Initial import

27 files changed, 3038 insertions, 0 deletions

diff --git a/include/linux/iio/accel/kxcjk_1013.h b/include/linux/iio/accel/kxcjk_1013.h
new file mode 100644
index 000000000..fd1d540ea
--- /dev/null
+++ b/include/linux/iio/accel/kxcjk_1013.h
@@ -0,0 +1,22 @@
+/*
+ * KXCJK-1013 3-axis accelerometer Interface
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __IIO_KXCJK_1013_H__
+#define __IIO_KXCJK_1013_H__
+
+struct kxcjk_1013_platform_data {
+	bool active_high_intr;
+};
+
+#endif
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
new file mode 100644
index 000000000..e7fdec4db
--- /dev/null
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -0,0 +1,173 @@
+/*
+ * Support code for Analog Devices Sigma-Delta ADCs
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __AD_SIGMA_DELTA_H__
+#define __AD_SIGMA_DELTA_H__
+
+enum ad_sigma_delta_mode {
+	AD_SD_MODE_CONTINUOUS = 0,
+	AD_SD_MODE_SINGLE = 1,
+	AD_SD_MODE_IDLE = 2,
+	AD_SD_MODE_POWERDOWN = 3,
+};
+
+/**
+ * struct ad_sigma_delta_calib_data - Calibration data for Sigma Delta devices
+ * @mode: Calibration mode.
+ * @channel: Calibration channel.
+ */
+struct ad_sd_calib_data {
+	unsigned int mode;
+	unsigned int channel;
+};
+
+struct ad_sigma_delta;
+struct iio_dev;
+
+/**
+ * struct ad_sigma_delta_info - Sigma Delta driver specific callbacks and options
+ * @set_channel: Will be called to select the current channel, may be NULL.
+ * @set_mode: Will be called to select the current mode, may be NULL.
+ * @postprocess_sample: Is called for each sampled data word, can be used to
+ *		modify or drop the sample data, it, may be NULL.
+ * @has_registers: true if the device has writable and readable registers, false
+ *		if there is just one read-only sample data shift register.
+ * @addr_shift: Shift of the register address in the communications register.
+ * @read_mask: Mask for the communications register having the read bit set.
+ */
+struct ad_sigma_delta_info {
+	int (*set_channel)(struct ad_sigma_delta *, unsigned int channel);
+	int (*set_mode)(struct ad_sigma_delta *, enum ad_sigma_delta_mode mode);
+	int (*postprocess_sample)(struct ad_sigma_delta *, unsigned int raw_sample);
+	bool has_registers;
+	unsigned int addr_shift;
+	unsigned int read_mask;
+};
+
+/**
+ * struct ad_sigma_delta - Sigma Delta device struct
+ * @spi: The spi device associated with the Sigma Delta device.
+ * @trig: The IIO trigger associated with the Sigma Delta device.
+ *
+ * Most of the fields are private to the sigma delta library code and should not
+ * be accessed by individual drivers.
+ */
+struct ad_sigma_delta {
+	struct spi_device	*spi;
+	struct iio_trigger	*trig;
+
+/* private: */
+	struct completion	completion;
+	bool			irq_dis;
+
+	bool			bus_locked;
+
+	uint8_t			comm;
+
+	const struct ad_sigma_delta_info *info;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	uint8_t				data[4] ____cacheline_aligned;
+};
+
+static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd,
+	unsigned int channel)
+{
+	if (sd->info->set_channel)
+		return sd->info->set_channel(sd, channel);
+
+	return 0;
+}
+
+static inline int ad_sigma_delta_set_mode(struct ad_sigma_delta *sd,
+	unsigned int mode)
+{
+	if (sd->info->set_mode)
+		return sd->info->set_mode(sd, mode);
+
+	return 0;
+}
+
+static inline int ad_sigma_delta_postprocess_sample(struct ad_sigma_delta *sd,
+	unsigned int raw_sample)
+{
+	if (sd->info->postprocess_sample)
+		return sd->info->postprocess_sample(sd, raw_sample);
+
+	return 0;
+}
+
+void ad_sd_set_comm(struct ad_sigma_delta *sigma_delta, uint8_t comm);
+int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg,
+	unsigned int size, unsigned int val);
+int ad_sd_read_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg,
+	unsigned int size, unsigned int *val);
+
+int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val);
+int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta,
+	const struct ad_sd_calib_data *cd, unsigned int n);
+int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
+	struct spi_device *spi, const struct ad_sigma_delta_info *info);
+
+int ad_sd_setup_buffer_and_trigger(struct iio_dev *indio_dev);
+void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev);
+
+int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig);
+
+#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift, _extend_name, _type) \
+	{ \
+		.type = (_type), \
+		.differential = (_channel2 == -1 ? 0 : 1), \
+		.indexed = 1, \
+		.channel = (_channel1), \
+		.channel2 = (_channel2), \
+		.address = (_address), \
+		.extend_name = (_extend_name), \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.scan_index = (_si), \
+		.scan_type = { \
+			.sign = 'u', \
+			.realbits = (_bits), \
+			.storagebits = (_storagebits), \
+			.shift = (_shift), \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+	_storagebits, _shift) \
+	__AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE)
+
+#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \
+		_storagebits, _shift, "shorted", IIO_VOLTAGE)
+
+#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \
+	_storagebits, _shift) \
+	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_VOLTAGE)
+
+#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \
+	__AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \
+		_storagebits, _shift, NULL, IIO_TEMP)
+
+#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \
+	_shift) \
+	__AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \
+		_storagebits, _shift, "supply", IIO_VOLTAGE)
+
+#endif
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
new file mode 100644
index 000000000..eb8622b78
--- /dev/null
+++ b/include/linux/iio/buffer.h
@@ -0,0 +1,180 @@
+/* The industrial I/O core - generic buffer interfaces.
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_BUFFER_GENERIC_H_
+#define _IIO_BUFFER_GENERIC_H_
+#include <linux/sysfs.h>
+#include <linux/iio/iio.h>
+#include <linux/kref.h>
+
+#ifdef CONFIG_IIO_BUFFER
+
+struct iio_buffer;
+
+/**
+ * struct iio_buffer_access_funcs - access functions for buffers.
+ * @store_to:		actually store stuff to the buffer
+ * @read_first_n:	try to get a specified number of bytes (must exist)
+ * @data_available:	indicates how much data is available for reading from
+ *			the buffer.
+ * @request_update:	if a parameter change has been marked, update underlying
+ *			storage.
+ * @set_bytes_per_datum:set number of bytes per datum
+ * @set_length:		set number of datums in buffer
+ * @release:		called when the last reference to the buffer is dropped,
+ *			should free all resources allocated by the buffer.
+ *
+ * The purpose of this structure is to make the buffer element
+ * modular as event for a given driver, different usecases may require
+ * different buffer designs (space efficiency vs speed for example).
+ *
+ * It is worth noting that a given buffer implementation may only support a
+ * small proportion of these functions.  The core code 'should' cope fine with
+ * any of them not existing.
+ **/
+struct iio_buffer_access_funcs {
+	int (*store_to)(struct iio_buffer *buffer, const void *data);
+	int (*read_first_n)(struct iio_buffer *buffer,
+			    size_t n,
+			    char __user *buf);
+	size_t (*data_available)(struct iio_buffer *buffer);
+
+	int (*request_update)(struct iio_buffer *buffer);
+
+	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
+	int (*set_length)(struct iio_buffer *buffer, int length);
+
+	void (*release)(struct iio_buffer *buffer);
+};
+
+/**
+ * struct iio_buffer - general buffer structure
+ * @length:		[DEVICE] number of datums in buffer
+ * @bytes_per_datum:	[DEVICE] size of individual datum including timestamp
+ * @scan_el_attrs:	[DRIVER] control of scan elements if that scan mode
+ *			control method is used
+ * @scan_mask:		[INTERN] bitmask used in masking scan mode elements
+ * @scan_timestamp:	[INTERN] does the scan mode include a timestamp
+ * @access:		[DRIVER] buffer access functions associated with the
+ *			implementation.
+ * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes.
+ * @scan_el_group:	[DRIVER] attribute group for those attributes not
+ *			created from the iio_chan_info array.
+ * @pollq:		[INTERN] wait queue to allow for polling on the buffer.
+ * @stufftoread:	[INTERN] flag to indicate new data.
+ * @demux_list:		[INTERN] list of operations required to demux the scan.
+ * @demux_bounce:	[INTERN] buffer for doing gather from incoming scan.
+ * @buffer_list:	[INTERN] entry in the devices list of current buffers.
+ * @ref:		[INTERN] reference count of the buffer.
+ * @watermark:		[INTERN] number of datums to wait for poll/read.
+ */
+struct iio_buffer {
+	int					length;
+	int					bytes_per_datum;
+	struct attribute_group			*scan_el_attrs;
+	long					*scan_mask;
+	bool					scan_timestamp;
+	const struct iio_buffer_access_funcs	*access;
+	struct list_head			scan_el_dev_attr_list;
+	struct attribute_group			buffer_group;
+	struct attribute_group			scan_el_group;
+	wait_queue_head_t			pollq;
+	bool					stufftoread;
+	const struct attribute			**attrs;
+	struct list_head			demux_list;
+	void					*demux_bounce;
+	struct list_head			buffer_list;
+	struct kref				ref;
+	unsigned int				watermark;
+};
+
+/**
+ * iio_update_buffers() - add or remove buffer from active list
+ * @indio_dev:		device to add buffer to
+ * @insert_buffer:	buffer to insert
+ * @remove_buffer:	buffer_to_remove
+ *
+ * Note this will tear down the all buffering and build it up again
+ */
+int iio_update_buffers(struct iio_dev *indio_dev,
+		       struct iio_buffer *insert_buffer,
+		       struct iio_buffer *remove_buffer);
+
+/**
+ * iio_buffer_init() - Initialize the buffer structure
+ * @buffer:		buffer to be initialized
+ **/
+void iio_buffer_init(struct iio_buffer *buffer);
+
+int iio_scan_mask_query(struct iio_dev *indio_dev,
+			struct iio_buffer *buffer, int bit);
+
+/**
+ * iio_push_to_buffers() - push to a registered buffer.
+ * @indio_dev:		iio_dev structure for device.
+ * @data:		Full scan.
+ */
+int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data);
+
+/*
+ * iio_push_to_buffers_with_timestamp() - push data and timestamp to buffers
+ * @indio_dev:		iio_dev structure for device.
+ * @data:		sample data
+ * @timestamp:		timestamp for the sample data
+ *
+ * Pushes data to the IIO device's buffers. If timestamps are enabled for the
+ * device the function will store the supplied timestamp as the last element in
+ * the sample data buffer before pushing it to the device buffers. The sample
+ * data buffer needs to be large enough to hold the additional timestamp
+ * (usually the buffer should be indio->scan_bytes bytes large).
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev,
+	void *data, int64_t timestamp)
+{
+	if (indio_dev->scan_timestamp) {
+		size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1;
+		((int64_t *)data)[ts_offset] = timestamp;
+	}
+
+	return iio_push_to_buffers(indio_dev, data);
+}
+
+int iio_update_demux(struct iio_dev *indio_dev);
+
+bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
+	const unsigned long *mask);
+
+struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer);
+void iio_buffer_put(struct iio_buffer *buffer);
+
+/**
+ * iio_device_attach_buffer - Attach a buffer to a IIO device
+ * @indio_dev: The device the buffer should be attached to
+ * @buffer: The buffer to attach to the device
+ *
+ * This function attaches a buffer to a IIO device. The buffer stays attached to
+ * the device until the device is freed. The function should only be called at
+ * most once per device.
