summaryrefslogtreecommitdiff
path: root/sound/firewire/bebob/bebob_maudio.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /sound/firewire/bebob/bebob_maudio.c
Initial import
Diffstat (limited to 'sound/firewire/bebob/bebob_maudio.c')
-rw-r--r--sound/firewire/bebob/bebob_maudio.c788
1 files changed, 788 insertions, 0 deletions
diff --git a/sound/firewire/bebob/bebob_maudio.c b/sound/firewire/bebob/bebob_maudio.c
new file mode 100644
index 000000000..9ee25a63f
--- /dev/null
+++ b/sound/firewire/bebob/bebob_maudio.c
@@ -0,0 +1,788 @@
+/*
+ * bebob_maudio.c - a part of driver for BeBoB based devices
+ *
+ * Copyright (c) 2013-2014 Takashi Sakamoto
+ *
+ * Licensed under the terms of the GNU General Public License, version 2.
+ */
+
+#include "./bebob.h"
+#include <sound/control.h>
+
+/*
+ * Just powering on, Firewire 410/Audiophile/1814 and ProjectMix I/O wait to
+ * download firmware blob. To enable these devices, drivers should upload
+ * firmware blob and send a command to initialize configuration to factory
+ * settings when completing uploading. Then these devices generate bus reset
+ * and are recognized as new devices with the firmware.
+ *
+ * But with firmware version 5058 or later, the firmware is stored to flash
+ * memory in the device and drivers can tell bootloader to load the firmware
+ * by sending a cue. This cue must be sent one time.
+ *
+ * For streaming, both of output and input streams are needed for Firewire 410
+ * and Ozonic. The single stream is OK for the other devices even if the clock
+ * source is not SYT-Match (I note no devices use SYT-Match).
+ *
+ * Without streaming, the devices except for Firewire Audiophile can mix any
+ * input and output. For this reason, Audiophile cannot be used as standalone
+ * mixer.
+ *
+ * Firewire 1814 and ProjectMix I/O uses special firmware. It will be freezed
+ * when receiving any commands which the firmware can't understand. These
+ * devices utilize completely different system to control. It is some
+ * write-transaction directly into a certain address. All of addresses for mixer
+ * functionality is between 0xffc700700000 to 0xffc70070009c.
+ */
+
+/* Offset from information register */
+#define INFO_OFFSET_SW_DATE 0x20
+
+/* Bootloader Protocol Version 1 */
+#define MAUDIO_BOOTLOADER_CUE1 0x00000001
+/*
+ * Initializing configuration to factory settings (= 0x1101), (swapped in line),
+ * Command code is zero (= 0x00),
+ * the number of operands is zero (= 0x00)(at least significant byte)
+ */
+#define MAUDIO_BOOTLOADER_CUE2 0x01110000
+/* padding */
+#define MAUDIO_BOOTLOADER_CUE3 0x00000000
+
+#define MAUDIO_SPECIFIC_ADDRESS 0xffc700000000ULL
+
+#define METER_OFFSET 0x00600000
+
+/* some device has sync info after metering data */
+#define METER_SIZE_SPECIAL 84 /* with sync info */
+#define METER_SIZE_FW410 76 /* with sync info */
+#define METER_SIZE_AUDIOPHILE 60 /* with sync info */
+#define METER_SIZE_SOLO 52 /* with sync info */
+#define METER_SIZE_OZONIC 48
+#define METER_SIZE_NRV10 80
+
+/* labels for metering */
+#define ANA_IN "Analog In"
+#define ANA_OUT "Analog Out"
+#define DIG_IN "Digital In"
+#define SPDIF_IN "S/PDIF In"
+#define ADAT_IN "ADAT In"
+#define DIG_OUT "Digital Out"
+#define SPDIF_OUT "S/PDIF Out"
+#define ADAT_OUT "ADAT Out"
+#define STRM_IN "Stream In"
+#define AUX_OUT "Aux Out"
+#define HP_OUT "HP Out"
+/* for NRV */
+#define UNKNOWN_METER "Unknown"
+
+struct special_params {
+ bool is1814;
+ unsigned int clk_src;
+ unsigned int dig_in_fmt;
+ unsigned int dig_out_fmt;
+ unsigned int clk_lock;
+ struct snd_ctl_elem_id *ctl_id_sync;
+};
+
+/*
+ * For some M-Audio devices, this module just send cue to load firmware. After
+ * loading, the device generates bus reset and newly detected.
