Initial import

1 files changed, 905 insertions, 0 deletions

diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
new file mode 100644
index 000000000..1da602982
--- /dev/null
+++ b/include/linux/ftrace.h
@@ -0,0 +1,905 @@
+/*
+ * Ftrace header.  For implementation details beyond the random comments
+ * scattered below, see: Documentation/trace/ftrace-design.txt
+ */
+
+#ifndef _LINUX_FTRACE_H
+#define _LINUX_FTRACE_H
+
+#include <linux/trace_clock.h>
+#include <linux/kallsyms.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/ptrace.h>
+#include <linux/ktime.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+
+#include <asm/ftrace.h>
+
+/*
+ * If the arch supports passing the variable contents of
+ * function_trace_op as the third parameter back from the
+ * mcount call, then the arch should define this as 1.
+ */
+#ifndef ARCH_SUPPORTS_FTRACE_OPS
+#define ARCH_SUPPORTS_FTRACE_OPS 0
+#endif
+
+/*
+ * If the arch's mcount caller does not support all of ftrace's
+ * features, then it must call an indirect function that
+ * does. Or at least does enough to prevent any unwelcomed side effects.
+ */
+#if !ARCH_SUPPORTS_FTRACE_OPS
+# define FTRACE_FORCE_LIST_FUNC 1
+#else
+# define FTRACE_FORCE_LIST_FUNC 0
+#endif
+
+/* Main tracing buffer and events set up */
+#ifdef CONFIG_TRACING
+void trace_init(void);
+#else
+static inline void trace_init(void) { }
+#endif
+
+struct module;
+struct ftrace_hash;
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+extern int ftrace_enabled;
+extern int
+ftrace_enable_sysctl(struct ctl_table *table, int write,
+		     void __user *buffer, size_t *lenp,
+		     loff_t *ppos);
+
+struct ftrace_ops;
+
+typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
+			      struct ftrace_ops *op, struct pt_regs *regs);
+
+ftrace_func_t ftrace_ops_get_func(struct ftrace_ops *ops);
+
+/*
+ * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
+ * set in the flags member.
+ * CONTROL, SAVE_REGS, SAVE_REGS_IF_SUPPORTED, RECURSION_SAFE, STUB and
+ * IPMODIFY are a kind of attribute flags which can be set only before
+ * registering the ftrace_ops, and can not be modified while registered.
+ * Changing those attribute flags after regsitering ftrace_ops will
+ * cause unexpected results.
+ *
+ * ENABLED - set/unset when ftrace_ops is registered/unregistered
+ * DYNAMIC - set when ftrace_ops is registered to denote dynamically
+ *           allocated ftrace_ops which need special care
+ * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
+ *           could be controled by following calls:
+ *             ftrace_function_local_enable
+ *             ftrace_function_local_disable
+ * SAVE_REGS - The ftrace_ops wants regs saved at each function called
+ *            and passed to the callback. If this flag is set, but the
+ *            architecture does not support passing regs
+ *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
+ *            ftrace_ops will fail to register, unless the next flag
+ *            is set.
+ * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
+ *            handler can handle an arch that does not save regs
+ *            (the handler tests if regs == NULL), then it can set
+ *            this flag instead. It will not fail registering the ftrace_ops
+ *            but, the regs field will be NULL if the arch does not support
+ *            passing regs to the handler.
+ *            Note, if this flag is set, the SAVE_REGS flag will automatically
+ *            get set upon registering the ftrace_ops, if the arch supports it.
+ * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
+ *            that the call back has its own recursion protection. If it does
+ *            not set this, then the ftrace infrastructure will add recursion
+ *            protection for the caller.
+ * STUB   - The ftrace_ops is just a place holder.
+ * INITIALIZED - The ftrace_ops has already been initialized (first use time
+ *            register_ftrace_function() is called, it will initialized the ops)
+ * DELETED - The ops are being deleted, do not let them be registered again.
+ * ADDING  - The ops is in the process of being added.
+ * REMOVING - The ops is in the process of being removed.