+ */
+static inline void iio_device_attach_buffer(struct iio_dev *indio_dev,
+	struct iio_buffer *buffer)
+{
+	indio_dev->buffer = iio_buffer_get(buffer);
+}
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline void iio_buffer_get(struct iio_buffer *buffer) {}
+static inline void iio_buffer_put(struct iio_buffer *buffer) {}
+
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* _IIO_BUFFER_GENERIC_H_ */
diff --git a/include/linux/iio/common/ssp_sensors.h b/include/linux/iio/common/ssp_sensors.h
new file mode 100644
index 000000000..f4d1b0edb
--- /dev/null
+++ b/include/linux/iio/common/ssp_sensors.h
@@ -0,0 +1,82 @@
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+#ifndef _SSP_SENSORS_H_
+#define _SSP_SENSORS_H_
+
+#include <linux/iio/iio.h>
+
+#define SSP_TIME_SIZE				4
+#define SSP_ACCELEROMETER_SIZE			6
+#define SSP_GYROSCOPE_SIZE			6
+#define SSP_BIO_HRM_RAW_SIZE			8
+#define SSP_BIO_HRM_RAW_FAC_SIZE		36
+#define SSP_BIO_HRM_LIB_SIZE			8
+
+/**
+ * enum ssp_sensor_type - SSP sensor type
+ */
+enum ssp_sensor_type {
+	SSP_ACCELEROMETER_SENSOR = 0,
+	SSP_GYROSCOPE_SENSOR,
+	SSP_GEOMAGNETIC_UNCALIB_SENSOR,
+	SSP_GEOMAGNETIC_RAW,
+	SSP_GEOMAGNETIC_SENSOR,
+	SSP_PRESSURE_SENSOR,
+	SSP_GESTURE_SENSOR,
+	SSP_PROXIMITY_SENSOR,
+	SSP_TEMPERATURE_HUMIDITY_SENSOR,
+	SSP_LIGHT_SENSOR,
+	SSP_PROXIMITY_RAW,
+	SSP_ORIENTATION_SENSOR,
+	SSP_STEP_DETECTOR,
+	SSP_SIG_MOTION_SENSOR,
+	SSP_GYRO_UNCALIB_SENSOR,
+	SSP_GAME_ROTATION_VECTOR,
+	SSP_ROTATION_VECTOR,
+	SSP_STEP_COUNTER,
+	SSP_BIO_HRM_RAW,
+	SSP_BIO_HRM_RAW_FAC,
+	SSP_BIO_HRM_LIB,
+	SSP_SENSOR_MAX,
+};
+
+struct ssp_data;
+
+/**
+ * struct ssp_sensor_data - Sensor object
+ * @process_data:	Callback to feed sensor data.
+ * @type:		Used sensor type.
+ * @buffer:		Received data buffer.
+ */
+struct ssp_sensor_data {
+	int (*process_data)(struct iio_dev *indio_dev, void *buf,
+			    int64_t timestamp);
+	enum ssp_sensor_type type;
+	u8 *buffer;
+};
+
+void ssp_register_consumer(struct iio_dev *indio_dev,
+			   enum ssp_sensor_type type);
+
+int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type,
+		      u32 delay);
+
+int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type);
+
+u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type);
+
+int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type,
+		     u32 delay);
+#endif /* _SSP_SENSORS_H_ */
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
new file mode 100644
index 000000000..2c476acb8
--- /dev/null
+++ b/include/linux/iio/common/st_sensors.h
@@ -0,0 +1,290 @@
+/*
+ * STMicroelectronics sensors library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_H
+#define ST_SENSORS_H
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/irqreturn.h>
+#include <linux/iio/trigger.h>
+#include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
+
+#define ST_SENSORS_TX_MAX_LENGTH		2
+#define ST_SENSORS_RX_MAX_LENGTH		6
+
+#define ST_SENSORS_ODR_LIST_MAX			10
+#define ST_SENSORS_FULLSCALE_AVL_MAX		10
+
+#define ST_SENSORS_NUMBER_ALL_CHANNELS		4
+#define ST_SENSORS_ENABLE_ALL_AXIS		0x07
+#define ST_SENSORS_SCAN_X			0
+#define ST_SENSORS_SCAN_Y			1
+#define ST_SENSORS_SCAN_Z			2
+#define ST_SENSORS_DEFAULT_POWER_ON_VALUE	0x01
+#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE	0x00
+#define ST_SENSORS_DEFAULT_WAI_ADDRESS		0x0f
+#define ST_SENSORS_DEFAULT_AXIS_ADDR		0x20
+#define ST_SENSORS_DEFAULT_AXIS_MASK		0x07
+#define ST_SENSORS_DEFAULT_AXIS_N_BIT		3
+
+#define ST_SENSORS_MAX_NAME			17
+#define ST_SENSORS_MAX_4WAI			7
+
+#define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
+					ch2, s, endian, rbits, sbits, addr) \
+{ \
+	.type = device_type, \
+	.modified = mod, \
+	.info_mask_separate = mask, \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.scan_index = index, \
+	.channel2 = ch2, \
+	.address = addr, \
+	.scan_type = { \
+		.sign = s, \
+		.realbits = rbits, \
+		.shift = sbits - rbits, \
+		.storagebits = sbits, \
+		.endianness = endian, \
+	}, \
+}
+
+#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
+		IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
+			st_sensors_sysfs_sampling_frequency_avail)
+
+#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \
+		IIO_DEVICE_ATTR(name, S_IRUGO, \
+			st_sensors_sysfs_scale_avail, NULL , 0);
+
+struct st_sensor_odr_avl {
+	unsigned int hz;
+	u8 value;
+};
+
+struct st_sensor_odr {
+	u8 addr;
+	u8 mask;
+	struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
+};
+
+struct st_sensor_power {
+	u8 addr;
+	u8 mask;
+	u8 value_off;
+	u8 value_on;
+};
+
+struct st_sensor_axis {
+	u8 addr;
+	u8 mask;
+};
+
+struct st_sensor_fullscale_avl {
+	unsigned int num;
+	u8 value;
+	unsigned int gain;
+	unsigned int gain2;
+};
+
+struct st_sensor_fullscale {
+	u8 addr;
+	u8 mask;
+	struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
+};
+
+/**
+ * struct st_sensor_bdu - ST sensor device block data update
+ * @addr: address of the register.
+ * @mask: mask to write the block data update flag.
+ */
+struct st_sensor_bdu {
+	u8 addr;
+	u8 mask;
+};
+
+/**
+ * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
+ * @addr: address of the register.
+ * @mask_int1: mask to enable/disable IRQ on INT1 pin.
+ * @mask_int2: mask to enable/disable IRQ on INT2 pin.
+ * struct ig1 - represents the Interrupt Generator 1 of sensors.
+ * @en_addr: address of the enable ig1 register.
+ * @en_mask: mask to write the on/off value for enable.
+ */
+struct st_sensor_data_ready_irq {
+	u8 addr;
+	u8 mask_int1;
+	u8 mask_int2;
+	struct {
+		u8 en_addr;
+		u8 en_mask;
+	} ig1;
+};
+
+/**
+ * struct st_sensor_transfer_buffer - ST sensor device I/O buffer
+ * @buf_lock: Mutex to protect rx and tx buffers.
+ * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
+ *	This buffer is used to avoid DMA not-aligned issue.
+ * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
+ *	This buffer is used to avoid DMA not-aligned issue.
+ */
+struct st_sensor_transfer_buffer {
+	struct mutex buf_lock;
+	u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH];
+	u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned;
+};
+
+/**
+ * struct st_sensor_transfer_function - ST sensor device I/O function
+ * @read_byte: Function used to read one byte.
+ * @write_byte: Function used to write one byte.
+ * @read_multiple_byte: Function used to read multiple byte.
+ */
+struct st_sensor_transfer_function {
+	int (*read_byte) (struct st_sensor_transfer_buffer *tb,
+				struct device *dev, u8 reg_addr, u8 *res_byte);
+	int (*write_byte) (struct st_sensor_transfer_buffer *tb,
+				struct device *dev, u8 reg_addr, u8 data);
+	int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb,
+		struct device *dev, u8 reg_addr, int len, u8 *data,
+							bool multiread_bit);
+};
+
+/**
+ * struct st_sensor_settings - ST specific sensor settings
+ * @wai: Contents of WhoAmI register.
+ * @sensors_supported: List of supported sensors by struct itself.
+ * @ch: IIO channels for the sensor.
+ * @odr: Output data rate register and ODR list available.
+ * @pw: Power register of the sensor.
+ * @enable_axis: Enable one or more axis of the sensor.
+ * @fs: Full scale register and full scale list available.
+ * @bdu: Block data update register.
+ * @drdy_irq: Data ready register of the sensor.
+ * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
+ * @bootime: samples to discard when sensor passing from power-down to power-up.
+ */
+struct st_sensor_settings {
+	u8 wai;
+	char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
+	struct iio_chan_spec *ch;
+	int num_ch;
+	struct st_sensor_odr odr;
+	struct st_sensor_power pw;
+	struct st_sensor_axis enable_axis;
+	struct st_sensor_fullscale fs;
+	struct st_sensor_bdu bdu;
+	struct st_sensor_data_ready_irq drdy_irq;
+	bool multi_read_bit;
+	unsigned int bootime;
+};
+
+/**
+ * struct st_sensor_data - ST sensor device status
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @trig: The trigger in use by the core driver.
+ * @sensor_settings: Pointer to the specific sensor settings in use.
+ * @current_fullscale: Maximum range of measure by the sensor.
+ * @vdd: Pointer to sensor's Vdd power supply
+ * @vdd_io: Pointer to sensor's Vdd-IO power supply
+ * @enabled: Status of the sensor (false->off, true->on).
+ * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
+ * @buffer_data: Data used by buffer part.
+ * @odr: Output data rate of the sensor [Hz].
+ * num_data_channels: Number of data channels used in buffer.
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
+ * @tf: Transfer function structure used by I/O operations.
+ * @tb: Transfer buffers and mutex used by I/O operations.
+ */
+struct st_sensor_data {
+	struct device *dev;
+	struct iio_trigger *trig;
+	struct st_sensor_settings *sensor_settings;
+	struct st_sensor_fullscale_avl *current_fullscale;
+	struct regulator *vdd;
+	struct regulator *vdd_io;
+
+	bool enabled;
+	bool multiread_bit;
+
+	char *buffer_data;
+
+	unsigned int odr;
+	unsigned int num_data_channels;
+
+	u8 drdy_int_pin;
+
+	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
+
+	const struct st_sensor_transfer_function *tf;
+	struct st_sensor_transfer_buffer tb;
+};
+
+#ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+				const struct iio_trigger_ops *trigger_ops);
+
+void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
+
+#else
+static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+				const struct iio_trigger_ops *trigger_ops)
+{
+	return 0;
+}
+static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
+{
+	return;
+}
+#endif
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+					struct st_sensors_platform_data *pdata);
+
+int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
+
+void st_sensors_power_enable(struct iio_dev *indio_dev);
+
+void st_sensors_power_disable(struct iio_dev *indio_dev);
+
+int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
+
+int st_sensors_read_info_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *ch, int *val);
+
+int st_sensors_check_device_support(struct iio_dev *indio_dev,
+	int num_sensors_list, const struct st_sensor_settings *sensor_settings);
+
+ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
+				struct device_attribute *attr, char *buf);
+
+ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf);
+
+#endif /* ST_SENSORS_H */
diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h
new file mode 100644
index 000000000..1796af093
--- /dev/null
+++ b/include/linux/iio/common/st_sensors_i2c.h
@@ -0,0 +1,31 @@
+/*
+ * STMicroelectronics sensors i2c library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_I2C_H
+#define ST_SENSORS_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/iio/common/st_sensors.h>
+#include <linux/of.h>
+
+void st_sensors_i2c_configure(struct iio_dev *indio_dev,
+		struct i2c_client *client, struct st_sensor_data *sdata);
+
+#ifdef CONFIG_OF
+void st_sensors_of_i2c_probe(struct i2c_client *client,
+			     const struct of_device_id *match);
+#else
+static inline void st_sensors_of_i2c_probe(struct i2c_client *client,
+					   const struct of_device_id *match)
+{
+}
+#endif
+
+#endif /* ST_SENSORS_I2C_H */
diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h
new file mode 100644
index 000000000..d964a3563
--- /dev/null
+++ b/include/linux/iio/common/st_sensors_spi.h
@@ -0,0 +1,20 @@
+/*
+ * STMicroelectronics sensors spi library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_SPI_H
+#define ST_SENSORS_SPI_H
+
+#include <linux/spi/spi.h>
+#include <linux/iio/common/st_sensors.h>
+
+void st_sensors_spi_configure(struct iio_dev *indio_dev,
+			struct spi_device *spi, struct st_sensor_data *sdata);
+
+#endif /* ST_SENSORS_SPI_H */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
new file mode 100644
index 000000000..26fb8f634
--- /dev/null
+++ b/include/linux/iio/consumer.h
@@ -0,0 +1,209 @@
+/*
+ * Industrial I/O in kernel consumer interface
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _IIO_INKERN_CONSUMER_H_
+#define _IIO_INKERN_CONSUMER_H_
+
+#include <linux/types.h>
+#include <linux/iio/types.h>
+
+struct iio_dev;
+struct iio_chan_spec;
+struct device;
+
+/**
+ * struct iio_channel - everything needed for a consumer to use a channel
+ * @indio_dev:		Device on which the channel exists.
+ * @channel:		Full description of the channel.
+ * @data:		Data about the channel used by consumer.
+ */
+struct iio_channel {
+	struct iio_dev *indio_dev;
+	const struct iio_chan_spec *channel;
+	void *data;
+};
+
+/**
+ * iio_channel_get() - get description of all that is needed to access channel.
+ * @dev:		Pointer to consumer device. Device name must match
+ *			the name of the device as provided in the iio_map
+ *			with which the desired provider to consumer mapping
+ *			was registered.
