summaryrefslogtreecommitdiff
path: root/net/irda
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /net/irda
Initial import
Diffstat (limited to 'net/irda')
-rw-r--r--net/irda/Kconfig96
-rw-r--r--net/irda/Makefile15
-rw-r--r--net/irda/af_irda.c2716
-rw-r--r--net/irda/discovery.c417
-rw-r--r--net/irda/ircomm/Kconfig12
-rw-r--r--net/irda/ircomm/Makefile8
-rw-r--r--net/irda/ircomm/ircomm_core.c563
-rw-r--r--net/irda/ircomm/ircomm_event.c246
-rw-r--r--net/irda/ircomm/ircomm_lmp.c350
-rw-r--r--net/irda/ircomm/ircomm_param.c502
-rw-r--r--net/irda/ircomm/ircomm_ttp.c350
-rw-r--r--net/irda/ircomm/ircomm_tty.c1362
-rw-r--r--net/irda/ircomm/ircomm_tty_attach.c987
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c413
-rw-r--r--net/irda/irda_device.c316
-rw-r--r--net/irda/iriap.c1081
-rw-r--r--net/irda/iriap_event.c496
-rw-r--r--net/irda/irias_object.c555
-rw-r--r--net/irda/irlan/Kconfig14
-rw-r--r--net/irda/irlan/Makefile7
-rw-r--r--net/irda/irlan/irlan_client.c559
-rw-r--r--net/irda/irlan/irlan_client_event.c511
-rw-r--r--net/irda/irlan/irlan_common.c1176
-rw-r--r--net/irda/irlan/irlan_eth.c340
-rw-r--r--net/irda/irlan/irlan_event.c60
-rw-r--r--net/irda/irlan/irlan_filter.c240
-rw-r--r--net/irda/irlan/irlan_provider.c408
-rw-r--r--net/irda/irlan/irlan_provider_event.c233
-rw-r--r--net/irda/irlap.c1207
-rw-r--r--net/irda/irlap_event.c2316
-rw-r--r--net/irda/irlap_frame.c1411
-rw-r--r--net/irda/irlmp.c1996
-rw-r--r--net/irda/irlmp_event.c886
-rw-r--r--net/irda/irlmp_frame.c476
-rw-r--r--net/irda/irmod.c199
-rw-r--r--net/irda/irnet/Kconfig13
-rw-r--r--net/irda/irnet/Makefile7
-rw-r--r--net/irda/irnet/irnet.h523
-rw-r--r--net/irda/irnet/irnet_irda.c1885
-rw-r--r--net/irda/irnet/irnet_irda.h178
-rw-r--r--net/irda/irnet/irnet_ppp.c1188
-rw-r--r--net/irda/irnet/irnet_ppp.h119
-rw-r--r--net/irda/irnetlink.c158
-rw-r--r--net/irda/irproc.c97
-rw-r--r--net/irda/irqueue.c913
-rw-r--r--net/irda/irsysctl.c258
-rw-r--r--net/irda/irttp.c1891
-rw-r--r--net/irda/parameters.c584
-rw-r--r--net/irda/qos.c771
-rw-r--r--net/irda/timer.c231
-rw-r--r--net/irda/wrapper.c492
51 files changed, 31832 insertions, 0 deletions
diff --git a/net/irda/Kconfig b/net/irda/Kconfig
new file mode 100644
index 000000000..c8671a7ff
--- /dev/null
+++ b/net/irda/Kconfig
@@ -0,0 +1,96 @@
+#
+# IrDA protocol configuration
+#
+
+menuconfig IRDA
+ depends on NET && !S390
+ tristate "IrDA (infrared) subsystem support"
+ select CRC_CCITT
+ ---help---
+ Say Y here if you want to build support for the IrDA (TM) protocols.
+ The Infrared Data Associations (tm) specifies standards for wireless
+ infrared communication and is supported by most laptops and PDA's.
+
+ To use Linux support for the IrDA (tm) protocols, you will also need
+ some user-space utilities like irattach. For more information, see
+ the file <file:Documentation/networking/irda.txt>. You also want to
+ read the IR-HOWTO, available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you want to exchange bits of data (vCal, vCard) with a PDA, you
+ will need to install some OBEX application, such as OpenObex :
+ <http://sourceforge.net/projects/openobex/>
+
+ To compile this support as a module, choose M here: the module will
+ be called irda.
+
+comment "IrDA protocols"
+ depends on IRDA
+
+source "net/irda/irlan/Kconfig"
+
+source "net/irda/irnet/Kconfig"
+
+source "net/irda/ircomm/Kconfig"
+
+config IRDA_ULTRA
+ bool "Ultra (connectionless) protocol"
+ depends on IRDA
+ help
+ Say Y here to support the connectionless Ultra IRDA protocol.
+ Ultra allows to exchange data over IrDA with really simple devices
+ (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
+ no management frames, simple fixed header).
+ Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
+
+comment "IrDA options"
+ depends on IRDA
+
+config IRDA_CACHE_LAST_LSAP
+ bool "Cache last LSAP"
+ depends on IRDA
+ help
+ Say Y here if you want IrLMP to cache the last LSAP used. This
+ makes sense since most frames will be sent/received on the same
+ connection. Enabling this option will save a hash-lookup per frame.
+
+ If unsure, say Y.
+
+config IRDA_FAST_RR
+ bool "Fast RRs (low latency)"
+ depends on IRDA
+ ---help---
+ Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
+ when acting as a primary station.
+ Disabling this option will make latency over IrDA very bad. Enabling
+ this option will make the IrDA stack send more packet than strictly
+ necessary, thus reduce your battery life (but not that much).
+
+ Fast RR will make IrLAP send out a RR frame immediately when
+ receiving a frame if its own transmit queue is currently empty. This
+ will give a lot of speed improvement when receiving much data since
+ the secondary station will not have to wait the max. turn around
+ time (usually 500ms) before it is allowed to transmit the next time.
+ If the transmit queue of the secondary is also empty, the primary will
+ start backing-off before sending another RR frame, waiting longer
+ each time until the back-off reaches the max. turn around time.
+ This back-off increase in controlled via
+ /proc/sys/net/irda/fast_poll_increase
+
+ If unsure, say Y.
+
+config IRDA_DEBUG
+ bool "Debug information"
+ depends on IRDA
+ help
+ Say Y here if you want the IrDA subsystem to write debug information
+ to your syslog. You can change the debug level in
+ /proc/sys/net/irda/debug .
+ When this option is enabled, the IrDA also perform many extra internal
+ verifications which will usually prevent the kernel to crash in case of
+ bugs.
+
+ If unsure, say Y (since it makes it easier to find the bugs).
+
+source "drivers/net/irda/Kconfig"
+
diff --git a/net/irda/Makefile b/net/irda/Makefile
new file mode 100644
index 000000000..187f6c563
--- /dev/null
+++ b/net/irda/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the Linux IrDA protocol layer.
+#
+
+obj-$(CONFIG_IRDA) += irda.o
+obj-$(CONFIG_IRLAN) += irlan/
+obj-$(CONFIG_IRNET) += irnet/
+obj-$(CONFIG_IRCOMM) += ircomm/
+
+irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \
+ irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \
+ irttp.o irda_device.o irias_object.o wrapper.o af_irda.o \
+ discovery.o parameters.o irnetlink.o irmod.o
+irda-$(CONFIG_PROC_FS) += irproc.o
+irda-$(CONFIG_SYSCTL) += irsysctl.o
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
new file mode 100644
index 000000000..ee0ea25c8
--- /dev/null
+++ b/net/irda/af_irda.c
@@ -0,0 +1,2716 @@
+/*********************************************************************
+ *
+ * Filename: af_irda.c
+ * Version: 0.9
+ * Description: IrDA sockets implementation
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun May 31 10:12:43 1998
+ * Modified at: Sat Dec 25 21:10:23 1999
+ * Modified by: Dag Brattli <dag@brattli.net>
+ * Sources: af_netroom.c, af_ax25.c, af_rose.c, af_x25.c etc.
+ *
+ * Copyright (c) 1999 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1999-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Linux-IrDA now supports four different types of IrDA sockets:
+ *
+ * o SOCK_STREAM: TinyTP connections with SAR disabled. The
+ * max SDU size is 0 for conn. of this type
+ * o SOCK_SEQPACKET: TinyTP connections with SAR enabled. TTP may
+ * fragment the messages, but will preserve
+ * the message boundaries
+ * o SOCK_DGRAM: IRDAPROTO_UNITDATA: TinyTP connections with Unitdata
+ * (unreliable) transfers
+ * IRDAPROTO_ULTRA: Connectionless and unreliable data
+ *
+ ********************************************************************/
+
+#include <linux/capability.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/net.h>
+#include <linux/irda.h>
+#include <linux/poll.h>
+
+#include <asm/ioctls.h> /* TIOCOUTQ, TIOCINQ */
+#include <asm/uaccess.h>
+
+#include <net/sock.h>
+#include <net/tcp_states.h>
+
+#include <net/irda/af_irda.h>
+
+static int irda_create(struct net *net, struct socket *sock, int protocol, int kern);
+
+static const struct proto_ops irda_stream_ops;
+static const struct proto_ops irda_seqpacket_ops;
+static const struct proto_ops irda_dgram_ops;
+
+#ifdef CONFIG_IRDA_ULTRA
+static const struct proto_ops irda_ultra_ops;
+#define ULTRA_MAX_DATA 382
+#endif /* CONFIG_IRDA_ULTRA */
+
+#define IRDA_MAX_HEADER (TTP_MAX_HEADER)
+
+/*
+ * Function irda_data_indication (instance, sap, skb)
+ *
+ * Received some data from TinyTP. Just queue it on the receive queue
+ *
+ */
+static int irda_data_indication(void *instance, void *sap, struct sk_buff *skb)
+{
+ struct irda_sock *self;
+ struct sock *sk;
+ int err;
+
+ self = instance;
+ sk = instance;
+
+ err = sock_queue_rcv_skb(sk, skb);
+ if (err) {
+ pr_debug("%s(), error: no more mem!\n", __func__);
+ self->rx_flow = FLOW_STOP;
+
+ /* When we return error, TTP will need to requeue the skb */
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * Function irda_disconnect_indication (instance, sap, reason, skb)
+ *
+ * Connection has been closed. Check reason to find out why
+ *
+ */
+static void irda_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason, struct sk_buff *skb)
+{
+ struct irda_sock *self;
+ struct sock *sk;
+
+ self = instance;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ /* Don't care about it, but let's not leak it */
+ if(skb)
+ dev_kfree_skb(skb);
+
+ sk = instance;
+ if (sk == NULL) {
+ pr_debug("%s(%p) : BUG : sk is NULL\n",
+ __func__, self);
+ return;
+ }
+
+ /* Prevent race conditions with irda_release() and irda_shutdown() */
+ bh_lock_sock(sk);
+ if (!sock_flag(sk, SOCK_DEAD) && sk->sk_state != TCP_CLOSE) {
+ sk->sk_state = TCP_CLOSE;
+ sk->sk_shutdown |= SEND_SHUTDOWN;
+
+ sk->sk_state_change(sk);
+
+ /* Close our TSAP.
+ * If we leave it open, IrLMP put it back into the list of
+ * unconnected LSAPs. The problem is that any incoming request
+ * can then be matched to this socket (and it will be, because
+ * it is at the head of the list). This would prevent any
+ * listening socket waiting on the same TSAP to get those
+ * requests. Some apps forget to close sockets, or hang to it
+ * a bit too long, so we may stay in this dead state long
+ * enough to be noticed...
+ * Note : all socket function do check sk->sk_state, so we are
+ * safe...
+ * Jean II
+ */
+ if (self->tsap) {
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+ }
+ bh_unlock_sock(sk);
+
+ /* Note : once we are there, there is not much you want to do
+ * with the socket anymore, apart from closing it.
+ * For example, bind() and connect() won't reset sk->sk_err,
+ * sk->sk_shutdown and sk->sk_flags to valid values...
+ * Jean II
+ */
+}
+
+/*
+ * Function irda_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ * Connections has been confirmed by the remote device
+ *
+ */
+static void irda_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size, __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct irda_sock *self;
+ struct sock *sk;
+
+ self = instance;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ sk = instance;
+ if (sk == NULL) {
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ dev_kfree_skb(skb);
+ // Should be ??? skb_queue_tail(&sk->sk_receive_queue, skb);
+
+ /* How much header space do we need to reserve */
+ self->max_header_size = max_header_size;
+
+ /* IrTTP max SDU size in transmit direction */
+ self->max_sdu_size_tx = max_sdu_size;
+
+ /* Find out what the largest chunk of data that we can transmit is */
+ switch (sk->sk_type) {
+ case SOCK_STREAM:
+ if (max_sdu_size != 0) {
+ net_err_ratelimited("%s: max_sdu_size must be 0\n",
+ __func__);
+ return;
+ }
+ self->max_data_size = irttp_get_max_seg_size(self->tsap);
+ break;
+ case SOCK_SEQPACKET:
+ if (max_sdu_size == 0) {
+ net_err_ratelimited("%s: max_sdu_size cannot be 0\n",
+ __func__);
+ return;
+ }
+ self->max_data_size = max_sdu_size;
+ break;
+ default:
+ self->max_data_size = irttp_get_max_seg_size(self->tsap);
+ }
+
+ pr_debug("%s(), max_data_size=%d\n", __func__,
+ self->max_data_size);
+
+ memcpy(&self->qos_tx, qos, sizeof(struct qos_info));
+
+ /* We are now connected! */
+ sk->sk_state = TCP_ESTABLISHED;
+ sk->sk_state_change(sk);
+}
+
+/*
+ * Function irda_connect_indication(instance, sap, qos, max_sdu_size, userdata)
+ *
+ * Incoming connection
+ *
+ */
+static void irda_connect_indication(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_sdu_size,
+ __u8 max_header_size, struct sk_buff *skb)
+{
+ struct irda_sock *self;
+ struct sock *sk;
+
+ self = instance;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ sk = instance;
+ if (sk == NULL) {
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ /* How much header space do we need to reserve */
+ self->max_header_size = max_header_size;
+
+ /* IrTTP max SDU size in transmit direction */
+ self->max_sdu_size_tx = max_sdu_size;
+
+ /* Find out what the largest chunk of data that we can transmit is */
+ switch (sk->sk_type) {
+ case SOCK_STREAM:
+ if (max_sdu_size != 0) {
+ net_err_ratelimited("%s: max_sdu_size must be 0\n",
+ __func__);
+ kfree_skb(skb);
+ return;
+ }
+ self->max_data_size = irttp_get_max_seg_size(self->tsap);
+ break;
+ case SOCK_SEQPACKET:
+ if (max_sdu_size == 0) {
+ net_err_ratelimited("%s: max_sdu_size cannot be 0\n",
+ __func__);
+ kfree_skb(skb);
+ return;
+ }
+ self->max_data_size = max_sdu_size;
+ break;
+ default:
+ self->max_data_size = irttp_get_max_seg_size(self->tsap);
+ }
+
+ pr_debug("%s(), max_data_size=%d\n", __func__,
+ self->max_data_size);
+
+ memcpy(&self->qos_tx, qos, sizeof(struct qos_info));
+
+ skb_queue_tail(&sk->sk_receive_queue, skb);
+ sk->sk_state_change(sk);
+}
+
+/*
+ * Function irda_connect_response (handle)
+ *
+ * Accept incoming connection
+ *
+ */
+static void irda_connect_response(struct irda_sock *self)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, GFP_KERNEL);
+ if (skb == NULL) {
+ pr_debug("%s() Unable to allocate sk_buff!\n",
+ __func__);
+ return;
+ }
+
+ /* Reserve space for MUX_CONTROL and LAP header */
+ skb_reserve(skb, IRDA_MAX_HEADER);
+
+ irttp_connect_response(self->tsap, self->max_sdu_size_rx, skb);
+}
+
+/*
+ * Function irda_flow_indication (instance, sap, flow)
+ *
+ * Used by TinyTP to tell us if it can accept more data or not
+ *
+ */
+static void irda_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+ struct irda_sock *self;
+ struct sock *sk;
+
+ self = instance;
+ sk = instance;
+ BUG_ON(sk == NULL);
+
+ switch (flow) {
+ case FLOW_STOP:
+ pr_debug("%s(), IrTTP wants us to slow down\n",
+ __func__);
+ self->tx_flow = flow;
+ break;
+ case FLOW_START:
+ self->tx_flow = flow;
+ pr_debug("%s(), IrTTP wants us to start again\n",
+ __func__);
+ wake_up_interruptible(sk_sleep(sk));
+ break;
+ default:
+ pr_debug("%s(), Unknown flow command!\n", __func__);
+ /* Unknown flow command, better stop */
+ self->tx_flow = flow;
+ break;
+ }
+}
+
+/*
+ * Function irda_getvalue_confirm (obj_id, value, priv)
+ *
+ * Got answer from remote LM-IAS, just pass object to requester...
+ *
+ * Note : duplicate from above, but we need our own version that
+ * doesn't touch the dtsap_sel and save the full value structure...
+ */
+static void irda_getvalue_confirm(int result, __u16 obj_id,
+ struct ias_value *value, void *priv)
+{
+ struct irda_sock *self;
+
+ self = priv;
+ if (!self) {
+ net_warn_ratelimited("%s: lost myself!\n", __func__);
+ return;
+ }
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ /* We probably don't need to make any more queries */
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+
+ /* Check if request succeeded */
+ if (result != IAS_SUCCESS) {
+ pr_debug("%s(), IAS query failed! (%d)\n", __func__,
+ result);
+
+ self->errno = result; /* We really need it later */
+
+ /* Wake up any processes waiting for result */
+ wake_up_interruptible(&self->query_wait);
+
+ return;
+ }
+
+ /* Pass the object to the caller (so the caller must delete it) */
+ self->ias_result = value;
+ self->errno = 0;
+
+ /* Wake up any processes waiting for result */
+ wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_selective_discovery_indication (discovery)
+ *
+ * Got a selective discovery indication from IrLMP.
+ *
+ * IrLMP is telling us that this node is new and matching our hint bit
+ * filter. Wake up any process waiting for answer...
+ */
+static void irda_selective_discovery_indication(discinfo_t *discovery,
+ DISCOVERY_MODE mode,
+ void *priv)
+{
+ struct irda_sock *self;
+
+ self = priv;
+ if (!self) {
+ net_warn_ratelimited("%s: lost myself!\n", __func__);
+ return;
+ }
+
+ /* Pass parameter to the caller */
+ self->cachedaddr = discovery->daddr;
+
+ /* Wake up process if its waiting for device to be discovered */
+ wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_discovery_timeout (priv)
+ *
+ * Timeout in the selective discovery process
+ *
+ * We were waiting for a node to be discovered, but nothing has come up
+ * so far. Wake up the user and tell him that we failed...
+ */
+static void irda_discovery_timeout(u_long priv)
+{
+ struct irda_sock *self;
+
+ self = (struct irda_sock *) priv;
+ BUG_ON(self == NULL);
+
+ /* Nothing for the caller */
+ self->cachelog = NULL;
+ self->cachedaddr = 0;
+ self->errno = -ETIME;
+
+ /* Wake up process if its still waiting... */
+ wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_open_tsap (self)
+ *
+ * Open local Transport Service Access Point (TSAP)
+ *
+ */
+static int irda_open_tsap(struct irda_sock *self, __u8 tsap_sel, char *name)
+{
+ notify_t notify;
+
+ if (self->tsap) {
+ pr_debug("%s: busy!\n", __func__);
+ return -EBUSY;
+ }
+
+ /* Initialize callbacks to be used by the IrDA stack */
+ irda_notify_init(&notify);
+ notify.connect_confirm = irda_connect_confirm;
+ notify.connect_indication = irda_connect_indication;
+ notify.disconnect_indication = irda_disconnect_indication;
+ notify.data_indication = irda_data_indication;
+ notify.udata_indication = irda_data_indication;
+ notify.flow_indication = irda_flow_indication;
+ notify.instance = self;
+ strncpy(notify.name, name, NOTIFY_MAX_NAME);
+
+ self->tsap = irttp_open_tsap(tsap_sel, DEFAULT_INITIAL_CREDIT,
+ &notify);
+ if (self->tsap == NULL) {
+ pr_debug("%s(), Unable to allocate TSAP!\n",
+ __func__);
+ return -ENOMEM;
+ }
+ /* Remember which TSAP selector we actually got */
+ self->stsap_sel = self->tsap->stsap_sel;
+
+ return 0;
+}
+
+/*
+ * Function irda_open_lsap (self)
+ *
+ * Open local Link Service Access Point (LSAP). Used for opening Ultra
+ * sockets
+ */
+#ifdef CONFIG_IRDA_ULTRA
+static int irda_open_lsap(struct irda_sock *self, int pid)
+{
+ notify_t notify;
+
+ if (self->lsap) {
+ net_warn_ratelimited("%s(), busy!\n", __func__);
+ return -EBUSY;
+ }
+
+ /* Initialize callbacks to be used by the IrDA stack */
+ irda_notify_init(&notify);
+ notify.udata_indication = irda_data_indication;
+ notify.instance = self;
+ strncpy(notify.name, "Ultra", NOTIFY_MAX_NAME);
+
+ self->lsap = irlmp_open_lsap(LSAP_CONNLESS, &notify, pid);
+ if (self->lsap == NULL) {
+ pr_debug("%s(), Unable to allocate LSAP!\n", __func__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irda_find_lsap_sel (self, name)
+ *
+ * Try to lookup LSAP selector in remote LM-IAS
+ *
+ * Basically, we start a IAP query, and then go to sleep. When the query
+ * return, irda_getvalue_confirm will wake us up, and we can examine the
+ * result of the query...
+ * Note that in some case, the query fail even before we go to sleep,
+ * creating some races...
+ */
+static int irda_find_lsap_sel(struct irda_sock *self, char *name)
+{
+ pr_debug("%s(%p, %s)\n", __func__, self, name);
+
+ if (self->iriap) {
+ net_warn_ratelimited("%s(): busy with a previous query\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ irda_getvalue_confirm);
+ if(self->iriap == NULL)
+ return -ENOMEM;
+
+ /* Treat unexpected wakeup as disconnect */
+ self->errno = -EHOSTUNREACH;
+
+ /* Query remote LM-IAS */
+ iriap_getvaluebyclass_request(self->iriap, self->saddr, self->daddr,
+ name, "IrDA:TinyTP:LsapSel");
+
+ /* Wait for answer, if not yet finished (or failed) */
+ if (wait_event_interruptible(self->query_wait, (self->iriap==NULL)))
+ /* Treat signals as disconnect */
+ return -EHOSTUNREACH;
+
+ /* Check what happened */
+ if (self->errno)
+ {
+ /* Requested object/attribute doesn't exist */
+ if((self->errno == IAS_CLASS_UNKNOWN) ||
+ (self->errno == IAS_ATTRIB_UNKNOWN))
+ return -EADDRNOTAVAIL;
+ else
+ return -EHOSTUNREACH;
+ }
+
+ /* Get the remote TSAP selector */
+ switch (self->ias_result->type) {
+ case IAS_INTEGER:
+ pr_debug("%s() int=%d\n",
+ __func__, self->ias_result->t.integer);
+
+ if (self->ias_result->t.integer != -1)
+ self->dtsap_sel = self->ias_result->t.integer;
+ else
+ self->dtsap_sel = 0;
+ break;
+ default:
+ self->dtsap_sel = 0;
+ pr_debug("%s(), bad type!\n", __func__);
+ break;
+ }
+ if (self->ias_result)
+ irias_delete_value(self->ias_result);
+
+ if (self->dtsap_sel)
+ return 0;
+
+ return -EADDRNOTAVAIL;
+}
+
+/*
+ * Function irda_discover_daddr_and_lsap_sel (self, name)
+ *
+ * This try to find a device with the requested service.
+ *
+ * It basically look into the discovery log. For each address in the list,
+ * it queries the LM-IAS of the device to find if this device offer
+ * the requested service.
+ * If there is more than one node supporting the service, we complain
+ * to the user (it should move devices around).
+ * The, we set both the destination address and the lsap selector to point
+ * on the service on the unique device we have found.
+ *
+ * Note : this function fails if there is more than one device in range,
+ * because IrLMP doesn't disconnect the LAP when the last LSAP is closed.
+ * Moreover, we would need to wait the LAP disconnection...
+ */
+static int irda_discover_daddr_and_lsap_sel(struct irda_sock *self, char *name)
+{
+ discinfo_t *discoveries; /* Copy of the discovery log */
+ int number; /* Number of nodes in the log */
+ int i;
+ int err = -ENETUNREACH;
+ __u32 daddr = DEV_ADDR_ANY; /* Address we found the service on */
+ __u8 dtsap_sel = 0x0; /* TSAP associated with it */
+
+ pr_debug("%s(), name=%s\n", __func__, name);
+
+ /* Ask lmp for the current discovery log
+ * Note : we have to use irlmp_get_discoveries(), as opposed
+ * to play with the cachelog directly, because while we are
+ * making our ias query, le log might change... */
+ discoveries = irlmp_get_discoveries(&number, self->mask.word,
+ self->nslots);
+ /* Check if the we got some results */
+ if (discoveries == NULL)
+ return -ENETUNREACH; /* No nodes discovered */
+
+ /*
+ * Now, check all discovered devices (if any), and connect
+ * client only about the services that the client is
+ * interested in...
+ */
+ for(i = 0; i < number; i++) {
+ /* Try the address in the log */
+ self->daddr = discoveries[i].daddr;
+ self->saddr = 0x0;
+ pr_debug("%s(), trying daddr = %08x\n",
+ __func__, self->daddr);
+
+ /* Query remote LM-IAS for this service */
+ err = irda_find_lsap_sel(self, name);
+ switch (err) {
+ case 0:
+ /* We found the requested service */
+ if(daddr != DEV_ADDR_ANY) {
+ pr_debug("%s(), discovered service ''%s'' in two different devices !!!\n",
+ __func__, name);
+ self->daddr = DEV_ADDR_ANY;
+ kfree(discoveries);
+ return -ENOTUNIQ;
+ }
+ /* First time we found that one, save it ! */
+ daddr = self->daddr;
+ dtsap_sel = self->dtsap_sel;
+ break;
+ case -EADDRNOTAVAIL:
+ /* Requested service simply doesn't exist on this node */
+ break;
+ default:
+ /* Something bad did happen :-( */
+ pr_debug("%s(), unexpected IAS query failure\n",
+ __func__);
+ self->daddr = DEV_ADDR_ANY;
+ kfree(discoveries);
+ return -EHOSTUNREACH;
+ }
+ }
+ /* Cleanup our copy of the discovery log */
+ kfree(discoveries);
+
+ /* Check out what we found */
+ if(daddr == DEV_ADDR_ANY) {
+ pr_debug("%s(), cannot discover service ''%s'' in any device !!!\n",
+ __func__, name);
+ self->daddr = DEV_ADDR_ANY;
+ return -EADDRNOTAVAIL;
+ }
+
+ /* Revert back to discovered device & service */
+ self->daddr = daddr;
+ self->saddr = 0x0;
+ self->dtsap_sel = dtsap_sel;
+
+ pr_debug("%s(), discovered requested service ''%s'' at address %08x\n",
+ __func__, name, self->daddr);
+
+ return 0;
+}
+
+/*
+ * Function irda_getname (sock, uaddr, uaddr_len, peer)
+ *
+ * Return the our own, or peers socket address (sockaddr_irda)
+ *
+ */
+static int irda_getname(struct socket *sock, struct sockaddr *uaddr,
+ int *uaddr_len, int peer)
+{
+ struct sockaddr_irda saddr;
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+
+ memset(&saddr, 0, sizeof(saddr));
+ if (peer) {
+ if (sk->sk_state != TCP_ESTABLISHED)
+ return -ENOTCONN;
+
+ saddr.sir_family = AF_IRDA;
+ saddr.sir_lsap_sel = self->dtsap_sel;
+ saddr.sir_addr = self->daddr;
+ } else {
+ saddr.sir_family = AF_IRDA;
+ saddr.sir_lsap_sel = self->stsap_sel;
+ saddr.sir_addr = self->saddr;
+ }
+
+ pr_debug("%s(), tsap_sel = %#x\n", __func__, saddr.sir_lsap_sel);
+ pr_debug("%s(), addr = %08x\n", __func__, saddr.sir_addr);
+
+ /* uaddr_len come to us uninitialised */
+ *uaddr_len = sizeof (struct sockaddr_irda);
+ memcpy(uaddr, &saddr, *uaddr_len);
+
+ return 0;
+}
+
+/*
+ * Function irda_listen (sock, backlog)
+ *
+ * Just move to the listen state
+ *
+ */
+static int irda_listen(struct socket *sock, int backlog)
+{
+ struct sock *sk = sock->sk;
+ int err = -EOPNOTSUPP;
+
+ lock_sock(sk);
+
+ if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
+ (sk->sk_type != SOCK_DGRAM))
+ goto out;
+
+ if (sk->sk_state != TCP_LISTEN) {
+ sk->sk_max_ack_backlog = backlog;
+ sk->sk_state = TCP_LISTEN;
+
+ err = 0;
+ }
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+/*
+ * Function irda_bind (sock, uaddr, addr_len)
+ *
+ * Used by servers to register their well known TSAP
+ *
+ */
+static int irda_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+{
+ struct sock *sk = sock->sk;
+ struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr;
+ struct irda_sock *self = irda_sk(sk);
+ int err;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ if (addr_len != sizeof(struct sockaddr_irda))
+ return -EINVAL;
+
+ lock_sock(sk);
+#ifdef CONFIG_IRDA_ULTRA
+ /* Special care for Ultra sockets */
+ if ((sk->sk_type == SOCK_DGRAM) &&
+ (sk->sk_protocol == IRDAPROTO_ULTRA)) {
+ self->pid = addr->sir_lsap_sel;
+ err = -EOPNOTSUPP;
+ if (self->pid & 0x80) {
+ pr_debug("%s(), extension in PID not supp!\n",
+ __func__);
+ goto out;
+ }
+ err = irda_open_lsap(self, self->pid);
+ if (err < 0)
+ goto out;
+
+ /* Pretend we are connected */
+ sock->state = SS_CONNECTED;
+ sk->sk_state = TCP_ESTABLISHED;
+ err = 0;
+
+ goto out;
+ }
+#endif /* CONFIG_IRDA_ULTRA */
+
+ self->ias_obj = irias_new_object(addr->sir_name, jiffies);
+ err = -ENOMEM;
+ if (self->ias_obj == NULL)
+ goto out;
+
+ err = irda_open_tsap(self, addr->sir_lsap_sel, addr->sir_name);
+ if (err < 0) {
+ irias_delete_object(self->ias_obj);
+ self->ias_obj = NULL;
+ goto out;
+ }
+
+ /* Register with LM-IAS */
+ irias_add_integer_attrib(self->ias_obj, "IrDA:TinyTP:LsapSel",
+ self->stsap_sel, IAS_KERNEL_ATTR);
+ irias_insert_object(self->ias_obj);
+
+ err = 0;
+out:
+ release_sock(sk);
+ return err;
+}
+
+/*
+ * Function irda_accept (sock, newsock, flags)
+ *
+ * Wait for incoming connection
+ *
+ */
+static int irda_accept(struct socket *sock, struct socket *newsock, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *new, *self = irda_sk(sk);
+ struct sock *newsk;
+ struct sk_buff *skb;
+ int err;
+
+ err = irda_create(sock_net(sk), newsock, sk->sk_protocol, 0);
+ if (err)
+ return err;
+
+ err = -EINVAL;
+
+ lock_sock(sk);
+ if (sock->state != SS_UNCONNECTED)
+ goto out;
+
+ if ((sk = sock->sk) == NULL)
+ goto out;
+
+ err = -EOPNOTSUPP;
+ if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
+ (sk->sk_type != SOCK_DGRAM))
+ goto out;
+
+ err = -EINVAL;
+ if (sk->sk_state != TCP_LISTEN)
+ goto out;
+
+ /*
+ * The read queue this time is holding sockets ready to use
+ * hooked into the SABM we saved
+ */
+
+ /*
+ * We can perform the accept only if there is incoming data
+ * on the listening socket.
+ * So, we will block the caller until we receive any data.
+ * If the caller was waiting on select() or poll() before
+ * calling us, the data is waiting for us ;-)
+ * Jean II
+ */
+ while (1) {
+ skb = skb_dequeue(&sk->sk_receive_queue);
+ if (skb)
+ break;
+
+ /* Non blocking operation */
+ err = -EWOULDBLOCK;
+ if (flags & O_NONBLOCK)
+ goto out;
+
+ err = wait_event_interruptible(*(sk_sleep(sk)),
+ skb_peek(&sk->sk_receive_queue));
+ if (err)
+ goto out;
+ }
+
+ newsk = newsock->sk;
+ err = -EIO;
+ if (newsk == NULL)
+ goto out;
+
+ newsk->sk_state = TCP_ESTABLISHED;
+
+ new = irda_sk(newsk);
+
+ /* Now attach up the new socket */
+ new->tsap = irttp_dup(self->tsap, new);
+ err = -EPERM; /* value does not seem to make sense. -arnd */
+ if (!new->tsap) {
+ pr_debug("%s(), dup failed!\n", __func__);
+ kfree_skb(skb);
+ goto out;
+ }
+
+ new->stsap_sel = new->tsap->stsap_sel;
+ new->dtsap_sel = new->tsap->dtsap_sel;
+ new->saddr = irttp_get_saddr(new->tsap);
+ new->daddr = irttp_get_daddr(new->tsap);
+
+ new->max_sdu_size_tx = self->max_sdu_size_tx;
+ new->max_sdu_size_rx = self->max_sdu_size_rx;
+ new->max_data_size = self->max_data_size;
+ new->max_header_size = self->max_header_size;
+
+ memcpy(&new->qos_tx, &self->qos_tx, sizeof(struct qos_info));
+
+ /* Clean up the original one to keep it in listen state */
+ irttp_listen(self->tsap);
+
+ kfree_skb(skb);
+ sk->sk_ack_backlog--;
+
+ newsock->state = SS_CONNECTED;
+
+ irda_connect_response(new);
+ err = 0;
+out:
+ release_sock(sk);
+ return err;
+}
+
+/*
+ * Function irda_connect (sock, uaddr, addr_len, flags)
+ *
+ * Connect to a IrDA device
+ *
+ * The main difference with a "standard" connect is that with IrDA we need
+ * to resolve the service name into a TSAP selector (in TCP, port number
+ * doesn't have to be resolved).
+ * Because of this service name resolution, we can offer "auto-connect",
+ * where we connect to a service without specifying a destination address.
+ *
+ * Note : by consulting "errno", the user space caller may learn the cause
+ * of the failure. Most of them are visible in the function, others may come
+ * from subroutines called and are listed here :
+ * o EBUSY : already processing a connect
+ * o EHOSTUNREACH : bad addr->sir_addr argument
+ * o EADDRNOTAVAIL : bad addr->sir_name argument
+ * o ENOTUNIQ : more than one node has addr->sir_name (auto-connect)
+ * o ENETUNREACH : no node found on the network (auto-connect)
+ */
+static int irda_connect(struct socket *sock, struct sockaddr *uaddr,
+ int addr_len, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr;
+ struct irda_sock *self = irda_sk(sk);
+ int err;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ lock_sock(sk);
+ /* Don't allow connect for Ultra sockets */
+ err = -ESOCKTNOSUPPORT;
+ if ((sk->sk_type == SOCK_DGRAM) && (sk->sk_protocol == IRDAPROTO_ULTRA))
+ goto out;
+
+ if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
+ sock->state = SS_CONNECTED;
+ err = 0;
+ goto out; /* Connect completed during a ERESTARTSYS event */
+ }
+
+ if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) {
+ sock->state = SS_UNCONNECTED;
+ err = -ECONNREFUSED;
+ goto out;
+ }
+
+ err = -EISCONN; /* No reconnect on a seqpacket socket */
+ if (sk->sk_state == TCP_ESTABLISHED)
+ goto out;
+
+ sk->sk_state = TCP_CLOSE;
+ sock->state = SS_UNCONNECTED;
+
+ err = -EINVAL;
+ if (addr_len != sizeof(struct sockaddr_irda))
+ goto out;
+
+ /* Check if user supplied any destination device address */
+ if ((!addr->sir_addr) || (addr->sir_addr == DEV_ADDR_ANY)) {
+ /* Try to find one suitable */
+ err = irda_discover_daddr_and_lsap_sel(self, addr->sir_name);
+ if (err) {
+ pr_debug("%s(), auto-connect failed!\n", __func__);
+ goto out;
+ }
+ } else {
+ /* Use the one provided by the user */
+ self->daddr = addr->sir_addr;
+ pr_debug("%s(), daddr = %08x\n", __func__, self->daddr);
+
+ /* If we don't have a valid service name, we assume the
+ * user want to connect on a specific LSAP. Prevent
+ * the use of invalid LSAPs (IrLMP 1.1 p10). Jean II */
+ if((addr->sir_name[0] != '\0') ||
+ (addr->sir_lsap_sel >= 0x70)) {
+ /* Query remote LM-IAS using service name */
+ err = irda_find_lsap_sel(self, addr->sir_name);
+ if (err) {
+ pr_debug("%s(), connect failed!\n", __func__);
+ goto out;
+ }
+ } else {
+ /* Directly connect to the remote LSAP
+ * specified by the sir_lsap field.
+ * Please use with caution, in IrDA LSAPs are
+ * dynamic and there is no "well-known" LSAP. */
+ self->dtsap_sel = addr->sir_lsap_sel;
+ }
+ }
+
+ /* Check if we have opened a local TSAP */
+ if (!self->tsap)
+ irda_open_tsap(self, LSAP_ANY, addr->sir_name);
+
+ /* Move to connecting socket, start sending Connect Requests */
+ sock->state = SS_CONNECTING;
+ sk->sk_state = TCP_SYN_SENT;
+
+ /* Connect to remote device */
+ err = irttp_connect_request(self->tsap, self->dtsap_sel,
+ self->saddr, self->daddr, NULL,
+ self->max_sdu_size_rx, NULL);
+ if (err) {
+ pr_debug("%s(), connect failed!\n", __func__);
+ goto out;
+ }
+
+ /* Now the loop */
+ err = -EINPROGRESS;
+ if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
+ goto out;
+
+ err = -ERESTARTSYS;
+ if (wait_event_interruptible(*(sk_sleep(sk)),
+ (sk->sk_state != TCP_SYN_SENT)))
+ goto out;
+
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ sock->state = SS_UNCONNECTED;
+ err = sock_error(sk);
+ if (!err)
+ err = -ECONNRESET;
+ goto out;
+ }
+
+ sock->state = SS_CONNECTED;
+
+ /* At this point, IrLMP has assigned our source address */
+ self->saddr = irttp_get_saddr(self->tsap);
+ err = 0;
+out:
+ release_sock(sk);
+ return err;
+}
+
+static struct proto irda_proto = {
+ .name = "IRDA",
+ .owner = THIS_MODULE,
+ .obj_size = sizeof(struct irda_sock),
+};
+
+/*
+ * Function irda_create (sock, protocol)
+ *
+ * Create IrDA socket
+ *
+ */
+static int irda_create(struct net *net, struct socket *sock, int protocol,
+ int kern)
+{
+ struct sock *sk;
+ struct irda_sock *self;
+
+ if (net != &init_net)
+ return -EAFNOSUPPORT;
+
+ /* Check for valid socket type */
+ switch (sock->type) {
+ case SOCK_STREAM: /* For TTP connections with SAR disabled */
+ case SOCK_SEQPACKET: /* For TTP connections with SAR enabled */
+ case SOCK_DGRAM: /* For TTP Unitdata or LMP Ultra transfers */
+ break;
+ default:
+ return -ESOCKTNOSUPPORT;
+ }
+
+ /* Allocate networking socket */
+ sk = sk_alloc(net, PF_IRDA, GFP_KERNEL, &irda_proto);
+ if (sk == NULL)
+ return -ENOMEM;
+
+ self = irda_sk(sk);
+ pr_debug("%s() : self is %p\n", __func__, self);
+
+ init_waitqueue_head(&self->query_wait);
+
+ switch (sock->type) {
+ case SOCK_STREAM:
+ sock->ops = &irda_stream_ops;
+ self->max_sdu_size_rx = TTP_SAR_DISABLE;
+ break;
+ case SOCK_SEQPACKET:
+ sock->ops = &irda_seqpacket_ops;
+ self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+ break;
+ case SOCK_DGRAM:
+ switch (protocol) {
+#ifdef CONFIG_IRDA_ULTRA
+ case IRDAPROTO_ULTRA:
+ sock->ops = &irda_ultra_ops;
+ /* Initialise now, because we may send on unbound
+ * sockets. Jean II */
+ self->max_data_size = ULTRA_MAX_DATA - LMP_PID_HEADER;
+ self->max_header_size = IRDA_MAX_HEADER + LMP_PID_HEADER;
+ break;
+#endif /* CONFIG_IRDA_ULTRA */
+ case IRDAPROTO_UNITDATA:
+ sock->ops = &irda_dgram_ops;
+ /* We let Unitdata conn. be like seqpack conn. */
+ self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+ break;
+ default:
+ sk_free(sk);
+ return -ESOCKTNOSUPPORT;
+ }
+ break;
+ default:
+ sk_free(sk);
+ return -ESOCKTNOSUPPORT;
+ }
+
+ /* Initialise networking socket struct */
+ sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
+ sk->sk_family = PF_IRDA;
+ sk->sk_protocol = protocol;
+
+ /* Register as a client with IrLMP */
+ self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
+ self->mask.word = 0xffff;
+ self->rx_flow = self->tx_flow = FLOW_START;
+ self->nslots = DISCOVERY_DEFAULT_SLOTS;
+ self->daddr = DEV_ADDR_ANY; /* Until we get connected */
+ self->saddr = 0x0; /* so IrLMP assign us any link */
+ return 0;
+}
+
+/*
+ * Function irda_destroy_socket (self)
+ *
+ * Destroy socket
+ *
+ */
+static void irda_destroy_socket(struct irda_sock *self)
+{
+ pr_debug("%s(%p)\n", __func__, self);
+
+ /* Unregister with IrLMP */
+ irlmp_unregister_client(self->ckey);
+ irlmp_unregister_service(self->skey);
+
+ /* Unregister with LM-IAS */
+ if (self->ias_obj) {
+ irias_delete_object(self->ias_obj);
+ self->ias_obj = NULL;
+ }
+
+ if (self->iriap) {
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+ }
+
+ if (self->tsap) {
+ irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+#ifdef CONFIG_IRDA_ULTRA
+ if (self->lsap) {
+ irlmp_close_lsap(self->lsap);
+ self->lsap = NULL;
+ }
+#endif /* CONFIG_IRDA_ULTRA */
+}
+
+/*
+ * Function irda_release (sock)
+ */
+static int irda_release(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+
+ if (sk == NULL)
+ return 0;
+
+ lock_sock(sk);
+ sk->sk_state = TCP_CLOSE;
+ sk->sk_shutdown |= SEND_SHUTDOWN;
+ sk->sk_state_change(sk);
+
+ /* Destroy IrDA socket */
+ irda_destroy_socket(irda_sk(sk));
+
+ sock_orphan(sk);
+ sock->sk = NULL;
+ release_sock(sk);
+
+ /* Purge queues (see sock_init_data()) */
+ skb_queue_purge(&sk->sk_receive_queue);
+
+ /* Destroy networking socket if we are the last reference on it,
+ * i.e. if(sk->sk_refcnt == 0) -> sk_free(sk) */
+ sock_put(sk);
+
+ /* Notes on socket locking and deallocation... - Jean II
+ * In theory we should put pairs of sock_hold() / sock_put() to
+ * prevent the socket to be destroyed whenever there is an
+ * outstanding request or outstanding incoming packet or event.
+ *
+ * 1) This may include IAS request, both in connect and getsockopt.
+ * Unfortunately, the situation is a bit more messy than it looks,
+ * because we close iriap and kfree(self) above.
+ *
+ * 2) This may include selective discovery in getsockopt.
+ * Same stuff as above, irlmp registration and self are gone.
+ *
+ * Probably 1 and 2 may not matter, because it's all triggered
+ * by a process and the socket layer already prevent the
+ * socket to go away while a process is holding it, through
+ * sockfd_put() and fput()...
+ *
+ * 3) This may include deferred TSAP closure. In particular,
+ * we may receive a late irda_disconnect_indication()
+ * Fortunately, (tsap_cb *)->close_pend should protect us
+ * from that.
+ *
+ * I did some testing on SMP, and it looks solid. And the socket
+ * memory leak is now gone... - Jean II
+ */
+
+ return 0;
+}
+
+/*
+ * Function irda_sendmsg (sock, msg, len)
+ *
+ * Send message down to TinyTP. This function is used for both STREAM and
+ * SEQPACK services. This is possible since it forces the client to
+ * fragment the message if necessary
+ */
+static int irda_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self;
+ struct sk_buff *skb;
+ int err = -EPIPE;
+
+ pr_debug("%s(), len=%zd\n", __func__, len);
+
+ /* Note : socket.c set MSG_EOR on SEQPACKET sockets */
+ if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_EOR | MSG_CMSG_COMPAT |
+ MSG_NOSIGNAL)) {
+ return -EINVAL;
+ }
+
+ lock_sock(sk);
+
+ if (sk->sk_shutdown & SEND_SHUTDOWN)
+ goto out_err;
+
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ self = irda_sk(sk);
+
+ /* Check if IrTTP is wants us to slow down */
+
+ if (wait_event_interruptible(*(sk_sleep(sk)),
+ (self->tx_flow != FLOW_STOP || sk->sk_state != TCP_ESTABLISHED))) {
+ err = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* Check if we are still connected */
+ if (sk->sk_state != TCP_ESTABLISHED) {
+ err = -ENOTCONN;
+ goto out;
+ }
+
+ /* Check that we don't send out too big frames */
+ if (len > self->max_data_size) {
+ pr_debug("%s(), Chopping frame from %zd to %d bytes!\n",
+ __func__, len, self->max_data_size);
+ len = self->max_data_size;
+ }
+
+ skb = sock_alloc_send_skb(sk, len + self->max_header_size + 16,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ if (!skb)
+ goto out_err;
+
+ skb_reserve(skb, self->max_header_size + 16);
+ skb_reset_transport_header(skb);
+ skb_put(skb, len);
+ err = memcpy_from_msg(skb_transport_header(skb), msg, len);
+ if (err) {
+ kfree_skb(skb);
+ goto out_err;
+ }
+
+ /*
+ * Just send the message to TinyTP, and let it deal with possible
+ * errors. No need to duplicate all that here
+ */
+ err = irttp_data_request(self->tsap, skb);
+ if (err) {
+ pr_debug("%s(), err=%d\n", __func__, err);
+ goto out_err;
+ }
+
+ release_sock(sk);
+ /* Tell client how much data we actually sent */
+ return len;
+
+out_err:
+ err = sk_stream_error(sk, msg->msg_flags, err);
+out:
+ release_sock(sk);
+ return err;
+
+}
+
+/*
+ * Function irda_recvmsg_dgram (sock, msg, size, flags)
+ *
+ * Try to receive message and copy it to user. The frame is discarded
+ * after being read, regardless of how much the user actually read
+ */
+static int irda_recvmsg_dgram(struct socket *sock, struct msghdr *msg,
+ size_t size, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+ struct sk_buff *skb;
+ size_t copied;
+ int err;
+
+ skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+ flags & MSG_DONTWAIT, &err);
+ if (!skb)
+ return err;
+
+ skb_reset_transport_header(skb);
+ copied = skb->len;
+
+ if (copied > size) {
+ pr_debug("%s(), Received truncated frame (%zd < %zd)!\n",
+ __func__, copied, size);
+ copied = size;
+ msg->msg_flags |= MSG_TRUNC;
+ }
+ skb_copy_datagram_msg(skb, 0, msg, copied);
+
+ skb_free_datagram(sk, skb);
+
+ /*
+ * Check if we have previously stopped IrTTP and we know
+ * have more free space in our rx_queue. If so tell IrTTP
+ * to start delivering frames again before our rx_queue gets
+ * empty
+ */
+ if (self->rx_flow == FLOW_STOP) {
+ if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) {
+ pr_debug("%s(), Starting IrTTP\n", __func__);
+ self->rx_flow = FLOW_START;
+ irttp_flow_request(self->tsap, FLOW_START);
+ }
+ }
+
+ return copied;
+}
+
+/*
+ * Function irda_recvmsg_stream (sock, msg, size, flags)
+ */
+static int irda_recvmsg_stream(struct socket *sock, struct msghdr *msg,
+ size_t size, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+ int noblock = flags & MSG_DONTWAIT;
+ size_t copied = 0;
+ int target, err;
+ long timeo;
+
+ if ((err = sock_error(sk)) < 0)
+ return err;
+
+ if (sock->flags & __SO_ACCEPTCON)
+ return -EINVAL;
+
+ err =-EOPNOTSUPP;
+ if (flags & MSG_OOB)
+ return -EOPNOTSUPP;
+
+ err = 0;
+ target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
+ timeo = sock_rcvtimeo(sk, noblock);
+
+ do {
+ int chunk;
+ struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue);
+
+ if (skb == NULL) {
+ DEFINE_WAIT(wait);
+ err = 0;
+
+ if (copied >= target)
+ break;
+
+ prepare_to_wait_exclusive(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+
+ /*
+ * POSIX 1003.1g mandates this order.
+ */
+ err = sock_error(sk);
+ if (err)
+ ;
+ else if (sk->sk_shutdown & RCV_SHUTDOWN)
+ ;
+ else if (noblock)
+ err = -EAGAIN;
+ else if (signal_pending(current))
+ err = sock_intr_errno(timeo);
+ else if (sk->sk_state != TCP_ESTABLISHED)
+ err = -ENOTCONN;
+ else if (skb_peek(&sk->sk_receive_queue) == NULL)
+ /* Wait process until data arrives */
+ schedule();
+
+ finish_wait(sk_sleep(sk), &wait);
+
+ if (err)
+ return err;
+ if (sk->sk_shutdown & RCV_SHUTDOWN)
+ break;
+
+ continue;
+ }
+
+ chunk = min_t(unsigned int, skb->len, size);
+ if (memcpy_to_msg(msg, skb->data, chunk)) {
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ if (copied == 0)
+ copied = -EFAULT;
+ break;
+ }
+ copied += chunk;
+ size -= chunk;
+
+ /* Mark read part of skb as used */
+ if (!(flags & MSG_PEEK)) {
+ skb_pull(skb, chunk);
+
+ /* put the skb back if we didn't use it up.. */
+ if (skb->len) {
+ pr_debug("%s(), back on q!\n",
+ __func__);
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ break;
+ }
+
+ kfree_skb(skb);
+ } else {
+ pr_debug("%s() questionable!?\n", __func__);
+
+ /* put message back and return */
+ skb_queue_head(&sk->sk_receive_queue, skb);
+ break;
+ }
+ } while (size);
+
+ /*
+ * Check if we have previously stopped IrTTP and we know
+ * have more free space in our rx_queue. If so tell IrTTP
+ * to start delivering frames again before our rx_queue gets
+ * empty
+ */
+ if (self->rx_flow == FLOW_STOP) {
+ if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) {
+ pr_debug("%s(), Starting IrTTP\n", __func__);
+ self->rx_flow = FLOW_START;
+ irttp_flow_request(self->tsap, FLOW_START);
+ }
+ }
+
+ return copied;
+}
+
+/*
+ * Function irda_sendmsg_dgram (sock, msg, len)
+ *
+ * Send message down to TinyTP for the unreliable sequenced
+ * packet service...
+ *
+ */
+static int irda_sendmsg_dgram(struct socket *sock, struct msghdr *msg,
+ size_t len)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self;
+ struct sk_buff *skb;
+ int err;
+
+ pr_debug("%s(), len=%zd\n", __func__, len);
+
+ if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
+ return -EINVAL;
+
+ lock_sock(sk);
+
+ if (sk->sk_shutdown & SEND_SHUTDOWN) {
+ send_sig(SIGPIPE, current, 0);
+ err = -EPIPE;
+ goto out;
+ }
+
+ err = -ENOTCONN;
+ if (sk->sk_state != TCP_ESTABLISHED)
+ goto out;
+
+ self = irda_sk(sk);
+
+ /*
+ * Check that we don't send out too big frames. This is an unreliable
+ * service, so we have no fragmentation and no coalescence
+ */
+ if (len > self->max_data_size) {
+ pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n",
+ __func__, len, self->max_data_size);
+ len = self->max_data_size;
+ }
+
+ skb = sock_alloc_send_skb(sk, len + self->max_header_size,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ err = -ENOBUFS;
+ if (!skb)
+ goto out;
+
+ skb_reserve(skb, self->max_header_size);
+ skb_reset_transport_header(skb);
+
+ pr_debug("%s(), appending user data\n", __func__);
+ skb_put(skb, len);
+ err = memcpy_from_msg(skb_transport_header(skb), msg, len);
+ if (err) {
+ kfree_skb(skb);
+ goto out;
+ }
+
+ /*
+ * Just send the message to TinyTP, and let it deal with possible
+ * errors. No need to duplicate all that here
+ */
+ err = irttp_udata_request(self->tsap, skb);
+ if (err) {
+ pr_debug("%s(), err=%d\n", __func__, err);
+ goto out;
+ }
+
+ release_sock(sk);
+ return len;
+
+out:
+ release_sock(sk);
+ return err;
+}
+
+/*
+ * Function irda_sendmsg_ultra (sock, msg, len)
+ *
+ * Send message down to IrLMP for the unreliable Ultra
+ * packet service...
+ */
+#ifdef CONFIG_IRDA_ULTRA
+static int irda_sendmsg_ultra(struct socket *sock, struct msghdr *msg,
+ size_t len)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self;
+ __u8 pid = 0;
+ int bound = 0;
+ struct sk_buff *skb;
+ int err;
+
+ pr_debug("%s(), len=%zd\n", __func__, len);
+
+ err = -EINVAL;
+ if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
+ return -EINVAL;
+
+ lock_sock(sk);
+
+ err = -EPIPE;
+ if (sk->sk_shutdown & SEND_SHUTDOWN) {
+ send_sig(SIGPIPE, current, 0);
+ goto out;
+ }
+
+ self = irda_sk(sk);
+
+ /* Check if an address was specified with sendto. Jean II */
+ if (msg->msg_name) {
+ DECLARE_SOCKADDR(struct sockaddr_irda *, addr, msg->msg_name);
+ err = -EINVAL;
+ /* Check address, extract pid. Jean II */
+ if (msg->msg_namelen < sizeof(*addr))
+ goto out;
+ if (addr->sir_family != AF_IRDA)
+ goto out;
+
+ pid = addr->sir_lsap_sel;
+ if (pid & 0x80) {
+ pr_debug("%s(), extension in PID not supp!\n",
+ __func__);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+ } else {
+ /* Check that the socket is properly bound to an Ultra
+ * port. Jean II */
+ if ((self->lsap == NULL) ||
+ (sk->sk_state != TCP_ESTABLISHED)) {
+ pr_debug("%s(), socket not bound to Ultra PID.\n",
+ __func__);
+ err = -ENOTCONN;
+ goto out;
+ }
+ /* Use PID from socket */
+ bound = 1;
+ }
+
+ /*
+ * Check that we don't send out too big frames. This is an unreliable
+ * service, so we have no fragmentation and no coalescence
+ */
+ if (len > self->max_data_size) {
+ pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n",
+ __func__, len, self->max_data_size);
+ len = self->max_data_size;
+ }
+
+ skb = sock_alloc_send_skb(sk, len + self->max_header_size,
+ msg->msg_flags & MSG_DONTWAIT, &err);
+ err = -ENOBUFS;
+ if (!skb)
+ goto out;
+
+ skb_reserve(skb, self->max_header_size);
+ skb_reset_transport_header(skb);
+
+ pr_debug("%s(), appending user data\n", __func__);
+ skb_put(skb, len);
+ err = memcpy_from_msg(skb_transport_header(skb), msg, len);
+ if (err) {
+ kfree_skb(skb);
+ goto out;
+ }
+
+ err = irlmp_connless_data_request((bound ? self->lsap : NULL),
+ skb, pid);
+ if (err)
+ pr_debug("%s(), err=%d\n", __func__, err);
+out:
+ release_sock(sk);
+ return err ? : len;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irda_shutdown (sk, how)
+ */
+static int irda_shutdown(struct socket *sock, int how)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ lock_sock(sk);
+
+ sk->sk_state = TCP_CLOSE;
+ sk->sk_shutdown |= SEND_SHUTDOWN;
+ sk->sk_state_change(sk);
+
+ if (self->iriap) {
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+ }
+
+ if (self->tsap) {
+ irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+
+ /* A few cleanup so the socket look as good as new... */
+ self->rx_flow = self->tx_flow = FLOW_START; /* needed ??? */
+ self->daddr = DEV_ADDR_ANY; /* Until we get re-connected */
+ self->saddr = 0x0; /* so IrLMP assign us any link */
+
+ release_sock(sk);
+
+ return 0;
+}
+
+/*
+ * Function irda_poll (file, sock, wait)
+ */
+static unsigned int irda_poll(struct file * file, struct socket *sock,
+ poll_table *wait)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+ unsigned int mask;
+
+ poll_wait(file, sk_sleep(sk), wait);
+ mask = 0;
+
+ /* Exceptional events? */
+ if (sk->sk_err)
+ mask |= POLLERR;
+ if (sk->sk_shutdown & RCV_SHUTDOWN) {
+ pr_debug("%s(), POLLHUP\n", __func__);
+ mask |= POLLHUP;
+ }
+
+ /* Readable? */
+ if (!skb_queue_empty(&sk->sk_receive_queue)) {
+ pr_debug("Socket is readable\n");
+ mask |= POLLIN | POLLRDNORM;
+ }
+
+ /* Connection-based need to check for termination and startup */
+ switch (sk->sk_type) {
+ case SOCK_STREAM:
+ if (sk->sk_state == TCP_CLOSE) {
+ pr_debug("%s(), POLLHUP\n", __func__);
+ mask |= POLLHUP;
+ }
+
+ if (sk->sk_state == TCP_ESTABLISHED) {
+ if ((self->tx_flow == FLOW_START) &&
+ sock_writeable(sk))
+ {
+ mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+ }
+ }
+ break;
+ case SOCK_SEQPACKET:
+ if ((self->tx_flow == FLOW_START) &&
+ sock_writeable(sk))
+ {
+ mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+ }
+ break;
+ case SOCK_DGRAM:
+ if (sock_writeable(sk))
+ mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+ break;
+ default:
+ break;
+ }
+
+ return mask;
+}
+
+/*
+ * Function irda_ioctl (sock, cmd, arg)
+ */
+static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ struct sock *sk = sock->sk;
+ int err;
+
+ pr_debug("%s(), cmd=%#x\n", __func__, cmd);
+
+ err = -EINVAL;
+ switch (cmd) {
+ case TIOCOUTQ: {
+ long amount;
+
+ amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
+ if (amount < 0)
+ amount = 0;
+ err = put_user(amount, (unsigned int __user *)arg);
+ break;
+ }
+
+ case TIOCINQ: {
+ struct sk_buff *skb;
+ long amount = 0L;
+ /* These two are safe on a single CPU system as only user tasks fiddle here */
+ if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
+ amount = skb->len;
+ err = put_user(amount, (unsigned int __user *)arg);
+ break;
+ }
+
+ case SIOCGSTAMP:
+ if (sk != NULL)
+ err = sock_get_timestamp(sk, (struct timeval __user *)arg);
+ break;
+
+ case SIOCGIFADDR:
+ case SIOCSIFADDR:
+ case SIOCGIFDSTADDR:
+ case SIOCSIFDSTADDR:
+ case SIOCGIFBRDADDR:
+ case SIOCSIFBRDADDR:
+ case SIOCGIFNETMASK:
+ case SIOCSIFNETMASK:
+ case SIOCGIFMETRIC:
+ case SIOCSIFMETRIC:
+ break;
+ default:
+ pr_debug("%s(), doing device ioctl!\n", __func__);
+ err = -ENOIOCTLCMD;
+ }
+
+ return err;
+}
+
+#ifdef CONFIG_COMPAT
+/*
+ * Function irda_ioctl (sock, cmd, arg)
+ */
+static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ /*
+ * All IRDA's ioctl are standard ones.
+ */
+ return -ENOIOCTLCMD;
+}
+#endif
+
+/*
+ * Function irda_setsockopt (sock, level, optname, optval, optlen)
+ *
+ * Set some options for the socket
+ *
+ */
+static int irda_setsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, unsigned int optlen)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+ struct irda_ias_set *ias_opt;
+ struct ias_object *ias_obj;
+ struct ias_attrib * ias_attr; /* Attribute in IAS object */
+ int opt, free_ias = 0, err = 0;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ if (level != SOL_IRLMP)
+ return -ENOPROTOOPT;
+
+ lock_sock(sk);
+
+ switch (optname) {
+ case IRLMP_IAS_SET:
+ /* The user want to add an attribute to an existing IAS object
+ * (in the IAS database) or to create a new object with this
+ * attribute.
+ * We first query IAS to know if the object exist, and then
+ * create the right attribute...
+ */
+
+ if (optlen != sizeof(struct irda_ias_set)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+ if (ias_opt == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Copy query to the driver. */
+ if (copy_from_user(ias_opt, optval, optlen)) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Find the object we target.
+ * If the user gives us an empty string, we use the object
+ * associated with this socket. This will workaround
+ * duplicated class name - Jean II */
+ if(ias_opt->irda_class_name[0] == '\0') {
+ if(self->ias_obj == NULL) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+ ias_obj = self->ias_obj;
+ } else
+ ias_obj = irias_find_object(ias_opt->irda_class_name);
+
+ /* Only ROOT can mess with the global IAS database.
+ * Users can only add attributes to the object associated
+ * with the socket they own - Jean II */
+ if((!capable(CAP_NET_ADMIN)) &&
+ ((ias_obj == NULL) || (ias_obj != self->ias_obj))) {
+ kfree(ias_opt);
+ err = -EPERM;
+ goto out;
+ }
+
+ /* If the object doesn't exist, create it */
+ if(ias_obj == (struct ias_object *) NULL) {
+ /* Create a new object */
+ ias_obj = irias_new_object(ias_opt->irda_class_name,
+ jiffies);
+ if (ias_obj == NULL) {
+ kfree(ias_opt);
+ err = -ENOMEM;
+ goto out;
+ }
+ free_ias = 1;
+ }
+
+ /* Do we have the attribute already ? */
+ if(irias_find_attrib(ias_obj, ias_opt->irda_attrib_name)) {
+ kfree(ias_opt);
+ if (free_ias) {
+ kfree(ias_obj->name);
+ kfree(ias_obj);
+ }
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Look at the type */
+ switch(ias_opt->irda_attrib_type) {
+ case IAS_INTEGER:
+ /* Add an integer attribute */
+ irias_add_integer_attrib(
+ ias_obj,
+ ias_opt->irda_attrib_name,
+ ias_opt->attribute.irda_attrib_int,
+ IAS_USER_ATTR);
+ break;
+ case IAS_OCT_SEQ:
+ /* Check length */
+ if(ias_opt->attribute.irda_attrib_octet_seq.len >
+ IAS_MAX_OCTET_STRING) {
+ kfree(ias_opt);
+ if (free_ias) {
+ kfree(ias_obj->name);
+ kfree(ias_obj);
+ }
+
+ err = -EINVAL;
+ goto out;
+ }
+ /* Add an octet sequence attribute */
+ irias_add_octseq_attrib(
+ ias_obj,
+ ias_opt->irda_attrib_name,
+ ias_opt->attribute.irda_attrib_octet_seq.octet_seq,
+ ias_opt->attribute.irda_attrib_octet_seq.len,
+ IAS_USER_ATTR);
+ break;
+ case IAS_STRING:
+ /* Should check charset & co */
+ /* Check length */
+ /* The length is encoded in a __u8, and
+ * IAS_MAX_STRING == 256, so there is no way
+ * userspace can pass us a string too large.
+ * Jean II */
+ /* NULL terminate the string (avoid troubles) */
+ ias_opt->attribute.irda_attrib_string.string[ias_opt->attribute.irda_attrib_string.len] = '\0';
+ /* Add a string attribute */
+ irias_add_string_attrib(
+ ias_obj,
+ ias_opt->irda_attrib_name,
+ ias_opt->attribute.irda_attrib_string.string,
+ IAS_USER_ATTR);
+ break;
+ default :
+ kfree(ias_opt);
+ if (free_ias) {
+ kfree(ias_obj->name);
+ kfree(ias_obj);
+ }
+ err = -EINVAL;
+ goto out;
+ }
+ irias_insert_object(ias_obj);
+ kfree(ias_opt);
+ break;
+ case IRLMP_IAS_DEL:
+ /* The user want to delete an object from our local IAS
+ * database. We just need to query the IAS, check is the
+ * object is not owned by the kernel and delete it.
+ */
+
+ if (optlen != sizeof(struct irda_ias_set)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+ if (ias_opt == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Copy query to the driver. */
+ if (copy_from_user(ias_opt, optval, optlen)) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Find the object we target.
+ * If the user gives us an empty string, we use the object
+ * associated with this socket. This will workaround
+ * duplicated class name - Jean II */
+ if(ias_opt->irda_class_name[0] == '\0')
+ ias_obj = self->ias_obj;
+ else
+ ias_obj = irias_find_object(ias_opt->irda_class_name);
+ if(ias_obj == (struct ias_object *) NULL) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Only ROOT can mess with the global IAS database.
+ * Users can only del attributes from the object associated
+ * with the socket they own - Jean II */
+ if((!capable(CAP_NET_ADMIN)) &&
+ ((ias_obj == NULL) || (ias_obj != self->ias_obj))) {
+ kfree(ias_opt);
+ err = -EPERM;
+ goto out;
+ }
+
+ /* Find the attribute (in the object) we target */
+ ias_attr = irias_find_attrib(ias_obj,
+ ias_opt->irda_attrib_name);
+ if(ias_attr == (struct ias_attrib *) NULL) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Check is the user space own the object */
+ if(ias_attr->value->owner != IAS_USER_ATTR) {
+ pr_debug("%s(), attempting to delete a kernel attribute\n",
+ __func__);
+ kfree(ias_opt);
+ err = -EPERM;
+ goto out;
+ }
+
+ /* Remove the attribute (and maybe the object) */
+ irias_delete_attrib(ias_obj, ias_attr, 1);
+ kfree(ias_opt);
+ break;
+ case IRLMP_MAX_SDU_SIZE:
+ if (optlen < sizeof(int)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (get_user(opt, (int __user *)optval)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Only possible for a seqpacket service (TTP with SAR) */
+ if (sk->sk_type != SOCK_SEQPACKET) {
+ pr_debug("%s(), setting max_sdu_size = %d\n",
+ __func__, opt);
+ self->max_sdu_size_rx = opt;
+ } else {
+ net_warn_ratelimited("%s: not allowed to set MAXSDUSIZE for this socket type!\n",
+ __func__);
+ err = -ENOPROTOOPT;
+ goto out;
+ }
+ break;
+ case IRLMP_HINTS_SET:
+ if (optlen < sizeof(int)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* The input is really a (__u8 hints[2]), easier as an int */
+ if (get_user(opt, (int __user *)optval)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Unregister any old registration */
+ if (self->skey)
+ irlmp_unregister_service(self->skey);
+
+ self->skey = irlmp_register_service((__u16) opt);
+ break;
+ case IRLMP_HINT_MASK_SET:
+ /* As opposed to the previous case which set the hint bits
+ * that we advertise, this one set the filter we use when
+ * making a discovery (nodes which don't match any hint
+ * bit in the mask are not reported).
+ */
+ if (optlen < sizeof(int)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* The input is really a (__u8 hints[2]), easier as an int */
+ if (get_user(opt, (int __user *)optval)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Set the new hint mask */
+ self->mask.word = (__u16) opt;
+ /* Mask out extension bits */
+ self->mask.word &= 0x7f7f;
+ /* Check if no bits */
+ if(!self->mask.word)
+ self->mask.word = 0xFFFF;
+
+ break;
+ default:
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+out:
+ release_sock(sk);
+
+ return err;
+}
+
+/*
+ * Function irda_extract_ias_value(ias_opt, ias_value)
+ *
+ * Translate internal IAS value structure to the user space representation
+ *
+ * The external representation of IAS values, as we exchange them with
+ * user space program is quite different from the internal representation,
+ * as stored in the IAS database (because we need a flat structure for
+ * crossing kernel boundary).
+ * This function transform the former in the latter. We also check
+ * that the value type is valid.
+ */
+static int irda_extract_ias_value(struct irda_ias_set *ias_opt,
+ struct ias_value *ias_value)
+{
+ /* Look at the type */
+ switch (ias_value->type) {
+ case IAS_INTEGER:
+ /* Copy the integer */
+ ias_opt->attribute.irda_attrib_int = ias_value->t.integer;
+ break;
+ case IAS_OCT_SEQ:
+ /* Set length */
+ ias_opt->attribute.irda_attrib_octet_seq.len = ias_value->len;
+ /* Copy over */
+ memcpy(ias_opt->attribute.irda_attrib_octet_seq.octet_seq,
+ ias_value->t.oct_seq, ias_value->len);
+ break;
+ case IAS_STRING:
+ /* Set length */
+ ias_opt->attribute.irda_attrib_string.len = ias_value->len;
+ ias_opt->attribute.irda_attrib_string.charset = ias_value->charset;
+ /* Copy over */
+ memcpy(ias_opt->attribute.irda_attrib_string.string,
+ ias_value->t.string, ias_value->len);
+ /* NULL terminate the string (avoid troubles) */
+ ias_opt->attribute.irda_attrib_string.string[ias_value->len] = '\0';
+ break;
+ case IAS_MISSING:
+ default :
+ return -EINVAL;
+ }
+
+ /* Copy type over */
+ ias_opt->irda_attrib_type = ias_value->type;
+
+ return 0;
+}
+
+/*
+ * Function irda_getsockopt (sock, level, optname, optval, optlen)
+ */
+static int irda_getsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, int __user *optlen)
+{
+ struct sock *sk = sock->sk;
+ struct irda_sock *self = irda_sk(sk);
+ struct irda_device_list list;
+ struct irda_device_info *discoveries;
+ struct irda_ias_set * ias_opt; /* IAS get/query params */
+ struct ias_object * ias_obj; /* Object in IAS */
+ struct ias_attrib * ias_attr; /* Attribute in IAS object */
+ int daddr = DEV_ADDR_ANY; /* Dest address for IAS queries */
+ int val = 0;
+ int len = 0;
+ int err = 0;
+ int offset, total;
+
+ pr_debug("%s(%p)\n", __func__, self);
+
+ if (level != SOL_IRLMP)
+ return -ENOPROTOOPT;
+
+ if (get_user(len, optlen))
+ return -EFAULT;
+
+ if(len < 0)
+ return -EINVAL;
+
+ lock_sock(sk);
+
+ switch (optname) {
+ case IRLMP_ENUMDEVICES:
+
+ /* Offset to first device entry */
+ offset = sizeof(struct irda_device_list) -
+ sizeof(struct irda_device_info);
+
+ if (len < offset) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Ask lmp for the current discovery log */
+ discoveries = irlmp_get_discoveries(&list.len, self->mask.word,
+ self->nslots);
+ /* Check if the we got some results */
+ if (discoveries == NULL) {
+ err = -EAGAIN;
+ goto out; /* Didn't find any devices */
+ }
+
+ /* Write total list length back to client */
+ if (copy_to_user(optval, &list, offset))
+ err = -EFAULT;
+
+ /* Copy the list itself - watch for overflow */
+ if (list.len > 2048) {
+ err = -EINVAL;
+ goto bed;
+ }
+ total = offset + (list.len * sizeof(struct irda_device_info));
+ if (total > len)
+ total = len;
+ if (copy_to_user(optval+offset, discoveries, total - offset))
+ err = -EFAULT;
+
+ /* Write total number of bytes used back to client */
+ if (put_user(total, optlen))
+ err = -EFAULT;
+bed:
+ /* Free up our buffer */
+ kfree(discoveries);
+ break;
+ case IRLMP_MAX_SDU_SIZE:
+ val = self->max_data_size;
+ len = sizeof(int);
+ if (put_user(len, optlen)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ if (copy_to_user(optval, &val, len)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ break;
+ case IRLMP_IAS_GET:
+ /* The user want an object from our local IAS database.
+ * We just need to query the IAS and return the value
+ * that we found */
+
+ /* Check that the user has allocated the right space for us */
+ if (len != sizeof(struct irda_ias_set)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+ if (ias_opt == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Copy query to the driver. */
+ if (copy_from_user(ias_opt, optval, len)) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Find the object we target.
+ * If the user gives us an empty string, we use the object
+ * associated with this socket. This will workaround
+ * duplicated class name - Jean II */
+ if(ias_opt->irda_class_name[0] == '\0')
+ ias_obj = self->ias_obj;
+ else
+ ias_obj = irias_find_object(ias_opt->irda_class_name);
+ if(ias_obj == (struct ias_object *) NULL) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Find the attribute (in the object) we target */
+ ias_attr = irias_find_attrib(ias_obj,
+ ias_opt->irda_attrib_name);
+ if(ias_attr == (struct ias_attrib *) NULL) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Translate from internal to user structure */
+ err = irda_extract_ias_value(ias_opt, ias_attr->value);
+ if(err) {
+ kfree(ias_opt);
+ goto out;
+ }
+
+ /* Copy reply to the user */
+ if (copy_to_user(optval, ias_opt,
+ sizeof(struct irda_ias_set))) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+ /* Note : don't need to put optlen, we checked it */
+ kfree(ias_opt);
+ break;
+ case IRLMP_IAS_QUERY:
+ /* The user want an object from a remote IAS database.
+ * We need to use IAP to query the remote database and
+ * then wait for the answer to come back. */
+
+ /* Check that the user has allocated the right space for us */
+ if (len != sizeof(struct irda_ias_set)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+ if (ias_opt == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Copy query to the driver. */
+ if (copy_from_user(ias_opt, optval, len)) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* At this point, there are two cases...
+ * 1) the socket is connected - that's the easy case, we
+ * just query the device we are connected to...
+ * 2) the socket is not connected - the user doesn't want
+ * to connect and/or may not have a valid service name
+ * (so can't create a fake connection). In this case,
+ * we assume that the user pass us a valid destination
+ * address in the requesting structure...
+ */
+ if(self->daddr != DEV_ADDR_ANY) {
+ /* We are connected - reuse known daddr */
+ daddr = self->daddr;
+ } else {
+ /* We are not connected, we must specify a valid
+ * destination address */
+ daddr = ias_opt->daddr;
+ if((!daddr) || (daddr == DEV_ADDR_ANY)) {
+ kfree(ias_opt);
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
+ /* Check that we can proceed with IAP */
+ if (self->iriap) {
+ net_warn_ratelimited("%s: busy with a previous query\n",
+ __func__);
+ kfree(ias_opt);
+ err = -EBUSY;
+ goto out;
+ }
+
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ irda_getvalue_confirm);
+
+ if (self->iriap == NULL) {
+ kfree(ias_opt);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Treat unexpected wakeup as disconnect */
+ self->errno = -EHOSTUNREACH;
+
+ /* Query remote LM-IAS */
+ iriap_getvaluebyclass_request(self->iriap,
+ self->saddr, daddr,
+ ias_opt->irda_class_name,
+ ias_opt->irda_attrib_name);
+
+ /* Wait for answer, if not yet finished (or failed) */
+ if (wait_event_interruptible(self->query_wait,
+ (self->iriap == NULL))) {
+ /* pending request uses copy of ias_opt-content
+ * we can free it regardless! */
+ kfree(ias_opt);
+ /* Treat signals as disconnect */
+ err = -EHOSTUNREACH;
+ goto out;
+ }
+
+ /* Check what happened */
+ if (self->errno)
+ {
+ kfree(ias_opt);
+ /* Requested object/attribute doesn't exist */
+ if((self->errno == IAS_CLASS_UNKNOWN) ||
+ (self->errno == IAS_ATTRIB_UNKNOWN))
+ err = -EADDRNOTAVAIL;
+ else
+ err = -EHOSTUNREACH;
+
+ goto out;
+ }
+
+ /* Translate from internal to user structure */
+ err = irda_extract_ias_value(ias_opt, self->ias_result);
+ if (self->ias_result)
+ irias_delete_value(self->ias_result);
+ if (err) {
+ kfree(ias_opt);
+ goto out;
+ }
+
+ /* Copy reply to the user */
+ if (copy_to_user(optval, ias_opt,
+ sizeof(struct irda_ias_set))) {
+ kfree(ias_opt);
+ err = -EFAULT;
+ goto out;
+ }
+ /* Note : don't need to put optlen, we checked it */
+ kfree(ias_opt);
+ break;
+ case IRLMP_WAITDEVICE:
+ /* This function is just another way of seeing life ;-)
+ * IRLMP_ENUMDEVICES assumes that you have a static network,
+ * and that you just want to pick one of the devices present.
+ * On the other hand, in here we assume that no device is
+ * present and that at some point in the future a device will
+ * come into range. When this device arrive, we just wake
+ * up the caller, so that he has time to connect to it before
+ * the device goes away...
+ * Note : once the node has been discovered for more than a
+ * few second, it won't trigger this function, unless it
+ * goes away and come back changes its hint bits (so we
+ * might call it IRLMP_WAITNEWDEVICE).
+ */
+
+ /* Check that the user is passing us an int */
+ if (len != sizeof(int)) {
+ err = -EINVAL;
+ goto out;
+ }
+ /* Get timeout in ms (max time we block the caller) */
+ if (get_user(val, (int __user *)optval)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* Tell IrLMP we want to be notified */
+ irlmp_update_client(self->ckey, self->mask.word,
+ irda_selective_discovery_indication,
+ NULL, (void *) self);
+
+ /* Do some discovery (and also return cached results) */
+ irlmp_discovery_request(self->nslots);
+
+ /* Wait until a node is discovered */
+ if (!self->cachedaddr) {
+ pr_debug("%s(), nothing discovered yet, going to sleep...\n",
+ __func__);
+
+ /* Set watchdog timer to expire in <val> ms. */
+ self->errno = 0;
+ setup_timer(&self->watchdog, irda_discovery_timeout,
+ (unsigned long)self);
+ mod_timer(&self->watchdog,
+ jiffies + msecs_to_jiffies(val));
+
+ /* Wait for IR-LMP to call us back */
+ err = __wait_event_interruptible(self->query_wait,
+ (self->cachedaddr != 0 || self->errno == -ETIME));
+
+ /* If watchdog is still activated, kill it! */
+ del_timer(&(self->watchdog));
+
+ pr_debug("%s(), ...waking up !\n", __func__);
+
+ if (err != 0)
+ goto out;
+ }
+ else
+ pr_debug("%s(), found immediately !\n",
+ __func__);
+
+ /* Tell IrLMP that we have been notified */
+ irlmp_update_client(self->ckey, self->mask.word,
+ NULL, NULL, NULL);
+
+ /* Check if the we got some results */
+ if (!self->cachedaddr) {
+ err = -EAGAIN; /* Didn't find any devices */
+ goto out;
+ }
+ daddr = self->cachedaddr;
+ /* Cleanup */
+ self->cachedaddr = 0;
+
+ /* We return the daddr of the device that trigger the
+ * wakeup. As irlmp pass us only the new devices, we
+ * are sure that it's not an old device.
+ * If the user want more details, he should query
+ * the whole discovery log and pick one device...
+ */
+ if (put_user(daddr, (int __user *)optval)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ break;
+ default:
+ err = -ENOPROTOOPT;
+ }
+
+out:
+
+ release_sock(sk);
+
+ return err;
+}
+
+static const struct net_proto_family irda_family_ops = {
+ .family = PF_IRDA,
+ .create = irda_create,
+ .owner = THIS_MODULE,
+};
+
+static const struct proto_ops irda_stream_ops = {
+ .family = PF_IRDA,
+ .owner = THIS_MODULE,
+ .release = irda_release,
+ .bind = irda_bind,
+ .connect = irda_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = irda_accept,
+ .getname = irda_getname,
+ .poll = irda_poll,
+ .ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
+ .listen = irda_listen,
+ .shutdown = irda_shutdown,
+ .setsockopt = irda_setsockopt,
+ .getsockopt = irda_getsockopt,
+ .sendmsg = irda_sendmsg,
+ .recvmsg = irda_recvmsg_stream,
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage,
+};
+
+static const struct proto_ops irda_seqpacket_ops = {
+ .family = PF_IRDA,
+ .owner = THIS_MODULE,
+ .release = irda_release,
+ .bind = irda_bind,
+ .connect = irda_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = irda_accept,
+ .getname = irda_getname,
+ .poll = datagram_poll,
+ .ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
+ .listen = irda_listen,
+ .shutdown = irda_shutdown,
+ .setsockopt = irda_setsockopt,
+ .getsockopt = irda_getsockopt,
+ .sendmsg = irda_sendmsg,
+ .recvmsg = irda_recvmsg_dgram,
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage,
+};
+
+static const struct proto_ops irda_dgram_ops = {
+ .family = PF_IRDA,
+ .owner = THIS_MODULE,
+ .release = irda_release,
+ .bind = irda_bind,
+ .connect = irda_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = irda_accept,
+ .getname = irda_getname,
+ .poll = datagram_poll,
+ .ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
+ .listen = irda_listen,
+ .shutdown = irda_shutdown,
+ .setsockopt = irda_setsockopt,
+ .getsockopt = irda_getsockopt,
+ .sendmsg = irda_sendmsg_dgram,
+ .recvmsg = irda_recvmsg_dgram,
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage,
+};
+
+#ifdef CONFIG_IRDA_ULTRA
+static const struct proto_ops irda_ultra_ops = {
+ .family = PF_IRDA,
+ .owner = THIS_MODULE,
+ .release = irda_release,
+ .bind = irda_bind,
+ .connect = sock_no_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = sock_no_accept,
+ .getname = irda_getname,
+ .poll = datagram_poll,
+ .ioctl = irda_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = irda_compat_ioctl,
+#endif
+ .listen = sock_no_listen,
+ .shutdown = irda_shutdown,
+ .setsockopt = irda_setsockopt,
+ .getsockopt = irda_getsockopt,
+ .sendmsg = irda_sendmsg_ultra,
+ .recvmsg = irda_recvmsg_dgram,
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage,
+};
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irsock_init (pro)
+ *
+ * Initialize IrDA protocol
+ *
+ */
+int __init irsock_init(void)
+{
+ int rc = proto_register(&irda_proto, 0);
+
+ if (rc == 0)
+ rc = sock_register(&irda_family_ops);
+
+ return rc;
+}
+
+/*
+ * Function irsock_cleanup (void)
+ *
+ * Remove IrDA protocol
+ *
+ */
+void irsock_cleanup(void)
+{
+ sock_unregister(PF_IRDA);
+ proto_unregister(&irda_proto);
+}
diff --git a/net/irda/discovery.c b/net/irda/discovery.c
new file mode 100644
index 000000000..364d70aed
--- /dev/null
+++ b/net/irda/discovery.c
@@ -0,0 +1,417 @@
+/*********************************************************************
+ *
+ * Filename: discovery.c
+ * Version: 0.1
+ * Description: Routines for handling discoveries at the IrLMP layer
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Apr 6 15:33:50 1999
+ * Modified at: Sat Oct 9 17:11:31 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Modified at: Fri May 28 3:11 CST 1999
+ * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/string.h>
+#include <linux/socket.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+
+#include <net/irda/discovery.h>
+
+#include <asm/unaligned.h>
+
+/*
+ * Function irlmp_add_discovery (cachelog, discovery)
+ *
+ * Add a new discovery to the cachelog, and remove any old discoveries
+ * from the same device
+ *
+ * Note : we try to preserve the time this device was *first* discovered
+ * (as opposed to the time of last discovery used for cleanup). This is
+ * used by clients waiting for discovery events to tell if the device
+ * discovered is "new" or just the same old one. They can't rely there
+ * on a binary flag (new/old), because not all discovery events are
+ * propagated to them, and they might not always listen, so they would
+ * miss some new devices popping up...
+ * Jean II
+ */
+void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *new)
+{
+ discovery_t *discovery, *node;
+ unsigned long flags;
+
+ /* Set time of first discovery if node is new (see below) */
+ new->firststamp = new->timestamp;
+
+ spin_lock_irqsave(&cachelog->hb_spinlock, flags);
+
+ /*
+ * Remove all discoveries of devices that has previously been
+ * discovered on the same link with the same name (info), or the
+ * same daddr. We do this since some devices (mostly PDAs) change
+ * their device address between every discovery.
+ */
+ discovery = (discovery_t *) hashbin_get_first(cachelog);
+ while (discovery != NULL ) {
+ node = discovery;
+
+ /* Be sure to stay one item ahead */
+ discovery = (discovery_t *) hashbin_get_next(cachelog);
+
+ if ((node->data.saddr == new->data.saddr) &&
+ ((node->data.daddr == new->data.daddr) ||
+ (strcmp(node->data.info, new->data.info) == 0)))
+ {
+ /* This discovery is a previous discovery
+ * from the same device, so just remove it
+ */
+ hashbin_remove_this(cachelog, (irda_queue_t *) node);
+ /* Check if hints bits are unchanged */
+ if (get_unaligned((__u16 *)node->data.hints) == get_unaligned((__u16 *)new->data.hints))
+ /* Set time of first discovery for this node */
+ new->firststamp = node->firststamp;
+ kfree(node);
+ }
+ }
+
+ /* Insert the new and updated version */
+ hashbin_insert(cachelog, (irda_queue_t *) new, new->data.daddr, NULL);
+
+ spin_unlock_irqrestore(&cachelog->hb_spinlock, flags);
+}
+
+/*
+ * Function irlmp_add_discovery_log (cachelog, log)
+ *
+ * Merge a disovery log into the cachelog.
+ *
+ */
+void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log)
+{
+ discovery_t *discovery;
+
+ /*
+ * If log is missing this means that IrLAP was unable to perform the
+ * discovery, so restart discovery again with just the half timeout
+ * of the normal one.
+ */
+ /* Well... It means that there was nobody out there - Jean II */
+ if (log == NULL) {
+ /* irlmp_start_discovery_timer(irlmp, 150); */
+ return;
+ }
+
+ /*
+ * Locking : we are the only owner of this discovery log, so
+ * no need to lock it.
+ * We just need to lock the global log in irlmp_add_discovery().
+ */
+ discovery = (discovery_t *) hashbin_remove_first(log);
+ while (discovery != NULL) {
+ irlmp_add_discovery(cachelog, discovery);
+
+ discovery = (discovery_t *) hashbin_remove_first(log);
+ }
+
+ /* Delete the now empty log */
+ hashbin_delete(log, (FREE_FUNC) kfree);
+}
+
+/*
+ * Function irlmp_expire_discoveries (log, saddr, force)
+ *
+ * Go through all discoveries and expire all that has stayed too long
+ *
+ * Note : this assume that IrLAP won't change its saddr, which
+ * currently is a valid assumption...
+ */
+void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force)
+{
+ discovery_t * discovery;
+ discovery_t * curr;
+ unsigned long flags;
+ discinfo_t * buffer = NULL;
+ int n; /* Size of the full log */
+ int i = 0; /* How many we expired */
+
+ IRDA_ASSERT(log != NULL, return;);
+ spin_lock_irqsave(&log->hb_spinlock, flags);
+
+ discovery = (discovery_t *) hashbin_get_first(log);
+ while (discovery != NULL) {
+ /* Be sure to be one item ahead */
+ curr = discovery;
+ discovery = (discovery_t *) hashbin_get_next(log);
+
+ /* Test if it's time to expire this discovery */
+ if ((curr->data.saddr == saddr) &&
+ (force ||
+ ((jiffies - curr->timestamp) > DISCOVERY_EXPIRE_TIMEOUT)))
+ {
+ /* Create buffer as needed.
+ * As this function get called a lot and most time
+ * we don't have anything to put in the log (we are
+ * quite picky), we can save a lot of overhead
+ * by not calling kmalloc. Jean II */
+ if(buffer == NULL) {
+ /* Create the client specific buffer */
+ n = HASHBIN_GET_SIZE(log);
+ buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC);
+ if (buffer == NULL) {
+ spin_unlock_irqrestore(&log->hb_spinlock, flags);
+ return;
+ }
+
+ }
+
+ /* Copy discovery information */
+ memcpy(&(buffer[i]), &(curr->data),
+ sizeof(discinfo_t));
+ i++;
+
+ /* Remove it from the log */
+ curr = hashbin_remove_this(log, (irda_queue_t *) curr);
+ kfree(curr);
+ }
+ }
+
+ /* Drop the spinlock before calling the higher layers, as
+ * we can't guarantee they won't call us back and create a
+ * deadlock. We will work on our own private data, so we
+ * don't care to be interrupted. - Jean II */
+ spin_unlock_irqrestore(&log->hb_spinlock, flags);
+
+ if(buffer == NULL)
+ return;
+
+ /* Tell IrLMP and registered clients about it */
+ irlmp_discovery_expiry(buffer, i);
+
+ /* Free up our buffer */
+ kfree(buffer);
+}
+
+#if 0
+/*
+ * Function irlmp_dump_discoveries (log)
+ *
+ * Print out all discoveries in log
+ *
+ */
+void irlmp_dump_discoveries(hashbin_t *log)
+{
+ discovery_t *discovery;
+
+ IRDA_ASSERT(log != NULL, return;);
+
+ discovery = (discovery_t *) hashbin_get_first(log);
+ while (discovery != NULL) {
+ pr_debug("Discovery:\n");
+ pr_debug(" daddr=%08x\n", discovery->data.daddr);
+ pr_debug(" saddr=%08x\n", discovery->data.saddr);
+ pr_debug(" nickname=%s\n", discovery->data.info);
+
+ discovery = (discovery_t *) hashbin_get_next(log);
+ }
+}
+#endif
+
+/*
+ * Function irlmp_copy_discoveries (log, pn, mask)
+ *
+ * Copy all discoveries in a buffer
+ *
+ * This function implement a safe way for lmp clients to access the
+ * discovery log. The basic problem is that we don't want the log
+ * to change (add/remove) while the client is reading it. If the
+ * lmp client manipulate directly the hashbin, he is sure to get
+ * into troubles...
+ * The idea is that we copy all the current discovery log in a buffer
+ * which is specific to the client and pass this copy to him. As we
+ * do this operation with the spinlock grabbed, we are safe...
+ * Note : we don't want those clients to grab the spinlock, because
+ * we have no control on how long they will hold it...
+ * Note : we choose to copy the log in "struct irda_device_info" to
+ * save space...
+ * Note : the client must kfree himself() the log...
+ * Jean II
+ */
+struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn,
+ __u16 mask, int old_entries)
+{
+ discovery_t * discovery;
+ unsigned long flags;
+ discinfo_t * buffer = NULL;
+ int j_timeout = (sysctl_discovery_timeout * HZ);
+ int n; /* Size of the full log */
+ int i = 0; /* How many we picked */
+
+ IRDA_ASSERT(pn != NULL, return NULL;);
+ IRDA_ASSERT(log != NULL, return NULL;);
+
+ /* Save spin lock */
+ spin_lock_irqsave(&log->hb_spinlock, flags);
+
+ discovery = (discovery_t *) hashbin_get_first(log);
+ while (discovery != NULL) {
+ /* Mask out the ones we don't want :
+ * We want to match the discovery mask, and to get only
+ * the most recent one (unless we want old ones) */
+ if ((get_unaligned((__u16 *)discovery->data.hints) & mask) &&
+ ((old_entries) ||
+ ((jiffies - discovery->firststamp) < j_timeout))) {
+ /* Create buffer as needed.
+ * As this function get called a lot and most time
+ * we don't have anything to put in the log (we are
+ * quite picky), we can save a lot of overhead
+ * by not calling kmalloc. Jean II */
+ if(buffer == NULL) {
+ /* Create the client specific buffer */
+ n = HASHBIN_GET_SIZE(log);
+ buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC);
+ if (buffer == NULL) {
+ spin_unlock_irqrestore(&log->hb_spinlock, flags);
+ return NULL;
+ }
+
+ }
+
+ /* Copy discovery information */
+ memcpy(&(buffer[i]), &(discovery->data),
+ sizeof(discinfo_t));
+ i++;
+ }
+ discovery = (discovery_t *) hashbin_get_next(log);
+ }
+
+ spin_unlock_irqrestore(&log->hb_spinlock, flags);
+
+ /* Get the actual number of device in the buffer and return */
+ *pn = i;
+ return buffer;
+}
+
+#ifdef CONFIG_PROC_FS
+static inline discovery_t *discovery_seq_idx(loff_t pos)
+
+{
+ discovery_t *discovery;
+
+ for (discovery = (discovery_t *) hashbin_get_first(irlmp->cachelog);
+ discovery != NULL;
+ discovery = (discovery_t *) hashbin_get_next(irlmp->cachelog)) {
+ if (pos-- == 0)
+ break;
+ }
+
+ return discovery;
+}
+
+static void *discovery_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ spin_lock_irq(&irlmp->cachelog->hb_spinlock);
+ return *pos ? discovery_seq_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *discovery_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+ return (v == SEQ_START_TOKEN)
+ ? (void *) hashbin_get_first(irlmp->cachelog)
+ : (void *) hashbin_get_next(irlmp->cachelog);
+}
+
+static void discovery_seq_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_irq(&irlmp->cachelog->hb_spinlock);
+}
+
+static int discovery_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_puts(seq, "IrLMP: Discovery log:\n\n");
+ else {
+ const discovery_t *discovery = v;
+
+ seq_printf(seq, "nickname: %s, hint: 0x%02x%02x",
+ discovery->data.info,
+ discovery->data.hints[0],
+ discovery->data.hints[1]);
+#if 0
+ if ( discovery->data.hints[0] & HINT_PNP)
+ seq_puts(seq, "PnP Compatible ");
+ if ( discovery->data.hints[0] & HINT_PDA)
+ seq_puts(seq, "PDA/Palmtop ");
+ if ( discovery->data.hints[0] & HINT_COMPUTER)
+ seq_puts(seq, "Computer ");
+ if ( discovery->data.hints[0] & HINT_PRINTER)
+ seq_puts(seq, "Printer ");
+ if ( discovery->data.hints[0] & HINT_MODEM)
+ seq_puts(seq, "Modem ");
+ if ( discovery->data.hints[0] & HINT_FAX)
+ seq_puts(seq, "Fax ");
+ if ( discovery->data.hints[0] & HINT_LAN)
+ seq_puts(seq, "LAN Access ");
+
+ if ( discovery->data.hints[1] & HINT_TELEPHONY)
+ seq_puts(seq, "Telephony ");
+ if ( discovery->data.hints[1] & HINT_FILE_SERVER)
+ seq_puts(seq, "File Server ");
+ if ( discovery->data.hints[1] & HINT_COMM)
+ seq_puts(seq, "IrCOMM ");
+ if ( discovery->data.hints[1] & HINT_OBEX)
+ seq_puts(seq, "IrOBEX ");
+#endif
+ seq_printf(seq,", saddr: 0x%08x, daddr: 0x%08x\n\n",
+ discovery->data.saddr,
+ discovery->data.daddr);
+
+ seq_putc(seq, '\n');
+ }
+ return 0;
+}
+
+static const struct seq_operations discovery_seq_ops = {
+ .start = discovery_seq_start,
+ .next = discovery_seq_next,
+ .stop = discovery_seq_stop,
+ .show = discovery_seq_show,
+};
+
+static int discovery_seq_open(struct inode *inode, struct file *file)
+{
+ IRDA_ASSERT(irlmp != NULL, return -EINVAL;);
+
+ return seq_open(file, &discovery_seq_ops);
+}
+
+const struct file_operations discovery_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = discovery_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#endif
diff --git a/net/irda/ircomm/Kconfig b/net/irda/ircomm/Kconfig
new file mode 100644
index 000000000..19492c170
--- /dev/null
+++ b/net/irda/ircomm/Kconfig
@@ -0,0 +1,12 @@
+config IRCOMM
+ tristate "IrCOMM protocol"
+ depends on IRDA && TTY
+ help
+ Say Y here if you want to build support for the IrCOMM protocol.
+ To compile it as modules, choose M here: the modules will be
+ called ircomm and ircomm_tty.
+ IrCOMM implements serial port emulation, and makes it possible to
+ use all existing applications that understands TTY's with an
+ infrared link. Thus you should be able to use application like PPP,
+ minicom and others.
+
diff --git a/net/irda/ircomm/Makefile b/net/irda/ircomm/Makefile
new file mode 100644
index 000000000..ab23b5ba7
--- /dev/null
+++ b/net/irda/ircomm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Linux IrDA IrCOMM protocol layer.
