Initial import

8 files changed, 999 insertions, 0 deletions

diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
new file mode 100644
index 000000000..18eccefea
--- /dev/null
+++ b/include/linux/pinctrl/consumer.h
@@ -0,0 +1,195 @@
+/*
+ * Consumer interface the pin control subsystem
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_CONSUMER_H
+#define __LINUX_PINCTRL_CONSUMER_H
+
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/pinctrl/pinctrl-state.h>
+
+/* This struct is private to the core and should be regarded as a cookie */
+struct pinctrl;
+struct pinctrl_state;
+struct device;
+
+#ifdef CONFIG_PINCTRL
+
+/* External interface to pin control */
+extern int pinctrl_request_gpio(unsigned gpio);
+extern void pinctrl_free_gpio(unsigned gpio);
+extern int pinctrl_gpio_direction_input(unsigned gpio);
+extern int pinctrl_gpio_direction_output(unsigned gpio);
+
+extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
+extern void pinctrl_put(struct pinctrl *p);
+extern struct pinctrl_state * __must_check pinctrl_lookup_state(
+							struct pinctrl *p,
+							const char *name);
+extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
+
+extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
+extern void devm_pinctrl_put(struct pinctrl *p);
+
+#ifdef CONFIG_PM
+extern int pinctrl_pm_select_default_state(struct device *dev);
+extern int pinctrl_pm_select_sleep_state(struct device *dev);
+extern int pinctrl_pm_select_idle_state(struct device *dev);
+#else
+static inline int pinctrl_pm_select_default_state(struct device *dev)
+{
+	return 0;
+}
+static inline int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	return 0;
+}
+static inline int pinctrl_pm_select_idle_state(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+#else /* !CONFIG_PINCTRL */
+
+static inline int pinctrl_request_gpio(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void pinctrl_free_gpio(unsigned gpio)
+{
+}
+
+static inline int pinctrl_gpio_direction_input(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int pinctrl_gpio_direction_output(unsigned gpio)
+{
+	return 0;
+}
+
+static inline struct pinctrl * __must_check pinctrl_get(struct device *dev)
+{
+	return NULL;
+}
+
+static inline void pinctrl_put(struct pinctrl *p)
+{
+}
+
+static inline struct pinctrl_state * __must_check pinctrl_lookup_state(
+							struct pinctrl *p,
+							const char *name)
+{
+	return NULL;
+}
+
+static inline int pinctrl_select_state(struct pinctrl *p,
+				       struct pinctrl_state *s)
+{
+	return 0;
+}
+
+static inline struct pinctrl * __must_check devm_pinctrl_get(struct device *dev)
+{
+	return NULL;
+}
+
+static inline void devm_pinctrl_put(struct pinctrl *p)
+{
+}
+
+static inline int pinctrl_pm_select_default_state(struct device *dev)
+{
+	return 0;
+}
+
+static inline int pinctrl_pm_select_sleep_state(struct device *dev)
+{
+	return 0;
+}
+
+static inline int pinctrl_pm_select_idle_state(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PINCTRL */
+
+static inline struct pinctrl * __must_check pinctrl_get_select(
+					struct device *dev, const char *name)
+{
+	struct pinctrl *p;
+	struct pinctrl_state *s;
+	int ret;
+
+	p = pinctrl_get(dev);
+	if (IS_ERR(p))
+		return p;
+
+	s = pinctrl_lookup_state(p, name);
+	if (IS_ERR(s)) {
+		pinctrl_put(p);
+		return ERR_PTR(PTR_ERR(s));
+	}
+
+	ret = pinctrl_select_state(p, s);
+	if (ret < 0) {
+		pinctrl_put(p);
+		return ERR_PTR(ret);
+	}
+
+	return p;
+}
+
+static inline struct pinctrl * __must_check pinctrl_get_select_default(
+					struct device *dev)
+{
+	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
+}
+
+static inline struct pinctrl * __must_check devm_pinctrl_get_select(
+					struct device *dev, const char *name)
+{
+	struct pinctrl *p;
+	struct pinctrl_state *s;
+	int ret;
+
+	p = devm_pinctrl_get(dev);
+	if (IS_ERR(p))
+		return p;
+
+	s = pinctrl_lookup_state(p, name);
+	if (IS_ERR(s)) {
+		devm_pinctrl_put(p);
+		return ERR_CAST(s);
+	}
+
+	ret = pinctrl_select_state(p, s);
+	if (ret < 0) {
+		devm_pinctrl_put(p);
+		return ERR_PTR(ret);
+	}
+
+	return p;
+}
+
+static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
+					struct device *dev)
+{
+	return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
+}
+
+#endif /* __LINUX_PINCTRL_CONSUMER_H */
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
new file mode 100644
index 000000000..281cb91dd
--- /dev/null
+++ b/include/linux/pinctrl/devinfo.h
@@ -0,0 +1,49 @@
+/*
+ * Per-device information from the pin control system.