+ *
+ * If we make any transactions to load firmware, the operation may failed.
+ */
+int snd_bebob_maudio_load_firmware(struct fw_unit *unit)
+{
+ struct fw_device *device = fw_parent_device(unit);
+ int err, rcode;
+ u64 date;
+ __le32 cues[3] = {
+ cpu_to_le32(MAUDIO_BOOTLOADER_CUE1),
+ cpu_to_le32(MAUDIO_BOOTLOADER_CUE2),
+ cpu_to_le32(MAUDIO_BOOTLOADER_CUE3)
+ };
+
+ /* check date of software used to build */
+ err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE,
+ &date, sizeof(u64));
+ if (err < 0)
+ goto end;
+ /*
+ * firmware version 5058 or later has date later than "20070401", but
+ * 'date' is not null-terminated.
+ */
+ if (date < 0x3230303730343031LL) {
+ dev_err(&unit->device,
+ "Use firmware version 5058 or later\n");
+ err = -ENOSYS;
+ goto end;
+ }
+
+ rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST,
+ device->node_id, device->generation,
+ device->max_speed, BEBOB_ADDR_REG_REQ,
+ cues, sizeof(cues));
+ if (rcode != RCODE_COMPLETE) {
+ dev_err(&unit->device,
+ "Failed to send a cue to load firmware\n");
+ err = -EIO;
+ }
+end:
+ return err;
+}
+
+static inline int
+get_meter(struct snd_bebob *bebob, void *buf, unsigned int size)
+{
+ return snd_fw_transaction(bebob->unit, TCODE_READ_BLOCK_REQUEST,
+ MAUDIO_SPECIFIC_ADDRESS + METER_OFFSET,
+ buf, size, 0);
+}
+
+static int
+check_clk_sync(struct snd_bebob *bebob, unsigned int size, bool *sync)
+{
+ int err;
+ u8 *buf;
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ err = get_meter(bebob, buf, size);
+ if (err < 0)
+ goto end;
+
+ /* if synced, this value is the same as SFC of FDF in CIP header */
+ *sync = (buf[size - 2] != 0xff);
+end:
+ kfree(buf);
+ return err;
+}
+
+/*
+ * dig_fmt: 0x00:S/PDIF, 0x01:ADAT
+ * clk_lock: 0x00:unlock, 0x01:lock
+ */
+static int
+avc_maudio_set_special_clk(struct snd_bebob *bebob, unsigned int clk_src,
+ unsigned int dig_in_fmt, unsigned int dig_out_fmt,
+ unsigned int clk_lock)
+{
+ struct special_params *params = bebob->maudio_special_quirk;
+ int err;
+ u8 *buf;
+
+ if (amdtp_stream_running(&bebob->rx_stream) ||
+ amdtp_stream_running(&bebob->tx_stream))
+ return -EBUSY;
+
+ buf = kmalloc(12, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ buf[0] = 0x00; /* CONTROL */
+ buf[1] = 0xff; /* UNIT */
+ buf[2] = 0x00; /* vendor dependent */
+ buf[3] = 0x04; /* company ID high */
+ buf[4] = 0x00; /* company ID middle */
+ buf[5] = 0x04; /* company ID low */
+ buf[6] = 0xff & clk_src; /* clock source */
+ buf[7] = 0xff & dig_in_fmt; /* input digital format */
+ buf[8] = 0xff & dig_out_fmt; /* output digital format */
+ buf[9] = 0xff & clk_lock; /* lock these settings */
+ buf[10] = 0x00; /* padding */
+ buf[11] = 0x00; /* padding */
+
+ err = fcp_avc_transaction(bebob->unit, buf, 12, buf, 12,
+ BIT(1) | BIT(2) | BIT(3) | BIT(4) |
+ BIT(5) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(9));
+ if ((err > 0) && (err < 10))
+ err = -EIO;
+ else if (buf[0] == 0x08) /* NOT IMPLEMENTED */
+ err = -ENOSYS;
+ else if (buf[0] == 0x0a) /* REJECTED */
