Initial import

1 files changed, 761 insertions, 0 deletions

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
new file mode 100644
index 000000000..523f04c90
--- /dev/null
+++ b/include/drm/drm_dp_helper.h
@@ -0,0 +1,761 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_HELPER_H_
+#define _DRM_DP_HELPER_H_
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+/*
+ * Unless otherwise noted, all values are from the DP 1.1a spec.  Note that
+ * DP and DPCD versions are independent.  Differences from 1.0 are not noted,
+ * 1.0 devices basically don't exist in the wild.
+ *
+ * Abbreviations, in chronological order:
+ *
+ * eDP: Embedded DisplayPort version 1
+ * DPI: DisplayPort Interoperability Guideline v1.1a
+ * 1.2: DisplayPort 1.2
+ * MST: Multistream Transport - part of DP 1.2a
+ *
+ * 1.2 formally includes both eDP and DPI definitions.
+ */
+
+#define DP_AUX_MAX_PAYLOAD_BYTES	16
+
+#define DP_AUX_I2C_WRITE		0x0
+#define DP_AUX_I2C_READ			0x1
+#define DP_AUX_I2C_STATUS		0x2
+#define DP_AUX_I2C_MOT			0x4
+#define DP_AUX_NATIVE_WRITE		0x8
+#define DP_AUX_NATIVE_READ		0x9
+
+#define DP_AUX_NATIVE_REPLY_ACK		(0x0 << 0)
+#define DP_AUX_NATIVE_REPLY_NACK	(0x1 << 0)
+#define DP_AUX_NATIVE_REPLY_DEFER	(0x2 << 0)
+#define DP_AUX_NATIVE_REPLY_MASK	(0x3 << 0)
+
+#define DP_AUX_I2C_REPLY_ACK		(0x0 << 2)
+#define DP_AUX_I2C_REPLY_NACK		(0x1 << 2)
+#define DP_AUX_I2C_REPLY_DEFER		(0x2 << 2)
+#define DP_AUX_I2C_REPLY_MASK		(0x3 << 2)
+
+/* AUX CH addresses */
+/* DPCD */
+#define DP_DPCD_REV                         0x000
+
+#define DP_MAX_LINK_RATE                    0x001
+
+#define DP_MAX_LANE_COUNT                   0x002
+# define DP_MAX_LANE_COUNT_MASK		    0x1f
+# define DP_TPS3_SUPPORTED		    (1 << 6) /* 1.2 */
+# define DP_ENHANCED_FRAME_CAP		    (1 << 7)
+
+#define DP_MAX_DOWNSPREAD                   0x003
+# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING  (1 << 6)
+
+#define DP_NORP                             0x004
+
+#define DP_DOWNSTREAMPORT_PRESENT           0x005
+# define DP_DWN_STRM_PORT_PRESENT           (1 << 0)
+# define DP_DWN_STRM_PORT_TYPE_MASK         0x06
+# define DP_DWN_STRM_PORT_TYPE_DP           (0 << 1)
+# define DP_DWN_STRM_PORT_TYPE_ANALOG       (1 << 1)
+# define DP_DWN_STRM_PORT_TYPE_TMDS         (2 << 1)
+# define DP_DWN_STRM_PORT_TYPE_OTHER        (3 << 1)
+# define DP_FORMAT_CONVERSION               (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE	    (1 << 4) /* DPI */
+
+#define DP_MAIN_LINK_CHANNEL_CODING         0x006
+
+#define DP_DOWN_STREAM_PORT_COUNT	    0x007
+# define DP_PORT_COUNT_MASK		    0x0f
+# define DP_MSA_TIMING_PAR_IGNORED	    (1 << 6) /* eDP */
+# define DP_OUI_SUPPORT			    (1 << 7)
+
+#define DP_RECEIVE_PORT_0_CAP_0		    0x008
+# define DP_LOCAL_EDID_PRESENT		    (1 << 1)
+# define DP_ASSOCIATED_TO_PRECEDING_PORT    (1 << 2)
+
+#define DP_RECEIVE_PORT_0_BUFFER_SIZE	    0x009
+
+#define DP_RECEIVE_PORT_1_CAP_0		    0x00a
+#define DP_RECEIVE_PORT_1_BUFFER_SIZE       0x00b
+
+#define DP_I2C_SPEED_CAP		    0x00c    /* DPI */
+# define DP_I2C_SPEED_1K		    0x01
+# define DP_I2C_SPEED_5K		    0x02
+# define DP_I2C_SPEED_10K		    0x04
+# define DP_I2C_SPEED_100K		    0x08
+# define DP_I2C_SPEED_400K		    0x10
+# define DP_I2C_SPEED_1M		    0x20
+
+#define DP_EDP_CONFIGURATION_CAP            0x00d   /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_CAP   (1 << 0)
+# define DP_FRAMING_CHANGE_CAP		    (1 << 1)
+# define DP_DPCD_DISPLAY_CONTROL_CAPABLE     (1 << 3) /* edp v1.2 or higher */
