Linux-libre 4.6.2-gnu

11 files changed, 284 insertions, 180 deletions

diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h
new file mode 100644
index 000000000..7bd8ed7d9
--- /dev/null
+++ b/include/linux/platform_data/ad5761.h
@@ -0,0 +1,44 @@
+/*
+ * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter
+ *
+ * Copyright 2016 Qtechnology A/S
+ * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com>
+ *
+ * Licensed under the GPL-2.
+ */
+#ifndef __LINUX_PLATFORM_DATA_AD5761_H__
+#define __LINUX_PLATFORM_DATA_AD5761_H__
+
+/**
+ * enum ad5761_voltage_range - Voltage range the AD5761 is configured for.
+ * @AD5761_VOLTAGE_RANGE_M10V_10V:  -10V to  10V
+ * @AD5761_VOLTAGE_RANGE_0V_10V:      0V to  10V
+ * @AD5761_VOLTAGE_RANGE_M5V_5V:     -5V to   5V
+ * @AD5761_VOLTAGE_RANGE_0V_5V:       0V to   5V
+ * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V
+ * @AD5761_VOLTAGE_RANGE_M3V_3V:     -3V to   3V
+ * @AD5761_VOLTAGE_RANGE_0V_16V:      0V to  16V
+ * @AD5761_VOLTAGE_RANGE_0V_20V:      0V to  20V
+ */
+
+enum ad5761_voltage_range {
+	AD5761_VOLTAGE_RANGE_M10V_10V,
+	AD5761_VOLTAGE_RANGE_0V_10V,
+	AD5761_VOLTAGE_RANGE_M5V_5V,
+	AD5761_VOLTAGE_RANGE_0V_5V,
+	AD5761_VOLTAGE_RANGE_M2V5_7V5,
+	AD5761_VOLTAGE_RANGE_M3V_3V,
+	AD5761_VOLTAGE_RANGE_0V_16V,
+	AD5761_VOLTAGE_RANGE_0V_20V,
+};
+
+/**
+ * struct ad5761_platform_data - AD5761 DAC driver platform data
+ * @voltage_range: Voltage range the AD5761 is configured for
+ */
+
+struct ad5761_platform_data {
+	enum ad5761_voltage_range voltage_range;
+};
+
+#endif
diff --git a/include/linux/platform_data/ad7879.h b/include/linux/platform_data/ad7879.h
new file mode 100644
index 000000000..69e2e1fd2
--- /dev/null
+++ b/include/linux/platform_data/ad7879.h
@@ -0,0 +1,41 @@
+/* linux/platform_data/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+	u16	model;			/* 7879 */
+	u16	x_plate_ohms;
+	u16	x_min, x_max;
+	u16	y_min, y_max;
+	u16	pressure_min, pressure_max;
+
+	bool	swap_xy;		/* swap x and y axes */
+
+	/* [0..255] 0=OFF Starts at 1=550us and goes
+	 * all the way to 9.440ms in steps of 35us.
+	 */
+	u8	pen_down_acc_interval;
+	/* [0..15] Starts at 0=128us and goes all the
+	 * way to 4.096ms in steps of 128us.
+	 */
+	u8	first_conversion_delay;
+	/* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+	u8	acquisition_time;
+	/* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+	u8	averaging;
+	/* [0..3] Perform X measurements 0 = OFF,
+	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+	 */
+	u8	median;
+	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+	 * requires CONFIG_GPIOLIB
+	 */
+	bool	gpio_export;
+	/* identifies the first GPIO number handled by this chip;
+	 * or, if negative, requests dynamic ID allocation.
+	 */
+	s32	gpio_base;
+};
diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h
index a81766cae..9db1b905d 100644
--- a/include/linux/platform_data/adau17x1.h
+++ b/include/linux/platform_data/adau17x1.h
@@ -1,5 +1,5 @@
 /*
- * Driver for ADAU1761/ADAU1461/ADAU1761/ADAU1961/ADAU1781/ADAU1781 codecs
+ * Driver for ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 codecs
  *
  * Copyright 2011-2014 Analog Devices Inc.
  * Author: Lars-Peter Clausen <lars@metafoo.de>
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
index c42aa89d3..dc9a13e5a 100644
--- a/include/linux/platform_data/at24.h
+++ b/include/linux/platform_data/at24.h
@@ -9,7 +9,7 @@
 #define _LINUX_AT24_H
 