+ err = -EINVAL;
+ if (err < 0)
+ goto end;
+
+ params->clk_src = buf[6];
+ params->dig_in_fmt = buf[7];
+ params->dig_out_fmt = buf[8];
+ params->clk_lock = buf[9];
+
+ if (params->ctl_id_sync)
+ snd_ctl_notify(bebob->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ params->ctl_id_sync);
+
+ err = 0;
+end:
+ kfree(buf);
+ return err;
+}
+static void
+special_stream_formation_set(struct snd_bebob *bebob)
+{
+ static const unsigned int ch_table[2][2][3] = {
+ /* AMDTP_OUT_STREAM */
+ { { 6, 6, 4 }, /* SPDIF */
+ { 12, 8, 4 } }, /* ADAT */
+ /* AMDTP_IN_STREAM */
+ { { 10, 10, 2 }, /* SPDIF */
+ { 16, 12, 2 } } /* ADAT */
+ };
+ struct special_params *params = bebob->maudio_special_quirk;
+ unsigned int i, max;
+
+ max = SND_BEBOB_STRM_FMT_ENTRIES - 1;
+ if (!params->is1814)
+ max -= 2;
+
+ for (i = 0; i < max; i++) {
+ bebob->tx_stream_formations[i + 1].pcm =
+ ch_table[AMDTP_IN_STREAM][params->dig_in_fmt][i / 2];
+ bebob->tx_stream_formations[i + 1].midi = 1;
+
+ bebob->rx_stream_formations[i + 1].pcm =
+ ch_table[AMDTP_OUT_STREAM][params->dig_out_fmt][i / 2];
+ bebob->rx_stream_formations[i + 1].midi = 1;
+ }
+}
+
+static int add_special_controls(struct snd_bebob *bebob);
+int
+snd_bebob_maudio_special_discover(struct snd_bebob *bebob, bool is1814)
+{
+ struct special_params *params;
+ int err;
+
+ params = kzalloc(sizeof(struct special_params), GFP_KERNEL);
+ if (params == NULL)
+ return -ENOMEM;
+
+ mutex_lock(&bebob->mutex);
+
+ bebob->maudio_special_quirk = (void *)params;
+ params->is1814 = is1814;
+
+ /* initialize these parameters because driver is not allowed to ask */
+ bebob->rx_stream.context = ERR_PTR(-1);
+ bebob->tx_stream.context = ERR_PTR(-1);
+ err = avc_maudio_set_special_clk(bebob, 0x03, 0x00, 0x00, 0x00);
+ if (err < 0) {
+ dev_err(&bebob->unit->device,
+ "fail to initialize clock params: %d\n", err);
+ goto end;
+ }
+
+ err = add_special_controls(bebob);
+ if (err < 0)
+ goto end;
+
+ special_stream_formation_set(bebob);
+
+ if (params->is1814) {
+ bebob->midi_input_ports = 1;
+ bebob->midi_output_ports = 1;
+ } else {
+ bebob->midi_input_ports = 2;
+ bebob->midi_output_ports = 2;
+ }
+end:
+ if (err < 0) {
+ kfree(params);
+ bebob->maudio_special_quirk = NULL;
+ }
+ mutex_unlock(&bebob->mutex);
+ return err;
+}
+
+/* Input plug shows actual rate. Output plug is needless for this purpose. */
+static int special_get_rate(struct snd_bebob *bebob, unsigned int *rate)
+{
+ int err, trials;
+
+ trials = 0;
+ do {
+ err = avc_general_get_sig_fmt(bebob->unit, rate,
+ AVC_GENERAL_PLUG_DIR_IN, 0);
+ } while (err == -EAGAIN && ++trials < 3);
+
+ return err;
+}
+static int special_set_rate(struct snd_bebob *bebob, unsigned int rate)
+{
+ struct special_params *params = bebob->maudio_special_quirk;
+ int err;
+
+ err = avc_general_set_sig_fmt(bebob->unit, rate,
+ AVC_GENERAL_PLUG_DIR_OUT, 0);
+ if (err < 0)
+ goto end;
+
+ /*
+ * Just after changing sampling rate for output, a followed command
+ * for input is easy to fail. This is a workaround fot this issue.
