Initial import

1 files changed, 2097 insertions, 0 deletions

diff --git a/init/Kconfig b/init/Kconfig
new file mode 100644
index 000000000..530520cce
--- /dev/null
+++ b/init/Kconfig
@@ -0,0 +1,2097 @@
+config ARCH
+	string
+	option env="ARCH"
+
+config KERNELVERSION
+	string
+	option env="KERNELVERSION"
+
+config DEFCONFIG_LIST
+	string
+	depends on !UML
+	option defconfig_list
+	default "/lib/modules/$UNAME_RELEASE/.config"
+	default "/etc/kernel-config"
+	default "/boot/config-$UNAME_RELEASE"
+	default "$ARCH_DEFCONFIG"
+	default "arch/$ARCH/defconfig"
+
+config CONSTRUCTORS
+	bool
+	depends on !UML
+
+config IRQ_WORK
+	bool
+
+config BUILDTIME_EXTABLE_SORT
+	bool
+
+menu "General setup"
+
+config PCK_INTERACTIVE
+	bool "Tune kernel for interactivity"
+	default y
+	help
+	  Tunes the kernel for responsiveness at the cost of throughput and power usage.
+
+	  --- VM ---
+	    Mem dirty before bg writeback..:  10 %  -> 128 MiB
+	    Mem dirty before sync writeback:  20 %  -> 256 MiB
+
+	  --- CPU Scheduler (CFS) ---
+	    Scheduling latency.............:   6    ->   3    ms
+	    Minimal granularity............:   0.75 ->   0.3  ms
+	    Wakeup granularity.............:   1    ->   0.5  ms
+	    CPU migration cost.............:   0.5  ->   0.25 ms
+	    Bandwidth slice size...........:   5    ->   3    ms
+
+	  --- CPU Scheduler (BFS) ---
+	    Scheduling interval............:   6    ->   3    ms
+	    ISO task max realtime use......:  70 %  ->  25 %
+
+	  --- CPU Frequency Scaling ---
+	    Ondemand down scaling factor...:   1    ->  10
+
+config SCHED_BFS
+	bool "BFS cpu scheduler"
+	default n
+	help
+	  The Brain Fuck CPU Scheduler for excellent interactivity and
+	  responsiveness on the desktop and solid scalability on normal
+          hardware and commodity servers. Not recommended for 4096 CPUs.
+
+	  Currently incompatible with the Group CPU scheduler, and RCU TORTURE
+          TEST so these options are disabled.
+
+config SCHED_BFS_AUTOISO
+	bool "Automatically use SCHED_ISO policy for X"
+	depends on SCHED_BFS
+	default n
+	help
+	  Selecting this option will automatically use the SCHED_ISO scheduling
+	  policy for X, resulting in an interactivity boost. This *may* cause
+	  things like skipping sound on audio applications that are not run
+	  as SCHED_ISO.
+
+	  Tasks (including X) can be run as sched_iso manually using schedtool.
+
+config BROKEN
+	bool
+
+config BROKEN_ON_SMP
+	bool
+	depends on BROKEN || !SMP
+	default y
+
+config INIT_ENV_ARG_LIMIT
+	int
+	default 32 if !UML
+	default 128 if UML
+	help
+	  Maximum of each of the number of arguments and environment
+	  variables passed to init from the kernel command line.
+
+
+config CROSS_COMPILE
+	string "Cross-compiler tool prefix"
+	help
+	  Same as running 'make CROSS_COMPILE=prefix-' but stored for
+	  default make runs in this kernel build directory.  You don't
+	  need to set this unless you want the configured kernel build
+	  directory to select the cross-compiler automatically.
+
+config COMPILE_TEST
+	bool "Compile also drivers which will not load"
+	default n
+	help
+	  Some drivers can be compiled on a different platform than they are
+	  intended to be run on. Despite they cannot be loaded there (or even
+	  when they load they cannot be used due to missing HW support),
+	  developers still, opposing to distributors, might want to build such
+	  drivers to compile-test them.
+
+	  If you are a developer and want to build everything available, say Y
+	  here. If you are a user/distributor, say N here to exclude useless
+	  drivers to be distributed.
+
+config LOCALVERSION
+	string "Local version - append to kernel release"
+	help
+	  Append an extra string to the end of your kernel version.
+	  This will show up when you type uname, for example.
+	  The string you set here will be appended after the contents of
+	  any files with a filename matching localversion* in your
+	  object and source tree, in that order.  Your total string can
+	  be a maximum of 64 characters.
+
+config LOCALVERSION_AUTO
+	bool "Automatically append version information to the version string"
+	default y
+	help
+	  This will try to automatically determine if the current tree is a
+	  release tree by looking for git tags that belong to the current
+	  top of tree revision.
+
+	  A string of the format -gxxxxxxxx will be added to the localversion
+	  if a git-based tree is found.  The string generated by this will be
+	  appended after any matching localversion* files, and after the value
+	  set in CONFIG_LOCALVERSION.
+
+	  (The actual string used here is the first eight characters produced
+	  by running the command:
+
+	    $ git rev-parse --verify HEAD
+
+	  which is done within the script "scripts/setlocalversion".)
+
+config HAVE_KERNEL_GZIP
+	bool
+
+config HAVE_KERNEL_BZIP2
+	bool
+
+config HAVE_KERNEL_LZMA
+	bool
+
+config HAVE_KERNEL_XZ
+	bool
+
+config HAVE_KERNEL_LZO
+	bool
+
+config HAVE_KERNEL_LZ4
+	bool
+
+choice
+	prompt "Kernel compression mode"
+	default KERNEL_GZIP
+	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4
+	help
+	  The linux kernel is a kind of self-extracting executable.
+	  Several compression algorithms are available, which differ
+	  in efficiency, compression and decompression speed.
+	  Compression speed is only relevant when building a kernel.
+	  Decompression speed is relevant at each boot.
+
+	  If you have any problems with bzip2 or lzma compressed
+	  kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
+	  version of this functionality (bzip2 only), for 2.4, was
+	  supplied by Christian Ludwig)
+
+	  High compression options are mostly useful for users, who
+	  are low on disk space (embedded systems), but for whom ram
+	  size matters less.
+
+	  If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+	bool "Gzip"
+	depends on HAVE_KERNEL_GZIP
+	help
+	  The old and tried gzip compression. It provides a good balance
+	  between compression ratio and decompression speed.
+
+config KERNEL_BZIP2
+	bool "Bzip2"
+	depends on HAVE_KERNEL_BZIP2
+	help
+	  Its compression ratio and speed is intermediate.
+	  Decompression speed is slowest among the choices.  The kernel
+	  size is about 10% smaller with bzip2, in comparison to gzip.
+	  Bzip2 uses a large amount of memory. For modern kernels you
+	  will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+	bool "LZMA"
+	depends on HAVE_KERNEL_LZMA
+	help
+	  This compression algorithm's ratio is best.  Decompression speed
+	  is between gzip and bzip2.  Compression is slowest.
+	  The kernel size is about 33% smaller with LZMA in comparison to gzip.
+
+config KERNEL_XZ
+	bool "XZ"
+	depends on HAVE_KERNEL_XZ
+	help
+	  XZ uses the LZMA2 algorithm and instruction set specific
+	  BCJ filters which can improve compression ratio of executable
+	  code. The size of the kernel is about 30% smaller with XZ in
+	  comparison to gzip. On architectures for which there is a BCJ
+	  filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
+	  will create a few percent smaller kernel than plain LZMA.
+
+	  The speed is about the same as with LZMA: The decompression
+	  speed of XZ is better than that of bzip2 but worse than gzip
+	  and LZO. Compression is slow.
+
+config KERNEL_LZO
+	bool "LZO"
+	depends on HAVE_KERNEL_LZO
+	help
+	  Its compression ratio is the poorest among the choices. The kernel
+	  size is about 10% bigger than gzip; however its speed
+	  (both compression and decompression) is the fastest.
+
+config KERNEL_LZ4
+	bool "LZ4"
+	depends on HAVE_KERNEL_LZ4
+	help
+	  LZ4 is an LZ77-type compressor with a fixed, byte-oriented encoding.
+	  A preliminary version of LZ4 de/compression tool is available at
+	  <https://code.google.com/p/lz4/>.
+
+	  Its compression ratio is worse than LZO. The size of the kernel
+	  is about 8% bigger than LZO. But the decompression speed is
+	  faster than LZO.
+
+endchoice
+
+config DEFAULT_HOSTNAME
+	string "Default hostname"
+	default "(none)"
+	help
+	  This option determines the default system hostname before userspace
+	  calls sethostname(2). The kernel traditionally uses "(none)" here,
+	  but you may wish to use a different default here to make a minimal
+	  system more usable with less configuration.
+
+config SWAP
+	bool "Support for paging of anonymous memory (swap)"
+	depends on MMU && BLOCK
+	default y
+	help
+	  This option allows you to choose whether you want to have support
+	  for so called swap devices or swap files in your kernel that are
+	  used to provide more virtual memory than the actual RAM present
+	  in your computer.  If unsure say Y.