+#
+
+obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
+
+ircomm-y := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
+ircomm-tty-y := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o
diff --git a/net/irda/ircomm/ircomm_core.c b/net/irda/ircomm/ircomm_core.c
new file mode 100644
index 000000000..3af219545
--- /dev/null
+++ b/net/irda/ircomm/ircomm_core.c
@@ -0,0 +1,563 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_core.c
+ * Version: 1.0
+ * Description: IrCOMM service interface
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Jun 6 20:37:34 1999
+ * Modified at: Tue Dec 21 13:26:41 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_lmp.h>
+#include <net/irda/ircomm_ttp.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_core.h>
+
+static int __ircomm_close(struct ircomm_cb *self);
+static void ircomm_control_indication(struct ircomm_cb *self,
+ struct sk_buff *skb, int clen);
+
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_irda;
+static int ircomm_seq_open(struct inode *, struct file *);
+
+static const struct file_operations ircomm_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ircomm_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#endif /* CONFIG_PROC_FS */
+
+hashbin_t *ircomm = NULL;
+
+static int __init ircomm_init(void)
+{
+ ircomm = hashbin_new(HB_LOCK);
+ if (ircomm == NULL) {
+ net_err_ratelimited("%s(), can't allocate hashbin!\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+#ifdef CONFIG_PROC_FS
+ { struct proc_dir_entry *ent;
+ ent = proc_create("ircomm", 0, proc_irda, &ircomm_proc_fops);
+ if (!ent) {
+ printk(KERN_ERR "ircomm_init: can't create /proc entry!\n");
+ return -ENODEV;
+ }
+ }
+#endif /* CONFIG_PROC_FS */
+
+ net_info_ratelimited("IrCOMM protocol (Dag Brattli)\n");
+
+ return 0;
+}
+
+static void __exit ircomm_cleanup(void)
+{
+ hashbin_delete(ircomm, (FREE_FUNC) __ircomm_close);
+
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("ircomm", proc_irda);
+#endif /* CONFIG_PROC_FS */
+}
+
+/*
+ * Function ircomm_open (client_notify)
+ *
+ * Start a new IrCOMM instance
+ *
+ */
+struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line)
+{
+ struct ircomm_cb *self = NULL;
+ int ret;
+
+ pr_debug("%s(), service_type=0x%02x\n", __func__ ,
+ service_type);
+
+ IRDA_ASSERT(ircomm != NULL, return NULL;);
+
+ self = kzalloc(sizeof(struct ircomm_cb), GFP_KERNEL);
+ if (self == NULL)
+ return NULL;
+
+ self->notify = *notify;
+ self->magic = IRCOMM_MAGIC;
+
+ /* Check if we should use IrLMP or IrTTP */
+ if (service_type & IRCOMM_3_WIRE_RAW) {
+ self->flow_status = FLOW_START;
+ ret = ircomm_open_lsap(self);
+ } else
+ ret = ircomm_open_tsap(self);
+
+ if (ret < 0) {
+ kfree(self);
+ return NULL;
+ }
+
+ self->service_type = service_type;
+ self->line = line;
+
+ hashbin_insert(ircomm, (irda_queue_t *) self, line, NULL);
+
+ ircomm_next_state(self, IRCOMM_IDLE);
+
+ return self;
+}
+
+EXPORT_SYMBOL(ircomm_open);
+
+/*
+ * Function ircomm_close_instance (self)
+ *
+ * Remove IrCOMM instance
+ *
+ */
+static int __ircomm_close(struct ircomm_cb *self)
+{
+ /* Disconnect link if any */
+ ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, NULL, NULL);
+
+ /* Remove TSAP */
+ if (self->tsap) {
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+
+ /* Remove LSAP */
+ if (self->lsap) {
+ irlmp_close_lsap(self->lsap);
+ self->lsap = NULL;
+ }
+ self->magic = 0;
+
+ kfree(self);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_close (self)
+ *
+ * Closes and removes the specified IrCOMM instance
+ *
+ */
+int ircomm_close(struct ircomm_cb *self)
+{
+ struct ircomm_cb *entry;
+
+ IRDA_ASSERT(self != NULL, return -EIO;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EIO;);
+
+ entry = hashbin_remove(ircomm, self->line, NULL);
+
+ IRDA_ASSERT(entry == self, return -1;);
+
+ return __ircomm_close(self);
+}
+
+EXPORT_SYMBOL(ircomm_close);
+
+/*
+ * Function ircomm_connect_request (self, service_type)
+ *
+ * Impl. of this function is differ from one of the reference. This
+ * function does discovery as well as sending connect request
+ *
+ */
+int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel,
+ __u32 saddr, __u32 daddr, struct sk_buff *skb,
+ __u8 service_type)
+{
+ struct ircomm_info info;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+ self->service_type= service_type;
+
+ info.dlsap_sel = dlsap_sel;
+ info.saddr = saddr;
+ info.daddr = daddr;
+
+ ret = ircomm_do_event(self, IRCOMM_CONNECT_REQUEST, skb, &info);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(ircomm_connect_request);
+
+/*
+ * Function ircomm_connect_indication (self, qos, skb)
+ *
+ * Notify user layer about the incoming connection
+ *
+ */
+void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+ struct ircomm_info *info)
+{
+ /*
+ * If there are any data hiding in the control channel, we must
+ * deliver it first. The side effect is that the control channel
+ * will be removed from the skb
+ */
+ if (self->notify.connect_indication)
+ self->notify.connect_indication(self->notify.instance, self,
+ info->qos, info->max_data_size,
+ info->max_header_size, skb);
+ else {
+ pr_debug("%s(), missing handler\n", __func__);
+ }
+}
+
+/*
+ * Function ircomm_connect_response (self, userdata, max_sdu_size)
+ *
+ * User accepts connection
+ *
+ */
+int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+ ret = ircomm_do_event(self, IRCOMM_CONNECT_RESPONSE, userdata, NULL);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(ircomm_connect_response);
+
+/*
+ * Function connect_confirm (self, skb)
+ *
+ * Notify user layer that the link is now connected
+ *
+ */
+void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb,
+ struct ircomm_info *info)
+{
+ if (self->notify.connect_confirm )
+ self->notify.connect_confirm(self->notify.instance,
+ self, info->qos,
+ info->max_data_size,
+ info->max_header_size, skb);
+ else {
+ pr_debug("%s(), missing handler\n", __func__);
+ }
+}
+
+/*
+ * Function ircomm_data_request (self, userdata)
+ *
+ * Send IrCOMM data to peer device
+ *
+ */
+int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -EFAULT;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;);
+ IRDA_ASSERT(skb != NULL, return -EFAULT;);
+
+ ret = ircomm_do_event(self, IRCOMM_DATA_REQUEST, skb, NULL);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(ircomm_data_request);
+
+/*
+ * Function ircomm_data_indication (self, skb)
+ *
+ * Data arrived, so deliver it to user
+ *
+ */
+void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(skb->len > 0, return;);
+
+ if (self->notify.data_indication)
+ self->notify.data_indication(self->notify.instance, self, skb);
+ else {
+ pr_debug("%s(), missing handler\n", __func__);
+ }
+}
+
+/*
+ * Function ircomm_process_data (self, skb)
+ *
+ * Data arrived which may contain control channel data
+ *
+ */
+void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb)
+{
+ int clen;
+
+ IRDA_ASSERT(skb->len > 0, return;);
+
+ clen = skb->data[0];
+
+ /*
+ * Input validation check: a stir4200/mcp2150 combinations sometimes
+ * results in frames with clen > remaining packet size. These are
+ * illegal; if we throw away just this frame then it seems to carry on
+ * fine
+ */
+ if (unlikely(skb->len < (clen + 1))) {
+ pr_debug("%s() throwing away illegal frame\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * If there are any data hiding in the control channel, we must
+ * deliver it first. The side effect is that the control channel
+ * will be removed from the skb
+ */
+ if (clen > 0)
+ ircomm_control_indication(self, skb, clen);
+
+ /* Remove control channel from data channel */
+ skb_pull(skb, clen+1);
+
+ if (skb->len)
+ ircomm_data_indication(self, skb);
+ else {
+ pr_debug("%s(), data was control info only!\n",
+ __func__);
+ }
+}
+
+/*
+ * Function ircomm_control_request (self, params)
+ *
+ * Send control data to peer device
+ *
+ */
+int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -EFAULT;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;);
+ IRDA_ASSERT(skb != NULL, return -EFAULT;);
+
+ ret = ircomm_do_event(self, IRCOMM_CONTROL_REQUEST, skb, NULL);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(ircomm_control_request);
+
+/*
+ * Function ircomm_control_indication (self, skb)
+ *
+ * Data has arrived on the control channel
+ *
+ */
+static void ircomm_control_indication(struct ircomm_cb *self,
+ struct sk_buff *skb, int clen)
+{
+ /* Use udata for delivering data on the control channel */
+ if (self->notify.udata_indication) {
+ struct sk_buff *ctrl_skb;
+
+ /* We don't own the skb, so clone it */
+ ctrl_skb = skb_clone(skb, GFP_ATOMIC);
+ if (!ctrl_skb)
+ return;
+
+ /* Remove data channel from control channel */
+ skb_trim(ctrl_skb, clen+1);
+
+ self->notify.udata_indication(self->notify.instance, self,
+ ctrl_skb);
+
+ /* Drop reference count -
+ * see ircomm_tty_control_indication(). */
+ dev_kfree_skb(ctrl_skb);
+ } else {
+ pr_debug("%s(), missing handler\n", __func__);
+ }
+}
+
+/*
+ * Function ircomm_disconnect_request (self, userdata, priority)
+ *
+ * User layer wants to disconnect the IrCOMM connection
+ *
+ */
+int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata)
+{
+ struct ircomm_info info;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+ ret = ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, userdata,
+ &info);
+ return ret;
+}
+
+EXPORT_SYMBOL(ircomm_disconnect_request);
+
+/*
+ * Function disconnect_indication (self, skb)
+ *
+ * Tell user that the link has been disconnected
+ *
+ */
+void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+ struct ircomm_info *info)
+{
+ IRDA_ASSERT(info != NULL, return;);
+
+ if (self->notify.disconnect_indication) {
+ self->notify.disconnect_indication(self->notify.instance, self,
+ info->reason, skb);
+ } else {
+ pr_debug("%s(), missing handler\n", __func__);
+ }
+}
+
+/*
+ * Function ircomm_flow_request (self, flow)
+ *
+ *
+ *
+ */
+void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+ if (self->service_type == IRCOMM_3_WIRE_RAW)
+ return;
+
+ irttp_flow_request(self->tsap, flow);
+}
+
+EXPORT_SYMBOL(ircomm_flow_request);
+
+#ifdef CONFIG_PROC_FS
+static void *ircomm_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct ircomm_cb *self;
+ loff_t off = 0;
+
+ spin_lock_irq(&ircomm->hb_spinlock);
+
+ for (self = (struct ircomm_cb *) hashbin_get_first(ircomm);
+ self != NULL;
+ self = (struct ircomm_cb *) hashbin_get_next(ircomm)) {
+ if (off++ == *pos)
+ break;
+
+ }
+ return self;
+}
+
+static void *ircomm_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+
+ return (void *) hashbin_get_next(ircomm);
+}
+
+static void ircomm_seq_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_irq(&ircomm->hb_spinlock);
+}
+
+static int ircomm_seq_show(struct seq_file *seq, void *v)
+{
+ const struct ircomm_cb *self = v;
+
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EINVAL; );
+
+ if(self->line < 0x10)
+ seq_printf(seq, "ircomm%d", self->line);
+ else
+ seq_printf(seq, "irlpt%d", self->line - 0x10);
+
+ seq_printf(seq,
+ " state: %s, slsap_sel: %#02x, dlsap_sel: %#02x, mode:",
+ ircomm_state[ self->state],
+ self->slsap_sel, self->dlsap_sel);
+
+ if(self->service_type & IRCOMM_3_WIRE_RAW)
+ seq_printf(seq, " 3-wire-raw");
+ if(self->service_type & IRCOMM_3_WIRE)
+ seq_printf(seq, " 3-wire");
+ if(self->service_type & IRCOMM_9_WIRE)
+ seq_printf(seq, " 9-wire");
+ if(self->service_type & IRCOMM_CENTRONICS)
+ seq_printf(seq, " Centronics");
+ seq_putc(seq, '\n');
+
+ return 0;
+}
+
+static const struct seq_operations ircomm_seq_ops = {
+ .start = ircomm_seq_start,
+ .next = ircomm_seq_next,
+ .stop = ircomm_seq_stop,
+ .show = ircomm_seq_show,
+};
+
+static int ircomm_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &ircomm_seq_ops);
+}
+#endif /* CONFIG_PROC_FS */
+
+MODULE_AUTHOR("Dag Brattli <dag@brattli.net>");
+MODULE_DESCRIPTION("IrCOMM protocol");
+MODULE_LICENSE("GPL");
+
+module_init(ircomm_init);
+module_exit(ircomm_cleanup);
diff --git a/net/irda/ircomm/ircomm_event.c b/net/irda/ircomm/ircomm_event.c
new file mode 100644
index 000000000..b0730ac9f
--- /dev/null
+++ b/net/irda/ircomm/ircomm_event.c
@@ -0,0 +1,246 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_event.c
+ * Version: 1.0
+ * Description: IrCOMM layer state machine
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Jun 6 20:33:11 1999
+ * Modified at: Sun Dec 12 13:44:32 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_event.h>
+
+static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info);
+
+const char *const ircomm_state[] = {
+ "IRCOMM_IDLE",
+ "IRCOMM_WAITI",
+ "IRCOMM_WAITR",
+ "IRCOMM_CONN",
+};
+
+static const char *const ircomm_event[] __maybe_unused = {
+ "IRCOMM_CONNECT_REQUEST",
+ "IRCOMM_CONNECT_RESPONSE",
+ "IRCOMM_TTP_CONNECT_INDICATION",
+ "IRCOMM_LMP_CONNECT_INDICATION",
+ "IRCOMM_TTP_CONNECT_CONFIRM",
+ "IRCOMM_LMP_CONNECT_CONFIRM",
+
+ "IRCOMM_LMP_DISCONNECT_INDICATION",
+ "IRCOMM_TTP_DISCONNECT_INDICATION",
+ "IRCOMM_DISCONNECT_REQUEST",
+
+ "IRCOMM_TTP_DATA_INDICATION",
+ "IRCOMM_LMP_DATA_INDICATION",
+ "IRCOMM_DATA_REQUEST",
+ "IRCOMM_CONTROL_REQUEST",
+ "IRCOMM_CONTROL_INDICATION",
+};
+
+static int (*state[])(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info) =
+{
+ ircomm_state_idle,
+ ircomm_state_waiti,
+ ircomm_state_waitr,
+ ircomm_state_conn,
+};
+
+/*
+ * Function ircomm_state_idle (self, event, skb)
+ *
+ * IrCOMM is currently idle
+ *
+ */
+static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case IRCOMM_CONNECT_REQUEST:
+ ircomm_next_state(self, IRCOMM_WAITI);
+ ret = self->issue.connect_request(self, skb, info);
+ break;
+ case IRCOMM_TTP_CONNECT_INDICATION:
+ case IRCOMM_LMP_CONNECT_INDICATION:
+ ircomm_next_state(self, IRCOMM_WAITR);
+ ircomm_connect_indication(self, skb, info);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_state_waiti (self, event, skb)
+ *
+ * The IrCOMM user has requested an IrCOMM connection to the remote
+ * device and is awaiting confirmation
+ */
+static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case IRCOMM_TTP_CONNECT_CONFIRM:
+ case IRCOMM_LMP_CONNECT_CONFIRM:
+ ircomm_next_state(self, IRCOMM_CONN);
+ ircomm_connect_confirm(self, skb, info);
+ break;
+ case IRCOMM_TTP_DISCONNECT_INDICATION:
+ case IRCOMM_LMP_DISCONNECT_INDICATION:
+ ircomm_next_state(self, IRCOMM_IDLE);
+ ircomm_disconnect_indication(self, skb, info);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_state_waitr (self, event, skb)
+ *
+ * IrCOMM has received an incoming connection request and is awaiting
+ * response from the user
+ */
+static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case IRCOMM_CONNECT_RESPONSE:
+ ircomm_next_state(self, IRCOMM_CONN);
+ ret = self->issue.connect_response(self, skb);
+ break;
+ case IRCOMM_DISCONNECT_REQUEST:
+ ircomm_next_state(self, IRCOMM_IDLE);
+ ret = self->issue.disconnect_request(self, skb, info);
+ break;
+ case IRCOMM_TTP_DISCONNECT_INDICATION:
+ case IRCOMM_LMP_DISCONNECT_INDICATION:
+ ircomm_next_state(self, IRCOMM_IDLE);
+ ircomm_disconnect_indication(self, skb, info);
+ break;
+ default:
+ pr_debug("%s(), unknown event = %s\n", __func__ ,
+ ircomm_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_state_conn (self, event, skb)
+ *
+ * IrCOMM is connected to the peer IrCOMM device
+ *
+ */
+static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case IRCOMM_DATA_REQUEST:
+ ret = self->issue.data_request(self, skb, 0);
+ break;
+ case IRCOMM_TTP_DATA_INDICATION:
+ ircomm_process_data(self, skb);
+ break;
+ case IRCOMM_LMP_DATA_INDICATION:
+ ircomm_data_indication(self, skb);
+ break;
+ case IRCOMM_CONTROL_REQUEST:
+ /* Just send a separate frame for now */
+ ret = self->issue.data_request(self, skb, skb->len);
+ break;
+ case IRCOMM_TTP_DISCONNECT_INDICATION:
+ case IRCOMM_LMP_DISCONNECT_INDICATION:
+ ircomm_next_state(self, IRCOMM_IDLE);
+ ircomm_disconnect_indication(self, skb, info);
+ break;
+ case IRCOMM_DISCONNECT_REQUEST:
+ ircomm_next_state(self, IRCOMM_IDLE);
+ ret = self->issue.disconnect_request(self, skb, info);
+ break;
+ default:
+ pr_debug("%s(), unknown event = %s\n", __func__ ,
+ ircomm_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_do_event (self, event, skb)
+ *
+ * Process event
+ *
+ */
+int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event,
+ struct sk_buff *skb, struct ircomm_info *info)
+{
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_state[self->state], ircomm_event[event]);
+
+ return (*state[self->state])(self, event, skb, info);
+}
+
+/*
+ * Function ircomm_next_state (self, state)
+ *
+ * Switch state
+ *
+ */
+void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state)
+{
+ self->state = state;
+
+ pr_debug("%s: next state=%s, service type=%d\n", __func__ ,
+ ircomm_state[self->state], self->service_type);
+}
diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c
new file mode 100644
index 000000000..e4cc847bb
--- /dev/null
+++ b/net/irda/ircomm/ircomm_lmp.c
@@ -0,0 +1,350 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_lmp.c
+ * Version: 1.0
+ * Description: Interface between IrCOMM and IrLMP
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Jun 6 20:48:27 1999
+ * Modified at: Sun Dec 12 13:44:17 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: Previous IrLPT work by Thomas Davis
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/gfp.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irda_device.h> /* struct irda_skb_cb */
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_lmp.h>
+
+
+/*
+ * Function ircomm_lmp_connect_request (self, userdata)
+ *
+ *
+ *
+ */
+static int ircomm_lmp_connect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info)
+{
+ int ret = 0;
+
+ /* Don't forget to refcount it - should be NULL anyway */
+ if(userdata)
+ skb_get(userdata);
+
+ ret = irlmp_connect_request(self->lsap, info->dlsap_sel,
+ info->saddr, info->daddr, NULL, userdata);
+ return ret;
+}
+
+/*
+ * Function ircomm_lmp_connect_response (self, skb)
+ *
+ *
+ *
+ */
+static int ircomm_lmp_connect_response(struct ircomm_cb *self,
+ struct sk_buff *userdata)
+{
+ struct sk_buff *tx_skb;
+
+ /* Any userdata supplied? */
+ if (userdata == NULL) {
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /* Reserve space for MUX and LAP header */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+ } else {
+ /*
+ * Check that the client has reserved enough space for
+ * headers
+ */
+ IRDA_ASSERT(skb_headroom(userdata) >= LMP_MAX_HEADER,
+ return -1;);
+
+ /* Don't forget to refcount it - should be NULL anyway */
+ skb_get(userdata);
+ tx_skb = userdata;
+ }
+
+ return irlmp_connect_response(self->lsap, tx_skb);
+}
+
+static int ircomm_lmp_disconnect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info)
+{
+ struct sk_buff *tx_skb;
+ int ret;
+
+ if (!userdata) {
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /* Reserve space for MUX and LAP header */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+ userdata = tx_skb;
+ } else {
+ /* Don't forget to refcount it - should be NULL anyway */
+ skb_get(userdata);
+ }
+
+ ret = irlmp_disconnect_request(self->lsap, userdata);
+
+ return ret;
+}
+
+/*
+ * Function ircomm_lmp_flow_control (skb)
+ *
+ * This function is called when a data frame we have sent to IrLAP has
+ * been deallocated. We do this to make sure we don't flood IrLAP with
+ * frames, since we are not using the IrTTP flow control mechanism
+ */
+static void ircomm_lmp_flow_control(struct sk_buff *skb)
+{
+ struct irda_skb_cb *cb;
+ struct ircomm_cb *self;
+ int line;
+
+ IRDA_ASSERT(skb != NULL, return;);
+
+ cb = (struct irda_skb_cb *) skb->cb;
+
+ line = cb->line;
+
+ self = (struct ircomm_cb *) hashbin_lock_find(ircomm, line, NULL);
+ if (!self) {
+ pr_debug("%s(), didn't find myself\n", __func__);
+ return;
+ }
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+ self->pkt_count--;
+
+ if ((self->pkt_count < 2) && (self->flow_status == FLOW_STOP)) {
+ pr_debug("%s(), asking TTY to start again!\n", __func__);
+ self->flow_status = FLOW_START;
+ if (self->notify.flow_indication)
+ self->notify.flow_indication(self->notify.instance,
+ self, FLOW_START);
+ }
+}
+
+/*
+ * Function ircomm_lmp_data_request (self, userdata)
+ *
+ * Send data frame to peer device
+ *
+ */
+static int ircomm_lmp_data_request(struct ircomm_cb *self,
+ struct sk_buff *skb,
+ int not_used)
+{
+ struct irda_skb_cb *cb;
+ int ret;
+
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ cb = (struct irda_skb_cb *) skb->cb;
+
+ cb->line = self->line;
+
+ pr_debug("%s(), sending frame\n", __func__);
+
+ /* Don't forget to refcount it - see ircomm_tty_do_softint() */
+ skb_get(skb);
+
+ skb_orphan(skb);
+ skb->destructor = ircomm_lmp_flow_control;
+
+ if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) {
+ pr_debug("%s(), asking TTY to slow down!\n", __func__);
+ self->flow_status = FLOW_STOP;
+ if (self->notify.flow_indication)
+ self->notify.flow_indication(self->notify.instance,
+ self, FLOW_STOP);
+ }
+ ret = irlmp_data_request(self->lsap, skb);
+ if (ret) {
+ net_err_ratelimited("%s(), failed\n", __func__);
+ /* irlmp_data_request already free the packet */
+ }
+
+ return ret;
+}
+
+/*
+ * Function ircomm_lmp_data_indication (instance, sap, skb)
+ *
+ * Incoming data which we must deliver to the state machine, to check
+ * we are still connected.
+ */
+static int ircomm_lmp_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ ircomm_do_event(self, IRCOMM_LMP_DATA_INDICATION, skb, NULL);
+
+ /* Drop reference count - see ircomm_tty_data_indication(). */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_lmp_connect_confirm (instance, sap, qos, max_sdu_size,
+ * max_header_size, skb)
+ *
+ * Connection has been confirmed by peer device
+ *
+ */
+static void ircomm_lmp_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_seg_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(qos != NULL, return;);
+
+ info.max_data_size = max_seg_size;
+ info.max_header_size = max_header_size;
+ info.qos = qos;
+
+ ircomm_do_event(self, IRCOMM_LMP_CONNECT_CONFIRM, skb, &info);
+
+ /* Drop reference count - see ircomm_tty_connect_confirm(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_lmp_connect_indication (instance, sap, qos, max_sdu_size,
+ * max_header_size, skb)
+ *
+ * Peer device wants to make a connection with us
+ *
+ */
+static void ircomm_lmp_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_seg_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *)instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(qos != NULL, return;);
+
+ info.max_data_size = max_seg_size;
+ info.max_header_size = max_header_size;
+ info.qos = qos;
+
+ ircomm_do_event(self, IRCOMM_LMP_CONNECT_INDICATION, skb, &info);
+
+ /* Drop reference count - see ircomm_tty_connect_indication(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_lmp_disconnect_indication (instance, sap, reason, skb)
+ *
+ * Peer device has closed the connection, or the link went down for some
+ * other reason
+ */
+static void ircomm_lmp_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+ info.reason = reason;
+
+ ircomm_do_event(self, IRCOMM_LMP_DISCONNECT_INDICATION, skb, &info);
+
+ /* Drop reference count - see ircomm_tty_disconnect_indication(). */
+ if(skb)
+ dev_kfree_skb(skb);
+}
+/*
+ * Function ircomm_open_lsap (self)
+ *
+ * Open LSAP. This function will only be used when using "raw" services
+ *
+ */
+int ircomm_open_lsap(struct ircomm_cb *self)
+{
+ notify_t notify;
+
+ /* Register callbacks */
+ irda_notify_init(&notify);
+ notify.data_indication = ircomm_lmp_data_indication;
+ notify.connect_confirm = ircomm_lmp_connect_confirm;
+ notify.connect_indication = ircomm_lmp_connect_indication;
+ notify.disconnect_indication = ircomm_lmp_disconnect_indication;
+ notify.instance = self;
+ strlcpy(notify.name, "IrCOMM", sizeof(notify.name));
+
+ self->lsap = irlmp_open_lsap(LSAP_ANY, &notify, 0);
+ if (!self->lsap) {
+ pr_debug("%sfailed to allocate tsap\n", __func__);
+ return -1;
+ }
+ self->slsap_sel = self->lsap->slsap_sel;
+
+ /*
+ * Initialize the call-table for issuing commands
+ */
+ self->issue.data_request = ircomm_lmp_data_request;
+ self->issue.connect_request = ircomm_lmp_connect_request;
+ self->issue.connect_response = ircomm_lmp_connect_response;
+ self->issue.disconnect_request = ircomm_lmp_disconnect_request;
+
+ return 0;
+}
diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c
new file mode 100644
index 000000000..3c4caa60c
--- /dev/null
+++ b/net/irda/ircomm/ircomm_param.c
@@ -0,0 +1,502 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_param.c
+ * Version: 1.0
+ * Description: Parameter handling for the IrCOMM protocol
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Jun 7 10:25:11 1999
+ * Modified at: Sun Jan 30 14:32:03 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/gfp.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+#include <net/irda/ircomm_param.h>
+
+static int ircomm_param_service_type(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_port_type(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_port_name(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_service_type(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_data_rate(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_data_format(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_flow_control(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get);
+static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get);
+static int ircomm_param_line_status(void *instance, irda_param_t *param,
+ int get);
+static int ircomm_param_dte(void *instance, irda_param_t *param, int get);
+static int ircomm_param_dce(void *instance, irda_param_t *param, int get);
+static int ircomm_param_poll(void *instance, irda_param_t *param, int get);
+
+static const pi_minor_info_t pi_minor_call_table_common[] = {
+ { ircomm_param_service_type, PV_INT_8_BITS },
+ { ircomm_param_port_type, PV_INT_8_BITS },
+ { ircomm_param_port_name, PV_STRING }
+};
+static const pi_minor_info_t pi_minor_call_table_non_raw[] = {
+ { ircomm_param_data_rate, PV_INT_32_BITS | PV_BIG_ENDIAN },
+ { ircomm_param_data_format, PV_INT_8_BITS },
+ { ircomm_param_flow_control, PV_INT_8_BITS },
+ { ircomm_param_xon_xoff, PV_INT_16_BITS },
+ { ircomm_param_enq_ack, PV_INT_16_BITS },
+ { ircomm_param_line_status, PV_INT_8_BITS }
+};
+static const pi_minor_info_t pi_minor_call_table_9_wire[] = {
+ { ircomm_param_dte, PV_INT_8_BITS },
+ { ircomm_param_dce, PV_INT_8_BITS },
+ { ircomm_param_poll, PV_NO_VALUE },
+};
+
+static const pi_major_info_t pi_major_call_table[] = {
+ { pi_minor_call_table_common, 3 },
+ { pi_minor_call_table_non_raw, 6 },
+ { pi_minor_call_table_9_wire, 3 }
+/* { pi_minor_call_table_centronics } */
+};
+
+pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 };
+
+/*
+ * Function ircomm_param_request (self, pi, flush)
+ *
+ * Queue a parameter for the control channel
+ *
+ */
+int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
+{
+ unsigned long flags;
+ struct sk_buff *skb;
+ int count;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ /* Make sure we don't send parameters for raw mode */
+ if (self->service_type == IRCOMM_3_WIRE_RAW)
+ return 0;
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ skb = self->ctrl_skb;
+ if (!skb) {
+ skb = alloc_skb(256, GFP_ATOMIC);
+ if (!skb) {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -ENOMEM;
+ }
+
+ skb_reserve(skb, self->max_header_size);
+ self->ctrl_skb = skb;
+ }
+ /*
+ * Inserting is a little bit tricky since we don't know how much
+ * room we will need. But this should hopefully work OK
+ */
+ count = irda_param_insert(self, pi, skb_tail_pointer(skb),
+ skb_tailroom(skb), &ircomm_param_info);
+ if (count < 0) {
+ net_warn_ratelimited("%s(), no room for parameter!\n",
+ __func__);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -1;
+ }
+ skb_put(skb, count);
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ pr_debug("%s(), skb->len=%d\n", __func__ , skb->len);
+
+ if (flush) {
+ /* ircomm_tty_do_softint will take care of the rest */
+ schedule_work(&self->tqueue);
+ }
+
+ return count;
+}
+
+/*
+ * Function ircomm_param_service_type (self, buf, len)
+ *
+ * Handle service type, this function will both be called after the LM-IAS
+ * query and then the remote device sends its initial parameters
+ *
+ */
+static int ircomm_param_service_type(void *instance, irda_param_t *param,
+ int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ __u8 service_type = (__u8) param->pv.i;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get) {
+ param->pv.i = self->settings.service_type;
+ return 0;
+ }
+
+ /* Find all common service types */
+ service_type &= self->service_type;
+ if (!service_type) {
+ pr_debug("%s(), No common service type to use!\n", __func__);
+ return -1;
+ }
+ pr_debug("%s(), services in common=%02x\n", __func__ ,
+ service_type);
+
+ /*
+ * Now choose a preferred service type of those available
+ */
+ if (service_type & IRCOMM_CENTRONICS)
+ self->settings.service_type = IRCOMM_CENTRONICS;
+ else if (service_type & IRCOMM_9_WIRE)
+ self->settings.service_type = IRCOMM_9_WIRE;
+ else if (service_type & IRCOMM_3_WIRE)
+ self->settings.service_type = IRCOMM_3_WIRE;
+ else if (service_type & IRCOMM_3_WIRE_RAW)
+ self->settings.service_type = IRCOMM_3_WIRE_RAW;
+
+ pr_debug("%s(), resulting service type=0x%02x\n", __func__ ,
+ self->settings.service_type);
+
+ /*
+ * Now the line is ready for some communication. Check if we are a
+ * server, and send over some initial parameters.
+ * Client do it in ircomm_tty_state_setup().
+ * Note : we may get called from ircomm_tty_getvalue_confirm(),
+ * therefore before we even have open any socket. And self->client
+ * is initialised to TRUE only later. So, we check if the link is
+ * really initialised. - Jean II
+ */
+ if ((self->max_header_size != IRCOMM_TTY_HDR_UNINITIALISED) &&
+ (!self->client) &&
+ (self->settings.service_type != IRCOMM_3_WIRE_RAW))
+ {
+ /* Init connection */
+ ircomm_tty_send_initial_parameters(self);
+ ircomm_tty_link_established(self);
+ }
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_port_type (self, param)
+ *
+ * The port type parameter tells if the devices are serial or parallel.
+ * Since we only advertise serial service, this parameter should only
+ * be equal to IRCOMM_SERIAL.
+ */
+static int ircomm_param_port_type(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = IRCOMM_SERIAL;
+ else {
+ self->settings.port_type = (__u8) param->pv.i;
+
+ pr_debug("%s(), port type=%d\n", __func__ ,
+ self->settings.port_type);
+ }
+ return 0;
+}
+
+/*
+ * Function ircomm_param_port_name (self, param)
+ *
+ * Exchange port name
+ *
+ */
+static int ircomm_param_port_name(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get) {
+ pr_debug("%s(), not imp!\n", __func__);
+ } else {
+ pr_debug("%s(), port-name=%s\n", __func__ , param->pv.c);
+ strncpy(self->settings.port_name, param->pv.c, 32);
+ }
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_data_rate (self, param)
+ *
+ * Exchange data rate to be used in this settings
+ *
+ */
+static int ircomm_param_data_rate(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->settings.data_rate;
+ else
+ self->settings.data_rate = param->pv.i;
+
+ pr_debug("%s(), data rate = %d\n", __func__ , param->pv.i);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_data_format (self, param)
+ *
+ * Exchange data format to be used in this settings
+ *
+ */
+static int ircomm_param_data_format(void *instance, irda_param_t *param,
+ int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->settings.data_format;
+ else
+ self->settings.data_format = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_flow_control (self, param)
+ *
+ * Exchange flow control settings to be used in this settings
+ *
+ */
+static int ircomm_param_flow_control(void *instance, irda_param_t *param,
+ int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->settings.flow_control;
+ else
+ self->settings.flow_control = (__u8) param->pv.i;
+
+ pr_debug("%s(), flow control = 0x%02x\n", __func__ , (__u8)param->pv.i);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_xon_xoff (self, param)
+ *
+ * Exchange XON/XOFF characters
+ *
+ */
+static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get) {
+ param->pv.i = self->settings.xonxoff[0];
+ param->pv.i |= self->settings.xonxoff[1] << 8;
+ } else {
+ self->settings.xonxoff[0] = (__u16) param->pv.i & 0xff;
+ self->settings.xonxoff[1] = (__u16) param->pv.i >> 8;
+ }
+
+ pr_debug("%s(), XON/XOFF = 0x%02x,0x%02x\n", __func__ ,
+ param->pv.i & 0xff, param->pv.i >> 8);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_enq_ack (self, param)
+ *
+ * Exchange ENQ/ACK characters
+ *
+ */
+static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get) {
+ param->pv.i = self->settings.enqack[0];
+ param->pv.i |= self->settings.enqack[1] << 8;
+ } else {
+ self->settings.enqack[0] = (__u16) param->pv.i & 0xff;
+ self->settings.enqack[1] = (__u16) param->pv.i >> 8;
+ }
+
+ pr_debug("%s(), ENQ/ACK = 0x%02x,0x%02x\n", __func__ ,
+ param->pv.i & 0xff, param->pv.i >> 8);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_line_status (self, param)
+ *
+ *
+ *
+ */
+static int ircomm_param_line_status(void *instance, irda_param_t *param,
+ int get)
+{
+ pr_debug("%s(), not impl.\n", __func__);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_dte (instance, param)
+ *
+ * If we get here, there must be some sort of null-modem connection, and
+ * we are probably working in server mode as well.
+ */
+static int ircomm_param_dte(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ __u8 dte;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->settings.dte;
+ else {
+ dte = (__u8) param->pv.i;
+
+ self->settings.dce = 0;
+
+ if (dte & IRCOMM_DELTA_DTR)
+ self->settings.dce |= (IRCOMM_DELTA_DSR|
+ IRCOMM_DELTA_RI |
+ IRCOMM_DELTA_CD);
+ if (dte & IRCOMM_DTR)
+ self->settings.dce |= (IRCOMM_DSR|
+ IRCOMM_RI |
+ IRCOMM_CD);
+
+ if (dte & IRCOMM_DELTA_RTS)
+ self->settings.dce |= IRCOMM_DELTA_CTS;
+ if (dte & IRCOMM_RTS)
+ self->settings.dce |= IRCOMM_CTS;
+
+ /* Take appropriate actions */
+ ircomm_tty_check_modem_status(self);
+
+ /* Null modem cable emulator */
+ self->settings.null_modem = TRUE;
+ }
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_dce (instance, param)
+ *
+ *
+ *
+ */
+static int ircomm_param_dce(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ __u8 dce;
+
+ pr_debug("%s(), dce = 0x%02x\n", __func__ , (__u8)param->pv.i);
+
+ dce = (__u8) param->pv.i;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ self->settings.dce = dce;
+
+ /* Check if any of the settings have changed */
+ if (dce & 0x0f) {
+ if (dce & IRCOMM_DELTA_CTS) {
+ pr_debug("%s(), CTS\n", __func__);
+ }
+ }
+
+ ircomm_tty_check_modem_status(self);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_param_poll (instance, param)
+ *
+ * Called when the peer device is polling for the line settings
+ *
+ */
+static int ircomm_param_poll(void *instance, irda_param_t *param, int get)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ /* Poll parameters are always of length 0 (just a signal) */
+ if (!get) {
+ /* Respond with DTE line settings */
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+ }
+ return 0;
+}
+
+
+
+
+
diff --git a/net/irda/ircomm/ircomm_ttp.c b/net/irda/ircomm/ircomm_ttp.c
new file mode 100644
index 000000000..4b81e0934
--- /dev/null
+++ b/net/irda/ircomm/ircomm_ttp.c
@@ -0,0 +1,350 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_ttp.c
+ * Version: 1.0
+ * Description: Interface between IrCOMM and IrTTP
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Jun 6 20:48:27 1999
+ * Modified at: Mon Dec 13 11:35:13 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_ttp.h>
+
+static int ircomm_ttp_data_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static void ircomm_ttp_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb);
+static void ircomm_ttp_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb);
+static void ircomm_ttp_flow_indication(void *instance, void *sap,
+ LOCAL_FLOW cmd);
+static void ircomm_ttp_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *skb);
+static int ircomm_ttp_data_request(struct ircomm_cb *self,
+ struct sk_buff *skb,
+ int clen);
+static int ircomm_ttp_connect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info);
+static int ircomm_ttp_connect_response(struct ircomm_cb *self,
+ struct sk_buff *userdata);
+static int ircomm_ttp_disconnect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info);
+
+/*
+ * Function ircomm_open_tsap (self)
+ *
+ *
+ *
+ */
+int ircomm_open_tsap(struct ircomm_cb *self)
+{
+ notify_t notify;
+
+ /* Register callbacks */
+ irda_notify_init(&notify);
+ notify.data_indication = ircomm_ttp_data_indication;
+ notify.connect_confirm = ircomm_ttp_connect_confirm;
+ notify.connect_indication = ircomm_ttp_connect_indication;
+ notify.flow_indication = ircomm_ttp_flow_indication;
+ notify.disconnect_indication = ircomm_ttp_disconnect_indication;
+ notify.instance = self;
+ strlcpy(notify.name, "IrCOMM", sizeof(notify.name));
+
+ self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT,
+ &notify);
+ if (!self->tsap) {
+ pr_debug("%sfailed to allocate tsap\n", __func__);
+ return -1;
+ }
+ self->slsap_sel = self->tsap->stsap_sel;
+
+ /*
+ * Initialize the call-table for issuing commands
+ */
+ self->issue.data_request = ircomm_ttp_data_request;
+ self->issue.connect_request = ircomm_ttp_connect_request;
+ self->issue.connect_response = ircomm_ttp_connect_response;
+ self->issue.disconnect_request = ircomm_ttp_disconnect_request;
+
+ return 0;
+}
+
+/*
+ * Function ircomm_ttp_connect_request (self, userdata)
+ *
+ *
+ *
+ */
+static int ircomm_ttp_connect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info)
+{
+ int ret = 0;
+
+ /* Don't forget to refcount it - should be NULL anyway */
+ if(userdata)
+ skb_get(userdata);
+
+ ret = irttp_connect_request(self->tsap, info->dlsap_sel,
+ info->saddr, info->daddr, NULL,
+ TTP_SAR_DISABLE, userdata);
+
+ return ret;
+}
+
+/*
+ * Function ircomm_ttp_connect_response (self, skb)
+ *
+ *
+ *
+ */
+static int ircomm_ttp_connect_response(struct ircomm_cb *self,
+ struct sk_buff *userdata)
+{
+ int ret;
+
+ /* Don't forget to refcount it - should be NULL anyway */
+ if(userdata)
+ skb_get(userdata);
+
+ ret = irttp_connect_response(self->tsap, TTP_SAR_DISABLE, userdata);
+
+ return ret;
+}
+
+/*
+ * Function ircomm_ttp_data_request (self, userdata)
+ *
+ * Send IrCOMM data to IrTTP layer. Currently we do not try to combine
+ * control data with pure data, so they will be sent as separate frames.
+ * Should not be a big problem though, since control frames are rare. But
+ * some of them are sent after connection establishment, so this can
+ * increase the latency a bit.
+ */
+static int ircomm_ttp_data_request(struct ircomm_cb *self,
+ struct sk_buff *skb,
+ int clen)
+{
+ int ret;
+
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ pr_debug("%s(), clen=%d\n", __func__ , clen);
+
+ /*
+ * Insert clen field, currently we either send data only, or control
+ * only frames, to make things easier and avoid queueing
+ */
+ IRDA_ASSERT(skb_headroom(skb) >= IRCOMM_HEADER_SIZE, return -1;);
+
+ /* Don't forget to refcount it - see ircomm_tty_do_softint() */
+ skb_get(skb);
+
+ skb_push(skb, IRCOMM_HEADER_SIZE);
+
+ skb->data[0] = clen;
+
+ ret = irttp_data_request(self->tsap, skb);
+ if (ret) {
+ net_err_ratelimited("%s(), failed\n", __func__);
+ /* irttp_data_request already free the packet */
+ }
+
+ return ret;
+}
+
+/*
+ * Function ircomm_ttp_data_indication (instance, sap, skb)
+ *
+ * Incoming data
+ *
+ */
+static int ircomm_ttp_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ ircomm_do_event(self, IRCOMM_TTP_DATA_INDICATION, skb, NULL);
+
+ /* Drop reference count - see ircomm_tty_data_indication(). */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static void ircomm_ttp_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(qos != NULL, goto out;);
+
+ if (max_sdu_size != TTP_SAR_DISABLE) {
+ net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n",
+ __func__);
+ goto out;
+ }
+
+ info.max_data_size = irttp_get_max_seg_size(self->tsap)
+ - IRCOMM_HEADER_SIZE;
+ info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE;
+ info.qos = qos;
+
+ ircomm_do_event(self, IRCOMM_TTP_CONNECT_CONFIRM, skb, &info);
+
+out:
+ /* Drop reference count - see ircomm_tty_connect_confirm(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_connect_indication (instance, sap, qos, max_sdu_size,
+ * max_header_size, skb)
+ *
+ *
+ *
+ */
+static void ircomm_ttp_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *)instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(qos != NULL, goto out;);
+
+ if (max_sdu_size != TTP_SAR_DISABLE) {
+ net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n",
+ __func__);
+ goto out;
+ }
+
+ info.max_data_size = irttp_get_max_seg_size(self->tsap)
+ - IRCOMM_HEADER_SIZE;
+ info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE;
+ info.qos = qos;
+
+ ircomm_do_event(self, IRCOMM_TTP_CONNECT_INDICATION, skb, &info);
+
+out:
+ /* Drop reference count - see ircomm_tty_connect_indication(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_disconnect_request (self, userdata, info)
+ *
+ *
+ *
+ */
+static int ircomm_ttp_disconnect_request(struct ircomm_cb *self,
+ struct sk_buff *userdata,
+ struct ircomm_info *info)
+{
+ int ret;
+
+ /* Don't forget to refcount it - should be NULL anyway */
+ if(userdata)
+ skb_get(userdata);
+
+ ret = irttp_disconnect_request(self->tsap, userdata, P_NORMAL);
+
+ return ret;
+}
+
+/*
+ * Function ircomm_ttp_disconnect_indication (instance, sap, reason, skb)
+ *
+ *
+ *
+ */
+static void ircomm_ttp_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *skb)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+ struct ircomm_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+ info.reason = reason;
+
+ ircomm_do_event(self, IRCOMM_TTP_DISCONNECT_INDICATION, skb, &info);
+
+ /* Drop reference count - see ircomm_tty_disconnect_indication(). */
+ if(skb)
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_flow_indication (instance, sap, cmd)
+ *
+ * Layer below is telling us to start or stop the flow of data
+ *
+ */
+static void ircomm_ttp_flow_indication(void *instance, void *sap,
+ LOCAL_FLOW cmd)
+{
+ struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+ if (self->notify.flow_indication)
+ self->notify.flow_indication(self->notify.instance, self, cmd);
+}
+
+
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
new file mode 100644
index 000000000..683346d2d
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -0,0 +1,1362 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_tty.c
+ * Version: 1.0
+ * Description: IrCOMM serial TTY driver
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Jun 6 21:00:56 1999
+ * Modified at: Wed Feb 23 00:09:02 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: serial.c and previous IrCOMM work by Takahide Higuchi
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/interrupt.h>
+#include <linux/device.h> /* for MODULE_ALIAS_CHARDEV_MAJOR */
+
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+static int ircomm_tty_install(struct tty_driver *driver,
+ struct tty_struct *tty);
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp);
+static void ircomm_tty_close(struct tty_struct * tty, struct file *filp);
+static int ircomm_tty_write(struct tty_struct * tty,
+ const unsigned char *buf, int count);
+static int ircomm_tty_write_room(struct tty_struct *tty);
+static void ircomm_tty_throttle(struct tty_struct *tty);
+static void ircomm_tty_unthrottle(struct tty_struct *tty);
+static int ircomm_tty_chars_in_buffer(struct tty_struct *tty);
+static void ircomm_tty_flush_buffer(struct tty_struct *tty);
+static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch);
+static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout);
+static void ircomm_tty_hangup(struct tty_struct *tty);
+static void ircomm_tty_do_softint(struct work_struct *work);
+static void ircomm_tty_shutdown(struct ircomm_tty_cb *self);
+static void ircomm_tty_stop(struct tty_struct *tty);
+
+static int ircomm_tty_data_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static int ircomm_tty_control_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static void ircomm_tty_flow_indication(void *instance, void *sap,
+ LOCAL_FLOW cmd);
+#ifdef CONFIG_PROC_FS
+static const struct file_operations ircomm_tty_proc_fops;
+#endif /* CONFIG_PROC_FS */
+static struct tty_driver *driver;
+
+static hashbin_t *ircomm_tty = NULL;
+
+static const struct tty_operations ops = {
+ .install = ircomm_tty_install,
+ .open = ircomm_tty_open,
+ .close = ircomm_tty_close,
+ .write = ircomm_tty_write,
+ .write_room = ircomm_tty_write_room,
+ .chars_in_buffer = ircomm_tty_chars_in_buffer,
+ .flush_buffer = ircomm_tty_flush_buffer,
+ .ioctl = ircomm_tty_ioctl, /* ircomm_tty_ioctl.c */
+ .tiocmget = ircomm_tty_tiocmget, /* ircomm_tty_ioctl.c */
+ .tiocmset = ircomm_tty_tiocmset, /* ircomm_tty_ioctl.c */
+ .throttle = ircomm_tty_throttle,
+ .unthrottle = ircomm_tty_unthrottle,
+ .send_xchar = ircomm_tty_send_xchar,
+ .set_termios = ircomm_tty_set_termios,
+ .stop = ircomm_tty_stop,
+ .start = ircomm_tty_start,
+ .hangup = ircomm_tty_hangup,
+ .wait_until_sent = ircomm_tty_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &ircomm_tty_proc_fops,
+#endif /* CONFIG_PROC_FS */
+};
+
+static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ /*
+ * Here, we use to lock those two guys, but as ircomm_param_request()
+ * does it itself, I don't see the point (and I see the deadlock).
+ * Jean II
+ */
+ if (raise)
+ self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR;
+ else
+ self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR);
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+}
+
+static int ircomm_port_carrier_raised(struct tty_port *port)
+{
+ struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb,
+ port);
+ return self->settings.dce & IRCOMM_CD;
+}
+
+static const struct tty_port_operations ircomm_port_ops = {
+ .dtr_rts = ircomm_port_raise_dtr_rts,
+ .carrier_raised = ircomm_port_carrier_raised,
+};
+
+/*
+ * Function ircomm_tty_init()
+ *
+ * Init IrCOMM TTY layer/driver
+ *
+ */
+static int __init ircomm_tty_init(void)
+{
+ driver = alloc_tty_driver(IRCOMM_TTY_PORTS);
+ if (!driver)
+ return -ENOMEM;
+ ircomm_tty = hashbin_new(HB_LOCK);
+ if (ircomm_tty == NULL) {
+ net_err_ratelimited("%s(), can't allocate hashbin!\n",
+ __func__);
+ put_tty_driver(driver);
+ return -ENOMEM;
+ }
+
+ driver->driver_name = "ircomm";
+ driver->name = "ircomm";
+ driver->major = IRCOMM_TTY_MAJOR;
+ driver->minor_start = IRCOMM_TTY_MINOR;
+ driver->type = TTY_DRIVER_TYPE_SERIAL;
+ driver->subtype = SERIAL_TYPE_NORMAL;
+ driver->init_termios = tty_std_termios;
+ driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(driver, &ops);
+ if (tty_register_driver(driver)) {
+ net_err_ratelimited("%s(): Couldn't register serial driver\n",
+ __func__);
+ put_tty_driver(driver);
+ return -1;
+ }
+ return 0;
+}
+
+static void __exit __ircomm_tty_cleanup(struct ircomm_tty_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ ircomm_tty_shutdown(self);
+
+ self->magic = 0;
+ tty_port_destroy(&self->port);
+ kfree(self);
+}
+
+/*
+ * Function ircomm_tty_cleanup ()
+ *
+ * Remove IrCOMM TTY layer/driver
+ *
+ */
+static void __exit ircomm_tty_cleanup(void)
+{
+ int ret;
+
+ ret = tty_unregister_driver(driver);
+ if (ret) {
+ net_err_ratelimited("%s(), failed to unregister driver\n",
+ __func__);
+ return;
+ }
+
+ hashbin_delete(ircomm_tty, (FREE_FUNC) __ircomm_tty_cleanup);
+ put_tty_driver(driver);
+}
+
+/*
+ * Function ircomm_startup (self)
+ *
+ *
+ *
+ */
+static int ircomm_tty_startup(struct ircomm_tty_cb *self)
+{
+ notify_t notify;
+ int ret = -ENODEV;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ /* Check if already open */
+ if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) {
+ pr_debug("%s(), already open so break out!\n", __func__);
+ return 0;
+ }
+
+ /* Register with IrCOMM */
+ irda_notify_init(&notify);
+ /* These callbacks we must handle ourselves */
+ notify.data_indication = ircomm_tty_data_indication;
+ notify.udata_indication = ircomm_tty_control_indication;
+ notify.flow_indication = ircomm_tty_flow_indication;
+
+ /* Use the ircomm_tty interface for these ones */
+ notify.disconnect_indication = ircomm_tty_disconnect_indication;
+ notify.connect_confirm = ircomm_tty_connect_confirm;
+ notify.connect_indication = ircomm_tty_connect_indication;
+ strlcpy(notify.name, "ircomm_tty", sizeof(notify.name));
+ notify.instance = self;
+
+ if (!self->ircomm) {
+ self->ircomm = ircomm_open(&notify, self->service_type,
+ self->line);
+ }
+ if (!self->ircomm)
+ goto err;
+
+ self->slsap_sel = self->ircomm->slsap_sel;
+
+ /* Connect IrCOMM link with remote device */
+ ret = ircomm_tty_attach_cable(self);
+ if (ret < 0) {
+ net_err_ratelimited("%s(), error attaching cable!\n", __func__);
+ goto err;
+ }
+
+ return 0;
+err:
+ clear_bit(ASYNCB_INITIALIZED, &self->port.flags);
+ return ret;
+}
+
+/*
+ * Function ircomm_block_til_ready (self, filp)
+ *
+ *
+ *
+ */
+static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
+ struct tty_struct *tty, struct file *filp)
+{
+ struct tty_port *port = &self->port;
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0;
+ unsigned long flags;
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if (test_bit(TTY_IO_ERROR, &tty->flags)) {
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (filp->f_flags & O_NONBLOCK) {
+ /* nonblock mode is set */
+ if (tty->termios.c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+ pr_debug("%s(), O_NONBLOCK requested!\n", __func__);
+ return 0;
+ }
+
+ if (tty->termios.c_cflag & CLOCAL) {
+ pr_debug("%s(), doing CLOCAL!\n", __func__);
+ do_clocal = 1;
+ }
+
+ /* Wait for carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, port->count is dropped by one, so that
+ * mgsl_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+
+ retval = 0;
+ add_wait_queue(&port->open_wait, &wait);
+
+ pr_debug("%s(%d):block_til_ready before block on %s open_count=%d\n",
+ __FILE__, __LINE__, tty->driver->name, port->count);
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->count--;
+ port->blocked_open++;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ while (1) {
+ if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
+ tty_port_raise_dtr_rts(port);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (tty_hung_up_p(filp) ||
+ !test_bit(ASYNCB_INITIALIZED, &port->flags)) {
+ retval = (port->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+ break;
+ }
+
+ /*
+ * Check if link is ready now. Even if CLOCAL is
+ * specified, we cannot return before the IrCOMM link is
+ * ready
+ */
+ if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
+ (do_clocal || tty_port_carrier_raised(port)) &&
+ self->state == IRCOMM_TTY_READY)
+ {
+ break;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+
+ pr_debug("%s(%d):block_til_ready blocking on %s open_count=%d\n",
+ __FILE__, __LINE__, tty->driver->name, port->count);
+
+ schedule();
+ }
+
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->open_wait, &wait);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (!tty_hung_up_p(filp))
+ port->count++;
+ port->blocked_open--;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ pr_debug("%s(%d):block_til_ready after blocking on %s open_count=%d\n",
+ __FILE__, __LINE__, tty->driver->name, port->count);
+
+ if (!retval)
+ port->flags |= ASYNC_NORMAL_ACTIVE;
+
+ return retval;
+}
+
+
+static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self;
+ unsigned int line = tty->index;
+
+ /* Check if instance already exists */
+ self = hashbin_lock_find(ircomm_tty, line, NULL);
+ if (!self) {
+ /* No, so make new instance */
+ self = kzalloc(sizeof(struct ircomm_tty_cb), GFP_KERNEL);
+ if (self == NULL)
+ return -ENOMEM;
+
+ tty_port_init(&self->port);
+ self->port.ops = &ircomm_port_ops;
+ self->magic = IRCOMM_TTY_MAGIC;
+ self->flow = FLOW_STOP;
+
+ self->line = line;
+ INIT_WORK(&self->tqueue, ircomm_tty_do_softint);
+ self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED;
+ self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED;
+
+ /* Init some important stuff */
+ init_timer(&self->watchdog_timer);
+ spin_lock_init(&self->spinlock);
+
+ /*
+ * Force TTY into raw mode by default which is usually what
+ * we want for IrCOMM and IrLPT. This way applications will
+ * not have to twiddle with printcap etc.
+ *
+ * Note this is completely usafe and doesn't work properly
+ */
+ tty->termios.c_iflag = 0;
+ tty->termios.c_oflag = 0;
+
+ /* Insert into hash */
+ hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
+ }
+
+ tty->driver_data = self;
+
+ return tty_port_install(&self->port, driver, tty);
+}
+
+/*
+ * Function ircomm_tty_open (tty, filp)
+ *
+ * This routine is called when a particular tty device is opened. This
+ * routine is mandatory; if this routine is not filled in, the attempted
+ * open will fail with ENODEV.
+ */
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ struct ircomm_tty_cb *self = tty->driver_data;
+ unsigned long flags;
+ int ret;
+
+ /* ++ is not atomic, so this should be protected - Jean II */
+ spin_lock_irqsave(&self->port.lock, flags);
+ self->port.count++;
+ spin_unlock_irqrestore(&self->port.lock, flags);
+ tty_port_tty_set(&self->port, tty);
+
+ pr_debug("%s(), %s%d, count = %d\n", __func__ , tty->driver->name,
+ self->line, self->port.count);
+
+ /* Not really used by us, but lets do it anyway */
+ self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ /*
+ * If the port is the middle of closing, bail out now
+ */
+ if (test_bit(ASYNCB_CLOSING, &self->port.flags)) {
+
+ /* Hm, why are we blocking on ASYNC_CLOSING if we
+ * do return -EAGAIN/-ERESTARTSYS below anyway?
+ * IMHO it's either not needed in the first place
+ * or for some reason we need to make sure the async
+ * closing has been finished - if so, wouldn't we
+ * probably better sleep uninterruptible?
+ */
+
+ if (wait_event_interruptible(self->port.close_wait,
+ !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
+ net_warn_ratelimited("%s - got signal while blocking on ASYNC_CLOSING!\n",
+ __func__);
+ return -ERESTARTSYS;
+ }
+
+#ifdef SERIAL_DO_RESTART
+ return (self->port.flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /* Check if this is a "normal" ircomm device, or an irlpt device */
+ if (self->line < 0x10) {
+ self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
+ self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */
+ /* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */
+ self->settings.dce = IRCOMM_CTS | IRCOMM_CD | IRCOMM_DSR | IRCOMM_RI; /* Default line settings */
+ pr_debug("%s(), IrCOMM device\n", __func__);
+ } else {
+ pr_debug("%s(), IrLPT device\n", __func__);
+ self->service_type = IRCOMM_3_WIRE_RAW;
+ self->settings.service_type = IRCOMM_3_WIRE_RAW; /* Default */
+ }
+
+ ret = ircomm_tty_startup(self);
+ if (ret)
+ return ret;
+
+ ret = ircomm_tty_block_til_ready(self, tty, filp);
+ if (ret) {
+ pr_debug("%s(), returning after block_til_ready with %d\n",
+ __func__, ret);
+
+ return ret;
+ }
+ return 0;
+}
+
+/*
+ * Function ircomm_tty_close (tty, filp)
+ *
+ * This routine is called when a particular tty device is closed.
+ *
+ */
+static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ struct tty_port *port = &self->port;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
+
+ ircomm_tty_shutdown(self);
+
+ tty_driver_flush_buffer(tty);
+
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
+}
+
+/*
+ * Function ircomm_tty_flush_buffer (tty)
+ *
+ *
+ *
+ */
+static void ircomm_tty_flush_buffer(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /*
+ * Let do_softint() do this to avoid race condition with
+ * do_softint() ;-)
+ */
+ schedule_work(&self->tqueue);
+}
+
+/*
+ * Function ircomm_tty_do_softint (work)
+ *
+ * We use this routine to give the write wakeup to the user at at a
+ * safe time (as fast as possible after write have completed). This
+ * can be compared to the Tx interrupt.
+ */
+static void ircomm_tty_do_softint(struct work_struct *work)
+{
+ struct ircomm_tty_cb *self =
+ container_of(work, struct ircomm_tty_cb, tqueue);
+ struct tty_struct *tty;
+ unsigned long flags;
+ struct sk_buff *skb, *ctrl_skb;
+
+ if (!self || self->magic != IRCOMM_TTY_MAGIC)
+ return;
+
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
+ return;
+
+ /* Unlink control buffer */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ ctrl_skb = self->ctrl_skb;
+ self->ctrl_skb = NULL;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ /* Flush control buffer if any */
+ if(ctrl_skb) {
+ if(self->flow == FLOW_START)
+ ircomm_control_request(self->ircomm, ctrl_skb);
+ /* Drop reference count - see ircomm_ttp_data_request(). */
+ dev_kfree_skb(ctrl_skb);
+ }
+
+ if (tty->hw_stopped)
+ goto put;
+
+ /* Unlink transmit buffer */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ skb = self->tx_skb;
+ self->tx_skb = NULL;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ /* Flush transmit buffer if any */
+ if (skb) {
+ ircomm_tty_do_event(self, IRCOMM_TTY_DATA_REQUEST, skb, NULL);
+ /* Drop reference count - see ircomm_ttp_data_request(). */
+ dev_kfree_skb(skb);
+ }
+
+ /* Check if user (still) wants to be waken up */
+ tty_wakeup(tty);
+put:
+ tty_kref_put(tty);
+}
+
+/*
+ * Function ircomm_tty_write (tty, buf, count)
+ *
+ * This routine is called by the kernel to write a series of characters
+ * to the tty device. The characters may come from user space or kernel
+ * space. This routine will return the number of characters actually
+ * accepted for writing. This routine is mandatory.
+ */
+static int ircomm_tty_write(struct tty_struct *tty,
+ const unsigned char *buf, int count)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned long flags;
+ struct sk_buff *skb;
+ int tailroom = 0;
+ int len = 0;
+ int size;
+
+ pr_debug("%s(), count=%d, hw_stopped=%d\n", __func__ , count,
+ tty->hw_stopped);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ /* We may receive packets from the TTY even before we have finished
+ * our setup. Not cool.
+ * The problem is that we don't know the final header and data size
+ * to create the proper skb, so any skb we would create would have
+ * bogus header and data size, so need care.
+ * We use a bogus header size to safely detect this condition.
+ * Another problem is that hw_stopped was set to 0 way before it
+ * should be, so we would drop this skb. It should now be fixed.
+ * One option is to not accept data until we are properly setup.
+ * But, I suspect that when it happens, the ppp line discipline
+ * just "drops" the data, which might screw up connect scripts.
+ * The second option is to create a "safe skb", with large header
+ * and small size (see ircomm_tty_open() for values).
+ * We just need to make sure that when the real values get filled,
+ * we don't mess up the original "safe skb" (see tx_data_size).
+ * Jean II */
+ if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) {
+ pr_debug("%s() : not initialised\n", __func__);
+#ifdef IRCOMM_NO_TX_BEFORE_INIT
+ /* We didn't consume anything, TTY will retry */
+ return 0;
+#endif
+ }
+
+ if (count < 1)
+ return 0;
+
+ /* Protect our manipulation of self->tx_skb and related */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ /* Fetch current transmit buffer */
+ skb = self->tx_skb;
+
+ /*
+ * Send out all the data we get, possibly as multiple fragmented
+ * frames, but this will only happen if the data is larger than the
+ * max data size. The normal case however is just the opposite, and
+ * this function may be called multiple times, and will then actually
+ * defragment the data and send it out as one packet as soon as
+ * possible, but at a safer point in time
+ */
+ while (count) {
+ size = count;
+
+ /* Adjust data size to the max data size */
+ if (size > self->max_data_size)
+ size = self->max_data_size;
+
+ /*
+ * Do we already have a buffer ready for transmit, or do
+ * we need to allocate a new frame
+ */
+ if (skb) {
+ /*
+ * Any room for more data at the end of the current
+ * transmit buffer? Cannot use skb_tailroom, since
+ * dev_alloc_skb gives us a larger skb than we
+ * requested
+ * Note : use tx_data_size, because max_data_size
+ * may have changed and we don't want to overwrite
+ * the skb. - Jean II
+ */
+ if ((tailroom = (self->tx_data_size - skb->len)) > 0) {
+ /* Adjust data to tailroom */
+ if (size > tailroom)
+ size = tailroom;
+ } else {
+ /*
+ * Current transmit frame is full, so break
+ * out, so we can send it as soon as possible
+ */
+ break;
+ }
+ } else {
+ /* Prepare a full sized frame */
+ skb = alloc_skb(self->max_data_size+
+ self->max_header_size,
+ GFP_ATOMIC);
+ if (!skb) {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -ENOBUFS;
+ }
+ skb_reserve(skb, self->max_header_size);
+ self->tx_skb = skb;
+ /* Remember skb size because max_data_size may
+ * change later on - Jean II */
+ self->tx_data_size = self->max_data_size;
+ }
+
+ /* Copy data */
+ memcpy(skb_put(skb,size), buf + len, size);
+
+ count -= size;
+ len += size;
+ }
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ /*
+ * Schedule a new thread which will transmit the frame as soon
+ * as possible, but at a safe point in time. We do this so the
+ * "user" can give us data multiple times, as PPP does (because of
+ * its 256 byte tx buffer). We will then defragment and send out
+ * all this data as one single packet.
+ */
+ schedule_work(&self->tqueue);
+
+ return len;
+}
+
+/*
+ * Function ircomm_tty_write_room (tty)
+ *
+ * This routine returns the numbers of characters the tty driver will
+ * accept for queuing to be written. This number is subject to change as
+ * output buffers get emptied, or if the output flow control is acted.
+ */
+static int ircomm_tty_write_room(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned long flags;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+#ifdef IRCOMM_NO_TX_BEFORE_INIT
+ /* max_header_size tells us if the channel is initialised or not. */
+ if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED)
+ /* Don't bother us yet */
+ return 0;
+#endif
+
+ /* Check if we are allowed to transmit any data.
+ * hw_stopped is the regular flow control.
+ * Jean II */
+ if (tty->hw_stopped)
+ ret = 0;
+ else {
+ spin_lock_irqsave(&self->spinlock, flags);
+ if (self->tx_skb)
+ ret = self->tx_data_size - self->tx_skb->len;
+ else
+ ret = self->max_data_size;
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+ pr_debug("%s(), ret=%d\n", __func__ , ret);
+
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_wait_until_sent (tty, timeout)
+ *
+ * This routine waits until the device has written out all of the
+ * characters in its transmitter FIFO.
+ */
+static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned long orig_jiffies, poll_time;
+ unsigned long flags;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ orig_jiffies = jiffies;
+
+ /* Set poll time to 200 ms */
+ poll_time = msecs_to_jiffies(200);
+ if (timeout)
+ poll_time = min_t(unsigned long, timeout, poll_time);
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ while (self->tx_skb && self->tx_skb->len) {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ schedule_timeout_interruptible(poll_time);
+ spin_lock_irqsave(&self->spinlock, flags);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ __set_current_state(TASK_RUNNING);
+}
+
+/*
+ * Function ircomm_tty_throttle (tty)
+ *
+ * This routine notifies the tty driver that input buffers for the line
+ * discipline are close to full, and it should somehow signal that no
+ * more characters should be sent to the tty.
+ */
+static void ircomm_tty_throttle(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /* Software flow control? */
+ if (I_IXOFF(tty))
+ ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
+
+ /* Hardware flow control? */
+ if (tty->termios.c_cflag & CRTSCTS) {
+ self->settings.dte &= ~IRCOMM_RTS;
+ self->settings.dte |= IRCOMM_DELTA_RTS;
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+ }
+
+ ircomm_flow_request(self->ircomm, FLOW_STOP);
+}
+
+/*
+ * Function ircomm_tty_unthrottle (tty)
+ *
+ * This routine notifies the tty drivers that it should signals that
+ * characters can now be sent to the tty without fear of overrunning the
+ * input buffers of the line disciplines.
+ */
+static void ircomm_tty_unthrottle(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /* Using software flow control? */
+ if (I_IXOFF(tty)) {
+ ircomm_tty_send_xchar(tty, START_CHAR(tty));
+ }
+
+ /* Using hardware flow control? */
+ if (tty->termios.c_cflag & CRTSCTS) {
+ self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+ pr_debug("%s(), FLOW_START\n", __func__);
+ }
+ ircomm_flow_request(self->ircomm, FLOW_START);
+}
+
+/*
+ * Function ircomm_tty_chars_in_buffer (tty)
+ *
+ * Indicates if there are any data in the buffer
+ *
+ */
+static int ircomm_tty_chars_in_buffer(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned long flags;
+ int len = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->tx_skb)
+ len = self->tx_skb->len;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ return len;
+}
+
+static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
+{
+ unsigned long flags;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags))
+ return;
+
+ ircomm_tty_detach_cable(self);
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ del_timer(&self->watchdog_timer);
+
+ /* Free parameter buffer */
+ if (self->ctrl_skb) {
+ dev_kfree_skb(self->ctrl_skb);
+ self->ctrl_skb = NULL;
+ }
+
+ /* Free transmit buffer */
+ if (self->tx_skb) {
+ dev_kfree_skb(self->tx_skb);
+ self->tx_skb = NULL;
+ }
+
+ if (self->ircomm) {
+ ircomm_close(self->ircomm);
+ self->ircomm = NULL;
+ }
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+}
+
+/*
+ * Function ircomm_tty_hangup (tty)
+ *
+ * This routine notifies the tty driver that it should hangup the tty
+ * device.
+ *
+ */
+static void ircomm_tty_hangup(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ struct tty_port *port = &self->port;
+ unsigned long flags;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /* ircomm_tty_flush_buffer(tty); */
+ ircomm_tty_shutdown(self);
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
+ if (port->tty) {
+ set_bit(TTY_IO_ERROR, &port->tty->flags);
+ tty_kref_put(port->tty);
+ }
+ port->tty = NULL;
+ port->count = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ wake_up_interruptible(&port->open_wait);
+}
+
+/*
+ * Function ircomm_tty_send_xchar (tty, ch)
+ *
+ * This routine is used to send a high-priority XON/XOFF character to
+ * the device.
+ */
+static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch)
+{
+ pr_debug("%s(), not impl\n", __func__);
+}
+
+/*
+ * Function ircomm_tty_start (tty)
+ *
+ * This routine notifies the tty driver that it resume sending
+ * characters to the tty device.
+ */
+void ircomm_tty_start(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ ircomm_flow_request(self->ircomm, FLOW_START);
+}
+
+/*
+ * Function ircomm_tty_stop (tty)
+ *
+ * This routine notifies the tty driver that it should stop outputting
+ * characters to the tty device.
+ */
+static void ircomm_tty_stop(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ ircomm_flow_request(self->ircomm, FLOW_STOP);
+}
+
+/*
+ * Function ircomm_check_modem_status (self)
+ *
+ * Check for any changes in the DCE's line settings. This function should
+ * be called whenever the dce parameter settings changes, to update the
+ * flow control settings and other things
+ */
+void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
+{
+ struct tty_struct *tty;
+ int status;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ tty = tty_port_tty_get(&self->port);
+
+ status = self->settings.dce;
+
+ if (status & IRCOMM_DCE_DELTA_ANY) {
+ /*wake_up_interruptible(&self->delta_msr_wait);*/
+ }
+ if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
+ pr_debug("%s(), ircomm%d CD now %s...\n", __func__ , self->line,
+ (status & IRCOMM_CD) ? "on" : "off");
+
+ if (status & IRCOMM_CD) {
+ wake_up_interruptible(&self->port.open_wait);
+ } else {
+ pr_debug("%s(), Doing serial hangup..\n", __func__);
+ if (tty)
+ tty_hangup(tty);
+
+ /* Hangup will remote the tty, so better break out */
+ goto put;
+ }
+ }
+ if (tty && tty_port_cts_enabled(&self->port)) {
+ if (tty->hw_stopped) {
+ if (status & IRCOMM_CTS) {
+ pr_debug("%s(), CTS tx start...\n", __func__);
+ tty->hw_stopped = 0;
+
+ /* Wake up processes blocked on open */
+ wake_up_interruptible(&self->port.open_wait);
+
+ schedule_work(&self->tqueue);
+ goto put;
+ }
+ } else {
+ if (!(status & IRCOMM_CTS)) {
+ pr_debug("%s(), CTS tx stop...\n", __func__);
+ tty->hw_stopped = 1;
+ }
+ }
+ }
+put:
+ tty_kref_put(tty);
+}
+
+/*
+ * Function ircomm_tty_data_indication (instance, sap, skb)
+ *
+ * Handle incoming data, and deliver it to the line discipline
+ *
+ */
+static int ircomm_tty_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ tty = tty_port_tty_get(&self->port);
+ if (!tty) {
+ pr_debug("%s(), no tty!\n", __func__);
+ return 0;
+ }
+
+ /*
+ * If we receive data when hardware is stopped then something is wrong.
+ * We try to poll the peers line settings to check if we are up todate.
+ * Devices like WinCE can do this, and since they don't send any
+ * params, we can just as well declare the hardware for running.
+ */
+ if (tty->hw_stopped && (self->flow == FLOW_START)) {
+ pr_debug("%s(), polling for line settings!\n", __func__);
+ ircomm_param_request(self, IRCOMM_POLL, TRUE);
+
+ /* We can just as well declare the hardware for running */
+ ircomm_tty_send_initial_parameters(self);
+ ircomm_tty_link_established(self);
+ }
+ tty_kref_put(tty);
+
+ /*
+ * Use flip buffer functions since the code may be called from interrupt
+ * context
+ */
+ tty_insert_flip_string(&self->port, skb->data, skb->len);
+ tty_flip_buffer_push(&self->port);
+
+ /* No need to kfree_skb - see ircomm_ttp_data_indication() */
+
+ return 0;
+}
+
+/*
+ * Function ircomm_tty_control_indication (instance, sap, skb)
+ *
+ * Parse all incoming parameters (easy!)
+ *
+ */
+static int ircomm_tty_control_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ int clen;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ clen = skb->data[0];
+
+ irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen),
+ &ircomm_param_info);
+
+ /* No need to kfree_skb - see ircomm_control_indication() */
+
+ return 0;
+}
+
+/*
+ * Function ircomm_tty_flow_indication (instance, sap, cmd)
+ *
+ * This function is called by IrTTP when it wants us to slow down the
+ * transmission of data. We just mark the hardware as stopped, and wait
+ * for IrTTP to notify us that things are OK again.
+ */
+static void ircomm_tty_flow_indication(void *instance, void *sap,
+ LOCAL_FLOW cmd)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ tty = tty_port_tty_get(&self->port);
+
+ switch (cmd) {
+ case FLOW_START:
+ pr_debug("%s(), hw start!\n", __func__);
+ if (tty)
+ tty->hw_stopped = 0;
+
+ /* ircomm_tty_do_softint will take care of the rest */
+ schedule_work(&self->tqueue);
+ break;
+ default: /* If we get here, something is very wrong, better stop */
+ case FLOW_STOP:
+ pr_debug("%s(), hw stopped!\n", __func__);
+ if (tty)
+ tty->hw_stopped = 1;
+ break;
+ }
+
+ tty_kref_put(tty);
+ self->flow = cmd;
+}
+
+#ifdef CONFIG_PROC_FS
+static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
+{
+ struct tty_struct *tty;
+ char sep;
+
+ seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]);
+
+ seq_puts(m, "Service type: ");
+ if (self->service_type & IRCOMM_9_WIRE)
+ seq_puts(m, "9_WIRE");
+ else if (self->service_type & IRCOMM_3_WIRE)
+ seq_puts(m, "3_WIRE");
+ else if (self->service_type & IRCOMM_3_WIRE_RAW)
+ seq_puts(m, "3_WIRE_RAW");
+ else
+ seq_puts(m, "No common service type!\n");
+ seq_putc(m, '\n');
+
+ seq_printf(m, "Port name: %s\n", self->settings.port_name);
+
+ seq_printf(m, "DTE status:");
+ sep = ' ';
+ if (self->settings.dte & IRCOMM_RTS) {
+ seq_printf(m, "%cRTS", sep);
+ sep = '|';
+ }
+ if (self->settings.dte & IRCOMM_DTR) {
+ seq_printf(m, "%cDTR", sep);
+ sep = '|';
+ }
+ seq_putc(m, '\n');
+
+ seq_puts(m, "DCE status:");
+ sep = ' ';
+ if (self->settings.dce & IRCOMM_CTS) {
+ seq_printf(m, "%cCTS", sep);
+ sep = '|';
+ }
+ if (self->settings.dce & IRCOMM_DSR) {
+ seq_printf(m, "%cDSR", sep);
+ sep = '|';
+ }
+ if (self->settings.dce & IRCOMM_CD) {
+ seq_printf(m, "%cCD", sep);
+ sep = '|';
+ }
+ if (self->settings.dce & IRCOMM_RI) {
+ seq_printf(m, "%cRI", sep);
+ sep = '|';
+ }
+ seq_putc(m, '\n');
+
+ seq_puts(m, "Configuration: ");
+ if (!self->settings.null_modem)
+ seq_puts(m, "DTE <-> DCE\n");
+ else
+ seq_puts(m, "DTE <-> DTE (null modem emulation)\n");
+
+ seq_printf(m, "Data rate: %d\n", self->settings.data_rate);
+
+ seq_puts(m, "Flow control:");
+ sep = ' ';
+ if (self->settings.flow_control & IRCOMM_XON_XOFF_IN) {
+ seq_printf(m, "%cXON_XOFF_IN", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_XON_XOFF_OUT) {
+ seq_printf(m, "%cXON_XOFF_OUT", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_RTS_CTS_IN) {
+ seq_printf(m, "%cRTS_CTS_IN", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_RTS_CTS_OUT) {
+ seq_printf(m, "%cRTS_CTS_OUT", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_DSR_DTR_IN) {
+ seq_printf(m, "%cDSR_DTR_IN", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_DSR_DTR_OUT) {
+ seq_printf(m, "%cDSR_DTR_OUT", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_ENQ_ACK_IN) {
+ seq_printf(m, "%cENQ_ACK_IN", sep);
+ sep = '|';
+ }
+ if (self->settings.flow_control & IRCOMM_ENQ_ACK_OUT) {
+ seq_printf(m, "%cENQ_ACK_OUT", sep);
+ sep = '|';
+ }
+ seq_putc(m, '\n');
+
+ seq_puts(m, "Flags:");
+ sep = ' ';
+ if (tty_port_cts_enabled(&self->port)) {
+ seq_printf(m, "%cASYNC_CTS_FLOW", sep);
+ sep = '|';
+ }
+ if (self->port.flags & ASYNC_CHECK_CD) {
+ seq_printf(m, "%cASYNC_CHECK_CD", sep);
+ sep = '|';
+ }
+ if (self->port.flags & ASYNC_INITIALIZED) {
+ seq_printf(m, "%cASYNC_INITIALIZED", sep);
+ sep = '|';
+ }
+ if (self->port.flags & ASYNC_LOW_LATENCY) {
+ seq_printf(m, "%cASYNC_LOW_LATENCY", sep);
+ sep = '|';
+ }
+ if (self->port.flags & ASYNC_CLOSING) {
+ seq_printf(m, "%cASYNC_CLOSING", sep);
+ sep = '|';
+ }
+ if (self->port.flags & ASYNC_NORMAL_ACTIVE) {
+ seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep);
+ sep = '|';
+ }
+ seq_putc(m, '\n');
+
+ seq_printf(m, "Role: %s\n", self->client ? "client" : "server");
+ seq_printf(m, "Open count: %d\n", self->port.count);
+ seq_printf(m, "Max data size: %d\n", self->max_data_size);
+ seq_printf(m, "Max header size: %d\n", self->max_header_size);
+
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
+ seq_printf(m, "Hardware: %s\n",
+ tty->hw_stopped ? "Stopped" : "Running");
+ tty_kref_put(tty);
+ }
+}
+
+static int ircomm_tty_proc_show(struct seq_file *m, void *v)
+{
+ struct ircomm_tty_cb *self;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ircomm_tty->hb_spinlock, flags);
+
+ self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty);
+ while (self != NULL) {
+ if (self->magic != IRCOMM_TTY_MAGIC)
+ break;
+
+ ircomm_tty_line_info(self, m);
+ self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty);
+ }
+ spin_unlock_irqrestore(&ircomm_tty->hb_spinlock, flags);
+ return 0;
+}
+
+static int ircomm_tty_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ircomm_tty_proc_show, NULL);
+}
+
+static const struct file_operations ircomm_tty_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ircomm_tty_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif /* CONFIG_PROC_FS */
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("IrCOMM serial TTY driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(IRCOMM_TTY_MAJOR);
+
+module_init(ircomm_tty_init);
+module_exit(ircomm_tty_cleanup);
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
new file mode 100644
index 000000000..61137f8b5
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -0,0 +1,987 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_tty_attach.c
+ * Version:
+ * Description: Code for attaching the serial driver to IrCOMM
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Jun 5 17:42:00 1999
+ * Modified at: Tue Jan 4 14:20:49 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/sched.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/parameters.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_event.h>
+
+#include <net/irda/ircomm_tty.h>
+#include <net/irda/ircomm_tty_attach.h>
+
+static void ircomm_tty_ias_register(struct ircomm_tty_cb *self);
+static void ircomm_tty_discovery_indication(discinfo_t *discovery,
+ DISCOVERY_MODE mode,
+ void *priv);
+static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id,
+ struct ias_value *value, void *priv);
+static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self,
+ int timeout);
+static void ircomm_tty_watchdog_timer_expired(void *data);
+
+static int ircomm_tty_state_idle(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+static int ircomm_tty_state_search(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+static int ircomm_tty_state_setup(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+static int ircomm_tty_state_ready(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info);
+
+const char *const ircomm_tty_state[] = {
+ "IRCOMM_TTY_IDLE",
+ "IRCOMM_TTY_SEARCH",
+ "IRCOMM_TTY_QUERY_PARAMETERS",
+ "IRCOMM_TTY_QUERY_LSAP_SEL",
+ "IRCOMM_TTY_SETUP",
+ "IRCOMM_TTY_READY",
+ "*** ERROR *** ",
+};
+
+static const char *const ircomm_tty_event[] __maybe_unused = {
+ "IRCOMM_TTY_ATTACH_CABLE",
+ "IRCOMM_TTY_DETACH_CABLE",
+ "IRCOMM_TTY_DATA_REQUEST",
+ "IRCOMM_TTY_DATA_INDICATION",
+ "IRCOMM_TTY_DISCOVERY_REQUEST",
+ "IRCOMM_TTY_DISCOVERY_INDICATION",
+ "IRCOMM_TTY_CONNECT_CONFIRM",
+ "IRCOMM_TTY_CONNECT_INDICATION",
+ "IRCOMM_TTY_DISCONNECT_REQUEST",
+ "IRCOMM_TTY_DISCONNECT_INDICATION",
+ "IRCOMM_TTY_WD_TIMER_EXPIRED",
+ "IRCOMM_TTY_GOT_PARAMETERS",
+ "IRCOMM_TTY_GOT_LSAPSEL",
+ "*** ERROR ****",
+};
+
+static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb, struct ircomm_tty_info *info) =
+{
+ ircomm_tty_state_idle,
+ ircomm_tty_state_search,
+ ircomm_tty_state_query_parameters,
+ ircomm_tty_state_query_lsap_sel,
+ ircomm_tty_state_setup,
+ ircomm_tty_state_ready,
+};
+
+/*
+ * Function ircomm_tty_attach_cable (driver)
+ *
+ * Try to attach cable (IrCOMM link). This function will only return
+ * when the link has been connected, or if an error condition occurs.
+ * If success, the return value is the resulting service type.
+ */
+int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
+{
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ /* Check if somebody has already connected to us */
+ if (ircomm_is_connected(self->ircomm)) {
+ pr_debug("%s(), already connected!\n", __func__);
+ return 0;
+ }
+
+ /* Make sure nobody tries to write before the link is up */
+ tty = tty_port_tty_get(&self->port);
+ if (tty) {
+ tty->hw_stopped = 1;
+ tty_kref_put(tty);
+ }
+
+ ircomm_tty_ias_register(self);
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_ATTACH_CABLE, NULL, NULL);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_detach_cable (driver)
+ *
+ * Detach cable, or cable has been detached by peer
+ *
+ */
+void ircomm_tty_detach_cable(struct ircomm_tty_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ del_timer(&self->watchdog_timer);
+
+ /* Remove discovery handler */
+ if (self->ckey) {
+ irlmp_unregister_client(self->ckey);
+ self->ckey = NULL;
+ }
+ /* Remove IrCOMM hint bits */
+ if (self->skey) {
+ irlmp_unregister_service(self->skey);
+ self->skey = NULL;
+ }
+
+ if (self->iriap) {
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+ }
+
+ /* Remove LM-IAS object */
+ if (self->obj) {
+ irias_delete_object(self->obj);
+ self->obj = NULL;
+ }
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_DETACH_CABLE, NULL, NULL);
+
+ /* Reset some values */
+ self->daddr = self->saddr = 0;
+ self->dlsap_sel = self->slsap_sel = 0;
+
+ memset(&self->settings, 0, sizeof(struct ircomm_params));
+}
+
+/*
+ * Function ircomm_tty_ias_register (self)
+ *
+ * Register with LM-IAS depending on which service type we are
+ *
+ */
+static void ircomm_tty_ias_register(struct ircomm_tty_cb *self)
+{
+ __u8 oct_seq[6];
+ __u16 hints;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /* Compute hint bits based on service */
+ hints = irlmp_service_to_hint(S_COMM);
+ if (self->service_type & IRCOMM_3_WIRE_RAW)
+ hints |= irlmp_service_to_hint(S_PRINTER);
+
+ /* Advertise IrCOMM hint bit in discovery */
+ if (!self->skey)
+ self->skey = irlmp_register_service(hints);
+ /* Set up a discovery handler */
+ if (!self->ckey)
+ self->ckey = irlmp_register_client(hints,
+ ircomm_tty_discovery_indication,
+ NULL, (void *) self);
+
+ /* If already done, no need to do it again */
+ if (self->obj)
+ return;
+
+ if (self->service_type & IRCOMM_3_WIRE_RAW) {
+ /* Register IrLPT with LM-IAS */
+ self->obj = irias_new_object("IrLPT", IAS_IRLPT_ID);
+ irias_add_integer_attrib(self->obj, "IrDA:IrLMP:LsapSel",
+ self->slsap_sel, IAS_KERNEL_ATTR);
+ } else {
+ /* Register IrCOMM with LM-IAS */
+ self->obj = irias_new_object("IrDA:IrCOMM", IAS_IRCOMM_ID);
+ irias_add_integer_attrib(self->obj, "IrDA:TinyTP:LsapSel",
+ self->slsap_sel, IAS_KERNEL_ATTR);
+
+ /* Code the parameters into the buffer */
+ irda_param_pack(oct_seq, "bbbbbb",
+ IRCOMM_SERVICE_TYPE, 1, self->service_type,
+ IRCOMM_PORT_TYPE, 1, IRCOMM_SERIAL);
+
+ /* Register parameters with LM-IAS */
+ irias_add_octseq_attrib(self->obj, "Parameters", oct_seq, 6,
+ IAS_KERNEL_ATTR);
+ }
+ irias_insert_object(self->obj);
+}
+
+/*
+ * Function ircomm_tty_ias_unregister (self)
+ *
+ * Remove our IAS object and client hook while connected.
+ *
+ */
+static void ircomm_tty_ias_unregister(struct ircomm_tty_cb *self)
+{
+ /* Remove LM-IAS object now so it is not reused.
+ * IrCOMM deals very poorly with multiple incoming connections.
+ * It should looks a lot more like IrNET, and "dup" a server TSAP
+ * to the application TSAP (based on various rules).
+ * This is a cheap workaround allowing multiple clients to
+ * connect to us. It will not always work.
+ * Each IrCOMM socket has an IAS entry. Incoming connection will
+ * pick the first one found. So, when we are fully connected,
+ * we remove our IAS entries so that the next IAS entry is used.
+ * We do that for *both* client and server, because a server
+ * can also create client instances.
+ * Jean II */
+ if (self->obj) {
+ irias_delete_object(self->obj);
+ self->obj = NULL;
+ }
+
+#if 0
+ /* Remove discovery handler.
+ * While we are connected, we no longer need to receive
+ * discovery events. This would be the case if there is
+ * multiple IrLAP interfaces. Jean II */
+ if (self->ckey) {
+ irlmp_unregister_client(self->ckey);
+ self->ckey = NULL;
+ }
+#endif
+}
+
+/*
+ * Function ircomm_send_initial_parameters (self)
+ *
+ * Send initial parameters to the remote IrCOMM device. These parameters
+ * must be sent before any data.
+ */
+int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (self->service_type & IRCOMM_3_WIRE_RAW)
+ return 0;
+
+ /*
+ * Set default values, but only if the application for some reason
+ * haven't set them already
+ */
+ pr_debug("%s(), data-rate = %d\n", __func__ ,
+ self->settings.data_rate);
+ if (!self->settings.data_rate)
+ self->settings.data_rate = 9600;
+ pr_debug("%s(), data-format = %d\n", __func__ ,
+ self->settings.data_format);
+ if (!self->settings.data_format)
+ self->settings.data_format = IRCOMM_WSIZE_8; /* 8N1 */
+
+ pr_debug("%s(), flow-control = %d\n", __func__ ,
+ self->settings.flow_control);
+ /*self->settings.flow_control = IRCOMM_RTS_CTS_IN|IRCOMM_RTS_CTS_OUT;*/
+
+ /* Do not set delta values for the initial parameters */
+ self->settings.dte = IRCOMM_DTR | IRCOMM_RTS;
+
+ /* Only send service type parameter when we are the client */
+ if (self->client)
+ ircomm_param_request(self, IRCOMM_SERVICE_TYPE, FALSE);
+ ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE);
+ ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
+
+ /* For a 3 wire service, we just flush the last parameter and return */
+ if (self->settings.service_type == IRCOMM_3_WIRE) {
+ ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE);
+ return 0;
+ }
+
+ /* Only 9-wire service types continue here */
+ ircomm_param_request(self, IRCOMM_FLOW_CONTROL, FALSE);
+#if 0
+ ircomm_param_request(self, IRCOMM_XON_XOFF, FALSE);
+ ircomm_param_request(self, IRCOMM_ENQ_ACK, FALSE);
+#endif
+ /* Notify peer that we are ready to receive data */
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+
+ return 0;
+}
+
+/*
+ * Function ircomm_tty_discovery_indication (discovery)
+ *
+ * Remote device is discovered, try query the remote IAS to see which
+ * device it is, and which services it has.
+ *
+ */
+static void ircomm_tty_discovery_indication(discinfo_t *discovery,
+ DISCOVERY_MODE mode,
+ void *priv)
+{
+ struct ircomm_tty_cb *self;
+ struct ircomm_tty_info info;
+
+ /* Important note :
+ * We need to drop all passive discoveries.
+ * The LSAP management of IrComm is deficient and doesn't deal
+ * with the case of two instance connecting to each other
+ * simultaneously (it will deadlock in LMP).
+ * The proper fix would be to use the same technique as in IrNET,
+ * to have one server socket and separate instances for the
+ * connecting/connected socket.
+ * The workaround is to drop passive discovery, which drastically
+ * reduce the probability of this happening.
+ * Jean II */
+ if(mode == DISCOVERY_PASSIVE)
+ return;
+
+ info.daddr = discovery->daddr;
+ info.saddr = discovery->saddr;
+
+ self = priv;
+ ircomm_tty_do_event(self, IRCOMM_TTY_DISCOVERY_INDICATION,
+ NULL, &info);
+}
+
+/*
+ * Function ircomm_tty_disconnect_indication (instance, sap, reason, skb)
+ *
+ * Link disconnected
+ *
+ */
+void ircomm_tty_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *skb)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
+ return;
+
+ /* This will stop control data transfers */
+ self->flow = FLOW_STOP;
+
+ /* Stop data transfers */
+ tty->hw_stopped = 1;
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL,
+ NULL);
+ tty_kref_put(tty);
+}
+
+/*
+ * Function ircomm_tty_getvalue_confirm (result, obj_id, value, priv)
+ *
+ * Got result from the IAS query we make
+ *
+ */
+static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id,
+ struct ias_value *value,
+ void *priv)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) priv;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ /* We probably don't need to make any more queries */
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+
+ /* Check if request succeeded */
+ if (result != IAS_SUCCESS) {
+ pr_debug("%s(), got NULL value!\n", __func__);
+ return;
+ }
+
+ switch (value->type) {
+ case IAS_OCT_SEQ:
+ pr_debug("%s(), got octet sequence\n", __func__);
+
+ irda_param_extract_all(self, value->t.oct_seq, value->len,
+ &ircomm_param_info);
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_GOT_PARAMETERS, NULL,
+ NULL);
+ break;
+ case IAS_INTEGER:
+ /* Got LSAP selector */
+ pr_debug("%s(), got lsapsel = %d\n", __func__ ,
+ value->t.integer);
+
+ if (value->t.integer == -1) {
+ pr_debug("%s(), invalid value!\n", __func__);
+ } else
+ self->dlsap_sel = value->t.integer;
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_GOT_LSAPSEL, NULL, NULL);
+ break;
+ case IAS_MISSING:
+ pr_debug("%s(), got IAS_MISSING\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), got unknown type!\n", __func__);
+ break;
+ }
+ irias_delete_value(value);
+}
+
+/*
+ * Function ircomm_tty_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ * Connection confirmed
+ *
+ */
+void ircomm_tty_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_data_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ self->client = TRUE;
+ self->max_data_size = max_data_size;
+ self->max_header_size = max_header_size;
+ self->flow = FLOW_START;
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_CONFIRM, NULL, NULL);
+
+ /* No need to kfree_skb - see ircomm_ttp_connect_confirm() */
+}
+
+/*
+ * Function ircomm_tty_connect_indication (instance, sap, qos, max_sdu_size,
+ * skb)
+ *
+ * we are discovered and being requested to connect by remote device !
+ *
+ */
+void ircomm_tty_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_data_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+ int clen;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ self->client = FALSE;
+ self->max_data_size = max_data_size;
+ self->max_header_size = max_header_size;
+ self->flow = FLOW_START;
+
+ clen = skb->data[0];
+ if (clen)
+ irda_param_extract_all(self, skb->data+1,
+ IRDA_MIN(skb->len, clen),
+ &ircomm_param_info);
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_INDICATION, NULL, NULL);
+
+ /* No need to kfree_skb - see ircomm_ttp_connect_indication() */
+}
+
+/*
+ * Function ircomm_tty_link_established (self)
+ *
+ * Called when the IrCOMM link is established
+ *
+ */
+void ircomm_tty_link_established(struct ircomm_tty_cb *self)
+{
+ struct tty_struct *tty;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ tty = tty_port_tty_get(&self->port);
+ if (!tty)
+ return;
+
+ del_timer(&self->watchdog_timer);
+
+ /*
+ * IrCOMM link is now up, and if we are not using hardware
+ * flow-control, then declare the hardware as running. Otherwise we
+ * will have to wait for the peer device (DCE) to raise the CTS
+ * line.
+ */
+ if (tty_port_cts_enabled(&self->port) &&
+ ((self->settings.dce & IRCOMM_CTS) == 0)) {
+ pr_debug("%s(), waiting for CTS ...\n", __func__);
+ goto put;
+ } else {
+ pr_debug("%s(), starting hardware!\n", __func__);
+
+ tty->hw_stopped = 0;
+
+ /* Wake up processes blocked on open */
+ wake_up_interruptible(&self->port.open_wait);
+ }
+
+ schedule_work(&self->tqueue);
+put:
+ tty_kref_put(tty);
+}
+
+/*
+ * Function ircomm_tty_start_watchdog_timer (self, timeout)
+ *
+ * Start the watchdog timer. This timer is used to make sure that any
+ * connection attempt is successful, and if not, we will retry after
+ * the timeout
+ */
+static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self,
+ int timeout)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ irda_start_timer(&self->watchdog_timer, timeout, (void *) self,
+ ircomm_tty_watchdog_timer_expired);
+}
+
+/*
+ * Function ircomm_tty_watchdog_timer_expired (data)
+ *
+ * Called when the connect procedure have taken to much time.
+ *
+ */
+static void ircomm_tty_watchdog_timer_expired(void *data)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ ircomm_tty_do_event(self, IRCOMM_TTY_WD_TIMER_EXPIRED, NULL, NULL);
+}
+
+
+/*
+ * Function ircomm_tty_do_event (self, event, skb)
+ *
+ * Process event
+ *
+ */
+int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb, struct ircomm_tty_info *info)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+ return (*state[self->state])(self, event, skb, info);
+}
+
+/*
+ * Function ircomm_tty_next_state (self, state)
+ *
+ * Switch state
+ *
+ */
+static inline void ircomm_tty_next_state(struct ircomm_tty_cb *self, IRCOMM_TTY_STATE state)
+{
+ /*
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+ pr_debug("%s: next state=%s, service type=%d\n", __func__ ,
+ ircomm_tty_state[self->state], self->service_type);
+ */
+ self->state = state;
+}
+
+/*
+ * Function ircomm_tty_state_idle (self, event, skb, info)
+ *
+ * Just hanging around
+ *
+ */
+static int ircomm_tty_state_idle(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+ switch (event) {
+ case IRCOMM_TTY_ATTACH_CABLE:
+ /* Try to discover any remote devices */
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+
+ irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+ break;
+ case IRCOMM_TTY_DISCOVERY_INDICATION:
+ self->daddr = info->daddr;
+ self->saddr = info->saddr;
+
+ if (self->iriap) {
+ net_warn_ratelimited("%s(), busy with a previous query\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ ircomm_tty_getvalue_confirm);
+
+ iriap_getvaluebyclass_request(self->iriap,
+ self->saddr, self->daddr,
+ "IrDA:IrCOMM", "Parameters");
+
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS);
+ break;
+ case IRCOMM_TTY_CONNECT_INDICATION:
+ del_timer(&self->watchdog_timer);
+
+ /* Accept connection */
+ ircomm_connect_response(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_WD_TIMER_EXPIRED:
+ /* Just stay idle */
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_state_search (self, event, skb, info)
+ *
+ * Trying to discover an IrCOMM device
+ *
+ */
+static int ircomm_tty_state_search(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+ switch (event) {
+ case IRCOMM_TTY_DISCOVERY_INDICATION:
+ self->daddr = info->daddr;
+ self->saddr = info->saddr;
+
+ if (self->iriap) {
+ net_warn_ratelimited("%s(), busy with a previous query\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ ircomm_tty_getvalue_confirm);
+
+ if (self->service_type == IRCOMM_3_WIRE_RAW) {
+ iriap_getvaluebyclass_request(self->iriap, self->saddr,
+ self->daddr, "IrLPT",
+ "IrDA:IrLMP:LsapSel");
+ ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL);
+ } else {
+ iriap_getvaluebyclass_request(self->iriap, self->saddr,
+ self->daddr,
+ "IrDA:IrCOMM",
+ "Parameters");
+
+ ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS);
+ }
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ break;
+ case IRCOMM_TTY_CONNECT_INDICATION:
+ del_timer(&self->watchdog_timer);
+ ircomm_tty_ias_unregister(self);
+
+ /* Accept connection */
+ ircomm_connect_response(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_WD_TIMER_EXPIRED:
+#if 1
+ /* Give up */
+#else
+ /* Try to discover any remote devices */
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+#endif
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_state_query (self, event, skb, info)
+ *
+ * Querying the remote LM-IAS for IrCOMM parameters
+ *
+ */
+static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+ switch (event) {
+ case IRCOMM_TTY_GOT_PARAMETERS:
+ if (self->iriap) {
+ net_warn_ratelimited("%s(), busy with a previous query\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ ircomm_tty_getvalue_confirm);
+
+ iriap_getvaluebyclass_request(self->iriap, self->saddr,
+ self->daddr, "IrDA:IrCOMM",
+ "IrDA:TinyTP:LsapSel");
+
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL);
+ break;
+ case IRCOMM_TTY_WD_TIMER_EXPIRED:
+ /* Go back to search mode */
+ ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ break;
+ case IRCOMM_TTY_CONNECT_INDICATION:
+ del_timer(&self->watchdog_timer);
+ ircomm_tty_ias_unregister(self);
+
+ /* Accept connection */
+ ircomm_connect_response(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_state_query_lsap_sel (self, event, skb, info)
+ *
+ * Query remote LM-IAS for the LSAP selector which we can connect to
+ *
+ */
+static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+ switch (event) {
+ case IRCOMM_TTY_GOT_LSAPSEL:
+ /* Connect to remote device */
+ ret = ircomm_connect_request(self->ircomm, self->dlsap_sel,
+ self->saddr, self->daddr,
+ NULL, self->service_type);
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ ircomm_tty_next_state(self, IRCOMM_TTY_SETUP);
+ break;
+ case IRCOMM_TTY_WD_TIMER_EXPIRED:
+ /* Go back to search mode */
+ ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ break;
+ case IRCOMM_TTY_CONNECT_INDICATION:
+ del_timer(&self->watchdog_timer);
+ ircomm_tty_ias_unregister(self);
+
+ /* Accept connection */
+ ircomm_connect_response(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_state_setup (self, event, skb, info)
+ *
+ * Trying to connect
+ *
+ */
+static int ircomm_tty_state_setup(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s: state=%s, event=%s\n", __func__ ,
+ ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+ switch (event) {
+ case IRCOMM_TTY_CONNECT_CONFIRM:
+ del_timer(&self->watchdog_timer);
+ ircomm_tty_ias_unregister(self);
+
+ /*
+ * Send initial parameters. This will also send out queued
+ * parameters waiting for the connection to come up
+ */
+ ircomm_tty_send_initial_parameters(self);
+ ircomm_tty_link_established(self);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_CONNECT_INDICATION:
+ del_timer(&self->watchdog_timer);
+ ircomm_tty_ias_unregister(self);
+
+ /* Accept connection */
+ ircomm_connect_response(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+ break;
+ case IRCOMM_TTY_WD_TIMER_EXPIRED:
+ /* Go back to search mode */
+ ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ /* ircomm_disconnect_request(self->ircomm, NULL); */
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * Function ircomm_tty_state_ready (self, event, skb, info)
+ *
+ * IrCOMM is now connected
+ *
+ */
+static int ircomm_tty_state_ready(struct ircomm_tty_cb *self,
+ IRCOMM_TTY_EVENT event,
+ struct sk_buff *skb,
+ struct ircomm_tty_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case IRCOMM_TTY_DATA_REQUEST:
+ ret = ircomm_data_request(self->ircomm, skb);
+ break;
+ case IRCOMM_TTY_DETACH_CABLE:
+ ircomm_disconnect_request(self->ircomm, NULL);
+ ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+ break;
+ case IRCOMM_TTY_DISCONNECT_INDICATION:
+ ircomm_tty_ias_register(self);
+ ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+ ircomm_tty_start_watchdog_timer(self, 3*HZ);
+
+ if (self->port.flags & ASYNC_CHECK_CD) {
+ /* Drop carrier */
+ self->settings.dce = IRCOMM_DELTA_CD;
+ ircomm_tty_check_modem_status(self);
+ } else {
+ pr_debug("%s(), hanging up!\n", __func__);
+ tty_port_tty_hangup(&self->port, false);
+ }
+ break;
+ default:
+ pr_debug("%s(), unknown event: %s\n", __func__ ,
+ ircomm_tty_event[event]);
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
new file mode 100644
index 000000000..75ccdbd07
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -0,0 +1,413 @@
+/*********************************************************************
+ *
+ * Filename: ircomm_tty_ioctl.c
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Thu Jun 10 14:39:09 1999
+ * Modified at: Wed Jan 5 14:45:43 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/*
+ * Function ircomm_tty_change_speed (driver)
+ *
+ * Change speed of the driver. If the remote device is a DCE, then this
+ * should make it change the speed of its serial port
+ */
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
+ struct tty_struct *tty)
+{
+ unsigned int cflag, cval;
+ int baud;
+
+ if (!self->ircomm)
+ return;
+
+ cflag = tty->termios.c_cflag;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: cval = IRCOMM_WSIZE_5; break;
+ case CS6: cval = IRCOMM_WSIZE_6; break;
+ case CS7: cval = IRCOMM_WSIZE_7; break;
+ case CS8: cval = IRCOMM_WSIZE_8; break;
+ default: cval = IRCOMM_WSIZE_5; break;
+ }
+ if (cflag & CSTOPB)
+ cval |= IRCOMM_2_STOP_BIT;
+
+ if (cflag & PARENB)
+ cval |= IRCOMM_PARITY_ENABLE;
+ if (!(cflag & PARODD))
+ cval |= IRCOMM_PARITY_EVEN;
+
+ /* Determine divisor based on baud rate */
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+
+ self->settings.data_rate = baud;
+ ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE);
+
+ /* CTS flow control flag and modem status interrupts */
+ if (cflag & CRTSCTS) {
+ self->port.flags |= ASYNC_CTS_FLOW;
+ self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
+ /* This got me. Bummer. Jean II */
+ if (self->service_type == IRCOMM_3_WIRE_RAW)
+ net_warn_ratelimited("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n",
+ __func__);
+ } else {
+ self->port.flags &= ~ASYNC_CTS_FLOW;
+ self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
+ }
+ if (cflag & CLOCAL)
+ self->port.flags &= ~ASYNC_CHECK_CD;
+ else
+ self->port.flags |= ASYNC_CHECK_CD;
+#if 0
+ /*
+ * Set up parity check flag
+ */
+
+ if (I_INPCK(self->tty))
+ driver->read_status_mask |= LSR_FE | LSR_PE;
+ if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty))
+ driver->read_status_mask |= LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ driver->ignore_status_mask = 0;
+ if (I_IGNPAR(driver->tty))
+ driver->ignore_status_mask |= LSR_PE | LSR_FE;
+
+ if (I_IGNBRK(self->tty)) {
+ self->ignore_status_mask |= LSR_BI;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(self->tty))
+ self->ignore_status_mask |= LSR_OE;
+ }
+#endif
+ self->settings.data_format = cval;
+
+ ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
+ ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE);
+}
+
+/*
+ * Function ircomm_tty_set_termios (tty, old_termios)
+ *
+ * This routine allows the tty driver to be notified when device's
+ * termios settings have changed. Note that a well-designed tty driver
+ * should be prepared to accept the case where old == NULL, and try to
+ * do something rational.
+ */
+void ircomm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned int cflag = tty->termios.c_cflag;
+
+ if ((cflag == old_termios->c_cflag) &&
+ (RELEVANT_IFLAG(tty->termios.c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag)))
+ {
+ return;
+ }
+
+ ircomm_tty_change_speed(self, tty);
+
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) &&
+ !(cflag & CBAUD)) {
+ self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS);
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ (cflag & CBAUD)) {
+ self->settings.dte |= IRCOMM_DTR;
+ if (!(tty->termios.c_cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags)) {
+ self->settings.dte |= IRCOMM_RTS;
+ }
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios.c_cflag & CRTSCTS))
+ {
+ tty->hw_stopped = 0;
+ ircomm_tty_start(tty);
+ }
+}
+
+/*
+ * Function ircomm_tty_tiocmget (tty)
+ *
+ *
+ *
+ */
+int ircomm_tty_tiocmget(struct tty_struct *tty)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ unsigned int result;
+
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ result = ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0)
+ | ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0)
+ | ((self->settings.dce & IRCOMM_CD) ? TIOCM_CAR : 0)
+ | ((self->settings.dce & IRCOMM_RI) ? TIOCM_RNG : 0)
+ | ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0)
+ | ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0);
+ return result;
+}
+
+/*
+ * Function ircomm_tty_tiocmset (tty, set, clear)
+ *
+ *
+ *
+ */
+int ircomm_tty_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+ if (set & TIOCM_RTS)
+ self->settings.dte |= IRCOMM_RTS;
+ if (set & TIOCM_DTR)
+ self->settings.dte |= IRCOMM_DTR;
+
+ if (clear & TIOCM_RTS)
+ self->settings.dte &= ~IRCOMM_RTS;
+ if (clear & TIOCM_DTR)
+ self->settings.dte &= ~IRCOMM_DTR;
+
+ if ((set|clear) & TIOCM_RTS)
+ self->settings.dte |= IRCOMM_DELTA_RTS;
+ if ((set|clear) & TIOCM_DTR)
+ self->settings.dte |= IRCOMM_DELTA_DTR;
+
+ ircomm_param_request(self, IRCOMM_DTE, TRUE);
+
+ return 0;
+}
+
+/*
+ * Function get_serial_info (driver, retinfo)
+ *
+ *
+ *
+ */
+static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
+ struct serial_struct __user *retinfo)
+{
+ struct serial_struct info;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset(&info, 0, sizeof(info));
+ info.line = self->line;
+ info.flags = self->port.flags;
+ info.baud_base = self->settings.data_rate;
+ info.close_delay = self->port.close_delay;
+ info.closing_wait = self->port.closing_wait;
+
+ /* For compatibility */
+ info.type = PORT_16550A;
+ info.port = 0;
+ info.irq = 0;
+ info.xmit_fifo_size = 0;
+ info.hub6 = 0;
+ info.custom_divisor = 0;
+
+ if (copy_to_user(retinfo, &info, sizeof(*retinfo)))
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * Function set_serial_info (driver, new_info)
+ *
+ *
+ *
+ */
+static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self,
+ struct serial_struct __user *new_info)
+{
+#if 0
+ struct serial_struct new_serial;
+ struct ircomm_tty_cb old_state, *state;
+
+ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ return -EFAULT;
+
+
+ state = self
+ old_state = *self;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.baud_base != state->settings.data_rate) ||
+ (new_serial.close_delay != state->close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (self->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ self->flags = ((self->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ /* self->custom_divisor = new_serial.custom_divisor; */
+ goto check_and_exit;
+ }
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ if (self->settings.data_rate != new_serial.baud_base) {
+ self->settings.data_rate = new_serial.baud_base;
+ ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE);
+ }
+
+ self->close_delay = new_serial.close_delay * HZ/100;
+ self->closing_wait = new_serial.closing_wait * HZ/100;
+ /* self->custom_divisor = new_serial.custom_divisor; */
+
+ self->flags = ((self->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+
+ if (self->flags & ASYNC_INITIALIZED) {
+ if (((old_state.flags & ASYNC_SPD_MASK) !=
+ (self->flags & ASYNC_SPD_MASK)) ||
+ (old_driver.custom_divisor != driver->custom_divisor)) {
+ if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ driver->tty->alt_speed = 57600;
+ if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ driver->tty->alt_speed = 115200;
+ if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ driver->tty->alt_speed = 230400;
+ if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ driver->tty->alt_speed = 460800;
+ ircomm_tty_change_speed(driver);
+ }
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Function ircomm_tty_ioctl (tty, cmd, arg)
+ *
+ *
+ *
+ */
+int ircomm_tty_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+ int ret = 0;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ ret = ircomm_tty_get_serial_info(self, (struct serial_struct __user *) arg);
+ break;
+ case TIOCSSERIAL:
+ ret = ircomm_tty_set_serial_info(self, (struct serial_struct __user *) arg);
+ break;
+ case TIOCMIWAIT:
+ pr_debug("(), TIOCMIWAIT, not impl!\n");
+ break;
+
+ case TIOCGICOUNT:
+ pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__);
+#if 0
+ save_flags(flags); cli();
+ cnow = driver->icount;
+ restore_flags(flags);
+ p_cuser = (struct serial_icounter_struct __user *) arg;
+ if (put_user(cnow.cts, &p_cuser->cts) ||
+ put_user(cnow.dsr, &p_cuser->dsr) ||
+ put_user(cnow.rng, &p_cuser->rng) ||
+ put_user(cnow.dcd, &p_cuser->dcd) ||
+ put_user(cnow.rx, &p_cuser->rx) ||
+ put_user(cnow.tx, &p_cuser->tx) ||
+ put_user(cnow.frame, &p_cuser->frame) ||
+ put_user(cnow.overrun, &p_cuser->overrun) ||
+ put_user(cnow.parity, &p_cuser->parity) ||
+ put_user(cnow.brk, &p_cuser->brk) ||
+ put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+ return -EFAULT;
+#endif
+ return 0;
+ default:
+ ret = -ENOIOCTLCMD; /* ioctls which we must ignore */
+ }
+ return ret;
+}
+
+
+
diff --git a/net/irda/irda_device.c b/net/irda/irda_device.c
new file mode 100644
index 000000000..856736656
--- /dev/null
+++ b/net/irda/irda_device.c
@@ -0,0 +1,316 @@
+/*********************************************************************
+ *
+ * Filename: irda_device.c
+ * Version: 0.9
+ * Description: Utility functions used by the device drivers
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Oct 9 09:22:27 1999
+ * Modified at: Sun Jan 23 17:41:24 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/capability.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/kmod.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/ioctls.h>
+#include <asm/uaccess.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/wrapper.h>
+
+static void __irda_task_delete(struct irda_task *task);
+
+static hashbin_t *dongles = NULL;
+static hashbin_t *tasks = NULL;
+
+static void irda_task_timer_expired(void *data);
+
+int __init irda_device_init( void)
+{
+ dongles = hashbin_new(HB_NOLOCK);
+ if (dongles == NULL) {
+ net_warn_ratelimited("IrDA: Can't allocate dongles hashbin!\n");
+ return -ENOMEM;
+ }
+ spin_lock_init(&dongles->hb_spinlock);
+
+ tasks = hashbin_new(HB_LOCK);
+ if (tasks == NULL) {
+ net_warn_ratelimited("IrDA: Can't allocate tasks hashbin!\n");
+ hashbin_delete(dongles, NULL);
+ return -ENOMEM;
+ }
+
+ /* We no longer initialise the driver ourselves here, we let
+ * the system do it for us... - Jean II */
+
+ return 0;
+}
+
+static void leftover_dongle(void *arg)
+{
+ struct dongle_reg *reg = arg;
+ net_warn_ratelimited("IrDA: Dongle type %x not unregistered\n",
+ reg->type);
+}
+
+void irda_device_cleanup(void)
+{
+ hashbin_delete(tasks, (FREE_FUNC) __irda_task_delete);
+
+ hashbin_delete(dongles, leftover_dongle);
+}
+
+/*
+ * Function irda_device_set_media_busy (self, status)
+ *
+ * Called when we have detected that another station is transmitting
+ * in contention mode.
+ */
+void irda_device_set_media_busy(struct net_device *dev, int status)
+{
+ struct irlap_cb *self;
+
+ pr_debug("%s(%s)\n", __func__, status ? "TRUE" : "FALSE");
+
+ self = (struct irlap_cb *) dev->atalk_ptr;
+
+ /* Some drivers may enable the receive interrupt before calling
+ * irlap_open(), or they may disable the receive interrupt
+ * after calling irlap_close().
+ * The IrDA stack is protected from this in irlap_driver_rcv().
+ * However, the driver calls directly the wrapper, that calls
+ * us directly. Make sure we protect ourselves.
+ * Jean II */
+ if (!self || self->magic != LAP_MAGIC)
+ return;
+
+ if (status) {
+ self->media_busy = TRUE;
+ if (status == SMALL)
+ irlap_start_mbusy_timer(self, SMALLBUSY_TIMEOUT);
+ else
+ irlap_start_mbusy_timer(self, MEDIABUSY_TIMEOUT);
+ pr_debug("Media busy!\n");
+ } else {
+ self->media_busy = FALSE;
+ irlap_stop_mbusy_timer(self);
+ }
+}
+EXPORT_SYMBOL(irda_device_set_media_busy);
+
+
+/*
+ * Function irda_device_is_receiving (dev)
+ *
+ * Check if the device driver is currently receiving data
+ *
+ */
+int irda_device_is_receiving(struct net_device *dev)
+{
+ struct if_irda_req req;
+ int ret;
+
+ if (!dev->netdev_ops->ndo_do_ioctl) {
+ net_err_ratelimited("%s: do_ioctl not impl. by device driver\n",
+ __func__);
+ return -1;
+ }
+
+ ret = (dev->netdev_ops->ndo_do_ioctl)(dev, (struct ifreq *) &req,
+ SIOCGRECEIVING);
+ if (ret < 0)
+ return ret;
+
+ return req.ifr_receiving;
+}
+
+static void __irda_task_delete(struct irda_task *task)
+{
+ del_timer(&task->timer);
+
+ kfree(task);
+}
+
+static void irda_task_delete(struct irda_task *task)
+{
+ /* Unregister task */
+ hashbin_remove(tasks, (long) task, NULL);
+
+ __irda_task_delete(task);
+}
+
+/*
+ * Function irda_task_kick (task)
+ *
+ * Tries to execute a task possible multiple times until the task is either
+ * finished, or askes for a timeout. When a task is finished, we do post
+ * processing, and notify the parent task, that is waiting for this task
+ * to complete.
+ */
+static int irda_task_kick(struct irda_task *task)
+{
+ int finished = TRUE;
+ int count = 0;
+ int timeout;
+
+ IRDA_ASSERT(task != NULL, return -1;);
+ IRDA_ASSERT(task->magic == IRDA_TASK_MAGIC, return -1;);
+
+ /* Execute task until it's finished, or askes for a timeout */
+ do {
+ timeout = task->function(task);
+ if (count++ > 100) {
+ net_err_ratelimited("%s: error in task handler!\n",
+ __func__);
+ irda_task_delete(task);
+ return TRUE;
+ }
+ } while ((timeout == 0) && (task->state != IRDA_TASK_DONE));
+
+ if (timeout < 0) {
+ net_err_ratelimited("%s: Error executing task!\n", __func__);
+ irda_task_delete(task);
+ return TRUE;
+ }
+
+ /* Check if we are finished */
+ if (task->state == IRDA_TASK_DONE) {
+ del_timer(&task->timer);
+
+ /* Do post processing */
+ if (task->finished)
+ task->finished(task);
+
+ /* Notify parent */
+ if (task->parent) {
+ /* Check if parent is waiting for us to complete */
+ if (task->parent->state == IRDA_TASK_CHILD_WAIT) {
+ task->parent->state = IRDA_TASK_CHILD_DONE;
+
+ /* Stop timer now that we are here */
+ del_timer(&task->parent->timer);
+
+ /* Kick parent task */
+ irda_task_kick(task->parent);
+ }
+ }
+ irda_task_delete(task);
+ } else if (timeout > 0) {
+ irda_start_timer(&task->timer, timeout, (void *) task,
+ irda_task_timer_expired);
+ finished = FALSE;
+ } else {
+ pr_debug("%s(), not finished, and no timeout!\n",
+ __func__);
+ finished = FALSE;
+ }
+
+ return finished;
+}
+
+/*
+ * Function irda_task_timer_expired (data)
+ *
+ * Task time has expired. We now try to execute task (again), and restart
+ * the timer if the task has not finished yet
+ */
+static void irda_task_timer_expired(void *data)
+{
+ struct irda_task *task;
+
+ task = data;
+
+ irda_task_kick(task);
+}
+
+/*
+ * Function irda_device_setup (dev)
+ *
+ * This function should be used by low level device drivers in a similar way
+ * as ether_setup() is used by normal network device drivers
+ */
+static void irda_device_setup(struct net_device *dev)
+{
+ dev->hard_header_len = 0;
+ dev->addr_len = LAP_ALEN;
+
+ dev->type = ARPHRD_IRDA;
+ dev->tx_queue_len = 8; /* Window size + 1 s-frame */
+
+ memset(dev->broadcast, 0xff, LAP_ALEN);
+
+ dev->mtu = 2048;
+ dev->flags = IFF_NOARP;
+}
+
+/*
+ * Funciton alloc_irdadev
+ * Allocates and sets up an IRDA device in a manner similar to
+ * alloc_etherdev.
