Initial import

10 files changed, 2565 insertions, 0 deletions

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
new file mode 100644
index 000000000..e7d08806f
--- /dev/null
+++ b/sound/soc/atmel/Kconfig
@@ -0,0 +1,57 @@
+config SND_ATMEL_SOC
+	tristate "SoC Audio for the Atmel System-on-Chip"
+	depends on HAS_IOMEM
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the ATMEL SSC interface. You will also need
+	  to select the audio interfaces to support below.
+
+config SND_ATMEL_SOC_PDC
+	tristate
+	depends on SND_ATMEL_SOC
+
+config SND_ATMEL_SOC_DMA
+	tristate
+	depends on SND_ATMEL_SOC
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+
+config SND_ATMEL_SOC_SSC
+	tristate
+	depends on SND_ATMEL_SOC
+	help
+	  Say Y or M if you want to add support for codecs the
+	  ATMEL SSC interface. You will also needs to select the individual
+	  machine drivers to support below.
+
+config SND_AT91_SOC_SAM9G20_WM8731
+	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	select SND_ATMEL_SOC_PDC
+	select SND_ATMEL_SOC_SSC
+	select SND_SOC_WM8731
+	help
+	  Say Y if you want to add support for SoC audio on WM8731-based
+	  AT91sam9g20 evaluation board.
+
+config SND_ATMEL_SOC_WM8904
+	tristate "Atmel ASoC driver for boards using WM8904 codec"
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on ATMEL_SSC && SND_ATMEL_SOC && I2C
+	select SND_ATMEL_SOC_SSC
+	select SND_ATMEL_SOC_DMA
+	select SND_SOC_WM8904
+	help
+	  Say Y if you want to add support for Atmel ASoC driver for boards using
+	  WM8904 codec.
+
+config SND_AT91_SOC_SAM9X5_WM8731
+	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
+	depends on ARCH_AT91 || COMPILE_TEST
+	depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+	select SND_ATMEL_SOC_SSC
+	select SND_ATMEL_SOC_DMA
+	select SND_SOC_WM8731
+	help
+	  Say Y if you want to add support for audio SoC on an
+	  at91sam9x5 based board that is using WM8731 codec.
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
new file mode 100644
index 000000000..b327e5cc8
--- /dev/null
+++ b/sound/soc/atmel/Makefile
@@ -0,0 +1,17 @@
+# AT91 Platform Support
+snd-soc-atmel-pcm-pdc-objs := atmel-pcm-pdc.o
+snd-soc-atmel-pcm-dma-objs := atmel-pcm-dma.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
+obj-$(CONFIG_SND_ATMEL_SOC_PDC) += snd-soc-atmel-pcm-pdc.o
+obj-$(CONFIG_SND_ATMEL_SOC_DMA) += snd-soc-atmel-pcm-dma.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
+# AT91 Machine Support
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+snd-atmel-soc-wm8904-objs := atmel_wm8904.o
+snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
+
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
+obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c
new file mode 100644
index 000000000..b6625c8c4
--- /dev/null
+++ b/sound/soc/atmel/atmel-pcm-dma.c
@@ -0,0 +1,140 @@
+/*
+ * atmel-pcm-dma.c  --  ALSA PCM DMA support for the Atmel SoC.
+ *
+ *  Copyright (C) 2012 Atmel
+ *
+ * Author: Bo Shen <voice.shen@atmel.com>
+ *
+ * Based on atmel-pcm by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * Copyright 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/atmel-ssc.h>
+#include <linux/platform_data/dma-atmel.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "atmel-pcm.h"
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+static const struct snd_pcm_hardware atmel_pcm_dma_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_RESUME |
+				  SNDRV_PCM_INFO_PAUSE,
+	.period_bytes_min	= 256,		/* lighting DMA overhead */
+	.period_bytes_max	= 2 * 0xffff,	/* if 2 bytes format */
+	.periods_min		= 8,
+	.periods_max		= 1024,		/* no limit */
+	.buffer_bytes_max	= 512 * 1024,
+};
+
+/**
+ * atmel_pcm_dma_irq: SSC interrupt handler for DMAENGINE enabled SSC
+ *
+ * We use DMAENGINE to send/receive data to/from SSC so this ISR is only to
+ * check if any overrun occured.
+ */
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+	struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct atmel_pcm_dma_params *prtd;
+
+	prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	if (ssc_sr & prtd->mask->ssc_error) {
+		if (snd_pcm_running(substream))
+			pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n",
+				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+				? "underrun" : "overrun", prtd->name,
+				ssc_sr);
+
+		/* stop RX and capture: will be enabled again at restart */
+		ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_disable);
+		snd_pcm_stop_xrun(substream);
+
+		/* now drain RHR and read status to remove xrun condition */
+		ssc_readx(prtd->ssc->regs, SSC_RHR);
+		ssc_readx(prtd->ssc->regs, SSC_SR);
+	}
+}
+
+static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct atmel_pcm_dma_params *prtd;
+	struct ssc_device *ssc;
+	int ret;
+
+	prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	ssc = prtd->ssc;
+
+	ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
+	if (ret) {
+		pr_err("atmel-pcm: hwparams to dma slave configure failed\n");
+		return ret;
+	}
+
+	slave_config->dst_addr = ssc->phybase + SSC_THR;
+	slave_config->dst_maxburst = 1;
+
+	slave_config->src_addr = ssc->phybase + SSC_RHR;
+	slave_config->src_maxburst = 1;
+
+	prtd->dma_intr_handler = atmel_pcm_dma_irq;
+
+	return 0;
+}
+
+static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = {
+	.prepare_slave_config = atmel_pcm_configure_dma,
+	.pcm_hardware = &atmel_pcm_dma_hardware,
+	.prealloc_buffer_size = 64 * 1024,
+};
+
+int atmel_pcm_dma_platform_register(struct device *dev)
+{
+	return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config,
+			SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
+}
+EXPORT_SYMBOL(atmel_pcm_dma_platform_register);
+
+void atmel_pcm_dma_platform_unregister(struct device *dev)
+{
+	snd_dmaengine_pcm_unregister(dev);
+}
+EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister);
+
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Atmel DMA based PCM module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/atmel-pcm-pdc.c b/sound/soc/atmel/atmel-pcm-pdc.c
new file mode 100644
index 000000000..da861b444
--- /dev/null
+++ b/sound/soc/atmel/atmel-pcm-pdc.c
@@ -0,0 +1,416 @@
+/*
+ * atmel-pcm.c  --  ALSA PCM interface for the Atmel atmel SoC.