+ * MODIFYING - The ops is in the process of changing its filter functions.
+ * ALLOC_TRAMP - A dynamic trampoline was allocated by the core code.
+ *            The arch specific code sets this flag when it allocated a
+ *            trampoline. This lets the arch know that it can update the
+ *            trampoline in case the callback function changes.
+ *            The ftrace_ops trampoline can be set by the ftrace users, and
+ *            in such cases the arch must not modify it. Only the arch ftrace
+ *            core code should set this flag.
+ * IPMODIFY - The ops can modify the IP register. This can only be set with
+ *            SAVE_REGS. If another ops with this flag set is already registered
+ *            for any of the functions that this ops will be registered for, then
+ *            this ops will fail to register or set_filter_ip.
+ */
+enum {
+	FTRACE_OPS_FL_ENABLED			= 1 << 0,
+	FTRACE_OPS_FL_DYNAMIC			= 1 << 1,
+	FTRACE_OPS_FL_CONTROL			= 1 << 2,
+	FTRACE_OPS_FL_SAVE_REGS			= 1 << 3,
+	FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED	= 1 << 4,
+	FTRACE_OPS_FL_RECURSION_SAFE		= 1 << 5,
+	FTRACE_OPS_FL_STUB			= 1 << 6,
+	FTRACE_OPS_FL_INITIALIZED		= 1 << 7,
+	FTRACE_OPS_FL_DELETED			= 1 << 8,
+	FTRACE_OPS_FL_ADDING			= 1 << 9,
+	FTRACE_OPS_FL_REMOVING			= 1 << 10,
+	FTRACE_OPS_FL_MODIFYING			= 1 << 11,
+	FTRACE_OPS_FL_ALLOC_TRAMP		= 1 << 12,
+	FTRACE_OPS_FL_IPMODIFY			= 1 << 13,
+};
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/* The hash used to know what functions callbacks trace */
+struct ftrace_ops_hash {
+	struct ftrace_hash		*notrace_hash;
+	struct ftrace_hash		*filter_hash;
+	struct mutex			regex_lock;
+};
+#endif
+
+/*
+ * Note, ftrace_ops can be referenced outside of RCU protection.
+ * (Although, for perf, the control ops prevent that). If ftrace_ops is
+ * allocated and not part of kernel core data, the unregistering of it will
+ * perform a scheduling on all CPUs to make sure that there are no more users.
+ * Depending on the load of the system that may take a bit of time.
+ *
+ * Any private data added must also take care not to be freed and if private
+ * data is added to a ftrace_ops that is in core code, the user of the
+ * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
+ */
+struct ftrace_ops {
+	ftrace_func_t			func;
+	struct ftrace_ops		*next;
+	unsigned long			flags;
+	void				*private;
+	int __percpu			*disabled;
+#ifdef CONFIG_DYNAMIC_FTRACE
+	int				nr_trampolines;
+	struct ftrace_ops_hash		local_hash;
+	struct ftrace_ops_hash		*func_hash;
+	struct ftrace_ops_hash		old_hash;
+	unsigned long			trampoline;
+	unsigned long			trampoline_size;
+#endif
+};
+
+/*
+ * Type of the current tracing.
+ */
+enum ftrace_tracing_type_t {
+	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
+	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
+};
+
+/* Current tracing type, default is FTRACE_TYPE_ENTER */
+extern enum ftrace_tracing_type_t ftrace_tracing_type;
+
+/*
+ * The ftrace_ops must be a static and should also
+ * be read_mostly.  These functions do modify read_mostly variables
+ * so use them sparely. Never free an ftrace_op or modify the
+ * next pointer after it has been registered. Even after unregistering
+ * it, the next pointer may still be used internally.
