Initial import

1 files changed, 210 insertions, 0 deletions

diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 000000000..ffb093e72
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,210 @@
+config SQUASHFS
+	tristate "SquashFS 4.0 - Squashed file system support"
+	depends on BLOCK
+	help
+	  Saying Y here includes support for SquashFS 4.0 (a Compressed
+	  Read-Only File System).  Squashfs is a highly compressed read-only
+	  filesystem for Linux.  It uses zlib, lzo or xz compression to
+	  compress both files, inodes and directories.  Inodes in the system
+	  are very small and all blocks are packed to minimise data overhead.
+	  Block sizes greater than 4K are supported up to a maximum of 1 Mbytes
+	  (default block size 128K).  SquashFS 4.0 supports 64 bit filesystems
+	  and files (larger than 4GB), full uid/gid information, hard links and
+	  timestamps.
+
+	  Squashfs is intended for general read-only filesystem use, for
+	  archival use (i.e. in cases where a .tar.gz file may be used), and in
+	  embedded systems where low overhead is needed.  Further information
+	  and tools are available from http://squashfs.sourceforge.net.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here.  The module will be called squashfs.  Note that the root
+	  file system (the one containing the directory /) cannot be compiled
+	  as a module.
+
+	  If unsure, say N.
+
+choice
+	prompt "File decompression options"
+	depends on SQUASHFS
+	help
+	  Squashfs now supports two options for decompressing file
+	  data.  Traditionally Squashfs has decompressed into an
+	  intermediate buffer and then memcopied it into the page cache.
+	  Squashfs now supports the ability to decompress directly into
+	  the page cache.
+
+	  If unsure, select "Decompress file data into an intermediate buffer"
+
+config SQUASHFS_FILE_CACHE
+	bool "Decompress file data into an intermediate buffer"
+	help
+	  Decompress file data into an intermediate buffer and then
+	  memcopy it into the page cache.
+
+config SQUASHFS_FILE_DIRECT
+	bool "Decompress files directly into the page cache"
+	help
+	  Directly decompress file data into the page cache.
+	  Doing so can significantly improve performance because
+	  it eliminates a memcpy and it also removes the lock contention
+	  on the single buffer.
+
+endchoice
+
+choice
+	prompt "Decompressor parallelisation options"
+	depends on SQUASHFS
+	help
+	  Squashfs now supports three parallelisation options for
+	  decompression.  Each one exhibits various trade-offs between
+	  decompression performance and CPU and memory usage.
+
+	  If in doubt, select "Single threaded compression"
+
+config SQUASHFS_DECOMP_SINGLE
+	bool "Single threaded compression"
+	help
+	  Traditionally Squashfs has used single-threaded decompression.
+	  Only one block (data or metadata) can be decompressed at any
+	  one time.  This limits CPU and memory usage to a minimum.
+
+config SQUASHFS_DECOMP_MULTI
+	bool "Use multiple decompressors for parallel I/O"
+	help
+	  By default Squashfs uses a single decompressor but it gives
+	  poor performance on parallel I/O workloads when using multiple CPU
+	  machines due to waiting on decompressor availability.
+
+	  If you have a parallel I/O workload and your system has enough memory,
+	  using this option may improve overall I/O performance.
+
+	  This decompressor implementation uses up to two parallel
+	  decompressors per core.  It dynamically allocates decompressors
+	  on a demand basis.
+
+config SQUASHFS_DECOMP_MULTI_PERCPU
+	bool "Use percpu multiple decompressors for parallel I/O"
+	help
+	  By default Squashfs uses a single decompressor but it gives
+	  poor performance on parallel I/O workloads when using multiple CPU
+	  machines due to waiting on decompressor availability.
+
+	  This decompressor implementation uses a maximum of one
+	  decompressor per core.  It uses percpu variables to ensure
+	  decompression is load-balanced across the cores.
+
+endchoice
+
+config SQUASHFS_XATTR
+	bool "Squashfs XATTR support"
+	depends on SQUASHFS
+	help
+	  Saying Y here includes support for extended attributes (xattrs).
+	  Xattrs are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page).
+
+	  If unsure, say N.
+
+config SQUASHFS_ZLIB
+	bool "Include support for ZLIB compressed file systems"
+	depends on SQUASHFS
+	select ZLIB_INFLATE
+	default y
+	help
+	  ZLIB compression is the standard compression used by Squashfs
+	  file systems.  It offers a good trade-off between compression
+	  achieved and the amount of CPU time and memory necessary to
+	  compress and decompress.
+
+	  If unsure, say Y.
+
+config SQUASHFS_LZ4
+	bool "Include support for LZ4 compressed file systems"
+	depends on SQUASHFS
+	select LZ4_DECOMPRESS
+	help
+	  Saying Y here includes support for reading Squashfs file systems
+	  compressed with LZ4 compression.  LZ4 compression is mainly
+	  aimed at embedded systems with slower CPUs where the overheads
+	  of zlib are too high.
+
+	  LZ4 is not the standard compression used in Squashfs and so most
+	  file systems will be readable without selecting this option.
+
+	  If unsure, say N.
+
+config SQUASHFS_LZO
+	bool "Include support for LZO compressed file systems"
+	depends on SQUASHFS
+	select LZO_DECOMPRESS
+	help
+	  Saying Y here includes support for reading Squashfs file systems
+	  compressed with LZO compression.  LZO compression is mainly
+	  aimed at embedded systems with slower CPUs where the overheads
+	  of zlib are too high.
+
+	  LZO is not the standard compression used in Squashfs and so most
+	  file systems will be readable without selecting this option.
+
+	  If unsure, say N.
+
+config SQUASHFS_XZ
+	bool "Include support for XZ compressed file systems"
+	depends on SQUASHFS
+	select XZ_DEC
+	help
+	  Saying Y here includes support for reading Squashfs file systems
+	  compressed with XZ compression.  XZ gives better compression than
+	  the default zlib compression, at the expense of greater CPU and
+	  memory overhead.
+
+	  XZ is not the standard compression used in Squashfs and so most
+	  file systems will be readable without selecting this option.
+
+	  If unsure, say N.
+
+config SQUASHFS_4K_DEVBLK_SIZE
+	bool "Use 4K device block size?"
+	depends on SQUASHFS
+	help
+	  By default Squashfs sets the dev block size (sb_min_blocksize)
+	  to 1K or the smallest block size supported by the block device
+	  (if larger).  This, because blocks are packed together and
+	  unaligned in Squashfs, should reduce latency.
+
+	  This, however, gives poor performance on MTD NAND devices where
+	  the optimal I/O size is 4K (even though the devices can support
+	  smaller block sizes).
+
+	  Using a 4K device block size may also improve overall I/O
+	  performance for some file access patterns (e.g. sequential
+	  accesses of files in filesystem order) on all media.
+
+	  Setting this option will force Squashfs to use a 4K device block
+	  size by default.
+
+	  If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+	bool "Additional option for memory-constrained systems"
+	depends on SQUASHFS
+	help
+	  Saying Y here allows you to specify cache size.
+
+	  If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
+	depends on SQUASHFS
+	default "3"
+	help
+	  By default SquashFS caches the last 3 fragments read from
+	  the filesystem.  Increasing this amount may mean SquashFS
+	  has to re-read fragments less often from disk, at the expense
+	  of extra system memory.  Decreasing this amount will mean
+	  SquashFS uses less memory at the expense of extra reads from disk.
+
+	  Note there must be at least one cached fragment.  Anything
+	  much more than three will probably not make much difference.