+ */
+struct net_device *alloc_irdadev(int sizeof_priv)
+{
+ return alloc_netdev(sizeof_priv, "irda%d", NET_NAME_UNKNOWN,
+ irda_device_setup);
+}
+EXPORT_SYMBOL(alloc_irdadev);
+
+#ifdef CONFIG_ISA_DMA_API
+/*
+ * Function setup_dma (idev, buffer, count, mode)
+ *
+ * Setup the DMA channel. Commonly used by LPC FIR drivers
+ *
+ */
+void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode)
+{
+ unsigned long flags;
+
+ flags = claim_dma_lock();
+
+ disable_dma(channel);
+ clear_dma_ff(channel);
+ set_dma_mode(channel, mode);
+ set_dma_addr(channel, buffer);
+ set_dma_count(channel, count);
+ enable_dma(channel);
+
+ release_dma_lock(flags);
+}
+EXPORT_SYMBOL(irda_setup_dma);
+#endif
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
new file mode 100644
index 000000000..4a7ae32af
--- /dev/null
+++ b/net/irda/iriap.c
@@ -0,0 +1,1081 @@
+/*********************************************************************
+ *
+ * Filename: iriap.c
+ * Version: 0.8
+ * Description: Information Access Protocol (IAP)
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Thu Aug 21 00:02:07 1997
+ * Modified at: Sat Dec 25 16:42:42 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap_event.h>
+#include <net/irda/iriap.h>
+
+/* FIXME: This one should go in irlmp.c */
+static const char *const ias_charset_types[] __maybe_unused = {
+ "CS_ASCII",
+ "CS_ISO_8859_1",
+ "CS_ISO_8859_2",
+ "CS_ISO_8859_3",
+ "CS_ISO_8859_4",
+ "CS_ISO_8859_5",
+ "CS_ISO_8859_6",
+ "CS_ISO_8859_7",
+ "CS_ISO_8859_8",
+ "CS_ISO_8859_9",
+ "CS_UNICODE"
+};
+
+static hashbin_t *iriap = NULL;
+static void *service_handle;
+
+static void __iriap_close(struct iriap_cb *self);
+static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode);
+static void iriap_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason, struct sk_buff *skb);
+static void iriap_connect_indication(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb);
+static void iriap_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size, __u8 max_header_size,
+ struct sk_buff *skb);
+static int iriap_data_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+
+static void iriap_watchdog_timer_expired(void *data);
+
+static inline void iriap_start_watchdog_timer(struct iriap_cb *self,
+ int timeout)
+{
+ irda_start_timer(&self->watchdog_timer, timeout, self,
+ iriap_watchdog_timer_expired);
+}
+
+static struct lock_class_key irias_objects_key;
+
+/*
+ * Function iriap_init (void)
+ *
+ * Initializes the IrIAP layer, called by the module initialization code
+ * in irmod.c
+ */
+int __init iriap_init(void)
+{
+ struct ias_object *obj;
+ struct iriap_cb *server;
+ __u8 oct_seq[6];
+ __u16 hints;
+
+ /* Allocate master array */
+ iriap = hashbin_new(HB_LOCK);
+ if (!iriap)
+ return -ENOMEM;
+
+ /* Object repository - defined in irias_object.c */
+ irias_objects = hashbin_new(HB_LOCK);
+ if (!irias_objects) {
+ net_warn_ratelimited("%s: Can't allocate irias_objects hashbin!\n",
+ __func__);
+ hashbin_delete(iriap, NULL);
+ return -ENOMEM;
+ }
+
+ lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key,
+ "irias_objects");
+
+ /*
+ * Register some default services for IrLMP
+ */
+ hints = irlmp_service_to_hint(S_COMPUTER);
+ service_handle = irlmp_register_service(hints);
+
+ /* Register the Device object with LM-IAS */
+ obj = irias_new_object("Device", IAS_DEVICE_ID);
+ irias_add_string_attrib(obj, "DeviceName", "Linux", IAS_KERNEL_ATTR);
+
+ oct_seq[0] = 0x01; /* Version 1 */
+ oct_seq[1] = 0x00; /* IAS support bits */
+ oct_seq[2] = 0x00; /* LM-MUX support bits */
+#ifdef CONFIG_IRDA_ULTRA
+ oct_seq[2] |= 0x04; /* Connectionless Data support */
+#endif
+ irias_add_octseq_attrib(obj, "IrLMPSupport", oct_seq, 3,
+ IAS_KERNEL_ATTR);
+ irias_insert_object(obj);
+
+ /*
+ * Register server support with IrLMP so we can accept incoming
+ * connections
+ */
+ server = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL);
+ if (!server) {
+ pr_debug("%s(), unable to open server\n", __func__);
+ return -1;
+ }
+ iriap_register_lsap(server, LSAP_IAS, IAS_SERVER);
+
+ return 0;
+}
+
+/*
+ * Function iriap_cleanup (void)
+ *
+ * Initializes the IrIAP layer, called by the module cleanup code in
+ * irmod.c
+ */
+void iriap_cleanup(void)
+{
+ irlmp_unregister_service(service_handle);
+
+ hashbin_delete(iriap, (FREE_FUNC) __iriap_close);
+ hashbin_delete(irias_objects, (FREE_FUNC) __irias_delete_object);
+}
+
+/*
+ * Function iriap_open (void)
+ *
+ * Opens an instance of the IrIAP layer, and registers with IrLMP
+ */
+struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv,
+ CONFIRM_CALLBACK callback)
+{
+ struct iriap_cb *self;
+
+ self = kzalloc(sizeof(*self), GFP_ATOMIC);
+ if (!self)
+ return NULL;
+
+ /*
+ * Initialize instance
+ */
+
+ self->magic = IAS_MAGIC;
+ self->mode = mode;
+ if (mode == IAS_CLIENT)
+ iriap_register_lsap(self, slsap_sel, mode);
+
+ self->confirm = callback;
+ self->priv = priv;
+
+ /* iriap_getvaluebyclass_request() will construct packets before
+ * we connect, so this must have a sane value... Jean II */
+ self->max_header_size = LMP_MAX_HEADER;
+
+ init_timer(&self->watchdog_timer);
+
+ hashbin_insert(iriap, (irda_queue_t *) self, (long) self, NULL);
+
+ /* Initialize state machines */
+ iriap_next_client_state(self, S_DISCONNECT);
+ iriap_next_call_state(self, S_MAKE_CALL);
+ iriap_next_server_state(self, R_DISCONNECT);
+ iriap_next_r_connect_state(self, R_WAITING);
+
+ return self;
+}
+EXPORT_SYMBOL(iriap_open);
+
+/*
+ * Function __iriap_close (self)
+ *
+ * Removes (deallocates) the IrIAP instance
+ *
+ */
+static void __iriap_close(struct iriap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ del_timer(&self->watchdog_timer);
+
+ if (self->request_skb)
+ dev_kfree_skb(self->request_skb);
+
+ self->magic = 0;
+
+ kfree(self);
+}
+
+/*
+ * Function iriap_close (void)
+ *
+ * Closes IrIAP and deregisters with IrLMP
+ */
+void iriap_close(struct iriap_cb *self)
+{
+ struct iriap_cb *entry;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ if (self->lsap) {
+ irlmp_close_lsap(self->lsap);
+ self->lsap = NULL;
+ }
+
+ entry = (struct iriap_cb *) hashbin_remove(iriap, (long) self, NULL);
+ IRDA_ASSERT(entry == self, return;);
+
+ __iriap_close(self);
+}
+EXPORT_SYMBOL(iriap_close);
+
+static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode)
+{
+ notify_t notify;
+
+ irda_notify_init(&notify);
+ notify.connect_confirm = iriap_connect_confirm;
+ notify.connect_indication = iriap_connect_indication;
+ notify.disconnect_indication = iriap_disconnect_indication;
+ notify.data_indication = iriap_data_indication;
+ notify.instance = self;
+ if (mode == IAS_CLIENT)
+ strcpy(notify.name, "IrIAS cli");
+ else
+ strcpy(notify.name, "IrIAS srv");
+
+ self->lsap = irlmp_open_lsap(slsap_sel, &notify, 0);
+ if (self->lsap == NULL) {
+ net_err_ratelimited("%s: Unable to allocated LSAP!\n",
+ __func__);
+ return -1;
+ }
+ self->slsap_sel = self->lsap->slsap_sel;
+
+ return 0;
+}
+
+/*
+ * Function iriap_disconnect_indication (handle, reason)
+ *
+ * Got disconnect, so clean up everything associated with this connection
+ *
+ */
+static void iriap_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *skb)
+{
+ struct iriap_cb *self;
+
+ pr_debug("%s(), reason=%s [%d]\n", __func__,
+ irlmp_reason_str(reason), reason);
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ IRDA_ASSERT(iriap != NULL, return;);
+
+ del_timer(&self->watchdog_timer);
+
+ /* Not needed */
+ if (skb)
+ dev_kfree_skb(skb);
+
+ if (self->mode == IAS_CLIENT) {
+ pr_debug("%s(), disconnect as client\n", __func__);
+
+
+ iriap_do_client_event(self, IAP_LM_DISCONNECT_INDICATION,
+ NULL);
+ /*
+ * Inform service user that the request failed by sending
+ * it a NULL value. Warning, the client might close us, so
+ * remember no to use self anymore after calling confirm
+ */
+ if (self->confirm)
+ self->confirm(IAS_DISCONNECT, 0, NULL, self->priv);
+ } else {
+ pr_debug("%s(), disconnect as server\n", __func__);
+ iriap_do_server_event(self, IAP_LM_DISCONNECT_INDICATION,
+ NULL);
+ iriap_close(self);
+ }
+}
+
+/*
+ * Function iriap_disconnect_request (handle)
+ */
+static void iriap_disconnect_request(struct iriap_cb *self)
+{
+ struct sk_buff *tx_skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (tx_skb == NULL) {
+ pr_debug("%s(), Could not allocate an sk_buff of length %d\n",
+ __func__, LMP_MAX_HEADER);
+ return;
+ }
+
+ /*
+ * Reserve space for MUX control and LAP header
+ */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+ irlmp_disconnect_request(self->lsap, tx_skb);
+}
+
+/*
+ * Function iriap_getvaluebyclass (addr, name, attr)
+ *
+ * Retrieve all values from attribute in all objects with given class
+ * name
+ */
+int iriap_getvaluebyclass_request(struct iriap_cb *self,
+ __u32 saddr, __u32 daddr,
+ char *name, char *attr)
+{
+ struct sk_buff *tx_skb;
+ int name_len, attr_len, skb_len;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return -1;);
+
+ /* Client must supply the destination device address */
+ if (!daddr)
+ return -1;
+
+ self->daddr = daddr;
+ self->saddr = saddr;
+
+ /*
+ * Save operation, so we know what the later indication is about
+ */
+ self->operation = GET_VALUE_BY_CLASS;
+
+ /* Give ourselves 10 secs to finish this operation */
+ iriap_start_watchdog_timer(self, 10*HZ);
+
+ name_len = strlen(name); /* Up to IAS_MAX_CLASSNAME = 60 */
+ attr_len = strlen(attr); /* Up to IAS_MAX_ATTRIBNAME = 60 */
+
+ skb_len = self->max_header_size+2+name_len+1+attr_len+4;
+ tx_skb = alloc_skb(skb_len, GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /* Reserve space for MUX and LAP header */
+ skb_reserve(tx_skb, self->max_header_size);
+ skb_put(tx_skb, 3+name_len+attr_len);
+ frame = tx_skb->data;
+
+ /* Build frame */
+ frame[0] = IAP_LST | GET_VALUE_BY_CLASS;
+ frame[1] = name_len; /* Insert length of name */
+ memcpy(frame+2, name, name_len); /* Insert name */
+ frame[2+name_len] = attr_len; /* Insert length of attr */
+ memcpy(frame+3+name_len, attr, attr_len); /* Insert attr */
+
+ iriap_do_client_event(self, IAP_CALL_REQUEST_GVBC, tx_skb);
+
+ /* Drop reference count - see state_s_disconnect(). */
+ dev_kfree_skb(tx_skb);
+
+ return 0;
+}
+EXPORT_SYMBOL(iriap_getvaluebyclass_request);
+
+/*
+ * Function iriap_getvaluebyclass_confirm (self, skb)
+ *
+ * Got result from GetValueByClass command. Parse it and return result
+ * to service user.
+ *
+ */
+static void iriap_getvaluebyclass_confirm(struct iriap_cb *self,
+ struct sk_buff *skb)
+{
+ struct ias_value *value;
+ int charset;
+ __u32 value_len;
+ __u32 tmp_cpu32;
+ __u16 obj_id;
+ __u16 len;
+ __u8 type;
+ __u8 *fp;
+ int n;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Initialize variables */
+ fp = skb->data;
+ n = 2;
+
+ /* Get length, MSB first */
+ len = get_unaligned_be16(fp + n);
+ n += 2;
+
+ pr_debug("%s(), len=%d\n", __func__, len);
+
+ /* Get object ID, MSB first */
+ obj_id = get_unaligned_be16(fp + n);
+ n += 2;
+
+ type = fp[n++];
+ pr_debug("%s(), Value type = %d\n", __func__, type);
+
+ switch (type) {
+ case IAS_INTEGER:
+ memcpy(&tmp_cpu32, fp+n, 4); n += 4;
+ be32_to_cpus(&tmp_cpu32);
+ value = irias_new_integer_value(tmp_cpu32);
+
+ /* Legal values restricted to 0x01-0x6f, page 15 irttp */
+ pr_debug("%s(), lsap=%d\n", __func__, value->t.integer);
+ break;
+ case IAS_STRING:
+ charset = fp[n++];
+
+ switch (charset) {
+ case CS_ASCII:
+ break;
+/* case CS_ISO_8859_1: */
+/* case CS_ISO_8859_2: */
+/* case CS_ISO_8859_3: */
+/* case CS_ISO_8859_4: */
+/* case CS_ISO_8859_5: */
+/* case CS_ISO_8859_6: */
+/* case CS_ISO_8859_7: */
+/* case CS_ISO_8859_8: */
+/* case CS_ISO_8859_9: */
+/* case CS_UNICODE: */
+ default:
+ pr_debug("%s(), charset [%d] %s, not supported\n",
+ __func__, charset,
+ charset < ARRAY_SIZE(ias_charset_types) ?
+ ias_charset_types[charset] :
+ "(unknown)");
+
+ /* Aborting, close connection! */
+ iriap_disconnect_request(self);
+ return;
+ /* break; */
+ }
+ value_len = fp[n++];
+ pr_debug("%s(), strlen=%d\n", __func__, value_len);
+
+ /* Make sure the string is null-terminated */
+ if (n + value_len < skb->len)
+ fp[n + value_len] = 0x00;
+ pr_debug("Got string %s\n", fp+n);
+
+ /* Will truncate to IAS_MAX_STRING bytes */
+ value = irias_new_string_value(fp+n);
+ break;
+ case IAS_OCT_SEQ:
+ value_len = get_unaligned_be16(fp + n);
+ n += 2;
+
+ /* Will truncate to IAS_MAX_OCTET_STRING bytes */
+ value = irias_new_octseq_value(fp+n, value_len);
+ break;
+ default:
+ value = irias_new_missing_value();
+ break;
+ }
+
+ /* Finished, close connection! */
+ iriap_disconnect_request(self);
+
+ /* Warning, the client might close us, so remember no to use self
+ * anymore after calling confirm
+ */
+ if (self->confirm)
+ self->confirm(IAS_SUCCESS, obj_id, value, self->priv);
+ else {
+ pr_debug("%s(), missing handler!\n", __func__);
+ irias_delete_value(value);
+ }
+}
+
+/*
+ * Function iriap_getvaluebyclass_response ()
+ *
+ * Send answer back to remote LM-IAS
+ *
+ */
+static void iriap_getvaluebyclass_response(struct iriap_cb *self,
+ __u16 obj_id,
+ __u8 ret_code,
+ struct ias_value *value)
+{
+ struct sk_buff *tx_skb;
+ int n;
+ __be32 tmp_be32;
+ __be16 tmp_be16;
+ __u8 *fp;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+ IRDA_ASSERT(value != NULL, return;);
+ IRDA_ASSERT(value->len <= 1024, return;);
+
+ /* Initialize variables */
+ n = 0;
+
+ /*
+ * We must adjust the size of the response after the length of the
+ * value. We add 32 bytes because of the 6 bytes for the frame and
+ * max 5 bytes for the value coding.
+ */
+ tx_skb = alloc_skb(value->len + self->max_header_size + 32,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ /* Reserve space for MUX and LAP header */
+ skb_reserve(tx_skb, self->max_header_size);
+ skb_put(tx_skb, 6);
+
+ fp = tx_skb->data;
+
+ /* Build frame */
+ fp[n++] = GET_VALUE_BY_CLASS | IAP_LST;
+ fp[n++] = ret_code;
+
+ /* Insert list length (MSB first) */
+ tmp_be16 = htons(0x0001);
+ memcpy(fp+n, &tmp_be16, 2); n += 2;
+
+ /* Insert object identifier ( MSB first) */
+ tmp_be16 = cpu_to_be16(obj_id);
+ memcpy(fp+n, &tmp_be16, 2); n += 2;
+
+ switch (value->type) {
+ case IAS_STRING:
+ skb_put(tx_skb, 3 + value->len);
+ fp[n++] = value->type;
+ fp[n++] = 0; /* ASCII */
+ fp[n++] = (__u8) value->len;
+ memcpy(fp+n, value->t.string, value->len); n+=value->len;
+ break;
+ case IAS_INTEGER:
+ skb_put(tx_skb, 5);
+ fp[n++] = value->type;
+
+ tmp_be32 = cpu_to_be32(value->t.integer);
+ memcpy(fp+n, &tmp_be32, 4); n += 4;
+ break;
+ case IAS_OCT_SEQ:
+ skb_put(tx_skb, 3 + value->len);
+ fp[n++] = value->type;
+
+ tmp_be16 = cpu_to_be16(value->len);
+ memcpy(fp+n, &tmp_be16, 2); n += 2;
+ memcpy(fp+n, value->t.oct_seq, value->len); n+=value->len;
+ break;
+ case IAS_MISSING:
+ pr_debug("%s: sending IAS_MISSING\n", __func__);
+ skb_put(tx_skb, 1);
+ fp[n++] = value->type;
+ break;
+ default:
+ pr_debug("%s(), type not implemented!\n", __func__);
+ break;
+ }
+ iriap_do_r_connect_event(self, IAP_CALL_RESPONSE, tx_skb);
+
+ /* Drop reference count - see state_r_execute(). */
+ dev_kfree_skb(tx_skb);
+}
+
+/*
+ * Function iriap_getvaluebyclass_indication (self, skb)
+ *
+ * getvaluebyclass is requested from peer LM-IAS
+ *
+ */
+static void iriap_getvaluebyclass_indication(struct iriap_cb *self,
+ struct sk_buff *skb)
+{
+ struct ias_object *obj;
+ struct ias_attrib *attrib;
+ int name_len;
+ int attr_len;
+ char name[IAS_MAX_CLASSNAME + 1]; /* 60 bytes */
+ char attr[IAS_MAX_ATTRIBNAME + 1]; /* 60 bytes */
+ __u8 *fp;
+ int n;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ fp = skb->data;
+ n = 1;
+
+ name_len = fp[n++];
+
+ IRDA_ASSERT(name_len < IAS_MAX_CLASSNAME + 1, return;);
+
+ memcpy(name, fp+n, name_len); n+=name_len;
+ name[name_len] = '\0';
+
+ attr_len = fp[n++];
+
+ IRDA_ASSERT(attr_len < IAS_MAX_ATTRIBNAME + 1, return;);
+
+ memcpy(attr, fp+n, attr_len); n+=attr_len;
+ attr[attr_len] = '\0';
+
+ pr_debug("LM-IAS: Looking up %s: %s\n", name, attr);
+ obj = irias_find_object(name);
+
+ if (obj == NULL) {
+ pr_debug("LM-IAS: Object %s not found\n", name);
+ iriap_getvaluebyclass_response(self, 0x1235, IAS_CLASS_UNKNOWN,
+ &irias_missing);
+ return;
+ }
+ pr_debug("LM-IAS: found %s, id=%d\n", obj->name, obj->id);
+
+ attrib = irias_find_attrib(obj, attr);
+ if (attrib == NULL) {
+ pr_debug("LM-IAS: Attribute %s not found\n", attr);
+ iriap_getvaluebyclass_response(self, obj->id,
+ IAS_ATTRIB_UNKNOWN,
+ &irias_missing);
+ return;
+ }
+
+ /* We have a match; send the value. */
+ iriap_getvaluebyclass_response(self, obj->id, IAS_SUCCESS,
+ attrib->value);
+}
+
+/*
+ * Function iriap_send_ack (void)
+ *
+ * Currently not used
+ *
+ */
+void iriap_send_ack(struct iriap_cb *self)
+{
+ struct sk_buff *tx_skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ tx_skb = alloc_skb(LMP_MAX_HEADER + 1, GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ /* Reserve space for MUX and LAP header */
+ skb_reserve(tx_skb, self->max_header_size);
+ skb_put(tx_skb, 1);
+ frame = tx_skb->data;
+
+ /* Build frame */
+ frame[0] = IAP_LST | IAP_ACK | self->operation;
+
+ irlmp_data_request(self->lsap, tx_skb);
+}
+
+void iriap_connect_request(struct iriap_cb *self)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ ret = irlmp_connect_request(self->lsap, LSAP_IAS,
+ self->saddr, self->daddr,
+ NULL, NULL);
+ if (ret < 0) {
+ pr_debug("%s(), connect failed!\n", __func__);
+ self->confirm(IAS_DISCONNECT, 0, NULL, self->priv);
+ }
+}
+
+/*
+ * Function iriap_connect_confirm (handle, skb)
+ *
+ * LSAP connection confirmed!
+ *
+ */
+static void iriap_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_seg_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct iriap_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ self->max_data_size = max_seg_size;
+ self->max_header_size = max_header_size;
+
+ del_timer(&self->watchdog_timer);
+
+ iriap_do_client_event(self, IAP_LM_CONNECT_CONFIRM, skb);
+
+ /* Drop reference count - see state_s_make_call(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function iriap_connect_indication ( handle, skb)
+ *
+ * Remote LM-IAS is requesting connection
+ *
+ */
+static void iriap_connect_indication(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_seg_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct iriap_cb *self, *new;
+
+ self = instance;
+
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(self != NULL, goto out;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;);
+
+ /* Start new server */
+ new = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL);
+ if (!new) {
+ pr_debug("%s(), open failed\n", __func__);
+ goto out;
+ }
+
+ /* Now attach up the new "socket" */
+ new->lsap = irlmp_dup(self->lsap, new);
+ if (!new->lsap) {
+ pr_debug("%s(), dup failed!\n", __func__);
+ goto out;
+ }
+
+ new->max_data_size = max_seg_size;
+ new->max_header_size = max_header_size;
+
+ /* Clean up the original one to keep it in listen state */
+ irlmp_listen(self->lsap);
+
+ iriap_do_server_event(new, IAP_LM_CONNECT_INDICATION, skb);
+
+out:
+ /* Drop reference count - see state_r_disconnect(). */
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function iriap_data_indication (handle, skb)
+ *
+ * Receives data from connection identified by handle from IrLMP
+ *
+ */
+static int iriap_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct iriap_cb *self;
+ __u8 *frame;
+ __u8 opcode;
+
+ self = instance;
+
+ IRDA_ASSERT(skb != NULL, return 0;);
+ IRDA_ASSERT(self != NULL, goto out;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;);
+
+ frame = skb->data;
+
+ if (self->mode == IAS_SERVER) {
+ /* Call server */
+ pr_debug("%s(), Calling server!\n", __func__);
+ iriap_do_r_connect_event(self, IAP_RECV_F_LST, skb);
+ goto out;
+ }
+ opcode = frame[0];
+ if (~opcode & IAP_LST) {
+ net_warn_ratelimited("%s:, IrIAS multiframe commands or results is not implemented yet!\n",
+ __func__);
+ goto out;
+ }
+
+ /* Check for ack frames since they don't contain any data */
+ if (opcode & IAP_ACK) {
+ pr_debug("%s() Got ack frame!\n", __func__);
+ goto out;
+ }
+
+ opcode &= ~IAP_LST; /* Mask away LST bit */
+
+ switch (opcode) {
+ case GET_INFO_BASE:
+ pr_debug("IrLMP GetInfoBaseDetails not implemented!\n");
+ break;
+ case GET_VALUE_BY_CLASS:
+ iriap_do_call_event(self, IAP_RECV_F_LST, NULL);
+
+ switch (frame[1]) {
+ case IAS_SUCCESS:
+ iriap_getvaluebyclass_confirm(self, skb);
+ break;
+ case IAS_CLASS_UNKNOWN:
+ pr_debug("%s(), No such class!\n", __func__);
+ /* Finished, close connection! */
+ iriap_disconnect_request(self);
+
+ /*
+ * Warning, the client might close us, so remember
+ * no to use self anymore after calling confirm
+ */
+ if (self->confirm)
+ self->confirm(IAS_CLASS_UNKNOWN, 0, NULL,
+ self->priv);
+ break;
+ case IAS_ATTRIB_UNKNOWN:
+ pr_debug("%s(), No such attribute!\n", __func__);
+ /* Finished, close connection! */
+ iriap_disconnect_request(self);
+
+ /*
+ * Warning, the client might close us, so remember
+ * no to use self anymore after calling confirm
+ */
+ if (self->confirm)
+ self->confirm(IAS_ATTRIB_UNKNOWN, 0, NULL,
+ self->priv);
+ break;
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown op-code: %02x\n", __func__,
+ opcode);
+ break;
+ }
+
+out:
+ /* Cleanup - sub-calls will have done skb_get() as needed. */
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+/*
+ * Function iriap_call_indication (self, skb)
+ *
+ * Received call to server from peer LM-IAS
+ *
+ */
+void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb)
+{
+ __u8 *fp;
+ __u8 opcode;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ fp = skb->data;
+
+ opcode = fp[0];
+ if (~opcode & 0x80) {
+ net_warn_ratelimited("%s: IrIAS multiframe commands or results is not implemented yet!\n",
+ __func__);
+ return;
+ }
+ opcode &= 0x7f; /* Mask away LST bit */
+
+ switch (opcode) {
+ case GET_INFO_BASE:
+ net_warn_ratelimited("%s: GetInfoBaseDetails not implemented yet!\n",
+ __func__);
+ break;
+ case GET_VALUE_BY_CLASS:
+ iriap_getvaluebyclass_indication(self, skb);
+ break;
+ }
+ /* skb will be cleaned up in iriap_data_indication */
+}
+
+/*
+ * Function iriap_watchdog_timer_expired (data)
+ *
+ * Query has taken too long time, so abort
+ *
+ */
+static void iriap_watchdog_timer_expired(void *data)
+{
+ struct iriap_cb *self = (struct iriap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ /* iriap_close(self); */
+}
+
+#ifdef CONFIG_PROC_FS
+
+static const char *const ias_value_types[] = {
+ "IAS_MISSING",
+ "IAS_INTEGER",
+ "IAS_OCT_SEQ",
+ "IAS_STRING"
+};
+
+static inline struct ias_object *irias_seq_idx(loff_t pos)
+{
+ struct ias_object *obj;
+
+ for (obj = (struct ias_object *) hashbin_get_first(irias_objects);
+ obj; obj = (struct ias_object *) hashbin_get_next(irias_objects)) {
+ if (pos-- == 0)
+ break;
+ }
+
+ return obj;
+}
+
+static void *irias_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ spin_lock_irq(&irias_objects->hb_spinlock);
+
+ return *pos ? irias_seq_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *irias_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+
+ return (v == SEQ_START_TOKEN)
+ ? (void *) hashbin_get_first(irias_objects)
+ : (void *) hashbin_get_next(irias_objects);
+}
+
+static void irias_seq_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_irq(&irias_objects->hb_spinlock);
+}
+
+static int irias_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_puts(seq, "LM-IAS Objects:\n");
+ else {
+ struct ias_object *obj = v;
+ struct ias_attrib *attrib;
+
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -EINVAL;);
+
+ seq_printf(seq, "name: %s, id=%d\n",
+ obj->name, obj->id);
+
+ /* Careful for priority inversions here !
+ * All other uses of attrib spinlock are independent of
+ * the object spinlock, so we are safe. Jean II */
+ spin_lock(&obj->attribs->hb_spinlock);
+
+ /* List all attributes for this object */
+ for (attrib = (struct ias_attrib *) hashbin_get_first(obj->attribs);
+ attrib != NULL;
+ attrib = (struct ias_attrib *) hashbin_get_next(obj->attribs)) {
+
+ IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC,
+ goto outloop; );
+
+ seq_printf(seq, " - Attribute name: \"%s\", ",
+ attrib->name);
+ seq_printf(seq, "value[%s]: ",
+ ias_value_types[attrib->value->type]);
+
+ switch (attrib->value->type) {
+ case IAS_INTEGER:
+ seq_printf(seq, "%d\n",
+ attrib->value->t.integer);
+ break;
+ case IAS_STRING:
+ seq_printf(seq, "\"%s\"\n",
+ attrib->value->t.string);
+ break;
+ case IAS_OCT_SEQ:
+ seq_printf(seq, "octet sequence (%d bytes)\n",
+ attrib->value->len);
+ break;
+ case IAS_MISSING:
+ seq_puts(seq, "missing\n");
+ break;
+ default:
+ seq_printf(seq, "type %d?\n",
+ attrib->value->type);
+ }
+ seq_putc(seq, '\n');
+
+ }
+ IRDA_ASSERT_LABEL(outloop:)
+ spin_unlock(&obj->attribs->hb_spinlock);
+ }
+
+ return 0;
+}
+
+static const struct seq_operations irias_seq_ops = {
+ .start = irias_seq_start,
+ .next = irias_seq_next,
+ .stop = irias_seq_stop,
+ .show = irias_seq_show,
+};
+
+static int irias_seq_open(struct inode *inode, struct file *file)
+{
+ IRDA_ASSERT( irias_objects != NULL, return -EINVAL;);
+
+ return seq_open(file, &irias_seq_ops);
+}
+
+const struct file_operations irias_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = irias_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/iriap_event.c b/net/irda/iriap_event.c
new file mode 100644
index 000000000..e6098b2e0
--- /dev/null
+++ b/net/irda/iriap_event.c
@@ -0,0 +1,496 @@
+/*********************************************************************
+ *
+ * Filename: iriap_event.c
+ * Version: 0.1
+ * Description: IAP Finite State Machine
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Thu Aug 21 00:02:07 1997
+ * Modified at: Wed Mar 1 11:28:34 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1999-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/slab.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/iriap_event.h>
+
+static void state_s_disconnect (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_connecting (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_call (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+
+static void state_s_make_call (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_calling (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_outstanding (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_replying (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_s_wait_active (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+
+static void state_r_disconnect (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_call (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_waiting (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_wait_active (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_receiving (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_execute (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+static void state_r_returning (struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb);
+
+static void (*iriap_state[])(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb) = {
+ /* Client FSM */
+ state_s_disconnect,
+ state_s_connecting,
+ state_s_call,
+
+ /* S-Call FSM */
+ state_s_make_call,
+ state_s_calling,
+ state_s_outstanding,
+ state_s_replying,
+ state_s_wait_for_call,
+ state_s_wait_active,
+
+ /* Server FSM */
+ state_r_disconnect,
+ state_r_call,
+
+ /* R-Connect FSM */
+ state_r_waiting,
+ state_r_wait_active,
+ state_r_receiving,
+ state_r_execute,
+ state_r_returning,
+};
+
+void iriap_next_client_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ self->client_state = state;
+}
+
+void iriap_next_call_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ self->call_state = state;
+}
+
+void iriap_next_server_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ self->server_state = state;
+}
+
+void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ self->r_connect_state = state;
+}
+
+void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ (*iriap_state[ self->client_state]) (self, event, skb);
+}
+
+void iriap_do_call_event(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ (*iriap_state[ self->call_state]) (self, event, skb);
+}
+
+void iriap_do_server_event(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ (*iriap_state[ self->server_state]) (self, event, skb);
+}
+
+void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ (*iriap_state[ self->r_connect_state]) (self, event, skb);
+}
+
+
+/*
+ * Function state_s_disconnect (event, skb)
+ *
+ * S-Disconnect, The device has no LSAP connection to a particular
+ * remote device.
+ */
+static void state_s_disconnect(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ switch (event) {
+ case IAP_CALL_REQUEST_GVBC:
+ iriap_next_client_state(self, S_CONNECTING);
+ IRDA_ASSERT(self->request_skb == NULL, return;);
+ /* Don't forget to refcount it -
+ * see iriap_getvaluebyclass_request(). */
+ skb_get(skb);
+ self->request_skb = skb;
+ iriap_connect_request(self);
+ break;
+ case IAP_LM_DISCONNECT_INDICATION:
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__, event);
+ break;
+ }
+}
+
+/*
+ * Function state_s_connecting (self, event, skb)
+ *
+ * S-Connecting
+ *
+ */
+static void state_s_connecting(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ switch (event) {
+ case IAP_LM_CONNECT_CONFIRM:
+ /*
+ * Jump to S-Call FSM
+ */
+ iriap_do_call_event(self, IAP_CALL_REQUEST, skb);
+ /* iriap_call_request(self, 0,0,0); */
+ iriap_next_client_state(self, S_CALL);
+ break;
+ case IAP_LM_DISCONNECT_INDICATION:
+ /* Abort calls */
+ iriap_next_call_state(self, S_MAKE_CALL);
+ iriap_next_client_state(self, S_DISCONNECT);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__, event);
+ break;
+ }
+}
+
+/*
+ * Function state_s_call (self, event, skb)
+ *
+ * S-Call, The device can process calls to a specific remote
+ * device. Whenever the LSAP connection is disconnected, this state
+ * catches that event and clears up
+ */
+static void state_s_call(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+
+ switch (event) {
+ case IAP_LM_DISCONNECT_INDICATION:
+ /* Abort calls */
+ iriap_next_call_state(self, S_MAKE_CALL);
+ iriap_next_client_state(self, S_DISCONNECT);
+ break;
+ default:
+ pr_debug("state_s_call: Unknown event %d\n", event);
+ break;
+ }
+}
+
+/*
+ * Function state_s_make_call (event, skb)
+ *
+ * S-Make-Call
+ *
+ */
+static void state_s_make_call(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ switch (event) {
+ case IAP_CALL_REQUEST:
+ /* Already refcounted - see state_s_disconnect() */
+ tx_skb = self->request_skb;
+ self->request_skb = NULL;
+
+ irlmp_data_request(self->lsap, tx_skb);
+ iriap_next_call_state(self, S_OUTSTANDING);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__, event);
+ break;
+ }
+}
+
+/*
+ * Function state_s_calling (event, skb)
+ *
+ * S-Calling
+ *
+ */
+static void state_s_calling(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+/*
+ * Function state_s_outstanding (event, skb)
+ *
+ * S-Outstanding, The device is waiting for a response to a command
+ *
+ */
+static void state_s_outstanding(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+
+ switch (event) {
+ case IAP_RECV_F_LST:
+ /*iriap_send_ack(self);*/
+ /*LM_Idle_request(idle); */
+
+ iriap_next_call_state(self, S_WAIT_FOR_CALL);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__, event);
+ break;
+ }
+}
+
+/*
+ * Function state_s_replying (event, skb)
+ *
+ * S-Replying, The device is collecting a multiple part response
+ */
+static void state_s_replying(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+/*
+ * Function state_s_wait_for_call (event, skb)
+ *
+ * S-Wait-for-Call
+ *
+ */
+static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+
+/*
+ * Function state_s_wait_active (event, skb)
+ *
+ * S-Wait-Active
+ *
+ */
+static void state_s_wait_active(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+/**************************************************************************
+ *
+ * Server FSM
+ *
+ **************************************************************************/
+
+/*
+ * Function state_r_disconnect (self, event, skb)
+ *
+ * LM-IAS server is disconnected (not processing any requests!)
+ *
+ */
+static void state_r_disconnect(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+
+ switch (event) {
+ case IAP_LM_CONNECT_INDICATION:
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (tx_skb == NULL)
+ return;
+
+ /* Reserve space for MUX_CONTROL and LAP header */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+ irlmp_connect_response(self->lsap, tx_skb);
+ /*LM_Idle_request(idle); */
+
+ iriap_next_server_state(self, R_CALL);
+
+ /*
+ * Jump to R-Connect FSM, we skip R-Waiting since we do not
+ * care about LM_Idle_request()!
+ */
+ iriap_next_r_connect_state(self, R_RECEIVING);
+ break;
+ default:
+ pr_debug("%s(), unknown event %d\n", __func__, event);
+ break;
+ }
+}
+
+/*
+ * Function state_r_call (self, event, skb)
+ */
+static void state_r_call(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ switch (event) {
+ case IAP_LM_DISCONNECT_INDICATION:
+ /* Abort call */
+ iriap_next_server_state(self, R_DISCONNECT);
+ iriap_next_r_connect_state(self, R_WAITING);
+ break;
+ default:
+ pr_debug("%s(), unknown event!\n", __func__);
+ break;
+ }
+}
+
+/*
+ * R-Connect FSM
+ */
+
+/*
+ * Function state_r_waiting (self, event, skb)
+ */
+static void state_r_waiting(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+static void state_r_wait_active(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), Not implemented\n", __func__);
+}
+
+/*
+ * Function state_r_receiving (self, event, skb)
+ *
+ * We are receiving a command
+ *
+ */
+static void state_r_receiving(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ switch (event) {
+ case IAP_RECV_F_LST:
+ iriap_next_r_connect_state(self, R_EXECUTE);
+
+ iriap_call_indication(self, skb);
+ break;
+ default:
+ pr_debug("%s(), unknown event!\n", __func__);
+ break;
+ }
+}
+
+/*
+ * Function state_r_execute (self, event, skb)
+ *
+ * The server is processing the request
+ *
+ */
+static void state_r_execute(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+ switch (event) {
+ case IAP_CALL_RESPONSE:
+ /*
+ * Since we don't implement the Waiting state, we return
+ * to state Receiving instead, DB.
+ */
+ iriap_next_r_connect_state(self, R_RECEIVING);
+
+ /* Don't forget to refcount it - see
+ * iriap_getvaluebyclass_response(). */
+ skb_get(skb);
+
+ irlmp_data_request(self->lsap, skb);
+ break;
+ default:
+ pr_debug("%s(), unknown event!\n", __func__);
+ break;
+ }
+}
+
+static void state_r_returning(struct iriap_cb *self, IRIAP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), event=%d\n", __func__, event);
+
+ switch (event) {
+ case IAP_RECV_F_LST:
+ break;
+ default:
+ break;
+ }
+}
diff --git a/net/irda/irias_object.c b/net/irda/irias_object.c
new file mode 100644
index 000000000..53b86d0e1
--- /dev/null
+++ b/net/irda/irias_object.c
@@ -0,0 +1,555 @@
+/*********************************************************************
+ *
+ * Filename: irias_object.c
+ * Version: 0.3
+ * Description: IAS object database and functions
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Thu Oct 1 22:50:04 1998
+ * Modified at: Wed Dec 15 11:23:16 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/socket.h>
+#include <linux/module.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irias_object.h>
+
+hashbin_t *irias_objects;
+
+/*
+ * Used when a missing value needs to be returned
+ */
+struct ias_value irias_missing = { IAS_MISSING, 0, 0, 0, {0}};
+
+
+/*
+ * Function ias_new_object (name, id)
+ *
+ * Create a new IAS object
+ *
+ */
+struct ias_object *irias_new_object( char *name, int id)
+{
+ struct ias_object *obj;
+
+ obj = kzalloc(sizeof(struct ias_object), GFP_ATOMIC);
+ if (obj == NULL) {
+ net_warn_ratelimited("%s(), Unable to allocate object!\n",
+ __func__);
+ return NULL;
+ }
+
+ obj->magic = IAS_OBJECT_MAGIC;
+ obj->name = kstrndup(name, IAS_MAX_CLASSNAME, GFP_ATOMIC);
+ if (!obj->name) {
+ net_warn_ratelimited("%s(), Unable to allocate name!\n",
+ __func__);
+ kfree(obj);
+ return NULL;
+ }
+ obj->id = id;
+
+ /* Locking notes : the attrib spinlock has lower precendence
+ * than the objects spinlock. Never grap the objects spinlock
+ * while holding any attrib spinlock (risk of deadlock). Jean II */
+ obj->attribs = hashbin_new(HB_LOCK);
+
+ if (obj->attribs == NULL) {
+ net_warn_ratelimited("%s(), Unable to allocate attribs!\n",
+ __func__);
+ kfree(obj->name);
+ kfree(obj);
+ return NULL;
+ }
+
+ return obj;
+}
+EXPORT_SYMBOL(irias_new_object);
+
+/*
+ * Function irias_delete_attrib (attrib)
+ *
+ * Delete given attribute and deallocate all its memory
+ *
+ */
+static void __irias_delete_attrib(struct ias_attrib *attrib)
+{
+ IRDA_ASSERT(attrib != NULL, return;);
+ IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;);
+
+ kfree(attrib->name);
+
+ irias_delete_value(attrib->value);
+ attrib->magic = ~IAS_ATTRIB_MAGIC;
+
+ kfree(attrib);
+}
+
+void __irias_delete_object(struct ias_object *obj)
+{
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+ kfree(obj->name);
+
+ hashbin_delete(obj->attribs, (FREE_FUNC) __irias_delete_attrib);
+
+ obj->magic = ~IAS_OBJECT_MAGIC;
+
+ kfree(obj);
+}
+
+/*
+ * Function irias_delete_object (obj)
+ *
+ * Remove object from hashbin and deallocate all attributes associated with
+ * with this object and the object itself
+ *
+ */
+int irias_delete_object(struct ias_object *obj)
+{
+ struct ias_object *node;
+
+ IRDA_ASSERT(obj != NULL, return -1;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;);
+
+ /* Remove from list */
+ node = hashbin_remove_this(irias_objects, (irda_queue_t *) obj);
+ if (!node)
+ pr_debug("%s(), object already removed!\n",
+ __func__);
+
+ /* Destroy */
+ __irias_delete_object(obj);
+
+ return 0;
+}
+EXPORT_SYMBOL(irias_delete_object);
+
+/*
+ * Function irias_delete_attrib (obj)
+ *
+ * Remove attribute from hashbin and, if it was the last attribute of
+ * the object, remove the object as well.
+ *
+ */
+int irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+ int cleanobject)
+{
+ struct ias_attrib *node;
+
+ IRDA_ASSERT(obj != NULL, return -1;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;);
+ IRDA_ASSERT(attrib != NULL, return -1;);
+
+ /* Remove attribute from object */
+ node = hashbin_remove_this(obj->attribs, (irda_queue_t *) attrib);
+ if (!node)
+ return 0; /* Already removed or non-existent */
+
+ /* Deallocate attribute */
+ __irias_delete_attrib(node);
+
+ /* Check if object has still some attributes, destroy it if none.
+ * At first glance, this look dangerous, as the kernel reference
+ * various IAS objects. However, we only use this function on
+ * user attributes, not kernel attributes, so there is no risk
+ * of deleting a kernel object this way. Jean II */
+ node = (struct ias_attrib *) hashbin_get_first(obj->attribs);
+ if (cleanobject && !node)
+ irias_delete_object(obj);
+
+ return 0;
+}
+
+/*
+ * Function irias_insert_object (obj)
+ *
+ * Insert an object into the LM-IAS database
+ *
+ */
+void irias_insert_object(struct ias_object *obj)
+{
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+ hashbin_insert(irias_objects, (irda_queue_t *) obj, 0, obj->name);
+}
+EXPORT_SYMBOL(irias_insert_object);
+
+/*
+ * Function irias_find_object (name)
+ *
+ * Find object with given name
+ *
+ */
+struct ias_object *irias_find_object(char *name)
+{
+ IRDA_ASSERT(name != NULL, return NULL;);
+
+ /* Unsafe (locking), object might change */
+ return hashbin_lock_find(irias_objects, 0, name);
+}
+EXPORT_SYMBOL(irias_find_object);
+
+/*
+ * Function irias_find_attrib (obj, name)
+ *
+ * Find named attribute in object
+ *
+ */
+struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name)
+{
+ struct ias_attrib *attrib;
+
+ IRDA_ASSERT(obj != NULL, return NULL;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return NULL;);
+ IRDA_ASSERT(name != NULL, return NULL;);
+
+ attrib = hashbin_lock_find(obj->attribs, 0, name);
+ if (attrib == NULL)
+ return NULL;
+
+ /* Unsafe (locking), attrib might change */
+ return attrib;
+}
+
+/*
+ * Function irias_add_attribute (obj, attrib)
+ *
+ * Add attribute to object
+ *
+ */
+static void irias_add_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+ int owner)
+{
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+ IRDA_ASSERT(attrib != NULL, return;);
+ IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;);
+
+ /* Set if attrib is owned by kernel or user space */
+ attrib->value->owner = owner;
+
+ hashbin_insert(obj->attribs, (irda_queue_t *) attrib, 0, attrib->name);
+}
+
+/*
+ * Function irias_object_change_attribute (obj_name, attrib_name, new_value)
+ *
+ * Change the value of an objects attribute.
+ *
+ */
+int irias_object_change_attribute(char *obj_name, char *attrib_name,
+ struct ias_value *new_value)
+{
+ struct ias_object *obj;
+ struct ias_attrib *attrib;
+ unsigned long flags;
+
+ /* Find object */
+ obj = hashbin_lock_find(irias_objects, 0, obj_name);
+ if (obj == NULL) {
+ net_warn_ratelimited("%s: Unable to find object: %s\n",
+ __func__, obj_name);
+ return -1;
+ }
+
+ /* Slightly unsafe (obj might get removed under us) */
+ spin_lock_irqsave(&obj->attribs->hb_spinlock, flags);
+
+ /* Find attribute */
+ attrib = hashbin_find(obj->attribs, 0, attrib_name);
+ if (attrib == NULL) {
+ net_warn_ratelimited("%s: Unable to find attribute: %s\n",
+ __func__, attrib_name);
+ spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+ return -1;
+ }
+
+ if ( attrib->value->type != new_value->type) {
+ pr_debug("%s(), changing value type not allowed!\n",
+ __func__);
+ spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+ return -1;
+ }
+
+ /* Delete old value */
+ irias_delete_value(attrib->value);
+
+ /* Insert new value */
+ attrib->value = new_value;
+
+ /* Success */
+ spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(irias_object_change_attribute);
+
+/*
+ * Function irias_object_add_integer_attrib (obj, name, value)
+ *
+ * Add an integer attribute to an LM-IAS object
+ *
+ */
+void irias_add_integer_attrib(struct ias_object *obj, char *name, int value,
+ int owner)
+{
+ struct ias_attrib *attrib;
+
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+ IRDA_ASSERT(name != NULL, return;);
+
+ attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC);
+ if (attrib == NULL) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ return;
+ }
+
+ attrib->magic = IAS_ATTRIB_MAGIC;
+ attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
+
+ /* Insert value */
+ attrib->value = irias_new_integer_value(value);
+ if (!attrib->name || !attrib->value) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ if (attrib->value)
+ irias_delete_value(attrib->value);
+ kfree(attrib->name);
+ kfree(attrib);
+ return;
+ }
+
+ irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_integer_attrib);
+
+ /*
+ * Function irias_add_octseq_attrib (obj, name, octet_seq, len)
+ *
+ * Add a octet sequence attribute to an LM-IAS object
+ *
+ */
+
+void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets,
+ int len, int owner)
+{
+ struct ias_attrib *attrib;
+
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+ IRDA_ASSERT(name != NULL, return;);
+ IRDA_ASSERT(octets != NULL, return;);
+
+ attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC);
+ if (attrib == NULL) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ return;
+ }
+
+ attrib->magic = IAS_ATTRIB_MAGIC;
+ attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
+
+ attrib->value = irias_new_octseq_value( octets, len);
+ if (!attrib->name || !attrib->value) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ if (attrib->value)
+ irias_delete_value(attrib->value);
+ kfree(attrib->name);
+ kfree(attrib);
+ return;
+ }
+
+ irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_octseq_attrib);
+
+/*
+ * Function irias_object_add_string_attrib (obj, string)
+ *
+ * Add a string attribute to an LM-IAS object
+ *
+ */
+void irias_add_string_attrib(struct ias_object *obj, char *name, char *value,
+ int owner)
+{
+ struct ias_attrib *attrib;
+
+ IRDA_ASSERT(obj != NULL, return;);
+ IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+ IRDA_ASSERT(name != NULL, return;);
+ IRDA_ASSERT(value != NULL, return;);
+
+ attrib = kzalloc(sizeof( struct ias_attrib), GFP_ATOMIC);
+ if (attrib == NULL) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ return;
+ }
+
+ attrib->magic = IAS_ATTRIB_MAGIC;
+ attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC);
+
+ attrib->value = irias_new_string_value(value);
+ if (!attrib->name || !attrib->value) {
+ net_warn_ratelimited("%s: Unable to allocate attribute!\n",
+ __func__);
+ if (attrib->value)
+ irias_delete_value(attrib->value);
+ kfree(attrib->name);
+ kfree(attrib);
+ return;
+ }
+
+ irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_string_attrib);
+
+/*
+ * Function irias_new_integer_value (integer)
+ *
+ * Create new IAS integer value
+ *
+ */
+struct ias_value *irias_new_integer_value(int integer)
+{
+ struct ias_value *value;
+
+ value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC);
+ if (value == NULL)
+ return NULL;
+
+ value->type = IAS_INTEGER;
+ value->len = 4;
+ value->t.integer = integer;
+
+ return value;
+}
+EXPORT_SYMBOL(irias_new_integer_value);
+
+/*
+ * Function irias_new_string_value (string)
+ *
+ * Create new IAS string value
+ *
+ * Per IrLMP 1.1, 4.3.3.2, strings are up to 256 chars - Jean II
+ */
+struct ias_value *irias_new_string_value(char *string)
+{
+ struct ias_value *value;
+
+ value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC);
+ if (value == NULL)
+ return NULL;
+
+ value->type = IAS_STRING;
+ value->charset = CS_ASCII;
+ value->t.string = kstrndup(string, IAS_MAX_STRING, GFP_ATOMIC);
+ if (!value->t.string) {
+ net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__);
+ kfree(value);
+ return NULL;
+ }
+
+ value->len = strlen(value->t.string);
+
+ return value;
+}
+
+/*
+ * Function irias_new_octseq_value (octets, len)
+ *
+ * Create new IAS octet-sequence value
+ *
+ * Per IrLMP 1.1, 4.3.3.2, octet-sequence are up to 1024 bytes - Jean II
+ */
+struct ias_value *irias_new_octseq_value(__u8 *octseq , int len)
+{
+ struct ias_value *value;
+
+ value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC);
+ if (value == NULL)
+ return NULL;
+
+ value->type = IAS_OCT_SEQ;
+ /* Check length */
+ if(len > IAS_MAX_OCTET_STRING)
+ len = IAS_MAX_OCTET_STRING;
+ value->len = len;
+
+ value->t.oct_seq = kmemdup(octseq, len, GFP_ATOMIC);
+ if (value->t.oct_seq == NULL){
+ net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__);
+ kfree(value);
+ return NULL;
+ }
+ return value;
+}
+
+struct ias_value *irias_new_missing_value(void)
+{
+ struct ias_value *value;
+
+ value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC);
+ if (value == NULL)
+ return NULL;
+
+ value->type = IAS_MISSING;
+
+ return value;
+}
+
+/*
+ * Function irias_delete_value (value)
+ *
+ * Delete IAS value
+ *
+ */
+void irias_delete_value(struct ias_value *value)
+{
+ IRDA_ASSERT(value != NULL, return;);
+
+ switch (value->type) {
+ case IAS_INTEGER: /* Fallthrough */
+ case IAS_MISSING:
+ /* No need to deallocate */
+ break;
+ case IAS_STRING:
+ /* Deallocate string */
+ kfree(value->t.string);
+ break;
+ case IAS_OCT_SEQ:
+ /* Deallocate byte stream */
+ kfree(value->t.oct_seq);
+ break;
+ default:
+ pr_debug("%s(), Unknown value type!\n", __func__);
+ break;
+ }
+ kfree(value);
+}
+EXPORT_SYMBOL(irias_delete_value);
diff --git a/net/irda/irlan/Kconfig b/net/irda/irlan/Kconfig
new file mode 100644
index 000000000..951abc2e3
--- /dev/null
+++ b/net/irda/irlan/Kconfig
@@ -0,0 +1,14 @@
+config IRLAN
+ tristate "IrLAN protocol"
+ depends on IRDA
+ help
+ Say Y here if you want to build support for the IrLAN protocol.
+ To compile it as a module, choose M here: the module will be called
+ irlan. IrLAN emulates an Ethernet and makes it possible to put up
+ a wireless LAN using infrared beams.
+
+ The IrLAN protocol can be used to talk with infrared access points
+ like the HP NetbeamIR, or the ESI JetEye NET. You can also connect
+ to another Linux machine running the IrLAN protocol for ad-hoc
+ networking!
+
diff --git a/net/irda/irlan/Makefile b/net/irda/irlan/Makefile
new file mode 100644
index 000000000..94eefbc8e
--- /dev/null
+++ b/net/irda/irlan/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux IrDA IrLAN protocol layer.
+#
+
+obj-$(CONFIG_IRLAN) += irlan.o
+
+irlan-y := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
diff --git a/net/irda/irlan/irlan_client.c b/net/irda/irlan/irlan_client.c
new file mode 100644
index 000000000..c5837a40c
--- /dev/null
+++ b/net/irda/irlan/irlan_client.c
@@ -0,0 +1,559 @@
+/*********************************************************************
+ *
+ * Filename: irlan_client.c
+ * Version: 0.9
+ * Description: IrDA LAN Access Protocol (IrLAN) Client
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:37 1997
+ * Modified at: Tue Dec 14 15:47:02 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
+ * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <linux/bitops.h>
+#include <net/arp.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_client.h>
+
+#undef CONFIG_IRLAN_GRATUITOUS_ARP
+
+static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *);
+static int irlan_client_ctrl_data_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static void irlan_client_ctrl_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *);
+static void irlan_check_response_param(struct irlan_cb *self, char *param,
+ char *value, int val_len);
+static void irlan_client_open_ctrl_tsap(struct irlan_cb *self);
+
+static void irlan_client_kick_timer_expired(void *data)
+{
+ struct irlan_cb *self = (struct irlan_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /*
+ * If we are in peer mode, the client may not have got the discovery
+ * indication it needs to make progress. If the client is still in
+ * IDLE state, we must kick it to, but only if the provider is not IDLE
+ */
+ if ((self->provider.access_type == ACCESS_PEER) &&
+ (self->client.state == IRLAN_IDLE) &&
+ (self->provider.state != IRLAN_IDLE)) {
+ irlan_client_wakeup(self, self->saddr, self->daddr);
+ }
+}
+
+static void irlan_client_start_kick_timer(struct irlan_cb *self, int timeout)
+{
+ irda_start_timer(&self->client.kick_timer, timeout, (void *) self,
+ irlan_client_kick_timer_expired);
+}
+
+/*
+ * Function irlan_client_wakeup (self, saddr, daddr)
+ *
+ * Wake up client
+ *
+ */
+void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /*
+ * Check if we are already awake, or if we are a provider in direct
+ * mode (in that case we must leave the client idle
+ */
+ if ((self->client.state != IRLAN_IDLE) ||
+ (self->provider.access_type == ACCESS_DIRECT))
+ {
+ pr_debug("%s(), already awake!\n", __func__);
+ return;
+ }
+
+ /* Addresses may have changed! */
+ self->saddr = saddr;
+ self->daddr = daddr;
+
+ if (self->disconnect_reason == LM_USER_REQUEST) {
+ pr_debug("%s(), still stopped by user\n", __func__);
+ return;
+ }
+
+ /* Open TSAPs */
+ irlan_client_open_ctrl_tsap(self);
+ irlan_open_data_tsap(self);
+
+ irlan_do_client_event(self, IRLAN_DISCOVERY_INDICATION, NULL);
+
+ /* Start kick timer */
+ irlan_client_start_kick_timer(self, 2*HZ);
+}
+
+/*
+ * Function irlan_discovery_indication (daddr)
+ *
+ * Remote device with IrLAN server support discovered
+ *
+ */
+void irlan_client_discovery_indication(discinfo_t *discovery,
+ DISCOVERY_MODE mode,
+ void *priv)
+{
+ struct irlan_cb *self;
+ __u32 saddr, daddr;
+
+ IRDA_ASSERT(discovery != NULL, return;);
+
+ /*
+ * I didn't check it, but I bet that IrLAN suffer from the same
+ * deficiency as IrComm and doesn't handle two instances
+ * simultaneously connecting to each other.
+ * Same workaround, drop passive discoveries.
+ * Jean II */
+ if(mode == DISCOVERY_PASSIVE)
+ return;
+
+ saddr = discovery->saddr;
+ daddr = discovery->daddr;
+
+ /* Find instance */
+ rcu_read_lock();
+ self = irlan_get_any();
+ if (self) {
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, goto out;);
+
+ pr_debug("%s(), Found instance (%08x)!\n", __func__ ,
+ daddr);
+
+ irlan_client_wakeup(self, saddr, daddr);
+ }
+IRDA_ASSERT_LABEL(out:)
+ rcu_read_unlock();
+}
+
+/*
+ * Function irlan_client_data_indication (handle, skb)
+ *
+ * This function gets the data that is received on the control channel
+ *
+ */
+static int irlan_client_ctrl_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ irlan_do_client_event(self, IRLAN_DATA_INDICATION, skb);
+
+ /* Ready for a new command */
+ pr_debug("%s(), clearing tx_busy\n", __func__);
+ self->client.tx_busy = FALSE;
+
+ /* Check if we have some queued commands waiting to be sent */
+ irlan_run_ctrl_tx_queue(self);
+
+ return 0;
+}
+
+static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *userdata)
+{
+ struct irlan_cb *self;
+ struct tsap_cb *tsap;
+ struct sk_buff *skb;
+
+ pr_debug("%s(), reason=%d\n", __func__ , reason);
+
+ self = instance;
+ tsap = sap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+ IRDA_ASSERT(tsap != NULL, return;);
+ IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+
+ IRDA_ASSERT(tsap == self->client.tsap_ctrl, return;);
+
+ /* Remove frames queued on the control channel */
+ while ((skb = skb_dequeue(&self->client.txq)) != NULL) {
+ dev_kfree_skb(skb);
+ }
+ self->client.tx_busy = FALSE;
+
+ irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+}
+
+/*
+ * Function irlan_client_open_tsaps (self)
+ *
+ * Initialize callbacks and open IrTTP TSAPs
+ *
+ */
+static void irlan_client_open_ctrl_tsap(struct irlan_cb *self)
+{
+ struct tsap_cb *tsap;
+ notify_t notify;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Check if already open */
+ if (self->client.tsap_ctrl)
+ return;
+
+ irda_notify_init(&notify);
+
+ /* Set up callbacks */
+ notify.data_indication = irlan_client_ctrl_data_indication;
+ notify.connect_confirm = irlan_client_ctrl_connect_confirm;
+ notify.disconnect_indication = irlan_client_ctrl_disconnect_indication;
+ notify.instance = self;
+ strlcpy(notify.name, "IrLAN ctrl (c)", sizeof(notify.name));
+
+ tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, &notify);
+ if (!tsap) {
+ pr_debug("%s(), Got no tsap!\n", __func__);
+ return;
+ }
+ self->client.tsap_ctrl = tsap;
+}
+
+/*
+ * Function irlan_client_connect_confirm (handle, skb)
+ *
+ * Connection to peer IrLAN laye confirmed
+ *
+ */
+static void irlan_client_ctrl_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ self->client.max_sdu_size = max_sdu_size;
+ self->client.max_header_size = max_header_size;
+
+ /* TODO: we could set the MTU depending on the max_sdu_size */
+
+ irlan_do_client_event(self, IRLAN_CONNECT_COMPLETE, NULL);
+}
+
+/*
+ * Function print_ret_code (code)
+ *
+ * Print return code of request to peer IrLAN layer.
+ *
+ */
+static void print_ret_code(__u8 code)
+{
+ switch(code) {
+ case 0:
+ printk(KERN_INFO "Success\n");
+ break;
+ case 1:
+ net_warn_ratelimited("IrLAN: Insufficient resources\n");
+ break;
+ case 2:
+ net_warn_ratelimited("IrLAN: Invalid command format\n");
+ break;
+ case 3:
+ net_warn_ratelimited("IrLAN: Command not supported\n");
+ break;
+ case 4:
+ net_warn_ratelimited("IrLAN: Parameter not supported\n");
+ break;
+ case 5:
+ net_warn_ratelimited("IrLAN: Value not supported\n");
+ break;
+ case 6:
+ net_warn_ratelimited("IrLAN: Not open\n");
+ break;
+ case 7:
+ net_warn_ratelimited("IrLAN: Authentication required\n");
+ break;
+ case 8:
+ net_warn_ratelimited("IrLAN: Invalid password\n");
+ break;
+ case 9:
+ net_warn_ratelimited("IrLAN: Protocol error\n");
+ break;
+ case 255:
+ net_warn_ratelimited("IrLAN: Asynchronous status\n");
+ break;
+ }
+}
+
+/*
+ * Function irlan_client_parse_response (self, skb)
+ *
+ * Extract all parameters from received buffer, then feed them to
+ * check_params for parsing
+ */
+void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb)
+{
+ __u8 *frame;
+ __u8 *ptr;
+ int count;
+ int ret;
+ __u16 val_len;
+ int i;
+ char *name;
+ char *value;
+
+ IRDA_ASSERT(skb != NULL, return;);
+
+ pr_debug("%s() skb->len=%d\n", __func__ , (int)skb->len);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ if (!skb) {
+ net_err_ratelimited("%s(), Got NULL skb!\n", __func__);
+ return;
+ }
+ frame = skb->data;
+
+ /*
+ * Check return code and print it if not success
+ */
+ if (frame[0]) {
+ print_ret_code(frame[0]);
+ return;
+ }
+
+ name = kmalloc(255, GFP_ATOMIC);
+ if (!name)
+ return;
+ value = kmalloc(1016, GFP_ATOMIC);
+ if (!value) {
+ kfree(name);
+ return;
+ }
+
+ /* How many parameters? */
+ count = frame[1];
+
+ pr_debug("%s(), got %d parameters\n", __func__ , count);
+
+ ptr = frame+2;
+
+ /* For all parameters */
+ for (i=0; i<count;i++) {
+ ret = irlan_extract_param(ptr, name, value, &val_len);
+ if (ret < 0) {
+ pr_debug("%s(), IrLAN, Error!\n", __func__);
+ break;
+ }
+ ptr += ret;
+ irlan_check_response_param(self, name, value, val_len);
+ }
+ /* Cleanup */
+ kfree(name);
+ kfree(value);
+}
+
+/*
+ * Function irlan_check_response_param (self, param, value, val_len)
+ *
+ * Check which parameter is received and update local variables
+ *
+ */
+static void irlan_check_response_param(struct irlan_cb *self, char *param,
+ char *value, int val_len)
+{
+ __u16 tmp_cpu; /* Temporary value in host order */
+ __u8 *bytes;
+ int i;
+
+ pr_debug("%s(), parm=%s\n", __func__ , param);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Media type */
+ if (strcmp(param, "MEDIA") == 0) {
+ if (strcmp(value, "802.3") == 0)
+ self->media = MEDIA_802_3;
+ else
+ self->media = MEDIA_802_5;
+ return;
+ }
+ if (strcmp(param, "FILTER_TYPE") == 0) {
+ if (strcmp(value, "DIRECTED") == 0)
+ self->client.filter_type |= IRLAN_DIRECTED;
+ else if (strcmp(value, "FUNCTIONAL") == 0)
+ self->client.filter_type |= IRLAN_FUNCTIONAL;
+ else if (strcmp(value, "GROUP") == 0)
+ self->client.filter_type |= IRLAN_GROUP;
+ else if (strcmp(value, "MAC_FRAME") == 0)
+ self->client.filter_type |= IRLAN_MAC_FRAME;
+ else if (strcmp(value, "MULTICAST") == 0)
+ self->client.filter_type |= IRLAN_MULTICAST;
+ else if (strcmp(value, "BROADCAST") == 0)
+ self->client.filter_type |= IRLAN_BROADCAST;
+ else if (strcmp(value, "IPX_SOCKET") == 0)
+ self->client.filter_type |= IRLAN_IPX_SOCKET;
+
+ }
+ if (strcmp(param, "ACCESS_TYPE") == 0) {
+ if (strcmp(value, "DIRECT") == 0)
+ self->client.access_type = ACCESS_DIRECT;
+ else if (strcmp(value, "PEER") == 0)
+ self->client.access_type = ACCESS_PEER;
+ else if (strcmp(value, "HOSTED") == 0)
+ self->client.access_type = ACCESS_HOSTED;
+ else {
+ pr_debug("%s(), unknown access type!\n", __func__);
+ }
+ }
+ /* IRLAN version */
+ if (strcmp(param, "IRLAN_VER") == 0) {
+ pr_debug("IrLAN version %d.%d\n", (__u8)value[0],
+ (__u8)value[1]);
+
+ self->version[0] = value[0];
+ self->version[1] = value[1];
+ return;
+ }
+ /* Which remote TSAP to use for data channel */
+ if (strcmp(param, "DATA_CHAN") == 0) {
+ self->dtsap_sel_data = value[0];
+ pr_debug("Data TSAP = %02x\n", self->dtsap_sel_data);
+ return;
+ }
+ if (strcmp(param, "CON_ARB") == 0) {
+ memcpy(&tmp_cpu, value, 2); /* Align value */
+ le16_to_cpus(&tmp_cpu); /* Convert to host order */
+ self->client.recv_arb_val = tmp_cpu;
+ pr_debug("%s(), receive arb val=%d\n", __func__ ,
+ self->client.recv_arb_val);
+ }
+ if (strcmp(param, "MAX_FRAME") == 0) {
+ memcpy(&tmp_cpu, value, 2); /* Align value */
+ le16_to_cpus(&tmp_cpu); /* Convert to host order */
+ self->client.max_frame = tmp_cpu;
+ pr_debug("%s(), max frame=%d\n", __func__ ,
+ self->client.max_frame);
+ }
+
+ /* RECONNECT_KEY, in case the link goes down! */
+ if (strcmp(param, "RECONNECT_KEY") == 0) {
+ pr_debug("Got reconnect key: ");
+ /* for (i = 0; i < val_len; i++) */
+/* printk("%02x", value[i]); */
+ memcpy(self->client.reconnect_key, value, val_len);
+ self->client.key_len = val_len;
+ pr_debug("\n");
+ }
+ /* FILTER_ENTRY, have we got an ethernet address? */
+ if (strcmp(param, "FILTER_ENTRY") == 0) {
+ bytes = value;
+ pr_debug("Ethernet address = %pM\n", bytes);
+ for (i = 0; i < 6; i++)
+ self->dev->dev_addr[i] = bytes[i];
+ }
+}
+
+/*
+ * Function irlan_client_get_value_confirm (obj_id, value)
+ *
+ * Got results from remote LM-IAS
+ *
+ */
+void irlan_client_get_value_confirm(int result, __u16 obj_id,
+ struct ias_value *value, void *priv)
+{
+ struct irlan_cb *self;
+
+ IRDA_ASSERT(priv != NULL, return;);
+
+ self = priv;
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* We probably don't need to make any more queries */
+ iriap_close(self->client.iriap);
+ self->client.iriap = NULL;
+
+ /* Check if request succeeded */
+ if (result != IAS_SUCCESS) {
+ pr_debug("%s(), got NULL value!\n", __func__);
+ irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL,
+ NULL);
+ return;
+ }
+
+ switch (value->type) {
+ case IAS_INTEGER:
+ self->dtsap_sel_ctrl = value->t.integer;
+
+ if (value->t.integer != -1) {
+ irlan_do_client_event(self, IRLAN_IAS_PROVIDER_AVAIL,
+ NULL);
+ return;
+ }
+ irias_delete_value(value);
+ break;
+ default:
+ pr_debug("%s(), unknown type!\n", __func__);
+ break;
+ }
+ irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, NULL);
+}
diff --git a/net/irda/irlan/irlan_client_event.c b/net/irda/irlan/irlan_client_event.c
new file mode 100644
index 000000000..cc93fabbb
--- /dev/null
+++ b/net/irda/irlan/irlan_client_event.c
@@ -0,0 +1,511 @@
+/*********************************************************************
+ *
+ * Filename: irlan_client_event.c
+ * Version: 0.9
+ * Description: IrLAN client state machine
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:37 1997
+ * Modified at: Sun Dec 26 21:52:24 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/irmod.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_event.h>
+
+static int irlan_client_state_idle (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_conn (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_info (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_open (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_wait (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_arb (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_data (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_client_state_sync (struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+
+static int (*state[])(struct irlan_cb *, IRLAN_EVENT event, struct sk_buff *) =
+{
+ irlan_client_state_idle,
+ irlan_client_state_query,
+ irlan_client_state_conn,
+ irlan_client_state_info,
+ irlan_client_state_media,
+ irlan_client_state_open,
+ irlan_client_state_wait,
+ irlan_client_state_arb,
+ irlan_client_state_data,
+ irlan_client_state_close,
+ irlan_client_state_sync
+};
+
+void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ (*state[ self->client.state]) (self, event, skb);
+}
+
+/*
+ * Function irlan_client_state_idle (event, skb, info)
+ *
+ * IDLE, We are waiting for an indication that there is a provider
+ * available.
+ */
+static int irlan_client_state_idle(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ switch (event) {
+ case IRLAN_DISCOVERY_INDICATION:
+ if (self->client.iriap) {
+ net_warn_ratelimited("%s(), busy with a previous query\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ self->client.iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ irlan_client_get_value_confirm);
+ /* Get some values from peer IAS */
+ irlan_next_client_state(self, IRLAN_QUERY);
+ iriap_getvaluebyclass_request(self->client.iriap,
+ self->saddr, self->daddr,
+ "IrLAN", "IrDA:TinyTP:LsapSel");
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_query (event, skb, info)
+ *
+ * QUERY, We have queryed the remote IAS and is ready to connect
+ * to provider, just waiting for the confirm.
+ *
+ */
+static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ switch(event) {
+ case IRLAN_IAS_PROVIDER_AVAIL:
+ IRDA_ASSERT(self->dtsap_sel_ctrl != 0, return -1;);
+
+ self->client.open_retries = 0;
+
+ irttp_connect_request(self->client.tsap_ctrl,
+ self->dtsap_sel_ctrl,
+ self->saddr, self->daddr, NULL,
+ IRLAN_MTU, NULL);
+ irlan_next_client_state(self, IRLAN_CONN);
+ break;
+ case IRLAN_IAS_PROVIDER_NOT_AVAIL:
+ pr_debug("%s(), IAS_PROVIDER_NOT_AVAIL\n", __func__);
+ irlan_next_client_state(self, IRLAN_IDLE);
+
+ /* Give the client a kick! */
+ if ((self->provider.access_type == ACCESS_PEER) &&
+ (self->provider.state != IRLAN_IDLE))
+ irlan_client_wakeup(self, self->saddr, self->daddr);
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_conn (event, skb, info)
+ *
+ * CONN, We have connected to a provider but has not issued any
+ * commands yet.
+ *
+ */
+static int irlan_client_state_conn(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch (event) {
+ case IRLAN_CONNECT_COMPLETE:
+ /* Send getinfo cmd */
+ irlan_get_provider_info(self);
+ irlan_next_client_state(self, IRLAN_INFO);
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_info (self, event, skb, info)
+ *
+ * INFO, We have issued a GetInfo command and is awaiting a reply.
+ */
+static int irlan_client_state_info(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch (event) {
+ case IRLAN_DATA_INDICATION:
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ irlan_client_parse_response(self, skb);
+
+ irlan_next_client_state(self, IRLAN_MEDIA);
+
+ irlan_get_media_char(self);
+ break;
+
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_media (self, event, skb, info)
+ *
+ * MEDIA, The irlan_client has issued a GetMedia command and is awaiting a
+ * reply.
+ *
+ */
+static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_DATA_INDICATION:
+ irlan_client_parse_response(self, skb);
+ irlan_open_data_channel(self);
+ irlan_next_client_state(self, IRLAN_OPEN);
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_open (self, event, skb, info)
+ *
+ * OPEN, The irlan_client has issued a OpenData command and is awaiting a
+ * reply
+ *
+ */
+static int irlan_client_state_open(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ struct qos_info qos;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_DATA_INDICATION:
+ irlan_client_parse_response(self, skb);
+
+ /*
+ * Check if we have got the remote TSAP for data
+ * communications
+ */
+ IRDA_ASSERT(self->dtsap_sel_data != 0, return -1;);
+
+ /* Check which access type we are dealing with */
+ switch (self->client.access_type) {
+ case ACCESS_PEER:
+ if (self->provider.state == IRLAN_OPEN) {
+
+ irlan_next_client_state(self, IRLAN_ARB);
+ irlan_do_client_event(self, IRLAN_CHECK_CON_ARB,
+ NULL);
+ } else {
+
+ irlan_next_client_state(self, IRLAN_WAIT);
+ }
+ break;
+ case ACCESS_DIRECT:
+ case ACCESS_HOSTED:
+ qos.link_disc_time.bits = 0x01; /* 3 secs */
+
+ irttp_connect_request(self->tsap_data,
+ self->dtsap_sel_data,
+ self->saddr, self->daddr, &qos,
+ IRLAN_MTU, NULL);
+
+ irlan_next_client_state(self, IRLAN_DATA);
+ break;
+ default:
+ pr_debug("%s(), unknown access type!\n", __func__);
+ break;
+ }
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_wait (self, event, skb, info)
+ *
+ * WAIT, The irlan_client is waiting for the local provider to enter the
+ * provider OPEN state.
+ *
+ */
+static int irlan_client_state_wait(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_PROVIDER_SIGNAL:
+ irlan_next_client_state(self, IRLAN_ARB);
+ irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, NULL);
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static int irlan_client_state_arb(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ struct qos_info qos;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_CHECK_CON_ARB:
+ if (self->client.recv_arb_val == self->provider.send_arb_val) {
+ irlan_next_client_state(self, IRLAN_CLOSE);
+ irlan_close_data_channel(self);
+ } else if (self->client.recv_arb_val <
+ self->provider.send_arb_val)
+ {
+ qos.link_disc_time.bits = 0x01; /* 3 secs */
+
+ irlan_next_client_state(self, IRLAN_DATA);
+ irttp_connect_request(self->tsap_data,
+ self->dtsap_sel_data,
+ self->saddr, self->daddr, &qos,
+ IRLAN_MTU, NULL);
+ } else if (self->client.recv_arb_val >
+ self->provider.send_arb_val)
+ {
+ pr_debug("%s(), lost the battle :-(\n", __func__);
+ }
+ break;
+ case IRLAN_DATA_CONNECT_INDICATION:
+ irlan_next_client_state(self, IRLAN_DATA);
+ break;
+ case IRLAN_LMP_DISCONNECT:
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ case IRLAN_WATCHDOG_TIMEOUT:
+ pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_data (self, event, skb, info)
+ *
+ * DATA, The data channel is connected, allowing data transfers between
+ * the local and remote machines.
+ *
+ */
+static int irlan_client_state_data(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ switch(event) {
+ case IRLAN_DATA_INDICATION:
+ irlan_client_parse_response(self, skb);
+ break;
+ case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_client_state(self, IRLAN_IDLE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_close (self, event, skb, info)
+ *
+ *
+ *
+ */
+static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_client_state_sync (self, event, skb, info)
+ *
+ *
+ *
+ */
+static int irlan_client_state_sync(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c
new file mode 100644
index 000000000..481bbc2a4
--- /dev/null
+++ b/net/irda/irlan/irlan_common.c
@@ -0,0 +1,1176 @@
+/*********************************************************************
+ *
+ * Filename: irlan_common.c
+ * Version: 0.9
+ * Description: IrDA LAN Access Protocol Implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:37 1997
+ * Modified at: Sun Dec 26 21:53:10 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/random.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/moduleparam.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_filter.h>
+
+
+/* extern char sysctl_devname[]; */
+
+/*
+ * Master structure
+ */
+static LIST_HEAD(irlans);
+
+static void *ckey;
+static void *skey;
+
+/* Module parameters */
+static bool eth; /* Use "eth" or "irlan" name for devices */
+static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */
+
+#ifdef CONFIG_PROC_FS
+static const char *const irlan_access[] = {
+ "UNKNOWN",
+ "DIRECT",
+ "PEER",
+ "HOSTED"
+};
+
+static const char *const irlan_media[] = {
+ "UNKNOWN",
+ "802.3",
+ "802.5"
+};
+
+extern struct proc_dir_entry *proc_irda;
+
+static int irlan_seq_open(struct inode *inode, struct file *file);
+
+static const struct file_operations irlan_fops = {
+ .owner = THIS_MODULE,
+ .open = irlan_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+extern struct proc_dir_entry *proc_irda;
+#endif /* CONFIG_PROC_FS */
+
+static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr);
+static void __irlan_close(struct irlan_cb *self);
+static int __irlan_insert_param(struct sk_buff *skb, char *param, int type,
+ __u8 value_byte, __u16 value_short,
+ __u8 *value_array, __u16 value_len);
+static void irlan_open_unicast_addr(struct irlan_cb *self);
+static void irlan_get_unicast_addr(struct irlan_cb *self);
+void irlan_close_tsaps(struct irlan_cb *self);
+
+/*
+ * Function irlan_init (void)
+ *
+ * Initialize IrLAN layer
+ *
+ */
+static int __init irlan_init(void)
+{
+ struct irlan_cb *new;
+ __u16 hints;
+
+#ifdef CONFIG_PROC_FS
+ { struct proc_dir_entry *proc;
+ proc = proc_create("irlan", 0, proc_irda, &irlan_fops);
+ if (!proc) {
+ printk(KERN_ERR "irlan_init: can't create /proc entry!\n");
+ return -ENODEV;
+ }
+ }
+#endif /* CONFIG_PROC_FS */
+
+ hints = irlmp_service_to_hint(S_LAN);
+
+ /* Register with IrLMP as a client */
+ ckey = irlmp_register_client(hints, &irlan_client_discovery_indication,
+ NULL, NULL);
+ if (!ckey)
+ goto err_ckey;
+
+ /* Register with IrLMP as a service */
+ skey = irlmp_register_service(hints);
+ if (!skey)
+ goto err_skey;
+
+ /* Start the master IrLAN instance (the only one for now) */
+ new = irlan_open(DEV_ADDR_ANY, DEV_ADDR_ANY);
+ if (!new)
+ goto err_open;
+
+ /* The master will only open its (listen) control TSAP */
+ irlan_provider_open_ctrl_tsap(new);
+
+ /* Do some fast discovery! */
+ irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+
+ return 0;
+
+err_open:
+ irlmp_unregister_service(skey);
+err_skey:
+ irlmp_unregister_client(ckey);
+err_ckey:
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("irlan", proc_irda);
+#endif /* CONFIG_PROC_FS */
+
+ return -ENOMEM;
+}
+
+static void __exit irlan_cleanup(void)
+{
+ struct irlan_cb *self, *next;
+
+ irlmp_unregister_client(ckey);
+ irlmp_unregister_service(skey);
+
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("irlan", proc_irda);
+#endif /* CONFIG_PROC_FS */
+
+ /* Cleanup any leftover network devices */
+ rtnl_lock();
+ list_for_each_entry_safe(self, next, &irlans, dev_list) {
+ __irlan_close(self);
+ }
+ rtnl_unlock();
+}
+
+/*
+ * Function irlan_open (void)
+ *
+ * Open new instance of a client/provider, we should only register the
+ * network device if this instance is ment for a particular client/provider
+ */
+static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr)
+{
+ struct net_device *dev;
+ struct irlan_cb *self;
+
+ /* Create network device with irlan */
+ dev = alloc_irlandev(eth ? "eth%d" : "irlan%d");
+ if (!dev)
+ return NULL;
+
+ self = netdev_priv(dev);
+ self->dev = dev;
+
+ /*
+ * Initialize local device structure
+ */
+ self->magic = IRLAN_MAGIC;
+ self->saddr = saddr;
+ self->daddr = daddr;
+
+ /* Provider access can only be PEER, DIRECT, or HOSTED */
+ self->provider.access_type = access;
+ if (access == ACCESS_DIRECT) {
+ /*
+ * Since we are emulating an IrLAN sever we will have to
+ * give ourself an ethernet address!
+ */
+ dev->dev_addr[0] = 0x40;
+ dev->dev_addr[1] = 0x00;
+ dev->dev_addr[2] = 0x00;
+ dev->dev_addr[3] = 0x00;
+ get_random_bytes(dev->dev_addr+4, 1);
+ get_random_bytes(dev->dev_addr+5, 1);
+ }
+
+ self->media = MEDIA_802_3;
+ self->disconnect_reason = LM_USER_REQUEST;
+ init_timer(&self->watchdog_timer);
+ init_timer(&self->client.kick_timer);
+ init_waitqueue_head(&self->open_wait);
+
+ skb_queue_head_init(&self->client.txq);
+
+ irlan_next_client_state(self, IRLAN_IDLE);
+ irlan_next_provider_state(self, IRLAN_IDLE);
+
+ if (register_netdev(dev)) {
+ pr_debug("%s(), register_netdev() failed!\n",
+ __func__);
+ self = NULL;
+ free_netdev(dev);
+ } else {
+ rtnl_lock();
+ list_add_rcu(&self->dev_list, &irlans);
+ rtnl_unlock();
+ }
+
+ return self;
+}
+/*
+ * Function __irlan_close (self)
+ *
+ * This function closes and deallocates the IrLAN client instances. Be
+ * aware that other functions which calls client_close() must
+ * remove self from irlans list first.
+ */
+static void __irlan_close(struct irlan_cb *self)
+{
+ ASSERT_RTNL();
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ del_timer_sync(&self->watchdog_timer);
+ del_timer_sync(&self->client.kick_timer);
+
+ /* Close all open connections and remove TSAPs */
+ irlan_close_tsaps(self);
+
+ if (self->client.iriap)
+ iriap_close(self->client.iriap);
+
+ /* Remove frames queued on the control channel */
+ skb_queue_purge(&self->client.txq);
+
+ /* Unregister and free self via destructor */
+ unregister_netdevice(self->dev);
+}
+
+/* Find any instance of irlan, used for client discovery wakeup */
+struct irlan_cb *irlan_get_any(void)
+{
+ struct irlan_cb *self;
+
+ list_for_each_entry_rcu(self, &irlans, dev_list) {
+ return self;
+ }
+ return NULL;
+}
+
+/*
+ * Function irlan_connect_indication (instance, sap, qos, max_sdu_size, skb)
+ *
+ * Here we receive the connect indication for the data channel
+ *
+ */
+static void irlan_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+ struct tsap_cb *tsap;
+
+ self = instance;
+ tsap = sap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+ IRDA_ASSERT(tsap == self->tsap_data,return;);
+
+ self->max_sdu_size = max_sdu_size;
+ self->max_header_size = max_header_size;
+
+ pr_debug("%s: We are now connected!\n", __func__);
+
+ del_timer(&self->watchdog_timer);
+
+ /* If you want to pass the skb to *both* state machines, you will
+ * need to skb_clone() it, so that you don't free it twice.
+ * As the state machines don't need it, git rid of it here...
+ * Jean II */
+ if (skb)
+ dev_kfree_skb(skb);
+
+ irlan_do_provider_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL);
+ irlan_do_client_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL);
+
+ if (self->provider.access_type == ACCESS_PEER) {
+ /*
+ * Data channel is open, so we are now allowed to
+ * configure the remote filter
+ */
+ irlan_get_unicast_addr(self);
+ irlan_open_unicast_addr(self);
+ }
+ /* Ready to transfer Ethernet frames (at last) */
+ netif_start_queue(self->dev); /* Clear reason */
+}
+
+static void irlan_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ self->max_sdu_size = max_sdu_size;
+ self->max_header_size = max_header_size;
+
+ /* TODO: we could set the MTU depending on the max_sdu_size */
+
+ pr_debug("%s: We are now connected!\n", __func__);
+ del_timer(&self->watchdog_timer);
+
+ /*
+ * Data channel is open, so we are now allowed to configure the remote
+ * filter
+ */
+ irlan_get_unicast_addr(self);
+ irlan_open_unicast_addr(self);
+
+ /* Open broadcast and multicast filter by default */
+ irlan_set_broadcast_filter(self, TRUE);
+ irlan_set_multicast_filter(self, TRUE);
+
+ /* Ready to transfer Ethernet frames */
+ netif_start_queue(self->dev);
+ self->disconnect_reason = 0; /* Clear reason */
+ wake_up_interruptible(&self->open_wait);
+}
+
+/*
+ * Function irlan_client_disconnect_indication (handle)
+ *
+ * Callback function for the IrTTP layer. Indicates a disconnection of
+ * the specified connection (handle)
+ */
+static void irlan_disconnect_indication(void *instance,
+ void *sap, LM_REASON reason,
+ struct sk_buff *userdata)
+{
+ struct irlan_cb *self;
+ struct tsap_cb *tsap;
+
+ pr_debug("%s(), reason=%d\n", __func__ , reason);
+
+ self = instance;
+ tsap = sap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+ IRDA_ASSERT(tsap != NULL, return;);
+ IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+
+ IRDA_ASSERT(tsap == self->tsap_data, return;);
+
+ pr_debug("IrLAN, data channel disconnected by peer!\n");
+
+ /* Save reason so we know if we should try to reconnect or not */
+ self->disconnect_reason = reason;
+
+ switch (reason) {
+ case LM_USER_REQUEST: /* User request */
+ pr_debug("%s(), User requested\n", __func__);
+ break;
+ case LM_LAP_DISCONNECT: /* Unexpected IrLAP disconnect */
+ pr_debug("%s(), Unexpected IrLAP disconnect\n", __func__);
+ break;
+ case LM_CONNECT_FAILURE: /* Failed to establish IrLAP connection */
+ pr_debug("%s(), IrLAP connect failed\n", __func__);
+ break;
+ case LM_LAP_RESET: /* IrLAP reset */
+ pr_debug("%s(), IrLAP reset\n", __func__);
+ break;
+ case LM_INIT_DISCONNECT:
+ pr_debug("%s(), IrLMP connect failed\n", __func__);
+ break;
+ default:
+ net_err_ratelimited("%s(), Unknown disconnect reason\n",
+ __func__);
+ break;
+ }
+
+ /* If you want to pass the skb to *both* state machines, you will
+ * need to skb_clone() it, so that you don't free it twice.
+ * As the state machines don't need it, git rid of it here...
+ * Jean II */
+ if (userdata)
+ dev_kfree_skb(userdata);
+
+ irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+ irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+
+ wake_up_interruptible(&self->open_wait);
+}
+
+void irlan_open_data_tsap(struct irlan_cb *self)
+{
+ struct tsap_cb *tsap;
+ notify_t notify;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Check if already open */
+ if (self->tsap_data)
+ return;
+
+ irda_notify_init(&notify);
+
+ notify.data_indication = irlan_eth_receive;
+ notify.udata_indication = irlan_eth_receive;
+ notify.connect_indication = irlan_connect_indication;
+ notify.connect_confirm = irlan_connect_confirm;
+ notify.flow_indication = irlan_eth_flow_indication;
+ notify.disconnect_indication = irlan_disconnect_indication;
+ notify.instance = self;
+ strlcpy(notify.name, "IrLAN data", sizeof(notify.name));
+
+ tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, &notify);
+ if (!tsap) {
+ pr_debug("%s(), Got no tsap!\n", __func__);
+ return;
+ }
+ self->tsap_data = tsap;
+
+ /*
+ * This is the data TSAP selector which we will pass to the client
+ * when the client ask for it.
+ */
+ self->stsap_sel_data = self->tsap_data->stsap_sel;
+}
+
+void irlan_close_tsaps(struct irlan_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Disconnect and close all open TSAP connections */
+ if (self->tsap_data) {
+ irttp_disconnect_request(self->tsap_data, NULL, P_NORMAL);
+ irttp_close_tsap(self->tsap_data);
+ self->tsap_data = NULL;
+ }
+ if (self->client.tsap_ctrl) {
+ irttp_disconnect_request(self->client.tsap_ctrl, NULL,
+ P_NORMAL);
+ irttp_close_tsap(self->client.tsap_ctrl);
+ self->client.tsap_ctrl = NULL;
+ }
+ if (self->provider.tsap_ctrl) {
+ irttp_disconnect_request(self->provider.tsap_ctrl, NULL,
+ P_NORMAL);
+ irttp_close_tsap(self->provider.tsap_ctrl);
+ self->provider.tsap_ctrl = NULL;
+ }
+ self->disconnect_reason = LM_USER_REQUEST;
+}
+
+/*
+ * Function irlan_ias_register (self, tsap_sel)
+ *
+ * Register with LM-IAS
+ *
+ */
+void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel)
+{
+ struct ias_object *obj;
+ struct ias_value *new_value;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /*
+ * Check if object has already been registered by a previous provider.
+ * If that is the case, we just change the value of the attribute
+ */
+ if (!irias_find_object("IrLAN")) {
+ obj = irias_new_object("IrLAN", IAS_IRLAN_ID);
+ irias_add_integer_attrib(obj, "IrDA:TinyTP:LsapSel", tsap_sel,
+ IAS_KERNEL_ATTR);
+ irias_insert_object(obj);
+ } else {
+ new_value = irias_new_integer_value(tsap_sel);
+ irias_object_change_attribute("IrLAN", "IrDA:TinyTP:LsapSel",
+ new_value);
+ }
+
+ /* Register PnP object only if not registered before */
+ if (!irias_find_object("PnP")) {
+ obj = irias_new_object("PnP", IAS_PNP_ID);
+#if 0
+ irias_add_string_attrib(obj, "Name", sysctl_devname,
+ IAS_KERNEL_ATTR);
+#else
+ irias_add_string_attrib(obj, "Name", "Linux", IAS_KERNEL_ATTR);
+#endif
+ irias_add_string_attrib(obj, "DeviceID", "HWP19F0",
+ IAS_KERNEL_ATTR);
+ irias_add_integer_attrib(obj, "CompCnt", 1, IAS_KERNEL_ATTR);
+ if (self->provider.access_type == ACCESS_PEER)
+ irias_add_string_attrib(obj, "Comp#01", "PNP8389",
+ IAS_KERNEL_ATTR);
+ else
+ irias_add_string_attrib(obj, "Comp#01", "PNP8294",
+ IAS_KERNEL_ATTR);
+
+ irias_add_string_attrib(obj, "Manufacturer",
+ "Linux-IrDA Project", IAS_KERNEL_ATTR);
+ irias_insert_object(obj);
+ }
+}
+
+/*
+ * Function irlan_run_ctrl_tx_queue (self)
+ *
+ * Try to send the next command in the control transmit queue
+ *
+ */
+int irlan_run_ctrl_tx_queue(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+
+ if (irda_lock(&self->client.tx_busy) == FALSE)
+ return -EBUSY;
+
+ skb = skb_dequeue(&self->client.txq);
+ if (!skb) {
+ self->client.tx_busy = FALSE;
+ return 0;
+ }
+
+ /* Check that it's really possible to send commands */
+ if ((self->client.tsap_ctrl == NULL) ||
+ (self->client.state == IRLAN_IDLE))
+ {
+ self->client.tx_busy = FALSE;
+ dev_kfree_skb(skb);
+ return -1;
+ }
+ pr_debug("%s(), sending ...\n", __func__);
+
+ return irttp_data_request(self->client.tsap_ctrl, skb);
+}
+
+/*
+ * Function irlan_ctrl_data_request (self, skb)
+ *
+ * This function makes sure that commands on the control channel is being
+ * sent in a command/response fashion
+ */
+static void irlan_ctrl_data_request(struct irlan_cb *self, struct sk_buff *skb)
+{
+ /* Queue command */
+ skb_queue_tail(&self->client.txq, skb);
+
+ /* Try to send command */
+ irlan_run_ctrl_tx_queue(self);
+}
+
+/*
+ * Function irlan_get_provider_info (self)
+ *
+ * Send Get Provider Information command to peer IrLAN layer
+ *
+ */
+void irlan_get_provider_info(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER,
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ frame[0] = CMD_GET_PROVIDER_INFO;
+ frame[1] = 0x00; /* Zero parameters */
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_open_data_channel (self)
+ *
+ * Send an Open Data Command to provider
+ *
+ */
+void irlan_open_data_channel(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3") +
+ IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "DIRECT"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ /* Build frame */
+ frame[0] = CMD_OPEN_DATA_CHANNEL;
+ frame[1] = 0x02; /* Two parameters */
+
+ irlan_insert_string_param(skb, "MEDIA", "802.3");
+ irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT");
+ /* irlan_insert_string_param(skb, "MODE", "UNRELIABLE"); */
+
+/* self->use_udata = TRUE; */
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+void irlan_close_data_channel(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Check if the TSAP is still there */
+ if (self->client.tsap_ctrl == NULL)
+ return;
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ /* Build frame */
+ frame[0] = CMD_CLOSE_DATA_CHAN;
+ frame[1] = 0x01; /* One parameter */
+
+ irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_open_unicast_addr (self)
+ *
+ * Make IrLAN provider accept ethernet frames addressed to the unicast
+ * address.
+ *
+ */
+static void irlan_open_unicast_addr(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ frame[0] = CMD_FILTER_OPERATION;
+ frame[1] = 0x03; /* Three parameters */
+ irlan_insert_byte_param(skb, "DATA_CHAN" , self->dtsap_sel_data);
+ irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+ irlan_insert_string_param(skb, "FILTER_MODE", "FILTER");
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_set_broadcast_filter (self, status)
+ *
+ * Make IrLAN provider accept ethernet frames addressed to the broadcast
+ * address. Be careful with the use of this one, since there may be a lot
+ * of broadcast traffic out there. We can still function without this
+ * one but then _we_ have to initiate all communication with other
+ * hosts, since ARP request for this host will not be answered.
+ */
+void irlan_set_broadcast_filter(struct irlan_cb *self, int status)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") +
+ /* We may waste one byte here...*/
+ IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ frame[0] = CMD_FILTER_OPERATION;
+ frame[1] = 0x03; /* Three parameters */
+ irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST");
+ if (status)
+ irlan_insert_string_param(skb, "FILTER_MODE", "FILTER");
+ else
+ irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_set_multicast_filter (self, status)
+ *
+ * Make IrLAN provider accept ethernet frames addressed to the multicast
+ * address.
+ *
+ */
+void irlan_set_multicast_filter(struct irlan_cb *self, int status)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") +
+ /* We may waste one byte here...*/
+ IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "NONE"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ frame[0] = CMD_FILTER_OPERATION;
+ frame[1] = 0x03; /* Three parameters */
+ irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST");
+ if (status)
+ irlan_insert_string_param(skb, "FILTER_MODE", "ALL");
+ else
+ irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_get_unicast_addr (self)
+ *
+ * Retrieves the unicast address from the IrLAN provider. This address
+ * will be inserted into the devices structure, so the ethernet layer
+ * can construct its packets.
+ *
+ */
+static void irlan_get_unicast_addr(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_OPERATION",
+ "DYNAMIC"),
+ GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ frame[0] = CMD_FILTER_OPERATION;
+ frame[1] = 0x03; /* Three parameters */
+ irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+ irlan_insert_string_param(skb, "FILTER_OPERATION", "DYNAMIC");
+
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_get_media_char (self)
+ *
+ *
+ *
+ */
+void irlan_get_media_char(struct irlan_cb *self)
+{
+ struct sk_buff *skb;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3"),
+ GFP_ATOMIC);
+
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->client.max_header_size);
+ skb_put(skb, 2);
+
+ frame = skb->data;
+
+ /* Build frame */
+ frame[0] = CMD_GET_MEDIA_CHAR;
+ frame[1] = 0x01; /* One parameter */
+
+ irlan_insert_string_param(skb, "MEDIA", "802.3");
+ irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function insert_byte_param (skb, param, value)
+ *
+ * Insert byte parameter into frame
+ *
+ */
+int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value)
+{
+ return __irlan_insert_param(skb, param, IRLAN_BYTE, value, 0, NULL, 0);
+}
+
+int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value)
+{
+ return __irlan_insert_param(skb, param, IRLAN_SHORT, 0, value, NULL, 0);
+}
+
+/*
+ * Function insert_string (skb, param, value)
+ *
+ * Insert string parameter into frame
+ *
+ */
+int irlan_insert_string_param(struct sk_buff *skb, char *param, char *string)
+{
+ int string_len = strlen(string);
+
+ return __irlan_insert_param(skb, param, IRLAN_ARRAY, 0, 0, string,
+ string_len);
+}
+
+/*
+ * Function insert_array_param(skb, param, value, len_value)
+ *
+ * Insert array parameter into frame
+ *
+ */
+int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *array,
+ __u16 array_len)
+{
+ return __irlan_insert_param(skb, name, IRLAN_ARRAY, 0, 0, array,
+ array_len);
+}
+
+/*
+ * Function insert_param (skb, param, value, byte)
+ *
+ * Insert parameter at end of buffer, structure of a parameter is:
+ *
+ * -----------------------------------------------------------------------
+ * | Name Length[1] | Param Name[1..255] | Val Length[2] | Value[0..1016]|
+ * -----------------------------------------------------------------------
+ */
+static int __irlan_insert_param(struct sk_buff *skb, char *param, int type,
+ __u8 value_byte, __u16 value_short,
+ __u8 *value_array, __u16 value_len)
+{
+ __u8 *frame;
+ __u8 param_len;
+ __le16 tmp_le; /* Temporary value in little endian format */
+ int n=0;
+
+ if (skb == NULL) {
+ pr_debug("%s(), Got NULL skb\n", __func__);
+ return 0;
+ }
+
+ param_len = strlen(param);
+ switch (type) {
+ case IRLAN_BYTE:
+ value_len = 1;
+ break;
+ case IRLAN_SHORT:
+ value_len = 2;
+ break;
+ case IRLAN_ARRAY:
+ IRDA_ASSERT(value_array != NULL, return 0;);
+ IRDA_ASSERT(value_len > 0, return 0;);
+ break;
+ default:
+ pr_debug("%s(), Unknown parameter type!\n", __func__);
+ return 0;
+ }
+
+ /* Insert at end of sk-buffer */
+ frame = skb_tail_pointer(skb);
+
+ /* Make space for data */
+ if (skb_tailroom(skb) < (param_len+value_len+3)) {
+ pr_debug("%s(), No more space at end of skb\n", __func__);
+ return 0;
+ }
+ skb_put(skb, param_len+value_len+3);
+
+ /* Insert parameter length */
+ frame[n++] = param_len;
+
+ /* Insert parameter */
+ memcpy(frame+n, param, param_len); n += param_len;
+
+ /* Insert value length (2 byte little endian format, LSB first) */
+ tmp_le = cpu_to_le16(value_len);
+ memcpy(frame+n, &tmp_le, 2); n += 2; /* To avoid alignment problems */
+
+ /* Insert value */
+ switch (type) {
+ case IRLAN_BYTE:
+ frame[n++] = value_byte;
+ break;
+ case IRLAN_SHORT:
+ tmp_le = cpu_to_le16(value_short);
+ memcpy(frame+n, &tmp_le, 2); n += 2;
+ break;
+ case IRLAN_ARRAY:
+ memcpy(frame+n, value_array, value_len); n+=value_len;
+ break;
+ default:
+ break;
+ }
+ IRDA_ASSERT(n == (param_len+value_len+3), return 0;);
+
+ return param_len+value_len+3;
+}
+
+/*
+ * Function irlan_extract_param (buf, name, value, len)
+ *
+ * Extracts a single parameter name/value pair from buffer and updates
+ * the buffer pointer to point to the next name/value pair.
+ */
+int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len)
+{
+ __u8 name_len;
+ __u16 val_len;
+ int n=0;
+
+ /* get length of parameter name (1 byte) */
+ name_len = buf[n++];
+
+ if (name_len > 254) {
+ pr_debug("%s(), name_len > 254\n", __func__);
+ return -RSP_INVALID_COMMAND_FORMAT;
+ }
+
+ /* get parameter name */
+ memcpy(name, buf+n, name_len);
+ name[name_len] = '\0';
+ n+=name_len;
+
+ /*
+ * Get length of parameter value (2 bytes in little endian
+ * format)
+ */
+ memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */
+ le16_to_cpus(&val_len); n+=2;
+
+ if (val_len >= 1016) {
+ pr_debug("%s(), parameter length to long\n", __func__);
+ return -RSP_INVALID_COMMAND_FORMAT;
+ }
+ *len = val_len;
+
+ /* get parameter value */
+ memcpy(value, buf+n, val_len);
+ value[val_len] = '\0';
+ n+=val_len;
+
+ pr_debug("Parameter: %s ", name);
+ pr_debug("Value: %s\n", value);
+
+ return n;
+}
+
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Start of reading /proc entries.
+ * Return entry at pos,
+ * or start_token to indicate print header line
+ * or NULL if end of file
+ */
+static void *irlan_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ rcu_read_lock();
+ return seq_list_start_head(&irlans, *pos);
+}
+
+/* Return entry after v, and increment pos */
+static void *irlan_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ return seq_list_next(v, &irlans, pos);
+}
+
+/* End of reading /proc file */
+static void irlan_seq_stop(struct seq_file *seq, void *v)
+{
+ rcu_read_unlock();
+}
+
+
+/*
+ * Show one entry in /proc file.
+ */
+static int irlan_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == &irlans)
+ seq_puts(seq, "IrLAN instances:\n");
+ else {
+ struct irlan_cb *self = list_entry(v, struct irlan_cb, dev_list);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ seq_printf(seq,"ifname: %s,\n",
+ self->dev->name);
+ seq_printf(seq,"client state: %s, ",
+ irlan_state[ self->client.state]);
+ seq_printf(seq,"provider state: %s,\n",
+ irlan_state[ self->provider.state]);
+ seq_printf(seq,"saddr: %#08x, ",
+ self->saddr);
+ seq_printf(seq,"daddr: %#08x\n",
+ self->daddr);
+ seq_printf(seq,"version: %d.%d,\n",
+ self->version[1], self->version[0]);
+ seq_printf(seq,"access type: %s\n",
+ irlan_access[self->client.access_type]);
+ seq_printf(seq,"media: %s\n",
+ irlan_media[self->media]);
+
+ seq_printf(seq,"local filter:\n");
+ seq_printf(seq,"remote filter: ");
+ irlan_print_filter(seq, self->client.filter_type);
+ seq_printf(seq,"tx busy: %s\n",
+ netif_queue_stopped(self->dev) ? "TRUE" : "FALSE");
+
+ seq_putc(seq,'\n');
+ }
+ return 0;
+}
+
+static const struct seq_operations irlan_seq_ops = {
+ .start = irlan_seq_start,
+ .next = irlan_seq_next,
+ .stop = irlan_seq_stop,
+ .show = irlan_seq_show,
+};
+
+static int irlan_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &irlan_seq_ops);
+}
+#endif
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("The Linux IrDA LAN protocol");
+MODULE_LICENSE("GPL");
+
+module_param(eth, bool, 0);
+MODULE_PARM_DESC(eth, "Name devices ethX (0) or irlanX (1)");
+module_param(access, int, 0);
+MODULE_PARM_DESC(access, "Access type DIRECT=1, PEER=2, HOSTED=3");
+
+module_init(irlan_init);
+module_exit(irlan_cleanup);
+
diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c
new file mode 100644
index 000000000..fcfbe5794
--- /dev/null
+++ b/net/irda/irlan/irlan_eth.c
@@ -0,0 +1,340 @@
+/*********************************************************************
+ *
+ * Filename: irlan_eth.c
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Thu Oct 15 08:37:58 1998
+ * Modified at: Tue Mar 21 09:06:41 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
+ * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/if_arp.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <net/arp.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_eth.h>
+
+static int irlan_eth_open(struct net_device *dev);
+static int irlan_eth_close(struct net_device *dev);
+static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static void irlan_eth_set_multicast_list(struct net_device *dev);
+
+static const struct net_device_ops irlan_eth_netdev_ops = {
+ .ndo_open = irlan_eth_open,
+ .ndo_stop = irlan_eth_close,
+ .ndo_start_xmit = irlan_eth_xmit,
+ .ndo_set_rx_mode = irlan_eth_set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/*
+ * Function irlan_eth_setup (dev)
+ *
+ * The network device initialization function.
+ *
+ */
+static void irlan_eth_setup(struct net_device *dev)
+{
+ ether_setup(dev);
+
+ dev->netdev_ops = &irlan_eth_netdev_ops;
+ dev->destructor = free_netdev;
+
+
+ /*
+ * Lets do all queueing in IrTTP instead of this device driver.
+ * Queueing here as well can introduce some strange latency
+ * problems, which we will avoid by setting the queue size to 0.
+ */
+ /*
+ * The bugs in IrTTP and IrLAN that created this latency issue
+ * have now been fixed, and we can propagate flow control properly
+ * to the network layer. However, this requires a minimal queue of
+ * packets for the device.
+ * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14
+ * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11
+ * See irlan_eth_flow_indication()...
+ * Note : this number was randomly selected and would need to
+ * be adjusted.
+ * Jean II */
+ dev->tx_queue_len = 4;
+}
+
+/*
+ * Function alloc_irlandev
+ *
+ * Allocate network device and control block
+ *
+ */
+struct net_device *alloc_irlandev(const char *name)
+{
+ return alloc_netdev(sizeof(struct irlan_cb), name, NET_NAME_UNKNOWN,
+ irlan_eth_setup);
+}
+
+/*
+ * Function irlan_eth_open (dev)
+ *
+ * Network device has been opened by user
+ *
+ */
+static int irlan_eth_open(struct net_device *dev)
+{
+ struct irlan_cb *self = netdev_priv(dev);
+
+ /* Ready to play! */
+ netif_stop_queue(dev); /* Wait until data link is ready */
+
+ /* We are now open, so time to do some work */
+ self->disconnect_reason = 0;
+ irlan_client_wakeup(self, self->saddr, self->daddr);
+
+ /* Make sure we have a hardware address before we return,
+ so DHCP clients gets happy */
+ return wait_event_interruptible(self->open_wait,
+ !self->tsap_data->connected);
+}
+
+/*
+ * Function irlan_eth_close (dev)
+ *
+ * Stop the ether network device, his function will usually be called by
+ * ifconfig down. We should now disconnect the link, We start the
+ * close timer, so that the instance will be removed if we are unable
+ * to discover the remote device after the disconnect.
+ */
+static int irlan_eth_close(struct net_device *dev)
+{
+ struct irlan_cb *self = netdev_priv(dev);
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ irlan_close_data_channel(self);
+ irlan_close_tsaps(self);
+
+ irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+ irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+
+ /* Remove frames queued on the control channel */
+ skb_queue_purge(&self->client.txq);
+
+ self->client.tx_busy = 0;
+
+ return 0;
+}
+
+/*
+ * Function irlan_eth_tx (skb)
+ *
+ * Transmits ethernet frames over IrDA link.
+ *
+ */
+static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct irlan_cb *self = netdev_priv(dev);
+ int ret;
+ unsigned int len;
+
+ /* skb headroom large enough to contain all IrDA-headers? */
+ if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) {
+ struct sk_buff *new_skb =
+ skb_realloc_headroom(skb, self->max_header_size);
+
+ /* We have to free the original skb anyway */
+ dev_kfree_skb(skb);
+
+ /* Did the realloc succeed? */
+ if (new_skb == NULL)
+ return NETDEV_TX_OK;
+
+ /* Use the new skb instead */
+ skb = new_skb;
+ }
+
+ dev->trans_start = jiffies;
+
+ len = skb->len;
+ /* Now queue the packet in the transport layer */
+ if (self->use_udata)
+ ret = irttp_udata_request(self->tsap_data, skb);
+ else
+ ret = irttp_data_request(self->tsap_data, skb);
+
+ if (ret < 0) {
+ /*
+ * IrTTPs tx queue is full, so we just have to
+ * drop the frame! You might think that we should
+ * just return -1 and don't deallocate the frame,
+ * but that is dangerous since it's possible that
+ * we have replaced the original skb with a new
+ * one with larger headroom, and that would really
+ * confuse do_dev_queue_xmit() in dev.c! I have
+ * tried :-) DB
+ */
+ /* irttp_data_request already free the packet */
+ dev->stats.tx_dropped++;
+ } else {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += len;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/*
+ * Function irlan_eth_receive (handle, skb)
+ *
+ * This function gets the data that is received on the data channel
+ *
+ */
+int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb)
+{
+ struct irlan_cb *self = instance;
+ struct net_device *dev = self->dev;
+
+ if (skb == NULL) {
+ dev->stats.rx_dropped++;
+ return 0;
+ }
+ if (skb->len < ETH_HLEN) {
+ pr_debug("%s() : IrLAN frame too short (%d)\n",
+ __func__, skb->len);
+ dev->stats.rx_dropped++;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ /*
+ * Adopt this frame! Important to set all these fields since they
+ * might have been previously set by the low level IrDA network
+ * device driver
+ */
+ skb->protocol = eth_type_trans(skb, dev); /* Remove eth header */
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ netif_rx(skb); /* Eat it! */
+
+ return 0;
+}
+
+/*
+ * Function irlan_eth_flow (status)
+ *
+ * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by
+ * controlling the queue stop/start.
