summaryrefslogtreecommitdiff
path: root/include/linux/regulator/driver.h
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /include/linux/regulator/driver.h
Initial import
Diffstat (limited to 'include/linux/regulator/driver.h')
-rw-r--r--include/linux/regulator/driver.h436
1 files changed, 436 insertions, 0 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 000000000..fffa688ac
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,436 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/regulator/consumer.h>
+
+struct regmap;
+struct regulator_dev;
+struct regulator_config;
+struct regulator_init_data;
+struct regulator_enable_gpio;
+
+enum regulator_status {
+ REGULATOR_STATUS_OFF,
+ REGULATOR_STATUS_ON,
+ REGULATOR_STATUS_ERROR,
+ /* fast/normal/idle/standby are flavors of "on" */
+ REGULATOR_STATUS_FAST,
+ REGULATOR_STATUS_NORMAL,
+ REGULATOR_STATUS_IDLE,
+ REGULATOR_STATUS_STANDBY,
+ /* The regulator is enabled but not regulating */
+ REGULATOR_STATUS_BYPASS,
+ /* in case that any other status doesn't apply */
+ REGULATOR_STATUS_UNDEFINED,
+};
+
+/**
+ * struct regulator_linear_range - specify linear voltage ranges
+ *
+ * Specify a range of voltages for regulator_map_linar_range() and
+ * regulator_list_linear_range().
+ *
+ * @min_uV: Lowest voltage in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @uV_step: Step size
+ */
+struct regulator_linear_range {
+ unsigned int min_uV;
+ unsigned int min_sel;
+ unsigned int max_sel;
+ unsigned int uV_step;
+};
+
+/* Initialize struct regulator_linear_range */
+#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \
+{ \
+ .min_uV = _min_uV, \
+ .min_sel = _min_sel, \
+ .max_sel = _max_sel, \
+ .uV_step = _step_uV, \
+}
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * @enable: Configure the regulator as enabled.
+ * @disable: Configure the regulator as disabled.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ * May also return negative errno.
+ *
+ * @set_voltage: Set the voltage for the regulator within the range specified.
+ * The driver should select the voltage closest to min_uV.
+ * @set_voltage_sel: Set the voltage for the regulator using the specified
+ * selector.
+ * @map_voltage: Convert a voltage into a selector
+ * @get_voltage: Return the currently configured voltage for the regulator.
+ * @get_voltage_sel: Return the currently configured voltage selector for the
+ * regulator.
+ * @list_voltage: Return one of the supported voltages, in microvolts; zero
+ * if the selector indicates a voltage that is unusable on this system;
+ * or negative errno. Selectors range from zero to one less than
+ * regulator_desc.n_voltages. Voltages may be reported in any order.
+ *
+ * @set_current_limit: Configure a limit for a current-limited regulator.
+ * The driver should select the current closest to max_uA.
+ * @get_current_limit: Get the configured limit for a current-limited regulator.
+ *
+ * @set_mode: Set the configured operating mode for the regulator.
+ * @get_mode: Get the configured operating mode for the regulator.
+ * @get_status: Return actual (not as-configured) status of regulator, as a
+ * REGULATOR_STATUS value (or negative errno)
+ * @get_optimum_mode: Get the most efficient operating mode for the regulator
+ * when running with the specified parameters.
+ * @set_load: Set the load for the regulator.
+ *
+ * @set_bypass: Set the regulator in bypass mode.
+ * @get_bypass: Get the regulator bypass mode state.
+ *
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ * stabilise after being enabled, in microseconds.
+ * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
+ * select ramp delay equal to or less than(closest) ramp_delay.
+ * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
+ * to stabilise after being set to a new value, in microseconds.
+ * The function provides the from and to voltage selector, the
+ * function should return the worst case.
+ *
+ * @set_suspend_voltage: Set the voltage for the regulator when the system
+ * is suspended.
+ * @set_suspend_enable: Mark the regulator as enabled when the system is
+ * suspended.
+ * @set_suspend_disable: Mark the regulator as disabled when the system is
+ * suspended.
+ * @set_suspend_mode: Set the operating mode for the regulator when the
+ * system is suspended.