+ */
+ msleep(100);
+
+ err = avc_general_set_sig_fmt(bebob->unit, rate,
+ AVC_GENERAL_PLUG_DIR_IN, 0);
+ if (err < 0)
+ goto end;
+
+ if (params->ctl_id_sync)
+ snd_ctl_notify(bebob->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ params->ctl_id_sync);
+end:
+ return err;
+}
+
+/* Clock source control for special firmware */
+static const char *const special_clk_labels[] = {
+ SND_BEBOB_CLOCK_INTERNAL " with Digital Mute", "Digital",
+ "Word Clock", SND_BEBOB_CLOCK_INTERNAL};
+static int special_clk_get(struct snd_bebob *bebob, unsigned int *id)
+{
+ struct special_params *params = bebob->maudio_special_quirk;
+ *id = params->clk_src;
+ return 0;
+}
+static int special_clk_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *einf)
+{
+ return snd_ctl_enum_info(einf, 1, ARRAY_SIZE(special_clk_labels),
+ special_clk_labels);
+}
+static int special_clk_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ uval->value.enumerated.item[0] = params->clk_src;
+ return 0;
+}
+static int special_clk_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ int err, id;
+
+ id = uval->value.enumerated.item[0];
+ if (id >= ARRAY_SIZE(special_clk_labels))
+ return -EINVAL;
+
+ mutex_lock(&bebob->mutex);
+
+ err = avc_maudio_set_special_clk(bebob, id,
+ params->dig_in_fmt,
+ params->dig_out_fmt,
+ params->clk_lock);
+ mutex_unlock(&bebob->mutex);
+
+ if (err >= 0)
+ err = 1;
+
+ return err;
+}
+static struct snd_kcontrol_new special_clk_ctl = {
+ .name = "Clock Source",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = special_clk_ctl_info,
+ .get = special_clk_ctl_get,
+ .put = special_clk_ctl_put
+};
+
+/* Clock synchronization control for special firmware */
+static int special_sync_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *einf)
+{
+ einf->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ einf->count = 1;
+ einf->value.integer.min = 0;
+ einf->value.integer.max = 1;
+
+ return 0;
+}
+static int special_sync_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ int err;
+ bool synced = 0;
+
+ err = check_clk_sync(bebob, METER_SIZE_SPECIAL, &synced);
+ if (err >= 0)
+ uval->value.integer.value[0] = synced;
+
+ return 0;
+}
+static struct snd_kcontrol_new special_sync_ctl = {
+ .name = "Sync Status",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ,
+ .info = special_sync_ctl_info,
+ .get = special_sync_ctl_get,
+};
+
+/* Digital input interface control for special firmware */
+static const char *const special_dig_in_iface_labels[] = {
+ "S/PDIF Optical", "S/PDIF Coaxial", "ADAT Optical"
+};
+static int special_dig_in_iface_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *einf)
+{
+ return snd_ctl_enum_info(einf, 1,
+ ARRAY_SIZE(special_dig_in_iface_labels),
+ special_dig_in_iface_labels);
+}
+static int special_dig_in_iface_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ unsigned int dig_in_iface;
