Initial import

1 files changed, 38 insertions, 0 deletions

diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
new file mode 100644
index 000000000..403e007ae
--- /dev/null
+++ b/include/linux/spi/eeprom.h
@@ -0,0 +1,38 @@
+#ifndef __LINUX_SPI_EEPROM_H
+#define __LINUX_SPI_EEPROM_H
+
+#include <linux/memory.h>
+
+/*
+ * Put one of these structures in platform_data for SPI EEPROMS handled
+ * by the "at25" driver.  On SPI, most EEPROMS understand the same core
+ * command set.  If you need to support EEPROMs that don't yet fit, add
+ * flags to support those protocol options.  These values all come from
+ * the chip datasheets.
+ */
+struct spi_eeprom {
+	u32		byte_len;
+	char		name[10];
+	u16		page_size;		/* for writes */
+	u16		flags;
+#define	EE_ADDR1	0x0001			/*  8 bit addrs */
+#define	EE_ADDR2	0x0002			/* 16 bit addrs */
+#define	EE_ADDR3	0x0004			/* 24 bit addrs */
+#define	EE_READONLY	0x0008			/* disallow writes */
+
+	/*
+	 * Certain EEPROMS have a size that is larger than the number of address
+	 * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
+	 * but uses only one address byte (A0 to A7) for addressing.) For
+	 * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
+	 * is used. This instruction bit is normally defined as don't care for
+	 * other AT25 like chips.
+	 */
+#define EE_INSTR_BIT3_IS_ADDR	0x0010
+
+	/* for exporting this chip's data to other kernel code */
+	void (*setup)(struct memory_accessor *mem, void *context);
+	void *context;
+};
+
+#endif /* __LINUX_SPI_EEPROM_H */