Initial import

1 files changed, 333 insertions, 0 deletions

diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
new file mode 100644
index 000000000..b0fd9476c
--- /dev/null
+++ b/include/net/ieee80211_radiotap.h
@@ -0,0 +1,333 @@
+/*
+ * Copyright (c) 2003, 2004 David Young.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of David Young may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
+ * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/*
+ * Modifications to fit into the linux IEEE 802.11 stack,
+ * Mike Kershaw (dragorn@kismetwireless.net)
+ */
+
+#ifndef IEEE80211RADIOTAP_H
+#define IEEE80211RADIOTAP_H
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+
+/* Base version of the radiotap packet header data */
+#define PKTHDR_RADIOTAP_VERSION		0
+
+/* A generic radio capture format is desirable. There is one for
+ * Linux, but it is neither rigidly defined (there were not even
+ * units given for some fields) nor easily extensible.
+ *
+ * I suggest the following extensible radio capture format. It is
+ * based on a bitmap indicating which fields are present.
+ *
+ * I am trying to describe precisely what the application programmer
+ * should expect in the following, and for that reason I tell the
+ * units and origin of each measurement (where it applies), or else I
+ * use sufficiently weaselly language ("is a monotonically nondecreasing
+ * function of...") that I cannot set false expectations for lawyerly
+ * readers.
+ */
+
+/*
+ * The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
+struct ieee80211_radiotap_header {
+	u8 it_version;		/* Version 0. Only increases
+				 * for drastic changes,
+				 * introduction of compatible
+				 * new fields does not count.
+				 */
+	u8 it_pad;
+	__le16 it_len;		/* length of the whole
+				 * header in bytes, including
+				 * it_version, it_pad,
+				 * it_len, and data fields.
+				 */
+	__le32 it_present;	/* A bitmap telling which
+				 * fields are present. Set bit 31
+				 * (0x80000000) to extend the
+				 * bitmap by another 32 bits.
+				 * Additional extensions are made
+				 * by setting bit 31.
+				 */
+} __packed;
+
+/* Name                                 Data type    Units
+ * ----                                 ---------    -----
+ *
+ * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
+ *
+ *      Value in microseconds of the MAC's 64-bit 802.11 Time
+ *      Synchronization Function timer when the first bit of the
+ *      MPDU arrived at the MAC. For received frames, only.
+ *
+ * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
+ *
+ *      Tx/Rx frequency in MHz, followed by flags (see below).
+ *
+ * IEEE80211_RADIOTAP_FHSS              __le16       see below
+ *
+ *      For frequency-hopping radios, the hop set (first byte)
+ *      and pattern (second byte).
+ *
+ * IEEE80211_RADIOTAP_RATE              u8           500kb/s
+ *
+ *      Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF signal power at the antenna, decibel difference from
+ *      one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF noise power at the antenna, decibel difference from one
+ *      milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
+ *
+ *      RF signal power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
+ *
+ *      RF noise power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference point.
+ *
+ * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
+ *
+ *      Quality of Barker code lock. Unitless. Monotonically
+ *      nondecreasing with "better" lock strength. Called "Signal
+ *      Quality" in datasheets.  (Is there a standard way to measure
+ *      this?)
+ *
+ * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
+ *
+ *      Transmit power expressed as unitless distance from max
+ *      power set at factory calibration.  0 is max power.
+ *      Monotonically nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
+ *
+ *      Transmit power expressed as decibel distance from max power
+ *      set at factory calibration.  0 is max power.  Monotonically
+ *      nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      Transmit power expressed as dBm (decibels from a 1 milliwatt
+ *      reference). This is the absolute power level measured at
+ *      the antenna port.
+ *
+ * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
+ *
+ *      Properties of transmitted and received frames. See flags
+ *      defined below.
+ *
+ * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
+ *
+ *      Unitless indication of the Rx/Tx antenna for this packet.
+ *      The first antenna is antenna 0.
+ *
+ * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
+ *
+ *     Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
+ *
+ *     Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
+ *
+ *     Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
+ *
+ *     Number of unicast retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_MCS	u8, u8, u8		unitless
+ *
+ *     Contains a bitmap of known fields/flags, the flags, and
+ *     the MCS index.
+ *
+ * IEEE80211_RADIOTAP_AMPDU_STATUS	u32, u16, u8, u8	unitless
+ *
+ *	Contains the AMPDU information for the subframe.
+ *
+ * IEEE80211_RADIOTAP_VHT	u16, u8, u8, u8[4], u8, u8, u16
+ *
+ *	Contains VHT information about this frame.