+
+config SYSVIPC
+	bool "System V IPC"
+	---help---
+	  Inter Process Communication is a suite of library functions and
+	  system calls which let processes (running programs) synchronize and
+	  exchange information. It is generally considered to be a good thing,
+	  and some programs won't run unless you say Y here. In particular, if
+	  you want to run the DOS emulator dosemu under Linux (read the
+	  DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
+	  you'll need to say Y here.
+
+	  You can find documentation about IPC with "info ipc" and also in
+	  section 6.4 of the Linux Programmer's Guide, available from
+	  <http://www.tldp.org/guides.html>.
+
+config SYSVIPC_SYSCTL
+	bool
+	depends on SYSVIPC
+	depends on SYSCTL
+	default y
+
+config POSIX_MQUEUE
+	bool "POSIX Message Queues"
+	depends on NET
+	---help---
+	  POSIX variant of message queues is a part of IPC. In POSIX message
+	  queues every message has a priority which decides about succession
+	  of receiving it by a process. If you want to compile and run
+	  programs written e.g. for Solaris with use of its POSIX message
+	  queues (functions mq_*) say Y here.
+
+	  POSIX message queues are visible as a filesystem called 'mqueue'
+	  and can be mounted somewhere if you want to do filesystem
+	  operations on message queues.
+
+	  If unsure, say Y.
+
+config POSIX_MQUEUE_SYSCTL
+	bool
+	depends on POSIX_MQUEUE
+	depends on SYSCTL
+	default y
+
+config KDBUS
+	tristate "kdbus interprocess communication"
+	depends on TMPFS
+	help
+	  D-Bus is a system for low-latency, low-overhead, easy to use
+	  interprocess communication (IPC).
+
+	  See the man-pages and HTML files in Documentation/kdbus/
+	  that are generated by 'make mandocs' and 'make htmldocs'.
+
+	  If you have an ordinary machine, select M here. The module
+	  will be called kdbus.
+
+config CROSS_MEMORY_ATTACH
+	bool "Enable process_vm_readv/writev syscalls"
+	depends on MMU
+	default y
+	help
+	  Enabling this option adds the system calls process_vm_readv and
+	  process_vm_writev which allow a process with the correct privileges
+	  to directly read from or write to another process' address space.
+	  See the man page for more details.
+
+config FHANDLE
+	bool "open by fhandle syscalls"
+	select EXPORTFS
+	help
+	  If you say Y here, a user level program will be able to map
+	  file names to handle and then later use the handle for
+	  different file system operations. This is useful in implementing
+	  userspace file servers, which now track files using handles instead
+	  of names. The handle would remain the same even if file names
+	  get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
+	  syscalls.
+
+config USELIB
+	bool "uselib syscall"
+	default y
+	help
+	  This option enables the uselib syscall, a system call used in the
+	  dynamic linker from libc5 and earlier.  glibc does not use this
+	  system call.  If you intend to run programs built on libc5 or
+	  earlier, you may need to enable this syscall.  Current systems
+	  running glibc can safely disable this.
+
+config AUDIT
+	bool "Auditing support"
+	depends on NET
+	help
+	  Enable auditing infrastructure that can be used with another
+	  kernel subsystem, such as SELinux (which requires this for
+	  logging of avc messages output).  Does not do system-call
+	  auditing without CONFIG_AUDITSYSCALL.
+
+config HAVE_ARCH_AUDITSYSCALL
+	bool
+
+config AUDITSYSCALL
+	bool "Enable system-call auditing support"
+	depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
+	default y if SECURITY_SELINUX
+	help
+	  Enable low-overhead system-call auditing infrastructure that
+	  can be used independently or with another kernel subsystem,
+	  such as SELinux.
+
+config AUDIT_WATCH
+	def_bool y
+	depends on AUDITSYSCALL
+	select FSNOTIFY
+
+config AUDIT_TREE
+	def_bool y
+	depends on AUDITSYSCALL
+	select FSNOTIFY
+
+source "kernel/irq/Kconfig"
+source "kernel/time/Kconfig"
+
+menu "CPU/Task time and stats accounting"
+
+config VIRT_CPU_ACCOUNTING
+	bool
+
+choice
+	prompt "Cputime accounting"
+	default TICK_CPU_ACCOUNTING if !PPC64
+	default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
+
+# Kind of a stub config for the pure tick based cputime accounting
+config TICK_CPU_ACCOUNTING
+	bool "Simple tick based cputime accounting"
+	depends on !S390 && !NO_HZ_FULL && !SCHED_BFS
+	help
+	  This is the basic tick based cputime accounting that maintains
+	  statistics about user, system and idle time spent on per jiffies
+	  granularity.
+
+	  If unsure, say Y.
+
+config VIRT_CPU_ACCOUNTING_NATIVE
+	bool "Deterministic task and CPU time accounting"
+	depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
+	select VIRT_CPU_ACCOUNTING
+	help
+	  Select this option to enable more accurate task and CPU time
+	  accounting.  This is done by reading a CPU counter on each
+	  kernel entry and exit and on transitions within the kernel
+	  between system, softirq and hardirq state, so there is a
+	  small performance impact.  In the case of s390 or IBM POWER > 5,
+	  this also enables accounting of stolen time on logically-partitioned
+	  systems.
+
+config VIRT_CPU_ACCOUNTING_GEN
+	bool "Full dynticks CPU time accounting"
+	depends on HAVE_CONTEXT_TRACKING
+	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
+	depends on !SCHED_BFS
+	select VIRT_CPU_ACCOUNTING
+	select CONTEXT_TRACKING
+	help
+	  Select this option to enable task and CPU time accounting on full
+	  dynticks systems. This accounting is implemented by watching every
+	  kernel-user boundaries using the context tracking subsystem.
+	  The accounting is thus performed at the expense of some significant
+	  overhead.
+
+	  For now this is only useful if you are working on the full
+	  dynticks subsystem development.
+
+	  If unsure, say N.
+
+config IRQ_TIME_ACCOUNTING
+	bool "Fine granularity task level IRQ time accounting"
+	depends on HAVE_IRQ_TIME_ACCOUNTING && !NO_HZ_FULL
+	help
+	  Select this option to enable fine granularity task irq time
+	  accounting. This is done by reading a timestamp on each
+	  transitions between softirq and hardirq state, so there can be a
+	  small performance impact.
+
+	  If in doubt, say N here.
+
+endchoice
+
+config BSD_PROCESS_ACCT
+	bool "BSD Process Accounting"
+	depends on MULTIUSER
+	help
+	  If you say Y here, a user level program will be able to instruct the
+	  kernel (via a special system call) to write process accounting
+	  information to a file: whenever a process exits, information about
+	  that process will be appended to the file by the kernel.  The
+	  information includes things such as creation time, owning user,
+	  command name, memory usage, controlling terminal etc. (the complete
+	  list is in the struct acct in <file:include/linux/acct.h>).  It is
+	  up to the user level program to do useful things with this
+	  information.  This is generally a good idea, so say Y.
+
+config BSD_PROCESS_ACCT_V3
+	bool "BSD Process Accounting version 3 file format"
+	depends on BSD_PROCESS_ACCT
+	default n
+	help
+	  If you say Y here, the process accounting information is written
+	  in a new file format that also logs the process IDs of each
+	  process and it's parent. Note that this file format is incompatible
+	  with previous v0/v1/v2 file formats, so you will need updated tools
+	  for processing it. A preliminary version of these tools is available
+	  at <http://www.gnu.org/software/acct/>.
+
+config TASKSTATS
+	bool "Export task/process statistics through netlink"
+	depends on NET
+	depends on MULTIUSER
+	default n
+	help
+	  Export selected statistics for tasks/processes through the
+	  generic netlink interface. Unlike BSD process accounting, the
+	  statistics are available during the lifetime of tasks/processes as
+	  responses to commands. Like BSD accounting, they are sent to user
+	  space on task exit.
+
+	  Say N if unsure.
+
+config TASK_DELAY_ACCT
+	bool "Enable per-task delay accounting"
+	depends on TASKSTATS
+	help
+	  Collect information on time spent by a task waiting for system
+	  resources like cpu, synchronous block I/O completion and swapping
+	  in pages. Such statistics can help in setting a task's priorities
+	  relative to other tasks for cpu, io, rss limits etc.
+
+	  Say N if unsure.
+
+config TASK_XACCT
+	bool "Enable extended accounting over taskstats"
+	depends on TASKSTATS
+	help
+	  Collect extended task accounting data and send the data
+	  to userland for processing over the taskstats interface.
+
+	  Say N if unsure.
+
+config TASK_IO_ACCOUNTING
+	bool "Enable per-task storage I/O accounting"
+	depends on TASK_XACCT
+	help
+	  Collect information on the number of bytes of storage I/O which this
+	  task has caused.
+
+	  Say N if unsure.
+
+endmenu # "CPU/Task time and stats accounting"
+
+menu "RCU Subsystem"
+
+choice
+	prompt "RCU Implementation"
+	default TREE_RCU
+
+config TREE_RCU
+	bool "Tree-based hierarchical RCU"
+	depends on !PREEMPT && SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP system with hundreds or
+	  thousands of CPUs.  It also scales down nicely to
+	  smaller systems.
