Initial import

1 files changed, 1145 insertions, 0 deletions

diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
new file mode 100644
index 000000000..19d9a578c
--- /dev/null
+++ b/kernel/debug/gdbstub.c
@@ -0,0 +1,1145 @@
+/*
+ * Kernel Debug Core
+ *
+ * Maintainer: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002-2004 Timesys Corporation
+ * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
+ * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2005-2009 Wind River Systems, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * Contributors at various stages not listed above:
+ *  Jason Wessel ( jason.wessel@windriver.com )
+ *  George Anzinger <george@mvista.com>
+ *  Anurekh Saxena (anurekh.saxena@timesys.com)
+ *  Lake Stevens Instrument Division (Glenn Engel)
+ *  Jim Kingdon, Cygnus Support.
+ *
+ * Original KGDB stub: David Grothe <dave@gcom.com>,
+ * Tigran Aivazian <tigran@sco.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/serial_core.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/unaligned.h>
+#include "debug_core.h"
+
+#define KGDB_MAX_THREAD_QUERY 17
+
+/* Our I/O buffers. */
+static char			remcom_in_buffer[BUFMAX];
+static char			remcom_out_buffer[BUFMAX];
+static int			gdbstub_use_prev_in_buf;
+static int			gdbstub_prev_in_buf_pos;
+
+/* Storage for the registers, in GDB format. */
+static unsigned long		gdb_regs[(NUMREGBYTES +
+					sizeof(unsigned long) - 1) /
+					sizeof(unsigned long)];
+
+/*
+ * GDB remote protocol parser:
+ */
+
+#ifdef CONFIG_KGDB_KDB
+static int gdbstub_read_wait(void)
+{
+	int ret = -1;
+	int i;
+
+	if (unlikely(gdbstub_use_prev_in_buf)) {
+		if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
+			return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
+		else
+			gdbstub_use_prev_in_buf = 0;
+	}
+
+	/* poll any additional I/O interfaces that are defined */
+	while (ret < 0)
+		for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
+			ret = kdb_poll_funcs[i]();
+			if (ret > 0)
+				break;
+		}
+	return ret;
+}
+#else
+static int gdbstub_read_wait(void)
+{
+	int ret = dbg_io_ops->read_char();
+	while (ret == NO_POLL_CHAR)
+		ret = dbg_io_ops->read_char();
+	return ret;
+}
+#endif
+/* scan for the sequence $<data>#<checksum> */
+static void get_packet(char *buffer)
+{
+	unsigned char checksum;
+	unsigned char xmitcsum;
+	int count;
+	char ch;
+
+	do {
+		/*
+		 * Spin and wait around for the start character, ignore all
+		 * other characters:
+		 */
+		while ((ch = (gdbstub_read_wait())) != '$')
+			/* nothing */;
+
+		kgdb_connected = 1;
+		checksum = 0;
+		xmitcsum = -1;
+
+		count = 0;
+
+		/*
+		 * now, read until a # or end of buffer is found:
+		 */
+		while (count < (BUFMAX - 1)) {
+			ch = gdbstub_read_wait();
+			if (ch == '#')
+				break;
+			checksum = checksum + ch;
+			buffer[count] = ch;
+			count = count + 1;
+		}
+
+		if (ch == '#') {
+			xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
+			xmitcsum += hex_to_bin(gdbstub_read_wait());
+
+			if (checksum != xmitcsum)
+				/* failed checksum */
+				dbg_io_ops->write_char('-');
+			else
+				/* successful transfer */
+				dbg_io_ops->write_char('+');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+		}
+		buffer[count] = 0;
+	} while (checksum != xmitcsum);
+}
+
+/*
+ * Send the packet in buffer.
+ * Check for gdb connection if asked for.
+ */
+static void put_packet(char *buffer)
+{
+	unsigned char checksum;
+	int count;
+	char ch;
+
+	/*
+	 * $<packet info>#<checksum>.