+
+#define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
+
+#define DP_ADAPTER_CAP			    0x00f   /* 1.2 */
+# define DP_FORCE_LOAD_SENSE_CAP	    (1 << 0)
+# define DP_ALTERNATE_I2C_PATTERN_CAP	    (1 << 1)
+
+#define DP_SUPPORTED_LINK_RATES		    0x010 /* eDP 1.4 */
+# define DP_MAX_SUPPORTED_RATES		     8	    /* 16-bit little-endian */
+
+/* Multiple stream transport */
+#define DP_FAUX_CAP			    0x020   /* 1.2 */
+# define DP_FAUX_CAP_1			    (1 << 0)
+
+#define DP_MSTM_CAP			    0x021   /* 1.2 */
+# define DP_MST_CAP			    (1 << 0)
+
+#define DP_NUMBER_OF_AUDIO_ENDPOINTS	    0x022   /* 1.2 */
+
+/* AV_SYNC_DATA_BLOCK                                  1.2 */
+#define DP_AV_GRANULARITY		    0x023
+# define DP_AG_FACTOR_MASK		    (0xf << 0)
+# define DP_AG_FACTOR_3MS		    (0 << 0)
+# define DP_AG_FACTOR_2MS		    (1 << 0)
+# define DP_AG_FACTOR_1MS		    (2 << 0)
+# define DP_AG_FACTOR_500US		    (3 << 0)
+# define DP_AG_FACTOR_200US		    (4 << 0)
+# define DP_AG_FACTOR_100US		    (5 << 0)
+# define DP_AG_FACTOR_10US		    (6 << 0)
+# define DP_AG_FACTOR_1US		    (7 << 0)
+# define DP_VG_FACTOR_MASK		    (0xf << 4)
+# define DP_VG_FACTOR_3MS		    (0 << 4)
+# define DP_VG_FACTOR_2MS		    (1 << 4)
+# define DP_VG_FACTOR_1MS		    (2 << 4)
+# define DP_VG_FACTOR_500US		    (3 << 4)
+# define DP_VG_FACTOR_200US		    (4 << 4)
+# define DP_VG_FACTOR_100US		    (5 << 4)
+
+#define DP_AUD_DEC_LAT0			    0x024
+#define DP_AUD_DEC_LAT1			    0x025
+
+#define DP_AUD_PP_LAT0			    0x026
+#define DP_AUD_PP_LAT1			    0x027
+
+#define DP_VID_INTER_LAT		    0x028
+
+#define DP_VID_PROG_LAT			    0x029
+
+#define DP_REP_LAT			    0x02a
+
+#define DP_AUD_DEL_INS0			    0x02b
+#define DP_AUD_DEL_INS1			    0x02c
+#define DP_AUD_DEL_INS2			    0x02d
+/* End of AV_SYNC_DATA_BLOCK */
+
+#define DP_RECEIVER_ALPM_CAP		    0x02e   /* eDP 1.4 */
+# define DP_ALPM_CAP			    (1 << 0)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP   0x02f   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_CAP		    (1 << 0)
+
+#define DP_GUID				    0x030   /* 1.2 */
+
+#define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
+# define DP_PSR_IS_SUPPORTED                1
+# define DP_PSR2_IS_SUPPORTED		    2	    /* eDP 1.4 */
+
+#define DP_PSR_CAPS                         0x071   /* XXX 1.2? */
+# define DP_PSR_NO_TRAIN_ON_EXIT            1
+# define DP_PSR_SETUP_TIME_330              (0 << 1)
+# define DP_PSR_SETUP_TIME_275              (1 << 1)
+# define DP_PSR_SETUP_TIME_220              (2 << 1)
+# define DP_PSR_SETUP_TIME_165              (3 << 1)
+# define DP_PSR_SETUP_TIME_110              (4 << 1)
+# define DP_PSR_SETUP_TIME_55               (5 << 1)
+# define DP_PSR_SETUP_TIME_0                (6 << 1)
+# define DP_PSR_SETUP_TIME_MASK             (7 << 1)
+# define DP_PSR_SETUP_TIME_SHIFT            1
+
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was not,
+ * each port's descriptor is one byte wide.  If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info.  As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0		    0x80
+# define DP_DS_PORT_TYPE_MASK		    (7 << 0)
+# define DP_DS_PORT_TYPE_DP		    0
+# define DP_DS_PORT_TYPE_VGA		    1
+# define DP_DS_PORT_TYPE_DVI		    2
+# define DP_DS_PORT_TYPE_HDMI		    3
+# define DP_DS_PORT_TYPE_NON_EDID	    4
+# define DP_DS_PORT_HPD			    (1 << 3)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 2 */
+# define DP_DS_VGA_MAX_BPC_MASK		    (3 << 0)
+# define DP_DS_VGA_8BPC			    0
