/* private data that is shared between all frambuffers* */
+struct sm501fb_info {
+	struct device		*dev;
+	struct fb_info		*fb[2];		/* fb info for both heads */
+	struct resource		*fbmem_res;	/* framebuffer resource */
+	struct resource		*regs_res;	/* registers resource */
+	struct resource		*regs2d_res;	/* 2d registers resource */
+	struct sm501_platdata_fb *pdata;	/* our platform data */
+
+	unsigned long		 pm_crt_ctrl;	/* pm: crt ctrl save */
+
+	int			 irq;
+	int			 swap_endian;	/* set to swap rgb=>bgr */
+	void __iomem		*regs;		/* remapped registers */
+	void __iomem		*regs2d;	/* 2d remapped registers */
+	void __iomem		*fbmem;		/* remapped framebuffer */
+	size_t			 fbmem_len;	/* length of remapped region */
+	u8 *edid_data;
+};
+
+/* per-framebuffer private data */
+struct sm501fb_par {
+	u32			 pseudo_palette[16];
+
+	enum sm501_controller	 head;
+	struct sm501_mem	 cursor;
+	struct sm501_mem	 screen;
+	struct fb_ops		 ops;
+
+	void			*store_fb;
+	void			*store_cursor;
+	void __iomem		*cursor_regs;
+	struct sm501fb_info	*info;
+};
+
+/* Helper functions */
+
+static inline int h_total(struct fb_var_screeninfo *var)
+{
+	return var->xres + var->left_margin +
+		var->right_margin + var->hsync_len;
+}
+
+static inline int v_total(struct fb_var_screeninfo *var)
+{
+	return var->yres + var->upper_margin +
+		var->lower_margin + var->vsync_len;
+}
+
+/* sm501fb_sync_regs()
+ *
+ * This call is mainly for PCI bus systems where we need to
+ * ensure that any writes to the bus are completed before the
+ * next phase, or after completing a function.
+*/
+
+static inline void sm501fb_sync_regs(struct sm501fb_info *info)
+{
+	smc501_readl(info->regs);
+}
+
+/* sm501_alloc_mem
+ *
+ * This is an attempt to lay out memory for the two framebuffers and
+ * everything else
+ *
+ * |fbmem_res->start					       fbmem_res->end|
+ * |									     |
+ * |fb[0].fix.smem_start    |	      |fb[1].fix.smem_start    |     2K	     |
+ * |-> fb[0].fix.smem_len <-| spare   |-> fb[1].fix.smem_len <-|-> cursors <-|
+ *
+ * The "spare" space is for the 2d engine data
+ * the fixed is space for the cursors (2x1Kbyte)
+ *
+ * we need to allocate memory for the 2D acceleration engine
+ * command list and the data for the engine to deal with.
+ *
+ * - all allocations must be 128bit aligned
+ * - cursors are 64x64x2 bits (1Kbyte)
+ *
+ */
+
+#define SM501_MEMF_CURSOR		(1)
+#define SM501_MEMF_PANEL		(2)
+#define SM501_MEMF_CRT			(4)
+#define SM501_MEMF_ACCEL		(8)
+
+static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
+			   unsigned int why, size_t size, u32 smem_len)
+{
+	struct sm501fb_par *par;
+	struct fb_info *fbi;
+	unsigned int ptr;
+	unsigned int end;
+
+	switch (why) {
+	case SM501_MEMF_CURSOR:
+		ptr = inf->fbmem_len - size;
+		inf->fbmem_len = ptr;	/* adjust available memory. */
+		break;
+
+	case SM501_MEMF_PANEL:
+		if (size > inf->fbmem_len)
+			return -ENOMEM;
+
+		ptr = inf->fbmem_len - size;
+		fbi = inf->fb[HEAD_CRT];
+
+		/* round down, some programs such as directfb do not draw
+		 * 0,0 correctly unless the start is aligned to a page start.
+		 */
+
+		if (ptr > 0)
+			ptr &= ~(PAGE_SIZE - 1);
+
+		if (fbi && ptr < smem_len)
+			return -ENOMEM;
+
+		break;
+
+	case SM501_MEMF_CRT:
+		ptr = 0;
+
+		/* check to see if we have panel memory allocated
+		 * which would put an limit on available memory. */
+
+		fbi = inf->fb[HEAD_PANEL];
+		if (fbi) {
+			par = fbi->par;
+			end = par->screen.k_addr ? par->screen.sm_addr : inf->fbmem_len;
+		} else
+			end = inf->fbmem_len;
+
+		if ((ptr + size) > end)
+			return -ENOMEM;
+
+		break;
+
+	case SM501_MEMF_ACCEL:
+		fbi = inf->fb[HEAD_CRT];
+		ptr = fbi ? smem_len : 0;
+
+		fbi = inf->fb[HEAD_PANEL];
+		if (fbi) {
+			par = fbi->par;
+			end = par->screen.sm_addr;
+		} else
+			end = inf->fbmem_len;
+
+		if ((ptr + size) > end)
+			return -ENOMEM;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	mem->size    = size;
+	mem->sm_addr = ptr;
+	mem->k_addr  = inf->fbmem + ptr;
+
+	dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n",
+		__func__, mem->sm_addr, mem->k_addr, why, size);
+
+	return 0;
+}
+
+/* sm501fb_ps_to_hz
+ *
+ * Converts a period in picoseconds to Hz.
+ *
+ * Note, we try to keep this in Hz to minimise rounding with
+ * the limited PLL settings on the SM501.
+*/
+
+static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
+{
+	unsigned long long numerator=1000000000000ULL;
+
+	/* 10^12 / picosecond period gives frequency in Hz */
+	do_div(numerator, psvalue);
+	return (unsigned long)numerator;
+}
+
+/* sm501fb_hz_to_ps is identical to the opposite transform */
+
+#define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
+
+/* sm501fb_setup_gamma
+ *
+ * Programs a linear 1.0 gamma ramp in case the gamma
+ * correction is enabled without programming anything else.