+ */
+enum ieee80211_radiotap_type {
+	IEEE80211_RADIOTAP_TSFT = 0,
+	IEEE80211_RADIOTAP_FLAGS = 1,
+	IEEE80211_RADIOTAP_RATE = 2,
+	IEEE80211_RADIOTAP_CHANNEL = 3,
+	IEEE80211_RADIOTAP_FHSS = 4,
+	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
+	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
+	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
+	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
+	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
+	IEEE80211_RADIOTAP_ANTENNA = 11,
+	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
+	IEEE80211_RADIOTAP_RX_FLAGS = 14,
+	IEEE80211_RADIOTAP_TX_FLAGS = 15,
+	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+
+	IEEE80211_RADIOTAP_MCS = 19,
+	IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
+	IEEE80211_RADIOTAP_VHT = 21,
+
+	/* valid in every it_present bitmap, even vendor namespaces */
+	IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
+	IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30,
+	IEEE80211_RADIOTAP_EXT = 31
+};
+
+/* Channel flags. */
+#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
+#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
+#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
+#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
+#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
+#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
+#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
+#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
+#define	IEEE80211_CHAN_GSM	0x1000	/* GSM (900 MHz) */
+#define	IEEE80211_CHAN_STURBO	0x2000	/* Static Turbo */
+#define	IEEE80211_CHAN_HALF	0x4000	/* Half channel (10 MHz wide) */
+#define	IEEE80211_CHAN_QUARTER	0x8000	/* Quarter channel (5 MHz wide) */
+
+/* For IEEE80211_RADIOTAP_FLAGS */
+#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
+						 * during CFP
+						 */
+#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
+						 * with short
+						 * preamble
+						 */
+#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
+						 * with WEP encryption
+						 */
+#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
+						 * with fragmentation
+						 */
+#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
+#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
+						 * 802.11 header and payload
+						 * (to 32-bit boundary)
+						 */
+#define IEEE80211_RADIOTAP_F_BADFCS	0x40	/* bad FCS */
+
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADPLCP	0x0002	/* frame has bad PLCP */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
+						 * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
+#define IEEE80211_RADIOTAP_F_TX_NOACK	0x0008	/* don't expect an ack */
+
+
+/* For IEEE80211_RADIOTAP_MCS */
+#define IEEE80211_RADIOTAP_MCS_HAVE_BW		0x01
+#define IEEE80211_RADIOTAP_MCS_HAVE_MCS		0x02
+#define IEEE80211_RADIOTAP_MCS_HAVE_GI		0x04
+#define IEEE80211_RADIOTAP_MCS_HAVE_FMT		0x08
+#define IEEE80211_RADIOTAP_MCS_HAVE_FEC		0x10
+#define IEEE80211_RADIOTAP_MCS_HAVE_STBC	0x20
+
+#define IEEE80211_RADIOTAP_MCS_BW_MASK		0x03
+#define		IEEE80211_RADIOTAP_MCS_BW_20	0
+#define		IEEE80211_RADIOTAP_MCS_BW_40	1
+#define		IEEE80211_RADIOTAP_MCS_BW_20L	2
+#define		IEEE80211_RADIOTAP_MCS_BW_20U	3
+#define IEEE80211_RADIOTAP_MCS_SGI		0x04
+#define IEEE80211_RADIOTAP_MCS_FMT_GF		0x08
+#define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
+#define IEEE80211_RADIOTAP_MCS_STBC_MASK	0x60
+#define		IEEE80211_RADIOTAP_MCS_STBC_1	1
+#define		IEEE80211_RADIOTAP_MCS_STBC_2	2
+#define		IEEE80211_RADIOTAP_MCS_STBC_3	3
+
+#define IEEE80211_RADIOTAP_MCS_STBC_SHIFT	5
+
+/* For IEEE80211_RADIOTAP_AMPDU_STATUS */
+#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN		0x0001
+#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN		0x0002
+#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN		0x0004
+#define IEEE80211_RADIOTAP_AMPDU_IS_LAST		0x0008
+#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR		0x0010
+#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN	0x0020
+
+/* For IEEE80211_RADIOTAP_VHT */
+#define IEEE80211_RADIOTAP_VHT_KNOWN_STBC			0x0001
+#define IEEE80211_RADIOTAP_VHT_KNOWN_TXOP_PS_NA			0x0002
+#define IEEE80211_RADIOTAP_VHT_KNOWN_GI				0x0004
+#define IEEE80211_RADIOTAP_VHT_KNOWN_SGI_NSYM_DIS		0x0008
+#define IEEE80211_RADIOTAP_VHT_KNOWN_LDPC_EXTRA_OFDM_SYM	0x0010
+#define IEEE80211_RADIOTAP_VHT_KNOWN_BEAMFORMED			0x0020
+#define IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH			0x0040
+#define IEEE80211_RADIOTAP_VHT_KNOWN_GROUP_ID			0x0080
+#define IEEE80211_RADIOTAP_VHT_KNOWN_PARTIAL_AID		0x0100
+
+#define IEEE80211_RADIOTAP_VHT_FLAG_STBC			0x01
+#define IEEE80211_RADIOTAP_VHT_FLAG_TXOP_PS_NA			0x02
+#define IEEE80211_RADIOTAP_VHT_FLAG_SGI				0x04
+#define IEEE80211_RADIOTAP_VHT_FLAG_SGI_NSYM_M10_9		0x08
+#define IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM		0x10
+#define IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED			0x20
+
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER0			0x01
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER1			0x02
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER2			0x04
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER3			0x08
+
+/* helpers */
+static inline int ieee80211_get_radiotap_len(unsigned char *data)
+{
+	struct ieee80211_radiotap_header *hdr =
+		(struct ieee80211_radiotap_header *)data;
+
+	return get_unaligned_le16(&hdr->it_len);
+}
+
+#endif				/* IEEE80211_RADIOTAP_H */