Linux-libre 4.5-gnu

7 files changed, 106 insertions, 30 deletions

diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 366cf7795..58f3ba709 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -142,7 +142,9 @@
 #endif
 
 #ifndef map_bankwidth
+#ifdef CONFIG_MTD
 #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
+#endif
 static inline int map_bankwidth(void *map)
 {
 	BUG();
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index f17fa7580..cc8492301 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -254,6 +254,17 @@ struct mtd_info {
 	int usecount;
 };
 
+static inline void mtd_set_of_node(struct mtd_info *mtd,
+				   struct device_node *np)
+{
+	mtd->dev.of_node = np;
+}
+
+static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
+{
+	return mtd->dev.of_node;
+}
+
 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	      void **virt, resource_size_t *phys);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 5a9d1d4c2..bdd68e22b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -129,6 +129,14 @@ typedef enum {
 /* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
+/*
+ * Enable generic NAND 'page erased' check. This check is only done when
+ * ecc.correct() returns -EBADMSG.
+ * Set this flag if your implementation does not fix bitflips in erased
+ * pages and you want to rely on the default implementation.
+ */
+#define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
+
 /* Bit mask for flags passed to do_nand_read_ecc */
 #define NAND_GET_DEVICE		0x80
 
@@ -276,15 +284,15 @@ struct nand_onfi_params {
 	__le16 t_r;
 	__le16 t_ccs;
 	__le16 src_sync_timing_mode;
-	__le16 src_ssync_features;
+	u8 src_ssync_features;
 	__le16 clk_pin_capacitance_typ;
 	__le16 io_pin_capacitance_typ;
 	__le16 input_pin_capacitance_typ;
 	u8 input_pin_capacitance_max;
 	u8 driver_strength_support;
 	__le16 t_int_r;
-	__le16 t_ald;
-	u8 reserved4[7];
+	__le16 t_adl;
+	u8 reserved4[8];
 
 	/* vendor */
 	__le16 vendor_revision;
@@ -407,7 +415,7 @@ struct nand_jedec_params {
 	__le16 input_pin_capacitance_typ;
 	__le16 clk_pin_capacitance_typ;
 	u8 driver_strength_support;
-	__le16 t_ald;
+	__le16 t_adl;
 	u8 reserved4[36];
 
 	/* ECC and endurance block */
@@ -451,12 +459,19 @@ struct nand_hw_control {
  * @total:	total number of ECC bytes per page
  * @prepad:	padding information for syndrome based ECC generators
  * @postpad:	padding information for syndrome based ECC generators
+ * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
  * @layout:	ECC layout control struct pointer
  * @priv:	pointer to private ECC control data
  * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
  * @calculate:	function for ECC calculation or readback from ECC hardware
- * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw).
+ *		Should return a positive number representing the number of
+ *		corrected bitflips, -EBADMSG if the number of bitflips exceed
+ *		ECC strength, or any other error code if the error is not
+ *		directly related to correction.
+ *		If -EBADMSG is returned the input buffers should be left
+ *		untouched.
  * @read_page_raw:	function to read a raw page without ECC. This function
  *			should hide the specific layout used by the ECC
  *			controller and always return contiguous in-band and
@@ -494,6 +509,7 @@ struct nand_ecc_ctrl {
 	int strength;
 	int prepad;
 	int postpad;
+	unsigned int options;
 	struct nand_ecclayout	*layout;
 	void *priv;
 	void (*hwctl)(struct mtd_info *mtd, int mode);
@@ -540,11 +556,11 @@ struct nand_buffers {
 
 /**
  * struct nand_chip - NAND Private Flash Chip Data
+ * @mtd:		MTD device registered to the MTD framework
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
  *			flash device
  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
  *			flash device.
- * @flash_node:		[BOARDSPECIFIC] device node describing this instance
  * @read_byte:		[REPLACEABLE] read one byte from the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
  * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
@@ -640,11 +656,10 @@ struct nand_buffers {
  */
 
 struct nand_chip {
+	struct mtd_info mtd;
 	void __iomem *IO_ADDR_R;
 	void __iomem *IO_ADDR_W;
 
-	struct device_node *flash_node;
-
 	uint8_t (*read_byte)(struct mtd_info *mtd);
 	u16 (*read_word)(struct mtd_info *mtd);
 	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
@@ -719,6 +734,37 @@ struct nand_chip {
 	void *priv;
 };
 
+static inline void nand_set_flash_node(struct nand_chip *chip,
+				       struct device_node *np)
+{
+	mtd_set_of_node(&chip->mtd, np);
+}
+
+static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
+{
+	return mtd_get_of_node(&chip->mtd);
+}
+
+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct nand_chip, mtd);
+}
+
+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
+{
+	return &chip->mtd;
+}
+
+static inline void *nand_get_controller_data(struct nand_chip *chip)
+{
+	return chip->priv;
+}
+
+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
+{
+	chip->priv = priv;
+}
+
 /*
  * NAND Flash Manufacturer ID Codes
  */
@@ -907,15 +953,6 @@ struct platform_nand_data {
 	struct platform_nand_ctrl ctrl;
 };
 