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 30, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/atmel_pdc.h>
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "atmel-pcm.h"
+
+
+static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+	int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = ATMEL_SSC_DMABUF_SIZE;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_coherent(pcm->card->dev, size,
+			&buf->addr, GFP_KERNEL);
+	pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n",
+			(void *)buf->area, (void *)(long)buf->addr, size);
+
+	if (!buf->area)
+		return -ENOMEM;
+
+	buf->bytes = size;
+	return 0;
+}
+
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	return remap_pfn_range(vma, vma->vm_start,
+		       substream->dma_buffer.addr >> PAGE_SHIFT,
+		       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+static int atmel_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_card *card = rtd->card->snd_card;
+	struct snd_pcm *pcm = rtd->pcm;
+	int ret;
+
+	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+		pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n");
+		ret = atmel_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+		pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n");
+		ret = atmel_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+ out:
+	return ret;
+}
+
+static void atmel_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+		dma_free_coherent(pcm->card->dev, buf->bytes,
+				  buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+/* TODO: These values were taken from the AT91 platform driver, check
+ *	 them against real values for AT32
+ */
+static const struct snd_pcm_hardware atmel_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED |
+				  SNDRV_PCM_INFO_PAUSE,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= 8192,
+	.periods_min		= 2,
+	.periods_max		= 1024,
+	.buffer_bytes_max	= ATMEL_SSC_DMABUF_SIZE,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Data types
+\*--------------------------------------------------------------------------*/
+struct atmel_runtime_data {
+	struct atmel_pcm_dma_params *params;
+	dma_addr_t dma_buffer;		/* physical address of dma buffer */
+	dma_addr_t dma_buffer_end;	/* first address beyond DMA buffer */
+	size_t period_size;
+
+	dma_addr_t period_ptr;		/* physical address of next period */
+};
+
+/*--------------------------------------------------------------------------*\
+ * ISR
+\*--------------------------------------------------------------------------*/
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+	struct snd_pcm_substream *substream)
+{
+	struct atmel_runtime_data *prtd = substream->runtime->private_data;
+	struct atmel_pcm_dma_params *params = prtd->params;
+	static int count;
+
+	count++;
+
+	if (ssc_sr & params->mask->ssc_endbuf) {
+		pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
+				substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+				? "underrun" : "overrun",
+				params->name, ssc_sr, count);
+
+		/* re-start the PDC */
+		ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+			   params->mask->pdc_disable);
+		prtd->period_ptr += prtd->period_size;
+		if (prtd->period_ptr >= prtd->dma_buffer_end)
+			prtd->period_ptr = prtd->dma_buffer;
+
+		ssc_writex(params->ssc->regs, params->pdc->xpr,
+			   prtd->period_ptr);
+		ssc_writex(params->ssc->regs, params->pdc->xcr,
+			   prtd->period_size / params->pdc_xfer_size);
+		ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+			   params->mask->pdc_enable);
+	}
+
+	if (ssc_sr & params->mask->ssc_endx) {
+		/* Load the PDC next pointer and counter registers */
+		prtd->period_ptr += prtd->period_size;
+		if (prtd->period_ptr >= prtd->dma_buffer_end)
+			prtd->period_ptr = prtd->dma_buffer;
+
+		ssc_writex(params->ssc->regs, params->pdc->xnpr,
+			   prtd->period_ptr);
+		ssc_writex(params->ssc->regs, params->pdc->xncr,
+			   prtd->period_size / params->pdc_xfer_size);
+	}
+
+	snd_pcm_period_elapsed(substream);
+}
+
+
+/*--------------------------------------------------------------------------*\
+ * PCM operations
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct atmel_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+	/* this may get called several times by oss emulation
+	 * with different params */
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	prtd->params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
+
+	prtd->dma_buffer = runtime->dma_addr;
+	prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
+	prtd->period_size = params_period_bytes(params);
+
+	pr_debug("atmel-pcm: "
+		"hw_params: DMA for %s initialized "
+		"(dma_bytes=%zu, period_size=%zu)\n",
+		prtd->params->name,
+		runtime->dma_bytes,
+		prtd->period_size);
+	return 0;
+}
+
+static int atmel_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct atmel_runtime_data *prtd = substream->runtime->private_data;
+	struct atmel_pcm_dma_params *params = prtd->params;
+
+	if (params != NULL) {
+		ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+			   params->mask->pdc_disable);
+		prtd->params->dma_intr_handler = NULL;
+	}
+
+	return 0;
+}
+
+static int atmel_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct atmel_runtime_data *prtd = substream->runtime->private_data;
+	struct atmel_pcm_dma_params *params = prtd->params;
+
+	ssc_writex(params->ssc->regs, SSC_IDR,
+		   params->mask->ssc_endx | params->mask->ssc_endbuf);
+	ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+		   params->mask->pdc_disable);
+	return 0;
+}
+
+static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
+	int cmd)
+{
+	struct snd_pcm_runtime *rtd = substream->runtime;
+	struct atmel_runtime_data *prtd = rtd->private_data;
+	struct atmel_pcm_dma_params *params = prtd->params;
+	int ret = 0;
+
+	pr_debug("atmel-pcm:buffer_size = %ld,"
+		"dma_area = %p, dma_bytes = %zu\n",
+		rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		prtd->period_ptr = prtd->dma_buffer;
+
+		ssc_writex(params->ssc->regs, params->pdc->xpr,
+			   prtd->period_ptr);
+		ssc_writex(params->ssc->regs, params->pdc->xcr,
+			   prtd->period_size / params->pdc_xfer_size);
+
+		prtd->period_ptr += prtd->period_size;
+		ssc_writex(params->ssc->regs, params->pdc->xnpr,
+			   prtd->period_ptr);
+		ssc_writex(params->ssc->regs, params->pdc->xncr,
+			   prtd->period_size / params->pdc_xfer_size);
+
+		pr_debug("atmel-pcm: trigger: "
+			"period_ptr=%lx, xpr=%u, "
+			"xcr=%u, xnpr=%u, xncr=%u\n",
+			(unsigned long)prtd->period_ptr,
+			ssc_readx(params->ssc->regs, params->pdc->xpr),
+			ssc_readx(params->ssc->regs, params->pdc->xcr),
+			ssc_readx(params->ssc->regs, params->pdc->xnpr),
+			ssc_readx(params->ssc->regs, params->pdc->xncr));
+
+		ssc_writex(params->ssc->regs, SSC_IER,
+			   params->mask->ssc_endx | params->mask->ssc_endbuf);
+		ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+			   params->mask->pdc_enable);
+
+		pr_debug("sr=%u imr=%u\n",
+			ssc_readx(params->ssc->regs, SSC_SR),
+			ssc_readx(params->ssc->regs, SSC_IER));
+		break;		/* SNDRV_PCM_TRIGGER_START */
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+			   params->mask->pdc_disable);
+		break;
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+			   params->mask->pdc_enable);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static snd_pcm_uframes_t atmel_pcm_pointer(
+	struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct atmel_runtime_data *prtd = runtime->private_data;
+	struct atmel_pcm_dma_params *params = prtd->params;
+	dma_addr_t ptr;
+	snd_pcm_uframes_t x;
+
+	ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr);
+	x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
+
+	if (x == runtime->buffer_size)
+		x = 0;
+
+	return x;
+}
+
+static int atmel_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct atmel_runtime_data *prtd;
+	int ret = 0;
+
+	snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware);
+
+	/* ensure that buffer size is a multiple of period size */
+	ret = snd_pcm_hw_constraint_integer(runtime,
+						SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		goto out;
+
+	prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL);
+	if (prtd == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	runtime->private_data = prtd;
+
+ out:
+	return ret;
+}
+
+static int atmel_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct atmel_runtime_data *prtd = substream->runtime->private_data;
+
+	kfree(prtd);
+	return 0;
+}
+
+static struct snd_pcm_ops atmel_pcm_ops = {
+	.open		= atmel_pcm_open,
+	.close		= atmel_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= atmel_pcm_hw_params,
+	.hw_free	= atmel_pcm_hw_free,
+	.prepare	= atmel_pcm_prepare,
+	.trigger	= atmel_pcm_trigger,
+	.pointer	= atmel_pcm_pointer,
+	.mmap		= atmel_pcm_mmap,
+};
+
+static struct snd_soc_platform_driver atmel_soc_platform = {
+	.ops		= &atmel_pcm_ops,
+	.pcm_new	= atmel_pcm_new,
+	.pcm_free	= atmel_pcm_free,
+};
+
+int atmel_pcm_pdc_platform_register(struct device *dev)
+{
+	return snd_soc_register_platform(dev, &atmel_soc_platform);
+}
+EXPORT_SYMBOL(atmel_pcm_pdc_platform_register);
+
+void atmel_pcm_pdc_platform_unregister(struct device *dev)
+{
+	snd_soc_unregister_platform(dev);
+}
+EXPORT_SYMBOL(atmel_pcm_pdc_platform_unregister);
+
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("Atmel PCM module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h
new file mode 100644
index 000000000..6eaf081ca
--- /dev/null
+++ b/sound/soc/atmel/atmel-pcm.h
@@ -0,0 +1,114 @@
+/*
+ * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC.
