summaryrefslogtreecommitdiff
path: root/kernel/power/Kconfig
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-26 05:33:09 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-26 05:33:09 -0300
commit4a327fcef90ba27150a3e8741441b68c605ae248 (patch)
treededef84cccbd02054df4cfb844dd3c9d588edf83 /kernel/power/Kconfig
parenta156245300d5362a3b4c4afdace9e2b90169fe43 (diff)
Add TuxOnIce support adapted for the 4.5-gnu kernel versionpck-4.5-gnu
Diffstat (limited to 'kernel/power/Kconfig')
-rw-r--r--kernel/power/Kconfig278
1 files changed, 278 insertions, 0 deletions
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 68d3ebc12..5f93a3ccd 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -101,6 +101,284 @@ config PM_STD_PARTITION
suspended image to. It will simply pick the first available swap
device.
+menuconfig TOI_CORE
+ bool "Enhanced Hibernation (TuxOnIce)"
+ depends on HIBERNATION
+ default y
+ ---help---
+ TuxOnIce is the 'new and improved' suspend support.
+
+ See the TuxOnIce home page (tuxonice.net)
+ for FAQs, HOWTOs and other documentation.
+
+ comment "Image Storage (you need at least one allocator)"
+ depends on TOI_CORE
+
+ config TOI_FILE
+ bool "File Allocator"
+ depends on TOI_CORE
+ default y
+ ---help---
+ This option enables support for storing an image in a
+ simple file. You might want this if your swap is
+ sometimes full enough that you don't have enough spare
+ space to store an image.
+
+ config TOI_SWAP
+ bool "Swap Allocator"
+ depends on TOI_CORE && SWAP
+ default y
+ ---help---
+ This option enables support for storing an image in your
+ swap space.
+
+ comment "General Options"
+ depends on TOI_CORE
+
+ config TOI_PRUNE
+ bool "Image pruning support"
+ depends on TOI_CORE && CRYPTO && BROKEN
+ default y
+ ---help---
+ This option adds support for using cryptoapi hashing
+ algorithms to identify pages with the same content. We
+ then write a much smaller pointer to the first copy of
+ the data instead of a complete (perhaps compressed)
+ additional copy.
+
+ You probably want this, so say Y here.
+
+ comment "No image pruning support available without Cryptoapi support."
+ depends on TOI_CORE && !CRYPTO
+
+ config TOI_CRYPTO
+ bool "Compression support"
+ depends on TOI_CORE && CRYPTO
+ default y
+ ---help---
+ This option adds support for using cryptoapi compression
+ algorithms. Compression is particularly useful as it can
+ more than double your suspend and resume speed (depending
+ upon how well your image compresses).
+
+ You probably want this, so say Y here.
+
+ comment "No compression support available without Cryptoapi support."
+ depends on TOI_CORE && !CRYPTO
+
+ config TOI_USERUI
+ bool "Userspace User Interface support"
+ depends on TOI_CORE && NET && (VT || SERIAL_CONSOLE)
+ default y
+ ---help---
+ This option enabled support for a userspace based user interface
+ to TuxOnIce, which allows you to have a nice display while suspending
+ and resuming, and also enables features such as pressing escape to
+ cancel a cycle or interactive debugging.
+
+ config TOI_USERUI_DEFAULT_PATH
+ string "Default userui program location"
+ default "/usr/local/sbin/tuxoniceui_text"
+ depends on TOI_USERUI
+ ---help---
+ This entry allows you to specify a default path to the userui binary.
+
+ config TOI_DEFAULT_IMAGE_SIZE_LIMIT
+ int "Default image size limit"
+ range -2 65536
+ default "-2"
+ depends on TOI_CORE
+ ---help---
+ This entry allows you to specify a default image size limit. It can
+ be overridden at run-time using /sys/power/tuxonice/image_size_limit.
