Initial import

1 files changed, 458 insertions, 0 deletions

diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c
new file mode 100644
index 000000000..b07954a79
--- /dev/null
+++ b/sound/oss/pas2_card.c
@@ -0,0 +1,458 @@
+/*
+ * sound/oss/pas2_card.c
+ *
+ * Detection routine for the Pro Audio Spectrum cards.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include "sound_config.h"
+
+#include "pas2.h"
+#include "sb.h"
+
+static unsigned char dma_bits[] = {
+	4, 1, 2, 3, 0, 5, 6, 7
+};
+
+static unsigned char irq_bits[] = {
+	0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
+};
+
+static unsigned char sb_irq_bits[] = {
+	0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, 
+	0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
+};
+
+static unsigned char sb_dma_bits[] = {
+	0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
+};
+
+/*
+ * The Address Translation code is used to convert I/O register addresses to
+ * be relative to the given base -register
+ */
+
+int      	pas_translate_code = 0;
+static int      pas_intr_mask;
+static int      pas_irq;
+static int      pas_sb_base;
+DEFINE_SPINLOCK(pas_lock);
+#ifndef CONFIG_PAS_JOYSTICK
+static bool	joystick;
+#else
+static bool 	joystick = 1;
+#endif
+#ifdef SYMPHONY_PAS
+static bool 	symphony = 1;
+#else
+static bool 	symphony;
+#endif
+#ifdef BROKEN_BUS_CLOCK
+static bool	broken_bus_clock = 1;
+#else
+static bool	broken_bus_clock;
+#endif
+
+static struct address_info cfg;
+static struct address_info cfg2;
+
+char            pas_model = 0;
+static char    *pas_model_names[] = {
+	"", 
+	"Pro AudioSpectrum+", 
+	"CDPC", 
+	"Pro AudioSpectrum 16", 
+	"Pro AudioSpectrum 16D"
+};
+
+/*
+ * pas_read() and pas_write() are equivalents of inb and outb 
+ * These routines perform the I/O address translation required
+ * to support other than the default base address
+ */
+
+unsigned char pas_read(int ioaddr)
+{
+	return inb(ioaddr + pas_translate_code);
+}
+
+void pas_write(unsigned char data, int ioaddr)
+{
+	outb((data), ioaddr + pas_translate_code);
+}
+
+/******************* Begin of the Interrupt Handler ********************/
+
+static irqreturn_t pasintr(int irq, void *dev_id)
+{
+	int             status;
+
+	status = pas_read(0x0B89);
+	pas_write(status, 0x0B89);	/* Clear interrupt */
+
+	if (status & 0x08)
+	{
+		  pas_pcm_interrupt(status, 1);
+		  status &= ~0x08;
+	}
+	if (status & 0x10)
+	{
+		  pas_midi_interrupt();
+		  status &= ~0x10;
+	}
+	return IRQ_HANDLED;
+}
+
+int pas_set_intr(int mask)
+{
+	if (!mask)
+		return 0;
+
+	pas_intr_mask |= mask;
+
+	pas_write(pas_intr_mask, 0x0B8B);
+	return 0;
+}
+
+int pas_remove_intr(int mask)
+{
+	if (!mask)
+		return 0;
+
+	pas_intr_mask &= ~mask;
+	pas_write(pas_intr_mask, 0x0B8B);
+
+	return 0;
+}
+
+/******************* End of the Interrupt handler **********************/
+
+/******************* Begin of the Initialization Code ******************/
+
+static int __init config_pas_hw(struct address_info *hw_config)
+{
+	char            ok = 1;
+	unsigned        int_ptrs;	/* scsi/sound interrupt pointers */
+
+	pas_irq = hw_config->irq;
+
+	pas_write(0x00, 0x0B8B);
+	pas_write(0x36, 0x138B);
+	pas_write(0x36, 0x1388);
+	pas_write(0, 0x1388);
+	pas_write(0x74, 0x138B);
+	pas_write(0x74, 0x1389);
+	pas_write(0, 0x1389);
+
+	pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
+	pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
+	pas_write(0x01 | 0x02 | 0x04 | 0x10	/*
+						 * |
+						 * 0x80
+						 */ , 0xB88);
+
+	pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
