summaryrefslogtreecommitdiff
path: root/include/linux/mtd
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
commitb4b7ff4b08e691656c9d77c758fc355833128ac0 (patch)
tree82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /include/linux/mtd
parent35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff)
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'include/linux/mtd')
-rw-r--r--include/linux/mtd/nand.h21
-rw-r--r--include/linux/mtd/spi-nor.h88
2 files changed, 48 insertions, 61 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 272f42952..5a9d1d4c2 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -504,16 +504,16 @@ struct nand_ecc_ctrl {
int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required);
+ const uint8_t *buf, int oob_required, int page);
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offs, uint32_t len, uint8_t *buf, int page);
int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, uint32_t data_len,
- const uint8_t *data_buf, int oob_required);
+ const uint8_t *data_buf, int oob_required, int page);
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required);
+ const uint8_t *buf, int oob_required, int page);
int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -544,7 +544,7 @@ struct nand_buffers {
* flash device
* @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
* flash device.
- * @dn: [BOARDSPECIFIC] device node describing this instance
+ * @flash_node: [BOARDSPECIFIC] device node describing this instance
* @read_byte: [REPLACEABLE] read one byte from the chip
* @read_word: [REPLACEABLE] read one word from the chip
* @write_byte: [REPLACEABLE] write a single byte to the chip on the
@@ -556,10 +556,6 @@ struct nand_buffers {
* @block_markbad: [REPLACEABLE] mark a block bad
* @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
* ALE/CLE/nCE. Also used to write command and address
- * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting
- * mtd->oobsize, mtd->writesize and so on.
- * @id_data contains the 8 bytes values of NAND_CMD_READID.
- * Return with the bus width.
* @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
@@ -647,7 +643,7 @@ struct nand_chip {
void __iomem *IO_ADDR_R;
void __iomem *IO_ADDR_W;
- struct device_node *dn;
+ struct device_node *flash_node;
uint8_t (*read_byte)(struct mtd_info *mtd);
u16 (*read_word)(struct mtd_info *mtd);
@@ -658,8 +654,6 @@ struct nand_chip {
int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
- u8 *id_data);
int (*dev_ready)(struct mtd_info *mtd);
void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
int page_addr);
@@ -1030,4 +1024,9 @@ struct nand_sdr_timings {
/* get timing characteristics from ONFI timing mode. */
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+ void *ecc, int ecclen,
+ void *extraoob, int extraooblen,
+ int threshold);
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index e5409524b..bc742dac7 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -10,6 +10,23 @@
#ifndef __LINUX_MTD_SPI_NOR_H
#define __LINUX_MTD_SPI_NOR_H
+#include <linux/bitops.h>
+#include <linux/mtd/cfi.h>
+
+/*
+ * Manufacturer IDs
+ *
+ * The first byte returned from the flash after sending opcode SPINOR_OP_RDID.
+ * Sometimes these are the same as CFI IDs, but sometimes they aren't.
+ */
+#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
+#define SNOR_MFR_INTEL CFI_MFR_INTEL
+#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */
+#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
+#define SNOR_MFR_SPANSION CFI_MFR_AMD
+#define SNOR_MFR_SST CFI_MFR_SST
+#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */
+
/*
* Note on opcode nomenclature: some opcodes have a format like
* SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
@@ -61,24 +78,24 @@
#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
/* Status Register bits. */
-#define SR_WIP 1 /* Write in progress */
-#define SR_WEL 2 /* Write enable latch */
+#define SR_WIP BIT(0) /* Write in progress */
+#define SR_WEL BIT(1) /* Write enable latch */
/* meaning of other SR_* bits may differ between vendors */
-#define SR_BP0 4 /* Block protect 0 */
-#define SR_BP1 8 /* Block protect 1 */
-#define SR_BP2 0x10 /* Block protect 2 */
-#define SR_SRWD 0x80 /* SR write protect */
+#define SR_BP0 BIT(2) /* Block protect 0 */
+#define SR_BP1 BIT(3) /* Block protect 1 */
+#define SR_BP2 BIT(4) /* Block protect 2 */
+#define SR_SRWD BIT(7) /* SR write protect */
-#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
+#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
/* Enhanced Volatile Configuration Register bits */
-#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
+#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
/* Flag Status Register bits */
-#define FSR_READY 0x80
+#define FSR_READY BIT(7)
/* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */
+#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
enum read_mode {
SPI_NOR_NORMAL = 0,
@@ -87,33 +104,6 @@ enum read_mode {
SPI_NOR_QUAD,
};
-/**
- * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer
- * @wren: command for "Write Enable", or 0x00 for not required
- * @cmd: command for operation
- * @cmd_pins: number of pins to send @cmd (1, 2, 4)
- * @addr: address for operation
- * @addr_pins: number of pins to send @addr (1, 2, 4)
- * @addr_width: number of address bytes
- * (3,4, or 0 for address not required)
- * @mode: mode data
- * @mode_pins: number of pins to send @mode (1, 2, 4)
- * @mode_cycles: number of mode cycles (0 for mode not required)
- * @dummy_cycles: number of dummy cycles (0 for dummy not required)
- */
-struct spi_nor_xfer_cfg {
- u8 wren;
- u8 cmd;
- u8 cmd_pins;
- u32 addr;
- u8 addr_pins;
- u8 addr_width;
- u8 mode;
- u8 mode_pins;
- u8 mode_cycles;
- u8 dummy_cycles;
-};
-
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -127,11 +117,14 @@ enum spi_nor_option_flags {
SNOR_F_USE_FSR = BIT(0),
};
+struct mtd_info;
+
/**
* struct spi_nor - Structure for defining a the SPI NOR layer
* @mtd: point to a mtd_info structure
* @lock: the lock for the read/write/erase/lock/unlock operations
* @dev: point to a spi device, or a spi nor controller device.
+ * @flash_node: point to a device node describing this flash instance.
* @page_size: the page size of the SPI NOR
* @addr_width: number of address bytes
* @erase_opcode: the opcode for erasing a sector
@@ -141,28 +134,28 @@ enum spi_nor_option_flags {
* @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
- * @cfg: used by the read_xfer/write_xfer
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
* @unprepare: [OPTIONAL] do some post work after the
* read/write/erase/lock/unlock operations
- * @read_xfer: [OPTIONAL] the read fundamental primitive
- * @write_xfer: [OPTIONAL] the writefundamental primitive
* @read_reg: [DRIVER-SPECIFIC] read out the register
* @write_reg: [DRIVER-SPECIFIC] write data to the register
* @read: [DRIVER-SPECIFIC] read data from the SPI NOR
* @write: [DRIVER-SPECIFIC] write data to the SPI NOR
* @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
* at the offset @offs
- * @lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
- * @unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
+ * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
+ * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
+ * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
+ * completely locked
* @priv: the private data
*/
struct spi_nor {
- struct mtd_info *mtd;
+ struct mtd_info mtd;
struct mutex lock;
struct device *dev;
+ struct device_node *flash_node;
u32 page_size;
u8 addr_width;
u8 erase_opcode;
@@ -172,18 +165,12 @@ struct spi_nor {
enum read_mode flash_read;
bool sst_write_second;
u32 flags;
- struct spi_nor_xfer_cfg cfg;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
- int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
- u8 *buf, size_t len);
- int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
- u8 *buf, size_t len);
int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
- int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
- int write_enable);
+ int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
int (*read)(struct spi_nor *nor, loff_t from,
size_t len, size_t *retlen, u_char *read_buf);
@@ -193,6 +180,7 @@ struct spi_nor {
int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+ int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
void *priv;
};