+	 */
+	while (1) {
+		dbg_io_ops->write_char('$');
+		checksum = 0;
+		count = 0;
+
+		while ((ch = buffer[count])) {
+			dbg_io_ops->write_char(ch);
+			checksum += ch;
+			count++;
+		}
+
+		dbg_io_ops->write_char('#');
+		dbg_io_ops->write_char(hex_asc_hi(checksum));
+		dbg_io_ops->write_char(hex_asc_lo(checksum));
+		if (dbg_io_ops->flush)
+			dbg_io_ops->flush();
+
+		/* Now see what we get in reply. */
+		ch = gdbstub_read_wait();
+
+		if (ch == 3)
+			ch = gdbstub_read_wait();
+
+		/* If we get an ACK, we are done. */
+		if (ch == '+')
+			return;
+
+		/*
+		 * If we get the start of another packet, this means
+		 * that GDB is attempting to reconnect.  We will NAK
+		 * the packet being sent, and stop trying to send this
+		 * packet.
+		 */
+		if (ch == '$') {
+			dbg_io_ops->write_char('-');
+			if (dbg_io_ops->flush)
+				dbg_io_ops->flush();
+			return;
+		}
+	}
+}
+
+static char gdbmsgbuf[BUFMAX + 1];
+
+void gdbstub_msg_write(const char *s, int len)
+{
+	char *bufptr;
+	int wcount;
+	int i;
+
+	if (len == 0)
+		len = strlen(s);
+
+	/* 'O'utput */
+	gdbmsgbuf[0] = 'O';
+
+	/* Fill and send buffers... */
+	while (len > 0) {
+		bufptr = gdbmsgbuf + 1;
+
+		/* Calculate how many this time */
+		if ((len << 1) > (BUFMAX - 2))
+			wcount = (BUFMAX - 2) >> 1;
+		else
+			wcount = len;
+
+		/* Pack in hex chars */
+		for (i = 0; i < wcount; i++)
+			bufptr = hex_byte_pack(bufptr, s[i]);
+		*bufptr = '\0';
+
+		/* Move up */
+		s += wcount;
+		len -= wcount;
+
+		/* Write packet */
+		put_packet(gdbmsgbuf);
+	}
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in
+ * buf.  Return a pointer to the last char put in buf (null). May
+ * return an error.
+ */
+char *kgdb_mem2hex(char *mem, char *buf, int count)
+{
+	char *tmp;
+	int err;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory copy.  Hex conversion will work against this one.
+	 */
+	tmp = buf + count;
+
+	err = probe_kernel_read(tmp, mem, count);
+	if (err)
+		return NULL;
+	while (count > 0) {
+		buf = hex_byte_pack(buf, *tmp);
+		tmp++;
+		count--;
+	}
+	*buf = 0;
+
+	return buf;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in
+ * mem.  Return a pointer to the character AFTER the last byte
+ * written.  May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+	char *tmp_raw;
+	char *tmp_hex;
+
+	/*
+	 * We use the upper half of buf as an intermediate buffer for the
+	 * raw memory that is converted from hex.
+	 */
+	tmp_raw = buf + count * 2;
+
+	tmp_hex = tmp_raw - 1;
+	while (tmp_hex >= buf) {
+		tmp_raw--;
+		*tmp_raw = hex_to_bin(*tmp_hex--);
+		*tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
+	}
+
+	return probe_kernel_write(mem, tmp_raw, count);
+}
+
+/*
+ * While we find nice hex chars, build a long_val.
+ * Return number of chars processed.
+ */
+int kgdb_hex2long(char **ptr, unsigned long *long_val)
+{
+	int hex_val;
+	int num = 0;
+	int negate = 0;
+
+	*long_val = 0;
+
+	if (**ptr == '-') {
+		negate = 1;
+		(*ptr)++;
+	}
+	while (**ptr) {
+		hex_val = hex_to_bin(**ptr);
+		if (hex_val < 0)
+			break;
+
+		*long_val = (*long_val << 4) | hex_val;
+		num++;
+		(*ptr)++;
+	}
+
+	if (negate)
+		*long_val = -*long_val;
+
+	return num;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem.  Fix $, #, and
+ * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
+ * The input buf is overwitten with the result to write to mem.