+ * @consumer_channel:	Unique name to identify the channel on the consumer
+ *			side. This typically describes the channels use within
+ *			the consumer. E.g. 'battery_voltage'
+ */
+struct iio_channel *iio_channel_get(struct device *dev,
+				    const char *consumer_channel);
+
+/**
+ * iio_channel_release() - release channels obtained via iio_channel_get
+ * @chan:		The channel to be released.
+ */
+void iio_channel_release(struct iio_channel *chan);
+
+/**
+ * iio_channel_get_all() - get all channels associated with a client
+ * @dev:		Pointer to consumer device.
+ *
+ * Returns an array of iio_channel structures terminated with one with
+ * null iio_dev pointer.
+ * This function is used by fairly generic consumers to get all the
+ * channels registered as having this consumer.
+ */
+struct iio_channel *iio_channel_get_all(struct device *dev);
+
+/**
+ * iio_channel_release_all() - reverse iio_channel_get_all
+ * @chan:		Array of channels to be released.
+ */
+void iio_channel_release_all(struct iio_channel *chan);
+
+struct iio_cb_buffer;
+/**
+ * iio_channel_get_all_cb() - register callback for triggered capture
+ * @dev:		Pointer to client device.
+ * @cb:			Callback function.
+ * @private:		Private data passed to callback.
+ *
+ * NB right now we have no ability to mux data from multiple devices.
+ * So if the channels requested come from different devices this will
+ * fail.
+ */
+struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
+					     int (*cb)(const void *data,
+						       void *private),
+					     void *private);
+/**
+ * iio_channel_release_all_cb() - release and unregister the callback.
+ * @cb_buffer:		The callback buffer that was allocated.
+ */
+void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buffer);
+
+/**
+ * iio_channel_start_all_cb() - start the flow of data through callback.
+ * @cb_buff:		The callback buffer we are starting.
+ */
+int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff);
+
+/**
+ * iio_channel_stop_all_cb() - stop the flow of data through the callback.
+ * @cb_buff:		The callback buffer we are stopping.
+ */
+void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff);
+
+/**
+ * iio_channel_cb_get_channels() - get access to the underlying channels.
+ * @cb_buff:		The callback buffer from whom we want the channel
+ *			information.
+ *
+ * This function allows one to obtain information about the channels.
+ * Whilst this may allow direct reading if all buffers are disabled, the
+ * primary aim is to allow drivers that are consuming a channel to query
+ * things like scaling of the channel.
+ */
+struct iio_channel
+*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer);
+
+/**
+ * iio_read_channel_raw() - read from a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value read back.
+ *
+ * Note raw reads from iio channels are in adc counts and hence
+ * scale will need to be applied if standard units required.
+ */
+int iio_read_channel_raw(struct iio_channel *chan,
+			 int *val);
+
+/**
+ * iio_read_channel_average_raw() - read from a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value read back.
+ *
+ * Note raw reads from iio channels are in adc counts and hence
+ * scale will need to be applied if standard units required.
+ *
+ * In opposit to the normal iio_read_channel_raw this function
+ * returns the average of multiple reads.
+ */
+int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
+
+/**
+ * iio_read_channel_processed() - read processed value from a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value read back.
+ *
+ * Returns an error code or 0.
+ *
+ * This function will read a processed value from a channel. A processed value
+ * means that this value will have the correct unit and not some device internal
+ * representation. If the device does not support reporting a processed value
+ * the function will query the raw value and the channels scale and offset and
+ * do the appropriate transformation.
+ */
+int iio_read_channel_processed(struct iio_channel *chan, int *val);
+
+/**
+ * iio_write_channel_raw() - write to a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value being written.
+ *
+ * Note raw writes to iio channels are in dac counts and hence
+ * scale will need to be applied if standard units required.
+ */
+int iio_write_channel_raw(struct iio_channel *chan, int val);
+
+/**
+ * iio_get_channel_type() - get the type of a channel
+ * @channel:		The channel being queried.
+ * @type:		The type of the channel.
+ *
+ * returns the enum iio_chan_type of the channel
+ */
+int iio_get_channel_type(struct iio_channel *channel,
+			 enum iio_chan_type *type);
+
+/**
+ * iio_read_channel_scale() - read the scale value for a channel
+ * @chan:		The channel being queried.
+ * @val:		First part of value read back.
+ * @val2:		Second part of value read back.
+ *
+ * Note returns a description of what is in val and val2, such
+ * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_read_channel_scale(struct iio_channel *chan, int *val,
+			   int *val2);
+
+/**
+ * iio_convert_raw_to_processed() - Converts a raw value to a processed value
+ * @chan:		The channel being queried
+ * @raw:		The raw IIO to convert
+ * @processed:		The result of the conversion
+ * @scale:		Scale factor to apply during the conversion
+ *
+ * Returns an error code or 0.
+ *
+ * This function converts a raw value to processed value for a specific channel.
+ * A raw value is the device internal representation of a sample and the value
+ * returned by iio_read_channel_raw, so the unit of that value is device
+ * depended. A processed value on the other hand is value has a normed unit
+ * according with the IIO specification.
+ *
+ * The scale factor allows to increase the precession of the returned value. For
+ * a scale factor of 1 the function will return the result in the normal IIO
+ * unit for the channel type. E.g. millivolt for voltage channels, if you want
+ * nanovolts instead pass 1000000 as the scale factor.
+ */
+int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
+	int *processed, unsigned int scale);
+
+#endif
diff --git a/include/linux/iio/dac/ad5421.h b/include/linux/iio/dac/ad5421.h
new file mode 100644
index 000000000..8fd8f057a
--- /dev/null
+++ b/include/linux/iio/dac/ad5421.h
@@ -0,0 +1,28 @@
+#ifndef __IIO_DAC_AD5421_H__
+#define __IIO_DAC_AD5421_H__
+
+/**
+ * enum ad5421_current_range - Current range the AD5421 is configured for.
+ * @AD5421_CURRENT_RANGE_4mA_20mA: 4 mA to 20 mA (RANGE1,0 pins = 00)
+ * @AD5421_CURRENT_RANGE_3mA8_21mA: 3.8 mA to 21 mA (RANGE1,0 pins = x1)
+ * @AD5421_CURRENT_RANGE_3mA2_24mA: 3.2 mA to 24 mA (RANGE1,0 pins = 10)
+ */
+
+enum ad5421_current_range {
+	AD5421_CURRENT_RANGE_4mA_20mA,
+	AD5421_CURRENT_RANGE_3mA8_21mA,
+	AD5421_CURRENT_RANGE_3mA2_24mA,
+};
+
+/**
+ * struct ad5421_platform_data - AD5421 DAC driver platform data
+ * @external_vref: whether an external reference voltage is used or not
+ * @current_range: Current range the AD5421 is configured for
+ */
+
+struct ad5421_platform_data {
+	bool external_vref;
+	enum ad5421_current_range current_range;
+};
+
+#endif
diff --git a/include/linux/iio/dac/ad5504.h b/include/linux/iio/dac/ad5504.h
new file mode 100644
index 000000000..43895376a
--- /dev/null
+++ b/include/linux/iio/dac/ad5504.h
@@ -0,0 +1,16 @@
+/*
+ * AD5504 SPI DAC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef SPI_AD5504_H_
+#define SPI_AD5504_H_
+
+struct ad5504_platform_data {
+	u16				vref_mv;
+};
+
+#endif /* SPI_AD5504_H_ */
diff --git a/include/linux/iio/dac/ad5791.h b/include/linux/iio/dac/ad5791.h
new file mode 100644
index 000000000..45ee281c6
--- /dev/null
+++ b/include/linux/iio/dac/ad5791.h
@@ -0,0 +1,25 @@
+/*
+ * AD5791 SPI DAC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef SPI_AD5791_H_
+#define SPI_AD5791_H_
+
+/**
+ * struct ad5791_platform_data - platform specific information
+ * @vref_pos_mv:	Vdd Positive Analog Supply Volatge (mV)
+ * @vref_neg_mv:	Vdd Negative Analog Supply Volatge (mV)
+ * @use_rbuf_gain2:	ext. amplifier connected in gain of two configuration
+ */
+
+struct ad5791_platform_data {
+	u16				vref_pos_mv;
+	u16				vref_neg_mv;
+	bool				use_rbuf_gain2;
+};
+
+#endif /* SPI_AD5791_H_ */
diff --git a/include/linux/iio/dac/max517.h b/include/linux/iio/dac/max517.h
new file mode 100644
index 000000000..7668716cd
--- /dev/null
+++ b/include/linux/iio/dac/max517.h
@@ -0,0 +1,15 @@
+/*
+ * MAX517 DAC driver
+ *
+ * Copyright 2011 Roland Stigge <stigge@antcom.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+#ifndef IIO_DAC_MAX517_H_
+#define IIO_DAC_MAX517_H_
+
+struct max517_platform_data {
+	u16				vref_mv[8];
+};
+
+#endif /* IIO_DAC_MAX517_H_ */
diff --git a/include/linux/iio/dac/mcp4725.h b/include/linux/iio/dac/mcp4725.h
new file mode 100644
index 000000000..91530e661
--- /dev/null
+++ b/include/linux/iio/dac/mcp4725.h
@@ -0,0 +1,16 @@
+/*
+ * MCP4725 DAC driver
+ *
+ * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef IIO_DAC_MCP4725_H_
+#define IIO_DAC_MCP4725_H_
+
+struct mcp4725_platform_data {
+	u16 vref_mv;
+};
+
+#endif /* IIO_DAC_MCP4725_H_ */
diff --git a/include/linux/iio/driver.h b/include/linux/iio/driver.h
new file mode 100644
index 000000000..7dfb10ee2
--- /dev/null
+++ b/include/linux/iio/driver.h
@@ -0,0 +1,31 @@
+/*
+ * Industrial I/O in kernel access map interface.
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_INKERN_H_
+#define _IIO_INKERN_H_
+
+struct iio_map;
+
+/**
+ * iio_map_array_register() - tell the core about inkernel consumers
+ * @indio_dev:	provider device
+ * @map:	array of mappings specifying association of channel with client
+ */
+int iio_map_array_register(struct iio_dev *indio_dev,
+			   struct iio_map *map);
+
+/**
+ * iio_map_array_unregister() - tell the core to remove consumer mappings for
+ *				the given provider device
+ * @indio_dev:	provider device
+ */
+int iio_map_array_unregister(struct iio_dev *indio_dev);
+
+#endif
diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h
new file mode 100644
index 000000000..8ad87d1c5
--- /dev/null
+++ b/include/linux/iio/events.h
@@ -0,0 +1,59 @@
+/* The industrial I/O - event passing to userspace
+ *
+ * Copyright (c) 2008-2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _IIO_EVENTS_H_
+#define _IIO_EVENTS_H_
+
+#include <linux/iio/types.h>
+#include <uapi/linux/iio/events.h>
+
+/**
+ * IIO_EVENT_CODE() - create event identifier
+ * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
+ * @diff:	Whether the event is for an differential channel or not.
+ * @modifier:	Modifier for the channel. Should be one of enum iio_modifier.
+ * @direction:	Direction of the event. One of enum iio_event_direction.
+ * @type:	Type of the event. Should be one of enum iio_event_type.
+ * @chan:	Channel number for non-differential channels.
+ * @chan1:	First channel number for differential channels.
+ * @chan2:	Second channel number for differential channels.
+ */
+
+#define IIO_EVENT_CODE(chan_type, diff, modifier, direction,		\
+		       type, chan, chan1, chan2)			\
+	(((u64)type << 56) | ((u64)diff << 55) |			\
+	 ((u64)direction << 48) | ((u64)modifier << 40) |		\
+	 ((u64)chan_type << 32) | (((u16)chan2) << 16) | ((u16)chan1) | \
+	 ((u16)chan))
+
+
+/**
+ * IIO_MOD_EVENT_CODE() - create event identifier for modified channels
+ * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
+ * @number:	Channel number.
+ * @modifier:	Modifier for the channel. Should be one of enum iio_modifier.
+ * @type:	Type of the event. Should be one of enum iio_event_type.
+ * @direction:	Direction of the event. One of enum iio_event_direction.
+ */
+
+#define IIO_MOD_EVENT_CODE(chan_type, number, modifier,		\
+			   type, direction)				\
+	IIO_EVENT_CODE(chan_type, 0, modifier, direction, type, number, 0, 0)
+
+/**
+ * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels
+ * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
+ * @number:	Channel number.
+ * @type:	Type of the event. Should be one of enum iio_event_type.
+ * @direction:	Direction of the event. One of enum iio_event_direction.