+ *
+ * The IrDA link layer has the advantage to have flow control, and
+ * IrTTP now properly handles that. Flow controlling the higher layers
+ * prevent us to drop Tx packets in here (up to 15% for a TCP socket,
+ * more for UDP socket).
+ * Also, this allow us to reduce the overall transmit queue, which means
+ * less latency in case of mixed traffic.
+ * Jean II
+ */
+void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+ struct irlan_cb *self;
+ struct net_device *dev;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ dev = self->dev;
+
+ IRDA_ASSERT(dev != NULL, return;);
+
+ pr_debug("%s() : flow %s ; running %d\n", __func__,
+ flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START",
+ netif_running(dev));
+
+ switch (flow) {
+ case FLOW_STOP:
+ /* IrTTP is full, stop higher layers */
+ netif_stop_queue(dev);
+ break;
+ case FLOW_START:
+ default:
+ /* Tell upper layers that its time to transmit frames again */
+ /* Schedule network layer */
+ netif_wake_queue(dev);
+ break;
+ }
+}
+
+/*
+ * Function set_multicast_list (dev)
+ *
+ * Configure the filtering of the device
+ *
+ */
+#define HW_MAX_ADDRS 4 /* Must query to get it! */
+static void irlan_eth_set_multicast_list(struct net_device *dev)
+{
+ struct irlan_cb *self = netdev_priv(dev);
+
+ /* Check if data channel has been connected yet */
+ if (self->client.state != IRLAN_DATA) {
+ pr_debug("%s(), delaying!\n", __func__);
+ return;
+ }
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Enable promiscuous mode */
+ net_warn_ratelimited("Promiscuous mode not implemented by IrLAN!\n");
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ netdev_mc_count(dev) > HW_MAX_ADDRS) {
+ /* Disable promiscuous mode, use normal mode. */
+ pr_debug("%s(), Setting multicast filter\n", __func__);
+ /* hardware_set_filter(NULL); */
+
+ irlan_set_multicast_filter(self, TRUE);
+ } else if (!netdev_mc_empty(dev)) {
+ pr_debug("%s(), Setting multicast filter\n", __func__);
+ /* Walk the address list, and load the filter */
+ /* hardware_set_filter(dev->mc_list); */
+
+ irlan_set_multicast_filter(self, TRUE);
+ } else {
+ pr_debug("%s(), Clearing multicast filter\n", __func__);
+ irlan_set_multicast_filter(self, FALSE);
+ }
+
+ if (dev->flags & IFF_BROADCAST)
+ irlan_set_broadcast_filter(self, TRUE);
+ else
+ irlan_set_broadcast_filter(self, FALSE);
+}
diff --git a/net/irda/irlan/irlan_event.c b/net/irda/irlan/irlan_event.c
new file mode 100644
index 000000000..9a1cc11c1
--- /dev/null
+++ b/net/irda/irlan/irlan_event.c
@@ -0,0 +1,60 @@
+/*********************************************************************
+ *
+ * Filename: irlan_event.c
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Oct 20 09:10:16 1998
+ * Modified at: Sat Oct 30 12:59:01 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <net/irda/irlan_event.h>
+
+const char * const irlan_state[] = {
+ "IRLAN_IDLE",
+ "IRLAN_QUERY",
+ "IRLAN_CONN",
+ "IRLAN_INFO",
+ "IRLAN_MEDIA",
+ "IRLAN_OPEN",
+ "IRLAN_WAIT",
+ "IRLAN_ARB",
+ "IRLAN_DATA",
+ "IRLAN_CLOSE",
+ "IRLAN_SYNC",
+};
+
+void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state)
+{
+ pr_debug("%s(), %s\n", __func__ , irlan_state[state]);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ self->client.state = state;
+}
+
+void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state)
+{
+ pr_debug("%s(), %s\n", __func__ , irlan_state[state]);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ self->provider.state = state;
+}
+
diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c
new file mode 100644
index 000000000..e755e90b2
--- /dev/null
+++ b/net/irda/irlan/irlan_filter.c
@@ -0,0 +1,240 @@
+/*********************************************************************
+ *
+ * Filename: irlan_filter.c
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Fri Jan 29 11:16:38 1999
+ * Modified at: Sat Oct 30 12:58:45 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_filter.h>
+
+/*
+ * Function irlan_filter_request (self, skb)
+ *
+ * Handle filter request from client peer device
+ *
+ */
+void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ if ((self->provider.filter_type == IRLAN_DIRECTED) &&
+ (self->provider.filter_operation == DYNAMIC))
+ {
+ pr_debug("Giving peer a dynamic Ethernet address\n");
+ self->provider.mac_address[0] = 0x40;
+ self->provider.mac_address[1] = 0x00;
+ self->provider.mac_address[2] = 0x00;
+ self->provider.mac_address[3] = 0x00;
+
+ /* Use arbitration value to generate MAC address */
+ if (self->provider.access_type == ACCESS_PEER) {
+ self->provider.mac_address[4] =
+ self->provider.send_arb_val & 0xff;
+ self->provider.mac_address[5] =
+ (self->provider.send_arb_val >> 8) & 0xff;
+ } else {
+ /* Just generate something for now */
+ get_random_bytes(self->provider.mac_address+4, 1);
+ get_random_bytes(self->provider.mac_address+5, 1);
+ }
+
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x03;
+ irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+ irlan_insert_short_param(skb, "MAX_ENTRY", 0x0001);
+ irlan_insert_array_param(skb, "FILTER_ENTRY",
+ self->provider.mac_address, 6);
+ return;
+ }
+
+ if ((self->provider.filter_type == IRLAN_DIRECTED) &&
+ (self->provider.filter_mode == FILTER))
+ {
+ pr_debug("Directed filter on\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+ if ((self->provider.filter_type == IRLAN_DIRECTED) &&
+ (self->provider.filter_mode == NONE))
+ {
+ pr_debug("Directed filter off\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+
+ if ((self->provider.filter_type == IRLAN_BROADCAST) &&
+ (self->provider.filter_mode == FILTER))
+ {
+ pr_debug("Broadcast filter on\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+ if ((self->provider.filter_type == IRLAN_BROADCAST) &&
+ (self->provider.filter_mode == NONE))
+ {
+ pr_debug("Broadcast filter off\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+ if ((self->provider.filter_type == IRLAN_MULTICAST) &&
+ (self->provider.filter_mode == FILTER))
+ {
+ pr_debug("Multicast filter on\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+ if ((self->provider.filter_type == IRLAN_MULTICAST) &&
+ (self->provider.filter_mode == NONE))
+ {
+ pr_debug("Multicast filter off\n");
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x00;
+ return;
+ }
+ if ((self->provider.filter_type == IRLAN_MULTICAST) &&
+ (self->provider.filter_operation == GET))
+ {
+ pr_debug("Multicast filter get\n");
+ skb->data[0] = 0x00; /* Success? */
+ skb->data[1] = 0x02;
+ irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+ irlan_insert_short_param(skb, "MAX_ENTRY", 16);
+ return;
+ }
+ skb->data[0] = 0x00; /* Command not supported */
+ skb->data[1] = 0x00;
+
+ pr_debug("Not implemented!\n");
+}
+
+/*
+ * Function check_request_param (self, param, value)
+ *
+ * Check parameters in request from peer device
+ *
+ */
+void irlan_check_command_param(struct irlan_cb *self, char *param, char *value)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ pr_debug("%s, %s\n", param, value);
+
+ /*
+ * This is experimental!! DB.
+ */
+ if (strcmp(param, "MODE") == 0) {
+ self->use_udata = TRUE;
+ return;
+ }
+
+ /*
+ * FILTER_TYPE
+ */
+ if (strcmp(param, "FILTER_TYPE") == 0) {
+ if (strcmp(value, "DIRECTED") == 0) {
+ self->provider.filter_type = IRLAN_DIRECTED;
+ return;
+ }
+ if (strcmp(value, "MULTICAST") == 0) {
+ self->provider.filter_type = IRLAN_MULTICAST;
+ return;
+ }
+ if (strcmp(value, "BROADCAST") == 0) {
+ self->provider.filter_type = IRLAN_BROADCAST;
+ return;
+ }
+ }
+ /*
+ * FILTER_MODE
+ */
+ if (strcmp(param, "FILTER_MODE") == 0) {
+ if (strcmp(value, "ALL") == 0) {
+ self->provider.filter_mode = ALL;
+ return;
+ }
+ if (strcmp(value, "FILTER") == 0) {
+ self->provider.filter_mode = FILTER;
+ return;
+ }
+ if (strcmp(value, "NONE") == 0) {
+ self->provider.filter_mode = FILTER;
+ return;
+ }
+ }
+ /*
+ * FILTER_OPERATION
+ */
+ if (strcmp(param, "FILTER_OPERATION") == 0) {
+ if (strcmp(value, "DYNAMIC") == 0) {
+ self->provider.filter_operation = DYNAMIC;
+ return;
+ }
+ if (strcmp(value, "GET") == 0) {
+ self->provider.filter_operation = GET;
+ return;
+ }
+ }
+}
+
+/*
+ * Function irlan_print_filter (filter_type, buf)
+ *
+ * Print status of filter. Used by /proc file system
+ *
+ */
+#ifdef CONFIG_PROC_FS
+#define MASK2STR(m,s) { .mask = m, .str = s }
+
+void irlan_print_filter(struct seq_file *seq, int filter_type)
+{
+ static struct {
+ int mask;
+ const char *str;
+ } filter_mask2str[] = {
+ MASK2STR(IRLAN_DIRECTED, "DIRECTED"),
+ MASK2STR(IRLAN_FUNCTIONAL, "FUNCTIONAL"),
+ MASK2STR(IRLAN_GROUP, "GROUP"),
+ MASK2STR(IRLAN_MAC_FRAME, "MAC_FRAME"),
+ MASK2STR(IRLAN_MULTICAST, "MULTICAST"),
+ MASK2STR(IRLAN_BROADCAST, "BROADCAST"),
+ MASK2STR(IRLAN_IPX_SOCKET, "IPX_SOCKET"),
+ MASK2STR(0, NULL)
+ }, *p;
+
+ for (p = filter_mask2str; p->str; p++) {
+ if (filter_type & p->mask)
+ seq_printf(seq, "%s ", p->str);
+ }
+ seq_putc(seq, '\n');
+}
+#undef MASK2STR
+#endif
diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c
new file mode 100644
index 000000000..15c292cf2
--- /dev/null
+++ b/net/irda/irlan/irlan_provider.c
@@ -0,0 +1,408 @@
+/*********************************************************************
+ *
+ * Filename: irlan_provider.c
+ * Version: 0.9
+ * Description: IrDA LAN Access Protocol Implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:37 1997
+ * Modified at: Sat Oct 30 12:52:10 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
+ * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_filter.h>
+#include <net/irda/irlan_client.h>
+
+static void irlan_provider_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb);
+
+/*
+ * Function irlan_provider_control_data_indication (handle, skb)
+ *
+ * This function gets the data that is received on the control channel
+ *
+ */
+static int irlan_provider_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+ __u8 code;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ code = skb->data[0];
+ switch(code) {
+ case CMD_GET_PROVIDER_INFO:
+ pr_debug("Got GET_PROVIDER_INFO command!\n");
+ irlan_do_provider_event(self, IRLAN_GET_INFO_CMD, skb);
+ break;
+
+ case CMD_GET_MEDIA_CHAR:
+ pr_debug("Got GET_MEDIA_CHAR command!\n");
+ irlan_do_provider_event(self, IRLAN_GET_MEDIA_CMD, skb);
+ break;
+ case CMD_OPEN_DATA_CHANNEL:
+ pr_debug("Got OPEN_DATA_CHANNEL command!\n");
+ irlan_do_provider_event(self, IRLAN_OPEN_DATA_CMD, skb);
+ break;
+ case CMD_FILTER_OPERATION:
+ pr_debug("Got FILTER_OPERATION command!\n");
+ irlan_do_provider_event(self, IRLAN_FILTER_CONFIG_CMD, skb);
+ break;
+ case CMD_RECONNECT_DATA_CHAN:
+ pr_debug("%s(), Got RECONNECT_DATA_CHAN command\n", __func__);
+ pr_debug("%s(), NOT IMPLEMENTED\n", __func__);
+ break;
+ case CMD_CLOSE_DATA_CHAN:
+ pr_debug("Got CLOSE_DATA_CHAN command!\n");
+ pr_debug("%s(), NOT IMPLEMENTED\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown command!\n", __func__);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Function irlan_provider_connect_indication (handle, skb, priv)
+ *
+ * Got connection from peer IrLAN client
+ *
+ */
+static void irlan_provider_connect_indication(void *instance, void *sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct irlan_cb *self;
+ struct tsap_cb *tsap;
+
+ self = instance;
+ tsap = sap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;);
+ IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;);
+
+ self->provider.max_sdu_size = max_sdu_size;
+ self->provider.max_header_size = max_header_size;
+
+ irlan_do_provider_event(self, IRLAN_CONNECT_INDICATION, NULL);
+
+ /*
+ * If we are in peer mode, the client may not have got the discovery
+ * indication it needs to make progress. If the client is still in
+ * IDLE state, we must kick it.
+ */
+ if ((self->provider.access_type == ACCESS_PEER) &&
+ (self->client.state == IRLAN_IDLE))
+ {
+ irlan_client_wakeup(self, self->saddr, self->daddr);
+ }
+}
+
+/*
+ * Function irlan_provider_connect_response (handle)
+ *
+ * Accept incoming connection
+ *
+ */
+void irlan_provider_connect_response(struct irlan_cb *self,
+ struct tsap_cb *tsap)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ /* Just accept */
+ irttp_connect_response(tsap, IRLAN_MTU, NULL);
+}
+
+static void irlan_provider_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason,
+ struct sk_buff *userdata)
+{
+ struct irlan_cb *self;
+ struct tsap_cb *tsap;
+
+ pr_debug("%s(), reason=%d\n", __func__ , reason);
+
+ self = instance;
+ tsap = sap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+ IRDA_ASSERT(tsap != NULL, return;);
+ IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+
+ IRDA_ASSERT(tsap == self->provider.tsap_ctrl, return;);
+
+ irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+}
+
+/*
+ * Function irlan_parse_open_data_cmd (self, skb)
+ *
+ *
+ *
+ */
+int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb)
+{
+ int ret;
+
+ ret = irlan_provider_parse_command(self, CMD_OPEN_DATA_CHANNEL, skb);
+
+ /* Open data channel */
+ irlan_open_data_tsap(self);
+
+ return ret;
+}
+
+/*
+ * Function parse_command (skb)
+ *
+ * Extract all parameters from received buffer, then feed them to
+ * check_params for parsing
+ *
+ */
+int irlan_provider_parse_command(struct irlan_cb *self, int cmd,
+ struct sk_buff *skb)
+{
+ __u8 *frame;
+ __u8 *ptr;
+ int count;
+ __u16 val_len;
+ int i;
+ char *name;
+ char *value;
+ int ret = RSP_SUCCESS;
+
+ IRDA_ASSERT(skb != NULL, return -RSP_PROTOCOL_ERROR;);
+
+ pr_debug("%s(), skb->len=%d\n", __func__ , (int)skb->len);
+
+ IRDA_ASSERT(self != NULL, return -RSP_PROTOCOL_ERROR;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -RSP_PROTOCOL_ERROR;);
+
+ if (!skb)
+ return -RSP_PROTOCOL_ERROR;
+
+ frame = skb->data;
+
+ name = kmalloc(255, GFP_ATOMIC);
+ if (!name)
+ return -RSP_INSUFFICIENT_RESOURCES;
+ value = kmalloc(1016, GFP_ATOMIC);
+ if (!value) {
+ kfree(name);
+ return -RSP_INSUFFICIENT_RESOURCES;
+ }
+
+ /* How many parameters? */
+ count = frame[1];
+
+ pr_debug("Got %d parameters\n", count);
+
+ ptr = frame+2;
+
+ /* For all parameters */
+ for (i=0; i<count;i++) {
+ ret = irlan_extract_param(ptr, name, value, &val_len);
+ if (ret < 0) {
+ pr_debug("%s(), IrLAN, Error!\n", __func__);
+ break;
+ }
+ ptr+=ret;
+ ret = RSP_SUCCESS;
+ irlan_check_command_param(self, name, value);
+ }
+ /* Cleanup */
+ kfree(name);
+ kfree(value);
+
+ return ret;
+}
+
+/*
+ * Function irlan_provider_send_reply (self, info)
+ *
+ * Send reply to query to peer IrLAN layer
+ *
+ */
+void irlan_provider_send_reply(struct irlan_cb *self, int command,
+ int ret_code)
+{
+ struct sk_buff *skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER +
+ /* Bigger param length comes from CMD_GET_MEDIA_CHAR */
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") +
+ IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") +
+ IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "HOSTED"),
+ GFP_ATOMIC);
+
+ if (!skb)
+ return;
+
+ /* Reserve space for TTP, LMP, and LAP header */
+ skb_reserve(skb, self->provider.max_header_size);
+ skb_put(skb, 2);
+
+ switch (command) {
+ case CMD_GET_PROVIDER_INFO:
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x02; /* 2 parameters */
+ switch (self->media) {
+ case MEDIA_802_3:
+ irlan_insert_string_param(skb, "MEDIA", "802.3");
+ break;
+ case MEDIA_802_5:
+ irlan_insert_string_param(skb, "MEDIA", "802.5");
+ break;
+ default:
+ pr_debug("%s(), unknown media type!\n", __func__);
+ break;
+ }
+ irlan_insert_short_param(skb, "IRLAN_VER", 0x0101);
+ break;
+
+ case CMD_GET_MEDIA_CHAR:
+ skb->data[0] = 0x00; /* Success */
+ skb->data[1] = 0x05; /* 5 parameters */
+ irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+ irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST");
+ irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST");
+
+ switch (self->provider.access_type) {
+ case ACCESS_DIRECT:
+ irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT");
+ break;
+ case ACCESS_PEER:
+ irlan_insert_string_param(skb, "ACCESS_TYPE", "PEER");
+ break;
+ case ACCESS_HOSTED:
+ irlan_insert_string_param(skb, "ACCESS_TYPE", "HOSTED");
+ break;
+ default:
+ pr_debug("%s(), Unknown access type\n", __func__);
+ break;
+ }
+ irlan_insert_short_param(skb, "MAX_FRAME", 0x05ee);
+ break;
+ case CMD_OPEN_DATA_CHANNEL:
+ skb->data[0] = 0x00; /* Success */
+ if (self->provider.send_arb_val) {
+ skb->data[1] = 0x03; /* 3 parameters */
+ irlan_insert_short_param(skb, "CON_ARB",
+ self->provider.send_arb_val);
+ } else
+ skb->data[1] = 0x02; /* 2 parameters */
+ irlan_insert_byte_param(skb, "DATA_CHAN", self->stsap_sel_data);
+ irlan_insert_string_param(skb, "RECONNECT_KEY", "LINUX RULES!");
+ break;
+ case CMD_FILTER_OPERATION:
+ irlan_filter_request(self, skb);
+ break;
+ default:
+ pr_debug("%s(), Unknown command!\n", __func__);
+ break;
+ }
+
+ irttp_data_request(self->provider.tsap_ctrl, skb);
+}
+
+/*
+ * Function irlan_provider_register(void)
+ *
+ * Register provider support so we can accept incoming connections.
+ *
+ */
+int irlan_provider_open_ctrl_tsap(struct irlan_cb *self)
+{
+ struct tsap_cb *tsap;
+ notify_t notify;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ /* Check if already open */
+ if (self->provider.tsap_ctrl)
+ return -1;
+
+ /*
+ * First register well known control TSAP
+ */
+ irda_notify_init(&notify);
+ notify.data_indication = irlan_provider_data_indication;
+ notify.connect_indication = irlan_provider_connect_indication;
+ notify.disconnect_indication = irlan_provider_disconnect_indication;
+ notify.instance = self;
+ strlcpy(notify.name, "IrLAN ctrl (p)", sizeof(notify.name));
+
+ tsap = irttp_open_tsap(LSAP_ANY, 1, &notify);
+ if (!tsap) {
+ pr_debug("%s(), Got no tsap!\n", __func__);
+ return -1;
+ }
+ self->provider.tsap_ctrl = tsap;
+
+ /* Register with LM-IAS */
+ irlan_ias_register(self, tsap->stsap_sel);
+
+ return 0;
+}
+
diff --git a/net/irda/irlan/irlan_provider_event.c b/net/irda/irlan/irlan_provider_event.c
new file mode 100644
index 000000000..9c4f7f51d
--- /dev/null
+++ b/net/irda/irlan/irlan_provider_event.c
@@ -0,0 +1,233 @@
+/*********************************************************************
+ *
+ * Filename: irlan_provider_event.c
+ * Version: 0.9
+ * Description: IrLAN provider state machine)
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:37 1997
+ * Modified at: Sat Oct 30 12:52:41 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_event.h>
+
+static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb);
+
+static int (*state[])(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb) =
+{
+ irlan_provider_state_idle,
+ NULL, /* Query */
+ NULL, /* Info */
+ irlan_provider_state_info,
+ NULL, /* Media */
+ irlan_provider_state_open,
+ NULL, /* Wait */
+ NULL, /* Arb */
+ irlan_provider_state_data,
+ NULL, /* Close */
+ NULL, /* Sync */
+};
+
+void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(*state[ self->provider.state] != NULL, return;);
+
+ (*state[self->provider.state]) (self, event, skb);
+}
+
+/*
+ * Function irlan_provider_state_idle (event, skb, info)
+ *
+ * IDLE, We are waiting for an indication that there is a provider
+ * available.
+ */
+static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_CONNECT_INDICATION:
+ irlan_provider_connect_response( self, self->provider.tsap_ctrl);
+ irlan_next_provider_state( self, IRLAN_INFO);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_provider_state_info (self, event, skb, info)
+ *
+ * INFO, We have issued a GetInfo command and is awaiting a reply.
+ */
+static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_GET_INFO_CMD:
+ /* Be sure to use 802.3 in case of peer mode */
+ if (self->provider.access_type == ACCESS_PEER) {
+ self->media = MEDIA_802_3;
+
+ /* Check if client has started yet */
+ if (self->client.state == IRLAN_IDLE) {
+ /* This should get the client going */
+ irlmp_discovery_request(8);
+ }
+ }
+
+ irlan_provider_send_reply(self, CMD_GET_PROVIDER_INFO,
+ RSP_SUCCESS);
+ /* Keep state */
+ break;
+ case IRLAN_GET_MEDIA_CMD:
+ irlan_provider_send_reply(self, CMD_GET_MEDIA_CHAR,
+ RSP_SUCCESS);
+ /* Keep state */
+ break;
+ case IRLAN_OPEN_DATA_CMD:
+ ret = irlan_parse_open_data_cmd(self, skb);
+ if (self->provider.access_type == ACCESS_PEER) {
+ /* FIXME: make use of random functions! */
+ self->provider.send_arb_val = (jiffies & 0xffff);
+ }
+ irlan_provider_send_reply(self, CMD_OPEN_DATA_CHANNEL, ret);
+
+ if (ret == RSP_SUCCESS) {
+ irlan_next_provider_state(self, IRLAN_OPEN);
+
+ /* Signal client that we are now open */
+ irlan_do_client_event(self, IRLAN_PROVIDER_SIGNAL, NULL);
+ }
+ break;
+ case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_provider_state(self, IRLAN_IDLE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_provider_state_open (self, event, skb, info)
+ *
+ * OPEN, The client has issued a OpenData command and is awaiting a
+ * reply
+ *
+ */
+static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ switch(event) {
+ case IRLAN_FILTER_CONFIG_CMD:
+ irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb);
+ irlan_provider_send_reply(self, CMD_FILTER_OPERATION,
+ RSP_SUCCESS);
+ /* Keep state */
+ break;
+ case IRLAN_DATA_CONNECT_INDICATION:
+ irlan_next_provider_state(self, IRLAN_DATA);
+ irlan_provider_connect_response(self, self->tsap_data);
+ break;
+ case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_provider_state(self, IRLAN_IDLE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irlan_provider_state_data (self, event, skb, info)
+ *
+ * DATA, The data channel is connected, allowing data transfers between
+ * the local and remote machines.
+ *
+ */
+static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+ switch(event) {
+ case IRLAN_FILTER_CONFIG_CMD:
+ irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb);
+ irlan_provider_send_reply(self, CMD_FILTER_OPERATION,
+ RSP_SUCCESS);
+ break;
+ case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+ case IRLAN_LAP_DISCONNECT:
+ irlan_next_provider_state(self, IRLAN_IDLE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__ , event);
+ break;
+ }
+ if (skb)
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+
+
+
+
+
+
+
+
+
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
new file mode 100644
index 000000000..1cde711bc
--- /dev/null
+++ b/net/irda/irlap.c
@@ -0,0 +1,1207 @@
+/*********************************************************************
+ *
+ * Filename: irlap.c
+ * Version: 1.0
+ * Description: IrLAP implementation for Linux
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Aug 4 20:40:53 1997
+ * Modified at: Tue Dec 14 09:26:44 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/qos.h>
+
+static hashbin_t *irlap = NULL;
+int sysctl_slot_timeout = SLOT_TIMEOUT * 1000 / HZ;
+
+/* This is the delay of missed pf period before generating an event
+ * to the application. The spec mandate 3 seconds, but in some cases
+ * it's way too long. - Jean II */
+int sysctl_warn_noreply_time = 3;
+
+extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
+static void __irlap_close(struct irlap_cb *self);
+static void irlap_init_qos_capabilities(struct irlap_cb *self,
+ struct qos_info *qos_user);
+
+static const char *const lap_reasons[] __maybe_unused = {
+ "ERROR, NOT USED",
+ "LAP_DISC_INDICATION",
+ "LAP_NO_RESPONSE",
+ "LAP_RESET_INDICATION",
+ "LAP_FOUND_NONE",
+ "LAP_MEDIA_BUSY",
+ "LAP_PRIMARY_CONFLICT",
+ "ERROR, NOT USED",
+};
+
+int __init irlap_init(void)
+{
+ /* Check if the compiler did its job properly.
+ * May happen on some ARM configuration, check with Russell King. */
+ IRDA_ASSERT(sizeof(struct xid_frame) == 14, ;);
+ IRDA_ASSERT(sizeof(struct test_frame) == 10, ;);
+ IRDA_ASSERT(sizeof(struct ua_frame) == 10, ;);
+ IRDA_ASSERT(sizeof(struct snrm_frame) == 11, ;);
+
+ /* Allocate master array */
+ irlap = hashbin_new(HB_LOCK);
+ if (irlap == NULL) {
+ net_err_ratelimited("%s: can't allocate irlap hashbin!\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void irlap_cleanup(void)
+{
+ IRDA_ASSERT(irlap != NULL, return;);
+
+ hashbin_delete(irlap, (FREE_FUNC) __irlap_close);
+}
+
+/*
+ * Function irlap_open (driver)
+ *
+ * Initialize IrLAP layer
+ *
+ */
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+ const char *hw_name)
+{
+ struct irlap_cb *self;
+
+ /* Initialize the irlap structure. */
+ self = kzalloc(sizeof(struct irlap_cb), GFP_KERNEL);
+ if (self == NULL)
+ return NULL;
+
+ self->magic = LAP_MAGIC;
+
+ /* Make a binding between the layers */
+ self->netdev = dev;
+ self->qos_dev = qos;
+ /* Copy hardware name */
+ if(hw_name != NULL) {
+ strlcpy(self->hw_name, hw_name, sizeof(self->hw_name));
+ } else {
+ self->hw_name[0] = '\0';
+ }
+
+ /* FIXME: should we get our own field? */
+ dev->atalk_ptr = self;
+
+ self->state = LAP_OFFLINE;
+
+ /* Initialize transmit queue */
+ skb_queue_head_init(&self->txq);
+ skb_queue_head_init(&self->txq_ultra);
+ skb_queue_head_init(&self->wx_list);
+
+ /* My unique IrLAP device address! */
+ /* We don't want the broadcast address, neither the NULL address
+ * (most often used to signify "invalid"), and we don't want an
+ * address already in use (otherwise connect won't be able
+ * to select the proper link). - Jean II */
+ do {
+ get_random_bytes(&self->saddr, sizeof(self->saddr));
+ } while ((self->saddr == 0x0) || (self->saddr == BROADCAST) ||
+ (hashbin_lock_find(irlap, self->saddr, NULL)) );
+ /* Copy to the driver */
+ memcpy(dev->dev_addr, &self->saddr, 4);
+
+ init_timer(&self->slot_timer);
+ init_timer(&self->query_timer);
+ init_timer(&self->discovery_timer);
+ init_timer(&self->final_timer);
+ init_timer(&self->poll_timer);
+ init_timer(&self->wd_timer);
+ init_timer(&self->backoff_timer);
+ init_timer(&self->media_busy_timer);
+
+ irlap_apply_default_connection_parameters(self);
+
+ self->N3 = 3; /* # connections attempts to try before giving up */
+
+ self->state = LAP_NDM;
+
+ hashbin_insert(irlap, (irda_queue_t *) self, self->saddr, NULL);
+
+ irlmp_register_link(self, self->saddr, &self->notify);
+
+ return self;
+}
+EXPORT_SYMBOL(irlap_open);
+
+/*
+ * Function __irlap_close (self)
+ *
+ * Remove IrLAP and all allocated memory. Stop any pending timers.
+ *
+ */
+static void __irlap_close(struct irlap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Stop timers */
+ del_timer(&self->slot_timer);
+ del_timer(&self->query_timer);
+ del_timer(&self->discovery_timer);
+ del_timer(&self->final_timer);
+ del_timer(&self->poll_timer);
+ del_timer(&self->wd_timer);
+ del_timer(&self->backoff_timer);
+ del_timer(&self->media_busy_timer);
+
+ irlap_flush_all_queues(self);
+
+ self->magic = 0;
+
+ kfree(self);
+}
+
+/*
+ * Function irlap_close (self)
+ *
+ * Remove IrLAP instance
+ *
+ */
+void irlap_close(struct irlap_cb *self)
+{
+ struct irlap_cb *lap;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* We used to send a LAP_DISC_INDICATION here, but this was
+ * racy. This has been move within irlmp_unregister_link()
+ * itself. Jean II */
+
+ /* Kill the LAP and all LSAPs on top of it */
+ irlmp_unregister_link(self->saddr);
+ self->notify.instance = NULL;
+
+ /* Be sure that we manage to remove ourself from the hash */
+ lap = hashbin_remove(irlap, self->saddr, NULL);
+ if (!lap) {
+ pr_debug("%s(), Didn't find myself!\n", __func__);
+ return;
+ }
+ __irlap_close(lap);
+}
+EXPORT_SYMBOL(irlap_close);
+
+/*
+ * Function irlap_connect_indication (self, skb)
+ *
+ * Another device is attempting to make a connection
+ *
+ */
+void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_init_qos_capabilities(self, NULL); /* No user QoS! */
+
+ irlmp_link_connect_indication(self->notify.instance, self->saddr,
+ self->daddr, &self->qos_tx, skb);
+}
+
+/*
+ * Function irlap_connect_response (self, skb)
+ *
+ * Service user has accepted incoming connection
+ *
+ */
+void irlap_connect_response(struct irlap_cb *self, struct sk_buff *userdata)
+{
+ irlap_do_event(self, CONNECT_RESPONSE, userdata, NULL);
+}
+
+/*
+ * Function irlap_connect_request (self, daddr, qos_user, sniff)
+ *
+ * Request connection with another device, sniffing is not implemented
+ * yet.
+ *
+ */
+void irlap_connect_request(struct irlap_cb *self, __u32 daddr,
+ struct qos_info *qos_user, int sniff)
+{
+ pr_debug("%s(), daddr=0x%08x\n", __func__, daddr);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ self->daddr = daddr;
+
+ /*
+ * If the service user specifies QoS values for this connection,
+ * then use them
+ */
+ irlap_init_qos_capabilities(self, qos_user);
+
+ if ((self->state == LAP_NDM) && !self->media_busy)
+ irlap_do_event(self, CONNECT_REQUEST, NULL, NULL);
+ else
+ self->connect_pending = TRUE;
+}
+
+/*
+ * Function irlap_connect_confirm (self, skb)
+ *
+ * Connection request has been accepted
+ *
+ */
+void irlap_connect_confirm(struct irlap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlmp_link_connect_confirm(self->notify.instance, &self->qos_tx, skb);
+}
+
+/*
+ * Function irlap_data_indication (self, skb)
+ *
+ * Received data frames from IR-port, so we just pass them up to
+ * IrLMP for further processing
+ *
+ */
+void irlap_data_indication(struct irlap_cb *self, struct sk_buff *skb,
+ int unreliable)
+{
+ /* Hide LAP header from IrLMP layer */
+ skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+ irlmp_link_data_indication(self->notify.instance, skb, unreliable);
+}
+
+
+/*
+ * Function irlap_data_request (self, skb)
+ *
+ * Queue data for transmission, must wait until XMIT state
+ *
+ */
+void irlap_data_request(struct irlap_cb *self, struct sk_buff *skb,
+ int unreliable)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER),
+ return;);
+ skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+ /*
+ * Must set frame format now so that the rest of the code knows
+ * if its dealing with an I or an UI frame
+ */
+ if (unreliable)
+ skb->data[1] = UI_FRAME;
+ else
+ skb->data[1] = I_FRAME;
+
+ /* Don't forget to refcount it - see irlmp_connect_request(). */
+ skb_get(skb);
+
+ /* Add at the end of the queue (keep ordering) - Jean II */
+ skb_queue_tail(&self->txq, skb);
+
+ /*
+ * Send event if this frame only if we are in the right state
+ * FIXME: udata should be sent first! (skb_queue_head?)
+ */
+ if ((self->state == LAP_XMIT_P) || (self->state == LAP_XMIT_S)) {
+ /* If we are not already processing the Tx queue, trigger
+ * transmission immediately - Jean II */
+ if((skb_queue_len(&self->txq) <= 1) && (!self->local_busy))
+ irlap_do_event(self, DATA_REQUEST, skb, NULL);
+ /* Otherwise, the packets will be sent normally at the
+ * next pf-poll - Jean II */
+ }
+}
+
+/*
+ * Function irlap_unitdata_request (self, skb)
+ *
+ * Send Ultra data. This is data that must be sent outside any connection
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_request(struct irlap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER),
+ return;);
+ skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+ skb->data[0] = CBROADCAST;
+ skb->data[1] = UI_FRAME;
+
+ /* Don't need to refcount, see irlmp_connless_data_request() */
+
+ skb_queue_tail(&self->txq_ultra, skb);
+
+ irlap_do_event(self, SEND_UI_FRAME, NULL, NULL);
+}
+#endif /*CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlap_udata_indication (self, skb)
+ *
+ * Receive Ultra data. This is data that is received outside any connection
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_indication(struct irlap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Hide LAP header from IrLMP layer */
+ skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+ irlmp_link_unitdata_indication(self->notify.instance, skb);
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlap_disconnect_request (void)
+ *
+ * Request to disconnect connection by service user
+ */
+void irlap_disconnect_request(struct irlap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Don't disconnect until all data frames are successfully sent */
+ if (!skb_queue_empty(&self->txq)) {
+ self->disconnect_pending = TRUE;
+ return;
+ }
+
+ /* Check if we are in the right state for disconnecting */
+ switch (self->state) {
+ case LAP_XMIT_P: /* FALLTHROUGH */
+ case LAP_XMIT_S: /* FALLTHROUGH */
+ case LAP_CONN: /* FALLTHROUGH */
+ case LAP_RESET_WAIT: /* FALLTHROUGH */
+ case LAP_RESET_CHECK:
+ irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL);
+ break;
+ default:
+ pr_debug("%s(), disconnect pending!\n", __func__);
+ self->disconnect_pending = TRUE;
+ break;
+ }
+}
+
+/*
+ * Function irlap_disconnect_indication (void)
+ *
+ * Disconnect request from other device
+ *
+ */
+void irlap_disconnect_indication(struct irlap_cb *self, LAP_REASON reason)
+{
+ pr_debug("%s(), reason=%s\n", __func__, lap_reasons[reason]);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Flush queues */
+ irlap_flush_all_queues(self);
+
+ switch (reason) {
+ case LAP_RESET_INDICATION:
+ pr_debug("%s(), Sending reset request!\n", __func__);
+ irlap_do_event(self, RESET_REQUEST, NULL, NULL);
+ break;
+ case LAP_NO_RESPONSE: /* FALLTHROUGH */
+ case LAP_DISC_INDICATION: /* FALLTHROUGH */
+ case LAP_FOUND_NONE: /* FALLTHROUGH */
+ case LAP_MEDIA_BUSY:
+ irlmp_link_disconnect_indication(self->notify.instance, self,
+ reason, NULL);
+ break;
+ default:
+ net_err_ratelimited("%s: Unknown reason %d\n",
+ __func__, reason);
+ }
+}
+
+/*
+ * Function irlap_discovery_request (gen_addr_bit)
+ *
+ * Start one single discovery operation.
+ *
+ */
+void irlap_discovery_request(struct irlap_cb *self, discovery_t *discovery)
+{
+ struct irlap_info info;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(discovery != NULL, return;);
+
+ pr_debug("%s(), nslots = %d\n", __func__, discovery->nslots);
+
+ IRDA_ASSERT((discovery->nslots == 1) || (discovery->nslots == 6) ||
+ (discovery->nslots == 8) || (discovery->nslots == 16),
+ return;);
+
+ /* Discovery is only possible in NDM mode */
+ if (self->state != LAP_NDM) {
+ pr_debug("%s(), discovery only possible in NDM mode\n",
+ __func__);
+ irlap_discovery_confirm(self, NULL);
+ /* Note : in theory, if we are not in NDM, we could postpone
+ * the discovery like we do for connection request.
+ * In practice, it's not worth it. If the media was busy,
+ * it's likely next time around it won't be busy. If we are
+ * in REPLY state, we will get passive discovery info & event.
+ * Jean II */
+ return;
+ }
+
+ /* Check if last discovery request finished in time, or if
+ * it was aborted due to the media busy flag. */
+ if (self->discovery_log != NULL) {
+ hashbin_delete(self->discovery_log, (FREE_FUNC) kfree);
+ self->discovery_log = NULL;
+ }
+
+ /* All operations will occur at predictable time, no need to lock */
+ self->discovery_log = hashbin_new(HB_NOLOCK);
+
+ if (self->discovery_log == NULL) {
+ net_warn_ratelimited("%s(), Unable to allocate discovery log!\n",
+ __func__);
+ return;
+ }
+
+ info.S = discovery->nslots; /* Number of slots */
+ info.s = 0; /* Current slot */
+
+ self->discovery_cmd = discovery;
+ info.discovery = discovery;
+
+ /* sysctl_slot_timeout bounds are checked in irsysctl.c - Jean II */
+ self->slot_timeout = msecs_to_jiffies(sysctl_slot_timeout);
+
+ irlap_do_event(self, DISCOVERY_REQUEST, NULL, &info);
+}
+
+/*
+ * Function irlap_discovery_confirm (log)
+ *
+ * A device has been discovered in front of this station, we
+ * report directly to LMP.
+ */
+void irlap_discovery_confirm(struct irlap_cb *self, hashbin_t *discovery_log)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ IRDA_ASSERT(self->notify.instance != NULL, return;);
+
+ /*
+ * Check for successful discovery, since we are then allowed to clear
+ * the media busy condition (IrLAP 6.13.4 - p.94). This should allow
+ * us to make connection attempts much faster and easier (i.e. no
+ * collisions).
+ * Setting media busy to false will also generate an event allowing
+ * to process pending events in NDM state machine.
+ * Note : the spec doesn't define what's a successful discovery is.
+ * If we want Ultra to work, it's successful even if there is
+ * nobody discovered - Jean II
+ */
+ if (discovery_log)
+ irda_device_set_media_busy(self->netdev, FALSE);
+
+ /* Inform IrLMP */
+ irlmp_link_discovery_confirm(self->notify.instance, discovery_log);
+}
+
+/*
+ * Function irlap_discovery_indication (log)
+ *
+ * Somebody is trying to discover us!
+ *
+ */
+void irlap_discovery_indication(struct irlap_cb *self, discovery_t *discovery)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(discovery != NULL, return;);
+
+ IRDA_ASSERT(self->notify.instance != NULL, return;);
+
+ /* A device is very likely to connect immediately after it performs
+ * a successful discovery. This means that in our case, we are much
+ * more likely to receive a connection request over the medium.
+ * So, we backoff to avoid collisions.
+ * IrLAP spec 6.13.4 suggest 100ms...
+ * Note : this little trick actually make a *BIG* difference. If I set
+ * my Linux box with discovery enabled and one Ultra frame sent every
+ * second, my Palm has no trouble connecting to it every time !
+ * Jean II */
+ irda_device_set_media_busy(self->netdev, SMALL);
+
+ irlmp_link_discovery_indication(self->notify.instance, discovery);
+}
+
+/*
+ * Function irlap_status_indication (quality_of_link)
+ */
+void irlap_status_indication(struct irlap_cb *self, int quality_of_link)
+{
+ switch (quality_of_link) {
+ case STATUS_NO_ACTIVITY:
+ net_info_ratelimited("IrLAP, no activity on link!\n");
+ break;
+ case STATUS_NOISY:
+ net_info_ratelimited("IrLAP, noisy link!\n");
+ break;
+ default:
+ break;
+ }
+ irlmp_status_indication(self->notify.instance,
+ quality_of_link, LOCK_NO_CHANGE);
+}
+
+/*
+ * Function irlap_reset_indication (void)
+ */
+void irlap_reset_indication(struct irlap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ if (self->state == LAP_RESET_WAIT)
+ irlap_do_event(self, RESET_REQUEST, NULL, NULL);
+ else
+ irlap_do_event(self, RESET_RESPONSE, NULL, NULL);
+}
+
+/*
+ * Function irlap_reset_confirm (void)
+ */
+void irlap_reset_confirm(void)
+{
+}
+
+/*
+ * Function irlap_generate_rand_time_slot (S, s)
+ *
+ * Generate a random time slot between s and S-1 where
+ * S = Number of slots (0 -> S-1)
+ * s = Current slot
+ */
+int irlap_generate_rand_time_slot(int S, int s)
+{
+ static int rand;
+ int slot;
+
+ IRDA_ASSERT((S - s) > 0, return 0;);
+
+ rand += jiffies;
+ rand ^= (rand << 12);
+ rand ^= (rand >> 20);
+
+ slot = s + rand % (S-s);
+
+ IRDA_ASSERT((slot >= s) || (slot < S), return 0;);
+
+ return slot;
+}
+
+/*
+ * Function irlap_update_nr_received (nr)
+ *
+ * Remove all acknowledged frames in current window queue. This code is
+ * not intuitive and you should not try to change it. If you think it
+ * contains bugs, please mail a patch to the author instead.
+ */
+void irlap_update_nr_received(struct irlap_cb *self, int nr)
+{
+ struct sk_buff *skb = NULL;
+ int count = 0;
+
+ /*
+ * Remove all the ack-ed frames from the window queue.
+ */
+
+ /*
+ * Optimize for the common case. It is most likely that the receiver
+ * will acknowledge all the frames we have sent! So in that case we
+ * delete all frames stored in window.
+ */
+ if (nr == self->vs) {
+ while ((skb = skb_dequeue(&self->wx_list)) != NULL) {
+ dev_kfree_skb(skb);
+ }
+ /* The last acked frame is the next to send minus one */
+ self->va = nr - 1;
+ } else {
+ /* Remove all acknowledged frames in current window */
+ while ((skb_peek(&self->wx_list) != NULL) &&
+ (((self->va+1) % 8) != nr))
+ {
+ skb = skb_dequeue(&self->wx_list);
+ dev_kfree_skb(skb);
+
+ self->va = (self->va + 1) % 8;
+ count++;
+ }
+ }
+
+ /* Advance window */
+ self->window = self->window_size - skb_queue_len(&self->wx_list);
+}
+
+/*
+ * Function irlap_validate_ns_received (ns)
+ *
+ * Validate the next to send (ns) field from received frame.
+ */
+int irlap_validate_ns_received(struct irlap_cb *self, int ns)
+{
+ /* ns as expected? */
+ if (ns == self->vr)
+ return NS_EXPECTED;
+ /*
+ * Stations are allowed to treat invalid NS as unexpected NS
+ * IrLAP, Recv ... with-invalid-Ns. p. 84
+ */
+ return NS_UNEXPECTED;
+
+ /* return NR_INVALID; */
+}
+/*
+ * Function irlap_validate_nr_received (nr)
+ *
+ * Validate the next to receive (nr) field from received frame.
+ *
+ */
+int irlap_validate_nr_received(struct irlap_cb *self, int nr)
+{
+ /* nr as expected? */
+ if (nr == self->vs) {
+ pr_debug("%s(), expected!\n", __func__);
+ return NR_EXPECTED;
+ }
+
+ /*
+ * unexpected nr? (but within current window), first we check if the
+ * ns numbers of the frames in the current window wrap.
+ */
+ if (self->va < self->vs) {
+ if ((nr >= self->va) && (nr <= self->vs))
+ return NR_UNEXPECTED;
+ } else {
+ if ((nr >= self->va) || (nr <= self->vs))
+ return NR_UNEXPECTED;
+ }
+
+ /* Invalid nr! */
+ return NR_INVALID;
+}
+
+/*
+ * Function irlap_initiate_connection_state ()
+ *
+ * Initialize the connection state parameters
+ *
+ */
+void irlap_initiate_connection_state(struct irlap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Next to send and next to receive */
+ self->vs = self->vr = 0;
+
+ /* Last frame which got acked (0 - 1) % 8 */
+ self->va = 7;
+
+ self->window = 1;
+
+ self->remote_busy = FALSE;
+ self->retry_count = 0;
+}
+
+/*
+ * Function irlap_wait_min_turn_around (self, qos)
+ *
+ * Wait negotiated minimum turn around time, this function actually sets
+ * the number of BOS's that must be sent before the next transmitted
+ * frame in order to delay for the specified amount of time. This is
+ * done to avoid using timers, and the forbidden udelay!
+ */
+void irlap_wait_min_turn_around(struct irlap_cb *self, struct qos_info *qos)
+{
+ __u32 min_turn_time;
+ __u32 speed;
+
+ /* Get QoS values. */
+ speed = qos->baud_rate.value;
+ min_turn_time = qos->min_turn_time.value;
+
+ /* No need to calculate XBOFs for speeds over 115200 bps */
+ if (speed > 115200) {
+ self->mtt_required = min_turn_time;
+ return;
+ }
+
+ /*
+ * Send additional BOF's for the next frame for the requested
+ * min turn time, so now we must calculate how many chars (XBOF's) we
+ * must send for the requested time period (min turn time)
+ */
+ self->xbofs_delay = irlap_min_turn_time_in_bytes(speed, min_turn_time);
+}
+
+/*
+ * Function irlap_flush_all_queues (void)
+ *
+ * Flush all queues
+ *
+ */
+void irlap_flush_all_queues(struct irlap_cb *self)
+{
+ struct sk_buff* skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Free transmission queue */
+ while ((skb = skb_dequeue(&self->txq)) != NULL)
+ dev_kfree_skb(skb);
+
+ while ((skb = skb_dequeue(&self->txq_ultra)) != NULL)
+ dev_kfree_skb(skb);
+
+ /* Free sliding window buffered packets */
+ while ((skb = skb_dequeue(&self->wx_list)) != NULL)
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function irlap_setspeed (self, speed)
+ *
+ * Change the speed of the IrDA port
+ *
+ */
+static void irlap_change_speed(struct irlap_cb *self, __u32 speed, int now)
+{
+ struct sk_buff *skb;
+
+ pr_debug("%s(), setting speed to %d\n", __func__, speed);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ self->speed = speed;
+
+ /* Change speed now, or just piggyback speed on frames */
+ if (now) {
+ /* Send down empty frame to trigger speed change */
+ skb = alloc_skb(0, GFP_ATOMIC);
+ if (skb)
+ irlap_queue_xmit(self, skb);
+ }
+}
+
+/*
+ * Function irlap_init_qos_capabilities (self, qos)
+ *
+ * Initialize QoS for this IrLAP session, What we do is to compute the
+ * intersection of the QoS capabilities for the user, driver and for
+ * IrLAP itself. Normally, IrLAP will not specify any values, but it can
+ * be used to restrict certain values.
+ */
+static void irlap_init_qos_capabilities(struct irlap_cb *self,
+ struct qos_info *qos_user)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(self->netdev != NULL, return;);
+
+ /* Start out with the maximum QoS support possible */
+ irda_init_max_qos_capabilies(&self->qos_rx);
+
+ /* Apply drivers QoS capabilities */
+ irda_qos_compute_intersection(&self->qos_rx, self->qos_dev);
+
+ /*
+ * Check for user supplied QoS parameters. The service user is only
+ * allowed to supply these values. We check each parameter since the
+ * user may not have set all of them.
+ */
+ if (qos_user) {
+ pr_debug("%s(), Found user specified QoS!\n", __func__);
+
+ if (qos_user->baud_rate.bits)
+ self->qos_rx.baud_rate.bits &= qos_user->baud_rate.bits;
+
+ if (qos_user->max_turn_time.bits)
+ self->qos_rx.max_turn_time.bits &= qos_user->max_turn_time.bits;
+ if (qos_user->data_size.bits)
+ self->qos_rx.data_size.bits &= qos_user->data_size.bits;
+
+ if (qos_user->link_disc_time.bits)
+ self->qos_rx.link_disc_time.bits &= qos_user->link_disc_time.bits;
+ }
+
+ /* Use 500ms in IrLAP for now */
+ self->qos_rx.max_turn_time.bits &= 0x01;
+
+ /* Set data size */
+ /*self->qos_rx.data_size.bits &= 0x03;*/
+
+ irda_qos_bits_to_value(&self->qos_rx);
+}
+
+/*
+ * Function irlap_apply_default_connection_parameters (void, now)
+ *
+ * Use the default connection and transmission parameters
+ */
+void irlap_apply_default_connection_parameters(struct irlap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* xbofs : Default value in NDM */
+ self->next_bofs = 12;
+ self->bofs_count = 12;
+
+ /* NDM Speed is 9600 */
+ irlap_change_speed(self, 9600, TRUE);
+
+ /* Set mbusy when going to NDM state */
+ irda_device_set_media_busy(self->netdev, TRUE);
+
+ /*
+ * Generate random connection address for this session, which must
+ * be 7 bits wide and different from 0x00 and 0xfe
+ */
+ while ((self->caddr == 0x00) || (self->caddr == 0xfe)) {
+ get_random_bytes(&self->caddr, sizeof(self->caddr));
+ self->caddr &= 0xfe;
+ }
+
+ /* Use default values until connection has been negitiated */
+ self->slot_timeout = sysctl_slot_timeout;
+ self->final_timeout = FINAL_TIMEOUT;
+ self->poll_timeout = POLL_TIMEOUT;
+ self->wd_timeout = WD_TIMEOUT;
+
+ /* Set some default values */
+ self->qos_tx.baud_rate.value = 9600;
+ self->qos_rx.baud_rate.value = 9600;
+ self->qos_tx.max_turn_time.value = 0;
+ self->qos_rx.max_turn_time.value = 0;
+ self->qos_tx.min_turn_time.value = 0;
+ self->qos_rx.min_turn_time.value = 0;
+ self->qos_tx.data_size.value = 64;
+ self->qos_rx.data_size.value = 64;
+ self->qos_tx.window_size.value = 1;
+ self->qos_rx.window_size.value = 1;
+ self->qos_tx.additional_bofs.value = 12;
+ self->qos_rx.additional_bofs.value = 12;
+ self->qos_tx.link_disc_time.value = 0;
+ self->qos_rx.link_disc_time.value = 0;
+
+ irlap_flush_all_queues(self);
+
+ self->disconnect_pending = FALSE;
+ self->connect_pending = FALSE;
+}
+
+/*
+ * Function irlap_apply_connection_parameters (qos, now)
+ *
+ * Initialize IrLAP with the negotiated QoS values
+ *
+ * If 'now' is false, the speed and xbofs will be changed after the next
+ * frame is sent.
+ * If 'now' is true, the speed and xbofs is changed immediately
+ */
+void irlap_apply_connection_parameters(struct irlap_cb *self, int now)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Set the negotiated xbofs value */
+ self->next_bofs = self->qos_tx.additional_bofs.value;
+ if (now)
+ self->bofs_count = self->next_bofs;
+
+ /* Set the negotiated link speed (may need the new xbofs value) */
+ irlap_change_speed(self, self->qos_tx.baud_rate.value, now);
+
+ self->window_size = self->qos_tx.window_size.value;
+ self->window = self->qos_tx.window_size.value;
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ /*
+ * Calculate how many bytes it is possible to transmit before the
+ * link must be turned around
+ */
+ self->line_capacity =
+ irlap_max_line_capacity(self->qos_tx.baud_rate.value,
+ self->qos_tx.max_turn_time.value);
+ self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+
+ /*
+ * Initialize timeout values, some of the rules are listed on
+ * page 92 in IrLAP.
+ */
+ IRDA_ASSERT(self->qos_tx.max_turn_time.value != 0, return;);
+ IRDA_ASSERT(self->qos_rx.max_turn_time.value != 0, return;);
+ /* The poll timeout applies only to the primary station.
+ * It defines the maximum time the primary stay in XMIT mode
+ * before timeout and turning the link around (sending a RR).
+ * Or, this is how much we can keep the pf bit in primary mode.
+ * Therefore, it must be lower or equal than our *OWN* max turn around.
+ * Jean II */
+ self->poll_timeout = msecs_to_jiffies(
+ self->qos_tx.max_turn_time.value);
+ /* The Final timeout applies only to the primary station.
+ * It defines the maximum time the primary wait (mostly in RECV mode)
+ * for an answer from the secondary station before polling it again.
+ * Therefore, it must be greater or equal than our *PARTNER*
+ * max turn around time - Jean II */
+ self->final_timeout = msecs_to_jiffies(
+ self->qos_rx.max_turn_time.value);
+ /* The Watchdog Bit timeout applies only to the secondary station.
+ * It defines the maximum time the secondary wait (mostly in RECV mode)
+ * for poll from the primary station before getting annoyed.
+ * Therefore, it must be greater or equal than our *PARTNER*
+ * max turn around time - Jean II */
+ self->wd_timeout = self->final_timeout * 2;
+
+ /*
+ * N1 and N2 are maximum retry count for *both* the final timer
+ * and the wd timer (with a factor 2) as defined above.
+ * After N1 retry of a timer, we give a warning to the user.
+ * After N2 retry, we consider the link dead and disconnect it.
+ * Jean II
+ */
+
+ /*
+ * Set N1 to 0 if Link Disconnect/Threshold Time = 3 and set it to
+ * 3 seconds otherwise. See page 71 in IrLAP for more details.
+ * Actually, it's not always 3 seconds, as we allow to set
+ * it via sysctl... Max maxtt is 500ms, and N1 need to be multiple
+ * of 2, so 1 second is minimum we can allow. - Jean II
+ */
+ if (self->qos_tx.link_disc_time.value == sysctl_warn_noreply_time)
+ /*
+ * If we set N1 to 0, it will trigger immediately, which is
+ * not what we want. What we really want is to disable it,
+ * Jean II
+ */
+ self->N1 = -2; /* Disable - Need to be multiple of 2*/
+ else
+ self->N1 = sysctl_warn_noreply_time * 1000 /
+ self->qos_rx.max_turn_time.value;
+
+ pr_debug("Setting N1 = %d\n", self->N1);
+
+ /* Set N2 to match our own disconnect time */
+ self->N2 = self->qos_tx.link_disc_time.value * 1000 /
+ self->qos_rx.max_turn_time.value;
+ pr_debug("Setting N2 = %d\n", self->N2);
+}
+
+#ifdef CONFIG_PROC_FS
+struct irlap_iter_state {
+ int id;
+};
+
+static void *irlap_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct irlap_iter_state *iter = seq->private;
+ struct irlap_cb *self;
+
+ /* Protect our access to the tsap list */
+ spin_lock_irq(&irlap->hb_spinlock);
+ iter->id = 0;
+
+ for (self = (struct irlap_cb *) hashbin_get_first(irlap);
+ self; self = (struct irlap_cb *) hashbin_get_next(irlap)) {
+ if (iter->id == *pos)
+ break;
+ ++iter->id;
+ }
+
+ return self;
+}
+
+static void *irlap_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct irlap_iter_state *iter = seq->private;
+
+ ++*pos;
+ ++iter->id;
+ return (void *) hashbin_get_next(irlap);
+}
+
+static void irlap_seq_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_irq(&irlap->hb_spinlock);
+}
+
+static int irlap_seq_show(struct seq_file *seq, void *v)
+{
+ const struct irlap_iter_state *iter = seq->private;
+ const struct irlap_cb *self = v;
+
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -EINVAL;);
+
+ seq_printf(seq, "irlap%d ", iter->id);
+ seq_printf(seq, "state: %s\n",
+ irlap_state[self->state]);
+
+ seq_printf(seq, " device name: %s, ",
+ (self->netdev) ? self->netdev->name : "bug");
+ seq_printf(seq, "hardware name: %s\n", self->hw_name);
+
+ seq_printf(seq, " caddr: %#02x, ", self->caddr);
+ seq_printf(seq, "saddr: %#08x, ", self->saddr);
+ seq_printf(seq, "daddr: %#08x\n", self->daddr);
+
+ seq_printf(seq, " win size: %d, ",
+ self->window_size);
+ seq_printf(seq, "win: %d, ", self->window);
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ seq_printf(seq, "line capacity: %d, ",
+ self->line_capacity);
+ seq_printf(seq, "bytes left: %d\n", self->bytes_left);
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ seq_printf(seq, " tx queue len: %d ",
+ skb_queue_len(&self->txq));
+ seq_printf(seq, "win queue len: %d ",
+ skb_queue_len(&self->wx_list));
+ seq_printf(seq, "rbusy: %s", self->remote_busy ?
+ "TRUE" : "FALSE");
+ seq_printf(seq, " mbusy: %s\n", self->media_busy ?
+ "TRUE" : "FALSE");
+
+ seq_printf(seq, " retrans: %d ", self->retry_count);
+ seq_printf(seq, "vs: %d ", self->vs);
+ seq_printf(seq, "vr: %d ", self->vr);
+ seq_printf(seq, "va: %d\n", self->va);
+
+ seq_printf(seq, " qos\tbps\tmaxtt\tdsize\twinsize\taddbofs\tmintt\tldisc\tcomp\n");
+
+ seq_printf(seq, " tx\t%d\t",
+ self->qos_tx.baud_rate.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.max_turn_time.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.data_size.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.window_size.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.additional_bofs.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.min_turn_time.value);
+ seq_printf(seq, "%d\t",
+ self->qos_tx.link_disc_time.value);
+ seq_printf(seq, "\n");
+
+ seq_printf(seq, " rx\t%d\t",
+ self->qos_rx.baud_rate.value);
+ seq_printf(seq, "%d\t",
+ self->qos_rx.max_turn_time.value);
+ seq_printf(seq, "%d\t",
+ self->qos_rx.data_size.value);
+ seq_printf(seq, "%d\t",
+ self->qos_rx.window_size.value);
+ seq_printf(seq, "%d\t",
+ self->qos_rx.additional_bofs.value);
+ seq_printf(seq, "%d\t",
+ self->qos_rx.min_turn_time.value);
+ seq_printf(seq, "%d\n",
+ self->qos_rx.link_disc_time.value);
+
+ return 0;
+}
+
+static const struct seq_operations irlap_seq_ops = {
+ .start = irlap_seq_start,
+ .next = irlap_seq_next,
+ .stop = irlap_seq_stop,
+ .show = irlap_seq_show,
+};
+
+static int irlap_seq_open(struct inode *inode, struct file *file)
+{
+ if (irlap == NULL)
+ return -EINVAL;
+
+ return seq_open_private(file, &irlap_seq_ops,
+ sizeof(struct irlap_iter_state));
+}
+
+const struct file_operations irlap_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = irlap_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_private,
+};
+
+#endif /* CONFIG_PROC_FS */
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
new file mode 100644
index 000000000..0e1b4d79f
--- /dev/null
+++ b/net/irda/irlap_event.c
@@ -0,0 +1,2316 @@
+/*********************************************************************
+ *
+ * Filename: irlap_event.c
+ * Version: 0.9
+ * Description: IrLAP state machine implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dag@brattli.net>
+ * Created at: Sat Aug 16 00:59:29 1997
+ * Modified at: Sat Dec 25 21:07:57 1999
+ * Modified by: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>,
+ * Copyright (c) 1998 Thomas Davis <ratbert@radiks.net>
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap_event.h>
+
+#include <net/irda/timer.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/qos.h>
+#include <net/irda/parameters.h>
+#include <net/irda/irlmp.h> /* irlmp_flow_indication(), ... */
+
+#include <net/irda/irda_device.h>
+
+#ifdef CONFIG_IRDA_FAST_RR
+int sysctl_fast_poll_increase = 50;
+#endif
+
+static int irlap_state_ndm (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_query (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reply (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_conn (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_setup (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_nrm_p (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_nrm_s (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event,
+ struct sk_buff *, struct irlap_info *);
+
+static const char *const irlap_event[] __maybe_unused = {
+ "DISCOVERY_REQUEST",
+ "CONNECT_REQUEST",
+ "CONNECT_RESPONSE",
+ "DISCONNECT_REQUEST",
+ "DATA_REQUEST",
+ "RESET_REQUEST",
+ "RESET_RESPONSE",
+ "SEND_I_CMD",
+ "SEND_UI_FRAME",
+ "RECV_DISCOVERY_XID_CMD",
+ "RECV_DISCOVERY_XID_RSP",
+ "RECV_SNRM_CMD",
+ "RECV_TEST_CMD",
+ "RECV_TEST_RSP",
+ "RECV_UA_RSP",
+ "RECV_DM_RSP",
+ "RECV_RD_RSP",
+ "RECV_I_CMD",
+ "RECV_I_RSP",
+ "RECV_UI_FRAME",
+ "RECV_FRMR_RSP",
+ "RECV_RR_CMD",
+ "RECV_RR_RSP",
+ "RECV_RNR_CMD",
+ "RECV_RNR_RSP",
+ "RECV_REJ_CMD",
+ "RECV_REJ_RSP",
+ "RECV_SREJ_CMD",
+ "RECV_SREJ_RSP",
+ "RECV_DISC_CMD",
+ "SLOT_TIMER_EXPIRED",
+ "QUERY_TIMER_EXPIRED",
+ "FINAL_TIMER_EXPIRED",
+ "POLL_TIMER_EXPIRED",
+ "DISCOVERY_TIMER_EXPIRED",
+ "WD_TIMER_EXPIRED",
+ "BACKOFF_TIMER_EXPIRED",
+ "MEDIA_BUSY_TIMER_EXPIRED",
+};
+
+const char *const irlap_state[] = {
+ "LAP_NDM",
+ "LAP_QUERY",
+ "LAP_REPLY",
+ "LAP_CONN",
+ "LAP_SETUP",
+ "LAP_OFFLINE",
+ "LAP_XMIT_P",
+ "LAP_PCLOSE",
+ "LAP_NRM_P",
+ "LAP_RESET_WAIT",
+ "LAP_RESET",
+ "LAP_NRM_S",
+ "LAP_XMIT_S",
+ "LAP_SCLOSE",
+ "LAP_RESET_CHECK",
+};
+
+static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info) =
+{
+ irlap_state_ndm,
+ irlap_state_query,
+ irlap_state_reply,
+ irlap_state_conn,
+ irlap_state_setup,
+ irlap_state_offline,
+ irlap_state_xmit_p,
+ irlap_state_pclose,
+ irlap_state_nrm_p,
+ irlap_state_reset_wait,
+ irlap_state_reset,
+ irlap_state_nrm_s,
+ irlap_state_xmit_s,
+ irlap_state_sclose,
+ irlap_state_reset_check,
+};
+
+/*
+ * Function irda_poll_timer_expired (data)
+ *
+ * Poll timer has expired. Normally we must now send a RR frame to the
+ * remote device
+ */
+static void irlap_poll_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Calculate and set time before we will have to send back the pf bit
+ * to the peer. Use in primary.
+ * Make sure that state is XMIT_P/XMIT_S when calling this function
+ * (and that nobody messed up with the state). - Jean II
+ */
+static void irlap_start_poll_timer(struct irlap_cb *self, int timeout)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+#ifdef CONFIG_IRDA_FAST_RR
+ /*
+ * Send out the RR frames faster if our own transmit queue is empty, or
+ * if the peer is busy. The effect is a much faster conversation
+ */
+ if (skb_queue_empty(&self->txq) || self->remote_busy) {
+ if (self->fast_RR == TRUE) {
+ /*
+ * Assert that the fast poll timer has not reached the
+ * normal poll timer yet
+ */
+ if (self->fast_RR_timeout < timeout) {
+ /*
+ * FIXME: this should be a more configurable
+ * function
+ */
+ self->fast_RR_timeout +=
+ (sysctl_fast_poll_increase * HZ/1000);
+
+ /* Use this fast(er) timeout instead */
+ timeout = self->fast_RR_timeout;
+ }
+ } else {
+ self->fast_RR = TRUE;
+
+ /* Start with just 0 ms */
+ self->fast_RR_timeout = 0;
+ timeout = 0;
+ }
+ } else
+ self->fast_RR = FALSE;
+
+ pr_debug("%s(), timeout=%d (%ld)\n", __func__, timeout, jiffies);
+#endif /* CONFIG_IRDA_FAST_RR */
+
+ if (timeout == 0)
+ irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
+ else
+ irda_start_timer(&self->poll_timer, timeout, self,
+ irlap_poll_timer_expired);
+}
+
+/*
+ * Function irlap_do_event (event, skb, info)
+ *
+ * Rushes through the state machine without any delay. If state == XMIT
+ * then send queued data frames.
+ */
+void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret;
+
+ if (!self || self->magic != LAP_MAGIC)
+ return;
+
+ pr_debug("%s(), event = %s, state = %s\n", __func__,
+ irlap_event[event], irlap_state[self->state]);
+
+ ret = (*state[self->state])(self, event, skb, info);
+
+ /*
+ * Check if there are any pending events that needs to be executed
+ */
+ switch (self->state) {
+ case LAP_XMIT_P: /* FALLTHROUGH */
+ case LAP_XMIT_S:
+ /*
+ * We just received the pf bit and are at the beginning
+ * of a new LAP transmit window.
+ * Check if there are any queued data frames, and do not
+ * try to disconnect link if we send any data frames, since
+ * that will change the state away form XMIT
+ */
+ pr_debug("%s() : queue len = %d\n", __func__,
+ skb_queue_len(&self->txq));
+
+ if (!skb_queue_empty(&self->txq)) {
+ /* Prevent race conditions with irlap_data_request() */
+ self->local_busy = TRUE;
+
+ /* Theory of operation.
+ * We send frames up to when we fill the window or
+ * reach line capacity. Those frames will queue up
+ * in the device queue, and the driver will slowly
+ * send them.
+ * After each frame that we send, we poll the higher
+ * layer for more data. It's the right time to do
+ * that because the link layer need to perform the mtt
+ * and then send the first frame, so we can afford
+ * to send a bit of time in kernel space.
+ * The explicit flow indication allow to minimise
+ * buffers (== lower latency), to avoid higher layer
+ * polling via timers (== less context switches) and
+ * to implement a crude scheduler - Jean II */
+
+ /* Try to send away all queued data frames */
+ while ((skb = skb_dequeue(&self->txq)) != NULL) {
+ /* Send one frame */
+ ret = (*state[self->state])(self, SEND_I_CMD,
+ skb, NULL);
+ /* Drop reference count.
+ * It will be increase as needed in
+ * irlap_send_data_xxx() */
+ kfree_skb(skb);
+
+ /* Poll the higher layers for one more frame */
+ irlmp_flow_indication(self->notify.instance,
+ FLOW_START);
+
+ if (ret == -EPROTO)
+ break; /* Try again later! */
+ }
+ /* Finished transmitting */
+ self->local_busy = FALSE;
+ } else if (self->disconnect_pending) {
+ self->disconnect_pending = FALSE;
+
+ ret = (*state[self->state])(self, DISCONNECT_REQUEST,
+ NULL, NULL);
+ }
+ break;
+/* case LAP_NDM: */
+/* case LAP_CONN: */
+/* case LAP_RESET_WAIT: */
+/* case LAP_RESET_CHECK: */
+ default:
+ break;
+ }
+}
+
+/*
+ * Function irlap_state_ndm (event, skb, frame)
+ *
+ * NDM (Normal Disconnected Mode) state
+ *
+ */
+static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ discovery_t *discovery_rsp;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case CONNECT_REQUEST:
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+ if (self->media_busy) {
+ /* Note : this will never happen, because we test
+ * media busy in irlap_connect_request() and
+ * postpone the event... - Jean II */
+ pr_debug("%s(), CONNECT_REQUEST: media busy!\n",
+ __func__);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_MEDIA_BUSY);
+ } else {
+ irlap_send_snrm_frame(self, &self->qos_rx);
+
+ /* Start Final-bit timer */
+ irlap_start_final_timer(self, self->final_timeout);
+
+ self->retry_count = 0;
+ irlap_next_state(self, LAP_SETUP);
+ }
+ break;
+ case RECV_SNRM_CMD:
+ /* Check if the frame contains and I field */
+ if (info) {
+ self->daddr = info->daddr;
+ self->caddr = info->caddr;
+
+ irlap_next_state(self, LAP_CONN);
+
+ irlap_connect_indication(self, skb);
+ } else {
+ pr_debug("%s(), SNRM frame does not contain an I field!\n",
+ __func__);
+ }
+ break;
+ case DISCOVERY_REQUEST:
+ IRDA_ASSERT(info != NULL, return -1;);
+
+ if (self->media_busy) {
+ pr_debug("%s(), DISCOVERY_REQUEST: media busy!\n",
+ __func__);
+ /* irlap->log.condition = MEDIA_BUSY; */
+
+ /* This will make IrLMP try again */
+ irlap_discovery_confirm(self, NULL);
+ /* Note : the discovery log is not cleaned up here,
+ * it will be done in irlap_discovery_request()
+ * Jean II */
+ return 0;
+ }
+
+ self->S = info->S;
+ self->s = info->s;
+ irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE,
+ info->discovery);
+ self->frame_sent = FALSE;
+ self->s++;
+
+ irlap_start_slot_timer(self, self->slot_timeout);
+ irlap_next_state(self, LAP_QUERY);
+ break;
+ case RECV_DISCOVERY_XID_CMD:
+ IRDA_ASSERT(info != NULL, return -1;);
+
+ /* Assert that this is not the final slot */
+ if (info->s <= info->S) {
+ self->slot = irlap_generate_rand_time_slot(info->S,
+ info->s);
+ if (self->slot == info->s) {
+ discovery_rsp = irlmp_get_discovery_response();
+ discovery_rsp->data.daddr = info->daddr;
+
+ irlap_send_discovery_xid_frame(self, info->S,
+ self->slot,
+ FALSE,
+ discovery_rsp);
+ self->frame_sent = TRUE;
+ } else
+ self->frame_sent = FALSE;
+
+ /*
+ * Go to reply state until end of discovery to
+ * inhibit our own transmissions. Set the timer
+ * to not stay forever there... Jean II
+ */
+ irlap_start_query_timer(self, info->S, info->s);
+ irlap_next_state(self, LAP_REPLY);
+ } else {
+ /* This is the final slot. How is it possible ?
+ * This would happen is both discoveries are just slightly
+ * offset (if they are in sync, all packets are lost).
+ * Most often, all the discovery requests will be received
+ * in QUERY state (see my comment there), except for the
+ * last frame that will come here.
+ * The big trouble when it happen is that active discovery
+ * doesn't happen, because nobody answer the discoveries
+ * frame of the other guy, so the log shows up empty.
+ * What should we do ?
+ * Not much. It's too late to answer those discovery frames,
+ * so we just pass the info to IrLMP who will put it in the
+ * log (and post an event).
+ * Another cause would be devices that do discovery much
+ * slower than us, however the latest fixes should minimise
+ * those cases...
+ * Jean II
+ */
+ pr_debug("%s(), Receiving final discovery request, missed the discovery slots :-(\n",
+ __func__);
+
+ /* Last discovery request -> in the log */
+ irlap_discovery_indication(self, info->discovery);
+ }
+ break;
+ case MEDIA_BUSY_TIMER_EXPIRED:
+ /* A bunch of events may be postponed because the media is
+ * busy (usually immediately after we close a connection),
+ * or while we are doing discovery (state query/reply).
+ * In all those cases, the media busy flag will be cleared
+ * when it's OK for us to process those postponed events.
+ * This event is not mentioned in the state machines in the
+ * IrLAP spec. It's because they didn't consider Ultra and
+ * postponing connection request is optional.
+ * Jean II */
+#ifdef CONFIG_IRDA_ULTRA
+ /* Send any pending Ultra frames if any */
+ if (!skb_queue_empty(&self->txq_ultra)) {
+ /* We don't send the frame, just post an event.
+ * Also, previously this code was in timer.c...
+ * Jean II */
+ ret = (*state[self->state])(self, SEND_UI_FRAME,
+ NULL, NULL);
+ }
+#endif /* CONFIG_IRDA_ULTRA */
+ /* Check if we should try to connect.
+ * This code was previously in irlap_do_event() */
+ if (self->connect_pending) {
+ self->connect_pending = FALSE;
+
+ /* This one *should* not pend in this state, except
+ * if a socket try to connect and immediately
+ * disconnect. - clear - Jean II */
+ if (self->disconnect_pending)
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ else
+ ret = (*state[self->state])(self,
+ CONNECT_REQUEST,
+ NULL, NULL);
+ self->disconnect_pending = FALSE;
+ }
+ /* Note : one way to test if this code works well (including
+ * media busy and small busy) is to create a user space
+ * application generating an Ultra packet every 3.05 sec (or
+ * 2.95 sec) and to see how it interact with discovery.
+ * It's fairly easy to check that no packet is lost, that the
+ * packets are postponed during discovery and that after
+ * discovery indication you have a 100ms "gap".
+ * As connection request and Ultra are now processed the same
+ * way, this avoid the tedious job of trying IrLAP connection
+ * in all those cases...
+ * Jean II */
+ break;
+#ifdef CONFIG_IRDA_ULTRA
+ case SEND_UI_FRAME:
+ {
+ int i;
+ /* Only allowed to repeat an operation twice */
+ for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) {
+ skb = skb_dequeue(&self->txq_ultra);
+ if (skb)
+ irlap_send_ui_frame(self, skb, CBROADCAST,
+ CMD_FRAME);
+ else
+ break;
+ /* irlap_send_ui_frame() won't increase skb reference
+ * count, so no dev_kfree_skb() - Jean II */
+ }
+ if (i == 2) {
+ /* Force us to listen 500 ms again */
+ irda_device_set_media_busy(self->netdev, TRUE);
+ }
+ break;
+ }
+ case RECV_UI_FRAME:
+ /* Only accept broadcast frames in NDM mode */
+ if (info->caddr != CBROADCAST) {
+ pr_debug("%s(), not a broadcast frame!\n",
+ __func__);
+ } else
+ irlap_unitdata_indication(self, skb);
+ break;
+#endif /* CONFIG_IRDA_ULTRA */
+ case RECV_TEST_CMD:
+ /* Remove test frame header */
+ skb_pull(skb, sizeof(struct test_frame));
+
+ /*
+ * Send response. This skb will not be sent out again, and
+ * will only be used to send out the same info as the cmd
+ */
+ irlap_send_test_frame(self, CBROADCAST, info->daddr, skb);
+ break;
+ case RECV_TEST_RSP:
+ pr_debug("%s() not implemented!\n", __func__);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n", __func__,
+ irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_query (event, skb, info)
+ *
+ * QUERY state
+ *
+ */
+static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case RECV_DISCOVERY_XID_RSP:
+ IRDA_ASSERT(info != NULL, return -1;);
+ IRDA_ASSERT(info->discovery != NULL, return -1;);
+
+ pr_debug("%s(), daddr=%08x\n", __func__,
+ info->discovery->data.daddr);
+
+ if (!self->discovery_log) {
+ net_warn_ratelimited("%s: discovery log is gone! maybe the discovery timeout has been set too short?\n",
+ __func__);
+ break;
+ }
+ hashbin_insert(self->discovery_log,
+ (irda_queue_t *) info->discovery,
+ info->discovery->data.daddr, NULL);
+
+ /* Keep state */
+ /* irlap_next_state(self, LAP_QUERY); */
+
+ break;
+ case RECV_DISCOVERY_XID_CMD:
+ /* Yes, it is possible to receive those frames in this mode.
+ * Note that most often the last discovery request won't
+ * occur here but in NDM state (see my comment there).
+ * What should we do ?
+ * Not much. We are currently performing our own discovery,
+ * therefore we can't answer those frames. We don't want
+ * to change state either. We just pass the info to
+ * IrLMP who will put it in the log (and post an event).
+ * Jean II
+ */
+
+ IRDA_ASSERT(info != NULL, return -1;);
+
+ pr_debug("%s(), Receiving discovery request (s = %d) while performing discovery :-(\n",
+ __func__, info->s);
+
+ /* Last discovery request ? */
+ if (info->s == 0xff)
+ irlap_discovery_indication(self, info->discovery);
+ break;
+ case SLOT_TIMER_EXPIRED:
+ /*
+ * Wait a little longer if we detect an incoming frame. This
+ * is not mentioned in the spec, but is a good thing to do,
+ * since we want to work even with devices that violate the
+ * timing requirements.
+ */
+ if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
+ pr_debug("%s(), device is slow to answer, waiting some more!\n",
+ __func__);
+ irlap_start_slot_timer(self, msecs_to_jiffies(10));
+ self->add_wait = TRUE;
+ return ret;
+ }
+ self->add_wait = FALSE;
+
+ if (self->s < self->S) {
+ irlap_send_discovery_xid_frame(self, self->S,
+ self->s, TRUE,
+ self->discovery_cmd);
+ self->s++;
+ irlap_start_slot_timer(self, self->slot_timeout);
+
+ /* Keep state */
+ irlap_next_state(self, LAP_QUERY);
+ } else {
+ /* This is the final slot! */
+ irlap_send_discovery_xid_frame(self, self->S, 0xff,
+ TRUE,
+ self->discovery_cmd);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ /*
+ * We are now finished with the discovery procedure,
+ * so now we must return the results
+ */
+ irlap_discovery_confirm(self, self->discovery_log);
+
+ /* IrLMP should now have taken care of the log */
+ self->discovery_log = NULL;
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n", __func__,
+ irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_reply (self, event, skb, info)
+ *
+ * REPLY, we have received a XID discovery frame from a device and we
+ * are waiting for the right time slot to send a response XID frame
+ *
+ */
+static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ discovery_t *discovery_rsp;
+ int ret=0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case QUERY_TIMER_EXPIRED:
+ pr_debug("%s(), QUERY_TIMER_EXPIRED <%ld>\n",
+ __func__, jiffies);
+ irlap_next_state(self, LAP_NDM);
+ break;
+ case RECV_DISCOVERY_XID_CMD:
+ IRDA_ASSERT(info != NULL, return -1;);
+ /* Last frame? */
+ if (info->s == 0xff) {
+ del_timer(&self->query_timer);
+
+ /* info->log.condition = REMOTE; */
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_discovery_indication(self, info->discovery);
+ } else {
+ /* If it's our slot, send our reply */
+ if ((info->s >= self->slot) && (!self->frame_sent)) {
+ discovery_rsp = irlmp_get_discovery_response();
+ discovery_rsp->data.daddr = info->daddr;
+
+ irlap_send_discovery_xid_frame(self, info->S,
+ self->slot,
+ FALSE,
+ discovery_rsp);
+
+ self->frame_sent = TRUE;
+ }
+ /* Readjust our timer to accommodate devices
+ * doing faster or slower discovery than us...
+ * Jean II */
+ irlap_start_query_timer(self, info->S, info->s);
+
+ /* Keep state */
+ //irlap_next_state(self, LAP_REPLY);
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d, %s\n", __func__,
+ event, irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_conn (event, skb, info)
+ *
+ * CONN, we have received a SNRM command and is waiting for the upper
+ * layer to accept or refuse connection
+ *
+ */
+static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s(), event=%s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case CONNECT_RESPONSE:
+ skb_pull(skb, sizeof(struct snrm_frame));
+
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+ irlap_qos_negotiate(self, skb);
+
+ irlap_initiate_connection_state(self);
+
+ /*
+ * Applying the parameters now will make sure we change speed
+ * *after* we have sent the next frame
+ */
+ irlap_apply_connection_parameters(self, FALSE);
+
+ /*
+ * Sending this frame will force a speed change after it has
+ * been sent (i.e. the frame will be sent at 9600).
+ */
+ irlap_send_ua_response_frame(self, &self->qos_rx);
+
+#if 0
+ /*
+ * We are allowed to send two frames, but this may increase
+ * the connect latency, so lets not do it for now.
+ */
+ /* This is full of good intentions, but doesn't work in
+ * practice.
+ * After sending the first UA response, we switch the
+ * dongle to the negotiated speed, which is usually
+ * different than 9600 kb/s.
+ * From there, there is two solutions :
+ * 1) The other end has received the first UA response :
+ * it will set up the connection, move to state LAP_NRM_P,
+ * and will ignore and drop the second UA response.
+ * Actually, it's even worse : the other side will almost
+ * immediately send a RR that will likely collide with the
+ * UA response (depending on negotiated turnaround).
+ * 2) The other end has not received the first UA response,
+ * will stay at 9600 and will never see the second UA response.
+ * Jean II */
+ irlap_send_ua_response_frame(self, &self->qos_rx);
+#endif
+
+ /*
+ * The WD-timer could be set to the duration of the P-timer
+ * for this case, but it is recommended to use twice the
+ * value (note 3 IrLAP p. 60).
+ */
+ irlap_start_wd_timer(self, self->wd_timeout);
+ irlap_next_state(self, LAP_NRM_S);
+
+ break;
+ case RECV_DISCOVERY_XID_CMD:
+ pr_debug("%s(), event RECV_DISCOVER_XID_CMD!\n",
+ __func__);
+ irlap_next_state(self, LAP_NDM);
+
+ break;
+ case DISCONNECT_REQUEST:
+ pr_debug("%s(), Disconnect request!\n", __func__);
+ irlap_send_dm_frame(self);
+ irlap_next_state( self, LAP_NDM);
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d, %s\n", __func__,
+ event, irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Function irlap_state_setup (event, skb, frame)
+ *
+ * SETUP state, The local layer has transmitted a SNRM command frame to
+ * a remote peer layer and is awaiting a reply .
+ *
+ */
+static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case FINAL_TIMER_EXPIRED:
+ if (self->retry_count < self->N3) {
+/*
+ * Perform random backoff, Wait a random number of time units, minimum
+ * duration half the time taken to transmitt a SNRM frame, maximum duration
+ * 1.5 times the time taken to transmit a SNRM frame. So this time should
+ * between 15 msecs and 45 msecs.
+ */
+ irlap_start_backoff_timer(self, msecs_to_jiffies(20 +
+ (jiffies % 30)));
+ } else {
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_FOUND_NONE);
+ }
+ break;
+ case BACKOFF_TIMER_EXPIRED:
+ irlap_send_snrm_frame(self, &self->qos_rx);
+ irlap_start_final_timer(self, self->final_timeout);
+ self->retry_count++;
+ break;
+ case RECV_SNRM_CMD:
+ pr_debug("%s(), SNRM battle!\n", __func__);
+
+ IRDA_ASSERT(skb != NULL, return 0;);
+ IRDA_ASSERT(info != NULL, return 0;);
+
+ /*
+ * The device with the largest device address wins the battle
+ * (both have sent a SNRM command!)
+ */
+ if (info &&(info->daddr > self->saddr)) {
+ del_timer(&self->final_timer);
+ irlap_initiate_connection_state(self);
+
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+ skb_pull(skb, sizeof(struct snrm_frame));
+
+ irlap_qos_negotiate(self, skb);
+
+ /* Send UA frame and then change link settings */
+ irlap_apply_connection_parameters(self, FALSE);
+ irlap_send_ua_response_frame(self, &self->qos_rx);
+
+ irlap_next_state(self, LAP_NRM_S);
+ irlap_connect_confirm(self, skb);
+
+ /*
+ * The WD-timer could be set to the duration of the
+ * P-timer for this case, but it is recommended
+ * to use twice the value (note 3 IrLAP p. 60).
+ */
+ irlap_start_wd_timer(self, self->wd_timeout);
+ } else {
+ /* We just ignore the other device! */
+ irlap_next_state(self, LAP_SETUP);
+ }
+ break;
+ case RECV_UA_RSP:
+ /* Stop F-timer */
+ del_timer(&self->final_timer);
+
+ /* Initiate connection state */
+ irlap_initiate_connection_state(self);
+
+ /* Negotiate connection parameters */
+ IRDA_ASSERT(skb->len > 10, return -1;);
+
+ skb_pull(skb, sizeof(struct ua_frame));
+
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+ irlap_qos_negotiate(self, skb);
+
+ /* Set the new link setting *now* (before the rr frame) */
+ irlap_apply_connection_parameters(self, TRUE);
+ self->retry_count = 0;
+
+ /* Wait for turnaround time to give a chance to the other
+ * device to be ready to receive us.
+ * Note : the time to switch speed is typically larger
+ * than the turnaround time, but as we don't have the other
+ * side speed switch time, that's our best guess...
+ * Jean II */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ /* This frame will actually be sent at the new speed */
+ irlap_send_rr_frame(self, CMD_FRAME);
+
+ /* The timer is set to half the normal timer to quickly
+ * detect a failure to negotiate the new connection
+ * parameters. IrLAP 6.11.3.2, note 3.
+ * Note that currently we don't process this failure
+ * properly, as we should do a quick disconnect.
+ * Jean II */
+ irlap_start_final_timer(self, self->final_timeout/2);
+ irlap_next_state(self, LAP_NRM_P);
+
+ irlap_connect_confirm(self, skb);
+ break;
+ case RECV_DM_RSP: /* FALLTHROUGH */
+ case RECV_DISC_CMD:
+ del_timer(&self->final_timer);
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d, %s\n", __func__,
+ event, irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_offline (self, event, skb, info)
+ *
+ * OFFLINE state, not used for now!
+ *
+ */
+static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ pr_debug("%s(), Unknown event\n", __func__);
+
+ return -1;
+}
+
+/*
+ * Function irlap_state_xmit_p (self, event, skb, info)
+ *
+ * XMIT, Only the primary station has right to transmit, and we
+ * therefore do not expect to receive any transmissions from other
+ * stations.
+ *
+ */
+static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ switch (event) {
+ case SEND_I_CMD:
+ /*
+ * Only send frame if send-window > 0.
+ */
+ if ((self->window > 0) && (!self->remote_busy)) {
+ int nextfit;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ struct sk_buff *skb_next;
+
+ /* With DYNAMIC_WINDOW, we keep the window size
+ * maximum, and adapt on the packets we are sending.
+ * At 115k, we can send only 2 packets of 2048 bytes
+ * in a 500 ms turnaround. Without this option, we
+ * would always limit the window to 2. With this
+ * option, if we send smaller packets, we can send
+ * up to 7 of them (always depending on QoS).
+ * Jean II */
+
+ /* Look at the next skb. This is safe, as we are
+ * the only consumer of the Tx queue (if we are not,
+ * we have other problems) - Jean II */
+ skb_next = skb_peek(&self->txq);
+
+ /* Check if a subsequent skb exist and would fit in
+ * the current window (with respect to turnaround
+ * time).
+ * This allow us to properly mark the current packet
+ * with the pf bit, to avoid falling back on the
+ * second test below, and avoid waiting the
+ * end of the window and sending a extra RR.
+ * Note : (skb_next != NULL) <=> (skb_queue_len() > 0)
+ * Jean II */
+ nextfit = ((skb_next != NULL) &&
+ ((skb_next->len + skb->len) <=
+ self->bytes_left));
+
+ /*
+ * The current packet may not fit ! Because of test
+ * above, this should not happen any more !!!
+ * Test if we have transmitted more bytes over the
+ * link than its possible to do with the current
+ * speed and turn-around-time.
+ */
+ if((!nextfit) && (skb->len > self->bytes_left)) {
+ pr_debug("%s(), Not allowed to transmit more bytes!\n",
+ __func__);
+ /* Requeue the skb */
+ skb_queue_head(&self->txq, skb_get(skb));
+ /*
+ * We should switch state to LAP_NRM_P, but
+ * that is not possible since we must be sure
+ * that we poll the other side. Since we have
+ * used up our time, the poll timer should
+ * trigger anyway now, so we just wait for it
+ * DB
+ */
+ /*
+ * Sorry, but that's not totally true. If
+ * we send 2000B packets, we may wait another
+ * 1000B until our turnaround expire. That's
+ * why we need to be proactive in avoiding
+ * coming here. - Jean II
+ */
+ return -EPROTO;
+ }
+
+ /* Subtract space used by this skb */
+ self->bytes_left -= skb->len;
+#else /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ /* Window has been adjusted for the max packet
+ * size, so much simpler... - Jean II */
+ nextfit = !skb_queue_empty(&self->txq);
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ /*
+ * Send data with poll bit cleared only if window > 1
+ * and there is more frames after this one to be sent
+ */
+ if ((self->window > 1) && (nextfit)) {
+ /* More packet to send in current window */
+ irlap_send_data_primary(self, skb);
+ irlap_next_state(self, LAP_XMIT_P);
+ } else {
+ /* Final packet of window */
+ irlap_send_data_primary_poll(self, skb);
+
+ /*
+ * Make sure state machine does not try to send
+ * any more frames
+ */
+ ret = -EPROTO;
+ }
+#ifdef CONFIG_IRDA_FAST_RR
+ /* Peer may want to reply immediately */
+ self->fast_RR = FALSE;
+#endif /* CONFIG_IRDA_FAST_RR */
+ } else {
+ pr_debug("%s(), Unable to send! remote busy?\n",
+ __func__);
+ skb_queue_head(&self->txq, skb_get(skb));
+
+ /*
+ * The next ret is important, because it tells
+ * irlap_next_state _not_ to deliver more frames
+ */
+ ret = -EPROTO;
+ }
+ break;
+ case POLL_TIMER_EXPIRED:
+ pr_debug("%s(), POLL_TIMER_EXPIRED <%ld>\n",
+ __func__, jiffies);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ /* Return to NRM properly - Jean II */
+ self->window = self->window_size;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ /* Allowed to transmit a maximum number of bytes again. */
+ self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ irlap_start_final_timer(self, self->final_timeout);
+ irlap_next_state(self, LAP_NRM_P);
+ break;
+ case DISCONNECT_REQUEST:
+ del_timer(&self->poll_timer);
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_disc_frame(self);
+ irlap_flush_all_queues(self);
+ irlap_start_final_timer(self, self->final_timeout);
+ self->retry_count = 0;
+ irlap_next_state(self, LAP_PCLOSE);
+ break;
+ case DATA_REQUEST:
+ /* Nothing to do, irlap_do_event() will send the packet
+ * when we return... - Jean II */
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlap_event[event]);
+
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_pclose (event, skb, info)
+ *
+ * PCLOSE state
+ */
+static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case RECV_UA_RSP: /* FALLTHROUGH */
+ case RECV_DM_RSP:
+ del_timer(&self->final_timer);
+
+ /* Set new link parameters */
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ case FINAL_TIMER_EXPIRED:
+ if (self->retry_count < self->N3) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_disc_frame(self);
+ irlap_start_final_timer(self, self->final_timeout);
+ self->retry_count++;
+ /* Keep state */
+ } else {
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d\n", __func__, event);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_nrm_p (self, event, skb, info)
+ *
+ * NRM_P (Normal Response Mode as Primary), The primary station has given
+ * permissions to a secondary station to transmit IrLAP resonse frames
+ * (by sending a frame with the P bit set). The primary station will not
+ * transmit any frames and is expecting to receive frames only from the
+ * secondary to which transmission permissions has been given.
+ */
+static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+ int ns_status;
+ int nr_status;
+
+ switch (event) {
+ case RECV_I_RSP: /* Optimize for the common case */
+ if (unlikely(skb->len <= LAP_ADDR_HEADER + LAP_CTRL_HEADER)) {
+ /*
+ * Input validation check: a stir4200/mcp2150
+ * combination sometimes results in an empty i:rsp.
+ * This makes no sense; we can just ignore the frame
+ * and send an rr:cmd immediately. This happens before
+ * changing nr or ns so triggers a retransmit
+ */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ /* Keep state */
+ break;
+ }
+ /* FIXME: must check for remote_busy below */
+#ifdef CONFIG_IRDA_FAST_RR
+ /*
+ * Reset the fast_RR so we can use the fast RR code with
+ * full speed the next time since peer may have more frames
+ * to transmitt
+ */
+ self->fast_RR = FALSE;
+#endif /* CONFIG_IRDA_FAST_RR */
+ IRDA_ASSERT( info != NULL, return -1;);
+
+ ns_status = irlap_validate_ns_received(self, info->ns);
+ nr_status = irlap_validate_nr_received(self, info->nr);
+
+ /*
+ * Check for expected I(nformation) frame
+ */
+ if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
+
+ /* Update Vr (next frame for us to receive) */
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received, cleanup our retry queue */
+ irlap_update_nr_received(self, info->nr);
+
+ /*
+ * Got expected NR, so reset the
+ * retry_count. This is not done by IrLAP spec,
+ * which is strange!
+ */
+ self->retry_count = 0;
+ self->ack_required = TRUE;
+
+ /* poll bit cleared? */
+ if (!info->pf) {
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_P);
+
+ irlap_data_indication(self, skb, FALSE);
+ } else {
+ /* No longer waiting for pf */
+ del_timer(&self->final_timer);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ /* Call higher layer *before* changing state
+ * to give them a chance to send data in the
+ * next LAP frame.
+ * Jean II */
+ irlap_data_indication(self, skb, FALSE);
+
+ /* XMIT states are the most dangerous state
+ * to be in, because user requests are
+ * processed directly and may change state.
+ * On the other hand, in NDM_P, those
+ * requests are queued and we will process
+ * them when we return to irlap_do_event().
+ * Jean II
+ */
+ irlap_next_state(self, LAP_XMIT_P);
+
+ /* This is the last frame.
+ * Make sure it's always called in XMIT state.
+ * - Jean II */
+ irlap_start_poll_timer(self, self->poll_timeout);
+ }
+ break;
+
+ }
+ /* Unexpected next to send (Ns) */
+ if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
+ {
+ if (!info->pf) {
+ irlap_update_nr_received(self, info->nr);
+
+ /*
+ * Wait until the last frame before doing
+ * anything
+ */
+
+ /* Keep state */
+ irlap_next_state(self, LAP_NRM_P);
+ } else {
+ pr_debug("%s(), missing or duplicate frame!\n",
+ __func__);
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, CMD_FRAME);
+
+ self->ack_required = FALSE;
+
+ irlap_start_final_timer(self, self->final_timeout);
+ irlap_next_state(self, LAP_NRM_P);
+ }
+ break;
+ }
+ /*
+ * Unexpected next to receive (Nr)
+ */
+ if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
+ {
+ if (info->pf) {
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ /* Resend rejected frames */
+ irlap_resend_rejected_frames(self, CMD_FRAME);
+
+ self->ack_required = FALSE;
+
+ /* Make sure we account for the time
+ * to transmit our frames. See comemnts
+ * in irlap_send_data_primary_poll().
+ * Jean II */
+ irlap_start_final_timer(self, 2 * self->final_timeout);
+
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_P);
+
+ irlap_data_indication(self, skb, FALSE);
+ } else {
+ /*
+ * Do not resend frames until the last
+ * frame has arrived from the other
+ * device. This is not documented in
+ * IrLAP!!
+ */
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ self->ack_required = FALSE;
+
+ /* Keep state, do not move this line!*/
+ irlap_next_state(self, LAP_NRM_P);
+
+ irlap_data_indication(self, skb, FALSE);
+ }
+ break;
+ }
+ /*
+ * Unexpected next to send (Ns) and next to receive (Nr)
+ * Not documented by IrLAP!
+ */
+ if ((ns_status == NS_UNEXPECTED) &&
+ (nr_status == NR_UNEXPECTED))
+ {
+ pr_debug("%s(), unexpected nr and ns!\n",
+ __func__);
+ if (info->pf) {
+ /* Resend rejected frames */
+ irlap_resend_rejected_frames(self, CMD_FRAME);
+
+ /* Give peer some time to retransmit!
+ * But account for our own Tx. */
+ irlap_start_final_timer(self, 2 * self->final_timeout);
+
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_P);
+ } else {
+ /* Update Nr received */
+ /* irlap_update_nr_received( info->nr); */
+
+ self->ack_required = FALSE;
+ }
+ break;
+ }
+
+ /*
+ * Invalid NR or NS
+ */
+ if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) {
+ if (info->pf) {
+ del_timer(&self->final_timer);
+
+ irlap_next_state(self, LAP_RESET_WAIT);
+
+ irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+ self->xmitflag = TRUE;
+ } else {
+ del_timer(&self->final_timer);
+
+ irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+
+ self->xmitflag = FALSE;
+ }
+ break;
+ }
+ pr_debug("%s(), Not implemented!\n", __func__);
+ pr_debug("%s(), event=%s, ns_status=%d, nr_status=%d\n",
+ __func__, irlap_event[event], ns_status, nr_status);
+ break;
+ case RECV_UI_FRAME:
+ /* Poll bit cleared? */
+ if (!info->pf) {
+ irlap_data_indication(self, skb, TRUE);
+ irlap_next_state(self, LAP_NRM_P);
+ } else {
+ del_timer(&self->final_timer);
+ irlap_data_indication(self, skb, TRUE);
+ irlap_next_state(self, LAP_XMIT_P);
+ pr_debug("%s: RECV_UI_FRAME: next state %s\n",
+ __func__, irlap_state[self->state]);
+ irlap_start_poll_timer(self, self->poll_timeout);
+ }
+ break;
+ case RECV_RR_RSP:
+ /*
+ * If you get a RR, the remote isn't busy anymore,
+ * no matter what the NR
+ */
+ self->remote_busy = FALSE;
+
+ /* Stop final timer */
+ del_timer(&self->final_timer);
+
+ /*
+ * Nr as expected?
+ */
+ ret = irlap_validate_nr_received(self, info->nr);
+ if (ret == NR_EXPECTED) {
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ /*
+ * Got expected NR, so reset the retry_count. This
+ * is not done by the IrLAP standard , which is
+ * strange! DB.
+ */
+ self->retry_count = 0;
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ irlap_next_state(self, LAP_XMIT_P);
+
+ /* Start poll timer */
+ irlap_start_poll_timer(self, self->poll_timeout);
+ } else if (ret == NR_UNEXPECTED) {
+ IRDA_ASSERT(info != NULL, return -1;);
+ /*
+ * Unexpected nr!
+ */
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ pr_debug("RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, vs=%d, vr=%d\n",
+ self->retry_count, info->nr, self->va,
+ self->vs, self->vr);
+
+ /* Resend rejected frames */
+ irlap_resend_rejected_frames(self, CMD_FRAME);
+ irlap_start_final_timer(self, self->final_timeout * 2);
+
+ irlap_next_state(self, LAP_NRM_P);
+ } else if (ret == NR_INVALID) {
+ pr_debug("%s(), Received RR with invalid nr !\n",
+ __func__);
+
+ irlap_next_state(self, LAP_RESET_WAIT);
+
+ irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+ self->xmitflag = TRUE;
+ }
+ break;
+ case RECV_RNR_RSP:
+ IRDA_ASSERT(info != NULL, return -1;);
+
+ /* Stop final timer */
+ del_timer(&self->final_timer);
+ self->remote_busy = TRUE;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+ irlap_next_state(self, LAP_XMIT_P);
+
+ /* Start poll timer */
+ irlap_start_poll_timer(self, self->poll_timeout);
+ break;
+ case RECV_FRMR_RSP:
+ del_timer(&self->final_timer);
+ self->xmitflag = TRUE;
+ irlap_next_state(self, LAP_RESET_WAIT);
+ irlap_reset_indication(self);
+ break;
+ case FINAL_TIMER_EXPIRED:
+ /*
+ * We are allowed to wait for additional 300 ms if
+ * final timer expires when we are in the middle
+ * of receiving a frame (page 45, IrLAP). Check that
+ * we only do this once for each frame.
+ */
+ if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
+ pr_debug("FINAL_TIMER_EXPIRED when receiving a frame! Waiting a little bit more!\n");
+ irlap_start_final_timer(self, msecs_to_jiffies(300));
+
+ /*
+ * Don't allow this to happen one more time in a row,
+ * or else we can get a pretty tight loop here if
+ * if we only receive half a frame. DB.
+ */
+ self->add_wait = TRUE;
+ break;
+ }
+ self->add_wait = FALSE;
+
+ /* N2 is the disconnect timer. Until we reach it, we retry */
+ if (self->retry_count < self->N2) {
+ if (skb_peek(&self->wx_list) == NULL) {
+ /* Retry sending the pf bit to the secondary */
+ pr_debug("nrm_p: resending rr");
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ } else {
+ pr_debug("nrm_p: resend frames");
+ irlap_resend_rejected_frames(self, CMD_FRAME);
+ }
+
+ irlap_start_final_timer(self, self->final_timeout);
+ self->retry_count++;
+ pr_debug("irlap_state_nrm_p: FINAL_TIMER_EXPIRED: retry_count=%d\n",
+ self->retry_count);
+
+ /* Early warning event. I'm using a pretty liberal
+ * interpretation of the spec and generate an event
+ * every time the timer is multiple of N1 (and not
+ * only the first time). This allow application
+ * to know precisely if connectivity restart...
+ * Jean II */
+ if((self->retry_count % self->N1) == 0)
+ irlap_status_indication(self,
+ STATUS_NO_ACTIVITY);
+
+ /* Keep state */
+ } else {
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+ irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+ }
+ break;
+ case RECV_REJ_RSP:
+ irlap_update_nr_received(self, info->nr);
+ if (self->remote_busy) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ } else
+ irlap_resend_rejected_frames(self, CMD_FRAME);
+ irlap_start_final_timer(self, 2 * self->final_timeout);
+ break;
+ case RECV_SREJ_RSP:
+ irlap_update_nr_received(self, info->nr);
+ if (self->remote_busy) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ } else
+ irlap_resend_rejected_frame(self, CMD_FRAME);
+ irlap_start_final_timer(self, 2 * self->final_timeout);
+ break;
+ case RECV_RD_RSP:
+ pr_debug("%s(), RECV_RD_RSP\n", __func__);
+
+ irlap_flush_all_queues(self);
+ irlap_next_state(self, LAP_XMIT_P);
+ /* Call back the LAP state machine to do a proper disconnect */
+ irlap_disconnect_request(self);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_reset_wait (event, skb, info)
+ *
+ * We have informed the service user of a reset condition, and is
+ * awaiting reset of disconnect request.
+ *
+ */
+static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s(), event = %s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case RESET_REQUEST:
+ if (self->xmitflag) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_snrm_frame(self, NULL);
+ irlap_start_final_timer(self, self->final_timeout);
+ irlap_next_state(self, LAP_RESET);
+ } else {
+ irlap_start_final_timer(self, self->final_timeout);
+ irlap_next_state(self, LAP_RESET);
+ }
+ break;
+ case DISCONNECT_REQUEST:
+ irlap_wait_min_turn_around( self, &self->qos_tx);
+ irlap_send_disc_frame( self);
+ irlap_flush_all_queues( self);
+ irlap_start_final_timer( self, self->final_timeout);
+ self->retry_count = 0;
+ irlap_next_state( self, LAP_PCLOSE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n", __func__,
+ irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_reset (self, event, skb, info)
+ *
+ * We have sent a SNRM reset command to the peer layer, and is awaiting
+ * reply.
+ *
+ */
+static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s(), event = %s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case RECV_DISC_CMD:
+ del_timer(&self->final_timer);
+
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+
+ break;
+ case RECV_UA_RSP:
+ del_timer(&self->final_timer);
+
+ /* Initiate connection state */
+ irlap_initiate_connection_state(self);
+
+ irlap_reset_confirm();
+
+ self->remote_busy = FALSE;
+
+ irlap_next_state(self, LAP_XMIT_P);
+
+ irlap_start_poll_timer(self, self->poll_timeout);
+
+ break;
+ case FINAL_TIMER_EXPIRED:
+ if (self->retry_count < 3) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ IRDA_ASSERT(self->netdev != NULL, return -1;);
+ irlap_send_snrm_frame(self, self->qos_dev);
+
+ self->retry_count++; /* Experimental!! */
+
+ irlap_start_final_timer(self, self->final_timeout);
+ irlap_next_state(self, LAP_RESET);
+ } else if (self->retry_count >= self->N3) {
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+ }
+ break;
+ case RECV_SNRM_CMD:
+ /*
+ * SNRM frame is not allowed to contain an I-field in this
+ * state
+ */
+ if (!info) {
+ pr_debug("%s(), RECV_SNRM_CMD\n", __func__);
+ irlap_initiate_connection_state(self);
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_ua_response_frame(self, &self->qos_rx);
+ irlap_reset_confirm();
+ irlap_start_wd_timer(self, self->wd_timeout);
+ irlap_next_state(self, LAP_NDM);
+ } else {
+ pr_debug("%s(), SNRM frame contained an I field!\n",
+ __func__);
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlap_event[event]);
+
+ ret = -1;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_xmit_s (event, skb, info)
+ *
+ * XMIT_S, The secondary station has been given the right to transmit,
+ * and we therefore do not expect to receive any transmissions from other
+ * stations.
+ */
+static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s(), event=%s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -ENODEV;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+ switch (event) {
+ case SEND_I_CMD:
+ /*
+ * Send frame only if send window > 0
+ */
+ if ((self->window > 0) && (!self->remote_busy)) {
+ int nextfit;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ struct sk_buff *skb_next;
+
+ /*
+ * Same deal as in irlap_state_xmit_p(), so see
+ * the comments at that point.
+ * We are the secondary, so there are only subtle
+ * differences. - Jean II
+ */
+
+ /* Check if a subsequent skb exist and would fit in
+ * the current window (with respect to turnaround
+ * time). - Jean II */
+ skb_next = skb_peek(&self->txq);
+ nextfit = ((skb_next != NULL) &&
+ ((skb_next->len + skb->len) <=
+ self->bytes_left));
+
+ /*
+ * Test if we have transmitted more bytes over the
+ * link than its possible to do with the current
+ * speed and turn-around-time.