+ */
+static int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+	int size = 0;
+	char *c = buf;
+
+	while (count-- > 0) {
+		c[size] = *buf++;
+		if (c[size] == 0x7d)
+			c[size] = *buf++ ^ 0x20;
+		size++;
+	}
+
+	return probe_kernel_write(mem, c, size);
+}
+
+#if DBG_MAX_REG_NUM > 0
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	int idx = 0;
+	char *ptr = (char *)gdb_regs;
+
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		dbg_get_reg(i, ptr + idx, regs);
+		idx += dbg_reg_def[i].size;
+	}
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	int idx = 0;
+	char *ptr = (char *)gdb_regs;
+
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		dbg_set_reg(i, ptr + idx, regs);
+		idx += dbg_reg_def[i].size;
+	}
+}
+#endif /* DBG_MAX_REG_NUM > 0 */
+
+/* Write memory due to an 'M' or 'X' packet. */
+static int write_mem_msg(int binary)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+	unsigned long length;
+	int err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
+	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
+		if (binary)
+			err = kgdb_ebin2mem(ptr, (char *)addr, length);
+		else
+			err = kgdb_hex2mem(ptr, (char *)addr, length);
+		if (err)
+			return err;
+		if (CACHE_FLUSH_IS_SAFE)
+			flush_icache_range(addr, addr + length);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void error_packet(char *pkt, int error)
+{
+	error = -error;
+	pkt[0] = 'E';
+	pkt[1] = hex_asc[(error / 10)];
+	pkt[2] = hex_asc[(error % 10)];
+	pkt[3] = '\0';
+}
+
+/*
+ * Thread ID accessors. We represent a flat TID space to GDB, where
+ * the per CPU idle threads (which under Linux all have PID 0) are
+ * remapped to negative TIDs.
+ */
+
+#define BUF_THREAD_ID_SIZE	8
+
+static char *pack_threadid(char *pkt, unsigned char *id)
+{
+	unsigned char *limit;
+	int lzero = 1;
+
+	limit = id + (BUF_THREAD_ID_SIZE / 2);
+	while (id < limit) {
+		if (!lzero || *id != 0) {
+			pkt = hex_byte_pack(pkt, *id);
+			lzero = 0;
+		}
+		id++;
+	}
+
+	if (lzero)
+		pkt = hex_byte_pack(pkt, 0);
+
+	return pkt;
+}
+
+static void int_to_threadref(unsigned char *id, int value)
+{
+	put_unaligned_be32(value, id);
+}
+
+static struct task_struct *getthread(struct pt_regs *regs, int tid)
+{
+	/*
+	 * Non-positive TIDs are remapped to the cpu shadow information
+	 */
+	if (tid == 0 || tid == -1)
+		tid = -atomic_read(&kgdb_active) - 2;
+	if (tid < -1 && tid > -NR_CPUS - 2) {
+		if (kgdb_info[-tid - 2].task)
+			return kgdb_info[-tid - 2].task;
+		else
+			return idle_task(-tid - 2);
+	}
+	if (tid <= 0) {
+		printk(KERN_ERR "KGDB: Internal thread select error\n");
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * find_task_by_pid_ns() does not take the tasklist lock anymore
+	 * but is nicely RCU locked - hence is a pretty resilient
+	 * thing to use:
+	 */
+	return find_task_by_pid_ns(tid, &init_pid_ns);
+}
+
+
+/*
+ * Remap normal tasks to their real PID,
+ * CPU shadow threads are mapped to -CPU - 2
+ */
+static inline int shadow_pid(int realpid)
+{
+	if (realpid)
+		return realpid;
+
+	return -raw_smp_processor_id() - 2;
+}
+
+/*
+ * All the functions that start with gdb_cmd are the various
+ * operations to implement the handlers for the gdbserial protocol
+ * where KGDB is communicating with an external debugger
+ */
+
+/* Handle the '?' status packets */
+static void gdb_cmd_status(struct kgdb_state *ks)
+{
+	/*
+	 * We know that this packet is only sent
+	 * during initial connect.  So to be safe,
+	 * we clear out our breakpoints now in case
+	 * GDB is reconnecting.