+ int err, val;
+
+ mutex_lock(&bebob->mutex);
+
+ err = avc_audio_get_selector(bebob->unit, 0x00, 0x04,
+ &dig_in_iface);
+ if (err < 0) {
+ dev_err(&bebob->unit->device,
+ "fail to get digital input interface: %d\n", err);
+ goto end;
+ }
+
+ /* encoded id for user value */
+ val = (params->dig_in_fmt << 1) | (dig_in_iface & 0x01);
+
+ /* for ADAT Optical */
+ if (val > 2)
+ val = 2;
+
+ uval->value.enumerated.item[0] = val;
+end:
+ mutex_unlock(&bebob->mutex);
+ return err;
+}
+static int special_dig_in_iface_ctl_set(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ unsigned int id, dig_in_fmt, dig_in_iface;
+ int err;
+
+ id = uval->value.enumerated.item[0];
+ if (id >= ARRAY_SIZE(special_dig_in_iface_labels))
+ return -EINVAL;
+
+ /* decode user value */
+ dig_in_fmt = (id >> 1) & 0x01;
+ dig_in_iface = id & 0x01;
+
+ mutex_lock(&bebob->mutex);
+
+ err = avc_maudio_set_special_clk(bebob,
+ params->clk_src,
+ dig_in_fmt,
+ params->dig_out_fmt,
+ params->clk_lock);
+ if (err < 0)
+ goto end;
+
+ /* For ADAT, optical interface is only available. */
+ if (params->dig_in_fmt > 0) {
+ err = 1;
+ goto end;
+ }
+
+ /* For S/PDIF, optical/coaxial interfaces are selectable. */
+ err = avc_audio_set_selector(bebob->unit, 0x00, 0x04, dig_in_iface);
+ if (err < 0)
+ dev_err(&bebob->unit->device,
+ "fail to set digital input interface: %d\n", err);
+ err = 1;
+end:
+ special_stream_formation_set(bebob);
+ mutex_unlock(&bebob->mutex);
+ return err;
+}
+static struct snd_kcontrol_new special_dig_in_iface_ctl = {
+ .name = "Digital Input Interface",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = special_dig_in_iface_ctl_info,
+ .get = special_dig_in_iface_ctl_get,
+ .put = special_dig_in_iface_ctl_set
+};
+
+/* Digital output interface control for special firmware */
+static const char *const special_dig_out_iface_labels[] = {
+ "S/PDIF Optical and Coaxial", "ADAT Optical"
+};
+static int special_dig_out_iface_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *einf)
+{
+ return snd_ctl_enum_info(einf, 1,
+ ARRAY_SIZE(special_dig_out_iface_labels),
+ special_dig_out_iface_labels);
+}
+static int special_dig_out_iface_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ mutex_lock(&bebob->mutex);
+ uval->value.enumerated.item[0] = params->dig_out_fmt;
+ mutex_unlock(&bebob->mutex);
+ return 0;
+}
+static int special_dig_out_iface_ctl_set(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *uval)
+{
+ struct snd_bebob *bebob = snd_kcontrol_chip(kctl);
+ struct special_params *params = bebob->maudio_special_quirk;
+ unsigned int id;
+ int err;
+
+ id = uval->value.enumerated.item[0];
+ if (id >= ARRAY_SIZE(special_dig_out_iface_labels))
+ return -EINVAL;
+
+ mutex_lock(&bebob->mutex);
+
+ err = avc_maudio_set_special_clk(bebob,
+ params->clk_src,
+ params->dig_in_fmt,
+ id, params->clk_lock);
+ if (err >= 0) {