+ */
+int register_ftrace_function(struct ftrace_ops *ops);
+int unregister_ftrace_function(struct ftrace_ops *ops);
+void clear_ftrace_function(void);
+
+/**
+ * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
+ *
+ * This function enables tracing on current cpu by decreasing
+ * the per cpu control variable.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
+{
+	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
+		return;
+
+	(*this_cpu_ptr(ops->disabled))--;
+}
+
+/**
+ * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
+ *
+ * This function enables tracing on current cpu by decreasing
+ * the per cpu control variable.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
+{
+	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
+		return;
+
+	(*this_cpu_ptr(ops->disabled))++;
+}
+
+/**
+ * ftrace_function_local_disabled - returns ftrace_ops disabled value
+ *                                  on current cpu
+ *
+ * This function returns value of ftrace_ops::disabled on current cpu.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
+{
+	WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
+	return *this_cpu_ptr(ops->disabled);
+}
+
+extern void ftrace_stub(unsigned long a0, unsigned long a1,
+			struct ftrace_ops *op, struct pt_regs *regs);
+
+#else /* !CONFIG_FUNCTION_TRACER */
+/*
+ * (un)register_ftrace_function must be a macro since the ops parameter
+ * must not be evaluated.
+ */
+#define register_ftrace_function(ops) ({ 0; })
+#define unregister_ftrace_function(ops) ({ 0; })
+static inline int ftrace_nr_registered_ops(void)
+{
+	return 0;
+}
+static inline void clear_ftrace_function(void) { }
+static inline void ftrace_kill(void) { }
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_STACK_TRACER
+extern int stack_tracer_enabled;
+int
+stack_trace_sysctl(struct ctl_table *table, int write,
+		   void __user *buffer, size_t *lenp,
+		   loff_t *ppos);
+#endif
+
+struct ftrace_func_command {
+	struct list_head	list;
+	char			*name;
+	int			(*func)(struct ftrace_hash *hash,
+					char *func, char *cmd,
+					char *params, int enable);
+};
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+int ftrace_arch_code_modify_prepare(void);
+int ftrace_arch_code_modify_post_process(void);
+
+struct dyn_ftrace;
+
+void ftrace_bug(int err, struct dyn_ftrace *rec);
+
+struct seq_file;
+
+struct ftrace_probe_ops {
+	void			(*func)(unsigned long ip,
+					unsigned long parent_ip,
+					void **data);
+	int			(*init)(struct ftrace_probe_ops *ops,
+					unsigned long ip, void **data);
+	void			(*free)(struct ftrace_probe_ops *ops,
+					unsigned long ip, void **data);
+	int			(*print)(struct seq_file *m,
+					 unsigned long ip,
+					 struct ftrace_probe_ops *ops,
+					 void *data);
+};
+
+extern int
+register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
+			      void *data);
+extern void
+unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
+				void *data);
+extern void
+unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
+extern void unregister_ftrace_function_probe_all(char *glob);
+
+extern int ftrace_text_reserved(const void *start, const void *end);
+
+extern int ftrace_nr_registered_ops(void);
+
+bool is_ftrace_trampoline(unsigned long addr);
+
+/*
+ * The dyn_ftrace record's flags field is split into two parts.
+ * the first part which is '0-FTRACE_REF_MAX' is a counter of
+ * the number of callbacks that have registered the function that
+ * the dyn_ftrace descriptor represents.
+ *
+ * The second part is a mask:
+ *  ENABLED - the function is being traced
+ *  REGS    - the record wants the function to save regs
+ *  REGS_EN - the function is set up to save regs.
+ *  IPMODIFY - the record allows for the IP address to be changed.
+ *
+ * When a new ftrace_ops is registered and wants a function to save
+ * pt_regs, the rec->flag REGS is set. When the function has been
+ * set up to save regs, the REG_EN flag is set. Once a function
+ * starts saving regs it will do so until all ftrace_ops are removed
+ * from tracing that function.