+*/
+
+static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
+				unsigned long palette)
+{
+	unsigned long value = 0;
+	int offset;
+
+	/* set gamma values */
+	for (offset = 0; offset < 256 * 4; offset += 4) {
+		smc501_writel(value, fbi->regs + palette + offset);
+		value += 0x010101; 	/* Advance RGB by 1,1,1.*/
+	}
+}
+
+/* sm501fb_check_var
+ *
+ * check common variables for both panel and crt
+*/
+
+static int sm501fb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *sm  = par->info;
+	unsigned long tmp;
+
+	/* check we can fit these values into the registers */
+
+	if (var->hsync_len > 255 || var->vsync_len > 63)
+		return -EINVAL;
+
+	/* hdisplay end and hsync start */
+	if ((var->xres + var->right_margin) > 4096)
+		return -EINVAL;
+
+	/* vdisplay end and vsync start */
+	if ((var->yres + var->lower_margin) > 2048)
+		return -EINVAL;
+
+	/* hard limits of device */
+
+	if (h_total(var) > 4096 || v_total(var) > 2048)
+		return -EINVAL;
+
+	/* check our line length is going to be 128 bit aligned */
+
+	tmp = (var->xres * var->bits_per_pixel) / 8;
+	if ((tmp & 15) != 0)
+		return -EINVAL;
+
+	/* check the virtual size */
+
+	if (var->xres_virtual > 4096 || var->yres_virtual > 2048)
+		return -EINVAL;
+
+	/* can cope with 8,16 or 32bpp */
+
+	if (var->bits_per_pixel <= 8)
+		var->bits_per_pixel = 8;
+	else if (var->bits_per_pixel <= 16)
+		var->bits_per_pixel = 16;
+	else if (var->bits_per_pixel == 24)
+		var->bits_per_pixel = 32;
+
+	/* set r/g/b positions and validate bpp */
+	switch(var->bits_per_pixel) {
+	case 8:
+		var->red.length		= var->bits_per_pixel;
+		var->red.offset		= 0;
+		var->green.length	= var->bits_per_pixel;
+		var->green.offset	= 0;
+		var->blue.length	= var->bits_per_pixel;
+		var->blue.offset	= 0;
+		var->transp.length	= 0;
+		var->transp.offset	= 0;
+
+		break;
+
+	case 16:
+		if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
+			var->blue.offset	= 11;
+			var->green.offset	= 5;
+			var->red.offset		= 0;
+		} else {
+			var->red.offset		= 11;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+		}
+		var->transp.offset	= 0;
+
+		var->red.length		= 5;
+		var->green.length	= 6;
+		var->blue.length	= 5;
+		var->transp.length	= 0;
+		break;
+
+	case 32:
+		if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
+			var->transp.offset	= 0;
+			var->red.offset		= 8;
+			var->green.offset	= 16;
+			var->blue.offset	= 24;
+		} else {
+			var->transp.offset	= 24;
+			var->red.offset		= 16;
+			var->green.offset	= 8;
+			var->blue.offset	= 0;
+		}
+
+		var->red.length		= 8;
+		var->green.length	= 8;
+		var->blue.length	= 8;
+		var->transp.length	= 0;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * sm501fb_check_var_crt():
+ *
+ * check the parameters for the CRT head, and either bring them
+ * back into range, or return -EINVAL.
+*/
+
+static int sm501fb_check_var_crt(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	return sm501fb_check_var(var, info);
+}
+
+/* sm501fb_check_var_pnl():
+ *
+ * check the parameters for the CRT head, and either bring them
+ * back into range, or return -EINVAL.
+*/
+
+static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	return sm501fb_check_var(var, info);
+}
+
+/* sm501fb_set_par_common
+ *
+ * set common registers for framebuffers
+*/
+
+static int sm501fb_set_par_common(struct fb_info *info,
+				  struct fb_var_screeninfo *var)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	unsigned long pixclock;      /* pixelclock in Hz */
+	unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */
+	unsigned int mem_type;
+	unsigned int clock_type;
+	unsigned int head_addr;
+	unsigned int smem_len;
+
+	dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
+		__func__, var->xres, var->yres, var->bits_per_pixel,
+		var->xres_virtual, var->yres_virtual);
+
+	switch (par->head) {
+	case HEAD_CRT:
+		mem_type = SM501_MEMF_CRT;
+		clock_type = SM501_CLOCK_V2XCLK;
+		head_addr = SM501_DC_CRT_FB_ADDR;
+		break;
+
+	case HEAD_PANEL:
+		mem_type = SM501_MEMF_PANEL;
+		clock_type = SM501_CLOCK_P2XCLK;
+		head_addr = SM501_DC_PANEL_FB_ADDR;
+		break;
+
+	default:
+		mem_type = 0;		/* stop compiler warnings */
+		head_addr = 0;
+		clock_type = 0;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 8:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+
+	case 16:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+
+	case 32:
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		break;
+	}
+
+	/* allocate fb memory within 501 */
+	info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
+	smem_len = info->fix.line_length * var->yres_virtual;
+
+	dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
+		info->fix.line_length);
+
+	if (sm501_alloc_mem(fbi, &par->screen, mem_type, smem_len, smem_len)) {
+		dev_err(fbi->dev, "no memory available\n");
+		return -ENOMEM;
+	}
+
+	mutex_lock(&info->mm_lock);
+	info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
+	info->fix.smem_len   = smem_len;
+	mutex_unlock(&info->mm_lock);
+
+	info->screen_base = fbi->fbmem + par->screen.sm_addr;
+	info->screen_size = info->fix.smem_len;
+
+	/* set start of framebuffer to the screen */
+
+	smc501_writel(par->screen.sm_addr | SM501_ADDR_FLIP,
+			fbi->regs + head_addr);
+
+	/* program CRT clock  */
+
+	pixclock = sm501fb_ps_to_hz(var->pixclock);
+
+	sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type,
+					pixclock);
+
+	/* update fb layer with actual clock used */
+	var->pixclock = sm501fb_hz_to_ps(sm501pixclock);
+
+	dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz)  = %lu, "
+	       "sm501pixclock = %lu,  error = %ld%%\n",
+	       __func__, var->pixclock, pixclock, sm501pixclock,
+	       ((pixclock - sm501pixclock)*100)/pixclock);
+
+	return 0;
+}
+
+/* sm501fb_set_par_geometry
+ *
+ * set the geometry registers for specified framebuffer.
+*/
+
+static void sm501fb_set_par_geometry(struct fb_info *info,
+				     struct fb_var_screeninfo *var)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	void __iomem *base = fbi->regs;
+	unsigned long reg;
+
+	if (par->head == HEAD_CRT)
+		base += SM501_DC_CRT_H_TOT;
+	else
+		base += SM501_DC_PANEL_H_TOT;
+
+	/* set framebuffer width and display width */
+
+	reg = info->fix.line_length;
+	reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
+
+	smc501_writel(reg, fbi->regs + (par->head == HEAD_CRT ?