 #include <linux/types.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>
 
 /**
  * struct at24_platform_data - data to set up at24 (generic eeprom) driver
@@ -17,7 +17,7 @@
  * @page_size: number of byte which can be written in one go
  * @flags: tunable options, check AT24_FLAG_* defines
  * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via memory_accessor, see example
+	code to access eeprom via nvmem, see example
  * @context: optional parameter passed to setup()
  *
  * If you set up a custom eeprom type, please double-check the parameters.
@@ -26,13 +26,13 @@
  *
  * An example in pseudo code for a setup() callback:
  *
- * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * void get_mac_addr(struct mvmem_device *nvmem, void *context)
  * {
  *	u8 *mac_addr = ethernet_pdata->mac_addr;
  *	off_t offset = context;
  *
  *	// Read MAC addr from EEPROM
- *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
  *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
  * }
  *
@@ -48,7 +48,7 @@ struct at24_platform_data {
 #define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
 #define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
 
-	void		(*setup)(struct memory_accessor *, void *context);
+	void		(*setup)(struct nvmem_device *nvmem, void *context);
 	void		*context;
 };
 
diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h
deleted file mode 100644
index e75dcbf2b..000000000
--- a/include/linux/platform_data/brcmfmac-sdio.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (c) 2013 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _LINUX_BRCMFMAC_PLATFORM_H
-#define _LINUX_BRCMFMAC_PLATFORM_H
-
-/*
- * Platform specific driver functions and data. Through the platform specific
- * device data functions can be provided to help the brcmfmac driver to
- * operate with the device in combination with the used platform.
- *
- * Use the platform data in the following (similar) way:
- *
- *
-#include <brcmfmac_platform.h>
-
-
-static void brcmfmac_power_on(void)
-{
-}
-
-static void brcmfmac_power_off(void)
-{
-}
-
-static void brcmfmac_reset(void)
-{
-}
-
-static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = {
-	.power_on		= brcmfmac_power_on,
-	.power_off		= brcmfmac_power_off,
-	.reset			= brcmfmac_reset
-};
-
-static struct platform_device brcmfmac_device = {
-	.name			= BRCMFMAC_SDIO_PDATA_NAME,
-	.id			= PLATFORM_DEVID_NONE,
-	.dev.platform_data	= &brcmfmac_sdio_pdata
-};
-
-void __init brcmfmac_init_pdata(void)
-{
-	brcmfmac_sdio_pdata.oob_irq_supported = true;
-	brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB);
-	brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ |
-					    IORESOURCE_IRQ_HIGHLEVEL;
-	platform_device_register(&brcmfmac_device);
-}
- *
- *
- * Note: the brcmfmac can be loaded as module or be statically built-in into
- * the kernel. If built-in then do note that it uses module_init (and
- * module_exit) routines which equal device_initcall. So if you intend to
- * create a module with the platform specific data for the brcmfmac and have
- * it built-in to the kernel then use a higher initcall then device_initcall
- * (see init.h). If this is not done then brcmfmac will load without problems
- * but will not pickup the platform data.
- *
- * When the driver does not "detect" platform driver data then it will continue
- * without reporting anything and just assume there is no data needed. Which is
- * probably true for most platforms.
- *
- * Explanation of the platform_data fields:
- *
- * drive_strength: is the preferred drive_strength to be used for the SDIO
- * pins. If 0 then a default value will be used. This is the target drive
- * strength, the exact drive strength which will be used depends on the
- * capabilities of the device.
- *
- * oob_irq_supported: does the board have support for OOB interrupts. SDIO
- * in-band interrupts are relatively slow and for having less overhead on
- * interrupt processing an out of band interrupt can be used. If the HW
- * supports this then enable this by setting this field to true and configure
- * the oob related fields.
- *
- * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are
- * used for registering the irq using request_irq function.
- *
- * broken_sg_support: flag for broken sg list support of SDIO host controller.
- * Set this to true if the SDIO host controller has higher align requirement
- * than 32 bytes for each scatterlist item.
- *
- * sd_head_align: alignment requirement for start of data buffer
- *
- * sd_sgentry_align: length alignment requirement for each sg entry
- *
- * power_on: This function is called by the brcmfmac when the module gets
- * loaded. This can be particularly useful for low power devices. The platform
- * spcific routine may for example decide to power up the complete device.
- * If there is no use-case for this function then provide NULL.
- *
- * power_off: This function is called by the brcmfmac when the module gets
- * unloaded. At this point the device can be powered down or otherwise be reset.
- * So if an actual power_off is not supported but reset is then reset the device
- * when this function gets called. This can be particularly useful for low power
- * devices. If there is no use-case for this function (either power-down or
- * reset) then provide NULL.
- *
- * reset: This function can get called if the device communication broke down.
- * This functionality is particularly useful in case of SDIO type devices. It is
- * possible to reset a dongle via sdio data interface, but it requires that
- * this is fully functional. This function is chip/module specific and this
- * function should return only after the complete reset has completed.
- */
-
-#define BRCMFMAC_SDIO_PDATA_NAME	"brcmfmac_sdio"
-
-struct brcmfmac_sdio_platform_data {
-	unsigned int drive_strength;
-	bool oob_irq_supported;
-	unsigned int oob_irq_nr;
-	unsigned long oob_irq_flags;
-	bool broken_sg_support;
-	unsigned short sd_head_align;
-	unsigned short sd_sgentry_align;
-	void (*power_on)(void);
-	void (*power_off)(void);
-	void (*reset)(void);
-};
-
-#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
diff --git a/include/linux/platform_data/brcmfmac.h b/include/linux/platform_data/brcmfmac.h
new file mode 100644
index 000000000..1d30bf278
--- /dev/null
+++ b/include/linux/platform_data/brcmfmac.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 201 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_BRCMFMAC_PLATFORM_H
+#define _LINUX_BRCMFMAC_PLATFORM_H
+
+
+#define BRCMFMAC_PDATA_NAME		"brcmfmac"
+
+#define BRCMFMAC_COUNTRY_BUF_SZ		4
+
+
+/*
+ * Platform specific driver functions and data. Through the platform specific
+ * device data functions and data can be provided to help the brcmfmac driver to
