Initial import

1 files changed, 93 insertions, 0 deletions

diff --git a/include/linux/ioc3.h b/include/linux/ioc3.h
new file mode 100644
index 000000000..38b286e9a
--- /dev/null
+++ b/include/linux/ioc3.h
@@ -0,0 +1,93 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
+ */
+
+#ifndef _LINUX_IOC3_H
+#define _LINUX_IOC3_H
+
+#include <asm/sn/ioc3.h>
+
+#define IOC3_MAX_SUBMODULES	32
+
+#define IOC3_CLASS_NONE		0
+#define IOC3_CLASS_BASE_IP27	1
+#define IOC3_CLASS_BASE_IP30	2
+#define IOC3_CLASS_MENET_123	3
+#define IOC3_CLASS_MENET_4	4
+#define IOC3_CLASS_CADDUO	5
+#define IOC3_CLASS_SERIAL	6
+
+/* One of these per IOC3 */
+struct ioc3_driver_data {
+	struct list_head list;
+	int id;				/* IOC3 sequence number */
+	/* PCI mapping */
+	unsigned long pma;		/* physical address */
+	struct ioc3 __iomem *vma;	/* pointer to registers */
+	struct pci_dev *pdev;		/* PCI device */
+	/* IRQ stuff */
+	int dual_irq;			/* set if separate IRQs are used */
+	int irq_io, irq_eth;		/* IRQ numbers */
+	/* GPIO magic */
+	spinlock_t gpio_lock;
+	unsigned int gpdr_shadow;
+	/* NIC identifiers */
+	char nic_part[32];
+	char nic_serial[16];
+	char nic_mac[6];
+	/* submodule set */
+	int class;
+	void *data[IOC3_MAX_SUBMODULES];	/* for submodule use */
+	int active[IOC3_MAX_SUBMODULES];	/* set if probe succeeds */
+	/* is_ir_lock must be held while
+	 * modifying sio_ie values, so
+	 * we can be sure that sio_ie is
+	 * not changing when we read it
+	 * along with sio_ir.
+	 */
+	spinlock_t ir_lock;	/* SIO_IE[SC] mod lock */
+};
+
+/* One per submodule */
+struct ioc3_submodule {
+	char *name;		/* descriptive submodule name */
+	struct module *owner;	/* owning kernel module */
+	int ethernet;		/* set for ethernet drivers */
+	int (*probe) (struct ioc3_submodule *, struct ioc3_driver_data *);
+	int (*remove) (struct ioc3_submodule *, struct ioc3_driver_data *);
+	int id;			/* assigned by IOC3, index for the "data" array */
+	/* IRQ stuff */
+	unsigned int irq_mask;	/* IOC3 IRQ mask, leave clear for Ethernet */
+	int reset_mask;		/* non-zero if you want the ioc3.c module to reset interrupts */
+	int (*intr) (struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+	/* private submodule data */
+	void *data;		/* assigned by submodule */
+};
+
+/**********************************
+ * Functions needed by submodules *
+ **********************************/
+
+#define IOC3_W_IES		0
+#define IOC3_W_IEC		1
+
+/* registers a submodule for all existing and future IOC3 chips */
+extern int ioc3_register_submodule(struct ioc3_submodule *);
+/* unregisters a submodule */
+extern void ioc3_unregister_submodule(struct ioc3_submodule *);
+/* enables IRQs indicated by irq_mask for a specified IOC3 chip */
+extern void ioc3_enable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* ackowledges specified IRQs */
+extern void ioc3_ack(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* disables IRQs indicated by irq_mask for a specified IOC3 chip */
+extern void ioc3_disable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* atomically sets GPCR bits */
+extern void ioc3_gpcr_set(struct ioc3_driver_data *, unsigned int);
+/* general ireg writer */
+extern void ioc3_write_ireg(struct ioc3_driver_data *idd, uint32_t value, int reg);
+
+#endif