+
+ config TOI_KEEP_IMAGE
+ bool "Allow Keep Image Mode"
+ depends on TOI_CORE
+ ---help---
+ This option allows you to keep and image and reuse it. It is intended
+ __ONLY__ for use with systems where all filesystems are mounted read-
+ only (kiosks, for example). To use it, compile this option in and boot
+ normally. Set the KEEP_IMAGE flag in /sys/power/tuxonice and suspend.
+ When you resume, the image will not be removed. You will be unable to turn
+ off swap partitions (assuming you are using the swap allocator), but future
+ suspends simply do a power-down. The image can be updated using the
+ kernel command line parameter suspend_act= to turn off the keep image
+ bit. Keep image mode is a little less user friendly on purpose - it
+ should not be used without thought!
+
+ config TOI_INCREMENTAL
+ bool "Incremental Image Support"
+ depends on TOI_CORE && 64BIT && TOI_KEEP_IMAGE
+ default n
+ ---help---
+ This option enables the work in progress toward using the dirty page
+ tracking to record changes to pages. It is hoped that
+ this will be an initial step toward implementing storing just
+ the differences between consecutive images, which will
+ increase the amount of storage needed for the image, but also
+ increase the speed at which writing an image occurs and
+ reduce the wear and tear on drives.
+
+ At the moment, all that is implemented is the first step of keeping
+ an existing image and then comparing it to the contents in memory
+ (by setting /sys/power/tuxonice/verify_image to 1 and triggering a
+ (fake) resume) to see what the page change tracking should find to be
+ different. If you have verify_image set to 1, TuxOnIce will automatically
+ invalidate the old image when you next try to hibernate, so there's no
+ greater chance of disk corruption than normal.
+
+ comment "No incremental image support available without Keep Image support."
+ depends on TOI_CORE && !TOI_KEEP_IMAGE && 64BIT
+
+ config TOI_REPLACE_SWSUSP
+ bool "Replace swsusp by default"
+ default y
+ depends on TOI_CORE
+ ---help---
+ TuxOnIce can replace swsusp. This option makes that the default state,
+ requiring you to echo 0 > /sys/power/tuxonice/replace_swsusp if you want
+ to use the vanilla kernel functionality. Note that your initrd/ramfs will
+ need to do this before trying to resume, too.
+ With overriding swsusp enabled, echoing disk to /sys/power/state will
+ start a TuxOnIce cycle. If resume= doesn't specify an allocator and both
+ the swap and file allocators are compiled in, the swap allocator will be
+ used by default.
+
+ config TOI_IGNORE_LATE_INITCALL
+ bool "Wait for initrd/ramfs to run, by default"
+ default n
+ depends on TOI_CORE
+ ---help---
+ When booting, TuxOnIce can check for an image and start to resume prior
+ to any initrd/ramfs running (via a late initcall).
+
+ If you don't have an initrd/ramfs, this is what you want to happen -
+ otherwise you won't be able to safely resume. You should set this option
+ to 'No'.
+
+ If, however, you want your initrd/ramfs to run anyway before resuming,
+ you need to tell TuxOnIce to ignore that earlier opportunity to resume.
+ This can be done either by using this compile time option, or by
+ overriding this option with the boot-time parameter toi_initramfs_resume_only=1.
+
+ Note that if TuxOnIce can't resume at the earlier opportunity, the
+ value of this option won't matter - the initramfs/initrd (if any) will
+ run anyway.
+
+ menuconfig TOI_CLUSTER
+ bool "Cluster support"
+ default n
+ depends on TOI_CORE && NET && BROKEN
+ ---help---
+ Support for linking multiple machines in a cluster so that they suspend
+ and resume together.
+
+ config TOI_DEFAULT_CLUSTER_INTERFACE
+ string "Default cluster interface"
+ depends on TOI_CLUSTER
+ ---help---
+ The default interface on which to communicate with other nodes in
+ the cluster.