+ */
+ if((!nextfit) && (skb->len > self->bytes_left)) {
+ pr_debug("%s(), Not allowed to transmit more bytes!\n",
+ __func__);
+ /* Requeue the skb */
+ skb_queue_head(&self->txq, skb_get(skb));
+
+ /*
+ * Switch to NRM_S, this is only possible
+ * when we are in secondary mode, since we
+ * must be sure that we don't miss any RR
+ * frames
+ */
+ self->window = self->window_size;
+ self->bytes_left = self->line_capacity;
+ irlap_start_wd_timer(self, self->wd_timeout);
+
+ irlap_next_state(self, LAP_NRM_S);
+ /* Slight difference with primary :
+ * here we would wait for the other side to
+ * expire the turnaround. - Jean II */
+
+ return -EPROTO; /* Try again later */
+ }
+ /* Subtract space used by this skb */
+ self->bytes_left -= skb->len;
+#else /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ /* Window has been adjusted for the max packet
+ * size, so much simpler... - Jean II */
+ nextfit = !skb_queue_empty(&self->txq);
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ /*
+ * Send data with final bit cleared only if window > 1
+ * and there is more frames to be sent
+ */
+ if ((self->window > 1) && (nextfit)) {
+ irlap_send_data_secondary(self, skb);
+ irlap_next_state(self, LAP_XMIT_S);
+ } else {
+ irlap_send_data_secondary_final(self, skb);
+ irlap_next_state(self, LAP_NRM_S);
+
+ /*
+ * Make sure state machine does not try to send
+ * any more frames
+ */
+ ret = -EPROTO;
+ }
+ } else {
+ pr_debug("%s(), Unable to send!\n", __func__);
+ skb_queue_head(&self->txq, skb_get(skb));
+ ret = -EPROTO;
+ }
+ break;
+ case DISCONNECT_REQUEST:
+ irlap_send_rd_frame(self);
+ irlap_flush_all_queues(self);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ irlap_next_state(self, LAP_SCLOSE);
+ break;
+ case DATA_REQUEST:
+ /* Nothing to do, irlap_do_event() will send the packet
+ * when we return... - Jean II */
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n", __func__,
+ irlap_event[event]);
+
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_nrm_s (event, skb, info)
+ *
+ * NRM_S (Normal Response Mode as Secondary) state, in this state we are
+ * expecting to receive frames from the primary station
+ *
+ */
+static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ int ns_status;
+ int nr_status;
+ int ret = 0;
+
+ pr_debug("%s(), event=%s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ switch (event) {
+ case RECV_I_CMD: /* Optimize for the common case */
+ /* FIXME: must check for remote_busy below */
+ pr_debug("%s(), event=%s nr=%d, vs=%d, ns=%d, vr=%d, pf=%d\n",
+ __func__, irlap_event[event], info->nr,
+ self->vs, info->ns, self->vr, info->pf);
+
+ self->retry_count = 0;
+
+ ns_status = irlap_validate_ns_received(self, info->ns);
+ nr_status = irlap_validate_nr_received(self, info->nr);
+ /*
+ * Check for expected I(nformation) frame
+ */
+ if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
+
+ /* Update Vr (next frame for us to receive) */
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ /*
+ * poll bit cleared?
+ */
+ if (!info->pf) {
+
+ self->ack_required = TRUE;
+
+ /*
+ * Starting WD-timer here is optional, but
+ * not recommended. Note 6 IrLAP p. 83
+ */
+#if 0
+ irda_start_timer(WD_TIMER, self->wd_timeout);
+#endif
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_S);
+
+ irlap_data_indication(self, skb, FALSE);
+ break;
+ } else {
+ /*
+ * We should wait before sending RR, and
+ * also before changing to XMIT_S
+ * state. (note 1, IrLAP p. 82)
+ */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ /*
+ * Give higher layers a chance to
+ * immediately reply with some data before
+ * we decide if we should send a RR frame
+ * or not
+ */
+ irlap_data_indication(self, skb, FALSE);
+
+ /* Any pending data requests? */
+ if (!skb_queue_empty(&self->txq) &&
+ (self->window > 0))
+ {
+ self->ack_required = TRUE;
+
+ del_timer(&self->wd_timer);
+
+ irlap_next_state(self, LAP_XMIT_S);
+ } else {
+ irlap_send_rr_frame(self, RSP_FRAME);
+ irlap_start_wd_timer(self,
+ self->wd_timeout);
+
+ /* Keep the state */
+ irlap_next_state(self, LAP_NRM_S);
+ }
+ break;
+ }
+ }
+ /*
+ * Check for Unexpected next to send (Ns)
+ */
+ if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
+ {
+ /* Unexpected next to send, with final bit cleared */
+ if (!info->pf) {
+ irlap_update_nr_received(self, info->nr);
+
+ irlap_start_wd_timer(self, self->wd_timeout);
+ } else {
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, RSP_FRAME);
+
+ irlap_start_wd_timer(self, self->wd_timeout);
+ }
+ break;
+ }
+
+ /*
+ * Unexpected Next to Receive(NR) ?
+ */
+ if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
+ {
+ if (info->pf) {
+ pr_debug("RECV_I_RSP: frame(s) lost\n");
+
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ /* Resend rejected frames */
+ irlap_resend_rejected_frames(self, RSP_FRAME);
+
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_S);
+
+ irlap_data_indication(self, skb, FALSE);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ break;
+ }
+ /*
+ * This is not documented in IrLAP!! Unexpected NR
+ * with poll bit cleared
+ */
+ if (!info->pf) {
+ self->vr = (self->vr + 1) % 8;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+
+ /* Keep state, do not move this line */
+ irlap_next_state(self, LAP_NRM_S);
+
+ irlap_data_indication(self, skb, FALSE);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ }
+ break;
+ }
+
+ if (ret == NR_INVALID) {
+ pr_debug("NRM_S, NR_INVALID not implemented!\n");
+ }
+ if (ret == NS_INVALID) {
+ pr_debug("NRM_S, NS_INVALID not implemented!\n");
+ }
+ break;
+ case RECV_UI_FRAME:
+ /*
+ * poll bit cleared?
+ */
+ if (!info->pf) {
+ irlap_data_indication(self, skb, TRUE);
+ irlap_next_state(self, LAP_NRM_S); /* Keep state */
+ } else {
+ /*
+ * Any pending data requests?
+ */
+ if (!skb_queue_empty(&self->txq) &&
+ (self->window > 0) && !self->remote_busy)
+ {
+ irlap_data_indication(self, skb, TRUE);
+
+ del_timer(&self->wd_timer);
+
+ irlap_next_state(self, LAP_XMIT_S);
+ } else {
+ irlap_data_indication(self, skb, TRUE);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ irlap_send_rr_frame(self, RSP_FRAME);
+ self->ack_required = FALSE;
+
+ irlap_start_wd_timer(self, self->wd_timeout);
+
+ /* Keep the state */
+ irlap_next_state(self, LAP_NRM_S);
+ }
+ }
+ break;
+ case RECV_RR_CMD:
+ self->retry_count = 0;
+
+ /*
+ * Nr as expected?
+ */
+ nr_status = irlap_validate_nr_received(self, info->nr);
+ if (nr_status == NR_EXPECTED) {
+ if (!skb_queue_empty(&self->txq) &&
+ (self->window > 0)) {
+ self->remote_busy = FALSE;
+
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+ del_timer(&self->wd_timer);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_next_state(self, LAP_XMIT_S);
+ } else {
+ self->remote_busy = FALSE;
+ /* Update Nr received */
+ irlap_update_nr_received(self, info->nr);
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_start_wd_timer(self, self->wd_timeout);
+
+ /* Note : if the link is idle (this case),
+ * we never go in XMIT_S, so we never get a
+ * chance to process any DISCONNECT_REQUEST.
+ * Do it now ! - Jean II */
+ if (self->disconnect_pending) {
+ /* Disconnect */
+ irlap_send_rd_frame(self);
+ irlap_flush_all_queues(self);
+
+ irlap_next_state(self, LAP_SCLOSE);
+ } else {
+ /* Just send back pf bit */
+ irlap_send_rr_frame(self, RSP_FRAME);
+
+ irlap_next_state(self, LAP_NRM_S);
+ }
+ }
+ } else if (nr_status == NR_UNEXPECTED) {
+ self->remote_busy = FALSE;
+ irlap_update_nr_received(self, info->nr);
+ irlap_resend_rejected_frames(self, RSP_FRAME);
+
+ irlap_start_wd_timer(self, self->wd_timeout);
+
+ /* Keep state */
+ irlap_next_state(self, LAP_NRM_S);
+ } else {
+ pr_debug("%s(), invalid nr not implemented!\n",
+ __func__);
+ }
+ break;
+ case RECV_SNRM_CMD:
+ /* SNRM frame is not allowed to contain an I-field */
+ if (!info) {
+ del_timer(&self->wd_timer);
+ pr_debug("%s(), received SNRM cmd\n", __func__);
+ irlap_next_state(self, LAP_RESET_CHECK);
+
+ irlap_reset_indication(self);
+ } else {
+ pr_debug("%s(), SNRM frame contained an I-field!\n",
+ __func__);
+
+ }
+ break;
+ case RECV_REJ_CMD:
+ irlap_update_nr_received(self, info->nr);
+ if (self->remote_busy) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, RSP_FRAME);
+ } else
+ irlap_resend_rejected_frames(self, RSP_FRAME);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ break;
+ case RECV_SREJ_CMD:
+ irlap_update_nr_received(self, info->nr);
+ if (self->remote_busy) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, RSP_FRAME);
+ } else
+ irlap_resend_rejected_frame(self, RSP_FRAME);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ break;
+ case WD_TIMER_EXPIRED:
+ /*
+ * Wait until retry_count * n matches negotiated threshold/
+ * disconnect time (note 2 in IrLAP p. 82)
+ *
+ * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED
+ * Note : self->wd_timeout = (self->final_timeout * 2),
+ * which explain why we use (self->N2 / 2) here !!!
+ * Jean II
+ */
+ pr_debug("%s(), retry_count = %d\n", __func__,
+ self->retry_count);
+
+ if (self->retry_count < (self->N2 / 2)) {
+ /* No retry, just wait for primary */
+ irlap_start_wd_timer(self, self->wd_timeout);
+ self->retry_count++;
+
+ if((self->retry_count % (self->N1 / 2)) == 0)
+ irlap_status_indication(self,
+ STATUS_NO_ACTIVITY);
+ } else {
+ irlap_apply_default_connection_parameters(self);
+
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+ irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+ }
+ break;
+ case RECV_DISC_CMD:
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ /* Send disconnect response */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_ua_response_frame(self, NULL);
+
+ del_timer(&self->wd_timer);
+ irlap_flush_all_queues(self);
+ /* Set default link parameters */
+ irlap_apply_default_connection_parameters(self);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ case RECV_DISCOVERY_XID_CMD:
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rr_frame(self, RSP_FRAME);
+ self->ack_required = TRUE;
+ irlap_start_wd_timer(self, self->wd_timeout);
+ irlap_next_state(self, LAP_NRM_S);
+
+ break;
+ case RECV_TEST_CMD:
+ /* Remove test frame header (only LAP header in NRM) */
+ skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
+
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_start_wd_timer(self, self->wd_timeout);
+
+ /* Send response (info will be copied) */
+ irlap_send_test_frame(self, self->caddr, info->daddr, skb);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d, (%s)\n", __func__,
+ event, irlap_event[event]);
+
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlap_state_sclose (self, event, skb, info)
+ */
+static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb, struct irlap_info *info)
+{
+ IRDA_ASSERT(self != NULL, return -ENODEV;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+ switch (event) {
+ case RECV_DISC_CMD:
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ /* Send disconnect response */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_ua_response_frame(self, NULL);
+
+ del_timer(&self->wd_timer);
+ /* Set default link parameters */
+ irlap_apply_default_connection_parameters(self);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ case RECV_DM_RSP:
+ /* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames
+ * shall take us down into default NDM state, like DM_RSP
+ */
+ case RECV_RR_RSP:
+ case RECV_RNR_RSP:
+ case RECV_REJ_RSP:
+ case RECV_SREJ_RSP:
+ case RECV_I_RSP:
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ del_timer(&self->wd_timer);
+ irlap_apply_default_connection_parameters(self);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ case WD_TIMER_EXPIRED:
+ /* Always switch state before calling upper layers */
+ irlap_next_state(self, LAP_NDM);
+
+ irlap_apply_default_connection_parameters(self);
+
+ irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+ break;
+ default:
+ /* IrLAP-1.1 p.82: in SCLOSE, basically any received frame
+ * with pf=1 shall restart the wd-timer and resend the rd:rsp
+ */
+ if (info != NULL && info->pf) {
+ del_timer(&self->wd_timer);
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rd_frame(self);
+ irlap_start_wd_timer(self, self->wd_timeout);
+ break; /* stay in SCLOSE */
+ }
+
+ pr_debug("%s(), Unknown event %d, (%s)\n", __func__,
+ event, irlap_event[event]);
+
+ break;
+ }
+
+ return -1;
+}
+
+static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event,
+ struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ int ret = 0;
+
+ pr_debug("%s(), event=%s\n", __func__, irlap_event[event]);
+
+ IRDA_ASSERT(self != NULL, return -ENODEV;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+ switch (event) {
+ case RESET_RESPONSE:
+ irlap_send_ua_response_frame(self, &self->qos_rx);
+ irlap_initiate_connection_state(self);
+ irlap_start_wd_timer(self, WD_TIMEOUT);
+ irlap_flush_all_queues(self);
+
+ irlap_next_state(self, LAP_NRM_S);
+ break;
+ case DISCONNECT_REQUEST:
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_send_rd_frame(self);
+ irlap_start_wd_timer(self, WD_TIMEOUT);
+ irlap_next_state(self, LAP_SCLOSE);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %d, (%s)\n", __func__,
+ event, irlap_event[event]);
+
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
new file mode 100644
index 000000000..b936b1251
--- /dev/null
+++ b/net/irda/irlap_frame.c
@@ -0,0 +1,1411 @@
+/*********************************************************************
+ *
+ * Filename: irlap_frame.c
+ * Version: 1.0
+ * Description: Build and transmit IrLAP frames
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Aug 19 10:27:26 1997
+ * Modified at: Wed Jan 5 08:59:04 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/irda.h>
+#include <linux/slab.h>
+
+#include <net/pkt_sched.h>
+#include <net/sock.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/qos.h>
+
+static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb,
+ int command);
+
+/*
+ * Function irlap_insert_info (self, skb)
+ *
+ * Insert minimum turnaround time and speed information into the skb. We
+ * need to do this since it's per packet relevant information. Safe to
+ * have this function inlined since it's only called from one place
+ */
+static inline void irlap_insert_info(struct irlap_cb *self,
+ struct sk_buff *skb)
+{
+ struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+
+ /*
+ * Insert MTT (min. turn time) and speed into skb, so that the
+ * device driver knows which settings to use
+ */
+ cb->magic = LAP_MAGIC;
+ cb->mtt = self->mtt_required;
+ cb->next_speed = self->speed;
+
+ /* Reset */
+ self->mtt_required = 0;
+
+ /*
+ * Delay equals negotiated BOFs count, plus the number of BOFs to
+ * force the negotiated minimum turnaround time
+ */
+ cb->xbofs = self->bofs_count;
+ cb->next_xbofs = self->next_bofs;
+ cb->xbofs_delay = self->xbofs_delay;
+
+ /* Reset XBOF's delay (used only for getting min turn time) */
+ self->xbofs_delay = 0;
+ /* Put the correct xbofs value for the next packet */
+ self->bofs_count = self->next_bofs;
+}
+
+/*
+ * Function irlap_queue_xmit (self, skb)
+ *
+ * A little wrapper for dev_queue_xmit, so we can insert some common
+ * code into it.
+ */
+void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb)
+{
+ /* Some common init stuff */
+ skb->dev = self->netdev;
+ skb_reset_mac_header(skb);
+ skb_reset_network_header(skb);
+ skb_reset_transport_header(skb);
+ skb->protocol = htons(ETH_P_IRDA);
+ skb->priority = TC_PRIO_BESTEFFORT;
+
+ irlap_insert_info(self, skb);
+
+ if (unlikely(self->mode & IRDA_MODE_MONITOR)) {
+ pr_debug("%s(): %s is in monitor mode\n", __func__,
+ self->netdev->name);
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ dev_queue_xmit(skb);
+}
+
+/*
+ * Function irlap_send_snrm_cmd (void)
+ *
+ * Transmits a connect SNRM command frame
+ */
+void irlap_send_snrm_frame(struct irlap_cb *self, struct qos_info *qos)
+{
+ struct sk_buff *tx_skb;
+ struct snrm_frame *frame;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Allocate frame */
+ tx_skb = alloc_skb(sizeof(struct snrm_frame) +
+ IRLAP_NEGOCIATION_PARAMS_LEN,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct snrm_frame *) skb_put(tx_skb, 2);
+
+ /* Insert connection address field */
+ if (qos)
+ frame->caddr = CMD_FRAME | CBROADCAST;
+ else
+ frame->caddr = CMD_FRAME | self->caddr;
+
+ /* Insert control field */
+ frame->control = SNRM_CMD | PF_BIT;
+
+ /*
+ * If we are establishing a connection then insert QoS parameters
+ */
+ if (qos) {
+ skb_put(tx_skb, 9); /* 25 left */
+ frame->saddr = cpu_to_le32(self->saddr);
+ frame->daddr = cpu_to_le32(self->daddr);
+
+ frame->ncaddr = self->caddr;
+
+ ret = irlap_insert_qos_negotiation_params(self, tx_skb);
+ if (ret < 0) {
+ dev_kfree_skb(tx_skb);
+ return;
+ }
+ }
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_snrm_cmd (skb, info)
+ *
+ * Received SNRM (Set Normal Response Mode) command frame
+ *
+ */
+static void irlap_recv_snrm_cmd(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ struct snrm_frame *frame;
+
+ if (pskb_may_pull(skb,sizeof(struct snrm_frame))) {
+ frame = (struct snrm_frame *) skb->data;
+
+ /* Copy the new connection address ignoring the C/R bit */
+ info->caddr = frame->ncaddr & 0xFE;
+
+ /* Check if the new connection address is valid */
+ if ((info->caddr == 0x00) || (info->caddr == 0xfe)) {
+ pr_debug("%s(), invalid connection address!\n",
+ __func__);
+ return;
+ }
+
+ /* Copy peer device address */
+ info->daddr = le32_to_cpu(frame->saddr);
+ info->saddr = le32_to_cpu(frame->daddr);
+
+ /* Only accept if addressed directly to us */
+ if (info->saddr != self->saddr) {
+ pr_debug("%s(), not addressed to us!\n",
+ __func__);
+ return;
+ }
+ irlap_do_event(self, RECV_SNRM_CMD, skb, info);
+ } else {
+ /* Signal that this SNRM frame does not contain and I-field */
+ irlap_do_event(self, RECV_SNRM_CMD, skb, NULL);
+ }
+}
+
+/*
+ * Function irlap_send_ua_response_frame (qos)
+ *
+ * Send UA (Unnumbered Acknowledgement) frame
+ *
+ */
+void irlap_send_ua_response_frame(struct irlap_cb *self, struct qos_info *qos)
+{
+ struct sk_buff *tx_skb;
+ struct ua_frame *frame;
+ int ret;
+
+ pr_debug("%s() <%ld>\n", __func__, jiffies);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Allocate frame */
+ tx_skb = alloc_skb(sizeof(struct ua_frame) +
+ IRLAP_NEGOCIATION_PARAMS_LEN,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct ua_frame *) skb_put(tx_skb, 10);
+
+ /* Build UA response */
+ frame->caddr = self->caddr;
+ frame->control = UA_RSP | PF_BIT;
+
+ frame->saddr = cpu_to_le32(self->saddr);
+ frame->daddr = cpu_to_le32(self->daddr);
+
+ /* Should we send QoS negotiation parameters? */
+ if (qos) {
+ ret = irlap_insert_qos_negotiation_params(self, tx_skb);
+ if (ret < 0) {
+ dev_kfree_skb(tx_skb);
+ return;
+ }
+ }
+
+ irlap_queue_xmit(self, tx_skb);
+}
+
+
+/*
+ * Function irlap_send_dm_frame (void)
+ *
+ * Send disconnected mode (DM) frame
+ *
+ */
+void irlap_send_dm_frame( struct irlap_cb *self)
+{
+ struct sk_buff *tx_skb = NULL;
+ struct dm_frame *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ tx_skb = alloc_skb(sizeof(struct dm_frame), GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct dm_frame *)skb_put(tx_skb, 2);
+
+ if (self->state == LAP_NDM)
+ frame->caddr = CBROADCAST;
+ else
+ frame->caddr = self->caddr;
+
+ frame->control = DM_RSP | PF_BIT;
+
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_disc_frame (void)
+ *
+ * Send disconnect (DISC) frame
+ *
+ */
+void irlap_send_disc_frame(struct irlap_cb *self)
+{
+ struct sk_buff *tx_skb = NULL;
+ struct disc_frame *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ tx_skb = alloc_skb(sizeof(struct disc_frame), GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct disc_frame *)skb_put(tx_skb, 2);
+
+ frame->caddr = self->caddr | CMD_FRAME;
+ frame->control = DISC_CMD | PF_BIT;
+
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_discovery_xid_frame (S, s, command)
+ *
+ * Build and transmit a XID (eXchange station IDentifier) discovery
+ * frame.
+ */
+void irlap_send_discovery_xid_frame(struct irlap_cb *self, int S, __u8 s,
+ __u8 command, discovery_t *discovery)
+{
+ struct sk_buff *tx_skb = NULL;
+ struct xid_frame *frame;
+ __u32 bcast = BROADCAST;
+ __u8 *info;
+
+ pr_debug("%s(), s=%d, S=%d, command=%d\n", __func__,
+ s, S, command);
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(discovery != NULL, return;);
+
+ tx_skb = alloc_skb(sizeof(struct xid_frame) + IRLAP_DISCOVERY_INFO_LEN,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ skb_put(tx_skb, 14);
+ frame = (struct xid_frame *) tx_skb->data;
+
+ if (command) {
+ frame->caddr = CBROADCAST | CMD_FRAME;
+ frame->control = XID_CMD | PF_BIT;
+ } else {
+ frame->caddr = CBROADCAST;
+ frame->control = XID_RSP | PF_BIT;
+ }
+ frame->ident = XID_FORMAT;
+
+ frame->saddr = cpu_to_le32(self->saddr);
+
+ if (command)
+ frame->daddr = cpu_to_le32(bcast);
+ else
+ frame->daddr = cpu_to_le32(discovery->data.daddr);
+
+ switch (S) {
+ case 1:
+ frame->flags = 0x00;
+ break;
+ case 6:
+ frame->flags = 0x01;
+ break;
+ case 8:
+ frame->flags = 0x02;
+ break;
+ case 16:
+ frame->flags = 0x03;
+ break;
+ default:
+ frame->flags = 0x02;
+ break;
+ }
+
+ frame->slotnr = s;
+ frame->version = 0x00;
+
+ /*
+ * Provide info for final slot only in commands, and for all
+ * responses. Send the second byte of the hint only if the
+ * EXTENSION bit is set in the first byte.
+ */
+ if (!command || (frame->slotnr == 0xff)) {
+ int len;
+
+ if (discovery->data.hints[0] & HINT_EXTENSION) {
+ info = skb_put(tx_skb, 2);
+ info[0] = discovery->data.hints[0];
+ info[1] = discovery->data.hints[1];
+ } else {
+ info = skb_put(tx_skb, 1);
+ info[0] = discovery->data.hints[0];
+ }
+ info = skb_put(tx_skb, 1);
+ info[0] = discovery->data.charset;
+
+ len = IRDA_MIN(discovery->name_len, skb_tailroom(tx_skb));
+ info = skb_put(tx_skb, len);
+ memcpy(info, discovery->data.info, len);
+ }
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_discovery_xid_rsp (skb, info)
+ *
+ * Received a XID discovery response
+ *
+ */
+static void irlap_recv_discovery_xid_rsp(struct irlap_cb *self,
+ struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ struct xid_frame *xid;
+ discovery_t *discovery = NULL;
+ __u8 *discovery_info;
+ char *text;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ if (!pskb_may_pull(skb, sizeof(struct xid_frame))) {
+ net_err_ratelimited("%s: frame too short!\n", __func__);
+ return;
+ }
+
+ xid = (struct xid_frame *) skb->data;
+
+ info->daddr = le32_to_cpu(xid->saddr);
+ info->saddr = le32_to_cpu(xid->daddr);
+
+ /* Make sure frame is addressed to us */
+ if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) {
+ pr_debug("%s(), frame is not addressed to us!\n",
+ __func__);
+ return;
+ }
+
+ if ((discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC)) == NULL) {
+ net_warn_ratelimited("%s: kmalloc failed!\n", __func__);
+ return;
+ }
+
+ discovery->data.daddr = info->daddr;
+ discovery->data.saddr = self->saddr;
+ discovery->timestamp = jiffies;
+
+ pr_debug("%s(), daddr=%08x\n", __func__,
+ discovery->data.daddr);
+
+ discovery_info = skb_pull(skb, sizeof(struct xid_frame));
+
+ /* Get info returned from peer */
+ discovery->data.hints[0] = discovery_info[0];
+ if (discovery_info[0] & HINT_EXTENSION) {
+ pr_debug("EXTENSION\n");
+ discovery->data.hints[1] = discovery_info[1];
+ discovery->data.charset = discovery_info[2];
+ text = (char *) &discovery_info[3];
+ } else {
+ discovery->data.hints[1] = 0;
+ discovery->data.charset = discovery_info[1];
+ text = (char *) &discovery_info[2];
+ }
+ /*
+ * Terminate info string, should be safe since this is where the
+ * FCS bytes resides.
+ */
+ skb->data[skb->len] = '\0';
+ strncpy(discovery->data.info, text, NICKNAME_MAX_LEN);
+ discovery->name_len = strlen(discovery->data.info);
+
+ info->discovery = discovery;
+
+ irlap_do_event(self, RECV_DISCOVERY_XID_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_discovery_xid_cmd (skb, info)
+ *
+ * Received a XID discovery command
+ *
+ */
+static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self,
+ struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ struct xid_frame *xid;
+ discovery_t *discovery = NULL;
+ __u8 *discovery_info;
+ char *text;
+
+ if (!pskb_may_pull(skb, sizeof(struct xid_frame))) {
+ net_err_ratelimited("%s: frame too short!\n", __func__);
+ return;
+ }
+
+ xid = (struct xid_frame *) skb->data;
+
+ info->daddr = le32_to_cpu(xid->saddr);
+ info->saddr = le32_to_cpu(xid->daddr);
+
+ /* Make sure frame is addressed to us */
+ if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) {
+ pr_debug("%s(), frame is not addressed to us!\n",
+ __func__);
+ return;
+ }
+
+ switch (xid->flags & 0x03) {
+ case 0x00:
+ info->S = 1;
+ break;
+ case 0x01:
+ info->S = 6;
+ break;
+ case 0x02:
+ info->S = 8;
+ break;
+ case 0x03:
+ info->S = 16;
+ break;
+ default:
+ /* Error!! */
+ return;
+ }
+ info->s = xid->slotnr;
+
+ discovery_info = skb_pull(skb, sizeof(struct xid_frame));
+
+ /*
+ * Check if last frame
+ */
+ if (info->s == 0xff) {
+ /* Check if things are sane at this point... */
+ if((discovery_info == NULL) ||
+ !pskb_may_pull(skb, 3)) {
+ net_err_ratelimited("%s: discovery frame too short!\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * We now have some discovery info to deliver!
+ */
+ discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC);
+ if (!discovery)
+ return;
+
+ discovery->data.daddr = info->daddr;
+ discovery->data.saddr = self->saddr;
+ discovery->timestamp = jiffies;
+
+ discovery->data.hints[0] = discovery_info[0];
+ if (discovery_info[0] & HINT_EXTENSION) {
+ discovery->data.hints[1] = discovery_info[1];
+ discovery->data.charset = discovery_info[2];
+ text = (char *) &discovery_info[3];
+ } else {
+ discovery->data.hints[1] = 0;
+ discovery->data.charset = discovery_info[1];
+ text = (char *) &discovery_info[2];
+ }
+ /*
+ * Terminate string, should be safe since this is where the
+ * FCS bytes resides.
+ */
+ skb->data[skb->len] = '\0';
+ strncpy(discovery->data.info, text, NICKNAME_MAX_LEN);
+ discovery->name_len = strlen(discovery->data.info);
+
+ info->discovery = discovery;
+ } else
+ info->discovery = NULL;
+
+ irlap_do_event(self, RECV_DISCOVERY_XID_CMD, skb, info);
+}
+
+/*
+ * Function irlap_send_rr_frame (self, command)
+ *
+ * Build and transmit RR (Receive Ready) frame. Notice that it is currently
+ * only possible to send RR frames with the poll bit set.
+ */
+void irlap_send_rr_frame(struct irlap_cb *self, int command)
+{
+ struct sk_buff *tx_skb;
+ struct rr_frame *frame;
+
+ tx_skb = alloc_skb(sizeof(struct rr_frame), GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct rr_frame *)skb_put(tx_skb, 2);
+
+ frame->caddr = self->caddr;
+ frame->caddr |= (command) ? CMD_FRAME : 0;
+
+ frame->control = RR | PF_BIT | (self->vr << 5);
+
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_rd_frame (self)
+ *
+ * Request disconnect. Used by a secondary station to request the
+ * disconnection of the link.
+ */
+void irlap_send_rd_frame(struct irlap_cb *self)
+{
+ struct sk_buff *tx_skb;
+ struct rd_frame *frame;
+
+ tx_skb = alloc_skb(sizeof(struct rd_frame), GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ frame = (struct rd_frame *)skb_put(tx_skb, 2);
+
+ frame->caddr = self->caddr;
+ frame->control = RD_RSP | PF_BIT;
+
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_rr_frame (skb, info)
+ *
+ * Received RR (Receive Ready) frame from peer station, no harm in
+ * making it inline since its called only from one single place
+ * (irlap_driver_rcv).
+ */
+static inline void irlap_recv_rr_frame(struct irlap_cb *self,
+ struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ info->nr = skb->data[1] >> 5;
+
+ /* Check if this is a command or a response frame */
+ if (command)
+ irlap_do_event(self, RECV_RR_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_RR_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_rnr_frame (self, skb, info)
+ *
+ * Received RNR (Receive Not Ready) frame from peer station
+ *
+ */
+static void irlap_recv_rnr_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ info->nr = skb->data[1] >> 5;
+
+ pr_debug("%s(), nr=%d, %ld\n", __func__, info->nr, jiffies);
+
+ if (command)
+ irlap_do_event(self, RECV_RNR_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_RNR_RSP, skb, info);
+}
+
+static void irlap_recv_rej_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ info->nr = skb->data[1] >> 5;
+
+ /* Check if this is a command or a response frame */
+ if (command)
+ irlap_do_event(self, RECV_REJ_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_REJ_RSP, skb, info);
+}
+
+static void irlap_recv_srej_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ info->nr = skb->data[1] >> 5;
+
+ /* Check if this is a command or a response frame */
+ if (command)
+ irlap_do_event(self, RECV_SREJ_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_SREJ_RSP, skb, info);
+}
+
+static void irlap_recv_disc_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ /* Check if this is a command or a response frame */
+ if (command)
+ irlap_do_event(self, RECV_DISC_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_RD_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_ua_frame (skb, frame)
+ *
+ * Received UA (Unnumbered Acknowledgement) frame
+ *
+ */
+static inline void irlap_recv_ua_frame(struct irlap_cb *self,
+ struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ irlap_do_event(self, RECV_UA_RSP, skb, info);
+}
+
+/*
+ * Function irlap_send_data_primary(self, skb)
+ *
+ * Send I-frames as the primary station but without the poll bit set
+ *
+ */
+void irlap_send_data_primary(struct irlap_cb *self, struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+
+ if (skb->data[1] == I_FRAME) {
+
+ /*
+ * Insert frame sequence number (Vs) in control field before
+ * inserting into transmit window queue.
+ */
+ skb->data[1] = I_FRAME | (self->vs << 1);
+
+ /*
+ * Insert frame in store, in case of retransmissions
+ * Increase skb reference count, see irlap_do_event()
+ */
+ skb_get(skb);
+ skb_queue_tail(&self->wx_list, skb);
+
+ /* Copy buffer */
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+ if (tx_skb == NULL) {
+ return;
+ }
+
+ self->vs = (self->vs + 1) % 8;
+ self->ack_required = FALSE;
+ self->window -= 1;
+
+ irlap_send_i_frame( self, tx_skb, CMD_FRAME);
+ } else {
+ pr_debug("%s(), sending unreliable frame\n", __func__);
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+ self->window -= 1;
+ }
+}
+/*
+ * Function irlap_send_data_primary_poll (self, skb)
+ *
+ * Send I(nformation) frame as primary with poll bit set
+ */
+void irlap_send_data_primary_poll(struct irlap_cb *self, struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+ int transmission_time;
+
+ /* Stop P timer */
+ del_timer(&self->poll_timer);
+
+ /* Is this reliable or unreliable data? */
+ if (skb->data[1] == I_FRAME) {
+
+ /*
+ * Insert frame sequence number (Vs) in control field before
+ * inserting into transmit window queue.
+ */
+ skb->data[1] = I_FRAME | (self->vs << 1);
+
+ /*
+ * Insert frame in store, in case of retransmissions
+ * Increase skb reference count, see irlap_do_event()
+ */
+ skb_get(skb);
+ skb_queue_tail(&self->wx_list, skb);
+
+ /* Copy buffer */
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+ if (tx_skb == NULL) {
+ return;
+ }
+
+ /*
+ * Set poll bit if necessary. We do this to the copied
+ * skb, since retransmitted need to set or clear the poll
+ * bit depending on when they are sent.
+ */
+ tx_skb->data[1] |= PF_BIT;
+
+ self->vs = (self->vs + 1) % 8;
+ self->ack_required = FALSE;
+
+ irlap_next_state(self, LAP_NRM_P);
+ irlap_send_i_frame(self, tx_skb, CMD_FRAME);
+ } else {
+ pr_debug("%s(), sending unreliable frame\n", __func__);
+
+ if (self->ack_required) {
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+ irlap_next_state(self, LAP_NRM_P);
+ irlap_send_rr_frame(self, CMD_FRAME);
+ self->ack_required = FALSE;
+ } else {
+ skb->data[1] |= PF_BIT;
+ irlap_next_state(self, LAP_NRM_P);
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+ }
+ }
+
+ /* How much time we took for transmission of all frames.
+ * We don't know, so let assume we used the full window. Jean II */
+ transmission_time = self->final_timeout;
+
+ /* Reset parameter so that we can fill next window */
+ self->window = self->window_size;
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ /* Remove what we have not used. Just do a prorata of the
+ * bytes left in window to window capacity.
+ * See max_line_capacities[][] in qos.c for details. Jean II */
+ transmission_time -= (self->final_timeout * self->bytes_left
+ / self->line_capacity);
+ pr_debug("%s() adjusting transmission_time : ft=%d, bl=%d, lc=%d -> tt=%d\n",
+ __func__, self->final_timeout, self->bytes_left,
+ self->line_capacity, transmission_time);
+
+ /* We are allowed to transmit a maximum number of bytes again. */
+ self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+ /*
+ * The network layer has a intermediate buffer between IrLAP
+ * and the IrDA driver which can contain 8 frames. So, even
+ * though IrLAP is currently sending the *last* frame of the
+ * tx-window, the driver most likely has only just started
+ * sending the *first* frame of the same tx-window.
+ * I.e. we are always at the very beginning of or Tx window.
+ * Now, we are supposed to set the final timer from the end
+ * of our tx-window to let the other peer reply. So, we need
+ * to add extra time to compensate for the fact that we
+ * are really at the start of tx-window, otherwise the final timer
+ * might expire before he can answer...
+ * Jean II
+ */
+ irlap_start_final_timer(self, self->final_timeout + transmission_time);
+
+ /*
+ * The clever amongst you might ask why we do this adjustement
+ * only here, and not in all the other cases in irlap_event.c.
+ * In all those other case, we only send a very short management
+ * frame (few bytes), so the adjustement would be lost in the
+ * noise...
+ * The exception of course is irlap_resend_rejected_frame().
+ * Jean II */
+}
+
+/*
+ * Function irlap_send_data_secondary_final (self, skb)
+ *
+ * Send I(nformation) frame as secondary with final bit set
+ *
+ */
+void irlap_send_data_secondary_final(struct irlap_cb *self,
+ struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb = NULL;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Is this reliable or unreliable data? */
+ if (skb->data[1] == I_FRAME) {
+
+ /*
+ * Insert frame sequence number (Vs) in control field before
+ * inserting into transmit window queue.
+ */
+ skb->data[1] = I_FRAME | (self->vs << 1);
+
+ /*
+ * Insert frame in store, in case of retransmissions
+ * Increase skb reference count, see irlap_do_event()
+ */
+ skb_get(skb);
+ skb_queue_tail(&self->wx_list, skb);
+
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+ if (tx_skb == NULL) {
+ return;
+ }
+
+ tx_skb->data[1] |= PF_BIT;
+
+ self->vs = (self->vs + 1) % 8;
+ self->ack_required = FALSE;
+
+ irlap_send_i_frame(self, tx_skb, RSP_FRAME);
+ } else {
+ if (self->ack_required) {
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+ irlap_send_rr_frame(self, RSP_FRAME);
+ self->ack_required = FALSE;
+ } else {
+ skb->data[1] |= PF_BIT;
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+ }
+ }
+
+ self->window = self->window_size;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ /* We are allowed to transmit a maximum number of bytes again. */
+ self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+ irlap_start_wd_timer(self, self->wd_timeout);
+}
+
+/*
+ * Function irlap_send_data_secondary (self, skb)
+ *
+ * Send I(nformation) frame as secondary without final bit set
+ *
+ */
+void irlap_send_data_secondary(struct irlap_cb *self, struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb = NULL;
+
+ /* Is this reliable or unreliable data? */
+ if (skb->data[1] == I_FRAME) {
+
+ /*
+ * Insert frame sequence number (Vs) in control field before
+ * inserting into transmit window queue.
+ */
+ skb->data[1] = I_FRAME | (self->vs << 1);
+
+ /*
+ * Insert frame in store, in case of retransmissions
+ * Increase skb reference count, see irlap_do_event()
+ */
+ skb_get(skb);
+ skb_queue_tail(&self->wx_list, skb);
+
+ tx_skb = skb_clone(skb, GFP_ATOMIC);
+ if (tx_skb == NULL) {
+ return;
+ }
+
+ self->vs = (self->vs + 1) % 8;
+ self->ack_required = FALSE;
+ self->window -= 1;
+
+ irlap_send_i_frame(self, tx_skb, RSP_FRAME);
+ } else {
+ irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+ self->window -= 1;
+ }
+}
+
+/*
+ * Function irlap_resend_rejected_frames (nr)
+ *
+ * Resend frames which has not been acknowledged. Should be safe to
+ * traverse the list without locking it since this function will only be
+ * called from interrupt context (BH)
+ */
+void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
+{
+ struct sk_buff *tx_skb;
+ struct sk_buff *skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Resend unacknowledged frame(s) */
+ skb_queue_walk(&self->wx_list, skb) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ /* We copy the skb to be retransmitted since we will have to
+ * modify it. Cloning will confuse packet sniffers
+ */
+ /* tx_skb = skb_clone( skb, GFP_ATOMIC); */
+ tx_skb = skb_copy(skb, GFP_ATOMIC);
+ if (!tx_skb) {
+ pr_debug("%s(), unable to copy\n", __func__);
+ return;
+ }
+
+ /* Clear old Nr field + poll bit */
+ tx_skb->data[1] &= 0x0f;
+
+ /*
+ * Set poll bit on the last frame retransmitted
+ */
+ if (skb_queue_is_last(&self->wx_list, skb))
+ tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
+ else
+ tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */
+
+ irlap_send_i_frame(self, tx_skb, command);
+ }
+#if 0 /* Not yet */
+ /*
+ * We can now fill the window with additional data frames
+ */
+ while (!skb_queue_empty(&self->txq)) {
+
+ pr_debug("%s(), sending additional frames!\n", __func__);
+ if (self->window > 0) {
+ skb = skb_dequeue( &self->txq);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /*
+ * If send window > 1 then send frame with pf
+ * bit cleared
+ */
+ if ((self->window > 1) &&
+ !skb_queue_empty(&self->txq)) {
+ irlap_send_data_primary(self, skb);
+ } else {
+ irlap_send_data_primary_poll(self, skb);
+ }
+ kfree_skb(skb);
+ }
+ }
+#endif
+}
+
+void irlap_resend_rejected_frame(struct irlap_cb *self, int command)
+{
+ struct sk_buff *tx_skb;
+ struct sk_buff *skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ /* Resend unacknowledged frame(s) */
+ skb = skb_peek(&self->wx_list);
+ if (skb != NULL) {
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+
+ /* We copy the skb to be retransmitted since we will have to
+ * modify it. Cloning will confuse packet sniffers
+ */
+ /* tx_skb = skb_clone( skb, GFP_ATOMIC); */
+ tx_skb = skb_copy(skb, GFP_ATOMIC);
+ if (!tx_skb) {
+ pr_debug("%s(), unable to copy\n", __func__);
+ return;
+ }
+
+ /* Clear old Nr field + poll bit */
+ tx_skb->data[1] &= 0x0f;
+
+ /* Set poll/final bit */
+ tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
+
+ irlap_send_i_frame(self, tx_skb, command);
+ }
+}
+
+/*
+ * Function irlap_send_ui_frame (self, skb, command)
+ *
+ * Contruct and transmit an Unnumbered Information (UI) frame
+ *
+ */
+void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+ __u8 caddr, int command)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Insert connection address */
+ skb->data[0] = caddr | ((command) ? CMD_FRAME : 0);
+
+ irlap_queue_xmit(self, skb);
+}
+
+/*
+ * Function irlap_send_i_frame (skb)
+ *
+ * Contruct and transmit Information (I) frame
+ */
+static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb,
+ int command)
+{
+ /* Insert connection address */
+ skb->data[0] = self->caddr;
+ skb->data[0] |= (command) ? CMD_FRAME : 0;
+
+ /* Insert next to receive (Vr) */
+ skb->data[1] |= (self->vr << 5); /* insert nr */
+
+ irlap_queue_xmit(self, skb);
+}
+
+/*
+ * Function irlap_recv_i_frame (skb, frame)
+ *
+ * Receive and parse an I (Information) frame, no harm in making it inline
+ * since it's called only from one single place (irlap_driver_rcv).
+ */
+static inline void irlap_recv_i_frame(struct irlap_cb *self,
+ struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ info->nr = skb->data[1] >> 5; /* Next to receive */
+ info->pf = skb->data[1] & PF_BIT; /* Final bit */
+ info->ns = (skb->data[1] >> 1) & 0x07; /* Next to send */
+
+ /* Check if this is a command or a response frame */
+ if (command)
+ irlap_do_event(self, RECV_I_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_I_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_ui_frame (self, skb, info)
+ *
+ * Receive and parse an Unnumbered Information (UI) frame
+ *
+ */
+static void irlap_recv_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ info->pf = skb->data[1] & PF_BIT; /* Final bit */
+
+ irlap_do_event(self, RECV_UI_FRAME, skb, info);
+}
+
+/*
+ * Function irlap_recv_frmr_frame (skb, frame)
+ *
+ * Received Frame Reject response.
+ *
+ */
+static void irlap_recv_frmr_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info)
+{
+ __u8 *frame;
+ int w, x, y, z;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(info != NULL, return;);
+
+ if (!pskb_may_pull(skb, 4)) {
+ net_err_ratelimited("%s: frame too short!\n", __func__);
+ return;
+ }
+
+ frame = skb->data;
+
+ info->nr = frame[2] >> 5; /* Next to receive */
+ info->pf = frame[2] & PF_BIT; /* Final bit */
+ info->ns = (frame[2] >> 1) & 0x07; /* Next to send */
+
+ w = frame[3] & 0x01;
+ x = frame[3] & 0x02;
+ y = frame[3] & 0x04;
+ z = frame[3] & 0x08;
+
+ if (w) {
+ pr_debug("Rejected control field is undefined or not implemented\n");
+ }
+ if (x) {
+ pr_debug("Rejected control field was invalid because it contained a non permitted I field\n");
+ }
+ if (y) {
+ pr_debug("Received I field exceeded the maximum negotiated for the existing connection or exceeded the maximum this station supports if no connection exists\n");
+ }
+ if (z) {
+ pr_debug("Rejected control field control field contained an invalid Nr count\n");
+ }
+ irlap_do_event(self, RECV_FRMR_RSP, skb, info);
+}
+
+/*
+ * Function irlap_send_test_frame (self, daddr)
+ *
+ * Send a test frame response
+ *
+ */
+void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr,
+ struct sk_buff *cmd)
+{
+ struct sk_buff *tx_skb;
+ struct test_frame *frame;
+ __u8 *info;
+
+ tx_skb = alloc_skb(cmd->len + sizeof(struct test_frame), GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ /* Broadcast frames must include saddr and daddr fields */
+ if (caddr == CBROADCAST) {
+ frame = (struct test_frame *)
+ skb_put(tx_skb, sizeof(struct test_frame));
+
+ /* Insert the swapped addresses */
+ frame->saddr = cpu_to_le32(self->saddr);
+ frame->daddr = cpu_to_le32(daddr);
+ } else
+ frame = (struct test_frame *) skb_put(tx_skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
+
+ frame->caddr = caddr;
+ frame->control = TEST_RSP | PF_BIT;
+
+ /* Copy info */
+ info = skb_put(tx_skb, cmd->len);
+ memcpy(info, cmd->data, cmd->len);
+
+ /* Return to sender */
+ irlap_wait_min_turn_around(self, &self->qos_tx);
+ irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_test_frame (self, skb)
+ *
+ * Receive a test frame
+ *
+ */
+static void irlap_recv_test_frame(struct irlap_cb *self, struct sk_buff *skb,
+ struct irlap_info *info, int command)
+{
+ struct test_frame *frame;
+
+ if (!pskb_may_pull(skb, sizeof(*frame))) {
+ net_err_ratelimited("%s: frame too short!\n", __func__);
+ return;
+ }
+ frame = (struct test_frame *) skb->data;
+
+ /* Broadcast frames must carry saddr and daddr fields */
+ if (info->caddr == CBROADCAST) {
+ if (skb->len < sizeof(struct test_frame)) {
+ pr_debug("%s() test frame too short!\n",
+ __func__);
+ return;
+ }
+
+ /* Read and swap addresses */
+ info->daddr = le32_to_cpu(frame->saddr);
+ info->saddr = le32_to_cpu(frame->daddr);
+
+ /* Make sure frame is addressed to us */
+ if ((info->saddr != self->saddr) &&
+ (info->saddr != BROADCAST)) {
+ return;
+ }
+ }
+
+ if (command)
+ irlap_do_event(self, RECV_TEST_CMD, skb, info);
+ else
+ irlap_do_event(self, RECV_TEST_RSP, skb, info);
+}
+
+/*
+ * Function irlap_driver_rcv (skb, netdev, ptype)
+ *
+ * Called when a frame is received. Dispatches the right receive function
+ * for processing of the frame.
+ *
+ * Note on skb management :
+ * After calling the higher layers of the IrDA stack, we always
+ * kfree() the skb, which drop the reference count (and potentially
+ * destroy it).
+ * If a higher layer of the stack want to keep the skb around (to put
+ * in a queue or pass it to the higher layer), it will need to use
+ * skb_get() to keep a reference on it. This is usually done at the
+ * LMP level in irlmp.c.
+ * Jean II
+ */
+int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *ptype, struct net_device *orig_dev)
+{
+ struct irlap_info info;
+ struct irlap_cb *self;
+ int command;
+ __u8 control;
+ int ret = -1;
+
+ if (!net_eq(dev_net(dev), &init_net))
+ goto out;
+
+ /* FIXME: should we get our own field? */
+ self = (struct irlap_cb *) dev->atalk_ptr;
+
+ /* If the net device is down, then IrLAP is gone! */
+ if (!self || self->magic != LAP_MAGIC)
+ goto err;
+
+ /* We are no longer an "old" protocol, so we need to handle
+ * share and non linear skbs. This should never happen, so
+ * we don't need to be clever about it. Jean II */
+ if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
+ net_err_ratelimited("%s: can't clone shared skb!\n", __func__);
+ goto err;
+ }
+
+ /* Check if frame is large enough for parsing */
+ if (!pskb_may_pull(skb, 2)) {
+ net_err_ratelimited("%s: frame too short!\n", __func__);
+ goto err;
+ }
+
+ command = skb->data[0] & CMD_FRAME;
+ info.caddr = skb->data[0] & CBROADCAST;
+
+ info.pf = skb->data[1] & PF_BIT;
+ info.control = skb->data[1] & ~PF_BIT; /* Mask away poll/final bit */
+
+ control = info.control;
+
+ /* First we check if this frame has a valid connection address */
+ if ((info.caddr != self->caddr) && (info.caddr != CBROADCAST)) {
+ pr_debug("%s(), wrong connection address!\n",
+ __func__);
+ goto out;
+ }
+ /*
+ * Optimize for the common case and check if the frame is an
+ * I(nformation) frame. Only I-frames have bit 0 set to 0
+ */
+ if (~control & 0x01) {
+ irlap_recv_i_frame(self, skb, &info, command);
+ goto out;
+ }
+ /*
+ * We now check is the frame is an S(upervisory) frame. Only
+ * S-frames have bit 0 set to 1 and bit 1 set to 0
+ */
+ if (~control & 0x02) {
+ /*
+ * Received S(upervisory) frame, check which frame type it is
+ * only the first nibble is of interest
+ */
+ switch (control & 0x0f) {
+ case RR:
+ irlap_recv_rr_frame(self, skb, &info, command);
+ break;
+ case RNR:
+ irlap_recv_rnr_frame(self, skb, &info, command);
+ break;
+ case REJ:
+ irlap_recv_rej_frame(self, skb, &info, command);
+ break;
+ case SREJ:
+ irlap_recv_srej_frame(self, skb, &info, command);
+ break;
+ default:
+ net_warn_ratelimited("%s: Unknown S-frame %02x received!\n",
+ __func__, info.control);
+ break;
+ }
+ goto out;
+ }
+ /*
+ * This must be a C(ontrol) frame
+ */
+ switch (control) {
+ case XID_RSP:
+ irlap_recv_discovery_xid_rsp(self, skb, &info);
+ break;
+ case XID_CMD:
+ irlap_recv_discovery_xid_cmd(self, skb, &info);
+ break;
+ case SNRM_CMD:
+ irlap_recv_snrm_cmd(self, skb, &info);
+ break;
+ case DM_RSP:
+ irlap_do_event(self, RECV_DM_RSP, skb, &info);
+ break;
+ case DISC_CMD: /* And RD_RSP since they have the same value */
+ irlap_recv_disc_frame(self, skb, &info, command);
+ break;
+ case TEST_CMD:
+ irlap_recv_test_frame(self, skb, &info, command);
+ break;
+ case UA_RSP:
+ irlap_recv_ua_frame(self, skb, &info);
+ break;
+ case FRMR_RSP:
+ irlap_recv_frmr_frame(self, skb, &info);
+ break;
+ case UI_FRAME:
+ irlap_recv_ui_frame(self, skb, &info);
+ break;
+ default:
+ net_warn_ratelimited("%s: Unknown frame %02x received!\n",
+ __func__, info.control);
+ break;
+ }
+out:
+ ret = 0;
+err:
+ /* Always drop our reference on the skb */
+ dev_kfree_skb(skb);
+ return ret;
+}
diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c
new file mode 100644
index 000000000..a26c401ef
--- /dev/null
+++ b/net/irda/irlmp.c
@@ -0,0 +1,1996 @@
+/*********************************************************************
+ *
+ * Filename: irlmp.c
+ * Version: 1.0
+ * Description: IrDA Link Management Protocol (LMP) layer
+ * Status: Stable.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 17 20:54:32 1997
+ * Modified at: Wed Jan 5 11:26:03 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+
+#include <asm/unaligned.h>
+
+static __u8 irlmp_find_free_slsap(void);
+static int irlmp_slsap_inuse(__u8 slsap_sel);
+
+/* Master structure */
+struct irlmp_cb *irlmp = NULL;
+
+/* These can be altered by the sysctl interface */
+int sysctl_discovery = 0;
+int sysctl_discovery_timeout = 3; /* 3 seconds by default */
+int sysctl_discovery_slots = 6; /* 6 slots by default */
+int sysctl_lap_keepalive_time = LM_IDLE_TIMEOUT * 1000 / HZ;
+char sysctl_devname[65];
+
+static const char *irlmp_reasons[] = {
+ "ERROR, NOT USED",
+ "LM_USER_REQUEST",
+ "LM_LAP_DISCONNECT",
+ "LM_CONNECT_FAILURE",
+ "LM_LAP_RESET",
+ "LM_INIT_DISCONNECT",
+ "ERROR, NOT USED",
+ "UNKNOWN",
+};
+
+const char *irlmp_reason_str(LM_REASON reason)
+{
+ reason = min_t(size_t, reason, ARRAY_SIZE(irlmp_reasons) - 1);
+ return irlmp_reasons[reason];
+}
+
+/*
+ * Function irlmp_init (void)
+ *
+ * Create (allocate) the main IrLMP structure
+ *
+ */
+int __init irlmp_init(void)
+{
+ /* Initialize the irlmp structure. */
+ irlmp = kzalloc( sizeof(struct irlmp_cb), GFP_KERNEL);
+ if (irlmp == NULL)
+ return -ENOMEM;
+
+ irlmp->magic = LMP_MAGIC;
+
+ irlmp->clients = hashbin_new(HB_LOCK);
+ irlmp->services = hashbin_new(HB_LOCK);
+ irlmp->links = hashbin_new(HB_LOCK);
+ irlmp->unconnected_lsaps = hashbin_new(HB_LOCK);
+ irlmp->cachelog = hashbin_new(HB_NOLOCK);
+
+ if ((irlmp->clients == NULL) ||
+ (irlmp->services == NULL) ||
+ (irlmp->links == NULL) ||
+ (irlmp->unconnected_lsaps == NULL) ||
+ (irlmp->cachelog == NULL)) {
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&irlmp->cachelog->hb_spinlock);
+
+ irlmp->last_lsap_sel = 0x0f; /* Reserved 0x00-0x0f */
+ strcpy(sysctl_devname, "Linux");
+
+ init_timer(&irlmp->discovery_timer);
+
+ /* Do discovery every 3 seconds, conditionally */
+ if (sysctl_discovery)
+ irlmp_start_discovery_timer(irlmp,
+ sysctl_discovery_timeout*HZ);
+
+ return 0;
+}
+
+/*
+ * Function irlmp_cleanup (void)
+ *
+ * Remove IrLMP layer
+ *
+ */
+void irlmp_cleanup(void)
+{
+ /* Check for main structure */
+ IRDA_ASSERT(irlmp != NULL, return;);
+ IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;);
+
+ del_timer(&irlmp->discovery_timer);
+
+ hashbin_delete(irlmp->links, (FREE_FUNC) kfree);
+ hashbin_delete(irlmp->unconnected_lsaps, (FREE_FUNC) kfree);
+ hashbin_delete(irlmp->clients, (FREE_FUNC) kfree);
+ hashbin_delete(irlmp->services, (FREE_FUNC) kfree);
+ hashbin_delete(irlmp->cachelog, (FREE_FUNC) kfree);
+
+ /* De-allocate main structure */
+ kfree(irlmp);
+ irlmp = NULL;
+}
+
+/*
+ * Function irlmp_open_lsap (slsap, notify)
+ *
+ * Register with IrLMP and create a local LSAP,
+ * returns handle to LSAP.
+ */
+struct lsap_cb *irlmp_open_lsap(__u8 slsap_sel, notify_t *notify, __u8 pid)
+{
+ struct lsap_cb *self;
+
+ IRDA_ASSERT(notify != NULL, return NULL;);
+ IRDA_ASSERT(irlmp != NULL, return NULL;);
+ IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return NULL;);
+ IRDA_ASSERT(notify->instance != NULL, return NULL;);
+
+ /* Does the client care which Source LSAP selector it gets? */
+ if (slsap_sel == LSAP_ANY) {
+ slsap_sel = irlmp_find_free_slsap();
+ if (!slsap_sel)
+ return NULL;
+ } else if (irlmp_slsap_inuse(slsap_sel))
+ return NULL;
+
+ /* Allocate new instance of a LSAP connection */
+ self = kzalloc(sizeof(struct lsap_cb), GFP_ATOMIC);
+ if (self == NULL)
+ return NULL;
+
+ self->magic = LMP_LSAP_MAGIC;
+ self->slsap_sel = slsap_sel;
+
+ /* Fix connectionless LSAP's */
+ if (slsap_sel == LSAP_CONNLESS) {
+#ifdef CONFIG_IRDA_ULTRA
+ self->dlsap_sel = LSAP_CONNLESS;
+ self->pid = pid;
+#endif /* CONFIG_IRDA_ULTRA */
+ } else
+ self->dlsap_sel = LSAP_ANY;
+ /* self->connected = FALSE; -> already NULL via memset() */
+
+ init_timer(&self->watchdog_timer);
+
+ self->notify = *notify;
+
+ self->lsap_state = LSAP_DISCONNECTED;
+
+ /* Insert into queue of unconnected LSAPs */
+ hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self,
+ (long) self, NULL);
+
+ return self;
+}
+EXPORT_SYMBOL(irlmp_open_lsap);
+
+/*
+ * Function __irlmp_close_lsap (self)
+ *
+ * Remove an instance of LSAP
+ */
+static void __irlmp_close_lsap(struct lsap_cb *self)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+ /*
+ * Set some of the variables to preset values
+ */
+ self->magic = 0;
+ del_timer(&self->watchdog_timer); /* Important! */
+
+ if (self->conn_skb)
+ dev_kfree_skb(self->conn_skb);
+
+ kfree(self);
+}
+
+/*
+ * Function irlmp_close_lsap (self)
+ *
+ * Close and remove LSAP
+ *
+ */
+void irlmp_close_lsap(struct lsap_cb *self)
+{
+ struct lap_cb *lap;
+ struct lsap_cb *lsap = NULL;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+ /*
+ * Find out if we should remove this LSAP from a link or from the
+ * list of unconnected lsaps (not associated with a link)
+ */
+ lap = self->lap;
+ if (lap) {
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+ /* We might close a LSAP before it has completed the
+ * connection setup. In those case, higher layers won't
+ * send a proper disconnect request. Harmless, except
+ * that we will forget to close LAP... - Jean II */
+ if(self->lsap_state != LSAP_DISCONNECTED) {
+ self->lsap_state = LSAP_DISCONNECTED;
+ irlmp_do_lap_event(self->lap,
+ LM_LAP_DISCONNECT_REQUEST, NULL);
+ }
+ /* Now, remove from the link */
+ lsap = hashbin_remove(lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ lap->cache.valid = FALSE;
+#endif
+ }
+ self->lap = NULL;
+ /* Check if we found the LSAP! If not then try the unconnected lsaps */
+ if (!lsap) {
+ lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self,
+ NULL);
+ }
+ if (!lsap) {
+ pr_debug("%s(), Looks like somebody has removed me already!\n",
+ __func__);
+ return;
+ }
+ __irlmp_close_lsap(self);
+}
+EXPORT_SYMBOL(irlmp_close_lsap);
+
+/*
+ * Function irlmp_register_irlap (saddr, notify)
+ *
+ * Register IrLAP layer with IrLMP. There is possible to have multiple
+ * instances of the IrLAP layer, each connected to different IrDA ports
+ *
+ */
+void irlmp_register_link(struct irlap_cb *irlap, __u32 saddr, notify_t *notify)
+{
+ struct lap_cb *lap;
+
+ IRDA_ASSERT(irlmp != NULL, return;);
+ IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;);
+ IRDA_ASSERT(notify != NULL, return;);
+
+ /*
+ * Allocate new instance of a LSAP connection
+ */
+ lap = kzalloc(sizeof(struct lap_cb), GFP_KERNEL);
+ if (lap == NULL)
+ return;
+
+ lap->irlap = irlap;
+ lap->magic = LMP_LAP_MAGIC;
+ lap->saddr = saddr;
+ lap->daddr = DEV_ADDR_ANY;
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ lap->cache.valid = FALSE;
+#endif
+ lap->lsaps = hashbin_new(HB_LOCK);
+ if (lap->lsaps == NULL) {
+ net_warn_ratelimited("%s(), unable to kmalloc lsaps\n",
+ __func__);
+ kfree(lap);
+ return;
+ }
+
+ lap->lap_state = LAP_STANDBY;
+
+ init_timer(&lap->idle_timer);
+
+ /*
+ * Insert into queue of LMP links
+ */
+ hashbin_insert(irlmp->links, (irda_queue_t *) lap, lap->saddr, NULL);
+
+ /*
+ * We set only this variable so IrLAP can tell us on which link the
+ * different events happened on
+ */
+ irda_notify_init(notify);
+ notify->instance = lap;
+}
+
+/*
+ * Function irlmp_unregister_irlap (saddr)
+ *
+ * IrLAP layer has been removed!
+ *
+ */
+void irlmp_unregister_link(__u32 saddr)
+{
+ struct lap_cb *link;
+
+ /* We must remove ourselves from the hashbin *first*. This ensure
+ * that no more LSAPs will be open on this link and no discovery
+ * will be triggered anymore. Jean II */
+ link = hashbin_remove(irlmp->links, saddr, NULL);
+ if (link) {
+ IRDA_ASSERT(link->magic == LMP_LAP_MAGIC, return;);
+
+ /* Kill all the LSAPs on this link. Jean II */
+ link->reason = LAP_DISC_INDICATION;
+ link->daddr = DEV_ADDR_ANY;
+ irlmp_do_lap_event(link, LM_LAP_DISCONNECT_INDICATION, NULL);
+
+ /* Remove all discoveries discovered at this link */
+ irlmp_expire_discoveries(irlmp->cachelog, link->saddr, TRUE);
+
+ /* Final cleanup */
+ del_timer(&link->idle_timer);
+ link->magic = 0;
+ hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap);
+ kfree(link);
+ }
+}
+
+/*
+ * Function irlmp_connect_request (handle, dlsap, userdata)
+ *
+ * Connect with a peer LSAP
+ *
+ */
+int irlmp_connect_request(struct lsap_cb *self, __u8 dlsap_sel,
+ __u32 saddr, __u32 daddr,
+ struct qos_info *qos, struct sk_buff *userdata)
+{
+ struct sk_buff *tx_skb = userdata;
+ struct lap_cb *lap;
+ struct lsap_cb *lsap;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -EBADR;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EBADR;);
+
+ pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x, saddr=%08x, daddr=%08x\n",
+ __func__, self->slsap_sel, dlsap_sel, saddr, daddr);
+
+ if (test_bit(0, &self->connected)) {
+ ret = -EISCONN;
+ goto err;
+ }
+
+ /* Client must supply destination device address */
+ if (!daddr) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* Any userdata? */
+ if (tx_skb == NULL) {
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+ }
+
+ /* Make room for MUX control header (3 bytes) */
+ IRDA_ASSERT(skb_headroom(tx_skb) >= LMP_CONTROL_HEADER, return -1;);
+ skb_push(tx_skb, LMP_CONTROL_HEADER);
+
+ self->dlsap_sel = dlsap_sel;
+
+ /*
+ * Find the link to where we should try to connect since there may
+ * be more than one IrDA port on this machine. If the client has
+ * passed us the saddr (and already knows which link to use), then
+ * we use that to find the link, if not then we have to look in the
+ * discovery log and check if any of the links has discovered a
+ * device with the given daddr
+ */
+ if ((!saddr) || (saddr == DEV_ADDR_ANY)) {
+ discovery_t *discovery;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irlmp->cachelog->hb_spinlock, flags);
+ if (daddr != DEV_ADDR_ANY)
+ discovery = hashbin_find(irlmp->cachelog, daddr, NULL);
+ else {
+ pr_debug("%s(), no daddr\n", __func__);
+ discovery = (discovery_t *)
+ hashbin_get_first(irlmp->cachelog);
+ }
+
+ if (discovery) {
+ saddr = discovery->data.saddr;
+ daddr = discovery->data.daddr;
+ }
+ spin_unlock_irqrestore(&irlmp->cachelog->hb_spinlock, flags);
+ }
+ lap = hashbin_lock_find(irlmp->links, saddr, NULL);
+ if (lap == NULL) {
+ pr_debug("%s(), Unable to find a usable link!\n", __func__);
+ ret = -EHOSTUNREACH;
+ goto err;
+ }
+
+ /* Check if LAP is disconnected or already connected */
+ if (lap->daddr == DEV_ADDR_ANY)
+ lap->daddr = daddr;
+ else if (lap->daddr != daddr) {
+ /* Check if some LSAPs are active on this LAP */
+ if (HASHBIN_GET_SIZE(lap->lsaps) == 0) {
+ /* No active connection, but LAP hasn't been
+ * disconnected yet (waiting for timeout in LAP).
+ * Maybe we could give LAP a bit of help in this case.
+ */
+ pr_debug("%s(), sorry, but I'm waiting for LAP to timeout!\n",
+ __func__);
+ ret = -EAGAIN;
+ goto err;
+ }
+
+ /* LAP is already connected to a different node, and LAP
+ * can only talk to one node at a time */
+ pr_debug("%s(), sorry, but link is busy!\n", __func__);
+ ret = -EBUSY;
+ goto err;
+ }
+
+ self->lap = lap;
+
+ /*
+ * Remove LSAP from list of unconnected LSAPs and insert it into the
+ * list of connected LSAPs for the particular link
+ */
+ lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, NULL);
+
+ IRDA_ASSERT(lsap != NULL, return -1;);
+ IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;);
+ IRDA_ASSERT(lsap->lap != NULL, return -1;);
+ IRDA_ASSERT(lsap->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+ hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, (long) self,
+ NULL);
+
+ set_bit(0, &self->connected); /* TRUE */
+
+ /*
+ * User supplied qos specifications?
+ */
+ if (qos)
+ self->qos = *qos;
+
+ irlmp_do_lsap_event(self, LM_CONNECT_REQUEST, tx_skb);
+
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(tx_skb);
+
+ return 0;
+
+err:
+ /* Cleanup */
+ if(tx_skb)
+ dev_kfree_skb(tx_skb);
+ return ret;
+}
+EXPORT_SYMBOL(irlmp_connect_request);
+
+/*
+ * Function irlmp_connect_indication (self)
+ *
+ * Incoming connection
+ *
+ */
+void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+ int max_seg_size;
+ int lap_header_size;
+ int max_header_size;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(self->lap != NULL, return;);
+
+ pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+ __func__, self->slsap_sel, self->dlsap_sel);
+
+ /* Note : self->lap is set in irlmp_link_data_indication(),
+ * (case CONNECT_CMD:) because we have no way to set it here.
+ * Similarly, self->dlsap_sel is usually set in irlmp_find_lsap().
+ * Jean II */
+
+ self->qos = *self->lap->qos;
+
+ max_seg_size = self->lap->qos->data_size.value-LMP_HEADER;
+ lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap);
+ max_header_size = LMP_HEADER + lap_header_size;
+
+ /* Hide LMP_CONTROL_HEADER header from layer above */
+ skb_pull(skb, LMP_CONTROL_HEADER);
+
+ if (self->notify.connect_indication) {
+ /* Don't forget to refcount it - see irlap_driver_rcv(). */
+ skb_get(skb);
+ self->notify.connect_indication(self->notify.instance, self,
+ &self->qos, max_seg_size,
+ max_header_size, skb);
+ }
+}
+
+/*
+ * Function irlmp_connect_response (handle, userdata)
+ *
+ * Service user is accepting connection
+ *
+ */
+int irlmp_connect_response(struct lsap_cb *self, struct sk_buff *userdata)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+ IRDA_ASSERT(userdata != NULL, return -1;);
+
+ /* We set the connected bit and move the lsap to the connected list
+ * in the state machine itself. Jean II */
+
+ pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+ __func__, self->slsap_sel, self->dlsap_sel);
+
+ /* Make room for MUX control header (3 bytes) */
+ IRDA_ASSERT(skb_headroom(userdata) >= LMP_CONTROL_HEADER, return -1;);
+ skb_push(userdata, LMP_CONTROL_HEADER);
+
+ irlmp_do_lsap_event(self, LM_CONNECT_RESPONSE, userdata);
+
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(userdata);
+
+ return 0;
+}
+EXPORT_SYMBOL(irlmp_connect_response);
+
+/*
+ * Function irlmp_connect_confirm (handle, skb)
+ *
+ * LSAP connection confirmed peer device!
+ */
+void irlmp_connect_confirm(struct lsap_cb *self, struct sk_buff *skb)
+{
+ int max_header_size;
+ int lap_header_size;
+ int max_seg_size;
+
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+ IRDA_ASSERT(self->lap != NULL, return;);
+
+ self->qos = *self->lap->qos;
+
+ max_seg_size = self->lap->qos->data_size.value-LMP_HEADER;
+ lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap);
+ max_header_size = LMP_HEADER + lap_header_size;
+
+ pr_debug("%s(), max_header_size=%d\n",
+ __func__, max_header_size);
+
+ /* Hide LMP_CONTROL_HEADER header from layer above */
+ skb_pull(skb, LMP_CONTROL_HEADER);
+
+ if (self->notify.connect_confirm) {
+ /* Don't forget to refcount it - see irlap_driver_rcv() */
+ skb_get(skb);
+ self->notify.connect_confirm(self->notify.instance, self,
+ &self->qos, max_seg_size,
+ max_header_size, skb);
+ }
+}
+
+/*
+ * Function irlmp_dup (orig, instance)
+ *
+ * Duplicate LSAP, can be used by servers to confirm a connection on a
+ * new LSAP so it can keep listening on the old one.
+ *
+ */
+struct lsap_cb *irlmp_dup(struct lsap_cb *orig, void *instance)
+{
+ struct lsap_cb *new;
+ unsigned long flags;
+
+ spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+ /* Only allowed to duplicate unconnected LSAP's, and only LSAPs
+ * that have received a connect indication. Jean II */
+ if ((!hashbin_find(irlmp->unconnected_lsaps, (long) orig, NULL)) ||
+ (orig->lap == NULL)) {
+ pr_debug("%s(), invalid LSAP (wrong state)\n",
+ __func__);
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock,
+ flags);
+ return NULL;
+ }
+
+ /* Allocate a new instance */
+ new = kmemdup(orig, sizeof(*new), GFP_ATOMIC);
+ if (!new) {
+ pr_debug("%s(), unable to kmalloc\n", __func__);
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock,
+ flags);
+ return NULL;
+ }
+ /* new->lap = orig->lap; => done in the memcpy() */
+ /* new->slsap_sel = orig->slsap_sel; => done in the memcpy() */
+ new->conn_skb = NULL;
+
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+ /* Not everything is the same */
+ new->notify.instance = instance;
+
+ init_timer(&new->watchdog_timer);
+
+ hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) new,
+ (long) new, NULL);
+
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ /* Make sure that we invalidate the LSAP cache */
+ new->lap->cache.valid = FALSE;
+#endif /* CONFIG_IRDA_CACHE_LAST_LSAP */
+
+ return new;
+}
+
+/*
+ * Function irlmp_disconnect_request (handle, userdata)
+ *
+ * The service user is requesting disconnection, this will not remove the
+ * LSAP, but only mark it as disconnected
+ */
+int irlmp_disconnect_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+ struct lsap_cb *lsap;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+ IRDA_ASSERT(userdata != NULL, return -1;);
+
+ /* Already disconnected ?
+ * There is a race condition between irlmp_disconnect_indication()
+ * and us that might mess up the hashbins below. This fixes it.
+ * Jean II */
+ if (! test_and_clear_bit(0, &self->connected)) {
+ pr_debug("%s(), already disconnected!\n", __func__);
+ dev_kfree_skb(userdata);
+ return -1;
+ }
+
+ skb_push(userdata, LMP_CONTROL_HEADER);
+
+ /*
+ * Do the event before the other stuff since we must know
+ * which lap layer that the frame should be transmitted on
+ */
+ irlmp_do_lsap_event(self, LM_DISCONNECT_REQUEST, userdata);
+
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(userdata);
+
+ /*
+ * Remove LSAP from list of connected LSAPs for the particular link
+ * and insert it into the list of unconnected LSAPs
+ */
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+ IRDA_ASSERT(self->lap->lsaps != NULL, return -1;);
+
+ lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ self->lap->cache.valid = FALSE;
+#endif
+
+ IRDA_ASSERT(lsap != NULL, return -1;);
+ IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;);
+ IRDA_ASSERT(lsap == self, return -1;);
+
+ hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self,
+ (long) self, NULL);
+
+ /* Reset some values */
+ self->dlsap_sel = LSAP_ANY;
+ self->lap = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL(irlmp_disconnect_request);
+
+/*
+ * Function irlmp_disconnect_indication (reason, userdata)
+ *
+ * LSAP is being closed!
+ */
+void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason,
+ struct sk_buff *skb)
+{
+ struct lsap_cb *lsap;
+
+ pr_debug("%s(), reason=%s [%d]\n", __func__,
+ irlmp_reason_str(reason), reason);
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+ pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+ __func__, self->slsap_sel, self->dlsap_sel);
+
+ /* Already disconnected ?
+ * There is a race condition between irlmp_disconnect_request()
+ * and us that might mess up the hashbins below. This fixes it.
+ * Jean II */
+ if (! test_and_clear_bit(0, &self->connected)) {
+ pr_debug("%s(), already disconnected!\n", __func__);
+ return;
+ }
+
+ /*
+ * Remove association between this LSAP and the link it used
+ */
+ IRDA_ASSERT(self->lap != NULL, return;);
+ IRDA_ASSERT(self->lap->lsaps != NULL, return;);
+
+ lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ self->lap->cache.valid = FALSE;
+#endif
+
+ IRDA_ASSERT(lsap != NULL, return;);
+ IRDA_ASSERT(lsap == self, return;);
+ hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) lsap,
+ (long) lsap, NULL);
+
+ self->dlsap_sel = LSAP_ANY;
+ self->lap = NULL;
+
+ /*
+ * Inform service user
+ */
+ if (self->notify.disconnect_indication) {
+ /* Don't forget to refcount it - see irlap_driver_rcv(). */
+ if(skb)
+ skb_get(skb);
+ self->notify.disconnect_indication(self->notify.instance,
+ self, reason, skb);
+ } else {
+ pr_debug("%s(), no handler\n", __func__);
+ }
+}
+
+/*
+ * Function irlmp_do_expiry (void)
+ *
+ * Do a cleanup of the discovery log (remove old entries)
+ *
+ * Note : separate from irlmp_do_discovery() so that we can handle
+ * passive discovery properly.
+ */
+void irlmp_do_expiry(void)
+{
+ struct lap_cb *lap;
+
+ /*
+ * Expire discovery on all links which are *not* connected.
+ * On links which are connected, we can't do discovery
+ * anymore and can't refresh the log, so we freeze the
+ * discovery log to keep info about the device we are
+ * connected to.
+ * This info is mandatory if we want irlmp_connect_request()
+ * to work properly. - Jean II
+ */
+ lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+ while (lap != NULL) {
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+ if (lap->lap_state == LAP_STANDBY) {
+ /* Expire discoveries discovered on this link */
+ irlmp_expire_discoveries(irlmp->cachelog, lap->saddr,
+ FALSE);
+ }
+ lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+ }
+}
+
+/*
+ * Function irlmp_do_discovery (nslots)
+ *
+ * Do some discovery on all links
+ *
+ * Note : log expiry is done above.
+ */
+void irlmp_do_discovery(int nslots)
+{
+ struct lap_cb *lap;
+ __u16 *data_hintsp;
+
+ /* Make sure the value is sane */
+ if ((nslots != 1) && (nslots != 6) && (nslots != 8) && (nslots != 16)){
+ net_warn_ratelimited("%s: invalid value for number of slots!\n",
+ __func__);
+ nslots = sysctl_discovery_slots = 8;
+ }
+
+ /* Construct new discovery info to be used by IrLAP, */
+ data_hintsp = (__u16 *) irlmp->discovery_cmd.data.hints;
+ put_unaligned(irlmp->hints.word, data_hintsp);
+
+ /*
+ * Set character set for device name (we use ASCII), and
+ * copy device name. Remember to make room for a \0 at the
+ * end
+ */
+ irlmp->discovery_cmd.data.charset = CS_ASCII;
+ strncpy(irlmp->discovery_cmd.data.info, sysctl_devname,
+ NICKNAME_MAX_LEN);
+ irlmp->discovery_cmd.name_len = strlen(irlmp->discovery_cmd.data.info);
+ irlmp->discovery_cmd.nslots = nslots;
+
+ /*
+ * Try to send discovery packets on all links
+ */
+ lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+ while (lap != NULL) {
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+ if (lap->lap_state == LAP_STANDBY) {
+ /* Try to discover */
+ irlmp_do_lap_event(lap, LM_LAP_DISCOVERY_REQUEST,
+ NULL);
+ }
+ lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+ }
+}
+
+/*
+ * Function irlmp_discovery_request (nslots)
+ *
+ * Do a discovery of devices in front of the computer
+ *
+ * If the caller has registered a client discovery callback, this
+ * allow him to receive the full content of the discovery log through
+ * this callback (as normally he will receive only new discoveries).
+ */
+void irlmp_discovery_request(int nslots)
+{
+ /* Return current cached discovery log (in full) */
+ irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_LOG);
+
+ /*
+ * Start a single discovery operation if discovery is not already
+ * running
+ */
+ if (!sysctl_discovery) {
+ /* Check if user wants to override the default */
+ if (nslots == DISCOVERY_DEFAULT_SLOTS)
+ nslots = sysctl_discovery_slots;
+
+ irlmp_do_discovery(nslots);
+ /* Note : we never do expiry here. Expiry will run on the
+ * discovery timer regardless of the state of sysctl_discovery
+ * Jean II */
+ }
+}
+EXPORT_SYMBOL(irlmp_discovery_request);
+
+/*
+ * Function irlmp_get_discoveries (pn, mask, slots)
+ *
+ * Return the current discovery log
+ *
+ * If discovery is not enabled, you should call this function again
+ * after 1 or 2 seconds (i.e. after discovery has been done).
+ */
+struct irda_device_info *irlmp_get_discoveries(int *pn, __u16 mask, int nslots)
+{
+ /* If discovery is not enabled, it's likely that the discovery log
+ * will be empty. So, we trigger a single discovery, so that next
+ * time the user call us there might be some results in the log.
+ * Jean II
+ */
+ if (!sysctl_discovery) {
+ /* Check if user wants to override the default */
+ if (nslots == DISCOVERY_DEFAULT_SLOTS)
+ nslots = sysctl_discovery_slots;
+
+ /* Start discovery - will complete sometime later */
+ irlmp_do_discovery(nslots);
+ /* Note : we never do expiry here. Expiry will run on the
+ * discovery timer regardless of the state of sysctl_discovery
+ * Jean II */
+ }
+
+ /* Return current cached discovery log */
+ return irlmp_copy_discoveries(irlmp->cachelog, pn, mask, TRUE);
+}
+EXPORT_SYMBOL(irlmp_get_discoveries);
+
+/*
+ * Function irlmp_notify_client (log)
+ *
+ * Notify all about discovered devices
+ *
+ * Clients registered with IrLMP are :
+ * o IrComm
+ * o IrLAN
+ * o Any socket (in any state - ouch, that may be a lot !)
+ * The client may have defined a callback to be notified in case of
+ * partial/selective discovery based on the hints that it passed to IrLMP.
+ */
+static inline void
+irlmp_notify_client(irlmp_client_t *client,
+ hashbin_t *log, DISCOVERY_MODE mode)
+{
+ discinfo_t *discoveries; /* Copy of the discovery log */
+ int number; /* Number of nodes in the log */
+ int i;
+
+ /* Check if client wants or not partial/selective log (optimisation) */
+ if (!client->disco_callback)
+ return;
+
+ /*
+ * Locking notes :
+ * the old code was manipulating the log directly, which was
+ * very racy. Now, we use copy_discoveries, that protects
+ * itself while dumping the log for us.
+ * The overhead of the copy is compensated by the fact that
+ * we only pass new discoveries in normal mode and don't
+ * pass the same old entry every 3s to the caller as we used
+ * to do (virtual function calling is expensive).
+ * Jean II
+ */
+
+ /*
+ * Now, check all discovered devices (if any), and notify client
+ * only about the services that the client is interested in
+ * We also notify only about the new devices unless the caller
+ * explicitly request a dump of the log. Jean II
+ */
+ discoveries = irlmp_copy_discoveries(log, &number,
+ client->hint_mask.word,
+ (mode == DISCOVERY_LOG));
+ /* Check if the we got some results */
+ if (discoveries == NULL)
+ return; /* No nodes discovered */
+
+ /* Pass all entries to the listener */
+ for(i = 0; i < number; i++)
+ client->disco_callback(&(discoveries[i]), mode, client->priv);
+
+ /* Free up our buffer */
+ kfree(discoveries);
+}
+
+/*
+ * Function irlmp_discovery_confirm ( self, log)
+ *
+ * Some device(s) answered to our discovery request! Check to see which
+ * device it is, and give indication to the client(s)
+ *
+ */
+void irlmp_discovery_confirm(hashbin_t *log, DISCOVERY_MODE mode)
+{
+ irlmp_client_t *client;
+ irlmp_client_t *client_next;
+
+ IRDA_ASSERT(log != NULL, return;);
+
+ if (!(HASHBIN_GET_SIZE(log)))
+ return;
+
+ /* For each client - notify callback may touch client list */
+ client = (irlmp_client_t *) hashbin_get_first(irlmp->clients);
+ while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL,
+ (void *) &client_next) ) {
+ /* Check if we should notify client */
+ irlmp_notify_client(client, log, mode);
+
+ client = client_next;
+ }
+}
+
+/*
+ * Function irlmp_discovery_expiry (expiry)
+ *
+ * This device is no longer been discovered, and therefore it is being
+ * purged from the discovery log. Inform all clients who have
+ * registered for this event...
+ *
+ * Note : called exclusively from discovery.c
+ * Note : this is no longer called under discovery spinlock, so the
+ * client can do whatever he wants in the callback.
+ */
+void irlmp_discovery_expiry(discinfo_t *expiries, int number)
+{
+ irlmp_client_t *client;
+ irlmp_client_t *client_next;
+ int i;
+
+ IRDA_ASSERT(expiries != NULL, return;);
+
+ /* For each client - notify callback may touch client list */
+ client = (irlmp_client_t *) hashbin_get_first(irlmp->clients);
+ while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL,
+ (void *) &client_next) ) {
+
+ /* Pass all entries to the listener */
+ for(i = 0; i < number; i++) {
+ /* Check if we should notify client */
+ if ((client->expir_callback) &&
+ (client->hint_mask.word &
+ get_unaligned((__u16 *)expiries[i].hints)
+ & 0x7f7f) )
+ client->expir_callback(&(expiries[i]),
+ EXPIRY_TIMEOUT,
+ client->priv);
+ }
+
+ /* Next client */
+ client = client_next;
+ }
+}
+
+/*
+ * Function irlmp_get_discovery_response ()
+ *
+ * Used by IrLAP to get the discovery info it needs when answering
+ * discovery requests by other devices.
+ */
+discovery_t *irlmp_get_discovery_response(void)
+{
+ IRDA_ASSERT(irlmp != NULL, return NULL;);
+
+ put_unaligned(irlmp->hints.word, (__u16 *)irlmp->discovery_rsp.data.hints);
+
+ /*
+ * Set character set for device name (we use ASCII), and
+ * copy device name. Remember to make room for a \0 at the
+ * end
+ */
+ irlmp->discovery_rsp.data.charset = CS_ASCII;
+
+ strncpy(irlmp->discovery_rsp.data.info, sysctl_devname,
+ NICKNAME_MAX_LEN);
+ irlmp->discovery_rsp.name_len = strlen(irlmp->discovery_rsp.data.info);
+
+ return &irlmp->discovery_rsp;
+}
+
+/*
+ * Function irlmp_data_request (self, skb)
+ *
+ * Send some data to peer device
+ *
+ * Note on skb management :
+ * After calling the lower layers of the IrDA stack, we always
+ * kfree() the skb, which drop the reference count (and potentially
+ * destroy it).
+ * IrLMP and IrLAP may queue the packet, and in those cases will need
+ * to use skb_get() to keep it around.
+ * Jean II
+ */
+int irlmp_data_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ /* Make room for MUX header */
+ IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;);
+ skb_push(userdata, LMP_HEADER);
+
+ ret = irlmp_do_lsap_event(self, LM_DATA_REQUEST, userdata);
+
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(userdata);
+
+ return ret;
+}
+EXPORT_SYMBOL(irlmp_data_request);
+
+/*
+ * Function irlmp_data_indication (handle, skb)
+ *
+ * Got data from LAP layer so pass it up to upper layer
+ *
+ */
+void irlmp_data_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+ /* Hide LMP header from layer above */
+ skb_pull(skb, LMP_HEADER);
+
+ if (self->notify.data_indication) {
+ /* Don't forget to refcount it - see irlap_driver_rcv(). */
+ skb_get(skb);
+ self->notify.data_indication(self->notify.instance, self, skb);
+ }
+}
+
+/*
+ * Function irlmp_udata_request (self, skb)
+ */
+int irlmp_udata_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+ int ret;
+
+ IRDA_ASSERT(userdata != NULL, return -1;);
+
+ /* Make room for MUX header */
+ IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;);
+ skb_push(userdata, LMP_HEADER);
+
+ ret = irlmp_do_lsap_event(self, LM_UDATA_REQUEST, userdata);
+
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(userdata);
+
+ return ret;
+}
+
+/*
+ * Function irlmp_udata_indication (self, skb)
+ *
+ * Send unreliable data (but still within the connection)
+ *
+ */
+void irlmp_udata_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Hide LMP header from layer above */
+ skb_pull(skb, LMP_HEADER);
+
+ if (self->notify.udata_indication) {
+ /* Don't forget to refcount it - see irlap_driver_rcv(). */
+ skb_get(skb);
+ self->notify.udata_indication(self->notify.instance, self,
+ skb);
+ }
+}
+
+/*
+ * Function irlmp_connless_data_request (self, skb)
+ */
+#ifdef CONFIG_IRDA_ULTRA
+int irlmp_connless_data_request(struct lsap_cb *self, struct sk_buff *userdata,
+ __u8 pid)
+{
+ struct sk_buff *clone_skb;
+ struct lap_cb *lap;
+
+ IRDA_ASSERT(userdata != NULL, return -1;);
+
+ /* Make room for MUX and PID header */
+ IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER+LMP_PID_HEADER,
+ return -1;);
+
+ /* Insert protocol identifier */
+ skb_push(userdata, LMP_PID_HEADER);
+ if(self != NULL)
+ userdata->data[0] = self->pid;
+ else
+ userdata->data[0] = pid;
+
+ /* Connectionless sockets must use 0x70 */
+ skb_push(userdata, LMP_HEADER);
+ userdata->data[0] = userdata->data[1] = LSAP_CONNLESS;
+
+ /* Try to send Connectionless packets out on all links */
+ lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+ while (lap != NULL) {
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return -1;);
+
+ clone_skb = skb_clone(userdata, GFP_ATOMIC);
+ if (!clone_skb) {
+ dev_kfree_skb(userdata);
+ return -ENOMEM;
+ }
+
+ irlap_unitdata_request(lap->irlap, clone_skb);
+ /* irlap_unitdata_request() don't increase refcount,
+ * so no dev_kfree_skb() - Jean II */
+
+ lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+ }
+ dev_kfree_skb(userdata);
+
+ return 0;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlmp_connless_data_indication (self, skb)
+ *
+ * Receive unreliable data outside any connection. Mostly used by Ultra
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_connless_data_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /* Hide LMP and PID header from layer above */
+ skb_pull(skb, LMP_HEADER+LMP_PID_HEADER);
+
+ if (self->notify.udata_indication) {
+ /* Don't forget to refcount it - see irlap_driver_rcv(). */
+ skb_get(skb);
+ self->notify.udata_indication(self->notify.instance, self,
+ skb);
+ }
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Propagate status indication from LAP to LSAPs (via LMP)
+ * This don't trigger any change of state in lap_cb, lmp_cb or lsap_cb,
+ * and the event is stateless, therefore we can bypass both state machines
+ * and send the event direct to the LSAP user.
+ * Jean II
+ */
+void irlmp_status_indication(struct lap_cb *self,
+ LINK_STATUS link, LOCK_STATUS lock)
+{
+ struct lsap_cb *next;
+ struct lsap_cb *curr;
+
+ /* Send status_indication to all LSAPs using this link */
+ curr = (struct lsap_cb *) hashbin_get_first( self->lsaps);
+ while (NULL != hashbin_find_next(self->lsaps, (long) curr, NULL,
+ (void *) &next) ) {
+ IRDA_ASSERT(curr->magic == LMP_LSAP_MAGIC, return;);
+ /*
+ * Inform service user if he has requested it
+ */
+ if (curr->notify.status_indication != NULL)
+ curr->notify.status_indication(curr->notify.instance,
+ link, lock);
+ else
+ pr_debug("%s(), no handler\n", __func__);
+
+ curr = next;
+ }
+}
+
+/*
+ * Receive flow control indication from LAP.
+ * LAP want us to send it one more frame. We implement a simple round
+ * robin scheduler between the active sockets so that we get a bit of
+ * fairness. Note that the round robin is far from perfect, but it's
+ * better than nothing.
+ * We then poll the selected socket so that we can do synchronous
+ * refilling of IrLAP (which allow to minimise the number of buffers).
+ * Jean II
+ */
+void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow)
+{
+ struct lsap_cb *next;
+ struct lsap_cb *curr;
+ int lsap_todo;
+
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+ IRDA_ASSERT(flow == FLOW_START, return;);
+
+ /* Get the number of lsap. That's the only safe way to know
+ * that we have looped around... - Jean II */
+ lsap_todo = HASHBIN_GET_SIZE(self->lsaps);
+ pr_debug("%s() : %d lsaps to scan\n", __func__, lsap_todo);
+
+ /* Poll lsap in order until the queue is full or until we
+ * tried them all.
+ * Most often, the current LSAP will have something to send,
+ * so we will go through this loop only once. - Jean II */
+ while((lsap_todo--) &&
+ (IRLAP_GET_TX_QUEUE_LEN(self->irlap) < LAP_HIGH_THRESHOLD)) {
+ /* Try to find the next lsap we should poll. */
+ next = self->flow_next;
+ /* If we have no lsap, restart from first one */
+ if(next == NULL)
+ next = (struct lsap_cb *) hashbin_get_first(self->lsaps);
+ /* Verify current one and find the next one */
+ curr = hashbin_find_next(self->lsaps, (long) next, NULL,
+ (void *) &self->flow_next);
+ /* Uh-oh... Paranoia */
+ if(curr == NULL)
+ break;
+ pr_debug("%s() : curr is %p, next was %p and is now %p, still %d to go - queue len = %d\n",
+ __func__, curr, next, self->flow_next, lsap_todo,
+ IRLAP_GET_TX_QUEUE_LEN(self->irlap));
+
+ /* Inform lsap user that it can send one more packet. */
+ if (curr->notify.flow_indication != NULL)
+ curr->notify.flow_indication(curr->notify.instance,
+ curr, flow);
+ else
+ pr_debug("%s(), no handler\n", __func__);
+ }
+}
+
+#if 0
+/*
+ * Function irlmp_hint_to_service (hint)
+ *
+ * Returns a list of all servics contained in the given hint bits. This
+ * function assumes that the hint bits have the size of two bytes only
+ */
+__u8 *irlmp_hint_to_service(__u8 *hint)
+{
+ __u8 *service;
+ int i = 0;
+
+ /*
+ * Allocate array to store services in. 16 entries should be safe
+ * since we currently only support 2 hint bytes
+ */
+ service = kmalloc(16, GFP_ATOMIC);
+ if (!service)
+ return NULL;
+
+ if (!hint[0]) {
+ pr_debug("<None>\n");
+ kfree(service);
+ return NULL;
+ }
+ if (hint[0] & HINT_PNP)
+ pr_debug("PnP Compatible ");
+ if (hint[0] & HINT_PDA)
+ pr_debug("PDA/Palmtop ");
+ if (hint[0] & HINT_COMPUTER)
+ pr_debug("Computer ");
+ if (hint[0] & HINT_PRINTER) {
+ pr_debug("Printer ");
+ service[i++] = S_PRINTER;
+ }
+ if (hint[0] & HINT_MODEM)
+ pr_debug("Modem ");
+ if (hint[0] & HINT_FAX)
+ pr_debug("Fax ");
+ if (hint[0] & HINT_LAN) {
+ pr_debug("LAN Access ");
+ service[i++] = S_LAN;
+ }
+ /*
+ * Test if extension byte exists. This byte will usually be
+ * there, but this is not really required by the standard.
+ * (IrLMP p. 29)
+ */
+ if (hint[0] & HINT_EXTENSION) {
+ if (hint[1] & HINT_TELEPHONY) {
+ pr_debug("Telephony ");
+ service[i++] = S_TELEPHONY;
+ }
+ if (hint[1] & HINT_FILE_SERVER)
+ pr_debug("File Server ");
+
+ if (hint[1] & HINT_COMM) {
+ pr_debug("IrCOMM ");
+ service[i++] = S_COMM;
+ }
+ if (hint[1] & HINT_OBEX) {
+ pr_debug("IrOBEX ");
+ service[i++] = S_OBEX;
+ }
+ }
+ pr_debug("\n");
+
+ /* So that client can be notified about any discovery */
+ service[i++] = S_ANY;
+
+ service[i] = S_END;
+
+ return service;
+}
+#endif
+
+static const __u16 service_hint_mapping[S_END][2] = {
+ { HINT_PNP, 0 }, /* S_PNP */
+ { HINT_PDA, 0 }, /* S_PDA */
+ { HINT_COMPUTER, 0 }, /* S_COMPUTER */
+ { HINT_PRINTER, 0 }, /* S_PRINTER */
+ { HINT_MODEM, 0 }, /* S_MODEM */
+ { HINT_FAX, 0 }, /* S_FAX */
+ { HINT_LAN, 0 }, /* S_LAN */
+ { HINT_EXTENSION, HINT_TELEPHONY }, /* S_TELEPHONY */
+ { HINT_EXTENSION, HINT_COMM }, /* S_COMM */
+ { HINT_EXTENSION, HINT_OBEX }, /* S_OBEX */
+ { 0xFF, 0xFF }, /* S_ANY */
+};
+
+/*
+ * Function irlmp_service_to_hint (service)
+ *
+ * Converts a service type, to a hint bit
+ *
+ * Returns: a 16 bit hint value, with the service bit set
+ */
+__u16 irlmp_service_to_hint(int service)
+{
+ __u16_host_order hint;
+
+ hint.byte[0] = service_hint_mapping[service][0];
+ hint.byte[1] = service_hint_mapping[service][1];
+
+ return hint.word;
+}
+EXPORT_SYMBOL(irlmp_service_to_hint);
+
+/*
+ * Function irlmp_register_service (service)
+ *
+ * Register local service with IrLMP
+ *
+ */
+void *irlmp_register_service(__u16 hints)
+{
+ irlmp_service_t *service;
+
+ pr_debug("%s(), hints = %04x\n", __func__, hints);
+
+ /* Make a new registration */
+ service = kmalloc(sizeof(irlmp_service_t), GFP_ATOMIC);
+ if (!service)
+ return NULL;
+
+ service->hints.word = hints;
+ hashbin_insert(irlmp->services, (irda_queue_t *) service,
+ (long) service, NULL);
+
+ irlmp->hints.word |= hints;
+
+ return (void *)service;
+}
+EXPORT_SYMBOL(irlmp_register_service);
+
+/*
+ * Function irlmp_unregister_service (handle)
+ *
+ * Unregister service with IrLMP.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int irlmp_unregister_service(void *handle)
+{
+ irlmp_service_t *service;
+ unsigned long flags;
+
+ if (!handle)
+ return -1;
+
+ /* Caller may call with invalid handle (it's legal) - Jean II */
+ service = hashbin_lock_find(irlmp->services, (long) handle, NULL);
+ if (!service) {
+ pr_debug("%s(), Unknown service!\n", __func__);
+ return -1;
+ }
+
+ hashbin_remove_this(irlmp->services, (irda_queue_t *) service);
+ kfree(service);
+
+ /* Remove old hint bits */
+ irlmp->hints.word = 0;
+
+ /* Refresh current hint bits */
+ spin_lock_irqsave(&irlmp->services->hb_spinlock, flags);
+ service = (irlmp_service_t *) hashbin_get_first(irlmp->services);
+ while (service) {
+ irlmp->hints.word |= service->hints.word;
+
+ service = (irlmp_service_t *)hashbin_get_next(irlmp->services);
+ }
+ spin_unlock_irqrestore(&irlmp->services->hb_spinlock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(irlmp_unregister_service);
+
+/*
+ * Function irlmp_register_client (hint_mask, callback1, callback2)
+ *
+ * Register a local client with IrLMP
+ * First callback is selective discovery (based on hints)
+ * Second callback is for selective discovery expiries
+ *
+ * Returns: handle > 0 on success, 0 on error
+ */
+void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb,
+ DISCOVERY_CALLBACK2 expir_clb, void *priv)
+{
+ irlmp_client_t *client;
+
+ IRDA_ASSERT(irlmp != NULL, return NULL;);
+
+ /* Make a new registration */
+ client = kmalloc(sizeof(irlmp_client_t), GFP_ATOMIC);
+ if (!client)
+ return NULL;
+
+ /* Register the details */
+ client->hint_mask.word = hint_mask;
+ client->disco_callback = disco_clb;
+ client->expir_callback = expir_clb;
+ client->priv = priv;
+
+ hashbin_insert(irlmp->clients, (irda_queue_t *) client,
+ (long) client, NULL);
+
+ return (void *) client;
+}
+EXPORT_SYMBOL(irlmp_register_client);
+
+/*
+ * Function irlmp_update_client (handle, hint_mask, callback1, callback2)
+ *
+ * Updates specified client (handle) with possibly new hint_mask and
+ * callback
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int irlmp_update_client(void *handle, __u16 hint_mask,
+ DISCOVERY_CALLBACK1 disco_clb,
+ DISCOVERY_CALLBACK2 expir_clb, void *priv)
+{
+ irlmp_client_t *client;
+
+ if (!handle)
+ return -1;
+
+ client = hashbin_lock_find(irlmp->clients, (long) handle, NULL);
+ if (!client) {
+ pr_debug("%s(), Unknown client!\n", __func__);
+ return -1;
+ }
+
+ client->hint_mask.word = hint_mask;
+ client->disco_callback = disco_clb;
+ client->expir_callback = expir_clb;
+ client->priv = priv;
+
+ return 0;
+}
+EXPORT_SYMBOL(irlmp_update_client);
+
+/*
+ * Function irlmp_unregister_client (handle)
+ *
+ * Returns: 0 on success, -1 on error
+ *
+ */
+int irlmp_unregister_client(void *handle)
+{
+ struct irlmp_client *client;
+
+ if (!handle)
+ return -1;
+
+ /* Caller may call with invalid handle (it's legal) - Jean II */
+ client = hashbin_lock_find(irlmp->clients, (long) handle, NULL);
+ if (!client) {
+ pr_debug("%s(), Unknown client!\n", __func__);
+ return -1;
+ }
+
+ pr_debug("%s(), removing client!\n", __func__);
+ hashbin_remove_this(irlmp->clients, (irda_queue_t *) client);
+ kfree(client);
+
+ return 0;
+}
+EXPORT_SYMBOL(irlmp_unregister_client);
+
+/*
+ * Function irlmp_slsap_inuse (slsap)
+ *
+ * Check if the given source LSAP selector is in use
+ *
+ * This function is clearly not very efficient. On the mitigating side, the
+ * stack make sure that in 99% of the cases, we are called only once
+ * for each socket allocation. We could probably keep a bitmap
+ * of the allocated LSAP, but I'm not sure the complexity is worth it.
+ * Jean II
+ */
+static int irlmp_slsap_inuse(__u8 slsap_sel)
+{
+ struct lsap_cb *self;
+ struct lap_cb *lap;
+ unsigned long flags;
+
+ IRDA_ASSERT(irlmp != NULL, return TRUE;);
+ IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return TRUE;);
+ IRDA_ASSERT(slsap_sel != LSAP_ANY, return TRUE;);
+
+#ifdef CONFIG_IRDA_ULTRA
+ /* Accept all bindings to the connectionless LSAP */
+ if (slsap_sel == LSAP_CONNLESS)
+ return FALSE;
+#endif /* CONFIG_IRDA_ULTRA */
+
+ /* Valid values are between 0 and 127 (0x0-0x6F) */
+ if (slsap_sel > LSAP_MAX)
+ return TRUE;
+
+ /*
+ * Check if slsap is already in use. To do this we have to loop over
+ * every IrLAP connection and check every LSAP associated with each
+ * the connection.
+ */
+ spin_lock_irqsave_nested(&irlmp->links->hb_spinlock, flags,
+ SINGLE_DEPTH_NESTING);
+ lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+ while (lap != NULL) {
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, goto errlap;);
+
+ /* Careful for priority inversions here !
+ * irlmp->links is never taken while another IrDA
+ * spinlock is held, so we are safe. Jean II */
+ spin_lock(&lap->lsaps->hb_spinlock);
+
+ /* For this IrLAP, check all the LSAPs */
+ self = (struct lsap_cb *) hashbin_get_first(lap->lsaps);
+ while (self != NULL) {
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC,
+ goto errlsap;);
+
+ if ((self->slsap_sel == slsap_sel)) {
+ pr_debug("Source LSAP selector=%02x in use\n",
+ self->slsap_sel);
+ goto errlsap;
+ }
+ self = (struct lsap_cb*) hashbin_get_next(lap->lsaps);
+ }
+ spin_unlock(&lap->lsaps->hb_spinlock);
+
+ /* Next LAP */
+ lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+ }
+ spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags);
+
+ /*
+ * Server sockets are typically waiting for connections and
+ * therefore reside in the unconnected list. We don't want
+ * to give out their LSAPs for obvious reasons...
+ * Jean II
+ */
+ spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+ self = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps);
+ while (self != NULL) {
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, goto erruncon;);
+ if ((self->slsap_sel == slsap_sel)) {
+ pr_debug("Source LSAP selector=%02x in use (unconnected)\n",
+ self->slsap_sel);
+ goto erruncon;
+ }
+ self = (struct lsap_cb*) hashbin_get_next(irlmp->unconnected_lsaps);
+ }
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+ return FALSE;
+
+ /* Error exit from within one of the two nested loops.
+ * Make sure we release the right spinlock in the righ order.
+ * Jean II */
+errlsap:
+ spin_unlock(&lap->lsaps->hb_spinlock);
+IRDA_ASSERT_LABEL(errlap:)
+ spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags);
+ return TRUE;
+
+ /* Error exit from within the unconnected loop.
+ * Just one spinlock to release... Jean II */
+erruncon:
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+ return TRUE;
+}
+
+/*
+ * Function irlmp_find_free_slsap ()
+ *
+ * Find a free source LSAP to use. This function is called if the service
+ * user has requested a source LSAP equal to LM_ANY
+ */
+static __u8 irlmp_find_free_slsap(void)
+{
+ __u8 lsap_sel;
+ int wrapped = 0;
+
+ IRDA_ASSERT(irlmp != NULL, return -1;);
+ IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return -1;);
+
+ /* Most users don't really care which LSAPs they are given,
+ * and therefore we automatically give them a free LSAP.
+ * This function try to find a suitable LSAP, i.e. which is
+ * not in use and is within the acceptable range. Jean II */
+
+ do {
+ /* Always increment to LSAP number before using it.
+ * In theory, we could reuse the last LSAP number, as long
+ * as it is no longer in use. Some IrDA stack do that.
+ * However, the previous socket may be half closed, i.e.
+ * we closed it, we think it's no longer in use, but the
+ * other side did not receive our close and think it's
+ * active and still send data on it.
+ * This is similar to what is done with PIDs and TCP ports.
+ * Also, this reduce the number of calls to irlmp_slsap_inuse()
+ * which is an expensive function to call.
+ * Jean II */
+ irlmp->last_lsap_sel++;
+
+ /* Check if we need to wraparound (0x70-0x7f are reserved) */
+ if (irlmp->last_lsap_sel > LSAP_MAX) {
+ /* 0x00-0x10 are also reserved for well know ports */
+ irlmp->last_lsap_sel = 0x10;
+
+ /* Make sure we terminate the loop */
+ if (wrapped++) {
+ net_err_ratelimited("%s: no more free LSAPs !\n",
+ __func__);
+ return 0;
+ }
+ }
+
+ /* If the LSAP is in use, try the next one.
+ * Despite the autoincrement, we need to check if the lsap
+ * is really in use or not, first because LSAP may be
+ * directly allocated in irlmp_open_lsap(), and also because
+ * we may wraparound on old sockets. Jean II */
+ } while (irlmp_slsap_inuse(irlmp->last_lsap_sel));
+
+ /* Got it ! */
+ lsap_sel = irlmp->last_lsap_sel;
+ pr_debug("%s(), found free lsap_sel=%02x\n",
+ __func__, lsap_sel);
+
+ return lsap_sel;
+}
+
+/*
+ * Function irlmp_convert_lap_reason (lap_reason)
+ *
+ * Converts IrLAP disconnect reason codes to IrLMP disconnect reason
+ * codes
+ *
+ */
+LM_REASON irlmp_convert_lap_reason( LAP_REASON lap_reason)
+{
+ int reason = LM_LAP_DISCONNECT;
+
+ switch (lap_reason) {
+ case LAP_DISC_INDICATION: /* Received a disconnect request from peer */
+ pr_debug("%s(), LAP_DISC_INDICATION\n", __func__);
+ reason = LM_USER_REQUEST;
+ break;
+ case LAP_NO_RESPONSE: /* To many retransmits without response */
+ pr_debug("%s(), LAP_NO_RESPONSE\n", __func__);
+ reason = LM_LAP_DISCONNECT;
+ break;
+ case LAP_RESET_INDICATION:
+ pr_debug("%s(), LAP_RESET_INDICATION\n", __func__);
+ reason = LM_LAP_RESET;
+ break;
+ case LAP_FOUND_NONE:
+ case LAP_MEDIA_BUSY:
+ case LAP_PRIMARY_CONFLICT:
+ pr_debug("%s(), LAP_FOUND_NONE, LAP_MEDIA_BUSY or LAP_PRIMARY_CONFLICT\n",
+ __func__);
+ reason = LM_CONNECT_FAILURE;
+ break;
+ default:
+ pr_debug("%s(), Unknown IrLAP disconnect reason %d!\n",
+ __func__, lap_reason);
+ reason = LM_LAP_DISCONNECT;
+ break;
+ }
+
+ return reason;
+}
+
+#ifdef CONFIG_PROC_FS
+
+struct irlmp_iter_state {
+ hashbin_t *hashbin;
+};
+
+#define LSAP_START_TOKEN ((void *)1)
+#define LINK_START_TOKEN ((void *)2)
+
+static void *irlmp_seq_hb_idx(struct irlmp_iter_state *iter, loff_t *off)
+{
+ void *element;
+
+ spin_lock_irq(&iter->hashbin->hb_spinlock);
+ for (element = hashbin_get_first(iter->hashbin);
+ element != NULL;
+ element = hashbin_get_next(iter->hashbin)) {
+ if (!off || *off-- == 0) {
+ /* NB: hashbin left locked */
+ return element;
+ }
+ }
+ spin_unlock_irq(&iter->hashbin->hb_spinlock);
+ iter->hashbin = NULL;
+ return NULL;
+}
+
+
+static void *irlmp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct irlmp_iter_state *iter = seq->private;
+ void *v;
+ loff_t off = *pos;
+
+ iter->hashbin = NULL;
+ if (off-- == 0)
+ return LSAP_START_TOKEN;
+
+ iter->hashbin = irlmp->unconnected_lsaps;
+ v = irlmp_seq_hb_idx(iter, &off);
+ if (v)
+ return v;
+
+ if (off-- == 0)
+ return LINK_START_TOKEN;
+
+ iter->hashbin = irlmp->links;
+ return irlmp_seq_hb_idx(iter, &off);
+}
+
+static void *irlmp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct irlmp_iter_state *iter = seq->private;
+
+ ++*pos;
+
+ if (v == LSAP_START_TOKEN) { /* start of list of lsaps */
+ iter->hashbin = irlmp->unconnected_lsaps;
+ v = irlmp_seq_hb_idx(iter, NULL);
+ return v ? v : LINK_START_TOKEN;
+ }
+
+ if (v == LINK_START_TOKEN) { /* start of list of links */
+ iter->hashbin = irlmp->links;
+ return irlmp_seq_hb_idx(iter, NULL);
+ }
+
+ v = hashbin_get_next(iter->hashbin);
+
+ if (v == NULL) { /* no more in this hash bin */
+ spin_unlock_irq(&iter->hashbin->hb_spinlock);
+
+ if (iter->hashbin == irlmp->unconnected_lsaps)
+ v = LINK_START_TOKEN;
+
+ iter->hashbin = NULL;
+ }
+ return v;
+}
+
+static void irlmp_seq_stop(struct seq_file *seq, void *v)
+{
+ struct irlmp_iter_state *iter = seq->private;
+
+ if (iter->hashbin)
+ spin_unlock_irq(&iter->hashbin->hb_spinlock);
+}
+
+static int irlmp_seq_show(struct seq_file *seq, void *v)
+{
+ const struct irlmp_iter_state *iter = seq->private;
+ struct lsap_cb *self = v;
+
+ if (v == LSAP_START_TOKEN)
+ seq_puts(seq, "Unconnected LSAPs:\n");
+ else if (v == LINK_START_TOKEN)
+ seq_puts(seq, "\nRegistered Link Layers:\n");
+ else if (iter->hashbin == irlmp->unconnected_lsaps) {
+ self = v;
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EINVAL; );
+ seq_printf(seq, "lsap state: %s, ",
+ irlsap_state[ self->lsap_state]);
+ seq_printf(seq,
+ "slsap_sel: %#02x, dlsap_sel: %#02x, ",
+ self->slsap_sel, self->dlsap_sel);
+ seq_printf(seq, "(%s)", self->notify.name);
+ seq_printf(seq, "\n");
+ } else if (iter->hashbin == irlmp->links) {
+ struct lap_cb *lap = v;
+
+ seq_printf(seq, "lap state: %s, ",
+ irlmp_state[lap->lap_state]);
+
+ seq_printf(seq, "saddr: %#08x, daddr: %#08x, ",
+ lap->saddr, lap->daddr);
+ seq_printf(seq, "num lsaps: %d",
+ HASHBIN_GET_SIZE(lap->lsaps));
+ seq_printf(seq, "\n");
+
+ /* Careful for priority inversions here !