+# define DP_DS_VGA_10BPC		    1
+# define DP_DS_VGA_12BPC		    2
+# define DP_DS_VGA_16BPC		    3
+
+/* link configuration */
+#define	DP_LINK_BW_SET		            0x100
+# define DP_LINK_RATE_TABLE		    0x00    /* eDP 1.4 */
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+# define DP_LINK_BW_5_4			    0x14    /* 1.2 */
+
+#define DP_LANE_COUNT_SET	            0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	            0x102
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_3		    3	    /* 1.2 */
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
+# define DP_LINK_QUAL_PATTERN_11_DISABLE    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_11_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
+# define DP_LINK_QUAL_PATTERN_11_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_11_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_0		(0 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_1		(1 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_2		(2 << 3)
+# define DP_TRAIN_PRE_EMPH_LEVEL_3		(3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN	    (1 << 7) /* eDP */
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_I2C_SPEED_CONTROL_STATUS	    0x109   /* DPI */
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET            0x10a   /* XXX 1.2? */
+# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
+# define DP_FRAMING_CHANGE_ENABLE	    (1 << 1)
+# define DP_PANEL_SELF_TEST_ENABLE	    (1 << 7)
+
+#define DP_LINK_QUAL_LANE0_SET		    0x10b   /* DPCD >= 1.2 */
+#define DP_LINK_QUAL_LANE1_SET		    0x10c
+#define DP_LINK_QUAL_LANE2_SET		    0x10d
+#define DP_LINK_QUAL_LANE3_SET		    0x10e
+# define DP_LINK_QUAL_PATTERN_DISABLE	    0
+# define DP_LINK_QUAL_PATTERN_D10_2	    1
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    2
+# define DP_LINK_QUAL_PATTERN_PRBS7	    3
+# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM  4
+# define DP_LINK_QUAL_PATTERN_HBR2_EYE      5
+# define DP_LINK_QUAL_PATTERN_MASK	    7
+
+#define DP_TRAINING_LANE0_1_SET2	    0x10f
+#define DP_TRAINING_LANE2_3_SET2	    0x110
+# define DP_LANE02_POST_CURSOR2_SET_MASK    (3 << 0)
+# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2)
+# define DP_LANE13_POST_CURSOR2_SET_MASK    (3 << 4)
+# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6)
+
+#define DP_MSTM_CTRL			    0x111   /* 1.2 */
+# define DP_MST_EN			    (1 << 0)
+# define DP_UP_REQ_EN			    (1 << 1)
+# define DP_UPSTREAM_IS_SRC		    (1 << 2)
+
+#define DP_AUDIO_DELAY0			    0x112   /* 1.2 */
+#define DP_AUDIO_DELAY1			    0x113
+#define DP_AUDIO_DELAY2			    0x114
+
+#define DP_LINK_RATE_SET		    0x115   /* eDP 1.4 */
+# define DP_LINK_RATE_SET_SHIFT		    0
+# define DP_LINK_RATE_SET_MASK		    (7 << 0)
+
+#define DP_RECEIVER_ALPM_CONFIG		    0x116   /* eDP 1.4 */
+# define DP_ALPM_ENABLE			    (1 << 0)
+# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE  (1 << 1)
+
+#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF  0x117   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_ENABLE	    (1 << 0)
+# define DP_IRQ_HPD_ENABLE		    (1 << 1)
+
+#define DP_UPSTREAM_DEVICE_DP_PWR_NEED	    0x118   /* 1.2 */
+# define DP_PWR_NOT_NEEDED		    (1 << 0)
+
+#define DP_AUX_FRAME_SYNC_VALUE		    0x15c   /* eDP 1.4 */
+# define DP_AUX_FRAME_SYNC_VALID	    (1 << 0)
+
+#define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
+# define DP_PSR_ENABLE			    (1 << 0)
+# define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
+# define DP_PSR_CRC_VERIFICATION	    (1 << 2)
