Linux-libre 4.2-gnu

1 files changed, 0 insertions, 278 deletions

diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 89a46f3ff..9e302315e 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -91,284 +91,6 @@ config PM_STD_PARTITION
 	  suspended image to. It will simply pick the first available swap 
 	  device.
 
-menuconfig TOI_CORE
-	bool "Enhanced Hibernation (TuxOnIce)"
-	depends on HIBERNATION
-	default y
-	---help---
-	  TuxOnIce is the 'new and improved' suspend support.
-
-	  See the TuxOnIce home page (tuxonice.net)
-	  for FAQs, HOWTOs and other documentation.
-
-	comment "Image Storage (you need at least one allocator)"
-		depends on TOI_CORE
-
-	config TOI_FILE
-		bool "File Allocator"
-		depends on TOI_CORE
-		default y
-		---help---
-		  This option enables support for storing an image in a
-		  simple file. You might want this if your swap is
-		  sometimes full enough that you don't have enough spare
-		  space to store an image.
-
-	config TOI_SWAP
-		bool "Swap Allocator"
-		depends on TOI_CORE && SWAP
-		default y
-		---help---
-		  This option enables support for storing an image in your
-		  swap space.
-
-	comment "General Options"
-		depends on TOI_CORE
-
-	config TOI_PRUNE
-		bool "Image pruning support"
-		depends on TOI_CORE && CRYPTO && BROKEN
-		default y
-		---help---
-		  This option adds support for using cryptoapi hashing
-		  algorithms to identify pages with the same content. We
-		  then write a much smaller pointer to the first copy of
-		  the data instead of a complete (perhaps compressed)
-                  additional copy.
-
-		  You probably want this, so say Y here.
-
-	comment "No image pruning support available without Cryptoapi support."
-		depends on TOI_CORE && !CRYPTO
-
-	config TOI_CRYPTO
-		bool "Compression support"
-		depends on TOI_CORE && CRYPTO
-		default y
-		---help---
-		  This option adds support for using cryptoapi compression
-		  algorithms. Compression is particularly useful as it can
-		  more than double your suspend and resume speed (depending
-		  upon how well your image compresses).
-
-		  You probably want this, so say Y here.
-
-	comment "No compression support available without Cryptoapi support."
-		depends on TOI_CORE && !CRYPTO
-
-	config TOI_USERUI
-		bool "Userspace User Interface support"
-		depends on TOI_CORE && NET && (VT || SERIAL_CONSOLE)
-		default y
-		---help---
-		  This option enabled support for a userspace based user interface
-		  to TuxOnIce, which allows you to have a nice display while suspending
-		  and resuming, and also enables features such as pressing escape to
-		  cancel a cycle or interactive debugging.
-
-	config TOI_USERUI_DEFAULT_PATH
-		string "Default userui program location"
-		default "/usr/local/sbin/tuxoniceui_text"
-		depends on TOI_USERUI
-		---help---
-		  This entry allows you to specify a default path to the userui binary.
-
-	config TOI_DEFAULT_IMAGE_SIZE_LIMIT
-		int "Default image size limit"
-		range -2 65536 
-		default "-2"
-		depends on TOI_CORE
-		---help---
-		  This entry allows you to specify a default image size limit. It can
-		  be overridden at run-time using /sys/power/tuxonice/image_size_limit.
-
-	config TOI_KEEP_IMAGE
-		bool "Allow Keep Image Mode"
-		depends on TOI_CORE
-		---help---
-		  This option allows you to keep and image and reuse it. It is intended
-		  __ONLY__ for use with systems where all filesystems are mounted read-
-		  only (kiosks, for example). To use it, compile this option in and boot
-		  normally. Set the KEEP_IMAGE flag in /sys/power/tuxonice and suspend.
-		  When you resume, the image will not be removed. You will be unable to turn
-		  off swap partitions (assuming you are using the swap allocator), but future
-		  suspends simply do a power-down. The image can be updated using the
-		  kernel command line parameter suspend_act= to turn off the keep image
-		  bit. Keep image mode is a little less user friendly on purpose - it
-		  should not be used without thought!
-
-	config TOI_INCREMENTAL
-		bool "Incremental Image Support"
-		depends on TOI_CORE && 64BIT && TOI_KEEP_IMAGE
-		default n
-		---help---
-		  This option enables the work in progress toward using the dirty page
-		  tracking to record changes to pages. It is hoped that
-		  this will be an initial step toward implementing storing just
-		  the differences between consecutive images, which will
-		  increase the amount of storage needed for the image, but also
-		  increase the speed at which writing an image occurs and
-		  reduce the wear and tear on drives.
-
-		  At the moment, all that is implemented is the first step of keeping
-		  an existing image and then comparing it to the contents in memory
-		  (by setting /sys/power/tuxonice/verify_image to 1 and triggering a
-		  (fake) resume) to see what the page change tracking should find to be
-		  different. If you have verify_image set to 1, TuxOnIce will automatically
-		  invalidate the old image when you next try to hibernate, so there's no
-		  greater chance of disk corruption than normal.
-
-	comment "No incremental image support available without Keep Image support."
-		depends on TOI_CORE && !TOI_KEEP_IMAGE && 64BIT
-
-	config TOI_REPLACE_SWSUSP
-		bool "Replace swsusp by default"
-		default y
-		depends on TOI_CORE
-		---help---
-		  TuxOnIce can replace swsusp. This option makes that the default state,
-		  requiring you to echo 0 > /sys/power/tuxonice/replace_swsusp if you want