+ * This is the stuff that get included into the device
+ * core.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef PINCTRL_DEVINFO_H
+#define PINCTRL_DEVINFO_H
+
+#ifdef CONFIG_PINCTRL
+
+/* The device core acts as a consumer toward pinctrl */
+#include <linux/pinctrl/consumer.h>
+
+/**
+ * struct dev_pin_info - pin state container for devices
+ * @p: pinctrl handle for the containing device
+ * @default_state: the default state for the handle, if found
+ */
+struct dev_pin_info {
+	struct pinctrl *p;
+	struct pinctrl_state *default_state;
+#ifdef CONFIG_PM
+	struct pinctrl_state *sleep_state;
+	struct pinctrl_state *idle_state;
+#endif
+};
+
+extern int pinctrl_bind_pins(struct device *dev);
+
+#else
+
+/* Stubs if we're not using pinctrl */
+
+static inline int pinctrl_bind_pins(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PINCTRL */
+#endif /* PINCTRL_DEVINFO_H */
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
new file mode 100644
index 000000000..e5b1716f9
--- /dev/null
+++ b/include/linux/pinctrl/machine.h
@@ -0,0 +1,170 @@
+/*
+ * Machine interface for the pinctrl subsystem.
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_MACHINE_H
+#define __LINUX_PINCTRL_MACHINE_H
+
+#include <linux/bug.h>
+
+#include <linux/pinctrl/pinctrl-state.h>
+
+enum pinctrl_map_type {
+	PIN_MAP_TYPE_INVALID,
+	PIN_MAP_TYPE_DUMMY_STATE,
+	PIN_MAP_TYPE_MUX_GROUP,
+	PIN_MAP_TYPE_CONFIGS_PIN,
+	PIN_MAP_TYPE_CONFIGS_GROUP,
+};
+
+/**
+ * struct pinctrl_map_mux - mapping table content for MAP_TYPE_MUX_GROUP
+ * @group: the name of the group whose mux function is to be configured. This
+ *	field may be left NULL, and the first applicable group for the function
+ *	will be used.
+ * @function: the mux function to select for the group
+ */
+struct pinctrl_map_mux {
+	const char *group;
+	const char *function;
+};
+
+/**
+ * struct pinctrl_map_configs - mapping table content for MAP_TYPE_CONFIGS_*
+ * @group_or_pin: the name of the pin or group whose configuration parameters
+ *	are to be configured.
+ * @configs: a pointer to an array of config parameters/values to program into
+ *	hardware. Each individual pin controller defines the format and meaning
+ *	of config parameters.
+ * @num_configs: the number of entries in array @configs
+ */
+struct pinctrl_map_configs {
+	const char *group_or_pin;
+	unsigned long *configs;
+	unsigned num_configs;
+};
+
+/**
+ * struct pinctrl_map - boards/machines shall provide this map for devices
+ * @dev_name: the name of the device using this specific mapping, the name
+ *	must be the same as in your struct device*. If this name is set to the
+ *	same name as the pin controllers own dev_name(), the map entry will be
+ *	hogged by the driver itself upon registration
+ * @name: the name of this specific map entry for the particular machine.