-/* Some helpers to access the data structures */
-static inline
-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	return chip->priv;
-}
-
 /* return the supported features. */
 static inline int onfi_feature(struct nand_chip *chip)
 {
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index 74acf5367..fb0bc3420 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -55,7 +55,7 @@ static inline int
 nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	return -1;
+	return -ENOTSUPP;
 }
 
 static inline struct nand_bch_control *
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 6a35e6de5..70736e1e6 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -41,7 +41,6 @@ struct mtd_partition {
 	uint64_t size;			/* partition size */
 	uint64_t offset;		/* offset within the master MTD space */
 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
-	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
 };
 
 #define MTDPART_OFS_RETAIN	(-3)
@@ -56,11 +55,9 @@ struct device_node;
 /**
  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
  * @origin: for RedBoot, start address of MTD device
- * @of_node: for OF parsers, device node containing partitioning information
  */
 struct mtd_part_parser_data {
 	unsigned long origin;
-	struct device_node *of_node;
 };
 
 
@@ -72,13 +69,33 @@ struct mtd_part_parser {
 	struct list_head list;
 	struct module *owner;
 	const char *name;
-	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
 			struct mtd_part_parser_data *);
+	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
 };
 
-extern void register_mtd_parser(struct mtd_part_parser *parser);
+/* Container for passing around a set of parsed partitions */
+struct mtd_partitions {
+	const struct mtd_partition *parts;
+	int nr_parts;
+	const struct mtd_part_parser *parser;
+};
+
+extern int __register_mtd_parser(struct mtd_part_parser *parser,
+				 struct module *owner);
+#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE)
+
 extern void deregister_mtd_parser(struct mtd_part_parser *parser);
 
+/*
+ * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't
+ * do anything special in module init/exit. Each driver may only use this macro
+ * once, and calling it replaces module_init() and module_exit().
+ */
+#define module_mtd_part_parser(__mtd_part_parser) \
+	module_driver(__mtd_part_parser, register_mtd_parser, \
+		      deregister_mtd_parser)
+
 int mtd_is_partition(const struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, const char *name,
 		      long long offset, long long length);
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 1c28f8879..2251add65 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -143,11 +143,11 @@ enum flctl_ecc_res_t {
 struct dma_chan;
 
 struct sh_flctl {
-	struct mtd_info		mtd;
 	struct nand_chip	chip;
 	struct platform_device	*pdev;
 	struct dev_pm_qos_request pm_qos;
 	void __iomem		*reg;
+	resource_size_t		fifo;
 
 	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
 	int	read_bytes;
@@ -186,7 +186,7 @@ struct sh_flctl_platform_data {
 
 static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
 {
-	return container_of(mtdinfo, struct sh_flctl, mtd);
+	return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
 }
 
 #endif	/* __SH_FLCTL_H__ */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index bc742dac7..62356d508 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -12,6 +12,7 @@
 
 #include <linux/bitops.h>
 #include <linux/mtd/cfi.h>
+#include <linux/mtd/mtd.h>
 
 /*
  * Manufacturer IDs
@@ -117,14 +118,11 @@ enum spi_nor_option_flags {
 	SNOR_F_USE_FSR		= BIT(0),
 };
 
-struct mtd_info;
-
 /**
  * struct spi_nor - Structure for defining a the SPI NOR layer
  * @mtd:		point to a mtd_info structure
  * @lock:		the lock for the read/write/erase/lock/unlock operations
  * @dev:		point to a spi device, or a spi nor controller device.
- * @flash_node:		point to a device node describing this flash instance.
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
@@ -144,7 +142,8 @@ struct mtd_info;
  * @read:		[DRIVER-SPECIFIC] read data from the SPI NOR
  * @write:		[DRIVER-SPECIFIC] write data to the SPI NOR
  * @erase:		[DRIVER-SPECIFIC] erase a sector of the SPI NOR
- *			at the offset @offs
+ *			at the offset @offs; if not provided by the driver,
+ *			spi-nor will send the erase opcode via write_reg()
  * @flash_lock:		[FLASH-SPECIFIC] lock a region of the SPI NOR
  * @flash_unlock:	[FLASH-SPECIFIC] unlock a region of the SPI NOR
  * @flash_is_locked:	[FLASH-SPECIFIC] check if a region of the SPI NOR is
@@ -155,7 +154,6 @@ struct spi_nor {
 	struct mtd_info		mtd;
 	struct mutex		lock;
 	struct device		*dev;
-	struct device_node	*flash_node;
 	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;
@@ -185,6 +183,17 @@ struct spi_nor {
 	void *priv;
 };
 
+static inline void spi_nor_set_flash_node(struct spi_nor *nor,
+					  struct device_node *np)
+{
+	mtd_set_of_node(&nor->mtd, np);
+}
+
+static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
+{
+	return mtd_get_of_node(&nor->mtd);
+}
+
 /**
  * spi_nor_scan() - scan the SPI NOR
  * @nor:	the spi_nor structure