+ special_stream_formation_set(bebob);
+ err = 1;
+ }
+
+ mutex_unlock(&bebob->mutex);
+ return err;
+}
+static struct snd_kcontrol_new special_dig_out_iface_ctl = {
+ .name = "Digital Output Interface",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = special_dig_out_iface_ctl_info,
+ .get = special_dig_out_iface_ctl_get,
+ .put = special_dig_out_iface_ctl_set
+};
+
+static int add_special_controls(struct snd_bebob *bebob)
+{
+ struct snd_kcontrol *kctl;
+ struct special_params *params = bebob->maudio_special_quirk;
+ int err;
+
+ kctl = snd_ctl_new1(&special_clk_ctl, bebob);
+ err = snd_ctl_add(bebob->card, kctl);
+ if (err < 0)
+ goto end;
+
+ kctl = snd_ctl_new1(&special_sync_ctl, bebob);
+ err = snd_ctl_add(bebob->card, kctl);
+ if (err < 0)
+ goto end;
+ params->ctl_id_sync = &kctl->id;
+
+ kctl = snd_ctl_new1(&special_dig_in_iface_ctl, bebob);
+ err = snd_ctl_add(bebob->card, kctl);
+ if (err < 0)
+ goto end;
+
+ kctl = snd_ctl_new1(&special_dig_out_iface_ctl, bebob);
+ err = snd_ctl_add(bebob->card, kctl);
+end:
+ return err;
+}
+
+/* Hardware metering for special firmware */
+static const char *const special_meter_labels[] = {
+ ANA_IN, ANA_IN, ANA_IN, ANA_IN,
+ SPDIF_IN,
+ ADAT_IN, ADAT_IN, ADAT_IN, ADAT_IN,
+ ANA_OUT, ANA_OUT,
+ SPDIF_OUT,
+ ADAT_OUT, ADAT_OUT, ADAT_OUT, ADAT_OUT,
+ HP_OUT, HP_OUT,
+ AUX_OUT
+};
+static int
+special_meter_get(struct snd_bebob *bebob, u32 *target, unsigned int size)
+{
+ u16 *buf;
+ unsigned int i, c, channels;
+ int err;
+
+ channels = ARRAY_SIZE(special_meter_labels) * 2;
+ if (size < channels * sizeof(u32))
+ return -EINVAL;
+
+ /* omit last 4 bytes because it's clock info. */
+ buf = kmalloc(METER_SIZE_SPECIAL - 4, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ err = get_meter(bebob, (void *)buf, METER_SIZE_SPECIAL - 4);
+ if (err < 0)
+ goto end;
+
+ /* Its format is u16 and some channels are unknown. */
+ i = 0;
+ for (c = 2; c < channels + 2; c++)
+ target[i++] = be16_to_cpu(buf[c]) << 16;
+end:
+ kfree(buf);
+ return err;
+}
+
+/* last 4 bytes are omitted because it's clock info. */
+static const char *const fw410_meter_labels[] = {
+ ANA_IN, DIG_IN,
+ ANA_OUT, ANA_OUT, ANA_OUT, ANA_OUT, DIG_OUT,
+ HP_OUT
+};
+static const char *const audiophile_meter_labels[] = {
+ ANA_IN, DIG_IN,
+ ANA_OUT, ANA_OUT, DIG_OUT,
+ HP_OUT, AUX_OUT,
+};
+static const char *const solo_meter_labels[] = {
+ ANA_IN, DIG_IN,
+ STRM_IN, STRM_IN,
+ ANA_OUT, DIG_OUT
+};
+
+/* no clock info */
+static const char *const ozonic_meter_labels[] = {
+ ANA_IN, ANA_IN,
+ STRM_IN, STRM_IN,
+ ANA_OUT, ANA_OUT
+};
+/* TODO: need testers. these positions are based on authour's assumption */
+static const char *const nrv10_meter_labels[] = {
+ ANA_IN, ANA_IN, ANA_IN, ANA_IN,
+ DIG_IN,
+ ANA_OUT, ANA_OUT, ANA_OUT, ANA_OUT,
+ DIG_IN
+};
+static int
+normal_meter_get(struct snd_bebob *bebob, u32 *buf, unsigned int size)