+		    SM501_DC_CRT_FB_OFFSET :  SM501_DC_PANEL_FB_OFFSET));
+
+	/* program horizontal total */
+
+	reg  = (h_total(var) - 1) << 16;
+	reg |= (var->xres - 1);
+
+	smc501_writel(reg, base + SM501_OFF_DC_H_TOT);
+
+	/* program horizontal sync */
+
+	reg  = var->hsync_len << 16;
+	reg |= var->xres + var->right_margin - 1;
+
+	smc501_writel(reg, base + SM501_OFF_DC_H_SYNC);
+
+	/* program vertical total */
+
+	reg  = (v_total(var) - 1) << 16;
+	reg |= (var->yres - 1);
+
+	smc501_writel(reg, base + SM501_OFF_DC_V_TOT);
+
+	/* program vertical sync */
+	reg  = var->vsync_len << 16;
+	reg |= var->yres + var->lower_margin - 1;
+
+	smc501_writel(reg, base + SM501_OFF_DC_V_SYNC);
+}
+
+/* sm501fb_pan_crt
+ *
+ * pan the CRT display output within an virtual framebuffer
+*/
+
+static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
+			   struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	unsigned int bytes_pixel = info->var.bits_per_pixel / 8;
+	unsigned long reg;
+	unsigned long xoffs;
+
+	xoffs = var->xoffset * bytes_pixel;
+
+	reg = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
+
+	reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
+	reg |= ((xoffs & 15) / bytes_pixel) << 4;
+	smc501_writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
+
+	reg = (par->screen.sm_addr + xoffs +
+	       var->yoffset * info->fix.line_length);
+	smc501_writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
+
+	sm501fb_sync_regs(fbi);
+	return 0;
+}
+
+/* sm501fb_pan_pnl
+ *
+ * pan the panel display output within an virtual framebuffer
+*/
+
+static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
+			   struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	unsigned long reg;
+
+	reg = var->xoffset | (info->var.xres_virtual << 16);
+	smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
+
+	reg = var->yoffset | (info->var.yres_virtual << 16);
+	smc501_writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
+
+	sm501fb_sync_regs(fbi);
+	return 0;
+}
+
+/* sm501fb_set_par_crt
+ *
+ * Set the CRT video mode from the fb_info structure
+*/
+
+static int sm501fb_set_par_crt(struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	struct fb_var_screeninfo *var = &info->var;
+	unsigned long control;       /* control register */
+	int ret;
+
+	/* activate new configuration */
+
+	dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
+
+	/* enable CRT DAC - note 0 is on!*/
+	sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
+
+	control = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
+
+	control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
+		    SM501_DC_CRT_CONTROL_GAMMA |
+		    SM501_DC_CRT_CONTROL_BLANK |
+		    SM501_DC_CRT_CONTROL_SEL |
+		    SM501_DC_CRT_CONTROL_CP |
+		    SM501_DC_CRT_CONTROL_TVP);
+
+	/* set the sync polarities before we check data source  */
+
+	if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
+		control |= SM501_DC_CRT_CONTROL_HSP;
+
+	if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
+		control |= SM501_DC_CRT_CONTROL_VSP;
+
+	if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
+		/* the head is displaying panel data... */
+
+		sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0,
+				info->fix.smem_len);
+		goto out_update;
+	}
+
+	ret = sm501fb_set_par_common(info, var);
+	if (ret) {
+		dev_err(fbi->dev, "failed to set common parameters\n");
+		return ret;
+	}
+
+	sm501fb_pan_crt(var, info);
+	sm501fb_set_par_geometry(info, var);
+
+	control |= SM501_FIFO_3;	/* fill if >3 free slots */
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		control |= SM501_DC_CRT_CONTROL_8BPP;
+		break;
+
+	case 16:
+		control |= SM501_DC_CRT_CONTROL_16BPP;
+		sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
+		break;
+
+	case 32:
+		control |= SM501_DC_CRT_CONTROL_32BPP;
+		sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
+		break;
+
+	default:
+		BUG();
+	}
+
+	control |= SM501_DC_CRT_CONTROL_SEL;	/* CRT displays CRT data */
+	control |= SM501_DC_CRT_CONTROL_TE;	/* enable CRT timing */
+	control |= SM501_DC_CRT_CONTROL_ENABLE;	/* enable CRT plane */
+
+ out_update:
+	dev_dbg(fbi->dev, "new control is %08lx\n", control);
+
+	smc501_writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
+	sm501fb_sync_regs(fbi);
+
+	return 0;
+}
+
+static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
+{
+	unsigned long control;
+	void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
+	struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
+
+	control = smc501_readl(ctrl_reg);
+
+	if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
+		/* enable panel power */
+
+		control |= SM501_DC_PANEL_CONTROL_VDD;	/* FPVDDEN */
+		smc501_writel(control, ctrl_reg);
+		sm501fb_sync_regs(fbi);
+		mdelay(10);
+
+		control |= SM501_DC_PANEL_CONTROL_DATA;	/* DATA */
+		smc501_writel(control, ctrl_reg);
+		sm501fb_sync_regs(fbi);
+		mdelay(10);
+
+		/* VBIASEN */
+
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
+				control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+			else
+				control |= SM501_DC_PANEL_CONTROL_BIAS;
+
+			smc501_writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
+
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
+				control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+			else
+				control |= SM501_DC_PANEL_CONTROL_FPEN;
+
+			smc501_writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
+	} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
+		/* disable panel power */
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
+				control |= SM501_DC_PANEL_CONTROL_FPEN;
+			else
+				control &= ~SM501_DC_PANEL_CONTROL_FPEN;
+
+			smc501_writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
+
+		if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
+			if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
+				control |= SM501_DC_PANEL_CONTROL_BIAS;
+			else
+				control &= ~SM501_DC_PANEL_CONTROL_BIAS;
+
+			smc501_writel(control, ctrl_reg);
+			sm501fb_sync_regs(fbi);
+			mdelay(10);
+		}
+
+		control &= ~SM501_DC_PANEL_CONTROL_DATA;
+		smc501_writel(control, ctrl_reg);
+		sm501fb_sync_regs(fbi);
+		mdelay(10);
+
+		control &= ~SM501_DC_PANEL_CONTROL_VDD;
+		smc501_writel(control, ctrl_reg);
+		sm501fb_sync_regs(fbi);
+		mdelay(10);
+	}
+
+	sm501fb_sync_regs(fbi);
+}
+
+/* sm501fb_set_par_pnl
+ *
+ * Set the panel video mode from the fb_info structure
+*/
+
+static int sm501fb_set_par_pnl(struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	struct fb_var_screeninfo *var = &info->var;
+	unsigned long control;
+	unsigned long reg;
+	int ret;
+
+	dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
+
+	/* activate this new configuration */
+
+	ret = sm501fb_set_par_common(info, var);
+	if (ret)
+		return ret;
+
+	sm501fb_pan_pnl(var, info);
+	sm501fb_set_par_geometry(info, var);
+
+	/* update control register */
+
+	control = smc501_readl(fbi->regs + SM501_DC_PANEL_CONTROL);
+	control &= (SM501_DC_PANEL_CONTROL_GAMMA |
+		    SM501_DC_PANEL_CONTROL_VDD  |
+		    SM501_DC_PANEL_CONTROL_DATA |
+		    SM501_DC_PANEL_CONTROL_BIAS |
+		    SM501_DC_PANEL_CONTROL_FPEN |
+		    SM501_DC_PANEL_CONTROL_CP |
+		    SM501_DC_PANEL_CONTROL_CK |
+		    SM501_DC_PANEL_CONTROL_HP |
+		    SM501_DC_PANEL_CONTROL_VP |
+		    SM501_DC_PANEL_CONTROL_HPD |
+		    SM501_DC_PANEL_CONTROL_VPD);
+
+	control |= SM501_FIFO_3;	/* fill if >3 free slots */
+
+	switch(var->bits_per_pixel) {
+	case 8:
+		control |= SM501_DC_PANEL_CONTROL_8BPP;
+		break;
+
+	case 16:
+		control |= SM501_DC_PANEL_CONTROL_16BPP;
+		sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
+		break;
+
+	case 32:
+		control |= SM501_DC_PANEL_CONTROL_32BPP;
+		sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
+		break;
+
+	default:
+		BUG();
+	}
+
+	smc501_writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
+
+	/* panel plane top left and bottom right location */
+
+	smc501_writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