+
+	if (pas_irq < 0 || pas_irq > 15)
+	{
+		printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
+		hw_config->irq=-1;
+		ok = 0;
+	}
+	else
+	{
+		int_ptrs = pas_read(0xF38A);
+		int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
+		pas_write(int_ptrs, 0xF38A);
+		if (!irq_bits[pas_irq])
+		{
+			printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
+			hw_config->irq=-1;
+			ok = 0;
+		}
+		else
+		{
+			if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
+				printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
+				hw_config->irq=-1;
+				ok = 0;
+			}
+		}
+	}
+
+	if (hw_config->dma < 0 || hw_config->dma > 7)
+	{
+		printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
+		hw_config->dma=-1;
+		ok = 0;
+	}
+	else
+	{
+		pas_write(dma_bits[hw_config->dma], 0xF389);
+		if (!dma_bits[hw_config->dma])
+		{
+			printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
+			hw_config->dma=-1;
+			ok = 0;
+		}
+		else
+		{
+			if (sound_alloc_dma(hw_config->dma, "PAS16"))
+			{
+				printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
+				hw_config->dma=-1;
+				ok = 0;
+			}
+		}
+	}
+
+	/*
+	 * This fixes the timing problems of the PAS due to the Symphony chipset
+	 * as per Media Vision.  Only define this if your PAS doesn't work correctly.
+	 */
+
+	if(symphony)
+	{
+		outb((0x05), 0xa8);
+		outb((0x60), 0xa9);
+	}
+
+	if(broken_bus_clock)
+		pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
+	else
+		/*
+		 * pas_write(0x01, 0x8388);
+		 */
+		pas_write(0x01 | 0x10 | 0x20, 0x8388);
+
+	pas_write(0x18, 0x838A);	/* ??? */
+	pas_write(0x20 | 0x01, 0x0B8A);		/* Mute off, filter = 17.897 kHz */
+	pas_write(8, 0xBF8A);
+
+	mix_write(0x80 | 5, 0x078B);
+	mix_write(5, 0x078B);
+
+	{
+		struct address_info *sb_config;
+
+		sb_config = &cfg2;
+		if (sb_config->io_base)
+		{
+			unsigned char   irq_dma;
+
+			/*
+			 * Turn on Sound Blaster compatibility
+			 * bit 1 = SB emulation
+			 * bit 0 = MPU401 emulation (CDPC only :-( )
+			 */
+			
+			pas_write(0x02, 0xF788);
+
+			/*
+			 * "Emulation address"
+			 */
+			
+			pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
+			pas_sb_base = sb_config->io_base;
+
+			if (!sb_dma_bits[sb_config->dma])
+				printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
+
+			if (!sb_irq_bits[sb_config->irq])
+				printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
+
+			irq_dma = sb_dma_bits[sb_config->dma] |
+				sb_irq_bits[sb_config->irq];
+
+			pas_write(irq_dma, 0xFB8A);
+		}
+		else
+			pas_write(0x00, 0xF788);
+	}
+
+	if (!ok)
+		printk(KERN_WARNING "PAS16: Driver not enabled\n");
+
+	return ok;
+}
+
+static int __init detect_pas_hw(struct address_info *hw_config)
+{
+	unsigned char   board_id, foo;
+
+	/*
+	 * WARNING: Setting an option like W:1 or so that disables warm boot reset
+	 * of the card will screw up this detect code something fierce. Adding code
+	 * to handle this means possibly interfering with other cards on the bus if
+	 * you have something on base port 0x388. SO be forewarned.
+	 */
+
+	outb((0xBC), 0x9A01);	/* Activate first board */
+	outb((hw_config->io_base >> 2), 0x9A01);	/* Set base address */
+	pas_translate_code = hw_config->io_base - 0x388;
+	pas_write(1, 0xBF88);	/* Select one wait states */
+
+	board_id = pas_read(0x0B8B);
+
+	if (board_id == 0xff)
+		return 0;
+
+	/*
+	 * We probably have a PAS-series board, now check for a PAS16-series board
+	 * by trying to change the board revision bits. PAS16-series hardware won't
+	 * let you do this - the bits are read-only.