+# define DP_PSR_FRAME_CAPTURE		    (1 << 3)
+# define DP_PSR_SELECTIVE_UPDATE	    (1 << 4)
+# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS     (1 << 5)
+
+#define DP_ADAPTER_CTRL			    0x1a0
+# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE   (1 << 0)
+
+#define DP_BRANCH_DEVICE_CTRL		    0x1a1
+# define DP_BRANCH_DEVICE_IRQ_HPD	    (1 << 0)
+
+#define DP_PAYLOAD_ALLOCATE_SET		    0x1c0
+#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1
+#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2
+
+#define DP_SINK_COUNT			    0x200
+/* prior to 1.2 bit 7 was reserved mbz */
+# define DP_GET_SINK_COUNT(x)		    ((((x) & 0x80) >> 1) | ((x) & 0x3f))
+# define DP_SINK_CP_READY		    (1 << 6)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR	    0x201
+# define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
+# define DP_AUTOMATED_TEST_REQUEST	    (1 << 1)
+# define DP_CP_IRQ			    (1 << 2)
+# define DP_MCCS_IRQ			    (1 << 3)
+# define DP_DOWN_REP_MSG_RDY		    (1 << 4) /* 1.2 MST */
+# define DP_UP_REQ_MSG_RDY		    (1 << 5) /* 1.2 MST */
+# define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |		\
+			    DP_LANE_CHANNEL_EQ_DONE |	\
+			    DP_LANE_SYMBOL_LOCKED)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+#define DP_TEST_REQUEST			    0x218
+# define DP_TEST_LINK_TRAINING		    (1 << 0)
+# define DP_TEST_LINK_VIDEO_PATTERN	    (1 << 1)
+# define DP_TEST_LINK_EDID_READ		    (1 << 2)
+# define DP_TEST_LINK_PHY_TEST_PATTERN	    (1 << 3) /* DPCD >= 1.1 */
+# define DP_TEST_LINK_FAUX_PATTERN	    (1 << 4) /* DPCD >= 1.2 */
+
+#define DP_TEST_LINK_RATE		    0x219
+# define DP_LINK_RATE_162		    (0x6)
+# define DP_LINK_RATE_27		    (0xa)
+
+#define DP_TEST_LANE_COUNT		    0x220
+
+#define DP_TEST_PATTERN			    0x221
+
+#define DP_TEST_CRC_R_CR		    0x240
+#define DP_TEST_CRC_G_Y			    0x242
+#define DP_TEST_CRC_B_CB		    0x244
+
+#define DP_TEST_SINK_MISC		    0x246
+# define DP_TEST_CRC_SUPPORTED		    (1 << 5)
+# define DP_TEST_COUNT_MASK		    0x7
+
+#define DP_TEST_RESPONSE		    0x260
+# define DP_TEST_ACK			    (1 << 0)
+# define DP_TEST_NAK			    (1 << 1)
+# define DP_TEST_EDID_CHECKSUM_WRITE	    (1 << 2)
+
+#define DP_TEST_EDID_CHECKSUM		    0x261
+
+#define DP_TEST_SINK			    0x270
+# define DP_TEST_SINK_START		    (1 << 0)
+
+#define DP_PAYLOAD_TABLE_UPDATE_STATUS      0x2c0   /* 1.2 MST */
+# define DP_PAYLOAD_TABLE_UPDATED           (1 << 0)
+# define DP_PAYLOAD_ACT_HANDLED             (1 << 1)
+
+#define DP_VC_PAYLOAD_ID_SLOT_1             0x2c1   /* 1.2 MST */
+/* up to ID_SLOT_63 at 0x2ff */
+
+#define DP_SOURCE_OUI			    0x300
+#define DP_SINK_OUI			    0x400
+#define DP_BRANCH_OUI			    0x500
+
+#define DP_SET_POWER                        0x600
+# define DP_SET_POWER_D0                    0x1
+# define DP_SET_POWER_D3                    0x2
+# define DP_SET_POWER_MASK                  0x3
+
+#define DP_EDP_DPCD_REV			    0x700    /* eDP 1.2 */
+# define DP_EDP_11			    0x00
+# define DP_EDP_12			    0x01
+# define DP_EDP_13			    0x02
+# define DP_EDP_14			    0x03
+
+#define DP_EDP_GENERAL_CAP_1		    0x701
+
+#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP     0x702
+
+#define DP_EDP_GENERAL_CAP_2		    0x703
+
+#define DP_EDP_GENERAL_CAP_3		    0x704    /* eDP 1.4 */
+
+#define DP_EDP_DISPLAY_CONTROL_REGISTER     0x720
+
+#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER  0x721
+
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB     0x722
+#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB     0x723
