Initial import

1 files changed, 107 insertions, 0 deletions

diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
new file mode 100644
index 000000000..10fe2a211
--- /dev/null
+++ b/include/linux/amba/pl08x.h
@@ -0,0 +1,107 @@
+/*
+ * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
+ *
+ * Copyright (C) 2005 ARM Ltd
+ * Copyright (C) 2010 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * pl08x information required by platform code
+ *
+ * Please credit ARM.com
+ * Documentation: ARM DDI 0196D
+ */
+
+#ifndef AMBA_PL08X_H
+#define AMBA_PL08X_H
+
+/* We need sizes of structs from this header */
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+struct pl08x_driver_data;
+struct pl08x_phy_chan;
+struct pl08x_txd;
+
+/* Bitmasks for selecting AHB ports for DMA transfers */
+enum {
+	PL08X_AHB1 = (1 << 0),
+	PL08X_AHB2 = (1 << 1)
+};
+
+/**
+ * struct pl08x_channel_data - data structure to pass info between
+ * platform and PL08x driver regarding channel configuration
+ * @bus_id: name of this device channel, not just a device name since
+ * devices may have more than one channel e.g. "foo_tx"
+ * @min_signal: the minimum DMA signal number to be muxed in for this
+ * channel (for platforms supporting muxed signals). If you have
+ * static assignments, make sure this is set to the assigned signal
+ * number, PL08x have 16 possible signals in number 0 thru 15 so
+ * when these are not enough they often get muxed (in hardware)
+ * disabling simultaneous use of the same channel for two devices.
+ * @max_signal: the maximum DMA signal number to be muxed in for
+ * the channel. Set to the same as min_signal for
+ * devices with static assignments
+ * @muxval: a number usually used to poke into some mux regiser to
+ * mux in the signal to this channel
+ * @cctl_memcpy: options for the channel control register for memcpy
+ *  *** not used for slave channels ***
+ * @addr: source/target address in physical memory for this DMA channel,
+ * can be the address of a FIFO register for burst requests for example.
+ * This can be left undefined if the PrimeCell API is used for configuring
+ * this.
+ * @single: the device connected to this channel will request single DMA
+ * transfers, not bursts. (Bursts are default.)
+ * @periph_buses: the device connected to this channel is accessible via
+ * these buses (use PL08X_AHB1 | PL08X_AHB2).
+ */
+struct pl08x_channel_data {
+	const char *bus_id;
+	int min_signal;
+	int max_signal;
+	u32 muxval;
+	u32 cctl_memcpy;
+	dma_addr_t addr;
+	bool single;
+	u8 periph_buses;
+};
+
+/**
+ * struct pl08x_platform_data - the platform configuration for the PL08x
+ * PrimeCells.
+ * @slave_channels: the channels defined for the different devices on the
+ * platform, all inclusive, including multiplexed channels. The available
+ * physical channels will be multiplexed around these signals as they are
+ * requested, just enumerate all possible channels.
+ * @get_xfer_signal: request a physical signal to be used for a DMA transfer
+ * immediately: if there is some multiplexing or similar blocking the use
+ * of the channel the transfer can be denied by returning less than zero,
+ * else it returns the allocated signal number
+ * @put_xfer_signal: indicate to the platform that this physical signal is not
+ * running any DMA transfer and multiplexing can be recycled
+ * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2
+ * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2
+ */
+struct pl08x_platform_data {
+	const struct pl08x_channel_data *slave_channels;
+	unsigned int num_slave_channels;
+	struct pl08x_channel_data memcpy_channel;
+	int (*get_xfer_signal)(const struct pl08x_channel_data *);
+	void (*put_xfer_signal)(const struct pl08x_channel_data *, int);
+	u8 lli_buses;
+	u8 mem_buses;
+};
+
+#ifdef CONFIG_AMBA_PL08X
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
+#else
+static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+	return false;
+}
+#endif
+
+#endif	/* AMBA_PL08X_H */