+
+ If no value is set here, cluster support will be disabled by default.
+
+ config TOI_DEFAULT_CLUSTER_KEY
+ string "Default cluster key"
+ default "Default"
+ depends on TOI_CLUSTER
+ ---help---
+ The default key used by this node. All nodes in the same cluster
+ have the same key. Multiple clusters may coexist on the same lan
+ by using different values for this key.
+
+ config TOI_CLUSTER_IMAGE_TIMEOUT
+ int "Timeout when checking for image"
+ default 15
+ depends on TOI_CLUSTER
+ ---help---
+ Timeout (seconds) before continuing to boot when waiting to see
+ whether other nodes might have an image. Set to -1 to wait
+ indefinitely. In WAIT_UNTIL_NODES is non zero, we might continue
+ booting sooner than this timeout.
+
+ config TOI_CLUSTER_WAIT_UNTIL_NODES
+ int "Nodes without image before continuing"
+ default 0
+ depends on TOI_CLUSTER
+ ---help---
+ When booting and no image is found, we wait to see if other nodes
+ have an image before continuing to boot. This value lets us
+ continue after seeing a certain number of nodes without an image,
+ instead of continuing to wait for the timeout. Set to 0 to only
+ use the timeout.
+
+ config TOI_DEFAULT_CLUSTER_PRE_HIBERNATE
+ string "Default pre-hibernate script"
+ depends on TOI_CLUSTER
+ ---help---
+ The default script to be called when starting to hibernate.
+
+ config TOI_DEFAULT_CLUSTER_POST_HIBERNATE
+ string "Default post-hibernate script"
+ depends on TOI_CLUSTER
+ ---help---
+ The default script to be called after resuming from hibernation.
+
+ config TOI_DEFAULT_WAIT
+ int "Default waiting time for emergency boot messages"
+ default "25"
+ range -1 32768
+ depends on TOI_CORE
+ help
+ TuxOnIce can display warnings very early in the process of resuming,
+ if (for example) it appears that you have booted a kernel that doesn't
+ match an image on disk. It can then give you the opportunity to either
+ continue booting that kernel, or reboot the machine. This option can be
+ used to control how long to wait in such circumstances. -1 means wait
+ forever. 0 means don't wait at all (do the default action, which will
+ generally be to continue booting and remove the image). Values of 1 or
+ more indicate a number of seconds (up to 255) to wait before doing the
+ default.
+
+ config TOI_DEFAULT_EXTRA_PAGES_ALLOWANCE
+ int "Default extra pages allowance"
+ default "2000"
+ range 500 32768
+ depends on TOI_CORE
+ help
+ This value controls the default for the allowance TuxOnIce makes for
+ drivers to allocate extra memory during the atomic copy. The default
+ value of 2000 will be okay in most cases. If you are using
+ DRI, the easiest way to find what value to use is to try to hibernate
+ and look at how many pages were actually needed in the sysfs entry
+ /sys/power/tuxonice/debug_info (first number on the last line), adding
+ a little extra because the value is not always the same.
+
+ config TOI_CHECKSUM
+ bool "Checksum pageset2"
+ default n
+ depends on TOI_CORE
+ select CRYPTO
+ select CRYPTO_ALGAPI
+ select CRYPTO_MD4
+ ---help---
+ Adds support for checksumming pageset2 pages, to ensure you really get an
+ atomic copy. Since some filesystems (XFS especially) change metadata even
+ when there's no other activity, we need this to check for pages that have
+ been changed while we were saving the page cache. If your debugging output
+ always says no pages were resaved, you may be able to safely disable this
+ option.
+
+config TOI
+ bool
+ depends on TOI_CORE!=n
+ default y
+
+config TOI_ZRAM_SUPPORT
+ def_bool y
+ depends on TOI && ZRAM!=n
+
config PM_SLEEP
def_bool y
depends on SUSPEND || HIBERNATE_CALLBACKS