+ * All other uses of attrib spinlock are independent of
+ * the object spinlock, so we are safe. Jean II */
+ spin_lock(&lap->lsaps->hb_spinlock);
+
+ seq_printf(seq, "\n Connected LSAPs:\n");
+ for (self = (struct lsap_cb *) hashbin_get_first(lap->lsaps);
+ self != NULL;
+ self = (struct lsap_cb *)hashbin_get_next(lap->lsaps)) {
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC,
+ goto outloop;);
+ seq_printf(seq, " lsap state: %s, ",
+ irlsap_state[ self->lsap_state]);
+ seq_printf(seq,
+ "slsap_sel: %#02x, dlsap_sel: %#02x, ",
+ self->slsap_sel, self->dlsap_sel);
+ seq_printf(seq, "(%s)", self->notify.name);
+ seq_putc(seq, '\n');
+
+ }
+ IRDA_ASSERT_LABEL(outloop:)
+ spin_unlock(&lap->lsaps->hb_spinlock);
+ seq_putc(seq, '\n');
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct seq_operations irlmp_seq_ops = {
+ .start = irlmp_seq_start,
+ .next = irlmp_seq_next,
+ .stop = irlmp_seq_stop,
+ .show = irlmp_seq_show,
+};
+
+static int irlmp_seq_open(struct inode *inode, struct file *file)
+{
+ IRDA_ASSERT(irlmp != NULL, return -EINVAL;);
+
+ return seq_open_private(file, &irlmp_seq_ops,
+ sizeof(struct irlmp_iter_state));
+}
+
+const struct file_operations irlmp_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = irlmp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_private,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/irlmp_event.c b/net/irda/irlmp_event.c
new file mode 100644
index 000000000..e306cf2c1
--- /dev/null
+++ b/net/irda/irlmp_event.c
@@ -0,0 +1,886 @@
+/*********************************************************************
+ *
+ * Filename: irlmp_event.c
+ * Version: 0.8
+ * Description: An IrDA LMP event driver for Linux
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Aug 4 20:40:53 1997
+ * Modified at: Tue Dec 14 23:04:16 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/kernel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/irlmp_event.h>
+
+const char *const irlmp_state[] = {
+ "LAP_STANDBY",
+ "LAP_U_CONNECT",
+ "LAP_ACTIVE",
+};
+
+const char *const irlsap_state[] = {
+ "LSAP_DISCONNECTED",
+ "LSAP_CONNECT",
+ "LSAP_CONNECT_PEND",
+ "LSAP_DATA_TRANSFER_READY",
+ "LSAP_SETUP",
+ "LSAP_SETUP_PEND",
+};
+
+static const char *const irlmp_event[] __maybe_unused = {
+ "LM_CONNECT_REQUEST",
+ "LM_CONNECT_CONFIRM",
+ "LM_CONNECT_RESPONSE",
+ "LM_CONNECT_INDICATION",
+
+ "LM_DISCONNECT_INDICATION",
+ "LM_DISCONNECT_REQUEST",
+
+ "LM_DATA_REQUEST",
+ "LM_UDATA_REQUEST",
+ "LM_DATA_INDICATION",
+ "LM_UDATA_INDICATION",
+
+ "LM_WATCHDOG_TIMEOUT",
+
+ /* IrLAP events */
+ "LM_LAP_CONNECT_REQUEST",
+ "LM_LAP_CONNECT_INDICATION",
+ "LM_LAP_CONNECT_CONFIRM",
+ "LM_LAP_DISCONNECT_INDICATION",
+ "LM_LAP_DISCONNECT_REQUEST",
+ "LM_LAP_DISCOVERY_REQUEST",
+ "LM_LAP_DISCOVERY_CONFIRM",
+ "LM_LAP_IDLE_TIMEOUT",
+};
+
+/* LAP Connection control proto declarations */
+static void irlmp_state_standby (struct lap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static void irlmp_state_u_connect(struct lap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static void irlmp_state_active (struct lap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+
+/* LSAP Connection control proto declarations */
+static int irlmp_state_disconnected(struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static int irlmp_state_connect (struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static int irlmp_state_connect_pend(struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static int irlmp_state_dtr (struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static int irlmp_state_setup (struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+static int irlmp_state_setup_pend (struct lsap_cb *, IRLMP_EVENT,
+ struct sk_buff *);
+
+static void (*lap_state[]) (struct lap_cb *, IRLMP_EVENT, struct sk_buff *) =
+{
+ irlmp_state_standby,
+ irlmp_state_u_connect,
+ irlmp_state_active,
+};
+
+static int (*lsap_state[])( struct lsap_cb *, IRLMP_EVENT, struct sk_buff *) =
+{
+ irlmp_state_disconnected,
+ irlmp_state_connect,
+ irlmp_state_connect_pend,
+ irlmp_state_dtr,
+ irlmp_state_setup,
+ irlmp_state_setup_pend
+};
+
+static inline void irlmp_next_lap_state(struct lap_cb *self,
+ IRLMP_STATE state)
+{
+ /*
+ pr_debug("%s(), LMP LAP = %s\n", __func__, irlmp_state[state]);
+ */
+ self->lap_state = state;
+}
+
+static inline void irlmp_next_lsap_state(struct lsap_cb *self,
+ LSAP_STATE state)
+{
+ /*
+ IRDA_ASSERT(self != NULL, return;);
+ pr_debug("%s(), LMP LSAP = %s\n", __func__, irlsap_state[state]);
+ */
+ self->lsap_state = state;
+}
+
+/* Do connection control events */
+int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ pr_debug("%s(), EVENT = %s, STATE = %s\n",
+ __func__, irlmp_event[event], irlsap_state[self->lsap_state]);
+
+ return (*lsap_state[self->lsap_state]) (self, event, skb);
+}
+
+/*
+ * Function do_lap_event (event, skb, info)
+ *
+ * Do IrLAP control events
+ *
+ */
+void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+ pr_debug("%s(), EVENT = %s, STATE = %s\n", __func__,
+ irlmp_event[event],
+ irlmp_state[self->lap_state]);
+
+ (*lap_state[self->lap_state]) (self, event, skb);
+}
+
+void irlmp_discovery_timer_expired(void *data)
+{
+ /* We always cleanup the log (active & passive discovery) */
+ irlmp_do_expiry();
+
+ irlmp_do_discovery(sysctl_discovery_slots);
+
+ /* Restart timer */
+ irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout * HZ);
+}
+
+void irlmp_watchdog_timer_expired(void *data)
+{
+ struct lsap_cb *self = (struct lsap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+ irlmp_do_lsap_event(self, LM_WATCHDOG_TIMEOUT, NULL);
+}
+
+void irlmp_idle_timer_expired(void *data)
+{
+ struct lap_cb *self = (struct lap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+ irlmp_do_lap_event(self, LM_LAP_IDLE_TIMEOUT, NULL);
+}
+
+/*
+ * Send an event on all LSAPs attached to this LAP.
+ */
+static inline void
+irlmp_do_all_lsap_event(hashbin_t * lsap_hashbin,
+ IRLMP_EVENT event)
+{
+ struct lsap_cb *lsap;
+ struct lsap_cb *lsap_next;
+
+ /* Note : this function use the new hashbin_find_next()
+ * function, instead of the old hashbin_get_next().
+ * This make sure that we are always pointing one lsap
+ * ahead, so that if the current lsap is removed as the
+ * result of sending the event, we don't care.
+ * Also, as we store the context ourselves, if an enumeration
+ * of the same lsap hashbin happens as the result of sending the
+ * event, we don't care.
+ * The only problem is if the next lsap is removed. In that case,
+ * hashbin_find_next() will return NULL and we will abort the
+ * enumeration. - Jean II */
+
+ /* Also : we don't accept any skb in input. We can *NOT* pass
+ * the same skb to multiple clients safely, we would need to
+ * skb_clone() it. - Jean II */
+
+ lsap = (struct lsap_cb *) hashbin_get_first(lsap_hashbin);
+
+ while (NULL != hashbin_find_next(lsap_hashbin,
+ (long) lsap,
+ NULL,
+ (void *) &lsap_next) ) {
+ irlmp_do_lsap_event(lsap, event, NULL);
+ lsap = lsap_next;
+ }
+}
+
+/*********************************************************************
+ *
+ * LAP connection control states
+ *
+ ********************************************************************/
+
+/*
+ * Function irlmp_state_standby (event, skb, info)
+ *
+ * STANDBY, The IrLAP connection does not exist.
+ *
+ */
+static void irlmp_state_standby(struct lap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self->irlap != NULL, return;);
+
+ switch (event) {
+ case LM_LAP_DISCOVERY_REQUEST:
+ /* irlmp_next_station_state( LMP_DISCOVER); */
+
+ irlap_discovery_request(self->irlap, &irlmp->discovery_cmd);
+ break;
+ case LM_LAP_CONNECT_INDICATION:
+ /* It's important to switch state first, to avoid IrLMP to
+ * think that the link is free since IrLMP may then start
+ * discovery before the connection is properly set up. DB.
+ */
+ irlmp_next_lap_state(self, LAP_ACTIVE);
+
+ /* Just accept connection TODO, this should be fixed */
+ irlap_connect_response(self->irlap, skb);
+ break;
+ case LM_LAP_CONNECT_REQUEST:
+ pr_debug("%s() LS_CONNECT_REQUEST\n", __func__);
+
+ irlmp_next_lap_state(self, LAP_U_CONNECT);
+
+ /* FIXME: need to set users requested QoS */
+ irlap_connect_request(self->irlap, self->daddr, NULL, 0);
+ break;
+ case LM_LAP_DISCONNECT_INDICATION:
+ pr_debug("%s(), Error LM_LAP_DISCONNECT_INDICATION\n",
+ __func__);
+
+ irlmp_next_lap_state(self, LAP_STANDBY);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlmp_event[event]);
+ break;
+ }
+}
+
+/*
+ * Function irlmp_state_u_connect (event, skb, info)
+ *
+ * U_CONNECT, The layer above has tried to open an LSAP connection but
+ * since the IrLAP connection does not exist, we must first start an
+ * IrLAP connection. We are now waiting response from IrLAP.
+ * */
+static void irlmp_state_u_connect(struct lap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ pr_debug("%s(), event=%s\n", __func__, irlmp_event[event]);
+
+ switch (event) {
+ case LM_LAP_CONNECT_INDICATION:
+ /* It's important to switch state first, to avoid IrLMP to
+ * think that the link is free since IrLMP may then start
+ * discovery before the connection is properly set up. DB.
+ */
+ irlmp_next_lap_state(self, LAP_ACTIVE);
+
+ /* Just accept connection TODO, this should be fixed */
+ irlap_connect_response(self->irlap, skb);
+
+ /* Tell LSAPs that they can start sending data */
+ irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+ /* Note : by the time we get there (LAP retries and co),
+ * the lsaps may already have gone. This avoid getting stuck
+ * forever in LAP_ACTIVE state - Jean II */
+ if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+ pr_debug("%s() NO LSAPs !\n", __func__);
+ irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT);
+ }
+ break;
+ case LM_LAP_CONNECT_REQUEST:
+ /* Already trying to connect */
+ break;
+ case LM_LAP_CONNECT_CONFIRM:
+ /* For all lsap_ce E Associated do LS_Connect_confirm */
+ irlmp_next_lap_state(self, LAP_ACTIVE);
+
+ /* Tell LSAPs that they can start sending data */
+ irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+ /* Note : by the time we get there (LAP retries and co),
+ * the lsaps may already have gone. This avoid getting stuck
+ * forever in LAP_ACTIVE state - Jean II */
+ if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+ pr_debug("%s() NO LSAPs !\n", __func__);
+ irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT);
+ }
+ break;
+ case LM_LAP_DISCONNECT_INDICATION:
+ pr_debug("%s(), LM_LAP_DISCONNECT_INDICATION\n", __func__);
+ irlmp_next_lap_state(self, LAP_STANDBY);
+
+ /* Send disconnect event to all LSAPs using this link */
+ irlmp_do_all_lsap_event(self->lsaps,
+ LM_LAP_DISCONNECT_INDICATION);
+ break;
+ case LM_LAP_DISCONNECT_REQUEST:
+ pr_debug("%s(), LM_LAP_DISCONNECT_REQUEST\n", __func__);
+
+ /* One of the LSAP did timeout or was closed, if it was
+ * the last one, try to get out of here - Jean II */
+ if (HASHBIN_GET_SIZE(self->lsaps) <= 1) {
+ irlap_disconnect_request(self->irlap);
+ }
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlmp_event[event]);
+ break;
+ }
+}
+
+/*
+ * Function irlmp_state_active (event, skb, info)
+ *
+ * ACTIVE, IrLAP connection is active
+ *
+ */
+static void irlmp_state_active(struct lap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ switch (event) {
+ case LM_LAP_CONNECT_REQUEST:
+ pr_debug("%s(), LS_CONNECT_REQUEST\n", __func__);
+
+ /*
+ * IrLAP may have a pending disconnect. We tried to close
+ * IrLAP, but it was postponed because the link was
+ * busy or we were still sending packets. As we now
+ * need it, make sure it stays on. Jean II
+ */
+ irlap_clear_disconnect(self->irlap);
+
+ /*
+ * LAP connection already active, just bounce back! Since we
+ * don't know which LSAP that tried to do this, we have to
+ * notify all LSAPs using this LAP, but that should be safe to
+ * do anyway.
+ */
+ irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+ /* Needed by connect indication */
+ irlmp_do_all_lsap_event(irlmp->unconnected_lsaps,
+ LM_LAP_CONNECT_CONFIRM);
+ /* Keep state */
+ break;
+ case LM_LAP_DISCONNECT_REQUEST:
+ /*
+ * Need to find out if we should close IrLAP or not. If there
+ * is only one LSAP connection left on this link, that LSAP
+ * must be the one that tries to close IrLAP. It will be
+ * removed later and moved to the list of unconnected LSAPs
+ */
+ if (HASHBIN_GET_SIZE(self->lsaps) > 0) {
+ /* Timer value is checked in irsysctl - Jean II */
+ irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000);
+ } else {
+ /* No more connections, so close IrLAP */
+
+ /* We don't want to change state just yet, because
+ * we want to reflect accurately the real state of
+ * the LAP, not the state we wish it was in,
+ * so that we don't lose LM_LAP_CONNECT_REQUEST.
+ * In some cases, IrLAP won't close the LAP
+ * immediately. For example, it might still be
+ * retrying packets or waiting for the pf bit.
+ * As the LAP always send a DISCONNECT_INDICATION
+ * in PCLOSE or SCLOSE, just change state on that.
+ * Jean II */
+ irlap_disconnect_request(self->irlap);
+ }
+ break;
+ case LM_LAP_IDLE_TIMEOUT:
+ if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+ /* Same reasoning as above - keep state */
+ irlap_disconnect_request(self->irlap);
+ }
+ break;
+ case LM_LAP_DISCONNECT_INDICATION:
+ irlmp_next_lap_state(self, LAP_STANDBY);
+
+ /* In some case, at this point our side has already closed
+ * all lsaps, and we are waiting for the idle_timer to
+ * expire. If another device reconnect immediately, the
+ * idle timer will expire in the midle of the connection
+ * initialisation, screwing up things a lot...
+ * Therefore, we must stop the timer... */
+ irlmp_stop_idle_timer(self);
+
+ /*
+ * Inform all connected LSAP's using this link
+ */
+ irlmp_do_all_lsap_event(self->lsaps,
+ LM_LAP_DISCONNECT_INDICATION);
+
+ /* Force an expiry of the discovery log.
+ * Now that the LAP is free, the system may attempt to
+ * connect to another device. Unfortunately, our entries
+ * are stale. There is a small window (<3s) before the
+ * normal discovery will run and where irlmp_connect_request()
+ * can get the wrong info, so make sure things get
+ * cleaned *NOW* ;-) - Jean II */
+ irlmp_do_expiry();
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s\n",
+ __func__, irlmp_event[event]);
+ break;
+ }
+}
+
+/*********************************************************************
+ *
+ * LSAP connection control states
+ *
+ ********************************************************************/
+
+/*
+ * Function irlmp_state_disconnected (event, skb, info)
+ *
+ * DISCONNECTED
+ *
+ */
+static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ switch (event) {
+#ifdef CONFIG_IRDA_ULTRA
+ case LM_UDATA_INDICATION:
+ /* This is most bizarre. Those packets are aka unreliable
+ * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA.
+ * Why do we pass them as Ultra ??? Jean II */
+ irlmp_connless_data_indication(self, skb);
+ break;
+#endif /* CONFIG_IRDA_ULTRA */
+ case LM_CONNECT_REQUEST:
+ pr_debug("%s(), LM_CONNECT_REQUEST\n", __func__);
+
+ if (self->conn_skb) {
+ net_warn_ratelimited("%s: busy with another request!\n",
+ __func__);
+ return -EBUSY;
+ }
+ /* Don't forget to refcount it (see irlmp_connect_request()) */
+ skb_get(skb);
+ self->conn_skb = skb;
+
+ irlmp_next_lsap_state(self, LSAP_SETUP_PEND);
+
+ /* Start watchdog timer (5 secs for now) */
+ irlmp_start_watchdog_timer(self, 5*HZ);
+
+ irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL);
+ break;
+ case LM_CONNECT_INDICATION:
+ if (self->conn_skb) {
+ net_warn_ratelimited("%s: busy with another request!\n",
+ __func__);
+ return -EBUSY;
+ }
+ /* Don't forget to refcount it (see irlap_driver_rcv()) */
+ skb_get(skb);
+ self->conn_skb = skb;
+
+ irlmp_next_lsap_state(self, LSAP_CONNECT_PEND);
+
+ /* Start watchdog timer
+ * This is not mentionned in the spec, but there is a rare
+ * race condition that can get the socket stuck.
+ * If we receive this event while our LAP is closing down,
+ * the LM_LAP_CONNECT_REQUEST get lost and we get stuck in
+ * CONNECT_PEND state forever.
+ * The other cause of getting stuck down there is if the
+ * higher layer never reply to the CONNECT_INDICATION.
+ * Anyway, it make sense to make sure that we always have
+ * a backup plan. 1 second is plenty (should be immediate).
+ * Jean II */
+ irlmp_start_watchdog_timer(self, 1*HZ);
+
+ irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlmp_state_connect (self, event, skb)
+ *
+ * CONNECT
+ *
+ */
+static int irlmp_state_connect(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ struct lsap_cb *lsap;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ switch (event) {
+ case LM_CONNECT_RESPONSE:
+ /*
+ * Bind this LSAP to the IrLAP link where the connect was
+ * received
+ */
+ lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self,
+ NULL);
+
+ IRDA_ASSERT(lsap == self, return -1;);
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ IRDA_ASSERT(self->lap->lsaps != NULL, return -1;);
+
+ hashbin_insert(self->lap->lsaps, (irda_queue_t *) self,
+ (long) self, NULL);
+
+ set_bit(0, &self->connected); /* TRUE */
+
+ irlmp_send_lcf_pdu(self->lap, self->dlsap_sel,
+ self->slsap_sel, CONNECT_CNF, skb);
+
+ del_timer(&self->watchdog_timer);
+
+ irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY);
+ break;
+ case LM_WATCHDOG_TIMEOUT:
+ /* May happen, who knows...
+ * Jean II */
+ pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__);
+
+ /* Disconnect, get out... - Jean II */
+ self->lap = NULL;
+ self->dlsap_sel = LSAP_ANY;
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+ break;
+ default:
+ /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we
+ * are *not* yet bound to the IrLAP link. Jean II */
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlmp_state_connect_pend (event, skb, info)
+ *
+ * CONNECT_PEND
+ *
+ */
+static int irlmp_state_connect_pend(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ switch (event) {
+ case LM_CONNECT_REQUEST:
+ /* Keep state */
+ break;
+ case LM_CONNECT_RESPONSE:
+ pr_debug("%s(), LM_CONNECT_RESPONSE, no indication issued yet\n",
+ __func__);
+ /* Keep state */
+ break;
+ case LM_DISCONNECT_REQUEST:
+ pr_debug("%s(), LM_DISCONNECT_REQUEST, not yet bound to IrLAP connection\n",
+ __func__);
+ /* Keep state */
+ break;
+ case LM_LAP_CONNECT_CONFIRM:
+ pr_debug("%s(), LS_CONNECT_CONFIRM\n", __func__);
+ irlmp_next_lsap_state(self, LSAP_CONNECT);
+
+ tx_skb = self->conn_skb;
+ self->conn_skb = NULL;
+
+ irlmp_connect_indication(self, tx_skb);
+ /* Drop reference count - see irlmp_connect_indication(). */
+ dev_kfree_skb(tx_skb);
+ break;
+ case LM_WATCHDOG_TIMEOUT:
+ /* Will happen in some rare cases because of a race condition.
+ * Just make sure we don't stay there forever...
+ * Jean II */
+ pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__);
+
+ /* Go back to disconnected mode, keep the socket waiting */
+ self->lap = NULL;
+ self->dlsap_sel = LSAP_ANY;
+ if(self->conn_skb)
+ dev_kfree_skb(self->conn_skb);
+ self->conn_skb = NULL;
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+ break;
+ default:
+ /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we
+ * are *not* yet bound to the IrLAP link. Jean II */
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlmp_state_dtr (self, event, skb)
+ *
+ * DATA_TRANSFER_READY
+ *
+ */
+static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ LM_REASON reason;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+
+ switch (event) {
+ case LM_DATA_REQUEST: /* Optimize for the common case */
+ irlmp_send_data_pdu(self->lap, self->dlsap_sel,
+ self->slsap_sel, FALSE, skb);
+ break;
+ case LM_DATA_INDICATION: /* Optimize for the common case */
+ irlmp_data_indication(self, skb);
+ break;
+ case LM_UDATA_REQUEST:
+ IRDA_ASSERT(skb != NULL, return -1;);
+ irlmp_send_data_pdu(self->lap, self->dlsap_sel,
+ self->slsap_sel, TRUE, skb);
+ break;
+ case LM_UDATA_INDICATION:
+ irlmp_udata_indication(self, skb);
+ break;
+ case LM_CONNECT_REQUEST:
+ pr_debug("%s(), LM_CONNECT_REQUEST, error, LSAP already connected\n",
+ __func__);
+ /* Keep state */
+ break;
+ case LM_CONNECT_RESPONSE:
+ pr_debug("%s(), LM_CONNECT_RESPONSE, error, LSAP already connected\n",
+ __func__);
+ /* Keep state */
+ break;
+ case LM_DISCONNECT_REQUEST:
+ irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, self->slsap_sel,
+ DISCONNECT, skb);
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+ /* Called only from irlmp_disconnect_request(), will
+ * unbind from LAP over there. Jean II */
+
+ /* Try to close the LAP connection if its still there */
+ if (self->lap) {
+ pr_debug("%s(), trying to close IrLAP\n",
+ __func__);
+ irlmp_do_lap_event(self->lap,
+ LM_LAP_DISCONNECT_REQUEST,
+ NULL);
+ }
+ break;
+ case LM_LAP_DISCONNECT_INDICATION:
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ reason = irlmp_convert_lap_reason(self->lap->reason);
+
+ irlmp_disconnect_indication(self, reason, NULL);
+ break;
+ case LM_DISCONNECT_INDICATION:
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+ IRDA_ASSERT(skb != NULL, return -1;);
+ IRDA_ASSERT(skb->len > 3, return -1;);
+ reason = skb->data[3];
+
+ /* Try to close the LAP connection */
+ pr_debug("%s(), trying to close IrLAP\n", __func__);
+ irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+
+ irlmp_disconnect_indication(self, reason, skb);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlmp_state_setup (event, skb, info)
+ *
+ * SETUP, Station Control has set up the underlying IrLAP connection.
+ * An LSAP connection request has been transmitted to the peer
+ * LSAP-Connection Control FSM and we are awaiting reply.
+ */
+static int irlmp_state_setup(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ LM_REASON reason;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+ switch (event) {
+ case LM_CONNECT_CONFIRM:
+ irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY);
+
+ del_timer(&self->watchdog_timer);
+
+ irlmp_connect_confirm(self, skb);
+ break;
+ case LM_DISCONNECT_INDICATION:
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+ IRDA_ASSERT(skb != NULL, return -1;);
+ IRDA_ASSERT(skb->len > 3, return -1;);
+ reason = skb->data[3];
+
+ /* Try to close the LAP connection */
+ pr_debug("%s(), trying to close IrLAP\n", __func__);
+ irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+
+ irlmp_disconnect_indication(self, reason, skb);
+ break;
+ case LM_LAP_DISCONNECT_INDICATION:
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ del_timer(&self->watchdog_timer);
+
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+ reason = irlmp_convert_lap_reason(self->lap->reason);
+
+ irlmp_disconnect_indication(self, reason, skb);
+ break;
+ case LM_WATCHDOG_TIMEOUT:
+ pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__);
+
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Function irlmp_state_setup_pend (event, skb, info)
+ *
+ * SETUP_PEND, An LM_CONNECT_REQUEST has been received from the service
+ * user to set up an LSAP connection. A request has been sent to the
+ * LAP FSM to set up the underlying IrLAP connection, and we
+ * are awaiting confirm.
+ */
+static int irlmp_state_setup_pend(struct lsap_cb *self, IRLMP_EVENT event,
+ struct sk_buff *skb)
+{
+ struct sk_buff *tx_skb;
+ LM_REASON reason;
+ int ret = 0;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(irlmp != NULL, return -1;);
+
+ switch (event) {
+ case LM_LAP_CONNECT_CONFIRM:
+ IRDA_ASSERT(self->conn_skb != NULL, return -1;);
+
+ tx_skb = self->conn_skb;
+ self->conn_skb = NULL;
+
+ irlmp_send_lcf_pdu(self->lap, self->dlsap_sel,
+ self->slsap_sel, CONNECT_CMD, tx_skb);
+ /* Drop reference count - see irlap_data_request(). */
+ dev_kfree_skb(tx_skb);
+
+ irlmp_next_lsap_state(self, LSAP_SETUP);
+ break;
+ case LM_WATCHDOG_TIMEOUT:
+ pr_debug("%s() : WATCHDOG_TIMEOUT !\n", __func__);
+
+ IRDA_ASSERT(self->lap != NULL, return -1;);
+ irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL);
+ break;
+ case LM_LAP_DISCONNECT_INDICATION: /* LS_Disconnect.indication */
+ del_timer( &self->watchdog_timer);
+
+ irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+ reason = irlmp_convert_lap_reason(self->lap->reason);
+
+ irlmp_disconnect_indication(self, reason, NULL);
+ break;
+ default:
+ pr_debug("%s(), Unknown event %s on LSAP %#02x\n",
+ __func__, irlmp_event[event], self->slsap_sel);
+ break;
+ }
+ return ret;
+}
diff --git a/net/irda/irlmp_frame.c b/net/irda/irlmp_frame.c
new file mode 100644
index 000000000..38b0f994b
--- /dev/null
+++ b/net/irda/irlmp_frame.c
@@ -0,0 +1,476 @@
+/*********************************************************************
+ *
+ * Filename: irlmp_frame.c
+ * Version: 0.9
+ * Description: IrLMP frame implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Aug 19 02:09:59 1997
+ * Modified at: Mon Dec 13 13:41:12 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/kernel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/discovery.h>
+
+static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap,
+ __u8 slsap, int status, hashbin_t *);
+
+inline void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+ int expedited, struct sk_buff *skb)
+{
+ skb->data[0] = dlsap;
+ skb->data[1] = slsap;
+
+ if (expedited) {
+ pr_debug("%s(), sending expedited data\n", __func__);
+ irlap_data_request(self->irlap, skb, TRUE);
+ } else
+ irlap_data_request(self->irlap, skb, FALSE);
+}
+
+/*
+ * Function irlmp_send_lcf_pdu (dlsap, slsap, opcode,skb)
+ *
+ * Send Link Control Frame to IrLAP
+ */
+void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+ __u8 opcode, struct sk_buff *skb)
+{
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ frame = skb->data;
+
+ frame[0] = dlsap | CONTROL_BIT;
+ frame[1] = slsap;
+
+ frame[2] = opcode;
+
+ if (opcode == DISCONNECT)
+ frame[3] = 0x01; /* Service user request */
+ else
+ frame[3] = 0x00; /* rsvd */
+
+ irlap_data_request(self->irlap, skb, FALSE);
+}
+
+/*
+ * Function irlmp_input (skb)
+ *
+ * Used by IrLAP to pass received data frames to IrLMP layer
+ *
+ */
+void irlmp_link_data_indication(struct lap_cb *self, struct sk_buff *skb,
+ int unreliable)
+{
+ struct lsap_cb *lsap;
+ __u8 slsap_sel; /* Source (this) LSAP address */
+ __u8 dlsap_sel; /* Destination LSAP address */
+ __u8 *fp;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+ IRDA_ASSERT(skb->len > 2, return;);
+
+ fp = skb->data;
+
+ /*
+ * The next statements may be confusing, but we do this so that
+ * destination LSAP of received frame is source LSAP in our view
+ */
+ slsap_sel = fp[0] & LSAP_MASK;
+ dlsap_sel = fp[1];
+
+ /*
+ * Check if this is an incoming connection, since we must deal with
+ * it in a different way than other established connections.
+ */
+ if ((fp[0] & CONTROL_BIT) && (fp[2] == CONNECT_CMD)) {
+ pr_debug("%s(), incoming connection, source LSAP=%d, dest LSAP=%d\n",
+ __func__, slsap_sel, dlsap_sel);
+
+ /* Try to find LSAP among the unconnected LSAPs */
+ lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, CONNECT_CMD,
+ irlmp->unconnected_lsaps);
+
+ /* Maybe LSAP was already connected, so try one more time */
+ if (!lsap) {
+ pr_debug("%s(), incoming connection for LSAP already connected\n",
+ __func__);
+ lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0,
+ self->lsaps);
+ }
+ } else
+ lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0,
+ self->lsaps);
+
+ if (lsap == NULL) {
+ pr_debug("IrLMP, Sorry, no LSAP for received frame!\n");
+ pr_debug("%s(), slsap_sel = %02x, dlsap_sel = %02x\n",
+ __func__, slsap_sel, dlsap_sel);
+ if (fp[0] & CONTROL_BIT) {
+ pr_debug("%s(), received control frame %02x\n",
+ __func__, fp[2]);
+ } else {
+ pr_debug("%s(), received data frame\n", __func__);
+ }
+ return;
+ }
+
+ /*
+ * Check if we received a control frame?
+ */
+ if (fp[0] & CONTROL_BIT) {
+ switch (fp[2]) {
+ case CONNECT_CMD:
+ lsap->lap = self;
+ irlmp_do_lsap_event(lsap, LM_CONNECT_INDICATION, skb);
+ break;
+ case CONNECT_CNF:
+ irlmp_do_lsap_event(lsap, LM_CONNECT_CONFIRM, skb);
+ break;
+ case DISCONNECT:
+ pr_debug("%s(), Disconnect indication!\n",
+ __func__);
+ irlmp_do_lsap_event(lsap, LM_DISCONNECT_INDICATION,
+ skb);
+ break;
+ case ACCESSMODE_CMD:
+ pr_debug("Access mode cmd not implemented!\n");
+ break;
+ case ACCESSMODE_CNF:
+ pr_debug("Access mode cnf not implemented!\n");
+ break;
+ default:
+ pr_debug("%s(), Unknown control frame %02x\n",
+ __func__, fp[2]);
+ break;
+ }
+ } else if (unreliable) {
+ /* Optimize and bypass the state machine if possible */
+ if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY)
+ irlmp_udata_indication(lsap, skb);
+ else
+ irlmp_do_lsap_event(lsap, LM_UDATA_INDICATION, skb);
+ } else {
+ /* Optimize and bypass the state machine if possible */
+ if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY)
+ irlmp_data_indication(lsap, skb);
+ else
+ irlmp_do_lsap_event(lsap, LM_DATA_INDICATION, skb);
+ }
+}
+
+/*
+ * Function irlmp_link_unitdata_indication (self, skb)
+ *
+ *
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_link_unitdata_indication(struct lap_cb *self, struct sk_buff *skb)
+{
+ struct lsap_cb *lsap;
+ __u8 slsap_sel; /* Source (this) LSAP address */
+ __u8 dlsap_sel; /* Destination LSAP address */
+ __u8 pid; /* Protocol identifier */
+ __u8 *fp;
+ unsigned long flags;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+ IRDA_ASSERT(skb->len > 2, return;);
+
+ fp = skb->data;
+
+ /*
+ * The next statements may be confusing, but we do this so that
+ * destination LSAP of received frame is source LSAP in our view
+ */
+ slsap_sel = fp[0] & LSAP_MASK;
+ dlsap_sel = fp[1];
+ pid = fp[2];
+
+ if (pid & 0x80) {
+ pr_debug("%s(), extension in PID not supp!\n",
+ __func__);
+ return;
+ }
+
+ /* Check if frame is addressed to the connectionless LSAP */
+ if ((slsap_sel != LSAP_CONNLESS) || (dlsap_sel != LSAP_CONNLESS)) {
+ pr_debug("%s(), dropping frame!\n", __func__);
+ return;
+ }
+
+ /* Search the connectionless LSAP */
+ spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+ lsap = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps);
+ while (lsap != NULL) {
+ /*
+ * Check if source LSAP and dest LSAP selectors and PID match.
+ */
+ if ((lsap->slsap_sel == slsap_sel) &&
+ (lsap->dlsap_sel == dlsap_sel) &&
+ (lsap->pid == pid))
+ {
+ break;
+ }
+ lsap = (struct lsap_cb *) hashbin_get_next(irlmp->unconnected_lsaps);
+ }
+ spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+ if (lsap)
+ irlmp_connless_data_indication(lsap, skb);
+ else {
+ pr_debug("%s(), found no matching LSAP!\n", __func__);
+ }
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlmp_link_disconnect_indication (reason, userdata)
+ *
+ * IrLAP has disconnected
+ *
+ */
+void irlmp_link_disconnect_indication(struct lap_cb *lap,
+ struct irlap_cb *irlap,
+ LAP_REASON reason,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(lap != NULL, return;);
+ IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+ lap->reason = reason;
+ lap->daddr = DEV_ADDR_ANY;
+
+ /* FIXME: must do something with the skb if any */
+
+ /*
+ * Inform station state machine
+ */
+ irlmp_do_lap_event(lap, LM_LAP_DISCONNECT_INDICATION, NULL);
+}
+
+/*
+ * Function irlmp_link_connect_indication (qos)
+ *
+ * Incoming LAP connection!
+ *
+ */
+void irlmp_link_connect_indication(struct lap_cb *self, __u32 saddr,
+ __u32 daddr, struct qos_info *qos,
+ struct sk_buff *skb)
+{
+ /* Copy QoS settings for this session */
+ self->qos = qos;
+
+ /* Update destination device address */
+ self->daddr = daddr;
+ IRDA_ASSERT(self->saddr == saddr, return;);
+
+ irlmp_do_lap_event(self, LM_LAP_CONNECT_INDICATION, skb);
+}
+
+/*
+ * Function irlmp_link_connect_confirm (qos)
+ *
+ * LAP connection confirmed!
+ *
+ */
+void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos,
+ struct sk_buff *skb)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+ IRDA_ASSERT(qos != NULL, return;);
+
+ /* Don't need use the skb for now */
+
+ /* Copy QoS settings for this session */
+ self->qos = qos;
+
+ irlmp_do_lap_event(self, LM_LAP_CONNECT_CONFIRM, NULL);
+}
+
+/*
+ * Function irlmp_link_discovery_indication (self, log)
+ *
+ * Device is discovering us
+ *
+ * It's not an answer to our own discoveries, just another device trying
+ * to perform discovery, but we don't want to miss the opportunity
+ * to exploit this information, because :
+ * o We may not actively perform discovery (just passive discovery)
+ * o This type of discovery is much more reliable. In some cases, it
+ * seem that less than 50% of our discoveries get an answer, while
+ * we always get ~100% of these.
+ * o Make faster discovery, statistically divide time of discovery
+ * events by 2 (important for the latency aspect and user feel)
+ * o Even is we do active discovery, the other node might not
+ * answer our discoveries (ex: Palm). The Palm will just perform
+ * one active discovery and connect directly to us.
+ *
+ * However, when both devices discover each other, they might attempt to
+ * connect to each other following the discovery event, and it would create
+ * collisions on the medium (SNRM battle).
+ * The "fix" for that is to disable all connection requests in IrLAP
+ * for 100ms after a discovery indication by setting the media_busy flag.
+ * Previously, we used to postpone the event which was quite ugly. Now
+ * that IrLAP takes care of this problem, just pass the event up...
+ *
+ * Jean II
+ */
+void irlmp_link_discovery_indication(struct lap_cb *self,
+ discovery_t *discovery)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+ /* Add to main log, cleanup */
+ irlmp_add_discovery(irlmp->cachelog, discovery);
+
+ /* Just handle it the same way as a discovery confirm,
+ * bypass the LM_LAP state machine (see below) */
+ irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_PASSIVE);
+}
+
+/*
+ * Function irlmp_link_discovery_confirm (self, log)
+ *
+ * Called by IrLAP with a list of discoveries after the discovery
+ * request has been carried out. A NULL log is received if IrLAP
+ * was unable to carry out the discovery request
+ *
+ */
+void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+ /* Add to main log, cleanup */
+ irlmp_add_discovery_log(irlmp->cachelog, log);
+
+ /* Propagate event to various LSAPs registered for it.
+ * We bypass the LM_LAP state machine because
+ * 1) We do it regardless of the LM_LAP state
+ * 2) It doesn't affect the LM_LAP state
+ * 3) Faster, slimer, simpler, ...
+ * Jean II */
+ irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_ACTIVE);
+}
+
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+static inline void irlmp_update_cache(struct lap_cb *lap,
+ struct lsap_cb *lsap)
+{
+ /* Prevent concurrent read to get garbage */
+ lap->cache.valid = FALSE;
+ /* Update cache entry */
+ lap->cache.dlsap_sel = lsap->dlsap_sel;
+ lap->cache.slsap_sel = lsap->slsap_sel;
+ lap->cache.lsap = lsap;
+ lap->cache.valid = TRUE;
+}
+#endif
+
+/*
+ * Function irlmp_find_handle (self, dlsap_sel, slsap_sel, status, queue)
+ *
+ * Find handle associated with destination and source LSAP
+ *
+ * Any IrDA connection (LSAP/TSAP) is uniquely identified by
+ * 3 parameters, the local lsap, the remote lsap and the remote address.
+ * We may initiate multiple connections to the same remote service
+ * (they will have different local lsap), a remote device may initiate
+ * multiple connections to the same local service (they will have
+ * different remote lsap), or multiple devices may connect to the same
+ * service and may use the same remote lsap (and they will have
+ * different remote address).
+ * So, where is the remote address ? Each LAP connection is made with
+ * a single remote device, so imply a specific remote address.
+ * Jean II
+ */
+static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap_sel,
+ __u8 slsap_sel, int status,
+ hashbin_t *queue)
+{
+ struct lsap_cb *lsap;
+ unsigned long flags;
+
+ /*
+ * Optimize for the common case. We assume that the last frame
+ * received is in the same connection as the last one, so check in
+ * cache first to avoid the linear search
+ */
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ if ((self->cache.valid) &&
+ (self->cache.slsap_sel == slsap_sel) &&
+ (self->cache.dlsap_sel == dlsap_sel))
+ {
+ return self->cache.lsap;
+ }
+#endif
+
+ spin_lock_irqsave(&queue->hb_spinlock, flags);
+
+ lsap = (struct lsap_cb *) hashbin_get_first(queue);
+ while (lsap != NULL) {
+ /*
+ * If this is an incoming connection, then the destination
+ * LSAP selector may have been specified as LM_ANY so that
+ * any client can connect. In that case we only need to check
+ * if the source LSAP (in our view!) match!
+ */
+ if ((status == CONNECT_CMD) &&
+ (lsap->slsap_sel == slsap_sel) &&
+ (lsap->dlsap_sel == LSAP_ANY)) {
+ /* This is where the dest lsap sel is set on incoming
+ * lsaps */
+ lsap->dlsap_sel = dlsap_sel;
+ break;
+ }
+ /*
+ * Check if source LSAP and dest LSAP selectors match.
+ */
+ if ((lsap->slsap_sel == slsap_sel) &&
+ (lsap->dlsap_sel == dlsap_sel))
+ break;
+
+ lsap = (struct lsap_cb *) hashbin_get_next(queue);
+ }
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+ if(lsap)
+ irlmp_update_cache(self, lsap);
+#endif
+ spin_unlock_irqrestore(&queue->hb_spinlock, flags);
+
+ /* Return what we've found or NULL */
+ return lsap;
+}
diff --git a/net/irda/irmod.c b/net/irda/irmod.c
new file mode 100644
index 000000000..c5e35b85c
--- /dev/null
+++ b/net/irda/irmod.c
@@ -0,0 +1,199 @@
+/*********************************************************************
+ *
+ * Filename: irmod.c
+ * Version: 0.9
+ * Description: IrDA stack main entry points
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Dec 15 13:55:39 1997
+ * Modified at: Wed Jan 5 15:12:41 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1999-2000 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * This file contains the main entry points of the IrDA stack.
+ * They are in this file and not af_irda.c because some developpers
+ * are using the IrDA stack without the socket API (compiling out
+ * af_irda.c).
+ * Jean II
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h> /* notify_t */
+#include <net/irda/irlap.h> /* irlap_init */
+#include <net/irda/irlmp.h> /* irlmp_init */
+#include <net/irda/iriap.h> /* iriap_init */
+#include <net/irda/irttp.h> /* irttp_init */
+#include <net/irda/irda_device.h> /* irda_device_init */
+
+/* Packet type handler.
+ * Tell the kernel how IrDA packets should be handled.
+ */
+static struct packet_type irda_packet_type __read_mostly = {
+ .type = cpu_to_be16(ETH_P_IRDA),
+ .func = irlap_driver_rcv, /* Packet type handler irlap_frame.c */
+};
+
+/*
+ * Function irda_notify_init (notify)
+ *
+ * Used for initializing the notify structure
+ *
+ */
+void irda_notify_init(notify_t *notify)
+{
+ notify->data_indication = NULL;
+ notify->udata_indication = NULL;
+ notify->connect_confirm = NULL;
+ notify->connect_indication = NULL;
+ notify->disconnect_indication = NULL;
+ notify->flow_indication = NULL;
+ notify->status_indication = NULL;
+ notify->instance = NULL;
+ strlcpy(notify->name, "Unknown", sizeof(notify->name));
+}
+EXPORT_SYMBOL(irda_notify_init);
+
+/*
+ * Function irda_init (void)
+ *
+ * Protocol stack initialisation entry point.
+ * Initialise the various components of the IrDA stack
+ */
+static int __init irda_init(void)
+{
+ int ret = 0;
+
+ /* Lower layer of the stack */
+ irlmp_init();
+ irlap_init();
+
+ /* Driver/dongle support */
+ irda_device_init();
+
+ /* Higher layers of the stack */
+ iriap_init();
+ irttp_init();
+ ret = irsock_init();
+ if (ret < 0)
+ goto out_err_1;
+
+ /* Add IrDA packet type (Start receiving packets) */
+ dev_add_pack(&irda_packet_type);
+
+ /* External APIs */
+#ifdef CONFIG_PROC_FS
+ irda_proc_register();
+#endif
+#ifdef CONFIG_SYSCTL
+ ret = irda_sysctl_register();
+ if (ret < 0)
+ goto out_err_2;
+#endif
+
+ ret = irda_nl_register();
+ if (ret < 0)
+ goto out_err_3;
+
+ return 0;
+
+ out_err_3:
+#ifdef CONFIG_SYSCTL
+ irda_sysctl_unregister();
+ out_err_2:
+#endif
+#ifdef CONFIG_PROC_FS
+ irda_proc_unregister();
+#endif
+
+ /* Remove IrDA packet type (stop receiving packets) */
+ dev_remove_pack(&irda_packet_type);
+
+ /* Remove higher layers */
+ irsock_cleanup();
+ out_err_1:
+ irttp_cleanup();
+ iriap_cleanup();
+
+ /* Remove lower layers */
+ irda_device_cleanup();
+ irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */
+
+ /* Remove middle layer */
+ irlmp_cleanup();
+
+
+ return ret;
+}
+
+/*
+ * Function irda_cleanup (void)
+ *
+ * Protocol stack cleanup/removal entry point.
+ * Cleanup the various components of the IrDA stack
+ */
+static void __exit irda_cleanup(void)
+{
+ /* Remove External APIs */
+ irda_nl_unregister();
+
+#ifdef CONFIG_SYSCTL
+ irda_sysctl_unregister();
+#endif
+#ifdef CONFIG_PROC_FS
+ irda_proc_unregister();
+#endif
+
+ /* Remove IrDA packet type (stop receiving packets) */
+ dev_remove_pack(&irda_packet_type);
+
+ /* Remove higher layers */
+ irsock_cleanup();
+ irttp_cleanup();
+ iriap_cleanup();
+
+ /* Remove lower layers */
+ irda_device_cleanup();
+ irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */
+
+ /* Remove middle layer */
+ irlmp_cleanup();
+}
+
+/*
+ * The IrDA stack must be initialised *before* drivers get initialised,
+ * and *before* higher protocols (IrLAN/IrCOMM/IrNET) get initialised,
+ * otherwise bad things will happen (hashbins will be NULL for example).
+ * Those modules are at module_init()/device_initcall() level.
+ *
+ * On the other hand, it needs to be initialised *after* the basic
+ * networking, the /proc/net filesystem and sysctl module. Those are
+ * currently initialised in .../init/main.c (before initcalls).
+ * Also, IrDA drivers needs to be initialised *after* the random number
+ * generator (main stack and higher layer init don't need it anymore).
+ *
+ * Jean II
+ */
+subsys_initcall(irda_init);
+module_exit(irda_cleanup);
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> & Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("The Linux IrDA Protocol Stack");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_NETPROTO(PF_IRDA);
diff --git a/net/irda/irnet/Kconfig b/net/irda/irnet/Kconfig
new file mode 100644
index 000000000..28c557f0f
--- /dev/null
+++ b/net/irda/irnet/Kconfig
@@ -0,0 +1,13 @@
+config IRNET
+ tristate "IrNET protocol"
+ depends on IRDA && PPP
+ help
+ Say Y here if you want to build support for the IrNET protocol.
+ To compile it as a module, choose M here: the module will be
+ called irnet. IrNET is a PPP driver, so you will also need a
+ working PPP subsystem (driver, daemon and config)...
+
+ IrNET is an alternate way to transfer TCP/IP traffic over IrDA. It
+ uses synchronous PPP over a set of point to point IrDA sockets. You
+ can use it between Linux machine or with W2k.
+
diff --git a/net/irda/irnet/Makefile b/net/irda/irnet/Makefile
new file mode 100644
index 000000000..61c365c8a
--- /dev/null
+++ b/net/irda/irnet/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux IrDA IrNET protocol layer.
+#
+
+obj-$(CONFIG_IRNET) += irnet.o
+
+irnet-y := irnet_ppp.o irnet_irda.o
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
new file mode 100644
index 000000000..8d65bb947
--- /dev/null
+++ b/net/irda/irnet/irnet.h
@@ -0,0 +1,523 @@
+/*
+ * IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ * Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains definitions and declarations global to the IrNET module,
+ * all grouped in one place...
+ * This file is a *private* header, so other modules don't want to know
+ * what's in there...
+ *
+ * Note : as most part of the Linux kernel, this module is available
+ * under the GNU General Public License (GPL).
+ */
+
+#ifndef IRNET_H
+#define IRNET_H
+
+/************************** DOCUMENTATION ***************************/
+/*
+ * What is IrNET
+ * -------------
+ * IrNET is a protocol allowing to carry TCP/IP traffic between two
+ * IrDA peers in an efficient fashion. It is a thin layer, passing PPP
+ * packets to IrTTP and vice versa. It uses PPP in synchronous mode,
+ * because IrTTP offer a reliable sequenced packet service (as opposed
+ * to a byte stream). In fact, you could see IrNET as carrying TCP/IP
+ * in a IrDA socket, using PPP to provide the glue.
+ *
+ * The main difference with traditional PPP over IrCOMM is that we
+ * avoid the framing and serial emulation which are a performance
+ * bottleneck. It also allows multipoint communications in a sensible
+ * fashion.
+ *
+ * The main difference with IrLAN is that we use PPP for the link
+ * management, which is more standard, interoperable and flexible than
+ * the IrLAN protocol. For example, PPP adds authentication,
+ * encryption, compression, header compression and automated routing
+ * setup. And, as IrNET let PPP do the hard work, the implementation
+ * is much simpler than IrLAN.
+ *
+ * The Linux implementation
+ * ------------------------
+ * IrNET is written on top of the Linux-IrDA stack, and interface with
+ * the generic Linux PPP driver. Because IrNET depend on recent
+ * changes of the PPP driver interface, IrNET will work only with very
+ * recent kernel (2.3.99-pre6 and up).
+ *
+ * The present implementation offer the following features :
+ * o simple user interface using pppd
+ * o efficient implementation (interface directly to PPP and IrTTP)
+ * o addressing (you can specify the name of the IrNET recipient)
+ * o multipoint operation (limited by IrLAP specification)
+ * o information in /proc/net/irda/irnet
+ * o IrNET events on /dev/irnet (for user space daemon)
+ * o IrNET daemon (irnetd) to automatically handle incoming requests
+ * o Windows 2000 compatibility (tested, but need more work)
+ * Currently missing :
+ * o Lot's of testing (that's your job)
+ * o Connection retries (may be too hard to do)
+ * o Check pppd persist mode
+ * o User space daemon (to automatically handle incoming requests)
+ *
+ * The setup is not currently the most easy, but this should get much
+ * better when everything will get integrated...
+ *
+ * Acknowledgements
+ * ----------------
+ * This module is based on :
+ * o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras
+ * o The IrLAN protocol (irlan_common/XXX) by Dag Brattli
+ * o The IrSock interface (af_irda) by Dag Brattli
+ * o Some other bits from the kernel and my drivers...
+ * Infinite thanks to those brave souls for providing the infrastructure
+ * upon which IrNET is built.
+ *
+ * Thanks to all my colleagues in HP for helping me. In particular,
+ * thanks to Salil Pradhan and Bill Serra for W2k testing...
+ * Thanks to Luiz Magalhaes for irnetd and much testing...
+ *
+ * Thanks to Alan Cox for answering lot's of my stupid questions, and
+ * to Paul Mackerras answering my questions on how to best integrate
+ * IrNET and pppd.
+ *
+ * Jean II
+ *
+ * Note on some implementations choices...
+ * ------------------------------------
+ * 1) Direct interface vs tty/socket
+ * I could have used a tty interface to hook to ppp and use the full
+ * socket API to connect to IrDA. The code would have been easier to
+ * maintain, and maybe the code would have been smaller...
+ * Instead, we hook directly to ppp_generic and to IrTTP, which make
+ * things more complicated...
+ *
+ * The first reason is flexibility : this allow us to create IrNET
+ * instances on demand (no /dev/ircommX crap) and to allow linkname
+ * specification on pppd command line...
+ *
+ * Second reason is speed optimisation. If you look closely at the
+ * transmit and receive paths, you will notice that they are "super lean"
+ * (that's why they look ugly), with no function calls and as little data
+ * copy and modification as I could...
+ *
+ * 2) irnetd in user space
+ * irnetd is implemented in user space, which is necessary to call pppd.
+ * This also give maximum benefits in term of flexibility and customability,
+ * and allow to offer the event channel, useful for other stuff like debug.
+ *
+ * On the other hand, this require a loose coordination between the
+ * present module and irnetd. One critical area is how incoming request
+ * are handled.
+ * When irnet receive an incoming request, it send an event to irnetd and
+ * drop the incoming IrNET socket.
+ * irnetd start a pppd instance, which create a new IrNET socket. This new
+ * socket is then connected in the originating node to the pppd instance.
+ * At this point, in the originating node, the first socket is closed.
+ *
+ * I admit, this is a bit messy and waste some resources. The alternative
+ * is caching incoming socket, and that's also quite messy and waste
+ * resources.
+ * We also make connection time slower. For example, on a 115 kb/s link it
+ * adds 60ms to the connection time (770 ms). However, this is slower than
+ * the time it takes to fire up pppd on my P133...
+ *
+ *
+ * History :
+ * -------
+ *
+ * v1 - 15.5.00 - Jean II
+ * o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint)
+ * o control channel on /dev/irnet (set name/address)
+ * o event channel on /dev/irnet (for user space daemon)
+ *
+ * v2 - 5.6.00 - Jean II
+ * o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness...
+ * o Add DISCONNECT_TO event and rename DISCONNECT_FROM.
+ * o Set official device number alloaction on /dev/irnet
+ *
+ * v3 - 30.8.00 - Jean II
+ * o Update to latest Linux-IrDA changes :
+ * - queue_t => irda_queue_t
+ * o Update to ppp-2.4.0 :
+ * - move irda_irnet_connect from PPPIOCATTACH to TIOCSETD
+ * o Add EXPIRE event (depend on new IrDA-Linux patch)
+ * o Switch from `hashbin_remove' to `hashbin_remove_this' to fix
+ * a multilink bug... (depend on new IrDA-Linux patch)
+ * o fix a self->daddr to self->raddr in irda_irnet_connect to fix
+ * another multilink bug (darn !)
+ * o Remove LINKNAME_IOCTL cruft
+ *
+ * v3b - 31.8.00 - Jean II
+ * o Dump discovery log at event channel startup
+ *
+ * v4 - 28.9.00 - Jean II
+ * o Fix interaction between poll/select and dump discovery log
+ * o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch)
+ * o Add IRNET_NOANSWER_FROM event (mostly to help support)
+ * o Release flow control in disconnect_indication
+ * o Block packets while connecting (speed up connections)
+ *
+ * v5 - 11.01.01 - Jean II
+ * o Init self->max_header_size, just in case...
+ * o Set up ap->chan.hdrlen, to get zero copy on tx side working.
+ * o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state
+ * Thanks to Christian Gennerat for finding this bug !
+ * ---
+ * o Declare the proper MTU/MRU that we can support
+ * (but PPP doesn't read the MTU value :-()
+ * o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid
+ * disabling and enabling irq twice
+ *
+ * v6 - 31.05.01 - Jean II
+ * o Print source address in Found, Discovery, Expiry & Request events
+ * o Print requested source address in /proc/net/irnet
+ * o Change control channel input. Allow multiple commands in one line.
+ * o Add saddr command to change ap->rsaddr (and use that in IrDA)
+ * ---
+ * o Make the IrDA connection procedure totally asynchronous.
+ * Heavy rewrite of the IAS query code and the whole connection
+ * procedure. Now, irnet_connect() no longer need to be called from
+ * a process context...
+ * o Enable IrDA connect retries in ppp_irnet_send(). The good thing
+ * is that IrDA connect retries are directly driven by PPP LCP
+ * retries (we retry for each LCP packet), so that everything
+ * is transparently controlled from pppd lcp-max-configure.
+ * o Add ttp_connect flag to prevent rentry on the connect procedure
+ * o Test and fixups to eliminate side effects of retries
+ *
+ * v7 - 22.08.01 - Jean II
+ * o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY"
+ * o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the
+ * asynchronous IAS query, self->tsap is NULL when PPP send the
+ * first packet. This was preventing "connect-delay 0" to work.
+ * Change the test in ppp_irnet_send() to self->ttp_connect.
+ *
+ * v8 - 1.11.01 - Jean II
+ * o Tighten the use of self->ttp_connect and self->ttp_open to
+ * prevent various race conditions.
+ * o Avoid leaking discovery log and skb
+ * o Replace "self" with "server" in irnet_connect_indication() to
+ * better detect cut'n'paste error ;-)
+ *
+ * v9 - 29.11.01 - Jean II
+ * o Fix event generation in disconnect indication that I broke in v8
+ * It was always generation "No-Answer" because I was testing ttp_open
+ * just after clearing it. *blush*.
+ * o Use newly created irttp_listen() to fix potential crash when LAP
+ * destroyed before irnet module removed.
+ *
+ * v10 - 4.3.2 - Jean II
+ * o When receiving a disconnect indication, don't reenable the
+ * PPP Tx queue, this will trigger a reconnect. Instead, close
+ * the channel, which will kill pppd...
+ *
+ * v11 - 20.3.02 - Jean II
+ * o Oops ! v10 fix disabled IrNET retries and passive behaviour.
+ * Better fix in irnet_disconnect_indication() :
+ * - if connected, kill pppd via hangup.
+ * - if not connected, reenable ppp Tx, which trigger IrNET retry.
+ *
+ * v12 - 10.4.02 - Jean II
+ * o Fix race condition in irnet_connect_indication().
+ * If the socket was already trying to connect, drop old connection
+ * and use new one only if acting as primary. See comments.
+ *
+ * v13 - 30.5.02 - Jean II
+ * o Update module init code
+ *
+ * v14 - 20.2.03 - Jean II
+ * o Add discovery hint bits in the control channel.
+ * o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner
+ *
+ * v15 - 7.4.03 - Jean II
+ * o Replace spin_lock_irqsave() with spin_lock_bh() so that we can
+ * use ppp_unit_number(). It's probably also better overall...
+ * o Disable call to ppp_unregister_channel(), because we can't do it.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/tty.h>
+#include <linux/proc_fs.h>
+#include <linux/netdevice.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/capability.h>
+#include <linux/ctype.h> /* isspace() */
+#include <linux/string.h> /* skip_spaces() */
+#include <asm/uaccess.h>
+#include <linux/init.h>
+
+#include <linux/ppp_defs.h>
+#include <linux/ppp-ioctl.h>
+#include <linux/ppp_channel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+#include <net/irda/discovery.h>
+
+/***************************** OPTIONS *****************************/
+/*
+ * Define or undefine to compile or not some optional part of the
+ * IrNET driver...
+ * Note : the present defaults make sense, play with that at your
+ * own risk...
+ */
+/* IrDA side of the business... */
+#define DISCOVERY_NOMASK /* To enable W2k compatibility... */
+#define ADVERTISE_HINT /* Advertise IrLAN hint bit */
+#define ALLOW_SIMULT_CONNECT /* This seem to work, cross fingers... */
+#define DISCOVERY_EVENTS /* Query the discovery log to post events */
+#define INITIAL_DISCOVERY /* Dump current discovery log as events */
+#undef STREAM_COMPAT /* Not needed - potentially messy */
+#undef CONNECT_INDIC_KICK /* Might mess IrDA, not needed */
+#undef FAIL_SEND_DISCONNECT /* Might mess IrDA, not needed */
+#undef PASS_CONNECT_PACKETS /* Not needed ? Safe */
+#undef MISSING_PPP_API /* Stuff I wish I could do */
+
+/* PPP side of the business */
+#define BLOCK_WHEN_CONNECT /* Block packets when connecting */
+#define CONNECT_IN_SEND /* Retry IrDA connection procedure */
+#undef FLUSH_TO_PPP /* Not sure about this one, let's play safe */
+#undef SECURE_DEVIRNET /* Bah... */
+
+/****************************** DEBUG ******************************/
+
+/*
+ * This set of flags enable and disable all the various warning,
+ * error and debug message of this driver.
+ * Each section can be enabled and disabled independently
+ */
+/* In the PPP part */
+#define DEBUG_CTRL_TRACE 0 /* Control channel */
+#define DEBUG_CTRL_INFO 0 /* various info */
+#define DEBUG_CTRL_ERROR 1 /* problems */
+#define DEBUG_FS_TRACE 0 /* filesystem callbacks */
+#define DEBUG_FS_INFO 0 /* various info */
+#define DEBUG_FS_ERROR 1 /* problems */
+#define DEBUG_PPP_TRACE 0 /* PPP related functions */
+#define DEBUG_PPP_INFO 0 /* various info */
+#define DEBUG_PPP_ERROR 1 /* problems */
+#define DEBUG_MODULE_TRACE 0 /* module insertion/removal */
+#define DEBUG_MODULE_ERROR 1 /* problems */
+
+/* In the IrDA part */
+#define DEBUG_IRDA_SR_TRACE 0 /* IRDA subroutines */
+#define DEBUG_IRDA_SR_INFO 0 /* various info */
+#define DEBUG_IRDA_SR_ERROR 1 /* problems */
+#define DEBUG_IRDA_SOCK_TRACE 0 /* IRDA main socket functions */
+#define DEBUG_IRDA_SOCK_INFO 0 /* various info */
+#define DEBUG_IRDA_SOCK_ERROR 1 /* problems */
+#define DEBUG_IRDA_SERV_TRACE 0 /* The IrNET server */
+#define DEBUG_IRDA_SERV_INFO 0 /* various info */
+#define DEBUG_IRDA_SERV_ERROR 1 /* problems */
+#define DEBUG_IRDA_TCB_TRACE 0 /* IRDA IrTTP callbacks */
+#define DEBUG_IRDA_CB_INFO 0 /* various info */
+#define DEBUG_IRDA_CB_ERROR 1 /* problems */
+#define DEBUG_IRDA_OCB_TRACE 0 /* IRDA other callbacks */
+#define DEBUG_IRDA_OCB_INFO 0 /* various info */
+#define DEBUG_IRDA_OCB_ERROR 1 /* problems */
+
+#define DEBUG_ASSERT 0 /* Verify all assertions */
+
+/*
+ * These are the macros we are using to actually print the debug
+ * statements. Don't look at it, it's ugly...
+ *
+ * One of the trick is that, as the DEBUG_XXX are constant, the
+ * compiler will optimise away the if() in all cases.
+ */
+/* All error messages (will show up in the normal logs) */
+#define DERROR(dbg, format, args...) \
+ {if(DEBUG_##dbg) \
+ printk(KERN_INFO "irnet: %s(): " format, __func__ , ##args);}
+
+/* Normal debug message (will show up in /var/log/debug) */
+#define DEBUG(dbg, format, args...) \
+ {if(DEBUG_##dbg) \
+ printk(KERN_DEBUG "irnet: %s(): " format, __func__ , ##args);}
+
+/* Entering a function (trace) */
+#define DENTER(dbg, format, args...) \
+ {if(DEBUG_##dbg) \
+ printk(KERN_DEBUG "irnet: -> %s" format, __func__ , ##args);}
+
+/* Entering and exiting a function in one go (trace) */
+#define DPASS(dbg, format, args...) \
+ {if(DEBUG_##dbg) \
+ printk(KERN_DEBUG "irnet: <>%s" format, __func__ , ##args);}
+
+/* Exiting a function (trace) */
+#define DEXIT(dbg, format, args...) \
+ {if(DEBUG_##dbg) \
+ printk(KERN_DEBUG "irnet: <-%s()" format, __func__ , ##args);}
+
+/* Exit a function with debug */
+#define DRETURN(ret, dbg, args...) \
+ {DEXIT(dbg, ": " args);\
+ return ret; }
+
+/* Exit a function on failed condition */
+#define DABORT(cond, ret, dbg, args...) \
+ {if(cond) {\
+ DERROR(dbg, args);\
+ return ret; }}
+
+/* Invalid assertion, print out an error and exit... */
+#define DASSERT(cond, ret, dbg, args...) \
+ {if((DEBUG_ASSERT) && !(cond)) {\
+ DERROR(dbg, "Invalid assertion: " args);\
+ return ret; }}
+
+/************************ CONSTANTS & MACROS ************************/
+
+/* Paranoia */
+#define IRNET_MAGIC 0xB00754
+
+/* Number of control events in the control channel buffer... */
+#define IRNET_MAX_EVENTS 8 /* Should be more than enough... */
+
+/****************************** TYPES ******************************/
+
+/*
+ * This is the main structure where we store all the data pertaining to
+ * one instance of irnet.
+ * Note : in irnet functions, a pointer this structure is usually called
+ * "ap" or "self". If the code is borrowed from the IrDA stack, it tend
+ * to be called "self", and if it is borrowed from the PPP driver it is
+ * "ap". Apart from that, it's exactly the same structure ;-)
+ */
+typedef struct irnet_socket
+{
+ /* ------------------- Instance management ------------------- */
+ /* We manage a linked list of IrNET socket instances */
+ irda_queue_t q; /* Must be first - for hasbin */
+ int magic; /* Paranoia */
+
+ /* --------------------- FileSystem part --------------------- */
+ /* "pppd" interact directly with us on a /dev/ file */
+ struct file * file; /* File descriptor of this instance */
+ /* TTY stuff - to keep "pppd" happy */
+ struct ktermios termios; /* Various tty flags */
+ /* Stuff for the control channel */
+ int event_index; /* Last read in the event log */
+
+ /* ------------------------- PPP part ------------------------- */
+ /* We interface directly to the ppp_generic driver in the kernel */
+ int ppp_open; /* registered with ppp_generic */
+ struct ppp_channel chan; /* Interface to generic ppp layer */
+
+ int mru; /* Max size of PPP payload */
+ u32 xaccm[8]; /* Asynchronous character map (just */
+ u32 raccm; /* to please pppd - dummy) */
+ unsigned int flags; /* PPP flags (compression, ...) */
+ unsigned int rbits; /* Unused receive flags ??? */
+ struct work_struct disconnect_work; /* Process context disconnection */
+ /* ------------------------ IrTTP part ------------------------ */
+ /* We create a pseudo "socket" over the IrDA tranport */
+ unsigned long ttp_open; /* Set when IrTTP is ready */
+ unsigned long ttp_connect; /* Set when IrTTP is connecting */
+ struct tsap_cb * tsap; /* IrTTP instance (the connection) */
+
+ char rname[NICKNAME_MAX_LEN + 1];
+ /* IrDA nickname of destination */
+ __u32 rdaddr; /* Requested peer IrDA address */
+ __u32 rsaddr; /* Requested local IrDA address */
+ __u32 daddr; /* actual peer IrDA address */
+ __u32 saddr; /* my local IrDA address */
+ __u8 dtsap_sel; /* Remote TSAP selector */
+ __u8 stsap_sel; /* Local TSAP selector */
+
+ __u32 max_sdu_size_rx;/* Socket parameters used for IrTTP */
+ __u32 max_sdu_size_tx;
+ __u32 max_data_size;
+ __u8 max_header_size;
+ LOCAL_FLOW tx_flow; /* State of the Tx path in IrTTP */
+
+ /* ------------------- IrLMP and IrIAS part ------------------- */
+ /* Used for IrDA Discovery and socket name resolution */
+ void * ckey; /* IrLMP client handle */
+ __u16 mask; /* Hint bits mask (filter discov.)*/
+ int nslots; /* Number of slots for discovery */
+
+ struct iriap_cb * iriap; /* Used to query remote IAS */
+ int errno; /* status of the IAS query */
+
+ /* -------------------- Discovery log part -------------------- */
+ /* Used by initial discovery on the control channel
+ * and by irnet_discover_daddr_and_lsap_sel() */
+ struct irda_device_info *discoveries; /* Copy of the discovery log */
+ int disco_index; /* Last read in the discovery log */
+ int disco_number; /* Size of the discovery log */
+
+ struct mutex lock;
+
+} irnet_socket;
+
+/*
+ * This is the various event that we will generate on the control channel
+ */
+typedef enum irnet_event
+{
+ IRNET_DISCOVER, /* New IrNET node discovered */
+ IRNET_EXPIRE, /* IrNET node expired */
+ IRNET_CONNECT_TO, /* IrNET socket has connected to other node */
+ IRNET_CONNECT_FROM, /* Other node has connected to IrNET socket */
+ IRNET_REQUEST_FROM, /* Non satisfied connection request */
+ IRNET_NOANSWER_FROM, /* Failed connection request */
+ IRNET_BLOCKED_LINK, /* Link (IrLAP) is blocked for > 3s */
+ IRNET_DISCONNECT_FROM, /* IrNET socket has disconnected */
+ IRNET_DISCONNECT_TO /* Closing IrNET socket */
+} irnet_event;
+
+/*
+ * This is the storage for an event and its arguments
+ */
+typedef struct irnet_log
+{
+ irnet_event event;
+ int unit;
+ __u32 saddr;
+ __u32 daddr;
+ char name[NICKNAME_MAX_LEN + 1]; /* 21 + 1 */
+ __u16_host_order hints; /* Discovery hint bits */
+} irnet_log;
+
+/*
+ * This is the storage for all events and related stuff...
+ */
+typedef struct irnet_ctrl_channel
+{
+ irnet_log log[IRNET_MAX_EVENTS]; /* Event log */
+ int index; /* Current index in log */
+ spinlock_t spinlock; /* Serialize access to the event log */
+ wait_queue_head_t rwait; /* processes blocked on read (or poll) */
+} irnet_ctrl_channel;
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Global functions of the IrNET module
+ * Note : we list here also functions called from one file to the other.
+ */
+
+/* -------------------------- IRDA PART -------------------------- */
+int irda_irnet_create(irnet_socket *); /* Initialise an IrNET socket */
+int irda_irnet_connect(irnet_socket *); /* Try to connect over IrDA */
+void irda_irnet_destroy(irnet_socket *); /* Teardown an IrNET socket */
+int irda_irnet_init(void); /* Initialise IrDA part of IrNET */
+void irda_irnet_cleanup(void); /* Teardown IrDA part of IrNET */
+
+/**************************** VARIABLES ****************************/
+
+/* Control channel stuff - allocated in irnet_irda.h */
+extern struct irnet_ctrl_channel irnet_events;
+
+#endif /* IRNET_H */
diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c
new file mode 100644
index 000000000..7f17a8020
--- /dev/null
+++ b/net/irda/irnet/irnet_irda.c
@@ -0,0 +1,1885 @@
+/*
+ * IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ * Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file implement the IRDA interface of IrNET.
+ * Basically, we sit on top of IrTTP. We set up IrTTP, IrIAS properly,
+ * and exchange frames with IrTTP.
+ */
+
+#include "irnet_irda.h" /* Private header */
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+/*
+ * PPP disconnect work: we need to make sure we're in
+ * process context when calling ppp_unregister_channel().
+ */
+static void irnet_ppp_disconnect(struct work_struct *work)
+{
+ irnet_socket * self =
+ container_of(work, irnet_socket, disconnect_work);
+
+ if (self == NULL)
+ return;
+ /*
+ * If we were connected, cleanup & close the PPP
+ * channel, which will kill pppd (hangup) and the rest.
+ */
+ if (self->ppp_open && !self->ttp_open && !self->ttp_connect) {
+ ppp_unregister_channel(&self->chan);
+ self->ppp_open = 0;
+ }
+}
+
+/************************* CONTROL CHANNEL *************************/
+/*
+ * When ppp is not active, /dev/irnet act as a control channel.
+ * Writing allow to set up the IrDA destination of the IrNET channel,
+ * and any application may be read events happening on IrNET...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Post an event to the control channel...
+ * Put the event in the log, and then wait all process blocked on read
+ * so they can read the log...
+ */
+static void
+irnet_post_event(irnet_socket * ap,
+ irnet_event event,
+ __u32 saddr,
+ __u32 daddr,
+ char * name,
+ __u16 hints)
+{
+ int index; /* In the log */
+
+ DENTER(CTRL_TRACE, "(ap=0x%p, event=%d, daddr=%08x, name=``%s'')\n",
+ ap, event, daddr, name);
+
+ /* Protect this section via spinlock.
+ * Note : as we are the only event producer, we only need to exclude
+ * ourself when touching the log, which is nice and easy.
+ */
+ spin_lock_bh(&irnet_events.spinlock);
+
+ /* Copy the event in the log */
+ index = irnet_events.index;
+ irnet_events.log[index].event = event;
+ irnet_events.log[index].daddr = daddr;
+ irnet_events.log[index].saddr = saddr;
+ /* Try to copy IrDA nickname */
+ if(name)
+ strcpy(irnet_events.log[index].name, name);
+ else
+ irnet_events.log[index].name[0] = '\0';
+ /* Copy hints */
+ irnet_events.log[index].hints.word = hints;
+ /* Try to get ppp unit number */
+ if((ap != (irnet_socket *) NULL) && (ap->ppp_open))
+ irnet_events.log[index].unit = ppp_unit_number(&ap->chan);
+ else
+ irnet_events.log[index].unit = -1;
+
+ /* Increment the index
+ * Note that we increment the index only after the event is written,
+ * to make sure that the readers don't get garbage... */
+ irnet_events.index = (index + 1) % IRNET_MAX_EVENTS;
+
+ DEBUG(CTRL_INFO, "New event index is %d\n", irnet_events.index);
+
+ /* Spin lock end */
+ spin_unlock_bh(&irnet_events.spinlock);
+
+ /* Now : wake up everybody waiting for events... */
+ wake_up_interruptible_all(&irnet_events.rwait);
+
+ DEXIT(CTRL_TRACE, "\n");
+}
+
+/************************* IRDA SUBROUTINES *************************/
+/*
+ * These are a bunch of subroutines called from other functions
+ * down there, mostly common code or to improve readability...
+ *
+ * Note : we duplicate quite heavily some routines of af_irda.c,
+ * because our input structure (self) is quite different
+ * (struct irnet instead of struct irda_sock), which make sharing
+ * the same code impossible (at least, without templates).
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_open_tsap (self)
+ *
+ * Open local Transport Service Access Point (TSAP)
+ *
+ * Create a IrTTP instance for us and set all the IrTTP callbacks.
+ */
+static inline int
+irnet_open_tsap(irnet_socket * self)
+{
+ notify_t notify; /* Callback structure */
+
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ DABORT(self->tsap != NULL, -EBUSY, IRDA_SR_ERROR, "Already busy !\n");
+
+ /* Initialize IrTTP callbacks to be used by the IrDA stack */
+ irda_notify_init(&notify);
+ notify.connect_confirm = irnet_connect_confirm;
+ notify.connect_indication = irnet_connect_indication;
+ notify.disconnect_indication = irnet_disconnect_indication;
+ notify.data_indication = irnet_data_indication;
+ /*notify.udata_indication = NULL;*/
+ notify.flow_indication = irnet_flow_indication;
+ notify.status_indication = irnet_status_indication;
+ notify.instance = self;
+ strlcpy(notify.name, IRNET_NOTIFY_NAME, sizeof(notify.name));
+
+ /* Open an IrTTP instance */
+ self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT,
+ &notify);
+ DABORT(self->tsap == NULL, -ENOMEM,
+ IRDA_SR_ERROR, "Unable to allocate TSAP !\n");
+
+ /* Remember which TSAP selector we actually got */
+ self->stsap_sel = self->tsap->stsap_sel;
+
+ DEXIT(IRDA_SR_TRACE, " - tsap=0x%p, sel=0x%X\n",
+ self->tsap, self->stsap_sel);
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_ias_to_tsap (self, result, value)
+ *
+ * Examine an IAS object and extract TSAP
+ *
+ * We do an IAP query to find the TSAP associated with the IrNET service.
+ * When IrIAP pass us the result of the query, this function look at
+ * the return values to check for failures and extract the TSAP if
+ * possible.
+ * Also deallocate value
+ * The failure is in self->errno
+ * Return TSAP or -1
+ */
+static inline __u8
+irnet_ias_to_tsap(irnet_socket * self,
+ int result,
+ struct ias_value * value)
+{
+ __u8 dtsap_sel = 0; /* TSAP we are looking for */
+
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ /* By default, no error */
+ self->errno = 0;
+
+ /* Check if request succeeded */
+ switch(result)
+ {
+ /* Standard errors : service not available */
+ case IAS_CLASS_UNKNOWN:
+ case IAS_ATTRIB_UNKNOWN:
+ DEBUG(IRDA_SR_INFO, "IAS object doesn't exist ! (%d)\n", result);
+ self->errno = -EADDRNOTAVAIL;
+ break;
+
+ /* Other errors, most likely IrDA stack failure */
+ default :
+ DEBUG(IRDA_SR_INFO, "IAS query failed ! (%d)\n", result);
+ self->errno = -EHOSTUNREACH;
+ break;
+
+ /* Success : we got what we wanted */
+ case IAS_SUCCESS:
+ break;
+ }
+
+ /* Check what was returned to us */
+ if(value != NULL)
+ {
+ /* What type of argument have we got ? */
+ switch(value->type)
+ {
+ case IAS_INTEGER:
+ DEBUG(IRDA_SR_INFO, "result=%d\n", value->t.integer);
+ if(value->t.integer != -1)
+ /* Get the remote TSAP selector */
+ dtsap_sel = value->t.integer;
+ else
+ self->errno = -EADDRNOTAVAIL;
+ break;
+ default:
+ self->errno = -EADDRNOTAVAIL;
+ DERROR(IRDA_SR_ERROR, "bad type ! (0x%X)\n", value->type);
+ break;
+ }
+
+ /* Cleanup */
+ irias_delete_value(value);
+ }
+ else /* value == NULL */
+ {
+ /* Nothing returned to us - usually result != SUCCESS */
+ if(!(self->errno))
+ {
+ DERROR(IRDA_SR_ERROR,
+ "IrDA bug : result == SUCCESS && value == NULL\n");
+ self->errno = -EHOSTUNREACH;
+ }
+ }
+ DEXIT(IRDA_SR_TRACE, "\n");
+
+ /* Return the TSAP */
+ return dtsap_sel;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_find_lsap_sel (self)
+ *
+ * Try to lookup LSAP selector in remote LM-IAS
+ *
+ * Basically, we start a IAP query, and then go to sleep. When the query
+ * return, irnet_getvalue_confirm will wake us up, and we can examine the
+ * result of the query...
+ * Note that in some case, the query fail even before we go to sleep,
+ * creating some races...
+ */
+static inline int
+irnet_find_lsap_sel(irnet_socket * self)
+{
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ /* This should not happen */
+ DABORT(self->iriap, -EBUSY, IRDA_SR_ERROR, "busy with a previous query.\n");
+
+ /* Create an IAP instance, will be closed in irnet_getvalue_confirm() */
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ irnet_getvalue_confirm);
+
+ /* Treat unexpected signals as disconnect */
+ self->errno = -EHOSTUNREACH;
+
+ /* Query remote LM-IAS */
+ iriap_getvaluebyclass_request(self->iriap, self->rsaddr, self->daddr,
+ IRNET_SERVICE_NAME, IRNET_IAS_VALUE);
+
+ /* The above request is non-blocking.
+ * After a while, IrDA will call us back in irnet_getvalue_confirm()
+ * We will then call irnet_ias_to_tsap() and finish the
+ * connection procedure */
+
+ DEXIT(IRDA_SR_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_tsap (self)
+ *
+ * Initialise the TTP socket and initiate TTP connection
+ *
+ */
+static inline int
+irnet_connect_tsap(irnet_socket * self)
+{
+ int err;
+
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ /* Open a local TSAP (an IrTTP instance) */
+ err = irnet_open_tsap(self);
+ if(err != 0)
+ {
+ clear_bit(0, &self->ttp_connect);
+ DERROR(IRDA_SR_ERROR, "connect aborted!\n");
+ return err;
+ }
+
+ /* Connect to remote device */
+ err = irttp_connect_request(self->tsap, self->dtsap_sel,
+ self->rsaddr, self->daddr, NULL,
+ self->max_sdu_size_rx, NULL);
+ if(err != 0)
+ {
+ clear_bit(0, &self->ttp_connect);
+ DERROR(IRDA_SR_ERROR, "connect aborted!\n");
+ return err;
+ }
+
+ /* The above call is non-blocking.
+ * After a while, the IrDA stack will either call us back in
+ * irnet_connect_confirm() or irnet_disconnect_indication()
+ * See you there ;-) */
+
+ DEXIT(IRDA_SR_TRACE, "\n");
+ return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discover_next_daddr (self)
+ *
+ * Query the IrNET TSAP of the next device in the log.
+ *
+ * Used in the TSAP discovery procedure.
+ */
+static inline int
+irnet_discover_next_daddr(irnet_socket * self)
+{
+ /* Close the last instance of IrIAP, and open a new one.
+ * We can't reuse the IrIAP instance in the IrIAP callback */
+ if(self->iriap)
+ {
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+ }
+ /* Create a new IAP instance */
+ self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+ irnet_discovervalue_confirm);
+ if(self->iriap == NULL)
+ return -ENOMEM;
+
+ /* Next discovery - before the call to avoid races */
+ self->disco_index++;
+
+ /* Check if we have one more address to try */
+ if(self->disco_index < self->disco_number)
+ {
+ /* Query remote LM-IAS */
+ iriap_getvaluebyclass_request(self->iriap,
+ self->discoveries[self->disco_index].saddr,
+ self->discoveries[self->disco_index].daddr,
+ IRNET_SERVICE_NAME, IRNET_IAS_VALUE);
+ /* The above request is non-blocking.
+ * After a while, IrDA will call us back in irnet_discovervalue_confirm()
+ * We will then call irnet_ias_to_tsap() and come back here again... */
+ return 0;
+ }
+ else
+ return 1;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discover_daddr_and_lsap_sel (self)
+ *
+ * This try to find a device with the requested service.
+ *
+ * Initiate a TSAP discovery procedure.
+ * It basically look into the discovery log. For each address in the list,
+ * it queries the LM-IAS of the device to find if this device offer
+ * the requested service.
+ * If there is more than one node supporting the service, we complain
+ * to the user (it should move devices around).
+ * If we find one node which have the requested TSAP, we connect to it.
+ *
+ * This function just start the whole procedure. It request the discovery
+ * log and submit the first IAS query.
+ * The bulk of the job is handled in irnet_discovervalue_confirm()
+ *
+ * Note : this procedure fails if there is more than one device in range
+ * on the same dongle, because IrLMP doesn't disconnect the LAP when the
+ * last LSAP is closed. Moreover, we would need to wait the LAP
+ * disconnection...
+ */
+static inline int
+irnet_discover_daddr_and_lsap_sel(irnet_socket * self)
+{
+ int ret;
+
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ /* Ask lmp for the current discovery log */
+ self->discoveries = irlmp_get_discoveries(&self->disco_number, self->mask,
+ DISCOVERY_DEFAULT_SLOTS);
+
+ /* Check if the we got some results */
+ if(self->discoveries == NULL)
+ {
+ self->disco_number = -1;
+ clear_bit(0, &self->ttp_connect);
+ DRETURN(-ENETUNREACH, IRDA_SR_INFO, "No Cachelog...\n");
+ }
+ DEBUG(IRDA_SR_INFO, "Got the log (0x%p), size is %d\n",
+ self->discoveries, self->disco_number);
+
+ /* Start with the first discovery */
+ self->disco_index = -1;
+ self->daddr = DEV_ADDR_ANY;
+
+ /* This will fail if the log is empty - this is non-blocking */
+ ret = irnet_discover_next_daddr(self);
+ if(ret)
+ {
+ /* Close IAP */
+ if(self->iriap)
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+
+ /* Cleanup our copy of the discovery log */
+ kfree(self->discoveries);
+ self->discoveries = NULL;
+
+ clear_bit(0, &self->ttp_connect);
+ DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n");
+ }
+
+ /* Follow me in irnet_discovervalue_confirm() */
+
+ DEXIT(IRDA_SR_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_dname_to_daddr (self)
+ *
+ * Convert an IrDA nickname to a valid IrDA address
+ *
+ * It basically look into the discovery log until there is a match.
+ */
+static inline int
+irnet_dname_to_daddr(irnet_socket * self)
+{
+ struct irda_device_info *discoveries; /* Copy of the discovery log */
+ int number; /* Number of nodes in the log */
+ int i;
+
+ DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+ /* Ask lmp for the current discovery log */
+ discoveries = irlmp_get_discoveries(&number, 0xffff,
+ DISCOVERY_DEFAULT_SLOTS);
+ /* Check if the we got some results */
+ if(discoveries == NULL)
+ DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n");
+
+ /*
+ * Now, check all discovered devices (if any), and connect
+ * client only about the services that the client is
+ * interested in...
+ */
+ for(i = 0; i < number; i++)
+ {
+ /* Does the name match ? */
+ if(!strncmp(discoveries[i].info, self->rname, NICKNAME_MAX_LEN))
+ {
+ /* Yes !!! Get it.. */
+ self->daddr = discoveries[i].daddr;
+ DEBUG(IRDA_SR_INFO, "discovered device ``%s'' at address 0x%08x.\n",
+ self->rname, self->daddr);
+ kfree(discoveries);
+ DEXIT(IRDA_SR_TRACE, "\n");
+ return 0;
+ }
+ }
+ /* No luck ! */
+ DEBUG(IRDA_SR_INFO, "cannot discover device ``%s'' !!!\n", self->rname);
+ kfree(discoveries);
+ return -EADDRNOTAVAIL;
+}
+
+
+/************************* SOCKET ROUTINES *************************/
+/*
+ * This are the main operations on IrNET sockets, basically to create
+ * and destroy IrNET sockets. These are called from the PPP part...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Create a IrNET instance : just initialise some parameters...
+ */
+int
+irda_irnet_create(irnet_socket * self)
+{
+ DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+
+ self->magic = IRNET_MAGIC; /* Paranoia */
+
+ self->ttp_open = 0; /* Prevent higher layer from accessing IrTTP */
+ self->ttp_connect = 0; /* Not connecting yet */
+ self->rname[0] = '\0'; /* May be set via control channel */
+ self->rdaddr = DEV_ADDR_ANY; /* May be set via control channel */
+ self->rsaddr = DEV_ADDR_ANY; /* May be set via control channel */
+ self->daddr = DEV_ADDR_ANY; /* Until we get connected */
+ self->saddr = DEV_ADDR_ANY; /* Until we get connected */
+ self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+
+ /* Register as a client with IrLMP */
+ self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
+#ifdef DISCOVERY_NOMASK
+ self->mask = 0xffff; /* For W2k compatibility */
+#else /* DISCOVERY_NOMASK */
+ self->mask = irlmp_service_to_hint(S_LAN);
+#endif /* DISCOVERY_NOMASK */
+ self->tx_flow = FLOW_START; /* Flow control from IrTTP */
+
+ INIT_WORK(&self->disconnect_work, irnet_ppp_disconnect);
+
+ DEXIT(IRDA_SOCK_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Connect to the other side :
+ * o convert device name to an address
+ * o find the socket number (dlsap)
+ * o Establish the connection
+ *
+ * Note : We no longer mimic af_irda. The IAS query for finding the TSAP
+ * is done asynchronously, like the TTP connection. This allow us to
+ * call this function from any context (not only process).
+ * The downside is that following what's happening in there is tricky
+ * because it involve various functions all over the place...
+ */
+int
+irda_irnet_connect(irnet_socket * self)
+{
+ int err;
+
+ DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+
+ /* Check if we are already trying to connect.
+ * Because irda_irnet_connect() can be called directly by pppd plus
+ * packet retries in ppp_generic and connect may take time, plus we may
+ * race with irnet_connect_indication(), we need to be careful there... */
+ if(test_and_set_bit(0, &self->ttp_connect))
+ DRETURN(-EBUSY, IRDA_SOCK_INFO, "Already connecting...\n");
+ if((self->iriap != NULL) || (self->tsap != NULL))
+ DERROR(IRDA_SOCK_ERROR, "Socket not cleaned up...\n");
+
+ /* Insert ourselves in the hashbin so that the IrNET server can find us.
+ * Notes : 4th arg is string of 32 char max and must be null terminated
+ * When 4th arg is used (string), 3rd arg isn't (int)
+ * Can't re-insert (MUST remove first) so check for that... */
+ if((irnet_server.running) && (self->q.q_next == NULL))
+ {
+ spin_lock_bh(&irnet_server.spinlock);
+ hashbin_insert(irnet_server.list, (irda_queue_t *) self, 0, self->rname);
+ spin_unlock_bh(&irnet_server.spinlock);
+ DEBUG(IRDA_SOCK_INFO, "Inserted ``%s'' in hashbin...\n", self->rname);
+ }
+
+ /* If we don't have anything (no address, no name) */
+ if((self->rdaddr == DEV_ADDR_ANY) && (self->rname[0] == '\0'))
+ {
+ /* Try to find a suitable address */
+ if((err = irnet_discover_daddr_and_lsap_sel(self)) != 0)
+ DRETURN(err, IRDA_SOCK_INFO, "auto-connect failed!\n");
+ /* In most cases, the call above is non-blocking */
+ }
+ else
+ {
+ /* If we have only the name (no address), try to get an address */
+ if(self->rdaddr == DEV_ADDR_ANY)
+ {
+ if((err = irnet_dname_to_daddr(self)) != 0)
+ DRETURN(err, IRDA_SOCK_INFO, "name connect failed!\n");
+ }
+ else
+ /* Use the requested destination address */
+ self->daddr = self->rdaddr;
+
+ /* Query remote LM-IAS to find LSAP selector */
+ irnet_find_lsap_sel(self);
+ /* The above call is non blocking */
+ }
+
+ /* At this point, we are waiting for the IrDA stack to call us back,
+ * or we have already failed.
+ * We will finish the connection procedure in irnet_connect_tsap().
+ */
+ DEXIT(IRDA_SOCK_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_irnet_destroy(self)
+ *
+ * Destroy irnet instance
+ *
+ * Note : this need to be called from a process context.
+ */
+void
+irda_irnet_destroy(irnet_socket * self)
+{
+ DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+ if(self == NULL)
+ return;
+
+ /* Remove ourselves from hashbin (if we are queued in hashbin)
+ * Note : `irnet_server.running' protect us from calls in hashbin_delete() */
+ if((irnet_server.running) && (self->q.q_next != NULL))
+ {
+ struct irnet_socket * entry;
+ DEBUG(IRDA_SOCK_INFO, "Removing from hash..\n");
+ spin_lock_bh(&irnet_server.spinlock);
+ entry = hashbin_remove_this(irnet_server.list, (irda_queue_t *) self);
+ self->q.q_next = NULL;
+ spin_unlock_bh(&irnet_server.spinlock);
+ DASSERT(entry == self, , IRDA_SOCK_ERROR, "Can't remove from hash.\n");
+ }
+
+ /* If we were connected, post a message */
+ if(test_bit(0, &self->ttp_open))
+ {
+ /* Note : as the disconnect comes from ppp_generic, the unit number
+ * doesn't exist anymore when we post the event, so we need to pass
+ * NULL as the first arg... */
+ irnet_post_event(NULL, IRNET_DISCONNECT_TO,
+ self->saddr, self->daddr, self->rname, 0);
+ }
+
+ /* Prevent various IrDA callbacks from messing up things
+ * Need to be first */
+ clear_bit(0, &self->ttp_connect);
+
+ /* Prevent higher layer from accessing IrTTP */
+ clear_bit(0, &self->ttp_open);
+
+ /* Unregister with IrLMP */
+ irlmp_unregister_client(self->ckey);
+
+ /* Unregister with LM-IAS */
+ if(self->iriap)
+ {
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+ }
+
+ /* Cleanup eventual discoveries from connection attempt or control channel */
+ if(self->discoveries != NULL)
+ {
+ /* Cleanup our copy of the discovery log */
+ kfree(self->discoveries);
+ self->discoveries = NULL;
+ }
+
+ /* Close our IrTTP connection */
+ if(self->tsap)
+ {
+ DEBUG(IRDA_SOCK_INFO, "Closing our TTP connection.\n");
+ irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+ self->stsap_sel = 0;
+
+ DEXIT(IRDA_SOCK_TRACE, "\n");
+}
+
+
+/************************** SERVER SOCKET **************************/
+/*
+ * The IrNET service is composed of one server socket and a variable
+ * number of regular IrNET sockets. The server socket is supposed to
+ * handle incoming connections and redirect them to one IrNET sockets.
+ * It's a superset of the regular IrNET socket, but has a very distinct
+ * behaviour...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_daddr_to_dname (self)
+ *
+ * Convert an IrDA address to a IrDA nickname
+ *
+ * It basically look into the discovery log until there is a match.
+ */
+static inline int
+irnet_daddr_to_dname(irnet_socket * self)
+{
+ struct irda_device_info *discoveries; /* Copy of the discovery log */
+ int number; /* Number of nodes in the log */
+ int i;
+
+ DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+ /* Ask lmp for the current discovery log */
+ discoveries = irlmp_get_discoveries(&number, 0xffff,
+ DISCOVERY_DEFAULT_SLOTS);
+ /* Check if the we got some results */
+ if (discoveries == NULL)
+ DRETURN(-ENETUNREACH, IRDA_SERV_INFO, "Cachelog empty...\n");
+
+ /* Now, check all discovered devices (if any) */
+ for(i = 0; i < number; i++)
+ {
+ /* Does the name match ? */
+ if(discoveries[i].daddr == self->daddr)
+ {
+ /* Yes !!! Get it.. */
+ strlcpy(self->rname, discoveries[i].info, sizeof(self->rname));
+ self->rname[sizeof(self->rname) - 1] = '\0';
+ DEBUG(IRDA_SERV_INFO, "Device 0x%08x is in fact ``%s''.\n",
+ self->daddr, self->rname);
+ kfree(discoveries);
+ DEXIT(IRDA_SERV_TRACE, "\n");
+ return 0;
+ }
+ }
+ /* No luck ! */
+ DEXIT(IRDA_SERV_INFO, ": cannot discover device 0x%08x !!!\n", self->daddr);
+ kfree(discoveries);
+ return -EADDRNOTAVAIL;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_find_socket (self)
+ *
+ * Find the correct IrNET socket
+ *
+ * Look into the list of IrNET sockets and finds one with the right
+ * properties...
+ */
+static inline irnet_socket *
+irnet_find_socket(irnet_socket * self)
+{
+ irnet_socket * new = (irnet_socket *) NULL;
+ int err;
+
+ DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+ /* Get the addresses of the requester */
+ self->daddr = irttp_get_daddr(self->tsap);
+ self->saddr = irttp_get_saddr(self->tsap);
+
+ /* Try to get the IrDA nickname of the requester */
+ err = irnet_daddr_to_dname(self);
+
+ /* Protect access to the instance list */
+ spin_lock_bh(&irnet_server.spinlock);
+
+ /* So now, try to get an socket having specifically
+ * requested that nickname */
+ if(err == 0)
+ {
+ new = (irnet_socket *) hashbin_find(irnet_server.list,
+ 0, self->rname);
+ if(new)
+ DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches rname ``%s''.\n",
+ new, new->rname);
+ }
+
+ /* If no name matches, try to find an socket by the destination address */
+ /* It can be either the requested destination address (set via the
+ * control channel), or the current destination address if the
+ * socket is in the middle of a connection request */
+ if(new == (irnet_socket *) NULL)
+ {
+ new = (irnet_socket *) hashbin_get_first(irnet_server.list);
+ while(new !=(irnet_socket *) NULL)
+ {
+ /* Does it have the same address ? */
+ if((new->rdaddr == self->daddr) || (new->daddr == self->daddr))
+ {
+ /* Yes !!! Get it.. */
+ DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches daddr %#08x.\n",
+ new, self->daddr);
+ break;
+ }
+ new = (irnet_socket *) hashbin_get_next(irnet_server.list);
+ }
+ }
+
+ /* If we don't have any socket, get the first unconnected socket */
+ if(new == (irnet_socket *) NULL)
+ {
+ new = (irnet_socket *) hashbin_get_first(irnet_server.list);
+ while(new !=(irnet_socket *) NULL)
+ {
+ /* Is it available ? */
+ if(!(test_bit(0, &new->ttp_open)) && (new->rdaddr == DEV_ADDR_ANY) &&
+ (new->rname[0] == '\0') && (new->ppp_open))
+ {
+ /* Yes !!! Get it.. */
+ DEBUG(IRDA_SERV_INFO, "Socket 0x%p is free.\n",
+ new);
+ break;
+ }
+ new = (irnet_socket *) hashbin_get_next(irnet_server.list);
+ }
+ }
+
+ /* Spin lock end */
+ spin_unlock_bh(&irnet_server.spinlock);
+
+ DEXIT(IRDA_SERV_TRACE, " - new = 0x%p\n", new);
+ return new;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_connect_socket (self)
+ *
+ * Connect an incoming connection to the socket
+ *
+ */
+static inline int
+irnet_connect_socket(irnet_socket * server,
+ irnet_socket * new,
+ struct qos_info * qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size)
+{
+ DENTER(IRDA_SERV_TRACE, "(server=0x%p, new=0x%p)\n",
+ server, new);
+
+ /* Now attach up the new socket */
+ new->tsap = irttp_dup(server->tsap, new);
+ DABORT(new->tsap == NULL, -1, IRDA_SERV_ERROR, "dup failed!\n");
+
+ /* Set up all the relevant parameters on the new socket */
+ new->stsap_sel = new->tsap->stsap_sel;
+ new->dtsap_sel = new->tsap->dtsap_sel;
+ new->saddr = irttp_get_saddr(new->tsap);
+ new->daddr = irttp_get_daddr(new->tsap);
+
+ new->max_header_size = max_header_size;
+ new->max_sdu_size_tx = max_sdu_size;
+ new->max_data_size = max_sdu_size;
+#ifdef STREAM_COMPAT
+ /* If we want to receive "stream sockets" */
+ if(max_sdu_size == 0)
+ new->max_data_size = irttp_get_max_seg_size(new->tsap);
+#endif /* STREAM_COMPAT */
+
+ /* Clean up the original one to keep it in listen state */
+ irttp_listen(server->tsap);
+
+ /* Send a connection response on the new socket */
+ irttp_connect_response(new->tsap, new->max_sdu_size_rx, NULL);
+
+ /* Allow PPP to send its junk over the new socket... */
+ set_bit(0, &new->ttp_open);
+
+ /* Not connecting anymore, and clean up last possible remains
+ * of connection attempts on the socket */
+ clear_bit(0, &new->ttp_connect);
+ if(new->iriap)
+ {
+ iriap_close(new->iriap);
+ new->iriap = NULL;
+ }
+ if(new->discoveries != NULL)
+ {
+ kfree(new->discoveries);
+ new->discoveries = NULL;
+ }
+
+#ifdef CONNECT_INDIC_KICK
+ /* As currently we don't block packets in ppp_irnet_send() while passive,
+ * this is not really needed...
+ * Also, not doing it give IrDA a chance to finish the setup properly
+ * before being swamped with packets... */
+ ppp_output_wakeup(&new->chan);
+#endif /* CONNECT_INDIC_KICK */
+
+ /* Notify the control channel */
+ irnet_post_event(new, IRNET_CONNECT_FROM,
+ new->saddr, new->daddr, server->rname, 0);
+
+ DEXIT(IRDA_SERV_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_disconnect_server (self)
+ *
+ * Cleanup the server socket when the incoming connection abort
+ *
+ */
+static inline void
+irnet_disconnect_server(irnet_socket * self,
+ struct sk_buff *skb)
+{
+ DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+ /* Put the received packet in the black hole */
+ kfree_skb(skb);
+
+#ifdef FAIL_SEND_DISCONNECT
+ /* Tell the other party we don't want to be connected */
+ /* Hum... Is it the right thing to do ? And do we need to send
+ * a connect response before ? It looks ok without this... */
+ irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+#endif /* FAIL_SEND_DISCONNECT */
+
+ /* Notify the control channel (see irnet_find_socket()) */
+ irnet_post_event(NULL, IRNET_REQUEST_FROM,
+ self->saddr, self->daddr, self->rname, 0);
+
+ /* Clean up the server to keep it in listen state */
+ irttp_listen(self->tsap);
+
+ DEXIT(IRDA_SERV_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_setup_server (self)
+ *
+ * Create a IrTTP server and set it up...
+ *
+ * Register the IrLAN hint bit, create a IrTTP instance for us,
+ * set all the IrTTP callbacks and create an IrIAS entry...
+ */
+static inline int
+irnet_setup_server(void)
+{
+ __u16 hints;
+
+ DENTER(IRDA_SERV_TRACE, "()\n");
+
+ /* Initialise the regular socket part of the server */
+ irda_irnet_create(&irnet_server.s);
+
+ /* Open a local TSAP (an IrTTP instance) for the server */
+ irnet_open_tsap(&irnet_server.s);
+
+ /* PPP part setup */
+ irnet_server.s.ppp_open = 0;
+ irnet_server.s.chan.private = NULL;
+ irnet_server.s.file = NULL;
+
+ /* Get the hint bit corresponding to IrLAN */
+ /* Note : we overload the IrLAN hint bit. As it is only a "hint", and as
+ * we provide roughly the same functionality as IrLAN, this is ok.
+ * In fact, the situation is similar as JetSend overloading the Obex hint
+ */
+ hints = irlmp_service_to_hint(S_LAN);
+
+#ifdef ADVERTISE_HINT
+ /* Register with IrLMP as a service (advertise our hint bit) */
+ irnet_server.skey = irlmp_register_service(hints);
+#endif /* ADVERTISE_HINT */
+
+ /* Register with LM-IAS (so that people can connect to us) */
+ irnet_server.ias_obj = irias_new_object(IRNET_SERVICE_NAME, jiffies);
+ irias_add_integer_attrib(irnet_server.ias_obj, IRNET_IAS_VALUE,
+ irnet_server.s.stsap_sel, IAS_KERNEL_ATTR);
+ irias_insert_object(irnet_server.ias_obj);
+
+#ifdef DISCOVERY_EVENTS
+ /* Tell IrLMP we want to be notified of newly discovered nodes */
+ irlmp_update_client(irnet_server.s.ckey, hints,
+ irnet_discovery_indication, irnet_expiry_indication,
+ (void *) &irnet_server.s);
+#endif
+
+ DEXIT(IRDA_SERV_TRACE, " - self=0x%p\n", &irnet_server.s);
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_destroy_server (self)
+ *
+ * Destroy the IrTTP server...
+ *
+ * Reverse of the previous function...
+ */
+static inline void
+irnet_destroy_server(void)
+{
+ DENTER(IRDA_SERV_TRACE, "()\n");
+
+#ifdef ADVERTISE_HINT
+ /* Unregister with IrLMP */
+ irlmp_unregister_service(irnet_server.skey);
+#endif /* ADVERTISE_HINT */
+
+ /* Unregister with LM-IAS */
+ if(irnet_server.ias_obj)
+ irias_delete_object(irnet_server.ias_obj);
+
+ /* Cleanup the socket part */
+ irda_irnet_destroy(&irnet_server.s);
+
+ DEXIT(IRDA_SERV_TRACE, "\n");
+}
+
+
+/************************ IRDA-TTP CALLBACKS ************************/
+/*
+ * When we create a IrTTP instance, we pass to it a set of callbacks
+ * that IrTTP will call in case of various events.
+ * We take care of those events here.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_data_indication (instance, sap, skb)
+ *
+ * Received some data from TinyTP. Just queue it on the receive queue
+ *
+ */
+static int
+irnet_data_indication(void * instance,
+ void * sap,
+ struct sk_buff *skb)
+{
+ irnet_socket * ap = (irnet_socket *) instance;
+ unsigned char * p;
+ int code = 0;
+
+ DENTER(IRDA_TCB_TRACE, "(self/ap=0x%p, skb=0x%p)\n",
+ ap, skb);
+ DASSERT(skb != NULL, 0, IRDA_CB_ERROR, "skb is NULL !!!\n");
+
+ /* Check is ppp is ready to receive our packet */
+ if(!ap->ppp_open)
+ {
+ DERROR(IRDA_CB_ERROR, "PPP not ready, dropping packet...\n");
+ /* When we return error, TTP will need to requeue the skb and
+ * will stop the sender. IrTTP will stall until we send it a
+ * flow control request... */
+ return -ENOMEM;
+ }
+
+ /* strip address/control field if present */
+ p = skb->data;
+ if((p[0] == PPP_ALLSTATIONS) && (p[1] == PPP_UI))
+ {
+ /* chop off address/control */
+ if(skb->len < 3)
+ goto err_exit;
+ p = skb_pull(skb, 2);
+ }
+
+ /* decompress protocol field if compressed */
+ if(p[0] & 1)
+ {
+ /* protocol is compressed */
+ skb_push(skb, 1)[0] = 0;
+ }
+ else
+ if(skb->len < 2)
+ goto err_exit;
+
+ /* pass to generic ppp layer */
+ /* Note : how do I know if ppp can accept or not the packet ? This is
+ * essential if I want to manage flow control smoothly... */
+ ppp_input(&ap->chan, skb);
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+ return 0;
+
+ err_exit:
+ DERROR(IRDA_CB_ERROR, "Packet too small, dropping...\n");
+ kfree_skb(skb);
+ ppp_input_error(&ap->chan, code);
+ return 0; /* Don't return an error code, only for flow control... */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_disconnect_indication (instance, sap, reason, skb)
+ *
+ * Connection has been closed. Chech reason to find out why
+ *
+ * Note : there are many cases where we come here :
+ * o attempted to connect, timeout
+ * o connected, link is broken, LAP has timeout
+ * o connected, other side close the link
+ * o connection request on the server not handled
+ */
+static void
+irnet_disconnect_indication(void * instance,
+ void * sap,
+ LM_REASON reason,
+ struct sk_buff *skb)
+{
+ irnet_socket * self = (irnet_socket *) instance;
+ int test_open;
+ int test_connect;
+
+ DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n");
+
+ /* Don't care about it, but let's not leak it */
+ if(skb)
+ dev_kfree_skb(skb);
+
+ /* Prevent higher layer from accessing IrTTP */
+ test_open = test_and_clear_bit(0, &self->ttp_open);
+ /* Not connecting anymore...
+ * (note : TSAP is open, so IAP callbacks are no longer pending...) */
+ test_connect = test_and_clear_bit(0, &self->ttp_connect);
+
+ /* If both self->ttp_open and self->ttp_connect are NULL, it mean that we
+ * have a race condition with irda_irnet_destroy() or
+ * irnet_connect_indication(), so don't mess up tsap...