+ */
+
+#define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction)	\
+	IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0)
+
+#endif
diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h
new file mode 100644
index 000000000..12ce3ee42
--- /dev/null
+++ b/include/linux/iio/frequency/ad9523.h
@@ -0,0 +1,195 @@
+/*
+ * AD9523 SPI Low Jitter Clock Generator
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_FREQUENCY_AD9523_H_
+#define IIO_FREQUENCY_AD9523_H_
+
+enum outp_drv_mode {
+	TRISTATE,
+	LVPECL_8mA,
+	LVDS_4mA,
+	LVDS_7mA,
+	HSTL0_16mA,
+	HSTL1_8mA,
+	CMOS_CONF1,
+	CMOS_CONF2,
+	CMOS_CONF3,
+	CMOS_CONF4,
+	CMOS_CONF5,
+	CMOS_CONF6,
+	CMOS_CONF7,
+	CMOS_CONF8,
+	CMOS_CONF9
+};
+
+enum ref_sel_mode {
+	NONEREVERTIVE_STAY_ON_REFB,
+	REVERT_TO_REFA,
+	SELECT_REFA,
+	SELECT_REFB,
+	EXT_REF_SEL
+};
+
+/**
+ * struct ad9523_channel_spec - Output channel configuration
+ *
+ * @channel_num: Output channel number.
+ * @divider_output_invert_en: Invert the polarity of the output clock.
+ * @sync_ignore_en: Ignore chip-level SYNC signal.
+ * @low_power_mode_en: Reduce power used in the differential output modes.
+ * @use_alt_clock_src: Channel divider uses alternative clk source.
+ * @output_dis: Disables, powers down the entire channel.
+ * @driver_mode: Output driver mode (logic level family).
+ * @divider_phase: Divider initial phase after a SYNC. Range 0..63
+		   LSB = 1/2 of a period of the divider input clock.
+ * @channel_divider: 10-bit channel divider.
+ * @extended_name: Optional descriptive channel name.
+ */
+
+struct ad9523_channel_spec {
+	unsigned		channel_num;
+	bool			divider_output_invert_en;
+	bool			sync_ignore_en;
+	bool			low_power_mode_en;
+				 /* CH0..CH3 VCXO, CH4..CH9 VCO2 */
+	bool			use_alt_clock_src;
+	bool			output_dis;
+	enum outp_drv_mode	driver_mode;
+	unsigned char		divider_phase;
+	unsigned short		channel_divider;
+	char			extended_name[16];
+};
+
+enum pll1_rzero_resistor {
+	RZERO_883_OHM,
+	RZERO_677_OHM,
+	RZERO_341_OHM,
+	RZERO_135_OHM,
+	RZERO_10_OHM,
+	RZERO_USE_EXT_RES = 8,
+};
+
+enum rpole2_resistor {
+	RPOLE2_900_OHM,
+	RPOLE2_450_OHM,
+	RPOLE2_300_OHM,
+	RPOLE2_225_OHM,
+};
+
+enum rzero_resistor {
+	RZERO_3250_OHM,
+	RZERO_2750_OHM,
+	RZERO_2250_OHM,
+	RZERO_2100_OHM,
+	RZERO_3000_OHM,
+	RZERO_2500_OHM,
+	RZERO_2000_OHM,
+	RZERO_1850_OHM,
+};
+
+enum cpole1_capacitor {
+	CPOLE1_0_PF,
+	CPOLE1_8_PF,
+	CPOLE1_16_PF,
+	CPOLE1_24_PF,
+	_CPOLE1_24_PF, /* place holder */
+	CPOLE1_32_PF,
+	CPOLE1_40_PF,
+	CPOLE1_48_PF,
+};
+
+/**
+ * struct ad9523_platform_data - platform specific information
+ *
+ * @vcxo_freq: External VCXO frequency in Hz
+ * @refa_diff_rcv_en: REFA differential/single-ended input selection.
+ * @refb_diff_rcv_en: REFB differential/single-ended input selection.
+ * @zd_in_diff_en: Zero Delay differential/single-ended input selection.
+ * @osc_in_diff_en: OSC differential/ single-ended input selection.
+ * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable.
+ * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable.
+ * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable.
+ * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable.
+ * @refa_r_div: PLL1 10-bit REFA R divider.
+ * @refb_r_div: PLL1 10-bit REFB R divider.
+ * @pll1_feedback_div: PLL1 10-bit Feedback N divider.
+ * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA).
+ * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection.
+ * @osc_in_feedback_en: PLL1 feedback path, local feedback from
+ *			the OSC_IN receiver or zero delay mode
+ * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection.
+ * @ref_mode: Reference selection mode.
+ * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA).
+ * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4.
+ * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63.
+ * @pll2_freq_doubler_en: PLL2 frequency doubler enable.
+ * @pll2_r2_div: PLL2 R2 divider, range 0..31.
+ * @pll2_vco_diff_m1: VCO1 divider, range 3..5.
+ * @pll2_vco_diff_m2: VCO2 divider, range 3..5.
+ * @rpole2: PLL2 loop filter Rpole resistor value.
+ * @rzero: PLL2 loop filter Rzero resistor value.
+ * @cpole1: PLL2 loop filter Cpole capacitor value.
+ * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable.
+ * @num_channels: Array size of struct ad9523_channel_spec.
+ * @channels: Pointer to channel array.
+ * @name: Optional alternative iio device name.
+ */
+
+struct ad9523_platform_data {
+	unsigned long vcxo_freq;
+
+	/* Differential/ Single-Ended Input Configuration */
+	bool				refa_diff_rcv_en;
+	bool				refb_diff_rcv_en;
+	bool				zd_in_diff_en;
+	bool				osc_in_diff_en;
+
+	/*
+	 * Valid if differential input disabled
+	 * if false defaults to pos input
+	 */
+	bool				refa_cmos_neg_inp_en;
+	bool				refb_cmos_neg_inp_en;
+	bool				zd_in_cmos_neg_inp_en;
+	bool				osc_in_cmos_neg_inp_en;
+
+	/* PLL1 Setting */
+	unsigned short			refa_r_div;
+	unsigned short			refb_r_div;
+	unsigned short			pll1_feedback_div;
+	unsigned short			pll1_charge_pump_current_nA;
+	bool				zero_delay_mode_internal_en;
+	bool				osc_in_feedback_en;
+	enum pll1_rzero_resistor	pll1_loop_filter_rzero;
+
+	/* Reference */
+	enum ref_sel_mode		ref_mode;
+
+	/* PLL2 Setting */
+	unsigned int			pll2_charge_pump_current_nA;
+	unsigned char			pll2_ndiv_a_cnt;
+	unsigned char			pll2_ndiv_b_cnt;
+	bool				pll2_freq_doubler_en;
+	unsigned char			pll2_r2_div;
+	unsigned char			pll2_vco_diff_m1; /* 3..5 */
+	unsigned char			pll2_vco_diff_m2; /* 3..5 */
+
+	/* Loop Filter PLL2 */
+	enum rpole2_resistor		rpole2;
+	enum rzero_resistor		rzero;
+	enum cpole1_capacitor		cpole1;
+	bool				rzero_bypass_en;
+
+	/* Output Channel Configuration */
+	int				num_channels;
+	struct ad9523_channel_spec	*channels;
+
+	char				name[SPI_NAME_SIZE];
+};
+
+#endif /* IIO_FREQUENCY_AD9523_H_ */
diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h
new file mode 100644
index 000000000..ffd8c8f90
--- /dev/null
+++ b/include/linux/iio/frequency/adf4350.h
@@ -0,0 +1,128 @@
+/*
+ * ADF4350/ADF4351 SPI PLL driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_PLL_ADF4350_H_
+#define IIO_PLL_ADF4350_H_
+
+/* Registers */
+#define ADF4350_REG0	0
+#define ADF4350_REG1	1
+#define ADF4350_REG2	2
+#define ADF4350_REG3	3
+#define ADF4350_REG4	4
+#define ADF4350_REG5	5
+
+/* REG0 Bit Definitions */
+#define ADF4350_REG0_FRACT(x)			(((x) & 0xFFF) << 3)
+#define ADF4350_REG0_INT(x)			(((x) & 0xFFFF) << 15)
+
+/* REG1 Bit Definitions */
+#define ADF4350_REG1_MOD(x)			(((x) & 0xFFF) << 3)
+#define ADF4350_REG1_PHASE(x)			(((x) & 0xFFF) << 15)
+#define ADF4350_REG1_PRESCALER			(1 << 27)
+
+/* REG2 Bit Definitions */
+#define ADF4350_REG2_COUNTER_RESET_EN		(1 << 3)
+#define ADF4350_REG2_CP_THREESTATE_EN		(1 << 4)
+#define ADF4350_REG2_POWER_DOWN_EN		(1 << 5)
+#define ADF4350_REG2_PD_POLARITY_POS		(1 << 6)
+#define ADF4350_REG2_LDP_6ns			(1 << 7)
+#define ADF4350_REG2_LDP_10ns			(0 << 7)
+#define ADF4350_REG2_LDF_FRACT_N		(0 << 8)
+#define ADF4350_REG2_LDF_INT_N			(1 << 8)
+#define ADF4350_REG2_CHARGE_PUMP_CURR_uA(x)	(((((x)-312) / 312) & 0xF) << 9)
+#define ADF4350_REG2_DOUBLE_BUFF_EN		(1 << 13)
+#define ADF4350_REG2_10BIT_R_CNT(x)		((x) << 14)
+#define ADF4350_REG2_RDIV2_EN			(1 << 24)
+#define ADF4350_REG2_RMULT2_EN			(1 << 25)
+#define ADF4350_REG2_MUXOUT(x)			((x) << 26)
+#define ADF4350_REG2_NOISE_MODE(x)		(((unsigned)(x)) << 29)
+#define ADF4350_MUXOUT_THREESTATE		0
+#define ADF4350_MUXOUT_DVDD			1
+#define ADF4350_MUXOUT_GND			2
+#define ADF4350_MUXOUT_R_DIV_OUT		3
+#define ADF4350_MUXOUT_N_DIV_OUT		4
+#define ADF4350_MUXOUT_ANALOG_LOCK_DETECT	5
+#define ADF4350_MUXOUT_DIGITAL_LOCK_DETECT	6
+
+/* REG3 Bit Definitions */
+#define ADF4350_REG3_12BIT_CLKDIV(x)		((x) << 3)
+#define ADF4350_REG3_12BIT_CLKDIV_MODE(x)	((x) << 16)
+#define ADF4350_REG3_12BIT_CSR_EN		(1 << 18)
+#define ADF4351_REG3_CHARGE_CANCELLATION_EN	(1 << 21)
+#define ADF4351_REG3_ANTI_BACKLASH_3ns_EN	(1 << 22)
+#define ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH	(1 << 23)
+
+/* REG4 Bit Definitions */
+#define ADF4350_REG4_OUTPUT_PWR(x)		((x) << 3)
+#define ADF4350_REG4_RF_OUT_EN			(1 << 5)
+#define ADF4350_REG4_AUX_OUTPUT_PWR(x)		((x) << 6)
+#define ADF4350_REG4_AUX_OUTPUT_EN		(1 << 8)
+#define ADF4350_REG4_AUX_OUTPUT_FUND		(1 << 9)
+#define ADF4350_REG4_AUX_OUTPUT_DIV		(0 << 9)
+#define ADF4350_REG4_MUTE_TILL_LOCK_EN		(1 << 10)
+#define ADF4350_REG4_VCO_PWRDOWN_EN		(1 << 11)
+#define ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(x)	((x) << 12)
+#define ADF4350_REG4_RF_DIV_SEL(x)		((x) << 20)
+#define ADF4350_REG4_FEEDBACK_DIVIDED		(0 << 23)
+#define ADF4350_REG4_FEEDBACK_FUND		(1 << 23)
+
+/* REG5 Bit Definitions */
+#define ADF4350_REG5_LD_PIN_MODE_LOW		(0 << 22)
+#define ADF4350_REG5_LD_PIN_MODE_DIGITAL	(1 << 22)
+#define ADF4350_REG5_LD_PIN_MODE_HIGH		(3 << 22)
+
+/* Specifications */
+#define ADF4350_MAX_OUT_FREQ		4400000000ULL /* Hz */
+#define ADF4350_MIN_OUT_FREQ		137500000 /* Hz */
+#define ADF4351_MIN_OUT_FREQ		34375000 /* Hz */
+#define ADF4350_MIN_VCO_FREQ		2200000000ULL /* Hz */
+#define ADF4350_MAX_FREQ_45_PRESC	3000000000ULL /* Hz */
+#define ADF4350_MAX_FREQ_PFD		32000000 /* Hz */
+#define ADF4350_MAX_BANDSEL_CLK		125000 /* Hz */
+#define ADF4350_MAX_FREQ_REFIN		250000000 /* Hz */
+#define ADF4350_MAX_MODULUS		4095
+#define ADF4350_MAX_R_CNT		1023
+
+
+/**
+ * struct adf4350_platform_data - platform specific information
+ * @name:		Optional device name.