+ *
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
+ */
+struct regulator_ops {
+
+ /* enumerate supported voltages */
+ int (*list_voltage) (struct regulator_dev *, unsigned selector);
+
+ /* get/set regulator voltage */
+ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
+ unsigned *selector);
+ int (*map_voltage)(struct regulator_dev *, int min_uV, int max_uV);
+ int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
+ int (*get_voltage) (struct regulator_dev *);
+ int (*get_voltage_sel) (struct regulator_dev *);
+
+ /* get/set regulator current */
+ int (*set_current_limit) (struct regulator_dev *,
+ int min_uA, int max_uA);
+ int (*get_current_limit) (struct regulator_dev *);
+
+ /* enable/disable regulator */
+ int (*enable) (struct regulator_dev *);
+ int (*disable) (struct regulator_dev *);
+ int (*is_enabled) (struct regulator_dev *);
+
+ /* get/set regulator operating mode (defined in consumer.h) */
+ int (*set_mode) (struct regulator_dev *, unsigned int mode);
+ unsigned int (*get_mode) (struct regulator_dev *);
+
+ /* Time taken to enable or set voltage on the regulator */
+ int (*enable_time) (struct regulator_dev *);
+ int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
+ int (*set_voltage_time_sel) (struct regulator_dev *,
+ unsigned int old_selector,
+ unsigned int new_selector);
+
+ /* report regulator status ... most other accessors report
+ * control inputs, this reports results of combining inputs
+ * from Linux (and other sources) with the actual load.
+ * returns REGULATOR_STATUS_* or negative errno.
+ */
+ int (*get_status)(struct regulator_dev *);
+
+ /* get most efficient regulator operating mode for load */
+ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+ int output_uV, int load_uA);
+ /* set the load on the regulator */
+ int (*set_load)(struct regulator_dev *, int load_uA);
+
+ /* control and report on bypass mode */
+ int (*set_bypass)(struct regulator_dev *dev, bool enable);
+ int (*get_bypass)(struct regulator_dev *dev, bool *enable);
+
+ /* the operations below are for configuration of regulator state when
+ * its parent PMIC enters a global STANDBY/HIBERNATE state */
+
+ /* set regulator suspend voltage */
+ int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+ /* enable/disable regulator in suspend state */
+ int (*set_suspend_enable) (struct regulator_dev *);
+ int (*set_suspend_disable) (struct regulator_dev *);
+
+ /* set regulator suspend operating mode (defined in consumer.h) */
+ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+ REGULATOR_VOLTAGE,
+ REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Static regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_config. This
+ * structure contains the non-varying parts of the regulator
+ * description.
+ *
+ * @name: Identifying name for the regulator.
+ * @supply_name: Identifying the regulator supply
+ * @of_match: Name used to identify regulator in DT.
+ * @regulators_node: Name of node containing regulator definitions in DT.
+ * @of_parse_cb: Optional callback called only if of_match is present.
+ * Will be called for each regulator parsed from DT, during
+ * init_data parsing.
+ * The regulator_config passed as argument to the callback will
+ * be a copy of config passed to regulator_register, valid only
+ * for this particular call. Callback may freely change the
+ * config but it cannot store it for later usage.
+ * Callback should return 0 on success or negative ERRNO
+ * indicating failure.
+ * @id: Numerical identifier for the regulator.
+ * @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
+ * @type: Indicates if the regulator is a voltage or current regulator.
+ * @owner: Module providing the regulator, used for refcounting.
+ *
+ * @continuous_voltage_range: Indicates if the regulator can set any
+ * voltage within constrains range.
+ * @n_voltages: Number of selectors available for ops.list_voltage().
+ *
+ * @min_uV: Voltage given by the lowest selector (if linear mapping)
+ * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @linear_min_sel: Minimal selector for starting linear mapping
+ * @fixed_uV: Fixed voltage of rails.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @linear_ranges: A constant table of possible voltage ranges.
+ * @n_linear_ranges: Number of entries in the @linear_ranges table.
+ * @volt_table: Voltage mapping table (if table based mapping)
+ *
+ * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
+ * @vsel_mask: Mask for register bitfield used for selector
+ * @apply_reg: Register for initiate voltage change on the output when
+ * using regulator_set_voltage_sel_regmap
+ * @apply_bit: Register bitfield used for initiate voltage change on the
+ * output when using regulator_set_voltage_sel_regmap
+ * @enable_reg: Register for control when using regmap enable/disable ops
+ * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_val: Enabling value for control when using regmap enable/disable ops
+ * @disable_val: Disabling value for control when using regmap enable/disable ops
+ * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
+ * when using regulator_enable_regmap and friends APIs.
+ * @bypass_reg: Register for control when using regmap set_bypass
+ * @bypass_mask: Mask for control when using regmap set_bypass
+ * @bypass_val_on: Enabling value for control when using regmap set_bypass
+ * @bypass_val_off: Disabling value for control when using regmap set_bypass
+ *
+ * @enable_time: Time taken for initial enable of regulator (in uS).