+ */
+ if(!(test_open || test_connect))
+ {
+ DERROR(IRDA_CB_ERROR, "Race condition detected...\n");
+ return;
+ }
+
+ /* If we were active, notify the control channel */
+ if(test_open)
+ irnet_post_event(self, IRNET_DISCONNECT_FROM,
+ self->saddr, self->daddr, self->rname, 0);
+ else
+ /* If we were trying to connect, notify the control channel */
+ if((self->tsap) && (self != &irnet_server.s))
+ irnet_post_event(self, IRNET_NOANSWER_FROM,
+ self->saddr, self->daddr, self->rname, 0);
+
+ /* Close our IrTTP connection, cleanup tsap */
+ if((self->tsap) && (self != &irnet_server.s))
+ {
+ DEBUG(IRDA_CB_INFO, "Closing our TTP connection.\n");
+ irttp_close_tsap(self->tsap);
+ self->tsap = NULL;
+ }
+ /* Cleanup the socket in case we want to reconnect in ppp_output_wakeup() */
+ self->stsap_sel = 0;
+ self->daddr = DEV_ADDR_ANY;
+ self->tx_flow = FLOW_START;
+
+ /* Deal with the ppp instance if it's still alive */
+ if(self->ppp_open)
+ {
+ if(test_open)
+ {
+ /* ppp_unregister_channel() wants a user context. */
+ schedule_work(&self->disconnect_work);
+ }
+ else
+ {
+ /* If we were trying to connect, flush (drain) ppp_generic
+ * Tx queue (most often we have blocked it), which will
+ * trigger an other attempt to connect. If we are passive,
+ * this will empty the Tx queue after last try. */
+ ppp_output_wakeup(&self->chan);
+ }
+ }
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ * Connections has been confirmed by the remote device
+ *
+ */
+static void
+irnet_connect_confirm(void * instance,
+ void * sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ irnet_socket * self = (irnet_socket *) instance;
+
+ DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+
+ /* Check if socket is closing down (via irda_irnet_destroy()) */
+ if(! test_bit(0, &self->ttp_connect))
+ {
+ DERROR(IRDA_CB_ERROR, "Socket no longer connecting. Ouch !\n");
+ return;
+ }
+
+ /* How much header space do we need to reserve */
+ self->max_header_size = max_header_size;
+
+ /* IrTTP max SDU size in transmit direction */
+ self->max_sdu_size_tx = max_sdu_size;
+ self->max_data_size = max_sdu_size;
+#ifdef STREAM_COMPAT
+ if(max_sdu_size == 0)
+ self->max_data_size = irttp_get_max_seg_size(self->tsap);
+#endif /* STREAM_COMPAT */
+
+ /* At this point, IrLMP has assigned our source address */
+ self->saddr = irttp_get_saddr(self->tsap);
+
+ /* Allow higher layer to access IrTTP */
+ set_bit(0, &self->ttp_open);
+ clear_bit(0, &self->ttp_connect); /* Not racy, IrDA traffic is serial */
+ /* Give a kick in the ass of ppp_generic so that he sends us some data */
+ ppp_output_wakeup(&self->chan);
+
+ /* Check size of received packet */
+ if(skb->len > 0)
+ {
+#ifdef PASS_CONNECT_PACKETS
+ DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n");
+ /* Try to pass it to PPP */
+ irnet_data_indication(instance, sap, skb);
+#else /* PASS_CONNECT_PACKETS */
+ DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n");
+ kfree_skb(skb); /* Note : will be optimised with other kfree... */
+#endif /* PASS_CONNECT_PACKETS */
+ }
+ else
+ kfree_skb(skb);
+
+ /* Notify the control channel */
+ irnet_post_event(self, IRNET_CONNECT_TO,
+ self->saddr, self->daddr, self->rname, 0);
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_flow_indication (instance, sap, flow)
+ *
+ * Used by TinyTP to tell us if it can accept more data or not
+ *
+ */
+static void
+irnet_flow_indication(void * instance,
+ void * sap,
+ LOCAL_FLOW flow)
+{
+ irnet_socket * self = (irnet_socket *) instance;
+ LOCAL_FLOW oldflow = self->tx_flow;
+
+ DENTER(IRDA_TCB_TRACE, "(self=0x%p, flow=%d)\n", self, flow);
+
+ /* Update our state */
+ self->tx_flow = flow;
+
+ /* Check what IrTTP want us to do... */
+ switch(flow)
+ {
+ case FLOW_START:
+ DEBUG(IRDA_CB_INFO, "IrTTP wants us to start again\n");
+ /* Check if we really need to wake up PPP */
+ if(oldflow == FLOW_STOP)
+ ppp_output_wakeup(&self->chan);
+ else
+ DEBUG(IRDA_CB_INFO, "But we were already transmitting !!!\n");
+ break;
+ case FLOW_STOP:
+ DEBUG(IRDA_CB_INFO, "IrTTP wants us to slow down\n");
+ break;
+ default:
+ DEBUG(IRDA_CB_INFO, "Unknown flow command!\n");
+ break;
+ }
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_status_indication (instance, sap, reason, skb)
+ *
+ * Link (IrLAP) status report.
+ *
+ */
+static void
+irnet_status_indication(void * instance,
+ LINK_STATUS link,
+ LOCK_STATUS lock)
+{
+ irnet_socket * self = (irnet_socket *) instance;
+
+ DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n");
+
+ /* We can only get this event if we are connected */
+ switch(link)
+ {
+ case STATUS_NO_ACTIVITY:
+ irnet_post_event(self, IRNET_BLOCKED_LINK,
+ self->saddr, self->daddr, self->rname, 0);
+ break;
+ default:
+ DEBUG(IRDA_CB_INFO, "Unknown status...\n");
+ }
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_indication(instance, sap, qos, max_sdu_size, userdata)
+ *
+ * Incoming connection
+ *
+ * In theory, this function is called only on the server socket.
+ * Some other node is attempting to connect to the IrNET service, and has
+ * sent a connection request on our server socket.
+ * We just redirect the connection to the relevant IrNET socket.
+ *
+ * Note : we also make sure that between 2 irnet nodes, there can
+ * exist only one irnet connection.
+ */
+static void
+irnet_connect_indication(void * instance,
+ void * sap,
+ struct qos_info *qos,
+ __u32 max_sdu_size,
+ __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ irnet_socket * server = &irnet_server.s;
+ irnet_socket * new = (irnet_socket *) NULL;
+
+ DENTER(IRDA_TCB_TRACE, "(server=0x%p)\n", server);
+ DASSERT(instance == &irnet_server, , IRDA_CB_ERROR,
+ "Invalid instance (0x%p) !!!\n", instance);
+ DASSERT(sap == irnet_server.s.tsap, , IRDA_CB_ERROR, "Invalid sap !!!\n");
+
+ /* Try to find the most appropriate IrNET socket */
+ new = irnet_find_socket(server);
+
+ /* After all this hard work, do we have an socket ? */
+ if(new == (irnet_socket *) NULL)
+ {
+ DEXIT(IRDA_CB_INFO, ": No socket waiting for this connection.\n");
+ irnet_disconnect_server(server, skb);
+ return;
+ }
+
+ /* Is the socket already busy ? */
+ if(test_bit(0, &new->ttp_open))
+ {
+ DEXIT(IRDA_CB_INFO, ": Socket already connected.\n");
+ irnet_disconnect_server(server, skb);
+ return;
+ }
+
+ /* The following code is a bit tricky, so need comments ;-)
+ */
+ /* If ttp_connect is set, the socket is trying to connect to the other
+ * end and may have sent a IrTTP connection request and is waiting for
+ * a connection response (that may never come).
+ * Now, the pain is that the socket may have opened a tsap and is
+ * waiting on it, while the other end is trying to connect to it on
+ * another tsap.
+ * Because IrNET can be peer to peer, we need to workaround this.
+ * Furthermore, the way the irnetd script is implemented, the
+ * target will create a second IrNET connection back to the
+ * originator and expect the originator to bind this new connection
+ * to the original PPPD instance.
+ * And of course, if we don't use irnetd, we can have a race when
+ * both side try to connect simultaneously, which could leave both
+ * connections half closed (yuck).
+ * Conclusions :
+ * 1) The "originator" must accept the new connection and get rid
+ * of the old one so that irnetd works
+ * 2) One side must deny the new connection to avoid races,
+ * but both side must agree on which side it is...
+ * Most often, the originator is primary at the LAP layer.
+ * Jean II
+ */
+ /* Now, let's look at the way I wrote the test...
+ * We need to clear up the ttp_connect flag atomically to prevent
+ * irnet_disconnect_indication() to mess up the tsap we are going to close.
+ * We want to clear the ttp_connect flag only if we close the tsap,
+ * otherwise we will never close it, so we need to check for primary
+ * *before* doing the test on the flag.
+ * And of course, ALLOW_SIMULT_CONNECT can disable this entirely...
+ * Jean II
+ */
+
+ /* Socket already connecting ? On primary ? */
+ if(0
+#ifdef ALLOW_SIMULT_CONNECT
+ || ((irttp_is_primary(server->tsap) == 1) && /* primary */
+ (test_and_clear_bit(0, &new->ttp_connect)))
+#endif /* ALLOW_SIMULT_CONNECT */
+ )
+ {
+ DERROR(IRDA_CB_ERROR, "Socket already connecting, but going to reuse it !\n");
+
+ /* Cleanup the old TSAP if necessary - IrIAP will be cleaned up later */
+ if(new->tsap != NULL)
+ {
+ /* Close the old connection the new socket was attempting,
+ * so that we can hook it up to the new connection.
+ * It's now safe to do it... */
+ irttp_close_tsap(new->tsap);
+ new->tsap = NULL;
+ }
+ }
+ else
+ {
+ /* Three options :
+ * 1) socket was not connecting or connected : ttp_connect should be 0.
+ * 2) we don't want to connect the socket because we are secondary or
+ * ALLOW_SIMULT_CONNECT is undefined. ttp_connect should be 1.
+ * 3) we are half way in irnet_disconnect_indication(), and it's a
+ * nice race condition... Fortunately, we can detect that by checking
+ * if tsap is still alive. On the other hand, we can't be in
+ * irda_irnet_destroy() otherwise we would not have found this
+ * socket in the hashbin.
+ * Jean II */
+ if((test_bit(0, &new->ttp_connect)) || (new->tsap != NULL))
+ {
+ /* Don't mess this socket, somebody else in in charge... */
+ DERROR(IRDA_CB_ERROR, "Race condition detected, socket in use, abort connect...\n");
+ irnet_disconnect_server(server, skb);
+ return;
+ }
+ }
+
+ /* So : at this point, we have a socket, and it is idle. Good ! */
+ irnet_connect_socket(server, new, qos, max_sdu_size, max_header_size);
+
+ /* Check size of received packet */
+ if(skb->len > 0)
+ {
+#ifdef PASS_CONNECT_PACKETS
+ DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n");
+ /* Try to pass it to PPP */
+ irnet_data_indication(new, new->tsap, skb);
+#else /* PASS_CONNECT_PACKETS */
+ DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n");
+ kfree_skb(skb); /* Note : will be optimised with other kfree... */
+#endif /* PASS_CONNECT_PACKETS */
+ }
+ else
+ kfree_skb(skb);
+
+ DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+
+/********************** IRDA-IAS/LMP CALLBACKS **********************/
+/*
+ * These are the callbacks called by other layers of the IrDA stack,
+ * mainly LMP for discovery and IAS for name queries.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_getvalue_confirm (result, obj_id, value, priv)
+ *
+ * Got answer from remote LM-IAS, just connect
+ *
+ * This is the reply to a IAS query we were doing to find the TSAP of
+ * the device we want to connect to.
+ * If we have found a valid TSAP, just initiate the TTP connection
+ * on this TSAP.
+ */
+static void
+irnet_getvalue_confirm(int result,
+ __u16 obj_id,
+ struct ias_value *value,
+ void * priv)
+{
+ irnet_socket * self = (irnet_socket *) priv;
+
+ DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n");
+
+ /* Check if already connected (via irnet_connect_socket())
+ * or socket is closing down (via irda_irnet_destroy()) */
+ if(! test_bit(0, &self->ttp_connect))
+ {
+ DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n");
+ return;
+ }
+
+ /* We probably don't need to make any more queries */
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+
+ /* Post process the IAS reply */
+ self->dtsap_sel = irnet_ias_to_tsap(self, result, value);
+
+ /* If error, just go out */
+ if(self->errno)
+ {
+ clear_bit(0, &self->ttp_connect);
+ DERROR(IRDA_OCB_ERROR, "IAS connect failed ! (0x%X)\n", self->errno);
+ return;
+ }
+
+ DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n",
+ self->daddr, self->dtsap_sel);
+
+ /* Start up TTP - non blocking */
+ irnet_connect_tsap(self);
+
+ DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discovervalue_confirm (result, obj_id, value, priv)
+ *
+ * Handle the TSAP discovery procedure state machine.
+ * Got answer from remote LM-IAS, try next device
+ *
+ * We are doing a TSAP discovery procedure, and we got an answer to
+ * a IAS query we were doing to find the TSAP on one of the address
+ * in the discovery log.
+ *
+ * If we have found a valid TSAP for the first time, save it. If it's
+ * not the first time we found one, complain.
+ *
+ * If we have more addresses in the log, just initiate a new query.
+ * Note that those query may fail (see irnet_discover_daddr_and_lsap_sel())
+ *
+ * Otherwise, wrap up the procedure (cleanup), check if we have found
+ * any device and connect to it.
+ */
+static void
+irnet_discovervalue_confirm(int result,
+ __u16 obj_id,
+ struct ias_value *value,
+ void * priv)
+{
+ irnet_socket * self = (irnet_socket *) priv;
+ __u8 dtsap_sel; /* TSAP we are looking for */
+
+ DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n");
+
+ /* Check if already connected (via irnet_connect_socket())
+ * or socket is closing down (via irda_irnet_destroy()) */
+ if(! test_bit(0, &self->ttp_connect))
+ {
+ DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n");
+ return;
+ }
+
+ /* Post process the IAS reply */
+ dtsap_sel = irnet_ias_to_tsap(self, result, value);
+
+ /* Have we got something ? */
+ if(self->errno == 0)
+ {
+ /* We found the requested service */
+ if(self->daddr != DEV_ADDR_ANY)
+ {
+ DERROR(IRDA_OCB_ERROR, "More than one device in range supports IrNET...\n");
+ }
+ else
+ {
+ /* First time we found that one, save it ! */
+ self->daddr = self->discoveries[self->disco_index].daddr;
+ self->dtsap_sel = dtsap_sel;
+ }
+ }
+
+ /* If no failure */
+ if((self->errno == -EADDRNOTAVAIL) || (self->errno == 0))
+ {
+ int ret;
+
+ /* Search the next node */
+ ret = irnet_discover_next_daddr(self);
+ if(!ret)
+ {
+ /* In this case, the above request was non-blocking.
+ * We will return here after a while... */
+ return;
+ }
+ /* In this case, we have processed the last discovery item */
+ }
+
+ /* No more queries to be done (failure or last one) */
+
+ /* We probably don't need to make any more queries */
+ iriap_close(self->iriap);
+ self->iriap = NULL;
+
+ /* No more items : remove the log and signal termination */
+ DEBUG(IRDA_OCB_INFO, "Cleaning up log (0x%p)\n",
+ self->discoveries);
+ if(self->discoveries != NULL)
+ {
+ /* Cleanup our copy of the discovery log */
+ kfree(self->discoveries);
+ self->discoveries = NULL;
+ }
+ self->disco_number = -1;
+
+ /* Check out what we found */
+ if(self->daddr == DEV_ADDR_ANY)
+ {
+ self->daddr = DEV_ADDR_ANY;
+ clear_bit(0, &self->ttp_connect);
+ DEXIT(IRDA_OCB_TRACE, ": cannot discover IrNET in any device !!!\n");
+ return;
+ }
+
+ /* We have a valid address - just connect */
+
+ DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n",
+ self->daddr, self->dtsap_sel);
+
+ /* Start up TTP - non blocking */
+ irnet_connect_tsap(self);
+
+ DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+#ifdef DISCOVERY_EVENTS
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discovery_indication (discovery)
+ *
+ * Got a discovery indication from IrLMP, post an event
+ *
+ * Note : IrLMP take care of matching the hint mask for us, and also
+ * check if it is a "new" node for us...
+ *
+ * As IrLMP filter on the IrLAN hint bit, we get both IrLAN and IrNET
+ * nodes, so it's only at connection time that we will know if the
+ * node support IrNET, IrLAN or both. The other solution is to check
+ * in IAS the PNP ids and service name.
+ * Note : even if a node support IrNET (or IrLAN), it's no guarantee
+ * that we will be able to connect to it, the node might already be
+ * busy...
+ *
+ * One last thing : in some case, this function will trigger duplicate
+ * discovery events. On the other hand, we should catch all
+ * discoveries properly (i.e. not miss one). Filtering duplicate here
+ * is to messy, so we leave that to user space...
+ */
+static void
+irnet_discovery_indication(discinfo_t * discovery,
+ DISCOVERY_MODE mode,
+ void * priv)
+{
+ irnet_socket * self = &irnet_server.s;
+
+ DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR,
+ "Invalid instance (0x%p) !!!\n", priv);
+
+ DEBUG(IRDA_OCB_INFO, "Discovered new IrNET/IrLAN node %s...\n",
+ discovery->info);
+
+ /* Notify the control channel */
+ irnet_post_event(NULL, IRNET_DISCOVER,
+ discovery->saddr, discovery->daddr, discovery->info,
+ get_unaligned((__u16 *)discovery->hints));
+
+ DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_expiry_indication (expiry)
+ *
+ * Got a expiry indication from IrLMP, post an event
+ *
+ * Note : IrLMP take care of matching the hint mask for us, we only
+ * check if it is a "new" node...
+ */
+static void
+irnet_expiry_indication(discinfo_t * expiry,
+ DISCOVERY_MODE mode,
+ void * priv)
+{
+ irnet_socket * self = &irnet_server.s;
+
+ DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+ DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR,
+ "Invalid instance (0x%p) !!!\n", priv);
+
+ DEBUG(IRDA_OCB_INFO, "IrNET/IrLAN node %s expired...\n",
+ expiry->info);
+
+ /* Notify the control channel */
+ irnet_post_event(NULL, IRNET_EXPIRE,
+ expiry->saddr, expiry->daddr, expiry->info,
+ get_unaligned((__u16 *)expiry->hints));
+
+ DEXIT(IRDA_OCB_TRACE, "\n");
+}
+#endif /* DISCOVERY_EVENTS */
+
+
+/*********************** PROC ENTRY CALLBACKS ***********************/
+/*
+ * We create a instance in the /proc filesystem, and here we take care
+ * of that...
+ */
+
+#ifdef CONFIG_PROC_FS
+static int
+irnet_proc_show(struct seq_file *m, void *v)
+{
+ irnet_socket * self;
+ char * state;
+ int i = 0;
+
+ /* Get the IrNET server information... */
+ seq_printf(m, "IrNET server - ");
+ seq_printf(m, "IrDA state: %s, ",
+ (irnet_server.running ? "running" : "dead"));
+ seq_printf(m, "stsap_sel: %02x, ", irnet_server.s.stsap_sel);
+ seq_printf(m, "dtsap_sel: %02x\n", irnet_server.s.dtsap_sel);
+
+ /* Do we need to continue ? */
+ if(!irnet_server.running)
+ return 0;
+
+ /* Protect access to the instance list */
+ spin_lock_bh(&irnet_server.spinlock);
+
+ /* Get the sockets one by one... */
+ self = (irnet_socket *) hashbin_get_first(irnet_server.list);
+ while(self != NULL)
+ {
+ /* Start printing info about the socket. */
+ seq_printf(m, "\nIrNET socket %d - ", i++);
+
+ /* First, get the requested configuration */
+ seq_printf(m, "Requested IrDA name: \"%s\", ", self->rname);
+ seq_printf(m, "daddr: %08x, ", self->rdaddr);
+ seq_printf(m, "saddr: %08x\n", self->rsaddr);
+
+ /* Second, get all the PPP info */
+ seq_printf(m, " PPP state: %s",
+ (self->ppp_open ? "registered" : "unregistered"));
+ if(self->ppp_open)
+ {
+ seq_printf(m, ", unit: ppp%d",
+ ppp_unit_number(&self->chan));
+ seq_printf(m, ", channel: %d",
+ ppp_channel_index(&self->chan));
+ seq_printf(m, ", mru: %d",
+ self->mru);
+ /* Maybe add self->flags ? Later... */
+ }
+
+ /* Then, get all the IrDA specific info... */
+ if(self->ttp_open)
+ state = "connected";
+ else
+ if(self->tsap != NULL)
+ state = "connecting";
+ else
+ if(self->iriap != NULL)
+ state = "searching";
+ else
+ if(self->ttp_connect)
+ state = "weird";
+ else
+ state = "idle";
+ seq_printf(m, "\n IrDA state: %s, ", state);
+ seq_printf(m, "daddr: %08x, ", self->daddr);
+ seq_printf(m, "stsap_sel: %02x, ", self->stsap_sel);
+ seq_printf(m, "dtsap_sel: %02x\n", self->dtsap_sel);
+
+ /* Next socket, please... */
+ self = (irnet_socket *) hashbin_get_next(irnet_server.list);
+ }
+
+ /* Spin lock end */
+ spin_unlock_bh(&irnet_server.spinlock);
+
+ return 0;
+}
+
+static int irnet_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, irnet_proc_show, NULL);
+}
+
+static const struct file_operations irnet_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = irnet_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif /* PROC_FS */
+
+
+/********************** CONFIGURATION/CLEANUP **********************/
+/*
+ * Initialisation and teardown of the IrDA part, called at module
+ * insertion and removal...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare the IrNET layer for operation...
+ */
+int __init
+irda_irnet_init(void)
+{
+ int err = 0;
+
+ DENTER(MODULE_TRACE, "()\n");
+
+ /* Pure paranoia - should be redundant */
+ memset(&irnet_server, 0, sizeof(struct irnet_root));
+
+ /* Setup start of irnet instance list */
+ irnet_server.list = hashbin_new(HB_NOLOCK);
+ DABORT(irnet_server.list == NULL, -ENOMEM,
+ MODULE_ERROR, "Can't allocate hashbin!\n");
+ /* Init spinlock for instance list */
+ spin_lock_init(&irnet_server.spinlock);
+
+ /* Initialise control channel */
+ init_waitqueue_head(&irnet_events.rwait);
+ irnet_events.index = 0;
+ /* Init spinlock for event logging */
+ spin_lock_init(&irnet_events.spinlock);
+
+#ifdef CONFIG_PROC_FS
+ /* Add a /proc file for irnet infos */
+ proc_create("irnet", 0, proc_irda, &irnet_proc_fops);
+#endif /* CONFIG_PROC_FS */
+
+ /* Setup the IrNET server */
+ err = irnet_setup_server();
+
+ if(!err)
+ /* We are no longer functional... */
+ irnet_server.running = 1;
+
+ DEXIT(MODULE_TRACE, "\n");
+ return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup at exit...
+ */
+void __exit
+irda_irnet_cleanup(void)
+{
+ DENTER(MODULE_TRACE, "()\n");
+
+ /* We are no longer there... */
+ irnet_server.running = 0;
+
+#ifdef CONFIG_PROC_FS
+ /* Remove our /proc file */
+ remove_proc_entry("irnet", proc_irda);
+#endif /* CONFIG_PROC_FS */
+
+ /* Remove our IrNET server from existence */
+ irnet_destroy_server();
+
+ /* Remove all instances of IrNET socket still present */
+ hashbin_delete(irnet_server.list, (FREE_FUNC) irda_irnet_destroy);
+
+ DEXIT(MODULE_TRACE, "\n");
+}
diff --git a/net/irda/irnet/irnet_irda.h b/net/irda/irnet/irnet_irda.h
new file mode 100644
index 000000000..3e408952a
--- /dev/null
+++ b/net/irda/irnet/irnet_irda.h
@@ -0,0 +1,178 @@
+/*
+ * IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ * Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains all definitions and declarations necessary for the
+ * IRDA part of the IrNET module (dealing with IrTTP, IrIAS and co).
+ * This file is a private header, so other modules don't want to know
+ * what's in there...
+ */
+
+#ifndef IRNET_IRDA_H
+#define IRNET_IRDA_H
+
+/***************************** INCLUDES *****************************/
+/* Please add other headers in irnet.h */
+
+#include "irnet.h" /* Module global include */
+
+/************************ CONSTANTS & MACROS ************************/
+
+/*
+ * Name of the service (socket name) used by IrNET
+ */
+/* IAS object name (or part of it) */
+#define IRNET_SERVICE_NAME "IrNetv1"
+/* IAS attribute */
+#define IRNET_IAS_VALUE "IrDA:TinyTP:LsapSel"
+/* LMP notify name for client (only for /proc/net/irda/irlmp) */
+#define IRNET_NOTIFY_NAME "IrNET socket"
+/* LMP notify name for server (only for /proc/net/irda/irlmp) */
+#define IRNET_NOTIFY_NAME_SERV "IrNET server"
+
+/****************************** TYPES ******************************/
+
+/*
+ * This is the main structure where we store all the data pertaining to
+ * the IrNET server (listen for connection requests) and the root
+ * of the IrNET socket list
+ */
+typedef struct irnet_root
+{
+ irnet_socket s; /* To pretend we are a client... */
+
+ /* Generic stuff */
+ int magic; /* Paranoia */
+ int running; /* Are we operational ? */
+
+ /* Link list of all IrNET instances opened */
+ hashbin_t * list;
+ spinlock_t spinlock; /* Serialize access to the list */
+ /* Note : the way hashbin has been designed is absolutely not
+ * reentrant, beware... So, we blindly protect all with spinlock */
+
+ /* Handle for the hint bit advertised in IrLMP */
+ void * skey;
+
+ /* Server socket part */
+ struct ias_object * ias_obj; /* Our service name + lsap in IAS */
+
+} irnet_root;
+
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- CONTROL CHANNEL ----------------------- */
+static void
+ irnet_post_event(irnet_socket *,
+ irnet_event,
+ __u32,
+ __u32,
+ char *,
+ __u16);
+/* ----------------------- IRDA SUBROUTINES ----------------------- */
+static inline int
+ irnet_open_tsap(irnet_socket *);
+static inline __u8
+ irnet_ias_to_tsap(irnet_socket *,
+ int,
+ struct ias_value *);
+static inline int
+ irnet_find_lsap_sel(irnet_socket *);
+static inline int
+ irnet_connect_tsap(irnet_socket *);
+static inline int
+ irnet_discover_next_daddr(irnet_socket *);
+static inline int
+ irnet_discover_daddr_and_lsap_sel(irnet_socket *);
+static inline int
+ irnet_dname_to_daddr(irnet_socket *);
+/* ------------------------ SERVER SOCKET ------------------------ */
+static inline int
+ irnet_daddr_to_dname(irnet_socket *);
+static inline irnet_socket *
+ irnet_find_socket(irnet_socket *);
+static inline int
+ irnet_connect_socket(irnet_socket *,
+ irnet_socket *,
+ struct qos_info *,
+ __u32,
+ __u8);
+static inline void
+ irnet_disconnect_server(irnet_socket *,
+ struct sk_buff *);
+static inline int
+ irnet_setup_server(void);
+static inline void
+ irnet_destroy_server(void);
+/* ---------------------- IRDA-TTP CALLBACKS ---------------------- */
+static int
+ irnet_data_indication(void *, /* instance */
+ void *, /* sap */
+ struct sk_buff *);
+static void
+ irnet_disconnect_indication(void *,
+ void *,
+ LM_REASON,
+ struct sk_buff *);
+static void
+ irnet_connect_confirm(void *,
+ void *,
+ struct qos_info *,
+ __u32,
+ __u8,
+ struct sk_buff *);
+static void
+ irnet_flow_indication(void *,
+ void *,
+ LOCAL_FLOW);
+static void
+ irnet_status_indication(void *,
+ LINK_STATUS,
+ LOCK_STATUS);
+static void
+ irnet_connect_indication(void *,
+ void *,
+ struct qos_info *,
+ __u32,
+ __u8,
+ struct sk_buff *);
+/* -------------------- IRDA-IAS/LMP CALLBACKS -------------------- */
+static void
+ irnet_getvalue_confirm(int,
+ __u16,
+ struct ias_value *,
+ void *);
+static void
+ irnet_discovervalue_confirm(int,
+ __u16,
+ struct ias_value *,
+ void *);
+#ifdef DISCOVERY_EVENTS
+static void
+ irnet_discovery_indication(discinfo_t *,
+ DISCOVERY_MODE,
+ void *);
+static void
+ irnet_expiry_indication(discinfo_t *,
+ DISCOVERY_MODE,
+ void *);
+#endif
+
+/**************************** VARIABLES ****************************/
+
+/*
+ * The IrNET server. Listen to connection requests and co...
+ */
+static struct irnet_root irnet_server;
+
+/* Control channel stuff (note : extern) */
+struct irnet_ctrl_channel irnet_events;
+
+/* The /proc/net/irda directory, defined elsewhere... */
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_irda;
+#endif /* CONFIG_PROC_FS */
+
+#endif /* IRNET_IRDA_H */
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
new file mode 100644
index 000000000..1215693fd
--- /dev/null
+++ b/net/irda/irnet/irnet_ppp.c
@@ -0,0 +1,1188 @@
+/*
+ * IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ * Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file implement the PPP interface and /dev/irnet character device.
+ * The PPP interface hook to the ppp_generic module, handle all our
+ * relationship to the PPP code in the kernel (and by extension to pppd),
+ * and exchange PPP frames with this module (send/receive).
+ * The /dev/irnet device is used primarily for 2 functions :
+ * 1) as a stub for pppd (the ppp daemon), so that we can appropriately
+ * generate PPP sessions (we pretend we are a tty).
+ * 2) as a control channel (write commands, read events)
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include "irnet_ppp.h" /* Private header */
+/* Please put other headers in irnet.h - Thanks */
+
+/* Generic PPP callbacks (to call us) */
+static const struct ppp_channel_ops irnet_ppp_ops = {
+ .start_xmit = ppp_irnet_send,
+ .ioctl = ppp_irnet_ioctl
+};
+
+/************************* CONTROL CHANNEL *************************/
+/*
+ * When a pppd instance is not active on /dev/irnet, it acts as a control
+ * channel.
+ * Writing allow to set up the IrDA destination of the IrNET channel,
+ * and any application may be read events happening in IrNET...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write is used to send a command to configure a IrNET channel
+ * before it is open by pppd. The syntax is : "command argument"
+ * Currently there is only two defined commands :
+ * o name : set the requested IrDA nickname of the IrNET peer.
+ * o addr : set the requested IrDA address of the IrNET peer.
+ * Note : the code is crude, but effective...
+ */
+static inline ssize_t
+irnet_ctrl_write(irnet_socket * ap,
+ const char __user *buf,
+ size_t count)
+{
+ char command[IRNET_MAX_COMMAND];
+ char * start; /* Current command being processed */
+ char * next; /* Next command to process */
+ int length; /* Length of current command */
+
+ DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count);
+
+ /* Check for overflow... */
+ DABORT(count >= IRNET_MAX_COMMAND, -ENOMEM,
+ CTRL_ERROR, "Too much data !!!\n");
+
+ /* Get the data in the driver */
+ if(copy_from_user(command, buf, count))
+ {
+ DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+ return -EFAULT;
+ }
+
+ /* Safe terminate the string */
+ command[count] = '\0';
+ DEBUG(CTRL_INFO, "Command line received is ``%s'' (%Zd).\n",
+ command, count);
+
+ /* Check every commands in the command line */
+ next = command;
+ while(next != NULL)
+ {
+ /* Look at the next command */
+ start = next;
+
+ /* Scrap whitespaces before the command */
+ start = skip_spaces(start);
+
+ /* ',' is our command separator */
+ next = strchr(start, ',');
+ if(next)
+ {
+ *next = '\0'; /* Terminate command */
+ length = next - start; /* Length */
+ next++; /* Skip the '\0' */
+ }
+ else
+ length = strlen(start);
+
+ DEBUG(CTRL_INFO, "Found command ``%s'' (%d).\n", start, length);
+
+ /* Check if we recognised one of the known command
+ * We can't use "switch" with strings, so hack with "continue" */
+
+ /* First command : name -> Requested IrDA nickname */
+ if(!strncmp(start, "name", 4))
+ {
+ /* Copy the name only if is included and not "any" */
+ if((length > 5) && (strcmp(start + 5, "any")))
+ {
+ /* Strip out trailing whitespaces */
+ while(isspace(start[length - 1]))
+ length--;
+
+ DABORT(length < 5 || length > NICKNAME_MAX_LEN + 5,
+ -EINVAL, CTRL_ERROR, "Invalid nickname.\n");
+
+ /* Copy the name for later reuse */
+ memcpy(ap->rname, start + 5, length - 5);
+ ap->rname[length - 5] = '\0';
+ }
+ else
+ ap->rname[0] = '\0';
+ DEBUG(CTRL_INFO, "Got rname = ``%s''\n", ap->rname);
+
+ /* Restart the loop */
+ continue;
+ }
+
+ /* Second command : addr, daddr -> Requested IrDA destination address
+ * Also process : saddr -> Requested IrDA source address */
+ if((!strncmp(start, "addr", 4)) ||
+ (!strncmp(start, "daddr", 5)) ||
+ (!strncmp(start, "saddr", 5)))
+ {
+ __u32 addr = DEV_ADDR_ANY;
+
+ /* Copy the address only if is included and not "any" */
+ if((length > 5) && (strcmp(start + 5, "any")))
+ {
+ char * begp = start + 5;
+ char * endp;
+
+ /* Scrap whitespaces before the command */
+ begp = skip_spaces(begp);
+
+ /* Convert argument to a number (last arg is the base) */
+ addr = simple_strtoul(begp, &endp, 16);
+ /* Has it worked ? (endp should be start + length) */
+ DABORT(endp <= (start + 5), -EINVAL,
+ CTRL_ERROR, "Invalid address.\n");
+ }
+ /* Which type of address ? */
+ if(start[0] == 's')
+ {
+ /* Save it */
+ ap->rsaddr = addr;
+ DEBUG(CTRL_INFO, "Got rsaddr = %08x\n", ap->rsaddr);
+ }
+ else
+ {
+ /* Save it */
+ ap->rdaddr = addr;
+ DEBUG(CTRL_INFO, "Got rdaddr = %08x\n", ap->rdaddr);
+ }
+
+ /* Restart the loop */
+ continue;
+ }
+
+ /* Other possible command : connect N (number of retries) */
+
+ /* No command matched -> Failed... */
+ DABORT(1, -EINVAL, CTRL_ERROR, "Not a recognised IrNET command.\n");
+ }
+
+ /* Success : we have parsed all commands successfully */
+ return count;
+}
+
+#ifdef INITIAL_DISCOVERY
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_get_discovery_log (self)
+ *
+ * Query the content on the discovery log if not done
+ *
+ * This function query the current content of the discovery log
+ * at the startup of the event channel and save it in the internal struct.
+ */
+static void
+irnet_get_discovery_log(irnet_socket * ap)
+{
+ __u16 mask = irlmp_service_to_hint(S_LAN);
+
+ /* Ask IrLMP for the current discovery log */
+ ap->discoveries = irlmp_get_discoveries(&ap->disco_number, mask,
+ DISCOVERY_DEFAULT_SLOTS);
+
+ /* Check if the we got some results */
+ if(ap->discoveries == NULL)
+ ap->disco_number = -1;
+
+ DEBUG(CTRL_INFO, "Got the log (0x%p), size is %d\n",
+ ap->discoveries, ap->disco_number);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_read_discovery_log (self, event)
+ *
+ * Read the content on the discovery log
+ *
+ * This function dump the current content of the discovery log
+ * at the startup of the event channel.
+ * Return 1 if wrote an event on the control channel...
+ *
+ * State of the ap->disco_XXX variables :
+ * Socket creation : discoveries = NULL ; disco_index = 0 ; disco_number = 0
+ * While reading : discoveries = ptr ; disco_index = X ; disco_number = Y
+ * After reading : discoveries = NULL ; disco_index = Y ; disco_number = -1
+ */
+static inline int
+irnet_read_discovery_log(irnet_socket *ap, char *event, int buf_size)
+{
+ int done_event = 0;
+
+ DENTER(CTRL_TRACE, "(ap=0x%p, event=0x%p)\n",
+ ap, event);
+
+ /* Test if we have some work to do or we have already finished */
+ if(ap->disco_number == -1)
+ {
+ DEBUG(CTRL_INFO, "Already done\n");
+ return 0;
+ }
+
+ /* Test if it's the first time and therefore we need to get the log */
+ if(ap->discoveries == NULL)
+ irnet_get_discovery_log(ap);
+
+ /* Check if we have more item to dump */
+ if(ap->disco_index < ap->disco_number)
+ {
+ /* Write an event */
+ snprintf(event, buf_size,
+ "Found %08x (%s) behind %08x {hints %02X-%02X}\n",
+ ap->discoveries[ap->disco_index].daddr,
+ ap->discoveries[ap->disco_index].info,
+ ap->discoveries[ap->disco_index].saddr,
+ ap->discoveries[ap->disco_index].hints[0],
+ ap->discoveries[ap->disco_index].hints[1]);
+ DEBUG(CTRL_INFO, "Writing discovery %d : %s\n",
+ ap->disco_index, ap->discoveries[ap->disco_index].info);
+
+ /* We have an event */
+ done_event = 1;
+ /* Next discovery */
+ ap->disco_index++;
+ }
+
+ /* Check if we have done the last item */
+ if(ap->disco_index >= ap->disco_number)
+ {
+ /* No more items : remove the log and signal termination */
+ DEBUG(CTRL_INFO, "Cleaning up log (0x%p)\n",
+ ap->discoveries);
+ if(ap->discoveries != NULL)
+ {
+ /* Cleanup our copy of the discovery log */
+ kfree(ap->discoveries);
+ ap->discoveries = NULL;
+ }
+ ap->disco_number = -1;
+ }
+
+ return done_event;
+}
+#endif /* INITIAL_DISCOVERY */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read is used to get IrNET events
+ */
+static inline ssize_t
+irnet_ctrl_read(irnet_socket * ap,
+ struct file * file,
+ char __user * buf,
+ size_t count)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ char event[75];
+ ssize_t ret = 0;
+
+ DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count);
+
+#ifdef INITIAL_DISCOVERY
+ /* Check if we have read the log */
+ if (irnet_read_discovery_log(ap, event, sizeof(event)))
+ {
+ count = min(strlen(event), count);
+ if (copy_to_user(buf, event, count))
+ {
+ DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+ return -EFAULT;
+ }
+
+ DEXIT(CTRL_TRACE, "\n");
+ return count;
+ }
+#endif /* INITIAL_DISCOVERY */
+
+ /* Put ourselves on the wait queue to be woken up */
+ add_wait_queue(&irnet_events.rwait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ for(;;)
+ {
+ /* If there is unread events */
+ ret = 0;
+ if(ap->event_index != irnet_events.index)
+ break;
+ ret = -EAGAIN;
+ if(file->f_flags & O_NONBLOCK)
+ break;
+ ret = -ERESTARTSYS;
+ if(signal_pending(current))
+ break;
+ /* Yield and wait to be woken up */
+ schedule();
+ }
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&irnet_events.rwait, &wait);
+
+ /* Did we got it ? */
+ if(ret != 0)
+ {
+ /* No, return the error code */
+ DEXIT(CTRL_TRACE, " - ret %Zd\n", ret);
+ return ret;
+ }
+
+ /* Which event is it ? */
+ switch(irnet_events.log[ap->event_index].event)
+ {
+ case IRNET_DISCOVER:
+ snprintf(event, sizeof(event),
+ "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].saddr,
+ irnet_events.log[ap->event_index].hints.byte[0],
+ irnet_events.log[ap->event_index].hints.byte[1]);
+ break;
+ case IRNET_EXPIRE:
+ snprintf(event, sizeof(event),
+ "Expired %08x (%s) behind %08x {hints %02X-%02X}\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].saddr,
+ irnet_events.log[ap->event_index].hints.byte[0],
+ irnet_events.log[ap->event_index].hints.byte[1]);
+ break;
+ case IRNET_CONNECT_TO:
+ snprintf(event, sizeof(event), "Connected to %08x (%s) on ppp%d\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].unit);
+ break;
+ case IRNET_CONNECT_FROM:
+ snprintf(event, sizeof(event), "Connection from %08x (%s) on ppp%d\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].unit);
+ break;
+ case IRNET_REQUEST_FROM:
+ snprintf(event, sizeof(event), "Request from %08x (%s) behind %08x\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].saddr);
+ break;
+ case IRNET_NOANSWER_FROM:
+ snprintf(event, sizeof(event), "No-answer from %08x (%s) on ppp%d\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].unit);
+ break;
+ case IRNET_BLOCKED_LINK:
+ snprintf(event, sizeof(event), "Blocked link with %08x (%s) on ppp%d\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].unit);
+ break;
+ case IRNET_DISCONNECT_FROM:
+ snprintf(event, sizeof(event), "Disconnection from %08x (%s) on ppp%d\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name,
+ irnet_events.log[ap->event_index].unit);
+ break;
+ case IRNET_DISCONNECT_TO:
+ snprintf(event, sizeof(event), "Disconnected to %08x (%s)\n",
+ irnet_events.log[ap->event_index].daddr,
+ irnet_events.log[ap->event_index].name);
+ break;
+ default:
+ snprintf(event, sizeof(event), "Bug\n");
+ }
+ /* Increment our event index */
+ ap->event_index = (ap->event_index + 1) % IRNET_MAX_EVENTS;
+
+ DEBUG(CTRL_INFO, "Event is :%s", event);
+
+ count = min(strlen(event), count);
+ if (copy_to_user(buf, event, count))
+ {
+ DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+ return -EFAULT;
+ }
+
+ DEXIT(CTRL_TRACE, "\n");
+ return count;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Poll : called when someone do a select on /dev/irnet.
+ * Just check if there are new events...
+ */
+static inline unsigned int
+irnet_ctrl_poll(irnet_socket * ap,
+ struct file * file,
+ poll_table * wait)
+{
+ unsigned int mask;
+
+ DENTER(CTRL_TRACE, "(ap=0x%p)\n", ap);
+
+ poll_wait(file, &irnet_events.rwait, wait);
+ mask = POLLOUT | POLLWRNORM;
+ /* If there is unread events */
+ if(ap->event_index != irnet_events.index)
+ mask |= POLLIN | POLLRDNORM;
+#ifdef INITIAL_DISCOVERY
+ if(ap->disco_number != -1)
+ {
+ /* Test if it's the first time and therefore we need to get the log */
+ if(ap->discoveries == NULL)
+ irnet_get_discovery_log(ap);
+ /* Recheck */
+ if(ap->disco_number != -1)
+ mask |= POLLIN | POLLRDNORM;
+ }
+#endif /* INITIAL_DISCOVERY */
+
+ DEXIT(CTRL_TRACE, " - mask=0x%X\n", mask);
+ return mask;
+}
+
+
+/*********************** FILESYSTEM CALLBACKS ***********************/
+/*
+ * Implement the usual open, read, write functions that will be called
+ * by the file system when some action is performed on /dev/irnet.
+ * Most of those actions will in fact be performed by "pppd" or
+ * the control channel, we just act as a redirector...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Open : when somebody open /dev/irnet
+ * We basically create a new instance of irnet and initialise it.
+ */
+static int
+dev_irnet_open(struct inode * inode,
+ struct file * file)
+{
+ struct irnet_socket * ap;
+ int err;
+
+ DENTER(FS_TRACE, "(file=0x%p)\n", file);
+
+#ifdef SECURE_DEVIRNET
+ /* This could (should?) be enforced by the permissions on /dev/irnet. */
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+#endif /* SECURE_DEVIRNET */
+
+ /* Allocate a private structure for this IrNET instance */
+ ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+ DABORT(ap == NULL, -ENOMEM, FS_ERROR, "Can't allocate struct irnet...\n");
+
+ /* initialize the irnet structure */
+ ap->file = file;
+
+ /* PPP channel setup */
+ ap->ppp_open = 0;
+ ap->chan.private = ap;
+ ap->chan.ops = &irnet_ppp_ops;
+ ap->chan.mtu = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN);
+ ap->chan.hdrlen = 2 + TTP_MAX_HEADER; /* for A/C + Max IrDA hdr */
+ /* PPP parameters */
+ ap->mru = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN);
+ ap->xaccm[0] = ~0U;
+ ap->xaccm[3] = 0x60000000U;
+ ap->raccm = ~0U;
+
+ /* Setup the IrDA part... */
+ err = irda_irnet_create(ap);
+ if(err)
+ {
+ DERROR(FS_ERROR, "Can't setup IrDA link...\n");
+ kfree(ap);
+
+ return err;
+ }
+
+ /* For the control channel */
+ ap->event_index = irnet_events.index; /* Cancel all past events */
+
+ mutex_init(&ap->lock);
+
+ /* Put our stuff where we will be able to find it later */
+ file->private_data = ap;
+
+ DEXIT(FS_TRACE, " - ap=0x%p\n", ap);
+
+ return 0;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Close : when somebody close /dev/irnet
+ * Destroy the instance of /dev/irnet
+ */
+static int
+dev_irnet_close(struct inode * inode,
+ struct file * file)
+{
+ irnet_socket * ap = file->private_data;
+
+ DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n",
+ file, ap);
+ DABORT(ap == NULL, 0, FS_ERROR, "ap is NULL !!!\n");
+
+ /* Detach ourselves */
+ file->private_data = NULL;
+
+ /* Close IrDA stuff */
+ irda_irnet_destroy(ap);
+
+ /* Disconnect from the generic PPP layer if not already done */
+ if(ap->ppp_open)
+ {
+ DERROR(FS_ERROR, "Channel still registered - deregistering !\n");
+ ap->ppp_open = 0;
+ ppp_unregister_channel(&ap->chan);
+ }
+
+ kfree(ap);
+
+ DEXIT(FS_TRACE, "\n");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Write does nothing.
+ * (we receive packet from ppp_generic through ppp_irnet_send())
+ */
+static ssize_t
+dev_irnet_write(struct file * file,
+ const char __user *buf,
+ size_t count,
+ loff_t * ppos)
+{
+ irnet_socket * ap = file->private_data;
+
+ DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n",
+ file, ap, count);
+ DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n");
+
+ /* If we are connected to ppp_generic, let it handle the job */
+ if(ap->ppp_open)
+ return -EAGAIN;
+ else
+ return irnet_ctrl_write(ap, buf, count);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read doesn't do much either.
+ * (pppd poll us, but ultimately reads through /dev/ppp)
+ */
+static ssize_t
+dev_irnet_read(struct file * file,
+ char __user * buf,
+ size_t count,
+ loff_t * ppos)
+{
+ irnet_socket * ap = file->private_data;
+
+ DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n",
+ file, ap, count);
+ DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n");
+
+ /* If we are connected to ppp_generic, let it handle the job */
+ if(ap->ppp_open)
+ return -EAGAIN;
+ else
+ return irnet_ctrl_read(ap, file, buf, count);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Poll : called when someone do a select on /dev/irnet
+ */
+static unsigned int
+dev_irnet_poll(struct file * file,
+ poll_table * wait)
+{
+ irnet_socket * ap = file->private_data;
+ unsigned int mask;
+
+ DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n",
+ file, ap);
+
+ mask = POLLOUT | POLLWRNORM;
+ DABORT(ap == NULL, mask, FS_ERROR, "ap is NULL !!!\n");
+
+ /* If we are connected to ppp_generic, let it handle the job */
+ if(!ap->ppp_open)
+ mask |= irnet_ctrl_poll(ap, file, wait);
+
+ DEXIT(FS_TRACE, " - mask=0x%X\n", mask);
+ return mask;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * IOCtl : Called when someone does some ioctls on /dev/irnet
+ * This is the way pppd configure us and control us while the PPP
+ * instance is active.
+ */
+static long
+dev_irnet_ioctl(
+ struct file * file,
+ unsigned int cmd,
+ unsigned long arg)
+{
+ irnet_socket * ap = file->private_data;
+ int err;
+ int val;
+ void __user *argp = (void __user *)arg;
+
+ DENTER(FS_TRACE, "(file=0x%p, ap=0x%p, cmd=0x%X)\n",
+ file, ap, cmd);
+
+ /* Basic checks... */
+ DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n");
+#ifdef SECURE_DEVIRNET
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+#endif /* SECURE_DEVIRNET */
+
+ err = -EFAULT;
+ switch(cmd)
+ {
+ /* Set discipline (should be N_SYNC_PPP or N_TTY) */
+ case TIOCSETD:
+ if(get_user(val, (int __user *)argp))
+ break;
+ if((val == N_SYNC_PPP) || (val == N_PPP))
+ {
+ DEBUG(FS_INFO, "Entering PPP discipline.\n");
+ /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+ err = ppp_register_channel(&ap->chan);
+ if(err == 0)
+ {
+ /* Our ppp side is active */
+ ap->ppp_open = 1;
+
+ DEBUG(FS_INFO, "Trying to establish a connection.\n");
+ /* Setup the IrDA link now - may fail... */
+ irda_irnet_connect(ap);
+ }
+ else
+ DERROR(FS_ERROR, "Can't setup PPP channel...\n");
+
+ mutex_unlock(&ap->lock);
+ }
+ else
+ {
+ /* In theory, should be N_TTY */
+ DEBUG(FS_INFO, "Exiting PPP discipline.\n");
+ /* Disconnect from the generic PPP layer */
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+ if(ap->ppp_open)
+ {
+ ap->ppp_open = 0;
+ ppp_unregister_channel(&ap->chan);
+ }
+ else
+ DERROR(FS_ERROR, "Channel not registered !\n");
+ err = 0;
+
+ mutex_unlock(&ap->lock);
+ }
+ break;
+
+ /* Query PPP channel and unit number */
+ case PPPIOCGCHAN:
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+ if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan),
+ (int __user *)argp))
+ err = 0;
+
+ mutex_unlock(&ap->lock);
+ break;
+ case PPPIOCGUNIT:
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+ if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan),
+ (int __user *)argp))
+ err = 0;
+
+ mutex_unlock(&ap->lock);
+ break;
+
+ /* All these ioctls can be passed both directly and from ppp_generic,
+ * so we just deal with them in one place...
+ */
+ case PPPIOCGFLAGS:
+ case PPPIOCSFLAGS:
+ case PPPIOCGASYNCMAP:
+ case PPPIOCSASYNCMAP:
+ case PPPIOCGRASYNCMAP:
+ case PPPIOCSRASYNCMAP:
+ case PPPIOCGXASYNCMAP:
+ case PPPIOCSXASYNCMAP:
+ case PPPIOCGMRU:
+ case PPPIOCSMRU:
+ DEBUG(FS_INFO, "Standard PPP ioctl.\n");
+ if(!capable(CAP_NET_ADMIN))
+ err = -EPERM;
+ else {
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+ err = ppp_irnet_ioctl(&ap->chan, cmd, arg);
+
+ mutex_unlock(&ap->lock);
+ }
+ break;
+
+ /* TTY IOCTLs : Pretend that we are a tty, to keep pppd happy */
+ /* Get termios */
+ case TCGETS:
+ DEBUG(FS_INFO, "Get termios.\n");
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+#ifndef TCGETS2
+ if(!kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios))
+ err = 0;
+#else
+ if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios))
+ err = 0;
+#endif
+
+ mutex_unlock(&ap->lock);
+ break;
+ /* Set termios */
+ case TCSETSF:
+ DEBUG(FS_INFO, "Set termios.\n");
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+
+#ifndef TCGETS2
+ if(!user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp))
+ err = 0;
+#else
+ if(!user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp))
+ err = 0;
+#endif
+
+ mutex_unlock(&ap->lock);
+ break;
+
+ /* Set DTR/RTS */
+ case TIOCMBIS:
+ case TIOCMBIC:
+ /* Set exclusive/non-exclusive mode */
+ case TIOCEXCL:
+ case TIOCNXCL:
+ DEBUG(FS_INFO, "TTY compatibility.\n");
+ err = 0;
+ break;
+
+ case TCGETA:
+ DEBUG(FS_INFO, "TCGETA\n");
+ break;
+
+ case TCFLSH:
+ DEBUG(FS_INFO, "TCFLSH\n");
+ /* Note : this will flush buffers in PPP, so it *must* be done
+ * We should also worry that we don't accept junk here and that
+ * we get rid of our own buffers */
+#ifdef FLUSH_TO_PPP
+ if (mutex_lock_interruptible(&ap->lock))
+ return -EINTR;
+ ppp_output_wakeup(&ap->chan);
+ mutex_unlock(&ap->lock);
+#endif /* FLUSH_TO_PPP */
+ err = 0;
+ break;
+
+ case FIONREAD:
+ DEBUG(FS_INFO, "FIONREAD\n");
+ val = 0;
+ if(put_user(val, (int __user *)argp))
+ break;
+ err = 0;
+ break;
+
+ default:
+ DERROR(FS_ERROR, "Unsupported ioctl (0x%X)\n", cmd);
+ err = -ENOTTY;
+ }
+
+ DEXIT(FS_TRACE, " - err = 0x%X\n", err);
+ return err;
+}
+
+/************************** PPP CALLBACKS **************************/
+/*
+ * This are the functions that the generic PPP driver in the kernel
+ * will call to communicate to us.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare the ppp frame for transmission over the IrDA socket.
+ * We make sure that the header space is enough, and we change ppp header
+ * according to flags passed by pppd.
+ * This is not a callback, but just a helper function used in ppp_irnet_send()
+ */
+static inline struct sk_buff *
+irnet_prepare_skb(irnet_socket * ap,
+ struct sk_buff * skb)
+{
+ unsigned char * data;
+ int proto; /* PPP protocol */
+ int islcp; /* Protocol == LCP */
+ int needaddr; /* Need PPP address */
+
+ DENTER(PPP_TRACE, "(ap=0x%p, skb=0x%p)\n",
+ ap, skb);
+
+ /* Extract PPP protocol from the frame */
+ data = skb->data;
+ proto = (data[0] << 8) + data[1];
+
+ /* LCP packets with codes between 1 (configure-request)
+ * and 7 (code-reject) must be sent as though no options
+ * have been negotiated. */
+ islcp = (proto == PPP_LCP) && (1 <= data[2]) && (data[2] <= 7);
+
+ /* compress protocol field if option enabled */
+ if((data[0] == 0) && (ap->flags & SC_COMP_PROT) && (!islcp))
+ skb_pull(skb,1);
+
+ /* Check if we need address/control fields */
+ needaddr = 2*((ap->flags & SC_COMP_AC) == 0 || islcp);
+
+ /* Is the skb headroom large enough to contain all IrDA-headers? */
+ if((skb_headroom(skb) < (ap->max_header_size + needaddr)) ||
+ (skb_shared(skb)))
+ {
+ struct sk_buff * new_skb;
+
+ DEBUG(PPP_INFO, "Reallocating skb\n");
+
+ /* Create a new skb */
+ new_skb = skb_realloc_headroom(skb, ap->max_header_size + needaddr);
+
+ /* We have to free the original skb anyway */
+ dev_kfree_skb(skb);
+
+ /* Did the realloc succeed ? */
+ DABORT(new_skb == NULL, NULL, PPP_ERROR, "Could not realloc skb\n");
+
+ /* Use the new skb instead */
+ skb = new_skb;
+ }
+
+ /* prepend address/control fields if necessary */
+ if(needaddr)
+ {
+ skb_push(skb, 2);
+ skb->data[0] = PPP_ALLSTATIONS;
+ skb->data[1] = PPP_UI;
+ }
+
+ DEXIT(PPP_TRACE, "\n");
+
+ return skb;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send a packet to the peer over the IrTTP connection.
+ * Returns 1 iff the packet was accepted.
+ * Returns 0 iff packet was not consumed.
+ * If the packet was not accepted, we will call ppp_output_wakeup
+ * at some later time to reactivate flow control in ppp_generic.
+ */
+static int
+ppp_irnet_send(struct ppp_channel * chan,
+ struct sk_buff * skb)
+{
+ irnet_socket * self = (struct irnet_socket *) chan->private;
+ int ret;
+
+ DENTER(PPP_TRACE, "(channel=0x%p, ap/self=0x%p)\n",
+ chan, self);
+
+ /* Check if things are somewhat valid... */
+ DASSERT(self != NULL, 0, PPP_ERROR, "Self is NULL !!!\n");
+
+ /* Check if we are connected */
+ if(!(test_bit(0, &self->ttp_open)))
+ {
+#ifdef CONNECT_IN_SEND
+ /* Let's try to connect one more time... */
+ /* Note : we won't be connected after this call, but we should be
+ * ready for next packet... */
+ /* If we are already connecting, this will fail */
+ irda_irnet_connect(self);
+#endif /* CONNECT_IN_SEND */
+
+ DEBUG(PPP_INFO, "IrTTP not ready ! (%ld-%ld)\n",
+ self->ttp_open, self->ttp_connect);
+
+ /* Note : we can either drop the packet or block the packet.
+ *
+ * Blocking the packet allow us a better connection time,
+ * because by calling ppp_output_wakeup() we can have
+ * ppp_generic resending the LCP request immediately to us,
+ * rather than waiting for one of pppd periodic transmission of
+ * LCP request.
+ *
+ * On the other hand, if we block all packet, all those periodic
+ * transmissions of pppd accumulate in ppp_generic, creating a
+ * backlog of LCP request. When we eventually connect later on,
+ * we have to transmit all this backlog before we can connect
+ * proper (if we don't timeout before).
+ *
+ * The current strategy is as follow :
+ * While we are attempting to connect, we block packets to get
+ * a better connection time.
+ * If we fail to connect, we drain the queue and start dropping packets
+ */
+#ifdef BLOCK_WHEN_CONNECT
+ /* If we are attempting to connect */
+ if(test_bit(0, &self->ttp_connect))
+ {
+ /* Blocking packet, ppp_generic will retry later */
+ return 0;
+ }
+#endif /* BLOCK_WHEN_CONNECT */
+
+ /* Dropping packet, pppd will retry later */
+ dev_kfree_skb(skb);
+ return 1;
+ }
+
+ /* Check if the queue can accept any packet, otherwise block */
+ if(self->tx_flow != FLOW_START)
+ DRETURN(0, PPP_INFO, "IrTTP queue full (%d skbs)...\n",
+ skb_queue_len(&self->tsap->tx_queue));
+
+ /* Prepare ppp frame for transmission */
+ skb = irnet_prepare_skb(self, skb);
+ DABORT(skb == NULL, 1, PPP_ERROR, "Prepare skb for Tx failed.\n");
+
+ /* Send the packet to IrTTP */
+ ret = irttp_data_request(self->tsap, skb);
+ if(ret < 0)
+ {
+ /*
+ * > IrTTPs tx queue is full, so we just have to
+ * > drop the frame! You might think that we should
+ * > just return -1 and don't deallocate the frame,
+ * > but that is dangerous since it's possible that
+ * > we have replaced the original skb with a new
+ * > one with larger headroom, and that would really
+ * > confuse do_dev_queue_xmit() in dev.c! I have
+ * > tried :-) DB
+ * Correction : we verify the flow control above (self->tx_flow),
+ * so we come here only if IrTTP doesn't like the packet (empty,
+ * too large, IrTTP not connected). In those rare cases, it's ok
+ * to drop it, we don't want to see it here again...
+ * Jean II
+ */
+ DERROR(PPP_ERROR, "IrTTP doesn't like this packet !!! (0x%X)\n", ret);
+ /* irttp_data_request already free the packet */
+ }
+
+ DEXIT(PPP_TRACE, "\n");
+ return 1; /* Packet has been consumed */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Take care of the ioctls that ppp_generic doesn't want to deal with...
+ * Note : we are also called from dev_irnet_ioctl().
+ */
+static int
+ppp_irnet_ioctl(struct ppp_channel * chan,
+ unsigned int cmd,
+ unsigned long arg)
+{
+ irnet_socket * ap = (struct irnet_socket *) chan->private;
+ int err;
+ int val;
+ u32 accm[8];
+ void __user *argp = (void __user *)arg;
+
+ DENTER(PPP_TRACE, "(channel=0x%p, ap=0x%p, cmd=0x%X)\n",
+ chan, ap, cmd);
+
+ /* Basic checks... */
+ DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n");
+
+ err = -EFAULT;
+ switch(cmd)
+ {
+ /* PPP flags */
+ case PPPIOCGFLAGS:
+ val = ap->flags | ap->rbits;
+ if(put_user(val, (int __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCSFLAGS:
+ if(get_user(val, (int __user *) argp))
+ break;
+ ap->flags = val & ~SC_RCV_BITS;
+ ap->rbits = val & SC_RCV_BITS;
+ err = 0;
+ break;
+
+ /* Async map stuff - all dummy to please pppd */
+ case PPPIOCGASYNCMAP:
+ if(put_user(ap->xaccm[0], (u32 __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCSASYNCMAP:
+ if(get_user(ap->xaccm[0], (u32 __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCGRASYNCMAP:
+ if(put_user(ap->raccm, (u32 __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCSRASYNCMAP:
+ if(get_user(ap->raccm, (u32 __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCGXASYNCMAP:
+ if(copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
+ break;
+ err = 0;
+ break;
+ case PPPIOCSXASYNCMAP:
+ if(copy_from_user(accm, argp, sizeof(accm)))
+ break;
+ accm[2] &= ~0x40000000U; /* can't escape 0x5e */
+ accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */
+ memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
+ err = 0;
+ break;
+
+ /* Max PPP frame size */
+ case PPPIOCGMRU:
+ if(put_user(ap->mru, (int __user *) argp))
+ break;
+ err = 0;
+ break;
+ case PPPIOCSMRU:
+ if(get_user(val, (int __user *) argp))
+ break;
+ if(val < PPP_MRU)
+ val = PPP_MRU;
+ ap->mru = val;
+ err = 0;
+ break;
+
+ default:
+ DEBUG(PPP_INFO, "Unsupported ioctl (0x%X)\n", cmd);
+ err = -ENOIOCTLCMD;
+ }
+
+ DEXIT(PPP_TRACE, " - err = 0x%X\n", err);
+ return err;
+}
+
+/************************** INITIALISATION **************************/
+/*
+ * Module initialisation and all that jazz...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Hook our device callbacks in the filesystem, to connect our code
+ * to /dev/irnet
+ */
+static inline int __init
+ppp_irnet_init(void)
+{
+ int err = 0;
+
+ DENTER(MODULE_TRACE, "()\n");
+
+ /* Allocate ourselves as a minor in the misc range */
+ err = misc_register(&irnet_misc_device);
+
+ DEXIT(MODULE_TRACE, "\n");
+ return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup at exit...
+ */
+static inline void __exit
+ppp_irnet_cleanup(void)
+{
+ DENTER(MODULE_TRACE, "()\n");
+
+ /* De-allocate /dev/irnet minor in misc range */
+ misc_deregister(&irnet_misc_device);
+
+ DEXIT(MODULE_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module main entry point
+ */
+static int __init
+irnet_init(void)
+{
+ int err;
+
+ /* Initialise both parts... */
+ err = irda_irnet_init();
+ if(!err)
+ err = ppp_irnet_init();
+ return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module exit
+ */
+static void __exit
+irnet_cleanup(void)
+{
+ irda_irnet_cleanup();
+ ppp_irnet_cleanup();
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module magic
+ */
+module_init(irnet_init);
+module_exit(irnet_cleanup);
+MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("IrNET : Synchronous PPP over IrDA");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(10, 187);
diff --git a/net/irda/irnet/irnet_ppp.h b/net/irda/irnet/irnet_ppp.h
new file mode 100644
index 000000000..940225866
--- /dev/null
+++ b/net/irda/irnet/irnet_ppp.h
@@ -0,0 +1,119 @@
+/*
+ * IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ * Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains all definitions and declarations necessary for the
+ * PPP part of the IrNET module.
+ * This file is a private header, so other modules don't want to know
+ * what's in there...
+ */
+
+#ifndef IRNET_PPP_H
+#define IRNET_PPP_H
+
+/***************************** INCLUDES *****************************/
+
+#include "irnet.h" /* Module global include */
+
+/************************ CONSTANTS & MACROS ************************/
+
+/* /dev/irnet file constants */
+#define IRNET_MAJOR 10 /* Misc range */
+#define IRNET_MINOR 187 /* Official allocation */
+
+/* IrNET control channel stuff */
+#define IRNET_MAX_COMMAND 256 /* Max length of a command line */
+
+/* PPP hardcore stuff */
+
+/* Bits in rbits (PPP flags in irnet struct) */
+#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
+
+/* Bit numbers in busy */
+#define XMIT_BUSY 0
+#define RECV_BUSY 1
+#define XMIT_WAKEUP 2
+#define XMIT_FULL 3
+
+/* Queue management */
+#define PPPSYNC_MAX_RQLEN 32 /* arbitrary */
+
+/****************************** TYPES ******************************/
+
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- CONTROL CHANNEL ----------------------- */
+static inline ssize_t
+ irnet_ctrl_write(irnet_socket *,
+ const char *,
+ size_t);
+static inline ssize_t
+ irnet_ctrl_read(irnet_socket *,
+ struct file *,
+ char *,
+ size_t);
+static inline unsigned int
+ irnet_ctrl_poll(irnet_socket *,
+ struct file *,
+ poll_table *);
+/* ----------------------- CHARACTER DEVICE ----------------------- */
+static int
+ dev_irnet_open(struct inode *, /* fs callback : open */
+ struct file *),
+ dev_irnet_close(struct inode *,
+ struct file *);
+static ssize_t
+ dev_irnet_write(struct file *,
+ const char __user *,
+ size_t,
+ loff_t *),
+ dev_irnet_read(struct file *,
+ char __user *,
+ size_t,
+ loff_t *);
+static unsigned int
+ dev_irnet_poll(struct file *,
+ poll_table *);
+static long
+ dev_irnet_ioctl(struct file *,
+ unsigned int,
+ unsigned long);
+/* ------------------------ PPP INTERFACE ------------------------ */
+static inline struct sk_buff *
+ irnet_prepare_skb(irnet_socket *,
+ struct sk_buff *);
+static int
+ ppp_irnet_send(struct ppp_channel *,
+ struct sk_buff *);
+static int
+ ppp_irnet_ioctl(struct ppp_channel *,
+ unsigned int,
+ unsigned long);
+
+/**************************** VARIABLES ****************************/
+
+/* Filesystem callbacks (to call us) */
+static const struct file_operations irnet_device_fops =
+{
+ .owner = THIS_MODULE,
+ .read = dev_irnet_read,
+ .write = dev_irnet_write,
+ .poll = dev_irnet_poll,
+ .unlocked_ioctl = dev_irnet_ioctl,
+ .open = dev_irnet_open,
+ .release = dev_irnet_close,
+ .llseek = noop_llseek,
+ /* Also : llseek, readdir, mmap, flush, fsync, fasync, lock, readv, writev */
+};
+
+/* Structure so that the misc major (drivers/char/misc.c) take care of us... */
+static struct miscdevice irnet_misc_device =
+{
+ IRNET_MINOR,
+ "irnet",
+ &irnet_device_fops
+};
+
+#endif /* IRNET_PPP_H */
diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c
new file mode 100644
index 000000000..e15c40e86
--- /dev/null
+++ b/net/irda/irnetlink.c
@@ -0,0 +1,158 @@
+/*
+ * IrDA netlink layer, for stack configuration.
+ *
+ * Copyright (c) 2007 Samuel Ortiz <samuel@sortiz.org>
+ *
+ * Partly based on the 802.11 nelink implementation
+ * (see net/wireless/nl80211.c) which is:
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/socket.h>
+#include <linux/irda.h>
+#include <linux/gfp.h>
+#include <net/net_namespace.h>
+#include <net/sock.h>
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/genetlink.h>
+
+
+
+static struct genl_family irda_nl_family = {
+ .id = GENL_ID_GENERATE,
+ .name = IRDA_NL_NAME,
+ .hdrsize = 0,
+ .version = IRDA_NL_VERSION,
+ .maxattr = IRDA_NL_CMD_MAX,
+};
+
+static struct net_device * ifname_to_netdev(struct net *net, struct genl_info *info)
+{
+ char * ifname;
+
+ if (!info->attrs[IRDA_NL_ATTR_IFNAME])
+ return NULL;
+
+ ifname = nla_data(info->attrs[IRDA_NL_ATTR_IFNAME]);
+
+ pr_debug("%s(): Looking for %s\n", __func__, ifname);
+
+ return dev_get_by_name(net, ifname);
+}
+
+static int irda_nl_set_mode(struct sk_buff *skb, struct genl_info *info)
+{
+ struct net_device * dev;
+ struct irlap_cb * irlap;
+ u32 mode;
+
+ if (!info->attrs[IRDA_NL_ATTR_MODE])
+ return -EINVAL;
+
+ mode = nla_get_u32(info->attrs[IRDA_NL_ATTR_MODE]);
+
+ pr_debug("%s(): Switching to mode: %d\n", __func__, mode);
+
+ dev = ifname_to_netdev(&init_net, info);
+ if (!dev)
+ return -ENODEV;
+
+ irlap = (struct irlap_cb *)dev->atalk_ptr;
+ if (!irlap) {
+ dev_put(dev);
+ return -ENODEV;
+ }
+
+ irlap->mode = mode;
+
+ dev_put(dev);
+
+ return 0;
+}
+
+static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info)
+{
+ struct net_device * dev;
+ struct irlap_cb * irlap;
+ struct sk_buff *msg;
+ void *hdr;
+ int ret = -ENOBUFS;
+
+ dev = ifname_to_netdev(&init_net, info);
+ if (!dev)
+ return -ENODEV;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg) {
+ dev_put(dev);
+ return -ENOMEM;
+ }
+
+ irlap = (struct irlap_cb *)dev->atalk_ptr;
+ if (!irlap) {
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq,
+ &irda_nl_family, 0, IRDA_NL_CMD_GET_MODE);
+ if (hdr == NULL) {
+ ret = -EMSGSIZE;
+ goto err_out;
+ }
+
+ if(nla_put_string(msg, IRDA_NL_ATTR_IFNAME,
+ dev->name))
+ goto err_out;
+
+ if(nla_put_u32(msg, IRDA_NL_ATTR_MODE, irlap->mode))
+ goto err_out;
+
+ genlmsg_end(msg, hdr);
+
+ return genlmsg_reply(msg, info);
+
+ err_out:
+ nlmsg_free(msg);
+ dev_put(dev);
+
+ return ret;
+}
+
+static const struct nla_policy irda_nl_policy[IRDA_NL_ATTR_MAX + 1] = {
+ [IRDA_NL_ATTR_IFNAME] = { .type = NLA_NUL_STRING,
+ .len = IFNAMSIZ-1 },
+ [IRDA_NL_ATTR_MODE] = { .type = NLA_U32 },
+};
+
+static const struct genl_ops irda_nl_ops[] = {
+ {
+ .cmd = IRDA_NL_CMD_SET_MODE,
+ .doit = irda_nl_set_mode,
+ .policy = irda_nl_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = IRDA_NL_CMD_GET_MODE,
+ .doit = irda_nl_get_mode,
+ .policy = irda_nl_policy,
+ /* can be retrieved by unprivileged users */
+ },
+
+};
+
+int irda_nl_register(void)
+{
+ return genl_register_family_with_ops(&irda_nl_family, irda_nl_ops);
+}
+
+void irda_nl_unregister(void)
+{
+ genl_unregister_family(&irda_nl_family);
+}
diff --git a/net/irda/irproc.c b/net/irda/irproc.c
new file mode 100644
index 000000000..b9ac598e2
--- /dev/null
+++ b/net/irda/irproc.c
@@ -0,0 +1,97 @@
+/*********************************************************************
+ *
+ * Filename: irproc.c
+ * Version: 1.0
+ * Description: Various entries in the /proc file system
+ * Status: Experimental.
+ * Author: Thomas Davis, <ratbert@radiks.net>
+ * Created at: Sat Feb 21 21:33:24 1998
+ * Modified at: Sun Nov 14 08:54:54 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999, Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998, Thomas Davis, <ratbert@radiks.net>,
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * I, Thomas Davis, provide no warranty for any of this software.
+ * This material is provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <net/net_namespace.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+
+extern const struct file_operations discovery_seq_fops;
+extern const struct file_operations irlap_seq_fops;
+extern const struct file_operations irlmp_seq_fops;
+extern const struct file_operations irttp_seq_fops;
+extern const struct file_operations irias_seq_fops;
+
+struct irda_entry {
+ const char *name;
+ const struct file_operations *fops;
+};
+
+struct proc_dir_entry *proc_irda;
+EXPORT_SYMBOL(proc_irda);
+
+static const struct irda_entry irda_dirs[] = {
+ {"discovery", &discovery_seq_fops},
+ {"irttp", &irttp_seq_fops},
+ {"irlmp", &irlmp_seq_fops},
+ {"irlap", &irlap_seq_fops},
+ {"irias", &irias_seq_fops},
+};
+
+/*
+ * Function irda_proc_register (void)
+ *
+ * Register irda entry in /proc file system
+ *
+ */
+void __init irda_proc_register(void)
+{
+ int i;
+
+ proc_irda = proc_mkdir("irda", init_net.proc_net);
+ if (proc_irda == NULL)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(irda_dirs); i++)
+ (void) proc_create(irda_dirs[i].name, 0, proc_irda,
+ irda_dirs[i].fops);
+}
+
+/*
+ * Function irda_proc_unregister (void)
+ *
+ * Unregister irda entry in /proc file system
+ *
+ */
+void irda_proc_unregister(void)
+{
+ int i;
+
+ if (proc_irda) {
+ for (i=0; i<ARRAY_SIZE(irda_dirs); i++)
+ remove_proc_entry(irda_dirs[i].name, proc_irda);
+
+ remove_proc_entry("irda", init_net.proc_net);
+ proc_irda = NULL;
+ }
+}
+
+
diff --git a/net/irda/irqueue.c b/net/irda/irqueue.c
new file mode 100644
index 000000000..acbe61c7e
--- /dev/null
+++ b/net/irda/irqueue.c
@@ -0,0 +1,913 @@
+/*********************************************************************
+ *
+ * Filename: irqueue.c
+ * Version: 0.3
+ * Description: General queue implementation
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Jun 9 13:29:31 1998
+ * Modified at: Sun Dec 12 13:48:22 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Modified at: Thu Jan 4 14:29:10 CET 2001
+ * Modified by: Marc Zyngier <mzyngier@freesurf.fr>
+ *
+ * Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no>
+ * Copyright (C) 1998, Dag Brattli,
+ * All Rights Reserved.
+ *
+ * This code is taken from the Vortex Operating System written by Aage
+ * Kvalnes. Aage has agreed that this code can use the GPL licence,
+ * although he does not use that licence in his own code.
+ *
+ * This copyright does however _not_ include the ELF hash() function
+ * which I currently don't know which licence or copyright it
+ * has. Please inform me if you know.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+/*
+ * NOTE :
+ * There are various problems with this package :
+ * o the hash function for ints is pathetic (but could be changed)
+ * o locking is sometime suspicious (especially during enumeration)
+ * o most users have only a few elements (== overhead)
+ * o most users never use search, so don't benefit from hashing
+ * Problem already fixed :
+ * o not 64 bit compliant (most users do hashv = (int) self)
+ * o hashbin_remove() is broken => use hashbin_remove_this()
+ * I think most users would be better served by a simple linked list
+ * (like include/linux/list.h) with a global spinlock per list.
+ * Jean II
+ */
+
+/*
+ * Notes on the concurrent access to hashbin and other SMP issues
+ * -------------------------------------------------------------
+ * Hashbins are very often in the IrDA stack a global repository of
+ * information, and therefore used in a very asynchronous manner following
+ * various events (driver calls, timers, user calls...).
+ * Therefore, very often it is highly important to consider the
+ * management of concurrent access to the hashbin and how to guarantee the
+ * consistency of the operations on it.
+ *
+ * First, we need to define the objective of locking :
+ * 1) Protect user data (content pointed by the hashbin)
+ * 2) Protect hashbin structure itself (linked list in each bin)
+ *
+ * OLD LOCKING
+ * -----------
+ *
+ * The previous locking strategy, either HB_LOCAL or HB_GLOBAL were
+ * both inadequate in *both* aspect.
+ * o HB_GLOBAL was using a spinlock for each bin (local locking).
+ * o HB_LOCAL was disabling irq on *all* CPUs, so use a single
+ * global semaphore.
+ * The problems were :
+ * A) Global irq disabling is no longer supported by the kernel
+ * B) No protection for the hashbin struct global data
+ * o hashbin_delete()
+ * o hb_current
+ * C) No protection for user data in some cases
+ *
+ * A) HB_LOCAL use global irq disabling, so doesn't work on kernel
+ * 2.5.X. Even when it is supported (kernel 2.4.X and earlier), its
+ * performance is not satisfactory on SMP setups. Most hashbins were
+ * HB_LOCAL, so (A) definitely need fixing.
+ * B) HB_LOCAL could be modified to fix (B). However, because HB_GLOBAL
+ * lock only the individual bins, it will never be able to lock the
+ * global data, so can't do (B).
+ * C) Some functions return pointer to data that is still in the
+ * hashbin :
+ * o hashbin_find()
+ * o hashbin_get_first()
+ * o hashbin_get_next()
+ * As the data is still in the hashbin, it may be changed or free'd
+ * while the caller is examinimg the data. In those case, locking can't
+ * be done within the hashbin, but must include use of the data within
+ * the caller.
+ * The caller can easily do this with HB_LOCAL (just disable irqs).
+ * However, this is impossible with HB_GLOBAL because the caller has no
+ * way to know the proper bin, so don't know which spinlock to use.
+ *
+ * Quick summary : can no longer use HB_LOCAL, and HB_GLOBAL is
+ * fundamentally broken and will never work.
+ *
+ * NEW LOCKING
+ * -----------
+ *
+ * To fix those problems, I've introduce a few changes in the
+ * hashbin locking :
+ * 1) New HB_LOCK scheme
+ * 2) hashbin->hb_spinlock
+ * 3) New hashbin usage policy
+ *
+ * HB_LOCK :
+ * -------
+ * HB_LOCK is a locking scheme intermediate between the old HB_LOCAL
+ * and HB_GLOBAL. It uses a single spinlock to protect the whole content
+ * of the hashbin. As it is a single spinlock, it can protect the global
+ * data of the hashbin and not only the bins themselves.
+ * HB_LOCK can only protect some of the hashbin calls, so it only lock
+ * call that can be made 100% safe and leave other call unprotected.
+ * HB_LOCK in theory is slower than HB_GLOBAL, but as the hashbin
+ * content is always small contention is not high, so it doesn't matter
+ * much. HB_LOCK is probably faster than HB_LOCAL.
+ *
+ * hashbin->hb_spinlock :
+ * --------------------
+ * The spinlock that HB_LOCK uses is available for caller, so that
+ * the caller can protect unprotected calls (see below).
+ * If the caller want to do entirely its own locking (HB_NOLOCK), he
+ * can do so and may use safely this spinlock.
+ * Locking is done like this :
+ * spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ * Releasing the lock :
+ * spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ *
+ * Safe & Protected calls :
+ * ----------------------
+ * The following calls are safe or protected via HB_LOCK :
+ * o hashbin_new() -> safe
+ * o hashbin_delete()
+ * o hashbin_insert()
+ * o hashbin_remove_first()
+ * o hashbin_remove()
+ * o hashbin_remove_this()
+ * o HASHBIN_GET_SIZE() -> atomic
+ *
+ * The following calls only protect the hashbin itself :
+ * o hashbin_lock_find()
+ * o hashbin_find_next()
+ *
+ * Unprotected calls :
+ * -----------------
+ * The following calls need to be protected by the caller :
+ * o hashbin_find()
+ * o hashbin_get_first()
+ * o hashbin_get_next()
+ *
+ * Locking Policy :
+ * --------------
+ * If the hashbin is used only in a single thread of execution
+ * (explicitly or implicitely), you can use HB_NOLOCK
+ * If the calling module already provide concurrent access protection,
+ * you may use HB_NOLOCK.
+ *
+ * In all other cases, you need to use HB_LOCK and lock the hashbin
+ * every time before calling one of the unprotected calls. You also must
+ * use the pointer returned by the unprotected call within the locked
+ * region.
+ *
+ * Extra care for enumeration :
+ * --------------------------
+ * hashbin_get_first() and hashbin_get_next() use the hashbin to
+ * store the current position, in hb_current.
+ * As long as the hashbin remains locked, this is safe. If you unlock
+ * the hashbin, the current position may change if anybody else modify
+ * or enumerate the hashbin.
+ * Summary : do the full enumeration while locked.
+ *
+ * Alternatively, you may use hashbin_find_next(). But, this will
+ * be slower, is more complex to use and doesn't protect the hashbin
+ * content. So, care is needed here as well.
+ *
+ * Other issues :
+ * ------------
+ * I believe that we are overdoing it by using spin_lock_irqsave()
+ * and we should use only spin_lock_bh() or similar. But, I don't have
+ * the balls to try it out.
+ * Don't believe that because hashbin are now (somewhat) SMP safe
+ * that the rest of the code is. Higher layers tend to be safest,
+ * but LAP and LMP would need some serious dedicated love.
+ *
+ * Jean II
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+
+/************************ QUEUE SUBROUTINES ************************/
+
+/*
+ * Hashbin
+ */
+#define GET_HASHBIN(x) ( x & HASHBIN_MASK )
+
+/*
+ * Function hash (name)
+ *
+ * This function hash the input string 'name' using the ELF hash
+ * function for strings.
+ */
+static __u32 hash( const char* name)
+{
+ __u32 h = 0;
+ __u32 g;
+
+ while(*name) {
+ h = (h<<4) + *name++;
+ if ((g = (h & 0xf0000000)))
+ h ^=g>>24;
+ h &=~g;
+ }
+ return h;
+}
+
+/*
+ * Function enqueue_first (queue, proc)
+ *
+ * Insert item first in queue.
+ *
+ */
+static void enqueue_first(irda_queue_t **queue, irda_queue_t* element)
+{
+
+ /*
+ * Check if queue is empty.
+ */
+ if ( *queue == NULL ) {
+ /*
+ * Queue is empty. Insert one element into the queue.
+ */
+ element->q_next = element->q_prev = *queue = element;
+
+ } else {
+ /*
+ * Queue is not empty. Insert element into front of queue.
+ */
+ element->q_next = (*queue);
+ (*queue)->q_prev->q_next = element;
+ element->q_prev = (*queue)->q_prev;
+ (*queue)->q_prev = element;
+ (*queue) = element;
+ }
+}
+
+
+/*
+ * Function dequeue (queue)
+ *
+ * Remove first entry in queue
+ *
+ */
+static irda_queue_t *dequeue_first(irda_queue_t **queue)
+{
+ irda_queue_t *ret;
+
+ pr_debug("dequeue_first()\n");
+
+ /*
+ * Set return value
+ */
+ ret = *queue;
+
+ if ( *queue == NULL ) {
+ /*
+ * Queue was empty.
+ */
+ } else if ( (*queue)->q_next == *queue ) {
+ /*
+ * Queue only contained a single element. It will now be
+ * empty.
+ */
+ *queue = NULL;
+ } else {
+ /*
+ * Queue contained several element. Remove the first one.
+ */
+ (*queue)->q_prev->q_next = (*queue)->q_next;
+ (*queue)->q_next->q_prev = (*queue)->q_prev;
+ *queue = (*queue)->q_next;
+ }
+
+ /*
+ * Return the removed entry (or NULL of queue was empty).
+ */
+ return ret;
+}
+
+/*
+ * Function dequeue_general (queue, element)
+ *
+ *
+ */
+static irda_queue_t *dequeue_general(irda_queue_t **queue, irda_queue_t* element)
+{
+ irda_queue_t *ret;
+
+ pr_debug("dequeue_general()\n");
+
+ /*
+ * Set return value
+ */
+ ret = *queue;
+
+ if ( *queue == NULL ) {
+ /*
+ * Queue was empty.
+ */
+ } else if ( (*queue)->q_next == *queue ) {
+ /*
+ * Queue only contained a single element. It will now be
+ * empty.
+ */
+ *queue = NULL;
+
+ } else {
+ /*
+ * Remove specific element.
+ */
+ element->q_prev->q_next = element->q_next;
+ element->q_next->q_prev = element->q_prev;
+ if ( (*queue) == element)
+ (*queue) = element->q_next;
+ }
+
+ /*
+ * Return the removed entry (or NULL of queue was empty).
+ */
+ return ret;
+}
+
+/************************ HASHBIN MANAGEMENT ************************/
+
+/*
+ * Function hashbin_create ( type, name )
+ *
+ * Create hashbin!
+ *
+ */
+hashbin_t *hashbin_new(int type)
+{
+ hashbin_t* hashbin;
+
+ /*
+ * Allocate new hashbin
+ */
+ hashbin = kzalloc(sizeof(*hashbin), GFP_ATOMIC);
+ if (!hashbin)
+ return NULL;
+
+ /*
+ * Initialize structure
+ */
+ hashbin->hb_type = type;
+ hashbin->magic = HB_MAGIC;
+ //hashbin->hb_current = NULL;
+
+ /* Make sure all spinlock's are unlocked */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_init(&hashbin->hb_spinlock);
+ }
+
+ return hashbin;
+}
+EXPORT_SYMBOL(hashbin_new);
+
+
+/*
+ * Function hashbin_delete (hashbin, free_func)
+ *
+ * Destroy hashbin, the free_func can be a user supplied special routine
+ * for deallocating this structure if it's complex. If not the user can
+ * just supply kfree, which should take care of the job.
+ */
+#ifdef CONFIG_LOCKDEP
+static int hashbin_lock_depth = 0;
+#endif
+int hashbin_delete( hashbin_t* hashbin, FREE_FUNC free_func)
+{
+ irda_queue_t* queue;
+ unsigned long flags = 0;
+ int i;
+
+ IRDA_ASSERT(hashbin != NULL, return -1;);
+ IRDA_ASSERT(hashbin->magic == HB_MAGIC, return -1;);
+
+ /* Synchronize */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_irqsave_nested(&hashbin->hb_spinlock, flags,
+ hashbin_lock_depth++);
+ }
+
+ /*
+ * Free the entries in the hashbin, TODO: use hashbin_clear when
+ * it has been shown to work
+ */
+ for (i = 0; i < HASHBIN_SIZE; i ++ ) {
+ queue = dequeue_first((irda_queue_t**) &hashbin->hb_queue[i]);
+ while (queue ) {
+ if (free_func)
+ (*free_func)(queue);
+ queue = dequeue_first(
+ (irda_queue_t**) &hashbin->hb_queue[i]);
+ }
+ }
+
+ /* Cleanup local data */
+ hashbin->hb_current = NULL;
+ hashbin->magic = ~HB_MAGIC;
+
+ /* Release lock */
+ if ( hashbin->hb_type & HB_LOCK) {
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+#ifdef CONFIG_LOCKDEP
+ hashbin_lock_depth--;
+#endif
+ }
+
+ /*
+ * Free the hashbin structure
+ */
+ kfree(hashbin);
+
+ return 0;
+}
+EXPORT_SYMBOL(hashbin_delete);
+
+/********************* HASHBIN LIST OPERATIONS *********************/
+
+/*
+ * Function hashbin_insert (hashbin, entry, name)
+ *
+ * Insert an entry into the hashbin
+ *
+ */
+void hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv,
+ const char* name)
+{
+ unsigned long flags = 0;
+ int bin;
+
+ IRDA_ASSERT( hashbin != NULL, return;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return;);
+
+ /*
+ * Locate hashbin
+ */
+ if ( name )
+ hashv = hash( name );
+ bin = GET_HASHBIN( hashv );
+
+ /* Synchronize */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ /*
+ * Store name and key
+ */
+ entry->q_hash = hashv;
+ if ( name )
+ strlcpy( entry->q_name, name, sizeof(entry->q_name));
+
+ /*
+ * Insert new entry first
+ */
+ enqueue_first( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+ entry);
+ hashbin->hb_size++;
+
+ /* Release lock */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+}
+EXPORT_SYMBOL(hashbin_insert);
+
+/*
+ * Function hashbin_remove_first (hashbin)
+ *
+ * Remove first entry of the hashbin
+ *
+ * Note : this function no longer use hashbin_remove(), but does things
+ * similar to hashbin_remove_this(), so can be considered safe.
+ * Jean II
+ */
+void *hashbin_remove_first( hashbin_t *hashbin)
+{
+ unsigned long flags = 0;
+ irda_queue_t *entry = NULL;
+
+ /* Synchronize */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ entry = hashbin_get_first( hashbin);
+ if ( entry != NULL) {
+ int bin;
+ long hashv;
+ /*
+ * Locate hashbin
+ */
+ hashv = entry->q_hash;
+ bin = GET_HASHBIN( hashv );
+
+ /*
+ * Dequeue the entry...
+ */
+ dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+ entry);
+ hashbin->hb_size--;
+ entry->q_next = NULL;
+ entry->q_prev = NULL;
+
+ /*
+ * Check if this item is the currently selected item, and in
+ * that case we must reset hb_current
+ */
+ if ( entry == hashbin->hb_current)
+ hashbin->hb_current = NULL;
+ }
+
+ /* Release lock */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ return entry;
+}
+
+
+/*
+ * Function hashbin_remove (hashbin, hashv, name)
+ *
+ * Remove entry with the given name
+ *
+ * The use of this function is highly discouraged, because the whole
+ * concept behind hashbin_remove() is broken. In many cases, it's not
+ * possible to guarantee the unicity of the index (either hashv or name),
+ * leading to removing the WRONG entry.
+ * The only simple safe use is :
+ * hashbin_remove(hasbin, (int) self, NULL);
+ * In other case, you must think hard to guarantee unicity of the index.
+ * Jean II
+ */
+void* hashbin_remove( hashbin_t* hashbin, long hashv, const char* name)
+{
+ int bin, found = FALSE;
+ unsigned long flags = 0;
+ irda_queue_t* entry;
+
+ IRDA_ASSERT( hashbin != NULL, return NULL;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+ /*
+ * Locate hashbin
+ */
+ if ( name )
+ hashv = hash( name );
+ bin = GET_HASHBIN( hashv );
+
+ /* Synchronize */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ /*
+ * Search for entry
+ */
+ entry = hashbin->hb_queue[ bin ];
+ if ( entry ) {
+ do {
+ /*
+ * Check for key
+ */
+ if ( entry->q_hash == hashv ) {
+ /*
+ * Name compare too?
+ */
+ if ( name ) {
+ if ( strcmp( entry->q_name, name) == 0)
+ {
+ found = TRUE;
+ break;
+ }
+ } else {
+ found = TRUE;
+ break;
+ }
+ }
+ entry = entry->q_next;
+ } while ( entry != hashbin->hb_queue[ bin ] );
+ }
+
+ /*
+ * If entry was found, dequeue it
+ */
+ if ( found ) {
+ dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+ entry);
+ hashbin->hb_size--;
+
+ /*
+ * Check if this item is the currently selected item, and in
+ * that case we must reset hb_current
+ */
+ if ( entry == hashbin->hb_current)
+ hashbin->hb_current = NULL;
+ }
+
+ /* Release lock */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+
+ /* Return */
+ if ( found )
+ return entry;
+ else
+ return NULL;
+
+}
+EXPORT_SYMBOL(hashbin_remove);
+
+/*
+ * Function hashbin_remove_this (hashbin, entry)
+ *
+ * Remove entry with the given name
+ *
+ * In some cases, the user of hashbin can't guarantee the unicity
+ * of either the hashv or name.
+ * In those cases, using the above function is guaranteed to cause troubles,
+ * so we use this one instead...
+ * And by the way, it's also faster, because we skip the search phase ;-)
+ */
+void* hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry)
+{
+ unsigned long flags = 0;
+ int bin;
+ long hashv;
+
+ IRDA_ASSERT( hashbin != NULL, return NULL;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+ IRDA_ASSERT( entry != NULL, return NULL;);
+
+ /* Synchronize */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ /* Check if valid and not already removed... */
+ if((entry->q_next == NULL) || (entry->q_prev == NULL)) {
+ entry = NULL;
+ goto out;
+ }
+
+ /*
+ * Locate hashbin
+ */
+ hashv = entry->q_hash;
+ bin = GET_HASHBIN( hashv );
+
+ /*
+ * Dequeue the entry...
+ */
+ dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+ entry);
+ hashbin->hb_size--;
+ entry->q_next = NULL;
+ entry->q_prev = NULL;
+
+ /*
+ * Check if this item is the currently selected item, and in
+ * that case we must reset hb_current
+ */
+ if ( entry == hashbin->hb_current)
+ hashbin->hb_current = NULL;
+out:
+ /* Release lock */
+ if ( hashbin->hb_type & HB_LOCK ) {
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ } /* Default is no-lock */
+
+ return entry;
+}
+EXPORT_SYMBOL(hashbin_remove_this);
+
+/*********************** HASHBIN ENUMERATION ***********************/
+
+/*
+ * Function hashbin_common_find (hashbin, hashv, name)
+ *
+ * Find item with the given hashv or name
+ *
+ */
+void* hashbin_find( hashbin_t* hashbin, long hashv, const char* name )
+{
+ int bin;
+ irda_queue_t* entry;
+
+ pr_debug("hashbin_find()\n");
+
+ IRDA_ASSERT( hashbin != NULL, return NULL;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+ /*
+ * Locate hashbin
+ */
+ if ( name )
+ hashv = hash( name );
+ bin = GET_HASHBIN( hashv );
+
+ /*
+ * Search for entry
+ */
+ entry = hashbin->hb_queue[ bin];
+ if ( entry ) {
+ do {
+ /*
+ * Check for key
+ */
+ if ( entry->q_hash == hashv ) {
+ /*
+ * Name compare too?
+ */
+ if ( name ) {
+ if ( strcmp( entry->q_name, name ) == 0 ) {
+ return entry;
+ }
+ } else {
+ return entry;
+ }
+ }
+ entry = entry->q_next;
+ } while ( entry != hashbin->hb_queue[ bin ] );
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(hashbin_find);
+
+/*
+ * Function hashbin_lock_find (hashbin, hashv, name)
+ *
+ * Find item with the given hashv or name
+ *
+ * Same, but with spinlock protection...
+ * I call it safe, but it's only safe with respect to the hashbin, not its
+ * content. - Jean II
+ */
+void* hashbin_lock_find( hashbin_t* hashbin, long hashv, const char* name )
+{
+ unsigned long flags = 0;
+ irda_queue_t* entry;
+
+ /* Synchronize */
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+
+ /*
+ * Search for entry
+ */
+ entry = hashbin_find(hashbin, hashv, name);
+
+ /* Release lock */
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+
+ return entry;
+}
+EXPORT_SYMBOL(hashbin_lock_find);
+
+/*
+ * Function hashbin_find (hashbin, hashv, name, pnext)
+ *
+ * Find an item with the given hashv or name, and its successor
+ *
+ * This function allow to do concurrent enumerations without the
+ * need to lock over the whole session, because the caller keep the
+ * context of the search. On the other hand, it might fail and return
+ * NULL if the entry is removed. - Jean II
+ */
+void* hashbin_find_next( hashbin_t* hashbin, long hashv, const char* name,
+ void ** pnext)
+{
+ unsigned long flags = 0;
+ irda_queue_t* entry;
+
+ /* Synchronize */
+ spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+
+ /*
+ * Search for current entry
+ * This allow to check if the current item is still in the
+ * hashbin or has been removed.
+ */
+ entry = hashbin_find(hashbin, hashv, name);
+
+ /*
+ * Trick hashbin_get_next() to return what we want
+ */
+ if(entry) {
+ hashbin->hb_current = entry;
+ *pnext = hashbin_get_next( hashbin );
+ } else
+ *pnext = NULL;
+
+ /* Release lock */
+ spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+
+ return entry;
+}
+
+/*
+ * Function hashbin_get_first (hashbin)
+ *
+ * Get a pointer to first element in hashbin, this function must be
+ * called before any calls to hashbin_get_next()!
+ *
+ */
+irda_queue_t *hashbin_get_first( hashbin_t* hashbin)
+{
+ irda_queue_t *entry;
+ int i;
+
+ IRDA_ASSERT( hashbin != NULL, return NULL;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+ if ( hashbin == NULL)
+ return NULL;
+
+ for ( i = 0; i < HASHBIN_SIZE; i ++ ) {
+ entry = hashbin->hb_queue[ i];
+ if ( entry) {
+ hashbin->hb_current = entry;
+ return entry;
+ }
+ }
+ /*
+ * Did not find any item in hashbin
+ */
+ return NULL;
+}
+EXPORT_SYMBOL(hashbin_get_first);
+
+/*
+ * Function hashbin_get_next (hashbin)
+ *
+ * Get next item in hashbin. A series of hashbin_get_next() calls must
+ * be started by a call to hashbin_get_first(). The function returns
+ * NULL when all items have been traversed
+ *
+ * The context of the search is stored within the hashbin, so you must
+ * protect yourself from concurrent enumerations. - Jean II
+ */
+irda_queue_t *hashbin_get_next( hashbin_t *hashbin)
+{
+ irda_queue_t* entry;
+ int bin;
+ int i;
+
+ IRDA_ASSERT( hashbin != NULL, return NULL;);
+ IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+ if ( hashbin->hb_current == NULL) {
+ IRDA_ASSERT( hashbin->hb_current != NULL, return NULL;);
+ return NULL;
+ }
+ entry = hashbin->hb_current->q_next;
+ bin = GET_HASHBIN( entry->q_hash);
+
+ /*
+ * Make sure that we are not back at the beginning of the queue
+ * again
+ */
+ if ( entry != hashbin->hb_queue[ bin ]) {
+ hashbin->hb_current = entry;
+
+ return entry;
+ }
+
+ /*
+ * Check that this is not the last queue in hashbin
+ */
+ if ( bin >= HASHBIN_SIZE)
+ return NULL;
+
+ /*
+ * Move to next queue in hashbin
+ */
+ bin++;
+ for ( i = bin; i < HASHBIN_SIZE; i++ ) {
+ entry = hashbin->hb_queue[ i];
+ if ( entry) {
+ hashbin->hb_current = entry;
+
+ return entry;
+ }
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(hashbin_get_next);
diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c
new file mode 100644
index 000000000..873da5e7d
--- /dev/null
+++ b/net/irda/irsysctl.c
@@ -0,0 +1,258 @@
+/*********************************************************************
+ *
+ * Filename: irsysctl.c
+ * Version: 1.0
+ * Description: Sysctl interface for IrDA
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun May 24 22:12:06 1998
+ * Modified at: Fri Jun 4 02:50:15 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1999 Dag Brattli, All Rights Reserved.
+ * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h> /* irda_debug */
+#include <net/irda/irlmp.h>
+#include <net/irda/timer.h>
+#include <net/irda/irias_object.h>
+
+extern int sysctl_discovery;
+extern int sysctl_discovery_slots;
+extern int sysctl_discovery_timeout;
+extern int sysctl_slot_timeout;
+extern int sysctl_fast_poll_increase;
+extern char sysctl_devname[];
+extern int sysctl_max_baud_rate;
+extern unsigned int sysctl_min_tx_turn_time;
+extern unsigned int sysctl_max_tx_data_size;
+extern unsigned int sysctl_max_tx_window;
+extern int sysctl_max_noreply_time;
+extern int sysctl_warn_noreply_time;
+extern int sysctl_lap_keepalive_time;
+
+extern struct irlmp_cb *irlmp;
+
+/* this is needed for the proc_dointvec_minmax - Jean II */
+static int max_discovery_slots = 16; /* ??? */
+static int min_discovery_slots = 1;
+/* IrLAP 6.13.2 says 25ms to 10+70ms - allow higher since some devices
+ * seems to require it. (from Dag's comment) */
+static int max_slot_timeout = 160;
+static int min_slot_timeout = 20;
+static int max_max_baud_rate = 16000000; /* See qos.c - IrLAP spec */
+static int min_max_baud_rate = 2400;
+static int max_min_tx_turn_time = 10000; /* See qos.c - IrLAP spec */
+static int min_min_tx_turn_time;
+static int max_max_tx_data_size = 2048; /* See qos.c - IrLAP spec */
+static int min_max_tx_data_size = 64;
+static int max_max_tx_window = 7; /* See qos.c - IrLAP spec */
+static int min_max_tx_window = 1;
+static int max_max_noreply_time = 40; /* See qos.c - IrLAP spec */
+static int min_max_noreply_time = 3;
+static int max_warn_noreply_time = 3; /* 3s == standard */
+static int min_warn_noreply_time = 1; /* 1s == min WD_TIMER */
+static int max_lap_keepalive_time = 10000; /* 10s */
+static int min_lap_keepalive_time = 100; /* 100us */
+/* For other sysctl, I've no idea of the range. Maybe Dag could help
+ * us on that - Jean II */
+
+static int do_devname(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dostring(table, write, buffer, lenp, ppos);
+ if (ret == 0 && write) {
+ struct ias_value *val;
+
+ val = irias_new_string_value(sysctl_devname);
+ if (val)
+ irias_object_change_attribute("Device", "DeviceName", val);
+ }
+ return ret;
+}
+
+
+static int do_discovery(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (ret)
+ return ret;
+
+ if (irlmp == NULL)
+ return -ENODEV;
+
+ if (sysctl_discovery)
+ irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout*HZ);
+ else
+ del_timer_sync(&irlmp->discovery_timer);
+
+ return ret;
+}
+
+/* One file */
+static struct ctl_table irda_table[] = {
+ {
+ .procname = "discovery",
+ .data = &sysctl_discovery,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = do_discovery,
+ },
+ {
+ .procname = "devname",
+ .data = sysctl_devname,
+ .maxlen = 65,
+ .mode = 0644,
+ .proc_handler = do_devname,
+ },
+#ifdef CONFIG_IRDA_FAST_RR
+ {
+ .procname = "fast_poll_increase",
+ .data = &sysctl_fast_poll_increase,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
+#endif
+ {
+ .procname = "discovery_slots",
+ .data = &sysctl_discovery_slots,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_discovery_slots,
+ .extra2 = &max_discovery_slots
+ },
+ {
+ .procname = "discovery_timeout",
+ .data = &sysctl_discovery_timeout,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec
+ },
+ {
+ .procname = "slot_timeout",
+ .data = &sysctl_slot_timeout,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_slot_timeout,
+ .extra2 = &max_slot_timeout
+ },
+ {
+ .procname = "max_baud_rate",
+ .data = &sysctl_max_baud_rate,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_max_baud_rate,
+ .extra2 = &max_max_baud_rate
+ },
+ {
+ .procname = "min_tx_turn_time",
+ .data = &sysctl_min_tx_turn_time,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_min_tx_turn_time,
+ .extra2 = &max_min_tx_turn_time
+ },
+ {
+ .procname = "max_tx_data_size",
+ .data = &sysctl_max_tx_data_size,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_max_tx_data_size,
+ .extra2 = &max_max_tx_data_size
+ },
+ {
+ .procname = "max_tx_window",
+ .data = &sysctl_max_tx_window,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_max_tx_window,
+ .extra2 = &max_max_tx_window
+ },
+ {
+ .procname = "max_noreply_time",
+ .data = &sysctl_max_noreply_time,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_max_noreply_time,
+ .extra2 = &max_max_noreply_time
+ },
+ {
+ .procname = "warn_noreply_time",
+ .data = &sysctl_warn_noreply_time,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_warn_noreply_time,
+ .extra2 = &max_warn_noreply_time
+ },
+ {
+ .procname = "lap_keepalive_time",
+ .data = &sysctl_lap_keepalive_time,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &min_lap_keepalive_time,
+ .extra2 = &max_lap_keepalive_time
+ },
+ { }
+};
+
+static struct ctl_table_header *irda_table_header;
+
+/*
+ * Function irda_sysctl_register (void)
+ *
+ * Register our sysctl interface
+ *
+ */
+int __init irda_sysctl_register(void)
+{
+ irda_table_header = register_net_sysctl(&init_net, "net/irda", irda_table);
+ if (!irda_table_header)
+ return -ENOMEM;
+
+ return 0;
+}
+
+/*
+ * Function irda_sysctl_unregister (void)
+ *
+ * Unregister our sysctl interface
+ *
+ */
+void irda_sysctl_unregister(void)
+{
+ unregister_net_sysctl_table(irda_table_header);
+}
+
+
+
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
new file mode 100644
index 000000000..b6ab41d5b
--- /dev/null
+++ b/net/irda/irttp.c
@@ -0,0 +1,1891 @@
+/*********************************************************************
+ *
+ * Filename: irttp.c
+ * Version: 1.2
+ * Description: Tiny Transport Protocol (TTP) implementation
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sun Aug 31 20:14:31 1997
+ * Modified at: Wed Jan 5 11:31:27 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/parameters.h>
+#include <net/irda/irttp.h>
+
+static struct irttp_cb *irttp;
+
+static void __irttp_close_tsap(struct tsap_cb *self);
+
+static int irttp_data_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static int irttp_udata_indication(void *instance, void *sap,
+ struct sk_buff *skb);
+static void irttp_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason, struct sk_buff *);
+static void irttp_connect_indication(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_sdu_size,
+ __u8 header_size, struct sk_buff *skb);
+static void irttp_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_sdu_size,
+ __u8 header_size, struct sk_buff *skb);
+static void irttp_run_tx_queue(struct tsap_cb *self);
+static void irttp_run_rx_queue(struct tsap_cb *self);
+
+static void irttp_flush_queues(struct tsap_cb *self);
+static void irttp_fragment_skb(struct tsap_cb *self, struct sk_buff *skb);
+static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self);
+static void irttp_todo_expired(unsigned long data);
+static int irttp_param_max_sdu_size(void *instance, irda_param_t *param,
+ int get);
+
+static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow);
+static void irttp_status_indication(void *instance,
+ LINK_STATUS link, LOCK_STATUS lock);
+
+/* Information for parsing parameters in IrTTP */
+static const pi_minor_info_t pi_minor_call_table[] = {
+ { NULL, 0 }, /* 0x00 */
+ { irttp_param_max_sdu_size, PV_INTEGER | PV_BIG_ENDIAN } /* 0x01 */
+};
+static const pi_major_info_t pi_major_call_table[] = {
+ { pi_minor_call_table, 2 }
+};
+static pi_param_info_t param_info = { pi_major_call_table, 1, 0x0f, 4 };
+
+/************************ GLOBAL PROCEDURES ************************/
+
+/*
+ * Function irttp_init (void)
+ *
+ * Initialize the IrTTP layer. Called by module initialization code
+ *
+ */
+int __init irttp_init(void)
+{
+ irttp = kzalloc(sizeof(struct irttp_cb), GFP_KERNEL);
+ if (irttp == NULL)
+ return -ENOMEM;
+
+ irttp->magic = TTP_MAGIC;
+
+ irttp->tsaps = hashbin_new(HB_LOCK);
+ if (!irttp->tsaps) {
+ net_err_ratelimited("%s: can't allocate IrTTP hashbin!\n",
+ __func__);
+ kfree(irttp);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/*
+ * Function irttp_cleanup (void)
+ *
+ * Called by module destruction/cleanup code
+ *
+ */
+void irttp_cleanup(void)
+{
+ /* Check for main structure */
+ IRDA_ASSERT(irttp->magic == TTP_MAGIC, return;);
+
+ /*
+ * Delete hashbin and close all TSAP instances in it
+ */
+ hashbin_delete(irttp->tsaps, (FREE_FUNC) __irttp_close_tsap);
+
+ irttp->magic = 0;
+
+ /* De-allocate main structure */
+ kfree(irttp);
+
+ irttp = NULL;
+}
+
+/*************************** SUBROUTINES ***************************/
+
+/*
+ * Function irttp_start_todo_timer (self, timeout)
+ *
+ * Start todo timer.
+ *
+ * Made it more effient and unsensitive to race conditions - Jean II
+ */
+static inline void irttp_start_todo_timer(struct tsap_cb *self, int timeout)
+{
+ /* Set new value for timer */
+ mod_timer(&self->todo_timer, jiffies + timeout);
+}
+
+/*
+ * Function irttp_todo_expired (data)
+ *
+ * Todo timer has expired!
+ *
+ * One of the restriction of the timer is that it is run only on the timer
+ * interrupt which run every 10ms. This mean that even if you set the timer
+ * with a delay of 0, it may take up to 10ms before it's run.
+ * So, to minimise latency and keep cache fresh, we try to avoid using
+ * it as much as possible.
+ * Note : we can't use tasklets, because they can't be asynchronously
+ * killed (need user context), and we can't guarantee that here...