+
+	reg  = var->xres - 1;
+	reg |= (var->yres - 1) << 16;
+
+	smc501_writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
+
+	/* program panel control register */
+
+	control |= SM501_DC_PANEL_CONTROL_TE;	/* enable PANEL timing */
+	control |= SM501_DC_PANEL_CONTROL_EN;	/* enable PANEL gfx plane */
+
+	if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
+		control |= SM501_DC_PANEL_CONTROL_HSP;
+
+	if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
+		control |= SM501_DC_PANEL_CONTROL_VSP;
+
+	smc501_writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
+	sm501fb_sync_regs(fbi);
+
+	/* ensure the panel interface is not tristated at this point */
+
+	sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL,
+			 0, SM501_SYSCTRL_PANEL_TRISTATE);
+
+	/* power the panel up */
+	sm501fb_panel_power(fbi, 1);
+	return 0;
+}
+
+
+/* chan_to_field
+ *
+ * convert a colour value into a field position
+ *
+ * from pxafb.c
+*/
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/* sm501fb_setcolreg
+ *
+ * set the colour mapping for modes that support palettised data
+*/
+
+static int sm501fb_setcolreg(unsigned regno,
+			     unsigned red, unsigned green, unsigned blue,
+			     unsigned transp, struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	void __iomem *base = fbi->regs;
+	unsigned int val;
+
+	if (par->head == HEAD_CRT)
+		base += SM501_DC_CRT_PALETTE;
+	else
+		base += SM501_DC_PANEL_PALETTE;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/* true-colour, use pseuo-palette */
+
+		if (regno < 16) {
+			u32 *pal = par->pseudo_palette;
+
+			val  = chan_to_field(red,   &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue,  &info->var.blue);
+
+			pal[regno] = val;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < 256) {
+			val = (red >> 8) << 16;
+			val |= (green >> 8) << 8;
+			val |= blue >> 8;
+
+			smc501_writel(val, base + (regno * 4));
+		}
+
+		break;
+
+	default:
+		return 1;   /* unknown type */
+	}
+
+	return 0;
+}
+
+/* sm501fb_blank_pnl
+ *
+ * Blank or un-blank the panel interface
+*/
+
+static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+
+	dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
+
+	switch (blank_mode) {
+	case FB_BLANK_POWERDOWN:
+		sm501fb_panel_power(fbi, 0);
+		break;
+
+	case FB_BLANK_UNBLANK:
+		sm501fb_panel_power(fbi, 1);
+		break;
+
+	case FB_BLANK_NORMAL:
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+/* sm501fb_blank_crt
+ *
+ * Blank or un-blank the crt interface
+*/
+
+static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	unsigned long ctrl;
+
+	dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
+
+	ctrl = smc501_readl(fbi->regs + SM501_DC_CRT_CONTROL);
+
+	switch (blank_mode) {
+	case FB_BLANK_POWERDOWN:
+		ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
+		sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0);
+
+	case FB_BLANK_NORMAL:
+		ctrl |= SM501_DC_CRT_CONTROL_BLANK;
+		break;
+
+	case FB_BLANK_UNBLANK:
+		ctrl &= ~SM501_DC_CRT_CONTROL_BLANK;
+		ctrl |=  SM501_DC_CRT_CONTROL_ENABLE;
+		sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
+		break;
+
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+	default:
+		return 1;
+
+	}
+
+	smc501_writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
+	sm501fb_sync_regs(fbi);
+
+	return 0;
+}
+
+/* sm501fb_cursor
+ *
+ * set or change the hardware cursor parameters
+*/
+
+static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	void __iomem *base = fbi->regs;
+	unsigned long hwc_addr;
+	unsigned long fg, bg;
+
+	dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor);
+
+	if (par->head == HEAD_CRT)
+		base += SM501_DC_CRT_HWC_BASE;
+	else
+		base += SM501_DC_PANEL_HWC_BASE;
+
+	/* check not being asked to exceed capabilities */
+
+	if (cursor->image.width > 64)
+		return -EINVAL;
+
+	if (cursor->image.height > 64)
+		return -EINVAL;
+
+	if (cursor->image.depth > 1)
+		return -EINVAL;
+
+	hwc_addr = smc501_readl(base + SM501_OFF_HWC_ADDR);
+
+	if (cursor->enable)
+		smc501_writel(hwc_addr | SM501_HWC_EN,
+				base + SM501_OFF_HWC_ADDR);
+	else
+		smc501_writel(hwc_addr & ~SM501_HWC_EN,
+				base + SM501_OFF_HWC_ADDR);
+
+	/* set data */
+	if (cursor->set & FB_CUR_SETPOS) {
+		unsigned int x = cursor->image.dx;
+		unsigned int y = cursor->image.dy;
+
+		if (x >= 2048 || y >= 2048 )
+			return -EINVAL;
+
+		dev_dbg(fbi->dev, "set position %d,%d\n", x, y);
+
+		//y += cursor->image.height;
+
+		smc501_writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
+	}
+
+	if (cursor->set & FB_CUR_SETCMAP) {
+		unsigned int bg_col = cursor->image.bg_color;
+		unsigned int fg_col = cursor->image.fg_color;
+
+		dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n",
+			__func__, bg_col, fg_col);
+
+		bg = ((info->cmap.red[bg_col] & 0xF8) << 8) |
+			((info->cmap.green[bg_col] & 0xFC) << 3) |
+			((info->cmap.blue[bg_col] & 0xF8) >> 3);
+
+		fg = ((info->cmap.red[fg_col] & 0xF8) << 8) |
+			((info->cmap.green[fg_col] & 0xFC) << 3) |
+			((info->cmap.blue[fg_col] & 0xF8) >> 3);
+
+		dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
+
+		smc501_writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
+		smc501_writel(fg, base + SM501_OFF_HWC_COLOR_3);
+	}
+
+	if (cursor->set & FB_CUR_SETSIZE ||
+	    cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
+		/* SM501 cursor is a two bpp 64x64 bitmap this routine
+		 * clears it to transparent then combines the cursor
+		 * shape plane with the colour plane to set the
+		 * cursor */
+		int x, y;
+		const unsigned char *pcol = cursor->image.data;
+		const unsigned char *pmsk = cursor->mask;
+		void __iomem   *dst = par->cursor.k_addr;
+		unsigned char  dcol = 0;
+		unsigned char  dmsk = 0;
+		unsigned int   op;
+
+		dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n",
+			__func__, cursor->image.width, cursor->image.height);
+
+		for (op = 0; op < (64*64*2)/8; op+=4)
+			smc501_writel(0x0, dst + op);
+
+		for (y = 0; y < cursor->image.height; y++) {
+			for (x = 0; x < cursor->image.width; x++) {
+				if ((x % 8) == 0) {
+					dcol = *pcol++;
+					dmsk = *pmsk++;
+				} else {
+					dcol >>= 1;
+					dmsk >>= 1;
+				}
+
+				if (dmsk & 1) {
+					op = (dcol & 1) ? 1 : 3;
+					op <<= ((x % 4) * 2);
+
+					op |= readb(dst + (x / 4));
+					writeb(op, dst + (x / 4));
+				}
+			}
+			dst += (64*2)/8;
+		}
+	}
+
+	sm501fb_sync_regs(fbi);	/* ensure cursor data flushed */
+	return 0;
+}
+
+/* sm501fb_crtsrc_show
+ *
+ * device attribute code to show where the crt output is sourced from
+*/
+
+static ssize_t sm501fb_crtsrc_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct sm501fb_info *info = dev_get_drvdata(dev);
+	unsigned long ctrl;
+
+	ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
+	ctrl &= SM501_DC_CRT_CONTROL_SEL;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
+}
+
+/* sm501fb_crtsrc_show
+ *
+ * device attribute code to set where the crt output is sourced from
+*/
+
+static ssize_t sm501fb_crtsrc_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct sm501fb_info *info = dev_get_drvdata(dev);
+	enum sm501_controller head;
+	unsigned long ctrl;
+
+	if (len < 1)
+		return -EINVAL;
+
+	if (strncasecmp(buf, "crt", 3) == 0)
+		head = HEAD_CRT;
+	else if (strncasecmp(buf, "panel", 5) == 0)
+		head = HEAD_PANEL;
+	else
+		return -EINVAL;
+
+	dev_info(dev, "setting crt source to head %d\n", head);
+
+	ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
+
+	if (head == HEAD_CRT) {
+		ctrl |= SM501_DC_CRT_CONTROL_SEL;
+		ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
+		ctrl |= SM501_DC_CRT_CONTROL_TE;
+	} else {
+		ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
+		ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
+		ctrl &= ~SM501_DC_CRT_CONTROL_TE;
+	}
+
+	smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
+	sm501fb_sync_regs(info);
+
+	return len;
+}
+
+/* Prepare the device_attr for registration with sysfs later */