+
+#define DP_EDP_PWMGEN_BIT_COUNT             0x724
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN     0x725
+#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX     0x726
+
+#define DP_EDP_BACKLIGHT_CONTROL_STATUS     0x727
+
+#define DP_EDP_BACKLIGHT_FREQ_SET           0x728
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB   0x72a
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID   0x72b
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB   0x72c
+
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB   0x72d
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID   0x72e
+#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB   0x72f
+
+#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET   0x732
+#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET   0x733
+
+#define DP_EDP_REGIONAL_BACKLIGHT_BASE      0x740    /* eDP 1.4 */
+#define DP_EDP_REGIONAL_BACKLIGHT_0	    0x741    /* eDP 1.4 */
+
+#define DP_SIDEBAND_MSG_DOWN_REQ_BASE	    0x1000   /* 1.2 MST */
+#define DP_SIDEBAND_MSG_UP_REP_BASE	    0x1200   /* 1.2 MST */
+#define DP_SIDEBAND_MSG_DOWN_REP_BASE	    0x1400   /* 1.2 MST */
+#define DP_SIDEBAND_MSG_UP_REQ_BASE	    0x1600   /* 1.2 MST */
+
+#define DP_SINK_COUNT_ESI		    0x2002   /* 1.2 */
+/* 0-5 sink count */
+# define DP_SINK_COUNT_CP_READY             (1 << 6)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0   0x2003   /* 1.2 */
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1   0x2004   /* 1.2 */
+
+#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0     0x2005   /* 1.2 */
+
+#define DP_PSR_ERROR_STATUS                 0x2006  /* XXX 1.2? */
+# define DP_PSR_LINK_CRC_ERROR              (1 << 0)
+# define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
+# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */
+
+#define DP_PSR_ESI                          0x2007  /* XXX 1.2? */
+# define DP_PSR_CAPS_CHANGE                 (1 << 0)
+
+#define DP_PSR_STATUS                       0x2008  /* XXX 1.2? */
+# define DP_PSR_SINK_INACTIVE               0
+# define DP_PSR_SINK_ACTIVE_SRC_SYNCED      1
+# define DP_PSR_SINK_ACTIVE_RFB             2
+# define DP_PSR_SINK_ACTIVE_SINK_SYNCED     3
+# define DP_PSR_SINK_ACTIVE_RESYNC          4
+# define DP_PSR_SINK_INTERNAL_ERROR         7
+# define DP_PSR_SINK_STATE_MASK             0x07
+
+#define DP_RECEIVER_ALPM_STATUS		    0x200b  /* eDP 1.4 */
+# define DP_ALPM_LOCK_TIMEOUT_ERROR	    (1 << 0)
+
+/* DP 1.2 Sideband message defines */
+/* peer device type - DP 1.2a Table 2-92 */
+#define DP_PEER_DEVICE_NONE		0x0
+#define DP_PEER_DEVICE_SOURCE_OR_SST	0x1
+#define DP_PEER_DEVICE_MST_BRANCHING	0x2
+#define DP_PEER_DEVICE_SST_SINK		0x3
+#define DP_PEER_DEVICE_DP_LEGACY_CONV	0x4
+
+/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */
+#define DP_LINK_ADDRESS			0x01
+#define DP_CONNECTION_STATUS_NOTIFY	0x02
+#define DP_ENUM_PATH_RESOURCES		0x10
+#define DP_ALLOCATE_PAYLOAD		0x11
+#define DP_QUERY_PAYLOAD		0x12
+#define DP_RESOURCE_STATUS_NOTIFY	0x13
+#define DP_CLEAR_PAYLOAD_ID_TABLE	0x14
+#define DP_REMOTE_DPCD_READ		0x20
+#define DP_REMOTE_DPCD_WRITE		0x21
+#define DP_REMOTE_I2C_READ		0x22
+#define DP_REMOTE_I2C_WRITE		0x23
+#define DP_POWER_UP_PHY			0x24
+#define DP_POWER_DOWN_PHY		0x25
+#define DP_SINK_EVENT_NOTIFY		0x30
+#define DP_QUERY_STREAM_ENC_STATUS	0x38
+
+/* DP 1.2 MST sideband nak reasons - table 2.84 */
+#define DP_NAK_WRITE_FAILURE		0x01
+#define DP_NAK_INVALID_READ		0x02
