Initial import

1 files changed, 24 insertions, 0 deletions

diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
new file mode 100644
index 000000000..b5919f8e6
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -0,0 +1,24 @@
+/*
+ * Standard pin control state definitions
+ */
+
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ *	into as default, usually this means the pins are up and ready to
+ *	be used by the device driver. This state is commonly used by
+ *	hogs to configure muxing and pins at boot, and also as a state
+ *	to go into when returning from sleep and idle in
+ *	.pm_runtime_resume() or ordinary .resume() for example.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ *	when the pins are idle. This is a state where the system is relaxed
+ *	but not fully sleeping - some power may be on but clocks gated for
+ *	example. Could typically be set from a pm_runtime_suspend() or
+ *	pm_runtime_idle() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ *	when the pins are sleeping. This is a state where the system is in
+ *	its lowest sleep state. Could typically be set from an
+ *	ordinary .suspend() function.
+ */
+#define PINCTRL_STATE_DEFAULT "default"
+#define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"