+static DEVICE_ATTR(crt_src, 0664, sm501fb_crtsrc_show, sm501fb_crtsrc_store);
+
+/* sm501fb_show_regs
+ *
+ * show the primary sm501 registers
+*/
+static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
+			     unsigned int start, unsigned int len)
+{
+	void __iomem *mem = info->regs;
+	char *buf = ptr;
+	unsigned int reg;
+
+	for (reg = start; reg < (len + start); reg += 4)
+		ptr += sprintf(ptr, "%08x = %08x\n", reg,
+				smc501_readl(mem + reg));
+
+	return ptr - buf;
+}
+
+/* sm501fb_debug_show_crt
+ *
+ * show the crt control and cursor registers
+*/
+
+static ssize_t sm501fb_debug_show_crt(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct sm501fb_info *info = dev_get_drvdata(dev);
+	char *ptr = buf;
+
+	ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40);
+	ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10);
+
+	return ptr - buf;
+}
+
+static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL);
+
+/* sm501fb_debug_show_pnl
+ *
+ * show the panel control and cursor registers
+*/
+
+static ssize_t sm501fb_debug_show_pnl(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct sm501fb_info *info = dev_get_drvdata(dev);
+	char *ptr = buf;
+
+	ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40);
+	ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10);
+
+	return ptr - buf;
+}
+
+static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL);
+
+/* acceleration operations */
+static int sm501fb_sync(struct fb_info *info)
+{
+	int count = 1000000;
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+
+	/* wait for the 2d engine to be ready */
+	while ((count > 0) &&
+	       (smc501_readl(fbi->regs + SM501_SYSTEM_CONTROL) &
+		SM501_SYSCTRL_2D_ENGINE_STATUS) != 0)
+		count--;
+
+	if (count <= 0) {
+		dev_err(info->dev, "Timeout waiting for 2d engine sync\n");
+		return 1;
+	}
+	return 0;
+}
+
+static void sm501fb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	int width = area->width;
+	int height = area->height;
+	int sx = area->sx;
+	int sy = area->sy;
+	int dx = area->dx;
+	int dy = area->dy;
+	unsigned long rtl = 0;
+
+	/* source clip */
+	if ((sx >= info->var.xres_virtual) ||
+	    (sy >= info->var.yres_virtual))
+		/* source Area not within virtual screen, skipping */
+		return;
+	if ((sx + width) >= info->var.xres_virtual)
+		width = info->var.xres_virtual - sx - 1;
+	if ((sy + height) >= info->var.yres_virtual)
+		height = info->var.yres_virtual - sy - 1;
+
+	/* dest clip */
+	if ((dx >= info->var.xres_virtual) ||
+	    (dy >= info->var.yres_virtual))
+		/* Destination Area not within virtual screen, skipping */
+		return;
+	if ((dx + width) >= info->var.xres_virtual)
+		width = info->var.xres_virtual - dx - 1;
+	if ((dy + height) >= info->var.yres_virtual)
+		height = info->var.yres_virtual - dy - 1;
+
+	if ((sx < dx) || (sy < dy)) {
+		rtl = 1 << 27;
+		sx += width - 1;
+		dx += width - 1;
+		sy += height - 1;
+		dy += height - 1;
+	}
+
+	if (sm501fb_sync(info))
+		return;
+
+	/* set the base addresses */
+	smc501_writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
+	smc501_writel(par->screen.sm_addr,
+			fbi->regs2d + SM501_2D_DESTINATION_BASE);
+
+	/* set the window width */
+	smc501_writel((info->var.xres << 16) | info->var.xres,
+	       fbi->regs2d + SM501_2D_WINDOW_WIDTH);
+
+	/* set window stride */
+	smc501_writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
+	       fbi->regs2d + SM501_2D_PITCH);
+
+	/* set data format */
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		smc501_writel(0, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	case 16:
+		smc501_writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	case 32:
+		smc501_writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	}
+
+	/* 2d compare mask */
+	smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
+
+	/* 2d mask */
+	smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
+
+	/* source and destination x y */
+	smc501_writel((sx << 16) | sy, fbi->regs2d + SM501_2D_SOURCE);
+	smc501_writel((dx << 16) | dy, fbi->regs2d + SM501_2D_DESTINATION);
+
+	/* w/h */
+	smc501_writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
+
+	/* do area move */
+	smc501_writel(0x800000cc | rtl, fbi->regs2d + SM501_2D_CONTROL);
+}
+
+static void sm501fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct sm501fb_par  *par = info->par;
+	struct sm501fb_info *fbi = par->info;
+	int width = rect->width, height = rect->height;
+
+	if ((rect->dx >= info->var.xres_virtual) ||
+	    (rect->dy >= info->var.yres_virtual))
+		/* Rectangle not within virtual screen, skipping */
+		return;
+	if ((rect->dx + width) >= info->var.xres_virtual)
+		width = info->var.xres_virtual - rect->dx - 1;
+	if ((rect->dy + height) >= info->var.yres_virtual)
+		height = info->var.yres_virtual - rect->dy - 1;
+
+	if (sm501fb_sync(info))
+		return;
+
+	/* set the base addresses */
+	smc501_writel(par->screen.sm_addr, fbi->regs2d + SM501_2D_SOURCE_BASE);
+	smc501_writel(par->screen.sm_addr,
+			fbi->regs2d + SM501_2D_DESTINATION_BASE);
+
+	/* set the window width */
+	smc501_writel((info->var.xres << 16) | info->var.xres,
+	       fbi->regs2d + SM501_2D_WINDOW_WIDTH);
+
+	/* set window stride */
+	smc501_writel((info->var.xres_virtual << 16) | info->var.xres_virtual,
+	       fbi->regs2d + SM501_2D_PITCH);
+
+	/* set data format */
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		smc501_writel(0, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	case 16:
+		smc501_writel(0x00100000, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	case 32:
+		smc501_writel(0x00200000, fbi->regs2d + SM501_2D_STRETCH);
+		break;
+	}
+
+	/* 2d compare mask */
+	smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_COLOR_COMPARE_MASK);
+
+	/* 2d mask */
+	smc501_writel(0xffffffff, fbi->regs2d + SM501_2D_MASK);
+
+	/* colour */
+	smc501_writel(rect->color, fbi->regs2d + SM501_2D_FOREGROUND);
+
+	/* x y */
+	smc501_writel((rect->dx << 16) | rect->dy,
+			fbi->regs2d + SM501_2D_DESTINATION);
+
+	/* w/h */
+	smc501_writel((width << 16) | height, fbi->regs2d + SM501_2D_DIMENSION);
+
+	/* do rectangle fill */
+	smc501_writel(0x800100cc, fbi->regs2d + SM501_2D_CONTROL);
+}
+
+
+static struct fb_ops sm501fb_ops_crt = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= sm501fb_check_var_crt,
+	.fb_set_par	= sm501fb_set_par_crt,
+	.fb_blank	= sm501fb_blank_crt,
+	.fb_setcolreg	= sm501fb_setcolreg,
+	.fb_pan_display	= sm501fb_pan_crt,
+	.fb_cursor	= sm501fb_cursor,
+	.fb_fillrect	= sm501fb_fillrect,
+	.fb_copyarea	= sm501fb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_sync	= sm501fb_sync,
+};
+
+static struct fb_ops sm501fb_ops_pnl = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= sm501fb_check_var_pnl,
+	.fb_set_par	= sm501fb_set_par_pnl,
+	.fb_pan_display	= sm501fb_pan_pnl,
+	.fb_blank	= sm501fb_blank_pnl,
+	.fb_setcolreg	= sm501fb_setcolreg,
+	.fb_cursor	= sm501fb_cursor,
+	.fb_fillrect	= sm501fb_fillrect,
+	.fb_copyarea	= sm501fb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_sync	= sm501fb_sync,
+};
+
+/* sm501_init_cursor
+ *
+ * initialise hw cursor parameters
+*/
+
+static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
+{
+	struct sm501fb_par *par;
+	struct sm501fb_info *info;
+	int ret;
+
+	if (fbi == NULL)
+		return 0;
+
+	par = fbi->par;
+	info = par->info;
+
+	par->cursor_regs = info->regs + reg_base;
+
+	ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024,
+			      fbi->fix.smem_len);
+	if (ret < 0)
+		return ret;
+
+	/* initialise the colour registers */
+
+	smc501_writel(par->cursor.sm_addr,
+			par->cursor_regs + SM501_OFF_HWC_ADDR);
+
+	smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
+	smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
+	smc501_writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
+	sm501fb_sync_regs(info);
+
+	return 0;
+}
+
+/* sm501fb_info_start
+ *
+ * fills the par structure claiming resources and remapping etc.
