Initial import

1 files changed, 1128 insertions, 0 deletions

diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
new file mode 100644
index 000000000..c1592e3e4
--- /dev/null
+++ b/include/uapi/linux/wireless.h
@@ -0,0 +1,1128 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _UAPI_LINUX_WIRELESS_H
+#define _UAPI_LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _UAPI_LINUX_WIRELESS_H */