+#define DP_NAK_CRC_FAILURE		0x03
+#define DP_NAK_BAD_PARAM		0x04
+#define DP_NAK_DEFER			0x05
+#define DP_NAK_LINK_FAILURE		0x06
+#define DP_NAK_NO_RESOURCES		0x07
+#define DP_NAK_DPCD_FAIL		0x08
+#define DP_NAK_I2C_NAK			0x09
+#define DP_NAK_ALLOCATE_FAIL		0x0a
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+#define DP_LINK_STATUS_SIZE	   6
+bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+			  int lane_count);
+bool drm_dp_clock_recovery_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
+			      int lane_count);
+u8 drm_dp_get_adjust_request_voltage(const u8 link_status[DP_LINK_STATUS_SIZE],
+				     int lane);
+u8 drm_dp_get_adjust_request_pre_emphasis(const u8 link_status[DP_LINK_STATUS_SIZE],
+					  int lane);
+
+#define DP_RECEIVER_CAP_SIZE		0xf
+#define EDP_PSR_RECEIVER_CAP_SIZE	2
+
+void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+
+u8 drm_dp_link_rate_to_bw_code(int link_rate);
+int drm_dp_bw_code_to_link_rate(u8 link_bw);
+
+struct edp_sdp_header {
+	u8 HB0; /* Secondary Data Packet ID */
+	u8 HB1; /* Secondary Data Packet Type */
+	u8 HB2; /* 7:5 reserved, 4:0 revision number */
+	u8 HB3; /* 7:5 reserved, 4:0 number of valid data bytes */
+} __packed;
+
+#define EDP_SDP_HEADER_REVISION_MASK		0x1F
+#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES	0x1F
+
+struct edp_vsc_psr {
+	struct edp_sdp_header sdp_header;
+	u8 DB0; /* Stereo Interface */
+	u8 DB1; /* 0 - PSR State; 1 - Update RFB; 2 - CRC Valid */
+	u8 DB2; /* CRC value bits 7:0 of the R or Cr component */
+	u8 DB3; /* CRC value bits 15:8 of the R or Cr component */
+	u8 DB4; /* CRC value bits 7:0 of the G or Y component */
+	u8 DB5; /* CRC value bits 15:8 of the G or Y component */
+	u8 DB6; /* CRC value bits 7:0 of the B or Cb component */
+	u8 DB7; /* CRC value bits 15:8 of the B or Cb component */
+	u8 DB8_31[24]; /* Reserved */
+} __packed;
+
+#define EDP_VSC_PSR_STATE_ACTIVE	(1<<0)
+#define EDP_VSC_PSR_UPDATE_RFB		(1<<1)
+#define EDP_VSC_PSR_CRC_VALUES_VALID	(1<<2)
+
+static inline int
+drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+	return drm_dp_bw_code_to_link_rate(dpcd[DP_MAX_LINK_RATE]);
+}
+
+static inline u8
+drm_dp_max_lane_count(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+	return dpcd[DP_MAX_LANE_COUNT] & DP_MAX_LANE_COUNT_MASK;
+}
+
+static inline bool
+drm_dp_enhanced_frame_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+	return dpcd[DP_DPCD_REV] >= 0x11 &&
+		(dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP);
+}
+
+/*
+ * DisplayPort AUX channel
+ */
+
+/**
+ * struct drm_dp_aux_msg - DisplayPort AUX channel transaction
+ * @address: address of the (first) register to access
+ * @request: contains the type of transaction (see DP_AUX_* macros)
+ * @reply: upon completion, contains the reply type of the transaction
+ * @buffer: pointer to a transmission or reception buffer
+ * @size: size of @buffer
+ */
+struct drm_dp_aux_msg {
+	unsigned int address;
+	u8 request;
+	u8 reply;
+	void *buffer;
+	size_t size;
+};
+
+/**
+ * struct drm_dp_aux - DisplayPort AUX channel
+ * @name: user-visible name of this AUX channel and the I2C-over-AUX adapter
+ * @ddc: I2C adapter that can be used for I2C-over-AUX communication
+ * @dev: pointer to struct device that is the parent for this AUX channel
+ * @hw_mutex: internal mutex used for locking transfers
+ * @transfer: transfers a message representing a single AUX transaction
+ *
+ * The .dev field should be set to a pointer to the device that implements
+ * the AUX channel.