+
+config PREEMPT_RCU
+	bool "Preemptible tree-based hierarchical RCU"
+	depends on PREEMPT
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP systems with hundreds or
+	  thousands of CPUs, but for which real-time response
+	  is also required.  It also scales down nicely to
+	  smaller systems.
+
+	  Select this option if you are unsure.
+
+config TINY_RCU
+	bool "UP-only small-memory-footprint RCU"
+	depends on !PREEMPT && !SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for UP systems from which real-time response
+	  is not required.  This option greatly reduces the
+	  memory footprint of RCU.
+
+endchoice
+
+config SRCU
+	bool
+	help
+	  This option selects the sleepable version of RCU. This version
+	  permits arbitrary sleeping or blocking within RCU read-side critical
+	  sections.
+
+config TASKS_RCU
+	bool "Task_based RCU implementation using voluntary context switch"
+	default n
+	select SRCU
+	help
+	  This option enables a task-based RCU implementation that uses
+	  only voluntary context switch (not preemption!), idle, and
+	  user-mode execution as quiescent states.
+
+	  If unsure, say N.
+
+config RCU_STALL_COMMON
+	def_bool ( TREE_RCU || PREEMPT_RCU || RCU_TRACE )
+	help
+	  This option enables RCU CPU stall code that is common between
+	  the TINY and TREE variants of RCU.  The purpose is to allow
+	  the tiny variants to disable RCU CPU stall warnings, while
+	  making these warnings mandatory for the tree variants.
+
+config CONTEXT_TRACKING
+       bool
+
+config RCU_USER_QS
+	bool "Consider userspace as in RCU extended quiescent state"
+	depends on HAVE_CONTEXT_TRACKING && SMP && !SCHED_BFS
+	select CONTEXT_TRACKING
+	help
+	  This option sets hooks on kernel / userspace boundaries and
+	  puts RCU in extended quiescent state when the CPU runs in
+	  userspace. It means that when a CPU runs in userspace, it is
+	  excluded from the global RCU state machine and thus doesn't
+	  try to keep the timer tick on for RCU.
+
+	  Unless you want to hack and help the development of the full
+	  dynticks mode, you shouldn't enable this option.  It also
+	  adds unnecessary overhead.
+
+	  If unsure say N
+
+config CONTEXT_TRACKING_FORCE
+	bool "Force context tracking"
+	depends on CONTEXT_TRACKING
+	default y if !NO_HZ_FULL
+	help
+	  The major pre-requirement for full dynticks to work is to
+	  support the context tracking subsystem. But there are also
+	  other dependencies to provide in order to make the full
+	  dynticks working.
+
+	  This option stands for testing when an arch implements the
+	  context tracking backend but doesn't yet fullfill all the
+	  requirements to make the full dynticks feature working.
+	  Without the full dynticks, there is no way to test the support
+	  for context tracking and the subsystems that rely on it: RCU
+	  userspace extended quiescent state and tickless cputime
+	  accounting. This option copes with the absence of the full
+	  dynticks subsystem by forcing the context tracking on all
+	  CPUs in the system.
+
+	  Say Y only if you're working on the development of an
+	  architecture backend for the context tracking.
+
+	  Say N otherwise, this option brings an overhead that you
+	  don't want in production.
+
+
+config RCU_FANOUT
+	int "Tree-based hierarchical RCU fanout value"
+	range 2 64 if 64BIT
+	range 2 32 if !64BIT
+	depends on TREE_RCU || PREEMPT_RCU
+	default 64 if 64BIT
+	default 32 if !64BIT
+	help
+	  This option controls the fanout of hierarchical implementations
+	  of RCU, allowing RCU to work efficiently on machines with
+	  large numbers of CPUs.  This value must be at least the fourth
+	  root of NR_CPUS, which allows NR_CPUS to be insanely large.
+	  The default value of RCU_FANOUT should be used for production
+	  systems, but if you are stress-testing the RCU implementation
+	  itself, small RCU_FANOUT values allow you to test large-system
+	  code paths on small(er) systems.
+
+	  Select a specific number if testing RCU itself.
+	  Take the default if unsure.
+
+config RCU_FANOUT_LEAF
+	int "Tree-based hierarchical RCU leaf-level fanout value"
+	range 2 RCU_FANOUT if 64BIT
+	range 2 RCU_FANOUT if !64BIT
+	depends on TREE_RCU || PREEMPT_RCU
+	default 16
+	help
+	  This option controls the leaf-level fanout of hierarchical
+	  implementations of RCU, and allows trading off cache misses
+	  against lock contention.  Systems that synchronize their
+	  scheduling-clock interrupts for energy-efficiency reasons will
+	  want the default because the smaller leaf-level fanout keeps
+	  lock contention levels acceptably low.  Very large systems
+	  (hundreds or thousands of CPUs) will instead want to set this
+	  value to the maximum value possible in order to reduce the
+	  number of cache misses incurred during RCU's grace-period
+	  initialization.  These systems tend to run CPU-bound, and thus
+	  are not helped by synchronized interrupts, and thus tend to
+	  skew them, which reduces lock contention enough that large
+	  leaf-level fanouts work well.
+
+	  Select a specific number if testing RCU itself.
+
+	  Select the maximum permissible value for large systems.
+
+	  Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+	bool "Disable tree-based hierarchical RCU auto-balancing"
+	depends on TREE_RCU || PREEMPT_RCU
+	default n
+	help
+	  This option forces use of the exact RCU_FANOUT value specified,
+	  regardless of imbalances in the hierarchy.  This is useful for
+	  testing RCU itself, and might one day be useful on systems with
+	  strong NUMA behavior.
+
+	  Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+	  Say N if unsure.
+
+config RCU_FAST_NO_HZ
+	bool "Accelerate last non-dyntick-idle CPU's grace periods"
+	depends on NO_HZ_COMMON && SMP
+	default n
+	help
+	  This option permits CPUs to enter dynticks-idle state even if
+	  they have RCU callbacks queued, and prevents RCU from waking
+	  these CPUs up more than roughly once every four jiffies (by
+	  default, you can adjust this using the rcutree.rcu_idle_gp_delay
+	  parameter), thus improving energy efficiency.  On the other
+	  hand, this option increases the duration of RCU grace periods,
+	  for example, slowing down synchronize_rcu().
+
+	  Say Y if energy efficiency is critically important, and you
+	  	don't care about increased grace-period durations.
+
+	  Say N if you are unsure.
+
+config TREE_RCU_TRACE
+	def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
+	select DEBUG_FS
+	help
+	  This option provides tracing for the TREE_RCU and
+	  PREEMPT_RCU implementations, permitting Makefile to
+	  trivially select kernel/rcutree_trace.c.
+
+config RCU_BOOST
+	bool "Enable RCU priority boosting"
+	depends on RT_MUTEXES && PREEMPT_RCU
+	default n
+	help
+	  This option boosts the priority of preempted RCU readers that
+	  block the current preemptible RCU grace period for too long.
+	  This option also prevents heavy loads from blocking RCU
+	  callback invocation for all flavors of RCU.
+
+	  Say Y here if you are working with real-time apps or heavy loads
+	  Say N here if you are unsure.
+
+config RCU_KTHREAD_PRIO
+	int "Real-time priority to use for RCU worker threads"
+	range 1 99 if RCU_BOOST
+	range 0 99 if !RCU_BOOST
+	default 1 if RCU_BOOST
+	default 0 if !RCU_BOOST
+	help
+	  This option specifies the SCHED_FIFO priority value that will be
+	  assigned to the rcuc/n and rcub/n threads and is also the value
+	  used for RCU_BOOST (if enabled). If you are working with a
+	  real-time application that has one or more CPU-bound threads
+	  running at a real-time priority level, you should set
+	  RCU_KTHREAD_PRIO to a priority higher than the highest-priority
+	  real-time CPU-bound application thread.  The default RCU_KTHREAD_PRIO
+	  value of 1 is appropriate in the common case, which is real-time
+	  applications that do not have any CPU-bound threads.
+
+	  Some real-time applications might not have a single real-time
+	  thread that saturates a given CPU, but instead might have
+	  multiple real-time threads that, taken together, fully utilize
+	  that CPU.  In this case, you should set RCU_KTHREAD_PRIO to
+	  a priority higher than the lowest-priority thread that is
+	  conspiring to prevent the CPU from running any non-real-time
+	  tasks.  For example, if one thread at priority 10 and another
+	  thread at priority 5 are between themselves fully consuming
+	  the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
+	  set to priority 6 or higher.
+
+	  Specify the real-time priority, or take the default if unsure.
+
+config RCU_BOOST_DELAY
+	int "Milliseconds to delay boosting after RCU grace-period start"
+	range 0 3000
+	depends on RCU_BOOST
+	default 500
+	help
+	  This option specifies the time to wait after the beginning of
+	  a given grace period before priority-boosting preempted RCU
+	  readers blocking that grace period.  Note that any RCU reader
+	  blocking an expedited RCU grace period is boosted immediately.
