Initial import

2 files changed, 323 insertions, 0 deletions

diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h
new file mode 100644
index 000000000..12ce3ee42
--- /dev/null
+++ b/include/linux/iio/frequency/ad9523.h
@@ -0,0 +1,195 @@
+/*
+ * AD9523 SPI Low Jitter Clock Generator
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_FREQUENCY_AD9523_H_
+#define IIO_FREQUENCY_AD9523_H_
+
+enum outp_drv_mode {
+	TRISTATE,
+	LVPECL_8mA,
+	LVDS_4mA,
+	LVDS_7mA,
+	HSTL0_16mA,
+	HSTL1_8mA,
+	CMOS_CONF1,
+	CMOS_CONF2,
+	CMOS_CONF3,
+	CMOS_CONF4,
+	CMOS_CONF5,
+	CMOS_CONF6,
+	CMOS_CONF7,
+	CMOS_CONF8,
+	CMOS_CONF9
+};
+
+enum ref_sel_mode {
+	NONEREVERTIVE_STAY_ON_REFB,
+	REVERT_TO_REFA,
+	SELECT_REFA,
+	SELECT_REFB,
+	EXT_REF_SEL
+};
+
+/**
+ * struct ad9523_channel_spec - Output channel configuration
+ *
+ * @channel_num: Output channel number.
+ * @divider_output_invert_en: Invert the polarity of the output clock.
+ * @sync_ignore_en: Ignore chip-level SYNC signal.
+ * @low_power_mode_en: Reduce power used in the differential output modes.
+ * @use_alt_clock_src: Channel divider uses alternative clk source.
+ * @output_dis: Disables, powers down the entire channel.
+ * @driver_mode: Output driver mode (logic level family).
+ * @divider_phase: Divider initial phase after a SYNC. Range 0..63
+		   LSB = 1/2 of a period of the divider input clock.
+ * @channel_divider: 10-bit channel divider.
+ * @extended_name: Optional descriptive channel name.
+ */
+
+struct ad9523_channel_spec {
+	unsigned		channel_num;
+	bool			divider_output_invert_en;
+	bool			sync_ignore_en;
+	bool			low_power_mode_en;
+				 /* CH0..CH3 VCXO, CH4..CH9 VCO2 */
+	bool			use_alt_clock_src;
+	bool			output_dis;
+	enum outp_drv_mode	driver_mode;
+	unsigned char		divider_phase;
+	unsigned short		channel_divider;
+	char			extended_name[16];
+};
+
+enum pll1_rzero_resistor {
+	RZERO_883_OHM,
+	RZERO_677_OHM,
+	RZERO_341_OHM,
+	RZERO_135_OHM,
+	RZERO_10_OHM,
+	RZERO_USE_EXT_RES = 8,
+};
+
+enum rpole2_resistor {
+	RPOLE2_900_OHM,
+	RPOLE2_450_OHM,
+	RPOLE2_300_OHM,
+	RPOLE2_225_OHM,
+};
+
+enum rzero_resistor {
+	RZERO_3250_OHM,
+	RZERO_2750_OHM,
+	RZERO_2250_OHM,
+	RZERO_2100_OHM,
+	RZERO_3000_OHM,
+	RZERO_2500_OHM,
+	RZERO_2000_OHM,
+	RZERO_1850_OHM,
+};
+
+enum cpole1_capacitor {
+	CPOLE1_0_PF,
+	CPOLE1_8_PF,
+	CPOLE1_16_PF,
+	CPOLE1_24_PF,
+	_CPOLE1_24_PF, /* place holder */
+	CPOLE1_32_PF,
+	CPOLE1_40_PF,
+	CPOLE1_48_PF,
+};
+
+/**
+ * struct ad9523_platform_data - platform specific information
+ *
+ * @vcxo_freq: External VCXO frequency in Hz
+ * @refa_diff_rcv_en: REFA differential/single-ended input selection.
+ * @refb_diff_rcv_en: REFB differential/single-ended input selection.
+ * @zd_in_diff_en: Zero Delay differential/single-ended input selection.
+ * @osc_in_diff_en: OSC differential/ single-ended input selection.
+ * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable.
+ * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable.
+ * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable.
+ * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable.
+ * @refa_r_div: PLL1 10-bit REFA R divider.
+ * @refb_r_div: PLL1 10-bit REFB R divider.
+ * @pll1_feedback_div: PLL1 10-bit Feedback N divider.
+ * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA).
+ * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection.
+ * @osc_in_feedback_en: PLL1 feedback path, local feedback from
+ *			the OSC_IN receiver or zero delay mode
+ * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection.
+ * @ref_mode: Reference selection mode.
+ * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA).
+ * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4.
+ * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63.
+ * @pll2_freq_doubler_en: PLL2 frequency doubler enable.
+ * @pll2_r2_div: PLL2 R2 divider, range 0..31.
