Initial import

1 files changed, 76 insertions, 0 deletions

diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 000000000..48918be64
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,76 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct regulator_init_data;
+
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name:	Name of the regulator supply
+ * @input_supply:	Name of the input regulator supply
+ * @microvolts:		Output voltage of regulator
+ * @gpio:		GPIO to use for enable control
+ * 			set to -EINVAL if not used
+ * @startup_delay:	Start-up time in microseconds
+ * @gpio_is_open_drain: Gpio pin is open drain or normal type.
+ *			If it is open drain type then HIGH will be set
+ *			through PULL-UP with setting gpio as input
+ *			and low will be set as gpio-output with driven
+ *			to low. For non-open-drain case, the gpio will
+ *			will be in output and drive to low/high accordingly.
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ * 			boot or not. 1 = Yes, 0 = No
+ * 			This is used to keep the regulator at
+ * 			the default state
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
+struct fixed_voltage_config {
+	const char *supply_name;
+	const char *input_supply;
+	int microvolts;
+	int gpio;
+	unsigned startup_delay;
+	unsigned gpio_is_open_drain:1;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
+	struct regulator_init_data *init_data;
+};
+
+struct regulator_consumer_supply;
+
+#if IS_ENABLED(CONFIG_REGULATOR)
+struct platform_device *regulator_register_always_on(int id, const char *name,
+		struct regulator_consumer_supply *supplies, int num_supplies, int uv);
+#else
+static inline struct platform_device *regulator_register_always_on(int id, const char *name,
+		struct regulator_consumer_supply *supplies, int num_supplies, int uv)
+{
+	return NULL;
+}
+#endif
+
+#define regulator_register_fixed(id, s, ns) regulator_register_always_on(id, \
+						"fixed-dummy", s, ns, 0)
+
+#endif