+	 */
+	dbg_remove_all_break();
+
+	remcom_out_buffer[0] = 'S';
+	hex_byte_pack(&remcom_out_buffer[1], ks->signo);
+}
+
+static void gdb_get_regs_helper(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	void *local_debuggerinfo;
+	int i;
+
+	thread = kgdb_usethread;
+	if (!thread) {
+		thread = kgdb_info[ks->cpu].task;
+		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
+	} else {
+		local_debuggerinfo = NULL;
+		for_each_online_cpu(i) {
+			/*
+			 * Try to find the task on some other
+			 * or possibly this node if we do not
+			 * find the matching task then we try
+			 * to approximate the results.
+			 */
+			if (thread == kgdb_info[i].task)
+				local_debuggerinfo = kgdb_info[i].debuggerinfo;
+		}
+	}
+
+	/*
+	 * All threads that don't have debuggerinfo should be
+	 * in schedule() sleeping, since all other CPUs
+	 * are in kgdb_wait, and thus have debuggerinfo.
+	 */
+	if (local_debuggerinfo) {
+		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
+	} else {
+		/*
+		 * Pull stuff saved during switch_to; nothing
+		 * else is accessible (or even particularly
+		 * relevant).
+		 *
+		 * This should be enough for a stack trace.
+		 */
+		sleeping_thread_to_gdb_regs(gdb_regs, thread);
+	}
+}
+
+/* Handle the 'g' get registers request */
+static void gdb_cmd_getregs(struct kgdb_state *ks)
+{
+	gdb_get_regs_helper(ks);
+	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
+}
+
+/* Handle the 'G' set registers request */
+static void gdb_cmd_setregs(struct kgdb_state *ks)
+{
+	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
+
+	if (kgdb_usethread && kgdb_usethread != current) {
+		error_packet(remcom_out_buffer, -EINVAL);
+	} else {
+		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
+		strcpy(remcom_out_buffer, "OK");
+	}
+}
+
+/* Handle the 'm' memory read bytes */
+static void gdb_cmd_memread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long length;
+	unsigned long addr;
+	char *err;
+
+	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
+					kgdb_hex2long(&ptr, &length) > 0) {
+		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
+		if (!err)
+			error_packet(remcom_out_buffer, -EINVAL);
+	} else {
+		error_packet(remcom_out_buffer, -EINVAL);
+	}
+}
+
+/* Handle the 'M' memory write bytes */
+static void gdb_cmd_memwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(0);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+#if DBG_MAX_REG_NUM > 0
+static char *gdb_hex_reg_helper(int regnum, char *out)
+{
+	int i;
+	int offset = 0;
+
+	for (i = 0; i < regnum; i++)
+		offset += dbg_reg_def[i].size;
+	return kgdb_mem2hex((char *)gdb_regs + offset, out,
+			    dbg_reg_def[i].size);
+}
+
+/* Handle the 'p' individual regster get */
+static void gdb_cmd_reg_get(struct kgdb_state *ks)
+{
+	unsigned long regnum;
+	char *ptr = &remcom_in_buffer[1];
+
+	kgdb_hex2long(&ptr, &regnum);
+	if (regnum >= DBG_MAX_REG_NUM) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	gdb_get_regs_helper(ks);