+ *	This is the parameter passed to pinmux_lookup_state()
+ * @type: the type of mapping table entry
+ * @ctrl_dev_name: the name of the device controlling this specific mapping,
+ *	the name must be the same as in your struct device*. This field is not
+ *	used for PIN_MAP_TYPE_DUMMY_STATE
+ * @data: Data specific to the mapping type
+ */
+struct pinctrl_map {
+	const char *dev_name;
+	const char *name;
+	enum pinctrl_map_type type;
+	const char *ctrl_dev_name;
+	union {
+		struct pinctrl_map_mux mux;
+		struct pinctrl_map_configs configs;
+	} data;
+};
+
+/* Convenience macros to create mapping table entries */
+
+#define PIN_MAP_DUMMY_STATE(dev, state) \
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_DUMMY_STATE,			\
+	}
+
+#define PIN_MAP_MUX_GROUP(dev, state, pinctrl, grp, func)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_MUX_GROUP,				\
+		.ctrl_dev_name = pinctrl,				\
+		.data.mux = {						\
+			.group = grp,					\
+			.function = func,				\
+		},							\
+	}
+
+#define PIN_MAP_MUX_GROUP_DEFAULT(dev, pinctrl, grp, func)		\
+	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, func)
+
+#define PIN_MAP_MUX_GROUP_HOG(dev, state, grp, func)			\
+	PIN_MAP_MUX_GROUP(dev, state, dev, grp, func)
+
+#define PIN_MAP_MUX_GROUP_HOG_DEFAULT(dev, grp, func)			\
+	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, func)
+
+#define PIN_MAP_CONFIGS_PIN(dev, state, pinctrl, pin, cfgs)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_CONFIGS_PIN,			\
+		.ctrl_dev_name = pinctrl,				\
+		.data.configs = {					\
+			.group_or_pin = pin,				\
+			.configs = cfgs,				\
+			.num_configs = ARRAY_SIZE(cfgs),		\
+		},							\
+	}
+
+#define PIN_MAP_CONFIGS_PIN_DEFAULT(dev, pinctrl, pin, cfgs)		\
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, pinctrl, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_PIN_HOG(dev, state, pin, cfgs)			\
+	PIN_MAP_CONFIGS_PIN(dev, state, dev, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_PIN_HOG_DEFAULT(dev, pin, cfgs)			\
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, dev, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP(dev, state, pinctrl, grp, cfgs)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_CONFIGS_GROUP,			\
+		.ctrl_dev_name = pinctrl,				\
+		.data.configs = {					\
+			.group_or_pin = grp,				\
+			.configs = cfgs,				\
+			.num_configs = ARRAY_SIZE(cfgs),		\
+		},							\
+	}
+
+#define PIN_MAP_CONFIGS_GROUP_DEFAULT(dev, pinctrl, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP_HOG(dev, state, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, state, dev, grp, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
+
+#ifdef CONFIG_PINCTRL
+
+extern int pinctrl_register_mappings(struct pinctrl_map const *map,
+				unsigned num_maps);
+extern void pinctrl_provide_dummies(void);
+#else
+
+static inline int pinctrl_register_mappings(struct pinctrl_map const *map,
+					   unsigned num_maps)
+{
+	return 0;
+}
+
+static inline void pinctrl_provide_dummies(void)
+{
+}
+#endif /* !CONFIG_PINCTRL */
+#endif
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
new file mode 100644
index 000000000..fe65962b2
--- /dev/null
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -0,0 +1,210 @@
+/*
+ * Interface the generic pinconfig portions of the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
+#define __LINUX_PINCTRL_PINCONF_GENERIC_H
+
+/*
+ * You shouldn't even be able to compile with these enums etc unless you're
+ * using generic pin config. That is why this is defined out.
+ */
+#ifdef CONFIG_GENERIC_PINCONF
+
+/**
+ * enum pin_config_param - possible pin configuration parameters
+ * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a
+ *	transition from say pull-up to pull-down implies that you disable
+ *	pull-up in the process, this setting disables all biasing.
+ * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance
+ *	mode, also know as "third-state" (tristate) or "high-Z" or "floating".
+ *	On output pins this effectively disconnects the pin, which is useful
+ *	if for example some other pin is going to drive the signal connected
+ *	to it for a while. Pins used for input are usually always high
+ *	impedance.
+ * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it
+ *	weakly drives the last value on a tristate bus, also known as a "bus
+ *	holder", "bus keeper" or "repeater". This allows another device on the
+ *	bus to change the value by driving the bus high or low and switching to
+ *	tristate. The argument is ignored.
+ * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
+ *	impedance to VDD). If the argument is != 0 pull-up is enabled,
+ *	if it is 0, pull-up is total, i.e. the pin is connected to VDD.
+ * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high
+ *	impedance to GROUND). If the argument is != 0 pull-down is enabled,
+ *	if it is 0, pull-down is total, i.e. the pin is connected to GROUND.
+ * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based
+ *	on embedded knowledge of the controller hardware, like current mux
+ *	function. The pull direction and possibly strength too will normally
+ *	be decided completely inside the hardware block and not be readable
+ *	from the kernel side.
+ *	If the argument is != 0 pull up/down is enabled, if it is 0, the
+ *	configuration is ignored. The proper way to disable it is to use
+ *	@PIN_CONFIG_BIAS_DISABLE.
+ * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
+ *	low, this is the most typical case and is typically achieved with two
+ *	active transistors on the output. Setting this config will enable
+ *	push-pull mode, the argument is ignored.
+ * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
+ *	collector) which means it is usually wired with other output ports
+ *	which are then pulled up with an external resistor. Setting this
+ *	config will enable open drain mode, the argument is ignored.
+ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
+ *	(open emitter). Setting this config will enable open source mode, the
+ *	argument is ignored.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
+ *	passed as argument. The argument is in mA.
+ * @PIN_CONFIG_INPUT_ENABLE: enable the pin's input.  Note that this does not
+ *	affect the pin's ability to drive output.  1 enables input, 0 disables
+ *	input.
+ * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
+ *      If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
+ *      schmitt-trigger mode is disabled.
+ * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
+ *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
+ *	the threshold value is given on a custom format as argument when
+ *	setting pins to this mode.
+ * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
+ *	which means it will wait for signals to settle when reading inputs. The
+ *	argument gives the debounce time in usecs. Setting the
+ *	argument to zero turns debouncing off.
+ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
+ *	supplies, the argument to this parameter (on a custom format) tells
+ *	the driver which alternative power source to use.
+ * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
+ *	this parameter (on a custom format) tells the driver which alternative
+ *	slew rate to use.
+ * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
+ *	operation, if several modes of operation are supported these can be
+ *	passed in the argument on a custom form, else just use argument 1
+ *	to indicate low power mode, argument 0 turns low power mode off.
+ * @PIN_CONFIG_OUTPUT: this will configure the pin as an output. Use argument
+ *	1 to indicate high level, argument 0 to indicate low level. (Please
+ *	see Documentation/pinctrl.txt, section "GPIO mode pitfalls" for a
+ *	discussion around this parameter.)
+ * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
+ *	you need to pass in custom configurations to the pin controller, use
+ *	PIN_CONFIG_END+1 as the base offset.