+ * @off_on_delay: guard time (in uS), before re-enabling a regulator
+ *
+ * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
+ */
+struct regulator_desc {
+ const char *name;
+ const char *supply_name;
+ const char *of_match;
+ const char *regulators_node;
+ int (*of_parse_cb)(struct device_node *,
+ const struct regulator_desc *,
+ struct regulator_config *);
+ int id;
+ bool continuous_voltage_range;
+ unsigned n_voltages;
+ const struct regulator_ops *ops;
+ int irq;
+ enum regulator_type type;
+ struct module *owner;
+
+ unsigned int min_uV;
+ unsigned int uV_step;
+ unsigned int linear_min_sel;
+ int fixed_uV;
+ unsigned int ramp_delay;
+
+ const struct regulator_linear_range *linear_ranges;
+ int n_linear_ranges;
+
+ const unsigned int *volt_table;
+
+ unsigned int vsel_reg;
+ unsigned int vsel_mask;
+ unsigned int apply_reg;
+ unsigned int apply_bit;
+ unsigned int enable_reg;
+ unsigned int enable_mask;
+ unsigned int enable_val;
+ unsigned int disable_val;
+ bool enable_is_inverted;
+ unsigned int bypass_reg;
+ unsigned int bypass_mask;
+ unsigned int bypass_val_on;
+ unsigned int bypass_val_off;
+
+ unsigned int enable_time;
+
+ unsigned int off_on_delay;
+
+ unsigned int (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct regulator_config - Dynamic regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_desc. This structure
+ * contains the runtime variable parts of the regulator description.
+ *
+ * @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
+ * @driver_data: private regulator data
+ * @of_node: OpenFirmware node to parse for device tree bindings (may be
+ * NULL).
+ * @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
+ * insufficient.
+ * @ena_gpio_initialized: GPIO controlling regulator enable was properly
+ * initialized, meaning that >= 0 is a valid gpio
+ * identifier and < 0 is a non existent gpio.
+ * @ena_gpio: GPIO controlling regulator enable.
+ * @ena_gpio_invert: Sense for GPIO enable control.
+ * @ena_gpio_flags: Flags to use when calling gpio_request_one()
+ */
+struct regulator_config {
+ struct device *dev;
+ const struct regulator_init_data *init_data;
+ void *driver_data;
+ struct device_node *of_node;
+ struct regmap *regmap;
+
+ bool ena_gpio_initialized;
+ int ena_gpio;
+ unsigned int ena_gpio_invert:1;
+ unsigned int ena_gpio_flags;
+};
+
+/*
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each
+ * regulator.
+ *
+ * This should *not* be used directly by anything except the regulator
+ * core and notification injection (which should take the mutex and do
+ * no other direct access).
+ */
+struct regulator_dev {
+ const struct regulator_desc *desc;
+ int exclusive;
+ u32 use_count;
+ u32 open_count;
+ u32 bypass_count;
+
+ /* lists we belong to */
+ struct list_head list; /* list of all regulators */
+
+ /* lists we own */
+ struct list_head consumer_list; /* consumers we supply */
+
+ struct blocking_notifier_head notifier;
+ struct mutex mutex; /* consumer lock */
+ struct module *owner;
+ struct device dev;
+ struct regulation_constraints *constraints;
+ struct regulator *supply; /* for tree */
+ const char *supply_name;
+ struct regmap *regmap;
+
+ struct delayed_work disable_work;
+ int deferred_disables;
+
+ void *reg_data; /* regulator_dev data */
+
+ struct dentry *debugfs;
+
+ struct regulator_enable_gpio *ena_pin;
+ unsigned int ena_gpio_state:1;
+
+ /* time when this regulator was disabled last time */
+ unsigned long last_off_jiffy;
+};
+
+struct regulator_dev *
+regulator_register(const struct regulator_desc *regulator_desc,
+ const struct regulator_config *config);
+struct regulator_dev *
+devm_regulator_register(struct device *dev,
+ const struct regulator_desc *regulator_desc,
+ const struct regulator_config *config);
+void regulator_unregister(struct regulator_dev *rdev);
+void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+struct device *rdev_get_dev(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+int regulator_mode_to_status(unsigned int);
+
+int regulator_list_voltage_linear(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_ascend(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
+int regulator_is_enabled_regmap(struct regulator_dev *rdev);
+int regulator_enable_regmap(struct regulator_dev *rdev);
+int regulator_disable_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
+ unsigned int old_selector,
+ unsigned int new_selector);
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
+
+void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
+
+#endif