+
+	  Accept the default if unsure.
+
+config RCU_NOCB_CPU
+	bool "Offload RCU callback processing from boot-selected CPUs"
+	depends on (TREE_RCU || TREE_PREEMPT_RCU) && !SCHED_BFS
+	default n
+	help
+	  Use this option to reduce OS jitter for aggressive HPC or
+	  real-time workloads.	It can also be used to offload RCU
+	  callback invocation to energy-efficient CPUs in battery-powered
+	  asymmetric multiprocessors.
+
+	  This option offloads callback invocation from the set of
+	  CPUs specified at boot time by the rcu_nocbs parameter.
+	  For each such CPU, a kthread ("rcuox/N") will be created to
+	  invoke callbacks, where the "N" is the CPU being offloaded,
+	  and where the "x" is "b" for RCU-bh, "p" for RCU-preempt, and
+	  "s" for RCU-sched.  Nothing prevents this kthread from running
+	  on the specified CPUs, but (1) the kthreads may be preempted
+	  between each callback, and (2) affinity or cgroups can be used
+	  to force the kthreads to run on whatever set of CPUs is desired.
+
+	  Say Y here if you want to help to debug reduced OS jitter.
+	  Say N here if you are unsure.
+
+choice
+	prompt "Build-forced no-CBs CPUs"
+	default RCU_NOCB_CPU_NONE
+	depends on RCU_NOCB_CPU
+	help
+	  This option allows no-CBs CPUs (whose RCU callbacks are invoked
+	  from kthreads rather than from softirq context) to be specified
+	  at build time.  Additional no-CBs CPUs may be specified by
+	  the rcu_nocbs= boot parameter.
+
+config RCU_NOCB_CPU_NONE
+	bool "No build_forced no-CBs CPUs"
+	help
+	  This option does not force any of the CPUs to be no-CBs CPUs.
+	  Only CPUs designated by the rcu_nocbs= boot parameter will be
+	  no-CBs CPUs, whose RCU callbacks will be invoked by per-CPU
+	  kthreads whose names begin with "rcuo".  All other CPUs will
+	  invoke their own RCU callbacks in softirq context.
+
+	  Select this option if you want to choose no-CBs CPUs at
+	  boot time, for example, to allow testing of different no-CBs
+	  configurations without having to rebuild the kernel each time.
+
+config RCU_NOCB_CPU_ZERO
+	bool "CPU 0 is a build_forced no-CBs CPU"
+	help
+	  This option forces CPU 0 to be a no-CBs CPU, so that its RCU
+	  callbacks are invoked by a per-CPU kthread whose name begins
+	  with "rcuo".	Additional CPUs may be designated as no-CBs
+	  CPUs using the rcu_nocbs= boot parameter will be no-CBs CPUs.
+	  All other CPUs will invoke their own RCU callbacks in softirq
+	  context.
+
+	  Select this if CPU 0 needs to be a no-CBs CPU for real-time
+	  or energy-efficiency reasons, but the real reason it exists
+	  is to ensure that randconfig testing covers mixed systems.
+
+config RCU_NOCB_CPU_ALL
+	bool "All CPUs are build_forced no-CBs CPUs"
+	help
+	  This option forces all CPUs to be no-CBs CPUs.  The rcu_nocbs=
+	  boot parameter will be ignored.  All CPUs' RCU callbacks will
+	  be executed in the context of per-CPU rcuo kthreads created for
+	  this purpose.  Assuming that the kthreads whose names start with
+	  "rcuo" are bound to "housekeeping" CPUs, this reduces OS jitter
+	  on the remaining CPUs, but might decrease memory locality during
+	  RCU-callback invocation, thus potentially degrading throughput.
+
+	  Select this if all CPUs need to be no-CBs CPUs for real-time
+	  or energy-efficiency reasons.
+
+endchoice
+
+config RCU_EXPEDITE_BOOT
+	bool
+	default n
+	help
+	  This option enables expedited grace periods at boot time,
+	  as if rcu_expedite_gp() had been invoked early in boot.
+	  The corresponding rcu_unexpedite_gp() is invoked from
+	  rcu_end_inkernel_boot(), which is intended to be invoked
+	  at the end of the kernel-only boot sequence, just before
+	  init is exec'ed.
+
+	  Accept the default if unsure.
+
+endmenu # "RCU Subsystem"
+
+config BUILD_BIN2C
+	bool
+	default n
+
+config IKCONFIG
+	tristate "Kernel .config support"
+	select BUILD_BIN2C
+	---help---
+	  This option enables the complete Linux kernel ".config" file
+	  contents to be saved in the kernel. It provides documentation
+	  of which kernel options are used in a running kernel or in an
+	  on-disk kernel.  This information can be extracted from the kernel
+	  image file with the script scripts/extract-ikconfig and used as
+	  input to rebuild the current kernel or to build another kernel.
+	  It can also be extracted from a running kernel by reading
+	  /proc/config.gz if enabled (below).
+
+config IKCONFIG_PROC
+	bool "Enable access to .config through /proc/config.gz"
+	depends on IKCONFIG && PROC_FS
+	---help---
+	  This option enables access to the kernel configuration file
+	  through /proc/config.gz.
+
+config LOG_BUF_SHIFT
+	int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
+	range 12 21
+	default 17
+	depends on PRINTK
+	help
+	  Select the minimal kernel log buffer size as a power of 2.
+	  The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
+	  parameter, see below. Any higher size also might be forced
+	  by "log_buf_len" boot parameter.
+
+	  Examples:
+		     17 => 128 KB
+		     16 => 64 KB
+		     15 => 32 KB
+		     14 => 16 KB
+		     13 =>  8 KB
+		     12 =>  4 KB
+
+config LOG_CPU_MAX_BUF_SHIFT
+	int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
+	depends on SMP
+	range 0 21
+	default 12 if !BASE_SMALL
+	default 0 if BASE_SMALL
+	depends on PRINTK
+	help
+	  This option allows to increase the default ring buffer size
+	  according to the number of CPUs. The value defines the contribution
+	  of each CPU as a power of 2. The used space is typically only few
+	  lines however it might be much more when problems are reported,
+	  e.g. backtraces.
+
+	  The increased size means that a new buffer has to be allocated and
+	  the original static one is unused. It makes sense only on systems
+	  with more CPUs. Therefore this value is used only when the sum of
+	  contributions is greater than the half of the default kernel ring
+	  buffer as defined by LOG_BUF_SHIFT. The default values are set
+	  so that more than 64 CPUs are needed to trigger the allocation.
+
+	  Also this option is ignored when "log_buf_len" kernel parameter is
+	  used as it forces an exact (power of two) size of the ring buffer.
+
+	  The number of possible CPUs is used for this computation ignoring
+	  hotplugging making the compuation optimal for the the worst case
+	  scenerio while allowing a simple algorithm to be used from bootup.
+
+	  Examples shift values and their meaning:
+		     17 => 128 KB for each CPU
+		     16 =>  64 KB for each CPU
+		     15 =>  32 KB for each CPU
+		     14 =>  16 KB for each CPU
+		     13 =>   8 KB for each CPU
+		     12 =>   4 KB for each CPU
+
+#
+# Architectures with an unreliable sched_clock() should select this:
+#
+config HAVE_UNSTABLE_SCHED_CLOCK
+	bool
+
+config GENERIC_SCHED_CLOCK
+	bool
+
+#
+# For architectures that want to enable the support for NUMA-affine scheduler
+# balancing logic:
+#
+config ARCH_SUPPORTS_NUMA_BALANCING
+	bool
+
+#
+# For architectures that know their GCC __int128 support is sound
+#
+config ARCH_SUPPORTS_INT128
+	bool
+
+# For architectures that (ab)use NUMA to represent different memory regions
+# all cpu-local but of different latencies, such as SuperH.
+#
+config ARCH_WANT_NUMA_VARIABLE_LOCALITY
+	bool
+
+config NUMA_BALANCING
+	bool "Memory placement aware NUMA scheduler"
+	depends on ARCH_SUPPORTS_NUMA_BALANCING
+	depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
+	depends on SMP && NUMA && MIGRATION
+	depends on !SCHED_BFS
+	help
+	  This option adds support for automatic NUMA aware memory/task placement.
+	  The mechanism is quite primitive and is based on migrating memory when
+	  it has references to the node the task is running on.
+
+	  This system will be inactive on UMA systems.
+
+config NUMA_BALANCING_DEFAULT_ENABLED
+	bool "Automatically enable NUMA aware memory/task placement"
+	default y
+	depends on NUMA_BALANCING
+	help
+	  If set, automatic NUMA balancing will be enabled if running on a NUMA
+	  machine.
+
+menuconfig CGROUPS
+	bool "Control Group support"
+	select KERNFS
+	help
+	  This option adds support for grouping sets of processes together, for
+	  use with process control subsystems such as Cpusets, CFS, memory
+	  controls or device isolation.