+	 */
+
+	foo = board_id ^ 0xe0;
+
+	pas_write(foo, 0x0B8B);
+	foo = pas_read(0x0B8B);
+	pas_write(board_id, 0x0B8B);
+
+	if (board_id != foo)
+		return 0;
+
+	pas_model = pas_read(0xFF88);
+
+	return pas_model;
+}
+
+static void __init attach_pas_card(struct address_info *hw_config)
+{
+	pas_irq = hw_config->irq;
+
+	if (detect_pas_hw(hw_config))
+	{
+
+		if ((pas_model = pas_read(0xFF88)))
+		{
+			char            temp[100];
+
+			if (pas_model < 0 ||
+			    pas_model >= ARRAY_SIZE(pas_model_names)) {
+				printk(KERN_ERR "pas2 unrecognized model.\n");
+				return;
+			}
+			sprintf(temp,
+			    "%s rev %d", pas_model_names[(int) pas_model],
+				    pas_read(0x2789));
+			conf_printf(temp, hw_config);
+		}
+		if (config_pas_hw(hw_config))
+		{
+			pas_pcm_init(hw_config);
+			pas_midi_init();
+			pas_init_mixer();
+		}
+	}
+}
+
+static inline int __init probe_pas(struct address_info *hw_config)
+{
+	return detect_pas_hw(hw_config);
+}
+
+static void __exit unload_pas(struct address_info *hw_config)
+{
+	extern int pas_audiodev;
+	extern int pas2_mididev;
+
+	if (hw_config->dma>0)
+		sound_free_dma(hw_config->dma);
+	if (hw_config->irq>0)
+		free_irq(hw_config->irq, hw_config);
+
+	if(pas_audiodev!=-1)
+		sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
+	if(pas2_mididev!=-1)
+	        sound_unload_mididev(pas2_mididev);
+	if(pas_audiodev!=-1)
+		sound_unload_audiodev(pas_audiodev);
+}
+
+static int __initdata io	= -1;
+static int __initdata irq	= -1;
+static int __initdata dma	= -1;
+static int __initdata dma16	= -1;	/* Set this for modules that need it */
+
+static int __initdata sb_io	= 0;
+static int __initdata sb_irq	= -1;
+static int __initdata sb_dma	= -1;
+static int __initdata sb_dma16	= -1;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(dma, int, 0);
+module_param(dma16, int, 0);
+
+module_param(sb_io, int, 0);
+module_param(sb_irq, int, 0);
+module_param(sb_dma, int, 0);
+module_param(sb_dma16, int, 0);
+
+module_param(joystick, bool, 0);
+module_param(symphony, bool, 0);
+module_param(broken_bus_clock, bool, 0);
+
+MODULE_LICENSE("GPL");
+
+static int __init init_pas2(void)
+{
+	printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
+
+	cfg.io_base = io;
+	cfg.irq = irq;
+	cfg.dma = dma;
+	cfg.dma2 = dma16;
+
+	cfg2.io_base = sb_io;
+	cfg2.irq = sb_irq;
+	cfg2.dma = sb_dma;
+	cfg2.dma2 = sb_dma16;
+
+	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
+		printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
+		return -EINVAL;
+	}
+
+	if (!probe_pas(&cfg))
+		return -ENODEV;
+	attach_pas_card(&cfg);
+
+	return 0;
+}
+
+static void __exit cleanup_pas2(void)
+{
+	unload_pas(&cfg);
+}
+
+module_init(init_pas2);
+module_exit(cleanup_pas2);
+
+#ifndef MODULE
+static int __init setup_pas2(char *str)
+{
+	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
+	int ints[9];
+	
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+
+	io	= ints[1];
+	irq	= ints[2];
+	dma	= ints[3];
+	dma16	= ints[4];
+
+	sb_io	= ints[5];
+	sb_irq	= ints[6];
+	sb_dma	= ints[7];
+	sb_dma16 = ints[8];
+
+	return 1;
+}
+
+__setup("pas2=", setup_pas2);
+#endif