Linux-libre 4.2-gnu

1 files changed, 11 insertions, 75 deletions

diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 6c5e3bb28..7c536ac5b 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -1,6 +1,7 @@
 #ifndef __LINUX_SERIAL_SCI_H
 #define __LINUX_SERIAL_SCI_H
 
+#include <linux/bitops.h>
 #include <linux/serial_core.h>
 #include <linux/sh_dma.h>
 
@@ -10,59 +11,16 @@
 
 #define SCIx_NOT_SUPPORTED	(-1)
 
-/* SCSMR (Serial Mode Register) */
-#define SCSMR_CHR	(1 << 6)	/* 7-bit Character Length */
-#define SCSMR_PE	(1 << 5)	/* Parity Enable */
-#define SCSMR_ODD	(1 << 4)	/* Odd Parity */
-#define SCSMR_STOP	(1 << 3)	/* Stop Bit Length */
-#define SCSMR_CKS	0x0003		/* Clock Select */
-
 /* Serial Control Register (@ = not supported by all parts) */
-#define SCSCR_TIE	(1 << 7)	/* Transmit Interrupt Enable */
-#define SCSCR_RIE	(1 << 6)	/* Receive Interrupt Enable */
-#define SCSCR_TE	(1 << 5)	/* Transmit Enable */
-#define SCSCR_RE	(1 << 4)	/* Receive Enable */
-#define SCSCR_REIE	(1 << 3)	/* Receive Error Interrupt Enable @ */
-#define SCSCR_TOIE	(1 << 2)	/* Timeout Interrupt Enable @ */
-#define SCSCR_CKE1	(1 << 1)	/* Clock Enable 1 */
-#define SCSCR_CKE0	(1 << 0)	/* Clock Enable 0 */
-/* SCIFA/SCIFB only */
-#define SCSCR_TDRQE	(1 << 15)	/* Tx Data Transfer Request Enable */
-#define SCSCR_RDRQE	(1 << 14)	/* Rx Data Transfer Request Enable */
-
-/* SCxSR (Serial Status Register) on SCI */
-#define SCI_TDRE  0x80			/* Transmit Data Register Empty */
-#define SCI_RDRF  0x40			/* Receive Data Register Full */
-#define SCI_ORER  0x20			/* Overrun Error */
-#define SCI_FER   0x10			/* Framing Error */
-#define SCI_PER   0x08			/* Parity Error */
-#define SCI_TEND  0x04			/* Transmit End */
-
-#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
-
-/* SCxSR (Serial Status Register) on SCIF, HSCIF */
-#define SCIF_ER    0x0080		/* Receive Error */
-#define SCIF_TEND  0x0040		/* Transmission End */
-#define SCIF_TDFE  0x0020		/* Transmit FIFO Data Empty */
-#define SCIF_BRK   0x0010		/* Break Detect */
-#define SCIF_FER   0x0008		/* Framing Error */
-#define SCIF_PER   0x0004		/* Parity Error */
-#define SCIF_RDF   0x0002		/* Receive FIFO Data Full */
-#define SCIF_DR    0x0001		/* Receive Data Ready */
-
-#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
-
-/* SCFCR (FIFO Control Register) */
-#define SCFCR_LOOP	(1 << 0)	/* Loopback Test */
-
-/* SCSPTR (Serial Port Register), optional */
-#define SCSPTR_RTSIO	(1 << 7)	/* Serial Port RTS Pin Input/Output */
-#define SCSPTR_CTSIO	(1 << 5)	/* Serial Port CTS Pin Input/Output */
-#define SCSPTR_SPB2IO	(1 << 1)	/* Serial Port Break Input/Output */
-#define SCSPTR_SPB2DT	(1 << 0)	/* Serial Port Break Data */
-
-/* HSSRR HSCIF */
-#define HSCIF_SRE	0x8000		/* Sampling Rate Register Enable */
+#define SCSCR_TIE	BIT(7)	/* Transmit Interrupt Enable */
+#define SCSCR_RIE	BIT(6)	/* Receive Interrupt Enable */
+#define SCSCR_TE	BIT(5)	/* Transmit Enable */
+#define SCSCR_RE	BIT(4)	/* Receive Enable */
+#define SCSCR_REIE	BIT(3)	/* Receive Error Interrupt Enable @ */
+#define SCSCR_TOIE	BIT(2)	/* Timeout Interrupt Enable @ */
+#define SCSCR_CKE1	BIT(1)	/* Clock Enable 1 */
+#define SCSCR_CKE0	BIT(0)	/* Clock Enable 0 */
+
 
 enum {
 	SCIx_PROBE_REGTYPE,
@@ -82,28 +40,6 @@ enum {
 	SCIx_NR_REGTYPES,
 };
 
-/*
- * SCI register subset common for all port types.
- * Not all registers will exist on all parts.
- */
-enum {
-	SCSMR,				/* Serial Mode Register */
-	SCBRR,				/* Bit Rate Register */
-	SCSCR,				/* Serial Control Register */
-	SCxSR,				/* Serial Status Register */
-	SCFCR,				/* FIFO Control Register */
-	SCFDR,				/* FIFO Data Count Register */
-	SCxTDR,				/* Transmit (FIFO) Data Register */
-	SCxRDR,				/* Receive (FIFO) Data Register */
-	SCLSR,				/* Line Status Register */
-	SCTFDR,				/* Transmit FIFO Data Count Register */
-	SCRFDR,				/* Receive FIFO Data Count Register */
-	SCSPTR,				/* Serial Port Register */
-	HSSRR,				/* Sampling Rate Register */
-
-	SCIx_NR_REGS,
-};
-
 struct device;
 
 struct plat_sci_port_ops {
@@ -113,7 +49,7 @@ struct plat_sci_port_ops {
 /*
  * Port-specific capabilities
  */
-#define SCIx_HAVE_RTSCTS	(1 << 0)
+#define SCIx_HAVE_RTSCTS	BIT(0)
 
 /*
  * Platform device specific platform_data struct