+	  See
+		- Documentation/scheduler/sched-design-CFS.txt	(CFS)
+		- Documentation/cgroups/ (features for grouping, isolation
+					  and resource control)
+
+	  Say N if unsure.
+
+if CGROUPS
+
+config CGROUP_DEBUG
+	bool "Example debug cgroup subsystem"
+	default n
+	help
+	  This option enables a simple cgroup subsystem that
+	  exports useful debugging information about the cgroups
+	  framework.
+
+	  Say N if unsure.
+
+config CGROUP_FREEZER
+	bool "Freezer cgroup subsystem"
+	help
+	  Provides a way to freeze and unfreeze all tasks in a
+	  cgroup.
+
+config CGROUP_DEVICE
+	bool "Device controller for cgroups"
+	help
+	  Provides a cgroup implementing whitelists for devices which
+	  a process in the cgroup can mknod or open.
+
+config CPUSETS
+	bool "Cpuset support"
+	help
+	  This option will let you create and manage CPUSETs which
+	  allow dynamically partitioning a system into sets of CPUs and
+	  Memory Nodes and assigning tasks to run only within those sets.
+	  This is primarily useful on large SMP or NUMA systems.
+
+	  Say N if unsure.
+
+config PROC_PID_CPUSET
+	bool "Include legacy /proc/<pid>/cpuset file"
+	depends on CPUSETS
+	default y
+
+config CGROUP_CPUACCT
+	bool "Simple CPU accounting cgroup subsystem"
+	depends on !SCHED_BFS
+	help
+	  Provides a simple Resource Controller for monitoring the
+	  total CPU consumed by the tasks in a cgroup.
+
+config PAGE_COUNTER
+       bool
+
+config MEMCG
+	bool "Memory Resource Controller for Control Groups"
+	select PAGE_COUNTER
+	select EVENTFD
+	help
+	  Provides a memory resource controller that manages both anonymous
+	  memory and page cache. (See Documentation/cgroups/memory.txt)
+
+config MEMCG_SWAP
+	bool "Memory Resource Controller Swap Extension"
+	depends on MEMCG && SWAP
+	help
+	  Add swap management feature to memory resource controller. When you
+	  enable this, you can limit mem+swap usage per cgroup. In other words,
+	  when you disable this, memory resource controller has no cares to
+	  usage of swap...a process can exhaust all of the swap. This extension
+	  is useful when you want to avoid exhaustion swap but this itself
+	  adds more overheads and consumes memory for remembering information.
+	  Especially if you use 32bit system or small memory system, please
+	  be careful about enabling this. When memory resource controller
+	  is disabled by boot option, this will be automatically disabled and
+	  there will be no overhead from this. Even when you set this config=y,
+	  if boot option "swapaccount=0" is set, swap will not be accounted.
+	  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
+	  size is 4096bytes, 512k per 1Gbytes of swap.
+config MEMCG_SWAP_ENABLED
+	bool "Memory Resource Controller Swap Extension enabled by default"
+	depends on MEMCG_SWAP
+	default y
+	help
+	  Memory Resource Controller Swap Extension comes with its price in
+	  a bigger memory consumption. General purpose distribution kernels
+	  which want to enable the feature but keep it disabled by default
+	  and let the user enable it by swapaccount=1 boot command line
+	  parameter should have this option unselected.
+	  For those who want to have the feature enabled by default should
+	  select this option (if, for some reason, they need to disable it
+	  then swapaccount=0 does the trick).
+config MEMCG_KMEM
+	bool "Memory Resource Controller Kernel Memory accounting"
+	depends on MEMCG
+	depends on SLUB || SLAB
+	help
+	  The Kernel Memory extension for Memory Resource Controller can limit
+	  the amount of memory used by kernel objects in the system. Those are
+	  fundamentally different from the entities handled by the standard
+	  Memory Controller, which are page-based, and can be swapped. Users of
+	  the kmem extension can use it to guarantee that no group of processes
+	  will ever exhaust kernel resources alone.
+
+config CGROUP_HUGETLB
+	bool "HugeTLB Resource Controller for Control Groups"
+	depends on HUGETLB_PAGE
+	select PAGE_COUNTER
+	default n
+	help
+	  Provides a cgroup Resource Controller for HugeTLB pages.
+	  When you enable this, you can put a per cgroup limit on HugeTLB usage.
+	  The limit is enforced during page fault. Since HugeTLB doesn't
+	  support page reclaim, enforcing the limit at page fault time implies
+	  that, the application will get SIGBUS signal if it tries to access
+	  HugeTLB pages beyond its limit. This requires the application to know
+	  beforehand how much HugeTLB pages it would require for its use. The
+	  control group is tracked in the third page lru pointer. This means
+	  that we cannot use the controller with huge page less than 3 pages.
+
+config CGROUP_PERF
+	bool "Enable perf_event per-cpu per-container group (cgroup) monitoring"
+	depends on PERF_EVENTS && CGROUPS
+	help
+	  This option extends the per-cpu mode to restrict monitoring to
+	  threads which belong to the cgroup specified and run on the
+	  designated cpu.
+
+	  Say N if unsure.
+
+menuconfig CGROUP_SCHED
+	bool "Group CPU scheduler"
+	depends on !SCHED_BFS
+	default n
+	help
+	  This feature lets CPU scheduler recognize task groups and control CPU
+	  bandwidth allocation to such task groups. It uses cgroups to group
+	  tasks.
+
+if CGROUP_SCHED
+config FAIR_GROUP_SCHED
+	bool "Group scheduling for SCHED_OTHER"
+	depends on CGROUP_SCHED
+	default CGROUP_SCHED
+
+config CFS_BANDWIDTH
+	bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
+	depends on FAIR_GROUP_SCHED
+	default n
+	help
+	  This option allows users to define CPU bandwidth rates (limits) for
+	  tasks running within the fair group scheduler.  Groups with no limit
+	  set are considered to be unconstrained and will run with no
+	  restriction.
+	  See tip/Documentation/scheduler/sched-bwc.txt for more information.
+
+config RT_GROUP_SCHED
+	bool "Group scheduling for SCHED_RR/FIFO"
+	depends on CGROUP_SCHED
+	default n
+	help
+	  This feature lets you explicitly allocate real CPU bandwidth
+	  to task groups. If enabled, it will also make it impossible to
+	  schedule realtime tasks for non-root users until you allocate
+	  realtime bandwidth for them.
+	  See Documentation/scheduler/sched-rt-group.txt for more information.
+
+endif #CGROUP_SCHED
+
+config BLK_CGROUP
+	bool "Block IO controller"
+	depends on BLOCK
+	default n
+	---help---
+	Generic block IO controller cgroup interface. This is the common
+	cgroup interface which should be used by various IO controlling
+	policies.
+
+	Currently, CFQ IO scheduler uses it to recognize task groups and
+	control disk bandwidth allocation (proportional time slice allocation)
+	to such task groups. It is also used by bio throttling logic in
+	block layer to implement upper limit in IO rates on a device.
+
+	This option only enables generic Block IO controller infrastructure.
+	One needs to also enable actual IO controlling logic/policy. For
+	enabling proportional weight division of disk bandwidth in CFQ, set
+	CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
+	CONFIG_BLK_DEV_THROTTLING=y.
+
+	See Documentation/cgroups/blkio-controller.txt for more information.
+
+config DEBUG_BLK_CGROUP
+	bool "Enable Block IO controller debugging"
+	depends on BLK_CGROUP
+	default n
+	---help---
+	Enable some debugging help. Currently it exports additional stat
+	files in a cgroup which can be useful for debugging.
+
+endif # CGROUPS
+
+config CHECKPOINT_RESTORE
+	bool "Checkpoint/restore support"
+	default n
+	help
+	  Enables additional kernel features in a sake of checkpoint/restore.
+	  In particular it adds auxiliary prctl codes to setup process text,
+	  data and heap segment sizes, and a few additional /proc filesystem
+	  entries.
+
+	  If unsure, say N here.
+
+menuconfig NAMESPACES
+	bool "Namespaces support" if EXPERT
+	depends on MULTIUSER
+	default !EXPERT
+	help
+	  Provides the way to make tasks work with different objects using
+	  the same id. For example same IPC id may refer to different objects
+	  or same user id or pid may refer to different tasks when used in
+	  different namespaces.
+
+if NAMESPACES
+
+config UTS_NS
+	bool "UTS namespace"
+	default y
+	help
+	  In this namespace tasks see different info provided with the
+	  uname() system call
+
+config IPC_NS
+	bool "IPC namespace"
+	depends on (SYSVIPC || POSIX_MQUEUE)
+	default y
+	help
+	  In this namespace tasks work with IPC ids which correspond to
+	  different IPC objects in different namespaces.
+
+config USER_NS
+	bool "User namespace"
+	default n
+	help
+	  This allows containers, i.e. vservers, to use user namespaces
+	  to provide different user info for different servers.
+
+	  When user namespaces are enabled in the kernel it is
+	  recommended that the MEMCG and MEMCG_KMEM options also be
+	  enabled and that user-space use the memory control groups to
+	  limit the amount of memory a memory unprivileged users can
+	  use.
