Initial import

1 files changed, 279 insertions, 0 deletions

diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
new file mode 100644
index 000000000..092300b30
--- /dev/null
+++ b/net/wireless/mesh.c
@@ -0,0 +1,279 @@
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+#include "rdev-ops.h"
+
+/* Default values, timeouts in ms */
+#define MESH_TTL 		31
+#define MESH_DEFAULT_ELEMENT_TTL 31
+#define MESH_MAX_RETR	 	3
+#define MESH_RET_T 		100
+#define MESH_CONF_T 		100
+#define MESH_HOLD_T 		100
+
+#define MESH_PATH_TIMEOUT	5000
+#define MESH_RANN_INTERVAL      5000
+#define MESH_PATH_TO_ROOT_TIMEOUT      6000
+#define MESH_ROOT_INTERVAL     5000
+#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
+#define MESH_DEFAULT_PLINK_TIMEOUT	1800 /* timeout in seconds */
+
+/*
+ * Minimum interval between two consecutive PREQs originated by the same
+ * interface
+ */
+#define MESH_PREQ_MIN_INT	10
+#define MESH_PERR_MIN_INT	100
+#define MESH_DIAM_TRAVERSAL_TIME 50
+
+#define MESH_RSSI_THRESHOLD	0
+
+/*
+ * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
+ * before timing out.  This way it will remain ACTIVE and no data frames
+ * will be unnecessarily held in the pending queue.
+ */
+#define MESH_PATH_REFRESH_TIME			1000
+#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+
+/* Default maximum number of established plinks per interface */
+#define MESH_MAX_ESTAB_PLINKS	32
+
+#define MESH_MAX_PREQ_RETRIES	4
+
+#define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50
+
+#define MESH_DEFAULT_BEACON_INTERVAL	1000	/* in 1024 us units (=TUs) */
+#define MESH_DEFAULT_DTIM_PERIOD	2
+#define MESH_DEFAULT_AWAKE_WINDOW	10	/* in 1024 us units (=TUs) */
+
+const struct mesh_config default_mesh_config = {
+	.dot11MeshRetryTimeout = MESH_RET_T,
+	.dot11MeshConfirmTimeout = MESH_CONF_T,
+	.dot11MeshHoldingTimeout = MESH_HOLD_T,
+	.dot11MeshMaxRetries = MESH_MAX_RETR,
+	.dot11MeshTTL = MESH_TTL,
+	.element_ttl = MESH_DEFAULT_ELEMENT_TTL,
+	.auto_open_plinks = true,
+	.dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
+	.dot11MeshNbrOffsetMaxNeighbor = MESH_SYNC_NEIGHBOR_OFFSET_MAX,
+	.dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
+	.dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
+	.dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT,
+	.dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
+	.dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
+	.path_refresh_time = MESH_PATH_REFRESH_TIME,
+	.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
+	.dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL,
+	.dot11MeshGateAnnouncementProtocol = false,
+	.dot11MeshForwarding = true,
+	.rssi_threshold = MESH_RSSI_THRESHOLD,
+	.ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
+	.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
+	.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
+	.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
+	.power_mode = NL80211_MESH_POWER_ACTIVE,
+	.dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW,
+	.plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT,
+};
+
+const struct mesh_setup default_mesh_setup = {
+	/* cfg80211_join_mesh() will pick a channel if needed */
+	.sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
+	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
+	.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
+	.auth_id = 0, /* open */
+	.ie = NULL,
+	.ie_len = 0,
+	.is_secure = false,
+	.user_mpm = false,
+	.beacon_interval = MESH_DEFAULT_BEACON_INTERVAL,
+	.dtim_period = MESH_DEFAULT_DTIM_PERIOD,
+};
+
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev,
+			 struct mesh_setup *setup,
+			 const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
+	      setup->is_secure)
+		return -EOPNOTSUPP;
+
+	if (wdev->mesh_id_len)
+		return -EALREADY;
+
+	if (!setup->mesh_id_len)
+		return -EINVAL;
+
+	if (!rdev->ops->join_mesh)
+		return -EOPNOTSUPP;
+
+	if (!setup->chandef.chan) {
+		/* if no channel explicitly given, use preset channel */
+		setup->chandef = wdev->preset_chandef;
+	}
+
+	if (!setup->chandef.chan) {
+		/* if we don't have that either, use the first usable channel */
+		enum ieee80211_band band;
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			struct ieee80211_supported_band *sband;
+			struct ieee80211_channel *chan;
+			int i;
+
+			sband = rdev->wiphy.bands[band];
+			if (!sband)
+				continue;
+
+			for (i = 0; i < sband->n_channels; i++) {
+				chan = &sband->channels[i];
+				if (chan->flags & (IEEE80211_CHAN_NO_IR |
+						   IEEE80211_CHAN_DISABLED |
+						   IEEE80211_CHAN_RADAR))
+					continue;
+				setup->chandef.chan = chan;
+				break;
+			}
+
+			if (setup->chandef.chan)
+				break;
+		}
+
+		/* no usable channel ... */
+		if (!setup->chandef.chan)
+			return -EINVAL;
+
+		setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+		setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
+	}
+
+	/*
+	 * check if basic rates are available otherwise use mandatory rates as
+	 * basic rates
+	 */
+	if (!setup->basic_rates) {
+		enum nl80211_bss_scan_width scan_width;
+		struct ieee80211_supported_band *sband =
+				rdev->wiphy.bands[setup->chandef.chan->band];
+		scan_width = cfg80211_chandef_to_scan_width(&setup->chandef);
+		setup->basic_rates = ieee80211_mandatory_rates(sband,
+							       scan_width);
+	}
+
+	if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
+				     NL80211_IFTYPE_MESH_POINT))
+		return -EINVAL;
+
+	err = rdev_join_mesh(rdev, dev, conf, setup);
+	if (!err) {
+		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
+		wdev->mesh_id_len = setup->mesh_id_len;
+		wdev->chandef = setup->chandef;
+	}
+
+	return err;
+}
+
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       struct mesh_setup *setup,
+		       const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_join_mesh(rdev, dev, setup, conf);
+	wdev_unlock(wdev);
+
+	return err;
+}
+
+int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
+			      struct wireless_dev *wdev,
+			      struct cfg80211_chan_def *chandef)
+{
+	int err;
+
+	/*
+	 * Workaround for libertas (only!), it puts the interface
+	 * into mesh mode but doesn't implement join_mesh. Instead,
+	 * it is configured via sysfs and then joins the mesh when
+	 * you set the channel. Note that the libertas mesh isn't
+	 * compatible with 802.11 mesh.
+	 */
+	if (rdev->ops->libertas_set_mesh_channel) {
+		if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
+			return -EINVAL;
+
+		if (!netif_running(wdev->netdev))
+			return -ENETDOWN;
+
+		err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev,
+						     chandef->chan);
+		if (!err)
+			wdev->chandef = *chandef;
+
+		return err;
+	}
+
+	if (wdev->mesh_id_len)
+		return -EBUSY;
+
+	wdev->preset_chandef = *chandef;
+	return 0;
+}
+
+int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+			  struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->leave_mesh)
+		return -EOPNOTSUPP;
+
+	if (!wdev->mesh_id_len)
+		return -ENOTCONN;
+
+	err = rdev_leave_mesh(rdev, dev);
+	if (!err) {
+		wdev->mesh_id_len = 0;
+		memset(&wdev->chandef, 0, sizeof(wdev->chandef));
+		rdev_set_qos_map(rdev, dev, NULL);
+	}
+
+	return err;
+}
+
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+			struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_leave_mesh(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}