Initial import

1 files changed, 109 insertions, 0 deletions

diff --git a/net/l2tp/Kconfig b/net/l2tp/Kconfig
new file mode 100644
index 000000000..378c73b26
--- /dev/null
+++ b/net/l2tp/Kconfig
@@ -0,0 +1,109 @@
+#
+# Layer Two Tunneling Protocol (L2TP)
+#
+
+menuconfig L2TP
+	tristate "Layer Two Tunneling Protocol (L2TP)"
+	depends on (IPV6 || IPV6=n)
+	depends on INET
+	select NET_UDP_TUNNEL
+	---help---
+	  Layer Two Tunneling Protocol
+
+	  From RFC 2661 <http://www.ietf.org/rfc/rfc2661.txt>.
+
+	  L2TP facilitates the tunneling of packets across an
+	  intervening network in a way that is as transparent as
+	  possible to both end-users and applications.
+
+	  L2TP is often used to tunnel PPP traffic over IP
+	  tunnels. One IP tunnel may carry thousands of individual PPP
+	  connections. L2TP is also used as a VPN protocol, popular
+	  with home workers to connect to their offices.
+
+	  L2TPv3 allows other protocols as well as PPP to be carried
+	  over L2TP tunnels. L2TPv3 is defined in RFC 3931
+	  <http://www.ietf.org/rfc/rfc3931.txt>.
+
+	  The kernel component handles only L2TP data packets: a
+	  userland daemon handles L2TP the control protocol (tunnel
+	  and session setup). One such daemon is OpenL2TP
+	  (http://openl2tp.org/).
+
+	  If you don't need L2TP, say N. To compile all L2TP code as
+	  modules, choose M here.
+
+config L2TP_DEBUGFS
+	tristate "L2TP debugfs support"
+	depends on L2TP && DEBUG_FS
+	help
+	  Support for l2tp directory in debugfs filesystem. This may be
+	  used to dump internal state of the l2tp drivers for problem
+	  analysis.
+
+	  If unsure, say 'Y'.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called l2tp_debugfs.
+
+config L2TP_V3
+	bool "L2TPv3 support"
+	depends on L2TP
+	help
+	  Layer Two Tunneling Protocol Version 3
+
+	  From RFC 3931 <http://www.ietf.org/rfc/rfc3931.txt>.
+
+	  The Layer Two Tunneling Protocol (L2TP) provides a dynamic
+	  mechanism for tunneling Layer 2 (L2) "circuits" across a
+	  packet-oriented data network (e.g., over IP).  L2TP, as
+	  originally defined in RFC 2661, is a standard method for
+	  tunneling Point-to-Point Protocol (PPP) [RFC1661] sessions.
+	  L2TP has since been adopted for tunneling a number of other
+	  L2 protocols, including ATM, Frame Relay, HDLC and even raw
+	  ethernet frames.
+
+	  If you are connecting to L2TPv3 equipment, or you want to
+	  tunnel raw ethernet frames using L2TP, say Y here. If
+	  unsure, say N.
+
+config L2TP_IP
+	tristate "L2TP IP encapsulation for L2TPv3"
+	depends on L2TP_V3
+	help
+	  Support for L2TP-over-IP socket family.
+
+	  The L2TPv3 protocol defines two possible encapsulations for
+	  L2TP frames, namely UDP and plain IP (without UDP). This
+	  driver provides a new L2TPIP socket family with which
+	  userspace L2TPv3 daemons may create L2TP/IP tunnel sockets
+	  when UDP encapsulation is not required. When L2TP is carried
+	  in IP packets, it used IP protocol number 115, so this port
+	  must be enabled in firewalls.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called l2tp_ip.
+
+config L2TP_ETH
+	tristate "L2TP ethernet pseudowire support for L2TPv3"
+	depends on L2TP_V3
+	help
+	  Support for carrying raw ethernet frames over L2TPv3.
+
+	  From RFC 4719 <http://www.ietf.org/rfc/rfc4719.txt>.
+
+	  The Layer 2 Tunneling Protocol, Version 3 (L2TPv3) can be
+	  used as a control protocol and for data encapsulation to set
+	  up Pseudowires for transporting layer 2 Packet Data Units
+	  across an IP network [RFC3931].
+
+	  This driver provides an ethernet virtual interface for each
+	  L2TP ethernet pseudowire instance. Standard Linux tools may
+	  be used to assign an IP address to the local virtual
+	  interface, or add the interface to a bridge.
+
+	  If you are using L2TPv3, you will almost certainly want to
+	  enable this option.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called l2tp_eth.