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 30, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ATMEL_PCM_H
+#define _ATMEL_PCM_H
+
+#include <linux/atmel-ssc.h>
+
+#define ATMEL_SSC_DMABUF_SIZE	(64 * 1024)
+
+/*
+ * Registers and status bits that are required by the PCM driver.
+ */
+struct atmel_pdc_regs {
+	unsigned int	xpr;		/* PDC recv/trans pointer */
+	unsigned int	xcr;		/* PDC recv/trans counter */
+	unsigned int	xnpr;		/* PDC next recv/trans pointer */
+	unsigned int	xncr;		/* PDC next recv/trans counter */
+	unsigned int	ptcr;		/* PDC transfer control */
+};
+
+struct atmel_ssc_mask {
+	u32	ssc_enable;		/* SSC recv/trans enable */
+	u32	ssc_disable;		/* SSC recv/trans disable */
+	u32	ssc_error;		/* SSC error conditions */
+	u32	ssc_endx;		/* SSC ENDTX or ENDRX */
+	u32	ssc_endbuf;		/* SSC TXBUFE or RXBUFF */
+	u32	pdc_enable;		/* PDC recv/trans enable */
+	u32	pdc_disable;		/* PDC recv/trans disable */
+};
+
+/*
+ * This structure, shared between the PCM driver and the interface,
+ * contains all information required by the PCM driver to perform the
+ * PDC DMA operation.  All fields except dma_intr_handler() are initialized
+ * by the interface.  The dma_intr_handler() pointer is set by the PCM
+ * driver and called by the interface SSC interrupt handler if it is
+ * non-NULL.
+ */
+struct atmel_pcm_dma_params {
+	char *name;			/* stream identifier */
+	int pdc_xfer_size;		/* PDC counter increment in bytes */
+	struct ssc_device *ssc;		/* SSC device for stream */
+	struct atmel_pdc_regs *pdc;	/* PDC receive or transmit registers */
+	struct atmel_ssc_mask *mask;	/* SSC & PDC status bits */
+	struct snd_pcm_substream *substream;
+	void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
+};
+
+/*
+ * SSC register access (since ssc_writel() / ssc_readl() require literal name)
+ */
+#define ssc_readx(base, reg)            (__raw_readl((base) + (reg)))
+#define ssc_writex(base, reg, value)    __raw_writel((value), (base) + (reg))
+
+#if defined(CONFIG_SND_ATMEL_SOC_PDC) || \
+	defined(CONFIG_SND_ATMEL_SOC_PDC_MODULE)
+int atmel_pcm_pdc_platform_register(struct device *dev);
+void atmel_pcm_pdc_platform_unregister(struct device *dev);
+#else
+static inline int atmel_pcm_pdc_platform_register(struct device *dev)
+{
+	return 0;
+}
+static inline void atmel_pcm_pdc_platform_unregister(struct device *dev)
+{
+}
+#endif
+
+#if defined(CONFIG_SND_ATMEL_SOC_DMA) || \
+	defined(CONFIG_SND_ATMEL_SOC_DMA_MODULE)
+int atmel_pcm_dma_platform_register(struct device *dev);
+void atmel_pcm_dma_platform_unregister(struct device *dev);
+#else
+static inline int atmel_pcm_dma_platform_register(struct device *dev)
+{
+	return 0;
+}
+static inline void atmel_pcm_dma_platform_unregister(struct device *dev)
+{
+}
+#endif
+
+#endif /* _ATMEL_PCM_H */
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
new file mode 100644
index 000000000..841d05946
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -0,0 +1,1004 @@
+/*
+ * atmel_ssc_dai.c  --  ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *         ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#define NUM_SSC_DEVICES		3
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+	.xpr		= ATMEL_PDC_TPR,
+	.xcr		= ATMEL_PDC_TCR,
+	.xnpr		= ATMEL_PDC_TNPR,
+	.xncr		= ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+	.xpr		= ATMEL_PDC_RPR,
+	.xcr		= ATMEL_PDC_RCR,
+	.xnpr		= ATMEL_PDC_RNPR,
+	.xncr		= ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+	.ssc_enable	= SSC_BIT(CR_TXEN),
+	.ssc_disable	= SSC_BIT(CR_TXDIS),
+	.ssc_endx	= SSC_BIT(SR_ENDTX),
+	.ssc_endbuf	= SSC_BIT(SR_TXBUFE),
+	.ssc_error	= SSC_BIT(SR_OVRUN),
+	.pdc_enable	= ATMEL_PDC_TXTEN,
+	.pdc_disable	= ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+	.ssc_enable	= SSC_BIT(CR_RXEN),
+	.ssc_disable	= SSC_BIT(CR_RXDIS),
+	.ssc_endx	= SSC_BIT(SR_ENDRX),
+	.ssc_endbuf	= SSC_BIT(SR_RXBUFF),
+	.ssc_error	= SSC_BIT(SR_OVRUN),
+	.pdc_enable	= ATMEL_PDC_RXTEN,
+	.pdc_disable	= ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+	{{
+	.name		= "SSC0 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC0 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+	{{
+	.name		= "SSC1 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC1 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+	{{
+	.name		= "SSC2 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC2 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+	{
+	.name		= "ssc0",
+	.lock		= __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+	{
+	.name		= "ssc1",
+	.lock		= __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+	{
+	.name		= "ssc2",
+	.lock		= __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+};
+
+
+/*
+ * SSC interrupt handler.  Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+	struct atmel_ssc_info *ssc_p = dev_id;
+	struct atmel_pcm_dma_params *dma_params;
+	u32 ssc_sr;
+	u32 ssc_substream_mask;
+	int i;
+
+	ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+			& (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+	/*
+	 * Loop through the substreams attached to this SSC.  If
+	 * a DMA-related interrupt occurred on that substream, call
+	 * the DMA interrupt handler function, if one has been
+	 * registered in the dma_params structure by the PCM driver.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+		dma_params = ssc_p->dma_params[i];
+
+		if ((dma_params != NULL) &&
+			(dma_params->dma_intr_handler != NULL)) {
+			ssc_substream_mask = (dma_params->mask->ssc_endx |
+					dma_params->mask->ssc_endbuf);
+			if (ssc_sr & ssc_substream_mask) {
+				dma_params->dma_intr_handler(ssc_sr,
+						dma_params->
+						substream);
+			}
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * When the bit clock is input, limit the maximum rate according to the
+ * Serial Clock Ratio Considerations section from the SSC documentation:
+ *
+ *   The Transmitter and the Receiver can be programmed to operate
+ *   with the clock signals provided on either the TK or RK pins.