+ */
+enum {
+	FTRACE_FL_ENABLED	= (1UL << 31),
+	FTRACE_FL_REGS		= (1UL << 30),
+	FTRACE_FL_REGS_EN	= (1UL << 29),
+	FTRACE_FL_TRAMP		= (1UL << 28),
+	FTRACE_FL_TRAMP_EN	= (1UL << 27),
+	FTRACE_FL_IPMODIFY	= (1UL << 26),
+};
+
+#define FTRACE_REF_MAX_SHIFT	26
+#define FTRACE_FL_BITS		6
+#define FTRACE_FL_MASKED_BITS	((1UL << FTRACE_FL_BITS) - 1)
+#define FTRACE_FL_MASK		(FTRACE_FL_MASKED_BITS << FTRACE_REF_MAX_SHIFT)
+#define FTRACE_REF_MAX		((1UL << FTRACE_REF_MAX_SHIFT) - 1)
+
+#define ftrace_rec_count(rec)	((rec)->flags & ~FTRACE_FL_MASK)
+
+struct dyn_ftrace {
+	unsigned long		ip; /* address of mcount call-site */
+	unsigned long		flags;
+	struct dyn_arch_ftrace	arch;
+};
+
+int ftrace_force_update(void);
+int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
+			 int remove, int reset);
+int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+		       int len, int reset);
+int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+			int len, int reset);
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
+void ftrace_free_filter(struct ftrace_ops *ops);
+
+int register_ftrace_command(struct ftrace_func_command *cmd);
+int unregister_ftrace_command(struct ftrace_func_command *cmd);
+
+enum {
+	FTRACE_UPDATE_CALLS		= (1 << 0),
+	FTRACE_DISABLE_CALLS		= (1 << 1),
+	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
+	FTRACE_START_FUNC_RET		= (1 << 3),
+	FTRACE_STOP_FUNC_RET		= (1 << 4),
+};
+
+/*
+ * The FTRACE_UPDATE_* enum is used to pass information back
+ * from the ftrace_update_record() and ftrace_test_record()
+ * functions. These are called by the code update routines
+ * to find out what is to be done for a given function.
+ *
+ *  IGNORE           - The function is already what we want it to be
+ *  MAKE_CALL        - Start tracing the function
+ *  MODIFY_CALL      - Stop saving regs for the function
+ *  MAKE_NOP         - Stop tracing the function
+ */
+enum {
+	FTRACE_UPDATE_IGNORE,
+	FTRACE_UPDATE_MAKE_CALL,
+	FTRACE_UPDATE_MODIFY_CALL,
+	FTRACE_UPDATE_MAKE_NOP,
+};
+
+enum {
+	FTRACE_ITER_FILTER	= (1 << 0),
+	FTRACE_ITER_NOTRACE	= (1 << 1),
+	FTRACE_ITER_PRINTALL	= (1 << 2),
+	FTRACE_ITER_DO_HASH	= (1 << 3),
+	FTRACE_ITER_HASH	= (1 << 4),
+	FTRACE_ITER_ENABLED	= (1 << 5),
+};
+
+void arch_ftrace_update_code(int command);
+
+struct ftrace_rec_iter;
+
+struct ftrace_rec_iter *ftrace_rec_iter_start(void);
+struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
+struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
+
+#define for_ftrace_rec_iter(iter)		\
+	for (iter = ftrace_rec_iter_start();	\
+	     iter;				\
+	     iter = ftrace_rec_iter_next(iter))
+
+
+int ftrace_update_record(struct dyn_ftrace *rec, int enable);
+int ftrace_test_record(struct dyn_ftrace *rec, int enable);
+void ftrace_run_stop_machine(int command);
+unsigned long ftrace_location(unsigned long ip);
+unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
+unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);
+
+extern ftrace_func_t ftrace_trace_function;
+
+int ftrace_regex_open(struct ftrace_ops *ops, int flag,
+		  struct inode *inode, struct file *file);
+ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
+			    size_t cnt, loff_t *ppos);
+ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
+			     size_t cnt, loff_t *ppos);
+int ftrace_regex_release(struct inode *inode, struct file *file);
+
+void __init
+ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
+
+/* defined in arch */
+extern int ftrace_ip_converted(unsigned long ip);
+extern int ftrace_dyn_arch_init(void);
+extern void ftrace_replace_code(int enable);
+extern int ftrace_update_ftrace_func(ftrace_func_t func);
+extern void ftrace_caller(void);
+extern void ftrace_regs_caller(void);
+extern void ftrace_call(void);
+extern void ftrace_regs_call(void);
+extern void mcount_call(void);
+
+void ftrace_modify_all_code(int command);
+
+#ifndef FTRACE_ADDR
+#define FTRACE_ADDR ((unsigned long)ftrace_caller)
+#endif
+
+#ifndef FTRACE_GRAPH_ADDR
+#define FTRACE_GRAPH_ADDR ((unsigned long)ftrace_graph_caller)
+#endif
+
+#ifndef FTRACE_REGS_ADDR
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
+#else
+# define FTRACE_REGS_ADDR FTRACE_ADDR
+#endif
+#endif
+
+/*
+ * If an arch would like functions that are only traced
+ * by the function graph tracer to jump directly to its own
+ * trampoline, then they can define FTRACE_GRAPH_TRAMP_ADDR
+ * to be that address to jump to.