+ * @clkin:		REFin frequency in Hz.
+ * @channel_spacing:	Channel spacing in Hz (influences MODULUS).
+ * @power_up_frequency:	Optional, If set in Hz the PLL tunes to the desired
+ *			frequency on probe.
+ * @ref_div_factor:	Optional, if set the driver skips dynamic calculation
+ *			and uses this default value instead.
+ * @ref_doubler_en:	Enables reference doubler.
+ * @ref_div2_en:	Enables reference divider.
+ * @r2_user_settings:	User defined settings for ADF4350/1 REGISTER_2.
+ * @r3_user_settings:	User defined settings for ADF4350/1 REGISTER_3.
+ * @r4_user_settings:	User defined settings for ADF4350/1 REGISTER_4.
+ * @gpio_lock_detect:	Optional, if set with a valid GPIO number,
+ *			pll lock state is tested upon read.
+ *			If not used - set to -1.
+ */
+
+struct adf4350_platform_data {
+	char			name[32];
+	unsigned long		clkin;
+	unsigned long		channel_spacing;
+	unsigned long long	power_up_frequency;
+
+	unsigned short		ref_div_factor; /* 10-bit R counter */
+	bool			ref_doubler_en;
+	bool			ref_div2_en;
+
+	unsigned		r2_user_settings;
+	unsigned		r3_user_settings;
+	unsigned		r4_user_settings;
+	int			gpio_lock_detect;
+};
+
+#endif /* IIO_PLL_ADF4350_H_ */
diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h
new file mode 100644
index 000000000..2a820850f
--- /dev/null
+++ b/include/linux/iio/gyro/itg3200.h
@@ -0,0 +1,154 @@
+/*
+ * itg3200.h -- support InvenSense ITG3200
+ *              Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef I2C_ITG3200_H_
+#define I2C_ITG3200_H_
+
+#include <linux/iio/iio.h>
+
+/* Register with I2C address (34h) */
+#define ITG3200_REG_ADDRESS		0x00
+
+/* Sample rate divider
+ * Range: 0 to 255
+ * Default value: 0x00 */
+#define ITG3200_REG_SAMPLE_RATE_DIV	0x15
+
+/* Digital low pass filter settings */
+#define ITG3200_REG_DLPF		0x16
+/* DLPF full scale range */
+#define ITG3200_DLPF_FS_SEL_2000	0x18
+/* Bandwidth (Hz) and internal sample rate
+ * (kHz) of DLPF */
+#define ITG3200_DLPF_256_8		0x00
+#define ITG3200_DLPF_188_1		0x01
+#define ITG3200_DLPF_98_1		0x02
+#define ITG3200_DLPF_42_1		0x03
+#define ITG3200_DLPF_20_1		0x04
+#define ITG3200_DLPF_10_1		0x05
+#define ITG3200_DLPF_5_1		0x06
+
+#define ITG3200_DLPF_CFG_MASK		0x07
+
+/* Configuration for interrupt operations */
+#define ITG3200_REG_IRQ_CONFIG		0x17
+/* Logic level */
+#define ITG3200_IRQ_ACTIVE_LOW		0x80
+#define ITG3200_IRQ_ACTIVE_HIGH		0x00
+/* Drive type */
+#define ITG3200_IRQ_OPEN_DRAIN		0x40
+#define ITG3200_IRQ_PUSH_PULL		0x00
+/* Latch mode */
+#define ITG3200_IRQ_LATCH_UNTIL_CLEARED	0x20
+#define ITG3200_IRQ_LATCH_50US_PULSE	0x00
+/* Latch clear method */
+#define ITG3200_IRQ_LATCH_CLEAR_ANY	0x10
+#define ITG3200_IRQ_LATCH_CLEAR_STATUS	0x00
+/* Enable interrupt when device is ready */
+#define ITG3200_IRQ_DEVICE_RDY_ENABLE	0x04
+/* Enable interrupt when data is available */
+#define ITG3200_IRQ_DATA_RDY_ENABLE	0x01
+
+/* Determine the status of ITG-3200 interrupts */
+#define ITG3200_REG_IRQ_STATUS		0x1A
+/* Status of 'device is ready'-interrupt */
+#define ITG3200_IRQ_DEVICE_RDY_STATUS	0x04
+/* Status of 'data is available'-interrupt */
+#define ITG3200_IRQ_DATA_RDY_STATUS	0x01
+
+/* Sensor registers */
+#define ITG3200_REG_TEMP_OUT_H		0x1B
+#define ITG3200_REG_TEMP_OUT_L		0x1C
+#define ITG3200_REG_GYRO_XOUT_H		0x1D
+#define ITG3200_REG_GYRO_XOUT_L		0x1E
+#define ITG3200_REG_GYRO_YOUT_H		0x1F
+#define ITG3200_REG_GYRO_YOUT_L		0x20
+#define ITG3200_REG_GYRO_ZOUT_H		0x21
+#define ITG3200_REG_GYRO_ZOUT_L		0x22
+
+/* Power management */
+#define ITG3200_REG_POWER_MANAGEMENT	0x3E
+/* Reset device and internal registers to the
+ * power-up-default settings */
+#define ITG3200_RESET			0x80
+/* Enable low power sleep mode */
+#define ITG3200_SLEEP			0x40
+/* Put according gyroscope in standby mode */
+#define ITG3200_STANDBY_GYRO_X		0x20
+#define ITG3200_STANDBY_GYRO_Y		0x10
+#define ITG3200_STANDBY_GYRO_Z		0x08
+/* Determine the device clock source */
+#define ITG3200_CLK_INTERNAL		0x00
+#define ITG3200_CLK_GYRO_X		0x01
+#define ITG3200_CLK_GYRO_Y		0x02
+#define ITG3200_CLK_GYRO_Z		0x03
+#define ITG3200_CLK_EXT_32K		0x04
+#define ITG3200_CLK_EXT_19M		0x05
+
+
+/**
+ * struct itg3200 - device instance specific data
+ * @i2c:    actual i2c_client
+ * @trig:   data ready trigger from itg3200 pin
+ **/
+struct itg3200 {
+	struct i2c_client	*i2c;
+	struct iio_trigger	*trig;
+};
+
+enum ITG3200_SCAN_INDEX {
+	ITG3200_SCAN_TEMP,
+	ITG3200_SCAN_GYRO_X,
+	ITG3200_SCAN_GYRO_Y,
+	ITG3200_SCAN_GYRO_Z,
+	ITG3200_SCAN_ELEMENTS,
+};
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 val);
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 *val);
+
+
+#ifdef CONFIG_IIO_BUFFER
+
+void itg3200_remove_trigger(struct iio_dev *indio_dev);
+int itg3200_probe_trigger(struct iio_dev *indio_dev);
+
+int itg3200_buffer_configure(struct iio_dev *indio_dev);
+void itg3200_buffer_unconfigure(struct iio_dev *indio_dev);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline void itg3200_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+
+static inline int itg3200_probe_trigger(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline int itg3200_buffer_configure(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev)
+{
+}
+
+#endif  /* CONFIG_IIO_BUFFER */
+
+#endif /* ITG3200_H_ */
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
new file mode 100644
index 000000000..d86b753e9
--- /dev/null
+++ b/include/linux/iio/iio.h
@@ -0,0 +1,652 @@
+
+/* The industrial I/O core
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _INDUSTRIAL_IO_H_
+#define _INDUSTRIAL_IO_H_
+
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/iio/types.h>
+#include <linux/of.h>
+/* IIO TODO LIST */
+/*
+ * Provide means of adjusting timer accuracy.
+ * Currently assumes nano seconds.
+ */
+
+enum iio_chan_info_enum {
+	IIO_CHAN_INFO_RAW = 0,
+	IIO_CHAN_INFO_PROCESSED,
+	IIO_CHAN_INFO_SCALE,
+	IIO_CHAN_INFO_OFFSET,
+	IIO_CHAN_INFO_CALIBSCALE,
+	IIO_CHAN_INFO_CALIBBIAS,
+	IIO_CHAN_INFO_PEAK,
+	IIO_CHAN_INFO_PEAK_SCALE,
+	IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
+	IIO_CHAN_INFO_AVERAGE_RAW,
+	IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+	IIO_CHAN_INFO_SAMP_FREQ,
+	IIO_CHAN_INFO_FREQUENCY,
+	IIO_CHAN_INFO_PHASE,
+	IIO_CHAN_INFO_HARDWAREGAIN,
+	IIO_CHAN_INFO_HYSTERESIS,
+	IIO_CHAN_INFO_INT_TIME,
+	IIO_CHAN_INFO_ENABLE,
+	IIO_CHAN_INFO_CALIBHEIGHT,
+	IIO_CHAN_INFO_CALIBWEIGHT,
+	IIO_CHAN_INFO_DEBOUNCE_COUNT,
+	IIO_CHAN_INFO_DEBOUNCE_TIME,
+};
+
+enum iio_shared_by {
+	IIO_SEPARATE,
+	IIO_SHARED_BY_TYPE,
+	IIO_SHARED_BY_DIR,
+	IIO_SHARED_BY_ALL
+};
+
+enum iio_endian {
+	IIO_CPU,
+	IIO_BE,
+	IIO_LE,
+};
+
+struct iio_chan_spec;
+struct iio_dev;
+
+/**
+ * struct iio_chan_spec_ext_info - Extended channel info attribute
+ * @name:	Info attribute name
+ * @shared:	Whether this attribute is shared between all channels.
+ * @read:	Read callback for this info attribute, may be NULL.
+ * @write:	Write callback for this info attribute, may be NULL.
+ * @private:	Data private to the driver.
+ */
+struct iio_chan_spec_ext_info {
+	const char *name;
+	enum iio_shared_by shared;
+	ssize_t (*read)(struct iio_dev *, uintptr_t private,
+			struct iio_chan_spec const *, char *buf);
+	ssize_t (*write)(struct iio_dev *, uintptr_t private,
+			 struct iio_chan_spec const *, const char *buf,
+			 size_t len);
+	uintptr_t private;
+};
+
+/**
+ * struct iio_enum - Enum channel info attribute
+ * @items:	An array of strings.
+ * @num_items:	Length of the item array.
+ * @set:	Set callback function, may be NULL.
+ * @get:	Get callback function, may be NULL.
+ *
+ * The iio_enum struct can be used to implement enum style channel attributes.
+ * Enum style attributes are those which have a set of strings which map to
+ * unsigned integer values. The IIO enum helper code takes care of mapping
+ * between value and string as well as generating a "_available" file which
+ * contains a list of all available items. The set callback will be called when
+ * the attribute is updated. The last parameter is the index to the newly
+ * activated item. The get callback will be used to query the currently active
+ * item and is supposed to return the index for it.
+ */
+struct iio_enum {
+	const char * const *items;
+	unsigned int num_items;
+	int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int);
+	int (*get)(struct iio_dev *, const struct iio_chan_spec *);
+};
+
+ssize_t iio_enum_available_read(struct iio_dev *indio_dev,
+	uintptr_t priv, const struct iio_chan_spec *chan, char *buf);
+ssize_t iio_enum_read(struct iio_dev *indio_dev,
+	uintptr_t priv, const struct iio_chan_spec *chan, char *buf);
+ssize_t iio_enum_write(struct iio_dev *indio_dev,
+	uintptr_t priv, const struct iio_chan_spec *chan, const char *buf,
+	size_t len);
+
+/**
+ * IIO_ENUM() - Initialize enum extended channel attribute
+ * @_name:	Attribute name
+ * @_shared:	Whether the attribute is shared between all channels
+ * @_e:		Pointer to an iio_enum struct
+ *
+ * This should usually be used together with IIO_ENUM_AVAILABLE()
+ */
+#define IIO_ENUM(_name, _shared, _e) \
+{ \
+	.name = (_name), \
+	.shared = (_shared), \
+	.read = iio_enum_read, \
+	.write = iio_enum_write, \
+	.private = (uintptr_t)(_e), \
+}
+
+/**
+ * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute
+ * @_name:	Attribute name ("_available" will be appended to the name)
+ * @_e:		Pointer to an iio_enum struct
+ *
+ * Creates a read only attribute which lists all the available enum items in a
+ * space separated list. This should usually be used together with IIO_ENUM()
+ */
+#define IIO_ENUM_AVAILABLE(_name, _e) \
+{ \
+	.name = (_name "_available"), \
+	.shared = IIO_SHARED_BY_TYPE, \
+	.read = iio_enum_available_read, \
+	.private = (uintptr_t)(_e), \
+}
+
+/**
+ * struct iio_event_spec - specification for a channel event
+ * @type:		    Type of the event
+ * @dir:		    Direction of the event
+ * @mask_separate:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be registered per channel.