+*/
+
+static int sm501fb_start(struct sm501fb_info *info,
+			 struct platform_device *pdev)
+{
+	struct resource	*res;
+	struct device *dev = &pdev->dev;
+	int k;
+	int ret;
+
+	info->irq = ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		/* we currently do not use the IRQ */
+		dev_warn(dev, "no irq for device\n");
+	}
+
+	/* allocate, reserve and remap resources for display
+	 * controller registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no resource definition for registers\n");
+		ret = -ENOENT;
+		goto err_release;
+	}
+
+	info->regs_res = request_mem_region(res->start,
+					    resource_size(res),
+					    pdev->name);
+
+	if (info->regs_res == NULL) {
+		dev_err(dev, "cannot claim registers\n");
+		ret = -ENXIO;
+		goto err_release;
+	}
+
+	info->regs = ioremap(res->start, resource_size(res));
+	if (info->regs == NULL) {
+		dev_err(dev, "cannot remap registers\n");
+		ret = -ENXIO;
+		goto err_regs_res;
+	}
+
+	/* allocate, reserve and remap resources for 2d
+	 * controller registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res == NULL) {
+		dev_err(dev, "no resource definition for 2d registers\n");
+		ret = -ENOENT;
+		goto err_regs_map;
+	}
+
+	info->regs2d_res = request_mem_region(res->start,
+					      resource_size(res),
+					      pdev->name);
+
+	if (info->regs2d_res == NULL) {
+		dev_err(dev, "cannot claim registers\n");
+		ret = -ENXIO;
+		goto err_regs_map;
+	}
+
+	info->regs2d = ioremap(res->start, resource_size(res));
+	if (info->regs2d == NULL) {
+		dev_err(dev, "cannot remap registers\n");
+		ret = -ENXIO;
+		goto err_regs2d_res;
+	}
+
+	/* allocate, reserve resources for framebuffer */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (res == NULL) {
+		dev_err(dev, "no memory resource defined\n");
+		ret = -ENXIO;
+		goto err_regs2d_map;
+	}
+
+	info->fbmem_res = request_mem_region(res->start,
+					     resource_size(res),
+					     pdev->name);
+	if (info->fbmem_res == NULL) {
+		dev_err(dev, "cannot claim framebuffer\n");
+		ret = -ENXIO;
+		goto err_regs2d_map;
+	}
+
+	info->fbmem = ioremap(res->start, resource_size(res));
+	if (info->fbmem == NULL) {
+		dev_err(dev, "cannot remap framebuffer\n");
+		goto err_mem_res;
+	}
+
+	info->fbmem_len = resource_size(res);
+
+	/* clear framebuffer memory - avoids garbage data on unused fb */
+	memset_io(info->fbmem, 0, info->fbmem_len);
+
+	/* clear palette ram - undefined at power on */
+	for (k = 0; k < (256 * 3); k++)
+		smc501_writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
+
+	/* enable display controller */
+	sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
+
+	/* enable 2d controller */
+	sm501_unit_power(dev->parent, SM501_GATE_2D_ENGINE, 1);
+
+	/* setup cursors */
+	sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR);
+	sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR);
+
+	return 0; /* everything is setup */
+
+ err_mem_res:
+	release_mem_region(info->fbmem_res->start,
+			   resource_size(info->fbmem_res));
+
+ err_regs2d_map:
+	iounmap(info->regs2d);
+
+ err_regs2d_res:
+	release_mem_region(info->regs2d_res->start,
+			   resource_size(info->regs2d_res));
+
+ err_regs_map:
+	iounmap(info->regs);
+
+ err_regs_res:
+	release_mem_region(info->regs_res->start,
+			   resource_size(info->regs_res));
+
+ err_release:
+	return ret;
+}
+
+static void sm501fb_stop(struct sm501fb_info *info)
+{
+	/* disable display controller */
+	sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
+
+	iounmap(info->fbmem);
+	release_mem_region(info->fbmem_res->start,
+			   resource_size(info->fbmem_res));
+
+	iounmap(info->regs2d);
+	release_mem_region(info->regs2d_res->start,
+			   resource_size(info->regs2d_res));
+
+	iounmap(info->regs);
+	release_mem_region(info->regs_res->start,
+			   resource_size(info->regs_res));
+}
+
+static int sm501fb_init_fb(struct fb_info *fb, enum sm501_controller head,
+			   const char *fbname)
+{
+	struct sm501_platdata_fbsub *pd;
+	struct sm501fb_par *par = fb->par;
+	struct sm501fb_info *info = par->info;
+	unsigned long ctrl;
+	unsigned int enable;
+	int ret;
+
+	switch (head) {
+	case HEAD_CRT:
+		pd = info->pdata->fb_crt;
+		ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
+		enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
+
+		/* ensure we set the correct source register */
+		if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
+			ctrl |= SM501_DC_CRT_CONTROL_SEL;
+			smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
+		}
+
+		break;
+
+	case HEAD_PANEL:
+		pd = info->pdata->fb_pnl;
+		ctrl = smc501_readl(info->regs + SM501_DC_PANEL_CONTROL);
+		enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
+		break;
+
+	default:
+		pd = NULL;		/* stop compiler warnings */
+		ctrl = 0;
+		enable = 0;
+		BUG();
+	}
+
+	dev_info(info->dev, "fb %s %sabled at start\n",
+		 fbname, enable ? "en" : "dis");
+
+	/* check to see if our routing allows this */
+
+	if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
+		ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
+		smc501_writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
+		enable = 0;
+	}
+
+	strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id));
+
+	memcpy(&par->ops,
+	       (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
+	       sizeof(struct fb_ops));
+
+	/* update ops dependent on what we've been passed */
+
+	if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
+		par->ops.fb_cursor = NULL;
+
+	fb->fbops = &par->ops;
+	fb->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST |
+		FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
+		FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+
+#if defined(CONFIG_OF)
+#ifdef __BIG_ENDIAN
+	if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
+		fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#else
+	if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
+		fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#endif
+#endif
+	/* fixed data */
+
+	fb->fix.type		= FB_TYPE_PACKED_PIXELS;
+	fb->fix.type_aux	= 0;
+	fb->fix.xpanstep	= 1;