+	gdb_hex_reg_helper(regnum, remcom_out_buffer);
+}
+
+/* Handle the 'P' individual regster set */
+static void gdb_cmd_reg_set(struct kgdb_state *ks)
+{
+	unsigned long regnum;
+	char *ptr = &remcom_in_buffer[1];
+	int i = 0;
+
+	kgdb_hex2long(&ptr, &regnum);
+	if (*ptr++ != '=' ||
+	    !(!kgdb_usethread || kgdb_usethread == current) ||
+	    !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	memset(gdb_regs, 0, sizeof(gdb_regs));
+	while (i < sizeof(gdb_regs) * 2)
+		if (hex_to_bin(ptr[i]) >= 0)
+			i++;
+		else
+			break;
+	i = i / 2;
+	kgdb_hex2mem(ptr, (char *)gdb_regs, i);
+	dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
+	strcpy(remcom_out_buffer, "OK");
+}
+#endif /* DBG_MAX_REG_NUM > 0 */
+
+/* Handle the 'X' memory binary write bytes */
+static void gdb_cmd_binwrite(struct kgdb_state *ks)
+{
+	int err = write_mem_msg(1);
+
+	if (err)
+		error_packet(remcom_out_buffer, err);
+	else
+		strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'D' or 'k', detach or kill packets */
+static void gdb_cmd_detachkill(struct kgdb_state *ks)
+{
+	int error;
+
+	/* The detach case */
+	if (remcom_in_buffer[0] == 'D') {
+		error = dbg_remove_all_break();
+		if (error < 0) {
+			error_packet(remcom_out_buffer, error);
+		} else {
+			strcpy(remcom_out_buffer, "OK");
+			kgdb_connected = 0;
+		}
+		put_packet(remcom_out_buffer);
+	} else {
+		/*
+		 * Assume the kill case, with no exit code checking,
+		 * trying to force detach the debugger:
+		 */
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+	}
+}
+
+/* Handle the 'R' reboot packets */
+static int gdb_cmd_reboot(struct kgdb_state *ks)
+{
+	/* For now, only honor R0 */
+	if (strcmp(remcom_in_buffer, "R0") == 0) {
+		printk(KERN_CRIT "Executing emergency reboot\n");
+		strcpy(remcom_out_buffer, "OK");
+		put_packet(remcom_out_buffer);
+
+		/*
+		 * Execution should not return from
+		 * machine_emergency_restart()
+		 */
+		machine_emergency_restart();
+		kgdb_connected = 0;
+
+		return 1;
+	}
+	return 0;
+}
+
+/* Handle the 'q' query packets */
+static void gdb_cmd_query(struct kgdb_state *ks)
+{
+	struct task_struct *g;
+	struct task_struct *p;
+	unsigned char thref[BUF_THREAD_ID_SIZE];
+	char *ptr;
+	int i;
+	int cpu;
+	int finished = 0;
+
+	switch (remcom_in_buffer[1]) {
+	case 's':
+	case 'f':
+		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
+			break;
+
+		i = 0;
+		remcom_out_buffer[0] = 'm';
+		ptr = remcom_out_buffer + 1;
+		if (remcom_in_buffer[1] == 'f') {
+			/* Each cpu is a shadow thread */
+			for_each_online_cpu(cpu) {
+				ks->thr_query = 0;
+				int_to_threadref(thref, -cpu - 2);
+				ptr = pack_threadid(ptr, thref);
+				*(ptr++) = ',';
+				i++;
+			}
+		}
+
+		do_each_thread(g, p) {
+			if (i >= ks->thr_query && !finished) {
+				int_to_threadref(thref, p->pid);
+				ptr = pack_threadid(ptr, thref);
+				*(ptr++) = ',';
+				ks->thr_query++;
+				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