+ * @pll2_vco_diff_m1: VCO1 divider, range 3..5.
+ * @pll2_vco_diff_m2: VCO2 divider, range 3..5.
+ * @rpole2: PLL2 loop filter Rpole resistor value.
+ * @rzero: PLL2 loop filter Rzero resistor value.
+ * @cpole1: PLL2 loop filter Cpole capacitor value.
+ * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable.
+ * @num_channels: Array size of struct ad9523_channel_spec.
+ * @channels: Pointer to channel array.
+ * @name: Optional alternative iio device name.
+ */
+
+struct ad9523_platform_data {
+	unsigned long vcxo_freq;
+
+	/* Differential/ Single-Ended Input Configuration */
+	bool				refa_diff_rcv_en;
+	bool				refb_diff_rcv_en;
+	bool				zd_in_diff_en;
+	bool				osc_in_diff_en;
+
+	/*
+	 * Valid if differential input disabled
+	 * if false defaults to pos input
+	 */
+	bool				refa_cmos_neg_inp_en;
+	bool				refb_cmos_neg_inp_en;
+	bool				zd_in_cmos_neg_inp_en;
+	bool				osc_in_cmos_neg_inp_en;
+
+	/* PLL1 Setting */
+	unsigned short			refa_r_div;
+	unsigned short			refb_r_div;
+	unsigned short			pll1_feedback_div;
+	unsigned short			pll1_charge_pump_current_nA;
+	bool				zero_delay_mode_internal_en;
+	bool				osc_in_feedback_en;
+	enum pll1_rzero_resistor	pll1_loop_filter_rzero;
+
+	/* Reference */
+	enum ref_sel_mode		ref_mode;
+
+	/* PLL2 Setting */
+	unsigned int			pll2_charge_pump_current_nA;
+	unsigned char			pll2_ndiv_a_cnt;
+	unsigned char			pll2_ndiv_b_cnt;
+	bool				pll2_freq_doubler_en;
+	unsigned char			pll2_r2_div;
+	unsigned char			pll2_vco_diff_m1; /* 3..5 */
+	unsigned char			pll2_vco_diff_m2; /* 3..5 */
+
+	/* Loop Filter PLL2 */
+	enum rpole2_resistor		rpole2;
+	enum rzero_resistor		rzero;
+	enum cpole1_capacitor		cpole1;
+	bool				rzero_bypass_en;
+
+	/* Output Channel Configuration */
+	int				num_channels;
+	struct ad9523_channel_spec	*channels;
+
+	char				name[SPI_NAME_SIZE];
+};
+
+#endif /* IIO_FREQUENCY_AD9523_H_ */
diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h
new file mode 100644
index 000000000..ffd8c8f90
--- /dev/null
+++ b/include/linux/iio/frequency/adf4350.h
@@ -0,0 +1,128 @@
+/*
+ * ADF4350/ADF4351 SPI PLL driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_PLL_ADF4350_H_
+#define IIO_PLL_ADF4350_H_
+
+/* Registers */
+#define ADF4350_REG0	0
+#define ADF4350_REG1	1
+#define ADF4350_REG2	2
+#define ADF4350_REG3	3
+#define ADF4350_REG4	4
+#define ADF4350_REG5	5
+
+/* REG0 Bit Definitions */
+#define ADF4350_REG0_FRACT(x)			(((x) & 0xFFF) << 3)
+#define ADF4350_REG0_INT(x)			(((x) & 0xFFFF) << 15)
+
+/* REG1 Bit Definitions */
+#define ADF4350_REG1_MOD(x)			(((x) & 0xFFF) << 3)
+#define ADF4350_REG1_PHASE(x)			(((x) & 0xFFF) << 15)
+#define ADF4350_REG1_PRESCALER			(1 << 27)
+
+/* REG2 Bit Definitions */
+#define ADF4350_REG2_COUNTER_RESET_EN		(1 << 3)
+#define ADF4350_REG2_CP_THREESTATE_EN		(1 << 4)
+#define ADF4350_REG2_POWER_DOWN_EN		(1 << 5)
+#define ADF4350_REG2_PD_POLARITY_POS		(1 << 6)
+#define ADF4350_REG2_LDP_6ns			(1 << 7)
+#define ADF4350_REG2_LDP_10ns			(0 << 7)
+#define ADF4350_REG2_LDF_FRACT_N		(0 << 8)
+#define ADF4350_REG2_LDF_INT_N			(1 << 8)
+#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x)	(((((x)-312) / 312) & 0xF) << 9)
+#define ADF4350_REG2_DOUBLE_BUFF_EN		(1 << 13)
+#define ADF4350_REG2_10BIT_R_CNT(x)		((x) << 14)
+#define ADF4350_REG2_RDIV2_EN			(1 << 24)
+#define ADF4350_REG2_RMULT2_EN			(1 << 25)