+ * @mask_shared_by_type:    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by channel type.
+ * @mask_shared_by_dir:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by channel type and
+ *			    direction.
+ * @mask_shared_by_all:	    Bit mask of enum iio_event_info values. Attributes
+ *			    set in this mask will be shared by all channels.
+ */
+struct iio_event_spec {
+	enum iio_event_type type;
+	enum iio_event_direction dir;
+	unsigned long mask_separate;
+	unsigned long mask_shared_by_type;
+	unsigned long mask_shared_by_dir;
+	unsigned long mask_shared_by_all;
+};
+
+/**
+ * struct iio_chan_spec - specification of a single channel
+ * @type:		What type of measurement is the channel making.
+ * @channel:		What number do we wish to assign the channel.
+ * @channel2:		If there is a second number for a differential
+ *			channel then this is it. If modified is set then the
+ *			value here specifies the modifier.
+ * @address:		Driver specific identifier.
+ * @scan_index:		Monotonic index to give ordering in scans when read
+ *			from a buffer.
+ * @scan_type:		Sign:		's' or 'u' to specify signed or unsigned
+ *			realbits:	Number of valid bits of data
+ *			storage_bits:	Realbits + padding
+ *			shift:		Shift right by this before masking out
+ *					realbits.
+ *			endianness:	little or big endian
+ *			repeat:		Number of times real/storage bits
+ *					repeats. When the repeat element is
+ *					more than 1, then the type element in
+ *					sysfs will show a repeat value.
+ *					Otherwise, the number of repetitions is
+ *					omitted.
+ * @info_mask_separate: What information is to be exported that is specific to
+ *			this channel.
+ * @info_mask_shared_by_type: What information is to be exported that is shared
+ *			by all channels of the same type.
+ * @info_mask_shared_by_dir: What information is to be exported that is shared
+ *			by all channels of the same direction.
+ * @info_mask_shared_by_all: What information is to be exported that is shared
+ *			by all channels.
+ * @event_spec:		Array of events which should be registered for this
+ *			channel.
+ * @num_event_specs:	Size of the event_spec array.
+ * @ext_info:		Array of extended info attributes for this channel.
+ *			The array is NULL terminated, the last element should
+ *			have its name field set to NULL.
+ * @extend_name:	Allows labeling of channel attributes with an
+ *			informative name. Note this has no effect codes etc,
+ *			unlike modifiers.
+ * @datasheet_name:	A name used in in-kernel mapping of channels. It should
+ *			correspond to the first name that the channel is referred
+ *			to by in the datasheet (e.g. IND), or the nearest
+ *			possible compound name (e.g. IND-INC).
+ * @modified:		Does a modifier apply to this channel. What these are
+ *			depends on the channel type.  Modifier is set in
+ *			channel2. Examples are IIO_MOD_X for axial sensors about
+ *			the 'x' axis.
+ * @indexed:		Specify the channel has a numerical index. If not,
+ *			the channel index number will be suppressed for sysfs
+ *			attributes but not for event codes.
+ * @output:		Channel is output.
+ * @differential:	Channel is differential.
+ */
+struct iio_chan_spec {
+	enum iio_chan_type	type;
+	int			channel;
+	int			channel2;
+	unsigned long		address;
+	int			scan_index;
+	struct {
+		char	sign;
+		u8	realbits;
+		u8	storagebits;
+		u8	shift;
+		u8	repeat;
+		enum iio_endian endianness;
+	} scan_type;
+	long			info_mask_separate;
+	long			info_mask_shared_by_type;
+	long			info_mask_shared_by_dir;
+	long			info_mask_shared_by_all;
+	const struct iio_event_spec *event_spec;
+	unsigned int		num_event_specs;
+	const struct iio_chan_spec_ext_info *ext_info;
+	const char		*extend_name;
+	const char		*datasheet_name;
+	unsigned		modified:1;
+	unsigned		indexed:1;
+	unsigned		output:1;
+	unsigned		differential:1;
+};
+
+
+/**
+ * iio_channel_has_info() - Checks whether a channel supports a info attribute
+ * @chan: The channel to be queried
+ * @type: Type of the info attribute to be checked
+ *
+ * Returns true if the channels supports reporting values for the given info
+ * attribute type, false otherwise.
+ */
+static inline bool iio_channel_has_info(const struct iio_chan_spec *chan,
+	enum iio_chan_info_enum type)
+{
+	return (chan->info_mask_separate & BIT(type)) |
+		(chan->info_mask_shared_by_type & BIT(type)) |
+		(chan->info_mask_shared_by_dir & BIT(type)) |
+		(chan->info_mask_shared_by_all & BIT(type));
+}
+
+#define IIO_CHAN_SOFT_TIMESTAMP(_si) {					\
+	.type = IIO_TIMESTAMP,						\
+	.channel = -1,							\
+	.scan_index = _si,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 64,					\
+		.storagebits = 64,					\
+		},							\
+}
+
+/**
+ * iio_get_time_ns() - utility function to get a time stamp for events etc
+ **/
+static inline s64 iio_get_time_ns(void)
+{
+	return ktime_get_real_ns();
+}
+
+/* Device operating modes */
+#define INDIO_DIRECT_MODE		0x01
+#define INDIO_BUFFER_TRIGGERED		0x02
+#define INDIO_BUFFER_SOFTWARE		0x04
+#define INDIO_BUFFER_HARDWARE		0x08
+
+#define INDIO_ALL_BUFFER_MODES					\
+	(INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE | INDIO_BUFFER_SOFTWARE)
+
+#define INDIO_MAX_RAW_ELEMENTS		4
+
+struct iio_trigger; /* forward declaration */
+struct iio_dev;
+
+/**
+ * struct iio_info - constant information about device
+ * @driver_module:	module structure used to ensure correct
+ *			ownership of chrdevs etc
+ * @event_attrs:	event control attributes
+ * @attrs:		general purpose device attributes
+ * @read_raw:		function to request a value from the device.
+ *			mask specifies which value. Note 0 means a reading of
+ *			the channel in question.  Return value will specify the
+ *			type of value returned by the device. val and val2 will
+ *			contain the elements making up the returned value.
+ * @read_raw_multi:	function to return values from the device.
+ *			mask specifies which value. Note 0 means a reading of
+ *			the channel in question.  Return value will specify the
+ *			type of value returned by the device. vals pointer
+ *			contain the elements making up the returned value.
+ *			max_len specifies maximum number of elements
+ *			vals pointer can contain. val_len is used to return
+ *			length of valid elements in vals.
+ * @write_raw:		function to write a value to the device.
+ *			Parameters are the same as for read_raw.
+ * @write_raw_get_fmt:	callback function to query the expected
+ *			format/precision. If not set by the driver, write_raw
+ *			returns IIO_VAL_INT_PLUS_MICRO.
+ * @read_event_config:	find out if the event is enabled.
+ * @write_event_config:	set if the event is enabled.
+ * @read_event_value:	read a configuration value associated with the event.
+ * @write_event_value:	write a configuration value for the event.
+ * @validate_trigger:	function to validate the trigger when the
+ *			current trigger gets changed.
+ * @update_scan_mode:	function to configure device and scan buffer when
+ *			channels have changed
+ * @debugfs_reg_access:	function to read or write register value of device
+ * @of_xlate:		function pointer to obtain channel specifier index.
+ *			When #iio-cells is greater than '0', the driver could
+ *			provide a custom of_xlate function that reads the
+ *			*args* and returns the appropriate index in registered
+ *			IIO channels array.
+ * @hwfifo_set_watermark: function pointer to set the current hardware
+ *			fifo watermark level; see hwfifo_* entries in
+ *			Documentation/ABI/testing/sysfs-bus-iio for details on
+ *			how the hardware fifo operates
+ * @hwfifo_flush_to_buffer: function pointer to flush the samples stored
+ *			in the hardware fifo to the device buffer. The driver
+ *			should not flush more than count samples. The function
+ *			must return the number of samples flushed, 0 if no
+ *			samples were flushed or a negative integer if no samples
+ *			were flushed and there was an error.
+ **/
+struct iio_info {
+	struct module			*driver_module;
+	struct attribute_group		*event_attrs;
+	const struct attribute_group	*attrs;
+
+	int (*read_raw)(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val,
+			int *val2,
+			long mask);
+
+	int (*read_raw_multi)(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int max_len,
+			int *vals,
+			int *val_len,
+			long mask);
+
+	int (*write_raw)(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 int val,
+			 int val2,
+			 long mask);
+
+	int (*write_raw_get_fmt)(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 long mask);
+
+	int (*read_event_config)(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir);
+
+	int (*write_event_config)(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  int state);
+
+	int (*read_event_value)(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int *val, int *val2);
+
+	int (*write_event_value)(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int val, int val2);
+
+	int (*validate_trigger)(struct iio_dev *indio_dev,
+				struct iio_trigger *trig);
+	int (*update_scan_mode)(struct iio_dev *indio_dev,
+				const unsigned long *scan_mask);
+	int (*debugfs_reg_access)(struct iio_dev *indio_dev,
+				  unsigned reg, unsigned writeval,
+				  unsigned *readval);
+	int (*of_xlate)(struct iio_dev *indio_dev,
+			const struct of_phandle_args *iiospec);
+	int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val);
+	int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev,
+				      unsigned count);
+};
+
+/**
+ * struct iio_buffer_setup_ops - buffer setup related callbacks
+ * @preenable:		[DRIVER] function to run prior to marking buffer enabled
+ * @postenable:		[DRIVER] function to run after marking buffer enabled
+ * @predisable:		[DRIVER] function to run prior to marking buffer
+ *			disabled
+ * @postdisable:	[DRIVER] function to run after marking buffer disabled
+ * @validate_scan_mask: [DRIVER] function callback to check whether a given
+ *			scan mask is valid for the device.
+ */
+struct iio_buffer_setup_ops {
+	int (*preenable)(struct iio_dev *);
+	int (*postenable)(struct iio_dev *);
+	int (*predisable)(struct iio_dev *);
+	int (*postdisable)(struct iio_dev *);
+	bool (*validate_scan_mask)(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask);
+};
+
+/**
+ * struct iio_dev - industrial I/O device
+ * @id:			[INTERN] used to identify device internally
+ * @modes:		[DRIVER] operating modes supported by device
+ * @currentmode:	[DRIVER] current operating mode
+ * @dev:		[DRIVER] device structure, should be assigned a parent
+ *			and owner
+ * @event_interface:	[INTERN] event chrdevs associated with interrupt lines
+ * @buffer:		[DRIVER] any buffer present
+ * @buffer_list:	[INTERN] list of all buffers currently attached
+ * @scan_bytes:		[INTERN] num bytes captured to be fed to buffer demux
+ * @mlock:		[INTERN] lock used to prevent simultaneous device state
+ *			changes
+ * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
+ * @masklength:		[INTERN] the length of the mask established from
+ *			channels
+ * @active_scan_mask:	[INTERN] union of all scan masks requested by buffers
+ * @scan_timestamp:	[INTERN] set if any buffers have requested timestamp
+ * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
+ * @trig:		[INTERN] current device trigger (buffer modes)
+ * @pollfunc:		[DRIVER] function run on trigger being received
+ * @channels:		[DRIVER] channel specification structure table
+ * @num_channels:	[DRIVER] number of channels specified in @channels.
+ * @channel_attr_list:	[INTERN] keep track of automatically created channel
+ *			attributes
+ * @chan_attr_group:	[INTERN] group for all attrs in base directory
+ * @name:		[DRIVER] name of the device.
+ * @info:		[DRIVER] callbacks and constant info from driver
+ * @info_exist_lock:	[INTERN] lock to prevent use during removal
+ * @setup_ops:		[DRIVER] callbacks to call before and after buffer
+ *			enable/disable
+ * @chrdev:		[INTERN] associated character device
+ * @groups:		[INTERN] attribute groups
+ * @groupcounter:	[INTERN] index of next attribute group
+ * @flags:		[INTERN] file ops related flags including busy flag.
+ * @debugfs_dentry:	[INTERN] device specific debugfs dentry.
+ * @cached_reg_addr:	[INTERN] cached register address for debugfs reads.