+					finished = 1;
+			}
+			i++;
+		} while_each_thread(g, p);
+
+		*(--ptr) = '\0';
+		break;
+
+	case 'C':
+		/* Current thread id */
+		strcpy(remcom_out_buffer, "QC");
+		ks->threadid = shadow_pid(current->pid);
+		int_to_threadref(thref, ks->threadid);
+		pack_threadid(remcom_out_buffer + 2, thref);
+		break;
+	case 'T':
+		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
+			break;
+
+		ks->threadid = 0;
+		ptr = remcom_in_buffer + 17;
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!getthread(ks->linux_regs, ks->threadid)) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		if ((int)ks->threadid > 0) {
+			kgdb_mem2hex(getthread(ks->linux_regs,
+					ks->threadid)->comm,
+					remcom_out_buffer, 16);
+		} else {
+			static char tmpstr[23 + BUF_THREAD_ID_SIZE];
+
+			sprintf(tmpstr, "shadowCPU%d",
+					(int)(-ks->threadid - 2));
+			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
+		}
+		break;
+#ifdef CONFIG_KGDB_KDB
+	case 'R':
+		if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
+			int len = strlen(remcom_in_buffer + 6);
+
+			if ((len % 2) != 0) {
+				strcpy(remcom_out_buffer, "E01");
+				break;
+			}
+			kgdb_hex2mem(remcom_in_buffer + 6,
+				     remcom_out_buffer, len);
+			len = len / 2;
+			remcom_out_buffer[len++] = 0;
+
+			kdb_common_init_state(ks);
+			kdb_parse(remcom_out_buffer);
+			kdb_common_deinit_state();
+
+			strcpy(remcom_out_buffer, "OK");
+		}
+		break;
+#endif
+	}
+}
+
+/* Handle the 'H' task query packets */
+static void gdb_cmd_task(struct kgdb_state *ks)
+{
+	struct task_struct *thread;
+	char *ptr;
+
+	switch (remcom_in_buffer[1]) {
+	case 'g':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		thread = getthread(ks->linux_regs, ks->threadid);
+		if (!thread && ks->threadid > 0) {
+			error_packet(remcom_out_buffer, -EINVAL);
+			break;
+		}
+		kgdb_usethread = thread;
+		ks->kgdb_usethreadid = ks->threadid;
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	case 'c':
+		ptr = &remcom_in_buffer[2];
+		kgdb_hex2long(&ptr, &ks->threadid);
+		if (!ks->threadid) {
+			kgdb_contthread = NULL;
+		} else {
+			thread = getthread(ks->linux_regs, ks->threadid);
+			if (!thread && ks->threadid > 0) {
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			kgdb_contthread = thread;
+		}
+		strcpy(remcom_out_buffer, "OK");
+		break;
+	}
+}
+
+/* Handle the 'T' thread query packets */
+static void gdb_cmd_thread(struct kgdb_state *ks)
+{
+	char *ptr = &remcom_in_buffer[1];
+	struct task_struct *thread;
+
+	kgdb_hex2long(&ptr, &ks->threadid);
+	thread = getthread(ks->linux_regs, ks->threadid);
+	if (thread)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, -EINVAL);
+}
+
+/* Handle the 'z' or 'Z' breakpoint remove or set packets */
+static void gdb_cmd_break(struct kgdb_state *ks)
+{
+	/*
+	 * Since GDB-5.3, it's been drafted that '0' is a software
+	 * breakpoint, '1' is a hardware breakpoint, so let's do that.