+ */
+#ifndef FTRACE_GRAPH_TRAMP_ADDR
+#define FTRACE_GRAPH_TRAMP_ADDR ((unsigned long) 0)
+#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+extern void ftrace_graph_caller(void);
+extern int ftrace_enable_ftrace_graph_caller(void);
+extern int ftrace_disable_ftrace_graph_caller(void);
+#else
+static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
+static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
+#endif
+
+/**
+ * ftrace_make_nop - convert code into nop
+ * @mod: module structure if called by module load initialization
+ * @rec: the mcount call site record
+ * @addr: the address that the call site should be calling
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch.  The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a caller to @addr
+ *
+ * Return must be:
+ *  0 on success
+ *  -EFAULT on error reading the location
+ *  -EINVAL on a failed compare of the contents
+ *  -EPERM  on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_make_nop(struct module *mod,
+			   struct dyn_ftrace *rec, unsigned long addr);
+
+/**
+ * ftrace_make_call - convert a nop call site into a call to addr
+ * @rec: the mcount call site record
+ * @addr: the address that the call site should call
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch.  The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a nop
+ *
+ * Return must be:
+ *  0 on success
+ *  -EFAULT on error reading the location
+ *  -EINVAL on a failed compare of the contents
+ *  -EPERM  on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+/**
+ * ftrace_modify_call - convert from one addr to another (no nop)
+ * @rec: the mcount call site record
+ * @old_addr: the address expected to be currently called to
+ * @addr: the address to change to
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch.  The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a caller to @old_addr
+ *
+ * Return must be:
+ *  0 on success
+ *  -EFAULT on error reading the location
+ *  -EINVAL on a failed compare of the contents
+ *  -EPERM  on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+			      unsigned long addr);
+#else
+/* Should never be called */
+static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+				     unsigned long addr)
+{
+	return -EINVAL;
+}
+#endif
+
+/* May be defined in arch */
+extern int ftrace_arch_read_dyn_info(char *buf, int size);
+
+extern int skip_trace(unsigned long ip);
+extern void ftrace_module_init(struct module *mod);
+
+extern void ftrace_disable_daemon(void);
+extern void ftrace_enable_daemon(void);
+#else /* CONFIG_DYNAMIC_FTRACE */
+static inline int skip_trace(unsigned long ip) { return 0; }
+static inline int ftrace_force_update(void) { return 0; }
+static inline void ftrace_disable_daemon(void) { }
+static inline void ftrace_enable_daemon(void) { }
+static inline void ftrace_release_mod(struct module *mod) {}
+static inline void ftrace_module_init(struct module *mod) {}
+static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
+{
+	return -EINVAL;
+}
+static inline __init int unregister_ftrace_command(char *cmd_name)
+{
+	return -EINVAL;
+}
+static inline int ftrace_text_reserved(const void *start, const void *end)
+{
+	return 0;
+}
+static inline unsigned long ftrace_location(unsigned long ip)
+{
+	return 0;
+}
+
+/*
+ * Again users of functions that have ftrace_ops may not
+ * have them defined when ftrace is not enabled, but these
+ * functions may still be called. Use a macro instead of inline.