+ */
+struct iio_dev {
+	int				id;
+
+	int				modes;
+	int				currentmode;
+	struct device			dev;
+
+	struct iio_event_interface	*event_interface;
+
+	struct iio_buffer		*buffer;
+	struct list_head		buffer_list;
+	int				scan_bytes;
+	struct mutex			mlock;
+
+	const unsigned long		*available_scan_masks;
+	unsigned			masklength;
+	const unsigned long		*active_scan_mask;
+	bool				scan_timestamp;
+	unsigned			scan_index_timestamp;
+	struct iio_trigger		*trig;
+	struct iio_poll_func		*pollfunc;
+
+	struct iio_chan_spec const	*channels;
+	int				num_channels;
+
+	struct list_head		channel_attr_list;
+	struct attribute_group		chan_attr_group;
+	const char			*name;
+	const struct iio_info		*info;
+	struct mutex			info_exist_lock;
+	const struct iio_buffer_setup_ops	*setup_ops;
+	struct cdev			chrdev;
+#define IIO_MAX_GROUPS 6
+	const struct attribute_group	*groups[IIO_MAX_GROUPS + 1];
+	int				groupcounter;
+
+	unsigned long			flags;
+#if defined(CONFIG_DEBUG_FS)
+	struct dentry			*debugfs_dentry;
+	unsigned			cached_reg_addr;
+#endif
+};
+
+const struct iio_chan_spec
+*iio_find_channel_from_si(struct iio_dev *indio_dev, int si);
+int iio_device_register(struct iio_dev *indio_dev);
+void iio_device_unregister(struct iio_dev *indio_dev);
+int devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev);
+void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
+int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
+
+extern struct bus_type iio_bus_type;
+
+/**
+ * iio_device_put() - reference counted deallocation of struct device
+ * @indio_dev: 		IIO device structure containing the device
+ **/
+static inline void iio_device_put(struct iio_dev *indio_dev)
+{
+	if (indio_dev)
+		put_device(&indio_dev->dev);
+}
+
+/**
+ * dev_to_iio_dev() - Get IIO device struct from a device struct
+ * @dev: 		The device embedded in the IIO device
+ *
+ * Note: The device must be a IIO device, otherwise the result is undefined.
+ */
+static inline struct iio_dev *dev_to_iio_dev(struct device *dev)
+{
+	return container_of(dev, struct iio_dev, dev);
+}
+
+/**
+ * iio_device_get() - increment reference count for the device
+ * @indio_dev: 		IIO device structure
+ *
+ * Returns: The passed IIO device
+ **/
+static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev)
+{
+	return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL;
+}
+
+
+/**
+ * iio_device_set_drvdata() - Set device driver data
+ * @indio_dev: IIO device structure
+ * @data: Driver specific data
+ *
+ * Allows to attach an arbitrary pointer to an IIO device, which can later be
+ * retrieved by iio_device_get_drvdata().
+ */
+static inline void iio_device_set_drvdata(struct iio_dev *indio_dev, void *data)
+{
+	dev_set_drvdata(&indio_dev->dev, data);
+}
+
+/**
+ * iio_device_get_drvdata() - Get device driver data
+ * @indio_dev: IIO device structure
+ *
+ * Returns the data previously set with iio_device_set_drvdata()
+ */
+static inline void *iio_device_get_drvdata(struct iio_dev *indio_dev)
+{
+	return dev_get_drvdata(&indio_dev->dev);
+}
+
+/* Can we make this smaller? */
+#define IIO_ALIGN L1_CACHE_BYTES
+struct iio_dev *iio_device_alloc(int sizeof_priv);
+
+static inline void *iio_priv(const struct iio_dev *indio_dev)
+{
+	return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN);
+}
+
+static inline struct iio_dev *iio_priv_to_dev(void *priv)
+{
+	return (struct iio_dev *)((char *)priv -
+				  ALIGN(sizeof(struct iio_dev), IIO_ALIGN));
+}
+
+void iio_device_free(struct iio_dev *indio_dev);
+struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv);
+void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev);
+struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
+						const char *fmt, ...);
+void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig);
+
+/**
+ * iio_buffer_enabled() - helper function to test if the buffer is enabled
+ * @indio_dev:		IIO device structure for device
+ **/
+static inline bool iio_buffer_enabled(struct iio_dev *indio_dev)
+{
+	return indio_dev->currentmode
+		& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE |
+		   INDIO_BUFFER_SOFTWARE);
+}
+
+/**
+ * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry
+ * @indio_dev:		IIO device structure for device
+ **/
+#if defined(CONFIG_DEBUG_FS)
+static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
+{
+	return indio_dev->debugfs_dentry;
+}
+#else
+static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
+{
+	return NULL;
+}
+#endif
+
+int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer,
+	int *fract);
+
+/**
+ * IIO_DEGREE_TO_RAD() - Convert degree to rad
+ * @deg: A value in degree
+ *
+ * Returns the given value converted from degree to rad
+ */
+#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL)
+
+/**
+ * IIO_G_TO_M_S_2() - Convert g to meter / second**2
+ * @g: A value in g
+ *
+ * Returns the given value converted from g to meter / second**2
+ */
+#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL)
+
+#endif /* _INDUSTRIAL_IO_H_ */
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
new file mode 100644
index 000000000..fa2d01ef8
--- /dev/null
+++ b/include/linux/iio/imu/adis.h
@@ -0,0 +1,283 @@
+/*
+ * Common library for ADIS16XXX devices
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __IIO_ADIS_H__
+#define __IIO_ADIS_H__
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/iio/types.h>
+
+#define ADIS_WRITE_REG(reg) ((0x80 | (reg)))
+#define ADIS_READ_REG(reg) ((reg) & 0x7f)
+
+#define ADIS_PAGE_SIZE 0x80
+#define ADIS_REG_PAGE_ID 0x00
+
+struct adis;
+
+/**
+ * struct adis_data - ADIS chip variant specific data
+ * @read_delay: SPI delay for read operations in us
+ * @write_delay: SPI delay for write operations in us
+ * @glob_cmd_reg: Register address of the GLOB_CMD register
+ * @msc_ctrl_reg: Register address of the MSC_CTRL register
+ * @diag_stat_reg: Register address of the DIAG_STAT register
+ * @status_error_msgs: Array of error messgaes
+ * @status_error_mask:
+ */
+struct adis_data {
+	unsigned int read_delay;
+	unsigned int write_delay;
+
+	unsigned int glob_cmd_reg;
+	unsigned int msc_ctrl_reg;
+	unsigned int diag_stat_reg;
+
+	unsigned int self_test_mask;
+	unsigned int startup_delay;
+
+	const char * const *status_error_msgs;
+	unsigned int status_error_mask;
+
+	int (*enable_irq)(struct adis *adis, bool enable);
+
+	bool has_paging;
+};
+
+struct adis {
+	struct spi_device	*spi;
+	struct iio_trigger	*trig;
+
+	const struct adis_data	*data;
+
+	struct mutex		txrx_lock;
+	struct spi_message	msg;
+	struct spi_transfer	*xfer;
+	unsigned int		current_page;
+	void			*buffer;
+
+	uint8_t			tx[10] ____cacheline_aligned;
+	uint8_t			rx[4];
+};
+
+int adis_init(struct adis *adis, struct iio_dev *indio_dev,
+	struct spi_device *spi, const struct adis_data *data);
+int adis_reset(struct adis *adis);
+
+int adis_write_reg(struct adis *adis, unsigned int reg,
+	unsigned int val, unsigned int size);
+int adis_read_reg(struct adis *adis, unsigned int reg,
+	unsigned int *val, unsigned int size);
+
+/**
+ * adis_write_reg_8() - Write single byte to a register
+ * @adis: The adis device
+ * @reg: The address of the register to be written
+ * @value: The value to write
+ */
+static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
+	uint8_t val)
+{
+	return adis_write_reg(adis, reg, val, 1);
+}
+
+/**
+ * adis_write_reg_16() - Write 2 bytes to a pair of registers
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: Value to be written
+ */
+static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
+	uint16_t val)
+{
+	return adis_write_reg(adis, reg, val, 2);
+}
+
+/**
+ * adis_write_reg_32() - write 4 bytes to four registers
+ * @adis: The adis device
+ * @reg: The address of the lower of the four register
+ * @value: Value to be written
+ */
+static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
+	uint32_t val)
+{
+	return adis_write_reg(adis, reg, val, 4);
+}
+
+/**
+ * adis_read_reg_16() - read 2 bytes from a 16-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
+	uint16_t *val)
+{
+	unsigned int tmp;
+	int ret;
+
+	ret = adis_read_reg(adis, reg, &tmp, 2);
+	*val = tmp;
+
+	return ret;
+}
+
+/**
+ * adis_read_reg_32() - read 4 bytes from a 32-bit register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
+	uint32_t *val)
+{
+	unsigned int tmp;
+	int ret;
+
+	ret = adis_read_reg(adis, reg, &tmp, 4);
+	*val = tmp;
+
+	return ret;
+}
+
+int adis_enable_irq(struct adis *adis, bool enable);
+int adis_check_status(struct adis *adis);
+
+int adis_initial_startup(struct adis *adis);
+
+int adis_single_conversion(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, unsigned int error_mask,
+	int *val);
+
+#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, info_all, bits) { \
+	.type = IIO_VOLTAGE, \
+	.indexed = 1, \
+	.channel = (chan), \
+	.extend_name = name, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = info_all, \
+	.address = (addr), \
+	.scan_index = (si), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS_SUPPLY_CHAN(addr, si, info_all, bits) \
+	ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", info_all, bits)
+
+#define ADIS_AUX_ADC_CHAN(addr, si, info_all, bits) \
+	ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, info_all, bits)
+
+#define ADIS_TEMP_CHAN(addr, si, info_all, bits) { \
+	.type = IIO_TEMP, \
+	.indexed = 1, \
+	.channel = 0, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_OFFSET), \
+	.info_mask_shared_by_all = info_all, \
+	.address = (addr), \
+	.scan_index = (si), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS_MOD_CHAN(_type, mod, addr, si, info_sep, info_all, bits) { \
+	.type = (_type), \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		 info_sep, \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = info_all, \
+	.address = (addr), \
+	.scan_index = (si), \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = (bits), \
+		.storagebits = 16, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define ADIS_ACCEL_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info_sep, info_all, bits)
+
+#define ADIS_GYRO_CHAN(mod, addr, si, info_sep, info_all, bits)		\
+	ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info_sep, info_all, bits)
+
+#define ADIS_INCLI_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info_sep, info_all, bits)
+
+#define ADIS_ROT_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info_sep, info_all, bits)
+
+#ifdef CONFIG_IIO_ADIS_LIB_BUFFER
+
+int adis_setup_buffer_and_trigger(struct adis *adis,
+	struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *));
+void adis_cleanup_buffer_and_trigger(struct adis *adis,
+	struct iio_dev *indio_dev);
+
+int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev);
+void adis_remove_trigger(struct adis *adis);
+
+int adis_update_scan_mode(struct iio_dev *indio_dev,
+	const unsigned long *scan_mask);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline int adis_setup_buffer_and_trigger(struct adis *adis,
+	struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *))
+{
+	return 0;
+}
+
+static inline void adis_cleanup_buffer_and_trigger(struct adis *adis,
+	struct iio_dev *indio_dev)
+{
+}
+
+static inline int adis_probe_trigger(struct adis *adis,
+	struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void adis_remove_trigger(struct adis *adis)
+{
+}
+
+#define adis_update_scan_mode NULL
+
+#endif /* CONFIG_IIO_BUFFER */
+
+#ifdef CONFIG_DEBUG_FS
+
+int adis_debugfs_reg_access(struct iio_dev *indio_dev,
+	unsigned int reg, unsigned int writeval, unsigned int *readval);
+
+#else
+
+#define adis_debugfs_reg_access NULL
+
+#endif
+
+#endif
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
new file mode 100644
index 000000000..1683bc710
--- /dev/null
+++ b/include/linux/iio/kfifo_buf.h
@@ -0,0 +1,14 @@
+#ifndef __LINUX_IIO_KFIFO_BUF_H__
+#define __LINUX_IIO_KFIFO_BUF_H__
+
+#include <linux/kfifo.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+
+struct iio_buffer *iio_kfifo_allocate(void);
+void iio_kfifo_free(struct iio_buffer *r);
+
+struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev);
+void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r);
+
+#endif
diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h
new file mode 100644
index 000000000..1601a2a63
--- /dev/null
+++ b/include/linux/iio/machine.h
@@ -0,0 +1,31 @@
+/*
+ * Industrial I/O in kernel access map definitions for board files.
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IIO_MACHINE_H__
+#define __LINUX_IIO_MACHINE_H__
+
+/**
+ * struct iio_map - description of link between consumer and device channels
+ * @adc_channel_label:	Label used to identify the channel on the provider.
+ *			This is matched against the datasheet_name element
+ *			of struct iio_chan_spec.
+ * @consumer_dev_name:	Name to uniquely identify the consumer device.
+ * @consumer_channel:	Unique name used to identify the channel on the
+ *			consumer side.
+ * @consumer_data:	Data about the channel for use by the consumer driver.