+	fb->fix.ypanstep	= 1;
+	fb->fix.ywrapstep	= 0;
+	fb->fix.accel		= FB_ACCEL_NONE;
+
+	/* screenmode */
+
+	fb->var.nonstd		= 0;
+	fb->var.activate	= FB_ACTIVATE_NOW;
+	fb->var.accel_flags	= 0;
+	fb->var.vmode		= FB_VMODE_NONINTERLACED;
+	fb->var.bits_per_pixel  = 16;
+
+	if (info->edid_data) {
+			/* Now build modedb from EDID */
+			fb_edid_to_monspecs(info->edid_data, &fb->monspecs);
+			fb_videomode_to_modelist(fb->monspecs.modedb,
+						 fb->monspecs.modedb_len,
+						 &fb->modelist);
+	}
+
+	if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
+		/* TODO read the mode from the current display */
+	} else {
+		if (pd->def_mode) {
+			dev_info(info->dev, "using supplied mode\n");
+			fb_videomode_to_var(&fb->var, pd->def_mode);
+
+			fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8;
+			fb->var.xres_virtual = fb->var.xres;
+			fb->var.yres_virtual = fb->var.yres;
+		} else {
+			if (info->edid_data) {
+				ret = fb_find_mode(&fb->var, fb, fb_mode,
+					fb->monspecs.modedb,
+					fb->monspecs.modedb_len,
+					&sm501_default_mode, default_bpp);
+				/* edid_data is no longer needed, free it */
+				kfree(info->edid_data);
+			} else {
+				ret = fb_find_mode(&fb->var, fb,
+					   NULL, NULL, 0, NULL, 8);
+			}
+
+			switch (ret) {
+			case 1:
+				dev_info(info->dev, "using mode specified in "
+						"@mode\n");
+				break;
+			case 2:
+				dev_info(info->dev, "using mode specified in "
+					"@mode with ignored refresh rate\n");
+				break;
+			case 3:
+				dev_info(info->dev, "using mode default "
+					"mode\n");
+				break;
+			case 4:
+				dev_info(info->dev, "using mode from list\n");
+				break;
+			default:
+				dev_info(info->dev, "ret = %d\n", ret);
+				dev_info(info->dev, "failed to find mode\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* initialise and set the palette */
+	if (fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0)) {
+		dev_err(info->dev, "failed to allocate cmap memory\n");
+		return -ENOMEM;
+	}
+	fb_set_cmap(&fb->cmap, fb);
+
+	ret = (fb->fbops->fb_check_var)(&fb->var, fb);
+	if (ret)
+		dev_err(info->dev, "check_var() failed on initial setup?\n");
+
+	return 0;
+}
+
+/* default platform data if none is supplied (ie, PCI device) */
+
+static struct sm501_platdata_fbsub sm501fb_pdata_crt = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+
+};
+
+static struct sm501_platdata_fbsub sm501fb_pdata_pnl = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+};
+
+static struct sm501_platdata_fb sm501fb_def_pdata = {
+	.fb_route		= SM501_FB_OWN,
+	.fb_crt			= &sm501fb_pdata_crt,
+	.fb_pnl			= &sm501fb_pdata_pnl,
+};
+
+static char driver_name_crt[] = "sm501fb-crt";
+static char driver_name_pnl[] = "sm501fb-panel";
+
+static int sm501fb_probe_one(struct sm501fb_info *info,
+			     enum sm501_controller head)
+{
+	unsigned char *name = (head == HEAD_CRT) ? "crt" : "panel";
+	struct sm501_platdata_fbsub *pd;
+	struct sm501fb_par *par;
+	struct fb_info *fbi;
+
+	pd = (head == HEAD_CRT) ? info->pdata->fb_crt : info->pdata->fb_pnl;
+
+	/* Do not initialise if we've not been given any platform data */
+	if (pd == NULL) {
+		dev_info(info->dev, "no data for fb %s (disabled)\n", name);
+		return 0;
+	}
+
+	fbi = framebuffer_alloc(sizeof(struct sm501fb_par), info->dev);
+	if (fbi == NULL) {
+		dev_err(info->dev, "cannot allocate %s framebuffer\n", name);
+		return -ENOMEM;
+	}
+
+	par = fbi->par;
+	par->info = info;
+	par->head = head;
+	fbi->pseudo_palette = &par->pseudo_palette;
+
+	info->fb[head] = fbi;
+
+	return 0;
+}
+
+/* Free up anything allocated by sm501fb_init_fb */
+
+static void sm501_free_init_fb(struct sm501fb_info *info,
+				enum sm501_controller head)
+{
+	struct fb_info *fbi = info->fb[head];
+
+	fb_dealloc_cmap(&fbi->cmap);
+}
+
+static int sm501fb_start_one(struct sm501fb_info *info,
+			     enum sm501_controller head, const char *drvname)
+{
+	struct fb_info *fbi = info->fb[head];
+	int ret;
+
+	if (!fbi)
+		return 0;
+
+	mutex_init(&info->fb[head]->mm_lock);
+
+	ret = sm501fb_init_fb(info->fb[head], head, drvname);
+	if (ret) {
+		dev_err(info->dev, "cannot initialise fb %s\n", drvname);
+		return ret;
+	}
+
+	ret = register_framebuffer(info->fb[head]);
+	if (ret) {
+		dev_err(info->dev, "failed to register fb %s\n", drvname);
+		sm501_free_init_fb(info, head);
+		return ret;
+	}
+
+	dev_info(info->dev, "fb%d: %s frame buffer\n", fbi->node, fbi->fix.id);
+
+	return 0;
+}
+
+static int sm501fb_probe(struct platform_device *pdev)
+{
+	struct sm501fb_info *info;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	/* allocate our framebuffers */
+
+	info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
+	if (!info) {
+		dev_err(dev, "failed to allocate state\n");
+		return -ENOMEM;
+	}
+
+	info->dev = dev = &pdev->dev;
+	platform_set_drvdata(pdev, info);
+
+	if (dev->parent->platform_data) {
+		struct sm501_platdata *pd = dev->parent->platform_data;
+		info->pdata = pd->fb;
+	}
+
+	if (info->pdata == NULL) {
+		int found = 0;
+#if defined(CONFIG_OF)
+		struct device_node *np = pdev->dev.parent->of_node;
+		const u8 *prop;
+		const char *cp;
+		int len;
+
+		info->pdata = &sm501fb_def_pdata;
+		if (np) {
+			/* Get EDID */
+			cp = of_get_property(np, "mode", &len);
+			if (cp)
+				strcpy(fb_mode, cp);
+			prop = of_get_property(np, "edid", &len);
+			if (prop && len == EDID_LENGTH) {
+				info->edid_data = kmemdup(prop, EDID_LENGTH,
+							  GFP_KERNEL);
+				if (info->edid_data)
+					found = 1;
+			}
+		}
+#endif
+		if (!found) {
+			dev_info(dev, "using default configuration data\n");
+			info->pdata = &sm501fb_def_pdata;
+		}
+	}
+
+	/* probe for the presence of each panel */
+
+	ret = sm501fb_probe_one(info, HEAD_CRT);
+	if (ret < 0) {
+		dev_err(dev, "failed to probe CRT\n");
+		goto err_alloc;
+	}
+
+	ret = sm501fb_probe_one(info, HEAD_PANEL);
+	if (ret < 0) {
+		dev_err(dev, "failed to probe PANEL\n");
+		goto err_probed_crt;
+	}
+
+	if (info->fb[HEAD_PANEL] == NULL &&
+	    info->fb[HEAD_CRT] == NULL) {
+		dev_err(dev, "no framebuffers found\n");
+		ret = -ENODEV;