+{
+ struct snd_bebob_meter_spec *spec = bebob->spec->meter;
+ unsigned int c, channels;
+ int err;
+
+ channels = spec->num * 2;
+ if (size < channels * sizeof(u32))
+ return -EINVAL;
+
+ err = get_meter(bebob, (void *)buf, size);
+ if (err < 0)
+ goto end;
+
+ for (c = 0; c < channels; c++)
+ be32_to_cpus(&buf[c]);
+
+ /* swap stream channels because inverted */
+ if (spec->labels == solo_meter_labels) {
+ swap(buf[4], buf[6]);
+ swap(buf[5], buf[7]);
+ }
+end:
+ return err;
+}
+
+/* for special customized devices */
+static struct snd_bebob_rate_spec special_rate_spec = {
+ .get = &special_get_rate,
+ .set = &special_set_rate,
+};
+static struct snd_bebob_clock_spec special_clk_spec = {
+ .num = ARRAY_SIZE(special_clk_labels),
+ .labels = special_clk_labels,
+ .get = &special_clk_get,
+};
+static struct snd_bebob_meter_spec special_meter_spec = {
+ .num = ARRAY_SIZE(special_meter_labels),
+ .labels = special_meter_labels,
+ .get = &special_meter_get
+};
+struct snd_bebob_spec maudio_special_spec = {
+ .clock = &special_clk_spec,
+ .rate = &special_rate_spec,
+ .meter = &special_meter_spec
+};
+
+/* Firewire 410 specification */
+static struct snd_bebob_rate_spec usual_rate_spec = {
+ .get = &snd_bebob_stream_get_rate,
+ .set = &snd_bebob_stream_set_rate,
+};
+static struct snd_bebob_meter_spec fw410_meter_spec = {
+ .num = ARRAY_SIZE(fw410_meter_labels),
+ .labels = fw410_meter_labels,
+ .get = &normal_meter_get
+};
+struct snd_bebob_spec maudio_fw410_spec = {
+ .clock = NULL,
+ .rate = &usual_rate_spec,
+ .meter = &fw410_meter_spec
+};
+
+/* Firewire Audiophile specification */
+static struct snd_bebob_meter_spec audiophile_meter_spec = {
+ .num = ARRAY_SIZE(audiophile_meter_labels),
+ .labels = audiophile_meter_labels,
+ .get = &normal_meter_get
+};
+struct snd_bebob_spec maudio_audiophile_spec = {
+ .clock = NULL,
+ .rate = &usual_rate_spec,
+ .meter = &audiophile_meter_spec
+};
+
+/* Firewire Solo specification */
+static struct snd_bebob_meter_spec solo_meter_spec = {
+ .num = ARRAY_SIZE(solo_meter_labels),
+ .labels = solo_meter_labels,
+ .get = &normal_meter_get
+};
+struct snd_bebob_spec maudio_solo_spec = {
+ .clock = NULL,
+ .rate = &usual_rate_spec,
+ .meter = &solo_meter_spec
+};
+
+/* Ozonic specification */
+static struct snd_bebob_meter_spec ozonic_meter_spec = {
+ .num = ARRAY_SIZE(ozonic_meter_labels),
+ .labels = ozonic_meter_labels,
+ .get = &normal_meter_get
+};
+struct snd_bebob_spec maudio_ozonic_spec = {
+ .clock = NULL,
+ .rate = &usual_rate_spec,
+ .meter = &ozonic_meter_spec
+};
+
+/* NRV10 specification */
+static struct snd_bebob_meter_spec nrv10_meter_spec = {
+ .num = ARRAY_SIZE(nrv10_meter_labels),
+ .labels = nrv10_meter_labels,
+ .get = &normal_meter_get
+};
+struct snd_bebob_spec maudio_nrv10_spec = {
+ .clock = NULL,
+ .rate = &usual_rate_spec,
+ .meter = &nrv10_meter_spec
+};