+ * operate with the device in combination with the used platform.
+ */
+
+
+/**
+ * Note: the brcmfmac can be loaded as module or be statically built-in into
+ * the kernel. If built-in then do note that it uses module_init (and
+ * module_exit) routines which equal device_initcall. So if you intend to
+ * create a module with the platform specific data for the brcmfmac and have
+ * it built-in to the kernel then use a higher initcall then device_initcall
+ * (see init.h). If this is not done then brcmfmac will load without problems
+ * but will not pickup the platform data.
+ *
+ * When the driver does not "detect" platform driver data then it will continue
+ * without reporting anything and just assume there is no data needed. Which is
+ * probably true for most platforms.
+ */
+
+/**
+ * enum brcmf_bus_type - Bus type identifier. Currently SDIO, USB and PCIE are
+ *			 supported.
+ */
+enum brcmf_bus_type {
+	BRCMF_BUSTYPE_SDIO,
+	BRCMF_BUSTYPE_USB,
+	BRCMF_BUSTYPE_PCIE
+};
+
+
+/**
+ * struct brcmfmac_sdio_pd - SDIO Device specific platform data.
+ *
+ * @txglomsz:		SDIO txglom size. Use 0 if default of driver is to be
+ *			used.
+ * @drive_strength:	is the preferred drive_strength to be used for the SDIO
+ *			pins. If 0 then a default value will be used. This is
+ *			the target drive strength, the exact drive strength
+ *			which will be used depends on the capabilities of the
+ *			device.
+ * @oob_irq_supported:	does the board have support for OOB interrupts. SDIO
+ *			in-band interrupts are relatively slow and for having
+ *			less overhead on interrupt processing an out of band
+ *			interrupt can be used. If the HW supports this then
+ *			enable this by setting this field to true and configure
+ *			the oob related fields.
+ * @oob_irq_nr,
+ * @oob_irq_flags:	the OOB interrupt information. The values are used for
+ *			registering the irq using request_irq function.
+ * @broken_sg_support:	flag for broken sg list support of SDIO host controller.
+ *			Set this to true if the SDIO host controller has higher
+ *			align requirement than 32 bytes for each scatterlist
+ *			item.
+ * @sd_head_align:	alignment requirement for start of data buffer.
+ * @sd_sgentry_align:	length alignment requirement for each sg entry.
+ * @reset:		This function can get called if the device communication
+ *			broke down. This functionality is particularly useful in
+ *			case of SDIO type devices. It is possible to reset a
+ *			dongle via sdio data interface, but it requires that
+ *			this is fully functional. This function is chip/module
+ *			specific and this function should return only after the
+ *			complete reset has completed.
+ */
+struct brcmfmac_sdio_pd {
+	int		txglomsz;
+	unsigned int	drive_strength;
+	bool		oob_irq_supported;
+	unsigned int	oob_irq_nr;
+	unsigned long	oob_irq_flags;
+	bool		broken_sg_support;
+	unsigned short	sd_head_align;
+	unsigned short	sd_sgentry_align;
+	void		(*reset)(void);
+};
+
+/**
+ * struct brcmfmac_pd_cc_entry - Struct for translating user space country code
+ *				 (iso3166) to firmware country code and
+ *				 revision.
+ *
+ * @iso3166:	iso3166 alpha 2 country code string.
+ * @cc:		firmware country code string.
+ * @rev:	firmware country code revision.
+ */
+struct brcmfmac_pd_cc_entry {
+	char	iso3166[BRCMFMAC_COUNTRY_BUF_SZ];
+	char	cc[BRCMFMAC_COUNTRY_BUF_SZ];
+	s32	rev;
+};
+
+/**
+ * struct brcmfmac_pd_cc - Struct for translating country codes as set by user
+ *			   space to a country code and rev which can be used by
+ *			   firmware.
+ *
+ * @table_size:	number of entries in table (> 0)
+ * @table:	array of 1 or more elements with translation information.
+ */
+struct brcmfmac_pd_cc {
+	int				table_size;
+	struct brcmfmac_pd_cc_entry	table[0];
+};
+
+/**
+ * struct brcmfmac_pd_device - Device specific platform data. (id/rev/bus_type)
+ *			       is the unique identifier of the device.
+ *
+ * @id:			ID of the device for which this data is. In case of SDIO
+ *			or PCIE this is the chipid as identified by chip.c In
+ *			case of USB this is the chipid as identified by the
+ *			device query.
+ * @rev:		chip revision, see id.
+ * @bus_type:		The type of bus. Some chipid/rev exist for different bus
+ *			types. Each bus type has its own set of settings.
+ * @feature_disable:	Bitmask of features to disable (override), See feature.c
+ *			in brcmfmac for details.
+ * @country_codes:	If available, pointer to struct for translating country
+ *			codes.
+ * @bus:		Bus specific (union) device settings. Currently only
+ *			SDIO.
+ */
+struct brcmfmac_pd_device {
+	unsigned int		id;
+	unsigned int		rev;
+	enum brcmf_bus_type	bus_type;
+	unsigned int		feature_disable;
+	struct brcmfmac_pd_cc	*country_codes;
+	union {
+		struct brcmfmac_sdio_pd sdio;
+	} bus;
+};
+
+/**
+ * struct brcmfmac_platform_data - BRCMFMAC specific platform data.
+ *
+ * @power_on:	This function is called by the brcmfmac driver when the module
+ *		gets loaded. This can be particularly useful for low power
+ *		devices. The platform spcific routine may for example decide to
+ *		power up the complete device. If there is no use-case for this
+ *		function then provide NULL.
+ * @power_off:	This function is called by the brcmfmac when the module gets
+ *		unloaded. At this point the devices can be powered down or
+ *		otherwise be reset. So if an actual power_off is not supported
+ *		but reset is supported by the devices then reset the devices
+ *		when this function gets called. This can be particularly useful
+ *		for low power devices. If there is no use-case for this
+ *		function then provide NULL.
+ */
+struct brcmfmac_platform_data {
+	void	(*power_on)(void);
+	void	(*power_off)(void);
+	char	*fw_alternative_path;
+	int	device_count;
+	struct brcmfmac_pd_device devices[0];
+};
+
+
+#endif /* _LINUX_BRCMFMAC_PLATFORM_H */
diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h
deleted file mode 100644
index ca1399208..000000000
--- a/include/linux/platform_data/microread.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Driver include for the Inside Secure microread NFC Chip.
- *
- * Copyright (C) 2011 Tieto Poland
- * Copyright (C) 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _MICROREAD_H
-#define _MICROREAD_H
-
-#include <linux/i2c.h>
-
-#define MICROREAD_DRIVER_NAME	"microread"
-
-/* board config platform data for microread */
-struct microread_nfc_platform_data {
-	unsigned int rst_gpio;
-	unsigned int irq_gpio;
-	unsigned int ioh_gpio;
-};
-
-#endif /* _MICROREAD_H */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 36bb92172..c55e42ee5 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -40,7 +40,6 @@ struct s3c2410_nand_set {
 	char			*name;
 	int			*nr_map;
 	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
 };
 