+ */
+#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
+#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
+#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
+#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
+#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
+#define ftrace_free_filter(ops) do { } while (0)
+
+static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
+			    size_t cnt, loff_t *ppos) { return -ENODEV; }
+static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
+			     size_t cnt, loff_t *ppos) { return -ENODEV; }
+static inline int
+ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
+
+static inline bool is_ftrace_trampoline(unsigned long addr)
+{
+	return false;
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/* totally disable ftrace - can not re-enable after this */
+void ftrace_kill(void);
+
+static inline void tracer_disable(void)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	ftrace_enabled = 0;
+#endif
+}
+
+/*
+ * Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore.
+ */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	int saved_ftrace_enabled = ftrace_enabled;
+	ftrace_enabled = 0;
+	return saved_ftrace_enabled;
+#else
+	return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	ftrace_enabled = enabled;
+#endif
+}
+
+/* All archs should have this, but we define it for consistency */
+#ifndef ftrace_return_address0
+# define ftrace_return_address0 __builtin_return_address(0)
+#endif
+
+/* Archs may use other ways for ADDR1 and beyond */
+#ifndef ftrace_return_address
+# ifdef CONFIG_FRAME_POINTER
+#  define ftrace_return_address(n) __builtin_return_address(n)
+# else
+#  define ftrace_return_address(n) 0UL
+# endif
+#endif
+
+#define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
+#define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
+#define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
+#define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
+#define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
+#define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
+#define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
+
+#ifdef CONFIG_IRQSOFF_TRACER
+  extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
+  extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
+#else
+  static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
+  static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
+#endif
+
+#ifdef CONFIG_PREEMPT_TRACER
+  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
+  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
+#else
+/*
+ * Use defines instead of static inlines because some arches will make code out
+ * of the CALLER_ADDR, when we really want these to be a real nop.
+ */
+# define trace_preempt_on(a0, a1) do { } while (0)
+# define trace_preempt_off(a0, a1) do { } while (0)
+#endif
+
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+extern void ftrace_init(void);
+#else
+static inline void ftrace_init(void) { }
+#endif
+
+/*
+ * Structure that defines an entry function trace.
+ */
+struct ftrace_graph_ent {
+	unsigned long func; /* Current function */
+	int depth;
+};
+
+/*
+ * Structure that defines a return function trace.
+ */
+struct ftrace_graph_ret {
+	unsigned long func; /* Current function */
+	unsigned long long calltime;
+	unsigned long long rettime;
+	/* Number of functions that overran the depth limit for current task */
+	unsigned long overrun;
+	int depth;
+};
+
+/* Type of the callback handlers for tracing function graph*/
+typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
+typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/* for init task */
+#define INIT_FTRACE_GRAPH		.ret_stack = NULL,
+
+/*
+ * Stack of return addresses for functions
+ * of a thread.
+ * Used in struct thread_info
+ */
+struct ftrace_ret_stack {
+	unsigned long ret;
+	unsigned long func;
+	unsigned long long calltime;
+	unsigned long long subtime;
+	unsigned long fp;
+};
+
+/*
+ * Primary handler of a function return.
+ * It relays on ftrace_return_to_handler.
+ * Defined in entry_32/64.S
+ */
+extern void return_to_handler(void);
+
+extern int
+ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
+			 unsigned long frame_pointer);
+
+/*
+ * Sometimes we don't want to trace a function with the function
+ * graph tracer but we want them to keep traced by the usual function
+ * tracer if the function graph tracer is not configured.
+ */
+#define __notrace_funcgraph		notrace
+
+/*
+ * We want to which function is an entrypoint of a hardirq.
+ * That will help us to put a signal on output.