+ * Jean II
+ */
+static void irttp_todo_expired(unsigned long data)
+{
+ struct tsap_cb *self = (struct tsap_cb *) data;
+
+ /* Check that we still exist */
+ if (!self || self->magic != TTP_TSAP_MAGIC)
+ return;
+
+ pr_debug("%s(instance=%p)\n", __func__, self);
+
+ /* Try to make some progress, especially on Tx side - Jean II */
+ irttp_run_rx_queue(self);
+ irttp_run_tx_queue(self);
+
+ /* Check if time for disconnect */
+ if (test_bit(0, &self->disconnect_pend)) {
+ /* Check if it's possible to disconnect yet */
+ if (skb_queue_empty(&self->tx_queue)) {
+ /* Make sure disconnect is not pending anymore */
+ clear_bit(0, &self->disconnect_pend); /* FALSE */
+
+ /* Note : self->disconnect_skb may be NULL */
+ irttp_disconnect_request(self, self->disconnect_skb,
+ P_NORMAL);
+ self->disconnect_skb = NULL;
+ } else {
+ /* Try again later */
+ irttp_start_todo_timer(self, HZ/10);
+
+ /* No reason to try and close now */
+ return;
+ }
+ }
+
+ /* Check if it's closing time */
+ if (self->close_pend)
+ /* Finish cleanup */
+ irttp_close_tsap(self);
+}
+
+/*
+ * Function irttp_flush_queues (self)
+ *
+ * Flushes (removes all frames) in transitt-buffer (tx_list)
+ */
+static void irttp_flush_queues(struct tsap_cb *self)
+{
+ struct sk_buff *skb;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ /* Deallocate frames waiting to be sent */
+ while ((skb = skb_dequeue(&self->tx_queue)) != NULL)
+ dev_kfree_skb(skb);
+
+ /* Deallocate received frames */
+ while ((skb = skb_dequeue(&self->rx_queue)) != NULL)
+ dev_kfree_skb(skb);
+
+ /* Deallocate received fragments */
+ while ((skb = skb_dequeue(&self->rx_fragments)) != NULL)
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_reassemble (self)
+ *
+ * Makes a new (continuous) skb of all the fragments in the fragment
+ * queue
+ *
+ */
+static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self)
+{
+ struct sk_buff *skb, *frag;
+ int n = 0; /* Fragment index */
+
+ IRDA_ASSERT(self != NULL, return NULL;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return NULL;);
+
+ pr_debug("%s(), self->rx_sdu_size=%d\n", __func__,
+ self->rx_sdu_size);
+
+ skb = dev_alloc_skb(TTP_HEADER + self->rx_sdu_size);
+ if (!skb)
+ return NULL;
+
+ /*
+ * Need to reserve space for TTP header in case this skb needs to
+ * be requeued in case delivery failes
+ */
+ skb_reserve(skb, TTP_HEADER);
+ skb_put(skb, self->rx_sdu_size);
+
+ /*
+ * Copy all fragments to a new buffer
+ */
+ while ((frag = skb_dequeue(&self->rx_fragments)) != NULL) {
+ skb_copy_to_linear_data_offset(skb, n, frag->data, frag->len);
+ n += frag->len;
+
+ dev_kfree_skb(frag);
+ }
+
+ pr_debug("%s(), frame len=%d, rx_sdu_size=%d, rx_max_sdu_size=%d\n",
+ __func__, n, self->rx_sdu_size, self->rx_max_sdu_size);
+ /* Note : irttp_run_rx_queue() calculate self->rx_sdu_size
+ * by summing the size of all fragments, so we should always
+ * have n == self->rx_sdu_size, except in cases where we
+ * droped the last fragment (when self->rx_sdu_size exceed
+ * self->rx_max_sdu_size), where n < self->rx_sdu_size.
+ * Jean II */
+ IRDA_ASSERT(n <= self->rx_sdu_size, n = self->rx_sdu_size;);
+
+ /* Set the new length */
+ skb_trim(skb, n);
+
+ self->rx_sdu_size = 0;
+
+ return skb;
+}
+
+/*
+ * Function irttp_fragment_skb (skb)
+ *
+ * Fragments a frame and queues all the fragments for transmission
+ *
+ */
+static inline void irttp_fragment_skb(struct tsap_cb *self,
+ struct sk_buff *skb)
+{
+ struct sk_buff *frag;
+ __u8 *frame;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ /*
+ * Split frame into a number of segments
+ */
+ while (skb->len > self->max_seg_size) {
+ pr_debug("%s(), fragmenting ...\n", __func__);
+
+ /* Make new segment */
+ frag = alloc_skb(self->max_seg_size+self->max_header_size,
+ GFP_ATOMIC);
+ if (!frag)
+ return;
+
+ skb_reserve(frag, self->max_header_size);
+
+ /* Copy data from the original skb into this fragment. */
+ skb_copy_from_linear_data(skb, skb_put(frag, self->max_seg_size),
+ self->max_seg_size);
+
+ /* Insert TTP header, with the more bit set */
+ frame = skb_push(frag, TTP_HEADER);
+ frame[0] = TTP_MORE;
+
+ /* Hide the copied data from the original skb */
+ skb_pull(skb, self->max_seg_size);
+
+ /* Queue fragment */
+ skb_queue_tail(&self->tx_queue, frag);
+ }
+ /* Queue what is left of the original skb */
+ pr_debug("%s(), queuing last segment\n", __func__);
+
+ frame = skb_push(skb, TTP_HEADER);
+ frame[0] = 0x00; /* Clear more bit */
+
+ /* Queue fragment */
+ skb_queue_tail(&self->tx_queue, skb);
+}
+
+/*
+ * Function irttp_param_max_sdu_size (self, param)
+ *
+ * Handle the MaxSduSize parameter in the connect frames, this function
+ * will be called both when this parameter needs to be inserted into, and
+ * extracted from the connect frames
+ */
+static int irttp_param_max_sdu_size(void *instance, irda_param_t *param,
+ int get)
+{
+ struct tsap_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->tx_max_sdu_size;
+ else
+ self->tx_max_sdu_size = param->pv.i;
+
+ pr_debug("%s(), MaxSduSize=%d\n", __func__, param->pv.i);
+
+ return 0;
+}
+
+/*************************** CLIENT CALLS ***************************/
+/************************** LMP CALLBACKS **************************/
+/* Everything is happily mixed up. Waiting for next clean up - Jean II */
+
+/*
+ * Initialization, that has to be done on new tsap
+ * instance allocation and on duplication
+ */
+static void irttp_init_tsap(struct tsap_cb *tsap)
+{
+ spin_lock_init(&tsap->lock);
+ init_timer(&tsap->todo_timer);
+
+ skb_queue_head_init(&tsap->rx_queue);
+ skb_queue_head_init(&tsap->tx_queue);
+ skb_queue_head_init(&tsap->rx_fragments);
+}
+
+/*
+ * Function irttp_open_tsap (stsap, notify)
+ *
+ * Create TSAP connection endpoint,
+ */
+struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify)
+{
+ struct tsap_cb *self;
+ struct lsap_cb *lsap;
+ notify_t ttp_notify;
+
+ IRDA_ASSERT(irttp->magic == TTP_MAGIC, return NULL;);
+
+ /* The IrLMP spec (IrLMP 1.1 p10) says that we have the right to
+ * use only 0x01-0x6F. Of course, we can use LSAP_ANY as well.
+ * JeanII */
+ if ((stsap_sel != LSAP_ANY) &&
+ ((stsap_sel < 0x01) || (stsap_sel >= 0x70))) {
+ pr_debug("%s(), invalid tsap!\n", __func__);
+ return NULL;
+ }
+
+ self = kzalloc(sizeof(struct tsap_cb), GFP_ATOMIC);
+ if (self == NULL)
+ return NULL;
+
+ /* Initialize internal objects */
+ irttp_init_tsap(self);
+
+ /* Initialise todo timer */
+ self->todo_timer.data = (unsigned long) self;
+ self->todo_timer.function = &irttp_todo_expired;
+
+ /* Initialize callbacks for IrLMP to use */
+ irda_notify_init(&ttp_notify);
+ ttp_notify.connect_confirm = irttp_connect_confirm;
+ ttp_notify.connect_indication = irttp_connect_indication;
+ ttp_notify.disconnect_indication = irttp_disconnect_indication;
+ ttp_notify.data_indication = irttp_data_indication;
+ ttp_notify.udata_indication = irttp_udata_indication;
+ ttp_notify.flow_indication = irttp_flow_indication;
+ if (notify->status_indication != NULL)
+ ttp_notify.status_indication = irttp_status_indication;
+ ttp_notify.instance = self;
+ strncpy(ttp_notify.name, notify->name, NOTIFY_MAX_NAME);
+
+ self->magic = TTP_TSAP_MAGIC;
+ self->connected = FALSE;
+
+ /*
+ * Create LSAP at IrLMP layer
+ */
+ lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0);
+ if (lsap == NULL) {
+ pr_debug("%s: unable to allocate LSAP!!\n", __func__);
+ __irttp_close_tsap(self);
+ return NULL;
+ }
+
+ /*
+ * If user specified LSAP_ANY as source TSAP selector, then IrLMP
+ * will replace it with whatever source selector which is free, so
+ * the stsap_sel we have might not be valid anymore
+ */
+ self->stsap_sel = lsap->slsap_sel;
+ pr_debug("%s(), stsap_sel=%02x\n", __func__, self->stsap_sel);
+
+ self->notify = *notify;
+ self->lsap = lsap;
+
+ hashbin_insert(irttp->tsaps, (irda_queue_t *) self, (long) self, NULL);
+
+ if (credit > TTP_RX_MAX_CREDIT)
+ self->initial_credit = TTP_RX_MAX_CREDIT;
+ else
+ self->initial_credit = credit;
+
+ return self;
+}
+EXPORT_SYMBOL(irttp_open_tsap);
+
+/*
+ * Function irttp_close (handle)
+ *
+ * Remove an instance of a TSAP. This function should only deal with the
+ * deallocation of the TSAP, and resetting of the TSAPs values;
+ *
+ */
+static void __irttp_close_tsap(struct tsap_cb *self)
+{
+ /* First make sure we're connected. */
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ irttp_flush_queues(self);
+
+ del_timer(&self->todo_timer);
+
+ /* This one won't be cleaned up if we are disconnect_pend + close_pend
+ * and we receive a disconnect_indication */
+ if (self->disconnect_skb)
+ dev_kfree_skb(self->disconnect_skb);
+
+ self->connected = FALSE;
+ self->magic = ~TTP_TSAP_MAGIC;
+
+ kfree(self);
+}
+
+/*
+ * Function irttp_close (self)
+ *
+ * Remove TSAP from list of all TSAPs and then deallocate all resources
+ * associated with this TSAP
+ *
+ * Note : because we *free* the tsap structure, it is the responsibility
+ * of the caller to make sure we are called only once and to deal with
+ * possible race conditions. - Jean II
+ */
+int irttp_close_tsap(struct tsap_cb *self)
+{
+ struct tsap_cb *tsap;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+ /* Make sure tsap has been disconnected */
+ if (self->connected) {
+ /* Check if disconnect is not pending */
+ if (!test_bit(0, &self->disconnect_pend)) {
+ net_warn_ratelimited("%s: TSAP still connected!\n",
+ __func__);
+ irttp_disconnect_request(self, NULL, P_NORMAL);
+ }
+ self->close_pend = TRUE;
+ irttp_start_todo_timer(self, HZ/10);
+
+ return 0; /* Will be back! */
+ }
+
+ tsap = hashbin_remove(irttp->tsaps, (long) self, NULL);
+
+ IRDA_ASSERT(tsap == self, return -1;);
+
+ /* Close corresponding LSAP */
+ if (self->lsap) {
+ irlmp_close_lsap(self->lsap);
+ self->lsap = NULL;
+ }
+
+ __irttp_close_tsap(self);
+
+ return 0;
+}
+EXPORT_SYMBOL(irttp_close_tsap);
+
+/*
+ * Function irttp_udata_request (self, skb)
+ *
+ * Send unreliable data on this TSAP
+ *
+ */
+int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ /* Take shortcut on zero byte packets */
+ if (skb->len == 0) {
+ ret = 0;
+ goto err;
+ }
+
+ /* Check that nothing bad happens */
+ if (!self->connected) {
+ net_warn_ratelimited("%s(), Not connected\n", __func__);
+ ret = -ENOTCONN;
+ goto err;
+ }
+
+ if (skb->len > self->max_seg_size) {
+ net_err_ratelimited("%s(), UData is too large for IrLAP!\n",
+ __func__);
+ ret = -EMSGSIZE;
+ goto err;
+ }
+
+ irlmp_udata_request(self->lsap, skb);
+ self->stats.tx_packets++;
+
+ return 0;
+
+err:
+ dev_kfree_skb(skb);
+ return ret;
+}
+EXPORT_SYMBOL(irttp_udata_request);
+
+
+/*
+ * Function irttp_data_request (handle, skb)
+ *
+ * Queue frame for transmission. If SAR is enabled, fragement the frame
+ * and queue the fragments for transmission
+ */
+int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb)
+{
+ __u8 *frame;
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ pr_debug("%s() : queue len = %d\n", __func__,
+ skb_queue_len(&self->tx_queue));
+
+ /* Take shortcut on zero byte packets */
+ if (skb->len == 0) {
+ ret = 0;
+ goto err;
+ }
+
+ /* Check that nothing bad happens */
+ if (!self->connected) {
+ net_warn_ratelimited("%s: Not connected\n", __func__);
+ ret = -ENOTCONN;
+ goto err;
+ }
+
+ /*
+ * Check if SAR is disabled, and the frame is larger than what fits
+ * inside an IrLAP frame
+ */
+ if ((self->tx_max_sdu_size == 0) && (skb->len > self->max_seg_size)) {
+ net_err_ratelimited("%s: SAR disabled, and data is too large for IrLAP!\n",
+ __func__);
+ ret = -EMSGSIZE;
+ goto err;
+ }
+
+ /*
+ * Check if SAR is enabled, and the frame is larger than the
+ * TxMaxSduSize
+ */
+ if ((self->tx_max_sdu_size != 0) &&
+ (self->tx_max_sdu_size != TTP_SAR_UNBOUND) &&
+ (skb->len > self->tx_max_sdu_size)) {
+ net_err_ratelimited("%s: SAR enabled, but data is larger than TxMaxSduSize!\n",
+ __func__);
+ ret = -EMSGSIZE;
+ goto err;
+ }
+ /*
+ * Check if transmit queue is full
+ */
+ if (skb_queue_len(&self->tx_queue) >= TTP_TX_MAX_QUEUE) {
+ /*
+ * Give it a chance to empty itself
+ */
+ irttp_run_tx_queue(self);
+
+ /* Drop packet. This error code should trigger the caller
+ * to resend the data in the client code - Jean II */
+ ret = -ENOBUFS;
+ goto err;
+ }
+
+ /* Queue frame, or queue frame segments */
+ if ((self->tx_max_sdu_size == 0) || (skb->len < self->max_seg_size)) {
+ /* Queue frame */
+ IRDA_ASSERT(skb_headroom(skb) >= TTP_HEADER, return -1;);
+ frame = skb_push(skb, TTP_HEADER);
+ frame[0] = 0x00; /* Clear more bit */
+
+ skb_queue_tail(&self->tx_queue, skb);
+ } else {
+ /*
+ * Fragment the frame, this function will also queue the
+ * fragments, we don't care about the fact the transmit
+ * queue may be overfilled by all the segments for a little
+ * while
+ */
+ irttp_fragment_skb(self, skb);
+ }
+
+ /* Check if we can accept more data from client */
+ if ((!self->tx_sdu_busy) &&
+ (skb_queue_len(&self->tx_queue) > TTP_TX_HIGH_THRESHOLD)) {
+ /* Tx queue filling up, so stop client. */
+ if (self->notify.flow_indication) {
+ self->notify.flow_indication(self->notify.instance,
+ self, FLOW_STOP);
+ }
+ /* self->tx_sdu_busy is the state of the client.
+ * Update state after notifying client to avoid
+ * race condition with irttp_flow_indication().
+ * If the queue empty itself after our test but before
+ * we set the flag, we will fix ourselves below in
+ * irttp_run_tx_queue().
+ * Jean II */
+ self->tx_sdu_busy = TRUE;
+ }
+
+ /* Try to make some progress */
+ irttp_run_tx_queue(self);
+
+ return 0;
+
+err:
+ dev_kfree_skb(skb);
+ return ret;
+}
+EXPORT_SYMBOL(irttp_data_request);
+
+/*
+ * Function irttp_run_tx_queue (self)
+ *
+ * Transmit packets queued for transmission (if possible)
+ *
+ */
+static void irttp_run_tx_queue(struct tsap_cb *self)
+{
+ struct sk_buff *skb;
+ unsigned long flags;
+ int n;
+
+ pr_debug("%s() : send_credit = %d, queue_len = %d\n",
+ __func__,
+ self->send_credit, skb_queue_len(&self->tx_queue));
+
+ /* Get exclusive access to the tx queue, otherwise don't touch it */
+ if (irda_lock(&self->tx_queue_lock) == FALSE)
+ return;
+
+ /* Try to send out frames as long as we have credits
+ * and as long as LAP is not full. If LAP is full, it will
+ * poll us through irttp_flow_indication() - Jean II */
+ while ((self->send_credit > 0) &&
+ (!irlmp_lap_tx_queue_full(self->lsap)) &&
+ (skb = skb_dequeue(&self->tx_queue))) {
+ /*
+ * Since we can transmit and receive frames concurrently,
+ * the code below is a critical region and we must assure that
+ * nobody messes with the credits while we update them.
+ */
+ spin_lock_irqsave(&self->lock, flags);
+
+ n = self->avail_credit;
+ self->avail_credit = 0;
+
+ /* Only room for 127 credits in frame */
+ if (n > 127) {
+ self->avail_credit = n-127;
+ n = 127;
+ }
+ self->remote_credit += n;
+ self->send_credit--;
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /*
+ * More bit must be set by the data_request() or fragment()
+ * functions
+ */
+ skb->data[0] |= (n & 0x7f);
+
+ /* Detach from socket.
+ * The current skb has a reference to the socket that sent
+ * it (skb->sk). When we pass it to IrLMP, the skb will be
+ * stored in in IrLAP (self->wx_list). When we are within
+ * IrLAP, we lose the notion of socket, so we should not
+ * have a reference to a socket. So, we drop it here.
+ *
+ * Why does it matter ?
+ * When the skb is freed (kfree_skb), if it is associated
+ * with a socket, it release buffer space on the socket
+ * (through sock_wfree() and sock_def_write_space()).
+ * If the socket no longer exist, we may crash. Hard.
+ * When we close a socket, we make sure that associated packets
+ * in IrTTP are freed. However, we have no way to cancel
+ * the packet that we have passed to IrLAP. So, if a packet
+ * remains in IrLAP (retry on the link or else) after we
+ * close the socket, we are dead !
+ * Jean II */
+ if (skb->sk != NULL) {
+ /* IrSOCK application, IrOBEX, ... */
+ skb_orphan(skb);
+ }
+ /* IrCOMM over IrTTP, IrLAN, ... */
+
+ /* Pass the skb to IrLMP - done */
+ irlmp_data_request(self->lsap, skb);
+ self->stats.tx_packets++;
+ }
+
+ /* Check if we can accept more frames from client.
+ * We don't want to wait until the todo timer to do that, and we
+ * can't use tasklets (grr...), so we are obliged to give control
+ * to client. That's ok, this test will be true not too often
+ * (max once per LAP window) and we are called from places
+ * where we can spend a bit of time doing stuff. - Jean II */
+ if ((self->tx_sdu_busy) &&
+ (skb_queue_len(&self->tx_queue) < TTP_TX_LOW_THRESHOLD) &&
+ (!self->close_pend)) {
+ if (self->notify.flow_indication)
+ self->notify.flow_indication(self->notify.instance,
+ self, FLOW_START);
+
+ /* self->tx_sdu_busy is the state of the client.
+ * We don't really have a race here, but it's always safer
+ * to update our state after the client - Jean II */
+ self->tx_sdu_busy = FALSE;
+ }
+
+ /* Reset lock */
+ self->tx_queue_lock = 0;
+}
+
+/*
+ * Function irttp_give_credit (self)
+ *
+ * Send a dataless flowdata TTP-PDU and give available credit to peer
+ * TSAP
+ */
+static inline void irttp_give_credit(struct tsap_cb *self)
+{
+ struct sk_buff *tx_skb = NULL;
+ unsigned long flags;
+ int n;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ pr_debug("%s() send=%d,avail=%d,remote=%d\n",
+ __func__,
+ self->send_credit, self->avail_credit, self->remote_credit);
+
+ /* Give credit to peer */
+ tx_skb = alloc_skb(TTP_MAX_HEADER, GFP_ATOMIC);
+ if (!tx_skb)
+ return;
+
+ /* Reserve space for LMP, and LAP header */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+ /*
+ * Since we can transmit and receive frames concurrently,
+ * the code below is a critical region and we must assure that
+ * nobody messes with the credits while we update them.
+ */
+ spin_lock_irqsave(&self->lock, flags);
+
+ n = self->avail_credit;
+ self->avail_credit = 0;
+
+ /* Only space for 127 credits in frame */
+ if (n > 127) {
+ self->avail_credit = n - 127;
+ n = 127;
+ }
+ self->remote_credit += n;
+
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ skb_put(tx_skb, 1);
+ tx_skb->data[0] = (__u8) (n & 0x7f);
+
+ irlmp_data_request(self->lsap, tx_skb);
+ self->stats.tx_packets++;
+}
+
+/*
+ * Function irttp_udata_indication (instance, sap, skb)
+ *
+ * Received some unit-data (unreliable)
+ *
+ */
+static int irttp_udata_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct tsap_cb *self;
+ int err;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+ IRDA_ASSERT(skb != NULL, return -1;);
+
+ self->stats.rx_packets++;
+
+ /* Just pass data to layer above */
+ if (self->notify.udata_indication) {
+ err = self->notify.udata_indication(self->notify.instance,
+ self, skb);
+ /* Same comment as in irttp_do_data_indication() */
+ if (!err)
+ return 0;
+ }
+ /* Either no handler, or handler returns an error */
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+/*
+ * Function irttp_data_indication (instance, sap, skb)
+ *
+ * Receive segment from IrLMP.
+ *
+ */
+static int irttp_data_indication(void *instance, void *sap,
+ struct sk_buff *skb)
+{
+ struct tsap_cb *self;
+ unsigned long flags;
+ int n;
+
+ self = instance;
+
+ n = skb->data[0] & 0x7f; /* Extract the credits */
+
+ self->stats.rx_packets++;
+
+ /* Deal with inbound credit
+ * Since we can transmit and receive frames concurrently,
+ * the code below is a critical region and we must assure that
+ * nobody messes with the credits while we update them.
+ */
+ spin_lock_irqsave(&self->lock, flags);
+ self->send_credit += n;
+ if (skb->len > 1)
+ self->remote_credit--;
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /*
+ * Data or dataless packet? Dataless frames contains only the
+ * TTP_HEADER.
+ */
+ if (skb->len > 1) {
+ /*
+ * We don't remove the TTP header, since we must preserve the
+ * more bit, so the defragment routing knows what to do
+ */
+ skb_queue_tail(&self->rx_queue, skb);
+ } else {
+ /* Dataless flowdata TTP-PDU */
+ dev_kfree_skb(skb);
+ }
+
+
+ /* Push data to the higher layer.
+ * We do it synchronously because running the todo timer for each
+ * receive packet would be too much overhead and latency.
+ * By passing control to the higher layer, we run the risk that
+ * it may take time or grab a lock. Most often, the higher layer
+ * will only put packet in a queue.
+ * Anyway, packets are only dripping through the IrDA, so we can
+ * have time before the next packet.
+ * Further, we are run from NET_BH, so the worse that can happen is
+ * us missing the optimal time to send back the PF bit in LAP.
+ * Jean II */
+ irttp_run_rx_queue(self);
+
+ /* We now give credits to peer in irttp_run_rx_queue().
+ * We need to send credit *NOW*, otherwise we are going
+ * to miss the next Tx window. The todo timer may take
+ * a while before it's run... - Jean II */
+
+ /*
+ * If the peer device has given us some credits and we didn't have
+ * anyone from before, then we need to shedule the tx queue.
+ * We need to do that because our Tx have stopped (so we may not
+ * get any LAP flow indication) and the user may be stopped as
+ * well. - Jean II
+ */
+ if (self->send_credit == n) {
+ /* Restart pushing stuff to LAP */
+ irttp_run_tx_queue(self);
+ /* Note : we don't want to schedule the todo timer
+ * because it has horrible latency. No tasklets
+ * because the tasklet API is broken. - Jean II */
+ }
+
+ return 0;
+}
+
+/*
+ * Function irttp_status_indication (self, reason)
+ *
+ * Status_indication, just pass to the higher layer...
+ *
+ */
+static void irttp_status_indication(void *instance,
+ LINK_STATUS link, LOCK_STATUS lock)
+{
+ struct tsap_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ /* Check if client has already closed the TSAP and gone away */
+ if (self->close_pend)
+ return;
+
+ /*
+ * Inform service user if he has requested it
+ */
+ if (self->notify.status_indication != NULL)
+ self->notify.status_indication(self->notify.instance,
+ link, lock);
+ else
+ pr_debug("%s(), no handler\n", __func__);
+}
+
+/*
+ * Function irttp_flow_indication (self, reason)
+ *
+ * Flow_indication : IrLAP tells us to send more data.
+ *
+ */
+static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+ struct tsap_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ pr_debug("%s(instance=%p)\n", __func__, self);
+
+ /* We are "polled" directly from LAP, and the LAP want to fill
+ * its Tx window. We want to do our best to send it data, so that
+ * we maximise the window. On the other hand, we want to limit the
+ * amount of work here so that LAP doesn't hang forever waiting
+ * for packets. - Jean II */
+
+ /* Try to send some packets. Currently, LAP calls us every time
+ * there is one free slot, so we will send only one packet.
+ * This allow the scheduler to do its round robin - Jean II */
+ irttp_run_tx_queue(self);
+
+ /* Note regarding the interraction with higher layer.
+ * irttp_run_tx_queue() may call the client when its queue
+ * start to empty, via notify.flow_indication(). Initially.
+ * I wanted this to happen in a tasklet, to avoid client
+ * grabbing the CPU, but we can't use tasklets safely. And timer
+ * is definitely too slow.
+ * This will happen only once per LAP window, and usually at
+ * the third packet (unless window is smaller). LAP is still
+ * doing mtt and sending first packet so it's sort of OK
+ * to do that. Jean II */
+
+ /* If we need to send disconnect. try to do it now */
+ if (self->disconnect_pend)
+ irttp_start_todo_timer(self, 0);
+}
+
+/*
+ * Function irttp_flow_request (self, command)
+ *
+ * This function could be used by the upper layers to tell IrTTP to stop
+ * delivering frames if the receive queues are starting to get full, or
+ * to tell IrTTP to start delivering frames again.
+ */
+void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow)
+{
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ switch (flow) {
+ case FLOW_STOP:
+ pr_debug("%s(), flow stop\n", __func__);
+ self->rx_sdu_busy = TRUE;
+ break;
+ case FLOW_START:
+ pr_debug("%s(), flow start\n", __func__);
+ self->rx_sdu_busy = FALSE;
+
+ /* Client say he can accept more data, try to free our
+ * queues ASAP - Jean II */
+ irttp_run_rx_queue(self);
+
+ break;
+ default:
+ pr_debug("%s(), Unknown flow command!\n", __func__);
+ }
+}
+EXPORT_SYMBOL(irttp_flow_request);
+
+/*
+ * Function irttp_connect_request (self, dtsap_sel, daddr, qos)
+ *
+ * Try to connect to remote destination TSAP selector
+ *
+ */
+int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel,
+ __u32 saddr, __u32 daddr,
+ struct qos_info *qos, __u32 max_sdu_size,
+ struct sk_buff *userdata)
+{
+ struct sk_buff *tx_skb;
+ __u8 *frame;
+ __u8 n;
+
+ pr_debug("%s(), max_sdu_size=%d\n", __func__, max_sdu_size);
+
+ IRDA_ASSERT(self != NULL, return -EBADR;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -EBADR;);
+
+ if (self->connected) {
+ if (userdata)
+ dev_kfree_skb(userdata);
+ return -EISCONN;
+ }
+
+ /* Any userdata supplied? */
+ if (userdata == NULL) {
+ tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /* Reserve space for MUX_CONTROL and LAP header */
+ skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER);
+ } else {
+ tx_skb = userdata;
+ /*
+ * Check that the client has reserved enough space for
+ * headers
+ */
+ IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER,
+ { dev_kfree_skb(userdata); return -1; });
+ }
+
+ /* Initialize connection parameters */
+ self->connected = FALSE;
+ self->avail_credit = 0;
+ self->rx_max_sdu_size = max_sdu_size;
+ self->rx_sdu_size = 0;
+ self->rx_sdu_busy = FALSE;
+ self->dtsap_sel = dtsap_sel;
+
+ n = self->initial_credit;
+
+ self->remote_credit = 0;
+ self->send_credit = 0;
+
+ /*
+ * Give away max 127 credits for now
+ */
+ if (n > 127) {
+ self->avail_credit = n - 127;
+ n = 127;
+ }
+
+ self->remote_credit = n;
+
+ /* SAR enabled? */
+ if (max_sdu_size > 0) {
+ IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER),
+ { dev_kfree_skb(tx_skb); return -1; });
+
+ /* Insert SAR parameters */
+ frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER);
+
+ frame[0] = TTP_PARAMETERS | n;
+ frame[1] = 0x04; /* Length */
+ frame[2] = 0x01; /* MaxSduSize */
+ frame[3] = 0x02; /* Value length */
+
+ put_unaligned(cpu_to_be16((__u16) max_sdu_size),
+ (__be16 *)(frame+4));
+ } else {
+ /* Insert plain TTP header */
+ frame = skb_push(tx_skb, TTP_HEADER);
+
+ /* Insert initial credit in frame */
+ frame[0] = n & 0x7f;
+ }
+
+ /* Connect with IrLMP. No QoS parameters for now */
+ return irlmp_connect_request(self->lsap, dtsap_sel, saddr, daddr, qos,
+ tx_skb);
+}
+EXPORT_SYMBOL(irttp_connect_request);
+
+/*
+ * Function irttp_connect_confirm (handle, qos, skb)
+ *
+ * Service user confirms TSAP connection with peer.
+ *
+ */
+static void irttp_connect_confirm(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_seg_size,
+ __u8 max_header_size, struct sk_buff *skb)
+{
+ struct tsap_cb *self;
+ int parameters;
+ int ret;
+ __u8 plen;
+ __u8 n;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ self->max_seg_size = max_seg_size - TTP_HEADER;
+ self->max_header_size = max_header_size + TTP_HEADER;
+
+ /*
+ * Check if we have got some QoS parameters back! This should be the
+ * negotiated QoS for the link.
+ */
+ if (qos) {
+ pr_debug("IrTTP, Negotiated BAUD_RATE: %02x\n",
+ qos->baud_rate.bits);
+ pr_debug("IrTTP, Negotiated BAUD_RATE: %d bps.\n",
+ qos->baud_rate.value);
+ }
+
+ n = skb->data[0] & 0x7f;
+
+ pr_debug("%s(), Initial send_credit=%d\n", __func__, n);
+
+ self->send_credit = n;
+ self->tx_max_sdu_size = 0;
+ self->connected = TRUE;
+
+ parameters = skb->data[0] & 0x80;
+
+ IRDA_ASSERT(skb->len >= TTP_HEADER, return;);
+ skb_pull(skb, TTP_HEADER);
+
+ if (parameters) {
+ plen = skb->data[0];
+
+ ret = irda_param_extract_all(self, skb->data+1,
+ IRDA_MIN(skb->len-1, plen),
+ &param_info);
+
+ /* Any errors in the parameter list? */
+ if (ret < 0) {
+ net_warn_ratelimited("%s: error extracting parameters\n",
+ __func__);
+ dev_kfree_skb(skb);
+
+ /* Do not accept this connection attempt */
+ return;
+ }
+ /* Remove parameters */
+ skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+ }
+
+ pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__,
+ self->send_credit, self->avail_credit, self->remote_credit);
+
+ pr_debug("%s(), MaxSduSize=%d\n", __func__,
+ self->tx_max_sdu_size);
+
+ if (self->notify.connect_confirm) {
+ self->notify.connect_confirm(self->notify.instance, self, qos,
+ self->tx_max_sdu_size,
+ self->max_header_size, skb);
+ } else
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_connect_indication (handle, skb)
+ *
+ * Some other device is connecting to this TSAP
+ *
+ */
+static void irttp_connect_indication(void *instance, void *sap,
+ struct qos_info *qos, __u32 max_seg_size, __u8 max_header_size,
+ struct sk_buff *skb)
+{
+ struct tsap_cb *self;
+ struct lsap_cb *lsap;
+ int parameters;
+ int ret;
+ __u8 plen;
+ __u8 n;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+ IRDA_ASSERT(skb != NULL, return;);
+
+ lsap = sap;
+
+ self->max_seg_size = max_seg_size - TTP_HEADER;
+ self->max_header_size = max_header_size+TTP_HEADER;
+
+ pr_debug("%s(), TSAP sel=%02x\n", __func__, self->stsap_sel);
+
+ /* Need to update dtsap_sel if its equal to LSAP_ANY */
+ self->dtsap_sel = lsap->dlsap_sel;
+
+ n = skb->data[0] & 0x7f;
+
+ self->send_credit = n;
+ self->tx_max_sdu_size = 0;
+
+ parameters = skb->data[0] & 0x80;
+
+ IRDA_ASSERT(skb->len >= TTP_HEADER, return;);
+ skb_pull(skb, TTP_HEADER);
+
+ if (parameters) {
+ plen = skb->data[0];
+
+ ret = irda_param_extract_all(self, skb->data+1,
+ IRDA_MIN(skb->len-1, plen),
+ &param_info);
+
+ /* Any errors in the parameter list? */
+ if (ret < 0) {
+ net_warn_ratelimited("%s: error extracting parameters\n",
+ __func__);
+ dev_kfree_skb(skb);
+
+ /* Do not accept this connection attempt */
+ return;
+ }
+
+ /* Remove parameters */
+ skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+ }
+
+ if (self->notify.connect_indication) {
+ self->notify.connect_indication(self->notify.instance, self,
+ qos, self->tx_max_sdu_size,
+ self->max_header_size, skb);
+ } else
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_connect_response (handle, userdata)
+ *
+ * Service user is accepting the connection, just pass it down to
+ * IrLMP!
+ *
+ */
+int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size,
+ struct sk_buff *userdata)
+{
+ struct sk_buff *tx_skb;
+ __u8 *frame;
+ int ret;
+ __u8 n;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+ pr_debug("%s(), Source TSAP selector=%02x\n", __func__,
+ self->stsap_sel);
+
+ /* Any userdata supplied? */
+ if (userdata == NULL) {
+ tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER,
+ GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /* Reserve space for MUX_CONTROL and LAP header */
+ skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER);
+ } else {
+ tx_skb = userdata;
+ /*
+ * Check that the client has reserved enough space for
+ * headers
+ */
+ IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER,
+ { dev_kfree_skb(userdata); return -1; });
+ }
+
+ self->avail_credit = 0;
+ self->remote_credit = 0;
+ self->rx_max_sdu_size = max_sdu_size;
+ self->rx_sdu_size = 0;
+ self->rx_sdu_busy = FALSE;
+
+ n = self->initial_credit;
+
+ /* Frame has only space for max 127 credits (7 bits) */
+ if (n > 127) {
+ self->avail_credit = n - 127;
+ n = 127;
+ }
+
+ self->remote_credit = n;
+ self->connected = TRUE;
+
+ /* SAR enabled? */
+ if (max_sdu_size > 0) {
+ IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER),
+ { dev_kfree_skb(tx_skb); return -1; });
+
+ /* Insert TTP header with SAR parameters */
+ frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER);
+
+ frame[0] = TTP_PARAMETERS | n;
+ frame[1] = 0x04; /* Length */
+
+ /* irda_param_insert(self, IRTTP_MAX_SDU_SIZE, frame+1, */
+/* TTP_SAR_HEADER, &param_info) */
+
+ frame[2] = 0x01; /* MaxSduSize */
+ frame[3] = 0x02; /* Value length */
+
+ put_unaligned(cpu_to_be16((__u16) max_sdu_size),
+ (__be16 *)(frame+4));
+ } else {
+ /* Insert TTP header */
+ frame = skb_push(tx_skb, TTP_HEADER);
+
+ frame[0] = n & 0x7f;
+ }
+
+ ret = irlmp_connect_response(self->lsap, tx_skb);
+
+ return ret;
+}
+EXPORT_SYMBOL(irttp_connect_response);
+
+/*
+ * Function irttp_dup (self, instance)
+ *
+ * Duplicate TSAP, can be used by servers to confirm a connection on a
+ * new TSAP so it can keep listening on the old one.
+ */
+struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance)
+{
+ struct tsap_cb *new;
+ unsigned long flags;
+
+ /* Protect our access to the old tsap instance */
+ spin_lock_irqsave(&irttp->tsaps->hb_spinlock, flags);
+
+ /* Find the old instance */
+ if (!hashbin_find(irttp->tsaps, (long) orig, NULL)) {
+ pr_debug("%s(), unable to find TSAP\n", __func__);
+ spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+ return NULL;
+ }
+
+ /* Allocate a new instance */
+ new = kmemdup(orig, sizeof(struct tsap_cb), GFP_ATOMIC);
+ if (!new) {
+ pr_debug("%s(), unable to kmalloc\n", __func__);
+ spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+ return NULL;
+ }
+ spin_lock_init(&new->lock);
+
+ /* We don't need the old instance any more */
+ spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+
+ /* Try to dup the LSAP (may fail if we were too slow) */
+ new->lsap = irlmp_dup(orig->lsap, new);
+ if (!new->lsap) {
+ pr_debug("%s(), dup failed!\n", __func__);
+ kfree(new);
+ return NULL;
+ }
+
+ /* Not everything should be copied */
+ new->notify.instance = instance;
+
+ /* Initialize internal objects */
+ irttp_init_tsap(new);
+
+ /* This is locked */
+ hashbin_insert(irttp->tsaps, (irda_queue_t *) new, (long) new, NULL);
+
+ return new;
+}
+EXPORT_SYMBOL(irttp_dup);
+
+/*
+ * Function irttp_disconnect_request (self)
+ *
+ * Close this connection please! If priority is high, the queued data
+ * segments, if any, will be deallocated first
+ *
+ */
+int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *userdata,
+ int priority)
+{
+ int ret;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+ /* Already disconnected? */
+ if (!self->connected) {
+ pr_debug("%s(), already disconnected!\n", __func__);
+ if (userdata)
+ dev_kfree_skb(userdata);
+ return -1;
+ }
+
+ /* Disconnect already pending ?
+ * We need to use an atomic operation to prevent reentry. This
+ * function may be called from various context, like user, timer
+ * for following a disconnect_indication() (i.e. net_bh).
+ * Jean II */
+ if (test_and_set_bit(0, &self->disconnect_pend)) {
+ pr_debug("%s(), disconnect already pending\n",
+ __func__);
+ if (userdata)
+ dev_kfree_skb(userdata);
+
+ /* Try to make some progress */
+ irttp_run_tx_queue(self);
+ return -1;
+ }
+
+ /*
+ * Check if there is still data segments in the transmit queue
+ */
+ if (!skb_queue_empty(&self->tx_queue)) {
+ if (priority == P_HIGH) {
+ /*
+ * No need to send the queued data, if we are
+ * disconnecting right now since the data will
+ * not have any usable connection to be sent on
+ */
+ pr_debug("%s(): High priority!!()\n", __func__);
+ irttp_flush_queues(self);
+ } else if (priority == P_NORMAL) {
+ /*
+ * Must delay disconnect until after all data segments
+ * have been sent and the tx_queue is empty
+ */
+ /* We'll reuse this one later for the disconnect */
+ self->disconnect_skb = userdata; /* May be NULL */
+
+ irttp_run_tx_queue(self);
+
+ irttp_start_todo_timer(self, HZ/10);
+ return -1;
+ }
+ }
+ /* Note : we don't need to check if self->rx_queue is full and the
+ * state of self->rx_sdu_busy because the disconnect response will
+ * be sent at the LMP level (so even if the peer has its Tx queue
+ * full of data). - Jean II */
+
+ pr_debug("%s(), Disconnecting ...\n", __func__);
+ self->connected = FALSE;
+
+ if (!userdata) {
+ struct sk_buff *tx_skb;
+ tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC);
+ if (!tx_skb)
+ return -ENOMEM;
+
+ /*
+ * Reserve space for MUX and LAP header
+ */
+ skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+ userdata = tx_skb;
+ }
+ ret = irlmp_disconnect_request(self->lsap, userdata);
+
+ /* The disconnect is no longer pending */
+ clear_bit(0, &self->disconnect_pend); /* FALSE */
+
+ return ret;
+}
+EXPORT_SYMBOL(irttp_disconnect_request);
+
+/*
+ * Function irttp_disconnect_indication (self, reason)
+ *
+ * Disconnect indication, TSAP disconnected by peer?
+ *
+ */
+static void irttp_disconnect_indication(void *instance, void *sap,
+ LM_REASON reason, struct sk_buff *skb)
+{
+ struct tsap_cb *self;
+
+ self = instance;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+ /* Prevent higher layer to send more data */
+ self->connected = FALSE;
+
+ /* Check if client has already tried to close the TSAP */
+ if (self->close_pend) {
+ /* In this case, the higher layer is probably gone. Don't
+ * bother it and clean up the remains - Jean II */
+ if (skb)
+ dev_kfree_skb(skb);
+ irttp_close_tsap(self);
+ return;
+ }
+
+ /* If we are here, we assume that is the higher layer is still
+ * waiting for the disconnect notification and able to process it,
+ * even if he tried to disconnect. Otherwise, it would have already
+ * attempted to close the tsap and self->close_pend would be TRUE.
+ * Jean II */
+
+ /* No need to notify the client if has already tried to disconnect */
+ if (self->notify.disconnect_indication)
+ self->notify.disconnect_indication(self->notify.instance, self,
+ reason, skb);
+ else
+ if (skb)
+ dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_do_data_indication (self, skb)
+ *
+ * Try to deliver reassembled skb to layer above, and requeue it if that
+ * for some reason should fail. We mark rx sdu as busy to apply back
+ * pressure is necessary.
+ */
+static void irttp_do_data_indication(struct tsap_cb *self, struct sk_buff *skb)
+{
+ int err;
+
+ /* Check if client has already closed the TSAP and gone away */
+ if (self->close_pend) {
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ err = self->notify.data_indication(self->notify.instance, self, skb);
+
+ /* Usually the layer above will notify that it's input queue is
+ * starting to get filled by using the flow request, but this may
+ * be difficult, so it can instead just refuse to eat it and just
+ * give an error back
+ */
+ if (err) {
+ pr_debug("%s() requeueing skb!\n", __func__);
+
+ /* Make sure we take a break */
+ self->rx_sdu_busy = TRUE;
+
+ /* Need to push the header in again */
+ skb_push(skb, TTP_HEADER);
+ skb->data[0] = 0x00; /* Make sure MORE bit is cleared */
+
+ /* Put skb back on queue */
+ skb_queue_head(&self->rx_queue, skb);
+ }
+}
+
+/*
+ * Function irttp_run_rx_queue (self)
+ *
+ * Check if we have any frames to be transmitted, or if we have any
+ * available credit to give away.
+ */
+static void irttp_run_rx_queue(struct tsap_cb *self)
+{
+ struct sk_buff *skb;
+ int more = 0;
+
+ pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__,
+ self->send_credit, self->avail_credit, self->remote_credit);
+
+ /* Get exclusive access to the rx queue, otherwise don't touch it */
+ if (irda_lock(&self->rx_queue_lock) == FALSE)
+ return;
+
+ /*
+ * Reassemble all frames in receive queue and deliver them
+ */
+ while (!self->rx_sdu_busy && (skb = skb_dequeue(&self->rx_queue))) {
+ /* This bit will tell us if it's the last fragment or not */
+ more = skb->data[0] & 0x80;
+
+ /* Remove TTP header */
+ skb_pull(skb, TTP_HEADER);
+
+ /* Add the length of the remaining data */
+ self->rx_sdu_size += skb->len;
+
+ /*
+ * If SAR is disabled, or user has requested no reassembly
+ * of received fragments then we just deliver them
+ * immediately. This can be requested by clients that
+ * implements byte streams without any message boundaries
+ */
+ if (self->rx_max_sdu_size == TTP_SAR_DISABLE) {
+ irttp_do_data_indication(self, skb);
+ self->rx_sdu_size = 0;
+
+ continue;
+ }
+
+ /* Check if this is a fragment, and not the last fragment */
+ if (more) {
+ /*
+ * Queue the fragment if we still are within the
+ * limits of the maximum size of the rx_sdu
+ */
+ if (self->rx_sdu_size <= self->rx_max_sdu_size) {
+ pr_debug("%s(), queueing frag\n",
+ __func__);
+ skb_queue_tail(&self->rx_fragments, skb);
+ } else {
+ /* Free the part of the SDU that is too big */
+ dev_kfree_skb(skb);
+ }
+ continue;
+ }
+ /*
+ * This is the last fragment, so time to reassemble!
+ */
+ if ((self->rx_sdu_size <= self->rx_max_sdu_size) ||
+ (self->rx_max_sdu_size == TTP_SAR_UNBOUND)) {
+ /*
+ * A little optimizing. Only queue the fragment if
+ * there are other fragments. Since if this is the
+ * last and only fragment, there is no need to
+ * reassemble :-)
+ */
+ if (!skb_queue_empty(&self->rx_fragments)) {
+ skb_queue_tail(&self->rx_fragments,
+ skb);
+
+ skb = irttp_reassemble_skb(self);
+ }
+
+ /* Now we can deliver the reassembled skb */
+ irttp_do_data_indication(self, skb);
+ } else {
+ pr_debug("%s(), Truncated frame\n", __func__);
+
+ /* Free the part of the SDU that is too big */
+ dev_kfree_skb(skb);
+
+ /* Deliver only the valid but truncated part of SDU */
+ skb = irttp_reassemble_skb(self);
+
+ irttp_do_data_indication(self, skb);
+ }
+ self->rx_sdu_size = 0;
+ }
+
+ /*
+ * It's not trivial to keep track of how many credits are available
+ * by incrementing at each packet, because delivery may fail
+ * (irttp_do_data_indication() may requeue the frame) and because
+ * we need to take care of fragmentation.
+ * We want the other side to send up to initial_credit packets.
+ * We have some frames in our queues, and we have already allowed it
+ * to send remote_credit.
+ * No need to spinlock, write is atomic and self correcting...
+ * Jean II
+ */
+ self->avail_credit = (self->initial_credit -
+ (self->remote_credit +
+ skb_queue_len(&self->rx_queue) +
+ skb_queue_len(&self->rx_fragments)));
+
+ /* Do we have too much credits to send to peer ? */
+ if ((self->remote_credit <= TTP_RX_MIN_CREDIT) &&
+ (self->avail_credit > 0)) {
+ /* Send explicit credit frame */
+ irttp_give_credit(self);
+ /* Note : do *NOT* check if tx_queue is non-empty, that
+ * will produce deadlocks. I repeat : send a credit frame
+ * even if we have something to send in our Tx queue.
+ * If we have credits, it means that our Tx queue is blocked.
+ *
+ * Let's suppose the peer can't keep up with our Tx. He will
+ * flow control us by not sending us any credits, and we
+ * will stop Tx and start accumulating credits here.
+ * Up to the point where the peer will stop its Tx queue,
+ * for lack of credits.
+ * Let's assume the peer application is single threaded.
+ * It will block on Tx and never consume any Rx buffer.
+ * Deadlock. Guaranteed. - Jean II
+ */
+ }
+
+ /* Reset lock */
+ self->rx_queue_lock = 0;
+}
+
+#ifdef CONFIG_PROC_FS
+struct irttp_iter_state {
+ int id;
+};
+
+static void *irttp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ struct irttp_iter_state *iter = seq->private;
+ struct tsap_cb *self;
+
+ /* Protect our access to the tsap list */
+ spin_lock_irq(&irttp->tsaps->hb_spinlock);
+ iter->id = 0;
+
+ for (self = (struct tsap_cb *) hashbin_get_first(irttp->tsaps);
+ self != NULL;
+ self = (struct tsap_cb *) hashbin_get_next(irttp->tsaps)) {
+ if (iter->id == *pos)
+ break;
+ ++iter->id;
+ }
+
+ return self;
+}
+
+static void *irttp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct irttp_iter_state *iter = seq->private;
+
+ ++*pos;
+ ++iter->id;
+ return (void *) hashbin_get_next(irttp->tsaps);
+}
+
+static void irttp_seq_stop(struct seq_file *seq, void *v)
+{
+ spin_unlock_irq(&irttp->tsaps->hb_spinlock);
+}
+
+static int irttp_seq_show(struct seq_file *seq, void *v)
+{
+ const struct irttp_iter_state *iter = seq->private;
+ const struct tsap_cb *self = v;
+
+ seq_printf(seq, "TSAP %d, ", iter->id);
+ seq_printf(seq, "stsap_sel: %02x, ",
+ self->stsap_sel);
+ seq_printf(seq, "dtsap_sel: %02x\n",
+ self->dtsap_sel);
+ seq_printf(seq, " connected: %s, ",
+ self->connected ? "TRUE" : "FALSE");
+ seq_printf(seq, "avail credit: %d, ",
+ self->avail_credit);
+ seq_printf(seq, "remote credit: %d, ",
+ self->remote_credit);
+ seq_printf(seq, "send credit: %d\n",
+ self->send_credit);
+ seq_printf(seq, " tx packets: %lu, ",
+ self->stats.tx_packets);
+ seq_printf(seq, "rx packets: %lu, ",
+ self->stats.rx_packets);
+ seq_printf(seq, "tx_queue len: %u ",
+ skb_queue_len(&self->tx_queue));
+ seq_printf(seq, "rx_queue len: %u\n",
+ skb_queue_len(&self->rx_queue));
+ seq_printf(seq, " tx_sdu_busy: %s, ",
+ self->tx_sdu_busy ? "TRUE" : "FALSE");
+ seq_printf(seq, "rx_sdu_busy: %s\n",
+ self->rx_sdu_busy ? "TRUE" : "FALSE");
+ seq_printf(seq, " max_seg_size: %u, ",
+ self->max_seg_size);
+ seq_printf(seq, "tx_max_sdu_size: %u, ",
+ self->tx_max_sdu_size);
+ seq_printf(seq, "rx_max_sdu_size: %u\n",
+ self->rx_max_sdu_size);
+
+ seq_printf(seq, " Used by (%s)\n\n",
+ self->notify.name);
+ return 0;
+}
+
+static const struct seq_operations irttp_seq_ops = {
+ .start = irttp_seq_start,
+ .next = irttp_seq_next,
+ .stop = irttp_seq_stop,
+ .show = irttp_seq_show,
+};
+
+static int irttp_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open_private(file, &irttp_seq_ops,
+ sizeof(struct irttp_iter_state));
+}
+
+const struct file_operations irttp_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = irttp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_private,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/parameters.c b/net/irda/parameters.c
new file mode 100644
index 000000000..16ce32ffe
--- /dev/null
+++ b/net/irda/parameters.c
@@ -0,0 +1,584 @@
+/*********************************************************************
+ *
+ * Filename: parameters.c
+ * Version: 1.0
+ * Description: A more general way to handle (pi,pl,pv) parameters
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Jun 7 10:25:11 1999
+ * Modified at: Sun Jan 30 14:08:39 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+
+static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+
+static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func);
+
+static int irda_param_unpack(__u8 *buf, char *fmt, ...);
+
+/* Parameter value call table. Must match PV_TYPE */
+static const PV_HANDLER pv_extract_table[] = {
+ irda_extract_integer, /* Handler for any length integers */
+ irda_extract_integer, /* Handler for 8 bits integers */
+ irda_extract_integer, /* Handler for 16 bits integers */
+ irda_extract_string, /* Handler for strings */
+ irda_extract_integer, /* Handler for 32 bits integers */
+ irda_extract_octseq, /* Handler for octet sequences */
+ irda_extract_no_value /* Handler for no value parameters */
+};
+
+static const PV_HANDLER pv_insert_table[] = {
+ irda_insert_integer, /* Handler for any length integers */
+ irda_insert_integer, /* Handler for 8 bits integers */
+ irda_insert_integer, /* Handler for 16 bits integers */
+ NULL, /* Handler for strings */
+ irda_insert_integer, /* Handler for 32 bits integers */
+ NULL, /* Handler for octet sequences */
+ irda_insert_no_value /* Handler for no value parameters */
+};
+
+/*
+ * Function irda_insert_no_value (self, buf, len, pi, type, func)
+ */
+static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ irda_param_t p;
+ int ret;
+
+ p.pi = pi;
+ p.pl = 0;
+
+ /* Call handler for this parameter */
+ ret = (*func)(self, &p, PV_GET);
+
+ /* Extract values anyway, since handler may need them */
+ irda_param_pack(buf, "bb", p.pi, p.pl);
+
+ if (ret < 0)
+ return ret;
+
+ return 2; /* Inserted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_no_value (self, buf, len, type, func)
+ *
+ * Extracts a parameter without a pv field (pl=0)
+ *
+ */
+static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ irda_param_t p;
+ int ret;
+
+ /* Extract values anyway, since handler may need them */
+ irda_param_unpack(buf, "bb", &p.pi, &p.pl);
+
+ /* Call handler for this parameter */
+ ret = (*func)(self, &p, PV_PUT);
+
+ if (ret < 0)
+ return ret;
+
+ return 2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_insert_integer (self, buf, len, pi, type, func)
+ */
+static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ irda_param_t p;
+ int n = 0;
+ int err;
+
+ p.pi = pi; /* In case handler needs to know */
+ p.pl = type & PV_MASK; /* The integer type codes the length as well */
+ p.pv.i = 0; /* Clear value */
+
+ /* Call handler for this parameter */
+ err = (*func)(self, &p, PV_GET);
+ if (err < 0)
+ return err;
+
+ /*
+ * If parameter length is still 0, then (1) this is an any length
+ * integer, and (2) the handler function does not care which length
+ * we choose to use, so we pick the one the gives the fewest bytes.
+ */
+ if (p.pl == 0) {
+ if (p.pv.i < 0xff) {
+ pr_debug("%s(), using 1 byte\n", __func__);
+ p.pl = 1;
+ } else if (p.pv.i < 0xffff) {
+ pr_debug("%s(), using 2 bytes\n", __func__);
+ p.pl = 2;
+ } else {
+ pr_debug("%s(), using 4 bytes\n", __func__);
+ p.pl = 4; /* Default length */
+ }
+ }
+ /* Check if buffer is long enough for insertion */
+ if (len < (2+p.pl)) {
+ net_warn_ratelimited("%s: buffer too short for insertion!\n",
+ __func__);
+ return -1;
+ }
+ pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__,
+ p.pi, p.pl, p.pv.i);
+ switch (p.pl) {
+ case 1:
+ n += irda_param_pack(buf, "bbb", p.pi, p.pl, (__u8) p.pv.i);
+ break;
+ case 2:
+ if (type & PV_BIG_ENDIAN)
+ p.pv.i = cpu_to_be16((__u16) p.pv.i);
+ else
+ p.pv.i = cpu_to_le16((__u16) p.pv.i);
+ n += irda_param_pack(buf, "bbs", p.pi, p.pl, (__u16) p.pv.i);
+ break;
+ case 4:
+ if (type & PV_BIG_ENDIAN)
+ cpu_to_be32s(&p.pv.i);
+ else
+ cpu_to_le32s(&p.pv.i);
+ n += irda_param_pack(buf, "bbi", p.pi, p.pl, p.pv.i);
+
+ break;
+ default:
+ net_warn_ratelimited("%s: length %d not supported\n",
+ __func__, p.pl);
+ /* Skip parameter */
+ return -1;
+ }
+
+ return p.pl+2; /* Inserted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract integer (self, buf, len, pi, type, func)
+ *
+ * Extract a possibly variable length integer from buffer, and call
+ * handler for processing of the parameter
+ */
+static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ irda_param_t p;
+ int n = 0;
+ int extract_len; /* Real length we extract */
+ int err;
+
+ p.pi = pi; /* In case handler needs to know */
+ p.pl = buf[1]; /* Extract length of value */
+ p.pv.i = 0; /* Clear value */
+ extract_len = p.pl; /* Default : extract all */
+
+ /* Check if buffer is long enough for parsing */
+ if (len < (2+p.pl)) {
+ net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n",
+ __func__, p.pl, len);
+ return -1;
+ }
+
+ /*
+ * Check that the integer length is what we expect it to be. If the
+ * handler want a 16 bits integer then a 32 bits is not good enough
+ * PV_INTEGER means that the handler is flexible.
+ */
+ if (((type & PV_MASK) != PV_INTEGER) && ((type & PV_MASK) != p.pl)) {
+ net_err_ratelimited("%s: invalid parameter length! Expected %d bytes, but value had %d bytes!\n",
+ __func__, type & PV_MASK, p.pl);
+
+ /* Most parameters are bit/byte fields or little endian,
+ * so it's ok to only extract a subset of it (the subset
+ * that the handler expect). This is necessary, as some
+ * broken implementations seems to add extra undefined bits.
+ * If the parameter is shorter than we expect or is big
+ * endian, we can't play those tricks. Jean II */
+ if((p.pl < (type & PV_MASK)) || (type & PV_BIG_ENDIAN)) {
+ /* Skip parameter */
+ return p.pl+2;
+ } else {
+ /* Extract subset of it, fallthrough */
+ extract_len = type & PV_MASK;
+ }
+ }
+
+
+ switch (extract_len) {
+ case 1:
+ n += irda_param_unpack(buf+2, "b", &p.pv.i);
+ break;
+ case 2:
+ n += irda_param_unpack(buf+2, "s", &p.pv.i);
+ if (type & PV_BIG_ENDIAN)
+ p.pv.i = be16_to_cpu((__u16) p.pv.i);
+ else
+ p.pv.i = le16_to_cpu((__u16) p.pv.i);
+ break;
+ case 4:
+ n += irda_param_unpack(buf+2, "i", &p.pv.i);
+ if (type & PV_BIG_ENDIAN)
+ be32_to_cpus(&p.pv.i);
+ else
+ le32_to_cpus(&p.pv.i);
+ break;
+ default:
+ net_warn_ratelimited("%s: length %d not supported\n",
+ __func__, p.pl);
+
+ /* Skip parameter */
+ return p.pl+2;
+ }
+
+ pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__,
+ p.pi, p.pl, p.pv.i);
+ /* Call handler for this parameter */
+ err = (*func)(self, &p, PV_PUT);
+ if (err < 0)
+ return err;
+
+ return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_string (self, buf, len, type, func)
+ */
+static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ char str[33];
+ irda_param_t p;
+ int err;
+
+ p.pi = pi; /* In case handler needs to know */
+ p.pl = buf[1]; /* Extract length of value */
+ if (p.pl > 32)
+ p.pl = 32;
+
+ pr_debug("%s(), pi=%#x, pl=%d\n", __func__,
+ p.pi, p.pl);
+
+ /* Check if buffer is long enough for parsing */
+ if (len < (2+p.pl)) {
+ net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n",
+ __func__, p.pl, len);
+ return -1;
+ }
+
+ /* Should be safe to copy string like this since we have already
+ * checked that the buffer is long enough */
+ strncpy(str, buf+2, p.pl);
+
+ pr_debug("%s(), str=0x%02x 0x%02x\n",
+ __func__, (__u8)str[0], (__u8)str[1]);
+
+ /* Null terminate string */
+ str[p.pl] = '\0';
+
+ p.pv.c = str; /* Handler will need to take a copy */
+
+ /* Call handler for this parameter */
+ err = (*func)(self, &p, PV_PUT);
+ if (err < 0)
+ return err;
+
+ return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_octseq (self, buf, len, type, func)
+ */
+static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi,
+ PV_TYPE type, PI_HANDLER func)
+{
+ irda_param_t p;
+
+ p.pi = pi; /* In case handler needs to know */
+ p.pl = buf[1]; /* Extract length of value */
+
+ /* Check if buffer is long enough for parsing */
+ if (len < (2+p.pl)) {
+ net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n",
+ __func__, p.pl, len);
+ return -1;
+ }
+
+ pr_debug("%s(), not impl\n", __func__);
+
+ return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_param_pack (skb, fmt, ...)
+ *
+ * Format:
+ * 'i' = 32 bits integer
+ * 's' = string
+ *
+ */
+int irda_param_pack(__u8 *buf, char *fmt, ...)
+{
+ irda_pv_t arg;
+ va_list args;
+ char *p;
+ int n = 0;
+
+ va_start(args, fmt);
+
+ for (p = fmt; *p != '\0'; p++) {
+ switch (*p) {
+ case 'b': /* 8 bits unsigned byte */
+ buf[n++] = (__u8)va_arg(args, int);
+ break;
+ case 's': /* 16 bits unsigned short */
+ arg.i = (__u16)va_arg(args, int);
+ put_unaligned((__u16)arg.i, (__u16 *)(buf+n)); n+=2;
+ break;
+ case 'i': /* 32 bits unsigned integer */
+ arg.i = va_arg(args, __u32);
+ put_unaligned(arg.i, (__u32 *)(buf+n)); n+=4;
+ break;
+#if 0
+ case 'c': /* \0 terminated string */
+ arg.c = va_arg(args, char *);
+ strcpy(buf+n, arg.c);
+ n += strlen(arg.c) + 1;
+ break;
+#endif
+ default:
+ va_end(args);
+ return -1;
+ }
+ }
+ va_end(args);
+
+ return 0;
+}
+EXPORT_SYMBOL(irda_param_pack);
+
+/*
+ * Function irda_param_unpack (skb, fmt, ...)
+ */
+static int irda_param_unpack(__u8 *buf, char *fmt, ...)
+{
+ irda_pv_t arg;
+ va_list args;
+ char *p;
+ int n = 0;
+
+ va_start(args, fmt);
+
+ for (p = fmt; *p != '\0'; p++) {
+ switch (*p) {
+ case 'b': /* 8 bits byte */
+ arg.ip = va_arg(args, __u32 *);
+ *arg.ip = buf[n++];
+ break;
+ case 's': /* 16 bits short */
+ arg.ip = va_arg(args, __u32 *);
+ *arg.ip = get_unaligned((__u16 *)(buf+n)); n+=2;
+ break;
+ case 'i': /* 32 bits unsigned integer */
+ arg.ip = va_arg(args, __u32 *);
+ *arg.ip = get_unaligned((__u32 *)(buf+n)); n+=4;
+ break;
+#if 0
+ case 'c': /* \0 terminated string */
+ arg.c = va_arg(args, char *);
+ strcpy(arg.c, buf+n);
+ n += strlen(arg.c) + 1;
+ break;
+#endif
+ default:
+ va_end(args);
+ return -1;
+ }
+
+ }
+ va_end(args);
+
+ return 0;
+}
+
+/*
+ * Function irda_param_insert (self, pi, buf, len, info)
+ *
+ * Insert the specified parameter (pi) into buffer. Returns number of
+ * bytes inserted
+ */
+int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len,
+ pi_param_info_t *info)
+{
+ const pi_minor_info_t *pi_minor_info;
+ __u8 pi_minor;
+ __u8 pi_major;
+ int type;
+ int ret = -1;
+ int n = 0;
+
+ IRDA_ASSERT(buf != NULL, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
+
+ pi_minor = pi & info->pi_mask;
+ pi_major = pi >> info->pi_major_offset;
+
+ /* Check if the identifier value (pi) is valid */
+ if ((pi_major > info->len-1) ||
+ (pi_minor > info->tables[pi_major].len-1))
+ {
+ pr_debug("%s(), no handler for parameter=0x%02x\n",
+ __func__, pi);
+
+ /* Skip this parameter */
+ return -1;
+ }
+
+ /* Lookup the info on how to parse this parameter */
+ pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor];
+
+ /* Find expected data type for this parameter identifier (pi)*/
+ type = pi_minor_info->type;
+
+ /* Check if handler has been implemented */
+ if (!pi_minor_info->func) {
+ net_info_ratelimited("%s: no handler for pi=%#x\n",
+ __func__, pi);
+ /* Skip this parameter */
+ return -1;
+ }
+
+ /* Insert parameter value */
+ ret = (*pv_insert_table[type & PV_MASK])(self, buf+n, len, pi, type,
+ pi_minor_info->func);
+ return ret;
+}
+EXPORT_SYMBOL(irda_param_insert);
+
+/*
+ * Function irda_param_extract (self, buf, len, info)
+ *
+ * Parse all parameters. If len is correct, then everything should be
+ * safe. Returns the number of bytes that was parsed
+ *
+ */
+static int irda_param_extract(void *self, __u8 *buf, int len,
+ pi_param_info_t *info)
+{
+ const pi_minor_info_t *pi_minor_info;
+ __u8 pi_minor;
+ __u8 pi_major;
+ int type;
+ int ret = -1;
+ int n = 0;
+
+ IRDA_ASSERT(buf != NULL, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
+
+ pi_minor = buf[n] & info->pi_mask;
+ pi_major = buf[n] >> info->pi_major_offset;
+
+ /* Check if the identifier value (pi) is valid */
+ if ((pi_major > info->len-1) ||
+ (pi_minor > info->tables[pi_major].len-1))
+ {
+ pr_debug("%s(), no handler for parameter=0x%02x\n",
+ __func__, buf[0]);
+
+ /* Skip this parameter */
+ return 2 + buf[n + 1]; /* Continue */
+ }
+
+ /* Lookup the info on how to parse this parameter */
+ pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor];
+
+ /* Find expected data type for this parameter identifier (pi)*/
+ type = pi_minor_info->type;
+
+ pr_debug("%s(), pi=[%d,%d], type=%d\n", __func__,
+ pi_major, pi_minor, type);
+
+ /* Check if handler has been implemented */
+ if (!pi_minor_info->func) {
+ net_info_ratelimited("%s: no handler for pi=%#x\n",
+ __func__, buf[n]);
+ /* Skip this parameter */
+ return 2 + buf[n + 1]; /* Continue */
+ }
+
+ /* Parse parameter value */
+ ret = (*pv_extract_table[type & PV_MASK])(self, buf+n, len, buf[n],
+ type, pi_minor_info->func);
+ return ret;
+}
+
+/*
+ * Function irda_param_extract_all (self, buf, len, info)
+ *
+ * Parse all parameters. If len is correct, then everything should be
+ * safe. Returns the number of bytes that was parsed
+ *
+ */
+int irda_param_extract_all(void *self, __u8 *buf, int len,
+ pi_param_info_t *info)
+{
+ int ret = -1;
+ int n = 0;
+
+ IRDA_ASSERT(buf != NULL, return ret;);
+ IRDA_ASSERT(info != NULL, return ret;);
+
+ /*
+ * Parse all parameters. Each parameter must be at least two bytes
+ * long or else there is no point in trying to parse it
+ */
+ while (len > 2) {
+ ret = irda_param_extract(self, buf+n, len, info);
+ if (ret < 0)
+ return ret;
+
+ n += ret;
+ len -= ret;
+ }
+ return n;
+}
+EXPORT_SYMBOL(irda_param_extract_all);
diff --git a/net/irda/qos.c b/net/irda/qos.c
new file mode 100644
index 000000000..25ba8509a
--- /dev/null
+++ b/net/irda/qos.c
@@ -0,0 +1,771 @@
+/*********************************************************************
+ *
+ * Filename: qos.c
+ * Version: 1.0
+ * Description: IrLAP QoS parameter negotiation
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Tue Sep 9 00:00:26 1997
+ * Modified at: Sun Jan 30 14:29:16 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ ********************************************************************/
+
+#include <linux/export.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
+
+/*
+ * Maximum values of the baud rate we negotiate with the other end.
+ * Most often, you don't have to change that, because Linux-IrDA will
+ * use the maximum offered by the link layer, which usually works fine.
+ * In some very rare cases, you may want to limit it to lower speeds...
+ */
+int sysctl_max_baud_rate = 16000000;
+/*
+ * Maximum value of the lap disconnect timer we negotiate with the other end.
+ * Most often, the value below represent the best compromise, but some user
+ * may want to keep the LAP alive longer or shorter in case of link failure.
+ * Remember that the threshold time (early warning) is fixed to 3s...
+ */
+int sysctl_max_noreply_time = 12;
+/*
+ * Minimum turn time to be applied before transmitting to the peer.
+ * Nonzero values (usec) are used as lower limit to the per-connection
+ * mtt value which was announced by the other end during negotiation.
+ * Might be helpful if the peer device provides too short mtt.
+ * Default is 10us which means using the unmodified value given by the
+ * peer except if it's 0 (0 is likely a bug in the other stack).
+ */
+unsigned int sysctl_min_tx_turn_time = 10;
+/*
+ * Maximum data size to be used in transmission in payload of LAP frame.
+ * There is a bit of confusion in the IrDA spec :
+ * The LAP spec defines the payload of a LAP frame (I field) to be
+ * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
+ * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY
+ * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header
+ * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP
+ * payload), that's only 2042 bytes. Oups !
+ * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s,
+ * so adjust to 2042... I don't know if this bug applies only for 2048
+ * bytes frames or all negotiated frame sizes, but you can use the sysctl
+ * to play with this value anyway.
+ * Jean II */
+unsigned int sysctl_max_tx_data_size = 2042;
+/*
+ * Maximum transmit window, i.e. number of LAP frames between turn-around.
+ * This allow to override what the peer told us. Some peers are buggy and
+ * don't always support what they tell us.
+ * Jean II */
+unsigned int sysctl_max_tx_window = 7;
+
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
+static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
+ int get);
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param,
+ int get);
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get);
+static int irlap_param_window_size(void *instance, irda_param_t *param,
+ int get);
+static int irlap_param_additional_bofs(void *instance, irda_param_t *parm,
+ int get);
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param,
+ int get);
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos);
+#endif
+
+static __u32 min_turn_times[] = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
+static __u32 baud_rates[] = { 2400, 9600, 19200, 38400, 57600, 115200, 576000,
+ 1152000, 4000000, 16000000 }; /* bps */
+static __u32 data_sizes[] = { 64, 128, 256, 512, 1024, 2048 }; /* bytes */
+static __u32 add_bofs[] = { 48, 24, 12, 5, 3, 2, 1, 0 }; /* bytes */
+static __u32 max_turn_times[] = { 500, 250, 100, 50 }; /* ms */
+static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 }; /* secs */
+
+static __u32 max_line_capacities[10][4] = {
+ /* 500 ms 250 ms 100 ms 50 ms (max turn time) */
+ { 100, 0, 0, 0 }, /* 2400 bps */
+ { 400, 0, 0, 0 }, /* 9600 bps */
+ { 800, 0, 0, 0 }, /* 19200 bps */
+ { 1600, 0, 0, 0 }, /* 38400 bps */
+ { 2360, 0, 0, 0 }, /* 57600 bps */
+ { 4800, 2400, 960, 480 }, /* 115200 bps */
+ { 28800, 11520, 5760, 2880 }, /* 576000 bps */
+ { 57600, 28800, 11520, 5760 }, /* 1152000 bps */
+ { 200000, 100000, 40000, 20000 }, /* 4000000 bps */
+ { 800000, 400000, 160000, 80000 }, /* 16000000 bps */
+};
+
+static const pi_minor_info_t pi_minor_call_table_type_0[] = {
+ { NULL, 0 },
+/* 01 */{ irlap_param_baud_rate, PV_INTEGER | PV_LITTLE_ENDIAN },
+ { NULL, 0 },
+ { NULL, 0 },
+ { NULL, 0 },
+ { NULL, 0 },
+ { NULL, 0 },
+ { NULL, 0 },
+/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS }
+};
+
+static const pi_minor_info_t pi_minor_call_table_type_1[] = {
+ { NULL, 0 },
+ { NULL, 0 },
+/* 82 */{ irlap_param_max_turn_time, PV_INT_8_BITS },
+/* 83 */{ irlap_param_data_size, PV_INT_8_BITS },
+/* 84 */{ irlap_param_window_size, PV_INT_8_BITS },
+/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS },
+/* 86 */{ irlap_param_min_turn_time, PV_INT_8_BITS },
+};
+
+static const pi_major_info_t pi_major_call_table[] = {
+ { pi_minor_call_table_type_0, 9 },
+ { pi_minor_call_table_type_1, 7 },
+};
+
+static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 };
+
+/* ---------------------- LOCAL SUBROUTINES ---------------------- */
+/* Note : we start with a bunch of local subroutines.
+ * As the compiler is "one pass", this is the only way to get them to
+ * inline properly...
+ * Jean II
+ */
+/*
+ * Function value_index (value, array, size)
+ *
+ * Returns the index to the value in the specified array
+ */
+static inline int value_index(__u32 value, __u32 *array, int size)
+{
+ int i;
+
+ for (i=0; i < size; i++)
+ if (array[i] == value)
+ break;
+ return i;
+}
+
+/*
+ * Function index_value (index, array)
+ *
+ * Returns value to index in array, easy!
+ *
+ */
+static inline __u32 index_value(int index, __u32 *array)
+{
+ return array[index];
+}
+
+/*
+ * Function msb_index (word)
+ *
+ * Returns index to most significant bit (MSB) in word
+ *
+ */
+static int msb_index (__u16 word)
+{
+ __u16 msb = 0x8000;
+ int index = 15; /* Current MSB */
+
+ /* Check for buggy peers.
+ * Note : there is a small probability that it could be us, but I
+ * would expect driver authors to catch that pretty early and be
+ * able to check precisely what's going on. If a end user sees this,
+ * it's very likely the peer. - Jean II */
+ if (word == 0) {
+ net_warn_ratelimited("%s(), Detected buggy peer, adjust null PV to 0x1!\n",
+ __func__);
+ /* The only safe choice (we don't know the array size) */
+ word = 0x1;
+ }
+
+ while (msb) {
+ if (word & msb)
+ break; /* Found it! */
+ msb >>=1;
+ index--;
+ }
+ return index;
+}
+
+/*
+ * Function value_lower_bits (value, array)
+ *
+ * Returns a bit field marking all possibility lower than value.
+ */
+static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field)
+{
+ int i;
+ __u16 mask = 0x1;
+ __u16 result = 0x0;
+
+ for (i=0; i < size; i++) {
+ /* Add the current value to the bit field, shift mask */
+ result |= mask;
+ mask <<= 1;
+ /* Finished ? */
+ if (array[i] >= value)
+ break;
+ }
+ /* Send back a valid index */
+ if(i >= size)
+ i = size - 1; /* Last item */
+ *field = result;
+ return i;
+}
+
+/*
+ * Function value_highest_bit (value, array)
+ *
+ * Returns a bit field marking the highest possibility lower than value.
+ */
+static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field)
+{
+ int i;
+ __u16 mask = 0x1;
+ __u16 result = 0x0;
+
+ for (i=0; i < size; i++) {
+ /* Finished ? */
+ if (array[i] <= value)
+ break;
+ /* Shift mask */
+ mask <<= 1;
+ }
+ /* Set the current value to the bit field */
+ result |= mask;
+ /* Send back a valid index */
+ if(i >= size)
+ i = size - 1; /* Last item */
+ *field = result;
+ return i;
+}
+
+/* -------------------------- MAIN CALLS -------------------------- */
+
+/*
+ * Function irda_qos_compute_intersection (qos, new)
+ *
+ * Compute the intersection of the old QoS capabilities with new ones
+ *
+ */
+void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new)
+{
+ IRDA_ASSERT(qos != NULL, return;);
+ IRDA_ASSERT(new != NULL, return;);
+
+ /* Apply */
+ qos->baud_rate.bits &= new->baud_rate.bits;
+ qos->window_size.bits &= new->window_size.bits;
+ qos->min_turn_time.bits &= new->min_turn_time.bits;
+ qos->max_turn_time.bits &= new->max_turn_time.bits;
+ qos->data_size.bits &= new->data_size.bits;
+ qos->link_disc_time.bits &= new->link_disc_time.bits;
+ qos->additional_bofs.bits &= new->additional_bofs.bits;
+
+ irda_qos_bits_to_value(qos);
+}
+
+/*
+ * Function irda_init_max_qos_capabilies (qos)
+ *
+ * The purpose of this function is for layers and drivers to be able to
+ * set the maximum QoS possible and then "and in" their own limitations
+ *
+ */
+void irda_init_max_qos_capabilies(struct qos_info *qos)
+{
+ int i;
+ /*
+ * These are the maximum supported values as specified on pages
+ * 39-43 in IrLAP
+ */
+
+ /* Use sysctl to set some configurable values... */
+ /* Set configured max speed */
+ i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10,
+ &qos->baud_rate.bits);
+ sysctl_max_baud_rate = index_value(i, baud_rates);
+
+ /* Set configured max disc time */
+ i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8,
+ &qos->link_disc_time.bits);
+ sysctl_max_noreply_time = index_value(i, link_disc_times);
+
+ /* LSB is first byte, MSB is second byte */
+ qos->baud_rate.bits &= 0x03ff;
+
+ qos->window_size.bits = 0x7f;
+ qos->min_turn_time.bits = 0xff;
+ qos->max_turn_time.bits = 0x0f;
+ qos->data_size.bits = 0x3f;
+ qos->link_disc_time.bits &= 0xff;
+ qos->additional_bofs.bits = 0xff;
+}
+EXPORT_SYMBOL(irda_init_max_qos_capabilies);
+
+/*
+ * Function irlap_adjust_qos_settings (qos)
+ *
+ * Adjust QoS settings in case some values are not possible to use because
+ * of other settings
+ */
+static void irlap_adjust_qos_settings(struct qos_info *qos)
+{
+ __u32 line_capacity;
+ int index;
+
+ /*
+ * Make sure the mintt is sensible.
+ * Main culprit : Ericsson T39. - Jean II
+ */
+ if (sysctl_min_tx_turn_time > qos->min_turn_time.value) {
+ int i;
+
+ net_warn_ratelimited("%s(), Detected buggy peer, adjust mtt to %dus!\n",
+ __func__, sysctl_min_tx_turn_time);
+
+ /* We don't really need bits, but easier this way */
+ i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times,
+ 8, &qos->min_turn_time.bits);
+ sysctl_min_tx_turn_time = index_value(i, min_turn_times);
+ qos->min_turn_time.value = sysctl_min_tx_turn_time;
+ }
+
+ /*
+ * Not allowed to use a max turn time less than 500 ms if the baudrate
+ * is less than 115200
+ */
+ if ((qos->baud_rate.value < 115200) &&
+ (qos->max_turn_time.value < 500))
+ {
+ pr_debug("%s(), adjusting max turn time from %d to 500 ms\n",
+ __func__, qos->max_turn_time.value);
+ qos->max_turn_time.value = 500;
+ }
+
+ /*
+ * The data size must be adjusted according to the baud rate and max
+ * turn time
+ */
+ index = value_index(qos->data_size.value, data_sizes, 6);
+ line_capacity = irlap_max_line_capacity(qos->baud_rate.value,
+ qos->max_turn_time.value);
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+ while ((qos->data_size.value > line_capacity) && (index > 0)) {
+ qos->data_size.value = data_sizes[index--];
+ pr_debug("%s(), reducing data size to %d\n",
+ __func__, qos->data_size.value);
+ }
+#else /* Use method described in section 6.6.11 of IrLAP */
+ while (irlap_requested_line_capacity(qos) > line_capacity) {
+ IRDA_ASSERT(index != 0, return;);
+
+ /* Must be able to send at least one frame */
+ if (qos->window_size.value > 1) {
+ qos->window_size.value--;
+ pr_debug("%s(), reducing window size to %d\n",
+ __func__, qos->window_size.value);
+ } else if (index > 1) {
+ qos->data_size.value = data_sizes[index--];
+ pr_debug("%s(), reducing data size to %d\n",
+ __func__, qos->data_size.value);
+ } else {
+ net_warn_ratelimited("%s(), nothing more we can do!\n",
+ __func__);
+ }
+ }
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+ /*
+ * Fix tx data size according to user limits - Jean II
+ */
+ if (qos->data_size.value > sysctl_max_tx_data_size)
+ /* Allow non discrete adjustement to avoid losing capacity */
+ qos->data_size.value = sysctl_max_tx_data_size;
+ /*
+ * Override Tx window if user request it. - Jean II
+ */
+ if (qos->window_size.value > sysctl_max_tx_window)
+ qos->window_size.value = sysctl_max_tx_window;
+}
+
+/*
+ * Function irlap_negotiate (qos_device, qos_session, skb)
+ *
+ * Negotiate QoS values, not really that much negotiation :-)
+ * We just set the QoS capabilities for the peer station
+ *
+ */
+int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb)
+{
+ int ret;
+
+ ret = irda_param_extract_all(self, skb->data, skb->len,
+ &irlap_param_info);
+
+ /* Convert the negotiated bits to values */
+ irda_qos_bits_to_value(&self->qos_tx);
+ irda_qos_bits_to_value(&self->qos_rx);
+
+ irlap_adjust_qos_settings(&self->qos_tx);
+
+ pr_debug("Setting BAUD_RATE to %d bps.\n",
+ self->qos_tx.baud_rate.value);
+ pr_debug("Setting DATA_SIZE to %d bytes\n",
+ self->qos_tx.data_size.value);
+ pr_debug("Setting WINDOW_SIZE to %d\n",
+ self->qos_tx.window_size.value);
+ pr_debug("Setting XBOFS to %d\n",
+ self->qos_tx.additional_bofs.value);
+ pr_debug("Setting MAX_TURN_TIME to %d ms.\n",
+ self->qos_tx.max_turn_time.value);
+ pr_debug("Setting MIN_TURN_TIME to %d usecs.\n",
+ self->qos_tx.min_turn_time.value);
+ pr_debug("Setting LINK_DISC to %d secs.\n",
+ self->qos_tx.link_disc_time.value);
+ return ret;
+}
+
+/*
+ * Function irlap_insert_negotiation_params (qos, fp)
+ *
+ * Insert QoS negotiaion pararameters into frame
+ *
+ */
+int irlap_insert_qos_negotiation_params(struct irlap_cb *self,
+ struct sk_buff *skb)
+{
+ int ret;
+
+ /* Insert data rate */
+ ret = irda_param_insert(self, PI_BAUD_RATE, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert max turnaround time */
+ ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert data size */
+ ret = irda_param_insert(self, PI_DATA_SIZE, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert window size */
+ ret = irda_param_insert(self, PI_WINDOW_SIZE, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert additional BOFs */
+ ret = irda_param_insert(self, PI_ADD_BOFS, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert minimum turnaround time */
+ ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ /* Insert link disconnect/threshold time */
+ ret = irda_param_insert(self, PI_LINK_DISC, skb_tail_pointer(skb),
+ skb_tailroom(skb), &irlap_param_info);
+ if (ret < 0)
+ return ret;
+ skb_put(skb, ret);
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_baud_rate (instance, param, get)
+ *
+ * Negotiate data-rate
+ *
+ */
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get)
+{
+ __u16 final;
+
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get) {
+ param->pv.i = self->qos_rx.baud_rate.bits;
+ pr_debug("%s(), baud rate = 0x%02x\n",
+ __func__, param->pv.i);
+ } else {
+ /*
+ * Stations must agree on baud rate, so calculate
+ * intersection
+ */
+ pr_debug("Requested BAUD_RATE: 0x%04x\n", (__u16)param->pv.i);
+ final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits;
+
+ pr_debug("Final BAUD_RATE: 0x%04x\n", final);
+ self->qos_tx.baud_rate.bits = final;
+ self->qos_rx.baud_rate.bits = final;
+ }
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_link_disconnect (instance, param, get)
+ *
+ * Negotiate link disconnect/threshold time.
+ *
+ */
+static int irlap_param_link_disconnect(void *instance, irda_param_t *param,
+ int get)
+{
+ __u16 final;
+
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.link_disc_time.bits;
+ else {
+ /*
+ * Stations must agree on link disconnect/threshold
+ * time.
+ */
+ pr_debug("LINK_DISC: %02x\n", (__u8)param->pv.i);
+ final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits;
+
+ pr_debug("Final LINK_DISC: %02x\n", final);
+ self->qos_tx.link_disc_time.bits = final;
+ self->qos_rx.link_disc_time.bits = final;
+ }
+ return 0;
+}
+
+/*
+ * Function irlap_param_max_turn_time (instance, param, get)
+ *
+ * Negotiate the maximum turnaround time. This is a type 1 parameter and
+ * will be negotiated independently for each station
+ *
+ */
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param,
+ int get)
+{
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.max_turn_time.bits;
+ else
+ self->qos_tx.max_turn_time.bits = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_data_size (instance, param, get)
+ *
+ * Negotiate the data size. This is a type 1 parameter and
+ * will be negotiated independently for each station
+ *
+ */
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get)
+{
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.data_size.bits;
+ else
+ self->qos_tx.data_size.bits = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_window_size (instance, param, get)
+ *
+ * Negotiate the window size. This is a type 1 parameter and
+ * will be negotiated independently for each station
+ *
+ */
+static int irlap_param_window_size(void *instance, irda_param_t *param,
+ int get)
+{
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.window_size.bits;
+ else
+ self->qos_tx.window_size.bits = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_additional_bofs (instance, param, get)
+ *
+ * Negotiate additional BOF characters. This is a type 1 parameter and
+ * will be negotiated independently for each station.
+ */
+static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get)
+{
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.additional_bofs.bits;
+ else
+ self->qos_tx.additional_bofs.bits = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function irlap_param_min_turn_time (instance, param, get)
+ *
+ * Negotiate the minimum turn around time. This is a type 1 parameter and
+ * will be negotiated independently for each station
+ */
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param,
+ int get)
+{
+ struct irlap_cb *self = (struct irlap_cb *) instance;
+
+ IRDA_ASSERT(self != NULL, return -1;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+ if (get)
+ param->pv.i = self->qos_rx.min_turn_time.bits;
+ else
+ self->qos_tx.min_turn_time.bits = (__u8) param->pv.i;
+
+ return 0;
+}
+
+/*
+ * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time)
+ *
+ * Calculate the maximum line capacity
+ *
+ */
+__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time)
+{
+ __u32 line_capacity;
+ int i,j;
+
+ pr_debug("%s(), speed=%d, max_turn_time=%d\n",
+ __func__, speed, max_turn_time);
+
+ i = value_index(speed, baud_rates, 10);
+ j = value_index(max_turn_time, max_turn_times, 4);
+
+ IRDA_ASSERT(((i >=0) && (i <10)), return 0;);
+ IRDA_ASSERT(((j >=0) && (j <4)), return 0;);
+
+ line_capacity = max_line_capacities[i][j];
+
+ pr_debug("%s(), line capacity=%d bytes\n",
+ __func__, line_capacity);
+
+ return line_capacity;
+}
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos)
+{
+ __u32 line_capacity;
+
+ line_capacity = qos->window_size.value *
+ (qos->data_size.value + 6 + qos->additional_bofs.value) +
+ irlap_min_turn_time_in_bytes(qos->baud_rate.value,
+ qos->min_turn_time.value);
+
+ pr_debug("%s(), requested line capacity=%d\n",
+ __func__, line_capacity);
+
+ return line_capacity;
+}
+#endif
+
+void irda_qos_bits_to_value(struct qos_info *qos)
+{
+ int index;
+
+ IRDA_ASSERT(qos != NULL, return;);
+
+ index = msb_index(qos->baud_rate.bits);
+ qos->baud_rate.value = baud_rates[index];
+
+ index = msb_index(qos->data_size.bits);
+ qos->data_size.value = data_sizes[index];
+
+ index = msb_index(qos->window_size.bits);
+ qos->window_size.value = index+1;
+
+ index = msb_index(qos->min_turn_time.bits);
+ qos->min_turn_time.value = min_turn_times[index];
+
+ index = msb_index(qos->max_turn_time.bits);
+ qos->max_turn_time.value = max_turn_times[index];
+
+ index = msb_index(qos->link_disc_time.bits);
+ qos->link_disc_time.value = link_disc_times[index];
+
+ index = msb_index(qos->additional_bofs.bits);
+ qos->additional_bofs.value = add_bofs[index];
+}
+EXPORT_SYMBOL(irda_qos_bits_to_value);
diff --git a/net/irda/timer.c b/net/irda/timer.c
new file mode 100644
index 000000000..0c4c115a5
--- /dev/null
+++ b/net/irda/timer.c
@@ -0,0 +1,231 @@
+/*********************************************************************
+ *
+ * Filename: timer.c
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Sat Aug 16 00:59:29 1997
+ * Modified at: Wed Dec 8 12:50:34 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/delay.h>
+
+#include <net/irda/timer.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+
+extern int sysctl_slot_timeout;
+
+static void irlap_slot_timer_expired(void* data);
+static void irlap_query_timer_expired(void* data);
+static void irlap_final_timer_expired(void* data);
+static void irlap_wd_timer_expired(void* data);
+static void irlap_backoff_timer_expired(void* data);
+static void irlap_media_busy_expired(void* data);
+
+void irlap_start_slot_timer(struct irlap_cb *self, int timeout)
+{
+ irda_start_timer(&self->slot_timer, timeout, (void *) self,
+ irlap_slot_timer_expired);
+}
+
+void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
+{
+ int timeout;
+
+ /* Calculate when the peer discovery should end. Normally, we
+ * get the end-of-discovery frame, so this is just in case
+ * we miss it.
+ * Basically, we multiply the number of remaining slots by our
+ * slot time, plus add some extra time to properly receive the last
+ * discovery packet (which is longer due to extra discovery info),
+ * to avoid messing with for incoming connections requests and
+ * to accommodate devices that perform discovery slower than us.
+ * Jean II */
+ timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
+ + XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT);
+
+ /* Set or re-set the timer. We reset the timer for each received
+ * discovery query, which allow us to automatically adjust to
+ * the speed of the peer discovery (faster or slower). Jean II */
+ irda_start_timer( &self->query_timer, timeout, (void *) self,
+ irlap_query_timer_expired);
+}
+
+void irlap_start_final_timer(struct irlap_cb *self, int timeout)
+{
+ irda_start_timer(&self->final_timer, timeout, (void *) self,
+ irlap_final_timer_expired);
+}
+
+void irlap_start_wd_timer(struct irlap_cb *self, int timeout)
+{
+ irda_start_timer(&self->wd_timer, timeout, (void *) self,
+ irlap_wd_timer_expired);
+}
+
+void irlap_start_backoff_timer(struct irlap_cb *self, int timeout)
+{
+ irda_start_timer(&self->backoff_timer, timeout, (void *) self,
+ irlap_backoff_timer_expired);
+}
+
+void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout)
+{
+ irda_start_timer(&self->media_busy_timer, timeout,
+ (void *) self, irlap_media_busy_expired);
+}
+
+void irlap_stop_mbusy_timer(struct irlap_cb *self)
+{
+ /* If timer is activated, kill it! */
+ del_timer(&self->media_busy_timer);
+
+ /* If we are in NDM, there is a bunch of events in LAP that
+ * that be pending due to the media_busy condition, such as
+ * CONNECT_REQUEST and SEND_UI_FRAME. If we don't generate
+ * an event, they will wait forever...
+ * Jean II */
+ if (self->state == LAP_NDM)
+ irlap_do_event(self, MEDIA_BUSY_TIMER_EXPIRED, NULL, NULL);
+}
+
+void irlmp_start_watchdog_timer(struct lsap_cb *self, int timeout)
+{
+ irda_start_timer(&self->watchdog_timer, timeout, (void *) self,
+ irlmp_watchdog_timer_expired);
+}
+
+void irlmp_start_discovery_timer(struct irlmp_cb *self, int timeout)
+{
+ irda_start_timer(&self->discovery_timer, timeout, (void *) self,
+ irlmp_discovery_timer_expired);
+}
+
+void irlmp_start_idle_timer(struct lap_cb *self, int timeout)
+{
+ irda_start_timer(&self->idle_timer, timeout, (void *) self,
+ irlmp_idle_timer_expired);
+}
+
+void irlmp_stop_idle_timer(struct lap_cb *self)
+{
+ /* If timer is activated, kill it! */
+ del_timer(&self->idle_timer);
+}
+
+/*
+ * Function irlap_slot_timer_expired (data)
+ *
+ * IrLAP slot timer has expired
+ *
+ */
+static void irlap_slot_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, SLOT_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irlap_query_timer_expired (data)
+ *
+ * IrLAP query timer has expired
+ *
+ */
+static void irlap_query_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, QUERY_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irda_final_timer_expired (data)
+ *
+ *
+ *
+ */
+static void irlap_final_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, FINAL_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irda_wd_timer_expired (data)
+ *
+ *
+ *
+ */
+static void irlap_wd_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, WD_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irda_backoff_timer_expired (data)
+ *
+ *
+ *
+ */
+static void irlap_backoff_timer_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+ IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+ irlap_do_event(self, BACKOFF_TIMER_EXPIRED, NULL, NULL);
+}
+
+
+/*
+ * Function irtty_media_busy_expired (data)
+ *
+ *
+ */
+static void irlap_media_busy_expired(void *data)
+{
+ struct irlap_cb *self = (struct irlap_cb *) data;
+
+ IRDA_ASSERT(self != NULL, return;);
+
+ irda_device_set_media_busy(self->netdev, FALSE);
+ /* Note : the LAP event will be send in irlap_stop_mbusy_timer(),
+ * to catch other cases where the flag is cleared (for example
+ * after a discovery) - Jean II */
+}
diff --git a/net/irda/wrapper.c b/net/irda/wrapper.c
new file mode 100644
index 000000000..40a0f993b
--- /dev/null
+++ b/net/irda/wrapper.c
@@ -0,0 +1,492 @@
+/*********************************************************************
+ *
+ * Filename: wrapper.c
+ * Version: 1.2
+ * Description: IrDA SIR async wrapper layer
+ * Status: Stable
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Mon Aug 4 20:40:53 1997
+ * Modified at: Fri Jan 28 13:21:09 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ * Modified at: Fri May 28 3:11 CST 1999
+ * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ * All Rights Reserved.
+ * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+
+/************************** FRAME WRAPPING **************************/
+/*
+ * Unwrap and unstuff SIR frames
+ *
+ * Note : at FIR and MIR, HDLC framing is used and usually handled
+ * by the controller, so we come here only for SIR... Jean II
+ */
+
+/*
+ * Function stuff_byte (byte, buf)
+ *
+ * Byte stuff one single byte and put the result in buffer pointed to by
+ * buf. The buffer must at all times be able to have two bytes inserted.
+ *
+ * This is in a tight loop, better inline it, so need to be prior to callers.
+ * (2000 bytes on P6 200MHz, non-inlined ~370us, inline ~170us) - Jean II
+ */
+static inline int stuff_byte(__u8 byte, __u8 *buf)
+{
+ switch (byte) {
+ case BOF: /* FALLTHROUGH */
+ case EOF: /* FALLTHROUGH */
+ case CE:
+ /* Insert transparently coded */
+ buf[0] = CE; /* Send link escape */
+ buf[1] = byte^IRDA_TRANS; /* Complement bit 5 */
+ return 2;
+ /* break; */
+ default:
+ /* Non-special value, no transparency required */
+ buf[0] = byte;
+ return 1;
+ /* break; */
+ }
+}
+
+/*
+ * Function async_wrap (skb, *tx_buff, buffsize)
+ *
+ * Makes a new buffer with wrapping and stuffing, should check that
+ * we don't get tx buffer overflow.
+ */
+int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize)
+{
+ struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+ int xbofs;
+ int i;
+ int n;
+ union {
+ __u16 value;
+ __u8 bytes[2];
+ } fcs;
+
+ /* Initialize variables */
+ fcs.value = INIT_FCS;
+ n = 0;
+
+ /*
+ * Send XBOF's for required min. turn time and for the negotiated
+ * additional XBOFS
+ */
+
+ if (cb->magic != LAP_MAGIC) {
+ /*
+ * This will happen for all frames sent from user-space.
+ * Nothing to worry about, but we set the default number of
+ * BOF's
+ */
+ pr_debug("%s(), wrong magic in skb!\n", __func__);
+ xbofs = 10;
+ } else
+ xbofs = cb->xbofs + cb->xbofs_delay;
+
+ pr_debug("%s(), xbofs=%d\n", __func__, xbofs);
+
+ /* Check that we never use more than 115 + 48 xbofs */
+ if (xbofs > 163) {
+ pr_debug("%s(), too many xbofs (%d)\n", __func__,
+ xbofs);
+ xbofs = 163;
+ }
+
+ memset(tx_buff + n, XBOF, xbofs);
+ n += xbofs;
+
+ /* Start of packet character BOF */
+ tx_buff[n++] = BOF;
+
+ /* Insert frame and calc CRC */
+ for (i=0; i < skb->len; i++) {
+ /*
+ * Check for the possibility of tx buffer overflow. We use
+ * bufsize-5 since the maximum number of bytes that can be
+ * transmitted after this point is 5.
+ */
+ if(n >= (buffsize-5)) {
+ net_err_ratelimited("%s(), tx buffer overflow (n=%d)\n",
+ __func__, n);
+ return n;
+ }
+
+ n += stuff_byte(skb->data[i], tx_buff+n);
+ fcs.value = irda_fcs(fcs.value, skb->data[i]);
+ }
+
+ /* Insert CRC in little endian format (LSB first) */
+ fcs.value = ~fcs.value;
+#ifdef __LITTLE_ENDIAN
+ n += stuff_byte(fcs.bytes[0], tx_buff+n);
+ n += stuff_byte(fcs.bytes[1], tx_buff+n);
+#else /* ifdef __BIG_ENDIAN */
+ n += stuff_byte(fcs.bytes[1], tx_buff+n);
+ n += stuff_byte(fcs.bytes[0], tx_buff+n);
+#endif
+ tx_buff[n++] = EOF;
+
+ return n;
+}
+EXPORT_SYMBOL(async_wrap_skb);
+
+/************************* FRAME UNWRAPPING *************************/
+/*
+ * Unwrap and unstuff SIR frames
+ *
+ * Complete rewrite by Jean II :
+ * More inline, faster, more compact, more logical. Jean II
+ * (16 bytes on P6 200MHz, old 5 to 7 us, new 4 to 6 us)
+ * (24 bytes on P6 200MHz, old 9 to 10 us, new 7 to 8 us)
+ * (for reference, 115200 b/s is 1 byte every 69 us)
+ * And reduce wrapper.o by ~900B in the process ;-)
+ *
+ * Then, we have the addition of ZeroCopy, which is optional
+ * (i.e. the driver must initiate it) and improve final processing.
+ * (2005 B frame + EOF on P6 200MHz, without 30 to 50 us, with 10 to 25 us)
+ *
+ * Note : at FIR and MIR, HDLC framing is used and usually handled
+ * by the controller, so we come here only for SIR... Jean II
+ */
+
+/*
+ * We can also choose where we want to do the CRC calculation. We can
+ * do it "inline", as we receive the bytes, or "postponed", when
+ * receiving the End-Of-Frame.
+ * (16 bytes on P6 200MHz, inlined 4 to 6 us, postponed 4 to 5 us)
+ * (24 bytes on P6 200MHz, inlined 7 to 8 us, postponed 5 to 7 us)
+ * With ZeroCopy :
+ * (2005 B frame on P6 200MHz, inlined 10 to 25 us, postponed 140 to 180 us)
+ * Without ZeroCopy :
+ * (2005 B frame on P6 200MHz, inlined 30 to 50 us, postponed 150 to 180 us)
+ * (Note : numbers taken with irq disabled)
+ *
+ * From those numbers, it's not clear which is the best strategy, because
+ * we end up running through a lot of data one way or another (i.e. cache
+ * misses). I personally prefer to avoid the huge latency spike of the
+ * "postponed" solution, because it come just at the time when we have
+ * lot's of protocol processing to do and it will hurt our ability to
+ * reach low link turnaround times... Jean II
+ */
+//#define POSTPONE_RX_CRC
+
+/*
+ * Function async_bump (buf, len, stats)
+ *
+ * Got a frame, make a copy of it, and pass it up the stack! We can try
+ * to inline it since it's only called from state_inside_frame
+ */
+static inline void
+async_bump(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff)
+{
+ struct sk_buff *newskb;
+ struct sk_buff *dataskb;
+ int docopy;
+
+ /* Check if we need to copy the data to a new skb or not.
+ * If the driver doesn't use ZeroCopy Rx, we have to do it.
+ * With ZeroCopy Rx, the rx_buff already point to a valid
+ * skb. But, if the frame is small, it is more efficient to
+ * copy it to save memory (copy will be fast anyway - that's
+ * called Rx-copy-break). Jean II */
+ docopy = ((rx_buff->skb == NULL) ||
+ (rx_buff->len < IRDA_RX_COPY_THRESHOLD));
+
+ /* Allocate a new skb */
+ newskb = dev_alloc_skb(docopy ? rx_buff->len + 1 : rx_buff->truesize);
+ if (!newskb) {
+ stats->rx_dropped++;
+ /* We could deliver the current skb if doing ZeroCopy Rx,
+ * but this would stall the Rx path. Better drop the
+ * packet... Jean II */
+ return;
+ }
+
+ /* Align IP header to 20 bytes (i.e. increase skb->data)
+ * Note this is only useful with IrLAN, as PPP has a variable
+ * header size (2 or 1 bytes) - Jean II */
+ skb_reserve(newskb, 1);
+
+ if(docopy) {
+ /* Copy data without CRC (length already checked) */
+ skb_copy_to_linear_data(newskb, rx_buff->data,
+ rx_buff->len - 2);
+ /* Deliver this skb */
+ dataskb = newskb;
+ } else {
+ /* We are using ZeroCopy. Deliver old skb */
+ dataskb = rx_buff->skb;
+ /* And hook the new skb to the rx_buff */
+ rx_buff->skb = newskb;
+ rx_buff->head = newskb->data; /* NOT newskb->head */
+ //printk(KERN_DEBUG "ZeroCopy : len = %d, dataskb = %p, newskb = %p\n", rx_buff->len, dataskb, newskb);
+ }
+
+ /* Set proper length on skb (without CRC) */
+ skb_put(dataskb, rx_buff->len - 2);
+
+ /* Feed it to IrLAP layer */
+ dataskb->dev = dev;
+ skb_reset_mac_header(dataskb);
+ dataskb->protocol = htons(ETH_P_IRDA);
+
+ netif_rx(dataskb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += rx_buff->len;
+
+ /* Clean up rx_buff (redundant with async_unwrap_bof() ???) */
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+}
+
+/*
+ * Function async_unwrap_bof(dev, byte)
+ *
+ * Handle Beginning Of Frame character received within a frame
+ *
+ */
+static inline void
+async_unwrap_bof(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff, __u8 byte)
+{
+ switch(rx_buff->state) {
+ case LINK_ESCAPE:
+ case INSIDE_FRAME:
+ /* Not supposed to happen, the previous frame is not
+ * finished - Jean II */
+ pr_debug("%s(), Discarding incomplete frame\n",
+ __func__);
+ stats->rx_errors++;
+ stats->rx_missed_errors++;
+ irda_device_set_media_busy(dev, TRUE);
+ break;
+
+ case OUTSIDE_FRAME:
+ case BEGIN_FRAME:
+ default:
+ /* We may receive multiple BOF at the start of frame */
+ break;
+ }
+
+ /* Now receiving frame */
+ rx_buff->state = BEGIN_FRAME;
+ rx_buff->in_frame = TRUE;
+
+ /* Time to initialize receive buffer */
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+ rx_buff->fcs = INIT_FCS;
+}
+
+/*
+ * Function async_unwrap_eof(dev, byte)
+ *
+ * Handle End Of Frame character received within a frame
+ *
+ */
+static inline void
+async_unwrap_eof(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff, __u8 byte)
+{
+#ifdef POSTPONE_RX_CRC
+ int i;
+#endif
+
+ switch(rx_buff->state) {
+ case OUTSIDE_FRAME:
+ /* Probably missed the BOF */
+ stats->rx_errors++;
+ stats->rx_missed_errors++;
+ irda_device_set_media_busy(dev, TRUE);
+ break;
+
+ case BEGIN_FRAME:
+ case LINK_ESCAPE:
+ case INSIDE_FRAME:
+ default:
+ /* Note : in the case of BEGIN_FRAME and LINK_ESCAPE,
+ * the fcs will most likely not match and generate an
+ * error, as expected - Jean II */
+ rx_buff->state = OUTSIDE_FRAME;
+ rx_buff->in_frame = FALSE;
+
+#ifdef POSTPONE_RX_CRC
+ /* If we haven't done the CRC as we receive bytes, we
+ * must do it now... Jean II */
+ for(i = 0; i < rx_buff->len; i++)
+ rx_buff->fcs = irda_fcs(rx_buff->fcs,
+ rx_buff->data[i]);
+#endif
+
+ /* Test FCS and signal success if the frame is good */
+ if (rx_buff->fcs == GOOD_FCS) {
+ /* Deliver frame */
+ async_bump(dev, stats, rx_buff);
+ break;
+ } else {
+ /* Wrong CRC, discard frame! */
+ irda_device_set_media_busy(dev, TRUE);
+
+ pr_debug("%s(), crc error\n", __func__);
+ stats->rx_errors++;
+ stats->rx_crc_errors++;
+ }
+ break;
+ }
+}
+
+/*
+ * Function async_unwrap_ce(dev, byte)
+ *
+ * Handle Character Escape character received within a frame
+ *
+ */
+static inline void
+async_unwrap_ce(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff, __u8 byte)
+{
+ switch(rx_buff->state) {
+ case OUTSIDE_FRAME:
+ /* Activate carrier sense */
+ irda_device_set_media_busy(dev, TRUE);
+ break;
+
+ case LINK_ESCAPE:
+ net_warn_ratelimited("%s: state not defined\n", __func__);
+ break;
+
+ case BEGIN_FRAME:
+ case INSIDE_FRAME:
+ default:
+ /* Stuffed byte coming */
+ rx_buff->state = LINK_ESCAPE;
+ break;
+ }
+}
+
+/*
+ * Function async_unwrap_other(dev, byte)
+ *
+ * Handle other characters received within a frame
+ *
+ */
+static inline void
+async_unwrap_other(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff, __u8 byte)
+{
+ switch(rx_buff->state) {
+ /* This is on the critical path, case are ordered by
+ * probability (most frequent first) - Jean II */
+ case INSIDE_FRAME:
+ /* Must be the next byte of the frame */
+ if (rx_buff->len < rx_buff->truesize) {
+ rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+ rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+ } else {
+ pr_debug("%s(), Rx buffer overflow, aborting\n",
+ __func__);
+ rx_buff->state = OUTSIDE_FRAME;
+ }
+ break;
+
+ case LINK_ESCAPE:
+ /*
+ * Stuffed char, complement bit 5 of byte
+ * following CE, IrLAP p.114
+ */
+ byte ^= IRDA_TRANS;
+ if (rx_buff->len < rx_buff->truesize) {
+ rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+ rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+ rx_buff->state = INSIDE_FRAME;
+ } else {
+ pr_debug("%s(), Rx buffer overflow, aborting\n",
+ __func__);
+ rx_buff->state = OUTSIDE_FRAME;
+ }
+ break;
+
+ case OUTSIDE_FRAME:
+ /* Activate carrier sense */
+ if(byte != XBOF)
+ irda_device_set_media_busy(dev, TRUE);
+ break;
+
+ case BEGIN_FRAME:
+ default:
+ rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+ rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+ rx_buff->state = INSIDE_FRAME;
+ break;
+ }
+}
+
+/*
+ * Function async_unwrap_char (dev, rx_buff, byte)
+ *
+ * Parse and de-stuff frame received from the IrDA-port
+ *
+ * This is the main entry point for SIR drivers.
+ */
+void async_unwrap_char(struct net_device *dev,
+ struct net_device_stats *stats,
+ iobuff_t *rx_buff, __u8 byte)
+{
+ switch(byte) {
+ case CE:
+ async_unwrap_ce(dev, stats, rx_buff, byte);
+ break;
+ case BOF:
+ async_unwrap_bof(dev, stats, rx_buff, byte);
+ break;
+ case EOF:
+ async_unwrap_eof(dev, stats, rx_buff, byte);
+ break;
+ default:
+ async_unwrap_other(dev, stats, rx_buff, byte);
+ break;
+ }
+}
+EXPORT_SYMBOL(async_unwrap_char);
+