+		goto err_alloc;
+	}
+
+	/* get the resources for both of the framebuffers */
+
+	ret = sm501fb_start(info, pdev);
+	if (ret) {
+		dev_err(dev, "cannot initialise SM501\n");
+		goto err_probed_panel;
+	}
+
+	ret = sm501fb_start_one(info, HEAD_CRT, driver_name_crt);
+	if (ret) {
+		dev_err(dev, "failed to start CRT\n");
+		goto err_started;
+	}
+
+	ret = sm501fb_start_one(info, HEAD_PANEL, driver_name_pnl);
+	if (ret) {
+		dev_err(dev, "failed to start Panel\n");
+		goto err_started_crt;
+	}
+
+	/* create device files */
+
+	ret = device_create_file(dev, &dev_attr_crt_src);
+	if (ret)
+		goto err_started_panel;
+
+	ret = device_create_file(dev, &dev_attr_fbregs_pnl);
+	if (ret)
+		goto err_attached_crtsrc_file;
+
+	ret = device_create_file(dev, &dev_attr_fbregs_crt);
+	if (ret)
+		goto err_attached_pnlregs_file;
+
+	/* we registered, return ok */
+	return 0;
+
+err_attached_pnlregs_file:
+	device_remove_file(dev, &dev_attr_fbregs_pnl);
+
+err_attached_crtsrc_file:
+	device_remove_file(dev, &dev_attr_crt_src);
+
+err_started_panel:
+	unregister_framebuffer(info->fb[HEAD_PANEL]);
+	sm501_free_init_fb(info, HEAD_PANEL);
+
+err_started_crt:
+	unregister_framebuffer(info->fb[HEAD_CRT]);
+	sm501_free_init_fb(info, HEAD_CRT);
+
+err_started:
+	sm501fb_stop(info);
+
+err_probed_panel:
+	framebuffer_release(info->fb[HEAD_PANEL]);
+
+err_probed_crt:
+	framebuffer_release(info->fb[HEAD_CRT]);
+
+err_alloc:
+	kfree(info);
+
+	return ret;
+}
+
+
+/*
+ *  Cleanup
+ */
+static int sm501fb_remove(struct platform_device *pdev)
+{
+	struct sm501fb_info *info = platform_get_drvdata(pdev);
+	struct fb_info	   *fbinfo_crt = info->fb[0];
+	struct fb_info	   *fbinfo_pnl = info->fb[1];
+
+	device_remove_file(&pdev->dev, &dev_attr_fbregs_crt);
+	device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
+	device_remove_file(&pdev->dev, &dev_attr_crt_src);
+
+	sm501_free_init_fb(info, HEAD_CRT);
+	sm501_free_init_fb(info, HEAD_PANEL);
+
+	unregister_framebuffer(fbinfo_crt);
+	unregister_framebuffer(fbinfo_pnl);
+
+	sm501fb_stop(info);
+	kfree(info);
+
+	framebuffer_release(fbinfo_pnl);
+	framebuffer_release(fbinfo_crt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int sm501fb_suspend_fb(struct sm501fb_info *info,
+			      enum sm501_controller head)
+{
+	struct fb_info *fbi = info->fb[head];
+	struct sm501fb_par *par = fbi->par;
+
+	if (par->screen.size == 0)
+		return 0;
+
+	/* blank the relevant interface to ensure unit power minimised */
+	(par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi);
+
+	/* tell console/fb driver we are suspending */
+
+	console_lock();
+	fb_set_suspend(fbi, 1);
+	console_unlock();
+
+	/* backup copies in case chip is powered down over suspend */
+
+	par->store_fb = vmalloc(par->screen.size);
+	if (par->store_fb == NULL) {
+		dev_err(info->dev, "no memory to store screen\n");
+		return -ENOMEM;
+	}
+
+	par->store_cursor = vmalloc(par->cursor.size);
+	if (par->store_cursor == NULL) {
+		dev_err(info->dev, "no memory to store cursor\n");
+		goto err_nocursor;
+	}
+
+	dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb);
+	dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor);
+
+	memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size);
+	memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size);
+
+	return 0;
+
+ err_nocursor:
+	vfree(par->store_fb);
+	par->store_fb = NULL;
+
+	return -ENOMEM;
+}
+
+static void sm501fb_resume_fb(struct sm501fb_info *info,
+			      enum sm501_controller head)
+{
+	struct fb_info *fbi = info->fb[head];
+	struct sm501fb_par *par = fbi->par;
+
+	if (par->screen.size == 0)
+		return;
+
+	/* re-activate the configuration */
+
+	(par->ops.fb_set_par)(fbi);
+
+	/* restore the data */
+
+	dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb);
+	dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor);
+
+	if (par->store_fb)
+		memcpy_toio(par->screen.k_addr, par->store_fb,
+			    par->screen.size);
+
+	if (par->store_cursor)
+		memcpy_toio(par->cursor.k_addr, par->store_cursor,
+			    par->cursor.size);
+
+	console_lock();
+	fb_set_suspend(fbi, 0);
+	console_unlock();
+
+	vfree(par->store_fb);
+	vfree(par->store_cursor);
+}
+
+
+/* suspend and resume support */
+
+static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct sm501fb_info *info = platform_get_drvdata(pdev);
+
+	/* store crt control to resume with */
+	info->pm_crt_ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
+
+	sm501fb_suspend_fb(info, HEAD_CRT);
+	sm501fb_suspend_fb(info, HEAD_PANEL);
+
+	/* turn off the clocks, in case the device is not powered down */
+	sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
+
+	return 0;
+}
+
+#define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP |        \
+			     SM501_DC_CRT_CONTROL_SEL)
+
+
+static int sm501fb_resume(struct platform_device *pdev)
+{
+	struct sm501fb_info *info = platform_get_drvdata(pdev);
+	unsigned long crt_ctrl;
+
+	sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1);
+
+	/* restore the items we want to be saved for crt control */
+
+	crt_ctrl = smc501_readl(info->regs + SM501_DC_CRT_CONTROL);
+	crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
+	crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
+	smc501_writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
+
+	sm501fb_resume_fb(info, HEAD_CRT);
+	sm501fb_resume_fb(info, HEAD_PANEL);
+
+	return 0;
+}
+
+#else
+#define sm501fb_suspend NULL
+#define sm501fb_resume  NULL
+#endif
+
+static struct platform_driver sm501fb_driver = {
+	.probe		= sm501fb_probe,
+	.remove		= sm501fb_remove,
+	.suspend	= sm501fb_suspend,
+	.resume		= sm501fb_resume,
+	.driver		= {
+		.name	= "sm501-fb",
+	},
+};
+
+module_platform_driver(sm501fb_driver);
+
+module_param_named(mode, fb_mode, charp, 0);
+MODULE_PARM_DESC(mode,
+	"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+module_param_named(bpp, default_bpp, ulong, 0);
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
+MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
+MODULE_DESCRIPTION("SM501 Framebuffer driver");
+MODULE_LICENSE("GPL v2");