+
+	  If unsure, say N.
+
+config PID_NS
+	bool "PID Namespaces"
+	default y
+	help
+	  Support process id namespaces.  This allows having multiple
+	  processes with the same pid as long as they are in different
+	  pid namespaces.  This is a building block of containers.
+
+config NET_NS
+	bool "Network namespace"
+	depends on NET
+	default y
+	help
+	  Allow user space to create what appear to be multiple instances
+	  of the network stack.
+
+endif # NAMESPACES
+
+config SCHED_AUTOGROUP
+	bool "Automatic process group scheduling"
+	depends on !SCHED_BFS
+	select CGROUPS
+	select CGROUP_SCHED
+	select FAIR_GROUP_SCHED
+	help
+	  This option optimizes the scheduler for common desktop workloads by
+	  automatically creating and populating task groups.  This separation
+	  of workloads isolates aggressive CPU burners (like build jobs) from
+	  desktop applications.  Task group autogeneration is currently based
+	  upon task session.
+
+config SYSFS_DEPRECATED
+	bool "Enable deprecated sysfs features to support old userspace tools"
+	depends on SYSFS
+	default n
+	help
+	  This option adds code that switches the layout of the "block" class
+	  devices, to not show up in /sys/class/block/, but only in
+	  /sys/block/.
+
+	  This switch is only active when the sysfs.deprecated=1 boot option is
+	  passed or the SYSFS_DEPRECATED_V2 option is set.
+
+	  This option allows new kernels to run on old distributions and tools,
+	  which might get confused by /sys/class/block/. Since 2007/2008 all
+	  major distributions and tools handle this just fine.
+
+	  Recent distributions and userspace tools after 2009/2010 depend on
+	  the existence of /sys/class/block/, and will not work with this
+	  option enabled.
+
+	  Only if you are using a new kernel on an old distribution, you might
+	  need to say Y here.
+
+config SYSFS_DEPRECATED_V2
+	bool "Enable deprecated sysfs features by default"
+	default n
+	depends on SYSFS
+	depends on SYSFS_DEPRECATED
+	help
+	  Enable deprecated sysfs by default.
+
+	  See the CONFIG_SYSFS_DEPRECATED option for more details about this
+	  option.
+
+	  Only if you are using a new kernel on an old distribution, you might
+	  need to say Y here. Even then, odds are you would not need it
+	  enabled, you can always pass the boot option if absolutely necessary.
+
+config RELAY
+	bool "Kernel->user space relay support (formerly relayfs)"
+	help
+	  This option enables support for relay interface support in
+	  certain file systems (such as debugfs).
+	  It is designed to provide an efficient mechanism for tools and
+	  facilities to relay large amounts of data from kernel space to
+	  user space.
+
+	  If unsure, say N.
+
+config BLK_DEV_INITRD
+	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+	depends on BROKEN || !FRV
+	help
+	  The initial RAM filesystem is a ramfs which is loaded by the
+	  boot loader (loadlin or lilo) and that is mounted as root
+	  before the normal boot procedure. It is typically used to
+	  load modules needed to mount the "real" root file system,
+	  etc. See <file:Documentation/initrd.txt> for details.
+
+	  If RAM disk support (BLK_DEV_RAM) is also included, this
+	  also enables initial RAM disk (initrd) support and adds
+	  15 Kbytes (more on some other architectures) to the kernel size.
+
+	  If unsure say Y.
+
+if BLK_DEV_INITRD
+
+source "usr/Kconfig"
+
+endif
+
+config CC_OPTIMIZE_FOR_SIZE
+	bool "Optimize for size"
+	help
+	  Enabling this option will pass "-Os" instead of "-O2" to
+	  your compiler resulting in a smaller kernel.
+
+	  If unsure, say N.
+
+config SYSCTL
+	bool
+
+config ANON_INODES
+	bool
+
+config HAVE_UID16
+	bool
+
+config SYSCTL_EXCEPTION_TRACE
+	bool
+	help
+	  Enable support for /proc/sys/debug/exception-trace.
+
+config SYSCTL_ARCH_UNALIGN_NO_WARN
+	bool
+	help
+	  Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
+	  Allows arch to define/use @no_unaligned_warning to possibly warn
+	  about unaligned access emulation going on under the hood.
+
+config SYSCTL_ARCH_UNALIGN_ALLOW
+	bool
+	help
+	  Enable support for /proc/sys/kernel/unaligned-trap
+	  Allows arches to define/use @unaligned_enabled to runtime toggle
+	  the unaligned access emulation.
+	  see arch/parisc/kernel/unaligned.c for reference
+
+config HAVE_PCSPKR_PLATFORM
+	bool
+
+# interpreter that classic socket filters depend on
+config BPF
+	bool
+
+menuconfig EXPERT
+	bool "Configure standard kernel features (expert users)"
+	# Unhide debug options, to make the on-by-default options visible
+	select DEBUG_KERNEL
+	help
+	  This option allows certain base kernel options and settings
+          to be disabled or tweaked. This is for specialized
+          environments which can tolerate a "non-standard" kernel.
+          Only use this if you really know what you are doing.
+
+config UID16
+	bool "Enable 16-bit UID system calls" if EXPERT
+	depends on HAVE_UID16 && MULTIUSER
+	default y
+	help
+	  This enables the legacy 16-bit UID syscall wrappers.
+
+config MULTIUSER
+	bool "Multiple users, groups and capabilities support" if EXPERT
+	default y
+	help
+	  This option enables support for non-root users, groups and
+	  capabilities.
+
+	  If you say N here, all processes will run with UID 0, GID 0, and all
+	  possible capabilities.  Saying N here also compiles out support for
+	  system calls related to UIDs, GIDs, and capabilities, such as setuid,
+	  setgid, and capset.
+
+	  If unsure, say Y here.
+
+config SGETMASK_SYSCALL
+	bool "sgetmask/ssetmask syscalls support" if EXPERT
+	def_bool PARISC || MN10300 || BLACKFIN || M68K || PPC || MIPS || X86 || SPARC || CRIS || MICROBLAZE || SUPERH
+	---help---
+	  sys_sgetmask and sys_ssetmask are obsolete system calls
+	  no longer supported in libc but still enabled by default in some
+	  architectures.
+
+	  If unsure, leave the default option here.
+
+config SYSFS_SYSCALL
+	bool "Sysfs syscall support" if EXPERT
+	default y
+	---help---
+	  sys_sysfs is an obsolete system call no longer supported in libc.
+	  Note that disabling this option is more secure but might break
+	  compatibility with some systems.
+
+	  If unsure say Y here.
+
+config SYSCTL_SYSCALL
+	bool "Sysctl syscall support" if EXPERT
+	depends on PROC_SYSCTL
+	default n
+	select SYSCTL
+	---help---
+	  sys_sysctl uses binary paths that have been found challenging
+	  to properly maintain and use.  The interface in /proc/sys
+	  using paths with ascii names is now the primary path to this
+	  information.
+
+	  Almost nothing using the binary sysctl interface so if you are
+	  trying to save some space it is probably safe to disable this,
+	  making your kernel marginally smaller.
+
+	  If unsure say N here.
+
+config KALLSYMS
+	 bool "Load all symbols for debugging/ksymoops" if EXPERT
+	 default y
+	 help
+	   Say Y here to let the kernel print out symbolic crash information and
+	   symbolic stack backtraces. This increases the size of the kernel
+	   somewhat, as all symbols have to be loaded into the kernel image.
+
+config KALLSYMS_ALL
+	bool "Include all symbols in kallsyms"
+	depends on DEBUG_KERNEL && KALLSYMS
+	help
+	   Normally kallsyms only contains the symbols of functions for nicer
+	   OOPS messages and backtraces (i.e., symbols from the text and inittext
+	   sections). This is sufficient for most cases. And only in very rare
+	   cases (e.g., when a debugger is used) all symbols are required (e.g.,
+	   names of variables from the data sections, etc).
+
+	   This option makes sure that all symbols are loaded into the kernel
+	   image (i.e., symbols from all sections) in cost of increased kernel
+	   size (depending on the kernel configuration, it may be 300KiB or
+	   something like this).
+
+	   Say N unless you really need all symbols.
+
+config PRINTK
+	default y
+	bool "Enable support for printk" if EXPERT
+	select IRQ_WORK
+	help
+	  This option enables normal printk support. Removing it
+	  eliminates most of the message strings from the kernel image
+	  and makes the kernel more or less silent. As this makes it
+	  very difficult to diagnose system problems, saying N here is
+	  strongly discouraged.
+
+config BUG
+	bool "BUG() support" if EXPERT
+	default y
+	help
+          Disabling this option eliminates support for BUG and WARN, reducing
+          the size of your kernel image and potentially quietly ignoring
+          numerous fatal conditions. You should only consider disabling this
+          option for embedded systems with no facilities for reporting errors.
+          Just say Y.
+
+config ELF_CORE
+	depends on COREDUMP
+	default y
+	bool "Enable ELF core dumps" if EXPERT
+	help
+	  Enable support for generating core dumps. Disabling saves about 4k.