+	 */
+	char *bpt_type = &remcom_in_buffer[1];
+	char *ptr = &remcom_in_buffer[2];
+	unsigned long addr;
+	unsigned long length;
+	int error = 0;
+
+	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
+		/* Unsupported */
+		if (*bpt_type > '4')
+			return;
+	} else {
+		if (*bpt_type != '0' && *bpt_type != '1')
+			/* Unsupported. */
+			return;
+	}
+
+	/*
+	 * Test if this is a hardware breakpoint, and
+	 * if we support it:
+	 */
+	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
+		/* Unsupported. */
+		return;
+
+	if (*(ptr++) != ',') {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (!kgdb_hex2long(&ptr, &addr)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	if (*(ptr++) != ',' ||
+		!kgdb_hex2long(&ptr, &length)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+
+	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
+		error = dbg_set_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
+		error = dbg_remove_sw_break(addr);
+	else if (remcom_in_buffer[0] == 'Z')
+		error = arch_kgdb_ops.set_hw_breakpoint(addr,
+			(int)length, *bpt_type - '0');
+	else if (remcom_in_buffer[0] == 'z')
+		error = arch_kgdb_ops.remove_hw_breakpoint(addr,
+			(int) length, *bpt_type - '0');
+
+	if (error == 0)
+		strcpy(remcom_out_buffer, "OK");
+	else
+		error_packet(remcom_out_buffer, error);
+}
+
+/* Handle the 'C' signal / exception passing packets */
+static int gdb_cmd_exception_pass(struct kgdb_state *ks)
+{
+	/* C09 == pass exception
+	 * C15 == detach kgdb, pass exception
+	 */
+	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'c';
+
+	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
+
+		ks->pass_exception = 1;
+		remcom_in_buffer[0] = 'D';
+		dbg_remove_all_break();
+		kgdb_connected = 0;
+		return 1;
+
+	} else {
+		gdbstub_msg_write("KGDB only knows signal 9 (pass)"
+			" and 15 (pass and disconnect)\n"
+			"Executing a continue without signal passing\n", 0);
+		remcom_in_buffer[0] = 'c';
+	}
+
+	/* Indicate fall through */
+	return -1;
+}
+
+/*
+ * This function performs all gdbserial command procesing
+ */
+int gdb_serial_stub(struct kgdb_state *ks)
+{
+	int error = 0;
+	int tmp;
+
+	/* Initialize comm buffer and globals. */
+	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+	kgdb_usethread = kgdb_info[ks->cpu].task;
+	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
+	ks->pass_exception = 0;
+
+	if (kgdb_connected) {
+		unsigned char thref[BUF_THREAD_ID_SIZE];
+		char *ptr;
+
+		/* Reply to host that an exception has occurred */
+		ptr = remcom_out_buffer;
+		*ptr++ = 'T';
+		ptr = hex_byte_pack(ptr, ks->signo);
+		ptr += strlen(strcpy(ptr, "thread:"));
+		int_to_threadref(thref, shadow_pid(current->pid));
+		ptr = pack_threadid(ptr, thref);
+		*ptr++ = ';';
+		put_packet(remcom_out_buffer);
+	}
+
+	while (1) {
+		error = 0;
+
+		/* Clear the out buffer. */
+		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+		get_packet(remcom_in_buffer);
+
+		switch (remcom_in_buffer[0]) {
+		case '?': /* gdbserial status */
+			gdb_cmd_status(ks);
+			break;
+		case 'g': /* return the value of the CPU registers */
+			gdb_cmd_getregs(ks);
+			break;
+		case 'G': /* set the value of the CPU registers - return OK */
+			gdb_cmd_setregs(ks);
+			break;
+		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+			gdb_cmd_memread(ks);
+			break;
+		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_memwrite(ks);
+			break;
+#if DBG_MAX_REG_NUM > 0
+		case 'p': /* pXX Return gdb register XX (in hex) */
+			gdb_cmd_reg_get(ks);
+			break;
+		case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
+			gdb_cmd_reg_set(ks);
+			break;
+#endif /* DBG_MAX_REG_NUM > 0 */
+		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+			gdb_cmd_binwrite(ks);
+			break;
+			/* kill or detach. KGDB should treat this like a
+			 * continue.