+ */
+#define __irq_entry		 __attribute__((__section__(".irqentry.text")))
+
+/* Limits of hardirq entrypoints */
+extern char __irqentry_text_start[];
+extern char __irqentry_text_end[];
+
+#define FTRACE_NOTRACE_DEPTH 65536
+#define FTRACE_RETFUNC_DEPTH 50
+#define FTRACE_RETSTACK_ALLOC_SIZE 32
+extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+				trace_func_graph_ent_t entryfunc);
+
+extern bool ftrace_graph_is_dead(void);
+extern void ftrace_graph_stop(void);
+
+/* The current handlers in use */
+extern trace_func_graph_ret_t ftrace_graph_return;
+extern trace_func_graph_ent_t ftrace_graph_entry;
+
+extern void unregister_ftrace_graph(void);
+
+extern void ftrace_graph_init_task(struct task_struct *t);
+extern void ftrace_graph_exit_task(struct task_struct *t);
+extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
+
+static inline int task_curr_ret_stack(struct task_struct *t)
+{
+	return t->curr_ret_stack;
+}
+
+static inline void pause_graph_tracing(void)
+{
+	atomic_inc(&current->tracing_graph_pause);
+}
+
+static inline void unpause_graph_tracing(void)
+{
+	atomic_dec(&current->tracing_graph_pause);
+}
+#else /* !CONFIG_FUNCTION_GRAPH_TRACER */
+
+#define __notrace_funcgraph
+#define __irq_entry
+#define INIT_FTRACE_GRAPH
+
+static inline void ftrace_graph_init_task(struct task_struct *t) { }
+static inline void ftrace_graph_exit_task(struct task_struct *t) { }
+static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
+
+static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+			  trace_func_graph_ent_t entryfunc)
+{
+	return -1;
+}
+static inline void unregister_ftrace_graph(void) { }
+
+static inline int task_curr_ret_stack(struct task_struct *tsk)
+{
+	return -1;
+}
+
+static inline void pause_graph_tracing(void) { }
+static inline void unpause_graph_tracing(void) { }
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_TRACING
+
+/* flags for current->trace */
+enum {
+	TSK_TRACE_FL_TRACE_BIT	= 0,
+	TSK_TRACE_FL_GRAPH_BIT	= 1,
+};
+enum {
+	TSK_TRACE_FL_TRACE	= 1 << TSK_TRACE_FL_TRACE_BIT,
+	TSK_TRACE_FL_GRAPH	= 1 << TSK_TRACE_FL_GRAPH_BIT,
+};
+
+static inline void set_tsk_trace_trace(struct task_struct *tsk)
+{
+	set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
+}
+
+static inline void clear_tsk_trace_trace(struct task_struct *tsk)
+{
+	clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
+}
+
+static inline int test_tsk_trace_trace(struct task_struct *tsk)
+{
+	return tsk->trace & TSK_TRACE_FL_TRACE;
+}
+
+static inline void set_tsk_trace_graph(struct task_struct *tsk)
+{
+	set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
+}
+
+static inline void clear_tsk_trace_graph(struct task_struct *tsk)
+{
+	clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
+}
+
+static inline int test_tsk_trace_graph(struct task_struct *tsk)
+{
+	return tsk->trace & TSK_TRACE_FL_GRAPH;
+}
+
+enum ftrace_dump_mode;
+
+extern enum ftrace_dump_mode ftrace_dump_on_oops;
+extern int tracepoint_printk;
+
+extern void disable_trace_on_warning(void);
+extern int __disable_trace_on_warning;
+
+#ifdef CONFIG_PREEMPT
+#define INIT_TRACE_RECURSION		.trace_recursion = 0,
+#endif
+
+#else /* CONFIG_TRACING */
+static inline void  disable_trace_on_warning(void) { }
+#endif /* CONFIG_TRACING */
+
+#ifndef INIT_TRACE_RECURSION
+#define INIT_TRACE_RECURSION
+#endif
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+unsigned long arch_syscall_addr(int nr);
+
+#endif /* CONFIG_FTRACE_SYSCALLS */
+
+#endif /* _LINUX_FTRACE_H */