+
+
+config PCSPKR_PLATFORM
+	bool "Enable PC-Speaker support" if EXPERT
+	depends on HAVE_PCSPKR_PLATFORM
+	select I8253_LOCK
+	default y
+	help
+          This option allows to disable the internal PC-Speaker
+          support, saving some memory.
+
+config BASE_FULL
+	default y
+	bool "Enable full-sized data structures for core" if EXPERT
+	help
+	  Disabling this option reduces the size of miscellaneous core
+	  kernel data structures. This saves memory on small machines,
+	  but may reduce performance.
+
+config FUTEX
+	bool "Enable futex support" if EXPERT
+	default y
+	select RT_MUTEXES
+	help
+	  Disabling this option will cause the kernel to be built without
+	  support for "fast userspace mutexes".  The resulting kernel may not
+	  run glibc-based applications correctly.
+
+config HAVE_FUTEX_CMPXCHG
+	bool
+	depends on FUTEX
+	help
+	  Architectures should select this if futex_atomic_cmpxchg_inatomic()
+	  is implemented and always working. This removes a couple of runtime
+	  checks.
+
+config EPOLL
+	bool "Enable eventpoll support" if EXPERT
+	default y
+	select ANON_INODES
+	help
+	  Disabling this option will cause the kernel to be built without
+	  support for epoll family of system calls.
+
+config SIGNALFD
+	bool "Enable signalfd() system call" if EXPERT
+	select ANON_INODES
+	default y
+	help
+	  Enable the signalfd() system call that allows to receive signals
+	  on a file descriptor.
+
+	  If unsure, say Y.
+
+config TIMERFD
+	bool "Enable timerfd() system call" if EXPERT
+	select ANON_INODES
+	default y
+	help
+	  Enable the timerfd() system call that allows to receive timer
+	  events on a file descriptor.
+
+	  If unsure, say Y.
+
+config EVENTFD
+	bool "Enable eventfd() system call" if EXPERT
+	select ANON_INODES
+	default y
+	help
+	  Enable the eventfd() system call that allows to receive both
+	  kernel notification (ie. KAIO) or userspace notifications.
+
+	  If unsure, say Y.
+
+# syscall, maps, verifier
+config BPF_SYSCALL
+	bool "Enable bpf() system call"
+	select ANON_INODES
+	select BPF
+	default n
+	help
+	  Enable the bpf() system call that allows to manipulate eBPF
+	  programs and maps via file descriptors.
+
+config SHMEM
+	bool "Use full shmem filesystem" if EXPERT
+	default y
+	depends on MMU
+	help
+	  The shmem is an internal filesystem used to manage shared memory.
+	  It is backed by swap and manages resource limits. It is also exported
+	  to userspace as tmpfs if TMPFS is enabled. Disabling this
+	  option replaces shmem and tmpfs with the much simpler ramfs code,
+	  which may be appropriate on small systems without swap.
+
+config AIO
+	bool "Enable AIO support" if EXPERT
+	default y
+	help
+	  This option enables POSIX asynchronous I/O which may by used
+	  by some high performance threaded applications. Disabling
+	  this option saves about 7k.
+
+config ADVISE_SYSCALLS
+	bool "Enable madvise/fadvise syscalls" if EXPERT
+	default y
+	help
+	  This option enables the madvise and fadvise syscalls, used by
+	  applications to advise the kernel about their future memory or file
+	  usage, improving performance. If building an embedded system where no
+	  applications use these syscalls, you can disable this option to save
+	  space.
+
+config PCI_QUIRKS
+	default y
+	bool "Enable PCI quirk workarounds" if EXPERT
+	depends on PCI
+	help
+	  This enables workarounds for various PCI chipset
+	  bugs/quirks. Disable this only if your target machine is
+	  unaffected by PCI quirks.
+
+config EMBEDDED
+	bool "Embedded system"
+	option allnoconfig_y
+	select EXPERT
+	help
+	  This option should be enabled if compiling the kernel for
+	  an embedded system so certain expert options are available
+	  for configuration.
+
+config HAVE_PERF_EVENTS
+	bool
+	help
+	  See tools/perf/design.txt for details.
+
+config PERF_USE_VMALLOC
+	bool
+	help
+	  See tools/perf/design.txt for details
+
+menu "Kernel Performance Events And Counters"
+
+config PERF_EVENTS
+	bool "Kernel performance events and counters"
+	default y if PROFILING
+	depends on HAVE_PERF_EVENTS
+	select ANON_INODES
+	select IRQ_WORK
+	select SRCU
+	help
+	  Enable kernel support for various performance events provided
+	  by software and hardware.
+
+	  Software events are supported either built-in or via the
+	  use of generic tracepoints.
+
+	  Most modern CPUs support performance events via performance
+	  counter registers. These registers count the number of certain
+	  types of hw events: such as instructions executed, cachemisses
+	  suffered, or branches mis-predicted - without slowing down the
+	  kernel or applications. These registers can also trigger interrupts
+	  when a threshold number of events have passed - and can thus be
+	  used to profile the code that runs on that CPU.
+
+	  The Linux Performance Event subsystem provides an abstraction of
+	  these software and hardware event capabilities, available via a
+	  system call and used by the "perf" utility in tools/perf/. It
+	  provides per task and per CPU counters, and it provides event
+	  capabilities on top of those.
+
+	  Say Y if unsure.
+
+config DEBUG_PERF_USE_VMALLOC
+	default n
+	bool "Debug: use vmalloc to back perf mmap() buffers"
+	depends on PERF_EVENTS && DEBUG_KERNEL
+	select PERF_USE_VMALLOC
+	help
+	 Use vmalloc memory to back perf mmap() buffers.
+
+	 Mostly useful for debugging the vmalloc code on platforms
+	 that don't require it.
+
+	 Say N if unsure.
+
+endmenu
+
+config VM_EVENT_COUNTERS
+	default y
+	bool "Enable VM event counters for /proc/vmstat" if EXPERT
+	help
+	  VM event counters are needed for event counts to be shown.
+	  This option allows the disabling of the VM event counters
+	  on EXPERT systems.  /proc/vmstat will only show page counts
+	  if VM event counters are disabled.
+
+config SLUB_DEBUG
+	default y
+	bool "Enable SLUB debugging support" if EXPERT
+	depends on SLUB && SYSFS
+	help
+	  SLUB has extensive debug support features. Disabling these can
+	  result in significant savings in code size. This also disables
+	  SLUB sysfs support. /sys/slab will not exist and there will be
+	  no support for cache validation etc.
+
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overridden at runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
+choice
+	prompt "Choose SLAB allocator"
+	default SLUB
+	help
+	   This option allows to select a slab allocator.
+
+config SLAB
+	depends on !SCHED_BFS
+	bool "SLAB"
+	help
+	  The regular slab allocator that is established and known to work
+	  well in all environments. It organizes cache hot objects in
+	  per cpu and per node queues.
+
+config SLUB
+	bool "SLUB (Unqueued Allocator)"
+	help
+	   SLUB is a slab allocator that minimizes cache line usage
+	   instead of managing queues of cached objects (SLAB approach).
+	   Per cpu caching is realized using slabs of objects instead
+	   of queues of objects. SLUB can use memory efficiently
+	   and has enhanced diagnostics. SLUB is the default choice for
+	   a slab allocator.
+
+config SLOB
+	depends on EXPERT && !SCHED_BFS
+	bool "SLOB (Simple Allocator)"
+	help
+	   SLOB replaces the stock allocator with a drastically simpler
+	   allocator. SLOB is generally more space efficient but
+	   does not perform as well on large systems.
+
+endchoice
+
+config SLUB_CPU_PARTIAL
+	default y
+	depends on SLUB && SMP
+	bool "SLUB per cpu partial cache"
+	help
+	  Per cpu partial caches accellerate objects allocation and freeing
+	  that is local to a processor at the price of more indeterminism
+	  in the latency of the free. On overflow these caches will be cleared
+	  which requires the taking of locks that may cause latency spikes.
+	  Typically one would choose no for a realtime system.
+
+config MMAP_ALLOW_UNINITIALIZED
+	bool "Allow mmapped anonymous memory to be uninitialized"
+	depends on EXPERT && !MMU
+	default n
+	help
+	  Normally, and according to the Linux spec, anonymous memory obtained
+	  from mmap() has it's contents cleared before it is passed to
+	  userspace.  Enabling this config option allows you to request that
+	  mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
+	  providing a huge performance boost.  If this option is not enabled,
+	  then the flag will be ignored.
+
+	  This is taken advantage of by uClibc's malloc(), and also by
+	  ELF-FDPIC binfmt's brk and stack allocator.
+
+	  Because of the obvious security issues, this option should only be
+	  enabled on embedded devices where you control what is run in
+	  userspace.  Since that isn't generally a problem on no-MMU systems,
+	  it is normally safe to say Y here.
+
+	  See Documentation/nommu-mmap.txt for more information.