+			 */
+		case 'D': /* Debugger detach */
+		case 'k': /* Debugger detach via kill */
+			gdb_cmd_detachkill(ks);
+			goto default_handle;
+		case 'R': /* Reboot */
+			if (gdb_cmd_reboot(ks))
+				goto default_handle;
+			break;
+		case 'q': /* query command */
+			gdb_cmd_query(ks);
+			break;
+		case 'H': /* task related */
+			gdb_cmd_task(ks);
+			break;
+		case 'T': /* Query thread status */
+			gdb_cmd_thread(ks);
+			break;
+		case 'z': /* Break point remove */
+		case 'Z': /* Break point set */
+			gdb_cmd_break(ks);
+			break;
+#ifdef CONFIG_KGDB_KDB
+		case '3': /* Escape into back into kdb */
+			if (remcom_in_buffer[1] == '\0') {
+				gdb_cmd_detachkill(ks);
+				return DBG_PASS_EVENT;
+			}
+#endif
+		case 'C': /* Exception passing */
+			tmp = gdb_cmd_exception_pass(ks);
+			if (tmp > 0)
+				goto default_handle;
+			if (tmp == 0)
+				break;
+			/* Fall through on tmp < 0 */
+		case 'c': /* Continue packet */
+		case 's': /* Single step packet */
+			if (kgdb_contthread && kgdb_contthread != current) {
+				/* Can't switch threads in kgdb */
+				error_packet(remcom_out_buffer, -EINVAL);
+				break;
+			}
+			dbg_activate_sw_breakpoints();
+			/* Fall through to default processing */
+		default:
+default_handle:
+			error = kgdb_arch_handle_exception(ks->ex_vector,
+						ks->signo,
+						ks->err_code,
+						remcom_in_buffer,
+						remcom_out_buffer,
+						ks->linux_regs);
+			/*
+			 * Leave cmd processing on error, detach,
+			 * kill, continue, or single step.
+			 */
+			if (error >= 0 || remcom_in_buffer[0] == 'D' ||
+			    remcom_in_buffer[0] == 'k') {
+				error = 0;
+				goto kgdb_exit;
+			}
+
+		}
+
+		/* reply to the request */
+		put_packet(remcom_out_buffer);
+	}
+
+kgdb_exit:
+	if (ks->pass_exception)
+		error = 1;
+	return error;
+}
+
+int gdbstub_state(struct kgdb_state *ks, char *cmd)
+{
+	int error;
+
+	switch (cmd[0]) {
+	case 'e':
+		error = kgdb_arch_handle_exception(ks->ex_vector,
+						   ks->signo,
+						   ks->err_code,
+						   remcom_in_buffer,
+						   remcom_out_buffer,
+						   ks->linux_regs);
+		return error;
+	case 's':
+	case 'c':
+		strcpy(remcom_in_buffer, cmd);
+		return 0;
+	case '$':
+		strcpy(remcom_in_buffer, cmd);
+		gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
+		gdbstub_prev_in_buf_pos = 0;
+		return 0;
+	}
+	dbg_io_ops->write_char('+');
+	put_packet(remcom_out_buffer);
+	return 0;
+}
+
+/**
+ * gdbstub_exit - Send an exit message to GDB
+ * @status: The exit code to report.
+ */
+void gdbstub_exit(int status)
+{
+	unsigned char checksum, ch, buffer[3];
+	int loop;
+
+	if (!kgdb_connected)
+		return;
+	kgdb_connected = 0;
+
+	if (!dbg_io_ops || dbg_kdb_mode)
+		return;
+
+	buffer[0] = 'W';
+	buffer[1] = hex_asc_hi(status);
+	buffer[2] = hex_asc_lo(status);
+
+	dbg_io_ops->write_char('$');
+	checksum = 0;
+
+	for (loop = 0; loop < 3; loop++) {
+		ch = buffer[loop];
+		checksum += ch;
+		dbg_io_ops->write_char(ch);
+	}
+
+	dbg_io_ops->write_char('#');
+	dbg_io_ops->write_char(hex_asc_hi(checksum));
+	dbg_io_ops->write_char(hex_asc_lo(checksum));
+
+	/* make sure the output is flushed, lest the bootloader clobber it */
+	if (dbg_io_ops->flush)
+		dbg_io_ops->flush();
+}