+ *
+ * The .name field may be used to specify the name of the I2C adapter. If set to
+ * NULL, dev_name() of .dev will be used.
+ *
+ * Drivers provide a hardware-specific implementation of how transactions
+ * are executed via the .transfer() function. A pointer to a drm_dp_aux_msg
+ * structure describing the transaction is passed into this function. Upon
+ * success, the implementation should return the number of payload bytes
+ * that were transferred, or a negative error-code on failure. Helpers
+ * propagate errors from the .transfer() function, with the exception of
+ * the -EBUSY error, which causes a transaction to be retried. On a short,
+ * helpers will return -EPROTO to make it simpler to check for failure.
+ *
+ * An AUX channel can also be used to transport I2C messages to a sink. A
+ * typical application of that is to access an EDID that's present in the
+ * sink device. The .transfer() function can also be used to execute such
+ * transactions. The drm_dp_aux_register_i2c_bus() function registers an
+ * I2C adapter that can be passed to drm_probe_ddc(). Upon removal, drivers
+ * should call drm_dp_aux_unregister_i2c_bus() to remove the I2C adapter.
+ * The I2C adapter uses long transfers by default; if a partial response is
+ * received, the adapter will drop down to the size given by the partial
+ * response for this transaction only.
+ *
+ * Note that the aux helper code assumes that the .transfer() function
+ * only modifies the reply field of the drm_dp_aux_msg structure.  The
+ * retry logic and i2c helpers assume this is the case.
+ */
+struct drm_dp_aux {
+	const char *name;
+	struct i2c_adapter ddc;
+	struct device *dev;
+	struct mutex hw_mutex;
+	ssize_t (*transfer)(struct drm_dp_aux *aux,
+			    struct drm_dp_aux_msg *msg);
+	unsigned i2c_nack_count, i2c_defer_count;
+};
+
+ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
+			 void *buffer, size_t size);
+ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
+			  void *buffer, size_t size);
+
+/**
+ * drm_dp_dpcd_readb() - read a single byte from the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to read
+ * @valuep: location where the value of the register will be stored
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure.
+ */
+static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
+					unsigned int offset, u8 *valuep)
+{
+	return drm_dp_dpcd_read(aux, offset, valuep, 1);
+}
+
+/**
+ * drm_dp_dpcd_writeb() - write a single byte to the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to write
+ * @value: value to write to the register
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure.
+ */
+static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux,
+					 unsigned int offset, u8 value)
+{
+	return drm_dp_dpcd_write(aux, offset, &value, 1);
+}
+
+int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
+				 u8 status[DP_LINK_STATUS_SIZE]);
+
+/*
+ * DisplayPort link
+ */
+#define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
+
+struct drm_dp_link {
+	unsigned char revision;
+	unsigned int rate;
+	unsigned int num_lanes;
+	unsigned long capabilities;
+};
+
+int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link);
+int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link);
+
+int drm_dp_aux_register(struct drm_dp_aux *aux);
+void drm_dp_aux_unregister(struct drm_dp_aux *aux);
+
+#endif /* _DRM_DP_HELPER_H_ */