summaryrefslogtreecommitdiff
path: root/fs/squashfs/Kconfig
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /fs/squashfs/Kconfig
Initial import
Diffstat (limited to 'fs/squashfs/Kconfig')
-rw-r--r--fs/squashfs/Kconfig210
1 files changed, 210 insertions, 0 deletions
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 000000000..ffb093e72
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,210 @@
+config SQUASHFS
+ tristate "SquashFS 4.0 - Squashed file system support"
+ depends on BLOCK
+ help
+ Saying Y here includes support for SquashFS 4.0 (a Compressed
+ Read-Only File System). Squashfs is a highly compressed read-only
+ filesystem for Linux. It uses zlib, lzo or xz compression to
+ compress both files, inodes and directories. Inodes in the system
+ are very small and all blocks are packed to minimise data overhead.
+ Block sizes greater than 4K are supported up to a maximum of 1 Mbytes
+ (default block size 128K). SquashFS 4.0 supports 64 bit filesystems
+ and files (larger than 4GB), full uid/gid information, hard links and
+ timestamps.
+
+ Squashfs is intended for general read-only filesystem use, for
+ archival use (i.e. in cases where a .tar.gz file may be used), and in
+ embedded systems where low overhead is needed. Further information
+ and tools are available from http://squashfs.sourceforge.net.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here. The module will be called squashfs. Note that the root
+ file system (the one containing the directory /) cannot be compiled
+ as a module.
+
+ If unsure, say N.
+
+choice
+ prompt "File decompression options"
+ depends on SQUASHFS
+ help
+ Squashfs now supports two options for decompressing file
+ data. Traditionally Squashfs has decompressed into an
+ intermediate buffer and then memcopied it into the page cache.
+ Squashfs now supports the ability to decompress directly into
+ the page cache.
+
+ If unsure, select "Decompress file data into an intermediate buffer"
+
+config SQUASHFS_FILE_CACHE
+ bool "Decompress file data into an intermediate buffer"
+ help
+ Decompress file data into an intermediate buffer and then
+ memcopy it into the page cache.
+
+config SQUASHFS_FILE_DIRECT
+ bool "Decompress files directly into the page cache"
+ help
+ Directly decompress file data into the page cache.
+ Doing so can significantly improve performance because
+ it eliminates a memcpy and it also removes the lock contention
+ on the single buffer.
+
+endchoice
+
+choice
+ prompt "Decompressor parallelisation options"
+ depends on SQUASHFS
+ help
+ Squashfs now supports three parallelisation options for
+ decompression. Each one exhibits various trade-offs between
+ decompression performance and CPU and memory usage.
+
+ If in doubt, select "Single threaded compression"
+
+config SQUASHFS_DECOMP_SINGLE
+ bool "Single threaded compression"
+ help
+ Traditionally Squashfs has used single-threaded decompression.
+ Only one block (data or metadata) can be decompressed at any
+ one time. This limits CPU and memory usage to a minimum.
+
+config SQUASHFS_DECOMP_MULTI
+ bool "Use multiple decompressors for parallel I/O"
+ help
+ By default Squashfs uses a single decompressor but it gives
+ poor performance on parallel I/O workloads when using multiple CPU
+ machines due to waiting on decompressor availability.
+
+ If you have a parallel I/O workload and your system has enough memory,
+ using this option may improve overall I/O performance.
+
+ This decompressor implementation uses up to two parallel
+ decompressors per core. It dynamically allocates decompressors
+ on a demand basis.
+
+config SQUASHFS_DECOMP_MULTI_PERCPU
+ bool "Use percpu multiple decompressors for parallel I/O"
+ help
+ By default Squashfs uses a single decompressor but it gives
+ poor performance on parallel I/O workloads when using multiple CPU
+ machines due to waiting on decompressor availability.
+
+ This decompressor implementation uses a maximum of one
+ decompressor per core. It uses percpu variables to ensure
+ decompression is load-balanced across the cores.
+
+endchoice
+
+config SQUASHFS_XATTR
+ bool "Squashfs XATTR support"
+ depends on SQUASHFS
+ help
+ Saying Y here includes support for extended attributes (xattrs).
+ Xattrs are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page).
+
+ If unsure, say N.
+
+config SQUASHFS_ZLIB
+ bool "Include support for ZLIB compressed file systems"
+ depends on SQUASHFS
+ select ZLIB_INFLATE
+ default y
+ help
+ ZLIB compression is the standard compression used by Squashfs
+ file systems. It offers a good trade-off between compression
+ achieved and the amount of CPU time and memory necessary to
+ compress and decompress.
+
+ If unsure, say Y.
+
+config SQUASHFS_LZ4
+ bool "Include support for LZ4 compressed file systems"
+ depends on SQUASHFS
+ select LZ4_DECOMPRESS
+ help
+ Saying Y here includes support for reading Squashfs file systems
+ compressed with LZ4 compression. LZ4 compression is mainly
+ aimed at embedded systems with slower CPUs where the overheads
+ of zlib are too high.
+
+ LZ4 is not the standard compression used in Squashfs and so most
+ file systems will be readable without selecting this option.
+
+ If unsure, say N.
+
+config SQUASHFS_LZO
+ bool "Include support for LZO compressed file systems"
+ depends on SQUASHFS
+ select LZO_DECOMPRESS
+ help
+ Saying Y here includes support for reading Squashfs file systems
+ compressed with LZO compression. LZO compression is mainly
+ aimed at embedded systems with slower CPUs where the overheads
+ of zlib are too high.
+
+ LZO is not the standard compression used in Squashfs and so most
+ file systems will be readable without selecting this option.
+
+ If unsure, say N.
+
+config SQUASHFS_XZ
+ bool "Include support for XZ compressed file systems"
+ depends on SQUASHFS
+ select XZ_DEC
+ help
+ Saying Y here includes support for reading Squashfs file systems
+ compressed with XZ compression. XZ gives better compression than
+ the default zlib compression, at the expense of greater CPU and
+ memory overhead.
+
+ XZ is not the standard compression used in Squashfs and so most
+ file systems will be readable without selecting this option.
+
+ If unsure, say N.
+
+config SQUASHFS_4K_DEVBLK_SIZE
+ bool "Use 4K device block size?"
+ depends on SQUASHFS
+ help
+ By default Squashfs sets the dev block size (sb_min_blocksize)
+ to 1K or the smallest block size supported by the block device
+ (if larger). This, because blocks are packed together and
+ unaligned in Squashfs, should reduce latency.
+
+ This, however, gives poor performance on MTD NAND devices where
+ the optimal I/O size is 4K (even though the devices can support
+ smaller block sizes).
+
+ Using a 4K device block size may also improve overall I/O
+ performance for some file access patterns (e.g. sequential
+ accesses of files in filesystem order) on all media.
+
+ Setting this option will force Squashfs to use a 4K device block
+ size by default.
+
+ If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+ bool "Additional option for memory-constrained systems"
+ depends on SQUASHFS
+ help
+ Saying Y here allows you to specify cache size.
+
+ If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+ int "Number of fragments cached" if SQUASHFS_EMBEDDED
+ depends on SQUASHFS
+ default "3"
+ help
+ By default SquashFS caches the last 3 fragments read from
+ the filesystem. Increasing this amount may mean SquashFS
+ has to re-read fragments less often from disk, at the expense
+ of extra system memory. Decreasing this amount will mean
+ SquashFS uses less memory at the expense of extra reads from disk.
+
+ Note there must be at least one cached fragment. Anything
+ much more than three will probably not make much difference.