+ */
+enum pin_config_param {
+	PIN_CONFIG_BIAS_DISABLE,
+	PIN_CONFIG_BIAS_HIGH_IMPEDANCE,
+	PIN_CONFIG_BIAS_BUS_HOLD,
+	PIN_CONFIG_BIAS_PULL_UP,
+	PIN_CONFIG_BIAS_PULL_DOWN,
+	PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
+	PIN_CONFIG_DRIVE_PUSH_PULL,
+	PIN_CONFIG_DRIVE_OPEN_DRAIN,
+	PIN_CONFIG_DRIVE_OPEN_SOURCE,
+	PIN_CONFIG_DRIVE_STRENGTH,
+	PIN_CONFIG_INPUT_ENABLE,
+	PIN_CONFIG_INPUT_SCHMITT_ENABLE,
+	PIN_CONFIG_INPUT_SCHMITT,
+	PIN_CONFIG_INPUT_DEBOUNCE,
+	PIN_CONFIG_POWER_SOURCE,
+	PIN_CONFIG_SLEW_RATE,
+	PIN_CONFIG_LOW_POWER_MODE,
+	PIN_CONFIG_OUTPUT,
+	PIN_CONFIG_END = 0x7FFF,
+};
+
+#ifdef CONFIG_DEBUG_FS
+#define PCONFDUMP(a, b, c, d) { .param = a, .display = b, .format = c, \
+				.has_arg = d }
+
+struct pin_config_item {
+	const enum pin_config_param param;
+	const char * const display;
+	const char * const format;
+	bool has_arg;
+};
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ * Helpful configuration macro to be used in tables etc.
+ */
+#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL))
+
+/*
+ * The following inlines stuffs a configuration parameter and data value
+ * into and out of an unsigned long argument, as used by the generic pin config
+ * system. We put the parameter in the lower 16 bits and the argument in the
+ * upper 16 bits.
+ */
+
+static inline enum pin_config_param pinconf_to_config_param(unsigned long config)
+{
+	return (enum pin_config_param) (config & 0xffffUL);
+}
+
+static inline u16 pinconf_to_config_argument(unsigned long config)
+{
+	return (enum pin_config_param) ((config >> 16) & 0xffffUL);
+}
+
+static inline unsigned long pinconf_to_config_packed(enum pin_config_param param,
+						     u16 argument)
+{
+	return PIN_CONF_PACKED(param, argument);
+}
+
+#ifdef CONFIG_OF
+
+#include <linux/device.h>
+#include <linux/pinctrl/machine.h>
+struct pinctrl_dev;
+struct pinctrl_map;
+
+struct pinconf_generic_params {
+	const char * const property;
+	enum pin_config_param param;
+	u32 default_value;
+};
+
+int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+		struct device_node *np, struct pinctrl_map **map,
+		unsigned *reserved_maps, unsigned *num_maps,
+		enum pinctrl_map_type type);
+int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
+		struct device_node *np_config, struct pinctrl_map **map,
+		unsigned *num_maps, enum pinctrl_map_type type);
+
+static inline int pinconf_generic_dt_node_to_map_group(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_CONFIGS_GROUP);
+}
+
+static inline int pinconf_generic_dt_node_to_map_pin(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_CONFIGS_PIN);
+}
+
+static inline int pinconf_generic_dt_node_to_map_all(
+		struct pinctrl_dev *pctldev, struct device_node *np_config,
+		struct pinctrl_map **map, unsigned *num_maps)
+{
+	/*
+	 * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser
+	 * to infer the map type from the DT properties used.
+	 */
+	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
+			PIN_MAP_TYPE_INVALID);
+}
+#endif
+
+#endif /* CONFIG_GENERIC_PINCONF */
+
+#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
new file mode 100644
index 000000000..09eb80f25
--- /dev/null
+++ b/include/linux/pinctrl/pinconf.h
@@ -0,0 +1,75 @@
+/*
+ * Interface the pinconfig portions of the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCONF_H
+#define __LINUX_PINCTRL_PINCONF_H
+
+#ifdef CONFIG_PINCONF
+
+#include <linux/pinctrl/machine.h>
+
+struct pinctrl_dev;
+struct seq_file;
+
+/**
+ * struct pinconf_ops - pin config operations, to be implemented by
+ * pin configuration capable drivers.
+ * @is_generic: for pin controllers that want to use the generic interface,
+ *	this flag tells the framework that it's generic.