+ *   This allows the SSC to support many slave-mode data transfers.
+ *   In this case, the maximum clock speed allowed on the RK pin is:
+ *   - Peripheral clock divided by 2 if Receiver Frame Synchro is input
+ *   - Peripheral clock divided by 3 if Receiver Frame Synchro is output
+ *   In addition, the maximum clock speed allowed on the TK pin is:
+ *   - Peripheral clock divided by 6 if Transmit Frame Synchro is input
+ *   - Peripheral clock divided by 2 if Transmit Frame Synchro is output
+ *
+ * When the bit clock is output, limit the rate according to the
+ * SSC divider restrictions.
+ */
+static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params,
+				  struct snd_pcm_hw_rule *rule)
+{
+	struct atmel_ssc_info *ssc_p = rule->private;
+	struct ssc_device *ssc = ssc_p->ssc;
+	struct snd_interval *i = hw_param_interval(params, rule->var);
+	struct snd_interval t;
+	struct snd_ratnum r = {
+		.den_min = 1,
+		.den_max = 4095,
+		.den_step = 1,
+	};
+	unsigned int num = 0, den = 0;
+	int frame_size;
+	int mck_div = 2;
+	int ret;
+
+	frame_size = snd_soc_params_to_frame_size(params);
+	if (frame_size < 0)
+		return frame_size;
+
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFS:
+		if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE)
+		    && ssc->clk_from_rk_pin)
+			/* Receiver Frame Synchro (i.e. capture)
+			 * is output (format is _CFS) and the RK pin
+			 * is used for input (format is _CBM_).
+			 */
+			mck_div = 3;
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK)
+		    && !ssc->clk_from_rk_pin)
+			/* Transmit Frame Synchro (i.e. playback)
+			 * is input (format is _CFM) and the TK pin
+			 * is used for input (format _CBM_ but not
+			 * using the RK pin).
+			 */
+			mck_div = 6;
+		break;
+	}
+
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		r.num = ssc_p->mck_rate / mck_div / frame_size;
+
+		ret = snd_interval_ratnum(i, 1, &r, &num, &den);
+		if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) {
+			params->rate_num = num;
+			params->rate_den = den;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFS:
+	case SND_SOC_DAIFMT_CBM_CFM:
+		t.min = 8000;
+		t.max = ssc_p->mck_rate / mck_div / frame_size;
+		t.openmin = t.openmax = 0;
+		t.integer = 0;
+		ret = snd_interval_refine(i, &t);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup.  Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, dir_mask;
+	int ret;
+
+	pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+		ssc_readl(ssc_p->ssc->regs, SR));
+
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	clk_enable(ssc_p->ssc->clk);
+	ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
+
+	/* Reset the SSC to keep it at a clean status */
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		dir = 0;
+		dir_mask = SSC_DIR_MASK_PLAYBACK;
+	} else {
+		dir = 1;
+		dir_mask = SSC_DIR_MASK_CAPTURE;
+	}
+
+	ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+				  SNDRV_PCM_HW_PARAM_RATE,
+				  atmel_ssc_hw_rule_rate,
+				  ssc_p,
+				  SNDRV_PCM_HW_PARAM_FRAME_BITS,
+				  SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+	if (ret < 0) {
+		dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret);
+		return ret;
+	}
+
+	dma_params = &ssc_dma_params[dai->id][dir];
+	dma_params->ssc = ssc_p->ssc;
+	dma_params->substream = substream;
+
+	ssc_p->dma_params[dir] = dma_params;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_params);
+
+	spin_lock_irq(&ssc_p->lock);
+	if (ssc_p->dir_mask & dir_mask) {
+		spin_unlock_irq(&ssc_p->lock);
+		return -EBUSY;
+	}
+	ssc_p->dir_mask |= dir_mask;
+	spin_unlock_irq(&ssc_p->lock);
+
+	return 0;
+}
+
+/*
+ * Shutdown.  Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, dir_mask;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	if (dma_params != NULL) {
+		dma_params->ssc = NULL;
+		dma_params->substream = NULL;
+		ssc_p->dma_params[dir] = NULL;
+	}
+
+	dir_mask = 1 << dir;
+
+	spin_lock_irq(&ssc_p->lock);
+	ssc_p->dir_mask &= ~dir_mask;
+	if (!ssc_p->dir_mask) {
+		if (ssc_p->initialized) {
+			free_irq(ssc_p->ssc->irq, ssc_p);
+			ssc_p->initialized = 0;
+		}
+
+		/* Reset the SSC */
+		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+		/* Clear the SSC dividers */
+		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+	}
+	spin_unlock_irq(&ssc_p->lock);
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+	ssc_p->daifmt = fmt;
+	return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+	switch (div_id) {
+	case ATMEL_SSC_CMR_DIV:
+		/*
+		 * The same master clock divider is used for both
+		 * transmit and receive, so if a value has already
+		 * been set, it must match this value.
+		 */
+		if (ssc_p->dir_mask !=
+			(SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE))
+			ssc_p->cmr_div = div;
+		else if (ssc_p->cmr_div == 0)
+			ssc_p->cmr_div = div;
+		else
+			if (div != ssc_p->cmr_div)
+				return -EBUSY;
+		break;
+
+	case ATMEL_SSC_TCMR_PERIOD:
+		ssc_p->tcmr_period = div;
+		break;
+
+	case ATMEL_SSC_RCMR_PERIOD:
+		ssc_p->rcmr_period = div;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params,
+	struct snd_soc_dai *dai)
+{
+	int id = dai->id;
+	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, channels, bits;
+	u32 tfmr, rfmr, tcmr, rcmr;
+	int ret;
+	int fslen, fslen_ext;
+
+	/*
+	 * Currently, there is only one set of dma params for
+	 * each direction.  If more are added, this code will
+	 * have to be changed to select the proper set.
+	 */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	channels = params_channels(params);
+
+	/*
+	 * Determine sample size in bits and the PDC increment.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		bits = 8;
+		dma_params->pdc_xfer_size = 1;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bits = 16;
+		dma_params->pdc_xfer_size = 2;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		bits = 24;
+		dma_params->pdc_xfer_size = 4;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		bits = 32;
+		dma_params->pdc_xfer_size = 4;
+		break;
+	default:
+		printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+		return -EINVAL;
+	}
+
+	/*
+	 * Compute SSC register settings.
+	 */
+	switch (ssc_p->daifmt
+		& (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+		/*
+		 * I2S format, SSC provides BCLK and LRC clocks.
+		 *
+		 * The SSC transmit and receive clocks are generated
+		 * from the MCK divider, and the BCLK signal
+		 * is output on the SSC TK line.