+
+config SYSTEM_TRUSTED_KEYRING
+	bool "Provide system-wide ring of trusted keys"
+	depends on KEYS
+	help
+	  Provide a system keyring to which trusted keys can be added.  Keys in
+	  the keyring are considered to be trusted.  Keys may be added at will
+	  by the kernel from compiled-in data and from hardware key stores, but
+	  userspace may only add extra keys if those keys can be verified by
+	  keys already in the keyring.
+
+	  Keys in this keyring are used by module signature checking.
+
+config PROFILING
+	bool "Profiling support"
+	help
+	  Say Y here to enable the extended profiling support mechanisms used
+	  by profilers such as OProfile.
+
+#
+# Place an empty function call at each tracepoint site. Can be
+# dynamically changed for a probe function.
+#
+config TRACEPOINTS
+	bool
+
+source "arch/Kconfig"
+
+endmenu		# General setup
+
+config HAVE_GENERIC_DMA_COHERENT
+	bool
+	default n
+
+config SLABINFO
+	bool
+	depends on PROC_FS
+	depends on SLAB || SLUB_DEBUG
+	default y
+
+config RT_MUTEXES
+	bool
+
+config BASE_SMALL
+	int
+	default 0 if BASE_FULL
+	default 1 if !BASE_FULL
+
+menuconfig MODULES
+	bool "Enable loadable module support"
+	option modules
+	help
+	  Kernel modules are small pieces of compiled code which can
+	  be inserted in the running kernel, rather than being
+	  permanently built into the kernel.  You use the "modprobe"
+	  tool to add (and sometimes remove) them.  If you say Y here,
+	  many parts of the kernel can be built as modules (by
+	  answering M instead of Y where indicated): this is most
+	  useful for infrequently used options which are not required
+	  for booting.  For more information, see the man pages for
+	  modprobe, lsmod, modinfo, insmod and rmmod.
+
+	  If you say Y here, you will need to run "make
+	  modules_install" to put the modules under /lib/modules/
+	  where modprobe can find them (you may need to be root to do
+	  this).
+
+	  If unsure, say Y.
+
+if MODULES
+
+config MODULE_FORCE_LOAD
+	bool "Forced module loading"
+	default n
+	help
+	  Allow loading of modules without version information (ie. modprobe
+	  --force).  Forced module loading sets the 'F' (forced) taint flag and
+	  is usually a really bad idea.
+
+config MODULE_UNLOAD
+	bool "Module unloading"
+	help
+	  Without this option you will not be able to unload any
+	  modules (note that some modules may not be unloadable
+	  anyway), which makes your kernel smaller, faster
+	  and simpler.  If unsure, say Y.
+
+config MODULE_FORCE_UNLOAD
+	bool "Forced module unloading"
+	depends on MODULE_UNLOAD
+	help
+	  This option allows you to force a module to unload, even if the
+	  kernel believes it is unsafe: the kernel will remove the module
+	  without waiting for anyone to stop using it (using the -f option to
+	  rmmod).  This is mainly for kernel developers and desperate users.
+	  If unsure, say N.
+
+config MODVERSIONS
+	bool "Module versioning support"
+	help
+	  Usually, you have to use modules compiled with your kernel.
+	  Saying Y here makes it sometimes possible to use modules
+	  compiled for different kernels, by adding enough information
+	  to the modules to (hopefully) spot any changes which would
+	  make them incompatible with the kernel you are running.  If
+	  unsure, say N.
+
+config MODULE_SRCVERSION_ALL
+	bool "Source checksum for all modules"
+	help
+	  Modules which contain a MODULE_VERSION get an extra "srcversion"
+	  field inserted into their modinfo section, which contains a
+    	  sum of the source files which made it.  This helps maintainers
+	  see exactly which source was used to build a module (since
+	  others sometimes change the module source without updating
+	  the version).  With this option, such a "srcversion" field
+	  will be created for all modules.  If unsure, say N.
+
+config MODULE_SIG
+	bool "Module signature verification"
+	depends on MODULES
+	select SYSTEM_TRUSTED_KEYRING
+	select KEYS
+	select CRYPTO
+	select ASYMMETRIC_KEY_TYPE
+	select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
+	select PUBLIC_KEY_ALGO_RSA
+	select ASN1
+	select OID_REGISTRY
+	select X509_CERTIFICATE_PARSER
+	help
+	  Check modules for valid signatures upon load: the signature
+	  is simply appended to the module. For more information see
+	  Documentation/module-signing.txt.
+
+	  !!!WARNING!!!  If you enable this option, you MUST make sure that the
+	  module DOES NOT get stripped after being signed.  This includes the
+	  debuginfo strip done by some packagers (such as rpmbuild) and
+	  inclusion into an initramfs that wants the module size reduced.
+
+config MODULE_SIG_FORCE
+	bool "Require modules to be validly signed"
+	depends on MODULE_SIG
+	help
+	  Reject unsigned modules or signed modules for which we don't have a
+	  key.  Without this, such modules will simply taint the kernel.
+
+config MODULE_SIG_ALL
+	bool "Automatically sign all modules"
+	default y
+	depends on MODULE_SIG
+	help
+	  Sign all modules during make modules_install. Without this option,
+	  modules must be signed manually, using the scripts/sign-file tool.
+
+comment "Do not forget to sign required modules with scripts/sign-file"
+	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
+
+choice
+	prompt "Which hash algorithm should modules be signed with?"
+	depends on MODULE_SIG
+	help
+	  This determines which sort of hashing algorithm will be used during
+	  signature generation.  This algorithm _must_ be built into the kernel
+	  directly so that signature verification can take place.  It is not
+	  possible to load a signed module containing the algorithm to check
+	  the signature on that module.
+
+config MODULE_SIG_SHA1
+	bool "Sign modules with SHA-1"
+	select CRYPTO_SHA1
+
+config MODULE_SIG_SHA224
+	bool "Sign modules with SHA-224"
+	select CRYPTO_SHA256
+
+config MODULE_SIG_SHA256
+	bool "Sign modules with SHA-256"
+	select CRYPTO_SHA256
+
+config MODULE_SIG_SHA384
+	bool "Sign modules with SHA-384"
+	select CRYPTO_SHA512
+
+config MODULE_SIG_SHA512
+	bool "Sign modules with SHA-512"
+	select CRYPTO_SHA512
+
+endchoice
+
+config MODULE_SIG_HASH
+	string
+	depends on MODULE_SIG
+	default "sha1" if MODULE_SIG_SHA1
+	default "sha224" if MODULE_SIG_SHA224
+	default "sha256" if MODULE_SIG_SHA256
+	default "sha384" if MODULE_SIG_SHA384
+	default "sha512" if MODULE_SIG_SHA512
+
+config MODULE_COMPRESS
+	bool "Compress modules on installation"
+	depends on MODULES
+	help
+	  This option compresses the kernel modules when 'make
+	  modules_install' is run.
+
+	  The modules will be compressed either using gzip or xz depend on the
+	  choice made in "Compression algorithm".
+
+	  module-init-tools has support for gzip format while kmod handle gzip
+	  and xz compressed modules.
+
+	  When a kernel module is installed from outside of the main kernel
+	  source and uses the Kbuild system for installing modules then that
+	  kernel module will also be compressed when it is installed.
+
+	  This option provides little benefit when the modules are to be used inside
+	  an initrd or initramfs, it generally is more efficient to compress the whole
+	  initrd or initramfs instead.
+
+	  This is fully compatible with signed modules while the signed module is
+	  compressed. module-init-tools or kmod handles decompression and provide to
+	  other layer the uncompressed but signed payload.
+
+choice
+	prompt "Compression algorithm"
+	depends on MODULE_COMPRESS
+	default MODULE_COMPRESS_GZIP
+	help
+	  This determines which sort of compression will be used during
+	  'make modules_install'.
+
+	  GZIP (default) and XZ are supported.
+
+config MODULE_COMPRESS_GZIP
+	bool "GZIP"
+
+config MODULE_COMPRESS_XZ
+	bool "XZ"
+
+endchoice
+
+endif # MODULES
+
+config INIT_ALL_POSSIBLE
+	bool
+	help
+	  Back when each arch used to define their own cpu_online_mask and
+	  cpu_possible_mask, some of them chose to initialize cpu_possible_mask
+	  with all 1s, and others with all 0s.  When they were centralised,
+	  it was better to provide this option than to break all the archs
+	  and have several arch maintainers pursuing me down dark alleys.
+
+config STOP_MACHINE
+	bool
+	default y
+	depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
+	help
+	  Need stop_machine() primitive.
+
+source "block/Kconfig"
+
+config PREEMPT_NOTIFIERS
+	bool
+
+config PADATA
+	depends on SMP
+	bool
+
+# Can be selected by architectures with broken toolchains
+# that get confused by correct const<->read_only section
+# mappings
+config BROKEN_RODATA
+	bool
+
+config ASN1
+	tristate
+	help
+	  Build a simple ASN.1 grammar compiler that produces a bytecode output
+	  that can be interpreted by the ASN.1 stream decoder and used to
+	  inform it as to what tags are to be expected in a stream and what
+	  functions to call on what tags.
+
+source "kernel/Kconfig.locks"