+ */
+struct iio_map {
+	const char *adc_channel_label;
+	const char *consumer_dev_name;
+	const char *consumer_channel;
+	void *consumer_data;
+};
+
+#endif
diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h
new file mode 100644
index 000000000..8a1d18640
--- /dev/null
+++ b/include/linux/iio/sysfs.h
@@ -0,0 +1,127 @@
+/* The industrial I/O core
+ *
+ *Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * General attributes
+ */
+
+#ifndef _INDUSTRIAL_IO_SYSFS_H_
+#define _INDUSTRIAL_IO_SYSFS_H_
+
+struct iio_chan_spec;
+
+/**
+ * struct iio_dev_attr - iio specific device attribute
+ * @dev_attr:	underlying device attribute
+ * @address:	associated register address
+ * @l:		list head for maintaining list of dynamically created attrs.
+ */
+struct iio_dev_attr {
+	struct device_attribute dev_attr;
+	u64 address;
+	struct list_head l;
+	struct iio_chan_spec const *c;
+};
+
+#define to_iio_dev_attr(_dev_attr)				\
+	container_of(_dev_attr, struct iio_dev_attr, dev_attr)
+
+ssize_t iio_read_const_attr(struct device *dev,
+			    struct device_attribute *attr,
+			    char *len);
+
+/**
+ * struct iio_const_attr - constant device specific attribute
+ *                         often used for things like available modes
+ * @string:	attribute string
+ * @dev_attr:	underlying device attribute
+ */
+struct iio_const_attr {
+	const char *string;
+	struct device_attribute dev_attr;
+};
+
+#define to_iio_const_attr(_dev_attr) \
+	container_of(_dev_attr, struct iio_const_attr, dev_attr)
+
+/* Some attributes will be hard coded (device dependent) and not require an
+   address, in these cases pass a negative */
+#define IIO_ATTR(_name, _mode, _show, _store, _addr)		\
+	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
+	  .address = _addr }
+
+#define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr)	\
+	struct iio_dev_attr iio_dev_attr_##_name		\
+	= IIO_ATTR(_name, _mode, _show, _store, _addr)
+
+#define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \
+	struct iio_dev_attr iio_dev_attr_##_vname			\
+	= IIO_ATTR(_name, _mode, _show, _store, _addr)
+
+#define IIO_CONST_ATTR(_name, _string)					\
+	struct iio_const_attr iio_const_attr_##_name			\
+	= { .string = _string,						\
+	    .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
+
+#define IIO_CONST_ATTR_NAMED(_vname, _name, _string)			\
+	struct iio_const_attr iio_const_attr_##_vname			\
+	= { .string = _string,						\
+	    .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
+
+/* Generic attributes of onetype or another */
+
+/**
+ * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency
+ * @_mode: sysfs file mode/permissions
+ * @_show: output method for the attribute
+ * @_store: input method for the attribute
+ **/
+#define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store)			\
+	IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0)
+
+/**
+ * IIO_DEV_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies
+ * @_show: output method for the attribute
+ *
+ * May be mode dependent on some devices
+ **/
+#define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show)				\
+	IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0)
+/**
+ * IIO_CONST_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies
+ * @_string: frequency string for the attribute
+ *
+ * Constant version
+ **/
+#define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string)			\
+	IIO_CONST_ATTR(sampling_frequency_available, _string)
+
+/**
+ * IIO_DEV_ATTR_INT_TIME_AVAIL - list available integration times
+ * @_show: output method for the attribute
+ **/
+#define IIO_DEV_ATTR_INT_TIME_AVAIL(_show)		\
+	IIO_DEVICE_ATTR(integration_time_available, S_IRUGO, _show, NULL, 0)
+/**
+ * IIO_CONST_ATTR_INT_TIME_AVAIL - list available integration times
+ * @_string: frequency string for the attribute
+ *
+ * Constant version
+ **/
+#define IIO_CONST_ATTR_INT_TIME_AVAIL(_string)		\
+	IIO_CONST_ATTR(integration_time_available, _string)
+
+#define IIO_DEV_ATTR_TEMP_RAW(_show)			\
+	IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0)
+
+#define IIO_CONST_ATTR_TEMP_OFFSET(_string)		\
+	IIO_CONST_ATTR(in_temp_offset, _string)
+
+#define IIO_CONST_ATTR_TEMP_SCALE(_string)		\
+	IIO_CONST_ATTR(in_temp_scale, _string)
+
+#endif /* _INDUSTRIAL_IO_SYSFS_H_ */
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
new file mode 100644
index 000000000..fa76c79a5
--- /dev/null
+++ b/include/linux/iio/trigger.h
@@ -0,0 +1,149 @@
+/* The industrial I/O core, trigger handling functions
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/atomic.h>
+
+#ifndef _IIO_TRIGGER_H_
+#define _IIO_TRIGGER_H_
+
+#ifdef CONFIG_IIO_TRIGGER
+struct iio_subirq {
+	bool enabled;
+};
+
+/**
+ * struct iio_trigger_ops - operations structure for an iio_trigger.
+ * @owner:		used to monitor usage count of the trigger.
+ * @set_trigger_state:	switch on/off the trigger on demand
+ * @try_reenable:	function to reenable the trigger when the
+ *			use count is zero (may be NULL)
+ * @validate_device:	function to validate the device when the
+ *			current trigger gets changed.
+ *
+ * This is typically static const within a driver and shared by
+ * instances of a given device.
+ **/
+struct iio_trigger_ops {
+	struct module *owner;
+	int (*set_trigger_state)(struct iio_trigger *trig, bool state);
+	int (*try_reenable)(struct iio_trigger *trig);
+	int (*validate_device)(struct iio_trigger *trig,
+			       struct iio_dev *indio_dev);
+};
+
+
+/**
+ * struct iio_trigger - industrial I/O trigger device
+ * @ops:		[DRIVER] operations structure
+ * @id:			[INTERN] unique id number
+ * @name:		[DRIVER] unique name
+ * @dev:		[DRIVER] associated device (if relevant)
+ * @list:		[INTERN] used in maintenance of global trigger list
+ * @alloc_list:		[DRIVER] used for driver specific trigger list
+ * @use_count:		use count for the trigger
+ * @subirq_chip:	[INTERN] associate 'virtual' irq chip.
+ * @subirq_base:	[INTERN] base number for irqs provided by trigger.
+ * @subirqs:		[INTERN] information about the 'child' irqs.
+ * @pool:		[INTERN] bitmap of irqs currently in use.
+ * @pool_lock:		[INTERN] protection of the irq pool.
+ **/
+struct iio_trigger {
+	const struct iio_trigger_ops	*ops;
+	int				id;
+	const char			*name;
+	struct device			dev;
+
+	struct list_head		list;
+	struct list_head		alloc_list;
+	atomic_t			use_count;
+
+	struct irq_chip			subirq_chip;
+	int				subirq_base;
+
+	struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER];
+	unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)];
+	struct mutex			pool_lock;
+};
+
+
+static inline struct iio_trigger *to_iio_trigger(struct device *d)
+{
+	return container_of(d, struct iio_trigger, dev);
+}
+
+static inline void iio_trigger_put(struct iio_trigger *trig)
+{
+	module_put(trig->ops->owner);
+	put_device(&trig->dev);
+}
+
+static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig)
+{
+	get_device(&trig->dev);
+	__module_get(trig->ops->owner);
+
+	return trig;
+}
+
+/**
+ * iio_device_set_drvdata() - Set trigger driver data
+ * @trig: IIO trigger structure
+ * @data: Driver specific data
+ *
+ * Allows to attach an arbitrary pointer to an IIO trigger, which can later be
+ * retrieved by iio_trigger_get_drvdata().
+ */
+static inline void iio_trigger_set_drvdata(struct iio_trigger *trig, void *data)
+{
+	dev_set_drvdata(&trig->dev, data);
+}
+
+/**
+ * iio_trigger_get_drvdata() - Get trigger driver data
+ * @trig: IIO trigger structure
+ *
+ * Returns the data previously set with iio_trigger_set_drvdata()
+ */
+static inline void *iio_trigger_get_drvdata(struct iio_trigger *trig)
+{
+	return dev_get_drvdata(&trig->dev);
+}
+
+/**
+ * iio_trigger_register() - register a trigger with the IIO core
+ * @trig_info:	trigger to be registered
+ **/
+int iio_trigger_register(struct iio_trigger *trig_info);
+
+/**
+ * iio_trigger_unregister() - unregister a trigger from the core
+ * @trig_info:	trigger to be unregistered
+ **/
+void iio_trigger_unregister(struct iio_trigger *trig_info);
+
+/**
+ * iio_trigger_poll() - called on a trigger occurring
+ * @trig:	trigger which occurred
+ *
+ * Typically called in relevant hardware interrupt handler.
+ **/
+void iio_trigger_poll(struct iio_trigger *trig);
+void iio_trigger_poll_chained(struct iio_trigger *trig);
+
+irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private);
+
+__printf(1, 2) struct iio_trigger *iio_trigger_alloc(const char *fmt, ...);
+void iio_trigger_free(struct iio_trigger *trig);
+
+#else
+struct iio_trigger;
+struct iio_trigger_ops;
+#endif
+#endif /* _IIO_TRIGGER_H_ */
diff --git a/include/linux/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h
new file mode 100644
index 000000000..c4f8c7409
--- /dev/null
+++ b/include/linux/iio/trigger_consumer.h
@@ -0,0 +1,63 @@
+/* The industrial I/O core, trigger consumer functions
+ *
+ * Copyright (c) 2008-2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IIO_TRIGGER_CONSUMER_H__
+#define __LINUX_IIO_TRIGGER_CONSUMER_H__
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+struct iio_dev;
+struct iio_trigger;
+
+/**
+ * struct iio_poll_func - poll function pair
+ *
+ * @indio_dev:			data specific to device (passed into poll func)
+ * @h:				the function that is actually run on trigger
+ * @thread:			threaded interrupt part
+ * @type:			the type of interrupt (basically if oneshot)
+ * @name:			name used to identify the trigger consumer.
+ * @irq:			the corresponding irq as allocated from the
+ *				trigger pool
+ * @timestamp:			some devices need a timestamp grabbed as soon
+ *				as possible after the trigger - hence handler
+ *				passes it via here.
+ **/
+struct iio_poll_func {
+	struct iio_dev *indio_dev;
+	irqreturn_t (*h)(int irq, void *p);
+	irqreturn_t (*thread)(int irq, void *p);
+	int type;
+	char *name;
+	int irq;
+	s64 timestamp;
+};
+
+
+struct iio_poll_func
+*iio_alloc_pollfunc(irqreturn_t (*h)(int irq, void *p),
+		    irqreturn_t (*thread)(int irq, void *p),
+		    int type,
+		    struct iio_dev *indio_dev,
+		    const char *fmt,
+		    ...);
+void iio_dealloc_pollfunc(struct iio_poll_func *pf);
+irqreturn_t iio_pollfunc_store_time(int irq, void *p);
+
+void iio_trigger_notify_done(struct iio_trigger *trig);
+
+/*
+ * Two functions for common case where all that happens is a pollfunc
+ * is attached and detached from a trigger
+ */
+int iio_triggered_buffer_postenable(struct iio_dev *indio_dev);
+int iio_triggered_buffer_predisable(struct iio_dev *indio_dev);
+
+#endif
diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h
new file mode 100644
index 000000000..c378ebec6
--- /dev/null
+++ b/include/linux/iio/triggered_buffer.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_
+#define _LINUX_IIO_TRIGGERED_BUFFER_H_
+
+#include <linux/interrupt.h>
+
+struct iio_dev;
+struct iio_buffer_setup_ops;
+
+int iio_triggered_buffer_setup(struct iio_dev *indio_dev,
+	irqreturn_t (*pollfunc_bh)(int irq, void *p),
+	irqreturn_t (*pollfunc_th)(int irq, void *p),
+	const struct iio_buffer_setup_ops *setup_ops);
+void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev);
+
+#endif
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
new file mode 100644
index 000000000..942b6de68
--- /dev/null
+++ b/include/linux/iio/types.h
@@ -0,0 +1,30 @@
+/* industrial I/O data types needed both in and out of kernel
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_TYPES_H_
+#define _IIO_TYPES_H_
+
+#include <uapi/linux/iio/types.h>
+
+enum iio_event_info {
+	IIO_EV_INFO_ENABLE,
+	IIO_EV_INFO_VALUE,
+	IIO_EV_INFO_HYSTERESIS,
+	IIO_EV_INFO_PERIOD,
+};
+
+#define IIO_VAL_INT 1
+#define IIO_VAL_INT_PLUS_MICRO 2
+#define IIO_VAL_INT_PLUS_NANO 3
+#define IIO_VAL_INT_PLUS_MICRO_DB 4
+#define IIO_VAL_INT_MULTIPLE 5
+#define IIO_VAL_FRACTIONAL 10
+#define IIO_VAL_FRACTIONAL_LOG2 11
+
+#endif /* _IIO_TYPES_H_ */