+		 */
+
+		if (bits > 16 && !ssc->pdata->has_fslen_ext) {
+			dev_err(dai->dev,
+				"sample size %d is too large for SSC device\n",
+				bits);
+			return -EINVAL;
+		}
+
+		fslen_ext = (bits - 1) / 16;
+		fslen = (bits - 1) % 16;
+
+		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+			| SSC_BF(RCMR_STTDLY, START_DELAY)
+			| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+		rfmr =    SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
+			| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+			| SSC_BF(RFMR_FSLEN, fslen)
+			| SSC_BF(RFMR_DATNB, (channels - 1))
+			| SSC_BIT(RFMR_MSBF)
+			| SSC_BF(RFMR_LOOP, 0)
+			| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+			| SSC_BF(TCMR_STTDLY, START_DELAY)
+			| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+		tfmr =    SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
+			| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(TFMR_FSDEN, 0)
+			| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+			| SSC_BF(TFMR_FSLEN, fslen)
+			| SSC_BF(TFMR_DATNB, (channels - 1))
+			| SSC_BIT(TFMR_MSBF)
+			| SSC_BF(TFMR_DATDEF, 0)
+			| SSC_BF(TFMR_DATLEN, (bits - 1));
+		break;
+
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+		/* I2S format, CODEC supplies BCLK and LRC clocks. */
+		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
+			| SSC_BF(RCMR_STTDLY, START_DELAY)
+			| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+			| SSC_BF(RFMR_FSLEN, 0)
+			| SSC_BF(RFMR_DATNB, (channels - 1))
+			| SSC_BIT(RFMR_MSBF)
+			| SSC_BF(RFMR_LOOP, 0)
+			| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+		tcmr =	  SSC_BF(TCMR_PERIOD, 0)
+			| SSC_BF(TCMR_STTDLY, START_DELAY)
+			| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(TFMR_FSDEN, 0)
+			| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+			| SSC_BF(TFMR_FSLEN, 0)
+			| SSC_BF(TFMR_DATNB, (channels - 1))
+			| SSC_BIT(TFMR_MSBF)
+			| SSC_BF(TFMR_DATDEF, 0)
+			| SSC_BF(TFMR_DATLEN, (bits - 1));
+		break;
+
+	case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFS:
+		/* I2S format, CODEC supplies BCLK, SSC supplies LRCLK. */
+		if (bits > 16 && !ssc->pdata->has_fslen_ext) {
+			dev_err(dai->dev,
+				"sample size %d is too large for SSC device\n",
+				bits);
+			return -EINVAL;
+		}
+
+		fslen_ext = (bits - 1) / 16;
+		fslen = (bits - 1) % 16;
+
+		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+			| SSC_BF(RCMR_STTDLY, START_DELAY)
+			| SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+		rfmr =    SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
+			| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+			| SSC_BF(RFMR_FSLEN, fslen)
+			| SSC_BF(RFMR_DATNB, (channels - 1))
+			| SSC_BIT(RFMR_MSBF)
+			| SSC_BF(RFMR_LOOP, 0)
+			| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+			| SSC_BF(TCMR_STTDLY, START_DELAY)
+			| SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+		tfmr =    SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
+			| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_NEGATIVE)
+			| SSC_BF(TFMR_FSDEN, 0)
+			| SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+			| SSC_BF(TFMR_FSLEN, fslen)
+			| SSC_BF(TFMR_DATNB, (channels - 1))
+			| SSC_BIT(TFMR_MSBF)
+			| SSC_BF(TFMR_DATDEF, 0)
+			| SSC_BF(TFMR_DATLEN, (bits - 1));
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+		/*
+		 * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+		 *
+		 * The SSC transmit and receive clocks are generated from the
+		 * MCK divider, and the BCLK signal is output
+		 * on the SSC TK line.
+		 */
+		rcmr =	  SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+			| SSC_BF(RCMR_STTDLY, 1)
+			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+			| SSC_BF(RFMR_FSLEN, 0)
+			| SSC_BF(RFMR_DATNB, (channels - 1))
+			| SSC_BIT(RFMR_MSBF)
+			| SSC_BF(RFMR_LOOP, 0)
+			| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+		tcmr =	  SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+			| SSC_BF(TCMR_STTDLY, 1)
+			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+			| SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(TFMR_FSDEN, 0)
+			| SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+			| SSC_BF(TFMR_FSLEN, 0)
+			| SSC_BF(TFMR_DATNB, (channels - 1))
+			| SSC_BIT(TFMR_MSBF)
+			| SSC_BF(TFMR_DATDEF, 0)
+			| SSC_BF(TFMR_DATLEN, (bits - 1));
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+		/*
+		 * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
+		 *
+		 * Data is transferred on first BCLK after LRC pulse rising
+		 * edge.If stereo, the right channel data is contiguous with
+		 * the left channel data.
+		 */
+		rcmr =	  SSC_BF(RCMR_PERIOD, 0)
+			| SSC_BF(RCMR_STTDLY, START_DELAY)
+			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
+			| SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+			| SSC_BF(RFMR_FSLEN, 0)
+			| SSC_BF(RFMR_DATNB, (channels - 1))
+			| SSC_BIT(RFMR_MSBF)
+			| SSC_BF(RFMR_LOOP, 0)
+			| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+		tcmr =	  SSC_BF(TCMR_PERIOD, 0)
+			| SSC_BF(TCMR_STTDLY, START_DELAY)
+			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
+			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+			| SSC_BF(TFMR_FSDEN, 0)
+			| SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+			| SSC_BF(TFMR_FSLEN, 0)
+			| SSC_BF(TFMR_DATNB, (channels - 1))
+			| SSC_BIT(TFMR_MSBF)
+			| SSC_BF(TFMR_DATDEF, 0)
+			| SSC_BF(TFMR_DATLEN, (bits - 1));
+		break;
+
+	default:
+		printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+			ssc_p->daifmt);
+		return -EINVAL;
+	}
+	pr_debug("atmel_ssc_hw_params: "
+			"RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+			rcmr, rfmr, tcmr, tfmr);
+
+	if (!ssc_p->initialized) {
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
+
+		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+				ssc_p->name, ssc_p);
+		if (ret < 0) {
+			printk(KERN_WARNING
+					"atmel_ssc_dai: request_irq failure\n");
+			pr_debug("Atmel_ssc_dai: Stoping clock\n");
+			clk_disable(ssc_p->ssc->clk);
+			return ret;
+		}
+
+		ssc_p->initialized = 1;
+	}
+
+	/* set SSC clock mode register */
+	ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+	/* set receive clock mode and format */
+	ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+	ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+	/* set transmit clock mode and format */
+	ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+	ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+	pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+	return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+	ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
+
+	pr_debug("%s enabled SSC_SR=0x%08x\n",
+			dir ? "receive" : "transmit",
+			ssc_readl(ssc_p->ssc->regs, SR));
+	return 0;
+}
+
+static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
+			     int cmd, struct snd_soc_dai *dai)
+{
+	struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+		break;
+	default:
+		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
+{
+	struct atmel_ssc_info *ssc_p;
+
+	if (!cpu_dai->active)