+ * @pin_config_get: get the config of a certain pin, if the requested config
+ *	is not available on this controller this should return -ENOTSUPP
+ *	and if it is available but disabled it should return -EINVAL
+ * @pin_config_set: configure an individual pin
+ * @pin_config_group_get: get configurations for an entire pin group
+ * @pin_config_group_set: configure all pins in a group
+ * @pin_config_dbg_parse_modify: optional debugfs to modify a pin configuration
+ * @pin_config_dbg_show: optional debugfs display hook that will provide
+ *	per-device info for a certain pin in debugfs
+ * @pin_config_group_dbg_show: optional debugfs display hook that will provide
+ *	per-device info for a certain group in debugfs
+ * @pin_config_config_dbg_show: optional debugfs display hook that will decode
+ *	and display a driver's pin configuration parameter
+ */
+struct pinconf_ops {
+#ifdef CONFIG_GENERIC_PINCONF
+	bool is_generic;
+#endif
+	int (*pin_config_get) (struct pinctrl_dev *pctldev,
+			       unsigned pin,
+			       unsigned long *config);
+	int (*pin_config_set) (struct pinctrl_dev *pctldev,
+			       unsigned pin,
+			       unsigned long *configs,
+			       unsigned num_configs);
+	int (*pin_config_group_get) (struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     unsigned long *config);
+	int (*pin_config_group_set) (struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     unsigned long *configs,
+				     unsigned num_configs);
+	int (*pin_config_dbg_parse_modify) (struct pinctrl_dev *pctldev,
+					   const char *arg,
+					   unsigned long *config);
+	void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev,
+				     struct seq_file *s,
+				     unsigned offset);
+	void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
+					   struct seq_file *s,
+					   unsigned selector);
+	void (*pin_config_config_dbg_show) (struct pinctrl_dev *pctldev,
+					    struct seq_file *s,
+					    unsigned long config);
+};
+
+#endif
+
+#endif /* __LINUX_PINCTRL_PINCONF_H */
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
new file mode 100644
index 000000000..b5919f8e6
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -0,0 +1,24 @@
+/*
+ * Standard pin control state definitions
+ */
+
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ *	into as default, usually this means the pins are up and ready to
+ *	be used by the device driver. This state is commonly used by
+ *	hogs to configure muxing and pins at boot, and also as a state
+ *	to go into when returning from sleep and idle in
+ *	.pm_runtime_resume() or ordinary .resume() for example.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ *	when the pins are idle. This is a state where the system is relaxed
+ *	but not fully sleeping - some power may be on but clocks gated for
+ *	example. Could typically be set from a pm_runtime_suspend() or
+ *	pm_runtime_idle() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ *	when the pins are sleeping. This is a state where the system is in
+ *	its lowest sleep state. Could typically be set from an
+ *	ordinary .suspend() function.
+ */
+#define PINCTRL_STATE_DEFAULT "default"
+#define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
new file mode 100644
index 000000000..66e469751
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl.h
@@ -0,0 +1,190 @@
+/*
+ * Interface the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCTRL_H
+#define __LINUX_PINCTRL_PINCTRL_H
+
+#ifdef CONFIG_PINCTRL
+
+#include <linux/radix-tree.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/pinctrl/pinctrl-state.h>
+
+struct device;
+struct pinctrl_dev;
+struct pinctrl_map;
+struct pinmux_ops;
+struct pinconf_ops;
+struct pin_config_item;
+struct gpio_chip;
+struct device_node;
+
+/**
+ * struct pinctrl_pin_desc - boards/machines provide information on their
+ * pins, pads or other muxable units in this struct
+ * @number: unique pin number from the global pin number space
+ * @name: a name for this pin
+ * @drv_data: driver-defined per-pin data. pinctrl core does not touch this
+ */
+struct pinctrl_pin_desc {
+	unsigned number;
+	const char *name;
+	void *drv_data;
+};
+
+/* Convenience macro to define a single named or anonymous pin descriptor */
+#define PINCTRL_PIN(a, b) { .number = a, .name = b }
+#define PINCTRL_PIN_ANON(a) { .number = a }
+
+/**
+ * struct pinctrl_gpio_range - each pin controller can provide subranges of
+ * the GPIO number space to be handled by the controller
+ * @node: list node for internal use
+ * @name: a name for the chip in this range
+ * @id: an ID number for the chip in this range
+ * @base: base offset of the GPIO range
+ * @pin_base: base pin number of the GPIO range if pins == NULL
+ * @pins: enumeration of pins in GPIO range or NULL
+ * @npins: number of pins in the GPIO range, including the base number
+ * @gc: an optional pointer to a gpio_chip
+ */
+struct pinctrl_gpio_range {
+	struct list_head node;
+	const char *name;
+	unsigned int id;
+	unsigned int base;
+	unsigned int pin_base;
+	unsigned const *pins;
+	unsigned int npins;
+	struct gpio_chip *gc;
+};
+
+/**
+ * struct pinctrl_ops - global pin control operations, to be implemented by
+ * pin controller drivers.