+#define ADF4350_REG2_MUXOUT(x)			((x) << 26)
+#define ADF4350_REG2_NOISE_MODE(x)		(((unsigned)(x)) << 29)
+#define ADF4350_MUXOUT_THREESTATE		0
+#define ADF4350_MUXOUT_DVDD			1
+#define ADF4350_MUXOUT_GND			2
+#define ADF4350_MUXOUT_R_DIV_OUT		3
+#define ADF4350_MUXOUT_N_DIV_OUT		4
+#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT	5
+#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT	6
+
+/* REG3 Bit Definitions */
+#define ADF4350_REG3_12BIT_CLKDIV(x)		((x) << 3)
+#define ADF4350_REG3_12BIT_CLKDIV_MODE(x)	((x) << 16)
+#define ADF4350_REG3_12BIT_CSR_EN		(1 << 18)
+#define ADF4351_REG3_CHARGE_CANCELLATION_EN	(1 << 21)
+#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN	(1 << 22)
+#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH	(1 << 23)
+
+/* REG4 Bit Definitions */
+#define ADF4350_REG4_OUTPUT_PWR(x)		((x) << 3)
+#define ADF4350_REG4_RF_OUT_EN			(1 << 5)
+#define ADF4350_REG4_AUX_OUTPUT_PWR(x)		((x) << 6)
+#define ADF4350_REG4_AUX_OUTPUT_EN		(1 << 8)
+#define ADF4350_REG4_AUX_OUTPUT_FUND		(1 << 9)
+#define ADF4350_REG4_AUX_OUTPUT_DIV		(0 << 9)
+#define ADF4350_REG4_MUTE_TILL_LOCK_EN		(1 << 10)
+#define ADF4350_REG4_VCO_PWRDOWN_EN		(1 << 11)
+#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x)	((x) << 12)
+#define ADF4350_REG4_RF_DIV_SEL(x)		((x) << 20)
+#define ADF4350_REG4_FEEDBACK_DIVIDED		(0 << 23)
+#define ADF4350_REG4_FEEDBACK_FUND		(1 << 23)
+
+/* REG5 Bit Definitions */
+#define ADF4350_REG5_LD_PIN_MODE_LOW		(0 << 22)
+#define ADF4350_REG5_LD_PIN_MODE_DIGITAL	(1 << 22)
+#define ADF4350_REG5_LD_PIN_MODE_HIGH		(3 << 22)
+
+/* Specifications */
+#define ADF4350_MAX_OUT_FREQ		4400000000ULL /* Hz */
+#define ADF4350_MIN_OUT_FREQ		137500000 /* Hz */
+#define ADF4351_MIN_OUT_FREQ		34375000 /* Hz */
+#define ADF4350_MIN_VCO_FREQ		2200000000ULL /* Hz */
+#define ADF4350_MAX_FREQ_45_PRESC	3000000000ULL /* Hz */
+#define ADF4350_MAX_FREQ_PFD		32000000 /* Hz */
+#define ADF4350_MAX_BANDSEL_CLK		125000 /* Hz */
+#define ADF4350_MAX_FREQ_REFIN		250000000 /* Hz */
+#define ADF4350_MAX_MODULUS		4095
+#define ADF4350_MAX_R_CNT		1023
+
+
+/**
+ * struct adf4350_platform_data - platform specific information
+ * @name:		Optional device name.
+ * @clkin:		REFin frequency in Hz.
+ * @channel_spacing:	Channel spacing in Hz (influences MODULUS).
+ * @power_up_frequency:	Optional, If set in Hz the PLL tunes to the desired
+ *			frequency on probe.
+ * @ref_div_factor:	Optional, if set the driver skips dynamic calculation
+ *			and uses this default value instead.
+ * @ref_doubler_en:	Enables reference doubler.
+ * @ref_div2_en:	Enables reference divider.
+ * @r2_user_settings:	User defined settings for ADF4350/1 REGISTER_2.
+ * @r3_user_settings:	User defined settings for ADF4350/1 REGISTER_3.
+ * @r4_user_settings:	User defined settings for ADF4350/1 REGISTER_4.
+ * @gpio_lock_detect:	Optional, if set with a valid GPIO number,
+ *			pll lock state is tested upon read.
+ *			If not used - set to -1.
+ */
+
+struct adf4350_platform_data {
+	char			name[32];
+	unsigned long		clkin;
+	unsigned long		channel_spacing;
+	unsigned long long	power_up_frequency;
+
+	unsigned short		ref_div_factor; /* 10-bit R counter */
+	bool			ref_doubler_en;
+	bool			ref_div2_en;
+
+	unsigned		r2_user_settings;
+	unsigned		r3_user_settings;
+	unsigned		r4_user_settings;
+	int			gpio_lock_detect;
+};
+
+#endif /* IIO_PLL_ADF4350_H_ */