+		return 0;
+
+	ssc_p = &ssc_info[cpu_dai->id];
+
+	/* Save the status register before disabling transmit and receive */
+	ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+	/* Save the current interrupt mask, then disable unmasked interrupts */
+	ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+	ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+	ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+	ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+	ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+	ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+	ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+	return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
+{
+	struct atmel_ssc_info *ssc_p;
+	u32 cr;
+
+	if (!cpu_dai->active)
+		return 0;
+
+	ssc_p = &ssc_info[cpu_dai->id];
+
+	/* restore SSC register settings */
+	ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+	ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+	ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+	ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+	ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+	/* re-enable interrupts */
+	ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+	/* Re-enable receive and transmit as appropriate */
+	cr = 0;
+	cr |=
+	    (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+	cr |=
+	    (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+	ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+	return 0;
+}
+#else /* CONFIG_PM */
+#  define atmel_ssc_suspend	NULL
+#  define atmel_ssc_resume	NULL
+#endif /* CONFIG_PM */
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_LE |\
+			  SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops atmel_ssc_dai_ops = {
+	.startup	= atmel_ssc_startup,
+	.shutdown	= atmel_ssc_shutdown,
+	.prepare	= atmel_ssc_prepare,
+	.trigger	= atmel_ssc_trigger,
+	.hw_params	= atmel_ssc_hw_params,
+	.set_fmt	= atmel_ssc_set_dai_fmt,
+	.set_clkdiv	= atmel_ssc_set_dai_clkdiv,
+};
+
+static struct snd_soc_dai_driver atmel_ssc_dai = {
+		.suspend = atmel_ssc_suspend,
+		.resume = atmel_ssc_resume,
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min = 8000,
+			.rate_max = 384000,
+			.formats = ATMEL_SSC_FORMATS,},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min = 8000,
+			.rate_max = 384000,
+			.formats = ATMEL_SSC_FORMATS,},
+		.ops = &atmel_ssc_dai_ops,
+};
+
+static const struct snd_soc_component_driver atmel_ssc_component = {
+	.name		= "atmel-ssc",
+};
+
+static int asoc_ssc_init(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ssc_device *ssc = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = snd_soc_register_component(dev, &atmel_ssc_component,
+					 &atmel_ssc_dai, 1);
+	if (ret) {
+		dev_err(dev, "Could not register DAI: %d\n", ret);
+		goto err;
+	}
+
+	if (ssc->pdata->use_dma)
+		ret = atmel_pcm_dma_platform_register(dev);
+	else
+		ret = atmel_pcm_pdc_platform_register(dev);
+
+	if (ret) {
+		dev_err(dev, "Could not register PCM: %d\n", ret);
+		goto err_unregister_dai;
+	}
+
+	return 0;
+
+err_unregister_dai:
+	snd_soc_unregister_component(dev);
+err:
+	return ret;
+}
+
+static void asoc_ssc_exit(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ssc_device *ssc = platform_get_drvdata(pdev);
+
+	if (ssc->pdata->use_dma)
+		atmel_pcm_dma_platform_unregister(dev);
+	else
+		atmel_pcm_pdc_platform_unregister(dev);
+
+	snd_soc_unregister_component(dev);
+}
+
+/**
+ * atmel_ssc_set_audio - Allocate the specified SSC for audio use.
+ */
+int atmel_ssc_set_audio(int ssc_id)
+{
+	struct ssc_device *ssc;
+	int ret;
+
+	/* If we can grab the SSC briefly to parent the DAI device off it */
+	ssc = ssc_request(ssc_id);
+	if (IS_ERR(ssc)) {
+		pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
+			PTR_ERR(ssc));
+		return PTR_ERR(ssc);
+	} else {
+		ssc_info[ssc_id].ssc = ssc;
+	}
+
+	ret = asoc_ssc_init(&ssc->pdev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
+
+void atmel_ssc_put_audio(int ssc_id)
+{
+	struct ssc_device *ssc = ssc_info[ssc_id].ssc;
+
+	asoc_ssc_exit(&ssc->pdev->dev);
+	ssc_free(ssc);
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_put_audio);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h
new file mode 100644
index 000000000..80b153857
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.h
@@ -0,0 +1,124 @@
+/*
+ * atmel_ssc_dai.h - ALSA SSC interface for the Atmel  SoC
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *         ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ATMEL_SSC_DAI_H
+#define _ATMEL_SSC_DAI_H
+
+#include <linux/types.h>
+#include <linux/atmel-ssc.h>
+
+#include "atmel-pcm.h"
+
+/* SSC system clock ids */
+#define ATMEL_SYSCLK_MCK	0 /* SSC uses AT91 MCK as system clock */
+
+/* SSC divider ids */
+#define ATMEL_SSC_CMR_DIV	0 /* MCK divider for BCLK */
+#define ATMEL_SSC_TCMR_PERIOD	1 /* BCLK divider for transmit FS */
+#define ATMEL_SSC_RCMR_PERIOD	2 /* BCLK divider for receive FS */
+/*
+ * SSC direction masks
+ */
+#define SSC_DIR_MASK_UNUSED	0
+#define SSC_DIR_MASK_PLAYBACK	1
+#define SSC_DIR_MASK_CAPTURE	2
+
+/*
+ * SSC register values that Atmel left out of <linux/atmel-ssc.h>.  These
+ * are expected to be used with SSC_BF
+ */
+/* START bit field values */
+#define SSC_START_CONTINUOUS	0
+#define SSC_START_TX_RX		1
+#define SSC_START_LOW_RF	2
+#define SSC_START_HIGH_RF	3
+#define SSC_START_FALLING_RF	4
+#define SSC_START_RISING_RF	5
+#define SSC_START_LEVEL_RF	6
+#define SSC_START_EDGE_RF	7
+#define SSS_START_COMPARE_0	8
+
+/* CKI bit field values */
+#define SSC_CKI_FALLING		0
+#define SSC_CKI_RISING		1
+
+/* CKO bit field values */
+#define SSC_CKO_NONE		0
+#define SSC_CKO_CONTINUOUS	1
+#define SSC_CKO_TRANSFER	2
+
+/* CKS bit field values */
+#define SSC_CKS_DIV		0
+#define SSC_CKS_CLOCK		1
+#define SSC_CKS_PIN		2
+
+/* FSEDGE bit field values */
+#define SSC_FSEDGE_POSITIVE	0
+#define SSC_FSEDGE_NEGATIVE	1
+
+/* FSOS bit field values */
+#define SSC_FSOS_NONE		0
+#define SSC_FSOS_NEGATIVE	1
+#define SSC_FSOS_POSITIVE	2
+#define SSC_FSOS_LOW		3
+#define SSC_FSOS_HIGH		4
+#define SSC_FSOS_TOGGLE		5
+
+#define START_DELAY		1
+
+struct atmel_ssc_state {
+	u32 ssc_cmr;
+	u32 ssc_rcmr;
+	u32 ssc_rfmr;
+	u32 ssc_tcmr;
+	u32 ssc_tfmr;
+	u32 ssc_sr;
+	u32 ssc_imr;
+};
+
+
+struct atmel_ssc_info {
+	char *name;
+	struct ssc_device *ssc;
+	spinlock_t lock;	/* lock for dir_mask */
+	unsigned short dir_mask;	/* 0=unused, 1=playback, 2=capture */
+	unsigned short initialized;	/* true if SSC has been initialized */
+	unsigned short daifmt;
+	unsigned short cmr_div;
+	unsigned short tcmr_period;
+	unsigned short rcmr_period;
+	struct atmel_pcm_dma_params *dma_params[2];
+	struct atmel_ssc_state ssc_state;
+	unsigned long mck_rate;
+};
+
+int atmel_ssc_set_audio(int ssc_id);
+void atmel_ssc_put_audio(int ssc_id);
+
+#endif /* _AT91_SSC_DAI_H */
diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c
new file mode 100644
index 000000000..aa354e1c6
--- /dev/null
+++ b/sound/soc/atmel/atmel_wm8904.c
@@ -0,0 +1,195 @@
+/*
+ * atmel_wm8904 - Atmel ASoC driver for boards with WM8904 codec.
