Initial import

1 files changed, 140 insertions, 0 deletions

diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
new file mode 100644
index 000000000..ce91215cf
--- /dev/null
+++ b/include/uapi/linux/mroute6.h
@@ -0,0 +1,140 @@
+#ifndef _UAPI__LINUX_MROUTE6_H
+#define _UAPI__LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the pim6sd code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE	200
+#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
+#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
+#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
+#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+#define MRT6_ADD_MFC_PROXY	(MRT6_BASE+10)	/* Add a (*,*|G) mfc entry	*/
+#define MRT6_DEL_MFC_PROXY	(MRT6_BASE+11)	/* Del a (*,*|G) mfc entry	*/
+#define MRT6_MAX	(MRT6_BASE+11)
+
+#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS		32
+typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS	((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE	256
+#endif
+
+typedef	__u32		if_mask;
+#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_MIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+	mifi_t	mif6c_mifi;		/* Index of MIF */
+	unsigned char mif6c_flags;	/* MIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	__u16	 mif6c_pifi;		/* the index of the physical IF */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER	0x1	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
+	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
+	mifi_t	mf6cc_parent;			/* Where it arrived	*/
+	struct if_set mf6cc_ifset;		/* Where it is going */
+};
+
+/*
+ *	Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+	struct sockaddr_in6 src;
+	struct sockaddr_in6 grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+	mifi_t	mifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE		1
+#define MRT6MSG_WRONGMIF	2
+#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
+	__u8		im6_mbz;		/* must be zero		   */
+	__u8		im6_msgtype;		/* what type of message    */
+	__u16		im6_mif;		/* mif rec'd on		   */
+	__u32		im6_pad;		/* padding for 64 bit arch */
+	struct in6_addr	im6_src, im6_dst;
+};
+
+#endif /* _UAPI__LINUX_MROUTE6_H */