+ * @get_groups_count: Returns the count of total number of groups registered.
+ * @get_group_name: return the group name of the pin group
+ * @get_group_pins: return an array of pins corresponding to a certain
+ *	group selector @pins, and the size of the array in @num_pins
+ * @pin_dbg_show: optional debugfs display hook that will provide per-device
+ *	info for a certain pin in debugfs
+ * @dt_node_to_map: parse a device tree "pin configuration node", and create
+ *	mapping table entries for it. These are returned through the @map and
+ *	@num_maps output parameters. This function is optional, and may be
+ *	omitted for pinctrl drivers that do not support device tree.
+ * @dt_free_map: free mapping table entries created via @dt_node_to_map. The
+ *	top-level @map pointer must be freed, along with any dynamically
+ *	allocated members of the mapping table entries themselves. This
+ *	function is optional, and may be omitted for pinctrl drivers that do
+ *	not support device tree.
+ */
+struct pinctrl_ops {
+	int (*get_groups_count) (struct pinctrl_dev *pctldev);
+	const char *(*get_group_name) (struct pinctrl_dev *pctldev,
+				       unsigned selector);
+	int (*get_group_pins) (struct pinctrl_dev *pctldev,
+			       unsigned selector,
+			       const unsigned **pins,
+			       unsigned *num_pins);
+	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
+			  unsigned offset);
+	int (*dt_node_to_map) (struct pinctrl_dev *pctldev,
+			       struct device_node *np_config,
+			       struct pinctrl_map **map, unsigned *num_maps);
+	void (*dt_free_map) (struct pinctrl_dev *pctldev,
+			     struct pinctrl_map *map, unsigned num_maps);
+};
+
+/**
+ * struct pinctrl_desc - pin controller descriptor, register this to pin
+ * control subsystem
+ * @name: name for the pin controller
+ * @pins: an array of pin descriptors describing all the pins handled by
+ *	this pin controller
+ * @npins: number of descriptors in the array, usually just ARRAY_SIZE()
+ *	of the pins field above
+ * @pctlops: pin control operation vtable, to support global concepts like
+ *	grouping of pins, this is optional.
+ * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver
+ * @confops: pin config operations vtable, if you support pin configuration in
+ *	your driver
+ * @owner: module providing the pin controller, used for refcounting
+ * @num_custom_params: Number of driver-specific custom parameters to be parsed
+ *	from the hardware description
+ * @custom_params: List of driver_specific custom parameters to be parsed from
+ *	the hardware description
+ * @custom_conf_items: Information how to print @params in debugfs, must be
+ *	the same size as the @custom_params, i.e. @num_custom_params
+ */
+struct pinctrl_desc {
+	const char *name;
+	struct pinctrl_pin_desc const *pins;
+	unsigned int npins;
+	const struct pinctrl_ops *pctlops;
+	const struct pinmux_ops *pmxops;
+	const struct pinconf_ops *confops;
+	struct module *owner;
+#ifdef CONFIG_GENERIC_PINCONF
+	unsigned int num_custom_params;
+	const struct pinconf_generic_params *custom_params;
+	const struct pin_config_item *custom_conf_items;
+#endif
+};
+
+/* External interface to pin controller */
+extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
+				struct device *dev, void *driver_data);
+extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
+extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
+extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *ranges,
+				unsigned nranges);
+extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+
+extern struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
+		struct pinctrl_gpio_range *range);
+extern struct pinctrl_gpio_range *
+pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
+				 unsigned int pin);
+extern int pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				const char *pin_group, const unsigned **pins,
+				unsigned *num_pins);
+
+#ifdef CONFIG_OF
+extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np);
+#else
+static inline
+struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
+extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev);
+extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
+#else
+
+struct pinctrl_dev;
+
+/* Sufficiently stupid default functions when pinctrl is not in use */
+static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
+{
+	return pin >= 0;
+}
+
+#endif /* !CONFIG_PINCTRL */
+
+#endif /* __LINUX_PINCTRL_PINCTRL_H */
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
new file mode 100644
index 000000000..511bda9ed
--- /dev/null
+++ b/include/linux/pinctrl/pinmux.h
@@ -0,0 +1,86 @@
+/*
+ * Interface the pinmux subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINMUX_H
+#define __LINUX_PINCTRL_PINMUX_H
+
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#ifdef CONFIG_PINMUX
+
+struct pinctrl_dev;
+
+/**
+ * struct pinmux_ops - pinmux operations, to be implemented by pin controller
+ * drivers that support pinmuxing
+ * @request: called by the core to see if a certain pin can be made
+ *	available for muxing. This is called by the core to acquire the pins
+ *	before selecting any actual mux setting across a function. The driver
+ *	is allowed to answer "no" by returning a negative error code
+ * @free: the reverse function of the request() callback, frees a pin after
+ *	being requested
+ * @get_functions_count: returns number of selectable named functions available
+ *	in this pinmux driver
+ * @get_function_name: return the function name of the muxing selector,
+ *	called by the core to figure out which mux setting it shall map a
+ *	certain device to
+ * @get_function_groups: return an array of groups names (in turn
+ *	referencing pins) connected to a certain function selector. The group
+ *	name can be used with the generic @pinctrl_ops to retrieve the
+ *	actual pins affected. The applicable groups will be returned in
+ *	@groups and the number of groups in @num_groups
+ * @set_mux: enable a certain muxing function with a certain pin group. The
+ *	driver does not need to figure out whether enabling this function
+ *	conflicts some other use of the pins in that group, such collisions
+ *	are handled by the pinmux subsystem. The @func_selector selects a
+ *	certain function whereas @group_selector selects a certain set of pins
+ *	to be used. On simple controllers the latter argument may be ignored
+ * @gpio_request_enable: requests and enables GPIO on a certain pin.
+ *	Implement this only if you can mux every pin individually as GPIO. The
+ *	affected GPIO range is passed along with an offset(pin number) into that
+ *	specific GPIO range - function selectors and pin groups are orthogonal
+ *	to this, the core will however make sure the pins do not collide.
+ * @gpio_disable_free: free up GPIO muxing on a certain pin, the reverse of
+ *	@gpio_request_enable
+ * @gpio_set_direction: Since controllers may need different configurations
+ *	depending on whether the GPIO is configured as input or output,
+ *	a direction selector function may be implemented as a backing
+ *	to the GPIO controllers that need pin muxing.
+ */
+struct pinmux_ops {
+	int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*get_functions_count) (struct pinctrl_dev *pctldev);
+	const char *(*get_function_name) (struct pinctrl_dev *pctldev,
+					  unsigned selector);
+	int (*get_function_groups) (struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  const char * const **groups,
+				  unsigned * const num_groups);
+	int (*set_mux) (struct pinctrl_dev *pctldev, unsigned func_selector,
+			unsigned group_selector);
+	int (*gpio_request_enable) (struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned offset);
+	void (*gpio_disable_free) (struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset);
+	int (*gpio_set_direction) (struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset,
+				   bool input);
+};
+
+#endif /* CONFIG_PINMUX */
+
+#endif /* __LINUX_PINCTRL_PINMUX_H */