+ *
+ * Copyright (C) 2012 Atmel
+ *
+ * Author: Bo Shen <voice.shen@atmel.com>
+ *
+ * GPLv2 or later
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <sound/soc.h>
+
+#include "../codecs/wm8904.h"
+#include "atmel_ssc_dai.h"
+
+static const struct snd_soc_dapm_widget atmel_asoc_wm8904_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic", NULL),
+	SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK,
+		32768, params_rate(params) * 256);
+	if (ret < 0) {
+		pr_err("%s - failed to set wm8904 codec PLL.", __func__);
+		return ret;
+	}
+
+	/*
+	 * As here wm8904 use FLL output as its system clock
+	 * so calling set_sysclk won't care freq parameter
+	 * then we pass 0
+	 */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8904_CLK_FLL,
+			0, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		pr_err("%s -failed to set wm8904 SYSCLK\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops atmel_asoc_wm8904_ops = {
+	.hw_params = atmel_asoc_wm8904_hw_params,
+};
+
+static struct snd_soc_dai_link atmel_asoc_wm8904_dailink = {
+	.name = "WM8904",
+	.stream_name = "WM8904 PCM",
+	.codec_dai_name = "wm8904-hifi",
+	.dai_fmt = SND_SOC_DAIFMT_I2S
+		| SND_SOC_DAIFMT_NB_NF
+		| SND_SOC_DAIFMT_CBM_CFM,
+	.ops = &atmel_asoc_wm8904_ops,
+};
+
+static struct snd_soc_card atmel_asoc_wm8904_card = {
+	.name = "atmel_asoc_wm8904",
+	.owner = THIS_MODULE,
+	.dai_link = &atmel_asoc_wm8904_dailink,
+	.num_links = 1,
+	.dapm_widgets = atmel_asoc_wm8904_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(atmel_asoc_wm8904_dapm_widgets),
+	.fully_routed = true,
+};
+
+static int atmel_asoc_wm8904_dt_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	struct snd_soc_card *card = &atmel_asoc_wm8904_card;
+	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "only device tree supported\n");
+		return -EINVAL;
+	}
+
+	ret = snd_soc_of_parse_card_name(card, "atmel,model");
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse card name\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse audio routing\n");
+		return ret;
+	}
+
+	cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "failed to get dai and pcm info\n");
+		ret = -EINVAL;
+		return ret;
+	}
+	dailink->cpu_of_node = cpu_np;
+	dailink->platform_of_node = cpu_np;
+	of_node_put(cpu_np);
+
+	codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "failed to get codec info\n");
+		ret = -EINVAL;
+		return ret;
+	}
+	dailink->codec_of_node = codec_np;
+	of_node_put(codec_np);
+
+	return 0;
+}
+
+static int atmel_asoc_wm8904_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &atmel_asoc_wm8904_card;
+	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+	int id, ret;
+
+	card->dev = &pdev->dev;
+	ret = atmel_asoc_wm8904_dt_init(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to init dt info\n");
+		return ret;
+	}
+
+	id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc");
+	ret = atmel_ssc_set_audio(id);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to set SSC %d for audio\n", id);
+		return ret;
+	}
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card failed\n");
+		goto err_set_audio;
+	}
+
+	return 0;
+
+err_set_audio:
+	atmel_ssc_put_audio(id);
+	return ret;
+}
+
+static int atmel_asoc_wm8904_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+	int id;
+
+	id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc");
+
+	snd_soc_unregister_card(card);
+	atmel_ssc_put_audio(id);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = {
+	{ .compatible = "atmel,asoc-wm8904", },
+	{ }
+};
+#endif
+
+static struct platform_driver atmel_asoc_wm8904_driver = {
+	.driver = {
+		.name = "atmel-wm8904-audio",
+		.of_match_table = of_match_ptr(atmel_asoc_wm8904_dt_ids),
+	},
+	.probe = atmel_asoc_wm8904_probe,
+	.remove = atmel_asoc_wm8904_remove,
+};
+
+module_platform_driver(atmel_asoc_wm8904_driver);
+
+/* Module information */
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for Atmel EK with WM8904 codec");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
new file mode 100644
index 000000000..8de836165
--- /dev/null
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -0,0 +1,291 @@
+/*
+ * sam9g20_wm8731  --  SoC audio for AT91SAM9G20-based
+ * 			ATMEL AT91SAM9G20ek board.
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define MCLK_RATE 12000000
+
+/*
+ * As shipped the board does not have inputs.  However, it is relatively
+ * straightforward to modify the board to hook them up so support is left
+ * in the driver.
+ */
+#undef ENABLE_MIC_INPUT
+
+static struct clk *mclk;
+
+static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
+					struct snd_soc_dapm_context *dapm,
+					enum snd_soc_bias_level level)
+{
+	static int mclk_on;
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+		if (!mclk_on)
+			ret = clk_enable(mclk);
+		if (ret == 0)
+			mclk_on = 1;
+		break;
+
+	case SND_SOC_BIAS_OFF:
+	case SND_SOC_BIAS_STANDBY:
+		if (mclk_on)
+			clk_disable(mclk);
+		mclk_on = 0;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+	SND_SOC_DAPM_MIC("Int Mic", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+	/* speaker connected to LHPOUT */
+	{"Ext Spk", NULL, "LHPOUT"},
+
+	/* mic is connected to Mic Jack, with WM8731 Mic Bias */
+	{"MICIN", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	int ret;
+
+	printk(KERN_DEBUG
+			"at91sam9g20ek_wm8731 "
+			": at91sam9g20ek_wm8731_init() called\n");
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_MCLK,
+		MCLK_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	/* not connected */
+	snd_soc_dapm_nc_pin(dapm, "RLINEIN");
+	snd_soc_dapm_nc_pin(dapm, "LLINEIN");
+
+#ifndef ENABLE_MIC_INPUT
+	snd_soc_dapm_nc_pin(&rtd->card->dapm, "Int Mic");
+#endif
+
+	return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+	.name = "WM8731",
+	.stream_name = "WM8731 PCM",
+	.cpu_dai_name = "at91rm9200_ssc.0",
+	.codec_dai_name = "wm8731-hifi",
+	.init = at91sam9g20ek_wm8731_init,
+	.platform_name = "at91rm9200_ssc.0",
+	.codec_name = "wm8731.0-001b",
+	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		   SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct snd_soc_card snd_soc_at91sam9g20ek = {
+	.name = "AT91SAMG20-EK",
+	.owner = THIS_MODULE,
+	.dai_link = &at91sam9g20ek_dai,
+	.num_links = 1,
+	.set_bias_level = at91sam9g20ek_set_bias_level,
+
+	.dapm_widgets = at91sam9g20ek_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
+	.dapm_routes = intercon,
+	.num_dapm_routes = ARRAY_SIZE(intercon),
+};
+
+static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	struct clk *pllb;
+	struct snd_soc_card *card = &snd_soc_at91sam9g20ek;
+	int ret;
+
+	if (!np) {
+		return -ENODEV;
+	}
+
+	ret = atmel_ssc_set_audio(0);
+	if (ret) {
+		dev_err(&pdev->dev, "ssc channel is not valid\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Codec MCLK is supplied by PCK0 - set it up.