-		  to use the vanilla kernel functionality. Note that your initrd/ramfs will
-		  need to do this before trying to resume, too.
-		  With overriding swsusp enabled, echoing disk  to /sys/power/state will
-		  start a TuxOnIce cycle. If resume= doesn't specify an allocator and both
-		  the swap and file allocators are compiled in, the swap allocator will be
-		  used by default.
-
-	config TOI_IGNORE_LATE_INITCALL
-		bool "Wait for initrd/ramfs to run, by default"
-		default n
-		depends on TOI_CORE
-		---help---
-		  When booting, TuxOnIce can check for an image and start to resume prior
-		  to any initrd/ramfs running (via a late initcall).
-
-		  If you don't have an initrd/ramfs, this is what you want to happen -
-		  otherwise you won't be able to safely resume. You should set this option
-		  to 'No'.
-
-		  If, however, you want your initrd/ramfs to run anyway before resuming,
-		  you need to tell TuxOnIce to ignore that earlier opportunity to resume.
-		  This can be done either by using this compile time option, or by
-		  overriding this option with the boot-time parameter toi_initramfs_resume_only=1.
-
-		  Note that if TuxOnIce can't resume at the earlier opportunity, the
-		  value of this option won't matter - the initramfs/initrd (if any) will
-		  run anyway.
-
-	menuconfig TOI_CLUSTER
-		bool "Cluster support"
-		default n
-		depends on TOI_CORE && NET && BROKEN
-		---help---
-		  Support for linking multiple machines in a cluster so that they suspend
-		  and resume together.
-
-	config TOI_DEFAULT_CLUSTER_INTERFACE
-		string "Default cluster interface"
-		depends on TOI_CLUSTER
-		---help---
-		  The default interface on which to communicate with other nodes in
-		  the cluster.
-
-		  If no value is set here, cluster support will be disabled by default.
-
-	config TOI_DEFAULT_CLUSTER_KEY
-		string "Default cluster key"
-		default "Default"
-		depends on TOI_CLUSTER
-		---help---
-		  The default key used by this node. All nodes in the same cluster
-		  have the same key. Multiple clusters may coexist on the same lan
-		  by using different values for this key.
-
-	config TOI_CLUSTER_IMAGE_TIMEOUT
-		int "Timeout when checking for image"
-		default 15
-		depends on TOI_CLUSTER
-		---help---
-		  Timeout (seconds) before continuing to boot when waiting to see
-		  whether other nodes might have an image. Set to -1 to wait
-		  indefinitely. In WAIT_UNTIL_NODES is non zero, we might continue
-		  booting sooner than this timeout.
-
-	config TOI_CLUSTER_WAIT_UNTIL_NODES
-		int "Nodes without image before continuing"
-		default 0
-		depends on TOI_CLUSTER
-		---help---
-		  When booting and no image is found, we wait to see if other nodes
-		  have an image before continuing to boot. This value lets us
-		  continue after seeing a certain number of nodes without an image,
-		  instead of continuing to wait for the timeout. Set to 0 to only
-		  use the timeout.
-
-	config TOI_DEFAULT_CLUSTER_PRE_HIBERNATE
-		string "Default pre-hibernate script"
-		depends on TOI_CLUSTER
-		---help---
-		  The default script to be called when starting to hibernate.
-
-	config TOI_DEFAULT_CLUSTER_POST_HIBERNATE
-		string "Default post-hibernate script"
-		depends on TOI_CLUSTER
-		---help---
-		  The default script to be called after resuming from hibernation.
-
-	config TOI_DEFAULT_WAIT
-		int "Default waiting time for emergency boot messages"
-		default "25"
-		range -1 32768
-		depends on TOI_CORE
-		help
-		  TuxOnIce can display warnings very early in the process of resuming,
-		  if (for example) it appears that you have booted a kernel that doesn't
-		  match an image on disk. It can then give you the opportunity to either
-		  continue booting that kernel, or reboot the machine. This option can be
-		  used to control how long to wait in such circumstances. -1 means wait
-		  forever. 0 means don't wait at all (do the default action, which will
-		  generally be to continue booting and remove the image). Values of 1 or
-		  more indicate a number of seconds (up to 255) to wait before doing the
-		  default.
-
-	config  TOI_DEFAULT_EXTRA_PAGES_ALLOWANCE
-		int "Default extra pages allowance"
-		default "2000"
-		range 500 32768
-		depends on TOI_CORE
-		help
-		  This value controls the default for the allowance TuxOnIce makes for
-		  drivers to allocate extra memory during the atomic copy. The default
-		  value of 2000 will be okay in most cases. If you are using
-		  DRI, the easiest way to find what value to use is to try to hibernate
-		  and look at how many pages were actually needed in the sysfs entry
-		  /sys/power/tuxonice/debug_info (first number on the last line), adding
-		  a little extra because the value is not always the same.
-
-	config TOI_CHECKSUM
-		bool "Checksum pageset2"
-		default n
-		depends on TOI_CORE
-		select CRYPTO
-		select CRYPTO_ALGAPI
-		select CRYPTO_MD4
-		---help---
-		  Adds support for checksumming pageset2 pages, to ensure you really get an
-		  atomic copy. Since some filesystems (XFS especially) change metadata even
-		  when there's no other activity, we need this to check for pages that have
-		  been changed while we were saving the page cache. If your debugging output
-		  always says no pages were resaved, you may be able to safely disable this
-		  option.
-
-config TOI
-	bool
-	depends on TOI_CORE!=n
-	default y
-
-config TOI_ZRAM_SUPPORT
-	def_bool y
-	depends on TOI && ZRAM!=n
-
 config PM_SLEEP
 	def_bool y
 	depends on SUSPEND || HIBERNATE_CALLBACKS