 struct s3c2410_platform_nand {
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index aed170588..698d0d59d 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -28,6 +28,7 @@ enum ntc_thermistor_type {
 	TYPE_NCPXXWL333,
 	TYPE_B57330V2103,
 	TYPE_NCPXXWF104,
+	TYPE_NCPXXXH103,
 };
 
 struct ntc_thermistor_platform_data {
diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h
index 4504d5d59..009e1d83f 100644
--- a/include/linux/platform_data/sa11x0-serial.h
+++ b/include/linux/platform_data/sa11x0-serial.h
@@ -26,8 +26,12 @@ struct sa1100_port_fns {
 void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
 void sa1100_register_uart(int idx, int port);
 #else
-#define sa1100_register_uart_fns(fns) do { } while (0)
-#define sa1100_register_uart(idx,port) do { } while (0)
+static inline void sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+{
+}
+static inline void sa1100_register_uart(int idx, int port)
+{
+}
 #endif
 
 #endif
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index d09275f3c..2ba2c34ca 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -21,7 +21,7 @@
 #include <linux/device.h>
 #include <linux/pm_qos.h>
 
-#define DRIVER_NAME	"omap_uart"
+#define OMAP_SERIAL_DRIVER_NAME	"omap_uart"
 
 /*
  * Use tty device name as ttyO, [O -> OMAP]