+	 */
+	mclk = clk_get(NULL, "pck0");
+	if (IS_ERR(mclk)) {
+		printk(KERN_ERR "ASoC: Failed to get MCLK\n");
+		ret = PTR_ERR(mclk);
+		goto err;
+	}
+
+	pllb = clk_get(NULL, "pllb");
+	if (IS_ERR(pllb)) {
+		printk(KERN_ERR "ASoC: Failed to get PLLB\n");
+		ret = PTR_ERR(pllb);
+		goto err_mclk;
+	}
+	ret = clk_set_parent(mclk, pllb);
+	clk_put(pllb);
+	if (ret != 0) {
+		printk(KERN_ERR "ASoC: Failed to set MCLK parent\n");
+		goto err_mclk;
+	}
+
+	clk_set_rate(mclk, MCLK_RATE);
+
+	card->dev = &pdev->dev;
+
+	/* Parse device node info */
+	ret = snd_soc_of_parse_card_name(card, "atmel,model");
+	if (ret)
+		goto err;
+
+	ret = snd_soc_of_parse_audio_routing(card,
+		"atmel,audio-routing");
+	if (ret)
+		goto err;
+
+	/* Parse codec info */
+	at91sam9g20ek_dai.codec_name = NULL;
+	codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "codec info missing\n");
+		return -EINVAL;
+	}
+	at91sam9g20ek_dai.codec_of_node = codec_np;
+
+	/* Parse dai and platform info */
+	at91sam9g20ek_dai.cpu_dai_name = NULL;
+	at91sam9g20ek_dai.platform_name = NULL;
+	cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "dai and pcm info missing\n");
+		return -EINVAL;
+	}
+	at91sam9g20ek_dai.cpu_of_node = cpu_np;
+	at91sam9g20ek_dai.platform_of_node = cpu_np;
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		printk(KERN_ERR "ASoC: snd_soc_register_card() failed\n");
+	}
+
+	return ret;
+
+err_mclk:
+	clk_put(mclk);
+	mclk = NULL;
+err:
+	atmel_ssc_put_audio(0);
+	return ret;
+}
+
+static int at91sam9g20ek_audio_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	clk_disable(mclk);
+	mclk = NULL;
+	snd_soc_unregister_card(card);
+	atmel_ssc_put_audio(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id at91sam9g20ek_wm8731_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g20ek-wm8731-audio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, at91sam9g20ek_wm8731_dt_ids);
+#endif
+
+static struct platform_driver at91sam9g20ek_audio_driver = {
+	.driver = {
+		.name	= "at91sam9g20ek-audio",
+		.of_match_table = of_match_ptr(at91sam9g20ek_wm8731_dt_ids),
+	},
+	.probe	= at91sam9g20ek_audio_probe,
+	.remove	= at91sam9g20ek_audio_remove,
+};
+
+module_platform_driver(at91sam9g20ek_audio_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_ALIAS("platform:at91sam9g20ek-audio");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
new file mode 100644
index 000000000..ccdf547f4
--- /dev/null
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -0,0 +1,207 @@
+/*
+ * sam9x5_wm8731   --	SoC audio for AT91SAM9X5-based boards
+ *			that are using WM8731 as codec.
+ *
+ *  Copyright (C) 2011 Atmel,
+ *		  Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ *  Copyright (C) 2013 Paratronic,
+ *		  Richard Genoud <richard.genoud@gmail.com>
+ *
+ * Based on sam9g20_wm8731.c by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel_ssc_dai.h"
+
+
+#define MCLK_RATE 12288000
+
+#define DRV_NAME "sam9x5-snd-wm8731"
+
+struct sam9x5_drvdata {
+	int ssc_id;
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9x5ek based board.
+ */
+static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct device *dev = rtd->dev;
+	int ret;
+
+	dev_dbg(dev, "ASoC: %s called\n", __func__);
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+				     MCLK_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Audio paths on at91sam9x5ek board:
+ *
+ *  |A| ------------> |      | ---R----> Headphone Jack
+ *  |T| <----\        |  WM  | ---L--/
+ *  |9| ---> CLK <--> | 8731 | <--R----- Line In Jack
+ *  |1| <------------ |      | <--L--/
+ */
+static const struct snd_soc_dapm_widget sam9x5_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	struct snd_soc_card *card;
+	struct snd_soc_dai_link *dai;
+	struct sam9x5_drvdata *priv;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No device node supplied\n");
+		return -EINVAL;
+	}
+
+	card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL);
+	if (!dai || !card || !priv) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	snd_soc_card_set_drvdata(card, priv);
+
+	card->dev = &pdev->dev;
+	card->owner = THIS_MODULE;
+	card->dai_link = dai;
+	card->num_links = 1;
+	card->dapm_widgets = sam9x5_dapm_widgets;
+	card->num_dapm_widgets = ARRAY_SIZE(sam9x5_dapm_widgets);
+	dai->name = "WM8731";
+	dai->stream_name = "WM8731 PCM";
+	dai->codec_dai_name = "wm8731-hifi";
+	dai->init = sam9x5_wm8731_init;
+	dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF
+		| SND_SOC_DAIFMT_CBM_CFM;
+
+	ret = snd_soc_of_parse_card_name(card, "atmel,model");
+	if (ret) {
+		dev_err(&pdev->dev, "atmel,model node missing\n");
+		goto out;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "atmel,audio-routing node missing\n");
+		goto out;
+	}
+
+	codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "atmel,audio-codec node missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	dai->codec_of_node = codec_np;
+
+	cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "atmel,ssc-controller node missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	dai->cpu_of_node = cpu_np;
+	dai->platform_of_node = cpu_np;
+
+	priv->ssc_id = of_alias_get_id(cpu_np, "ssc");
+
+	ret = atmel_ssc_set_audio(priv->ssc_id);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"ASoC: Failed to set SSC %d for audio: %d\n",
+			ret, priv->ssc_id);
+		goto out;
+	}
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	ret = snd_soc_register_card(card);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"ASoC: Platform device allocation failed\n");
+		goto out_put_audio;
+	}
+
+	dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__);
+
+	return ret;
+
+out_put_audio:
+	atmel_ssc_put_audio(priv->ssc_id);
+out:
+	return ret;
+}
+
+static int sam9x5_wm8731_driver_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct sam9x5_drvdata *priv = card->drvdata;
+
+	snd_soc_unregister_card(card);
+	atmel_ssc_put_audio(priv->ssc_id);
+
+	return 0;
+}
+
+static const struct of_device_id sam9x5_wm8731_of_match[] = {
+	{ .compatible = "atmel,sam9x5-wm8731-audio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match);
+
+static struct platform_driver sam9x5_wm8731_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(sam9x5_wm8731_of_match),
+	},
+	.probe = sam9x5_wm8731_driver_probe,
+	.remove = sam9x5_wm8731_driver_remove,
+};
+module_platform_driver(sam9x5_wm8731_driver);
+
+/* Module information */
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);